1 /* 2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> 3 <http://rt2x00.serialmonkey.com> 4 5 This program is free software; you can redistribute it and/or modify 6 it under the terms of the GNU General Public License as published by 7 the Free Software Foundation; either version 2 of the License, or 8 (at your option) any later version. 9 10 This program is distributed in the hope that it will be useful, 11 but WITHOUT ANY WARRANTY; without even the implied warranty of 12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 GNU General Public License for more details. 14 15 You should have received a copy of the GNU General Public License 16 along with this program; if not, see <http://www.gnu.org/licenses/>. 17 */ 18 19 /* 20 Module: rt2x00dump 21 Abstract: 22 Data structures for the rt2x00debug & userspace. 23 24 The declarations in this file can be used by both rt2x00 25 and userspace and therefore should be kept together in 26 this file. 27 */ 28 29 #ifndef RT2X00DUMP_H 30 #define RT2X00DUMP_H 31 32 /** 33 * DOC: Introduction 34 * 35 * This header is intended to be exported to userspace, 36 * to make the structures and enumerations available to userspace 37 * applications. This means that all data types should be exportable. 38 * 39 * When rt2x00 is compiled with debugfs support enabled, 40 * it is possible to capture all data coming in and out of the device 41 * by reading the frame dump file. This file can have only a single reader. 42 * The following frames will be reported: 43 * - All incoming frames (rx) 44 * - All outgoing frames (tx, including beacon and atim) 45 * - All completed frames (txdone including atim) 46 * 47 * The data is send to the file using the following format: 48 * 49 * [rt2x00dump header][hardware descriptor][ieee802.11 frame] 50 * 51 * rt2x00dump header: The description of the dumped frame, as well as 52 * additional information useful for debugging. See &rt2x00dump_hdr. 53 * hardware descriptor: Descriptor that was used to receive or transmit 54 * the frame. 55 * ieee802.11 frame: The actual frame that was received or transmitted. 56 */ 57 58 /** 59 * enum rt2x00_dump_type - Frame type 60 * 61 * These values are used for the @type member of &rt2x00dump_hdr. 62 * @DUMP_FRAME_RXDONE: This frame has been received by the hardware. 63 * @DUMP_FRAME_TX: This frame is queued for transmission to the hardware. 64 * @DUMP_FRAME_TXDONE: This frame indicates the device has handled 65 * the tx event which has either succeeded or failed. A frame 66 * with this type should also have been reported with as a 67 * %DUMP_FRAME_TX frame. 68 * @DUMP_FRAME_BEACON: This beacon frame is queued for transmission to the 69 * hardware. 70 */ 71 enum rt2x00_dump_type { 72 DUMP_FRAME_RXDONE = 1, 73 DUMP_FRAME_TX = 2, 74 DUMP_FRAME_TXDONE = 3, 75 DUMP_FRAME_BEACON = 4, 76 }; 77 78 /** 79 * struct rt2x00dump_hdr - Dump frame header 80 * 81 * Each frame dumped to the debugfs file starts with this header 82 * attached. This header contains the description of the actual 83 * frame which was dumped. 84 * 85 * New fields inside the structure must be appended to the end of 86 * the structure. This way userspace tools compiled for earlier 87 * header versions can still correctly handle the frame dump 88 * (although they will not handle all data passed to them in the dump). 89 * 90 * @version: Header version should always be set to %DUMP_HEADER_VERSION. 91 * This field must be checked by userspace to determine if it can 92 * handle this frame. 93 * @header_length: The length of the &rt2x00dump_hdr structure. This is 94 * used for compatibility reasons so userspace can easily determine 95 * the location of the next field in the dump. 96 * @desc_length: The length of the device descriptor. 97 * @data_length: The length of the frame data (including the ieee802.11 header. 98 * @chip_rt: RT chipset 99 * @chip_rf: RF chipset 100 * @chip_rev: Chipset revision 101 * @type: The frame type (&rt2x00_dump_type) 102 * @queue_index: The index number of the data queue. 103 * @entry_index: The index number of the entry inside the data queue. 104 * @timestamp_sec: Timestamp - seconds 105 * @timestamp_usec: Timestamp - microseconds 106 */ 107 struct rt2x00dump_hdr { 108 __le32 version; 109 #define DUMP_HEADER_VERSION 3 110 111 __le32 header_length; 112 __le32 desc_length; 113 __le32 data_length; 114 115 __le16 chip_rt; 116 __le16 chip_rf; 117 __le16 chip_rev; 118 119 __le16 type; 120 __u8 queue_index; 121 __u8 entry_index; 122 123 __le32 timestamp_sec; 124 __le32 timestamp_usec; 125 }; 126 127 #endif /* RT2X00DUMP_H */ 128