1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * (c) Copyright 2002-2010, Ralink Technology, Inc.
4  * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
5  * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
6  */
7 
8 #include "mt7601u.h"
9 #include "mcu.h"
10 #include "eeprom.h"
11 #include "trace.h"
12 #include "initvals_phy.h"
13 
14 #include <linux/etherdevice.h>
15 
16 static void mt7601u_agc_reset(struct mt7601u_dev *dev);
17 
18 static int
19 mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value)
20 {
21 	int ret = 0;
22 
23 	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
24 	    WARN_ON(offset > 63))
25 		return -EINVAL;
26 	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
27 		return 0;
28 
29 	mutex_lock(&dev->reg_atomic_mutex);
30 
31 	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) {
32 		ret = -ETIMEDOUT;
33 		goto out;
34 	}
35 
36 	mt7601u_wr(dev, MT_RF_CSR_CFG,
37 		   FIELD_PREP(MT_RF_CSR_CFG_DATA, value) |
38 		   FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
39 		   FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) |
40 		   MT_RF_CSR_CFG_WR |
41 		   MT_RF_CSR_CFG_KICK);
42 	trace_rf_write(dev, bank, offset, value);
43 out:
44 	mutex_unlock(&dev->reg_atomic_mutex);
45 
46 	if (ret < 0)
47 		dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n",
48 			bank, offset, ret);
49 
50 	return ret;
51 }
52 
53 static int
54 mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset)
55 {
56 	int ret = -ETIMEDOUT;
57 	u32 val;
58 
59 	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
60 	    WARN_ON(offset > 63))
61 		return -EINVAL;
62 	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
63 		return 0xff;
64 
65 	mutex_lock(&dev->reg_atomic_mutex);
66 
67 	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
68 		goto out;
69 
70 	mt7601u_wr(dev, MT_RF_CSR_CFG,
71 		   FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
72 		   FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) |
73 		   MT_RF_CSR_CFG_KICK);
74 
75 	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
76 		goto out;
77 
78 	val = mt7601u_rr(dev, MT_RF_CSR_CFG);
79 	if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == offset &&
80 	    FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) {
81 		ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val);
82 		trace_rf_read(dev, bank, offset, ret);
83 	}
84 out:
85 	mutex_unlock(&dev->reg_atomic_mutex);
86 
87 	if (ret < 0)
88 		dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n",
89 			bank, offset, ret);
90 
91 	return ret;
92 }
93 
94 static int
95 mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val)
96 {
97 	int ret;
98 
99 	ret = mt7601u_rf_rr(dev, bank, offset);
100 	if (ret < 0)
101 		return ret;
102 	val |= ret & ~mask;
103 	ret = mt7601u_rf_wr(dev, bank, offset, val);
104 	if (ret)
105 		return ret;
106 
107 	return val;
108 }
109 
110 static int
111 mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val)
112 {
113 	return mt7601u_rf_rmw(dev, bank, offset, 0, val);
114 }
115 
116 static int
117 mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask)
118 {
119 	return mt7601u_rf_rmw(dev, bank, offset, mask, 0);
120 }
121 
122 static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val)
123 {
124 	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
125 	    test_bit(MT7601U_STATE_REMOVED, &dev->state))
126 		return;
127 
128 	mutex_lock(&dev->reg_atomic_mutex);
129 
130 	if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) {
131 		dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset);
132 		goto out;
133 	}
134 
135 	mt7601u_wr(dev, MT_BBP_CSR_CFG,
136 		   FIELD_PREP(MT_BBP_CSR_CFG_VAL, val) |
137 		   FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) |
138 		   MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY);
139 	trace_bbp_write(dev, offset, val);
140 out:
141 	mutex_unlock(&dev->reg_atomic_mutex);
142 }
143 
144 static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset)
145 {
146 	u32 val;
147 	int ret = -ETIMEDOUT;
148 
149 	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)))
150 		return -EINVAL;
151 	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
152 		return 0xff;
153 
154 	mutex_lock(&dev->reg_atomic_mutex);
155 
156 	if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
157 		goto out;
158 
159 	mt7601u_wr(dev, MT_BBP_CSR_CFG,
160 		   FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) |
161 		   MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY |
162 		   MT_BBP_CSR_CFG_READ);
163 
164 	if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
165 		goto out;
166 
167 	val = mt7601u_rr(dev, MT_BBP_CSR_CFG);
168 	if (FIELD_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) {
169 		ret = FIELD_GET(MT_BBP_CSR_CFG_VAL, val);
170 		trace_bbp_read(dev, offset, ret);
171 	}
172 out:
173 	mutex_unlock(&dev->reg_atomic_mutex);
174 
175 	if (ret < 0)
176 		dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n",
177 			offset, ret);
178 
179 	return ret;
180 }
181 
182 static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
183 {
184 	int ret;
185 
186 	ret = mt7601u_bbp_rr(dev, offset);
187 	if (ret < 0)
188 		return ret;
189 	val |= ret & ~mask;
190 	mt7601u_bbp_wr(dev, offset, val);
191 
192 	return val;
193 }
194 
195 static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
196 {
197 	int ret;
198 
199 	ret = mt7601u_bbp_rr(dev, offset);
200 	if (ret < 0)
201 		return ret;
202 	val |= ret & ~mask;
203 	if (ret != val)
204 		mt7601u_bbp_wr(dev, offset, val);
205 
206 	return val;
207 }
208 
209 int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)
210 {
211 	int i = 20;
212 	u8 val;
213 
214 	do {
215 		val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
216 		if (val && val != 0xff)
217 			break;
218 	} while (--i);
219 
220 	if (!i) {
221 		dev_err(dev->dev, "Error: BBP is not ready\n");
222 		return -EIO;
223 	}
224 
225 	return 0;
226 }
227 
228 u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below)
229 {
230 	return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0);
231 }
232 
233 int mt7601u_phy_get_rssi(struct mt7601u_dev *dev,
234 			 struct mt7601u_rxwi *rxwi, u16 rate)
235 {
236 	static const s8 lna[2][2][3] = {
237 		/* main LNA */ {
238 			/* bw20 */ { -2, 15, 33 },
239 			/* bw40 */ {  0, 16, 34 }
240 		},
241 		/*  aux LNA */ {
242 			/* bw20 */ { -2, 15, 33 },
243 			/* bw40 */ { -2, 16, 34 }
244 		}
245 	};
246 	int bw = FIELD_GET(MT_RXWI_RATE_BW, rate);
247 	int aux_lna = FIELD_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant);
248 	int lna_id = FIELD_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain);
249 	int val;
250 
251 	if (lna_id) /* LNA id can be 0, 2, 3. */
252 		lna_id--;
253 
254 	val = 8;
255 	val -= lna[aux_lna][bw][lna_id];
256 	val -= FIELD_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain);
257 	val -= dev->ee->lna_gain;
258 	val -= dev->ee->rssi_offset[0];
259 
260 	return val;
261 }
262 
263 static void mt7601u_vco_cal(struct mt7601u_dev *dev)
264 {
265 	mt7601u_rf_wr(dev, 0, 4, 0x0a);
266 	mt7601u_rf_wr(dev, 0, 5, 0x20);
267 	mt7601u_rf_set(dev, 0, 4, BIT(7));
268 	msleep(2);
269 }
270 
271 static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal)
272 {
273 	u32 filter = 0;
274 	int ret;
275 
276 	if (!cal)
277 		filter |= 0x10000;
278 	if (dev->bw != MT_BW_20)
279 		filter |= 0x00100;
280 
281 	/* TX */
282 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1);
283 	if (ret)
284 		return ret;
285 	/* RX */
286 	return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter);
287 }
288 
289 static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev)
290 {
291 	const struct reg_table *t;
292 
293 	if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW))
294 		return -EINVAL;
295 
296 	t = &bbp_mode_table[dev->temp_mode][dev->bw];
297 
298 	return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n);
299 }
300 
301 static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name)
302 {
303 	const struct reg_table *t;
304 	int ret;
305 
306 	if (dev->temp_mode == mode)
307 		return 0;
308 
309 	dev->temp_mode = mode;
310 	trace_temp_mode(dev, mode);
311 
312 	t = bbp_mode_table[dev->temp_mode];
313 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
314 				      t[2].regs, t[2].n);
315 	if (ret)
316 		return ret;
317 
318 	return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
319 				       t[dev->bw].regs, t[dev->bw].n);
320 }
321 
322 static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan)
323 {
324 	struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
325 
326 	if (hw_chan != 14 || dev->bw != MT_BW_20) {
327 		mt7601u_bbp_rmw(dev, 4, 0x20, 0);
328 		mt7601u_bbp_wr(dev, 178, 0xff);
329 
330 		t->cck[0].bw20 = dev->ee->real_cck_bw20[0];
331 		t->cck[1].bw20 = dev->ee->real_cck_bw20[1];
332 	} else { /* Apply CH14 OBW fixup */
333 		mt7601u_bbp_wr(dev, 4, 0x60);
334 		mt7601u_bbp_wr(dev, 178, 0);
335 
336 		/* Note: vendor code is buggy here for negative values */
337 		t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2;
338 		t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2;
339 	}
340 }
341 
342 static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev,
343 				     struct cfg80211_chan_def *chandef)
344 {
345 #define FREQ_PLAN_REGS	4
346 	static const u8 freq_plan[14][FREQ_PLAN_REGS] = {
347 		{ 0x99,	0x99,	0x09,	0x50 },
348 		{ 0x46,	0x44,	0x0a,	0x50 },
349 		{ 0xec,	0xee,	0x0a,	0x50 },
350 		{ 0x99,	0x99,	0x0b,	0x50 },
351 		{ 0x46,	0x44,	0x08,	0x51 },
352 		{ 0xec,	0xee,	0x08,	0x51 },
353 		{ 0x99,	0x99,	0x09,	0x51 },
354 		{ 0x46,	0x44,	0x0a,	0x51 },
355 		{ 0xec,	0xee,	0x0a,	0x51 },
356 		{ 0x99,	0x99,	0x0b,	0x51 },
357 		{ 0x46,	0x44,	0x08,	0x52 },
358 		{ 0xec,	0xee,	0x08,	0x52 },
359 		{ 0x99,	0x99,	0x09,	0x52 },
360 		{ 0x33,	0x33,	0x0b,	0x52 },
361 	};
362 	struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = {
363 		{ 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 },
364 	};
365 	struct mt76_reg_pair bbp_settings[3] = {
366 		{ 62, 0x37 - dev->ee->lna_gain },
367 		{ 63, 0x37 - dev->ee->lna_gain },
368 		{ 64, 0x37 - dev->ee->lna_gain },
369 	};
370 
371 	struct ieee80211_channel *chan = chandef->chan;
372 	enum nl80211_channel_type chan_type =
373 		cfg80211_get_chandef_type(chandef);
374 	struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
375 	int chan_idx;
376 	bool chan_ext_below;
377 	u8 bw;
378 	int i, ret;
379 
380 	bw = MT_BW_20;
381 	chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS);
382 	chan_idx = chan->hw_value - 1;
383 
384 	if (chandef->width == NL80211_CHAN_WIDTH_40) {
385 		bw = MT_BW_40;
386 
387 		if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS)
388 			chan_idx -= 2;
389 		else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS)
390 			chan_idx += 2;
391 		else
392 			dev_err(dev->dev, "Error: invalid 40MHz channel!!\n");
393 	}
394 
395 	if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) {
396 		dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n",
397 			bw, chan_ext_below);
398 
399 		mt7601u_bbp_set_bw(dev, bw);
400 
401 		mt7601u_bbp_set_ctrlch(dev, chan_ext_below);
402 		mt7601u_mac_set_ctrlch(dev, chan_ext_below);
403 		dev->chan_ext_below = chan_ext_below;
404 	}
405 
406 	for (i = 0; i < FREQ_PLAN_REGS; i++)
407 		channel_freq_plan[i].value = freq_plan[chan_idx][i];
408 
409 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF,
410 				      channel_freq_plan, FREQ_PLAN_REGS);
411 	if (ret)
412 		return ret;
413 
414 	mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f,
415 		    dev->ee->chan_pwr[chan_idx] & 0x3f);
416 
417 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
418 				      bbp_settings, ARRAY_SIZE(bbp_settings));
419 	if (ret)
420 		return ret;
421 
422 	mt7601u_vco_cal(dev);
423 	mt7601u_bbp_set_bw(dev, bw);
424 	ret = mt7601u_set_bw_filter(dev, false);
425 	if (ret)
426 		return ret;
427 
428 	mt7601u_apply_ch14_fixup(dev, chan->hw_value);
429 	mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 |
430 					 int_to_s6(t->ofdm[0].bw20) << 16 |
431 					 int_to_s6(t->cck[1].bw20) << 8 |
432 					 int_to_s6(t->cck[0].bw20));
433 
434 	if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
435 		mt7601u_agc_reset(dev);
436 
437 	dev->chandef = *chandef;
438 
439 	return 0;
440 }
441 
442 int mt7601u_phy_set_channel(struct mt7601u_dev *dev,
443 			    struct cfg80211_chan_def *chandef)
444 {
445 	int ret;
446 
447 	cancel_delayed_work_sync(&dev->cal_work);
448 	cancel_delayed_work_sync(&dev->freq_cal.work);
449 
450 	mutex_lock(&dev->hw_atomic_mutex);
451 	ret = __mt7601u_phy_set_channel(dev, chandef);
452 	mutex_unlock(&dev->hw_atomic_mutex);
453 	if (ret)
454 		return ret;
455 
456 	if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
457 		return 0;
458 
459 	ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
460 				     MT_CALIBRATE_INTERVAL);
461 	if (dev->freq_cal.enabled)
462 		ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
463 					     MT_FREQ_CAL_INIT_DELAY);
464 	return 0;
465 }
466 
467 #define BBP_R47_FLAG		GENMASK(2, 0)
468 #define BBP_R47_F_TSSI		0
469 #define BBP_R47_F_PKT_T		1
470 #define BBP_R47_F_TX_RATE	2
471 #define BBP_R47_F_TEMP		4
472 /**
473  * mt7601u_bbp_r47_get - read value through BBP R47/R49 pair
474  * @dev:	pointer to adapter structure
475  * @reg:	value of BBP R47 before the operation
476  * @flag:	one of the BBP_R47_F_* flags
477  *
478  * Convenience helper for reading values through BBP R47/R49 pair.
479  * Takes old value of BBP R47 as @reg, because callers usually have it
480  * cached already.
481  *
482  * Return: value of BBP R49.
483  */
484 static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag)
485 {
486 	flag |= reg & ~BBP_R47_FLAG;
487 	mt7601u_bbp_wr(dev, 47, flag);
488 	usleep_range(500, 700);
489 	return mt7601u_bbp_rr(dev, 49);
490 }
491 
492 static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev)
493 {
494 	u8 bbp_val, temp;
495 	u32 rf_bp, rf_set;
496 	int i;
497 
498 	rf_set = mt7601u_rr(dev, MT_RF_SETTING_0);
499 	rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0);
500 
501 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
502 	mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010);
503 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010);
504 
505 	bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10);
506 
507 	mt7601u_bbp_wr(dev, 22, 0x40);
508 
509 	for (i = 100; i && (bbp_val & 0x10); i--)
510 		bbp_val = mt7601u_bbp_rr(dev, 47);
511 
512 	temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP);
513 
514 	mt7601u_bbp_wr(dev, 22, 0);
515 
516 	bbp_val = mt7601u_bbp_rr(dev, 21);
517 	bbp_val |= 0x02;
518 	mt7601u_bbp_wr(dev, 21, bbp_val);
519 	bbp_val &= ~0x02;
520 	mt7601u_bbp_wr(dev, 21, bbp_val);
521 
522 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
523 	mt7601u_wr(dev, MT_RF_SETTING_0, rf_set);
524 	mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp);
525 
526 	trace_read_temp(dev, temp);
527 	return temp;
528 }
529 
530 static s8 mt7601u_read_temp(struct mt7601u_dev *dev)
531 {
532 	int i;
533 	u8 val;
534 	s8 temp;
535 
536 	val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10);
537 
538 	/* Note: this rarely succeeds, temp can change even if it fails. */
539 	for (i = 100; i && (val & 0x10); i--)
540 		val = mt7601u_bbp_rr(dev, 47);
541 
542 	temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP);
543 
544 	trace_read_temp(dev, temp);
545 	return temp;
546 }
547 
548 static void mt7601u_rxdc_cal(struct mt7601u_dev *dev)
549 {
550 	static const struct mt76_reg_pair intro[] = {
551 		{ 158, 0x8d }, { 159, 0xfc },
552 		{ 158, 0x8c }, { 159, 0x4c },
553 	}, outro[] = {
554 		{ 158, 0x8d }, { 159, 0xe0 },
555 	};
556 	u32 mac_ctrl;
557 	int i, ret;
558 
559 	mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
560 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX);
561 
562 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
563 				      intro, ARRAY_SIZE(intro));
564 	if (ret)
565 		dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret);
566 
567 	for (i = 20; i; i--) {
568 		usleep_range(300, 500);
569 
570 		mt7601u_bbp_wr(dev, 158, 0x8c);
571 		if (mt7601u_bbp_rr(dev, 159) == 0x0c)
572 			break;
573 	}
574 	if (!i)
575 		dev_err(dev->dev, "%s timed out\n", __func__);
576 
577 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
578 
579 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
580 				      outro, ARRAY_SIZE(outro));
581 	if (ret)
582 		dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret);
583 
584 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
585 }
586 
587 void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev)
588 {
589 	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
590 		return;
591 
592 	mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp);
593 
594 	mt7601u_rxdc_cal(dev);
595 }
596 
597 /* Note: function copied from vendor driver */
598 static s16 lin2dBd(u16 linear)
599 {
600 	short exp = 0;
601 	unsigned int mantisa;
602 	int app, dBd;
603 
604 	if (WARN_ON(!linear))
605 		return -10000;
606 
607 	mantisa = linear;
608 
609 	exp = fls(mantisa) - 16;
610 	if (exp > 0)
611 		mantisa >>= exp;
612 	else
613 		mantisa <<= abs(exp);
614 
615 	if (mantisa <= 0xb800)
616 		app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600);
617 	else
618 		app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00);
619 	if (app < 0)
620 		app = 0;
621 
622 	dBd = ((15 + exp) << 15) + app;
623 	dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7);
624 	dBd = (dBd >> 10);
625 
626 	return dBd;
627 }
628 
629 static void
630 mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db)
631 {
632 	struct tssi_data *d = &dev->ee->tssi_data;
633 	int init_offset;
634 
635 	init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10;
636 
637 	mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
638 		 int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP);
639 }
640 
641 static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev)
642 {
643 	u8 rf_vga, rf_mixer, bbp_r47;
644 	int i, j;
645 	s8 res[4];
646 	s16 tssi_init_db, tssi_init_hvga_db;
647 
648 	mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030);
649 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030);
650 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
651 
652 	mt7601u_bbp_wr(dev, 58, 0);
653 	mt7601u_bbp_wr(dev, 241, 0x2);
654 	mt7601u_bbp_wr(dev, 23, 0x8);
655 	bbp_r47 = mt7601u_bbp_rr(dev, 47);
656 
657 	/* Set VGA gain */
658 	rf_vga = mt7601u_rf_rr(dev, 5, 3);
659 	mt7601u_rf_wr(dev, 5, 3, 8);
660 
661 	/* Mixer disable */
662 	rf_mixer = mt7601u_rf_rr(dev, 4, 39);
663 	mt7601u_rf_wr(dev, 4, 39, 0);
664 
665 	for (i = 0; i < 4; i++) {
666 		mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0);
667 
668 		mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02);
669 		mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11);
670 
671 		/* BBP TSSI initial and soft reset */
672 		mt7601u_bbp_wr(dev, 22, 0);
673 		mt7601u_bbp_wr(dev, 244, 0);
674 
675 		mt7601u_bbp_wr(dev, 21, 1);
676 		udelay(1);
677 		mt7601u_bbp_wr(dev, 21, 0);
678 
679 		/* TSSI measurement */
680 		mt7601u_bbp_wr(dev, 47, 0x50);
681 		mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40);
682 
683 		for (j = 20; j; j--)
684 			if (!(mt7601u_bbp_rr(dev, 47) & 0x10))
685 				break;
686 		if (!j)
687 			dev_err(dev->dev, "%s timed out\n", __func__);
688 
689 		/* TSSI read */
690 		mt7601u_bbp_wr(dev, 47, 0x40);
691 		res[i] = mt7601u_bbp_rr(dev, 49);
692 	}
693 
694 	tssi_init_db = lin2dBd((short)res[1] - res[0]);
695 	tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4);
696 	dev->tssi_init = res[0];
697 	dev->tssi_init_hvga = res[2];
698 	dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db;
699 
700 	dev_dbg(dev->dev,
701 		"TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n",
702 		dev->tssi_init, tssi_init_db, dev->tssi_init_hvga,
703 		tssi_init_hvga_db, dev->tssi_init_hvga_offset_db);
704 
705 	mt7601u_bbp_wr(dev, 22, 0);
706 	mt7601u_bbp_wr(dev, 244, 0);
707 
708 	mt7601u_bbp_wr(dev, 21, 1);
709 	udelay(1);
710 	mt7601u_bbp_wr(dev, 21, 0);
711 
712 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
713 	mt7601u_wr(dev, MT_RF_SETTING_0, 0);
714 
715 	mt7601u_rf_wr(dev, 5, 3, rf_vga);
716 	mt7601u_rf_wr(dev, 4, 39, rf_mixer);
717 	mt7601u_bbp_wr(dev, 47, bbp_r47);
718 
719 	mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db);
720 }
721 
722 static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on)
723 {
724 	int ret, temp, hi_temp = 400, lo_temp = -200;
725 
726 	temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE;
727 	dev->curr_temp = temp;
728 
729 	/* DPD Calibration */
730 	if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) {
731 		dev->dpd_temp = temp;
732 
733 		ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
734 		if (ret)
735 			return ret;
736 
737 		mt7601u_vco_cal(dev);
738 
739 		dev_dbg(dev->dev, "Recalibrate DPD\n");
740 	}
741 
742 	/* PLL Lock Protect */
743 	if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */
744 		dev->pll_lock_protect =  true;
745 
746 		mt7601u_rf_wr(dev, 4, 4, 6);
747 		mt7601u_rf_clear(dev, 4, 10, 0x30);
748 
749 		dev_dbg(dev->dev, "PLL lock protect on - too cold\n");
750 	} else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */
751 		dev->pll_lock_protect = false;
752 
753 		mt7601u_rf_wr(dev, 4, 4, 0);
754 		mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10);
755 
756 		dev_dbg(dev->dev, "PLL lock protect off\n");
757 	}
758 
759 	if (on) {
760 		hi_temp -= 50;
761 		lo_temp -= 50;
762 	}
763 
764 	/* BBP CR for H, L, N temperature */
765 	if (temp > hi_temp)
766 		return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high");
767 	else if (temp > lo_temp)
768 		return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal");
769 	else
770 		return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low");
771 }
772 
773 /* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */
774 static int mt7601u_current_tx_power(struct mt7601u_dev *dev)
775 {
776 	return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1];
777 }
778 
779 static bool mt7601u_use_hvga(struct mt7601u_dev *dev)
780 {
781 	return !(mt7601u_current_tx_power(dev) > 20);
782 }
783 
784 static s16
785 mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate)
786 {
787 	static const s16 decode_tb[] = { 0, 8847, -5734, -5734 };
788 	u32 reg;
789 
790 	switch (phy_mode) {
791 	case MT_PHY_TYPE_OFDM:
792 		tx_rate += 4;
793 		fallthrough;
794 	case MT_PHY_TYPE_CCK:
795 		reg = dev->rf_pa_mode[0];
796 		break;
797 	default:
798 		reg = dev->rf_pa_mode[1];
799 		break;
800 	}
801 
802 	return decode_tb[(reg >> (tx_rate * 2)) & 0x3];
803 }
804 
805 static struct mt7601u_tssi_params
806 mt7601u_tssi_params_get(struct mt7601u_dev *dev)
807 {
808 	static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 };
809 	static const int static_power[4] = { 0, -49152, -98304, 49152 };
810 	struct mt7601u_tssi_params p;
811 	u8 bbp_r47, pkt_type, tx_rate;
812 	struct power_per_rate *rate_table;
813 
814 	bbp_r47 = mt7601u_bbp_rr(dev, 47);
815 
816 	p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI);
817 	dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP);
818 	pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T);
819 
820 	p.trgt_power = mt7601u_current_tx_power(dev);
821 
822 	switch (pkt_type & 0x03) {
823 	case MT_PHY_TYPE_CCK:
824 		tx_rate = (pkt_type >> 4) & 0x03;
825 		rate_table = dev->ee->power_rate_table.cck;
826 		break;
827 
828 	case MT_PHY_TYPE_OFDM:
829 		tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07];
830 		rate_table = dev->ee->power_rate_table.ofdm;
831 		break;
832 
833 	default:
834 		tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE);
835 		tx_rate &= 0x7f;
836 		rate_table = dev->ee->power_rate_table.ht;
837 		break;
838 	}
839 
840 	if (dev->bw == MT_BW_20)
841 		p.trgt_power += rate_table[tx_rate / 2].bw20;
842 	else
843 		p.trgt_power += rate_table[tx_rate / 2].bw40;
844 
845 	p.trgt_power <<= 12;
846 
847 	dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power);
848 
849 	p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03,
850 						   tx_rate);
851 
852 	/* Channel 14, cck, bw20 */
853 	if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) {
854 		if (mt7601u_bbp_rr(dev, 4) & 0x20)
855 			p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830;
856 		else
857 			p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576;
858 	}
859 
860 	p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03];
861 
862 	p.trgt_power += dev->ee->tssi_data.tx0_delta_offset;
863 
864 	dev_dbg(dev->dev,
865 		"tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n",
866 		p.tssi0, p.trgt_power, dev->raw_temp, pkt_type);
867 
868 	return p;
869 }
870 
871 static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev)
872 {
873 	return !(mt7601u_bbp_rr(dev, 47) & 0x10);
874 }
875 
876 static int mt7601u_tssi_cal(struct mt7601u_dev *dev)
877 {
878 	struct mt7601u_tssi_params params;
879 	int curr_pwr, diff_pwr;
880 	char tssi_offset;
881 	s8 tssi_init;
882 	s16 tssi_m_dc, tssi_db;
883 	bool hvga;
884 	u32 val;
885 
886 	if (!dev->ee->tssi_enabled)
887 		return 0;
888 
889 	hvga = mt7601u_use_hvga(dev);
890 	if (!dev->tssi_read_trig)
891 		return mt7601u_mcu_tssi_read_kick(dev, hvga);
892 
893 	if (!mt7601u_tssi_read_ready(dev))
894 		return 0;
895 
896 	params = mt7601u_tssi_params_get(dev);
897 
898 	tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init);
899 	tssi_m_dc = params.tssi0 - tssi_init;
900 	tssi_db = lin2dBd(tssi_m_dc);
901 	dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n",
902 		tssi_m_dc, tssi_db, hvga);
903 
904 	if (dev->chandef.chan->hw_value < 5)
905 		tssi_offset = dev->ee->tssi_data.offset[0];
906 	else if (dev->chandef.chan->hw_value < 9)
907 		tssi_offset = dev->ee->tssi_data.offset[1];
908 	else
909 		tssi_offset = dev->ee->tssi_data.offset[2];
910 
911 	if (hvga)
912 		tssi_db -= dev->tssi_init_hvga_offset_db;
913 
914 	curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9);
915 	diff_pwr = params.trgt_power - curr_pwr;
916 	dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr);
917 
918 	if (params.tssi0 > 126 && diff_pwr > 0) {
919 		dev_err(dev->dev, "Error: TSSI upper saturation\n");
920 		diff_pwr = 0;
921 	}
922 	if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) {
923 		dev_err(dev->dev, "Error: TSSI lower saturation\n");
924 		diff_pwr = 0;
925 	}
926 
927 	if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 &&
928 	    (abs(diff_pwr) > abs(dev->prev_pwr_diff) ||
929 	     (diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff)))
930 		diff_pwr = 0;
931 	else
932 		dev->prev_pwr_diff = diff_pwr;
933 
934 	diff_pwr += (diff_pwr > 0) ? 2048 : -2048;
935 	diff_pwr /= 4096;
936 
937 	dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr);
938 
939 	val = mt7601u_rr(dev, MT_TX_ALC_CFG_1);
940 	curr_pwr = s6_to_int(FIELD_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val));
941 	diff_pwr += curr_pwr;
942 	val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr);
943 	mt7601u_wr(dev, MT_TX_ALC_CFG_1, val);
944 
945 	return mt7601u_mcu_tssi_read_kick(dev, hvga);
946 }
947 
948 static u8 mt7601u_agc_default(struct mt7601u_dev *dev)
949 {
950 	return (dev->ee->lna_gain - 8) * 2 + 0x34;
951 }
952 
953 static void mt7601u_agc_reset(struct mt7601u_dev *dev)
954 {
955 	u8 agc = mt7601u_agc_default(dev);
956 
957 	mt7601u_bbp_wr(dev, 66,	agc);
958 }
959 
960 void mt7601u_agc_save(struct mt7601u_dev *dev)
961 {
962 	dev->agc_save = mt7601u_bbp_rr(dev, 66);
963 }
964 
965 void mt7601u_agc_restore(struct mt7601u_dev *dev)
966 {
967 	mt7601u_bbp_wr(dev, 66, dev->agc_save);
968 }
969 
970 static void mt7601u_agc_tune(struct mt7601u_dev *dev)
971 {
972 	u8 val = mt7601u_agc_default(dev);
973 	long avg_rssi;
974 
975 	if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
976 		return;
977 
978 	/* Note: only in STA mode and not dozing; perhaps do this only if
979 	 *	 there is enough rssi updates since last run?
980 	 *	 Rssi updates are only on beacons and U2M so should work...
981 	 */
982 	spin_lock_bh(&dev->con_mon_lock);
983 	avg_rssi = ewma_rssi_read(&dev->avg_rssi);
984 	spin_unlock_bh(&dev->con_mon_lock);
985 	if (avg_rssi == 0)
986 		return;
987 
988 	avg_rssi = -avg_rssi;
989 	if (avg_rssi <= -70)
990 		val -= 0x20;
991 	else if (avg_rssi <= -60)
992 		val -= 0x10;
993 
994 	if (val != mt7601u_bbp_rr(dev, 66))
995 		mt7601u_bbp_wr(dev, 66, val);
996 
997 	/* TODO: also if lost a lot of beacons try resetting
998 	 *       (see RTMPSetAGCInitValue() call in mlme.c).
999 	 */
1000 }
1001 
1002 static void mt7601u_phy_calibrate(struct work_struct *work)
1003 {
1004 	struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
1005 					    cal_work.work);
1006 
1007 	mt7601u_agc_tune(dev);
1008 	mt7601u_tssi_cal(dev);
1009 	/* If TSSI calibration was run it already updated temperature. */
1010 	if (!dev->ee->tssi_enabled)
1011 		dev->raw_temp = mt7601u_read_temp(dev);
1012 	mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */
1013 
1014 	ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
1015 				     MT_CALIBRATE_INTERVAL);
1016 }
1017 
1018 static unsigned long
1019 __mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode)
1020 {
1021 	u8 activate_threshold, deactivate_threshold;
1022 
1023 	trace_freq_cal_offset(dev, phy_mode, last_offset);
1024 
1025 	/* No beacons received - reschedule soon */
1026 	if (last_offset == MT_FREQ_OFFSET_INVALID)
1027 		return MT_FREQ_CAL_ADJ_INTERVAL;
1028 
1029 	switch (phy_mode) {
1030 	case MT_PHY_TYPE_CCK:
1031 		activate_threshold = 19;
1032 		deactivate_threshold = 5;
1033 		break;
1034 	case MT_PHY_TYPE_OFDM:
1035 		activate_threshold = 102;
1036 		deactivate_threshold = 32;
1037 		break;
1038 	case MT_PHY_TYPE_HT:
1039 	case MT_PHY_TYPE_HT_GF:
1040 		activate_threshold = 82;
1041 		deactivate_threshold = 20;
1042 		break;
1043 	default:
1044 		WARN_ON(1);
1045 		return MT_FREQ_CAL_CHECK_INTERVAL;
1046 	}
1047 
1048 	if (abs(last_offset) >= activate_threshold)
1049 		dev->freq_cal.adjusting = true;
1050 	else if (abs(last_offset) <= deactivate_threshold)
1051 		dev->freq_cal.adjusting = false;
1052 
1053 	if (!dev->freq_cal.adjusting)
1054 		return MT_FREQ_CAL_CHECK_INTERVAL;
1055 
1056 	if (last_offset > deactivate_threshold) {
1057 		if (dev->freq_cal.freq > 0)
1058 			dev->freq_cal.freq--;
1059 		else
1060 			dev->freq_cal.adjusting = false;
1061 	} else if (last_offset < -deactivate_threshold) {
1062 		if (dev->freq_cal.freq < 0xbf)
1063 			dev->freq_cal.freq++;
1064 		else
1065 			dev->freq_cal.adjusting = false;
1066 	}
1067 
1068 	trace_freq_cal_adjust(dev, dev->freq_cal.freq);
1069 	mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq);
1070 	mt7601u_vco_cal(dev);
1071 
1072 	return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL :
1073 					 MT_FREQ_CAL_CHECK_INTERVAL;
1074 }
1075 
1076 static void mt7601u_phy_freq_cal(struct work_struct *work)
1077 {
1078 	struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
1079 					       freq_cal.work.work);
1080 	s8 last_offset;
1081 	u8 phy_mode;
1082 	unsigned long delay;
1083 
1084 	spin_lock_bh(&dev->con_mon_lock);
1085 	last_offset = dev->bcn_freq_off;
1086 	phy_mode = dev->bcn_phy_mode;
1087 	spin_unlock_bh(&dev->con_mon_lock);
1088 
1089 	delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode);
1090 	ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay);
1091 
1092 	spin_lock_bh(&dev->con_mon_lock);
1093 	dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
1094 	spin_unlock_bh(&dev->con_mon_lock);
1095 }
1096 
1097 void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev,
1098 			       struct ieee80211_bss_conf *info)
1099 {
1100 	struct ieee80211_vif *vif = container_of(info, struct ieee80211_vif,
1101 						 bss_conf);
1102 
1103 	if (!vif->cfg.assoc)
1104 		cancel_delayed_work_sync(&dev->freq_cal.work);
1105 
1106 	/* Start/stop collecting beacon data */
1107 	spin_lock_bh(&dev->con_mon_lock);
1108 	ether_addr_copy(dev->ap_bssid, info->bssid);
1109 	ewma_rssi_init(&dev->avg_rssi);
1110 	dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
1111 	spin_unlock_bh(&dev->con_mon_lock);
1112 
1113 	dev->freq_cal.freq = dev->ee->rf_freq_off;
1114 	dev->freq_cal.enabled = vif->cfg.assoc;
1115 	dev->freq_cal.adjusting = false;
1116 
1117 	if (vif->cfg.assoc)
1118 		ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
1119 					     MT_FREQ_CAL_INIT_DELAY);
1120 }
1121 
1122 static int mt7601u_init_cal(struct mt7601u_dev *dev)
1123 {
1124 	u32 mac_ctrl;
1125 	int ret;
1126 
1127 	dev->raw_temp = mt7601u_read_bootup_temp(dev);
1128 	dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) *
1129 		MT_EE_TEMPERATURE_SLOPE;
1130 	dev->dpd_temp = dev->curr_temp;
1131 
1132 	mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
1133 
1134 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0);
1135 	if (ret)
1136 		return ret;
1137 
1138 	ret = mt7601u_rf_rr(dev, 0, 4);
1139 	if (ret < 0)
1140 		return ret;
1141 	ret |= 0x80;
1142 	ret = mt7601u_rf_wr(dev, 0, 4, ret);
1143 	if (ret)
1144 		return ret;
1145 	msleep(2);
1146 
1147 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0);
1148 	if (ret)
1149 		return ret;
1150 
1151 	mt7601u_rxdc_cal(dev);
1152 
1153 	ret = mt7601u_set_bw_filter(dev, true);
1154 	if (ret)
1155 		return ret;
1156 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0);
1157 	if (ret)
1158 		return ret;
1159 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0);
1160 	if (ret)
1161 		return ret;
1162 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0);
1163 	if (ret)
1164 		return ret;
1165 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
1166 	if (ret)
1167 		return ret;
1168 
1169 	mt7601u_rxdc_cal(dev);
1170 
1171 	mt7601u_tssi_dc_gain_cal(dev);
1172 
1173 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
1174 
1175 	mt7601u_temp_comp(dev, true);
1176 
1177 	return 0;
1178 }
1179 
1180 int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw)
1181 {
1182 	u32 val, old;
1183 
1184 	if (bw == dev->bw) {
1185 		/* Vendor driver does the rmc even when no change is needed. */
1186 		mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
1187 
1188 		return 0;
1189 	}
1190 	dev->bw = bw;
1191 
1192 	/* Stop MAC for the time of bw change */
1193 	old = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
1194 	val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX);
1195 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, val);
1196 	mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX,
1197 		  0, 500000);
1198 
1199 	mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
1200 
1201 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, old);
1202 
1203 	return mt7601u_load_bbp_temp_table_bw(dev);
1204 }
1205 
1206 /**
1207  * mt7601u_set_rx_path - set rx path in BBP
1208  * @dev:	pointer to adapter structure
1209  * @path:	rx path to set values are 0-based
1210  */
1211 void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path)
1212 {
1213 	mt7601u_bbp_rmw(dev, 3, 0x18, path << 3);
1214 }
1215 
1216 /**
1217  * mt7601u_set_tx_dac - set which tx DAC to use
1218  * @dev:	pointer to adapter structure
1219  * @dac:	DAC index, values are 0-based
1220  */
1221 void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac)
1222 {
1223 	mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3);
1224 }
1225 
1226 int mt7601u_phy_init(struct mt7601u_dev *dev)
1227 {
1228 	int ret;
1229 
1230 	dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0);
1231 	dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1);
1232 
1233 	ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off);
1234 	if (ret)
1235 		return ret;
1236 	ret = mt7601u_write_reg_pairs(dev, 0, rf_central,
1237 				      ARRAY_SIZE(rf_central));
1238 	if (ret)
1239 		return ret;
1240 	ret = mt7601u_write_reg_pairs(dev, 0, rf_channel,
1241 				      ARRAY_SIZE(rf_channel));
1242 	if (ret)
1243 		return ret;
1244 	ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga));
1245 	if (ret)
1246 		return ret;
1247 
1248 	ret = mt7601u_init_cal(dev);
1249 	if (ret)
1250 		return ret;
1251 
1252 	dev->prev_pwr_diff = 100;
1253 
1254 	INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate);
1255 	INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal);
1256 
1257 	return 0;
1258 }
1259