1 /*
2  * (c) Copyright 2002-2010, Ralink Technology, Inc.
3  * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
4  * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2
8  * as published by the Free Software Foundation
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  */
15 
16 #include "mt7601u.h"
17 #include "mcu.h"
18 #include "eeprom.h"
19 #include "trace.h"
20 #include "initvals_phy.h"
21 
22 #include <linux/etherdevice.h>
23 
24 static void mt7601u_agc_reset(struct mt7601u_dev *dev);
25 
26 static int
27 mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value)
28 {
29 	int ret = 0;
30 
31 	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
32 	    WARN_ON(offset > 63))
33 		return -EINVAL;
34 	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
35 		return 0;
36 
37 	mutex_lock(&dev->reg_atomic_mutex);
38 
39 	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) {
40 		ret = -ETIMEDOUT;
41 		goto out;
42 	}
43 
44 	mt7601u_wr(dev, MT_RF_CSR_CFG,
45 		   FIELD_PREP(MT_RF_CSR_CFG_DATA, value) |
46 		   FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
47 		   FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) |
48 		   MT_RF_CSR_CFG_WR |
49 		   MT_RF_CSR_CFG_KICK);
50 	trace_rf_write(dev, bank, offset, value);
51 out:
52 	mutex_unlock(&dev->reg_atomic_mutex);
53 
54 	if (ret < 0)
55 		dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n",
56 			bank, offset, ret);
57 
58 	return ret;
59 }
60 
61 static int
62 mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset)
63 {
64 	int ret = -ETIMEDOUT;
65 	u32 val;
66 
67 	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
68 	    WARN_ON(offset > 63))
69 		return -EINVAL;
70 	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
71 		return 0xff;
72 
73 	mutex_lock(&dev->reg_atomic_mutex);
74 
75 	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
76 		goto out;
77 
78 	mt7601u_wr(dev, MT_RF_CSR_CFG,
79 		   FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
80 		   FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) |
81 		   MT_RF_CSR_CFG_KICK);
82 
83 	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
84 		goto out;
85 
86 	val = mt7601u_rr(dev, MT_RF_CSR_CFG);
87 	if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == offset &&
88 	    FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) {
89 		ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val);
90 		trace_rf_read(dev, bank, offset, ret);
91 	}
92 out:
93 	mutex_unlock(&dev->reg_atomic_mutex);
94 
95 	if (ret < 0)
96 		dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n",
97 			bank, offset, ret);
98 
99 	return ret;
100 }
101 
102 static int
103 mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val)
104 {
105 	int ret;
106 
107 	ret = mt7601u_rf_rr(dev, bank, offset);
108 	if (ret < 0)
109 		return ret;
110 	val |= ret & ~mask;
111 	ret = mt7601u_rf_wr(dev, bank, offset, val);
112 	if (ret)
113 		return ret;
114 
115 	return val;
116 }
117 
118 static int
119 mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val)
120 {
121 	return mt7601u_rf_rmw(dev, bank, offset, 0, val);
122 }
123 
124 static int
125 mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask)
126 {
127 	return mt7601u_rf_rmw(dev, bank, offset, mask, 0);
128 }
129 
130 static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val)
131 {
132 	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
133 	    test_bit(MT7601U_STATE_REMOVED, &dev->state))
134 		return;
135 
136 	mutex_lock(&dev->reg_atomic_mutex);
137 
138 	if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) {
139 		dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset);
140 		goto out;
141 	}
142 
143 	mt7601u_wr(dev, MT_BBP_CSR_CFG,
144 		   FIELD_PREP(MT_BBP_CSR_CFG_VAL, val) |
145 		   FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) |
146 		   MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY);
147 	trace_bbp_write(dev, offset, val);
148 out:
149 	mutex_unlock(&dev->reg_atomic_mutex);
150 }
151 
152 static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset)
153 {
154 	u32 val;
155 	int ret = -ETIMEDOUT;
156 
157 	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)))
158 		return -EINVAL;
159 	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
160 		return 0xff;
161 
162 	mutex_lock(&dev->reg_atomic_mutex);
163 
164 	if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
165 		goto out;
166 
167 	mt7601u_wr(dev, MT_BBP_CSR_CFG,
168 		   FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) |
169 		   MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY |
170 		   MT_BBP_CSR_CFG_READ);
171 
172 	if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
173 		goto out;
174 
175 	val = mt7601u_rr(dev, MT_BBP_CSR_CFG);
176 	if (FIELD_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) {
177 		ret = FIELD_GET(MT_BBP_CSR_CFG_VAL, val);
178 		trace_bbp_read(dev, offset, ret);
179 	}
180 out:
181 	mutex_unlock(&dev->reg_atomic_mutex);
182 
183 	if (ret < 0)
184 		dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n",
185 			offset, ret);
186 
187 	return ret;
188 }
189 
190 static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
191 {
192 	int ret;
193 
194 	ret = mt7601u_bbp_rr(dev, offset);
195 	if (ret < 0)
196 		return ret;
197 	val |= ret & ~mask;
198 	mt7601u_bbp_wr(dev, offset, val);
199 
200 	return val;
201 }
202 
203 static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
204 {
205 	int ret;
206 
207 	ret = mt7601u_bbp_rr(dev, offset);
208 	if (ret < 0)
209 		return ret;
210 	val |= ret & ~mask;
211 	if (ret != val)
212 		mt7601u_bbp_wr(dev, offset, val);
213 
214 	return val;
215 }
216 
217 int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)
218 {
219 	int i = 20;
220 	u8 val;
221 
222 	do {
223 		val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
224 		if (val && ~val)
225 			break;
226 	} while (--i);
227 
228 	if (!i) {
229 		dev_err(dev->dev, "Error: BBP is not ready\n");
230 		return -EIO;
231 	}
232 
233 	return 0;
234 }
235 
236 u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below)
237 {
238 	return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0);
239 }
240 
241 int mt7601u_phy_get_rssi(struct mt7601u_dev *dev,
242 			 struct mt7601u_rxwi *rxwi, u16 rate)
243 {
244 	static const s8 lna[2][2][3] = {
245 		/* main LNA */ {
246 			/* bw20 */ { -2, 15, 33 },
247 			/* bw40 */ {  0, 16, 34 }
248 		},
249 		/*  aux LNA */ {
250 			/* bw20 */ { -2, 15, 33 },
251 			/* bw40 */ { -2, 16, 34 }
252 		}
253 	};
254 	int bw = FIELD_GET(MT_RXWI_RATE_BW, rate);
255 	int aux_lna = FIELD_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant);
256 	int lna_id = FIELD_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain);
257 	int val;
258 
259 	if (lna_id) /* LNA id can be 0, 2, 3. */
260 		lna_id--;
261 
262 	val = 8;
263 	val -= lna[aux_lna][bw][lna_id];
264 	val -= FIELD_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain);
265 	val -= dev->ee->lna_gain;
266 	val -= dev->ee->rssi_offset[0];
267 
268 	return val;
269 }
270 
271 static void mt7601u_vco_cal(struct mt7601u_dev *dev)
272 {
273 	mt7601u_rf_wr(dev, 0, 4, 0x0a);
274 	mt7601u_rf_wr(dev, 0, 5, 0x20);
275 	mt7601u_rf_set(dev, 0, 4, BIT(7));
276 	msleep(2);
277 }
278 
279 static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal)
280 {
281 	u32 filter = 0;
282 	int ret;
283 
284 	if (!cal)
285 		filter |= 0x10000;
286 	if (dev->bw != MT_BW_20)
287 		filter |= 0x00100;
288 
289 	/* TX */
290 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1);
291 	if (ret)
292 		return ret;
293 	/* RX */
294 	return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter);
295 }
296 
297 static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev)
298 {
299 	const struct reg_table *t;
300 
301 	if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW))
302 		return -EINVAL;
303 
304 	t = &bbp_mode_table[dev->temp_mode][dev->bw];
305 
306 	return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n);
307 }
308 
309 static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name)
310 {
311 	const struct reg_table *t;
312 	int ret;
313 
314 	if (dev->temp_mode == mode)
315 		return 0;
316 
317 	dev->temp_mode = mode;
318 	trace_temp_mode(dev, mode);
319 
320 	t = bbp_mode_table[dev->temp_mode];
321 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
322 				      t[2].regs, t[2].n);
323 	if (ret)
324 		return ret;
325 
326 	return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
327 				       t[dev->bw].regs, t[dev->bw].n);
328 }
329 
330 static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan)
331 {
332 	struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
333 
334 	if (hw_chan != 14 || dev->bw != MT_BW_20) {
335 		mt7601u_bbp_rmw(dev, 4, 0x20, 0);
336 		mt7601u_bbp_wr(dev, 178, 0xff);
337 
338 		t->cck[0].bw20 = dev->ee->real_cck_bw20[0];
339 		t->cck[1].bw20 = dev->ee->real_cck_bw20[1];
340 	} else { /* Apply CH14 OBW fixup */
341 		mt7601u_bbp_wr(dev, 4, 0x60);
342 		mt7601u_bbp_wr(dev, 178, 0);
343 
344 		/* Note: vendor code is buggy here for negative values */
345 		t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2;
346 		t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2;
347 	}
348 }
349 
350 static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev,
351 				     struct cfg80211_chan_def *chandef)
352 {
353 #define FREQ_PLAN_REGS	4
354 	static const u8 freq_plan[14][FREQ_PLAN_REGS] = {
355 		{ 0x99,	0x99,	0x09,	0x50 },
356 		{ 0x46,	0x44,	0x0a,	0x50 },
357 		{ 0xec,	0xee,	0x0a,	0x50 },
358 		{ 0x99,	0x99,	0x0b,	0x50 },
359 		{ 0x46,	0x44,	0x08,	0x51 },
360 		{ 0xec,	0xee,	0x08,	0x51 },
361 		{ 0x99,	0x99,	0x09,	0x51 },
362 		{ 0x46,	0x44,	0x0a,	0x51 },
363 		{ 0xec,	0xee,	0x0a,	0x51 },
364 		{ 0x99,	0x99,	0x0b,	0x51 },
365 		{ 0x46,	0x44,	0x08,	0x52 },
366 		{ 0xec,	0xee,	0x08,	0x52 },
367 		{ 0x99,	0x99,	0x09,	0x52 },
368 		{ 0x33,	0x33,	0x0b,	0x52 },
369 	};
370 	struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = {
371 		{ 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 },
372 	};
373 	struct mt76_reg_pair bbp_settings[3] = {
374 		{ 62, 0x37 - dev->ee->lna_gain },
375 		{ 63, 0x37 - dev->ee->lna_gain },
376 		{ 64, 0x37 - dev->ee->lna_gain },
377 	};
378 
379 	struct ieee80211_channel *chan = chandef->chan;
380 	enum nl80211_channel_type chan_type =
381 		cfg80211_get_chandef_type(chandef);
382 	struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
383 	int chan_idx;
384 	bool chan_ext_below;
385 	u8 bw;
386 	int i, ret;
387 
388 	bw = MT_BW_20;
389 	chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS);
390 	chan_idx = chan->hw_value - 1;
391 
392 	if (chandef->width == NL80211_CHAN_WIDTH_40) {
393 		bw = MT_BW_40;
394 
395 		if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS)
396 			chan_idx -= 2;
397 		else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS)
398 			chan_idx += 2;
399 		else
400 			dev_err(dev->dev, "Error: invalid 40MHz channel!!\n");
401 	}
402 
403 	if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) {
404 		dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n",
405 			bw, chan_ext_below);
406 
407 		mt7601u_bbp_set_bw(dev, bw);
408 
409 		mt7601u_bbp_set_ctrlch(dev, chan_ext_below);
410 		mt7601u_mac_set_ctrlch(dev, chan_ext_below);
411 		dev->chan_ext_below = chan_ext_below;
412 	}
413 
414 	for (i = 0; i < FREQ_PLAN_REGS; i++)
415 		channel_freq_plan[i].value = freq_plan[chan_idx][i];
416 
417 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF,
418 				      channel_freq_plan, FREQ_PLAN_REGS);
419 	if (ret)
420 		return ret;
421 
422 	mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f,
423 		    dev->ee->chan_pwr[chan_idx] & 0x3f);
424 
425 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
426 				      bbp_settings, ARRAY_SIZE(bbp_settings));
427 	if (ret)
428 		return ret;
429 
430 	mt7601u_vco_cal(dev);
431 	mt7601u_bbp_set_bw(dev, bw);
432 	ret = mt7601u_set_bw_filter(dev, false);
433 	if (ret)
434 		return ret;
435 
436 	mt7601u_apply_ch14_fixup(dev, chan->hw_value);
437 	mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 |
438 					 int_to_s6(t->ofdm[0].bw20) << 16 |
439 					 int_to_s6(t->cck[1].bw20) << 8 |
440 					 int_to_s6(t->cck[0].bw20));
441 
442 	if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
443 		mt7601u_agc_reset(dev);
444 
445 	dev->chandef = *chandef;
446 
447 	return 0;
448 }
449 
450 int mt7601u_phy_set_channel(struct mt7601u_dev *dev,
451 			    struct cfg80211_chan_def *chandef)
452 {
453 	int ret;
454 
455 	cancel_delayed_work_sync(&dev->cal_work);
456 	cancel_delayed_work_sync(&dev->freq_cal.work);
457 
458 	mutex_lock(&dev->hw_atomic_mutex);
459 	ret = __mt7601u_phy_set_channel(dev, chandef);
460 	mutex_unlock(&dev->hw_atomic_mutex);
461 	if (ret)
462 		return ret;
463 
464 	if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
465 		return 0;
466 
467 	ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
468 				     MT_CALIBRATE_INTERVAL);
469 	if (dev->freq_cal.enabled)
470 		ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
471 					     MT_FREQ_CAL_INIT_DELAY);
472 	return 0;
473 }
474 
475 #define BBP_R47_FLAG		GENMASK(2, 0)
476 #define BBP_R47_F_TSSI		0
477 #define BBP_R47_F_PKT_T		1
478 #define BBP_R47_F_TX_RATE	2
479 #define BBP_R47_F_TEMP		4
480 /**
481  * mt7601u_bbp_r47_get - read value through BBP R47/R49 pair
482  * @dev:	pointer to adapter structure
483  * @reg:	value of BBP R47 before the operation
484  * @flag:	one of the BBP_R47_F_* flags
485  *
486  * Convenience helper for reading values through BBP R47/R49 pair.
487  * Takes old value of BBP R47 as @reg, because callers usually have it
488  * cached already.
489  *
490  * Return: value of BBP R49.
491  */
492 static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag)
493 {
494 	flag |= reg & ~BBP_R47_FLAG;
495 	mt7601u_bbp_wr(dev, 47, flag);
496 	usleep_range(500, 700);
497 	return mt7601u_bbp_rr(dev, 49);
498 }
499 
500 static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev)
501 {
502 	u8 bbp_val, temp;
503 	u32 rf_bp, rf_set;
504 	int i;
505 
506 	rf_set = mt7601u_rr(dev, MT_RF_SETTING_0);
507 	rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0);
508 
509 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
510 	mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010);
511 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010);
512 
513 	bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10);
514 
515 	mt7601u_bbp_wr(dev, 22, 0x40);
516 
517 	for (i = 100; i && (bbp_val & 0x10); i--)
518 		bbp_val = mt7601u_bbp_rr(dev, 47);
519 
520 	temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP);
521 
522 	mt7601u_bbp_wr(dev, 22, 0);
523 
524 	bbp_val = mt7601u_bbp_rr(dev, 21);
525 	bbp_val |= 0x02;
526 	mt7601u_bbp_wr(dev, 21, bbp_val);
527 	bbp_val &= ~0x02;
528 	mt7601u_bbp_wr(dev, 21, bbp_val);
529 
530 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
531 	mt7601u_wr(dev, MT_RF_SETTING_0, rf_set);
532 	mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp);
533 
534 	trace_read_temp(dev, temp);
535 	return temp;
536 }
537 
538 static s8 mt7601u_read_temp(struct mt7601u_dev *dev)
539 {
540 	int i;
541 	u8 val;
542 	s8 temp;
543 
544 	val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10);
545 
546 	/* Note: this rarely succeeds, temp can change even if it fails. */
547 	for (i = 100; i && (val & 0x10); i--)
548 		val = mt7601u_bbp_rr(dev, 47);
549 
550 	temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP);
551 
552 	trace_read_temp(dev, temp);
553 	return temp;
554 }
555 
556 static void mt7601u_rxdc_cal(struct mt7601u_dev *dev)
557 {
558 	static const struct mt76_reg_pair intro[] = {
559 		{ 158, 0x8d }, { 159, 0xfc },
560 		{ 158, 0x8c }, { 159, 0x4c },
561 	}, outro[] = {
562 		{ 158, 0x8d }, { 159, 0xe0 },
563 	};
564 	u32 mac_ctrl;
565 	int i, ret;
566 
567 	mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
568 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX);
569 
570 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
571 				      intro, ARRAY_SIZE(intro));
572 	if (ret)
573 		dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret);
574 
575 	for (i = 20; i; i--) {
576 		usleep_range(300, 500);
577 
578 		mt7601u_bbp_wr(dev, 158, 0x8c);
579 		if (mt7601u_bbp_rr(dev, 159) == 0x0c)
580 			break;
581 	}
582 	if (!i)
583 		dev_err(dev->dev, "%s timed out\n", __func__);
584 
585 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
586 
587 	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
588 				      outro, ARRAY_SIZE(outro));
589 	if (ret)
590 		dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret);
591 
592 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
593 }
594 
595 void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev)
596 {
597 	mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp);
598 
599 	mt7601u_rxdc_cal(dev);
600 }
601 
602 /* Note: function copied from vendor driver */
603 static s16 lin2dBd(u16 linear)
604 {
605 	short exp = 0;
606 	unsigned int mantisa;
607 	int app, dBd;
608 
609 	if (WARN_ON(!linear))
610 		return -10000;
611 
612 	mantisa = linear;
613 
614 	exp = fls(mantisa) - 16;
615 	if (exp > 0)
616 		mantisa >>= exp;
617 	else
618 		mantisa <<= abs(exp);
619 
620 	if (mantisa <= 0xb800)
621 		app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600);
622 	else
623 		app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00);
624 	if (app < 0)
625 		app = 0;
626 
627 	dBd = ((15 + exp) << 15) + app;
628 	dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7);
629 	dBd = (dBd >> 10);
630 
631 	return dBd;
632 }
633 
634 static void
635 mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db)
636 {
637 	struct tssi_data *d = &dev->ee->tssi_data;
638 	int init_offset;
639 
640 	init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10;
641 
642 	mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
643 		 int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP);
644 }
645 
646 static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev)
647 {
648 	u8 rf_vga, rf_mixer, bbp_r47;
649 	int i, j;
650 	s8 res[4];
651 	s16 tssi_init_db, tssi_init_hvga_db;
652 
653 	mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030);
654 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030);
655 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
656 
657 	mt7601u_bbp_wr(dev, 58, 0);
658 	mt7601u_bbp_wr(dev, 241, 0x2);
659 	mt7601u_bbp_wr(dev, 23, 0x8);
660 	bbp_r47 = mt7601u_bbp_rr(dev, 47);
661 
662 	/* Set VGA gain */
663 	rf_vga = mt7601u_rf_rr(dev, 5, 3);
664 	mt7601u_rf_wr(dev, 5, 3, 8);
665 
666 	/* Mixer disable */
667 	rf_mixer = mt7601u_rf_rr(dev, 4, 39);
668 	mt7601u_rf_wr(dev, 4, 39, 0);
669 
670 	for (i = 0; i < 4; i++) {
671 		mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0);
672 
673 		mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02);
674 		mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11);
675 
676 		/* BBP TSSI initial and soft reset */
677 		mt7601u_bbp_wr(dev, 22, 0);
678 		mt7601u_bbp_wr(dev, 244, 0);
679 
680 		mt7601u_bbp_wr(dev, 21, 1);
681 		udelay(1);
682 		mt7601u_bbp_wr(dev, 21, 0);
683 
684 		/* TSSI measurement */
685 		mt7601u_bbp_wr(dev, 47, 0x50);
686 		mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40);
687 
688 		for (j = 20; j; j--)
689 			if (!(mt7601u_bbp_rr(dev, 47) & 0x10))
690 				break;
691 		if (!j)
692 			dev_err(dev->dev, "%s timed out\n", __func__);
693 
694 		/* TSSI read */
695 		mt7601u_bbp_wr(dev, 47, 0x40);
696 		res[i] = mt7601u_bbp_rr(dev, 49);
697 	}
698 
699 	tssi_init_db = lin2dBd((short)res[1] - res[0]);
700 	tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4);
701 	dev->tssi_init = res[0];
702 	dev->tssi_init_hvga = res[2];
703 	dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db;
704 
705 	dev_dbg(dev->dev,
706 		"TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n",
707 		dev->tssi_init, tssi_init_db, dev->tssi_init_hvga,
708 		tssi_init_hvga_db, dev->tssi_init_hvga_offset_db);
709 
710 	mt7601u_bbp_wr(dev, 22, 0);
711 	mt7601u_bbp_wr(dev, 244, 0);
712 
713 	mt7601u_bbp_wr(dev, 21, 1);
714 	udelay(1);
715 	mt7601u_bbp_wr(dev, 21, 0);
716 
717 	mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
718 	mt7601u_wr(dev, MT_RF_SETTING_0, 0);
719 
720 	mt7601u_rf_wr(dev, 5, 3, rf_vga);
721 	mt7601u_rf_wr(dev, 4, 39, rf_mixer);
722 	mt7601u_bbp_wr(dev, 47, bbp_r47);
723 
724 	mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db);
725 }
726 
727 static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on)
728 {
729 	int ret, temp, hi_temp = 400, lo_temp = -200;
730 
731 	temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE;
732 	dev->curr_temp = temp;
733 
734 	/* DPD Calibration */
735 	if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) {
736 		dev->dpd_temp = temp;
737 
738 		ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
739 		if (ret)
740 			return ret;
741 
742 		mt7601u_vco_cal(dev);
743 
744 		dev_dbg(dev->dev, "Recalibrate DPD\n");
745 	}
746 
747 	/* PLL Lock Protect */
748 	if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */
749 		dev->pll_lock_protect =  true;
750 
751 		mt7601u_rf_wr(dev, 4, 4, 6);
752 		mt7601u_rf_clear(dev, 4, 10, 0x30);
753 
754 		dev_dbg(dev->dev, "PLL lock protect on - too cold\n");
755 	} else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */
756 		dev->pll_lock_protect = false;
757 
758 		mt7601u_rf_wr(dev, 4, 4, 0);
759 		mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10);
760 
761 		dev_dbg(dev->dev, "PLL lock protect off\n");
762 	}
763 
764 	if (on) {
765 		hi_temp -= 50;
766 		lo_temp -= 50;
767 	}
768 
769 	/* BBP CR for H, L, N temperature */
770 	if (temp > hi_temp)
771 		return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high");
772 	else if (temp > lo_temp)
773 		return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal");
774 	else
775 		return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low");
776 }
777 
778 /* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */
779 static int mt7601u_current_tx_power(struct mt7601u_dev *dev)
780 {
781 	return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1];
782 }
783 
784 static bool mt7601u_use_hvga(struct mt7601u_dev *dev)
785 {
786 	return !(mt7601u_current_tx_power(dev) > 20);
787 }
788 
789 static s16
790 mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate)
791 {
792 	static const s16 decode_tb[] = { 0, 8847, -5734, -5734 };
793 	u32 reg;
794 
795 	switch (phy_mode) {
796 	case MT_PHY_TYPE_OFDM:
797 		tx_rate += 4;
798 	case MT_PHY_TYPE_CCK:
799 		reg = dev->rf_pa_mode[0];
800 		break;
801 	default:
802 		reg = dev->rf_pa_mode[1];
803 		break;
804 	}
805 
806 	return decode_tb[(reg >> (tx_rate * 2)) & 0x3];
807 }
808 
809 static struct mt7601u_tssi_params
810 mt7601u_tssi_params_get(struct mt7601u_dev *dev)
811 {
812 	static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 };
813 	static const int static_power[4] = { 0, -49152, -98304, 49152 };
814 	struct mt7601u_tssi_params p;
815 	u8 bbp_r47, pkt_type, tx_rate;
816 	struct power_per_rate *rate_table;
817 
818 	bbp_r47 = mt7601u_bbp_rr(dev, 47);
819 
820 	p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI);
821 	dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP);
822 	pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T);
823 
824 	p.trgt_power = mt7601u_current_tx_power(dev);
825 
826 	switch (pkt_type & 0x03) {
827 	case MT_PHY_TYPE_CCK:
828 		tx_rate = (pkt_type >> 4) & 0x03;
829 		rate_table = dev->ee->power_rate_table.cck;
830 		break;
831 
832 	case MT_PHY_TYPE_OFDM:
833 		tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07];
834 		rate_table = dev->ee->power_rate_table.ofdm;
835 		break;
836 
837 	default:
838 		tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE);
839 		tx_rate &= 0x7f;
840 		rate_table = dev->ee->power_rate_table.ht;
841 		break;
842 	}
843 
844 	if (dev->bw == MT_BW_20)
845 		p.trgt_power += rate_table[tx_rate / 2].bw20;
846 	else
847 		p.trgt_power += rate_table[tx_rate / 2].bw40;
848 
849 	p.trgt_power <<= 12;
850 
851 	dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power);
852 
853 	p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03,
854 						   tx_rate);
855 
856 	/* Channel 14, cck, bw20 */
857 	if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) {
858 		if (mt7601u_bbp_rr(dev, 4) & 0x20)
859 			p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830;
860 		else
861 			p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576;
862 	}
863 
864 	p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03];
865 
866 	p.trgt_power += dev->ee->tssi_data.tx0_delta_offset;
867 
868 	dev_dbg(dev->dev,
869 		"tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n",
870 		p.tssi0, p.trgt_power, dev->raw_temp, pkt_type);
871 
872 	return p;
873 }
874 
875 static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev)
876 {
877 	return !(mt7601u_bbp_rr(dev, 47) & 0x10);
878 }
879 
880 static int mt7601u_tssi_cal(struct mt7601u_dev *dev)
881 {
882 	struct mt7601u_tssi_params params;
883 	int curr_pwr, diff_pwr;
884 	char tssi_offset;
885 	s8 tssi_init;
886 	s16 tssi_m_dc, tssi_db;
887 	bool hvga;
888 	u32 val;
889 
890 	if (!dev->ee->tssi_enabled)
891 		return 0;
892 
893 	hvga = mt7601u_use_hvga(dev);
894 	if (!dev->tssi_read_trig)
895 		return mt7601u_mcu_tssi_read_kick(dev, hvga);
896 
897 	if (!mt7601u_tssi_read_ready(dev))
898 		return 0;
899 
900 	params = mt7601u_tssi_params_get(dev);
901 
902 	tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init);
903 	tssi_m_dc = params.tssi0 - tssi_init;
904 	tssi_db = lin2dBd(tssi_m_dc);
905 	dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n",
906 		tssi_m_dc, tssi_db, hvga);
907 
908 	if (dev->chandef.chan->hw_value < 5)
909 		tssi_offset = dev->ee->tssi_data.offset[0];
910 	else if (dev->chandef.chan->hw_value < 9)
911 		tssi_offset = dev->ee->tssi_data.offset[1];
912 	else
913 		tssi_offset = dev->ee->tssi_data.offset[2];
914 
915 	if (hvga)
916 		tssi_db -= dev->tssi_init_hvga_offset_db;
917 
918 	curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9);
919 	diff_pwr = params.trgt_power - curr_pwr;
920 	dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr);
921 
922 	if (params.tssi0 > 126 && diff_pwr > 0) {
923 		dev_err(dev->dev, "Error: TSSI upper saturation\n");
924 		diff_pwr = 0;
925 	}
926 	if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) {
927 		dev_err(dev->dev, "Error: TSSI lower saturation\n");
928 		diff_pwr = 0;
929 	}
930 
931 	if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 &&
932 	    (abs(diff_pwr) > abs(dev->prev_pwr_diff) ||
933 	     (diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff)))
934 		diff_pwr = 0;
935 	else
936 		dev->prev_pwr_diff = diff_pwr;
937 
938 	diff_pwr += (diff_pwr > 0) ? 2048 : -2048;
939 	diff_pwr /= 4096;
940 
941 	dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr);
942 
943 	val = mt7601u_rr(dev, MT_TX_ALC_CFG_1);
944 	curr_pwr = s6_to_int(FIELD_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val));
945 	diff_pwr += curr_pwr;
946 	val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr);
947 	mt7601u_wr(dev, MT_TX_ALC_CFG_1, val);
948 
949 	return mt7601u_mcu_tssi_read_kick(dev, hvga);
950 }
951 
952 static u8 mt7601u_agc_default(struct mt7601u_dev *dev)
953 {
954 	return (dev->ee->lna_gain - 8) * 2 + 0x34;
955 }
956 
957 static void mt7601u_agc_reset(struct mt7601u_dev *dev)
958 {
959 	u8 agc = mt7601u_agc_default(dev);
960 
961 	mt7601u_bbp_wr(dev, 66,	agc);
962 }
963 
964 void mt7601u_agc_save(struct mt7601u_dev *dev)
965 {
966 	dev->agc_save = mt7601u_bbp_rr(dev, 66);
967 }
968 
969 void mt7601u_agc_restore(struct mt7601u_dev *dev)
970 {
971 	mt7601u_bbp_wr(dev, 66, dev->agc_save);
972 }
973 
974 static void mt7601u_agc_tune(struct mt7601u_dev *dev)
975 {
976 	u8 val = mt7601u_agc_default(dev);
977 
978 	if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
979 		return;
980 
981 	/* Note: only in STA mode and not dozing; perhaps do this only if
982 	 *	 there is enough rssi updates since last run?
983 	 *	 Rssi updates are only on beacons and U2M so should work...
984 	 */
985 	spin_lock_bh(&dev->con_mon_lock);
986 	if (dev->avg_rssi <= -70)
987 		val -= 0x20;
988 	else if (dev->avg_rssi <= -60)
989 		val -= 0x10;
990 	spin_unlock_bh(&dev->con_mon_lock);
991 
992 	if (val != mt7601u_bbp_rr(dev, 66))
993 		mt7601u_bbp_wr(dev, 66, val);
994 
995 	/* TODO: also if lost a lot of beacons try resetting
996 	 *       (see RTMPSetAGCInitValue() call in mlme.c).
997 	 */
998 }
999 
1000 static void mt7601u_phy_calibrate(struct work_struct *work)
1001 {
1002 	struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
1003 					    cal_work.work);
1004 
1005 	mt7601u_agc_tune(dev);
1006 	mt7601u_tssi_cal(dev);
1007 	/* If TSSI calibration was run it already updated temperature. */
1008 	if (!dev->ee->tssi_enabled)
1009 		dev->raw_temp = mt7601u_read_temp(dev);
1010 	mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */
1011 
1012 	ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
1013 				     MT_CALIBRATE_INTERVAL);
1014 }
1015 
1016 static unsigned long
1017 __mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode)
1018 {
1019 	u8 activate_threshold, deactivate_threshold;
1020 
1021 	trace_freq_cal_offset(dev, phy_mode, last_offset);
1022 
1023 	/* No beacons received - reschedule soon */
1024 	if (last_offset == MT_FREQ_OFFSET_INVALID)
1025 		return MT_FREQ_CAL_ADJ_INTERVAL;
1026 
1027 	switch (phy_mode) {
1028 	case MT_PHY_TYPE_CCK:
1029 		activate_threshold = 19;
1030 		deactivate_threshold = 5;
1031 		break;
1032 	case MT_PHY_TYPE_OFDM:
1033 		activate_threshold = 102;
1034 		deactivate_threshold = 32;
1035 		break;
1036 	case MT_PHY_TYPE_HT:
1037 	case MT_PHY_TYPE_HT_GF:
1038 		activate_threshold = 82;
1039 		deactivate_threshold = 20;
1040 		break;
1041 	default:
1042 		WARN_ON(1);
1043 		return MT_FREQ_CAL_CHECK_INTERVAL;
1044 	}
1045 
1046 	if (abs(last_offset) >= activate_threshold)
1047 		dev->freq_cal.adjusting = true;
1048 	else if (abs(last_offset) <= deactivate_threshold)
1049 		dev->freq_cal.adjusting = false;
1050 
1051 	if (!dev->freq_cal.adjusting)
1052 		return MT_FREQ_CAL_CHECK_INTERVAL;
1053 
1054 	if (last_offset > deactivate_threshold) {
1055 		if (dev->freq_cal.freq > 0)
1056 			dev->freq_cal.freq--;
1057 		else
1058 			dev->freq_cal.adjusting = false;
1059 	} else if (last_offset < -deactivate_threshold) {
1060 		if (dev->freq_cal.freq < 0xbf)
1061 			dev->freq_cal.freq++;
1062 		else
1063 			dev->freq_cal.adjusting = false;
1064 	}
1065 
1066 	trace_freq_cal_adjust(dev, dev->freq_cal.freq);
1067 	mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq);
1068 	mt7601u_vco_cal(dev);
1069 
1070 	return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL :
1071 					 MT_FREQ_CAL_CHECK_INTERVAL;
1072 }
1073 
1074 static void mt7601u_phy_freq_cal(struct work_struct *work)
1075 {
1076 	struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
1077 					       freq_cal.work.work);
1078 	s8 last_offset;
1079 	u8 phy_mode;
1080 	unsigned long delay;
1081 
1082 	spin_lock_bh(&dev->con_mon_lock);
1083 	last_offset = dev->bcn_freq_off;
1084 	phy_mode = dev->bcn_phy_mode;
1085 	spin_unlock_bh(&dev->con_mon_lock);
1086 
1087 	delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode);
1088 	ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay);
1089 
1090 	spin_lock_bh(&dev->con_mon_lock);
1091 	dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
1092 	spin_unlock_bh(&dev->con_mon_lock);
1093 }
1094 
1095 void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev,
1096 			       struct ieee80211_bss_conf *info)
1097 {
1098 	if (!info->assoc)
1099 		cancel_delayed_work_sync(&dev->freq_cal.work);
1100 
1101 	/* Start/stop collecting beacon data */
1102 	spin_lock_bh(&dev->con_mon_lock);
1103 	ether_addr_copy(dev->ap_bssid, info->bssid);
1104 	dev->avg_rssi = 0;
1105 	dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
1106 	spin_unlock_bh(&dev->con_mon_lock);
1107 
1108 	dev->freq_cal.freq = dev->ee->rf_freq_off;
1109 	dev->freq_cal.enabled = info->assoc;
1110 	dev->freq_cal.adjusting = false;
1111 
1112 	if (info->assoc)
1113 		ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
1114 					     MT_FREQ_CAL_INIT_DELAY);
1115 }
1116 
1117 static int mt7601u_init_cal(struct mt7601u_dev *dev)
1118 {
1119 	u32 mac_ctrl;
1120 	int ret;
1121 
1122 	dev->raw_temp = mt7601u_read_bootup_temp(dev);
1123 	dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) *
1124 		MT_EE_TEMPERATURE_SLOPE;
1125 	dev->dpd_temp = dev->curr_temp;
1126 
1127 	mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
1128 
1129 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0);
1130 	if (ret)
1131 		return ret;
1132 
1133 	ret = mt7601u_rf_rr(dev, 0, 4);
1134 	if (ret < 0)
1135 		return ret;
1136 	ret |= 0x80;
1137 	ret = mt7601u_rf_wr(dev, 0, 4, ret);
1138 	if (ret)
1139 		return ret;
1140 	msleep(2);
1141 
1142 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0);
1143 	if (ret)
1144 		return ret;
1145 
1146 	mt7601u_rxdc_cal(dev);
1147 
1148 	ret = mt7601u_set_bw_filter(dev, true);
1149 	if (ret)
1150 		return ret;
1151 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0);
1152 	if (ret)
1153 		return ret;
1154 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0);
1155 	if (ret)
1156 		return ret;
1157 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0);
1158 	if (ret)
1159 		return ret;
1160 	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
1161 	if (ret)
1162 		return ret;
1163 
1164 	mt7601u_rxdc_cal(dev);
1165 
1166 	mt7601u_tssi_dc_gain_cal(dev);
1167 
1168 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
1169 
1170 	mt7601u_temp_comp(dev, true);
1171 
1172 	return 0;
1173 }
1174 
1175 int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw)
1176 {
1177 	u32 val, old;
1178 
1179 	if (bw == dev->bw) {
1180 		/* Vendor driver does the rmc even when no change is needed. */
1181 		mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
1182 
1183 		return 0;
1184 	}
1185 	dev->bw = bw;
1186 
1187 	/* Stop MAC for the time of bw change */
1188 	old = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
1189 	val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX);
1190 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, val);
1191 	mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX,
1192 		  0, 500000);
1193 
1194 	mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
1195 
1196 	mt7601u_wr(dev, MT_MAC_SYS_CTRL, old);
1197 
1198 	return mt7601u_load_bbp_temp_table_bw(dev);
1199 }
1200 
1201 /**
1202  * mt7601u_set_rx_path - set rx path in BBP
1203  * @dev:	pointer to adapter structure
1204  * @path:	rx path to set values are 0-based
1205  */
1206 void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path)
1207 {
1208 	mt7601u_bbp_rmw(dev, 3, 0x18, path << 3);
1209 }
1210 
1211 /**
1212  * mt7601u_set_tx_dac - set which tx DAC to use
1213  * @dev:	pointer to adapter structure
1214  * @path:	DAC index, values are 0-based
1215  */
1216 void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac)
1217 {
1218 	mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3);
1219 }
1220 
1221 int mt7601u_phy_init(struct mt7601u_dev *dev)
1222 {
1223 	int ret;
1224 
1225 	dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0);
1226 	dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1);
1227 
1228 	ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off);
1229 	if (ret)
1230 		return ret;
1231 	ret = mt7601u_write_reg_pairs(dev, 0, rf_central,
1232 				      ARRAY_SIZE(rf_central));
1233 	if (ret)
1234 		return ret;
1235 	ret = mt7601u_write_reg_pairs(dev, 0, rf_channel,
1236 				      ARRAY_SIZE(rf_channel));
1237 	if (ret)
1238 		return ret;
1239 	ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga));
1240 	if (ret)
1241 		return ret;
1242 
1243 	ret = mt7601u_init_cal(dev);
1244 	if (ret)
1245 		return ret;
1246 
1247 	dev->prev_pwr_diff = 100;
1248 
1249 	INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate);
1250 	INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal);
1251 
1252 	return 0;
1253 }
1254