1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * (c) Copyright 2002-2010, Ralink Technology, Inc. 4 * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org> 5 * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl> 6 */ 7 8 #include "mt7601u.h" 9 #include "mcu.h" 10 #include "eeprom.h" 11 #include "trace.h" 12 #include "initvals_phy.h" 13 14 #include <linux/etherdevice.h> 15 16 static void mt7601u_agc_reset(struct mt7601u_dev *dev); 17 18 static int 19 mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value) 20 { 21 int ret = 0; 22 23 if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || 24 WARN_ON(offset > 63)) 25 return -EINVAL; 26 if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) 27 return 0; 28 29 mutex_lock(&dev->reg_atomic_mutex); 30 31 if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) { 32 ret = -ETIMEDOUT; 33 goto out; 34 } 35 36 mt7601u_wr(dev, MT_RF_CSR_CFG, 37 FIELD_PREP(MT_RF_CSR_CFG_DATA, value) | 38 FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | 39 FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) | 40 MT_RF_CSR_CFG_WR | 41 MT_RF_CSR_CFG_KICK); 42 trace_rf_write(dev, bank, offset, value); 43 out: 44 mutex_unlock(&dev->reg_atomic_mutex); 45 46 if (ret < 0) 47 dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n", 48 bank, offset, ret); 49 50 return ret; 51 } 52 53 static int 54 mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset) 55 { 56 int ret = -ETIMEDOUT; 57 u32 val; 58 59 if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || 60 WARN_ON(offset > 63)) 61 return -EINVAL; 62 if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) 63 return 0xff; 64 65 mutex_lock(&dev->reg_atomic_mutex); 66 67 if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) 68 goto out; 69 70 mt7601u_wr(dev, MT_RF_CSR_CFG, 71 FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | 72 FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) | 73 MT_RF_CSR_CFG_KICK); 74 75 if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) 76 goto out; 77 78 val = mt7601u_rr(dev, MT_RF_CSR_CFG); 79 if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == offset && 80 FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) { 81 ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val); 82 trace_rf_read(dev, bank, offset, ret); 83 } 84 out: 85 mutex_unlock(&dev->reg_atomic_mutex); 86 87 if (ret < 0) 88 dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n", 89 bank, offset, ret); 90 91 return ret; 92 } 93 94 static int 95 mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val) 96 { 97 int ret; 98 99 ret = mt7601u_rf_rr(dev, bank, offset); 100 if (ret < 0) 101 return ret; 102 val |= ret & ~mask; 103 ret = mt7601u_rf_wr(dev, bank, offset, val); 104 if (ret) 105 return ret; 106 107 return val; 108 } 109 110 static int 111 mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val) 112 { 113 return mt7601u_rf_rmw(dev, bank, offset, 0, val); 114 } 115 116 static int 117 mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask) 118 { 119 return mt7601u_rf_rmw(dev, bank, offset, mask, 0); 120 } 121 122 static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val) 123 { 124 if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || 125 test_bit(MT7601U_STATE_REMOVED, &dev->state)) 126 return; 127 128 mutex_lock(&dev->reg_atomic_mutex); 129 130 if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) { 131 dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset); 132 goto out; 133 } 134 135 mt7601u_wr(dev, MT_BBP_CSR_CFG, 136 FIELD_PREP(MT_BBP_CSR_CFG_VAL, val) | 137 FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) | 138 MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY); 139 trace_bbp_write(dev, offset, val); 140 out: 141 mutex_unlock(&dev->reg_atomic_mutex); 142 } 143 144 static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset) 145 { 146 u32 val; 147 int ret = -ETIMEDOUT; 148 149 if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state))) 150 return -EINVAL; 151 if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) 152 return 0xff; 153 154 mutex_lock(&dev->reg_atomic_mutex); 155 156 if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) 157 goto out; 158 159 mt7601u_wr(dev, MT_BBP_CSR_CFG, 160 FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) | 161 MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY | 162 MT_BBP_CSR_CFG_READ); 163 164 if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) 165 goto out; 166 167 val = mt7601u_rr(dev, MT_BBP_CSR_CFG); 168 if (FIELD_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) { 169 ret = FIELD_GET(MT_BBP_CSR_CFG_VAL, val); 170 trace_bbp_read(dev, offset, ret); 171 } 172 out: 173 mutex_unlock(&dev->reg_atomic_mutex); 174 175 if (ret < 0) 176 dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n", 177 offset, ret); 178 179 return ret; 180 } 181 182 static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) 183 { 184 int ret; 185 186 ret = mt7601u_bbp_rr(dev, offset); 187 if (ret < 0) 188 return ret; 189 val |= ret & ~mask; 190 mt7601u_bbp_wr(dev, offset, val); 191 192 return val; 193 } 194 195 static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) 196 { 197 int ret; 198 199 ret = mt7601u_bbp_rr(dev, offset); 200 if (ret < 0) 201 return ret; 202 val |= ret & ~mask; 203 if (ret != val) 204 mt7601u_bbp_wr(dev, offset, val); 205 206 return val; 207 } 208 209 int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev) 210 { 211 int i = 20; 212 u8 val; 213 214 do { 215 val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION); 216 if (val && val != 0xff) 217 break; 218 } while (--i); 219 220 if (!i) { 221 dev_err(dev->dev, "Error: BBP is not ready\n"); 222 return -EIO; 223 } 224 225 return 0; 226 } 227 228 u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below) 229 { 230 return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0); 231 } 232 233 int mt7601u_phy_get_rssi(struct mt7601u_dev *dev, 234 struct mt7601u_rxwi *rxwi, u16 rate) 235 { 236 static const s8 lna[2][2][3] = { 237 /* main LNA */ { 238 /* bw20 */ { -2, 15, 33 }, 239 /* bw40 */ { 0, 16, 34 } 240 }, 241 /* aux LNA */ { 242 /* bw20 */ { -2, 15, 33 }, 243 /* bw40 */ { -2, 16, 34 } 244 } 245 }; 246 int bw = FIELD_GET(MT_RXWI_RATE_BW, rate); 247 int aux_lna = FIELD_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant); 248 int lna_id = FIELD_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain); 249 int val; 250 251 if (lna_id) /* LNA id can be 0, 2, 3. */ 252 lna_id--; 253 254 val = 8; 255 val -= lna[aux_lna][bw][lna_id]; 256 val -= FIELD_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain); 257 val -= dev->ee->lna_gain; 258 val -= dev->ee->rssi_offset[0]; 259 260 return val; 261 } 262 263 static void mt7601u_vco_cal(struct mt7601u_dev *dev) 264 { 265 mt7601u_rf_wr(dev, 0, 4, 0x0a); 266 mt7601u_rf_wr(dev, 0, 5, 0x20); 267 mt7601u_rf_set(dev, 0, 4, BIT(7)); 268 msleep(2); 269 } 270 271 static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal) 272 { 273 u32 filter = 0; 274 int ret; 275 276 if (!cal) 277 filter |= 0x10000; 278 if (dev->bw != MT_BW_20) 279 filter |= 0x00100; 280 281 /* TX */ 282 ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1); 283 if (ret) 284 return ret; 285 /* RX */ 286 return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter); 287 } 288 289 static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev) 290 { 291 const struct reg_table *t; 292 293 if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW)) 294 return -EINVAL; 295 296 t = &bbp_mode_table[dev->temp_mode][dev->bw]; 297 298 return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n); 299 } 300 301 static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name) 302 { 303 const struct reg_table *t; 304 int ret; 305 306 if (dev->temp_mode == mode) 307 return 0; 308 309 dev->temp_mode = mode; 310 trace_temp_mode(dev, mode); 311 312 t = bbp_mode_table[dev->temp_mode]; 313 ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, 314 t[2].regs, t[2].n); 315 if (ret) 316 return ret; 317 318 return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, 319 t[dev->bw].regs, t[dev->bw].n); 320 } 321 322 static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan) 323 { 324 struct mt7601u_rate_power *t = &dev->ee->power_rate_table; 325 326 if (hw_chan != 14 || dev->bw != MT_BW_20) { 327 mt7601u_bbp_rmw(dev, 4, 0x20, 0); 328 mt7601u_bbp_wr(dev, 178, 0xff); 329 330 t->cck[0].bw20 = dev->ee->real_cck_bw20[0]; 331 t->cck[1].bw20 = dev->ee->real_cck_bw20[1]; 332 } else { /* Apply CH14 OBW fixup */ 333 mt7601u_bbp_wr(dev, 4, 0x60); 334 mt7601u_bbp_wr(dev, 178, 0); 335 336 /* Note: vendor code is buggy here for negative values */ 337 t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2; 338 t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2; 339 } 340 } 341 342 static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev, 343 struct cfg80211_chan_def *chandef) 344 { 345 #define FREQ_PLAN_REGS 4 346 static const u8 freq_plan[14][FREQ_PLAN_REGS] = { 347 { 0x99, 0x99, 0x09, 0x50 }, 348 { 0x46, 0x44, 0x0a, 0x50 }, 349 { 0xec, 0xee, 0x0a, 0x50 }, 350 { 0x99, 0x99, 0x0b, 0x50 }, 351 { 0x46, 0x44, 0x08, 0x51 }, 352 { 0xec, 0xee, 0x08, 0x51 }, 353 { 0x99, 0x99, 0x09, 0x51 }, 354 { 0x46, 0x44, 0x0a, 0x51 }, 355 { 0xec, 0xee, 0x0a, 0x51 }, 356 { 0x99, 0x99, 0x0b, 0x51 }, 357 { 0x46, 0x44, 0x08, 0x52 }, 358 { 0xec, 0xee, 0x08, 0x52 }, 359 { 0x99, 0x99, 0x09, 0x52 }, 360 { 0x33, 0x33, 0x0b, 0x52 }, 361 }; 362 struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = { 363 { 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 }, 364 }; 365 struct mt76_reg_pair bbp_settings[3] = { 366 { 62, 0x37 - dev->ee->lna_gain }, 367 { 63, 0x37 - dev->ee->lna_gain }, 368 { 64, 0x37 - dev->ee->lna_gain }, 369 }; 370 371 struct ieee80211_channel *chan = chandef->chan; 372 enum nl80211_channel_type chan_type = 373 cfg80211_get_chandef_type(chandef); 374 struct mt7601u_rate_power *t = &dev->ee->power_rate_table; 375 int chan_idx; 376 bool chan_ext_below; 377 u8 bw; 378 int i, ret; 379 380 bw = MT_BW_20; 381 chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS); 382 chan_idx = chan->hw_value - 1; 383 384 if (chandef->width == NL80211_CHAN_WIDTH_40) { 385 bw = MT_BW_40; 386 387 if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS) 388 chan_idx -= 2; 389 else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS) 390 chan_idx += 2; 391 else 392 dev_err(dev->dev, "Error: invalid 40MHz channel!!\n"); 393 } 394 395 if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) { 396 dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n", 397 bw, chan_ext_below); 398 399 mt7601u_bbp_set_bw(dev, bw); 400 401 mt7601u_bbp_set_ctrlch(dev, chan_ext_below); 402 mt7601u_mac_set_ctrlch(dev, chan_ext_below); 403 dev->chan_ext_below = chan_ext_below; 404 } 405 406 for (i = 0; i < FREQ_PLAN_REGS; i++) 407 channel_freq_plan[i].value = freq_plan[chan_idx][i]; 408 409 ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF, 410 channel_freq_plan, FREQ_PLAN_REGS); 411 if (ret) 412 return ret; 413 414 mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f, 415 dev->ee->chan_pwr[chan_idx] & 0x3f); 416 417 ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, 418 bbp_settings, ARRAY_SIZE(bbp_settings)); 419 if (ret) 420 return ret; 421 422 mt7601u_vco_cal(dev); 423 mt7601u_bbp_set_bw(dev, bw); 424 ret = mt7601u_set_bw_filter(dev, false); 425 if (ret) 426 return ret; 427 428 mt7601u_apply_ch14_fixup(dev, chan->hw_value); 429 mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 | 430 int_to_s6(t->ofdm[0].bw20) << 16 | 431 int_to_s6(t->cck[1].bw20) << 8 | 432 int_to_s6(t->cck[0].bw20)); 433 434 if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) 435 mt7601u_agc_reset(dev); 436 437 dev->chandef = *chandef; 438 439 return 0; 440 } 441 442 int mt7601u_phy_set_channel(struct mt7601u_dev *dev, 443 struct cfg80211_chan_def *chandef) 444 { 445 int ret; 446 447 cancel_delayed_work_sync(&dev->cal_work); 448 cancel_delayed_work_sync(&dev->freq_cal.work); 449 450 mutex_lock(&dev->hw_atomic_mutex); 451 ret = __mt7601u_phy_set_channel(dev, chandef); 452 mutex_unlock(&dev->hw_atomic_mutex); 453 if (ret) 454 return ret; 455 456 if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) 457 return 0; 458 459 ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, 460 MT_CALIBRATE_INTERVAL); 461 if (dev->freq_cal.enabled) 462 ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, 463 MT_FREQ_CAL_INIT_DELAY); 464 return 0; 465 } 466 467 #define BBP_R47_FLAG GENMASK(2, 0) 468 #define BBP_R47_F_TSSI 0 469 #define BBP_R47_F_PKT_T 1 470 #define BBP_R47_F_TX_RATE 2 471 #define BBP_R47_F_TEMP 4 472 /** 473 * mt7601u_bbp_r47_get - read value through BBP R47/R49 pair 474 * @dev: pointer to adapter structure 475 * @reg: value of BBP R47 before the operation 476 * @flag: one of the BBP_R47_F_* flags 477 * 478 * Convenience helper for reading values through BBP R47/R49 pair. 479 * Takes old value of BBP R47 as @reg, because callers usually have it 480 * cached already. 481 * 482 * Return: value of BBP R49. 483 */ 484 static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag) 485 { 486 flag |= reg & ~BBP_R47_FLAG; 487 mt7601u_bbp_wr(dev, 47, flag); 488 usleep_range(500, 700); 489 return mt7601u_bbp_rr(dev, 49); 490 } 491 492 static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev) 493 { 494 u8 bbp_val, temp; 495 u32 rf_bp, rf_set; 496 int i; 497 498 rf_set = mt7601u_rr(dev, MT_RF_SETTING_0); 499 rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0); 500 501 mt7601u_wr(dev, MT_RF_BYPASS_0, 0); 502 mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010); 503 mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010); 504 505 bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10); 506 507 mt7601u_bbp_wr(dev, 22, 0x40); 508 509 for (i = 100; i && (bbp_val & 0x10); i--) 510 bbp_val = mt7601u_bbp_rr(dev, 47); 511 512 temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP); 513 514 mt7601u_bbp_wr(dev, 22, 0); 515 516 bbp_val = mt7601u_bbp_rr(dev, 21); 517 bbp_val |= 0x02; 518 mt7601u_bbp_wr(dev, 21, bbp_val); 519 bbp_val &= ~0x02; 520 mt7601u_bbp_wr(dev, 21, bbp_val); 521 522 mt7601u_wr(dev, MT_RF_BYPASS_0, 0); 523 mt7601u_wr(dev, MT_RF_SETTING_0, rf_set); 524 mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp); 525 526 trace_read_temp(dev, temp); 527 return temp; 528 } 529 530 static s8 mt7601u_read_temp(struct mt7601u_dev *dev) 531 { 532 int i; 533 u8 val; 534 s8 temp; 535 536 val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10); 537 538 /* Note: this rarely succeeds, temp can change even if it fails. */ 539 for (i = 100; i && (val & 0x10); i--) 540 val = mt7601u_bbp_rr(dev, 47); 541 542 temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP); 543 544 trace_read_temp(dev, temp); 545 return temp; 546 } 547 548 static void mt7601u_rxdc_cal(struct mt7601u_dev *dev) 549 { 550 static const struct mt76_reg_pair intro[] = { 551 { 158, 0x8d }, { 159, 0xfc }, 552 { 158, 0x8c }, { 159, 0x4c }, 553 }, outro[] = { 554 { 158, 0x8d }, { 159, 0xe0 }, 555 }; 556 u32 mac_ctrl; 557 int i, ret; 558 559 mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); 560 mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX); 561 562 ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, 563 intro, ARRAY_SIZE(intro)); 564 if (ret) 565 dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret); 566 567 for (i = 20; i; i--) { 568 usleep_range(300, 500); 569 570 mt7601u_bbp_wr(dev, 158, 0x8c); 571 if (mt7601u_bbp_rr(dev, 159) == 0x0c) 572 break; 573 } 574 if (!i) 575 dev_err(dev->dev, "%s timed out\n", __func__); 576 577 mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); 578 579 ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, 580 outro, ARRAY_SIZE(outro)); 581 if (ret) 582 dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret); 583 584 mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); 585 } 586 587 void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev) 588 { 589 if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) 590 return; 591 592 mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp); 593 594 mt7601u_rxdc_cal(dev); 595 } 596 597 /* Note: function copied from vendor driver */ 598 static s16 lin2dBd(u16 linear) 599 { 600 short exp = 0; 601 unsigned int mantisa; 602 int app, dBd; 603 604 if (WARN_ON(!linear)) 605 return -10000; 606 607 mantisa = linear; 608 609 exp = fls(mantisa) - 16; 610 if (exp > 0) 611 mantisa >>= exp; 612 else 613 mantisa <<= abs(exp); 614 615 if (mantisa <= 0xb800) 616 app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600); 617 else 618 app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00); 619 if (app < 0) 620 app = 0; 621 622 dBd = ((15 + exp) << 15) + app; 623 dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7); 624 dBd = (dBd >> 10); 625 626 return dBd; 627 } 628 629 static void 630 mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db) 631 { 632 struct tssi_data *d = &dev->ee->tssi_data; 633 int init_offset; 634 635 init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10; 636 637 mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP, 638 int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP); 639 } 640 641 static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev) 642 { 643 u8 rf_vga, rf_mixer, bbp_r47; 644 int i, j; 645 s8 res[4]; 646 s16 tssi_init_db, tssi_init_hvga_db; 647 648 mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030); 649 mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030); 650 mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); 651 652 mt7601u_bbp_wr(dev, 58, 0); 653 mt7601u_bbp_wr(dev, 241, 0x2); 654 mt7601u_bbp_wr(dev, 23, 0x8); 655 bbp_r47 = mt7601u_bbp_rr(dev, 47); 656 657 /* Set VGA gain */ 658 rf_vga = mt7601u_rf_rr(dev, 5, 3); 659 mt7601u_rf_wr(dev, 5, 3, 8); 660 661 /* Mixer disable */ 662 rf_mixer = mt7601u_rf_rr(dev, 4, 39); 663 mt7601u_rf_wr(dev, 4, 39, 0); 664 665 for (i = 0; i < 4; i++) { 666 mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0); 667 668 mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02); 669 mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11); 670 671 /* BBP TSSI initial and soft reset */ 672 mt7601u_bbp_wr(dev, 22, 0); 673 mt7601u_bbp_wr(dev, 244, 0); 674 675 mt7601u_bbp_wr(dev, 21, 1); 676 udelay(1); 677 mt7601u_bbp_wr(dev, 21, 0); 678 679 /* TSSI measurement */ 680 mt7601u_bbp_wr(dev, 47, 0x50); 681 mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40); 682 683 for (j = 20; j; j--) 684 if (!(mt7601u_bbp_rr(dev, 47) & 0x10)) 685 break; 686 if (!j) 687 dev_err(dev->dev, "%s timed out\n", __func__); 688 689 /* TSSI read */ 690 mt7601u_bbp_wr(dev, 47, 0x40); 691 res[i] = mt7601u_bbp_rr(dev, 49); 692 } 693 694 tssi_init_db = lin2dBd((short)res[1] - res[0]); 695 tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4); 696 dev->tssi_init = res[0]; 697 dev->tssi_init_hvga = res[2]; 698 dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db; 699 700 dev_dbg(dev->dev, 701 "TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n", 702 dev->tssi_init, tssi_init_db, dev->tssi_init_hvga, 703 tssi_init_hvga_db, dev->tssi_init_hvga_offset_db); 704 705 mt7601u_bbp_wr(dev, 22, 0); 706 mt7601u_bbp_wr(dev, 244, 0); 707 708 mt7601u_bbp_wr(dev, 21, 1); 709 udelay(1); 710 mt7601u_bbp_wr(dev, 21, 0); 711 712 mt7601u_wr(dev, MT_RF_BYPASS_0, 0); 713 mt7601u_wr(dev, MT_RF_SETTING_0, 0); 714 715 mt7601u_rf_wr(dev, 5, 3, rf_vga); 716 mt7601u_rf_wr(dev, 4, 39, rf_mixer); 717 mt7601u_bbp_wr(dev, 47, bbp_r47); 718 719 mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db); 720 } 721 722 static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on) 723 { 724 int ret, temp, hi_temp = 400, lo_temp = -200; 725 726 temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE; 727 dev->curr_temp = temp; 728 729 /* DPD Calibration */ 730 if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) { 731 dev->dpd_temp = temp; 732 733 ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); 734 if (ret) 735 return ret; 736 737 mt7601u_vco_cal(dev); 738 739 dev_dbg(dev->dev, "Recalibrate DPD\n"); 740 } 741 742 /* PLL Lock Protect */ 743 if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */ 744 dev->pll_lock_protect = true; 745 746 mt7601u_rf_wr(dev, 4, 4, 6); 747 mt7601u_rf_clear(dev, 4, 10, 0x30); 748 749 dev_dbg(dev->dev, "PLL lock protect on - too cold\n"); 750 } else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */ 751 dev->pll_lock_protect = false; 752 753 mt7601u_rf_wr(dev, 4, 4, 0); 754 mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10); 755 756 dev_dbg(dev->dev, "PLL lock protect off\n"); 757 } 758 759 if (on) { 760 hi_temp -= 50; 761 lo_temp -= 50; 762 } 763 764 /* BBP CR for H, L, N temperature */ 765 if (temp > hi_temp) 766 return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high"); 767 else if (temp > lo_temp) 768 return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal"); 769 else 770 return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low"); 771 } 772 773 /* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */ 774 static int mt7601u_current_tx_power(struct mt7601u_dev *dev) 775 { 776 return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1]; 777 } 778 779 static bool mt7601u_use_hvga(struct mt7601u_dev *dev) 780 { 781 return !(mt7601u_current_tx_power(dev) > 20); 782 } 783 784 static s16 785 mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate) 786 { 787 static const s16 decode_tb[] = { 0, 8847, -5734, -5734 }; 788 u32 reg; 789 790 switch (phy_mode) { 791 case MT_PHY_TYPE_OFDM: 792 tx_rate += 4; 793 fallthrough; 794 case MT_PHY_TYPE_CCK: 795 reg = dev->rf_pa_mode[0]; 796 break; 797 default: 798 reg = dev->rf_pa_mode[1]; 799 break; 800 } 801 802 return decode_tb[(reg >> (tx_rate * 2)) & 0x3]; 803 } 804 805 static struct mt7601u_tssi_params 806 mt7601u_tssi_params_get(struct mt7601u_dev *dev) 807 { 808 static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 }; 809 static const int static_power[4] = { 0, -49152, -98304, 49152 }; 810 struct mt7601u_tssi_params p; 811 u8 bbp_r47, pkt_type, tx_rate; 812 struct power_per_rate *rate_table; 813 814 bbp_r47 = mt7601u_bbp_rr(dev, 47); 815 816 p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI); 817 dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP); 818 pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T); 819 820 p.trgt_power = mt7601u_current_tx_power(dev); 821 822 switch (pkt_type & 0x03) { 823 case MT_PHY_TYPE_CCK: 824 tx_rate = (pkt_type >> 4) & 0x03; 825 rate_table = dev->ee->power_rate_table.cck; 826 break; 827 828 case MT_PHY_TYPE_OFDM: 829 tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07]; 830 rate_table = dev->ee->power_rate_table.ofdm; 831 break; 832 833 default: 834 tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE); 835 tx_rate &= 0x7f; 836 rate_table = dev->ee->power_rate_table.ht; 837 break; 838 } 839 840 if (dev->bw == MT_BW_20) 841 p.trgt_power += rate_table[tx_rate / 2].bw20; 842 else 843 p.trgt_power += rate_table[tx_rate / 2].bw40; 844 845 p.trgt_power <<= 12; 846 847 dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power); 848 849 p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03, 850 tx_rate); 851 852 /* Channel 14, cck, bw20 */ 853 if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) { 854 if (mt7601u_bbp_rr(dev, 4) & 0x20) 855 p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830; 856 else 857 p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576; 858 } 859 860 p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03]; 861 862 p.trgt_power += dev->ee->tssi_data.tx0_delta_offset; 863 864 dev_dbg(dev->dev, 865 "tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n", 866 p.tssi0, p.trgt_power, dev->raw_temp, pkt_type); 867 868 return p; 869 } 870 871 static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev) 872 { 873 return !(mt7601u_bbp_rr(dev, 47) & 0x10); 874 } 875 876 static int mt7601u_tssi_cal(struct mt7601u_dev *dev) 877 { 878 struct mt7601u_tssi_params params; 879 int curr_pwr, diff_pwr; 880 char tssi_offset; 881 s8 tssi_init; 882 s16 tssi_m_dc, tssi_db; 883 bool hvga; 884 u32 val; 885 886 if (!dev->ee->tssi_enabled) 887 return 0; 888 889 hvga = mt7601u_use_hvga(dev); 890 if (!dev->tssi_read_trig) 891 return mt7601u_mcu_tssi_read_kick(dev, hvga); 892 893 if (!mt7601u_tssi_read_ready(dev)) 894 return 0; 895 896 params = mt7601u_tssi_params_get(dev); 897 898 tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init); 899 tssi_m_dc = params.tssi0 - tssi_init; 900 tssi_db = lin2dBd(tssi_m_dc); 901 dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n", 902 tssi_m_dc, tssi_db, hvga); 903 904 if (dev->chandef.chan->hw_value < 5) 905 tssi_offset = dev->ee->tssi_data.offset[0]; 906 else if (dev->chandef.chan->hw_value < 9) 907 tssi_offset = dev->ee->tssi_data.offset[1]; 908 else 909 tssi_offset = dev->ee->tssi_data.offset[2]; 910 911 if (hvga) 912 tssi_db -= dev->tssi_init_hvga_offset_db; 913 914 curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9); 915 diff_pwr = params.trgt_power - curr_pwr; 916 dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr); 917 918 if (params.tssi0 > 126 && diff_pwr > 0) { 919 dev_err(dev->dev, "Error: TSSI upper saturation\n"); 920 diff_pwr = 0; 921 } 922 if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) { 923 dev_err(dev->dev, "Error: TSSI lower saturation\n"); 924 diff_pwr = 0; 925 } 926 927 if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 && 928 (abs(diff_pwr) > abs(dev->prev_pwr_diff) || 929 (diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff))) 930 diff_pwr = 0; 931 else 932 dev->prev_pwr_diff = diff_pwr; 933 934 diff_pwr += (diff_pwr > 0) ? 2048 : -2048; 935 diff_pwr /= 4096; 936 937 dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr); 938 939 val = mt7601u_rr(dev, MT_TX_ALC_CFG_1); 940 curr_pwr = s6_to_int(FIELD_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val)); 941 diff_pwr += curr_pwr; 942 val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr); 943 mt7601u_wr(dev, MT_TX_ALC_CFG_1, val); 944 945 return mt7601u_mcu_tssi_read_kick(dev, hvga); 946 } 947 948 static u8 mt7601u_agc_default(struct mt7601u_dev *dev) 949 { 950 return (dev->ee->lna_gain - 8) * 2 + 0x34; 951 } 952 953 static void mt7601u_agc_reset(struct mt7601u_dev *dev) 954 { 955 u8 agc = mt7601u_agc_default(dev); 956 957 mt7601u_bbp_wr(dev, 66, agc); 958 } 959 960 void mt7601u_agc_save(struct mt7601u_dev *dev) 961 { 962 dev->agc_save = mt7601u_bbp_rr(dev, 66); 963 } 964 965 void mt7601u_agc_restore(struct mt7601u_dev *dev) 966 { 967 mt7601u_bbp_wr(dev, 66, dev->agc_save); 968 } 969 970 static void mt7601u_agc_tune(struct mt7601u_dev *dev) 971 { 972 u8 val = mt7601u_agc_default(dev); 973 long avg_rssi; 974 975 if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) 976 return; 977 978 /* Note: only in STA mode and not dozing; perhaps do this only if 979 * there is enough rssi updates since last run? 980 * Rssi updates are only on beacons and U2M so should work... 981 */ 982 spin_lock_bh(&dev->con_mon_lock); 983 avg_rssi = ewma_rssi_read(&dev->avg_rssi); 984 spin_unlock_bh(&dev->con_mon_lock); 985 if (avg_rssi == 0) 986 return; 987 988 avg_rssi = -avg_rssi; 989 if (avg_rssi <= -70) 990 val -= 0x20; 991 else if (avg_rssi <= -60) 992 val -= 0x10; 993 994 if (val != mt7601u_bbp_rr(dev, 66)) 995 mt7601u_bbp_wr(dev, 66, val); 996 997 /* TODO: also if lost a lot of beacons try resetting 998 * (see RTMPSetAGCInitValue() call in mlme.c). 999 */ 1000 } 1001 1002 static void mt7601u_phy_calibrate(struct work_struct *work) 1003 { 1004 struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, 1005 cal_work.work); 1006 1007 mt7601u_agc_tune(dev); 1008 mt7601u_tssi_cal(dev); 1009 /* If TSSI calibration was run it already updated temperature. */ 1010 if (!dev->ee->tssi_enabled) 1011 dev->raw_temp = mt7601u_read_temp(dev); 1012 mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */ 1013 1014 ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, 1015 MT_CALIBRATE_INTERVAL); 1016 } 1017 1018 static unsigned long 1019 __mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode) 1020 { 1021 u8 activate_threshold, deactivate_threshold; 1022 1023 trace_freq_cal_offset(dev, phy_mode, last_offset); 1024 1025 /* No beacons received - reschedule soon */ 1026 if (last_offset == MT_FREQ_OFFSET_INVALID) 1027 return MT_FREQ_CAL_ADJ_INTERVAL; 1028 1029 switch (phy_mode) { 1030 case MT_PHY_TYPE_CCK: 1031 activate_threshold = 19; 1032 deactivate_threshold = 5; 1033 break; 1034 case MT_PHY_TYPE_OFDM: 1035 activate_threshold = 102; 1036 deactivate_threshold = 32; 1037 break; 1038 case MT_PHY_TYPE_HT: 1039 case MT_PHY_TYPE_HT_GF: 1040 activate_threshold = 82; 1041 deactivate_threshold = 20; 1042 break; 1043 default: 1044 WARN_ON(1); 1045 return MT_FREQ_CAL_CHECK_INTERVAL; 1046 } 1047 1048 if (abs(last_offset) >= activate_threshold) 1049 dev->freq_cal.adjusting = true; 1050 else if (abs(last_offset) <= deactivate_threshold) 1051 dev->freq_cal.adjusting = false; 1052 1053 if (!dev->freq_cal.adjusting) 1054 return MT_FREQ_CAL_CHECK_INTERVAL; 1055 1056 if (last_offset > deactivate_threshold) { 1057 if (dev->freq_cal.freq > 0) 1058 dev->freq_cal.freq--; 1059 else 1060 dev->freq_cal.adjusting = false; 1061 } else if (last_offset < -deactivate_threshold) { 1062 if (dev->freq_cal.freq < 0xbf) 1063 dev->freq_cal.freq++; 1064 else 1065 dev->freq_cal.adjusting = false; 1066 } 1067 1068 trace_freq_cal_adjust(dev, dev->freq_cal.freq); 1069 mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq); 1070 mt7601u_vco_cal(dev); 1071 1072 return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL : 1073 MT_FREQ_CAL_CHECK_INTERVAL; 1074 } 1075 1076 static void mt7601u_phy_freq_cal(struct work_struct *work) 1077 { 1078 struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, 1079 freq_cal.work.work); 1080 s8 last_offset; 1081 u8 phy_mode; 1082 unsigned long delay; 1083 1084 spin_lock_bh(&dev->con_mon_lock); 1085 last_offset = dev->bcn_freq_off; 1086 phy_mode = dev->bcn_phy_mode; 1087 spin_unlock_bh(&dev->con_mon_lock); 1088 1089 delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode); 1090 ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay); 1091 1092 spin_lock_bh(&dev->con_mon_lock); 1093 dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; 1094 spin_unlock_bh(&dev->con_mon_lock); 1095 } 1096 1097 void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev, 1098 struct ieee80211_bss_conf *info) 1099 { 1100 if (!info->assoc) 1101 cancel_delayed_work_sync(&dev->freq_cal.work); 1102 1103 /* Start/stop collecting beacon data */ 1104 spin_lock_bh(&dev->con_mon_lock); 1105 ether_addr_copy(dev->ap_bssid, info->bssid); 1106 ewma_rssi_init(&dev->avg_rssi); 1107 dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; 1108 spin_unlock_bh(&dev->con_mon_lock); 1109 1110 dev->freq_cal.freq = dev->ee->rf_freq_off; 1111 dev->freq_cal.enabled = info->assoc; 1112 dev->freq_cal.adjusting = false; 1113 1114 if (info->assoc) 1115 ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, 1116 MT_FREQ_CAL_INIT_DELAY); 1117 } 1118 1119 static int mt7601u_init_cal(struct mt7601u_dev *dev) 1120 { 1121 u32 mac_ctrl; 1122 int ret; 1123 1124 dev->raw_temp = mt7601u_read_bootup_temp(dev); 1125 dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) * 1126 MT_EE_TEMPERATURE_SLOPE; 1127 dev->dpd_temp = dev->curr_temp; 1128 1129 mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); 1130 1131 ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0); 1132 if (ret) 1133 return ret; 1134 1135 ret = mt7601u_rf_rr(dev, 0, 4); 1136 if (ret < 0) 1137 return ret; 1138 ret |= 0x80; 1139 ret = mt7601u_rf_wr(dev, 0, 4, ret); 1140 if (ret) 1141 return ret; 1142 msleep(2); 1143 1144 ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0); 1145 if (ret) 1146 return ret; 1147 1148 mt7601u_rxdc_cal(dev); 1149 1150 ret = mt7601u_set_bw_filter(dev, true); 1151 if (ret) 1152 return ret; 1153 ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0); 1154 if (ret) 1155 return ret; 1156 ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0); 1157 if (ret) 1158 return ret; 1159 ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0); 1160 if (ret) 1161 return ret; 1162 ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); 1163 if (ret) 1164 return ret; 1165 1166 mt7601u_rxdc_cal(dev); 1167 1168 mt7601u_tssi_dc_gain_cal(dev); 1169 1170 mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); 1171 1172 mt7601u_temp_comp(dev, true); 1173 1174 return 0; 1175 } 1176 1177 int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw) 1178 { 1179 u32 val, old; 1180 1181 if (bw == dev->bw) { 1182 /* Vendor driver does the rmc even when no change is needed. */ 1183 mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); 1184 1185 return 0; 1186 } 1187 dev->bw = bw; 1188 1189 /* Stop MAC for the time of bw change */ 1190 old = mt7601u_rr(dev, MT_MAC_SYS_CTRL); 1191 val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX); 1192 mt7601u_wr(dev, MT_MAC_SYS_CTRL, val); 1193 mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, 1194 0, 500000); 1195 1196 mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); 1197 1198 mt7601u_wr(dev, MT_MAC_SYS_CTRL, old); 1199 1200 return mt7601u_load_bbp_temp_table_bw(dev); 1201 } 1202 1203 /** 1204 * mt7601u_set_rx_path - set rx path in BBP 1205 * @dev: pointer to adapter structure 1206 * @path: rx path to set values are 0-based 1207 */ 1208 void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path) 1209 { 1210 mt7601u_bbp_rmw(dev, 3, 0x18, path << 3); 1211 } 1212 1213 /** 1214 * mt7601u_set_tx_dac - set which tx DAC to use 1215 * @dev: pointer to adapter structure 1216 * @dac: DAC index, values are 0-based 1217 */ 1218 void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac) 1219 { 1220 mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3); 1221 } 1222 1223 int mt7601u_phy_init(struct mt7601u_dev *dev) 1224 { 1225 int ret; 1226 1227 dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0); 1228 dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1); 1229 1230 ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off); 1231 if (ret) 1232 return ret; 1233 ret = mt7601u_write_reg_pairs(dev, 0, rf_central, 1234 ARRAY_SIZE(rf_central)); 1235 if (ret) 1236 return ret; 1237 ret = mt7601u_write_reg_pairs(dev, 0, rf_channel, 1238 ARRAY_SIZE(rf_channel)); 1239 if (ret) 1240 return ret; 1241 ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga)); 1242 if (ret) 1243 return ret; 1244 1245 ret = mt7601u_init_cal(dev); 1246 if (ret) 1247 return ret; 1248 1249 dev->prev_pwr_diff = 100; 1250 1251 INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate); 1252 INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal); 1253 1254 return 0; 1255 } 1256