1 /*
2  * Copyright (C) 2016 Felix Fietkau <nbd@nbd.name>
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #include <linux/delay.h>
18 #include "mt76x2.h"
19 #include "mcu.h"
20 #include "eeprom.h"
21 #include "../mt76x02_phy.h"
22 
23 static bool
24 mt76x2_phy_tssi_init_cal(struct mt76x02_dev *dev)
25 {
26 	struct ieee80211_channel *chan = dev->mt76.chandef.chan;
27 	u32 flag = 0;
28 
29 	if (!mt76x2_tssi_enabled(dev))
30 		return false;
31 
32 	if (mt76x2_channel_silent(dev))
33 		return false;
34 
35 	if (chan->band == NL80211_BAND_5GHZ)
36 		flag |= BIT(0);
37 
38 	if (mt76x02_ext_pa_enabled(dev, chan->band))
39 		flag |= BIT(8);
40 
41 	mt76x02_mcu_calibrate(dev, MCU_CAL_TSSI, flag);
42 	dev->cal.tssi_cal_done = true;
43 	return true;
44 }
45 
46 static void
47 mt76x2_phy_channel_calibrate(struct mt76x02_dev *dev, bool mac_stopped)
48 {
49 	struct ieee80211_channel *chan = dev->mt76.chandef.chan;
50 	bool is_5ghz = chan->band == NL80211_BAND_5GHZ;
51 
52 	if (dev->cal.channel_cal_done)
53 		return;
54 
55 	if (mt76x2_channel_silent(dev))
56 		return;
57 
58 	if (!dev->cal.tssi_cal_done)
59 		mt76x2_phy_tssi_init_cal(dev);
60 
61 	if (!mac_stopped)
62 		mt76x2_mac_stop(dev, false);
63 
64 	if (is_5ghz)
65 		mt76x02_mcu_calibrate(dev, MCU_CAL_LC, 0);
66 
67 	mt76x02_mcu_calibrate(dev, MCU_CAL_TX_LOFT, is_5ghz);
68 	mt76x02_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz);
69 	mt76x02_mcu_calibrate(dev, MCU_CAL_RXIQC_FI, is_5ghz);
70 	mt76x02_mcu_calibrate(dev, MCU_CAL_TEMP_SENSOR, 0);
71 	mt76x02_mcu_calibrate(dev, MCU_CAL_TX_SHAPING, 0);
72 
73 	if (!mac_stopped)
74 		mt76x2_mac_resume(dev);
75 
76 	mt76x2_apply_gain_adj(dev);
77 	mt76x02_edcca_init(dev);
78 
79 	dev->cal.channel_cal_done = true;
80 }
81 
82 void mt76x2_phy_set_antenna(struct mt76x02_dev *dev)
83 {
84 	u32 val;
85 
86 	val = mt76_rr(dev, MT_BBP(AGC, 0));
87 	val &= ~(BIT(4) | BIT(1));
88 	switch (dev->mt76.antenna_mask) {
89 	case 1:
90 		/* disable mac DAC control */
91 		mt76_clear(dev, MT_BBP(IBI, 9), BIT(11));
92 		mt76_clear(dev, MT_BBP(TXBE, 5), 3);
93 		mt76_rmw_field(dev, MT_TX_PIN_CFG, MT_TX_PIN_CFG_TXANT, 0x3);
94 		mt76_rmw_field(dev, MT_BBP(CORE, 32), GENMASK(21, 20), 2);
95 		/* disable DAC 1 */
96 		mt76_rmw_field(dev, MT_BBP(CORE, 33), GENMASK(12, 9), 4);
97 
98 		val &= ~(BIT(3) | BIT(0));
99 		break;
100 	case 2:
101 		/* disable mac DAC control */
102 		mt76_clear(dev, MT_BBP(IBI, 9), BIT(11));
103 		mt76_rmw_field(dev, MT_BBP(TXBE, 5), 3, 1);
104 		mt76_rmw_field(dev, MT_TX_PIN_CFG, MT_TX_PIN_CFG_TXANT, 0xc);
105 		mt76_rmw_field(dev, MT_BBP(CORE, 32), GENMASK(21, 20), 1);
106 		/* disable DAC 0 */
107 		mt76_rmw_field(dev, MT_BBP(CORE, 33), GENMASK(12, 9), 1);
108 
109 		val &= ~BIT(3);
110 		val |= BIT(0);
111 		break;
112 	case 3:
113 	default:
114 		/* enable mac DAC control */
115 		mt76_set(dev, MT_BBP(IBI, 9), BIT(11));
116 		mt76_set(dev, MT_BBP(TXBE, 5), 3);
117 		mt76_rmw_field(dev, MT_TX_PIN_CFG, MT_TX_PIN_CFG_TXANT, 0xf);
118 		mt76_clear(dev, MT_BBP(CORE, 32), GENMASK(21, 20));
119 		mt76_clear(dev, MT_BBP(CORE, 33), GENMASK(12, 9));
120 
121 		val &= ~BIT(0);
122 		val |= BIT(3);
123 		break;
124 	}
125 	mt76_wr(dev, MT_BBP(AGC, 0), val);
126 }
127 
128 int mt76x2_phy_set_channel(struct mt76x02_dev *dev,
129 			   struct cfg80211_chan_def *chandef)
130 {
131 	struct ieee80211_channel *chan = chandef->chan;
132 	bool scan = test_bit(MT76_SCANNING, &dev->mt76.state);
133 	enum nl80211_band band = chan->band;
134 	u8 channel;
135 
136 	u32 ext_cca_chan[4] = {
137 		[0] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 0) |
138 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 1) |
139 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
140 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
141 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(0)),
142 		[1] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 1) |
143 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 0) |
144 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
145 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
146 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(1)),
147 		[2] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 2) |
148 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 3) |
149 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
150 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
151 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(2)),
152 		[3] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 3) |
153 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 2) |
154 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
155 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
156 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(3)),
157 	};
158 	int ch_group_index;
159 	u8 bw, bw_index;
160 	int freq, freq1;
161 	int ret;
162 
163 	dev->cal.channel_cal_done = false;
164 	freq = chandef->chan->center_freq;
165 	freq1 = chandef->center_freq1;
166 	channel = chan->hw_value;
167 
168 	switch (chandef->width) {
169 	case NL80211_CHAN_WIDTH_40:
170 		bw = 1;
171 		if (freq1 > freq) {
172 			bw_index = 1;
173 			ch_group_index = 0;
174 		} else {
175 			bw_index = 3;
176 			ch_group_index = 1;
177 		}
178 		channel += 2 - ch_group_index * 4;
179 		break;
180 	case NL80211_CHAN_WIDTH_80:
181 		ch_group_index = (freq - freq1 + 30) / 20;
182 		if (WARN_ON(ch_group_index < 0 || ch_group_index > 3))
183 			ch_group_index = 0;
184 		bw = 2;
185 		bw_index = ch_group_index;
186 		channel += 6 - ch_group_index * 4;
187 		break;
188 	default:
189 		bw = 0;
190 		bw_index = 0;
191 		ch_group_index = 0;
192 		break;
193 	}
194 
195 	mt76x2_read_rx_gain(dev);
196 	mt76x2_phy_set_txpower_regs(dev, band);
197 	mt76x2_configure_tx_delay(dev, band, bw);
198 	mt76x2_phy_set_txpower(dev);
199 
200 	mt76x02_phy_set_band(dev, chan->band, ch_group_index & 1);
201 	mt76x02_phy_set_bw(dev, chandef->width, ch_group_index);
202 
203 	mt76_rmw(dev, MT_EXT_CCA_CFG,
204 		 (MT_EXT_CCA_CFG_CCA0 |
205 		  MT_EXT_CCA_CFG_CCA1 |
206 		  MT_EXT_CCA_CFG_CCA2 |
207 		  MT_EXT_CCA_CFG_CCA3 |
208 		  MT_EXT_CCA_CFG_CCA_MASK),
209 		 ext_cca_chan[ch_group_index]);
210 
211 	ret = mt76x2_mcu_set_channel(dev, channel, bw, bw_index, scan);
212 	if (ret)
213 		return ret;
214 
215 	mt76x2_mcu_init_gain(dev, channel, dev->cal.rx.mcu_gain, true);
216 
217 	mt76x2_phy_set_antenna(dev);
218 
219 	/* Enable LDPC Rx */
220 	if (mt76xx_rev(dev) >= MT76XX_REV_E3)
221 		mt76_set(dev, MT_BBP(RXO, 13), BIT(10));
222 
223 	if (!dev->cal.init_cal_done) {
224 		u8 val = mt76x02_eeprom_get(dev, MT_EE_BT_RCAL_RESULT);
225 
226 		if (val != 0xff)
227 			mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0);
228 	}
229 
230 	mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, channel);
231 
232 	/* Rx LPF calibration */
233 	if (!dev->cal.init_cal_done)
234 		mt76x02_mcu_calibrate(dev, MCU_CAL_RC, 0);
235 
236 	dev->cal.init_cal_done = true;
237 
238 	mt76_wr(dev, MT_BBP(AGC, 61), 0xFF64A4E2);
239 	mt76_wr(dev, MT_BBP(AGC, 7), 0x08081010);
240 	mt76_wr(dev, MT_BBP(AGC, 11), 0x00000404);
241 	mt76_wr(dev, MT_BBP(AGC, 2), 0x00007070);
242 	mt76_wr(dev, MT_TXOP_CTRL_CFG, 0x04101B3F);
243 
244 	if (scan)
245 		return 0;
246 
247 	mt76x2_phy_channel_calibrate(dev, true);
248 	mt76x02_init_agc_gain(dev);
249 
250 	/* init default values for temp compensation */
251 	if (mt76x2_tssi_enabled(dev)) {
252 		mt76_rmw_field(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
253 			       0x38);
254 		mt76_rmw_field(dev, MT_TX_ALC_CFG_2, MT_TX_ALC_CFG_2_TEMP_COMP,
255 			       0x38);
256 	}
257 
258 	ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work,
259 				     MT_CALIBRATE_INTERVAL);
260 
261 	return 0;
262 }
263 
264 static void
265 mt76x2_phy_temp_compensate(struct mt76x02_dev *dev)
266 {
267 	struct mt76x2_temp_comp t;
268 	int temp, db_diff;
269 
270 	if (mt76x2_get_temp_comp(dev, &t))
271 		return;
272 
273 	temp = mt76_get_field(dev, MT_TEMP_SENSOR, MT_TEMP_SENSOR_VAL);
274 	temp -= t.temp_25_ref;
275 	temp = (temp * 1789) / 1000 + 25;
276 	dev->cal.temp = temp;
277 
278 	if (temp > 25)
279 		db_diff = (temp - 25) / t.high_slope;
280 	else
281 		db_diff = (25 - temp) / t.low_slope;
282 
283 	db_diff = min(db_diff, t.upper_bound);
284 	db_diff = max(db_diff, t.lower_bound);
285 
286 	mt76_rmw_field(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
287 		       db_diff * 2);
288 	mt76_rmw_field(dev, MT_TX_ALC_CFG_2, MT_TX_ALC_CFG_2_TEMP_COMP,
289 		       db_diff * 2);
290 }
291 
292 void mt76x2_phy_calibrate(struct work_struct *work)
293 {
294 	struct mt76x02_dev *dev;
295 
296 	dev = container_of(work, struct mt76x02_dev, cal_work.work);
297 
298 	mutex_lock(&dev->mt76.mutex);
299 
300 	mt76x2_phy_channel_calibrate(dev, false);
301 	mt76x2_phy_tssi_compensate(dev);
302 	mt76x2_phy_temp_compensate(dev);
303 	mt76x2_phy_update_channel_gain(dev);
304 
305 	mutex_unlock(&dev->mt76.mutex);
306 
307 	ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work,
308 				     MT_CALIBRATE_INTERVAL);
309 }
310 
311 int mt76x2_phy_start(struct mt76x02_dev *dev)
312 {
313 	int ret;
314 
315 	ret = mt76x02_mcu_set_radio_state(dev, true);
316 	if (ret)
317 		return ret;
318 
319 	mt76x2_mcu_load_cr(dev, MT_RF_BBP_CR, 0, 0);
320 
321 	return ret;
322 }
323