1 // SPDX-License-Identifier: ISC 2 /* Copyright (C) 2020 MediaTek Inc. 3 * 4 * Author: Lorenzo Bianconi <lorenzo@kernel.org> 5 * Sean Wang <sean.wang@mediatek.com> 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/usb.h> 11 12 #include "mt7615.h" 13 #include "mac.h" 14 #include "mcu.h" 15 #include "regs.h" 16 17 const u32 mt7663_usb_sdio_reg_map[] = { 18 [MT_TOP_CFG_BASE] = 0x80020000, 19 [MT_HW_BASE] = 0x80000000, 20 [MT_DMA_SHDL_BASE] = 0x5000a000, 21 [MT_HIF_BASE] = 0x50000000, 22 [MT_CSR_BASE] = 0x40000000, 23 [MT_EFUSE_ADDR_BASE] = 0x78011000, 24 [MT_TOP_MISC_BASE] = 0x81020000, 25 [MT_PLE_BASE] = 0x82060000, 26 [MT_PSE_BASE] = 0x82068000, 27 [MT_PP_BASE] = 0x8206c000, 28 [MT_WTBL_BASE_ADDR] = 0x820e0000, 29 [MT_CFG_BASE] = 0x820f0000, 30 [MT_AGG_BASE] = 0x820f2000, 31 [MT_ARB_BASE] = 0x820f3000, 32 [MT_TMAC_BASE] = 0x820f4000, 33 [MT_RMAC_BASE] = 0x820f5000, 34 [MT_DMA_BASE] = 0x820f7000, 35 [MT_PF_BASE] = 0x820f8000, 36 [MT_WTBL_BASE_ON] = 0x820f9000, 37 [MT_WTBL_BASE_OFF] = 0x820f9800, 38 [MT_LPON_BASE] = 0x820fb000, 39 [MT_MIB_BASE] = 0x820fd000, 40 }; 41 EXPORT_SYMBOL_GPL(mt7663_usb_sdio_reg_map); 42 43 static void 44 mt7663_usb_sdio_write_txwi(struct mt7615_dev *dev, struct mt76_wcid *wcid, 45 enum mt76_txq_id qid, struct ieee80211_sta *sta, 46 struct ieee80211_key_conf *key, int pid, 47 struct sk_buff *skb) 48 { 49 __le32 *txwi = (__le32 *)(skb->data - MT_USB_TXD_SIZE); 50 51 memset(txwi, 0, MT_USB_TXD_SIZE); 52 mt7615_mac_write_txwi(dev, txwi, skb, wcid, sta, pid, key, false); 53 skb_push(skb, MT_USB_TXD_SIZE); 54 } 55 56 static int mt7663_usb_sdio_set_rates(struct mt7615_dev *dev, 57 struct mt7615_wtbl_rate_desc *wrd) 58 { 59 struct mt7615_rate_desc *rate = &wrd->rate; 60 struct mt7615_sta *sta = wrd->sta; 61 u32 w5, w27, addr, val; 62 u16 idx; 63 64 lockdep_assert_held(&dev->mt76.mutex); 65 66 if (!sta) 67 return -EINVAL; 68 69 if (!mt76_poll(dev, MT_WTBL_UPDATE, MT_WTBL_UPDATE_BUSY, 0, 5000)) 70 return -ETIMEDOUT; 71 72 addr = mt7615_mac_wtbl_addr(dev, sta->wcid.idx); 73 74 w27 = mt76_rr(dev, addr + 27 * 4); 75 w27 &= ~MT_WTBL_W27_CC_BW_SEL; 76 w27 |= FIELD_PREP(MT_WTBL_W27_CC_BW_SEL, rate->bw); 77 78 w5 = mt76_rr(dev, addr + 5 * 4); 79 w5 &= ~(MT_WTBL_W5_BW_CAP | MT_WTBL_W5_CHANGE_BW_RATE | 80 MT_WTBL_W5_MPDU_OK_COUNT | 81 MT_WTBL_W5_MPDU_FAIL_COUNT | 82 MT_WTBL_W5_RATE_IDX); 83 w5 |= FIELD_PREP(MT_WTBL_W5_BW_CAP, rate->bw) | 84 FIELD_PREP(MT_WTBL_W5_CHANGE_BW_RATE, 85 rate->bw_idx ? rate->bw_idx - 1 : 7); 86 87 mt76_wr(dev, MT_WTBL_RIUCR0, w5); 88 89 mt76_wr(dev, MT_WTBL_RIUCR1, 90 FIELD_PREP(MT_WTBL_RIUCR1_RATE0, rate->probe_val) | 91 FIELD_PREP(MT_WTBL_RIUCR1_RATE1, rate->val[0]) | 92 FIELD_PREP(MT_WTBL_RIUCR1_RATE2_LO, rate->val[1])); 93 94 mt76_wr(dev, MT_WTBL_RIUCR2, 95 FIELD_PREP(MT_WTBL_RIUCR2_RATE2_HI, rate->val[1] >> 8) | 96 FIELD_PREP(MT_WTBL_RIUCR2_RATE3, rate->val[1]) | 97 FIELD_PREP(MT_WTBL_RIUCR2_RATE4, rate->val[2]) | 98 FIELD_PREP(MT_WTBL_RIUCR2_RATE5_LO, rate->val[2])); 99 100 mt76_wr(dev, MT_WTBL_RIUCR3, 101 FIELD_PREP(MT_WTBL_RIUCR3_RATE5_HI, rate->val[2] >> 4) | 102 FIELD_PREP(MT_WTBL_RIUCR3_RATE6, rate->val[3]) | 103 FIELD_PREP(MT_WTBL_RIUCR3_RATE7, rate->val[3])); 104 105 mt76_wr(dev, MT_WTBL_UPDATE, 106 FIELD_PREP(MT_WTBL_UPDATE_WLAN_IDX, sta->wcid.idx) | 107 MT_WTBL_UPDATE_RATE_UPDATE | 108 MT_WTBL_UPDATE_TX_COUNT_CLEAR); 109 110 mt76_wr(dev, addr + 27 * 4, w27); 111 112 sta->rate_probe = sta->rateset[rate->rateset].probe_rate.idx != -1; 113 114 idx = sta->vif->mt76.omac_idx; 115 idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx; 116 addr = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx); 117 118 mt76_rmw(dev, addr, MT_LPON_TCR_MODE, MT_LPON_TCR_READ); /* TSF read */ 119 val = mt76_rr(dev, MT_LPON_UTTR0); 120 sta->rate_set_tsf = (val & ~BIT(0)) | rate->rateset; 121 122 if (!(sta->wcid.tx_info & MT_WCID_TX_INFO_SET)) 123 mt76_poll(dev, MT_WTBL_UPDATE, MT_WTBL_UPDATE_BUSY, 0, 5000); 124 125 sta->rate_count = 2 * MT7615_RATE_RETRY * sta->n_rates; 126 sta->wcid.tx_info |= MT_WCID_TX_INFO_SET; 127 128 return 0; 129 } 130 131 static void mt7663_usb_sdio_rate_work(struct work_struct *work) 132 { 133 struct mt7615_wtbl_rate_desc *wrd, *wrd_next; 134 struct list_head wrd_list; 135 struct mt7615_dev *dev; 136 137 dev = (struct mt7615_dev *)container_of(work, struct mt7615_dev, 138 rate_work); 139 140 INIT_LIST_HEAD(&wrd_list); 141 spin_lock_bh(&dev->mt76.lock); 142 list_splice_init(&dev->wrd_head, &wrd_list); 143 spin_unlock_bh(&dev->mt76.lock); 144 145 list_for_each_entry_safe(wrd, wrd_next, &wrd_list, node) { 146 list_del(&wrd->node); 147 148 mt7615_mutex_acquire(dev); 149 mt7663_usb_sdio_set_rates(dev, wrd); 150 mt7615_mutex_release(dev); 151 152 kfree(wrd); 153 } 154 } 155 156 bool mt7663_usb_sdio_tx_status_data(struct mt76_dev *mdev, u8 *update) 157 { 158 struct mt7615_dev *dev = container_of(mdev, struct mt7615_dev, mt76); 159 160 mt7615_mutex_acquire(dev); 161 mt7615_mac_sta_poll(dev); 162 mt7615_mutex_release(dev); 163 164 return false; 165 } 166 EXPORT_SYMBOL_GPL(mt7663_usb_sdio_tx_status_data); 167 168 void mt7663_usb_sdio_tx_complete_skb(struct mt76_dev *mdev, 169 struct mt76_queue_entry *e) 170 { 171 unsigned int headroom = MT_USB_TXD_SIZE; 172 173 if (mt76_is_usb(mdev)) 174 headroom += MT_USB_HDR_SIZE; 175 skb_pull(e->skb, headroom); 176 177 mt76_tx_complete_skb(mdev, e->wcid, e->skb); 178 } 179 EXPORT_SYMBOL_GPL(mt7663_usb_sdio_tx_complete_skb); 180 181 int mt7663_usb_sdio_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr, 182 enum mt76_txq_id qid, struct mt76_wcid *wcid, 183 struct ieee80211_sta *sta, 184 struct mt76_tx_info *tx_info) 185 { 186 struct mt7615_dev *dev = container_of(mdev, struct mt7615_dev, mt76); 187 struct sk_buff *skb = tx_info->skb; 188 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); 189 struct ieee80211_key_conf *key = info->control.hw_key; 190 struct mt7615_sta *msta; 191 int pad, err, pktid; 192 193 msta = wcid ? container_of(wcid, struct mt7615_sta, wcid) : NULL; 194 if (!wcid) 195 wcid = &dev->mt76.global_wcid; 196 197 if ((info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) && 198 msta && !msta->rate_probe) { 199 /* request to configure sampling rate */ 200 spin_lock_bh(&dev->mt76.lock); 201 mt7615_mac_set_rates(&dev->phy, msta, &info->control.rates[0], 202 msta->rates); 203 spin_unlock_bh(&dev->mt76.lock); 204 } 205 206 pktid = mt76_tx_status_skb_add(&dev->mt76, wcid, skb); 207 mt7663_usb_sdio_write_txwi(dev, wcid, qid, sta, key, pktid, skb); 208 if (mt76_is_usb(mdev)) { 209 u32 len = skb->len; 210 211 put_unaligned_le32(len, skb_push(skb, sizeof(len))); 212 pad = round_up(skb->len, 4) + 4 - skb->len; 213 } else { 214 pad = round_up(skb->len, 4) - skb->len; 215 } 216 217 err = mt76_skb_adjust_pad(skb, pad); 218 if (err) 219 /* Release pktid in case of error. */ 220 idr_remove(&wcid->pktid, pktid); 221 222 return err; 223 } 224 EXPORT_SYMBOL_GPL(mt7663_usb_sdio_tx_prepare_skb); 225 226 static int mt7663u_dma_sched_init(struct mt7615_dev *dev) 227 { 228 int i; 229 230 mt76_rmw(dev, MT_DMA_SHDL(MT_DMASHDL_PKT_MAX_SIZE), 231 MT_DMASHDL_PKT_MAX_SIZE_PLE | MT_DMASHDL_PKT_MAX_SIZE_PSE, 232 FIELD_PREP(MT_DMASHDL_PKT_MAX_SIZE_PLE, 1) | 233 FIELD_PREP(MT_DMASHDL_PKT_MAX_SIZE_PSE, 8)); 234 235 /* disable refill group 5 - group 15 and raise group 2 236 * and 3 as high priority. 237 */ 238 mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_REFILL), 0xffe00006); 239 mt76_clear(dev, MT_DMA_SHDL(MT_DMASHDL_PAGE), BIT(16)); 240 241 for (i = 0; i < 5; i++) 242 mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_GROUP_QUOTA(i)), 243 FIELD_PREP(MT_DMASHDL_GROUP_QUOTA_MIN, 0x3) | 244 FIELD_PREP(MT_DMASHDL_GROUP_QUOTA_MAX, 0x1ff)); 245 246 mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_Q_MAP(0)), 0x42104210); 247 mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_Q_MAP(1)), 0x42104210); 248 249 mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_Q_MAP(2)), 0x4444); 250 251 /* group pririority from high to low: 252 * 15 (cmd groups) > 4 > 3 > 2 > 1 > 0. 253 */ 254 mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_SCHED_SET0), 0x6501234f); 255 mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_SCHED_SET1), 0xedcba987); 256 mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_OPTIONAL), 0x7004801c); 257 258 mt76_wr(dev, MT_UDMA_WLCFG_1, 259 FIELD_PREP(MT_WL_TX_TMOUT_LMT, 80000) | 260 FIELD_PREP(MT_WL_RX_AGG_PKT_LMT, 1)); 261 262 /* setup UDMA Rx Flush */ 263 mt76_clear(dev, MT_UDMA_WLCFG_0, MT_WL_RX_FLUSH); 264 /* hif reset */ 265 mt76_set(dev, MT_HIF_RST, MT_HIF_LOGIC_RST_N); 266 267 mt76_set(dev, MT_UDMA_WLCFG_0, 268 MT_WL_RX_AGG_EN | MT_WL_RX_EN | MT_WL_TX_EN | 269 MT_WL_RX_MPSZ_PAD0 | MT_TICK_1US_EN | 270 MT_WL_TX_TMOUT_FUNC_EN); 271 mt76_rmw(dev, MT_UDMA_WLCFG_0, MT_WL_RX_AGG_LMT | MT_WL_RX_AGG_TO, 272 FIELD_PREP(MT_WL_RX_AGG_LMT, 32) | 273 FIELD_PREP(MT_WL_RX_AGG_TO, 100)); 274 275 return 0; 276 } 277 278 static int mt7663_usb_sdio_init_hardware(struct mt7615_dev *dev) 279 { 280 int ret, idx; 281 282 ret = mt7615_eeprom_init(dev, MT_EFUSE_BASE); 283 if (ret < 0) 284 return ret; 285 286 if (mt76_is_usb(&dev->mt76)) { 287 ret = mt7663u_dma_sched_init(dev); 288 if (ret) 289 return ret; 290 } 291 292 set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state); 293 294 /* Beacon and mgmt frames should occupy wcid 0 */ 295 idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7615_WTBL_STA - 1); 296 if (idx) 297 return -ENOSPC; 298 299 dev->mt76.global_wcid.idx = idx; 300 dev->mt76.global_wcid.hw_key_idx = -1; 301 rcu_assign_pointer(dev->mt76.wcid[idx], &dev->mt76.global_wcid); 302 303 return 0; 304 } 305 306 int mt7663_usb_sdio_register_device(struct mt7615_dev *dev) 307 { 308 struct ieee80211_hw *hw = mt76_hw(dev); 309 int err; 310 311 INIT_WORK(&dev->rate_work, mt7663_usb_sdio_rate_work); 312 INIT_LIST_HEAD(&dev->wrd_head); 313 mt7615_init_device(dev); 314 315 err = mt7663_usb_sdio_init_hardware(dev); 316 if (err) 317 return err; 318 319 hw->extra_tx_headroom += MT_USB_TXD_SIZE; 320 if (mt76_is_usb(&dev->mt76)) { 321 hw->extra_tx_headroom += MT_USB_HDR_SIZE; 322 /* check hw sg support in order to enable AMSDU */ 323 if (dev->mt76.usb.sg_en) 324 hw->max_tx_fragments = MT_HW_TXP_MAX_BUF_NUM; 325 else 326 hw->max_tx_fragments = 1; 327 } 328 329 err = mt76_register_device(&dev->mt76, true, mt76_rates, 330 ARRAY_SIZE(mt76_rates)); 331 if (err < 0) 332 return err; 333 334 if (!dev->mt76.usb.sg_en) { 335 struct ieee80211_sta_vht_cap *vht_cap; 336 337 /* decrease max A-MSDU size if SG is not supported */ 338 vht_cap = &dev->mphy.sband_5g.sband.vht_cap; 339 vht_cap->cap &= ~IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454; 340 } 341 342 ieee80211_queue_work(hw, &dev->mcu_work); 343 mt7615_init_txpower(dev, &dev->mphy.sband_2g.sband); 344 mt7615_init_txpower(dev, &dev->mphy.sband_5g.sband); 345 346 return mt7615_init_debugfs(dev); 347 } 348 EXPORT_SYMBOL_GPL(mt7663_usb_sdio_register_device); 349 350 MODULE_AUTHOR("Lorenzo Bianconi <lorenzo@kernel.org>"); 351 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); 352 MODULE_LICENSE("Dual BSD/GPL"); 353