1 /* 2 * NXP Wireless LAN device driver: USB specific handling 3 * 4 * Copyright 2011-2020 NXP 5 * 6 * This software file (the "File") is distributed by NXP 7 * under the terms of the GNU General Public License Version 2, June 1991 8 * (the "License"). You may use, redistribute and/or modify this File in 9 * accordance with the terms and conditions of the License, a copy of which 10 * is available by writing to the Free Software Foundation, Inc., 11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the 12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. 13 * 14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE 15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE 16 * ARE EXPRESSLY DISCLAIMED. The License provides additional details about 17 * this warranty disclaimer. 18 */ 19 20 #include "main.h" 21 #include "usb.h" 22 23 #define USB_VERSION "1.0" 24 25 static struct mwifiex_if_ops usb_ops; 26 27 static const struct usb_device_id mwifiex_usb_table[] = { 28 /* 8766 */ 29 {USB_DEVICE(USB8XXX_VID, USB8766_PID_1)}, 30 {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8766_PID_2, 31 USB_CLASS_VENDOR_SPEC, 32 USB_SUBCLASS_VENDOR_SPEC, 0xff)}, 33 /* 8797 */ 34 {USB_DEVICE(USB8XXX_VID, USB8797_PID_1)}, 35 {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8797_PID_2, 36 USB_CLASS_VENDOR_SPEC, 37 USB_SUBCLASS_VENDOR_SPEC, 0xff)}, 38 /* 8801 */ 39 {USB_DEVICE(USB8XXX_VID, USB8801_PID_1)}, 40 {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8801_PID_2, 41 USB_CLASS_VENDOR_SPEC, 42 USB_SUBCLASS_VENDOR_SPEC, 0xff)}, 43 /* 8997 */ 44 {USB_DEVICE(USB8XXX_VID, USB8997_PID_1)}, 45 {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8997_PID_2, 46 USB_CLASS_VENDOR_SPEC, 47 USB_SUBCLASS_VENDOR_SPEC, 0xff)}, 48 { } /* Terminating entry */ 49 }; 50 51 MODULE_DEVICE_TABLE(usb, mwifiex_usb_table); 52 53 static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size); 54 55 /* This function handles received packet. Necessary action is taken based on 56 * cmd/event/data. 57 */ 58 static int mwifiex_usb_recv(struct mwifiex_adapter *adapter, 59 struct sk_buff *skb, u8 ep) 60 { 61 u32 recv_type; 62 __le32 tmp; 63 int ret; 64 65 if (adapter->hs_activated) 66 mwifiex_process_hs_config(adapter); 67 68 if (skb->len < INTF_HEADER_LEN) { 69 mwifiex_dbg(adapter, ERROR, 70 "%s: invalid skb->len\n", __func__); 71 return -1; 72 } 73 74 switch (ep) { 75 case MWIFIEX_USB_EP_CMD_EVENT: 76 mwifiex_dbg(adapter, EVENT, 77 "%s: EP_CMD_EVENT\n", __func__); 78 skb_copy_from_linear_data(skb, &tmp, INTF_HEADER_LEN); 79 recv_type = le32_to_cpu(tmp); 80 skb_pull(skb, INTF_HEADER_LEN); 81 82 switch (recv_type) { 83 case MWIFIEX_USB_TYPE_CMD: 84 if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) { 85 mwifiex_dbg(adapter, ERROR, 86 "CMD: skb->len too large\n"); 87 ret = -1; 88 goto exit_restore_skb; 89 } else if (!adapter->curr_cmd) { 90 mwifiex_dbg(adapter, WARN, "CMD: no curr_cmd\n"); 91 if (adapter->ps_state == PS_STATE_SLEEP_CFM) { 92 mwifiex_process_sleep_confirm_resp( 93 adapter, skb->data, 94 skb->len); 95 ret = 0; 96 goto exit_restore_skb; 97 } 98 ret = -1; 99 goto exit_restore_skb; 100 } 101 102 adapter->curr_cmd->resp_skb = skb; 103 adapter->cmd_resp_received = true; 104 break; 105 case MWIFIEX_USB_TYPE_EVENT: 106 if (skb->len < sizeof(u32)) { 107 mwifiex_dbg(adapter, ERROR, 108 "EVENT: skb->len too small\n"); 109 ret = -1; 110 goto exit_restore_skb; 111 } 112 skb_copy_from_linear_data(skb, &tmp, sizeof(u32)); 113 adapter->event_cause = le32_to_cpu(tmp); 114 mwifiex_dbg(adapter, EVENT, 115 "event_cause %#x\n", adapter->event_cause); 116 117 if (skb->len > MAX_EVENT_SIZE) { 118 mwifiex_dbg(adapter, ERROR, 119 "EVENT: event body too large\n"); 120 ret = -1; 121 goto exit_restore_skb; 122 } 123 124 memcpy(adapter->event_body, skb->data + 125 MWIFIEX_EVENT_HEADER_LEN, skb->len); 126 127 adapter->event_received = true; 128 adapter->event_skb = skb; 129 break; 130 default: 131 mwifiex_dbg(adapter, ERROR, 132 "unknown recv_type %#x\n", recv_type); 133 ret = -1; 134 goto exit_restore_skb; 135 } 136 break; 137 case MWIFIEX_USB_EP_DATA: 138 mwifiex_dbg(adapter, DATA, "%s: EP_DATA\n", __func__); 139 if (skb->len > MWIFIEX_RX_DATA_BUF_SIZE) { 140 mwifiex_dbg(adapter, ERROR, 141 "DATA: skb->len too large\n"); 142 return -1; 143 } 144 145 skb_queue_tail(&adapter->rx_data_q, skb); 146 adapter->data_received = true; 147 atomic_inc(&adapter->rx_pending); 148 break; 149 default: 150 mwifiex_dbg(adapter, ERROR, 151 "%s: unknown endport %#x\n", __func__, ep); 152 return -1; 153 } 154 155 return -EINPROGRESS; 156 157 exit_restore_skb: 158 /* The buffer will be reused for further cmds/events */ 159 skb_push(skb, INTF_HEADER_LEN); 160 161 return ret; 162 } 163 164 static void mwifiex_usb_rx_complete(struct urb *urb) 165 { 166 struct urb_context *context = (struct urb_context *)urb->context; 167 struct mwifiex_adapter *adapter = context->adapter; 168 struct sk_buff *skb = context->skb; 169 struct usb_card_rec *card; 170 int recv_length = urb->actual_length; 171 int size, status; 172 173 if (!adapter || !adapter->card) { 174 pr_err("mwifiex adapter or card structure is not valid\n"); 175 return; 176 } 177 178 card = (struct usb_card_rec *)adapter->card; 179 if (card->rx_cmd_ep == context->ep) 180 atomic_dec(&card->rx_cmd_urb_pending); 181 else 182 atomic_dec(&card->rx_data_urb_pending); 183 184 if (recv_length) { 185 if (urb->status || 186 test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags)) { 187 mwifiex_dbg(adapter, ERROR, 188 "URB status is failed: %d\n", urb->status); 189 /* Do not free skb in case of command ep */ 190 if (card->rx_cmd_ep != context->ep) 191 dev_kfree_skb_any(skb); 192 goto setup_for_next; 193 } 194 if (skb->len > recv_length) 195 skb_trim(skb, recv_length); 196 else 197 skb_put(skb, recv_length - skb->len); 198 199 status = mwifiex_usb_recv(adapter, skb, context->ep); 200 201 mwifiex_dbg(adapter, INFO, 202 "info: recv_length=%d, status=%d\n", 203 recv_length, status); 204 if (status == -EINPROGRESS) { 205 mwifiex_queue_main_work(adapter); 206 207 /* urb for data_ep is re-submitted now; 208 * urb for cmd_ep will be re-submitted in callback 209 * mwifiex_usb_recv_complete 210 */ 211 if (card->rx_cmd_ep == context->ep) 212 return; 213 } else { 214 if (status == -1) 215 mwifiex_dbg(adapter, ERROR, 216 "received data processing failed!\n"); 217 218 /* Do not free skb in case of command ep */ 219 if (card->rx_cmd_ep != context->ep) 220 dev_kfree_skb_any(skb); 221 } 222 } else if (urb->status) { 223 if (!test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { 224 mwifiex_dbg(adapter, FATAL, 225 "Card is removed: %d\n", urb->status); 226 set_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags); 227 } 228 dev_kfree_skb_any(skb); 229 return; 230 } else { 231 /* Do not free skb in case of command ep */ 232 if (card->rx_cmd_ep != context->ep) 233 dev_kfree_skb_any(skb); 234 235 /* fall through setup_for_next */ 236 } 237 238 setup_for_next: 239 if (card->rx_cmd_ep == context->ep) 240 size = MWIFIEX_RX_CMD_BUF_SIZE; 241 else 242 size = MWIFIEX_RX_DATA_BUF_SIZE; 243 244 if (card->rx_cmd_ep == context->ep) { 245 mwifiex_usb_submit_rx_urb(context, size); 246 } else { 247 if (atomic_read(&adapter->rx_pending) <= HIGH_RX_PENDING) { 248 mwifiex_usb_submit_rx_urb(context, size); 249 } else { 250 context->skb = NULL; 251 } 252 } 253 254 return; 255 } 256 257 static void mwifiex_usb_tx_complete(struct urb *urb) 258 { 259 struct urb_context *context = (struct urb_context *)(urb->context); 260 struct mwifiex_adapter *adapter = context->adapter; 261 struct usb_card_rec *card = adapter->card; 262 struct usb_tx_data_port *port; 263 int i; 264 265 mwifiex_dbg(adapter, INFO, 266 "%s: status: %d\n", __func__, urb->status); 267 268 if (context->ep == card->tx_cmd_ep) { 269 mwifiex_dbg(adapter, CMD, 270 "%s: CMD\n", __func__); 271 atomic_dec(&card->tx_cmd_urb_pending); 272 adapter->cmd_sent = false; 273 } else { 274 mwifiex_dbg(adapter, DATA, 275 "%s: DATA\n", __func__); 276 mwifiex_write_data_complete(adapter, context->skb, 0, 277 urb->status ? -1 : 0); 278 for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { 279 port = &card->port[i]; 280 if (context->ep == port->tx_data_ep) { 281 atomic_dec(&port->tx_data_urb_pending); 282 port->block_status = false; 283 break; 284 } 285 } 286 adapter->data_sent = false; 287 } 288 289 if (card->mc_resync_flag) 290 mwifiex_multi_chan_resync(adapter); 291 292 mwifiex_queue_main_work(adapter); 293 294 return; 295 } 296 297 static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size) 298 { 299 struct mwifiex_adapter *adapter = ctx->adapter; 300 struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; 301 302 if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { 303 if (card->rx_cmd_ep == ctx->ep) { 304 mwifiex_dbg(adapter, INFO, "%s: free rx_cmd skb\n", 305 __func__); 306 dev_kfree_skb_any(ctx->skb); 307 ctx->skb = NULL; 308 } 309 mwifiex_dbg(adapter, ERROR, 310 "%s: card removed/suspended, EP %d rx_cmd URB submit skipped\n", 311 __func__, ctx->ep); 312 return -1; 313 } 314 315 if (card->rx_cmd_ep != ctx->ep) { 316 ctx->skb = dev_alloc_skb(size); 317 if (!ctx->skb) { 318 mwifiex_dbg(adapter, ERROR, 319 "%s: dev_alloc_skb failed\n", __func__); 320 return -ENOMEM; 321 } 322 } 323 324 if (card->rx_cmd_ep == ctx->ep && 325 card->rx_cmd_ep_type == USB_ENDPOINT_XFER_INT) 326 usb_fill_int_urb(ctx->urb, card->udev, 327 usb_rcvintpipe(card->udev, ctx->ep), 328 ctx->skb->data, size, mwifiex_usb_rx_complete, 329 (void *)ctx, card->rx_cmd_interval); 330 else 331 usb_fill_bulk_urb(ctx->urb, card->udev, 332 usb_rcvbulkpipe(card->udev, ctx->ep), 333 ctx->skb->data, size, mwifiex_usb_rx_complete, 334 (void *)ctx); 335 336 if (card->rx_cmd_ep == ctx->ep) 337 atomic_inc(&card->rx_cmd_urb_pending); 338 else 339 atomic_inc(&card->rx_data_urb_pending); 340 341 if (usb_submit_urb(ctx->urb, GFP_ATOMIC)) { 342 mwifiex_dbg(adapter, ERROR, "usb_submit_urb failed\n"); 343 dev_kfree_skb_any(ctx->skb); 344 ctx->skb = NULL; 345 346 if (card->rx_cmd_ep == ctx->ep) 347 atomic_dec(&card->rx_cmd_urb_pending); 348 else 349 atomic_dec(&card->rx_data_urb_pending); 350 351 return -1; 352 } 353 354 return 0; 355 } 356 357 static void mwifiex_usb_free(struct usb_card_rec *card) 358 { 359 struct usb_tx_data_port *port; 360 int i, j; 361 362 if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb) 363 usb_kill_urb(card->rx_cmd.urb); 364 365 usb_free_urb(card->rx_cmd.urb); 366 card->rx_cmd.urb = NULL; 367 368 if (atomic_read(&card->rx_data_urb_pending)) 369 for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) 370 if (card->rx_data_list[i].urb) 371 usb_kill_urb(card->rx_data_list[i].urb); 372 373 for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) { 374 usb_free_urb(card->rx_data_list[i].urb); 375 card->rx_data_list[i].urb = NULL; 376 } 377 378 for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { 379 port = &card->port[i]; 380 for (j = 0; j < MWIFIEX_TX_DATA_URB; j++) { 381 usb_kill_urb(port->tx_data_list[j].urb); 382 usb_free_urb(port->tx_data_list[j].urb); 383 port->tx_data_list[j].urb = NULL; 384 } 385 } 386 387 usb_free_urb(card->tx_cmd.urb); 388 card->tx_cmd.urb = NULL; 389 390 return; 391 } 392 393 /* This function probes an mwifiex device and registers it. It allocates 394 * the card structure, initiates the device registration and initialization 395 * procedure by adding a logical interface. 396 */ 397 static int mwifiex_usb_probe(struct usb_interface *intf, 398 const struct usb_device_id *id) 399 { 400 struct usb_device *udev = interface_to_usbdev(intf); 401 struct usb_host_interface *iface_desc = intf->cur_altsetting; 402 struct usb_endpoint_descriptor *epd; 403 int ret, i; 404 struct usb_card_rec *card; 405 u16 id_vendor, id_product, bcd_device; 406 407 card = devm_kzalloc(&intf->dev, sizeof(*card), GFP_KERNEL); 408 if (!card) 409 return -ENOMEM; 410 411 init_completion(&card->fw_done); 412 413 id_vendor = le16_to_cpu(udev->descriptor.idVendor); 414 id_product = le16_to_cpu(udev->descriptor.idProduct); 415 bcd_device = le16_to_cpu(udev->descriptor.bcdDevice); 416 pr_debug("info: VID/PID = %X/%X, Boot2 version = %X\n", 417 id_vendor, id_product, bcd_device); 418 419 /* PID_1 is used for firmware downloading only */ 420 switch (id_product) { 421 case USB8766_PID_1: 422 case USB8797_PID_1: 423 case USB8801_PID_1: 424 case USB8997_PID_1: 425 card->usb_boot_state = USB8XXX_FW_DNLD; 426 break; 427 case USB8766_PID_2: 428 case USB8797_PID_2: 429 case USB8801_PID_2: 430 case USB8997_PID_2: 431 card->usb_boot_state = USB8XXX_FW_READY; 432 break; 433 default: 434 pr_warn("unknown id_product %#x\n", id_product); 435 card->usb_boot_state = USB8XXX_FW_DNLD; 436 break; 437 } 438 439 card->udev = udev; 440 card->intf = intf; 441 442 pr_debug("info: bcdUSB=%#x Device Class=%#x SubClass=%#x Protocol=%#x\n", 443 le16_to_cpu(udev->descriptor.bcdUSB), 444 udev->descriptor.bDeviceClass, 445 udev->descriptor.bDeviceSubClass, 446 udev->descriptor.bDeviceProtocol); 447 448 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { 449 epd = &iface_desc->endpoint[i].desc; 450 if (usb_endpoint_dir_in(epd) && 451 usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT && 452 (usb_endpoint_xfer_bulk(epd) || 453 usb_endpoint_xfer_int(epd))) { 454 card->rx_cmd_ep_type = usb_endpoint_type(epd); 455 card->rx_cmd_interval = epd->bInterval; 456 pr_debug("info: Rx CMD/EVT:: max pkt size: %d, addr: %d, ep_type: %d\n", 457 le16_to_cpu(epd->wMaxPacketSize), 458 epd->bEndpointAddress, card->rx_cmd_ep_type); 459 card->rx_cmd_ep = usb_endpoint_num(epd); 460 atomic_set(&card->rx_cmd_urb_pending, 0); 461 } 462 if (usb_endpoint_dir_in(epd) && 463 usb_endpoint_num(epd) == MWIFIEX_USB_EP_DATA && 464 usb_endpoint_xfer_bulk(epd)) { 465 pr_debug("info: bulk IN: max pkt size: %d, addr: %d\n", 466 le16_to_cpu(epd->wMaxPacketSize), 467 epd->bEndpointAddress); 468 card->rx_data_ep = usb_endpoint_num(epd); 469 atomic_set(&card->rx_data_urb_pending, 0); 470 } 471 if (usb_endpoint_dir_out(epd) && 472 usb_endpoint_num(epd) == MWIFIEX_USB_EP_DATA && 473 usb_endpoint_xfer_bulk(epd)) { 474 pr_debug("info: bulk OUT: max pkt size: %d, addr: %d\n", 475 le16_to_cpu(epd->wMaxPacketSize), 476 epd->bEndpointAddress); 477 card->port[0].tx_data_ep = usb_endpoint_num(epd); 478 atomic_set(&card->port[0].tx_data_urb_pending, 0); 479 } 480 if (usb_endpoint_dir_out(epd) && 481 usb_endpoint_num(epd) == MWIFIEX_USB_EP_DATA_CH2 && 482 usb_endpoint_xfer_bulk(epd)) { 483 pr_debug("info: bulk OUT chan2:\t" 484 "max pkt size: %d, addr: %d\n", 485 le16_to_cpu(epd->wMaxPacketSize), 486 epd->bEndpointAddress); 487 card->port[1].tx_data_ep = usb_endpoint_num(epd); 488 atomic_set(&card->port[1].tx_data_urb_pending, 0); 489 } 490 if (usb_endpoint_dir_out(epd) && 491 usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT && 492 (usb_endpoint_xfer_bulk(epd) || 493 usb_endpoint_xfer_int(epd))) { 494 card->tx_cmd_ep_type = usb_endpoint_type(epd); 495 card->tx_cmd_interval = epd->bInterval; 496 pr_debug("info: bulk OUT: max pkt size: %d, addr: %d\n", 497 le16_to_cpu(epd->wMaxPacketSize), 498 epd->bEndpointAddress); 499 pr_debug("info: Tx CMD:: max pkt size: %d, addr: %d, ep_type: %d\n", 500 le16_to_cpu(epd->wMaxPacketSize), 501 epd->bEndpointAddress, card->tx_cmd_ep_type); 502 card->tx_cmd_ep = usb_endpoint_num(epd); 503 atomic_set(&card->tx_cmd_urb_pending, 0); 504 card->bulk_out_maxpktsize = 505 le16_to_cpu(epd->wMaxPacketSize); 506 } 507 } 508 509 switch (card->usb_boot_state) { 510 case USB8XXX_FW_DNLD: 511 /* Reject broken descriptors. */ 512 if (!card->rx_cmd_ep || !card->tx_cmd_ep) 513 return -ENODEV; 514 if (card->bulk_out_maxpktsize == 0) 515 return -ENODEV; 516 break; 517 case USB8XXX_FW_READY: 518 /* Assume the driver can handle missing endpoints for now. */ 519 break; 520 default: 521 WARN_ON(1); 522 return -ENODEV; 523 } 524 525 usb_set_intfdata(intf, card); 526 527 ret = mwifiex_add_card(card, &card->fw_done, &usb_ops, 528 MWIFIEX_USB, &card->udev->dev); 529 if (ret) { 530 pr_err("%s: mwifiex_add_card failed: %d\n", __func__, ret); 531 usb_reset_device(udev); 532 return ret; 533 } 534 535 usb_get_dev(udev); 536 537 return 0; 538 } 539 540 /* Kernel needs to suspend all functions separately. Therefore all 541 * registered functions must have drivers with suspend and resume 542 * methods. Failing that the kernel simply removes the whole card. 543 * 544 * If already not suspended, this function allocates and sends a 545 * 'host sleep activate' request to the firmware and turns off the traffic. 546 */ 547 static int mwifiex_usb_suspend(struct usb_interface *intf, pm_message_t message) 548 { 549 struct usb_card_rec *card = usb_get_intfdata(intf); 550 struct mwifiex_adapter *adapter; 551 struct usb_tx_data_port *port; 552 int i, j; 553 554 /* Might still be loading firmware */ 555 wait_for_completion(&card->fw_done); 556 557 adapter = card->adapter; 558 if (!adapter) { 559 dev_err(&intf->dev, "card is not valid\n"); 560 return 0; 561 } 562 563 if (unlikely(test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags))) 564 mwifiex_dbg(adapter, WARN, 565 "Device already suspended\n"); 566 567 /* Enable the Host Sleep */ 568 if (!mwifiex_enable_hs(adapter)) { 569 mwifiex_dbg(adapter, ERROR, 570 "cmd: failed to suspend\n"); 571 clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags); 572 return -EFAULT; 573 } 574 575 576 /* 'MWIFIEX_IS_SUSPENDED' bit indicates device is suspended. 577 * It must be set here before the usb_kill_urb() calls. Reason 578 * is in the complete handlers, urb->status(= -ENOENT) and 579 * this flag is used in combination to distinguish between a 580 * 'suspended' state and a 'disconnect' one. 581 */ 582 set_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); 583 clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags); 584 585 if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb) 586 usb_kill_urb(card->rx_cmd.urb); 587 588 if (atomic_read(&card->rx_data_urb_pending)) 589 for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) 590 if (card->rx_data_list[i].urb) 591 usb_kill_urb(card->rx_data_list[i].urb); 592 593 for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { 594 port = &card->port[i]; 595 for (j = 0; j < MWIFIEX_TX_DATA_URB; j++) { 596 if (port->tx_data_list[j].urb) 597 usb_kill_urb(port->tx_data_list[j].urb); 598 } 599 } 600 601 if (card->tx_cmd.urb) 602 usb_kill_urb(card->tx_cmd.urb); 603 604 return 0; 605 } 606 607 /* Kernel needs to suspend all functions separately. Therefore all 608 * registered functions must have drivers with suspend and resume 609 * methods. Failing that the kernel simply removes the whole card. 610 * 611 * If already not resumed, this function turns on the traffic and 612 * sends a 'host sleep cancel' request to the firmware. 613 */ 614 static int mwifiex_usb_resume(struct usb_interface *intf) 615 { 616 struct usb_card_rec *card = usb_get_intfdata(intf); 617 struct mwifiex_adapter *adapter; 618 int i; 619 620 if (!card->adapter) { 621 dev_err(&intf->dev, "%s: card->adapter is NULL\n", 622 __func__); 623 return 0; 624 } 625 adapter = card->adapter; 626 627 if (unlikely(!test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags))) { 628 mwifiex_dbg(adapter, WARN, 629 "Device already resumed\n"); 630 return 0; 631 } 632 633 /* Indicate device resumed. The netdev queue will be resumed only 634 * after the urbs have been re-submitted 635 */ 636 clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); 637 638 if (!atomic_read(&card->rx_data_urb_pending)) 639 for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) 640 mwifiex_usb_submit_rx_urb(&card->rx_data_list[i], 641 MWIFIEX_RX_DATA_BUF_SIZE); 642 643 if (!atomic_read(&card->rx_cmd_urb_pending)) { 644 card->rx_cmd.skb = dev_alloc_skb(MWIFIEX_RX_CMD_BUF_SIZE); 645 if (card->rx_cmd.skb) 646 mwifiex_usb_submit_rx_urb(&card->rx_cmd, 647 MWIFIEX_RX_CMD_BUF_SIZE); 648 } 649 650 /* Disable Host Sleep */ 651 if (adapter->hs_activated) 652 mwifiex_cancel_hs(mwifiex_get_priv(adapter, 653 MWIFIEX_BSS_ROLE_ANY), 654 MWIFIEX_ASYNC_CMD); 655 656 return 0; 657 } 658 659 static void mwifiex_usb_disconnect(struct usb_interface *intf) 660 { 661 struct usb_card_rec *card = usb_get_intfdata(intf); 662 struct mwifiex_adapter *adapter; 663 664 wait_for_completion(&card->fw_done); 665 666 adapter = card->adapter; 667 if (!adapter || !adapter->priv_num) 668 return; 669 670 if (card->udev->state != USB_STATE_NOTATTACHED && !adapter->mfg_mode) { 671 mwifiex_deauthenticate_all(adapter); 672 673 mwifiex_init_shutdown_fw(mwifiex_get_priv(adapter, 674 MWIFIEX_BSS_ROLE_ANY), 675 MWIFIEX_FUNC_SHUTDOWN); 676 } 677 678 mwifiex_dbg(adapter, FATAL, 679 "%s: removing card\n", __func__); 680 mwifiex_remove_card(adapter); 681 682 usb_put_dev(interface_to_usbdev(intf)); 683 } 684 685 static void mwifiex_usb_coredump(struct device *dev) 686 { 687 struct usb_interface *intf = to_usb_interface(dev); 688 struct usb_card_rec *card = usb_get_intfdata(intf); 689 690 mwifiex_fw_dump_event(mwifiex_get_priv(card->adapter, 691 MWIFIEX_BSS_ROLE_ANY)); 692 } 693 694 static struct usb_driver mwifiex_usb_driver = { 695 .name = "mwifiex_usb", 696 .probe = mwifiex_usb_probe, 697 .disconnect = mwifiex_usb_disconnect, 698 .id_table = mwifiex_usb_table, 699 .suspend = mwifiex_usb_suspend, 700 .resume = mwifiex_usb_resume, 701 .soft_unbind = 1, 702 .drvwrap.driver = { 703 .coredump = mwifiex_usb_coredump, 704 }, 705 }; 706 707 static int mwifiex_write_data_sync(struct mwifiex_adapter *adapter, u8 *pbuf, 708 u32 *len, u8 ep, u32 timeout) 709 { 710 struct usb_card_rec *card = adapter->card; 711 int actual_length, ret; 712 713 if (!(*len % card->bulk_out_maxpktsize)) 714 (*len)++; 715 716 /* Send the data block */ 717 ret = usb_bulk_msg(card->udev, usb_sndbulkpipe(card->udev, ep), pbuf, 718 *len, &actual_length, timeout); 719 if (ret) { 720 mwifiex_dbg(adapter, ERROR, 721 "usb_bulk_msg for tx failed: %d\n", ret); 722 return ret; 723 } 724 725 *len = actual_length; 726 727 return ret; 728 } 729 730 static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *pbuf, 731 u32 *len, u8 ep, u32 timeout) 732 { 733 struct usb_card_rec *card = adapter->card; 734 int actual_length, ret; 735 736 /* Receive the data response */ 737 ret = usb_bulk_msg(card->udev, usb_rcvbulkpipe(card->udev, ep), pbuf, 738 *len, &actual_length, timeout); 739 if (ret) { 740 mwifiex_dbg(adapter, ERROR, 741 "usb_bulk_msg for rx failed: %d\n", ret); 742 return ret; 743 } 744 745 *len = actual_length; 746 747 return ret; 748 } 749 750 static void mwifiex_usb_port_resync(struct mwifiex_adapter *adapter) 751 { 752 struct usb_card_rec *card = adapter->card; 753 u8 active_port = MWIFIEX_USB_EP_DATA; 754 struct mwifiex_private *priv = NULL; 755 int i; 756 757 if (adapter->usb_mc_status) { 758 for (i = 0; i < adapter->priv_num; i++) { 759 priv = adapter->priv[i]; 760 if (!priv) 761 continue; 762 if ((priv->bss_role == MWIFIEX_BSS_ROLE_UAP && 763 !priv->bss_started) || 764 (priv->bss_role == MWIFIEX_BSS_ROLE_STA && 765 !priv->media_connected)) 766 priv->usb_port = MWIFIEX_USB_EP_DATA; 767 } 768 for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) 769 card->port[i].block_status = false; 770 } else { 771 for (i = 0; i < adapter->priv_num; i++) { 772 priv = adapter->priv[i]; 773 if (!priv) 774 continue; 775 if ((priv->bss_role == MWIFIEX_BSS_ROLE_UAP && 776 priv->bss_started) || 777 (priv->bss_role == MWIFIEX_BSS_ROLE_STA && 778 priv->media_connected)) { 779 active_port = priv->usb_port; 780 break; 781 } 782 } 783 for (i = 0; i < adapter->priv_num; i++) { 784 priv = adapter->priv[i]; 785 if (priv) 786 priv->usb_port = active_port; 787 } 788 for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { 789 if (active_port == card->port[i].tx_data_ep) 790 card->port[i].block_status = false; 791 else 792 card->port[i].block_status = true; 793 } 794 } 795 } 796 797 static bool mwifiex_usb_is_port_ready(struct mwifiex_private *priv) 798 { 799 struct usb_card_rec *card = priv->adapter->card; 800 int idx; 801 802 for (idx = 0; idx < MWIFIEX_TX_DATA_PORT; idx++) { 803 if (priv->usb_port == card->port[idx].tx_data_ep) 804 return !card->port[idx].block_status; 805 } 806 807 return false; 808 } 809 810 static inline u8 mwifiex_usb_data_sent(struct mwifiex_adapter *adapter) 811 { 812 struct usb_card_rec *card = adapter->card; 813 int i; 814 815 for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) 816 if (!card->port[i].block_status) 817 return false; 818 819 return true; 820 } 821 822 static int mwifiex_usb_construct_send_urb(struct mwifiex_adapter *adapter, 823 struct usb_tx_data_port *port, u8 ep, 824 struct urb_context *context, 825 struct sk_buff *skb_send) 826 { 827 struct usb_card_rec *card = adapter->card; 828 int ret = -EINPROGRESS; 829 struct urb *tx_urb; 830 831 context->adapter = adapter; 832 context->ep = ep; 833 context->skb = skb_send; 834 tx_urb = context->urb; 835 836 if (ep == card->tx_cmd_ep && 837 card->tx_cmd_ep_type == USB_ENDPOINT_XFER_INT) 838 usb_fill_int_urb(tx_urb, card->udev, 839 usb_sndintpipe(card->udev, ep), skb_send->data, 840 skb_send->len, mwifiex_usb_tx_complete, 841 (void *)context, card->tx_cmd_interval); 842 else 843 usb_fill_bulk_urb(tx_urb, card->udev, 844 usb_sndbulkpipe(card->udev, ep), 845 skb_send->data, skb_send->len, 846 mwifiex_usb_tx_complete, (void *)context); 847 848 tx_urb->transfer_flags |= URB_ZERO_PACKET; 849 850 if (ep == card->tx_cmd_ep) 851 atomic_inc(&card->tx_cmd_urb_pending); 852 else 853 atomic_inc(&port->tx_data_urb_pending); 854 855 if (ep != card->tx_cmd_ep && 856 atomic_read(&port->tx_data_urb_pending) == 857 MWIFIEX_TX_DATA_URB) { 858 port->block_status = true; 859 adapter->data_sent = mwifiex_usb_data_sent(adapter); 860 ret = -ENOSR; 861 } 862 863 if (usb_submit_urb(tx_urb, GFP_ATOMIC)) { 864 mwifiex_dbg(adapter, ERROR, 865 "%s: usb_submit_urb failed\n", __func__); 866 if (ep == card->tx_cmd_ep) { 867 atomic_dec(&card->tx_cmd_urb_pending); 868 } else { 869 atomic_dec(&port->tx_data_urb_pending); 870 port->block_status = false; 871 adapter->data_sent = false; 872 if (port->tx_data_ix) 873 port->tx_data_ix--; 874 else 875 port->tx_data_ix = MWIFIEX_TX_DATA_URB; 876 } 877 ret = -1; 878 } 879 880 return ret; 881 } 882 883 static int mwifiex_usb_prepare_tx_aggr_skb(struct mwifiex_adapter *adapter, 884 struct usb_tx_data_port *port, 885 struct sk_buff **skb_send) 886 { 887 struct sk_buff *skb_aggr, *skb_tmp; 888 u8 *payload, pad; 889 u16 align = adapter->bus_aggr.tx_aggr_align; 890 struct mwifiex_txinfo *tx_info = NULL; 891 bool is_txinfo_set = false; 892 893 /* Packets in aggr_list will be send in either skb_aggr or 894 * write complete, delete the tx_aggr timer 895 */ 896 if (port->tx_aggr.timer_cnxt.is_hold_timer_set) { 897 del_timer(&port->tx_aggr.timer_cnxt.hold_timer); 898 port->tx_aggr.timer_cnxt.is_hold_timer_set = false; 899 port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0; 900 } 901 902 skb_aggr = mwifiex_alloc_dma_align_buf(port->tx_aggr.aggr_len, 903 GFP_ATOMIC); 904 if (!skb_aggr) { 905 mwifiex_dbg(adapter, ERROR, 906 "%s: alloc skb_aggr failed\n", __func__); 907 908 while ((skb_tmp = skb_dequeue(&port->tx_aggr.aggr_list))) 909 mwifiex_write_data_complete(adapter, skb_tmp, 0, -1); 910 911 port->tx_aggr.aggr_num = 0; 912 port->tx_aggr.aggr_len = 0; 913 return -EBUSY; 914 } 915 916 tx_info = MWIFIEX_SKB_TXCB(skb_aggr); 917 memset(tx_info, 0, sizeof(*tx_info)); 918 919 while ((skb_tmp = skb_dequeue(&port->tx_aggr.aggr_list))) { 920 /* padding for aligning next packet header*/ 921 pad = (align - (skb_tmp->len & (align - 1))) % align; 922 payload = skb_put(skb_aggr, skb_tmp->len + pad); 923 memcpy(payload, skb_tmp->data, skb_tmp->len); 924 if (skb_queue_empty(&port->tx_aggr.aggr_list)) { 925 /* do not padding for last packet*/ 926 *(u16 *)payload = cpu_to_le16(skb_tmp->len); 927 *(u16 *)&payload[2] = 928 cpu_to_le16(MWIFIEX_TYPE_AGGR_DATA_V2 | 0x80); 929 skb_trim(skb_aggr, skb_aggr->len - pad); 930 } else { 931 /* add aggregation interface header */ 932 *(u16 *)payload = cpu_to_le16(skb_tmp->len + pad); 933 *(u16 *)&payload[2] = 934 cpu_to_le16(MWIFIEX_TYPE_AGGR_DATA_V2); 935 } 936 937 if (!is_txinfo_set) { 938 tx_info->bss_num = MWIFIEX_SKB_TXCB(skb_tmp)->bss_num; 939 tx_info->bss_type = MWIFIEX_SKB_TXCB(skb_tmp)->bss_type; 940 is_txinfo_set = true; 941 } 942 943 port->tx_aggr.aggr_num--; 944 port->tx_aggr.aggr_len -= (skb_tmp->len + pad); 945 mwifiex_write_data_complete(adapter, skb_tmp, 0, 0); 946 } 947 948 tx_info->pkt_len = skb_aggr->len - 949 (sizeof(struct txpd) + adapter->intf_hdr_len); 950 tx_info->flags |= MWIFIEX_BUF_FLAG_AGGR_PKT; 951 952 port->tx_aggr.aggr_num = 0; 953 port->tx_aggr.aggr_len = 0; 954 *skb_send = skb_aggr; 955 956 return 0; 957 } 958 959 /* This function prepare data packet to be send under usb tx aggregation 960 * protocol, check current usb aggregation status, link packet to aggrgation 961 * list if possible, work flow as below: 962 * (1) if only 1 packet available, add usb tx aggregation header and send. 963 * (2) if packet is able to aggregated, link it to current aggregation list. 964 * (3) if packet is not able to aggregated, aggregate and send exist packets 965 * in aggrgation list. Then, link packet in the list if there is more 966 * packet in transmit queue, otherwise try to transmit single packet. 967 */ 968 static int mwifiex_usb_aggr_tx_data(struct mwifiex_adapter *adapter, u8 ep, 969 struct sk_buff *skb, 970 struct mwifiex_tx_param *tx_param, 971 struct usb_tx_data_port *port) 972 { 973 u8 *payload, pad; 974 u16 align = adapter->bus_aggr.tx_aggr_align; 975 struct sk_buff *skb_send = NULL; 976 struct urb_context *context = NULL; 977 struct txpd *local_tx_pd = 978 (struct txpd *)((u8 *)skb->data + adapter->intf_hdr_len); 979 u8 f_send_aggr_buf = 0; 980 u8 f_send_cur_buf = 0; 981 u8 f_precopy_cur_buf = 0; 982 u8 f_postcopy_cur_buf = 0; 983 u32 timeout; 984 int ret; 985 986 /* padding to ensure each packet alginment */ 987 pad = (align - (skb->len & (align - 1))) % align; 988 989 if (tx_param && tx_param->next_pkt_len) { 990 /* next packet available in tx queue*/ 991 if (port->tx_aggr.aggr_len + skb->len + pad > 992 adapter->bus_aggr.tx_aggr_max_size) { 993 f_send_aggr_buf = 1; 994 f_postcopy_cur_buf = 1; 995 } else { 996 /* current packet could be aggregated*/ 997 f_precopy_cur_buf = 1; 998 999 if (port->tx_aggr.aggr_len + skb->len + pad + 1000 tx_param->next_pkt_len > 1001 adapter->bus_aggr.tx_aggr_max_size || 1002 port->tx_aggr.aggr_num + 2 > 1003 adapter->bus_aggr.tx_aggr_max_num) { 1004 /* next packet could not be aggregated 1005 * send current aggregation buffer 1006 */ 1007 f_send_aggr_buf = 1; 1008 } 1009 } 1010 } else { 1011 /* last packet in tx queue */ 1012 if (port->tx_aggr.aggr_num > 0) { 1013 /* pending packets in aggregation buffer*/ 1014 if (port->tx_aggr.aggr_len + skb->len + pad > 1015 adapter->bus_aggr.tx_aggr_max_size) { 1016 /* current packet not be able to aggregated, 1017 * send aggr buffer first, then send packet. 1018 */ 1019 f_send_cur_buf = 1; 1020 } else { 1021 /* last packet, Aggregation and send */ 1022 f_precopy_cur_buf = 1; 1023 } 1024 1025 f_send_aggr_buf = 1; 1026 } else { 1027 /* no pending packets in aggregation buffer, 1028 * send current packet immediately 1029 */ 1030 f_send_cur_buf = 1; 1031 } 1032 } 1033 1034 if (local_tx_pd->flags & MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET) { 1035 /* Send NULL packet immediately*/ 1036 if (f_precopy_cur_buf) { 1037 if (skb_queue_empty(&port->tx_aggr.aggr_list)) { 1038 f_precopy_cur_buf = 0; 1039 f_send_aggr_buf = 0; 1040 f_send_cur_buf = 1; 1041 } else { 1042 f_send_aggr_buf = 1; 1043 } 1044 } else if (f_postcopy_cur_buf) { 1045 f_send_cur_buf = 1; 1046 f_postcopy_cur_buf = 0; 1047 } 1048 } 1049 1050 if (f_precopy_cur_buf) { 1051 skb_queue_tail(&port->tx_aggr.aggr_list, skb); 1052 port->tx_aggr.aggr_len += (skb->len + pad); 1053 port->tx_aggr.aggr_num++; 1054 if (f_send_aggr_buf) 1055 goto send_aggr_buf; 1056 1057 /* packet will not been send immediately, 1058 * set a timer to make sure it will be sent under 1059 * strict time limit. Dynamically fit the timeout 1060 * value, according to packets number in aggr_list 1061 */ 1062 if (!port->tx_aggr.timer_cnxt.is_hold_timer_set) { 1063 port->tx_aggr.timer_cnxt.hold_tmo_msecs = 1064 MWIFIEX_USB_TX_AGGR_TMO_MIN; 1065 timeout = 1066 port->tx_aggr.timer_cnxt.hold_tmo_msecs; 1067 mod_timer(&port->tx_aggr.timer_cnxt.hold_timer, 1068 jiffies + msecs_to_jiffies(timeout)); 1069 port->tx_aggr.timer_cnxt.is_hold_timer_set = true; 1070 } else { 1071 if (port->tx_aggr.timer_cnxt.hold_tmo_msecs < 1072 MWIFIEX_USB_TX_AGGR_TMO_MAX) { 1073 /* Dyanmic fit timeout */ 1074 timeout = 1075 ++port->tx_aggr.timer_cnxt.hold_tmo_msecs; 1076 mod_timer(&port->tx_aggr.timer_cnxt.hold_timer, 1077 jiffies + msecs_to_jiffies(timeout)); 1078 } 1079 } 1080 } 1081 1082 send_aggr_buf: 1083 if (f_send_aggr_buf) { 1084 ret = mwifiex_usb_prepare_tx_aggr_skb(adapter, port, &skb_send); 1085 if (!ret) { 1086 context = &port->tx_data_list[port->tx_data_ix++]; 1087 ret = mwifiex_usb_construct_send_urb(adapter, port, ep, 1088 context, skb_send); 1089 if (ret == -1) 1090 mwifiex_write_data_complete(adapter, skb_send, 1091 0, -1); 1092 } 1093 } 1094 1095 if (f_send_cur_buf) { 1096 if (f_send_aggr_buf) { 1097 if (atomic_read(&port->tx_data_urb_pending) >= 1098 MWIFIEX_TX_DATA_URB) { 1099 port->block_status = true; 1100 adapter->data_sent = 1101 mwifiex_usb_data_sent(adapter); 1102 /* no available urb, postcopy packet*/ 1103 f_postcopy_cur_buf = 1; 1104 goto postcopy_cur_buf; 1105 } 1106 1107 if (port->tx_data_ix >= MWIFIEX_TX_DATA_URB) 1108 port->tx_data_ix = 0; 1109 } 1110 1111 payload = skb->data; 1112 *(u16 *)&payload[2] = 1113 cpu_to_le16(MWIFIEX_TYPE_AGGR_DATA_V2 | 0x80); 1114 *(u16 *)payload = cpu_to_le16(skb->len); 1115 skb_send = skb; 1116 context = &port->tx_data_list[port->tx_data_ix++]; 1117 return mwifiex_usb_construct_send_urb(adapter, port, ep, 1118 context, skb_send); 1119 } 1120 1121 postcopy_cur_buf: 1122 if (f_postcopy_cur_buf) { 1123 skb_queue_tail(&port->tx_aggr.aggr_list, skb); 1124 port->tx_aggr.aggr_len += (skb->len + pad); 1125 port->tx_aggr.aggr_num++; 1126 /* New aggregation begin, start timer */ 1127 if (!port->tx_aggr.timer_cnxt.is_hold_timer_set) { 1128 port->tx_aggr.timer_cnxt.hold_tmo_msecs = 1129 MWIFIEX_USB_TX_AGGR_TMO_MIN; 1130 timeout = port->tx_aggr.timer_cnxt.hold_tmo_msecs; 1131 mod_timer(&port->tx_aggr.timer_cnxt.hold_timer, 1132 jiffies + msecs_to_jiffies(timeout)); 1133 port->tx_aggr.timer_cnxt.is_hold_timer_set = true; 1134 } 1135 } 1136 1137 return -EINPROGRESS; 1138 } 1139 1140 static void mwifiex_usb_tx_aggr_tmo(struct timer_list *t) 1141 { 1142 struct urb_context *urb_cnxt = NULL; 1143 struct sk_buff *skb_send = NULL; 1144 struct tx_aggr_tmr_cnxt *timer_context = 1145 from_timer(timer_context, t, hold_timer); 1146 struct mwifiex_adapter *adapter = timer_context->adapter; 1147 struct usb_tx_data_port *port = timer_context->port; 1148 int err = 0; 1149 1150 spin_lock_bh(&port->tx_aggr_lock); 1151 err = mwifiex_usb_prepare_tx_aggr_skb(adapter, port, &skb_send); 1152 if (err) { 1153 mwifiex_dbg(adapter, ERROR, 1154 "prepare tx aggr skb failed, err=%d\n", err); 1155 goto unlock; 1156 } 1157 1158 if (atomic_read(&port->tx_data_urb_pending) >= 1159 MWIFIEX_TX_DATA_URB) { 1160 port->block_status = true; 1161 adapter->data_sent = 1162 mwifiex_usb_data_sent(adapter); 1163 err = -1; 1164 goto done; 1165 } 1166 1167 if (port->tx_data_ix >= MWIFIEX_TX_DATA_URB) 1168 port->tx_data_ix = 0; 1169 1170 urb_cnxt = &port->tx_data_list[port->tx_data_ix++]; 1171 err = mwifiex_usb_construct_send_urb(adapter, port, port->tx_data_ep, 1172 urb_cnxt, skb_send); 1173 done: 1174 if (err == -1) 1175 mwifiex_write_data_complete(adapter, skb_send, 0, -1); 1176 unlock: 1177 spin_unlock_bh(&port->tx_aggr_lock); 1178 } 1179 1180 /* This function write a command/data packet to card. */ 1181 static int mwifiex_usb_host_to_card(struct mwifiex_adapter *adapter, u8 ep, 1182 struct sk_buff *skb, 1183 struct mwifiex_tx_param *tx_param) 1184 { 1185 struct usb_card_rec *card = adapter->card; 1186 struct urb_context *context = NULL; 1187 struct usb_tx_data_port *port = NULL; 1188 int idx, ret; 1189 1190 if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { 1191 mwifiex_dbg(adapter, ERROR, 1192 "%s: not allowed while suspended\n", __func__); 1193 return -1; 1194 } 1195 1196 if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags)) { 1197 mwifiex_dbg(adapter, ERROR, "%s: device removed\n", __func__); 1198 return -1; 1199 } 1200 1201 mwifiex_dbg(adapter, INFO, "%s: ep=%d\n", __func__, ep); 1202 1203 if (ep == card->tx_cmd_ep) { 1204 context = &card->tx_cmd; 1205 } else { 1206 /* get the data port structure for endpoint */ 1207 for (idx = 0; idx < MWIFIEX_TX_DATA_PORT; idx++) { 1208 if (ep == card->port[idx].tx_data_ep) { 1209 port = &card->port[idx]; 1210 if (atomic_read(&port->tx_data_urb_pending) 1211 >= MWIFIEX_TX_DATA_URB) { 1212 port->block_status = true; 1213 adapter->data_sent = 1214 mwifiex_usb_data_sent(adapter); 1215 return -EBUSY; 1216 } 1217 if (port->tx_data_ix >= MWIFIEX_TX_DATA_URB) 1218 port->tx_data_ix = 0; 1219 break; 1220 } 1221 } 1222 1223 if (!port) { 1224 mwifiex_dbg(adapter, ERROR, "Wrong usb tx data port\n"); 1225 return -1; 1226 } 1227 1228 if (adapter->bus_aggr.enable) { 1229 spin_lock_bh(&port->tx_aggr_lock); 1230 ret = mwifiex_usb_aggr_tx_data(adapter, ep, skb, 1231 tx_param, port); 1232 spin_unlock_bh(&port->tx_aggr_lock); 1233 return ret; 1234 } 1235 1236 context = &port->tx_data_list[port->tx_data_ix++]; 1237 } 1238 1239 return mwifiex_usb_construct_send_urb(adapter, port, ep, context, skb); 1240 } 1241 1242 static int mwifiex_usb_tx_init(struct mwifiex_adapter *adapter) 1243 { 1244 struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; 1245 struct usb_tx_data_port *port; 1246 int i, j; 1247 1248 card->tx_cmd.adapter = adapter; 1249 card->tx_cmd.ep = card->tx_cmd_ep; 1250 1251 card->tx_cmd.urb = usb_alloc_urb(0, GFP_KERNEL); 1252 if (!card->tx_cmd.urb) 1253 return -ENOMEM; 1254 1255 for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { 1256 port = &card->port[i]; 1257 if (!port->tx_data_ep) 1258 continue; 1259 port->tx_data_ix = 0; 1260 skb_queue_head_init(&port->tx_aggr.aggr_list); 1261 if (port->tx_data_ep == MWIFIEX_USB_EP_DATA) 1262 port->block_status = false; 1263 else 1264 port->block_status = true; 1265 for (j = 0; j < MWIFIEX_TX_DATA_URB; j++) { 1266 port->tx_data_list[j].adapter = adapter; 1267 port->tx_data_list[j].ep = port->tx_data_ep; 1268 port->tx_data_list[j].urb = 1269 usb_alloc_urb(0, GFP_KERNEL); 1270 if (!port->tx_data_list[j].urb) 1271 return -ENOMEM; 1272 } 1273 1274 port->tx_aggr.timer_cnxt.adapter = adapter; 1275 port->tx_aggr.timer_cnxt.port = port; 1276 port->tx_aggr.timer_cnxt.is_hold_timer_set = false; 1277 port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0; 1278 timer_setup(&port->tx_aggr.timer_cnxt.hold_timer, 1279 mwifiex_usb_tx_aggr_tmo, 0); 1280 } 1281 1282 return 0; 1283 } 1284 1285 static int mwifiex_usb_rx_init(struct mwifiex_adapter *adapter) 1286 { 1287 struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; 1288 int i; 1289 1290 card->rx_cmd.adapter = adapter; 1291 card->rx_cmd.ep = card->rx_cmd_ep; 1292 1293 card->rx_cmd.urb = usb_alloc_urb(0, GFP_KERNEL); 1294 if (!card->rx_cmd.urb) 1295 return -ENOMEM; 1296 1297 card->rx_cmd.skb = dev_alloc_skb(MWIFIEX_RX_CMD_BUF_SIZE); 1298 if (!card->rx_cmd.skb) 1299 return -ENOMEM; 1300 1301 if (mwifiex_usb_submit_rx_urb(&card->rx_cmd, MWIFIEX_RX_CMD_BUF_SIZE)) 1302 return -1; 1303 1304 for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) { 1305 card->rx_data_list[i].adapter = adapter; 1306 card->rx_data_list[i].ep = card->rx_data_ep; 1307 1308 card->rx_data_list[i].urb = usb_alloc_urb(0, GFP_KERNEL); 1309 if (!card->rx_data_list[i].urb) 1310 return -1; 1311 if (mwifiex_usb_submit_rx_urb(&card->rx_data_list[i], 1312 MWIFIEX_RX_DATA_BUF_SIZE)) 1313 return -1; 1314 } 1315 1316 return 0; 1317 } 1318 1319 /* This function register usb device and initialize parameter. */ 1320 static int mwifiex_register_dev(struct mwifiex_adapter *adapter) 1321 { 1322 struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; 1323 1324 card->adapter = adapter; 1325 1326 switch (le16_to_cpu(card->udev->descriptor.idProduct)) { 1327 case USB8997_PID_1: 1328 case USB8997_PID_2: 1329 adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K; 1330 strcpy(adapter->fw_name, USB8997_DEFAULT_FW_NAME); 1331 adapter->ext_scan = true; 1332 break; 1333 case USB8766_PID_1: 1334 case USB8766_PID_2: 1335 adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; 1336 strcpy(adapter->fw_name, USB8766_DEFAULT_FW_NAME); 1337 adapter->ext_scan = true; 1338 break; 1339 case USB8801_PID_1: 1340 case USB8801_PID_2: 1341 adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; 1342 strcpy(adapter->fw_name, USB8801_DEFAULT_FW_NAME); 1343 adapter->ext_scan = false; 1344 break; 1345 case USB8797_PID_1: 1346 case USB8797_PID_2: 1347 default: 1348 adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; 1349 strcpy(adapter->fw_name, USB8797_DEFAULT_FW_NAME); 1350 break; 1351 } 1352 1353 adapter->usb_mc_status = false; 1354 adapter->usb_mc_setup = false; 1355 1356 return 0; 1357 } 1358 1359 static void mwifiex_usb_cleanup_tx_aggr(struct mwifiex_adapter *adapter) 1360 { 1361 struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; 1362 struct usb_tx_data_port *port; 1363 struct sk_buff *skb_tmp; 1364 int idx; 1365 1366 for (idx = 0; idx < MWIFIEX_TX_DATA_PORT; idx++) { 1367 port = &card->port[idx]; 1368 if (adapter->bus_aggr.enable) 1369 while ((skb_tmp = 1370 skb_dequeue(&port->tx_aggr.aggr_list))) 1371 mwifiex_write_data_complete(adapter, skb_tmp, 1372 0, -1); 1373 if (port->tx_aggr.timer_cnxt.hold_timer.function) 1374 del_timer_sync(&port->tx_aggr.timer_cnxt.hold_timer); 1375 port->tx_aggr.timer_cnxt.is_hold_timer_set = false; 1376 port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0; 1377 } 1378 } 1379 1380 static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) 1381 { 1382 struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; 1383 1384 mwifiex_usb_free(card); 1385 1386 mwifiex_usb_cleanup_tx_aggr(adapter); 1387 1388 card->adapter = NULL; 1389 } 1390 1391 static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, 1392 struct mwifiex_fw_image *fw) 1393 { 1394 int ret = 0; 1395 u8 *firmware = fw->fw_buf, *recv_buff; 1396 u32 retries = USB8XXX_FW_MAX_RETRY + 1; 1397 u32 dlen; 1398 u32 fw_seqnum = 0, tlen = 0, dnld_cmd = 0; 1399 struct fw_data *fwdata; 1400 struct fw_sync_header sync_fw; 1401 u8 check_winner = 1; 1402 1403 if (!firmware) { 1404 mwifiex_dbg(adapter, ERROR, 1405 "No firmware image found! Terminating download\n"); 1406 ret = -1; 1407 goto fw_exit; 1408 } 1409 1410 /* Allocate memory for transmit */ 1411 fwdata = kzalloc(FW_DNLD_TX_BUF_SIZE, GFP_KERNEL); 1412 if (!fwdata) { 1413 ret = -ENOMEM; 1414 goto fw_exit; 1415 } 1416 1417 /* Allocate memory for receive */ 1418 recv_buff = kzalloc(FW_DNLD_RX_BUF_SIZE, GFP_KERNEL); 1419 if (!recv_buff) { 1420 ret = -ENOMEM; 1421 goto cleanup; 1422 } 1423 1424 do { 1425 /* Send pseudo data to check winner status first */ 1426 if (check_winner) { 1427 memset(&fwdata->fw_hdr, 0, sizeof(struct fw_header)); 1428 dlen = 0; 1429 } else { 1430 /* copy the header of the fw_data to get the length */ 1431 memcpy(&fwdata->fw_hdr, &firmware[tlen], 1432 sizeof(struct fw_header)); 1433 1434 dlen = le32_to_cpu(fwdata->fw_hdr.data_len); 1435 dnld_cmd = le32_to_cpu(fwdata->fw_hdr.dnld_cmd); 1436 tlen += sizeof(struct fw_header); 1437 1438 /* Command 7 doesn't have data length field */ 1439 if (dnld_cmd == FW_CMD_7) 1440 dlen = 0; 1441 1442 memcpy(fwdata->data, &firmware[tlen], dlen); 1443 1444 fwdata->seq_num = cpu_to_le32(fw_seqnum); 1445 tlen += dlen; 1446 } 1447 1448 /* If the send/receive fails or CRC occurs then retry */ 1449 while (--retries) { 1450 u8 *buf = (u8 *)fwdata; 1451 u32 len = FW_DATA_XMIT_SIZE; 1452 1453 /* send the firmware block */ 1454 ret = mwifiex_write_data_sync(adapter, buf, &len, 1455 MWIFIEX_USB_EP_CMD_EVENT, 1456 MWIFIEX_USB_TIMEOUT); 1457 if (ret) { 1458 mwifiex_dbg(adapter, ERROR, 1459 "write_data_sync: failed: %d\n", 1460 ret); 1461 continue; 1462 } 1463 1464 buf = recv_buff; 1465 len = FW_DNLD_RX_BUF_SIZE; 1466 1467 /* Receive the firmware block response */ 1468 ret = mwifiex_read_data_sync(adapter, buf, &len, 1469 MWIFIEX_USB_EP_CMD_EVENT, 1470 MWIFIEX_USB_TIMEOUT); 1471 if (ret) { 1472 mwifiex_dbg(adapter, ERROR, 1473 "read_data_sync: failed: %d\n", 1474 ret); 1475 continue; 1476 } 1477 1478 memcpy(&sync_fw, recv_buff, 1479 sizeof(struct fw_sync_header)); 1480 1481 /* check 1st firmware block resp for highest bit set */ 1482 if (check_winner) { 1483 if (le32_to_cpu(sync_fw.cmd) & 0x80000000) { 1484 mwifiex_dbg(adapter, WARN, 1485 "USB is not the winner %#x\n", 1486 sync_fw.cmd); 1487 1488 /* returning success */ 1489 ret = 0; 1490 goto cleanup; 1491 } 1492 1493 mwifiex_dbg(adapter, MSG, 1494 "start to download FW...\n"); 1495 1496 check_winner = 0; 1497 break; 1498 } 1499 1500 /* check the firmware block response for CRC errors */ 1501 if (sync_fw.cmd) { 1502 mwifiex_dbg(adapter, ERROR, 1503 "FW received block with CRC %#x\n", 1504 sync_fw.cmd); 1505 ret = -1; 1506 continue; 1507 } 1508 1509 retries = USB8XXX_FW_MAX_RETRY + 1; 1510 break; 1511 } 1512 fw_seqnum++; 1513 } while ((dnld_cmd != FW_HAS_LAST_BLOCK) && retries); 1514 1515 cleanup: 1516 mwifiex_dbg(adapter, MSG, 1517 "info: FW download over, size %d bytes\n", tlen); 1518 1519 kfree(recv_buff); 1520 kfree(fwdata); 1521 1522 if (retries) 1523 ret = 0; 1524 fw_exit: 1525 return ret; 1526 } 1527 1528 static int mwifiex_usb_dnld_fw(struct mwifiex_adapter *adapter, 1529 struct mwifiex_fw_image *fw) 1530 { 1531 int ret; 1532 struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; 1533 1534 if (card->usb_boot_state == USB8XXX_FW_DNLD) { 1535 ret = mwifiex_prog_fw_w_helper(adapter, fw); 1536 if (ret) 1537 return -1; 1538 1539 /* Boot state changes after successful firmware download */ 1540 if (card->usb_boot_state == USB8XXX_FW_DNLD) 1541 return -1; 1542 } 1543 1544 ret = mwifiex_usb_rx_init(adapter); 1545 if (!ret) 1546 ret = mwifiex_usb_tx_init(adapter); 1547 1548 return ret; 1549 } 1550 1551 static void mwifiex_submit_rx_urb(struct mwifiex_adapter *adapter, u8 ep) 1552 { 1553 struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; 1554 1555 skb_push(card->rx_cmd.skb, INTF_HEADER_LEN); 1556 if ((ep == card->rx_cmd_ep) && 1557 (!atomic_read(&card->rx_cmd_urb_pending))) 1558 mwifiex_usb_submit_rx_urb(&card->rx_cmd, 1559 MWIFIEX_RX_CMD_BUF_SIZE); 1560 1561 return; 1562 } 1563 1564 static int mwifiex_usb_cmd_event_complete(struct mwifiex_adapter *adapter, 1565 struct sk_buff *skb) 1566 { 1567 mwifiex_submit_rx_urb(adapter, MWIFIEX_USB_EP_CMD_EVENT); 1568 1569 return 0; 1570 } 1571 1572 /* This function wakes up the card. */ 1573 static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter) 1574 { 1575 /* Simulation of HS_AWAKE event */ 1576 adapter->pm_wakeup_fw_try = false; 1577 del_timer(&adapter->wakeup_timer); 1578 adapter->pm_wakeup_card_req = false; 1579 adapter->ps_state = PS_STATE_AWAKE; 1580 1581 return 0; 1582 } 1583 1584 static void mwifiex_usb_submit_rem_rx_urbs(struct mwifiex_adapter *adapter) 1585 { 1586 struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; 1587 int i; 1588 struct urb_context *ctx; 1589 1590 for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) { 1591 if (card->rx_data_list[i].skb) 1592 continue; 1593 ctx = &card->rx_data_list[i]; 1594 mwifiex_usb_submit_rx_urb(ctx, MWIFIEX_RX_DATA_BUF_SIZE); 1595 } 1596 } 1597 1598 /* This function is called after the card has woken up. */ 1599 static inline int 1600 mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter) 1601 { 1602 return 0; 1603 } 1604 1605 static struct mwifiex_if_ops usb_ops = { 1606 .register_dev = mwifiex_register_dev, 1607 .unregister_dev = mwifiex_unregister_dev, 1608 .wakeup = mwifiex_pm_wakeup_card, 1609 .wakeup_complete = mwifiex_pm_wakeup_card_complete, 1610 1611 /* USB specific */ 1612 .dnld_fw = mwifiex_usb_dnld_fw, 1613 .cmdrsp_complete = mwifiex_usb_cmd_event_complete, 1614 .event_complete = mwifiex_usb_cmd_event_complete, 1615 .host_to_card = mwifiex_usb_host_to_card, 1616 .submit_rem_rx_urbs = mwifiex_usb_submit_rem_rx_urbs, 1617 .multi_port_resync = mwifiex_usb_port_resync, 1618 .is_port_ready = mwifiex_usb_is_port_ready, 1619 }; 1620 1621 module_usb_driver(mwifiex_usb_driver); 1622 1623 MODULE_AUTHOR("Marvell International Ltd."); 1624 MODULE_DESCRIPTION("Marvell WiFi-Ex USB Driver version" USB_VERSION); 1625 MODULE_VERSION(USB_VERSION); 1626 MODULE_LICENSE("GPL v2"); 1627 MODULE_FIRMWARE(USB8766_DEFAULT_FW_NAME); 1628 MODULE_FIRMWARE(USB8797_DEFAULT_FW_NAME); 1629 MODULE_FIRMWARE(USB8801_DEFAULT_FW_NAME); 1630 MODULE_FIRMWARE(USB8997_DEFAULT_FW_NAME); 1631