1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de> 4 * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> 5 * 6 * This driver is a port from stlc45xx: 7 * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). 8 */ 9 10 #include <linux/module.h> 11 #include <linux/platform_device.h> 12 #include <linux/interrupt.h> 13 #include <linux/firmware.h> 14 #include <linux/delay.h> 15 #include <linux/irq.h> 16 #include <linux/spi/spi.h> 17 #include <linux/etherdevice.h> 18 #include <linux/gpio.h> 19 #include <linux/slab.h> 20 21 #include "p54spi.h" 22 #include "p54.h" 23 24 #include "lmac.h" 25 26 #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM 27 #include "p54spi_eeprom.h" 28 #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ 29 30 MODULE_FIRMWARE("3826.arm"); 31 MODULE_FIRMWARE("3826.eeprom"); 32 33 /* gpios should be handled in board files and provided via platform data, 34 * but because it's currently impossible for p54spi to have a header file 35 * in include/linux, let's use module paramaters for now 36 */ 37 38 static int p54spi_gpio_power = 97; 39 module_param(p54spi_gpio_power, int, 0444); 40 MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line"); 41 42 static int p54spi_gpio_irq = 87; 43 module_param(p54spi_gpio_irq, int, 0444); 44 MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line"); 45 46 static void p54spi_spi_read(struct p54s_priv *priv, u8 address, 47 void *buf, size_t len) 48 { 49 struct spi_transfer t[2]; 50 struct spi_message m; 51 __le16 addr; 52 53 /* We first push the address */ 54 addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15); 55 56 spi_message_init(&m); 57 memset(t, 0, sizeof(t)); 58 59 t[0].tx_buf = &addr; 60 t[0].len = sizeof(addr); 61 spi_message_add_tail(&t[0], &m); 62 63 t[1].rx_buf = buf; 64 t[1].len = len; 65 spi_message_add_tail(&t[1], &m); 66 67 spi_sync(priv->spi, &m); 68 } 69 70 71 static void p54spi_spi_write(struct p54s_priv *priv, u8 address, 72 const void *buf, size_t len) 73 { 74 struct spi_transfer t[3]; 75 struct spi_message m; 76 __le16 addr; 77 78 /* We first push the address */ 79 addr = cpu_to_le16(address << 8); 80 81 spi_message_init(&m); 82 memset(t, 0, sizeof(t)); 83 84 t[0].tx_buf = &addr; 85 t[0].len = sizeof(addr); 86 spi_message_add_tail(&t[0], &m); 87 88 t[1].tx_buf = buf; 89 t[1].len = len & ~1; 90 spi_message_add_tail(&t[1], &m); 91 92 if (len % 2) { 93 __le16 last_word; 94 last_word = cpu_to_le16(((u8 *)buf)[len - 1]); 95 96 t[2].tx_buf = &last_word; 97 t[2].len = sizeof(last_word); 98 spi_message_add_tail(&t[2], &m); 99 } 100 101 spi_sync(priv->spi, &m); 102 } 103 104 static u32 p54spi_read32(struct p54s_priv *priv, u8 addr) 105 { 106 __le32 val; 107 108 p54spi_spi_read(priv, addr, &val, sizeof(val)); 109 110 return le32_to_cpu(val); 111 } 112 113 static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val) 114 { 115 p54spi_spi_write(priv, addr, &val, sizeof(val)); 116 } 117 118 static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val) 119 { 120 p54spi_spi_write(priv, addr, &val, sizeof(val)); 121 } 122 123 static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits) 124 { 125 int i; 126 127 for (i = 0; i < 2000; i++) { 128 u32 buffer = p54spi_read32(priv, reg); 129 if ((buffer & bits) == bits) 130 return 1; 131 } 132 return 0; 133 } 134 135 static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base, 136 const void *buf, size_t len) 137 { 138 if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) { 139 dev_err(&priv->spi->dev, "spi_write_dma not allowed " 140 "to DMA write.\n"); 141 return -EAGAIN; 142 } 143 144 p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, 145 cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); 146 147 p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len)); 148 p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base); 149 p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len); 150 return 0; 151 } 152 153 static int p54spi_request_firmware(struct ieee80211_hw *dev) 154 { 155 struct p54s_priv *priv = dev->priv; 156 int ret; 157 158 /* FIXME: should driver use it's own struct device? */ 159 ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev); 160 161 if (ret < 0) { 162 dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret); 163 return ret; 164 } 165 166 ret = p54_parse_firmware(dev, priv->firmware); 167 if (ret) { 168 /* the firmware is released by the caller */ 169 return ret; 170 } 171 172 return 0; 173 } 174 175 static int p54spi_request_eeprom(struct ieee80211_hw *dev) 176 { 177 struct p54s_priv *priv = dev->priv; 178 const struct firmware *eeprom; 179 int ret; 180 181 /* allow users to customize their eeprom. 182 */ 183 184 ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev); 185 if (ret < 0) { 186 #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM 187 dev_info(&priv->spi->dev, "loading default eeprom...\n"); 188 ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom, 189 sizeof(p54spi_eeprom)); 190 #else 191 dev_err(&priv->spi->dev, "Failed to request user eeprom\n"); 192 #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ 193 } else { 194 dev_info(&priv->spi->dev, "loading user eeprom...\n"); 195 ret = p54_parse_eeprom(dev, (void *) eeprom->data, 196 (int)eeprom->size); 197 release_firmware(eeprom); 198 } 199 return ret; 200 } 201 202 static int p54spi_upload_firmware(struct ieee80211_hw *dev) 203 { 204 struct p54s_priv *priv = dev->priv; 205 unsigned long fw_len, _fw_len; 206 unsigned int offset = 0; 207 int err = 0; 208 u8 *fw; 209 210 fw_len = priv->firmware->size; 211 fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL); 212 if (!fw) 213 return -ENOMEM; 214 215 /* stop the device */ 216 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( 217 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | 218 SPI_CTRL_STAT_START_HALTED)); 219 220 msleep(TARGET_BOOT_SLEEP); 221 222 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( 223 SPI_CTRL_STAT_HOST_OVERRIDE | 224 SPI_CTRL_STAT_START_HALTED)); 225 226 msleep(TARGET_BOOT_SLEEP); 227 228 while (fw_len > 0) { 229 _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE); 230 231 err = p54spi_spi_write_dma(priv, cpu_to_le32( 232 ISL38XX_DEV_FIRMWARE_ADDR + offset), 233 (fw + offset), _fw_len); 234 if (err < 0) 235 goto out; 236 237 fw_len -= _fw_len; 238 offset += _fw_len; 239 } 240 241 BUG_ON(fw_len != 0); 242 243 /* enable host interrupts */ 244 p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, 245 cpu_to_le32(SPI_HOST_INTS_DEFAULT)); 246 247 /* boot the device */ 248 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( 249 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | 250 SPI_CTRL_STAT_RAM_BOOT)); 251 252 msleep(TARGET_BOOT_SLEEP); 253 254 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( 255 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT)); 256 msleep(TARGET_BOOT_SLEEP); 257 258 out: 259 kfree(fw); 260 return err; 261 } 262 263 static void p54spi_power_off(struct p54s_priv *priv) 264 { 265 disable_irq(gpio_to_irq(p54spi_gpio_irq)); 266 gpio_set_value(p54spi_gpio_power, 0); 267 } 268 269 static void p54spi_power_on(struct p54s_priv *priv) 270 { 271 gpio_set_value(p54spi_gpio_power, 1); 272 enable_irq(gpio_to_irq(p54spi_gpio_irq)); 273 274 /* need to wait a while before device can be accessed, the length 275 * is just a guess 276 */ 277 msleep(10); 278 } 279 280 static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val) 281 { 282 p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val)); 283 } 284 285 static int p54spi_wakeup(struct p54s_priv *priv) 286 { 287 /* wake the chip */ 288 p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, 289 cpu_to_le32(SPI_TARGET_INT_WAKEUP)); 290 291 /* And wait for the READY interrupt */ 292 if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, 293 SPI_HOST_INT_READY)) { 294 dev_err(&priv->spi->dev, "INT_READY timeout\n"); 295 return -EBUSY; 296 } 297 298 p54spi_int_ack(priv, SPI_HOST_INT_READY); 299 return 0; 300 } 301 302 static inline void p54spi_sleep(struct p54s_priv *priv) 303 { 304 p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, 305 cpu_to_le32(SPI_TARGET_INT_SLEEP)); 306 } 307 308 static void p54spi_int_ready(struct p54s_priv *priv) 309 { 310 p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32( 311 SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)); 312 313 switch (priv->fw_state) { 314 case FW_STATE_BOOTING: 315 priv->fw_state = FW_STATE_READY; 316 complete(&priv->fw_comp); 317 break; 318 case FW_STATE_RESETTING: 319 priv->fw_state = FW_STATE_READY; 320 /* TODO: reinitialize state */ 321 break; 322 default: 323 break; 324 } 325 } 326 327 static int p54spi_rx(struct p54s_priv *priv) 328 { 329 struct sk_buff *skb; 330 u16 len; 331 u16 rx_head[2]; 332 #define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16)) 333 334 if (p54spi_wakeup(priv) < 0) 335 return -EBUSY; 336 337 /* Read data size and first data word in one SPI transaction 338 * This is workaround for firmware/DMA bug, 339 * when first data word gets lost under high load. 340 */ 341 p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head)); 342 len = rx_head[0]; 343 344 if (len == 0) { 345 p54spi_sleep(priv); 346 dev_err(&priv->spi->dev, "rx request of zero bytes\n"); 347 return 0; 348 } 349 350 /* Firmware may insert up to 4 padding bytes after the lmac header, 351 * but it does not amend the size of SPI data transfer. 352 * Such packets has correct data size in header, thus referencing 353 * past the end of allocated skb. Reserve extra 4 bytes for this case 354 */ 355 skb = dev_alloc_skb(len + 4); 356 if (!skb) { 357 p54spi_sleep(priv); 358 dev_err(&priv->spi->dev, "could not alloc skb"); 359 return -ENOMEM; 360 } 361 362 if (len <= READAHEAD_SZ) { 363 skb_put_data(skb, rx_head + 1, len); 364 } else { 365 skb_put_data(skb, rx_head + 1, READAHEAD_SZ); 366 p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, 367 skb_put(skb, len - READAHEAD_SZ), 368 len - READAHEAD_SZ); 369 } 370 p54spi_sleep(priv); 371 /* Put additional bytes to compensate for the possible 372 * alignment-caused truncation 373 */ 374 skb_put(skb, 4); 375 376 if (p54_rx(priv->hw, skb) == 0) 377 dev_kfree_skb(skb); 378 379 return 0; 380 } 381 382 383 static irqreturn_t p54spi_interrupt(int irq, void *config) 384 { 385 struct spi_device *spi = config; 386 struct p54s_priv *priv = spi_get_drvdata(spi); 387 388 ieee80211_queue_work(priv->hw, &priv->work); 389 390 return IRQ_HANDLED; 391 } 392 393 static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) 394 { 395 struct p54_hdr *hdr = (struct p54_hdr *) skb->data; 396 int ret = 0; 397 398 if (p54spi_wakeup(priv) < 0) 399 return -EBUSY; 400 401 ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len); 402 if (ret < 0) 403 goto out; 404 405 if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, 406 SPI_HOST_INT_WR_READY)) { 407 dev_err(&priv->spi->dev, "WR_READY timeout\n"); 408 ret = -EAGAIN; 409 goto out; 410 } 411 412 p54spi_int_ack(priv, SPI_HOST_INT_WR_READY); 413 414 if (FREE_AFTER_TX(skb)) 415 p54_free_skb(priv->hw, skb); 416 out: 417 p54spi_sleep(priv); 418 return ret; 419 } 420 421 static int p54spi_wq_tx(struct p54s_priv *priv) 422 { 423 struct p54s_tx_info *entry; 424 struct sk_buff *skb; 425 struct ieee80211_tx_info *info; 426 struct p54_tx_info *minfo; 427 struct p54s_tx_info *dinfo; 428 unsigned long flags; 429 int ret = 0; 430 431 spin_lock_irqsave(&priv->tx_lock, flags); 432 433 while (!list_empty(&priv->tx_pending)) { 434 entry = list_entry(priv->tx_pending.next, 435 struct p54s_tx_info, tx_list); 436 437 list_del_init(&entry->tx_list); 438 439 spin_unlock_irqrestore(&priv->tx_lock, flags); 440 441 dinfo = container_of((void *) entry, struct p54s_tx_info, 442 tx_list); 443 minfo = container_of((void *) dinfo, struct p54_tx_info, 444 data); 445 info = container_of((void *) minfo, struct ieee80211_tx_info, 446 rate_driver_data); 447 skb = container_of((void *) info, struct sk_buff, cb); 448 449 ret = p54spi_tx_frame(priv, skb); 450 451 if (ret < 0) { 452 p54_free_skb(priv->hw, skb); 453 return ret; 454 } 455 456 spin_lock_irqsave(&priv->tx_lock, flags); 457 } 458 spin_unlock_irqrestore(&priv->tx_lock, flags); 459 return ret; 460 } 461 462 static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb) 463 { 464 struct p54s_priv *priv = dev->priv; 465 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); 466 struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data; 467 struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data; 468 unsigned long flags; 469 470 BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data))); 471 472 spin_lock_irqsave(&priv->tx_lock, flags); 473 list_add_tail(&di->tx_list, &priv->tx_pending); 474 spin_unlock_irqrestore(&priv->tx_lock, flags); 475 476 ieee80211_queue_work(priv->hw, &priv->work); 477 } 478 479 static void p54spi_work(struct work_struct *work) 480 { 481 struct p54s_priv *priv = container_of(work, struct p54s_priv, work); 482 u32 ints; 483 int ret; 484 485 mutex_lock(&priv->mutex); 486 487 if (priv->fw_state == FW_STATE_OFF) 488 goto out; 489 490 ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); 491 492 if (ints & SPI_HOST_INT_READY) { 493 p54spi_int_ready(priv); 494 p54spi_int_ack(priv, SPI_HOST_INT_READY); 495 } 496 497 if (priv->fw_state != FW_STATE_READY) 498 goto out; 499 500 if (ints & SPI_HOST_INT_UPDATE) { 501 p54spi_int_ack(priv, SPI_HOST_INT_UPDATE); 502 ret = p54spi_rx(priv); 503 if (ret < 0) 504 goto out; 505 } 506 if (ints & SPI_HOST_INT_SW_UPDATE) { 507 p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE); 508 ret = p54spi_rx(priv); 509 if (ret < 0) 510 goto out; 511 } 512 513 ret = p54spi_wq_tx(priv); 514 out: 515 mutex_unlock(&priv->mutex); 516 } 517 518 static int p54spi_op_start(struct ieee80211_hw *dev) 519 { 520 struct p54s_priv *priv = dev->priv; 521 unsigned long timeout; 522 int ret = 0; 523 524 if (mutex_lock_interruptible(&priv->mutex)) { 525 ret = -EINTR; 526 goto out; 527 } 528 529 priv->fw_state = FW_STATE_BOOTING; 530 531 p54spi_power_on(priv); 532 533 ret = p54spi_upload_firmware(dev); 534 if (ret < 0) { 535 p54spi_power_off(priv); 536 goto out_unlock; 537 } 538 539 mutex_unlock(&priv->mutex); 540 541 timeout = msecs_to_jiffies(2000); 542 timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp, 543 timeout); 544 if (!timeout) { 545 dev_err(&priv->spi->dev, "firmware boot failed"); 546 p54spi_power_off(priv); 547 ret = -1; 548 goto out; 549 } 550 551 if (mutex_lock_interruptible(&priv->mutex)) { 552 ret = -EINTR; 553 p54spi_power_off(priv); 554 goto out; 555 } 556 557 WARN_ON(priv->fw_state != FW_STATE_READY); 558 559 out_unlock: 560 mutex_unlock(&priv->mutex); 561 562 out: 563 return ret; 564 } 565 566 static void p54spi_op_stop(struct ieee80211_hw *dev) 567 { 568 struct p54s_priv *priv = dev->priv; 569 unsigned long flags; 570 571 mutex_lock(&priv->mutex); 572 WARN_ON(priv->fw_state != FW_STATE_READY); 573 574 p54spi_power_off(priv); 575 spin_lock_irqsave(&priv->tx_lock, flags); 576 INIT_LIST_HEAD(&priv->tx_pending); 577 spin_unlock_irqrestore(&priv->tx_lock, flags); 578 579 priv->fw_state = FW_STATE_OFF; 580 mutex_unlock(&priv->mutex); 581 582 cancel_work_sync(&priv->work); 583 } 584 585 static int p54spi_probe(struct spi_device *spi) 586 { 587 struct p54s_priv *priv = NULL; 588 struct ieee80211_hw *hw; 589 int ret = -EINVAL; 590 591 hw = p54_init_common(sizeof(*priv)); 592 if (!hw) { 593 dev_err(&spi->dev, "could not alloc ieee80211_hw"); 594 return -ENOMEM; 595 } 596 597 priv = hw->priv; 598 priv->hw = hw; 599 spi_set_drvdata(spi, priv); 600 priv->spi = spi; 601 602 spi->bits_per_word = 16; 603 spi->max_speed_hz = 24000000; 604 605 ret = spi_setup(spi); 606 if (ret < 0) { 607 dev_err(&priv->spi->dev, "spi_setup failed"); 608 goto err_free; 609 } 610 611 ret = gpio_request(p54spi_gpio_power, "p54spi power"); 612 if (ret < 0) { 613 dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret); 614 goto err_free; 615 } 616 617 ret = gpio_request(p54spi_gpio_irq, "p54spi irq"); 618 if (ret < 0) { 619 dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret); 620 goto err_free_gpio_power; 621 } 622 623 gpio_direction_output(p54spi_gpio_power, 0); 624 gpio_direction_input(p54spi_gpio_irq); 625 626 ret = request_irq(gpio_to_irq(p54spi_gpio_irq), 627 p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi", 628 priv->spi); 629 if (ret < 0) { 630 dev_err(&priv->spi->dev, "request_irq() failed"); 631 goto err_free_gpio_irq; 632 } 633 634 irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING); 635 636 INIT_WORK(&priv->work, p54spi_work); 637 init_completion(&priv->fw_comp); 638 INIT_LIST_HEAD(&priv->tx_pending); 639 mutex_init(&priv->mutex); 640 spin_lock_init(&priv->tx_lock); 641 SET_IEEE80211_DEV(hw, &spi->dev); 642 priv->common.open = p54spi_op_start; 643 priv->common.stop = p54spi_op_stop; 644 priv->common.tx = p54spi_op_tx; 645 646 ret = p54spi_request_firmware(hw); 647 if (ret < 0) 648 goto err_free_common; 649 650 ret = p54spi_request_eeprom(hw); 651 if (ret) 652 goto err_free_common; 653 654 ret = p54_register_common(hw, &priv->spi->dev); 655 if (ret) 656 goto err_free_common; 657 658 return 0; 659 660 err_free_common: 661 release_firmware(priv->firmware); 662 free_irq(gpio_to_irq(p54spi_gpio_irq), spi); 663 err_free_gpio_irq: 664 gpio_free(p54spi_gpio_irq); 665 err_free_gpio_power: 666 gpio_free(p54spi_gpio_power); 667 err_free: 668 p54_free_common(priv->hw); 669 return ret; 670 } 671 672 static void p54spi_remove(struct spi_device *spi) 673 { 674 struct p54s_priv *priv = spi_get_drvdata(spi); 675 676 p54_unregister_common(priv->hw); 677 678 free_irq(gpio_to_irq(p54spi_gpio_irq), spi); 679 680 gpio_free(p54spi_gpio_power); 681 gpio_free(p54spi_gpio_irq); 682 release_firmware(priv->firmware); 683 684 mutex_destroy(&priv->mutex); 685 686 p54_free_common(priv->hw); 687 } 688 689 690 static struct spi_driver p54spi_driver = { 691 .driver = { 692 .name = "p54spi", 693 }, 694 695 .probe = p54spi_probe, 696 .remove = p54spi_remove, 697 }; 698 699 module_spi_driver(p54spi_driver); 700 701 MODULE_LICENSE("GPL"); 702 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); 703 MODULE_ALIAS("spi:cx3110x"); 704 MODULE_ALIAS("spi:p54spi"); 705 MODULE_ALIAS("spi:stlc45xx"); 706