1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de> 4 * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> 5 * 6 * This driver is a port from stlc45xx: 7 * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). 8 */ 9 10 #include <linux/module.h> 11 #include <linux/platform_device.h> 12 #include <linux/interrupt.h> 13 #include <linux/firmware.h> 14 #include <linux/delay.h> 15 #include <linux/irq.h> 16 #include <linux/spi/spi.h> 17 #include <linux/etherdevice.h> 18 #include <linux/gpio.h> 19 #include <linux/slab.h> 20 21 #include "p54spi.h" 22 #include "p54.h" 23 24 #include "lmac.h" 25 26 #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM 27 #include "p54spi_eeprom.h" 28 #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ 29 30 MODULE_FIRMWARE("3826.arm"); 31 32 /* gpios should be handled in board files and provided via platform data, 33 * but because it's currently impossible for p54spi to have a header file 34 * in include/linux, let's use module paramaters for now 35 */ 36 37 static int p54spi_gpio_power = 97; 38 module_param(p54spi_gpio_power, int, 0444); 39 MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line"); 40 41 static int p54spi_gpio_irq = 87; 42 module_param(p54spi_gpio_irq, int, 0444); 43 MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line"); 44 45 static void p54spi_spi_read(struct p54s_priv *priv, u8 address, 46 void *buf, size_t len) 47 { 48 struct spi_transfer t[2]; 49 struct spi_message m; 50 __le16 addr; 51 52 /* We first push the address */ 53 addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15); 54 55 spi_message_init(&m); 56 memset(t, 0, sizeof(t)); 57 58 t[0].tx_buf = &addr; 59 t[0].len = sizeof(addr); 60 spi_message_add_tail(&t[0], &m); 61 62 t[1].rx_buf = buf; 63 t[1].len = len; 64 spi_message_add_tail(&t[1], &m); 65 66 spi_sync(priv->spi, &m); 67 } 68 69 70 static void p54spi_spi_write(struct p54s_priv *priv, u8 address, 71 const void *buf, size_t len) 72 { 73 struct spi_transfer t[3]; 74 struct spi_message m; 75 __le16 addr; 76 77 /* We first push the address */ 78 addr = cpu_to_le16(address << 8); 79 80 spi_message_init(&m); 81 memset(t, 0, sizeof(t)); 82 83 t[0].tx_buf = &addr; 84 t[0].len = sizeof(addr); 85 spi_message_add_tail(&t[0], &m); 86 87 t[1].tx_buf = buf; 88 t[1].len = len & ~1; 89 spi_message_add_tail(&t[1], &m); 90 91 if (len % 2) { 92 __le16 last_word; 93 last_word = cpu_to_le16(((u8 *)buf)[len - 1]); 94 95 t[2].tx_buf = &last_word; 96 t[2].len = sizeof(last_word); 97 spi_message_add_tail(&t[2], &m); 98 } 99 100 spi_sync(priv->spi, &m); 101 } 102 103 static u32 p54spi_read32(struct p54s_priv *priv, u8 addr) 104 { 105 __le32 val; 106 107 p54spi_spi_read(priv, addr, &val, sizeof(val)); 108 109 return le32_to_cpu(val); 110 } 111 112 static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val) 113 { 114 p54spi_spi_write(priv, addr, &val, sizeof(val)); 115 } 116 117 static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val) 118 { 119 p54spi_spi_write(priv, addr, &val, sizeof(val)); 120 } 121 122 static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits) 123 { 124 int i; 125 126 for (i = 0; i < 2000; i++) { 127 u32 buffer = p54spi_read32(priv, reg); 128 if ((buffer & bits) == bits) 129 return 1; 130 } 131 return 0; 132 } 133 134 static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base, 135 const void *buf, size_t len) 136 { 137 if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) { 138 dev_err(&priv->spi->dev, "spi_write_dma not allowed " 139 "to DMA write.\n"); 140 return -EAGAIN; 141 } 142 143 p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, 144 cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); 145 146 p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len)); 147 p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base); 148 p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len); 149 return 0; 150 } 151 152 static int p54spi_request_firmware(struct ieee80211_hw *dev) 153 { 154 struct p54s_priv *priv = dev->priv; 155 int ret; 156 157 /* FIXME: should driver use it's own struct device? */ 158 ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev); 159 160 if (ret < 0) { 161 dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret); 162 return ret; 163 } 164 165 ret = p54_parse_firmware(dev, priv->firmware); 166 if (ret) { 167 release_firmware(priv->firmware); 168 return ret; 169 } 170 171 return 0; 172 } 173 174 static int p54spi_request_eeprom(struct ieee80211_hw *dev) 175 { 176 struct p54s_priv *priv = dev->priv; 177 const struct firmware *eeprom; 178 int ret; 179 180 /* allow users to customize their eeprom. 181 */ 182 183 ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev); 184 if (ret < 0) { 185 #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM 186 dev_info(&priv->spi->dev, "loading default eeprom...\n"); 187 ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom, 188 sizeof(p54spi_eeprom)); 189 #else 190 dev_err(&priv->spi->dev, "Failed to request user eeprom\n"); 191 #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ 192 } else { 193 dev_info(&priv->spi->dev, "loading user eeprom...\n"); 194 ret = p54_parse_eeprom(dev, (void *) eeprom->data, 195 (int)eeprom->size); 196 release_firmware(eeprom); 197 } 198 return ret; 199 } 200 201 static int p54spi_upload_firmware(struct ieee80211_hw *dev) 202 { 203 struct p54s_priv *priv = dev->priv; 204 unsigned long fw_len, _fw_len; 205 unsigned int offset = 0; 206 int err = 0; 207 u8 *fw; 208 209 fw_len = priv->firmware->size; 210 fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL); 211 if (!fw) 212 return -ENOMEM; 213 214 /* stop the device */ 215 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( 216 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | 217 SPI_CTRL_STAT_START_HALTED)); 218 219 msleep(TARGET_BOOT_SLEEP); 220 221 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( 222 SPI_CTRL_STAT_HOST_OVERRIDE | 223 SPI_CTRL_STAT_START_HALTED)); 224 225 msleep(TARGET_BOOT_SLEEP); 226 227 while (fw_len > 0) { 228 _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE); 229 230 err = p54spi_spi_write_dma(priv, cpu_to_le32( 231 ISL38XX_DEV_FIRMWARE_ADDR + offset), 232 (fw + offset), _fw_len); 233 if (err < 0) 234 goto out; 235 236 fw_len -= _fw_len; 237 offset += _fw_len; 238 } 239 240 BUG_ON(fw_len != 0); 241 242 /* enable host interrupts */ 243 p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, 244 cpu_to_le32(SPI_HOST_INTS_DEFAULT)); 245 246 /* boot the device */ 247 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( 248 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | 249 SPI_CTRL_STAT_RAM_BOOT)); 250 251 msleep(TARGET_BOOT_SLEEP); 252 253 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( 254 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT)); 255 msleep(TARGET_BOOT_SLEEP); 256 257 out: 258 kfree(fw); 259 return err; 260 } 261 262 static void p54spi_power_off(struct p54s_priv *priv) 263 { 264 disable_irq(gpio_to_irq(p54spi_gpio_irq)); 265 gpio_set_value(p54spi_gpio_power, 0); 266 } 267 268 static void p54spi_power_on(struct p54s_priv *priv) 269 { 270 gpio_set_value(p54spi_gpio_power, 1); 271 enable_irq(gpio_to_irq(p54spi_gpio_irq)); 272 273 /* need to wait a while before device can be accessed, the length 274 * is just a guess 275 */ 276 msleep(10); 277 } 278 279 static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val) 280 { 281 p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val)); 282 } 283 284 static int p54spi_wakeup(struct p54s_priv *priv) 285 { 286 /* wake the chip */ 287 p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, 288 cpu_to_le32(SPI_TARGET_INT_WAKEUP)); 289 290 /* And wait for the READY interrupt */ 291 if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, 292 SPI_HOST_INT_READY)) { 293 dev_err(&priv->spi->dev, "INT_READY timeout\n"); 294 return -EBUSY; 295 } 296 297 p54spi_int_ack(priv, SPI_HOST_INT_READY); 298 return 0; 299 } 300 301 static inline void p54spi_sleep(struct p54s_priv *priv) 302 { 303 p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, 304 cpu_to_le32(SPI_TARGET_INT_SLEEP)); 305 } 306 307 static void p54spi_int_ready(struct p54s_priv *priv) 308 { 309 p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32( 310 SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)); 311 312 switch (priv->fw_state) { 313 case FW_STATE_BOOTING: 314 priv->fw_state = FW_STATE_READY; 315 complete(&priv->fw_comp); 316 break; 317 case FW_STATE_RESETTING: 318 priv->fw_state = FW_STATE_READY; 319 /* TODO: reinitialize state */ 320 break; 321 default: 322 break; 323 } 324 } 325 326 static int p54spi_rx(struct p54s_priv *priv) 327 { 328 struct sk_buff *skb; 329 u16 len; 330 u16 rx_head[2]; 331 #define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16)) 332 333 if (p54spi_wakeup(priv) < 0) 334 return -EBUSY; 335 336 /* Read data size and first data word in one SPI transaction 337 * This is workaround for firmware/DMA bug, 338 * when first data word gets lost under high load. 339 */ 340 p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head)); 341 len = rx_head[0]; 342 343 if (len == 0) { 344 p54spi_sleep(priv); 345 dev_err(&priv->spi->dev, "rx request of zero bytes\n"); 346 return 0; 347 } 348 349 /* Firmware may insert up to 4 padding bytes after the lmac header, 350 * but it does not amend the size of SPI data transfer. 351 * Such packets has correct data size in header, thus referencing 352 * past the end of allocated skb. Reserve extra 4 bytes for this case 353 */ 354 skb = dev_alloc_skb(len + 4); 355 if (!skb) { 356 p54spi_sleep(priv); 357 dev_err(&priv->spi->dev, "could not alloc skb"); 358 return -ENOMEM; 359 } 360 361 if (len <= READAHEAD_SZ) { 362 skb_put_data(skb, rx_head + 1, len); 363 } else { 364 skb_put_data(skb, rx_head + 1, READAHEAD_SZ); 365 p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, 366 skb_put(skb, len - READAHEAD_SZ), 367 len - READAHEAD_SZ); 368 } 369 p54spi_sleep(priv); 370 /* Put additional bytes to compensate for the possible 371 * alignment-caused truncation 372 */ 373 skb_put(skb, 4); 374 375 if (p54_rx(priv->hw, skb) == 0) 376 dev_kfree_skb(skb); 377 378 return 0; 379 } 380 381 382 static irqreturn_t p54spi_interrupt(int irq, void *config) 383 { 384 struct spi_device *spi = config; 385 struct p54s_priv *priv = spi_get_drvdata(spi); 386 387 ieee80211_queue_work(priv->hw, &priv->work); 388 389 return IRQ_HANDLED; 390 } 391 392 static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) 393 { 394 struct p54_hdr *hdr = (struct p54_hdr *) skb->data; 395 int ret = 0; 396 397 if (p54spi_wakeup(priv) < 0) 398 return -EBUSY; 399 400 ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len); 401 if (ret < 0) 402 goto out; 403 404 if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, 405 SPI_HOST_INT_WR_READY)) { 406 dev_err(&priv->spi->dev, "WR_READY timeout\n"); 407 ret = -EAGAIN; 408 goto out; 409 } 410 411 p54spi_int_ack(priv, SPI_HOST_INT_WR_READY); 412 413 if (FREE_AFTER_TX(skb)) 414 p54_free_skb(priv->hw, skb); 415 out: 416 p54spi_sleep(priv); 417 return ret; 418 } 419 420 static int p54spi_wq_tx(struct p54s_priv *priv) 421 { 422 struct p54s_tx_info *entry; 423 struct sk_buff *skb; 424 struct ieee80211_tx_info *info; 425 struct p54_tx_info *minfo; 426 struct p54s_tx_info *dinfo; 427 unsigned long flags; 428 int ret = 0; 429 430 spin_lock_irqsave(&priv->tx_lock, flags); 431 432 while (!list_empty(&priv->tx_pending)) { 433 entry = list_entry(priv->tx_pending.next, 434 struct p54s_tx_info, tx_list); 435 436 list_del_init(&entry->tx_list); 437 438 spin_unlock_irqrestore(&priv->tx_lock, flags); 439 440 dinfo = container_of((void *) entry, struct p54s_tx_info, 441 tx_list); 442 minfo = container_of((void *) dinfo, struct p54_tx_info, 443 data); 444 info = container_of((void *) minfo, struct ieee80211_tx_info, 445 rate_driver_data); 446 skb = container_of((void *) info, struct sk_buff, cb); 447 448 ret = p54spi_tx_frame(priv, skb); 449 450 if (ret < 0) { 451 p54_free_skb(priv->hw, skb); 452 return ret; 453 } 454 455 spin_lock_irqsave(&priv->tx_lock, flags); 456 } 457 spin_unlock_irqrestore(&priv->tx_lock, flags); 458 return ret; 459 } 460 461 static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb) 462 { 463 struct p54s_priv *priv = dev->priv; 464 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); 465 struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data; 466 struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data; 467 unsigned long flags; 468 469 BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data))); 470 471 spin_lock_irqsave(&priv->tx_lock, flags); 472 list_add_tail(&di->tx_list, &priv->tx_pending); 473 spin_unlock_irqrestore(&priv->tx_lock, flags); 474 475 ieee80211_queue_work(priv->hw, &priv->work); 476 } 477 478 static void p54spi_work(struct work_struct *work) 479 { 480 struct p54s_priv *priv = container_of(work, struct p54s_priv, work); 481 u32 ints; 482 int ret; 483 484 mutex_lock(&priv->mutex); 485 486 if (priv->fw_state == FW_STATE_OFF) 487 goto out; 488 489 ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); 490 491 if (ints & SPI_HOST_INT_READY) { 492 p54spi_int_ready(priv); 493 p54spi_int_ack(priv, SPI_HOST_INT_READY); 494 } 495 496 if (priv->fw_state != FW_STATE_READY) 497 goto out; 498 499 if (ints & SPI_HOST_INT_UPDATE) { 500 p54spi_int_ack(priv, SPI_HOST_INT_UPDATE); 501 ret = p54spi_rx(priv); 502 if (ret < 0) 503 goto out; 504 } 505 if (ints & SPI_HOST_INT_SW_UPDATE) { 506 p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE); 507 ret = p54spi_rx(priv); 508 if (ret < 0) 509 goto out; 510 } 511 512 ret = p54spi_wq_tx(priv); 513 out: 514 mutex_unlock(&priv->mutex); 515 } 516 517 static int p54spi_op_start(struct ieee80211_hw *dev) 518 { 519 struct p54s_priv *priv = dev->priv; 520 unsigned long timeout; 521 int ret = 0; 522 523 if (mutex_lock_interruptible(&priv->mutex)) { 524 ret = -EINTR; 525 goto out; 526 } 527 528 priv->fw_state = FW_STATE_BOOTING; 529 530 p54spi_power_on(priv); 531 532 ret = p54spi_upload_firmware(dev); 533 if (ret < 0) { 534 p54spi_power_off(priv); 535 goto out_unlock; 536 } 537 538 mutex_unlock(&priv->mutex); 539 540 timeout = msecs_to_jiffies(2000); 541 timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp, 542 timeout); 543 if (!timeout) { 544 dev_err(&priv->spi->dev, "firmware boot failed"); 545 p54spi_power_off(priv); 546 ret = -1; 547 goto out; 548 } 549 550 if (mutex_lock_interruptible(&priv->mutex)) { 551 ret = -EINTR; 552 p54spi_power_off(priv); 553 goto out; 554 } 555 556 WARN_ON(priv->fw_state != FW_STATE_READY); 557 558 out_unlock: 559 mutex_unlock(&priv->mutex); 560 561 out: 562 return ret; 563 } 564 565 static void p54spi_op_stop(struct ieee80211_hw *dev) 566 { 567 struct p54s_priv *priv = dev->priv; 568 unsigned long flags; 569 570 mutex_lock(&priv->mutex); 571 WARN_ON(priv->fw_state != FW_STATE_READY); 572 573 p54spi_power_off(priv); 574 spin_lock_irqsave(&priv->tx_lock, flags); 575 INIT_LIST_HEAD(&priv->tx_pending); 576 spin_unlock_irqrestore(&priv->tx_lock, flags); 577 578 priv->fw_state = FW_STATE_OFF; 579 mutex_unlock(&priv->mutex); 580 581 cancel_work_sync(&priv->work); 582 } 583 584 static int p54spi_probe(struct spi_device *spi) 585 { 586 struct p54s_priv *priv = NULL; 587 struct ieee80211_hw *hw; 588 int ret = -EINVAL; 589 590 hw = p54_init_common(sizeof(*priv)); 591 if (!hw) { 592 dev_err(&spi->dev, "could not alloc ieee80211_hw"); 593 return -ENOMEM; 594 } 595 596 priv = hw->priv; 597 priv->hw = hw; 598 spi_set_drvdata(spi, priv); 599 priv->spi = spi; 600 601 spi->bits_per_word = 16; 602 spi->max_speed_hz = 24000000; 603 604 ret = spi_setup(spi); 605 if (ret < 0) { 606 dev_err(&priv->spi->dev, "spi_setup failed"); 607 goto err_free; 608 } 609 610 ret = gpio_request(p54spi_gpio_power, "p54spi power"); 611 if (ret < 0) { 612 dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret); 613 goto err_free; 614 } 615 616 ret = gpio_request(p54spi_gpio_irq, "p54spi irq"); 617 if (ret < 0) { 618 dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret); 619 goto err_free_gpio_power; 620 } 621 622 gpio_direction_output(p54spi_gpio_power, 0); 623 gpio_direction_input(p54spi_gpio_irq); 624 625 ret = request_irq(gpio_to_irq(p54spi_gpio_irq), 626 p54spi_interrupt, 0, "p54spi", 627 priv->spi); 628 if (ret < 0) { 629 dev_err(&priv->spi->dev, "request_irq() failed"); 630 goto err_free_gpio_irq; 631 } 632 633 irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING); 634 635 disable_irq(gpio_to_irq(p54spi_gpio_irq)); 636 637 INIT_WORK(&priv->work, p54spi_work); 638 init_completion(&priv->fw_comp); 639 INIT_LIST_HEAD(&priv->tx_pending); 640 mutex_init(&priv->mutex); 641 spin_lock_init(&priv->tx_lock); 642 SET_IEEE80211_DEV(hw, &spi->dev); 643 priv->common.open = p54spi_op_start; 644 priv->common.stop = p54spi_op_stop; 645 priv->common.tx = p54spi_op_tx; 646 647 ret = p54spi_request_firmware(hw); 648 if (ret < 0) 649 goto err_free_common; 650 651 ret = p54spi_request_eeprom(hw); 652 if (ret) 653 goto err_free_common; 654 655 ret = p54_register_common(hw, &priv->spi->dev); 656 if (ret) 657 goto err_free_common; 658 659 return 0; 660 661 err_free_common: 662 free_irq(gpio_to_irq(p54spi_gpio_irq), spi); 663 err_free_gpio_irq: 664 gpio_free(p54spi_gpio_irq); 665 err_free_gpio_power: 666 gpio_free(p54spi_gpio_power); 667 err_free: 668 p54_free_common(priv->hw); 669 return ret; 670 } 671 672 static void p54spi_remove(struct spi_device *spi) 673 { 674 struct p54s_priv *priv = spi_get_drvdata(spi); 675 676 p54_unregister_common(priv->hw); 677 678 free_irq(gpio_to_irq(p54spi_gpio_irq), spi); 679 680 gpio_free(p54spi_gpio_power); 681 gpio_free(p54spi_gpio_irq); 682 release_firmware(priv->firmware); 683 684 mutex_destroy(&priv->mutex); 685 686 p54_free_common(priv->hw); 687 } 688 689 690 static struct spi_driver p54spi_driver = { 691 .driver = { 692 .name = "p54spi", 693 }, 694 695 .probe = p54spi_probe, 696 .remove = p54spi_remove, 697 }; 698 699 module_spi_driver(p54spi_driver); 700 701 MODULE_LICENSE("GPL"); 702 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); 703 MODULE_ALIAS("spi:cx3110x"); 704 MODULE_ALIAS("spi:p54spi"); 705 MODULE_ALIAS("spi:stlc45xx"); 706