1# SPDX-License-Identifier: GPL-2.0-only
2config HERMES
3	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
4	depends on (PPC_PMAC || PCI || PCMCIA)
5	depends on CFG80211
6	select CFG80211_WEXT_EXPORT
7	select WIRELESS_EXT
8	select WEXT_SPY
9	select WEXT_PRIV
10	select FW_LOADER
11	select CRYPTO
12	select CRYPTO_MICHAEL_MIC
13	help
14	  A driver for 802.11b wireless cards based on the "Hermes" or
15	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
16	  majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
17	  - except for the Cisco/Aironet cards.  Cards supported include the
18	  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
19	  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
20	  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
21	  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
22	  IPW2011, and Symbol Spectrum24 High Rate amongst others.
23
24	  This option includes the guts of the driver, but in order to
25	  actually use a card you will also need to enable support for PCMCIA
26	  Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
27
28	  You will also very likely also need the Wireless Tools in order to
29	  configure your card and that /etc/pcmcia/wireless.opts works :
30	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
31
32config HERMES_PRISM
33	bool "Support Prism 2/2.5 chipset"
34	depends on HERMES
35	help
36
37	  Say Y to enable support for Prism 2 and 2.5 chipsets.  These
38	  chipsets are better handled by the hostap driver.  This driver
39	  would not support WPA or firmware download for Prism chipset.
40
41	  If you are not sure, say N.
42
43config HERMES_CACHE_FW_ON_INIT
44	bool "Cache Hermes firmware on driver initialisation"
45	depends on HERMES
46	default y
47	help
48	  Say Y to cache any firmware required by the Hermes drivers
49	  on startup.  The firmware will remain cached until the
50	  driver is unloaded.  The cache uses 64K of RAM.
51
52	  Otherwise load the firmware from userspace as required.  In
53	  this case the driver should be unloaded and restarted
54	  whenever the firmware is changed.
55
56	  If you are not sure, say Y.
57
58config APPLE_AIRPORT
59	tristate "Apple Airport support (built-in)"
60	depends on PPC_PMAC && HERMES
61	help
62	  Say Y here to support the Airport 802.11b wireless Ethernet hardware
63	  built into the Macintosh iBook and other recent PowerPC-based
64	  Macintosh machines. This is essentially a Lucent Orinoco card with
65	  a non-standard interface.
66
67	  This driver does not support the Airport Extreme (802.11b/g). Use
68	  the BCM43xx driver for Airport Extreme cards.
69
70config PLX_HERMES
71	tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
72	depends on PCI && HERMES
73	help
74	  Enable support for PCMCIA cards supported by the "Hermes" (aka
75	  orinoco) driver when used in PLX9052 based PCI adaptors.  These
76	  adaptors are not a full PCMCIA controller but act as a more limited
77	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
78	  802.11b PCMCIA cards can be used in desktop machines.  The Netgear
79	  MA301 is such an adaptor.
80
81config TMD_HERMES
82	tristate "Hermes in TMD7160 based PCI adaptor support"
83	depends on PCI && HERMES
84	help
85	  Enable support for PCMCIA cards supported by the "Hermes" (aka
86	  orinoco) driver when used in TMD7160 based PCI adaptors.  These
87	  adaptors are not a full PCMCIA controller but act as a more limited
88	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
89	  802.11b PCMCIA cards can be used in desktop machines.
90
91config NORTEL_HERMES
92	tristate "Nortel emobility PCI adaptor support"
93	depends on PCI && HERMES
94	help
95	  Enable support for PCMCIA cards supported by the "Hermes" (aka
96	  orinoco) driver when used in Nortel emobility PCI adaptors.  These
97	  adaptors are not full PCMCIA controllers, but act as a more limited
98	  PCI <-> PCMCIA bridge.
99
100config PCI_HERMES
101	tristate "Prism 2.5 PCI 802.11b adaptor support"
102	depends on PCI && HERMES && HERMES_PRISM
103	help
104	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on
105	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
106	  PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
107	  common.  Some of the built-in wireless adaptors in laptops are of
108	  this variety.
109
110config PCMCIA_HERMES
111	tristate "Hermes PCMCIA card support"
112	depends on PCMCIA && HERMES && HAS_IOPORT_MAP
113	help
114	  A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
115	  as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
116	  EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
117	  others).  It should also be usable on various Prism II based cards
118	  such as the Linksys, D-Link and Farallon Skyline.  It should also
119	  work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
120
121	  You will very likely need the Wireless Tools in order to
122	  configure your card and that /etc/pcmcia/wireless.opts works:
123	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
124
125config PCMCIA_SPECTRUM
126	tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
127	depends on PCMCIA && HERMES && HAS_IOPORT_MAP
128	help
129
130	  This is a driver for 802.11b cards using RAM-loadable Symbol
131	  firmware, such as Symbol Wireless Networker LA4100, CompactFlash
132	  cards by Socket Communications and Intel PRO/Wireless 2011B.
133
134	  This driver requires firmware download on startup.  Utilities
135	  for downloading Symbol firmware are available at
136	  <http://sourceforge.net/projects/orinoco/>
137
138config ORINOCO_USB
139	tristate "Agere Orinoco USB support"
140	depends on USB && HERMES
141	select FW_LOADER
142	help
143	  This driver is for USB versions of the Agere Orinoco card.
144