1 /****************************************************************************** 2 * 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * GPL LICENSE SUMMARY 7 * 8 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. 9 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 10 * Copyright (C) 2019 Intel Corporation 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of version 2 of the GNU General Public License as 14 * published by the Free Software Foundation. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 19 * General Public License for more details. 20 * 21 * The full GNU General Public License is included in this distribution 22 * in the file called COPYING. 23 * 24 * Contact Information: 25 * Intel Linux Wireless <linuxwifi@intel.com> 26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 27 * 28 * BSD LICENSE 29 * 30 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. 31 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 32 * Copyright (C) 2019 Intel Corporation 33 * All rights reserved. 34 * 35 * Redistribution and use in source and binary forms, with or without 36 * modification, are permitted provided that the following conditions 37 * are met: 38 * 39 * * Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * * Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in 43 * the documentation and/or other materials provided with the 44 * distribution. 45 * * Neither the name Intel Corporation nor the names of its 46 * contributors may be used to endorse or promote products derived 47 * from this software without specific prior written permission. 48 * 49 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 50 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 51 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 52 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 53 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 54 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 55 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 56 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 57 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 58 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 59 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 60 * 61 *****************************************************************************/ 62 63 #ifndef __time_event_h__ 64 #define __time_event_h__ 65 66 #include "fw-api.h" 67 68 #include "mvm.h" 69 70 /** 71 * DOC: Time Events - what is it? 72 * 73 * Time Events are a fw feature that allows the driver to control the presence 74 * of the device on the channel. Since the fw supports multiple channels 75 * concurrently, the fw may choose to jump to another channel at any time. 76 * In order to make sure that the fw is on a specific channel at a certain time 77 * and for a certain duration, the driver needs to issue a time event. 78 * 79 * The simplest example is for BSS association. The driver issues a time event, 80 * waits for it to start, and only then tells mac80211 that we can start the 81 * association. This way, we make sure that the association will be done 82 * smoothly and won't be interrupted by channel switch decided within the fw. 83 */ 84 85 /** 86 * DOC: The flow against the fw 87 * 88 * When the driver needs to make sure we are in a certain channel, at a certain 89 * time and for a certain duration, it sends a Time Event. The flow against the 90 * fw goes like this: 91 * 1) Driver sends a TIME_EVENT_CMD to the fw 92 * 2) Driver gets the response for that command. This response contains the 93 * Unique ID (UID) of the event. 94 * 3) The fw sends notification when the event starts. 95 * 96 * Of course the API provides various options that allow to cover parameters 97 * of the flow. 98 * What is the duration of the event? 99 * What is the start time of the event? 100 * Is there an end-time for the event? 101 * How much can the event be delayed? 102 * Can the event be split? 103 * If yes what is the maximal number of chunks? 104 * etc... 105 */ 106 107 /** 108 * DOC: Abstraction to the driver 109 * 110 * In order to simplify the use of time events to the rest of the driver, 111 * we abstract the use of time events. This component provides the functions 112 * needed by the driver. 113 */ 114 115 #define IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS 600 116 #define IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS 400 117 118 /** 119 * iwl_mvm_protect_session - start / extend the session protection. 120 * @mvm: the mvm component 121 * @vif: the virtual interface for which the session is issued 122 * @duration: the duration of the session in TU. 123 * @min_duration: will start a new session if the current session will end 124 * in less than min_duration. 125 * @max_delay: maximum delay before starting the time event (in TU) 126 * @wait_for_notif: true if it is required that a time event notification be 127 * waited for (that the time event has been scheduled before returning) 128 * 129 * This function can be used to start a session protection which means that the 130 * fw will stay on the channel for %duration_ms milliseconds. This function 131 * can block (sleep) until the session starts. This function can also be used 132 * to extend a currently running session. 133 * This function is meant to be used for BSS association for example, where we 134 * want to make sure that the fw stays on the channel during the association. 135 */ 136 void iwl_mvm_protect_session(struct iwl_mvm *mvm, 137 struct ieee80211_vif *vif, 138 u32 duration, u32 min_duration, 139 u32 max_delay, bool wait_for_notif); 140 141 /** 142 * iwl_mvm_stop_session_protection - cancel the session protection. 143 * @mvm: the mvm component 144 * @vif: the virtual interface for which the session is issued 145 * 146 * This functions cancels the session protection which is an act of good 147 * citizenship. If it is not needed any more it should be canceled because 148 * the other bindings wait for the medium during that time. 149 * This funtions doesn't sleep. 150 */ 151 void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm, 152 struct ieee80211_vif *vif); 153 154 /* 155 * iwl_mvm_rx_time_event_notif - handles %TIME_EVENT_NOTIFICATION. 156 */ 157 void iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm, 158 struct iwl_rx_cmd_buffer *rxb); 159 160 /** 161 * iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionality 162 * @mvm: the mvm component 163 * @vif: the virtual interface for which the roc is requested. It is assumed 164 * that the vif type is NL80211_IFTYPE_P2P_DEVICE 165 * @duration: the requested duration in millisecond for the fw to be on the 166 * channel that is bound to the vif. 167 * @type: the remain on channel request type 168 * 169 * This function can be used to issue a remain on channel session, 170 * which means that the fw will stay in the channel for the request %duration 171 * milliseconds. The function is async, meaning that it only issues the ROC 172 * request but does not wait for it to start. Once the FW is ready to serve the 173 * ROC request, it will issue a notification to the driver that it is on the 174 * requested channel. Once the FW completes the ROC request it will issue 175 * another notification to the driver. 176 */ 177 int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, 178 int duration, enum ieee80211_roc_type type); 179 180 /** 181 * iwl_mvm_stop_roc - stop remain on channel functionality 182 * @mvm: the mvm component 183 * @vif: the virtual interface for which the roc is stopped 184 * 185 * This function can be used to cancel an ongoing ROC session. 186 * The function is async, it will instruct the FW to stop serving the ROC 187 * session, but will not wait for the actual stopping of the session. 188 */ 189 void iwl_mvm_stop_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 190 191 /** 192 * iwl_mvm_remove_time_event - general function to clean up of time event 193 * @mvm: the mvm component 194 * @vif: the vif to which the time event belongs 195 * @te_data: the time event data that corresponds to that time event 196 * 197 * This function can be used to cancel a time event regardless its type. 198 * It is useful for cleaning up time events running before removing an 199 * interface. 200 */ 201 void iwl_mvm_remove_time_event(struct iwl_mvm *mvm, 202 struct iwl_mvm_vif *mvmvif, 203 struct iwl_mvm_time_event_data *te_data); 204 205 /** 206 * iwl_mvm_te_clear_data - remove time event from list 207 * @mvm: the mvm component 208 * @te_data: the time event data to remove 209 * 210 * This function is mostly internal, it is made available here only 211 * for firmware restart purposes. 212 */ 213 void iwl_mvm_te_clear_data(struct iwl_mvm *mvm, 214 struct iwl_mvm_time_event_data *te_data); 215 216 void iwl_mvm_cleanup_roc_te(struct iwl_mvm *mvm); 217 void iwl_mvm_roc_done_wk(struct work_struct *wk); 218 219 /** 220 * iwl_mvm_schedule_csa_period - request channel switch absence period 221 * @mvm: the mvm component 222 * @vif: the virtual interface for which the channel switch is issued 223 * @duration: the duration of the NoA in TU. 224 * @apply_time: NoA start time in GP2. 225 * 226 * This function is used to schedule NoA time event and is used to perform 227 * the channel switch flow. 228 */ 229 int iwl_mvm_schedule_csa_period(struct iwl_mvm *mvm, 230 struct ieee80211_vif *vif, 231 u32 duration, u32 apply_time); 232 233 /** 234 * iwl_mvm_te_scheduled - check if the fw received the TE cmd 235 * @te_data: the time event data that corresponds to that time event 236 * 237 * This function returns true iff this TE is added to the fw. 238 */ 239 static inline bool 240 iwl_mvm_te_scheduled(struct iwl_mvm_time_event_data *te_data) 241 { 242 if (!te_data) 243 return false; 244 245 return !!te_data->uid; 246 } 247 248 /** 249 * iwl_mvm_schedule_session_protection - schedule a session protection 250 * @mvm: the mvm component 251 * @vif: the virtual interface for which the protection issued 252 * @duration: the duration of the protection 253 */ 254 void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm, 255 struct ieee80211_vif *vif, 256 u32 duration, u32 min_duration); 257 258 /** 259 * iwl_mvm_rx_session_protect_notif - handles %SESSION_PROTECTION_NOTIF 260 */ 261 void iwl_mvm_rx_session_protect_notif(struct iwl_mvm *mvm, 262 struct iwl_rx_cmd_buffer *rxb); 263 264 #endif /* __time_event_h__ */ 265