1 /****************************************************************************** 2 * 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * GPL LICENSE SUMMARY 7 * 8 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. 9 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 10 * Copyright(c) 2015 - 2016 Intel Deutschland GmbH 11 * Copyright(c) 2018 - 2019 Intel Corporation 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of version 2 of the GNU General Public License as 15 * published by the Free Software Foundation. 16 * 17 * This program is distributed in the hope that it will be useful, but 18 * WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 20 * General Public License for more details. 21 * 22 * The full GNU General Public License is included in this distribution 23 * in the file called COPYING. 24 * 25 * Contact Information: 26 * Intel Linux Wireless <linuxwifi@intel.com> 27 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 28 * 29 * BSD LICENSE 30 * 31 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. 32 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 33 * Copyright(c) 2015 - 2016 Intel Deutschland GmbH 34 * Copyright(c) 2018 - 2019 Intel Corporation 35 * All rights reserved. 36 * 37 * Redistribution and use in source and binary forms, with or without 38 * modification, are permitted provided that the following conditions 39 * are met: 40 * 41 * * Redistributions of source code must retain the above copyright 42 * notice, this list of conditions and the following disclaimer. 43 * * Redistributions in binary form must reproduce the above copyright 44 * notice, this list of conditions and the following disclaimer in 45 * the documentation and/or other materials provided with the 46 * distribution. 47 * * Neither the name Intel Corporation nor the names of its 48 * contributors may be used to endorse or promote products derived 49 * from this software without specific prior written permission. 50 * 51 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 52 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 53 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 54 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 55 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 56 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 57 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 58 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 59 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 60 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 61 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 62 * 63 *****************************************************************************/ 64 65 #ifndef __sta_h__ 66 #define __sta_h__ 67 68 #include <linux/spinlock.h> 69 #include <net/mac80211.h> 70 #include <linux/wait.h> 71 72 #include "iwl-trans.h" /* for IWL_MAX_TID_COUNT */ 73 #include "fw-api.h" /* IWL_MVM_STATION_COUNT */ 74 #include "rs.h" 75 76 struct iwl_mvm; 77 struct iwl_mvm_vif; 78 79 /** 80 * DOC: DQA - Dynamic Queue Allocation -introduction 81 * 82 * Dynamic Queue Allocation (AKA "DQA") is a feature implemented in iwlwifi 83 * driver to allow dynamic allocation of queues on-demand, rather than allocate 84 * them statically ahead of time. Ideally, we would like to allocate one queue 85 * per RA/TID, thus allowing an AP - for example - to send BE traffic to STA2 86 * even if it also needs to send traffic to a sleeping STA1, without being 87 * blocked by the sleeping station. 88 * 89 * Although the queues in DQA mode are dynamically allocated, there are still 90 * some queues that are statically allocated: 91 * TXQ #0 - command queue 92 * TXQ #1 - aux frames 93 * TXQ #2 - P2P device frames 94 * TXQ #3 - P2P GO/SoftAP GCAST/BCAST frames 95 * TXQ #4 - BSS DATA frames queue 96 * TXQ #5-8 - Non-QoS and MGMT frames queue pool 97 * TXQ #9 - P2P GO/SoftAP probe responses 98 * TXQ #10-31 - DATA frames queue pool 99 * The queues are dynamically taken from either the MGMT frames queue pool or 100 * the DATA frames one. See the %iwl_mvm_dqa_txq for more information on every 101 * queue. 102 * 103 * When a frame for a previously unseen RA/TID comes in, it needs to be deferred 104 * until a queue is allocated for it, and only then can be TXed. Therefore, it 105 * is placed into %iwl_mvm_tid_data.deferred_tx_frames, and a worker called 106 * %mvm->add_stream_wk later allocates the queues and TXes the deferred frames. 107 * 108 * For convenience, MGMT is considered as if it has TID=8, and go to the MGMT 109 * queues in the pool. If there is no longer a free MGMT queue to allocate, a 110 * queue will be allocated from the DATA pool instead. Since QoS NDPs can create 111 * a problem for aggregations, they too will use a MGMT queue. 112 * 113 * When adding a STA, a DATA queue is reserved for it so that it can TX from 114 * it. If no such free queue exists for reserving, the STA addition will fail. 115 * 116 * If the DATA queue pool gets exhausted, no new STA will be accepted, and if a 117 * new RA/TID comes in for an existing STA, one of the STA's queues will become 118 * shared and will serve more than the single TID (but always for the same RA!). 119 * 120 * When a RA/TID needs to become aggregated, no new queue is required to be 121 * allocated, only mark the queue as aggregated via the ADD_STA command. Note, 122 * however, that a shared queue cannot be aggregated, and only after the other 123 * TIDs become inactive and are removed - only then can the queue be 124 * reconfigured and become aggregated. 125 * 126 * When removing a station, its queues are returned to the pool for reuse. Here 127 * we also need to make sure that we are synced with the worker thread that TXes 128 * the deferred frames so we don't get into a situation where the queues are 129 * removed and then the worker puts deferred frames onto the released queues or 130 * tries to allocate new queues for a STA we don't need anymore. 131 */ 132 133 /** 134 * DOC: station table - introduction 135 * 136 * The station table is a list of data structure that reprensent the stations. 137 * In STA/P2P client mode, the driver will hold one station for the AP/ GO. 138 * In GO/AP mode, the driver will have as many stations as associated clients. 139 * All these stations are reflected in the fw's station table. The driver 140 * keeps the fw's station table up to date with the ADD_STA command. Stations 141 * can be removed by the REMOVE_STA command. 142 * 143 * All the data related to a station is held in the structure %iwl_mvm_sta 144 * which is embed in the mac80211's %ieee80211_sta (in the drv_priv) area. 145 * This data includes the index of the station in the fw, per tid information 146 * (sequence numbers, Block-ack state machine, etc...). The stations are 147 * created and deleted by the %sta_state callback from %ieee80211_ops. 148 * 149 * The driver holds a map: %fw_id_to_mac_id that allows to fetch a 150 * %ieee80211_sta (and the %iwl_mvm_sta embedded into it) based on a fw 151 * station index. That way, the driver is able to get the tid related data in 152 * O(1) in time sensitive paths (Tx / Tx response / BA notification). These 153 * paths are triggered by the fw, and the driver needs to get a pointer to the 154 * %ieee80211 structure. This map helps to get that pointer quickly. 155 */ 156 157 /** 158 * DOC: station table - locking 159 * 160 * As stated before, the station is created / deleted by mac80211's %sta_state 161 * callback from %ieee80211_ops which can sleep. The next paragraph explains 162 * the locking of a single stations, the next ones relates to the station 163 * table. 164 * 165 * The station holds the sequence number per tid. So this data needs to be 166 * accessed in the Tx path (which is softIRQ). It also holds the Block-Ack 167 * information (the state machine / and the logic that checks if the queues 168 * were drained), so it also needs to be accessible from the Tx response flow. 169 * In short, the station needs to be access from sleepable context as well as 170 * from tasklets, so the station itself needs a spinlock. 171 * 172 * The writers of %fw_id_to_mac_id map are serialized by the global mutex of 173 * the mvm op_mode. This is possible since %sta_state can sleep. 174 * The pointers in this map are RCU protected, hence we won't replace the 175 * station while we have Tx / Tx response / BA notification running. 176 * 177 * If a station is deleted while it still has packets in its A-MPDU queues, 178 * then the reclaim flow will notice that there is no station in the map for 179 * sta_id and it will dump the responses. 180 */ 181 182 /** 183 * DOC: station table - internal stations 184 * 185 * The FW needs a few internal stations that are not reflected in 186 * mac80211, such as broadcast station in AP / GO mode, or AUX sta for 187 * scanning and P2P device (during the GO negotiation). 188 * For these kind of stations we have %iwl_mvm_int_sta struct which holds the 189 * data relevant for them from both %iwl_mvm_sta and %ieee80211_sta. 190 * Usually the data for these stations is static, so no locking is required, 191 * and no TID data as this is also not needed. 192 * One thing to note, is that these stations have an ID in the fw, but not 193 * in mac80211. In order to "reserve" them a sta_id in %fw_id_to_mac_id 194 * we fill ERR_PTR(EINVAL) in this mapping and all other dereferencing of 195 * pointers from this mapping need to check that the value is not error 196 * or NULL. 197 * 198 * Currently there is only one auxiliary station for scanning, initialized 199 * on init. 200 */ 201 202 /** 203 * DOC: station table - AP Station in STA mode 204 * 205 * %iwl_mvm_vif includes the index of the AP station in the fw's STA table: 206 * %ap_sta_id. To get the point to the corresponding %ieee80211_sta, 207 * &fw_id_to_mac_id can be used. Due to the way the fw works, we must not remove 208 * the AP station from the fw before setting the MAC context as unassociated. 209 * Hence, %fw_id_to_mac_id[%ap_sta_id] will be NULLed when the AP station is 210 * removed by mac80211, but the station won't be removed in the fw until the 211 * VIF is set as unassociated. Then, %ap_sta_id will be invalidated. 212 */ 213 214 /** 215 * DOC: station table - Drain vs. Flush 216 * 217 * Flush means that all the frames in the SCD queue are dumped regardless the 218 * station to which they were sent. We do that when we disassociate and before 219 * we remove the STA of the AP. The flush can be done synchronously against the 220 * fw. 221 * Drain means that the fw will drop all the frames sent to a specific station. 222 * This is useful when a client (if we are IBSS / GO or AP) disassociates. 223 */ 224 225 /** 226 * DOC: station table - fw restart 227 * 228 * When the fw asserts, or we have any other issue that requires to reset the 229 * driver, we require mac80211 to reconfigure the driver. Since the private 230 * data of the stations is embed in mac80211's %ieee80211_sta, that data will 231 * not be zeroed and needs to be reinitialized manually. 232 * %IWL_MVM_STATUS_IN_HW_RESTART is set during restart and that will hint us 233 * that we must not allocate a new sta_id but reuse the previous one. This 234 * means that the stations being re-added after the reset will have the same 235 * place in the fw as before the reset. We do need to zero the %fw_id_to_mac_id 236 * map, since the stations aren't in the fw any more. Internal stations that 237 * are not added by mac80211 will be re-added in the init flow that is called 238 * after the restart: mac80211 call's %iwl_mvm_mac_start which calls to 239 * %iwl_mvm_up. 240 */ 241 242 /** 243 * DOC: AP mode - PS 244 * 245 * When a station is asleep, the fw will set it as "asleep". All frames on 246 * shared queues (i.e. non-aggregation queues) to that station will be dropped 247 * by the fw (%TX_STATUS_FAIL_DEST_PS failure code). 248 * 249 * AMPDUs are in a separate queue that is stopped by the fw. We just need to 250 * let mac80211 know when there are frames in these queues so that it can 251 * properly handle trigger frames. 252 * 253 * When a trigger frame is received, mac80211 tells the driver to send frames 254 * from the AMPDU queues or sends frames to non-aggregation queues itself, 255 * depending on which ACs are delivery-enabled and what TID has frames to 256 * transmit. Note that mac80211 has all the knowledge since all the non-agg 257 * frames are buffered / filtered, and the driver tells mac80211 about agg 258 * frames). The driver needs to tell the fw to let frames out even if the 259 * station is asleep. This is done by %iwl_mvm_sta_modify_sleep_tx_count. 260 * 261 * When we receive a frame from that station with PM bit unset, the driver 262 * needs to let the fw know that this station isn't asleep any more. This is 263 * done by %iwl_mvm_sta_modify_ps_wake in response to mac80211 signaling the 264 * station's wakeup. 265 * 266 * For a GO, the Service Period might be cut short due to an absence period 267 * of the GO. In this (and all other cases) the firmware notifies us with the 268 * EOSP_NOTIFICATION, and we notify mac80211 of that. Further frames that we 269 * already sent to the device will be rejected again. 270 * 271 * See also "AP support for powersaving clients" in mac80211.h. 272 */ 273 274 /** 275 * enum iwl_mvm_agg_state 276 * 277 * The state machine of the BA agreement establishment / tear down. 278 * These states relate to a specific RA / TID. 279 * 280 * @IWL_AGG_OFF: aggregation is not used 281 * @IWL_AGG_QUEUED: aggregation start work has been queued 282 * @IWL_AGG_STARTING: aggregation are starting (between start and oper) 283 * @IWL_AGG_ON: aggregation session is up 284 * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the 285 * HW queue to be empty from packets for this RA /TID. 286 * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the 287 * HW queue to be empty from packets for this RA /TID. 288 */ 289 enum iwl_mvm_agg_state { 290 IWL_AGG_OFF = 0, 291 IWL_AGG_QUEUED, 292 IWL_AGG_STARTING, 293 IWL_AGG_ON, 294 IWL_EMPTYING_HW_QUEUE_ADDBA, 295 IWL_EMPTYING_HW_QUEUE_DELBA, 296 }; 297 298 /** 299 * struct iwl_mvm_tid_data - holds the states for each RA / TID 300 * @seq_number: the next WiFi sequence number to use 301 * @next_reclaimed: the WiFi sequence number of the next packet to be acked. 302 * This is basically (last acked packet++). 303 * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the 304 * Tx response (TX_CMD), and the block ack notification (COMPRESSED_BA). 305 * @lq_color: the color of the LQ command as it appears in tx response. 306 * @amsdu_in_ampdu_allowed: true if A-MSDU in A-MPDU is allowed. 307 * @state: state of the BA agreement establishment / tear down. 308 * @txq_id: Tx queue used by the BA session / DQA 309 * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or 310 * the first packet to be sent in legacy HW queue in Tx AGG stop flow. 311 * Basically when next_reclaimed reaches ssn, we can tell mac80211 that 312 * we are ready to finish the Tx AGG stop / start flow. 313 * @tx_time: medium time consumed by this A-MPDU 314 * @tpt_meas_start: time of the throughput measurements start, is reset every HZ 315 * @tx_count_last: number of frames transmitted during the last second 316 * @tx_count: counts the number of frames transmitted since the last reset of 317 * tpt_meas_start 318 */ 319 struct iwl_mvm_tid_data { 320 u16 seq_number; 321 u16 next_reclaimed; 322 /* The rest is Tx AGG related */ 323 u32 rate_n_flags; 324 u8 lq_color; 325 bool amsdu_in_ampdu_allowed; 326 enum iwl_mvm_agg_state state; 327 u16 txq_id; 328 u16 ssn; 329 u16 tx_time; 330 unsigned long tpt_meas_start; 331 u32 tx_count_last; 332 u32 tx_count; 333 }; 334 335 struct iwl_mvm_key_pn { 336 struct rcu_head rcu_head; 337 struct { 338 u8 pn[IWL_MAX_TID_COUNT][IEEE80211_CCMP_PN_LEN]; 339 } ____cacheline_aligned_in_smp q[]; 340 }; 341 342 struct iwl_mvm_delba_data { 343 u32 baid; 344 } __packed; 345 346 struct iwl_mvm_delba_notif { 347 struct iwl_mvm_internal_rxq_notif metadata; 348 struct iwl_mvm_delba_data delba; 349 } __packed; 350 351 /** 352 * struct iwl_mvm_rxq_dup_data - per station per rx queue data 353 * @last_seq: last sequence per tid for duplicate packet detection 354 * @last_sub_frame: last subframe packet 355 */ 356 struct iwl_mvm_rxq_dup_data { 357 __le16 last_seq[IWL_MAX_TID_COUNT + 1]; 358 u8 last_sub_frame[IWL_MAX_TID_COUNT + 1]; 359 } ____cacheline_aligned_in_smp; 360 361 /** 362 * struct iwl_mvm_sta - representation of a station in the driver 363 * @sta_id: the index of the station in the fw (will be replaced by id_n_color) 364 * @tfd_queue_msk: the tfd queues used by the station 365 * @mac_id_n_color: the MAC context this station is linked to 366 * @tid_disable_agg: bitmap: if bit(tid) is set, the fw won't send ampdus for 367 * tid. 368 * @max_agg_bufsize: the maximal size of the AGG buffer for this station 369 * @sta_type: station type 370 * @sta_state: station state according to enum %ieee80211_sta_state 371 * @bt_reduced_txpower: is reduced tx power enabled for this station 372 * @next_status_eosp: the next reclaimed packet is a PS-Poll response and 373 * we need to signal the EOSP 374 * @lock: lock to protect the whole struct. Since %tid_data is access from Tx 375 * and from Tx response flow, it needs a spinlock. 376 * @tid_data: per tid data + mgmt. Look at %iwl_mvm_tid_data. 377 * @tid_to_baid: a simple map of TID to baid 378 * @lq_sta: holds rate scaling data, either for the case when RS is done in 379 * the driver - %rs_drv or in the FW - %rs_fw. 380 * @reserved_queue: the queue reserved for this STA for DQA purposes 381 * Every STA has is given one reserved queue to allow it to operate. If no 382 * such queue can be guaranteed, the STA addition will fail. 383 * @tx_protection: reference counter for controlling the Tx protection. 384 * @tt_tx_protection: is thermal throttling enable Tx protection? 385 * @disable_tx: is tx to this STA disabled? 386 * @amsdu_enabled: bitmap of TX AMSDU allowed TIDs. 387 * In case TLC offload is not active it is either 0xFFFF or 0. 388 * @max_amsdu_len: max AMSDU length 389 * @agg_tids: bitmap of tids whose status is operational aggregated (IWL_AGG_ON) 390 * @sleep_tx_count: the number of frames that we told the firmware to let out 391 * even when that station is asleep. This is useful in case the queue 392 * gets empty before all the frames were sent, which can happen when 393 * we are sending frames from an AMPDU queue and there was a hole in 394 * the BA window. To be used for UAPSD only. 395 * @ptk_pn: per-queue PTK PN data structures 396 * @dup_data: per queue duplicate packet detection data 397 * @deferred_traffic_tid_map: indication bitmap of deferred traffic per-TID 398 * @tx_ant: the index of the antenna to use for data tx to this station. Only 399 * used during connection establishment (e.g. for the 4 way handshake 400 * exchange). 401 * 402 * When mac80211 creates a station it reserves some space (hw->sta_data_size) 403 * in the structure for use by driver. This structure is placed in that 404 * space. 405 * 406 */ 407 struct iwl_mvm_sta { 408 u32 sta_id; 409 u32 tfd_queue_msk; 410 u32 mac_id_n_color; 411 u16 tid_disable_agg; 412 u16 max_agg_bufsize; 413 enum iwl_sta_type sta_type; 414 enum ieee80211_sta_state sta_state; 415 bool bt_reduced_txpower; 416 bool next_status_eosp; 417 spinlock_t lock; 418 struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT + 1]; 419 u8 tid_to_baid[IWL_MAX_TID_COUNT]; 420 union { 421 struct iwl_lq_sta_rs_fw rs_fw; 422 struct iwl_lq_sta rs_drv; 423 } lq_sta; 424 struct ieee80211_vif *vif; 425 struct iwl_mvm_key_pn __rcu *ptk_pn[4]; 426 struct iwl_mvm_rxq_dup_data *dup_data; 427 428 u8 reserved_queue; 429 430 /* Temporary, until the new TLC will control the Tx protection */ 431 s8 tx_protection; 432 bool tt_tx_protection; 433 434 bool disable_tx; 435 u16 amsdu_enabled; 436 u16 max_amsdu_len; 437 bool sleeping; 438 u8 agg_tids; 439 u8 sleep_tx_count; 440 u8 avg_energy; 441 u8 tx_ant; 442 }; 443 444 u16 iwl_mvm_tid_queued(struct iwl_mvm *mvm, struct iwl_mvm_tid_data *tid_data); 445 446 static inline struct iwl_mvm_sta * 447 iwl_mvm_sta_from_mac80211(struct ieee80211_sta *sta) 448 { 449 return (void *)sta->drv_priv; 450 } 451 452 /** 453 * struct iwl_mvm_int_sta - representation of an internal station (auxiliary or 454 * broadcast) 455 * @sta_id: the index of the station in the fw (will be replaced by id_n_color) 456 * @type: station type 457 * @tfd_queue_msk: the tfd queues used by the station 458 */ 459 struct iwl_mvm_int_sta { 460 u32 sta_id; 461 enum iwl_sta_type type; 462 u32 tfd_queue_msk; 463 }; 464 465 /** 466 * Send the STA info to the FW. 467 * 468 * @mvm: the iwl_mvm* to use 469 * @sta: the STA 470 * @update: this is true if the FW is being updated about a STA it already knows 471 * about. Otherwise (if this is a new STA), this should be false. 472 * @flags: if update==true, this marks what is being changed via ORs of values 473 * from enum iwl_sta_modify_flag. Otherwise, this is ignored. 474 */ 475 int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, 476 bool update, unsigned int flags); 477 int iwl_mvm_add_sta(struct iwl_mvm *mvm, 478 struct ieee80211_vif *vif, 479 struct ieee80211_sta *sta); 480 481 static inline int iwl_mvm_update_sta(struct iwl_mvm *mvm, 482 struct ieee80211_vif *vif, 483 struct ieee80211_sta *sta) 484 { 485 return iwl_mvm_sta_send_to_fw(mvm, sta, true, 0); 486 } 487 488 int iwl_mvm_wait_sta_queues_empty(struct iwl_mvm *mvm, 489 struct iwl_mvm_sta *mvm_sta); 490 int iwl_mvm_rm_sta(struct iwl_mvm *mvm, 491 struct ieee80211_vif *vif, 492 struct ieee80211_sta *sta); 493 int iwl_mvm_rm_sta_id(struct iwl_mvm *mvm, 494 struct ieee80211_vif *vif, 495 u8 sta_id); 496 int iwl_mvm_set_sta_key(struct iwl_mvm *mvm, 497 struct ieee80211_vif *vif, 498 struct ieee80211_sta *sta, 499 struct ieee80211_key_conf *keyconf, 500 u8 key_offset); 501 int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm, 502 struct ieee80211_vif *vif, 503 struct ieee80211_sta *sta, 504 struct ieee80211_key_conf *keyconf); 505 506 void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm, 507 struct ieee80211_vif *vif, 508 struct ieee80211_key_conf *keyconf, 509 struct ieee80211_sta *sta, u32 iv32, 510 u16 *phase1key); 511 512 void iwl_mvm_rx_eosp_notif(struct iwl_mvm *mvm, 513 struct iwl_rx_cmd_buffer *rxb); 514 515 /* AMPDU */ 516 int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, 517 int tid, u16 ssn, bool start, u16 buf_size, u16 timeout); 518 int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif, 519 struct ieee80211_sta *sta, u16 tid, u16 *ssn); 520 int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif, 521 struct ieee80211_sta *sta, u16 tid, u16 buf_size, 522 bool amsdu); 523 int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif, 524 struct ieee80211_sta *sta, u16 tid); 525 int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, 526 struct ieee80211_sta *sta, u16 tid); 527 528 int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, 529 int tid, u8 queue, bool start); 530 531 int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm); 532 void iwl_mvm_del_aux_sta(struct iwl_mvm *mvm); 533 534 int iwl_mvm_alloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 535 int iwl_mvm_send_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 536 int iwl_mvm_add_p2p_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 537 int iwl_mvm_send_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 538 int iwl_mvm_rm_p2p_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 539 int iwl_mvm_add_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 540 int iwl_mvm_rm_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 541 int iwl_mvm_allocate_int_sta(struct iwl_mvm *mvm, 542 struct iwl_mvm_int_sta *sta, 543 u32 qmask, enum nl80211_iftype iftype, 544 enum iwl_sta_type type); 545 void iwl_mvm_dealloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 546 void iwl_mvm_dealloc_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta); 547 int iwl_mvm_add_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 548 int iwl_mvm_rm_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 549 void iwl_mvm_dealloc_snif_sta(struct iwl_mvm *mvm); 550 551 void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, 552 struct ieee80211_sta *sta); 553 void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, 554 struct ieee80211_sta *sta, 555 enum ieee80211_frame_release_type reason, 556 u16 cnt, u16 tids, bool more_data, 557 bool single_sta_queue); 558 int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, 559 bool drain); 560 void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm *mvm, 561 struct iwl_mvm_sta *mvmsta, bool disable); 562 void iwl_mvm_sta_modify_disable_tx_ap(struct iwl_mvm *mvm, 563 struct ieee80211_sta *sta, 564 bool disable); 565 void iwl_mvm_modify_all_sta_disable_tx(struct iwl_mvm *mvm, 566 struct iwl_mvm_vif *mvmvif, 567 bool disable); 568 void iwl_mvm_csa_client_absent(struct iwl_mvm *mvm, struct ieee80211_vif *vif); 569 void iwl_mvm_add_new_dqa_stream_wk(struct work_struct *wk); 570 571 #endif /* __sta_h__ */ 572