1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
9  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
10  * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of version 2 of the GNU General Public License as
14  * published by the Free Software Foundation.
15  *
16  * This program is distributed in the hope that it will be useful, but
17  * WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
19  * General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
24  * USA
25  *
26  * The full GNU General Public License is included in this distribution
27  * in the file called COPYING.
28  *
29  * Contact Information:
30  *  Intel Linux Wireless <linuxwifi@intel.com>
31  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
32  *
33  * BSD LICENSE
34  *
35  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
36  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
37  * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
38  * All rights reserved.
39  *
40  * Redistribution and use in source and binary forms, with or without
41  * modification, are permitted provided that the following conditions
42  * are met:
43  *
44  *  * Redistributions of source code must retain the above copyright
45  *    notice, this list of conditions and the following disclaimer.
46  *  * Redistributions in binary form must reproduce the above copyright
47  *    notice, this list of conditions and the following disclaimer in
48  *    the documentation and/or other materials provided with the
49  *    distribution.
50  *  * Neither the name Intel Corporation nor the names of its
51  *    contributors may be used to endorse or promote products derived
52  *    from this software without specific prior written permission.
53  *
54  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
55  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
56  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
57  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
58  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
59  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
60  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
61  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
62  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
63  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
64  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
65  *
66  *****************************************************************************/
67 #ifndef __iwl_trans_h__
68 #define __iwl_trans_h__
69 
70 #include <linux/ieee80211.h>
71 #include <linux/mm.h> /* for page_address */
72 #include <linux/lockdep.h>
73 #include <linux/kernel.h>
74 
75 #include "iwl-debug.h"
76 #include "iwl-config.h"
77 #include "fw/img.h"
78 #include "iwl-op-mode.h"
79 #include "fw/api/cmdhdr.h"
80 #include "fw/api/txq.h"
81 
82 /**
83  * DOC: Transport layer - what is it ?
84  *
85  * The transport layer is the layer that deals with the HW directly. It provides
86  * an abstraction of the underlying HW to the upper layer. The transport layer
87  * doesn't provide any policy, algorithm or anything of this kind, but only
88  * mechanisms to make the HW do something. It is not completely stateless but
89  * close to it.
90  * We will have an implementation for each different supported bus.
91  */
92 
93 /**
94  * DOC: Life cycle of the transport layer
95  *
96  * The transport layer has a very precise life cycle.
97  *
98  *	1) A helper function is called during the module initialization and
99  *	   registers the bus driver's ops with the transport's alloc function.
100  *	2) Bus's probe calls to the transport layer's allocation functions.
101  *	   Of course this function is bus specific.
102  *	3) This allocation functions will spawn the upper layer which will
103  *	   register mac80211.
104  *
105  *	4) At some point (i.e. mac80211's start call), the op_mode will call
106  *	   the following sequence:
107  *	   start_hw
108  *	   start_fw
109  *
110  *	5) Then when finished (or reset):
111  *	   stop_device
112  *
113  *	6) Eventually, the free function will be called.
114  */
115 
116 #define FH_RSCSR_FRAME_SIZE_MSK		0x00003FFF	/* bits 0-13 */
117 #define FH_RSCSR_FRAME_INVALID		0x55550000
118 #define FH_RSCSR_FRAME_ALIGN		0x40
119 #define FH_RSCSR_RPA_EN			BIT(25)
120 #define FH_RSCSR_RXQ_POS		16
121 #define FH_RSCSR_RXQ_MASK		0x3F0000
122 
123 struct iwl_rx_packet {
124 	/*
125 	 * The first 4 bytes of the RX frame header contain both the RX frame
126 	 * size and some flags.
127 	 * Bit fields:
128 	 * 31:    flag flush RB request
129 	 * 30:    flag ignore TC (terminal counter) request
130 	 * 29:    flag fast IRQ request
131 	 * 28-26: Reserved
132 	 * 25:    Offload enabled
133 	 * 24:    RPF enabled
134 	 * 23:    RSS enabled
135 	 * 22:    Checksum enabled
136 	 * 21-16: RX queue
137 	 * 15-14: Reserved
138 	 * 13-00: RX frame size
139 	 */
140 	__le32 len_n_flags;
141 	struct iwl_cmd_header hdr;
142 	u8 data[];
143 } __packed;
144 
145 static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt)
146 {
147 	return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
148 }
149 
150 static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
151 {
152 	return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr);
153 }
154 
155 /**
156  * enum CMD_MODE - how to send the host commands ?
157  *
158  * @CMD_ASYNC: Return right away and don't wait for the response
159  * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of
160  *	the response. The caller needs to call iwl_free_resp when done.
161  * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the
162  *	command queue, but after other high priority commands. Valid only
163  *	with CMD_ASYNC.
164  * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle.
165  * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
166  * @CMD_WAKE_UP_TRANS: The command response should wake up the trans
167  *	(i.e. mark it as non-idle).
168  * @CMD_WANT_ASYNC_CALLBACK: the op_mode's async callback function must be
169  *	called after this command completes. Valid only with CMD_ASYNC.
170  */
171 enum CMD_MODE {
172 	CMD_ASYNC		= BIT(0),
173 	CMD_WANT_SKB		= BIT(1),
174 	CMD_SEND_IN_RFKILL	= BIT(2),
175 	CMD_HIGH_PRIO		= BIT(3),
176 	CMD_SEND_IN_IDLE	= BIT(4),
177 	CMD_MAKE_TRANS_IDLE	= BIT(5),
178 	CMD_WAKE_UP_TRANS	= BIT(6),
179 	CMD_WANT_ASYNC_CALLBACK	= BIT(7),
180 };
181 
182 #define DEF_CMD_PAYLOAD_SIZE 320
183 
184 /**
185  * struct iwl_device_cmd
186  *
187  * For allocation of the command and tx queues, this establishes the overall
188  * size of the largest command we send to uCode, except for commands that
189  * aren't fully copied and use other TFD space.
190  */
191 struct iwl_device_cmd {
192 	union {
193 		struct {
194 			struct iwl_cmd_header hdr;	/* uCode API */
195 			u8 payload[DEF_CMD_PAYLOAD_SIZE];
196 		};
197 		struct {
198 			struct iwl_cmd_header_wide hdr_wide;
199 			u8 payload_wide[DEF_CMD_PAYLOAD_SIZE -
200 					sizeof(struct iwl_cmd_header_wide) +
201 					sizeof(struct iwl_cmd_header)];
202 		};
203 	};
204 } __packed;
205 
206 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
207 
208 /*
209  * number of transfer buffers (fragments) per transmit frame descriptor;
210  * this is just the driver's idea, the hardware supports 20
211  */
212 #define IWL_MAX_CMD_TBS_PER_TFD	2
213 
214 /**
215  * enum iwl_hcmd_dataflag - flag for each one of the chunks of the command
216  *
217  * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
218  *	ring. The transport layer doesn't map the command's buffer to DMA, but
219  *	rather copies it to a previously allocated DMA buffer. This flag tells
220  *	the transport layer not to copy the command, but to map the existing
221  *	buffer (that is passed in) instead. This saves the memcpy and allows
222  *	commands that are bigger than the fixed buffer to be submitted.
223  *	Note that a TFD entry after a NOCOPY one cannot be a normal copied one.
224  * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this
225  *	chunk internally and free it again after the command completes. This
226  *	can (currently) be used only once per command.
227  *	Note that a TFD entry after a DUP one cannot be a normal copied one.
228  */
229 enum iwl_hcmd_dataflag {
230 	IWL_HCMD_DFL_NOCOPY	= BIT(0),
231 	IWL_HCMD_DFL_DUP	= BIT(1),
232 };
233 
234 /**
235  * struct iwl_host_cmd - Host command to the uCode
236  *
237  * @data: array of chunks that composes the data of the host command
238  * @resp_pkt: response packet, if %CMD_WANT_SKB was set
239  * @_rx_page_order: (internally used to free response packet)
240  * @_rx_page_addr: (internally used to free response packet)
241  * @flags: can be CMD_*
242  * @len: array of the lengths of the chunks in data
243  * @dataflags: IWL_HCMD_DFL_*
244  * @id: command id of the host command, for wide commands encoding the
245  *	version and group as well
246  */
247 struct iwl_host_cmd {
248 	const void *data[IWL_MAX_CMD_TBS_PER_TFD];
249 	struct iwl_rx_packet *resp_pkt;
250 	unsigned long _rx_page_addr;
251 	u32 _rx_page_order;
252 
253 	u32 flags;
254 	u32 id;
255 	u16 len[IWL_MAX_CMD_TBS_PER_TFD];
256 	u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
257 };
258 
259 static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
260 {
261 	free_pages(cmd->_rx_page_addr, cmd->_rx_page_order);
262 }
263 
264 struct iwl_rx_cmd_buffer {
265 	struct page *_page;
266 	int _offset;
267 	bool _page_stolen;
268 	u32 _rx_page_order;
269 	unsigned int truesize;
270 };
271 
272 static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
273 {
274 	return (void *)((unsigned long)page_address(r->_page) + r->_offset);
275 }
276 
277 static inline int rxb_offset(struct iwl_rx_cmd_buffer *r)
278 {
279 	return r->_offset;
280 }
281 
282 static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
283 {
284 	r->_page_stolen = true;
285 	get_page(r->_page);
286 	return r->_page;
287 }
288 
289 static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r)
290 {
291 	__free_pages(r->_page, r->_rx_page_order);
292 }
293 
294 #define MAX_NO_RECLAIM_CMDS	6
295 
296 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
297 
298 /*
299  * Maximum number of HW queues the transport layer
300  * currently supports
301  */
302 #define IWL_MAX_HW_QUEUES		32
303 #define IWL_MAX_TVQM_QUEUES		512
304 
305 #define IWL_MAX_TID_COUNT	8
306 #define IWL_MGMT_TID		15
307 #define IWL_FRAME_LIMIT	64
308 #define IWL_MAX_RX_HW_QUEUES	16
309 
310 /**
311  * enum iwl_wowlan_status - WoWLAN image/device status
312  * @IWL_D3_STATUS_ALIVE: firmware is still running after resume
313  * @IWL_D3_STATUS_RESET: device was reset while suspended
314  */
315 enum iwl_d3_status {
316 	IWL_D3_STATUS_ALIVE,
317 	IWL_D3_STATUS_RESET,
318 };
319 
320 /**
321  * enum iwl_trans_status: transport status flags
322  * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed
323  * @STATUS_DEVICE_ENABLED: APM is enabled
324  * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
325  * @STATUS_INT_ENABLED: interrupts are enabled
326  * @STATUS_RFKILL_HW: the actual HW state of the RF-kill switch
327  * @STATUS_RFKILL_OPMODE: RF-kill state reported to opmode
328  * @STATUS_FW_ERROR: the fw is in error state
329  * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands
330  *	are sent
331  * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent
332  * @STATUS_TRANS_DEAD: trans is dead - avoid any read/write operation
333  */
334 enum iwl_trans_status {
335 	STATUS_SYNC_HCMD_ACTIVE,
336 	STATUS_DEVICE_ENABLED,
337 	STATUS_TPOWER_PMI,
338 	STATUS_INT_ENABLED,
339 	STATUS_RFKILL_HW,
340 	STATUS_RFKILL_OPMODE,
341 	STATUS_FW_ERROR,
342 	STATUS_TRANS_GOING_IDLE,
343 	STATUS_TRANS_IDLE,
344 	STATUS_TRANS_DEAD,
345 };
346 
347 static inline int
348 iwl_trans_get_rb_size_order(enum iwl_amsdu_size rb_size)
349 {
350 	switch (rb_size) {
351 	case IWL_AMSDU_4K:
352 		return get_order(4 * 1024);
353 	case IWL_AMSDU_8K:
354 		return get_order(8 * 1024);
355 	case IWL_AMSDU_12K:
356 		return get_order(12 * 1024);
357 	default:
358 		WARN_ON(1);
359 		return -1;
360 	}
361 }
362 
363 struct iwl_hcmd_names {
364 	u8 cmd_id;
365 	const char *const cmd_name;
366 };
367 
368 #define HCMD_NAME(x)	\
369 	{ .cmd_id = x, .cmd_name = #x }
370 
371 struct iwl_hcmd_arr {
372 	const struct iwl_hcmd_names *arr;
373 	int size;
374 };
375 
376 #define HCMD_ARR(x)	\
377 	{ .arr = x, .size = ARRAY_SIZE(x) }
378 
379 /**
380  * struct iwl_trans_config - transport configuration
381  *
382  * @op_mode: pointer to the upper layer.
383  * @cmd_queue: the index of the command queue.
384  *	Must be set before start_fw.
385  * @cmd_fifo: the fifo for host commands
386  * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue.
387  * @no_reclaim_cmds: Some devices erroneously don't set the
388  *	SEQ_RX_FRAME bit on some notifications, this is the
389  *	list of such notifications to filter. Max length is
390  *	%MAX_NO_RECLAIM_CMDS.
391  * @n_no_reclaim_cmds: # of commands in list
392  * @rx_buf_size: RX buffer size needed for A-MSDUs
393  *	if unset 4k will be the RX buffer size
394  * @bc_table_dword: set to true if the BC table expects the byte count to be
395  *	in DWORD (as opposed to bytes)
396  * @scd_set_active: should the transport configure the SCD for HCMD queue
397  * @sw_csum_tx: transport should compute the TCP checksum
398  * @command_groups: array of command groups, each member is an array of the
399  *	commands in the group; for debugging only
400  * @command_groups_size: number of command groups, to avoid illegal access
401  * @cb_data_offs: offset inside skb->cb to store transport data at, must have
402  *	space for at least two pointers
403  */
404 struct iwl_trans_config {
405 	struct iwl_op_mode *op_mode;
406 
407 	u8 cmd_queue;
408 	u8 cmd_fifo;
409 	unsigned int cmd_q_wdg_timeout;
410 	const u8 *no_reclaim_cmds;
411 	unsigned int n_no_reclaim_cmds;
412 
413 	enum iwl_amsdu_size rx_buf_size;
414 	bool bc_table_dword;
415 	bool scd_set_active;
416 	bool sw_csum_tx;
417 	const struct iwl_hcmd_arr *command_groups;
418 	int command_groups_size;
419 
420 	u8 cb_data_offs;
421 };
422 
423 struct iwl_trans_dump_data {
424 	u32 len;
425 	u8 data[];
426 };
427 
428 struct iwl_trans;
429 
430 struct iwl_trans_txq_scd_cfg {
431 	u8 fifo;
432 	u8 sta_id;
433 	u8 tid;
434 	bool aggregate;
435 	int frame_limit;
436 };
437 
438 /**
439  * struct iwl_trans_ops - transport specific operations
440  *
441  * All the handlers MUST be implemented
442  *
443  * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken
444  *	out of a low power state. From that point on, the HW can send
445  *	interrupts. May sleep.
446  * @op_mode_leave: Turn off the HW RF kill indication if on
447  *	May sleep
448  * @start_fw: allocates and inits all the resources for the transport
449  *	layer. Also kick a fw image.
450  *	May sleep
451  * @fw_alive: called when the fw sends alive notification. If the fw provides
452  *	the SCD base address in SRAM, then provide it here, or 0 otherwise.
453  *	May sleep
454  * @stop_device: stops the whole device (embedded CPU put to reset) and stops
455  *	the HW. If low_power is true, the NIC will be put in low power state.
456  *	From that point on, the HW will be stopped but will still issue an
457  *	interrupt if the HW RF kill switch is triggered.
458  *	This callback must do the right thing and not crash even if %start_hw()
459  *	was called but not &start_fw(). May sleep.
460  * @d3_suspend: put the device into the correct mode for WoWLAN during
461  *	suspend. This is optional, if not implemented WoWLAN will not be
462  *	supported. This callback may sleep.
463  * @d3_resume: resume the device after WoWLAN, enabling the opmode to
464  *	talk to the WoWLAN image to get its status. This is optional, if not
465  *	implemented WoWLAN will not be supported. This callback may sleep.
466  * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
467  *	If RFkill is asserted in the middle of a SYNC host command, it must
468  *	return -ERFKILL straight away.
469  *	May sleep only if CMD_ASYNC is not set
470  * @tx: send an skb. The transport relies on the op_mode to zero the
471  *	the ieee80211_tx_info->driver_data. If the MPDU is an A-MSDU, all
472  *	the CSUM will be taken care of (TCP CSUM and IP header in case of
473  *	IPv4). If the MPDU is a single MSDU, the op_mode must compute the IP
474  *	header if it is IPv4.
475  *	Must be atomic
476  * @reclaim: free packet until ssn. Returns a list of freed packets.
477  *	Must be atomic
478  * @txq_enable: setup a queue. To setup an AC queue, use the
479  *	iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
480  *	this one. The op_mode must not configure the HCMD queue. The scheduler
481  *	configuration may be %NULL, in which case the hardware will not be
482  *	configured. If true is returned, the operation mode needs to increment
483  *	the sequence number of the packets routed to this queue because of a
484  *	hardware scheduler bug. May sleep.
485  * @txq_disable: de-configure a Tx queue to send AMPDUs
486  *	Must be atomic
487  * @txq_set_shared_mode: change Tx queue shared/unshared marking
488  * @wait_tx_queues_empty: wait until tx queues are empty. May sleep.
489  * @wait_txq_empty: wait until specific tx queue is empty. May sleep.
490  * @freeze_txq_timer: prevents the timer of the queue from firing until the
491  *	queue is set to awake. Must be atomic.
492  * @block_txq_ptrs: stop updating the write pointers of the Tx queues. Note
493  *	that the transport needs to refcount the calls since this function
494  *	will be called several times with block = true, and then the queues
495  *	need to be unblocked only after the same number of calls with
496  *	block = false.
497  * @write8: write a u8 to a register at offset ofs from the BAR
498  * @write32: write a u32 to a register at offset ofs from the BAR
499  * @read32: read a u32 register at offset ofs from the BAR
500  * @read_prph: read a DWORD from a periphery register
501  * @write_prph: write a DWORD to a periphery register
502  * @read_mem: read device's SRAM in DWORD
503  * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
504  *	will be zeroed.
505  * @configure: configure parameters required by the transport layer from
506  *	the op_mode. May be called several times before start_fw, can't be
507  *	called after that.
508  * @set_pmi: set the power pmi state
509  * @grab_nic_access: wake the NIC to be able to access non-HBUS regs.
510  *	Sleeping is not allowed between grab_nic_access and
511  *	release_nic_access.
512  * @release_nic_access: let the NIC go to sleep. The "flags" parameter
513  *	must be the same one that was sent before to the grab_nic_access.
514  * @set_bits_mask - set SRAM register according to value and mask.
515  * @ref: grab a reference to the transport/FW layers, disallowing
516  *	certain low power states
517  * @unref: release a reference previously taken with @ref. Note that
518  *	initially the reference count is 1, making an initial @unref
519  *	necessary to allow low power states.
520  * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last
521  *	TX'ed commands and similar. The buffer will be vfree'd by the caller.
522  *	Note that the transport must fill in the proper file headers.
523  * @dump_regs: dump using IWL_ERR configuration space and memory mapped
524  *	registers of the device to diagnose failure, e.g., when HW becomes
525  *	inaccessible.
526  */
527 struct iwl_trans_ops {
528 
529 	int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power);
530 	void (*op_mode_leave)(struct iwl_trans *iwl_trans);
531 	int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
532 			bool run_in_rfkill);
533 	void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
534 	void (*stop_device)(struct iwl_trans *trans, bool low_power);
535 
536 	void (*d3_suspend)(struct iwl_trans *trans, bool test, bool reset);
537 	int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status,
538 			 bool test, bool reset);
539 
540 	int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
541 
542 	int (*tx)(struct iwl_trans *trans, struct sk_buff *skb,
543 		  struct iwl_device_cmd *dev_cmd, int queue);
544 	void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
545 			struct sk_buff_head *skbs);
546 
547 	bool (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn,
548 			   const struct iwl_trans_txq_scd_cfg *cfg,
549 			   unsigned int queue_wdg_timeout);
550 	void (*txq_disable)(struct iwl_trans *trans, int queue,
551 			    bool configure_scd);
552 	/* a000 functions */
553 	int (*txq_alloc)(struct iwl_trans *trans,
554 			 struct iwl_tx_queue_cfg_cmd *cmd,
555 			 int cmd_id,
556 			 unsigned int queue_wdg_timeout);
557 	void (*txq_free)(struct iwl_trans *trans, int queue);
558 
559 	void (*txq_set_shared_mode)(struct iwl_trans *trans, u32 txq_id,
560 				    bool shared);
561 
562 	int (*wait_tx_queues_empty)(struct iwl_trans *trans, u32 txq_bm);
563 	int (*wait_txq_empty)(struct iwl_trans *trans, int queue);
564 	void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs,
565 				 bool freeze);
566 	void (*block_txq_ptrs)(struct iwl_trans *trans, bool block);
567 
568 	void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
569 	void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
570 	u32 (*read32)(struct iwl_trans *trans, u32 ofs);
571 	u32 (*read_prph)(struct iwl_trans *trans, u32 ofs);
572 	void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val);
573 	int (*read_mem)(struct iwl_trans *trans, u32 addr,
574 			void *buf, int dwords);
575 	int (*write_mem)(struct iwl_trans *trans, u32 addr,
576 			 const void *buf, int dwords);
577 	void (*configure)(struct iwl_trans *trans,
578 			  const struct iwl_trans_config *trans_cfg);
579 	void (*set_pmi)(struct iwl_trans *trans, bool state);
580 	bool (*grab_nic_access)(struct iwl_trans *trans, unsigned long *flags);
581 	void (*release_nic_access)(struct iwl_trans *trans,
582 				   unsigned long *flags);
583 	void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
584 			      u32 value);
585 	void (*ref)(struct iwl_trans *trans);
586 	void (*unref)(struct iwl_trans *trans);
587 	int  (*suspend)(struct iwl_trans *trans);
588 	void (*resume)(struct iwl_trans *trans);
589 
590 	struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans,
591 						 const struct iwl_fw_dbg_trigger_tlv
592 						 *trigger);
593 
594 	void (*dump_regs)(struct iwl_trans *trans);
595 };
596 
597 /**
598  * enum iwl_trans_state - state of the transport layer
599  *
600  * @IWL_TRANS_NO_FW: no fw has sent an alive response
601  * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
602  */
603 enum iwl_trans_state {
604 	IWL_TRANS_NO_FW = 0,
605 	IWL_TRANS_FW_ALIVE	= 1,
606 };
607 
608 /**
609  * DOC: Platform power management
610  *
611  * There are two types of platform power management: system-wide
612  * (WoWLAN) and runtime.
613  *
614  * In system-wide power management the entire platform goes into a low
615  * power state (e.g. idle or suspend to RAM) at the same time and the
616  * device is configured as a wakeup source for the entire platform.
617  * This is usually triggered by userspace activity (e.g. the user
618  * presses the suspend button or a power management daemon decides to
619  * put the platform in low power mode).  The device's behavior in this
620  * mode is dictated by the wake-on-WLAN configuration.
621  *
622  * In runtime power management, only the devices which are themselves
623  * idle enter a low power state.  This is done at runtime, which means
624  * that the entire system is still running normally.  This mode is
625  * usually triggered automatically by the device driver and requires
626  * the ability to enter and exit the low power modes in a very short
627  * time, so there is not much impact in usability.
628  *
629  * The terms used for the device's behavior are as follows:
630  *
631  *	- D0: the device is fully powered and the host is awake;
632  *	- D3: the device is in low power mode and only reacts to
633  *		specific events (e.g. magic-packet received or scan
634  *		results found);
635  *	- D0I3: the device is in low power mode and reacts to any
636  *		activity (e.g. RX);
637  *
638  * These terms reflect the power modes in the firmware and are not to
639  * be confused with the physical device power state.  The NIC can be
640  * in D0I3 mode even if, for instance, the PCI device is in D3 state.
641  */
642 
643 /**
644  * enum iwl_plat_pm_mode - platform power management mode
645  *
646  * This enumeration describes the device's platform power management
647  * behavior when in idle mode (i.e. runtime power management) or when
648  * in system-wide suspend (i.e WoWLAN).
649  *
650  * @IWL_PLAT_PM_MODE_DISABLED: power management is disabled for this
651  *	device.  At runtime, this means that nothing happens and the
652  *	device always remains in active.  In system-wide suspend mode,
653  *	it means that the all connections will be closed automatically
654  *	by mac80211 before the platform is suspended.
655  * @IWL_PLAT_PM_MODE_D3: the device goes into D3 mode (i.e. WoWLAN).
656  *	For runtime power management, this mode is not officially
657  *	supported.
658  * @IWL_PLAT_PM_MODE_D0I3: the device goes into D0I3 mode.
659  */
660 enum iwl_plat_pm_mode {
661 	IWL_PLAT_PM_MODE_DISABLED,
662 	IWL_PLAT_PM_MODE_D3,
663 	IWL_PLAT_PM_MODE_D0I3,
664 };
665 
666 /* Max time to wait for trans to become idle/non-idle on d0i3
667  * enter/exit (in msecs).
668  */
669 #define IWL_TRANS_IDLE_TIMEOUT 2000
670 
671 /**
672  * struct iwl_trans - transport common data
673  *
674  * @ops - pointer to iwl_trans_ops
675  * @op_mode - pointer to the op_mode
676  * @cfg - pointer to the configuration
677  * @drv - pointer to iwl_drv
678  * @status: a bit-mask of transport status flags
679  * @dev - pointer to struct device * that represents the device
680  * @max_skb_frags: maximum number of fragments an SKB can have when transmitted.
681  *	0 indicates that frag SKBs (NETIF_F_SG) aren't supported.
682  * @hw_rf_id a u32 with the device RF ID
683  * @hw_id: a u32 with the ID of the device / sub-device.
684  *	Set during transport allocation.
685  * @hw_id_str: a string with info about HW ID. Set during transport allocation.
686  * @pm_support: set to true in start_hw if link pm is supported
687  * @ltr_enabled: set to true if the LTR is enabled
688  * @wide_cmd_header: true when ucode supports wide command header format
689  * @num_rx_queues: number of RX queues allocated by the transport;
690  *	the transport must set this before calling iwl_drv_start()
691  * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
692  *	The user should use iwl_trans_{alloc,free}_tx_cmd.
693  * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before
694  *	starting the firmware, used for tracing
695  * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
696  *	start of the 802.11 header in the @rx_mpdu_cmd
697  * @dflt_pwr_limit: default power limit fetched from the platform (ACPI)
698  * @dbg_dest_tlv: points to the destination TLV for debug
699  * @dbg_conf_tlv: array of pointers to configuration TLVs for debug
700  * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug
701  * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv
702  * @system_pm_mode: the system-wide power management mode in use.
703  *	This mode is set dynamically, depending on the WoWLAN values
704  *	configured from the userspace at runtime.
705  * @runtime_pm_mode: the runtime power management mode in use.  This
706  *	mode is set during the initialization phase and is not
707  *	supposed to change during runtime.
708  */
709 struct iwl_trans {
710 	const struct iwl_trans_ops *ops;
711 	struct iwl_op_mode *op_mode;
712 	const struct iwl_cfg *cfg;
713 	struct iwl_drv *drv;
714 	enum iwl_trans_state state;
715 	unsigned long status;
716 
717 	struct device *dev;
718 	u32 max_skb_frags;
719 	u32 hw_rev;
720 	u32 hw_rf_id;
721 	u32 hw_id;
722 	char hw_id_str[52];
723 
724 	u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
725 
726 	bool pm_support;
727 	bool ltr_enabled;
728 
729 	const struct iwl_hcmd_arr *command_groups;
730 	int command_groups_size;
731 	bool wide_cmd_header;
732 
733 	u8 num_rx_queues;
734 
735 	/* The following fields are internal only */
736 	struct kmem_cache *dev_cmd_pool;
737 	char dev_cmd_pool_name[50];
738 
739 	struct dentry *dbgfs_dir;
740 
741 #ifdef CONFIG_LOCKDEP
742 	struct lockdep_map sync_cmd_lockdep_map;
743 #endif
744 
745 	const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv;
746 	const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX];
747 	struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv;
748 	u8 dbg_dest_reg_num;
749 
750 	enum iwl_plat_pm_mode system_pm_mode;
751 	enum iwl_plat_pm_mode runtime_pm_mode;
752 	bool suspending;
753 
754 	/* pointer to trans specific struct */
755 	/*Ensure that this pointer will always be aligned to sizeof pointer */
756 	char trans_specific[0] __aligned(sizeof(void *));
757 };
758 
759 const char *iwl_get_cmd_string(struct iwl_trans *trans, u32 id);
760 int iwl_cmd_groups_verify_sorted(const struct iwl_trans_config *trans);
761 
762 static inline void iwl_trans_configure(struct iwl_trans *trans,
763 				       const struct iwl_trans_config *trans_cfg)
764 {
765 	trans->op_mode = trans_cfg->op_mode;
766 
767 	trans->ops->configure(trans, trans_cfg);
768 	WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg));
769 }
770 
771 static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power)
772 {
773 	might_sleep();
774 
775 	return trans->ops->start_hw(trans, low_power);
776 }
777 
778 static inline int iwl_trans_start_hw(struct iwl_trans *trans)
779 {
780 	return trans->ops->start_hw(trans, true);
781 }
782 
783 static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
784 {
785 	might_sleep();
786 
787 	if (trans->ops->op_mode_leave)
788 		trans->ops->op_mode_leave(trans);
789 
790 	trans->op_mode = NULL;
791 
792 	trans->state = IWL_TRANS_NO_FW;
793 }
794 
795 static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr)
796 {
797 	might_sleep();
798 
799 	trans->state = IWL_TRANS_FW_ALIVE;
800 
801 	trans->ops->fw_alive(trans, scd_addr);
802 }
803 
804 static inline int iwl_trans_start_fw(struct iwl_trans *trans,
805 				     const struct fw_img *fw,
806 				     bool run_in_rfkill)
807 {
808 	might_sleep();
809 
810 	WARN_ON_ONCE(!trans->rx_mpdu_cmd);
811 
812 	clear_bit(STATUS_FW_ERROR, &trans->status);
813 	return trans->ops->start_fw(trans, fw, run_in_rfkill);
814 }
815 
816 static inline void _iwl_trans_stop_device(struct iwl_trans *trans,
817 					  bool low_power)
818 {
819 	might_sleep();
820 
821 	trans->ops->stop_device(trans, low_power);
822 
823 	trans->state = IWL_TRANS_NO_FW;
824 }
825 
826 static inline void iwl_trans_stop_device(struct iwl_trans *trans)
827 {
828 	_iwl_trans_stop_device(trans, true);
829 }
830 
831 static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test,
832 					bool reset)
833 {
834 	might_sleep();
835 	if (trans->ops->d3_suspend)
836 		trans->ops->d3_suspend(trans, test, reset);
837 }
838 
839 static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
840 				      enum iwl_d3_status *status,
841 				      bool test, bool reset)
842 {
843 	might_sleep();
844 	if (!trans->ops->d3_resume)
845 		return 0;
846 
847 	return trans->ops->d3_resume(trans, status, test, reset);
848 }
849 
850 static inline int iwl_trans_suspend(struct iwl_trans *trans)
851 {
852 	if (!trans->ops->suspend)
853 		return 0;
854 
855 	return trans->ops->suspend(trans);
856 }
857 
858 static inline void iwl_trans_resume(struct iwl_trans *trans)
859 {
860 	if (trans->ops->resume)
861 		trans->ops->resume(trans);
862 }
863 
864 static inline struct iwl_trans_dump_data *
865 iwl_trans_dump_data(struct iwl_trans *trans,
866 		    const struct iwl_fw_dbg_trigger_tlv *trigger)
867 {
868 	if (!trans->ops->dump_data)
869 		return NULL;
870 	return trans->ops->dump_data(trans, trigger);
871 }
872 
873 static inline void iwl_trans_dump_regs(struct iwl_trans *trans)
874 {
875 	if (trans->ops->dump_regs)
876 		trans->ops->dump_regs(trans);
877 }
878 
879 static inline struct iwl_device_cmd *
880 iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
881 {
882 	return kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC);
883 }
884 
885 int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
886 
887 static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
888 					 struct iwl_device_cmd *dev_cmd)
889 {
890 	kmem_cache_free(trans->dev_cmd_pool, dev_cmd);
891 }
892 
893 static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
894 			       struct iwl_device_cmd *dev_cmd, int queue)
895 {
896 	if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
897 		return -EIO;
898 
899 	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
900 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
901 		return -EIO;
902 	}
903 
904 	return trans->ops->tx(trans, skb, dev_cmd, queue);
905 }
906 
907 static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
908 				     int ssn, struct sk_buff_head *skbs)
909 {
910 	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
911 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
912 		return;
913 	}
914 
915 	trans->ops->reclaim(trans, queue, ssn, skbs);
916 }
917 
918 static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue,
919 					 bool configure_scd)
920 {
921 	trans->ops->txq_disable(trans, queue, configure_scd);
922 }
923 
924 static inline bool
925 iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn,
926 			 const struct iwl_trans_txq_scd_cfg *cfg,
927 			 unsigned int queue_wdg_timeout)
928 {
929 	might_sleep();
930 
931 	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
932 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
933 		return false;
934 	}
935 
936 	return trans->ops->txq_enable(trans, queue, ssn,
937 				      cfg, queue_wdg_timeout);
938 }
939 
940 static inline void
941 iwl_trans_txq_free(struct iwl_trans *trans, int queue)
942 {
943 	if (WARN_ON_ONCE(!trans->ops->txq_free))
944 		return;
945 
946 	trans->ops->txq_free(trans, queue);
947 }
948 
949 static inline int
950 iwl_trans_txq_alloc(struct iwl_trans *trans,
951 		    struct iwl_tx_queue_cfg_cmd *cmd,
952 		    int cmd_id,
953 		    unsigned int queue_wdg_timeout)
954 {
955 	might_sleep();
956 
957 	if (WARN_ON_ONCE(!trans->ops->txq_alloc))
958 		return -ENOTSUPP;
959 
960 	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
961 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
962 		return -EIO;
963 	}
964 
965 	return trans->ops->txq_alloc(trans, cmd, cmd_id, queue_wdg_timeout);
966 }
967 
968 static inline void iwl_trans_txq_set_shared_mode(struct iwl_trans *trans,
969 						 int queue, bool shared_mode)
970 {
971 	if (trans->ops->txq_set_shared_mode)
972 		trans->ops->txq_set_shared_mode(trans, queue, shared_mode);
973 }
974 
975 static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
976 					int fifo, int sta_id, int tid,
977 					int frame_limit, u16 ssn,
978 					unsigned int queue_wdg_timeout)
979 {
980 	struct iwl_trans_txq_scd_cfg cfg = {
981 		.fifo = fifo,
982 		.sta_id = sta_id,
983 		.tid = tid,
984 		.frame_limit = frame_limit,
985 		.aggregate = sta_id >= 0,
986 	};
987 
988 	iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout);
989 }
990 
991 static inline
992 void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo,
993 			     unsigned int queue_wdg_timeout)
994 {
995 	struct iwl_trans_txq_scd_cfg cfg = {
996 		.fifo = fifo,
997 		.sta_id = -1,
998 		.tid = IWL_MAX_TID_COUNT,
999 		.frame_limit = IWL_FRAME_LIMIT,
1000 		.aggregate = false,
1001 	};
1002 
1003 	iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout);
1004 }
1005 
1006 static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans,
1007 					      unsigned long txqs,
1008 					      bool freeze)
1009 {
1010 	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1011 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1012 		return;
1013 	}
1014 
1015 	if (trans->ops->freeze_txq_timer)
1016 		trans->ops->freeze_txq_timer(trans, txqs, freeze);
1017 }
1018 
1019 static inline void iwl_trans_block_txq_ptrs(struct iwl_trans *trans,
1020 					    bool block)
1021 {
1022 	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1023 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1024 		return;
1025 	}
1026 
1027 	if (trans->ops->block_txq_ptrs)
1028 		trans->ops->block_txq_ptrs(trans, block);
1029 }
1030 
1031 static inline int iwl_trans_wait_tx_queues_empty(struct iwl_trans *trans,
1032 						 u32 txqs)
1033 {
1034 	if (WARN_ON_ONCE(!trans->ops->wait_tx_queues_empty))
1035 		return -ENOTSUPP;
1036 
1037 	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1038 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1039 		return -EIO;
1040 	}
1041 
1042 	return trans->ops->wait_tx_queues_empty(trans, txqs);
1043 }
1044 
1045 static inline int iwl_trans_wait_txq_empty(struct iwl_trans *trans, int queue)
1046 {
1047 	if (WARN_ON_ONCE(!trans->ops->wait_txq_empty))
1048 		return -ENOTSUPP;
1049 
1050 	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1051 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1052 		return -EIO;
1053 	}
1054 
1055 	return trans->ops->wait_txq_empty(trans, queue);
1056 }
1057 
1058 static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val)
1059 {
1060 	trans->ops->write8(trans, ofs, val);
1061 }
1062 
1063 static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val)
1064 {
1065 	trans->ops->write32(trans, ofs, val);
1066 }
1067 
1068 static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs)
1069 {
1070 	return trans->ops->read32(trans, ofs);
1071 }
1072 
1073 static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs)
1074 {
1075 	return trans->ops->read_prph(trans, ofs);
1076 }
1077 
1078 static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs,
1079 					u32 val)
1080 {
1081 	return trans->ops->write_prph(trans, ofs, val);
1082 }
1083 
1084 static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr,
1085 				     void *buf, int dwords)
1086 {
1087 	return trans->ops->read_mem(trans, addr, buf, dwords);
1088 }
1089 
1090 #define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize)		      \
1091 	do {								      \
1092 		if (__builtin_constant_p(bufsize))			      \
1093 			BUILD_BUG_ON((bufsize) % sizeof(u32));		      \
1094 		iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\
1095 	} while (0)
1096 
1097 static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr)
1098 {
1099 	u32 value;
1100 
1101 	if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1)))
1102 		return 0xa5a5a5a5;
1103 
1104 	return value;
1105 }
1106 
1107 static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr,
1108 				      const void *buf, int dwords)
1109 {
1110 	return trans->ops->write_mem(trans, addr, buf, dwords);
1111 }
1112 
1113 static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
1114 					u32 val)
1115 {
1116 	return iwl_trans_write_mem(trans, addr, &val, 1);
1117 }
1118 
1119 static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
1120 {
1121 	if (trans->ops->set_pmi)
1122 		trans->ops->set_pmi(trans, state);
1123 }
1124 
1125 static inline void
1126 iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
1127 {
1128 	trans->ops->set_bits_mask(trans, reg, mask, value);
1129 }
1130 
1131 #define iwl_trans_grab_nic_access(trans, flags)	\
1132 	__cond_lock(nic_access,				\
1133 		    likely((trans)->ops->grab_nic_access(trans, flags)))
1134 
1135 static inline void __releases(nic_access)
1136 iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags)
1137 {
1138 	trans->ops->release_nic_access(trans, flags);
1139 	__release(nic_access);
1140 }
1141 
1142 static inline void iwl_trans_fw_error(struct iwl_trans *trans)
1143 {
1144 	if (WARN_ON_ONCE(!trans->op_mode))
1145 		return;
1146 
1147 	/* prevent double restarts due to the same erroneous FW */
1148 	if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
1149 		iwl_op_mode_nic_error(trans->op_mode);
1150 }
1151 
1152 /*****************************************************
1153  * transport helper functions
1154  *****************************************************/
1155 struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
1156 				  struct device *dev,
1157 				  const struct iwl_cfg *cfg,
1158 				  const struct iwl_trans_ops *ops);
1159 void iwl_trans_free(struct iwl_trans *trans);
1160 void iwl_trans_ref(struct iwl_trans *trans);
1161 void iwl_trans_unref(struct iwl_trans *trans);
1162 
1163 /*****************************************************
1164 * driver (transport) register/unregister functions
1165 ******************************************************/
1166 int __must_check iwl_pci_register_driver(void);
1167 void iwl_pci_unregister_driver(void);
1168 
1169 #endif /* __iwl_trans_h__ */
1170