1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
9  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
10  * Copyright(c) 2015        Intel Deutschland GmbH
11  * Copyright(c) 2018 - 2019 Intel Corporation
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of version 2 of the GNU General Public License as
15  * published by the Free Software Foundation.
16  *
17  * This program is distributed in the hope that it will be useful, but
18  * WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
20  * General Public License for more details.
21  *
22  * The full GNU General Public License is included in this distribution
23  * in the file called COPYING.
24  *
25  * Contact Information:
26  *  Intel Linux Wireless <linuxwifi@intel.com>
27  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28  *
29  * BSD LICENSE
30  *
31  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
32  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
33  * Copyright(c) 2015        Intel Deutschland GmbH
34  * Copyright(c) 2018 - 2019 Intel Corporation
35  * All rights reserved.
36  *
37  * Redistribution and use in source and binary forms, with or without
38  * modification, are permitted provided that the following conditions
39  * are met:
40  *
41  *  * Redistributions of source code must retain the above copyright
42  *    notice, this list of conditions and the following disclaimer.
43  *  * Redistributions in binary form must reproduce the above copyright
44  *    notice, this list of conditions and the following disclaimer in
45  *    the documentation and/or other materials provided with the
46  *    distribution.
47  *  * Neither the name Intel Corporation nor the names of its
48  *    contributors may be used to endorse or promote products derived
49  *    from this software without specific prior written permission.
50  *
51  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
52  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
53  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
54  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
55  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
56  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
57  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
58  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
59  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
60  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
61  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
62  *
63  *****************************************************************************/
64 #ifndef __iwl_op_mode_h__
65 #define __iwl_op_mode_h__
66 
67 #include <linux/netdevice.h>
68 #include <linux/debugfs.h>
69 
70 struct iwl_op_mode;
71 struct iwl_trans;
72 struct sk_buff;
73 struct iwl_device_cmd;
74 struct iwl_rx_cmd_buffer;
75 struct iwl_fw;
76 struct iwl_cfg;
77 
78 /**
79  * DOC: Operational mode - what is it ?
80  *
81  * The operational mode (a.k.a. op_mode) is the layer that implements
82  * mac80211's handlers. It knows two APIs: mac80211's and the fw's. It uses
83  * the transport API to access the HW. The op_mode doesn't need to know how the
84  * underlying HW works, since the transport layer takes care of that.
85  *
86  * There can be several op_mode: i.e. different fw APIs will require two
87  * different op_modes. This is why the op_mode is virtualized.
88  */
89 
90 /**
91  * DOC: Life cycle of the Operational mode
92  *
93  * The operational mode has a very simple life cycle.
94  *
95  *	1) The driver layer (iwl-drv.c) chooses the op_mode based on the
96  *	   capabilities advertised by the fw file (in TLV format).
97  *	2) The driver layer starts the op_mode (ops->start)
98  *	3) The op_mode registers mac80211
99  *	4) The op_mode is governed by mac80211
100  *	5) The driver layer stops the op_mode
101  */
102 
103 /**
104  * struct iwl_op_mode_ops - op_mode specific operations
105  *
106  * The op_mode exports its ops so that external components can start it and
107  * interact with it. The driver layer typically calls the start and stop
108  * handlers, the transport layer calls the others.
109  *
110  * All the handlers MUST be implemented, except @rx_rss which can be left
111  * out *iff* the opmode will never run on hardware with multi-queue capability.
112  *
113  * @start: start the op_mode. The transport layer is already allocated.
114  *	May sleep
115  * @stop: stop the op_mode. Must free all the memory allocated.
116  *	May sleep
117  * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the
118  *	HCMD this Rx responds to. Can't sleep.
119  * @rx_rss: data queue RX notification to the op_mode, for (data) notifications
120  *	received on the RSS queue(s). The queue parameter indicates which of the
121  *	RSS queues received this frame; it will always be non-zero.
122  *	This method must not sleep.
123  * @async_cb: called when an ASYNC command with CMD_WANT_ASYNC_CALLBACK set
124  *	completes. Must be atomic.
125  * @queue_full: notifies that a HW queue is full.
126  *	Must be atomic and called with BH disabled.
127  * @queue_not_full: notifies that a HW queue is not full any more.
128  *	Must be atomic and called with BH disabled.
129  * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that
130  *	the radio is killed. Return %true if the device should be stopped by
131  *	the transport immediately after the call. May sleep.
132  * @free_skb: allows the transport layer to free skbs that haven't been
133  *	reclaimed by the op_mode. This can happen when the driver is freed and
134  *	there are Tx packets pending in the transport layer.
135  *	Must be atomic
136  * @nic_error: error notification. Must be atomic and must be called with BH
137  *	disabled.
138  * @cmd_queue_full: Called when the command queue gets full. Must be atomic and
139  *	called with BH disabled.
140  * @nic_config: configure NIC, called before firmware is started.
141  *	May sleep
142  * @wimax_active: invoked when WiMax becomes active. May sleep
143  */
144 struct iwl_op_mode_ops {
145 	struct iwl_op_mode *(*start)(struct iwl_trans *trans,
146 				     const struct iwl_cfg *cfg,
147 				     const struct iwl_fw *fw,
148 				     struct dentry *dbgfs_dir);
149 	void (*stop)(struct iwl_op_mode *op_mode);
150 	void (*rx)(struct iwl_op_mode *op_mode, struct napi_struct *napi,
151 		   struct iwl_rx_cmd_buffer *rxb);
152 	void (*rx_rss)(struct iwl_op_mode *op_mode, struct napi_struct *napi,
153 		       struct iwl_rx_cmd_buffer *rxb, unsigned int queue);
154 	void (*async_cb)(struct iwl_op_mode *op_mode,
155 			 const struct iwl_device_cmd *cmd);
156 	void (*queue_full)(struct iwl_op_mode *op_mode, int queue);
157 	void (*queue_not_full)(struct iwl_op_mode *op_mode, int queue);
158 	bool (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state);
159 	void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb);
160 	void (*nic_error)(struct iwl_op_mode *op_mode);
161 	void (*cmd_queue_full)(struct iwl_op_mode *op_mode);
162 	void (*nic_config)(struct iwl_op_mode *op_mode);
163 	void (*wimax_active)(struct iwl_op_mode *op_mode);
164 };
165 
166 int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops);
167 void iwl_opmode_deregister(const char *name);
168 
169 /**
170  * struct iwl_op_mode - operational mode
171  * @ops: pointer to its own ops
172  *
173  * This holds an implementation of the mac80211 / fw API.
174  */
175 struct iwl_op_mode {
176 	const struct iwl_op_mode_ops *ops;
177 
178 	char op_mode_specific[] __aligned(sizeof(void *));
179 };
180 
181 static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode)
182 {
183 	might_sleep();
184 	op_mode->ops->stop(op_mode);
185 }
186 
187 static inline void iwl_op_mode_rx(struct iwl_op_mode *op_mode,
188 				  struct napi_struct *napi,
189 				  struct iwl_rx_cmd_buffer *rxb)
190 {
191 	return op_mode->ops->rx(op_mode, napi, rxb);
192 }
193 
194 static inline void iwl_op_mode_rx_rss(struct iwl_op_mode *op_mode,
195 				      struct napi_struct *napi,
196 				      struct iwl_rx_cmd_buffer *rxb,
197 				      unsigned int queue)
198 {
199 	op_mode->ops->rx_rss(op_mode, napi, rxb, queue);
200 }
201 
202 static inline void iwl_op_mode_async_cb(struct iwl_op_mode *op_mode,
203 					const struct iwl_device_cmd *cmd)
204 {
205 	if (op_mode->ops->async_cb)
206 		op_mode->ops->async_cb(op_mode, cmd);
207 }
208 
209 static inline void iwl_op_mode_queue_full(struct iwl_op_mode *op_mode,
210 					  int queue)
211 {
212 	op_mode->ops->queue_full(op_mode, queue);
213 }
214 
215 static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode,
216 					      int queue)
217 {
218 	op_mode->ops->queue_not_full(op_mode, queue);
219 }
220 
221 static inline bool __must_check
222 iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state)
223 {
224 	might_sleep();
225 	return op_mode->ops->hw_rf_kill(op_mode, state);
226 }
227 
228 static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode,
229 					struct sk_buff *skb)
230 {
231 	op_mode->ops->free_skb(op_mode, skb);
232 }
233 
234 static inline void iwl_op_mode_nic_error(struct iwl_op_mode *op_mode)
235 {
236 	op_mode->ops->nic_error(op_mode);
237 }
238 
239 static inline void iwl_op_mode_cmd_queue_full(struct iwl_op_mode *op_mode)
240 {
241 	op_mode->ops->cmd_queue_full(op_mode);
242 }
243 
244 static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode)
245 {
246 	might_sleep();
247 	op_mode->ops->nic_config(op_mode);
248 }
249 
250 static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode)
251 {
252 	might_sleep();
253 	op_mode->ops->wimax_active(op_mode);
254 }
255 
256 #endif /* __iwl_op_mode_h__ */
257