1 /****************************************************************************** 2 * 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * GPL LICENSE SUMMARY 7 * 8 * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. 9 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 10 * Copyright(c) 2015 Intel Deutschland GmbH 11 * Copyright(c) 2018 - 2019 Intel Corporation 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of version 2 of the GNU General Public License as 15 * published by the Free Software Foundation. 16 * 17 * This program is distributed in the hope that it will be useful, but 18 * WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 20 * General Public License for more details. 21 * 22 * The full GNU General Public License is included in this distribution 23 * in the file called COPYING. 24 * 25 * Contact Information: 26 * Intel Linux Wireless <linuxwifi@intel.com> 27 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 28 * 29 * BSD LICENSE 30 * 31 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. 32 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 33 * Copyright(c) 2015 Intel Deutschland GmbH 34 * Copyright(c) 2018 - 2019 Intel Corporation 35 * All rights reserved. 36 * 37 * Redistribution and use in source and binary forms, with or without 38 * modification, are permitted provided that the following conditions 39 * are met: 40 * 41 * * Redistributions of source code must retain the above copyright 42 * notice, this list of conditions and the following disclaimer. 43 * * Redistributions in binary form must reproduce the above copyright 44 * notice, this list of conditions and the following disclaimer in 45 * the documentation and/or other materials provided with the 46 * distribution. 47 * * Neither the name Intel Corporation nor the names of its 48 * contributors may be used to endorse or promote products derived 49 * from this software without specific prior written permission. 50 * 51 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 52 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 53 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 54 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 55 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 56 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 57 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 58 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 59 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 60 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 61 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 62 * 63 *****************************************************************************/ 64 #ifndef __iwl_op_mode_h__ 65 #define __iwl_op_mode_h__ 66 67 #include <linux/netdevice.h> 68 #include <linux/debugfs.h> 69 70 struct iwl_op_mode; 71 struct iwl_trans; 72 struct sk_buff; 73 struct iwl_device_cmd; 74 struct iwl_rx_cmd_buffer; 75 struct iwl_fw; 76 struct iwl_cfg; 77 78 /** 79 * DOC: Operational mode - what is it ? 80 * 81 * The operational mode (a.k.a. op_mode) is the layer that implements 82 * mac80211's handlers. It knows two APIs: mac80211's and the fw's. It uses 83 * the transport API to access the HW. The op_mode doesn't need to know how the 84 * underlying HW works, since the transport layer takes care of that. 85 * 86 * There can be several op_mode: i.e. different fw APIs will require two 87 * different op_modes. This is why the op_mode is virtualized. 88 */ 89 90 /** 91 * DOC: Life cycle of the Operational mode 92 * 93 * The operational mode has a very simple life cycle. 94 * 95 * 1) The driver layer (iwl-drv.c) chooses the op_mode based on the 96 * capabilities advertised by the fw file (in TLV format). 97 * 2) The driver layer starts the op_mode (ops->start) 98 * 3) The op_mode registers mac80211 99 * 4) The op_mode is governed by mac80211 100 * 5) The driver layer stops the op_mode 101 */ 102 103 /** 104 * struct iwl_op_mode_ops - op_mode specific operations 105 * 106 * The op_mode exports its ops so that external components can start it and 107 * interact with it. The driver layer typically calls the start and stop 108 * handlers, the transport layer calls the others. 109 * 110 * All the handlers MUST be implemented, except @rx_rss which can be left 111 * out *iff* the opmode will never run on hardware with multi-queue capability. 112 * 113 * @start: start the op_mode. The transport layer is already allocated. 114 * May sleep 115 * @stop: stop the op_mode. Must free all the memory allocated. 116 * May sleep 117 * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the 118 * HCMD this Rx responds to. Can't sleep. 119 * @rx_rss: data queue RX notification to the op_mode, for (data) notifications 120 * received on the RSS queue(s). The queue parameter indicates which of the 121 * RSS queues received this frame; it will always be non-zero. 122 * This method must not sleep. 123 * @async_cb: called when an ASYNC command with CMD_WANT_ASYNC_CALLBACK set 124 * completes. Must be atomic. 125 * @queue_full: notifies that a HW queue is full. 126 * Must be atomic and called with BH disabled. 127 * @queue_not_full: notifies that a HW queue is not full any more. 128 * Must be atomic and called with BH disabled. 129 * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that 130 * the radio is killed. Return %true if the device should be stopped by 131 * the transport immediately after the call. May sleep. 132 * @free_skb: allows the transport layer to free skbs that haven't been 133 * reclaimed by the op_mode. This can happen when the driver is freed and 134 * there are Tx packets pending in the transport layer. 135 * Must be atomic 136 * @nic_error: error notification. Must be atomic and must be called with BH 137 * disabled. 138 * @cmd_queue_full: Called when the command queue gets full. Must be atomic and 139 * called with BH disabled. 140 * @nic_config: configure NIC, called before firmware is started. 141 * May sleep 142 * @wimax_active: invoked when WiMax becomes active. May sleep 143 */ 144 struct iwl_op_mode_ops { 145 struct iwl_op_mode *(*start)(struct iwl_trans *trans, 146 const struct iwl_cfg *cfg, 147 const struct iwl_fw *fw, 148 struct dentry *dbgfs_dir); 149 void (*stop)(struct iwl_op_mode *op_mode); 150 void (*rx)(struct iwl_op_mode *op_mode, struct napi_struct *napi, 151 struct iwl_rx_cmd_buffer *rxb); 152 void (*rx_rss)(struct iwl_op_mode *op_mode, struct napi_struct *napi, 153 struct iwl_rx_cmd_buffer *rxb, unsigned int queue); 154 void (*async_cb)(struct iwl_op_mode *op_mode, 155 const struct iwl_device_cmd *cmd); 156 void (*queue_full)(struct iwl_op_mode *op_mode, int queue); 157 void (*queue_not_full)(struct iwl_op_mode *op_mode, int queue); 158 bool (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state); 159 void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb); 160 void (*nic_error)(struct iwl_op_mode *op_mode); 161 void (*cmd_queue_full)(struct iwl_op_mode *op_mode); 162 void (*nic_config)(struct iwl_op_mode *op_mode); 163 void (*wimax_active)(struct iwl_op_mode *op_mode); 164 }; 165 166 int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops); 167 void iwl_opmode_deregister(const char *name); 168 169 /** 170 * struct iwl_op_mode - operational mode 171 * @ops: pointer to its own ops 172 * 173 * This holds an implementation of the mac80211 / fw API. 174 */ 175 struct iwl_op_mode { 176 const struct iwl_op_mode_ops *ops; 177 178 char op_mode_specific[] __aligned(sizeof(void *)); 179 }; 180 181 static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode) 182 { 183 might_sleep(); 184 op_mode->ops->stop(op_mode); 185 } 186 187 static inline void iwl_op_mode_rx(struct iwl_op_mode *op_mode, 188 struct napi_struct *napi, 189 struct iwl_rx_cmd_buffer *rxb) 190 { 191 return op_mode->ops->rx(op_mode, napi, rxb); 192 } 193 194 static inline void iwl_op_mode_rx_rss(struct iwl_op_mode *op_mode, 195 struct napi_struct *napi, 196 struct iwl_rx_cmd_buffer *rxb, 197 unsigned int queue) 198 { 199 op_mode->ops->rx_rss(op_mode, napi, rxb, queue); 200 } 201 202 static inline void iwl_op_mode_async_cb(struct iwl_op_mode *op_mode, 203 const struct iwl_device_cmd *cmd) 204 { 205 if (op_mode->ops->async_cb) 206 op_mode->ops->async_cb(op_mode, cmd); 207 } 208 209 static inline void iwl_op_mode_queue_full(struct iwl_op_mode *op_mode, 210 int queue) 211 { 212 op_mode->ops->queue_full(op_mode, queue); 213 } 214 215 static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode, 216 int queue) 217 { 218 op_mode->ops->queue_not_full(op_mode, queue); 219 } 220 221 static inline bool __must_check 222 iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state) 223 { 224 might_sleep(); 225 return op_mode->ops->hw_rf_kill(op_mode, state); 226 } 227 228 static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode, 229 struct sk_buff *skb) 230 { 231 op_mode->ops->free_skb(op_mode, skb); 232 } 233 234 static inline void iwl_op_mode_nic_error(struct iwl_op_mode *op_mode) 235 { 236 op_mode->ops->nic_error(op_mode); 237 } 238 239 static inline void iwl_op_mode_cmd_queue_full(struct iwl_op_mode *op_mode) 240 { 241 op_mode->ops->cmd_queue_full(op_mode); 242 } 243 244 static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode) 245 { 246 might_sleep(); 247 op_mode->ops->nic_config(op_mode); 248 } 249 250 static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode) 251 { 252 might_sleep(); 253 op_mode->ops->wimax_active(op_mode); 254 } 255 256 #endif /* __iwl_op_mode_h__ */ 257