1 /****************************************************************************** 2 * 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * GPL LICENSE SUMMARY 7 * 8 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. 9 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 10 * Copyright(c) 2016 Intel Deutschland GmbH 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of version 2 of the GNU General Public License as 14 * published by the Free Software Foundation. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 19 * General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, 24 * USA 25 * 26 * The full GNU General Public License is included in this distribution 27 * in the file called COPYING. 28 * 29 * Contact Information: 30 * Intel Linux Wireless <linuxwifi@intel.com> 31 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 32 * 33 * BSD LICENSE 34 * 35 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. 36 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH 37 * All rights reserved. 38 * 39 * Redistribution and use in source and binary forms, with or without 40 * modification, are permitted provided that the following conditions 41 * are met: 42 * 43 * * Redistributions of source code must retain the above copyright 44 * notice, this list of conditions and the following disclaimer. 45 * * Redistributions in binary form must reproduce the above copyright 46 * notice, this list of conditions and the following disclaimer in 47 * the documentation and/or other materials provided with the 48 * distribution. 49 * * Neither the name Intel Corporation nor the names of its 50 * contributors may be used to endorse or promote products derived 51 * from this software without specific prior written permission. 52 * 53 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 54 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 55 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 56 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 57 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 58 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 59 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 60 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 61 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 62 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 63 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 64 * 65 *****************************************************************************/ 66 #ifndef __iwl_csr_h__ 67 #define __iwl_csr_h__ 68 /* 69 * CSR (control and status registers) 70 * 71 * CSR registers are mapped directly into PCI bus space, and are accessible 72 * whenever platform supplies power to device, even when device is in 73 * low power states due to driver-invoked device resets 74 * (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes. 75 * 76 * Use iwl_write32() and iwl_read32() family to access these registers; 77 * these provide simple PCI bus access, without waking up the MAC. 78 * Do not use iwl_write_direct32() family for these registers; 79 * no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ. 80 * The MAC (uCode processor, etc.) does not need to be powered up for accessing 81 * the CSR registers. 82 * 83 * NOTE: Device does need to be awake in order to read this memory 84 * via CSR_EEPROM and CSR_OTP registers 85 */ 86 #define CSR_BASE (0x000) 87 88 #define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */ 89 #define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */ 90 #define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */ 91 #define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */ 92 #define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack*/ 93 #define CSR_GPIO_IN (CSR_BASE+0x018) /* read external chip pins */ 94 #define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/ 95 #define CSR_GP_CNTRL (CSR_BASE+0x024) 96 97 /* 2nd byte of CSR_INT_COALESCING, not accessible via iwl_write32()! */ 98 #define CSR_INT_PERIODIC_REG (CSR_BASE+0x005) 99 100 /* 101 * Hardware revision info 102 * Bit fields: 103 * 31-16: Reserved 104 * 15-4: Type of device: see CSR_HW_REV_TYPE_xxx definitions 105 * 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D 106 * 1-0: "Dash" (-) value, as in A-1, etc. 107 */ 108 #define CSR_HW_REV (CSR_BASE+0x028) 109 110 /* 111 * RF ID revision info 112 * Bit fields: 113 * 31:24: Reserved (set to 0x0) 114 * 23:12: Type 115 * 11:8: Step (A - 0x0, B - 0x1, etc) 116 * 7:4: Dash 117 * 3:0: Flavor 118 */ 119 #define CSR_HW_RF_ID (CSR_BASE+0x09c) 120 121 /* 122 * EEPROM and OTP (one-time-programmable) memory reads 123 * 124 * NOTE: Device must be awake, initialized via apm_ops.init(), 125 * in order to read. 126 */ 127 #define CSR_EEPROM_REG (CSR_BASE+0x02c) 128 #define CSR_EEPROM_GP (CSR_BASE+0x030) 129 #define CSR_OTP_GP_REG (CSR_BASE+0x034) 130 131 #define CSR_GIO_REG (CSR_BASE+0x03C) 132 #define CSR_GP_UCODE_REG (CSR_BASE+0x048) 133 #define CSR_GP_DRIVER_REG (CSR_BASE+0x050) 134 135 /* 136 * UCODE-DRIVER GP (general purpose) mailbox registers. 137 * SET/CLR registers set/clear bit(s) if "1" is written. 138 */ 139 #define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054) 140 #define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058) 141 #define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c) 142 #define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060) 143 144 #define CSR_MBOX_SET_REG (CSR_BASE + 0x88) 145 146 #define CSR_LED_REG (CSR_BASE+0x094) 147 #define CSR_DRAM_INT_TBL_REG (CSR_BASE+0x0A0) 148 #define CSR_MAC_SHADOW_REG_CTRL (CSR_BASE + 0x0A8) /* 6000 and up */ 149 #define CSR_MAC_SHADOW_REG_CTRL_RX_WAKE BIT(20) 150 #define CSR_MAC_SHADOW_REG_CTL2 (CSR_BASE + 0x0AC) 151 #define CSR_MAC_SHADOW_REG_CTL2_RX_WAKE 0xFFFF 152 153 /* GIO Chicken Bits (PCI Express bus link power management) */ 154 #define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) 155 156 /* host chicken bits */ 157 #define CSR_HOST_CHICKEN (CSR_BASE + 0x204) 158 #define CSR_HOST_CHICKEN_PM_IDLE_SRC_DIS_SB_PME BIT(19) 159 160 /* Analog phase-lock-loop configuration */ 161 #define CSR_ANA_PLL_CFG (CSR_BASE+0x20c) 162 163 /* 164 * CSR HW resources monitor registers 165 */ 166 #define CSR_MONITOR_CFG_REG (CSR_BASE+0x214) 167 #define CSR_MONITOR_STATUS_REG (CSR_BASE+0x228) 168 #define CSR_MONITOR_XTAL_RESOURCES (0x00000010) 169 170 /* 171 * CSR Hardware Revision Workaround Register. Indicates hardware rev; 172 * "step" determines CCK backoff for txpower calculation. Used for 4965 only. 173 * See also CSR_HW_REV register. 174 * Bit fields: 175 * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step 176 * 1-0: "Dash" (-) value, as in C-1, etc. 177 */ 178 #define CSR_HW_REV_WA_REG (CSR_BASE+0x22C) 179 180 #define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240) 181 #define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250) 182 183 /* Bits for CSR_HW_IF_CONFIG_REG */ 184 #define CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH (0x00000003) 185 #define CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP (0x0000000C) 186 #define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x000000C0) 187 #define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) 188 #define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) 189 #define CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE (0x00000C00) 190 #define CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH (0x00003000) 191 #define CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP (0x0000C000) 192 193 #define CSR_HW_IF_CONFIG_REG_POS_MAC_DASH (0) 194 #define CSR_HW_IF_CONFIG_REG_POS_MAC_STEP (2) 195 #define CSR_HW_IF_CONFIG_REG_POS_BOARD_VER (6) 196 #define CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE (10) 197 #define CSR_HW_IF_CONFIG_REG_POS_PHY_DASH (12) 198 #define CSR_HW_IF_CONFIG_REG_POS_PHY_STEP (14) 199 200 #define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) 201 #define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) 202 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */ 203 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */ 204 #define CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */ 205 #define CSR_HW_IF_CONFIG_REG_ENABLE_PME (0x10000000) 206 #define CSR_HW_IF_CONFIG_REG_PERSIST_MODE (0x40000000) /* PERSISTENCE */ 207 208 #define CSR_MBOX_SET_REG_OS_ALIVE BIT(5) 209 210 #define CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/ 211 #define CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/ 212 213 /* interrupt flags in INTA, set by uCode or hardware (e.g. dma), 214 * acknowledged (reset) by host writing "1" to flagged bits. */ 215 #define CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */ 216 #define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */ 217 #define CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */ 218 #define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */ 219 #define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */ 220 #define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */ 221 #define CSR_INT_BIT_PAGING (1 << 24) /* SDIO PAGING */ 222 #define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */ 223 #define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */ 224 #define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses */ 225 #define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */ 226 #define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */ 227 228 #define CSR_INI_SET_MASK (CSR_INT_BIT_FH_RX | \ 229 CSR_INT_BIT_HW_ERR | \ 230 CSR_INT_BIT_FH_TX | \ 231 CSR_INT_BIT_SW_ERR | \ 232 CSR_INT_BIT_PAGING | \ 233 CSR_INT_BIT_RF_KILL | \ 234 CSR_INT_BIT_SW_RX | \ 235 CSR_INT_BIT_WAKEUP | \ 236 CSR_INT_BIT_ALIVE | \ 237 CSR_INT_BIT_RX_PERIODIC) 238 239 /* interrupt flags in FH (flow handler) (PCI busmaster DMA) */ 240 #define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */ 241 #define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */ 242 #define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */ 243 #define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */ 244 #define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */ 245 #define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */ 246 247 #define CSR_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \ 248 CSR_FH_INT_BIT_RX_CHNL1 | \ 249 CSR_FH_INT_BIT_RX_CHNL0) 250 251 #define CSR_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \ 252 CSR_FH_INT_BIT_TX_CHNL0) 253 254 /* GPIO */ 255 #define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) 256 #define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) 257 #define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200) 258 259 /* RESET */ 260 #define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) 261 #define CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002) 262 #define CSR_RESET_REG_FLAG_SW_RESET (0x00000080) 263 #define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100) 264 #define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200) 265 #define CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000) 266 267 /* 268 * GP (general purpose) CONTROL REGISTER 269 * Bit fields: 270 * 27: HW_RF_KILL_SW 271 * Indicates state of (platform's) hardware RF-Kill switch 272 * 26-24: POWER_SAVE_TYPE 273 * Indicates current power-saving mode: 274 * 000 -- No power saving 275 * 001 -- MAC power-down 276 * 010 -- PHY (radio) power-down 277 * 011 -- Error 278 * 10: XTAL ON request 279 * 9-6: SYS_CONFIG 280 * Indicates current system configuration, reflecting pins on chip 281 * as forced high/low by device circuit board. 282 * 4: GOING_TO_SLEEP 283 * Indicates MAC is entering a power-saving sleep power-down. 284 * Not a good time to access device-internal resources. 285 * 3: MAC_ACCESS_REQ 286 * Host sets this to request and maintain MAC wakeup, to allow host 287 * access to device-internal resources. Host must wait for 288 * MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR 289 * device registers. 290 * 2: INIT_DONE 291 * Host sets this to put device into fully operational D0 power mode. 292 * Host resets this after SW_RESET to put device into low power mode. 293 * 0: MAC_CLOCK_READY 294 * Indicates MAC (ucode processor, etc.) is powered up and can run. 295 * Internal resources are accessible. 296 * NOTE: This does not indicate that the processor is actually running. 297 * NOTE: This does not indicate that device has completed 298 * init or post-power-down restore of internal SRAM memory. 299 * Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that 300 * SRAM is restored and uCode is in normal operation mode. 301 * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and 302 * do not need to save/restore it. 303 * NOTE: After device reset, this bit remains "0" until host sets 304 * INIT_DONE 305 */ 306 #define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001) 307 #define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004) 308 #define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008) 309 #define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010) 310 #define CSR_GP_CNTRL_REG_FLAG_XTAL_ON (0x00000400) 311 312 #define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001) 313 314 #define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000) 315 #define CSR_GP_CNTRL_REG_FLAG_RFKILL_WAKE_L1A_EN (0x04000000) 316 #define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) 317 318 319 /* HW REV */ 320 #define CSR_HW_REV_DASH(_val) (((_val) & 0x0000003) >> 0) 321 #define CSR_HW_REV_STEP(_val) (((_val) & 0x000000C) >> 2) 322 323 /* HW RFID */ 324 #define CSR_HW_RFID_FLAVOR(_val) (((_val) & 0x000000F) >> 0) 325 #define CSR_HW_RFID_DASH(_val) (((_val) & 0x00000F0) >> 4) 326 #define CSR_HW_RFID_STEP(_val) (((_val) & 0x0000F00) >> 8) 327 #define CSR_HW_RFID_TYPE(_val) (((_val) & 0x0FFF000) >> 12) 328 329 /** 330 * hw_rev values 331 */ 332 enum { 333 SILICON_A_STEP = 0, 334 SILICON_B_STEP, 335 SILICON_C_STEP, 336 }; 337 338 339 #define CSR_HW_REV_TYPE_MSK (0x000FFF0) 340 #define CSR_HW_REV_TYPE_5300 (0x0000020) 341 #define CSR_HW_REV_TYPE_5350 (0x0000030) 342 #define CSR_HW_REV_TYPE_5100 (0x0000050) 343 #define CSR_HW_REV_TYPE_5150 (0x0000040) 344 #define CSR_HW_REV_TYPE_1000 (0x0000060) 345 #define CSR_HW_REV_TYPE_6x00 (0x0000070) 346 #define CSR_HW_REV_TYPE_6x50 (0x0000080) 347 #define CSR_HW_REV_TYPE_6150 (0x0000084) 348 #define CSR_HW_REV_TYPE_6x05 (0x00000B0) 349 #define CSR_HW_REV_TYPE_6x30 CSR_HW_REV_TYPE_6x05 350 #define CSR_HW_REV_TYPE_6x35 CSR_HW_REV_TYPE_6x05 351 #define CSR_HW_REV_TYPE_2x30 (0x00000C0) 352 #define CSR_HW_REV_TYPE_2x00 (0x0000100) 353 #define CSR_HW_REV_TYPE_105 (0x0000110) 354 #define CSR_HW_REV_TYPE_135 (0x0000120) 355 #define CSR_HW_REV_TYPE_7265D (0x0000210) 356 #define CSR_HW_REV_TYPE_NONE (0x00001F0) 357 358 /* RF_ID value */ 359 #define CSR_HW_RF_ID_TYPE_JF (0x00105000) 360 #define CSR_HW_RF_ID_TYPE_HR (0x0010A000) 361 #define CSR_HW_RF_ID_TYPE_HRCDB (0x00109000) 362 363 /* EEPROM REG */ 364 #define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) 365 #define CSR_EEPROM_REG_BIT_CMD (0x00000002) 366 #define CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC) 367 #define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000) 368 369 /* EEPROM GP */ 370 #define CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */ 371 #define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) 372 #define CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP (0x00000000) 373 #define CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP (0x00000001) 374 #define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002) 375 #define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004) 376 377 /* One-time-programmable memory general purpose reg */ 378 #define CSR_OTP_GP_REG_DEVICE_SELECT (0x00010000) /* 0 - EEPROM, 1 - OTP */ 379 #define CSR_OTP_GP_REG_OTP_ACCESS_MODE (0x00020000) /* 0 - absolute, 1 - relative */ 380 #define CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK (0x00100000) /* bit 20 */ 381 #define CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK (0x00200000) /* bit 21 */ 382 383 /* GP REG */ 384 #define CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */ 385 #define CSR_GP_REG_NO_POWER_SAVE (0x00000000) 386 #define CSR_GP_REG_MAC_POWER_SAVE (0x01000000) 387 #define CSR_GP_REG_PHY_POWER_SAVE (0x02000000) 388 #define CSR_GP_REG_POWER_SAVE_ERROR (0x03000000) 389 390 391 /* CSR GIO */ 392 #define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002) 393 394 /* 395 * UCODE-DRIVER GP (general purpose) mailbox register 1 396 * Host driver and uCode write and/or read this register to communicate with 397 * each other. 398 * Bit fields: 399 * 4: UCODE_DISABLE 400 * Host sets this to request permanent halt of uCode, same as 401 * sending CARD_STATE command with "halt" bit set. 402 * 3: CT_KILL_EXIT 403 * Host sets this to request exit from CT_KILL state, i.e. host thinks 404 * device temperature is low enough to continue normal operation. 405 * 2: CMD_BLOCKED 406 * Host sets this during RF KILL power-down sequence (HW, SW, CT KILL) 407 * to release uCode to clear all Tx and command queues, enter 408 * unassociated mode, and power down. 409 * NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit. 410 * 1: SW_BIT_RFKILL 411 * Host sets this when issuing CARD_STATE command to request 412 * device sleep. 413 * 0: MAC_SLEEP 414 * uCode sets this when preparing a power-saving power-down. 415 * uCode resets this when power-up is complete and SRAM is sane. 416 * NOTE: device saves internal SRAM data to host when powering down, 417 * and must restore this data after powering back up. 418 * MAC_SLEEP is the best indication that restore is complete. 419 * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and 420 * do not need to save/restore it. 421 */ 422 #define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001) 423 #define CSR_UCODE_SW_BIT_RFKILL (0x00000002) 424 #define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) 425 #define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) 426 #define CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE (0x00000020) 427 428 /* GP Driver */ 429 #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_MSK (0x00000003) 430 #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_3x3_HYB (0x00000000) 431 #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB (0x00000001) 432 #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA (0x00000002) 433 #define CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6 (0x00000004) 434 #define CSR_GP_DRIVER_REG_BIT_6050_1x2 (0x00000008) 435 436 #define CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER (0x00000080) 437 438 /* GIO Chicken Bits (PCI Express bus link power management) */ 439 #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) 440 #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) 441 442 /* LED */ 443 #define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF) 444 #define CSR_LED_REG_TURN_ON (0x60) 445 #define CSR_LED_REG_TURN_OFF (0x20) 446 447 /* ANA_PLL */ 448 #define CSR50_ANA_PLL_CFG_VAL (0x00880300) 449 450 /* HPET MEM debug */ 451 #define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) 452 453 /* DRAM INT TABLE */ 454 #define CSR_DRAM_INT_TBL_ENABLE (1 << 31) 455 #define CSR_DRAM_INIT_TBL_WRITE_POINTER (1 << 28) 456 #define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27) 457 458 /* 459 * SHR target access (Shared block memory space) 460 * 461 * Shared internal registers can be accessed directly from PCI bus through SHR 462 * arbiter without need for the MAC HW to be powered up. This is possible due to 463 * indirect read/write via HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and 464 * HEEP_CTRL_WRD_PCIEX_DATA (0xF4) registers. 465 * 466 * Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW 467 * need not be powered up so no "grab inc access" is required. 468 */ 469 470 /* 471 * Registers for accessing shared registers (e.g. SHR_APMG_GP1, 472 * SHR_APMG_XTAL_CFG). For example, to read from SHR_APMG_GP1 register (0x1DC), 473 * first, write to the control register: 474 * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) 475 * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access) 476 * second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0]. 477 * 478 * To write the register, first, write to the data register 479 * HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then: 480 * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register) 481 * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access) 482 */ 483 #define HEEP_CTRL_WRD_PCIEX_CTRL_REG (CSR_BASE+0x0ec) 484 #define HEEP_CTRL_WRD_PCIEX_DATA_REG (CSR_BASE+0x0f4) 485 486 /* 487 * HBUS (Host-side Bus) 488 * 489 * HBUS registers are mapped directly into PCI bus space, but are used 490 * to indirectly access device's internal memory or registers that 491 * may be powered-down. 492 * 493 * Use iwl_write_direct32()/iwl_read_direct32() family for these registers; 494 * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ 495 * to make sure the MAC (uCode processor, etc.) is powered up for accessing 496 * internal resources. 497 * 498 * Do not use iwl_write32()/iwl_read32() family to access these registers; 499 * these provide only simple PCI bus access, without waking up the MAC. 500 */ 501 #define HBUS_BASE (0x400) 502 503 /* 504 * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM 505 * structures, error log, event log, verifying uCode load). 506 * First write to address register, then read from or write to data register 507 * to complete the job. Once the address register is set up, accesses to 508 * data registers auto-increment the address by one dword. 509 * Bit usage for address registers (read or write): 510 * 0-31: memory address within device 511 */ 512 #define HBUS_TARG_MEM_RADDR (HBUS_BASE+0x00c) 513 #define HBUS_TARG_MEM_WADDR (HBUS_BASE+0x010) 514 #define HBUS_TARG_MEM_WDAT (HBUS_BASE+0x018) 515 #define HBUS_TARG_MEM_RDAT (HBUS_BASE+0x01c) 516 517 /* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */ 518 #define HBUS_TARG_MBX_C (HBUS_BASE+0x030) 519 #define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004) 520 521 /* 522 * Registers for accessing device's internal peripheral registers 523 * (e.g. SCD, BSM, etc.). First write to address register, 524 * then read from or write to data register to complete the job. 525 * Bit usage for address registers (read or write): 526 * 0-15: register address (offset) within device 527 * 24-25: (# bytes - 1) to read or write (e.g. 3 for dword) 528 */ 529 #define HBUS_TARG_PRPH_WADDR (HBUS_BASE+0x044) 530 #define HBUS_TARG_PRPH_RADDR (HBUS_BASE+0x048) 531 #define HBUS_TARG_PRPH_WDAT (HBUS_BASE+0x04c) 532 #define HBUS_TARG_PRPH_RDAT (HBUS_BASE+0x050) 533 534 /* Used to enable DBGM */ 535 #define HBUS_TARG_TEST_REG (HBUS_BASE+0x05c) 536 537 /* 538 * Per-Tx-queue write pointer (index, really!) 539 * Indicates index to next TFD that driver will fill (1 past latest filled). 540 * Bit usage: 541 * 0-7: queue write index 542 * 11-8: queue selector 543 */ 544 #define HBUS_TARG_WRPTR (HBUS_BASE+0x060) 545 546 /********************************************************** 547 * CSR values 548 **********************************************************/ 549 /* 550 * host interrupt timeout value 551 * used with setting interrupt coalescing timer 552 * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit 553 * 554 * default interrupt coalescing timer is 64 x 32 = 2048 usecs 555 */ 556 #define IWL_HOST_INT_TIMEOUT_MAX (0xFF) 557 #define IWL_HOST_INT_TIMEOUT_DEF (0x40) 558 #define IWL_HOST_INT_TIMEOUT_MIN (0x0) 559 #define IWL_HOST_INT_OPER_MODE BIT(31) 560 561 /***************************************************************************** 562 * 7000/3000 series SHR DTS addresses * 563 *****************************************************************************/ 564 565 /* Diode Results Register Structure: */ 566 enum dtd_diode_reg { 567 DTS_DIODE_REG_DIG_VAL = 0x000000FF, /* bits [7:0] */ 568 DTS_DIODE_REG_VREF_LOW = 0x0000FF00, /* bits [15:8] */ 569 DTS_DIODE_REG_VREF_HIGH = 0x00FF0000, /* bits [23:16] */ 570 DTS_DIODE_REG_VREF_ID = 0x03000000, /* bits [25:24] */ 571 DTS_DIODE_REG_PASS_ONCE = 0x80000000, /* bits [31:31] */ 572 DTS_DIODE_REG_FLAGS_MSK = 0xFF000000, /* bits [31:24] */ 573 /* Those are the masks INSIDE the flags bit-field: */ 574 DTS_DIODE_REG_FLAGS_VREFS_ID_POS = 0, 575 DTS_DIODE_REG_FLAGS_VREFS_ID = 0x00000003, /* bits [1:0] */ 576 DTS_DIODE_REG_FLAGS_PASS_ONCE_POS = 7, 577 DTS_DIODE_REG_FLAGS_PASS_ONCE = 0x00000080, /* bits [7:7] */ 578 }; 579 580 /***************************************************************************** 581 * MSIX related registers * 582 *****************************************************************************/ 583 584 #define CSR_MSIX_BASE (0x2000) 585 #define CSR_MSIX_FH_INT_CAUSES_AD (CSR_MSIX_BASE + 0x800) 586 #define CSR_MSIX_FH_INT_MASK_AD (CSR_MSIX_BASE + 0x804) 587 #define CSR_MSIX_HW_INT_CAUSES_AD (CSR_MSIX_BASE + 0x808) 588 #define CSR_MSIX_HW_INT_MASK_AD (CSR_MSIX_BASE + 0x80C) 589 #define CSR_MSIX_AUTOMASK_ST_AD (CSR_MSIX_BASE + 0x810) 590 #define CSR_MSIX_RX_IVAR_AD_REG (CSR_MSIX_BASE + 0x880) 591 #define CSR_MSIX_IVAR_AD_REG (CSR_MSIX_BASE + 0x890) 592 #define CSR_MSIX_PENDING_PBA_AD (CSR_MSIX_BASE + 0x1000) 593 #define CSR_MSIX_RX_IVAR(cause) (CSR_MSIX_RX_IVAR_AD_REG + (cause)) 594 #define CSR_MSIX_IVAR(cause) (CSR_MSIX_IVAR_AD_REG + (cause)) 595 596 #define MSIX_FH_INT_CAUSES_Q(q) (q) 597 598 /* 599 * Causes for the FH register interrupts 600 */ 601 enum msix_fh_int_causes { 602 MSIX_FH_INT_CAUSES_Q0 = BIT(0), 603 MSIX_FH_INT_CAUSES_Q1 = BIT(1), 604 MSIX_FH_INT_CAUSES_D2S_CH0_NUM = BIT(16), 605 MSIX_FH_INT_CAUSES_D2S_CH1_NUM = BIT(17), 606 MSIX_FH_INT_CAUSES_S2D = BIT(19), 607 MSIX_FH_INT_CAUSES_FH_ERR = BIT(21), 608 }; 609 610 /* 611 * Causes for the HW register interrupts 612 */ 613 enum msix_hw_int_causes { 614 MSIX_HW_INT_CAUSES_REG_ALIVE = BIT(0), 615 MSIX_HW_INT_CAUSES_REG_WAKEUP = BIT(1), 616 MSIX_HW_INT_CAUSES_REG_CT_KILL = BIT(6), 617 MSIX_HW_INT_CAUSES_REG_RF_KILL = BIT(7), 618 MSIX_HW_INT_CAUSES_REG_PERIODIC = BIT(8), 619 MSIX_HW_INT_CAUSES_REG_SW_ERR = BIT(25), 620 MSIX_HW_INT_CAUSES_REG_SCD = BIT(26), 621 MSIX_HW_INT_CAUSES_REG_FH_TX = BIT(27), 622 MSIX_HW_INT_CAUSES_REG_HW_ERR = BIT(29), 623 MSIX_HW_INT_CAUSES_REG_HAP = BIT(30), 624 }; 625 626 #define MSIX_MIN_INTERRUPT_VECTORS 2 627 #define MSIX_AUTO_CLEAR_CAUSE 0 628 #define MSIX_NON_AUTO_CLEAR_CAUSE BIT(7) 629 630 /***************************************************************************** 631 * HW address related registers * 632 *****************************************************************************/ 633 634 #define CSR_ADDR_BASE (0x380) 635 #define CSR_MAC_ADDR0_OTP (CSR_ADDR_BASE) 636 #define CSR_MAC_ADDR1_OTP (CSR_ADDR_BASE + 4) 637 #define CSR_MAC_ADDR0_STRAP (CSR_ADDR_BASE + 8) 638 #define CSR_MAC_ADDR1_STRAP (CSR_ADDR_BASE + 0xC) 639 640 #endif /* !__iwl_csr_h__ */ 641