1 /****************************************************************************** 2 * 3 * GPL LICENSE SUMMARY 4 * 5 * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of version 2 of the GNU General Public License as 9 * published by the Free Software Foundation. 10 * 11 * This program is distributed in the hope that it will be useful, but 12 * WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, 19 * USA 20 * 21 * The full GNU General Public License is included in this distribution 22 * in the file called COPYING. 23 * 24 * Contact Information: 25 * Intel Linux Wireless <linuxwifi@intel.com> 26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 27 * 28 *****************************************************************************/ 29 #include <linux/etherdevice.h> 30 #include <linux/kernel.h> 31 #include <linux/module.h> 32 #include <linux/sched.h> 33 #include <net/mac80211.h> 34 35 #include "iwl-io.h" 36 #include "iwl-agn-hw.h" 37 #include "iwl-trans.h" 38 #include "iwl-modparams.h" 39 40 #include "dev.h" 41 #include "agn.h" 42 43 int iwlagn_hw_valid_rtc_data_addr(u32 addr) 44 { 45 return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) && 46 (addr < IWLAGN_RTC_DATA_UPPER_BOUND); 47 } 48 49 int iwlagn_send_tx_power(struct iwl_priv *priv) 50 { 51 struct iwlagn_tx_power_dbm_cmd tx_power_cmd; 52 u8 tx_ant_cfg_cmd; 53 54 if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), 55 "TX Power requested while scanning!\n")) 56 return -EAGAIN; 57 58 /* half dBm need to multiply */ 59 tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt); 60 61 if (tx_power_cmd.global_lmt > priv->nvm_data->max_tx_pwr_half_dbm) { 62 /* 63 * For the newer devices which using enhanced/extend tx power 64 * table in EEPROM, the format is in half dBm. driver need to 65 * convert to dBm format before report to mac80211. 66 * By doing so, there is a possibility of 1/2 dBm resolution 67 * lost. driver will perform "round-up" operation before 68 * reporting, but it will cause 1/2 dBm tx power over the 69 * regulatory limit. Perform the checking here, if the 70 * "tx_power_user_lmt" is higher than EEPROM value (in 71 * half-dBm format), lower the tx power based on EEPROM 72 */ 73 tx_power_cmd.global_lmt = 74 priv->nvm_data->max_tx_pwr_half_dbm; 75 } 76 tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED; 77 tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO; 78 79 if (IWL_UCODE_API(priv->fw->ucode_ver) == 1) 80 tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1; 81 else 82 tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD; 83 84 return iwl_dvm_send_cmd_pdu(priv, tx_ant_cfg_cmd, 0, 85 sizeof(tx_power_cmd), &tx_power_cmd); 86 } 87 88 void iwlagn_temperature(struct iwl_priv *priv) 89 { 90 lockdep_assert_held(&priv->statistics.lock); 91 92 /* store temperature from correct statistics (in Celsius) */ 93 priv->temperature = le32_to_cpu(priv->statistics.common.temperature); 94 iwl_tt_handler(priv); 95 } 96 97 int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum nl80211_band band) 98 { 99 int idx = 0; 100 int band_offset = 0; 101 102 /* HT rate format: mac80211 wants an MCS number, which is just LSB */ 103 if (rate_n_flags & RATE_MCS_HT_MSK) { 104 idx = (rate_n_flags & 0xff); 105 return idx; 106 /* Legacy rate format, search for match in table */ 107 } else { 108 if (band == NL80211_BAND_5GHZ) 109 band_offset = IWL_FIRST_OFDM_RATE; 110 for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) 111 if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) 112 return idx - band_offset; 113 } 114 115 return -1; 116 } 117 118 int iwlagn_manage_ibss_station(struct iwl_priv *priv, 119 struct ieee80211_vif *vif, bool add) 120 { 121 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; 122 123 if (add) 124 return iwlagn_add_bssid_station(priv, vif_priv->ctx, 125 vif->bss_conf.bssid, 126 &vif_priv->ibss_bssid_sta_id); 127 return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id, 128 vif->bss_conf.bssid); 129 } 130 131 /** 132 * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode 133 * 134 * pre-requirements: 135 * 1. acquire mutex before calling 136 * 2. make sure rf is on and not in exit state 137 */ 138 int iwlagn_txfifo_flush(struct iwl_priv *priv, u32 scd_q_msk) 139 { 140 struct iwl_txfifo_flush_cmd_v3 flush_cmd_v3 = { 141 .flush_control = cpu_to_le16(IWL_DROP_ALL), 142 }; 143 struct iwl_txfifo_flush_cmd_v2 flush_cmd_v2 = { 144 .flush_control = cpu_to_le16(IWL_DROP_ALL), 145 }; 146 147 u32 queue_control = IWL_SCD_VO_MSK | IWL_SCD_VI_MSK | 148 IWL_SCD_BE_MSK | IWL_SCD_BK_MSK | IWL_SCD_MGMT_MSK; 149 150 if ((priv->valid_contexts != BIT(IWL_RXON_CTX_BSS))) 151 queue_control |= IWL_PAN_SCD_VO_MSK | IWL_PAN_SCD_VI_MSK | 152 IWL_PAN_SCD_BE_MSK | IWL_PAN_SCD_BK_MSK | 153 IWL_PAN_SCD_MGMT_MSK | 154 IWL_PAN_SCD_MULTICAST_MSK; 155 156 if (priv->nvm_data->sku_cap_11n_enable) 157 queue_control |= IWL_AGG_TX_QUEUE_MSK; 158 159 if (scd_q_msk) 160 queue_control = scd_q_msk; 161 162 IWL_DEBUG_INFO(priv, "queue control: 0x%x\n", queue_control); 163 flush_cmd_v3.queue_control = cpu_to_le32(queue_control); 164 flush_cmd_v2.queue_control = cpu_to_le16((u16)queue_control); 165 166 if (IWL_UCODE_API(priv->fw->ucode_ver) > 2) 167 return iwl_dvm_send_cmd_pdu(priv, REPLY_TXFIFO_FLUSH, 0, 168 sizeof(flush_cmd_v3), 169 &flush_cmd_v3); 170 return iwl_dvm_send_cmd_pdu(priv, REPLY_TXFIFO_FLUSH, 0, 171 sizeof(flush_cmd_v2), &flush_cmd_v2); 172 } 173 174 void iwlagn_dev_txfifo_flush(struct iwl_priv *priv) 175 { 176 mutex_lock(&priv->mutex); 177 ieee80211_stop_queues(priv->hw); 178 if (iwlagn_txfifo_flush(priv, 0)) { 179 IWL_ERR(priv, "flush request fail\n"); 180 goto done; 181 } 182 IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n"); 183 iwl_trans_wait_tx_queue_empty(priv->trans, 0xffffffff); 184 done: 185 ieee80211_wake_queues(priv->hw); 186 mutex_unlock(&priv->mutex); 187 } 188 189 /* 190 * BT coex 191 */ 192 /* Notmal TDM */ 193 static const __le32 iwlagn_def_3w_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = { 194 cpu_to_le32(0xaaaaaaaa), 195 cpu_to_le32(0xaaaaaaaa), 196 cpu_to_le32(0xaeaaaaaa), 197 cpu_to_le32(0xaaaaaaaa), 198 cpu_to_le32(0xcc00ff28), 199 cpu_to_le32(0x0000aaaa), 200 cpu_to_le32(0xcc00aaaa), 201 cpu_to_le32(0x0000aaaa), 202 cpu_to_le32(0xc0004000), 203 cpu_to_le32(0x00004000), 204 cpu_to_le32(0xf0005000), 205 cpu_to_le32(0xf0005000), 206 }; 207 208 /* Full concurrency */ 209 static const __le32 iwlagn_concurrent_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = { 210 cpu_to_le32(0xaaaaaaaa), 211 cpu_to_le32(0xaaaaaaaa), 212 cpu_to_le32(0xaaaaaaaa), 213 cpu_to_le32(0xaaaaaaaa), 214 cpu_to_le32(0xaaaaaaaa), 215 cpu_to_le32(0xaaaaaaaa), 216 cpu_to_le32(0xaaaaaaaa), 217 cpu_to_le32(0xaaaaaaaa), 218 cpu_to_le32(0x00000000), 219 cpu_to_le32(0x00000000), 220 cpu_to_le32(0x00000000), 221 cpu_to_le32(0x00000000), 222 }; 223 224 void iwlagn_send_advance_bt_config(struct iwl_priv *priv) 225 { 226 struct iwl_basic_bt_cmd basic = { 227 .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT, 228 .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT, 229 .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT, 230 .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT, 231 }; 232 struct iwl_bt_cmd_v1 bt_cmd_v1; 233 struct iwl_bt_cmd_v2 bt_cmd_v2; 234 int ret; 235 236 BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) != 237 sizeof(basic.bt3_lookup_table)); 238 239 if (priv->lib->bt_params) { 240 /* 241 * newer generation of devices (2000 series and newer) 242 * use the version 2 of the bt command 243 * we need to make sure sending the host command 244 * with correct data structure to avoid uCode assert 245 */ 246 if (priv->lib->bt_params->bt_session_2) { 247 bt_cmd_v2.prio_boost = cpu_to_le32( 248 priv->lib->bt_params->bt_prio_boost); 249 bt_cmd_v2.tx_prio_boost = 0; 250 bt_cmd_v2.rx_prio_boost = 0; 251 } else { 252 /* older version only has 8 bits */ 253 WARN_ON(priv->lib->bt_params->bt_prio_boost & ~0xFF); 254 bt_cmd_v1.prio_boost = 255 priv->lib->bt_params->bt_prio_boost; 256 bt_cmd_v1.tx_prio_boost = 0; 257 bt_cmd_v1.rx_prio_boost = 0; 258 } 259 } else { 260 IWL_ERR(priv, "failed to construct BT Coex Config\n"); 261 return; 262 } 263 264 /* 265 * Possible situations when BT needs to take over for receive, 266 * at the same time where STA needs to response to AP's frame(s), 267 * reduce the tx power of the required response frames, by that, 268 * allow the concurrent BT receive & WiFi transmit 269 * (BT - ANT A, WiFi -ANT B), without interference to one another 270 * 271 * Reduced tx power apply to control frames only (ACK/Back/CTS) 272 * when indicated by the BT config command 273 */ 274 basic.kill_ack_mask = priv->kill_ack_mask; 275 basic.kill_cts_mask = priv->kill_cts_mask; 276 if (priv->reduced_txpower) 277 basic.reduce_txpower = IWLAGN_BT_REDUCED_TX_PWR; 278 basic.valid = priv->bt_valid; 279 280 /* 281 * Configure BT coex mode to "no coexistence" when the 282 * user disabled BT coexistence, we have no interface 283 * (might be in monitor mode), or the interface is in 284 * IBSS mode (no proper uCode support for coex then). 285 */ 286 if (!iwlwifi_mod_params.bt_coex_active || 287 priv->iw_mode == NL80211_IFTYPE_ADHOC) { 288 basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED; 289 } else { 290 basic.flags = IWLAGN_BT_FLAG_COEX_MODE_3W << 291 IWLAGN_BT_FLAG_COEX_MODE_SHIFT; 292 293 if (!priv->bt_enable_pspoll) 294 basic.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE; 295 else 296 basic.flags &= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE; 297 298 if (priv->bt_ch_announce) 299 basic.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION; 300 IWL_DEBUG_COEX(priv, "BT coex flag: 0X%x\n", basic.flags); 301 } 302 priv->bt_enable_flag = basic.flags; 303 if (priv->bt_full_concurrent) 304 memcpy(basic.bt3_lookup_table, iwlagn_concurrent_lookup, 305 sizeof(iwlagn_concurrent_lookup)); 306 else 307 memcpy(basic.bt3_lookup_table, iwlagn_def_3w_lookup, 308 sizeof(iwlagn_def_3w_lookup)); 309 310 IWL_DEBUG_COEX(priv, "BT coex %s in %s mode\n", 311 basic.flags ? "active" : "disabled", 312 priv->bt_full_concurrent ? 313 "full concurrency" : "3-wire"); 314 315 if (priv->lib->bt_params->bt_session_2) { 316 memcpy(&bt_cmd_v2.basic, &basic, 317 sizeof(basic)); 318 ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, 319 0, sizeof(bt_cmd_v2), &bt_cmd_v2); 320 } else { 321 memcpy(&bt_cmd_v1.basic, &basic, 322 sizeof(basic)); 323 ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, 324 0, sizeof(bt_cmd_v1), &bt_cmd_v1); 325 } 326 if (ret) 327 IWL_ERR(priv, "failed to send BT Coex Config\n"); 328 329 } 330 331 void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena) 332 { 333 struct iwl_rxon_context *ctx, *found_ctx = NULL; 334 bool found_ap = false; 335 336 lockdep_assert_held(&priv->mutex); 337 338 /* Check whether AP or GO mode is active. */ 339 if (rssi_ena) { 340 for_each_context(priv, ctx) { 341 if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_AP && 342 iwl_is_associated_ctx(ctx)) { 343 found_ap = true; 344 break; 345 } 346 } 347 } 348 349 /* 350 * If disable was received or If GO/AP mode, disable RSSI 351 * measurements. 352 */ 353 if (!rssi_ena || found_ap) { 354 if (priv->cur_rssi_ctx) { 355 ctx = priv->cur_rssi_ctx; 356 ieee80211_disable_rssi_reports(ctx->vif); 357 priv->cur_rssi_ctx = NULL; 358 } 359 return; 360 } 361 362 /* 363 * If rssi measurements need to be enabled, consider all cases now. 364 * Figure out how many contexts are active. 365 */ 366 for_each_context(priv, ctx) { 367 if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION && 368 iwl_is_associated_ctx(ctx)) { 369 found_ctx = ctx; 370 break; 371 } 372 } 373 374 /* 375 * rssi monitor already enabled for the correct interface...nothing 376 * to do. 377 */ 378 if (found_ctx == priv->cur_rssi_ctx) 379 return; 380 381 /* 382 * Figure out if rssi monitor is currently enabled, and needs 383 * to be changed. If rssi monitor is already enabled, disable 384 * it first else just enable rssi measurements on the 385 * interface found above. 386 */ 387 if (priv->cur_rssi_ctx) { 388 ctx = priv->cur_rssi_ctx; 389 if (ctx->vif) 390 ieee80211_disable_rssi_reports(ctx->vif); 391 } 392 393 priv->cur_rssi_ctx = found_ctx; 394 395 if (!found_ctx) 396 return; 397 398 ieee80211_enable_rssi_reports(found_ctx->vif, 399 IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD, 400 IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD); 401 } 402 403 static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg *uart_msg) 404 { 405 return (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >> 406 BT_UART_MSG_FRAME3SCOESCO_POS; 407 } 408 409 static void iwlagn_bt_traffic_change_work(struct work_struct *work) 410 { 411 struct iwl_priv *priv = 412 container_of(work, struct iwl_priv, bt_traffic_change_work); 413 struct iwl_rxon_context *ctx; 414 int smps_request = -1; 415 416 if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) { 417 /* bt coex disabled */ 418 return; 419 } 420 421 /* 422 * Note: bt_traffic_load can be overridden by scan complete and 423 * coex profile notifications. Ignore that since only bad consequence 424 * can be not matching debug print with actual state. 425 */ 426 IWL_DEBUG_COEX(priv, "BT traffic load changes: %d\n", 427 priv->bt_traffic_load); 428 429 switch (priv->bt_traffic_load) { 430 case IWL_BT_COEX_TRAFFIC_LOAD_NONE: 431 if (priv->bt_status) 432 smps_request = IEEE80211_SMPS_DYNAMIC; 433 else 434 smps_request = IEEE80211_SMPS_AUTOMATIC; 435 break; 436 case IWL_BT_COEX_TRAFFIC_LOAD_LOW: 437 smps_request = IEEE80211_SMPS_DYNAMIC; 438 break; 439 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: 440 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: 441 smps_request = IEEE80211_SMPS_STATIC; 442 break; 443 default: 444 IWL_ERR(priv, "Invalid BT traffic load: %d\n", 445 priv->bt_traffic_load); 446 break; 447 } 448 449 mutex_lock(&priv->mutex); 450 451 /* 452 * We can not send command to firmware while scanning. When the scan 453 * complete we will schedule this work again. We do check with mutex 454 * locked to prevent new scan request to arrive. We do not check 455 * STATUS_SCANNING to avoid race when queue_work two times from 456 * different notifications, but quit and not perform any work at all. 457 */ 458 if (test_bit(STATUS_SCAN_HW, &priv->status)) 459 goto out; 460 461 iwl_update_chain_flags(priv); 462 463 if (smps_request != -1) { 464 priv->current_ht_config.smps = smps_request; 465 for_each_context(priv, ctx) { 466 if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION) 467 ieee80211_request_smps(ctx->vif, smps_request); 468 } 469 } 470 471 /* 472 * Dynamic PS poll related functionality. Adjust RSSI measurements if 473 * necessary. 474 */ 475 iwlagn_bt_coex_rssi_monitor(priv); 476 out: 477 mutex_unlock(&priv->mutex); 478 } 479 480 /* 481 * If BT sco traffic, and RSSI monitor is enabled, move measurements to the 482 * correct interface or disable it if this is the last interface to be 483 * removed. 484 */ 485 void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv) 486 { 487 if (priv->bt_is_sco && 488 priv->bt_traffic_load == IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS) 489 iwlagn_bt_adjust_rssi_monitor(priv, true); 490 else 491 iwlagn_bt_adjust_rssi_monitor(priv, false); 492 } 493 494 static void iwlagn_print_uartmsg(struct iwl_priv *priv, 495 struct iwl_bt_uart_msg *uart_msg) 496 { 497 IWL_DEBUG_COEX(priv, "Message Type = 0x%X, SSN = 0x%X, " 498 "Update Req = 0x%X\n", 499 (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >> 500 BT_UART_MSG_FRAME1MSGTYPE_POS, 501 (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >> 502 BT_UART_MSG_FRAME1SSN_POS, 503 (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >> 504 BT_UART_MSG_FRAME1UPDATEREQ_POS); 505 506 IWL_DEBUG_COEX(priv, "Open connections = 0x%X, Traffic load = 0x%X, " 507 "Chl_SeqN = 0x%X, In band = 0x%X\n", 508 (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >> 509 BT_UART_MSG_FRAME2OPENCONNECTIONS_POS, 510 (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >> 511 BT_UART_MSG_FRAME2TRAFFICLOAD_POS, 512 (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >> 513 BT_UART_MSG_FRAME2CHLSEQN_POS, 514 (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >> 515 BT_UART_MSG_FRAME2INBAND_POS); 516 517 IWL_DEBUG_COEX(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, " 518 "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X\n", 519 (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >> 520 BT_UART_MSG_FRAME3SCOESCO_POS, 521 (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >> 522 BT_UART_MSG_FRAME3SNIFF_POS, 523 (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >> 524 BT_UART_MSG_FRAME3A2DP_POS, 525 (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >> 526 BT_UART_MSG_FRAME3ACL_POS, 527 (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >> 528 BT_UART_MSG_FRAME3MASTER_POS, 529 (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >> 530 BT_UART_MSG_FRAME3OBEX_POS); 531 532 IWL_DEBUG_COEX(priv, "Idle duration = 0x%X\n", 533 (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >> 534 BT_UART_MSG_FRAME4IDLEDURATION_POS); 535 536 IWL_DEBUG_COEX(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, " 537 "eSCO Retransmissions = 0x%X\n", 538 (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >> 539 BT_UART_MSG_FRAME5TXACTIVITY_POS, 540 (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >> 541 BT_UART_MSG_FRAME5RXACTIVITY_POS, 542 (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >> 543 BT_UART_MSG_FRAME5ESCORETRANSMIT_POS); 544 545 IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X\n", 546 (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >> 547 BT_UART_MSG_FRAME6SNIFFINTERVAL_POS, 548 (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >> 549 BT_UART_MSG_FRAME6DISCOVERABLE_POS); 550 551 IWL_DEBUG_COEX(priv, "Sniff Activity = 0x%X, Page = " 552 "0x%X, Inquiry = 0x%X, Connectable = 0x%X\n", 553 (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >> 554 BT_UART_MSG_FRAME7SNIFFACTIVITY_POS, 555 (BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >> 556 BT_UART_MSG_FRAME7PAGE_POS, 557 (BT_UART_MSG_FRAME7INQUIRY_MSK & uart_msg->frame7) >> 558 BT_UART_MSG_FRAME7INQUIRY_POS, 559 (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >> 560 BT_UART_MSG_FRAME7CONNECTABLE_POS); 561 } 562 563 static bool iwlagn_set_kill_msk(struct iwl_priv *priv, 564 struct iwl_bt_uart_msg *uart_msg) 565 { 566 bool need_update = false; 567 u8 kill_msk = IWL_BT_KILL_REDUCE; 568 static const __le32 bt_kill_ack_msg[3] = { 569 IWLAGN_BT_KILL_ACK_MASK_DEFAULT, 570 IWLAGN_BT_KILL_ACK_CTS_MASK_SCO, 571 IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE}; 572 static const __le32 bt_kill_cts_msg[3] = { 573 IWLAGN_BT_KILL_CTS_MASK_DEFAULT, 574 IWLAGN_BT_KILL_ACK_CTS_MASK_SCO, 575 IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE}; 576 577 if (!priv->reduced_txpower) 578 kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) 579 ? IWL_BT_KILL_OVERRIDE : IWL_BT_KILL_DEFAULT; 580 if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] || 581 priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) { 582 priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK; 583 priv->kill_ack_mask = bt_kill_ack_msg[kill_msk]; 584 priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK; 585 priv->kill_cts_mask = bt_kill_cts_msg[kill_msk]; 586 need_update = true; 587 } 588 return need_update; 589 } 590 591 /* 592 * Upon RSSI changes, sends a bt config command with following changes 593 * 1. enable/disable "reduced control frames tx power 594 * 2. update the "kill)ack_mask" and "kill_cts_mask" 595 * 596 * If "reduced tx power" is enabled, uCode shall 597 * 1. ACK/Back/CTS rate shall reduced to 6Mbps 598 * 2. not use duplciate 20/40MHz mode 599 */ 600 static bool iwlagn_fill_txpower_mode(struct iwl_priv *priv, 601 struct iwl_bt_uart_msg *uart_msg) 602 { 603 bool need_update = false; 604 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; 605 int ave_rssi; 606 607 if (!ctx->vif || (ctx->vif->type != NL80211_IFTYPE_STATION)) { 608 IWL_DEBUG_INFO(priv, "BSS ctx not active or not in sta mode\n"); 609 return false; 610 } 611 612 ave_rssi = ieee80211_ave_rssi(ctx->vif); 613 if (!ave_rssi) { 614 /* no rssi data, no changes to reduce tx power */ 615 IWL_DEBUG_COEX(priv, "no rssi data available\n"); 616 return need_update; 617 } 618 if (!priv->reduced_txpower && 619 !iwl_is_associated(priv, IWL_RXON_CTX_PAN) && 620 (ave_rssi > BT_ENABLE_REDUCED_TXPOWER_THRESHOLD) && 621 (uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK | 622 BT_UART_MSG_FRAME3OBEX_MSK)) && 623 !(uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK | 624 BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK))) { 625 /* enabling reduced tx power */ 626 priv->reduced_txpower = true; 627 priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR; 628 need_update = true; 629 } else if (priv->reduced_txpower && 630 (iwl_is_associated(priv, IWL_RXON_CTX_PAN) || 631 (ave_rssi < BT_DISABLE_REDUCED_TXPOWER_THRESHOLD) || 632 (uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK | 633 BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK)) || 634 !(uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK | 635 BT_UART_MSG_FRAME3OBEX_MSK)))) { 636 /* disable reduced tx power */ 637 priv->reduced_txpower = false; 638 priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR; 639 need_update = true; 640 } 641 642 return need_update; 643 } 644 645 static void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv, 646 struct iwl_rx_cmd_buffer *rxb) 647 { 648 struct iwl_rx_packet *pkt = rxb_addr(rxb); 649 struct iwl_bt_coex_profile_notif *coex = (void *)pkt->data; 650 struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg; 651 652 if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) { 653 /* bt coex disabled */ 654 return; 655 } 656 657 IWL_DEBUG_COEX(priv, "BT Coex notification:\n"); 658 IWL_DEBUG_COEX(priv, " status: %d\n", coex->bt_status); 659 IWL_DEBUG_COEX(priv, " traffic load: %d\n", coex->bt_traffic_load); 660 IWL_DEBUG_COEX(priv, " CI compliance: %d\n", 661 coex->bt_ci_compliance); 662 iwlagn_print_uartmsg(priv, uart_msg); 663 664 priv->last_bt_traffic_load = priv->bt_traffic_load; 665 priv->bt_is_sco = iwlagn_bt_traffic_is_sco(uart_msg); 666 667 if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { 668 if (priv->bt_status != coex->bt_status || 669 priv->last_bt_traffic_load != coex->bt_traffic_load) { 670 if (coex->bt_status) { 671 /* BT on */ 672 if (!priv->bt_ch_announce) 673 priv->bt_traffic_load = 674 IWL_BT_COEX_TRAFFIC_LOAD_HIGH; 675 else 676 priv->bt_traffic_load = 677 coex->bt_traffic_load; 678 } else { 679 /* BT off */ 680 priv->bt_traffic_load = 681 IWL_BT_COEX_TRAFFIC_LOAD_NONE; 682 } 683 priv->bt_status = coex->bt_status; 684 queue_work(priv->workqueue, 685 &priv->bt_traffic_change_work); 686 } 687 } 688 689 /* schedule to send runtime bt_config */ 690 /* check reduce power before change ack/cts kill mask */ 691 if (iwlagn_fill_txpower_mode(priv, uart_msg) || 692 iwlagn_set_kill_msk(priv, uart_msg)) 693 queue_work(priv->workqueue, &priv->bt_runtime_config); 694 695 696 /* FIXME: based on notification, adjust the prio_boost */ 697 698 priv->bt_ci_compliance = coex->bt_ci_compliance; 699 } 700 701 void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv) 702 { 703 priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] = 704 iwlagn_bt_coex_profile_notif; 705 } 706 707 void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv) 708 { 709 INIT_WORK(&priv->bt_traffic_change_work, 710 iwlagn_bt_traffic_change_work); 711 } 712 713 void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv) 714 { 715 cancel_work_sync(&priv->bt_traffic_change_work); 716 } 717 718 static bool is_single_rx_stream(struct iwl_priv *priv) 719 { 720 return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC || 721 priv->current_ht_config.single_chain_sufficient; 722 } 723 724 #define IWL_NUM_RX_CHAINS_MULTIPLE 3 725 #define IWL_NUM_RX_CHAINS_SINGLE 2 726 #define IWL_NUM_IDLE_CHAINS_DUAL 2 727 #define IWL_NUM_IDLE_CHAINS_SINGLE 1 728 729 /* 730 * Determine how many receiver/antenna chains to use. 731 * 732 * More provides better reception via diversity. Fewer saves power 733 * at the expense of throughput, but only when not in powersave to 734 * start with. 735 * 736 * MIMO (dual stream) requires at least 2, but works better with 3. 737 * This does not determine *which* chains to use, just how many. 738 */ 739 static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) 740 { 741 if (priv->lib->bt_params && 742 priv->lib->bt_params->advanced_bt_coexist && 743 (priv->bt_full_concurrent || 744 priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { 745 /* 746 * only use chain 'A' in bt high traffic load or 747 * full concurrency mode 748 */ 749 return IWL_NUM_RX_CHAINS_SINGLE; 750 } 751 /* # of Rx chains to use when expecting MIMO. */ 752 if (is_single_rx_stream(priv)) 753 return IWL_NUM_RX_CHAINS_SINGLE; 754 else 755 return IWL_NUM_RX_CHAINS_MULTIPLE; 756 } 757 758 /* 759 * When we are in power saving mode, unless device support spatial 760 * multiplexing power save, use the active count for rx chain count. 761 */ 762 static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) 763 { 764 /* # Rx chains when idling, depending on SMPS mode */ 765 switch (priv->current_ht_config.smps) { 766 case IEEE80211_SMPS_STATIC: 767 case IEEE80211_SMPS_DYNAMIC: 768 return IWL_NUM_IDLE_CHAINS_SINGLE; 769 case IEEE80211_SMPS_AUTOMATIC: 770 case IEEE80211_SMPS_OFF: 771 return active_cnt; 772 default: 773 WARN(1, "invalid SMPS mode %d", 774 priv->current_ht_config.smps); 775 return active_cnt; 776 } 777 } 778 779 /* up to 4 chains */ 780 static u8 iwl_count_chain_bitmap(u32 chain_bitmap) 781 { 782 u8 res; 783 res = (chain_bitmap & BIT(0)) >> 0; 784 res += (chain_bitmap & BIT(1)) >> 1; 785 res += (chain_bitmap & BIT(2)) >> 2; 786 res += (chain_bitmap & BIT(3)) >> 3; 787 return res; 788 } 789 790 /** 791 * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image 792 * 793 * Selects how many and which Rx receivers/antennas/chains to use. 794 * This should not be used for scan command ... it puts data in wrong place. 795 */ 796 void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx) 797 { 798 bool is_single = is_single_rx_stream(priv); 799 bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); 800 u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; 801 u32 active_chains; 802 u16 rx_chain; 803 804 /* Tell uCode which antennas are actually connected. 805 * Before first association, we assume all antennas are connected. 806 * Just after first association, iwl_chain_noise_calibration() 807 * checks which antennas actually *are* connected. */ 808 if (priv->chain_noise_data.active_chains) 809 active_chains = priv->chain_noise_data.active_chains; 810 else 811 active_chains = priv->nvm_data->valid_rx_ant; 812 813 if (priv->lib->bt_params && 814 priv->lib->bt_params->advanced_bt_coexist && 815 (priv->bt_full_concurrent || 816 priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { 817 /* 818 * only use chain 'A' in bt high traffic load or 819 * full concurrency mode 820 */ 821 active_chains = first_antenna(active_chains); 822 } 823 824 rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; 825 826 /* How many receivers should we use? */ 827 active_rx_cnt = iwl_get_active_rx_chain_count(priv); 828 idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); 829 830 831 /* correct rx chain count according hw settings 832 * and chain noise calibration 833 */ 834 valid_rx_cnt = iwl_count_chain_bitmap(active_chains); 835 if (valid_rx_cnt < active_rx_cnt) 836 active_rx_cnt = valid_rx_cnt; 837 838 if (valid_rx_cnt < idle_rx_cnt) 839 idle_rx_cnt = valid_rx_cnt; 840 841 rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; 842 rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; 843 844 ctx->staging.rx_chain = cpu_to_le16(rx_chain); 845 846 if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) 847 ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; 848 else 849 ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; 850 851 IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", 852 ctx->staging.rx_chain, 853 active_rx_cnt, idle_rx_cnt); 854 855 WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || 856 active_rx_cnt < idle_rx_cnt); 857 } 858 859 u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid) 860 { 861 int i; 862 u8 ind = ant; 863 864 if (priv->band == NL80211_BAND_2GHZ && 865 priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) 866 return 0; 867 868 for (i = 0; i < RATE_ANT_NUM - 1; i++) { 869 ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; 870 if (valid & BIT(ind)) 871 return ind; 872 } 873 return ant; 874 } 875 876 #ifdef CONFIG_PM_SLEEP 877 static void iwlagn_convert_p1k(u16 *p1k, __le16 *out) 878 { 879 int i; 880 881 for (i = 0; i < IWLAGN_P1K_SIZE; i++) 882 out[i] = cpu_to_le16(p1k[i]); 883 } 884 885 struct wowlan_key_data { 886 struct iwl_rxon_context *ctx; 887 struct iwlagn_wowlan_rsc_tsc_params_cmd *rsc_tsc; 888 struct iwlagn_wowlan_tkip_params_cmd *tkip; 889 const u8 *bssid; 890 bool error, use_rsc_tsc, use_tkip; 891 }; 892 893 894 static void iwlagn_wowlan_program_keys(struct ieee80211_hw *hw, 895 struct ieee80211_vif *vif, 896 struct ieee80211_sta *sta, 897 struct ieee80211_key_conf *key, 898 void *_data) 899 { 900 struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); 901 struct wowlan_key_data *data = _data; 902 struct iwl_rxon_context *ctx = data->ctx; 903 struct aes_sc *aes_sc, *aes_tx_sc = NULL; 904 struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL; 905 struct iwlagn_p1k_cache *rx_p1ks; 906 u8 *rx_mic_key; 907 struct ieee80211_key_seq seq; 908 u32 cur_rx_iv32 = 0; 909 u16 p1k[IWLAGN_P1K_SIZE]; 910 int ret, i; 911 912 mutex_lock(&priv->mutex); 913 914 if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || 915 key->cipher == WLAN_CIPHER_SUITE_WEP104) && 916 !sta && !ctx->key_mapping_keys) 917 ret = iwl_set_default_wep_key(priv, ctx, key); 918 else 919 ret = iwl_set_dynamic_key(priv, ctx, key, sta); 920 921 if (ret) { 922 IWL_ERR(priv, "Error setting key during suspend!\n"); 923 data->error = true; 924 } 925 926 switch (key->cipher) { 927 case WLAN_CIPHER_SUITE_TKIP: 928 if (sta) { 929 u64 pn64; 930 931 tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc; 932 tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc; 933 934 rx_p1ks = data->tkip->rx_uni; 935 936 pn64 = atomic64_read(&key->tx_pn); 937 tkip_tx_sc->iv16 = cpu_to_le16(TKIP_PN_TO_IV16(pn64)); 938 tkip_tx_sc->iv32 = cpu_to_le32(TKIP_PN_TO_IV32(pn64)); 939 940 ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k); 941 iwlagn_convert_p1k(p1k, data->tkip->tx.p1k); 942 943 memcpy(data->tkip->mic_keys.tx, 944 &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], 945 IWLAGN_MIC_KEY_SIZE); 946 947 rx_mic_key = data->tkip->mic_keys.rx_unicast; 948 } else { 949 tkip_sc = 950 data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc; 951 rx_p1ks = data->tkip->rx_multi; 952 rx_mic_key = data->tkip->mic_keys.rx_mcast; 953 } 954 955 /* 956 * For non-QoS this relies on the fact that both the uCode and 957 * mac80211 use TID 0 (as they need to to avoid replay attacks) 958 * for checking the IV in the frames. 959 */ 960 for (i = 0; i < IWLAGN_NUM_RSC; i++) { 961 ieee80211_get_key_rx_seq(key, i, &seq); 962 tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16); 963 tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32); 964 /* wrapping isn't allowed, AP must rekey */ 965 if (seq.tkip.iv32 > cur_rx_iv32) 966 cur_rx_iv32 = seq.tkip.iv32; 967 } 968 969 ieee80211_get_tkip_rx_p1k(key, data->bssid, cur_rx_iv32, p1k); 970 iwlagn_convert_p1k(p1k, rx_p1ks[0].p1k); 971 ieee80211_get_tkip_rx_p1k(key, data->bssid, 972 cur_rx_iv32 + 1, p1k); 973 iwlagn_convert_p1k(p1k, rx_p1ks[1].p1k); 974 975 memcpy(rx_mic_key, 976 &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], 977 IWLAGN_MIC_KEY_SIZE); 978 979 data->use_tkip = true; 980 data->use_rsc_tsc = true; 981 break; 982 case WLAN_CIPHER_SUITE_CCMP: 983 if (sta) { 984 u64 pn64; 985 986 aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc; 987 aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc; 988 989 pn64 = atomic64_read(&key->tx_pn); 990 aes_tx_sc->pn = cpu_to_le64(pn64); 991 } else 992 aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc; 993 994 /* 995 * For non-QoS this relies on the fact that both the uCode and 996 * mac80211 use TID 0 for checking the IV in the frames. 997 */ 998 for (i = 0; i < IWLAGN_NUM_RSC; i++) { 999 u8 *pn = seq.ccmp.pn; 1000 1001 ieee80211_get_key_rx_seq(key, i, &seq); 1002 aes_sc[i].pn = cpu_to_le64( 1003 (u64)pn[5] | 1004 ((u64)pn[4] << 8) | 1005 ((u64)pn[3] << 16) | 1006 ((u64)pn[2] << 24) | 1007 ((u64)pn[1] << 32) | 1008 ((u64)pn[0] << 40)); 1009 } 1010 data->use_rsc_tsc = true; 1011 break; 1012 } 1013 1014 mutex_unlock(&priv->mutex); 1015 } 1016 1017 int iwlagn_send_patterns(struct iwl_priv *priv, 1018 struct cfg80211_wowlan *wowlan) 1019 { 1020 struct iwlagn_wowlan_patterns_cmd *pattern_cmd; 1021 struct iwl_host_cmd cmd = { 1022 .id = REPLY_WOWLAN_PATTERNS, 1023 .dataflags[0] = IWL_HCMD_DFL_NOCOPY, 1024 }; 1025 int i, err; 1026 1027 if (!wowlan->n_patterns) 1028 return 0; 1029 1030 cmd.len[0] = sizeof(*pattern_cmd) + 1031 wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern); 1032 1033 pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL); 1034 if (!pattern_cmd) 1035 return -ENOMEM; 1036 1037 pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns); 1038 1039 for (i = 0; i < wowlan->n_patterns; i++) { 1040 int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8); 1041 1042 memcpy(&pattern_cmd->patterns[i].mask, 1043 wowlan->patterns[i].mask, mask_len); 1044 memcpy(&pattern_cmd->patterns[i].pattern, 1045 wowlan->patterns[i].pattern, 1046 wowlan->patterns[i].pattern_len); 1047 pattern_cmd->patterns[i].mask_size = mask_len; 1048 pattern_cmd->patterns[i].pattern_size = 1049 wowlan->patterns[i].pattern_len; 1050 } 1051 1052 cmd.data[0] = pattern_cmd; 1053 err = iwl_dvm_send_cmd(priv, &cmd); 1054 kfree(pattern_cmd); 1055 return err; 1056 } 1057 1058 int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan) 1059 { 1060 struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd; 1061 struct iwl_rxon_cmd rxon; 1062 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; 1063 struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd; 1064 struct iwlagn_wowlan_tkip_params_cmd tkip_cmd = {}; 1065 struct iwlagn_d3_config_cmd d3_cfg_cmd = { 1066 /* 1067 * Program the minimum sleep time to 10 seconds, as many 1068 * platforms have issues processing a wakeup signal while 1069 * still being in the process of suspending. 1070 */ 1071 .min_sleep_time = cpu_to_le32(10 * 1000 * 1000), 1072 }; 1073 struct wowlan_key_data key_data = { 1074 .ctx = ctx, 1075 .bssid = ctx->active.bssid_addr, 1076 .use_rsc_tsc = false, 1077 .tkip = &tkip_cmd, 1078 .use_tkip = false, 1079 }; 1080 int ret, i; 1081 u16 seq; 1082 1083 key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL); 1084 if (!key_data.rsc_tsc) 1085 return -ENOMEM; 1086 1087 memset(&wakeup_filter_cmd, 0, sizeof(wakeup_filter_cmd)); 1088 1089 /* 1090 * We know the last used seqno, and the uCode expects to know that 1091 * one, it will increment before TX. 1092 */ 1093 seq = le16_to_cpu(priv->last_seq_ctl) & IEEE80211_SCTL_SEQ; 1094 wakeup_filter_cmd.non_qos_seq = cpu_to_le16(seq); 1095 1096 /* 1097 * For QoS counters, we store the one to use next, so subtract 0x10 1098 * since the uCode will add 0x10 before using the value. 1099 */ 1100 for (i = 0; i < IWL_MAX_TID_COUNT; i++) { 1101 seq = priv->tid_data[IWL_AP_ID][i].seq_number; 1102 seq -= 0x10; 1103 wakeup_filter_cmd.qos_seq[i] = cpu_to_le16(seq); 1104 } 1105 1106 if (wowlan->disconnect) 1107 wakeup_filter_cmd.enabled |= 1108 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS | 1109 IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE); 1110 if (wowlan->magic_pkt) 1111 wakeup_filter_cmd.enabled |= 1112 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET); 1113 if (wowlan->gtk_rekey_failure) 1114 wakeup_filter_cmd.enabled |= 1115 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL); 1116 if (wowlan->eap_identity_req) 1117 wakeup_filter_cmd.enabled |= 1118 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ); 1119 if (wowlan->four_way_handshake) 1120 wakeup_filter_cmd.enabled |= 1121 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE); 1122 if (wowlan->n_patterns) 1123 wakeup_filter_cmd.enabled |= 1124 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH); 1125 1126 if (wowlan->rfkill_release) 1127 d3_cfg_cmd.wakeup_flags |= 1128 cpu_to_le32(IWLAGN_D3_WAKEUP_RFKILL); 1129 1130 iwl_scan_cancel_timeout(priv, 200); 1131 1132 memcpy(&rxon, &ctx->active, sizeof(rxon)); 1133 1134 priv->ucode_loaded = false; 1135 iwl_trans_stop_device(priv->trans); 1136 ret = iwl_trans_start_hw(priv->trans); 1137 if (ret) 1138 goto out; 1139 1140 priv->wowlan = true; 1141 1142 ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN); 1143 if (ret) 1144 goto out; 1145 1146 /* now configure WoWLAN ucode */ 1147 ret = iwl_alive_start(priv); 1148 if (ret) 1149 goto out; 1150 1151 memcpy(&ctx->staging, &rxon, sizeof(rxon)); 1152 ret = iwlagn_commit_rxon(priv, ctx); 1153 if (ret) 1154 goto out; 1155 1156 ret = iwl_power_update_mode(priv, true); 1157 if (ret) 1158 goto out; 1159 1160 if (!iwlwifi_mod_params.sw_crypto) { 1161 /* mark all keys clear */ 1162 priv->ucode_key_table = 0; 1163 ctx->key_mapping_keys = 0; 1164 1165 /* 1166 * This needs to be unlocked due to lock ordering 1167 * constraints. Since we're in the suspend path 1168 * that isn't really a problem though. 1169 */ 1170 mutex_unlock(&priv->mutex); 1171 ieee80211_iter_keys(priv->hw, ctx->vif, 1172 iwlagn_wowlan_program_keys, 1173 &key_data); 1174 mutex_lock(&priv->mutex); 1175 if (key_data.error) { 1176 ret = -EIO; 1177 goto out; 1178 } 1179 1180 if (key_data.use_rsc_tsc) { 1181 struct iwl_host_cmd rsc_tsc_cmd = { 1182 .id = REPLY_WOWLAN_TSC_RSC_PARAMS, 1183 .data[0] = key_data.rsc_tsc, 1184 .dataflags[0] = IWL_HCMD_DFL_NOCOPY, 1185 .len[0] = sizeof(*key_data.rsc_tsc), 1186 }; 1187 1188 ret = iwl_dvm_send_cmd(priv, &rsc_tsc_cmd); 1189 if (ret) 1190 goto out; 1191 } 1192 1193 if (key_data.use_tkip) { 1194 ret = iwl_dvm_send_cmd_pdu(priv, 1195 REPLY_WOWLAN_TKIP_PARAMS, 1196 0, sizeof(tkip_cmd), 1197 &tkip_cmd); 1198 if (ret) 1199 goto out; 1200 } 1201 1202 if (priv->have_rekey_data) { 1203 memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd)); 1204 memcpy(kek_kck_cmd.kck, priv->kck, NL80211_KCK_LEN); 1205 kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN); 1206 memcpy(kek_kck_cmd.kek, priv->kek, NL80211_KEK_LEN); 1207 kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN); 1208 kek_kck_cmd.replay_ctr = priv->replay_ctr; 1209 1210 ret = iwl_dvm_send_cmd_pdu(priv, 1211 REPLY_WOWLAN_KEK_KCK_MATERIAL, 1212 0, sizeof(kek_kck_cmd), 1213 &kek_kck_cmd); 1214 if (ret) 1215 goto out; 1216 } 1217 } 1218 1219 ret = iwl_dvm_send_cmd_pdu(priv, REPLY_D3_CONFIG, 0, 1220 sizeof(d3_cfg_cmd), &d3_cfg_cmd); 1221 if (ret) 1222 goto out; 1223 1224 ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_WAKEUP_FILTER, 1225 0, sizeof(wakeup_filter_cmd), 1226 &wakeup_filter_cmd); 1227 if (ret) 1228 goto out; 1229 1230 ret = iwlagn_send_patterns(priv, wowlan); 1231 out: 1232 kfree(key_data.rsc_tsc); 1233 return ret; 1234 } 1235 #endif 1236 1237 int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) 1238 { 1239 if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) { 1240 IWL_WARN(priv, "Not sending command - %s KILL\n", 1241 iwl_is_rfkill(priv) ? "RF" : "CT"); 1242 return -EIO; 1243 } 1244 1245 if (test_bit(STATUS_FW_ERROR, &priv->status)) { 1246 IWL_ERR(priv, "Command %s failed: FW Error\n", 1247 iwl_get_cmd_string(priv->trans, cmd->id)); 1248 return -EIO; 1249 } 1250 1251 /* 1252 * This can happen upon FW ASSERT: we clear the STATUS_FW_ERROR flag 1253 * in iwl_down but cancel the workers only later. 1254 */ 1255 if (!priv->ucode_loaded) { 1256 IWL_ERR(priv, "Fw not loaded - dropping CMD: %x\n", cmd->id); 1257 return -EIO; 1258 } 1259 1260 /* 1261 * Synchronous commands from this op-mode must hold 1262 * the mutex, this ensures we don't try to send two 1263 * (or more) synchronous commands at a time. 1264 */ 1265 if (!(cmd->flags & CMD_ASYNC)) 1266 lockdep_assert_held(&priv->mutex); 1267 1268 return iwl_trans_send_cmd(priv->trans, cmd); 1269 } 1270 1271 int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id, 1272 u32 flags, u16 len, const void *data) 1273 { 1274 struct iwl_host_cmd cmd = { 1275 .id = id, 1276 .len = { len, }, 1277 .data = { data, }, 1278 .flags = flags, 1279 }; 1280 1281 return iwl_dvm_send_cmd(priv, &cmd); 1282 } 1283