1config IWLWIFI
2	tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) "
3	depends on PCI && MAC80211 && HAS_IOMEM
4	select FW_LOADER
5	---help---
6	  Select to build the driver supporting the:
7
8	  Intel Wireless WiFi Link Next-Gen AGN
9
10	  This option enables support for use with the following hardware:
11		Intel Wireless WiFi Link 6250AGN Adapter
12		Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
13		Intel WiFi Link 1000BGN
14		Intel Wireless WiFi 5150AGN
15		Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
16		Intel 6005 Series Wi-Fi Adapters
17		Intel 6030 Series Wi-Fi Adapters
18		Intel Wireless WiFi Link 6150BGN 2 Adapter
19		Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
20		Intel 2000 Series Wi-Fi Adapters
21		Intel 7260 Wi-Fi Adapter
22		Intel 3160 Wi-Fi Adapter
23		Intel 7265 Wi-Fi Adapter
24		Intel 8260 Wi-Fi Adapter
25		Intel 3165 Wi-Fi Adapter
26
27
28	  This driver uses the kernel's mac80211 subsystem.
29
30	  In order to use this driver, you will need a firmware
31	  image for it. You can obtain the microcode from:
32
33	          <http://wireless.kernel.org/en/users/Drivers/iwlwifi>.
34
35	  The firmware is typically installed in /lib/firmware. You can
36	  look in the hotplug script /etc/hotplug/firmware.agent to
37	  determine which directory FIRMWARE_DIR is set to when the script
38	  runs.
39
40	  If you want to compile the driver as a module ( = code which can be
41	  inserted in and removed from the running kernel whenever you want),
42	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
43	  module will be called iwlwifi.
44
45if IWLWIFI
46
47config IWLWIFI_LEDS
48	bool
49	depends on LEDS_CLASS=y || LEDS_CLASS=IWLWIFI
50	select LEDS_TRIGGERS
51	select MAC80211_LEDS
52	default y
53
54config IWLDVM
55	tristate "Intel Wireless WiFi DVM Firmware support"
56	help
57	  This is the driver that supports the DVM firmware. The list
58	  of the devices that use this firmware is available here:
59	  https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi#firmware
60
61config IWLMVM
62	tristate "Intel Wireless WiFi MVM Firmware support"
63	select WANT_DEV_COREDUMP
64	help
65	  This is the driver that supports the MVM firmware. The list
66	  of the devices that use this firmware is available here:
67	  https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi#firmware
68
69# don't call it _MODULE -- will confuse Kconfig/fixdep/...
70config IWLWIFI_OPMODE_MODULAR
71	bool
72	default y if IWLDVM=m
73	default y if IWLMVM=m
74
75comment "WARNING: iwlwifi is useless without IWLDVM or IWLMVM"
76	depends on IWLDVM=n && IWLMVM=n
77
78config IWLWIFI_BCAST_FILTERING
79	bool "Enable broadcast filtering"
80	depends on IWLMVM
81	help
82	  Say Y here to enable default bcast filtering configuration.
83
84	  Enabling broadcast filtering will drop any incoming wireless
85	  broadcast frames, except some very specific predefined
86	  patterns (e.g. incoming arp requests).
87
88	  If unsure, don't enable this option, as some programs might
89	  expect incoming broadcasts for their normal operations.
90
91config IWLWIFI_PCIE_RTPM
92       bool "Enable runtime power management mode for PCIe devices"
93       depends on IWLMVM && PM
94       default false
95       help
96         Say Y here to enable runtime power management for PCIe
97         devices.  If enabled, the device will go into low power mode
98         when idle for a short period of time, allowing for improved
99         power saving during runtime.
100
101	 If unsure, say N.
102
103menu "Debugging Options"
104
105config IWLWIFI_DEBUG
106	bool "Enable full debugging output in the iwlwifi driver"
107	---help---
108	  This option will enable debug tracing output for the iwlwifi drivers
109
110	  This will result in the kernel module being ~100k larger.  You can
111	  control which debug output is sent to the kernel log by setting the
112	  value in
113
114		/sys/module/iwlwifi/parameters/debug
115
116	  This entry will only exist if this option is enabled.
117
118	  To set a value, simply echo an 8-byte hex value to the same file:
119
120		  % echo 0x43fff > /sys/module/iwlwifi/parameters/debug
121
122	  You can find the list of debug mask values in:
123		  drivers/net/wireless/iwlwifi/iwl-debug.h
124
125	  If this is your first time using this driver, you should say Y here
126	  as the debug information can assist others in helping you resolve
127	  any problems you may encounter.
128
129config IWLWIFI_DEBUGFS
130        bool "iwlwifi debugfs support"
131        depends on MAC80211_DEBUGFS
132        ---help---
133	  Enable creation of debugfs files for the iwlwifi drivers. This
134	  is a low-impact option that allows getting insight into the
135	  driver's state at runtime.
136
137config IWLWIFI_DEVICE_TRACING
138	bool "iwlwifi device access tracing"
139	depends on EVENT_TRACING
140	default y
141	help
142	  Say Y here to trace all commands, including TX frames and IO
143	  accesses, sent to the device. If you say yes, iwlwifi will
144	  register with the ftrace framework for event tracing and dump
145	  all this information to the ringbuffer, you may need to
146	  increase the ringbuffer size. See the ftrace documentation
147	  for more information.
148
149	  When tracing is not enabled, this option still has some
150	  (though rather small) overhead.
151
152	  If unsure, say Y so we can help you better when problems
153	  occur.
154endmenu
155
156endif
157