1 /****************************************************************************** 2 * 3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of version 2 of the GNU General Public License as 7 * published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program; if not, write to the Free Software Foundation, Inc., 16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA 17 * 18 * The full GNU General Public License is included in this distribution in the 19 * file called LICENSE. 20 * 21 * Contact Information: 22 * Intel Linux Wireless <ilw@linux.intel.com> 23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 24 * 25 *****************************************************************************/ 26 #ifndef __il_core_h__ 27 #define __il_core_h__ 28 29 #include <linux/interrupt.h> 30 #include <linux/pci.h> /* for struct pci_device_id */ 31 #include <linux/kernel.h> 32 #include <linux/leds.h> 33 #include <linux/wait.h> 34 #include <linux/io.h> 35 #include <net/mac80211.h> 36 #include <net/ieee80211_radiotap.h> 37 38 #include "commands.h" 39 #include "csr.h" 40 #include "prph.h" 41 42 struct il_host_cmd; 43 struct il_cmd; 44 struct il_tx_queue; 45 46 #define IL_ERR(f, a...) dev_err(&il->pci_dev->dev, f, ## a) 47 #define IL_WARN(f, a...) dev_warn(&il->pci_dev->dev, f, ## a) 48 #define IL_INFO(f, a...) dev_info(&il->pci_dev->dev, f, ## a) 49 50 #define RX_QUEUE_SIZE 256 51 #define RX_QUEUE_MASK 255 52 #define RX_QUEUE_SIZE_LOG 8 53 54 /* 55 * RX related structures and functions 56 */ 57 #define RX_FREE_BUFFERS 64 58 #define RX_LOW_WATERMARK 8 59 60 #define U32_PAD(n) ((4-(n))&0x3) 61 62 /* CT-KILL constants */ 63 #define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */ 64 65 /* Default noise level to report when noise measurement is not available. 66 * This may be because we're: 67 * 1) Not associated (4965, no beacon stats being sent to driver) 68 * 2) Scanning (noise measurement does not apply to associated channel) 69 * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) 70 * Use default noise value of -127 ... this is below the range of measurable 71 * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. 72 * Also, -127 works better than 0 when averaging frames with/without 73 * noise info (e.g. averaging might be done in app); measured dBm values are 74 * always negative ... using a negative value as the default keeps all 75 * averages within an s8's (used in some apps) range of negative values. */ 76 #define IL_NOISE_MEAS_NOT_AVAILABLE (-127) 77 78 /* 79 * RTS threshold here is total size [2347] minus 4 FCS bytes 80 * Per spec: 81 * a value of 0 means RTS on all data/management packets 82 * a value > max MSDU size means no RTS 83 * else RTS for data/management frames where MPDU is larger 84 * than RTS value. 85 */ 86 #define DEFAULT_RTS_THRESHOLD 2347U 87 #define MIN_RTS_THRESHOLD 0U 88 #define MAX_RTS_THRESHOLD 2347U 89 #define MAX_MSDU_SIZE 2304U 90 #define MAX_MPDU_SIZE 2346U 91 #define DEFAULT_BEACON_INTERVAL 100U 92 #define DEFAULT_SHORT_RETRY_LIMIT 7U 93 #define DEFAULT_LONG_RETRY_LIMIT 4U 94 95 struct il_rx_buf { 96 dma_addr_t page_dma; 97 struct page *page; 98 struct list_head list; 99 }; 100 101 #define rxb_addr(r) page_address(r->page) 102 103 /* defined below */ 104 struct il_device_cmd; 105 106 struct il_cmd_meta { 107 /* only for SYNC commands, iff the reply skb is wanted */ 108 struct il_host_cmd *source; 109 /* 110 * only for ASYNC commands 111 * (which is somewhat stupid -- look at common.c for instance 112 * which duplicates a bunch of code because the callback isn't 113 * invoked for SYNC commands, if it were and its result passed 114 * through it would be simpler...) 115 */ 116 void (*callback) (struct il_priv *il, struct il_device_cmd *cmd, 117 struct il_rx_pkt *pkt); 118 119 /* The CMD_SIZE_HUGE flag bit indicates that the command 120 * structure is stored at the end of the shared queue memory. */ 121 u32 flags; 122 123 DEFINE_DMA_UNMAP_ADDR(mapping); 124 DEFINE_DMA_UNMAP_LEN(len); 125 }; 126 127 /* 128 * Generic queue structure 129 * 130 * Contains common data for Rx and Tx queues 131 */ 132 struct il_queue { 133 int n_bd; /* number of BDs in this queue */ 134 int write_ptr; /* 1-st empty entry (idx) host_w */ 135 int read_ptr; /* last used entry (idx) host_r */ 136 /* use for monitoring and recovering the stuck queue */ 137 dma_addr_t dma_addr; /* physical addr for BD's */ 138 int n_win; /* safe queue win */ 139 u32 id; 140 int low_mark; /* low watermark, resume queue if free 141 * space more than this */ 142 int high_mark; /* high watermark, stop queue if free 143 * space less than this */ 144 }; 145 146 /** 147 * struct il_tx_queue - Tx Queue for DMA 148 * @q: generic Rx/Tx queue descriptor 149 * @bd: base of circular buffer of TFDs 150 * @cmd: array of command/TX buffer pointers 151 * @meta: array of meta data for each command/tx buffer 152 * @dma_addr_cmd: physical address of cmd/tx buffer array 153 * @skbs: array of per-TFD socket buffer pointers 154 * @time_stamp: time (in jiffies) of last read_ptr change 155 * @need_update: indicates need to update read/write idx 156 * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled 157 * 158 * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame 159 * descriptors) and required locking structures. 160 */ 161 #define TFD_TX_CMD_SLOTS 256 162 #define TFD_CMD_SLOTS 32 163 164 struct il_tx_queue { 165 struct il_queue q; 166 void *tfds; 167 struct il_device_cmd **cmd; 168 struct il_cmd_meta *meta; 169 struct sk_buff **skbs; 170 unsigned long time_stamp; 171 u8 need_update; 172 u8 sched_retry; 173 u8 active; 174 u8 swq_id; 175 }; 176 177 /* 178 * EEPROM access time values: 179 * 180 * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG. 181 * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1). 182 * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec. 183 * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG. 184 */ 185 #define IL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */ 186 187 #define IL_EEPROM_SEM_TIMEOUT 10 /* microseconds */ 188 #define IL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ 189 190 /* 191 * Regulatory channel usage flags in EEPROM struct il4965_eeprom_channel.flags. 192 * 193 * IBSS and/or AP operation is allowed *only* on those channels with 194 * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because 195 * RADAR detection is not supported by the 4965 driver, but is a 196 * requirement for establishing a new network for legal operation on channels 197 * requiring RADAR detection or restricting ACTIVE scanning. 198 * 199 * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels. 200 * It only indicates that 20 MHz channel use is supported; HT40 channel 201 * usage is indicated by a separate set of regulatory flags for each 202 * HT40 channel pair. 203 * 204 * NOTE: Using a channel inappropriately will result in a uCode error! 205 */ 206 #define IL_NUM_TX_CALIB_GROUPS 5 207 enum { 208 EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */ 209 EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */ 210 /* Bit 2 Reserved */ 211 EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ 212 EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ 213 EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ 214 /* Bit 6 Reserved (was Narrow Channel) */ 215 EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ 216 }; 217 218 /* SKU Capabilities */ 219 /* 3945 only */ 220 #define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0) 221 #define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1) 222 223 /* *regulatory* channel data format in eeprom, one for each channel. 224 * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */ 225 struct il_eeprom_channel { 226 u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */ 227 s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ 228 } __packed; 229 230 /* 3945 Specific */ 231 #define EEPROM_3945_EEPROM_VERSION (0x2f) 232 233 /* 4965 has two radio transmitters (and 3 radio receivers) */ 234 #define EEPROM_TX_POWER_TX_CHAINS (2) 235 236 /* 4965 has room for up to 8 sets of txpower calibration data */ 237 #define EEPROM_TX_POWER_BANDS (8) 238 239 /* 4965 factory calibration measures txpower gain settings for 240 * each of 3 target output levels */ 241 #define EEPROM_TX_POWER_MEASUREMENTS (3) 242 243 /* 4965 Specific */ 244 /* 4965 driver does not work with txpower calibration version < 5 */ 245 #define EEPROM_4965_TX_POWER_VERSION (5) 246 #define EEPROM_4965_EEPROM_VERSION (0x2f) 247 #define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */ 248 #define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */ 249 #define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */ 250 #define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */ 251 252 /* 2.4 GHz */ 253 extern const u8 il_eeprom_band_1[14]; 254 255 /* 256 * factory calibration data for one txpower level, on one channel, 257 * measured on one of the 2 tx chains (radio transmitter and associated 258 * antenna). EEPROM contains: 259 * 260 * 1) Temperature (degrees Celsius) of device when measurement was made. 261 * 262 * 2) Gain table idx used to achieve the target measurement power. 263 * This refers to the "well-known" gain tables (see 4965.h). 264 * 265 * 3) Actual measured output power, in half-dBm ("34" = 17 dBm). 266 * 267 * 4) RF power amplifier detector level measurement (not used). 268 */ 269 struct il_eeprom_calib_measure { 270 u8 temperature; /* Device temperature (Celsius) */ 271 u8 gain_idx; /* Index into gain table */ 272 u8 actual_pow; /* Measured RF output power, half-dBm */ 273 s8 pa_det; /* Power amp detector level (not used) */ 274 } __packed; 275 276 /* 277 * measurement set for one channel. EEPROM contains: 278 * 279 * 1) Channel number measured 280 * 281 * 2) Measurements for each of 3 power levels for each of 2 radio transmitters 282 * (a.k.a. "tx chains") (6 measurements altogether) 283 */ 284 struct il_eeprom_calib_ch_info { 285 u8 ch_num; 286 struct il_eeprom_calib_measure 287 measurements[EEPROM_TX_POWER_TX_CHAINS] 288 [EEPROM_TX_POWER_MEASUREMENTS]; 289 } __packed; 290 291 /* 292 * txpower subband info. 293 * 294 * For each frequency subband, EEPROM contains the following: 295 * 296 * 1) First and last channels within range of the subband. "0" values 297 * indicate that this sample set is not being used. 298 * 299 * 2) Sample measurement sets for 2 channels close to the range endpoints. 300 */ 301 struct il_eeprom_calib_subband_info { 302 u8 ch_from; /* channel number of lowest channel in subband */ 303 u8 ch_to; /* channel number of highest channel in subband */ 304 struct il_eeprom_calib_ch_info ch1; 305 struct il_eeprom_calib_ch_info ch2; 306 } __packed; 307 308 /* 309 * txpower calibration info. EEPROM contains: 310 * 311 * 1) Factory-measured saturation power levels (maximum levels at which 312 * tx power amplifier can output a signal without too much distortion). 313 * There is one level for 2.4 GHz band and one for 5 GHz band. These 314 * values apply to all channels within each of the bands. 315 * 316 * 2) Factory-measured power supply voltage level. This is assumed to be 317 * constant (i.e. same value applies to all channels/bands) while the 318 * factory measurements are being made. 319 * 320 * 3) Up to 8 sets of factory-measured txpower calibration values. 321 * These are for different frequency ranges, since txpower gain 322 * characteristics of the analog radio circuitry vary with frequency. 323 * 324 * Not all sets need to be filled with data; 325 * struct il_eeprom_calib_subband_info contains range of channels 326 * (0 if unused) for each set of data. 327 */ 328 struct il_eeprom_calib_info { 329 u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */ 330 u8 saturation_power52; /* half-dBm */ 331 __le16 voltage; /* signed */ 332 struct il_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS]; 333 } __packed; 334 335 /* General */ 336 #define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ 337 #define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ 338 #define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ 339 #define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ 340 #define EEPROM_VERSION (2*0x44) /* 2 bytes */ 341 #define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */ 342 #define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ 343 #define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */ 344 #define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ 345 #define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */ 346 347 /* The following masks are to be applied on EEPROM_RADIO_CONFIG */ 348 #define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ 349 #define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ 350 #define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ 351 #define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ 352 #define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ 353 #define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ 354 355 #define EEPROM_3945_RF_CFG_TYPE_MAX 0x0 356 #define EEPROM_4965_RF_CFG_TYPE_MAX 0x1 357 358 /* 359 * Per-channel regulatory data. 360 * 361 * Each channel that *might* be supported by iwl has a fixed location 362 * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory 363 * txpower (MSB). 364 * 365 * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz) 366 * channels (only for 4965, not supported by 3945) appear later in the EEPROM. 367 * 368 * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 369 */ 370 #define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */ 371 #define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */ 372 #define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */ 373 374 /* 375 * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196, 376 * 5.0 GHz channels 7, 8, 11, 12, 16 377 * (4915-5080MHz) (none of these is ever supported) 378 */ 379 #define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */ 380 #define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */ 381 382 /* 383 * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 384 * (5170-5320MHz) 385 */ 386 #define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */ 387 #define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */ 388 389 /* 390 * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 391 * (5500-5700MHz) 392 */ 393 #define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */ 394 #define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */ 395 396 /* 397 * 5.7 GHz channels 145, 149, 153, 157, 161, 165 398 * (5725-5825MHz) 399 */ 400 #define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */ 401 #define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */ 402 403 /* 404 * 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11) 405 * 406 * The channel listed is the center of the lower 20 MHz half of the channel. 407 * The overall center frequency is actually 2 channels (10 MHz) above that, 408 * and the upper half of each HT40 channel is centered 4 channels (20 MHz) away 409 * from the lower half; e.g. the upper half of HT40 channel 1 is channel 5, 410 * and the overall HT40 channel width centers on channel 3. 411 * 412 * NOTE: The RXON command uses 20 MHz channel numbers to specify the 413 * control channel to which to tune. RXON also specifies whether the 414 * control channel is the upper or lower half of a HT40 channel. 415 * 416 * NOTE: 4965 does not support HT40 channels on 2.4 GHz. 417 */ 418 #define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */ 419 420 /* 421 * 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64), 422 * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161) 423 */ 424 #define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */ 425 426 #define EEPROM_REGULATORY_BAND_NO_HT40 (0) 427 428 int il_eeprom_init(struct il_priv *il); 429 void il_eeprom_free(struct il_priv *il); 430 const u8 *il_eeprom_query_addr(const struct il_priv *il, size_t offset); 431 u16 il_eeprom_query16(const struct il_priv *il, size_t offset); 432 int il_init_channel_map(struct il_priv *il); 433 void il_free_channel_map(struct il_priv *il); 434 const struct il_channel_info *il_get_channel_info(const struct il_priv *il, 435 enum nl80211_band band, 436 u16 channel); 437 438 #define IL_NUM_SCAN_RATES (2) 439 440 struct il4965_channel_tgd_info { 441 u8 type; 442 s8 max_power; 443 }; 444 445 struct il4965_channel_tgh_info { 446 s64 last_radar_time; 447 }; 448 449 #define IL4965_MAX_RATE (33) 450 451 struct il3945_clip_group { 452 /* maximum power level to prevent clipping for each rate, derived by 453 * us from this band's saturation power in EEPROM */ 454 const s8 clip_powers[IL_MAX_RATES]; 455 }; 456 457 /* current Tx power values to use, one for each rate for each channel. 458 * requested power is limited by: 459 * -- regulatory EEPROM limits for this channel 460 * -- hardware capabilities (clip-powers) 461 * -- spectrum management 462 * -- user preference (e.g. iwconfig) 463 * when requested power is set, base power idx must also be set. */ 464 struct il3945_channel_power_info { 465 struct il3945_tx_power tpc; /* actual radio and DSP gain settings */ 466 s8 power_table_idx; /* actual (compenst'd) idx into gain table */ 467 s8 base_power_idx; /* gain idx for power at factory temp. */ 468 s8 requested_power; /* power (dBm) requested for this chnl/rate */ 469 }; 470 471 /* current scan Tx power values to use, one for each scan rate for each 472 * channel. */ 473 struct il3945_scan_power_info { 474 struct il3945_tx_power tpc; /* actual radio and DSP gain settings */ 475 s8 power_table_idx; /* actual (compenst'd) idx into gain table */ 476 s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ 477 }; 478 479 /* 480 * One for each channel, holds all channel setup data 481 * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant 482 * with one another! 483 */ 484 struct il_channel_info { 485 struct il4965_channel_tgd_info tgd; 486 struct il4965_channel_tgh_info tgh; 487 struct il_eeprom_channel eeprom; /* EEPROM regulatory limit */ 488 struct il_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for 489 * HT40 channel */ 490 491 u8 channel; /* channel number */ 492 u8 flags; /* flags copied from EEPROM */ 493 s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ 494 s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */ 495 s8 min_power; /* always 0 */ 496 s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ 497 498 u8 group_idx; /* 0-4, maps channel to group1/2/3/4/5 */ 499 u8 band_idx; /* 0-4, maps channel to band1/2/3/4/5 */ 500 enum nl80211_band band; 501 502 /* HT40 channel info */ 503 s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ 504 u8 ht40_flags; /* flags copied from EEPROM */ 505 u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */ 506 507 /* Radio/DSP gain settings for each "normal" data Tx rate. 508 * These include, in addition to RF and DSP gain, a few fields for 509 * remembering/modifying gain settings (idxes). */ 510 struct il3945_channel_power_info power_info[IL4965_MAX_RATE]; 511 512 /* Radio/DSP gain settings for each scan rate, for directed scans. */ 513 struct il3945_scan_power_info scan_pwr_info[IL_NUM_SCAN_RATES]; 514 }; 515 516 #define IL_TX_FIFO_BK 0 /* shared */ 517 #define IL_TX_FIFO_BE 1 518 #define IL_TX_FIFO_VI 2 /* shared */ 519 #define IL_TX_FIFO_VO 3 520 #define IL_TX_FIFO_UNUSED -1 521 522 /* Minimum number of queues. MAX_NUM is defined in hw specific files. 523 * Set the minimum to accommodate the 4 standard TX queues, 1 command 524 * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */ 525 #define IL_MIN_NUM_QUEUES 10 526 527 #define IL_DEFAULT_CMD_QUEUE_NUM 4 528 529 #define IEEE80211_DATA_LEN 2304 530 #define IEEE80211_4ADDR_LEN 30 531 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) 532 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) 533 534 struct il_frame { 535 union { 536 struct ieee80211_hdr frame; 537 struct il_tx_beacon_cmd beacon; 538 u8 raw[IEEE80211_FRAME_LEN]; 539 u8 cmd[360]; 540 } u; 541 struct list_head list; 542 }; 543 544 enum { 545 CMD_SYNC = 0, 546 CMD_SIZE_NORMAL = 0, 547 CMD_NO_SKB = 0, 548 CMD_SIZE_HUGE = (1 << 0), 549 CMD_ASYNC = (1 << 1), 550 CMD_WANT_SKB = (1 << 2), 551 CMD_MAPPED = (1 << 3), 552 }; 553 554 #define DEF_CMD_PAYLOAD_SIZE 320 555 556 /** 557 * struct il_device_cmd 558 * 559 * For allocation of the command and tx queues, this establishes the overall 560 * size of the largest command we send to uCode, except for a scan command 561 * (which is relatively huge; space is allocated separately). 562 */ 563 struct il_device_cmd { 564 struct il_cmd_header hdr; /* uCode API */ 565 union { 566 u32 flags; 567 u8 val8; 568 u16 val16; 569 u32 val32; 570 struct il_tx_cmd tx; 571 u8 payload[DEF_CMD_PAYLOAD_SIZE]; 572 } __packed cmd; 573 } __packed; 574 575 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct il_device_cmd)) 576 577 struct il_host_cmd { 578 const void *data; 579 unsigned long reply_page; 580 void (*callback) (struct il_priv *il, struct il_device_cmd *cmd, 581 struct il_rx_pkt *pkt); 582 u32 flags; 583 u16 len; 584 u8 id; 585 }; 586 587 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8 588 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4 589 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12 590 591 /** 592 * struct il_rx_queue - Rx queue 593 * @bd: driver's pointer to buffer of receive buffer descriptors (rbd) 594 * @bd_dma: bus address of buffer of receive buffer descriptors (rbd) 595 * @read: Shared idx to newest available Rx buffer 596 * @write: Shared idx to oldest written Rx packet 597 * @free_count: Number of pre-allocated buffers in rx_free 598 * @rx_free: list of free SKBs for use 599 * @rx_used: List of Rx buffers with no SKB 600 * @need_update: flag to indicate we need to update read/write idx 601 * @rb_stts: driver's pointer to receive buffer status 602 * @rb_stts_dma: bus address of receive buffer status 603 * 604 * NOTE: rx_free and rx_used are used as a FIFO for il_rx_bufs 605 */ 606 struct il_rx_queue { 607 __le32 *bd; 608 dma_addr_t bd_dma; 609 struct il_rx_buf pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; 610 struct il_rx_buf *queue[RX_QUEUE_SIZE]; 611 u32 read; 612 u32 write; 613 u32 free_count; 614 u32 write_actual; 615 struct list_head rx_free; 616 struct list_head rx_used; 617 int need_update; 618 struct il_rb_status *rb_stts; 619 dma_addr_t rb_stts_dma; 620 spinlock_t lock; 621 }; 622 623 #define IL_SUPPORTED_RATES_IE_LEN 8 624 625 #define MAX_TID_COUNT 9 626 627 #define IL_INVALID_RATE 0xFF 628 #define IL_INVALID_VALUE -1 629 630 /** 631 * struct il_ht_agg -- aggregation status while waiting for block-ack 632 * @txq_id: Tx queue used for Tx attempt 633 * @frame_count: # frames attempted by Tx command 634 * @wait_for_ba: Expect block-ack before next Tx reply 635 * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx win 636 * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx win 637 * @bitmap1: High order, one bit for each frame pending ACK in Tx win 638 * @rate_n_flags: Rate at which Tx was attempted 639 * 640 * If C_TX indicates that aggregation was attempted, driver must wait 641 * for block ack (N_COMPRESSED_BA). This struct stores tx reply info 642 * until block ack arrives. 643 */ 644 struct il_ht_agg { 645 u16 txq_id; 646 u16 frame_count; 647 u16 wait_for_ba; 648 u16 start_idx; 649 u64 bitmap; 650 u32 rate_n_flags; 651 #define IL_AGG_OFF 0 652 #define IL_AGG_ON 1 653 #define IL_EMPTYING_HW_QUEUE_ADDBA 2 654 #define IL_EMPTYING_HW_QUEUE_DELBA 3 655 u8 state; 656 }; 657 658 struct il_tid_data { 659 u16 seq_number; /* 4965 only */ 660 u16 tfds_in_queue; 661 struct il_ht_agg agg; 662 }; 663 664 struct il_hw_key { 665 u32 cipher; 666 int keylen; 667 u8 keyidx; 668 u8 key[32]; 669 }; 670 671 union il_ht_rate_supp { 672 u16 rates; 673 struct { 674 u8 siso_rate; 675 u8 mimo_rate; 676 }; 677 }; 678 679 #define CFG_HT_RX_AMPDU_FACTOR_8K (0x0) 680 #define CFG_HT_RX_AMPDU_FACTOR_16K (0x1) 681 #define CFG_HT_RX_AMPDU_FACTOR_32K (0x2) 682 #define CFG_HT_RX_AMPDU_FACTOR_64K (0x3) 683 #define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K 684 #define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K 685 #define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K 686 687 /* 688 * Maximal MPDU density for TX aggregation 689 * 4 - 2us density 690 * 5 - 4us density 691 * 6 - 8us density 692 * 7 - 16us density 693 */ 694 #define CFG_HT_MPDU_DENSITY_2USEC (0x4) 695 #define CFG_HT_MPDU_DENSITY_4USEC (0x5) 696 #define CFG_HT_MPDU_DENSITY_8USEC (0x6) 697 #define CFG_HT_MPDU_DENSITY_16USEC (0x7) 698 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC 699 #define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC 700 #define CFG_HT_MPDU_DENSITY_MIN (0x1) 701 702 struct il_ht_config { 703 bool single_chain_sufficient; 704 enum ieee80211_smps_mode smps; /* current smps mode */ 705 }; 706 707 /* QoS structures */ 708 struct il_qos_info { 709 int qos_active; 710 struct il_qosparam_cmd def_qos_parm; 711 }; 712 713 /* 714 * Structure should be accessed with sta_lock held. When station addition 715 * is in progress (IL_STA_UCODE_INPROGRESS) it is possible to access only 716 * the commands (il_addsta_cmd and il_link_quality_cmd) without 717 * sta_lock held. 718 */ 719 struct il_station_entry { 720 struct il_addsta_cmd sta; 721 struct il_tid_data tid[MAX_TID_COUNT]; 722 u8 used; 723 struct il_hw_key keyinfo; 724 struct il_link_quality_cmd *lq; 725 }; 726 727 struct il_station_priv_common { 728 u8 sta_id; 729 }; 730 731 /** 732 * struct il_vif_priv - driver's ilate per-interface information 733 * 734 * When mac80211 allocates a virtual interface, it can allocate 735 * space for us to put data into. 736 */ 737 struct il_vif_priv { 738 u8 ibss_bssid_sta_id; 739 }; 740 741 /* one for each uCode image (inst/data, boot/init/runtime) */ 742 struct fw_desc { 743 void *v_addr; /* access by driver */ 744 dma_addr_t p_addr; /* access by card's busmaster DMA */ 745 u32 len; /* bytes */ 746 }; 747 748 /* uCode file layout */ 749 struct il_ucode_header { 750 __le32 ver; /* major/minor/API/serial */ 751 struct { 752 __le32 inst_size; /* bytes of runtime code */ 753 __le32 data_size; /* bytes of runtime data */ 754 __le32 init_size; /* bytes of init code */ 755 __le32 init_data_size; /* bytes of init data */ 756 __le32 boot_size; /* bytes of bootstrap code */ 757 u8 data[0]; /* in same order as sizes */ 758 } v1; 759 }; 760 761 struct il4965_ibss_seq { 762 u8 mac[ETH_ALEN]; 763 u16 seq_num; 764 u16 frag_num; 765 unsigned long packet_time; 766 struct list_head list; 767 }; 768 769 struct il_sensitivity_ranges { 770 u16 min_nrg_cck; 771 u16 max_nrg_cck; 772 773 u16 nrg_th_cck; 774 u16 nrg_th_ofdm; 775 776 u16 auto_corr_min_ofdm; 777 u16 auto_corr_min_ofdm_mrc; 778 u16 auto_corr_min_ofdm_x1; 779 u16 auto_corr_min_ofdm_mrc_x1; 780 781 u16 auto_corr_max_ofdm; 782 u16 auto_corr_max_ofdm_mrc; 783 u16 auto_corr_max_ofdm_x1; 784 u16 auto_corr_max_ofdm_mrc_x1; 785 786 u16 auto_corr_max_cck; 787 u16 auto_corr_max_cck_mrc; 788 u16 auto_corr_min_cck; 789 u16 auto_corr_min_cck_mrc; 790 791 u16 barker_corr_th_min; 792 u16 barker_corr_th_min_mrc; 793 u16 nrg_th_cca; 794 }; 795 796 #define KELVIN_TO_CELSIUS(x) ((x)-273) 797 #define CELSIUS_TO_KELVIN(x) ((x)+273) 798 799 /** 800 * struct il_hw_params 801 * @bcast_id: f/w broadcast station ID 802 * @max_txq_num: Max # Tx queues supported 803 * @dma_chnl_num: Number of Tx DMA/FIFO channels 804 * @scd_bc_tbls_size: size of scheduler byte count tables 805 * @tfd_size: TFD size 806 * @tx/rx_chains_num: Number of TX/RX chains 807 * @valid_tx/rx_ant: usable antennas 808 * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) 809 * @max_rxq_log: Log-base-2 of max_rxq_size 810 * @rx_page_order: Rx buffer page order 811 * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR 812 * @max_stations: 813 * @ht40_channel: is 40MHz width possible in band 2.4 814 * BIT(NL80211_BAND_5GHZ) BIT(NL80211_BAND_5GHZ) 815 * @sw_crypto: 0 for hw, 1 for sw 816 * @max_xxx_size: for ucode uses 817 * @ct_kill_threshold: temperature threshold 818 * @beacon_time_tsf_bits: number of valid tsf bits for beacon time 819 * @struct il_sensitivity_ranges: range of sensitivity values 820 */ 821 struct il_hw_params { 822 u8 bcast_id; 823 u8 max_txq_num; 824 u8 dma_chnl_num; 825 u16 scd_bc_tbls_size; 826 u32 tfd_size; 827 u8 tx_chains_num; 828 u8 rx_chains_num; 829 u8 valid_tx_ant; 830 u8 valid_rx_ant; 831 u16 max_rxq_size; 832 u16 max_rxq_log; 833 u32 rx_page_order; 834 u32 rx_wrt_ptr_reg; 835 u8 max_stations; 836 u8 ht40_channel; 837 u8 max_beacon_itrvl; /* in 1024 ms */ 838 u32 max_inst_size; 839 u32 max_data_size; 840 u32 max_bsm_size; 841 u32 ct_kill_threshold; /* value in hw-dependent units */ 842 u16 beacon_time_tsf_bits; 843 const struct il_sensitivity_ranges *sens; 844 }; 845 846 /****************************************************************************** 847 * 848 * Functions implemented in core module which are forward declared here 849 * for use by iwl-[4-5].c 850 * 851 * NOTE: The implementation of these functions are not hardware specific 852 * which is why they are in the core module files. 853 * 854 * Naming convention -- 855 * il_ <-- Is part of iwlwifi 856 * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) 857 * il4965_bg_ <-- Called from work queue context 858 * il4965_mac_ <-- mac80211 callback 859 * 860 ****************************************************************************/ 861 void il4965_update_chain_flags(struct il_priv *il); 862 extern const u8 il_bcast_addr[ETH_ALEN]; 863 int il_queue_space(const struct il_queue *q); 864 static inline int 865 il_queue_used(const struct il_queue *q, int i) 866 { 867 return q->write_ptr >= q->read_ptr ? (i >= q->read_ptr && 868 i < q->write_ptr) : !(i < 869 q->read_ptr 870 && i >= 871 q-> 872 write_ptr); 873 } 874 875 static inline u8 876 il_get_cmd_idx(struct il_queue *q, u32 idx, int is_huge) 877 { 878 /* 879 * This is for init calibration result and scan command which 880 * required buffer > TFD_MAX_PAYLOAD_SIZE, 881 * the big buffer at end of command array 882 */ 883 if (is_huge) 884 return q->n_win; /* must be power of 2 */ 885 886 /* Otherwise, use normal size buffers */ 887 return idx & (q->n_win - 1); 888 } 889 890 struct il_dma_ptr { 891 dma_addr_t dma; 892 void *addr; 893 size_t size; 894 }; 895 896 #define IL_OPERATION_MODE_AUTO 0 897 #define IL_OPERATION_MODE_HT_ONLY 1 898 #define IL_OPERATION_MODE_MIXED 2 899 #define IL_OPERATION_MODE_20MHZ 3 900 901 #define IL_TX_CRC_SIZE 4 902 #define IL_TX_DELIMITER_SIZE 4 903 904 #define TX_POWER_IL_ILLEGAL_VOLTAGE -10000 905 906 /* Sensitivity and chain noise calibration */ 907 #define INITIALIZATION_VALUE 0xFFFF 908 #define IL4965_CAL_NUM_BEACONS 20 909 #define IL_CAL_NUM_BEACONS 16 910 #define MAXIMUM_ALLOWED_PATHLOSS 15 911 912 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 913 914 #define MAX_FA_OFDM 50 915 #define MIN_FA_OFDM 5 916 #define MAX_FA_CCK 50 917 #define MIN_FA_CCK 5 918 919 #define AUTO_CORR_STEP_OFDM 1 920 921 #define AUTO_CORR_STEP_CCK 3 922 #define AUTO_CORR_MAX_TH_CCK 160 923 924 #define NRG_DIFF 2 925 #define NRG_STEP_CCK 2 926 #define NRG_MARGIN 8 927 #define MAX_NUMBER_CCK_NO_FA 100 928 929 #define AUTO_CORR_CCK_MIN_VAL_DEF (125) 930 931 #define CHAIN_A 0 932 #define CHAIN_B 1 933 #define CHAIN_C 2 934 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 935 #define ALL_BAND_FILTER 0xFF00 936 #define IN_BAND_FILTER 0xFF 937 #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF 938 939 #define NRG_NUM_PREV_STAT_L 20 940 #define NUM_RX_CHAINS 3 941 942 enum il4965_false_alarm_state { 943 IL_FA_TOO_MANY = 0, 944 IL_FA_TOO_FEW = 1, 945 IL_FA_GOOD_RANGE = 2, 946 }; 947 948 enum il4965_chain_noise_state { 949 IL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ 950 IL_CHAIN_NOISE_ACCUMULATE, 951 IL_CHAIN_NOISE_CALIBRATED, 952 IL_CHAIN_NOISE_DONE, 953 }; 954 955 enum ucode_type { 956 UCODE_NONE = 0, 957 UCODE_INIT, 958 UCODE_RT 959 }; 960 961 /* Sensitivity calib data */ 962 struct il_sensitivity_data { 963 u32 auto_corr_ofdm; 964 u32 auto_corr_ofdm_mrc; 965 u32 auto_corr_ofdm_x1; 966 u32 auto_corr_ofdm_mrc_x1; 967 u32 auto_corr_cck; 968 u32 auto_corr_cck_mrc; 969 970 u32 last_bad_plcp_cnt_ofdm; 971 u32 last_fa_cnt_ofdm; 972 u32 last_bad_plcp_cnt_cck; 973 u32 last_fa_cnt_cck; 974 975 u32 nrg_curr_state; 976 u32 nrg_prev_state; 977 u32 nrg_value[10]; 978 u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; 979 u32 nrg_silence_ref; 980 u32 nrg_energy_idx; 981 u32 nrg_silence_idx; 982 u32 nrg_th_cck; 983 s32 nrg_auto_corr_silence_diff; 984 u32 num_in_cck_no_fa; 985 u32 nrg_th_ofdm; 986 987 u16 barker_corr_th_min; 988 u16 barker_corr_th_min_mrc; 989 u16 nrg_th_cca; 990 }; 991 992 /* Chain noise (differential Rx gain) calib data */ 993 struct il_chain_noise_data { 994 u32 active_chains; 995 u32 chain_noise_a; 996 u32 chain_noise_b; 997 u32 chain_noise_c; 998 u32 chain_signal_a; 999 u32 chain_signal_b; 1000 u32 chain_signal_c; 1001 u16 beacon_count; 1002 u8 disconn_array[NUM_RX_CHAINS]; 1003 u8 delta_gain_code[NUM_RX_CHAINS]; 1004 u8 radio_write; 1005 u8 state; 1006 }; 1007 1008 #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ 1009 #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ 1010 1011 #define IL_TRAFFIC_ENTRIES (256) 1012 #define IL_TRAFFIC_ENTRY_SIZE (64) 1013 1014 enum { 1015 MEASUREMENT_READY = (1 << 0), 1016 MEASUREMENT_ACTIVE = (1 << 1), 1017 }; 1018 1019 /* interrupt stats */ 1020 struct isr_stats { 1021 u32 hw; 1022 u32 sw; 1023 u32 err_code; 1024 u32 sch; 1025 u32 alive; 1026 u32 rfkill; 1027 u32 ctkill; 1028 u32 wakeup; 1029 u32 rx; 1030 u32 handlers[IL_CN_MAX]; 1031 u32 tx; 1032 u32 unhandled; 1033 }; 1034 1035 /* management stats */ 1036 enum il_mgmt_stats { 1037 MANAGEMENT_ASSOC_REQ = 0, 1038 MANAGEMENT_ASSOC_RESP, 1039 MANAGEMENT_REASSOC_REQ, 1040 MANAGEMENT_REASSOC_RESP, 1041 MANAGEMENT_PROBE_REQ, 1042 MANAGEMENT_PROBE_RESP, 1043 MANAGEMENT_BEACON, 1044 MANAGEMENT_ATIM, 1045 MANAGEMENT_DISASSOC, 1046 MANAGEMENT_AUTH, 1047 MANAGEMENT_DEAUTH, 1048 MANAGEMENT_ACTION, 1049 MANAGEMENT_MAX, 1050 }; 1051 /* control stats */ 1052 enum il_ctrl_stats { 1053 CONTROL_BACK_REQ = 0, 1054 CONTROL_BACK, 1055 CONTROL_PSPOLL, 1056 CONTROL_RTS, 1057 CONTROL_CTS, 1058 CONTROL_ACK, 1059 CONTROL_CFEND, 1060 CONTROL_CFENDACK, 1061 CONTROL_MAX, 1062 }; 1063 1064 struct traffic_stats { 1065 #ifdef CONFIG_IWLEGACY_DEBUGFS 1066 u32 mgmt[MANAGEMENT_MAX]; 1067 u32 ctrl[CONTROL_MAX]; 1068 u32 data_cnt; 1069 u64 data_bytes; 1070 #endif 1071 }; 1072 1073 /* 1074 * host interrupt timeout value 1075 * used with setting interrupt coalescing timer 1076 * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit 1077 * 1078 * default interrupt coalescing timer is 64 x 32 = 2048 usecs 1079 * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs 1080 */ 1081 #define IL_HOST_INT_TIMEOUT_MAX (0xFF) 1082 #define IL_HOST_INT_TIMEOUT_DEF (0x40) 1083 #define IL_HOST_INT_TIMEOUT_MIN (0x0) 1084 #define IL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF) 1085 #define IL_HOST_INT_CALIB_TIMEOUT_DEF (0x10) 1086 #define IL_HOST_INT_CALIB_TIMEOUT_MIN (0x0) 1087 1088 #define IL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5) 1089 1090 /* TX queue watchdog timeouts in mSecs */ 1091 #define IL_DEF_WD_TIMEOUT (2000) 1092 #define IL_LONG_WD_TIMEOUT (10000) 1093 #define IL_MAX_WD_TIMEOUT (120000) 1094 1095 struct il_force_reset { 1096 int reset_request_count; 1097 int reset_success_count; 1098 int reset_reject_count; 1099 unsigned long reset_duration; 1100 unsigned long last_force_reset_jiffies; 1101 }; 1102 1103 /* extend beacon time format bit shifting */ 1104 /* 1105 * for _3945 devices 1106 * bits 31:24 - extended 1107 * bits 23:0 - interval 1108 */ 1109 #define IL3945_EXT_BEACON_TIME_POS 24 1110 /* 1111 * for _4965 devices 1112 * bits 31:22 - extended 1113 * bits 21:0 - interval 1114 */ 1115 #define IL4965_EXT_BEACON_TIME_POS 22 1116 1117 struct il_rxon_context { 1118 struct ieee80211_vif *vif; 1119 }; 1120 1121 struct il_power_mgr { 1122 struct il_powertable_cmd sleep_cmd; 1123 struct il_powertable_cmd sleep_cmd_next; 1124 int debug_sleep_level_override; 1125 bool pci_pm; 1126 bool ps_disabled; 1127 }; 1128 1129 struct il_priv { 1130 struct ieee80211_hw *hw; 1131 struct ieee80211_channel *ieee_channels; 1132 struct ieee80211_rate *ieee_rates; 1133 1134 struct il_cfg *cfg; 1135 const struct il_ops *ops; 1136 #ifdef CONFIG_IWLEGACY_DEBUGFS 1137 const struct il_debugfs_ops *debugfs_ops; 1138 #endif 1139 1140 /* temporary frame storage list */ 1141 struct list_head free_frames; 1142 int frames_count; 1143 1144 enum nl80211_band band; 1145 int alloc_rxb_page; 1146 1147 void (*handlers[IL_CN_MAX]) (struct il_priv *il, 1148 struct il_rx_buf *rxb); 1149 1150 struct ieee80211_supported_band bands[NUM_NL80211_BANDS]; 1151 1152 /* spectrum measurement report caching */ 1153 struct il_spectrum_notification measure_report; 1154 u8 measurement_status; 1155 1156 /* ucode beacon time */ 1157 u32 ucode_beacon_time; 1158 int missed_beacon_threshold; 1159 1160 /* track IBSS manager (last beacon) status */ 1161 u32 ibss_manager; 1162 1163 /* force reset */ 1164 struct il_force_reset force_reset; 1165 1166 /* we allocate array of il_channel_info for NIC's valid channels. 1167 * Access via channel # using indirect idx array */ 1168 struct il_channel_info *channel_info; /* channel info array */ 1169 u8 channel_count; /* # of channels */ 1170 1171 /* thermal calibration */ 1172 s32 temperature; /* degrees Kelvin */ 1173 s32 last_temperature; 1174 1175 /* Scan related variables */ 1176 unsigned long scan_start; 1177 unsigned long scan_start_tsf; 1178 void *scan_cmd; 1179 enum nl80211_band scan_band; 1180 struct cfg80211_scan_request *scan_request; 1181 struct ieee80211_vif *scan_vif; 1182 u8 scan_tx_ant[NUM_NL80211_BANDS]; 1183 u8 mgmt_tx_ant; 1184 1185 /* spinlock */ 1186 spinlock_t lock; /* protect general shared data */ 1187 spinlock_t hcmd_lock; /* protect hcmd */ 1188 spinlock_t reg_lock; /* protect hw register access */ 1189 struct mutex mutex; 1190 1191 /* basic pci-network driver stuff */ 1192 struct pci_dev *pci_dev; 1193 1194 /* pci hardware address support */ 1195 void __iomem *hw_base; 1196 u32 hw_rev; 1197 u32 hw_wa_rev; 1198 u8 rev_id; 1199 1200 /* command queue number */ 1201 u8 cmd_queue; 1202 1203 /* max number of station keys */ 1204 u8 sta_key_max_num; 1205 1206 /* EEPROM MAC addresses */ 1207 struct mac_address addresses[1]; 1208 1209 /* uCode images, save to reload in case of failure */ 1210 int fw_idx; /* firmware we're trying to load */ 1211 u32 ucode_ver; /* version of ucode, copy of 1212 il_ucode.ver */ 1213 struct fw_desc ucode_code; /* runtime inst */ 1214 struct fw_desc ucode_data; /* runtime data original */ 1215 struct fw_desc ucode_data_backup; /* runtime data save/restore */ 1216 struct fw_desc ucode_init; /* initialization inst */ 1217 struct fw_desc ucode_init_data; /* initialization data */ 1218 struct fw_desc ucode_boot; /* bootstrap inst */ 1219 enum ucode_type ucode_type; 1220 u8 ucode_write_complete; /* the image write is complete */ 1221 char firmware_name[25]; 1222 1223 struct ieee80211_vif *vif; 1224 1225 struct il_qos_info qos_data; 1226 1227 struct { 1228 bool enabled; 1229 bool is_40mhz; 1230 bool non_gf_sta_present; 1231 u8 protection; 1232 u8 extension_chan_offset; 1233 } ht; 1234 1235 /* 1236 * We declare this const so it can only be 1237 * changed via explicit cast within the 1238 * routines that actually update the physical 1239 * hardware. 1240 */ 1241 const struct il_rxon_cmd active; 1242 struct il_rxon_cmd staging; 1243 1244 struct il_rxon_time_cmd timing; 1245 1246 __le16 switch_channel; 1247 1248 /* 1st responses from initialize and runtime uCode images. 1249 * _4965's initialize alive response contains some calibration data. */ 1250 struct il_init_alive_resp card_alive_init; 1251 struct il_alive_resp card_alive; 1252 1253 u16 active_rate; 1254 1255 u8 start_calib; 1256 struct il_sensitivity_data sensitivity_data; 1257 struct il_chain_noise_data chain_noise_data; 1258 __le16 sensitivity_tbl[HD_TBL_SIZE]; 1259 1260 struct il_ht_config current_ht_config; 1261 1262 /* Rate scaling data */ 1263 u8 retry_rate; 1264 1265 wait_queue_head_t wait_command_queue; 1266 1267 int activity_timer_active; 1268 1269 /* Rx and Tx DMA processing queues */ 1270 struct il_rx_queue rxq; 1271 struct il_tx_queue *txq; 1272 unsigned long txq_ctx_active_msk; 1273 struct il_dma_ptr kw; /* keep warm address */ 1274 struct il_dma_ptr scd_bc_tbls; 1275 1276 u32 scd_base_addr; /* scheduler sram base address */ 1277 1278 unsigned long status; 1279 1280 /* counts mgmt, ctl, and data packets */ 1281 struct traffic_stats tx_stats; 1282 struct traffic_stats rx_stats; 1283 1284 /* counts interrupts */ 1285 struct isr_stats isr_stats; 1286 1287 struct il_power_mgr power_data; 1288 1289 /* context information */ 1290 u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */ 1291 1292 /* station table variables */ 1293 1294 /* Note: if lock and sta_lock are needed, lock must be acquired first */ 1295 spinlock_t sta_lock; 1296 int num_stations; 1297 struct il_station_entry stations[IL_STATION_COUNT]; 1298 unsigned long ucode_key_table; 1299 1300 /* queue refcounts */ 1301 #define IL_MAX_HW_QUEUES 32 1302 unsigned long queue_stopped[BITS_TO_LONGS(IL_MAX_HW_QUEUES)]; 1303 #define IL_STOP_REASON_PASSIVE 0 1304 unsigned long stop_reason; 1305 /* for each AC */ 1306 atomic_t queue_stop_count[4]; 1307 1308 /* Indication if ieee80211_ops->open has been called */ 1309 u8 is_open; 1310 1311 u8 mac80211_registered; 1312 1313 /* eeprom -- this is in the card's little endian byte order */ 1314 u8 *eeprom; 1315 struct il_eeprom_calib_info *calib_info; 1316 1317 enum nl80211_iftype iw_mode; 1318 1319 /* Last Rx'd beacon timestamp */ 1320 u64 timestamp; 1321 1322 union { 1323 #if IS_ENABLED(CONFIG_IWL3945) 1324 struct { 1325 void *shared_virt; 1326 dma_addr_t shared_phys; 1327 1328 struct delayed_work thermal_periodic; 1329 struct delayed_work rfkill_poll; 1330 1331 struct il3945_notif_stats stats; 1332 #ifdef CONFIG_IWLEGACY_DEBUGFS 1333 struct il3945_notif_stats accum_stats; 1334 struct il3945_notif_stats delta_stats; 1335 struct il3945_notif_stats max_delta; 1336 #endif 1337 1338 u32 sta_supp_rates; 1339 int last_rx_rssi; /* From Rx packet stats */ 1340 1341 /* Rx'd packet timing information */ 1342 u32 last_beacon_time; 1343 u64 last_tsf; 1344 1345 /* 1346 * each calibration channel group in the 1347 * EEPROM has a derived clip setting for 1348 * each rate. 1349 */ 1350 const struct il3945_clip_group clip_groups[5]; 1351 1352 } _3945; 1353 #endif 1354 #if IS_ENABLED(CONFIG_IWL4965) 1355 struct { 1356 struct il_rx_phy_res last_phy_res; 1357 bool last_phy_res_valid; 1358 u32 ampdu_ref; 1359 1360 struct completion firmware_loading_complete; 1361 1362 /* 1363 * chain noise reset and gain commands are the 1364 * two extra calibration commands follows the standard 1365 * phy calibration commands 1366 */ 1367 u8 phy_calib_chain_noise_reset_cmd; 1368 u8 phy_calib_chain_noise_gain_cmd; 1369 1370 u8 key_mapping_keys; 1371 struct il_wep_key wep_keys[WEP_KEYS_MAX]; 1372 1373 struct il_notif_stats stats; 1374 #ifdef CONFIG_IWLEGACY_DEBUGFS 1375 struct il_notif_stats accum_stats; 1376 struct il_notif_stats delta_stats; 1377 struct il_notif_stats max_delta; 1378 #endif 1379 1380 } _4965; 1381 #endif 1382 }; 1383 1384 struct il_hw_params hw_params; 1385 1386 u32 inta_mask; 1387 1388 struct workqueue_struct *workqueue; 1389 1390 struct work_struct restart; 1391 struct work_struct scan_completed; 1392 struct work_struct rx_replenish; 1393 struct work_struct abort_scan; 1394 1395 bool beacon_enabled; 1396 struct sk_buff *beacon_skb; 1397 1398 struct work_struct tx_flush; 1399 1400 struct tasklet_struct irq_tasklet; 1401 1402 struct delayed_work init_alive_start; 1403 struct delayed_work alive_start; 1404 struct delayed_work scan_check; 1405 1406 /* TX Power */ 1407 s8 tx_power_user_lmt; 1408 s8 tx_power_device_lmt; 1409 s8 tx_power_next; 1410 1411 #ifdef CONFIG_IWLEGACY_DEBUG 1412 /* debugging info */ 1413 u32 debug_level; /* per device debugging will override global 1414 il_debug_level if set */ 1415 #endif /* CONFIG_IWLEGACY_DEBUG */ 1416 #ifdef CONFIG_IWLEGACY_DEBUGFS 1417 /* debugfs */ 1418 u16 tx_traffic_idx; 1419 u16 rx_traffic_idx; 1420 u8 *tx_traffic; 1421 u8 *rx_traffic; 1422 struct dentry *debugfs_dir; 1423 u32 dbgfs_sram_offset, dbgfs_sram_len; 1424 bool disable_ht40; 1425 #endif /* CONFIG_IWLEGACY_DEBUGFS */ 1426 1427 struct work_struct txpower_work; 1428 bool disable_sens_cal; 1429 bool disable_chain_noise_cal; 1430 bool disable_tx_power_cal; 1431 struct work_struct run_time_calib_work; 1432 struct timer_list stats_periodic; 1433 struct timer_list watchdog; 1434 bool hw_ready; 1435 1436 struct led_classdev led; 1437 unsigned long blink_on, blink_off; 1438 bool led_registered; 1439 }; /*il_priv */ 1440 1441 static inline void 1442 il_txq_ctx_activate(struct il_priv *il, int txq_id) 1443 { 1444 set_bit(txq_id, &il->txq_ctx_active_msk); 1445 } 1446 1447 static inline void 1448 il_txq_ctx_deactivate(struct il_priv *il, int txq_id) 1449 { 1450 clear_bit(txq_id, &il->txq_ctx_active_msk); 1451 } 1452 1453 static inline int 1454 il_is_associated(struct il_priv *il) 1455 { 1456 return (il->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; 1457 } 1458 1459 static inline int 1460 il_is_any_associated(struct il_priv *il) 1461 { 1462 return il_is_associated(il); 1463 } 1464 1465 static inline int 1466 il_is_channel_valid(const struct il_channel_info *ch_info) 1467 { 1468 if (ch_info == NULL) 1469 return 0; 1470 return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; 1471 } 1472 1473 static inline int 1474 il_is_channel_radar(const struct il_channel_info *ch_info) 1475 { 1476 return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; 1477 } 1478 1479 static inline u8 1480 il_is_channel_a_band(const struct il_channel_info *ch_info) 1481 { 1482 return ch_info->band == NL80211_BAND_5GHZ; 1483 } 1484 1485 static inline int 1486 il_is_channel_passive(const struct il_channel_info *ch) 1487 { 1488 return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; 1489 } 1490 1491 static inline int 1492 il_is_channel_ibss(const struct il_channel_info *ch) 1493 { 1494 return (ch->flags & EEPROM_CHANNEL_IBSS) ? 1 : 0; 1495 } 1496 1497 static inline void 1498 __il_free_pages(struct il_priv *il, struct page *page) 1499 { 1500 __free_pages(page, il->hw_params.rx_page_order); 1501 il->alloc_rxb_page--; 1502 } 1503 1504 static inline void 1505 il_free_pages(struct il_priv *il, unsigned long page) 1506 { 1507 free_pages(page, il->hw_params.rx_page_order); 1508 il->alloc_rxb_page--; 1509 } 1510 1511 #define IWLWIFI_VERSION "in-tree:" 1512 #define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation" 1513 #define DRV_AUTHOR "<ilw@linux.intel.com>" 1514 1515 #define IL_PCI_DEVICE(dev, subdev, cfg) \ 1516 .vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \ 1517 .subvendor = PCI_ANY_ID, .subdevice = (subdev), \ 1518 .driver_data = (kernel_ulong_t)&(cfg) 1519 1520 #define TIME_UNIT 1024 1521 1522 #define IL_SKU_G 0x1 1523 #define IL_SKU_A 0x2 1524 #define IL_SKU_N 0x8 1525 1526 #define IL_CMD(x) case x: return #x 1527 1528 /* Size of one Rx buffer in host DRAM */ 1529 #define IL_RX_BUF_SIZE_3K (3 * 1000) /* 3945 only */ 1530 #define IL_RX_BUF_SIZE_4K (4 * 1024) 1531 #define IL_RX_BUF_SIZE_8K (8 * 1024) 1532 1533 #ifdef CONFIG_IWLEGACY_DEBUGFS 1534 struct il_debugfs_ops { 1535 ssize_t(*rx_stats_read) (struct file *file, char __user *user_buf, 1536 size_t count, loff_t *ppos); 1537 ssize_t(*tx_stats_read) (struct file *file, char __user *user_buf, 1538 size_t count, loff_t *ppos); 1539 ssize_t(*general_stats_read) (struct file *file, 1540 char __user *user_buf, size_t count, 1541 loff_t *ppos); 1542 }; 1543 #endif 1544 1545 struct il_ops { 1546 /* Handling TX */ 1547 void (*txq_update_byte_cnt_tbl) (struct il_priv *il, 1548 struct il_tx_queue *txq, 1549 u16 byte_cnt); 1550 int (*txq_attach_buf_to_tfd) (struct il_priv *il, 1551 struct il_tx_queue *txq, dma_addr_t addr, 1552 u16 len, u8 reset, u8 pad); 1553 void (*txq_free_tfd) (struct il_priv *il, struct il_tx_queue *txq); 1554 int (*txq_init) (struct il_priv *il, struct il_tx_queue *txq); 1555 /* alive notification after init uCode load */ 1556 void (*init_alive_start) (struct il_priv *il); 1557 /* check validity of rtc data address */ 1558 int (*is_valid_rtc_data_addr) (u32 addr); 1559 /* 1st ucode load */ 1560 int (*load_ucode) (struct il_priv *il); 1561 1562 void (*dump_nic_error_log) (struct il_priv *il); 1563 int (*dump_fh) (struct il_priv *il, char **buf, bool display); 1564 int (*set_channel_switch) (struct il_priv *il, 1565 struct ieee80211_channel_switch *ch_switch); 1566 /* power management */ 1567 int (*apm_init) (struct il_priv *il); 1568 1569 /* tx power */ 1570 int (*send_tx_power) (struct il_priv *il); 1571 void (*update_chain_flags) (struct il_priv *il); 1572 1573 /* eeprom operations */ 1574 int (*eeprom_acquire_semaphore) (struct il_priv *il); 1575 void (*eeprom_release_semaphore) (struct il_priv *il); 1576 1577 int (*rxon_assoc) (struct il_priv *il); 1578 int (*commit_rxon) (struct il_priv *il); 1579 void (*set_rxon_chain) (struct il_priv *il); 1580 1581 u16(*get_hcmd_size) (u8 cmd_id, u16 len); 1582 u16(*build_addsta_hcmd) (const struct il_addsta_cmd *cmd, u8 *data); 1583 1584 int (*request_scan) (struct il_priv *il, struct ieee80211_vif *vif); 1585 void (*post_scan) (struct il_priv *il); 1586 void (*post_associate) (struct il_priv *il); 1587 void (*config_ap) (struct il_priv *il); 1588 /* station management */ 1589 int (*update_bcast_stations) (struct il_priv *il); 1590 int (*manage_ibss_station) (struct il_priv *il, 1591 struct ieee80211_vif *vif, bool add); 1592 1593 int (*send_led_cmd) (struct il_priv *il, struct il_led_cmd *led_cmd); 1594 }; 1595 1596 struct il_mod_params { 1597 int sw_crypto; /* def: 0 = using hardware encryption */ 1598 int disable_hw_scan; /* def: 0 = use h/w scan */ 1599 int num_of_queues; /* def: HW dependent */ 1600 int disable_11n; /* def: 0 = 11n capabilities enabled */ 1601 int amsdu_size_8K; /* def: 0 = disable 8K amsdu size */ 1602 int antenna; /* def: 0 = both antennas (use diversity) */ 1603 int restart_fw; /* def: 1 = restart firmware */ 1604 }; 1605 1606 #define IL_LED_SOLID 11 1607 #define IL_DEF_LED_INTRVL cpu_to_le32(1000) 1608 1609 #define IL_LED_ACTIVITY (0<<1) 1610 #define IL_LED_LINK (1<<1) 1611 1612 /* 1613 * LED mode 1614 * IL_LED_DEFAULT: use device default 1615 * IL_LED_RF_STATE: turn LED on/off based on RF state 1616 * LED ON = RF ON 1617 * LED OFF = RF OFF 1618 * IL_LED_BLINK: adjust led blink rate based on blink table 1619 */ 1620 enum il_led_mode { 1621 IL_LED_DEFAULT, 1622 IL_LED_RF_STATE, 1623 IL_LED_BLINK, 1624 }; 1625 1626 void il_leds_init(struct il_priv *il); 1627 void il_leds_exit(struct il_priv *il); 1628 1629 /** 1630 * struct il_cfg 1631 * @fw_name_pre: Firmware filename prefix. The api version and extension 1632 * (.ucode) will be added to filename before loading from disk. The 1633 * filename is constructed as fw_name_pre<api>.ucode. 1634 * @ucode_api_max: Highest version of uCode API supported by driver. 1635 * @ucode_api_min: Lowest version of uCode API supported by driver. 1636 * @scan_antennas: available antenna for scan operation 1637 * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) 1638 * 1639 * We enable the driver to be backward compatible wrt API version. The 1640 * driver specifies which APIs it supports (with @ucode_api_max being the 1641 * highest and @ucode_api_min the lowest). Firmware will only be loaded if 1642 * it has a supported API version. The firmware's API version will be 1643 * stored in @il_priv, enabling the driver to make runtime changes based 1644 * on firmware version used. 1645 * 1646 * For example, 1647 * if (IL_UCODE_API(il->ucode_ver) >= 2) { 1648 * Driver interacts with Firmware API version >= 2. 1649 * } else { 1650 * Driver interacts with Firmware API version 1. 1651 * } 1652 * 1653 * The ideal usage of this infrastructure is to treat a new ucode API 1654 * release as a new hardware revision. That is, through utilizing the 1655 * il_hcmd_utils_ops etc. we accommodate different command structures 1656 * and flows between hardware versions as well as their API 1657 * versions. 1658 * 1659 */ 1660 struct il_cfg { 1661 /* params specific to an individual device within a device family */ 1662 const char *name; 1663 const char *fw_name_pre; 1664 const unsigned int ucode_api_max; 1665 const unsigned int ucode_api_min; 1666 u8 valid_tx_ant; 1667 u8 valid_rx_ant; 1668 unsigned int sku; 1669 u16 eeprom_ver; 1670 u16 eeprom_calib_ver; 1671 /* module based parameters which can be set from modprobe cmd */ 1672 const struct il_mod_params *mod_params; 1673 /* params not likely to change within a device family */ 1674 struct il_base_params *base_params; 1675 /* params likely to change within a device family */ 1676 u8 scan_rx_antennas[NUM_NL80211_BANDS]; 1677 enum il_led_mode led_mode; 1678 1679 int eeprom_size; 1680 int num_of_queues; /* def: HW dependent */ 1681 int num_of_ampdu_queues; /* def: HW dependent */ 1682 /* for il_apm_init() */ 1683 u32 pll_cfg_val; 1684 bool set_l0s; 1685 bool use_bsm; 1686 1687 u16 led_compensation; 1688 int chain_noise_num_beacons; 1689 unsigned int wd_timeout; 1690 bool temperature_kelvin; 1691 const bool ucode_tracing; 1692 const bool sensitivity_calib_by_driver; 1693 const bool chain_noise_calib_by_driver; 1694 1695 const u32 regulatory_bands[7]; 1696 }; 1697 1698 /*************************** 1699 * L i b * 1700 ***************************/ 1701 1702 int il_mac_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 1703 u16 queue, const struct ieee80211_tx_queue_params *params); 1704 int il_mac_tx_last_beacon(struct ieee80211_hw *hw); 1705 1706 void il_set_rxon_hwcrypto(struct il_priv *il, int hw_decrypt); 1707 int il_check_rxon_cmd(struct il_priv *il); 1708 int il_full_rxon_required(struct il_priv *il); 1709 int il_set_rxon_channel(struct il_priv *il, struct ieee80211_channel *ch); 1710 void il_set_flags_for_band(struct il_priv *il, enum nl80211_band band, 1711 struct ieee80211_vif *vif); 1712 u8 il_get_single_channel_number(struct il_priv *il, enum nl80211_band band); 1713 void il_set_rxon_ht(struct il_priv *il, struct il_ht_config *ht_conf); 1714 bool il_is_ht40_tx_allowed(struct il_priv *il, 1715 struct ieee80211_sta_ht_cap *ht_cap); 1716 void il_connection_init_rx_config(struct il_priv *il); 1717 void il_set_rate(struct il_priv *il); 1718 int il_set_decrypted_flag(struct il_priv *il, struct ieee80211_hdr *hdr, 1719 u32 decrypt_res, struct ieee80211_rx_status *stats); 1720 void il_irq_handle_error(struct il_priv *il); 1721 int il_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif); 1722 void il_mac_remove_interface(struct ieee80211_hw *hw, 1723 struct ieee80211_vif *vif); 1724 int il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 1725 enum nl80211_iftype newtype, bool newp2p); 1726 void il_mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 1727 u32 queues, bool drop); 1728 int il_alloc_txq_mem(struct il_priv *il); 1729 void il_free_txq_mem(struct il_priv *il); 1730 1731 #ifdef CONFIG_IWLEGACY_DEBUGFS 1732 void il_update_stats(struct il_priv *il, bool is_tx, __le16 fc, u16 len); 1733 #else 1734 static inline void 1735 il_update_stats(struct il_priv *il, bool is_tx, __le16 fc, u16 len) 1736 { 1737 } 1738 #endif 1739 1740 /***************************************************** 1741 * Handlers 1742 ***************************************************/ 1743 void il_hdl_pm_sleep(struct il_priv *il, struct il_rx_buf *rxb); 1744 void il_hdl_pm_debug_stats(struct il_priv *il, struct il_rx_buf *rxb); 1745 void il_hdl_error(struct il_priv *il, struct il_rx_buf *rxb); 1746 void il_hdl_csa(struct il_priv *il, struct il_rx_buf *rxb); 1747 1748 /***************************************************** 1749 * RX 1750 ******************************************************/ 1751 void il_cmd_queue_unmap(struct il_priv *il); 1752 void il_cmd_queue_free(struct il_priv *il); 1753 int il_rx_queue_alloc(struct il_priv *il); 1754 void il_rx_queue_update_write_ptr(struct il_priv *il, struct il_rx_queue *q); 1755 int il_rx_queue_space(const struct il_rx_queue *q); 1756 void il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb); 1757 1758 void il_hdl_spectrum_measurement(struct il_priv *il, struct il_rx_buf *rxb); 1759 void il_recover_from_stats(struct il_priv *il, struct il_rx_pkt *pkt); 1760 void il_chswitch_done(struct il_priv *il, bool is_success); 1761 1762 /***************************************************** 1763 * TX 1764 ******************************************************/ 1765 void il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq); 1766 int il_tx_queue_init(struct il_priv *il, u32 txq_id); 1767 void il_tx_queue_reset(struct il_priv *il, u32 txq_id); 1768 void il_tx_queue_unmap(struct il_priv *il, int txq_id); 1769 void il_tx_queue_free(struct il_priv *il, int txq_id); 1770 void il_setup_watchdog(struct il_priv *il); 1771 /***************************************************** 1772 * TX power 1773 ****************************************************/ 1774 int il_set_tx_power(struct il_priv *il, s8 tx_power, bool force); 1775 1776 /******************************************************************************* 1777 * Rate 1778 ******************************************************************************/ 1779 1780 u8 il_get_lowest_plcp(struct il_priv *il); 1781 1782 /******************************************************************************* 1783 * Scanning 1784 ******************************************************************************/ 1785 void il_init_scan_params(struct il_priv *il); 1786 int il_scan_cancel(struct il_priv *il); 1787 int il_scan_cancel_timeout(struct il_priv *il, unsigned long ms); 1788 void il_force_scan_end(struct il_priv *il); 1789 int il_mac_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 1790 struct ieee80211_scan_request *hw_req); 1791 void il_internal_short_hw_scan(struct il_priv *il); 1792 int il_force_reset(struct il_priv *il, bool external); 1793 u16 il_fill_probe_req(struct il_priv *il, struct ieee80211_mgmt *frame, 1794 const u8 *ta, const u8 *ie, int ie_len, int left); 1795 void il_setup_rx_scan_handlers(struct il_priv *il); 1796 u16 il_get_active_dwell_time(struct il_priv *il, enum nl80211_band band, 1797 u8 n_probes); 1798 u16 il_get_passive_dwell_time(struct il_priv *il, enum nl80211_band band, 1799 struct ieee80211_vif *vif); 1800 void il_setup_scan_deferred_work(struct il_priv *il); 1801 void il_cancel_scan_deferred_work(struct il_priv *il); 1802 1803 /* For faster active scanning, scan will move to the next channel if fewer than 1804 * PLCP_QUIET_THRESH packets are heard on this channel within 1805 * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell 1806 * time if it's a quiet channel (nothing responded to our probe, and there's 1807 * no other traffic). 1808 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ 1809 #define IL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */ 1810 #define IL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */ 1811 1812 #define IL_SCAN_CHECK_WATCHDOG (HZ * 7) 1813 1814 /***************************************************** 1815 * S e n d i n g H o s t C o m m a n d s * 1816 *****************************************************/ 1817 1818 const char *il_get_cmd_string(u8 cmd); 1819 int __must_check il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd); 1820 int il_send_cmd(struct il_priv *il, struct il_host_cmd *cmd); 1821 int __must_check il_send_cmd_pdu(struct il_priv *il, u8 id, u16 len, 1822 const void *data); 1823 int il_send_cmd_pdu_async(struct il_priv *il, u8 id, u16 len, const void *data, 1824 void (*callback) (struct il_priv *il, 1825 struct il_device_cmd *cmd, 1826 struct il_rx_pkt *pkt)); 1827 1828 int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd); 1829 1830 /***************************************************** 1831 * PCI * 1832 *****************************************************/ 1833 1834 void il_bg_watchdog(unsigned long data); 1835 u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval); 1836 __le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon, 1837 u32 beacon_interval); 1838 1839 #ifdef CONFIG_PM_SLEEP 1840 extern const struct dev_pm_ops il_pm_ops; 1841 1842 #define IL_LEGACY_PM_OPS (&il_pm_ops) 1843 1844 #else /* !CONFIG_PM_SLEEP */ 1845 1846 #define IL_LEGACY_PM_OPS NULL 1847 1848 #endif /* !CONFIG_PM_SLEEP */ 1849 1850 /***************************************************** 1851 * Error Handling Debugging 1852 ******************************************************/ 1853 void il4965_dump_nic_error_log(struct il_priv *il); 1854 #ifdef CONFIG_IWLEGACY_DEBUG 1855 void il_print_rx_config_cmd(struct il_priv *il); 1856 #else 1857 static inline void 1858 il_print_rx_config_cmd(struct il_priv *il) 1859 { 1860 } 1861 #endif 1862 1863 void il_clear_isr_stats(struct il_priv *il); 1864 1865 /***************************************************** 1866 * GEOS 1867 ******************************************************/ 1868 int il_init_geos(struct il_priv *il); 1869 void il_free_geos(struct il_priv *il); 1870 1871 /*************** DRIVER STATUS FUNCTIONS *****/ 1872 1873 #define S_HCMD_ACTIVE 0 /* host command in progress */ 1874 /* 1 is unused (used to be S_HCMD_SYNC_ACTIVE) */ 1875 #define S_INT_ENABLED 2 1876 #define S_RFKILL 3 1877 #define S_CT_KILL 4 1878 #define S_INIT 5 1879 #define S_ALIVE 6 1880 #define S_READY 7 1881 #define S_TEMPERATURE 8 1882 #define S_GEO_CONFIGURED 9 1883 #define S_EXIT_PENDING 10 1884 #define S_STATS 12 1885 #define S_SCANNING 13 1886 #define S_SCAN_ABORTING 14 1887 #define S_SCAN_HW 15 1888 #define S_POWER_PMI 16 1889 #define S_FW_ERROR 17 1890 #define S_CHANNEL_SWITCH_PENDING 18 1891 1892 static inline int 1893 il_is_ready(struct il_priv *il) 1894 { 1895 /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are 1896 * set but EXIT_PENDING is not */ 1897 return test_bit(S_READY, &il->status) && 1898 test_bit(S_GEO_CONFIGURED, &il->status) && 1899 !test_bit(S_EXIT_PENDING, &il->status); 1900 } 1901 1902 static inline int 1903 il_is_alive(struct il_priv *il) 1904 { 1905 return test_bit(S_ALIVE, &il->status); 1906 } 1907 1908 static inline int 1909 il_is_init(struct il_priv *il) 1910 { 1911 return test_bit(S_INIT, &il->status); 1912 } 1913 1914 static inline int 1915 il_is_rfkill(struct il_priv *il) 1916 { 1917 return test_bit(S_RFKILL, &il->status); 1918 } 1919 1920 static inline int 1921 il_is_ctkill(struct il_priv *il) 1922 { 1923 return test_bit(S_CT_KILL, &il->status); 1924 } 1925 1926 static inline int 1927 il_is_ready_rf(struct il_priv *il) 1928 { 1929 1930 if (il_is_rfkill(il)) 1931 return 0; 1932 1933 return il_is_ready(il); 1934 } 1935 1936 void il_send_bt_config(struct il_priv *il); 1937 int il_send_stats_request(struct il_priv *il, u8 flags, bool clear); 1938 void il_apm_stop(struct il_priv *il); 1939 void _il_apm_stop(struct il_priv *il); 1940 1941 int il_apm_init(struct il_priv *il); 1942 1943 int il_send_rxon_timing(struct il_priv *il); 1944 1945 static inline int 1946 il_send_rxon_assoc(struct il_priv *il) 1947 { 1948 return il->ops->rxon_assoc(il); 1949 } 1950 1951 static inline int 1952 il_commit_rxon(struct il_priv *il) 1953 { 1954 return il->ops->commit_rxon(il); 1955 } 1956 1957 static inline const struct ieee80211_supported_band * 1958 il_get_hw_mode(struct il_priv *il, enum nl80211_band band) 1959 { 1960 return il->hw->wiphy->bands[band]; 1961 } 1962 1963 /* mac80211 handlers */ 1964 int il_mac_config(struct ieee80211_hw *hw, u32 changed); 1965 void il_mac_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif); 1966 void il_mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 1967 struct ieee80211_bss_conf *bss_conf, u32 changes); 1968 void il_tx_cmd_protection(struct il_priv *il, struct ieee80211_tx_info *info, 1969 __le16 fc, __le32 *tx_flags); 1970 1971 irqreturn_t il_isr(int irq, void *data); 1972 1973 void il_set_bit(struct il_priv *p, u32 r, u32 m); 1974 void il_clear_bit(struct il_priv *p, u32 r, u32 m); 1975 bool _il_grab_nic_access(struct il_priv *il); 1976 int _il_poll_bit(struct il_priv *il, u32 addr, u32 bits, u32 mask, int timeout); 1977 int il_poll_bit(struct il_priv *il, u32 addr, u32 mask, int timeout); 1978 u32 il_rd_prph(struct il_priv *il, u32 reg); 1979 void il_wr_prph(struct il_priv *il, u32 addr, u32 val); 1980 u32 il_read_targ_mem(struct il_priv *il, u32 addr); 1981 void il_write_targ_mem(struct il_priv *il, u32 addr, u32 val); 1982 1983 static inline bool il_need_reclaim(struct il_priv *il, struct il_rx_pkt *pkt) 1984 { 1985 /* Reclaim a command buffer only if this packet is a response 1986 * to a (driver-originated) command. If the packet (e.g. Rx frame) 1987 * originated from uCode, there is no command buffer to reclaim. 1988 * Ucode should set SEQ_RX_FRAME bit if ucode-originated, but 1989 * apparently a few don't get set; catch them here. 1990 */ 1991 return !(pkt->hdr.sequence & SEQ_RX_FRAME) && 1992 pkt->hdr.cmd != N_STATS && pkt->hdr.cmd != C_TX && 1993 pkt->hdr.cmd != N_RX_PHY && pkt->hdr.cmd != N_RX && 1994 pkt->hdr.cmd != N_RX_MPDU && pkt->hdr.cmd != N_COMPRESSED_BA; 1995 } 1996 1997 static inline void 1998 _il_write8(struct il_priv *il, u32 ofs, u8 val) 1999 { 2000 writeb(val, il->hw_base + ofs); 2001 } 2002 #define il_write8(il, ofs, val) _il_write8(il, ofs, val) 2003 2004 static inline void 2005 _il_wr(struct il_priv *il, u32 ofs, u32 val) 2006 { 2007 writel(val, il->hw_base + ofs); 2008 } 2009 2010 static inline u32 2011 _il_rd(struct il_priv *il, u32 ofs) 2012 { 2013 return readl(il->hw_base + ofs); 2014 } 2015 2016 static inline void 2017 _il_clear_bit(struct il_priv *il, u32 reg, u32 mask) 2018 { 2019 _il_wr(il, reg, _il_rd(il, reg) & ~mask); 2020 } 2021 2022 static inline void 2023 _il_set_bit(struct il_priv *il, u32 reg, u32 mask) 2024 { 2025 _il_wr(il, reg, _il_rd(il, reg) | mask); 2026 } 2027 2028 static inline void 2029 _il_release_nic_access(struct il_priv *il) 2030 { 2031 _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); 2032 /* 2033 * In above we are reading CSR_GP_CNTRL register, what will flush any 2034 * previous writes, but still want write, which clear MAC_ACCESS_REQ 2035 * bit, be performed on PCI bus before any other writes scheduled on 2036 * different CPUs (after we drop reg_lock). 2037 */ 2038 mmiowb(); 2039 } 2040 2041 static inline u32 2042 il_rd(struct il_priv *il, u32 reg) 2043 { 2044 u32 value; 2045 unsigned long reg_flags; 2046 2047 spin_lock_irqsave(&il->reg_lock, reg_flags); 2048 _il_grab_nic_access(il); 2049 value = _il_rd(il, reg); 2050 _il_release_nic_access(il); 2051 spin_unlock_irqrestore(&il->reg_lock, reg_flags); 2052 return value; 2053 } 2054 2055 static inline void 2056 il_wr(struct il_priv *il, u32 reg, u32 value) 2057 { 2058 unsigned long reg_flags; 2059 2060 spin_lock_irqsave(&il->reg_lock, reg_flags); 2061 if (likely(_il_grab_nic_access(il))) { 2062 _il_wr(il, reg, value); 2063 _il_release_nic_access(il); 2064 } 2065 spin_unlock_irqrestore(&il->reg_lock, reg_flags); 2066 } 2067 2068 static inline u32 2069 _il_rd_prph(struct il_priv *il, u32 reg) 2070 { 2071 _il_wr(il, HBUS_TARG_PRPH_RADDR, reg | (3 << 24)); 2072 return _il_rd(il, HBUS_TARG_PRPH_RDAT); 2073 } 2074 2075 static inline void 2076 _il_wr_prph(struct il_priv *il, u32 addr, u32 val) 2077 { 2078 _il_wr(il, HBUS_TARG_PRPH_WADDR, ((addr & 0x0000FFFF) | (3 << 24))); 2079 _il_wr(il, HBUS_TARG_PRPH_WDAT, val); 2080 } 2081 2082 static inline void 2083 il_set_bits_prph(struct il_priv *il, u32 reg, u32 mask) 2084 { 2085 unsigned long reg_flags; 2086 2087 spin_lock_irqsave(&il->reg_lock, reg_flags); 2088 if (likely(_il_grab_nic_access(il))) { 2089 _il_wr_prph(il, reg, (_il_rd_prph(il, reg) | mask)); 2090 _il_release_nic_access(il); 2091 } 2092 spin_unlock_irqrestore(&il->reg_lock, reg_flags); 2093 } 2094 2095 static inline void 2096 il_set_bits_mask_prph(struct il_priv *il, u32 reg, u32 bits, u32 mask) 2097 { 2098 unsigned long reg_flags; 2099 2100 spin_lock_irqsave(&il->reg_lock, reg_flags); 2101 if (likely(_il_grab_nic_access(il))) { 2102 _il_wr_prph(il, reg, ((_il_rd_prph(il, reg) & mask) | bits)); 2103 _il_release_nic_access(il); 2104 } 2105 spin_unlock_irqrestore(&il->reg_lock, reg_flags); 2106 } 2107 2108 static inline void 2109 il_clear_bits_prph(struct il_priv *il, u32 reg, u32 mask) 2110 { 2111 unsigned long reg_flags; 2112 u32 val; 2113 2114 spin_lock_irqsave(&il->reg_lock, reg_flags); 2115 if (likely(_il_grab_nic_access(il))) { 2116 val = _il_rd_prph(il, reg); 2117 _il_wr_prph(il, reg, (val & ~mask)); 2118 _il_release_nic_access(il); 2119 } 2120 spin_unlock_irqrestore(&il->reg_lock, reg_flags); 2121 } 2122 2123 #define HW_KEY_DYNAMIC 0 2124 #define HW_KEY_DEFAULT 1 2125 2126 #define IL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */ 2127 #define IL_STA_UCODE_ACTIVE BIT(1) /* ucode entry is active */ 2128 #define IL_STA_UCODE_INPROGRESS BIT(2) /* ucode entry is in process of 2129 being activated */ 2130 #define IL_STA_LOCAL BIT(3) /* station state not directed by mac80211; 2131 (this is for the IBSS BSSID stations) */ 2132 #define IL_STA_BCAST BIT(4) /* this station is the special bcast station */ 2133 2134 void il_restore_stations(struct il_priv *il); 2135 void il_clear_ucode_stations(struct il_priv *il); 2136 void il_dealloc_bcast_stations(struct il_priv *il); 2137 int il_get_free_ucode_key_idx(struct il_priv *il); 2138 int il_send_add_sta(struct il_priv *il, struct il_addsta_cmd *sta, u8 flags); 2139 int il_add_station_common(struct il_priv *il, const u8 *addr, bool is_ap, 2140 struct ieee80211_sta *sta, u8 *sta_id_r); 2141 int il_remove_station(struct il_priv *il, const u8 sta_id, const u8 * addr); 2142 int il_mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 2143 struct ieee80211_sta *sta); 2144 2145 u8 il_prep_station(struct il_priv *il, const u8 *addr, bool is_ap, 2146 struct ieee80211_sta *sta); 2147 2148 int il_send_lq_cmd(struct il_priv *il, struct il_link_quality_cmd *lq, 2149 u8 flags, bool init); 2150 2151 /** 2152 * il_clear_driver_stations - clear knowledge of all stations from driver 2153 * @il: iwl il struct 2154 * 2155 * This is called during il_down() to make sure that in the case 2156 * we're coming there from a hardware restart mac80211 will be 2157 * able to reconfigure stations -- if we're getting there in the 2158 * normal down flow then the stations will already be cleared. 2159 */ 2160 static inline void 2161 il_clear_driver_stations(struct il_priv *il) 2162 { 2163 unsigned long flags; 2164 2165 spin_lock_irqsave(&il->sta_lock, flags); 2166 memset(il->stations, 0, sizeof(il->stations)); 2167 il->num_stations = 0; 2168 il->ucode_key_table = 0; 2169 spin_unlock_irqrestore(&il->sta_lock, flags); 2170 } 2171 2172 static inline int 2173 il_sta_id(struct ieee80211_sta *sta) 2174 { 2175 if (WARN_ON(!sta)) 2176 return IL_INVALID_STATION; 2177 2178 return ((struct il_station_priv_common *)sta->drv_priv)->sta_id; 2179 } 2180 2181 /** 2182 * il_sta_id_or_broadcast - return sta_id or broadcast sta 2183 * @il: iwl il 2184 * @context: the current context 2185 * @sta: mac80211 station 2186 * 2187 * In certain circumstances mac80211 passes a station pointer 2188 * that may be %NULL, for example during TX or key setup. In 2189 * that case, we need to use the broadcast station, so this 2190 * inline wraps that pattern. 2191 */ 2192 static inline int 2193 il_sta_id_or_broadcast(struct il_priv *il, struct ieee80211_sta *sta) 2194 { 2195 int sta_id; 2196 2197 if (!sta) 2198 return il->hw_params.bcast_id; 2199 2200 sta_id = il_sta_id(sta); 2201 2202 /* 2203 * mac80211 should not be passing a partially 2204 * initialised station! 2205 */ 2206 WARN_ON(sta_id == IL_INVALID_STATION); 2207 2208 return sta_id; 2209 } 2210 2211 /** 2212 * il_queue_inc_wrap - increment queue idx, wrap back to beginning 2213 * @idx -- current idx 2214 * @n_bd -- total number of entries in queue (must be power of 2) 2215 */ 2216 static inline int 2217 il_queue_inc_wrap(int idx, int n_bd) 2218 { 2219 return ++idx & (n_bd - 1); 2220 } 2221 2222 /** 2223 * il_queue_dec_wrap - decrement queue idx, wrap back to end 2224 * @idx -- current idx 2225 * @n_bd -- total number of entries in queue (must be power of 2) 2226 */ 2227 static inline int 2228 il_queue_dec_wrap(int idx, int n_bd) 2229 { 2230 return --idx & (n_bd - 1); 2231 } 2232 2233 /* TODO: Move fw_desc functions to iwl-pci.ko */ 2234 static inline void 2235 il_free_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc) 2236 { 2237 if (desc->v_addr) 2238 dma_free_coherent(&pci_dev->dev, desc->len, desc->v_addr, 2239 desc->p_addr); 2240 desc->v_addr = NULL; 2241 desc->len = 0; 2242 } 2243 2244 static inline int 2245 il_alloc_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc) 2246 { 2247 if (!desc->len) { 2248 desc->v_addr = NULL; 2249 return -EINVAL; 2250 } 2251 2252 desc->v_addr = dma_alloc_coherent(&pci_dev->dev, desc->len, 2253 &desc->p_addr, GFP_KERNEL); 2254 return (desc->v_addr != NULL) ? 0 : -ENOMEM; 2255 } 2256 2257 /* 2258 * we have 8 bits used like this: 2259 * 2260 * 7 6 5 4 3 2 1 0 2261 * | | | | | | | | 2262 * | | | | | | +-+-------- AC queue (0-3) 2263 * | | | | | | 2264 * | +-+-+-+-+------------ HW queue ID 2265 * | 2266 * +---------------------- unused 2267 */ 2268 static inline void 2269 il_set_swq_id(struct il_tx_queue *txq, u8 ac, u8 hwq) 2270 { 2271 BUG_ON(ac > 3); /* only have 2 bits */ 2272 BUG_ON(hwq > 31); /* only use 5 bits */ 2273 2274 txq->swq_id = (hwq << 2) | ac; 2275 } 2276 2277 static inline void 2278 _il_wake_queue(struct il_priv *il, u8 ac) 2279 { 2280 if (atomic_dec_return(&il->queue_stop_count[ac]) <= 0) 2281 ieee80211_wake_queue(il->hw, ac); 2282 } 2283 2284 static inline void 2285 _il_stop_queue(struct il_priv *il, u8 ac) 2286 { 2287 if (atomic_inc_return(&il->queue_stop_count[ac]) > 0) 2288 ieee80211_stop_queue(il->hw, ac); 2289 } 2290 static inline void 2291 il_wake_queue(struct il_priv *il, struct il_tx_queue *txq) 2292 { 2293 u8 queue = txq->swq_id; 2294 u8 ac = queue & 3; 2295 u8 hwq = (queue >> 2) & 0x1f; 2296 2297 if (test_and_clear_bit(hwq, il->queue_stopped)) 2298 _il_wake_queue(il, ac); 2299 } 2300 2301 static inline void 2302 il_stop_queue(struct il_priv *il, struct il_tx_queue *txq) 2303 { 2304 u8 queue = txq->swq_id; 2305 u8 ac = queue & 3; 2306 u8 hwq = (queue >> 2) & 0x1f; 2307 2308 if (!test_and_set_bit(hwq, il->queue_stopped)) 2309 _il_stop_queue(il, ac); 2310 } 2311 2312 static inline void 2313 il_wake_queues_by_reason(struct il_priv *il, int reason) 2314 { 2315 u8 ac; 2316 2317 if (test_and_clear_bit(reason, &il->stop_reason)) 2318 for (ac = 0; ac < 4; ac++) 2319 _il_wake_queue(il, ac); 2320 } 2321 2322 static inline void 2323 il_stop_queues_by_reason(struct il_priv *il, int reason) 2324 { 2325 u8 ac; 2326 2327 if (!test_and_set_bit(reason, &il->stop_reason)) 2328 for (ac = 0; ac < 4; ac++) 2329 _il_stop_queue(il, ac); 2330 } 2331 2332 #ifdef ieee80211_stop_queue 2333 #undef ieee80211_stop_queue 2334 #endif 2335 2336 #define ieee80211_stop_queue DO_NOT_USE_ieee80211_stop_queue 2337 2338 #ifdef ieee80211_wake_queue 2339 #undef ieee80211_wake_queue 2340 #endif 2341 2342 #define ieee80211_wake_queue DO_NOT_USE_ieee80211_wake_queue 2343 2344 static inline void 2345 il_disable_interrupts(struct il_priv *il) 2346 { 2347 clear_bit(S_INT_ENABLED, &il->status); 2348 2349 /* disable interrupts from uCode/NIC to host */ 2350 _il_wr(il, CSR_INT_MASK, 0x00000000); 2351 2352 /* acknowledge/clear/reset any interrupts still pending 2353 * from uCode or flow handler (Rx/Tx DMA) */ 2354 _il_wr(il, CSR_INT, 0xffffffff); 2355 _il_wr(il, CSR_FH_INT_STATUS, 0xffffffff); 2356 } 2357 2358 static inline void 2359 il_enable_rfkill_int(struct il_priv *il) 2360 { 2361 _il_wr(il, CSR_INT_MASK, CSR_INT_BIT_RF_KILL); 2362 } 2363 2364 static inline void 2365 il_enable_interrupts(struct il_priv *il) 2366 { 2367 set_bit(S_INT_ENABLED, &il->status); 2368 _il_wr(il, CSR_INT_MASK, il->inta_mask); 2369 } 2370 2371 /** 2372 * il_beacon_time_mask_low - mask of lower 32 bit of beacon time 2373 * @il -- pointer to il_priv data structure 2374 * @tsf_bits -- number of bits need to shift for masking) 2375 */ 2376 static inline u32 2377 il_beacon_time_mask_low(struct il_priv *il, u16 tsf_bits) 2378 { 2379 return (1 << tsf_bits) - 1; 2380 } 2381 2382 /** 2383 * il_beacon_time_mask_high - mask of higher 32 bit of beacon time 2384 * @il -- pointer to il_priv data structure 2385 * @tsf_bits -- number of bits need to shift for masking) 2386 */ 2387 static inline u32 2388 il_beacon_time_mask_high(struct il_priv *il, u16 tsf_bits) 2389 { 2390 return ((1 << (32 - tsf_bits)) - 1) << tsf_bits; 2391 } 2392 2393 /** 2394 * struct il_rb_status - reseve buffer status host memory mapped FH registers 2395 * 2396 * @closed_rb_num [0:11] - Indicates the idx of the RB which was closed 2397 * @closed_fr_num [0:11] - Indicates the idx of the RX Frame which was closed 2398 * @finished_rb_num [0:11] - Indicates the idx of the current RB 2399 * in which the last frame was written to 2400 * @finished_fr_num [0:11] - Indicates the idx of the RX Frame 2401 * which was transferred 2402 */ 2403 struct il_rb_status { 2404 __le16 closed_rb_num; 2405 __le16 closed_fr_num; 2406 __le16 finished_rb_num; 2407 __le16 finished_fr_nam; 2408 __le32 __unused; /* 3945 only */ 2409 } __packed; 2410 2411 #define TFD_QUEUE_SIZE_MAX 256 2412 #define TFD_QUEUE_SIZE_BC_DUP 64 2413 #define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP) 2414 #define IL_TX_DMA_MASK DMA_BIT_MASK(36) 2415 #define IL_NUM_OF_TBS 20 2416 2417 static inline u8 2418 il_get_dma_hi_addr(dma_addr_t addr) 2419 { 2420 return (sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0) & 0xF; 2421 } 2422 2423 /** 2424 * struct il_tfd_tb transmit buffer descriptor within transmit frame descriptor 2425 * 2426 * This structure contains dma address and length of transmission address 2427 * 2428 * @lo: low [31:0] portion of the dma address of TX buffer every even is 2429 * unaligned on 16 bit boundary 2430 * @hi_n_len: 0-3 [35:32] portion of dma 2431 * 4-15 length of the tx buffer 2432 */ 2433 struct il_tfd_tb { 2434 __le32 lo; 2435 __le16 hi_n_len; 2436 } __packed; 2437 2438 /** 2439 * struct il_tfd 2440 * 2441 * Transmit Frame Descriptor (TFD) 2442 * 2443 * @ __reserved1[3] reserved 2444 * @ num_tbs 0-4 number of active tbs 2445 * 5 reserved 2446 * 6-7 padding (not used) 2447 * @ tbs[20] transmit frame buffer descriptors 2448 * @ __pad padding 2449 * 2450 * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. 2451 * Both driver and device share these circular buffers, each of which must be 2452 * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes 2453 * 2454 * Driver must indicate the physical address of the base of each 2455 * circular buffer via the FH49_MEM_CBBC_QUEUE registers. 2456 * 2457 * Each TFD contains pointer/size information for up to 20 data buffers 2458 * in host DRAM. These buffers collectively contain the (one) frame described 2459 * by the TFD. Each buffer must be a single contiguous block of memory within 2460 * itself, but buffers may be scattered in host DRAM. Each buffer has max size 2461 * of (4K - 4). The concatenates all of a TFD's buffers into a single 2462 * Tx frame, up to 8 KBytes in size. 2463 * 2464 * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. 2465 */ 2466 struct il_tfd { 2467 u8 __reserved1[3]; 2468 u8 num_tbs; 2469 struct il_tfd_tb tbs[IL_NUM_OF_TBS]; 2470 __le32 __pad; 2471 } __packed; 2472 /* PCI registers */ 2473 #define PCI_CFG_RETRY_TIMEOUT 0x041 2474 2475 struct il_rate_info { 2476 u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */ 2477 u8 plcp_siso; /* uCode API: RATE_SISO_6M_PLCP, etc. */ 2478 u8 plcp_mimo2; /* uCode API: RATE_MIMO2_6M_PLCP, etc. */ 2479 u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */ 2480 u8 prev_ieee; /* previous rate in IEEE speeds */ 2481 u8 next_ieee; /* next rate in IEEE speeds */ 2482 u8 prev_rs; /* previous rate used in rs algo */ 2483 u8 next_rs; /* next rate used in rs algo */ 2484 u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ 2485 u8 next_rs_tgg; /* next rate used in TGG rs algo */ 2486 }; 2487 2488 struct il3945_rate_info { 2489 u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */ 2490 u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */ 2491 u8 prev_ieee; /* previous rate in IEEE speeds */ 2492 u8 next_ieee; /* next rate in IEEE speeds */ 2493 u8 prev_rs; /* previous rate used in rs algo */ 2494 u8 next_rs; /* next rate used in rs algo */ 2495 u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ 2496 u8 next_rs_tgg; /* next rate used in TGG rs algo */ 2497 u8 table_rs_idx; /* idx in rate scale table cmd */ 2498 u8 prev_table_rs; /* prev in rate table cmd */ 2499 }; 2500 2501 /* 2502 * These serve as idxes into 2503 * struct il_rate_info il_rates[RATE_COUNT]; 2504 */ 2505 enum { 2506 RATE_1M_IDX = 0, 2507 RATE_2M_IDX, 2508 RATE_5M_IDX, 2509 RATE_11M_IDX, 2510 RATE_6M_IDX, 2511 RATE_9M_IDX, 2512 RATE_12M_IDX, 2513 RATE_18M_IDX, 2514 RATE_24M_IDX, 2515 RATE_36M_IDX, 2516 RATE_48M_IDX, 2517 RATE_54M_IDX, 2518 RATE_60M_IDX, 2519 RATE_COUNT, 2520 RATE_COUNT_LEGACY = RATE_COUNT - 1, /* Excluding 60M */ 2521 RATE_COUNT_3945 = RATE_COUNT - 1, 2522 RATE_INVM_IDX = RATE_COUNT, 2523 RATE_INVALID = RATE_COUNT, 2524 }; 2525 2526 enum { 2527 RATE_6M_IDX_TBL = 0, 2528 RATE_9M_IDX_TBL, 2529 RATE_12M_IDX_TBL, 2530 RATE_18M_IDX_TBL, 2531 RATE_24M_IDX_TBL, 2532 RATE_36M_IDX_TBL, 2533 RATE_48M_IDX_TBL, 2534 RATE_54M_IDX_TBL, 2535 RATE_1M_IDX_TBL, 2536 RATE_2M_IDX_TBL, 2537 RATE_5M_IDX_TBL, 2538 RATE_11M_IDX_TBL, 2539 RATE_INVM_IDX_TBL = RATE_INVM_IDX - 1, 2540 }; 2541 2542 enum { 2543 IL_FIRST_OFDM_RATE = RATE_6M_IDX, 2544 IL39_LAST_OFDM_RATE = RATE_54M_IDX, 2545 IL_LAST_OFDM_RATE = RATE_60M_IDX, 2546 IL_FIRST_CCK_RATE = RATE_1M_IDX, 2547 IL_LAST_CCK_RATE = RATE_11M_IDX, 2548 }; 2549 2550 /* #define vs. enum to keep from defaulting to 'large integer' */ 2551 #define RATE_6M_MASK (1 << RATE_6M_IDX) 2552 #define RATE_9M_MASK (1 << RATE_9M_IDX) 2553 #define RATE_12M_MASK (1 << RATE_12M_IDX) 2554 #define RATE_18M_MASK (1 << RATE_18M_IDX) 2555 #define RATE_24M_MASK (1 << RATE_24M_IDX) 2556 #define RATE_36M_MASK (1 << RATE_36M_IDX) 2557 #define RATE_48M_MASK (1 << RATE_48M_IDX) 2558 #define RATE_54M_MASK (1 << RATE_54M_IDX) 2559 #define RATE_60M_MASK (1 << RATE_60M_IDX) 2560 #define RATE_1M_MASK (1 << RATE_1M_IDX) 2561 #define RATE_2M_MASK (1 << RATE_2M_IDX) 2562 #define RATE_5M_MASK (1 << RATE_5M_IDX) 2563 #define RATE_11M_MASK (1 << RATE_11M_IDX) 2564 2565 /* uCode API values for legacy bit rates, both OFDM and CCK */ 2566 enum { 2567 RATE_6M_PLCP = 13, 2568 RATE_9M_PLCP = 15, 2569 RATE_12M_PLCP = 5, 2570 RATE_18M_PLCP = 7, 2571 RATE_24M_PLCP = 9, 2572 RATE_36M_PLCP = 11, 2573 RATE_48M_PLCP = 1, 2574 RATE_54M_PLCP = 3, 2575 RATE_60M_PLCP = 3, /*FIXME:RS:should be removed */ 2576 RATE_1M_PLCP = 10, 2577 RATE_2M_PLCP = 20, 2578 RATE_5M_PLCP = 55, 2579 RATE_11M_PLCP = 110, 2580 /*FIXME:RS:add RATE_LEGACY_INVM_PLCP = 0, */ 2581 }; 2582 2583 /* uCode API values for OFDM high-throughput (HT) bit rates */ 2584 enum { 2585 RATE_SISO_6M_PLCP = 0, 2586 RATE_SISO_12M_PLCP = 1, 2587 RATE_SISO_18M_PLCP = 2, 2588 RATE_SISO_24M_PLCP = 3, 2589 RATE_SISO_36M_PLCP = 4, 2590 RATE_SISO_48M_PLCP = 5, 2591 RATE_SISO_54M_PLCP = 6, 2592 RATE_SISO_60M_PLCP = 7, 2593 RATE_MIMO2_6M_PLCP = 0x8, 2594 RATE_MIMO2_12M_PLCP = 0x9, 2595 RATE_MIMO2_18M_PLCP = 0xa, 2596 RATE_MIMO2_24M_PLCP = 0xb, 2597 RATE_MIMO2_36M_PLCP = 0xc, 2598 RATE_MIMO2_48M_PLCP = 0xd, 2599 RATE_MIMO2_54M_PLCP = 0xe, 2600 RATE_MIMO2_60M_PLCP = 0xf, 2601 RATE_SISO_INVM_PLCP, 2602 RATE_MIMO2_INVM_PLCP = RATE_SISO_INVM_PLCP, 2603 }; 2604 2605 /* MAC header values for bit rates */ 2606 enum { 2607 RATE_6M_IEEE = 12, 2608 RATE_9M_IEEE = 18, 2609 RATE_12M_IEEE = 24, 2610 RATE_18M_IEEE = 36, 2611 RATE_24M_IEEE = 48, 2612 RATE_36M_IEEE = 72, 2613 RATE_48M_IEEE = 96, 2614 RATE_54M_IEEE = 108, 2615 RATE_60M_IEEE = 120, 2616 RATE_1M_IEEE = 2, 2617 RATE_2M_IEEE = 4, 2618 RATE_5M_IEEE = 11, 2619 RATE_11M_IEEE = 22, 2620 }; 2621 2622 #define IL_CCK_BASIC_RATES_MASK \ 2623 (RATE_1M_MASK | \ 2624 RATE_2M_MASK) 2625 2626 #define IL_CCK_RATES_MASK \ 2627 (IL_CCK_BASIC_RATES_MASK | \ 2628 RATE_5M_MASK | \ 2629 RATE_11M_MASK) 2630 2631 #define IL_OFDM_BASIC_RATES_MASK \ 2632 (RATE_6M_MASK | \ 2633 RATE_12M_MASK | \ 2634 RATE_24M_MASK) 2635 2636 #define IL_OFDM_RATES_MASK \ 2637 (IL_OFDM_BASIC_RATES_MASK | \ 2638 RATE_9M_MASK | \ 2639 RATE_18M_MASK | \ 2640 RATE_36M_MASK | \ 2641 RATE_48M_MASK | \ 2642 RATE_54M_MASK) 2643 2644 #define IL_BASIC_RATES_MASK \ 2645 (IL_OFDM_BASIC_RATES_MASK | \ 2646 IL_CCK_BASIC_RATES_MASK) 2647 2648 #define RATES_MASK ((1 << RATE_COUNT) - 1) 2649 #define RATES_MASK_3945 ((1 << RATE_COUNT_3945) - 1) 2650 2651 #define IL_INVALID_VALUE -1 2652 2653 #define IL_MIN_RSSI_VAL -100 2654 #define IL_MAX_RSSI_VAL 0 2655 2656 /* These values specify how many Tx frame attempts before 2657 * searching for a new modulation mode */ 2658 #define IL_LEGACY_FAILURE_LIMIT 160 2659 #define IL_LEGACY_SUCCESS_LIMIT 480 2660 #define IL_LEGACY_TBL_COUNT 160 2661 2662 #define IL_NONE_LEGACY_FAILURE_LIMIT 400 2663 #define IL_NONE_LEGACY_SUCCESS_LIMIT 4500 2664 #define IL_NONE_LEGACY_TBL_COUNT 1500 2665 2666 /* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ 2667 #define IL_RS_GOOD_RATIO 12800 /* 100% */ 2668 #define RATE_SCALE_SWITCH 10880 /* 85% */ 2669 #define RATE_HIGH_TH 10880 /* 85% */ 2670 #define RATE_INCREASE_TH 6400 /* 50% */ 2671 #define RATE_DECREASE_TH 1920 /* 15% */ 2672 2673 /* possible actions when in legacy mode */ 2674 #define IL_LEGACY_SWITCH_ANTENNA1 0 2675 #define IL_LEGACY_SWITCH_ANTENNA2 1 2676 #define IL_LEGACY_SWITCH_SISO 2 2677 #define IL_LEGACY_SWITCH_MIMO2_AB 3 2678 #define IL_LEGACY_SWITCH_MIMO2_AC 4 2679 #define IL_LEGACY_SWITCH_MIMO2_BC 5 2680 2681 /* possible actions when in siso mode */ 2682 #define IL_SISO_SWITCH_ANTENNA1 0 2683 #define IL_SISO_SWITCH_ANTENNA2 1 2684 #define IL_SISO_SWITCH_MIMO2_AB 2 2685 #define IL_SISO_SWITCH_MIMO2_AC 3 2686 #define IL_SISO_SWITCH_MIMO2_BC 4 2687 #define IL_SISO_SWITCH_GI 5 2688 2689 /* possible actions when in mimo mode */ 2690 #define IL_MIMO2_SWITCH_ANTENNA1 0 2691 #define IL_MIMO2_SWITCH_ANTENNA2 1 2692 #define IL_MIMO2_SWITCH_SISO_A 2 2693 #define IL_MIMO2_SWITCH_SISO_B 3 2694 #define IL_MIMO2_SWITCH_SISO_C 4 2695 #define IL_MIMO2_SWITCH_GI 5 2696 2697 #define IL_MAX_SEARCH IL_MIMO2_SWITCH_GI 2698 2699 #define IL_ACTION_LIMIT 3 /* # possible actions */ 2700 2701 #define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ 2702 2703 /* load per tid defines for A-MPDU activation */ 2704 #define IL_AGG_TPT_THREHOLD 0 2705 #define IL_AGG_LOAD_THRESHOLD 10 2706 #define IL_AGG_ALL_TID 0xff 2707 #define TID_QUEUE_CELL_SPACING 50 /*mS */ 2708 #define TID_QUEUE_MAX_SIZE 20 2709 #define TID_ROUND_VALUE 5 /* mS */ 2710 #define TID_MAX_LOAD_COUNT 8 2711 2712 #define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) 2713 #define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) 2714 2715 extern const struct il_rate_info il_rates[RATE_COUNT]; 2716 2717 enum il_table_type { 2718 LQ_NONE, 2719 LQ_G, /* legacy types */ 2720 LQ_A, 2721 LQ_SISO, /* high-throughput types */ 2722 LQ_MIMO2, 2723 LQ_MAX, 2724 }; 2725 2726 #define is_legacy(tbl) ((tbl) == LQ_G || (tbl) == LQ_A) 2727 #define is_siso(tbl) ((tbl) == LQ_SISO) 2728 #define is_mimo2(tbl) ((tbl) == LQ_MIMO2) 2729 #define is_mimo(tbl) (is_mimo2(tbl)) 2730 #define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) 2731 #define is_a_band(tbl) ((tbl) == LQ_A) 2732 #define is_g_and(tbl) ((tbl) == LQ_G) 2733 2734 #define ANT_NONE 0x0 2735 #define ANT_A BIT(0) 2736 #define ANT_B BIT(1) 2737 #define ANT_AB (ANT_A | ANT_B) 2738 #define ANT_C BIT(2) 2739 #define ANT_AC (ANT_A | ANT_C) 2740 #define ANT_BC (ANT_B | ANT_C) 2741 #define ANT_ABC (ANT_AB | ANT_C) 2742 2743 #define IL_MAX_MCS_DISPLAY_SIZE 12 2744 2745 struct il_rate_mcs_info { 2746 char mbps[IL_MAX_MCS_DISPLAY_SIZE]; 2747 char mcs[IL_MAX_MCS_DISPLAY_SIZE]; 2748 }; 2749 2750 /** 2751 * struct il_rate_scale_data -- tx success history for one rate 2752 */ 2753 struct il_rate_scale_data { 2754 u64 data; /* bitmap of successful frames */ 2755 s32 success_counter; /* number of frames successful */ 2756 s32 success_ratio; /* per-cent * 128 */ 2757 s32 counter; /* number of frames attempted */ 2758 s32 average_tpt; /* success ratio * expected throughput */ 2759 unsigned long stamp; 2760 }; 2761 2762 /** 2763 * struct il_scale_tbl_info -- tx params and success history for all rates 2764 * 2765 * There are two of these in struct il_lq_sta, 2766 * one for "active", and one for "search". 2767 */ 2768 struct il_scale_tbl_info { 2769 enum il_table_type lq_type; 2770 u8 ant_type; 2771 u8 is_SGI; /* 1 = short guard interval */ 2772 u8 is_ht40; /* 1 = 40 MHz channel width */ 2773 u8 is_dup; /* 1 = duplicated data streams */ 2774 u8 action; /* change modulation; IL_[LEGACY/SISO/MIMO]_SWITCH_* */ 2775 u8 max_search; /* maximun number of tables we can search */ 2776 s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ 2777 u32 current_rate; /* rate_n_flags, uCode API format */ 2778 struct il_rate_scale_data win[RATE_COUNT]; /* rate histories */ 2779 }; 2780 2781 struct il_traffic_load { 2782 unsigned long time_stamp; /* age of the oldest stats */ 2783 u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time 2784 * slice */ 2785 u32 total; /* total num of packets during the 2786 * last TID_MAX_TIME_DIFF */ 2787 u8 queue_count; /* number of queues that has 2788 * been used since the last cleanup */ 2789 u8 head; /* start of the circular buffer */ 2790 }; 2791 2792 /** 2793 * struct il_lq_sta -- driver's rate scaling ilate structure 2794 * 2795 * Pointer to this gets passed back and forth between driver and mac80211. 2796 */ 2797 struct il_lq_sta { 2798 u8 active_tbl; /* idx of active table, range 0-1 */ 2799 u8 enable_counter; /* indicates HT mode */ 2800 u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ 2801 u8 search_better_tbl; /* 1: currently trying alternate mode */ 2802 s32 last_tpt; 2803 2804 /* The following determine when to search for a new mode */ 2805 u32 table_count_limit; 2806 u32 max_failure_limit; /* # failed frames before new search */ 2807 u32 max_success_limit; /* # successful frames before new search */ 2808 u32 table_count; 2809 u32 total_failed; /* total failed frames, any/all rates */ 2810 u32 total_success; /* total successful frames, any/all rates */ 2811 u64 flush_timer; /* time staying in mode before new search */ 2812 2813 u8 action_counter; /* # mode-switch actions tried */ 2814 u8 is_green; 2815 u8 is_dup; 2816 enum nl80211_band band; 2817 2818 /* The following are bitmaps of rates; RATE_6M_MASK, etc. */ 2819 u32 supp_rates; 2820 u16 active_legacy_rate; 2821 u16 active_siso_rate; 2822 u16 active_mimo2_rate; 2823 s8 max_rate_idx; /* Max rate set by user */ 2824 u8 missed_rate_counter; 2825 2826 struct il_link_quality_cmd lq; 2827 struct il_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ 2828 struct il_traffic_load load[TID_MAX_LOAD_COUNT]; 2829 u8 tx_agg_tid_en; 2830 #ifdef CONFIG_MAC80211_DEBUGFS 2831 struct dentry *rs_sta_dbgfs_scale_table_file; 2832 struct dentry *rs_sta_dbgfs_stats_table_file; 2833 struct dentry *rs_sta_dbgfs_rate_scale_data_file; 2834 struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; 2835 u32 dbg_fixed_rate; 2836 #endif 2837 struct il_priv *drv; 2838 2839 /* used to be in sta_info */ 2840 int last_txrate_idx; 2841 /* last tx rate_n_flags */ 2842 u32 last_rate_n_flags; 2843 /* packets destined for this STA are aggregated */ 2844 u8 is_agg; 2845 }; 2846 2847 /* 2848 * il_station_priv: Driver's ilate station information 2849 * 2850 * When mac80211 creates a station it reserves some space (hw->sta_data_size) 2851 * in the structure for use by driver. This structure is places in that 2852 * space. 2853 * 2854 * The common struct MUST be first because it is shared between 2855 * 3945 and 4965! 2856 */ 2857 struct il_station_priv { 2858 struct il_station_priv_common common; 2859 struct il_lq_sta lq_sta; 2860 atomic_t pending_frames; 2861 bool client; 2862 bool asleep; 2863 }; 2864 2865 static inline u8 2866 il4965_num_of_ant(u8 m) 2867 { 2868 return !!(m & ANT_A) + !!(m & ANT_B) + !!(m & ANT_C); 2869 } 2870 2871 static inline u8 2872 il4965_first_antenna(u8 mask) 2873 { 2874 if (mask & ANT_A) 2875 return ANT_A; 2876 if (mask & ANT_B) 2877 return ANT_B; 2878 return ANT_C; 2879 } 2880 2881 /** 2882 * il3945_rate_scale_init - Initialize the rate scale table based on assoc info 2883 * 2884 * The specific throughput table used is based on the type of network 2885 * the associated with, including A, B, G, and G w/ TGG protection 2886 */ 2887 void il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id); 2888 2889 /* Initialize station's rate scaling information after adding station */ 2890 void il4965_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, 2891 u8 sta_id); 2892 void il3945_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, 2893 u8 sta_id); 2894 2895 /** 2896 * il_rate_control_register - Register the rate control algorithm callbacks 2897 * 2898 * Since the rate control algorithm is hardware specific, there is no need 2899 * or reason to place it as a stand alone module. The driver can call 2900 * il_rate_control_register in order to register the rate control callbacks 2901 * with the mac80211 subsystem. This should be performed prior to calling 2902 * ieee80211_register_hw 2903 * 2904 */ 2905 int il4965_rate_control_register(void); 2906 int il3945_rate_control_register(void); 2907 2908 /** 2909 * il_rate_control_unregister - Unregister the rate control callbacks 2910 * 2911 * This should be called after calling ieee80211_unregister_hw, but before 2912 * the driver is unloaded. 2913 */ 2914 void il4965_rate_control_unregister(void); 2915 void il3945_rate_control_unregister(void); 2916 2917 int il_power_update_mode(struct il_priv *il, bool force); 2918 void il_power_initialize(struct il_priv *il); 2919 2920 extern u32 il_debug_level; 2921 2922 #ifdef CONFIG_IWLEGACY_DEBUG 2923 /* 2924 * il_get_debug_level: Return active debug level for device 2925 * 2926 * Using sysfs it is possible to set per device debug level. This debug 2927 * level will be used if set, otherwise the global debug level which can be 2928 * set via module parameter is used. 2929 */ 2930 static inline u32 2931 il_get_debug_level(struct il_priv *il) 2932 { 2933 if (il->debug_level) 2934 return il->debug_level; 2935 else 2936 return il_debug_level; 2937 } 2938 #else 2939 static inline u32 2940 il_get_debug_level(struct il_priv *il) 2941 { 2942 return il_debug_level; 2943 } 2944 #endif 2945 2946 #define il_print_hex_error(il, p, len) \ 2947 do { \ 2948 print_hex_dump(KERN_ERR, "iwl data: ", \ 2949 DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \ 2950 } while (0) 2951 2952 #ifdef CONFIG_IWLEGACY_DEBUG 2953 #define IL_DBG(level, fmt, args...) \ 2954 do { \ 2955 if (il_get_debug_level(il) & level) \ 2956 dev_err(&il->hw->wiphy->dev, "%c %s " fmt, \ 2957 in_interrupt() ? 'I' : 'U', __func__ , ##args); \ 2958 } while (0) 2959 2960 #define il_print_hex_dump(il, level, p, len) \ 2961 do { \ 2962 if (il_get_debug_level(il) & level) \ 2963 print_hex_dump(KERN_DEBUG, "iwl data: ", \ 2964 DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \ 2965 } while (0) 2966 2967 #else 2968 #define IL_DBG(level, fmt, args...) 2969 static inline void 2970 il_print_hex_dump(struct il_priv *il, int level, const void *p, u32 len) 2971 { 2972 } 2973 #endif /* CONFIG_IWLEGACY_DEBUG */ 2974 2975 #ifdef CONFIG_IWLEGACY_DEBUGFS 2976 int il_dbgfs_register(struct il_priv *il, const char *name); 2977 void il_dbgfs_unregister(struct il_priv *il); 2978 #else 2979 static inline int 2980 il_dbgfs_register(struct il_priv *il, const char *name) 2981 { 2982 return 0; 2983 } 2984 2985 static inline void 2986 il_dbgfs_unregister(struct il_priv *il) 2987 { 2988 } 2989 #endif /* CONFIG_IWLEGACY_DEBUGFS */ 2990 2991 /* 2992 * To use the debug system: 2993 * 2994 * If you are defining a new debug classification, simply add it to the #define 2995 * list here in the form of 2996 * 2997 * #define IL_DL_xxxx VALUE 2998 * 2999 * where xxxx should be the name of the classification (for example, WEP). 3000 * 3001 * You then need to either add a IL_xxxx_DEBUG() macro definition for your 3002 * classification, or use IL_DBG(IL_DL_xxxx, ...) whenever you want 3003 * to send output to that classification. 3004 * 3005 * The active debug levels can be accessed via files 3006 * 3007 * /sys/module/iwl4965/parameters/debug 3008 * /sys/module/iwl3945/parameters/debug 3009 * /sys/class/net/wlan0/device/debug_level 3010 * 3011 * when CONFIG_IWLEGACY_DEBUG=y. 3012 */ 3013 3014 /* 0x0000000F - 0x00000001 */ 3015 #define IL_DL_INFO (1 << 0) 3016 #define IL_DL_MAC80211 (1 << 1) 3017 #define IL_DL_HCMD (1 << 2) 3018 #define IL_DL_STATE (1 << 3) 3019 /* 0x000000F0 - 0x00000010 */ 3020 #define IL_DL_MACDUMP (1 << 4) 3021 #define IL_DL_HCMD_DUMP (1 << 5) 3022 #define IL_DL_EEPROM (1 << 6) 3023 #define IL_DL_RADIO (1 << 7) 3024 /* 0x00000F00 - 0x00000100 */ 3025 #define IL_DL_POWER (1 << 8) 3026 #define IL_DL_TEMP (1 << 9) 3027 #define IL_DL_NOTIF (1 << 10) 3028 #define IL_DL_SCAN (1 << 11) 3029 /* 0x0000F000 - 0x00001000 */ 3030 #define IL_DL_ASSOC (1 << 12) 3031 #define IL_DL_DROP (1 << 13) 3032 #define IL_DL_TXPOWER (1 << 14) 3033 #define IL_DL_AP (1 << 15) 3034 /* 0x000F0000 - 0x00010000 */ 3035 #define IL_DL_FW (1 << 16) 3036 #define IL_DL_RF_KILL (1 << 17) 3037 #define IL_DL_FW_ERRORS (1 << 18) 3038 #define IL_DL_LED (1 << 19) 3039 /* 0x00F00000 - 0x00100000 */ 3040 #define IL_DL_RATE (1 << 20) 3041 #define IL_DL_CALIB (1 << 21) 3042 #define IL_DL_WEP (1 << 22) 3043 #define IL_DL_TX (1 << 23) 3044 /* 0x0F000000 - 0x01000000 */ 3045 #define IL_DL_RX (1 << 24) 3046 #define IL_DL_ISR (1 << 25) 3047 #define IL_DL_HT (1 << 26) 3048 /* 0xF0000000 - 0x10000000 */ 3049 #define IL_DL_11H (1 << 28) 3050 #define IL_DL_STATS (1 << 29) 3051 #define IL_DL_TX_REPLY (1 << 30) 3052 #define IL_DL_QOS (1 << 31) 3053 3054 #define D_INFO(f, a...) IL_DBG(IL_DL_INFO, f, ## a) 3055 #define D_MAC80211(f, a...) IL_DBG(IL_DL_MAC80211, f, ## a) 3056 #define D_MACDUMP(f, a...) IL_DBG(IL_DL_MACDUMP, f, ## a) 3057 #define D_TEMP(f, a...) IL_DBG(IL_DL_TEMP, f, ## a) 3058 #define D_SCAN(f, a...) IL_DBG(IL_DL_SCAN, f, ## a) 3059 #define D_RX(f, a...) IL_DBG(IL_DL_RX, f, ## a) 3060 #define D_TX(f, a...) IL_DBG(IL_DL_TX, f, ## a) 3061 #define D_ISR(f, a...) IL_DBG(IL_DL_ISR, f, ## a) 3062 #define D_LED(f, a...) IL_DBG(IL_DL_LED, f, ## a) 3063 #define D_WEP(f, a...) IL_DBG(IL_DL_WEP, f, ## a) 3064 #define D_HC(f, a...) IL_DBG(IL_DL_HCMD, f, ## a) 3065 #define D_HC_DUMP(f, a...) IL_DBG(IL_DL_HCMD_DUMP, f, ## a) 3066 #define D_EEPROM(f, a...) IL_DBG(IL_DL_EEPROM, f, ## a) 3067 #define D_CALIB(f, a...) IL_DBG(IL_DL_CALIB, f, ## a) 3068 #define D_FW(f, a...) IL_DBG(IL_DL_FW, f, ## a) 3069 #define D_RF_KILL(f, a...) IL_DBG(IL_DL_RF_KILL, f, ## a) 3070 #define D_DROP(f, a...) IL_DBG(IL_DL_DROP, f, ## a) 3071 #define D_AP(f, a...) IL_DBG(IL_DL_AP, f, ## a) 3072 #define D_TXPOWER(f, a...) IL_DBG(IL_DL_TXPOWER, f, ## a) 3073 #define D_RATE(f, a...) IL_DBG(IL_DL_RATE, f, ## a) 3074 #define D_NOTIF(f, a...) IL_DBG(IL_DL_NOTIF, f, ## a) 3075 #define D_ASSOC(f, a...) IL_DBG(IL_DL_ASSOC, f, ## a) 3076 #define D_HT(f, a...) IL_DBG(IL_DL_HT, f, ## a) 3077 #define D_STATS(f, a...) IL_DBG(IL_DL_STATS, f, ## a) 3078 #define D_TX_REPLY(f, a...) IL_DBG(IL_DL_TX_REPLY, f, ## a) 3079 #define D_QOS(f, a...) IL_DBG(IL_DL_QOS, f, ## a) 3080 #define D_RADIO(f, a...) IL_DBG(IL_DL_RADIO, f, ## a) 3081 #define D_POWER(f, a...) IL_DBG(IL_DL_POWER, f, ## a) 3082 #define D_11H(f, a...) IL_DBG(IL_DL_11H, f, ## a) 3083 3084 #endif /* __il_core_h__ */ 3085