1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /******************************************************************************
3 *
4 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 *
6 * Contact Information:
7 * Intel Linux Wireless <ilw@linux.intel.com>
8 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
9 *
10 *****************************************************************************/
11 #ifndef __il_core_h__
12 #define __il_core_h__
13
14 #include <linux/interrupt.h>
15 #include <linux/pci.h> /* for struct pci_device_id */
16 #include <linux/kernel.h>
17 #include <linux/leds.h>
18 #include <linux/wait.h>
19 #include <linux/io.h>
20 #include <net/mac80211.h>
21 #include <net/ieee80211_radiotap.h>
22
23 #include "commands.h"
24 #include "csr.h"
25 #include "prph.h"
26
27 struct il_host_cmd;
28 struct il_cmd;
29 struct il_tx_queue;
30
31 #define IL_ERR(f, a...) dev_err(&il->pci_dev->dev, f, ## a)
32 #define IL_WARN(f, a...) dev_warn(&il->pci_dev->dev, f, ## a)
33 #define IL_WARN_ONCE(f, a...) dev_warn_once(&il->pci_dev->dev, f, ## a)
34 #define IL_INFO(f, a...) dev_info(&il->pci_dev->dev, f, ## a)
35
36 #define RX_QUEUE_SIZE 256
37 #define RX_QUEUE_MASK 255
38 #define RX_QUEUE_SIZE_LOG 8
39
40 /*
41 * RX related structures and functions
42 */
43 #define RX_FREE_BUFFERS 64
44 #define RX_LOW_WATERMARK 8
45
46 #define U32_PAD(n) ((4-(n))&0x3)
47
48 /* CT-KILL constants */
49 #define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
50
51 /* Default noise level to report when noise measurement is not available.
52 * This may be because we're:
53 * 1) Not associated (4965, no beacon stats being sent to driver)
54 * 2) Scanning (noise measurement does not apply to associated channel)
55 * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
56 * Use default noise value of -127 ... this is below the range of measurable
57 * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
58 * Also, -127 works better than 0 when averaging frames with/without
59 * noise info (e.g. averaging might be done in app); measured dBm values are
60 * always negative ... using a negative value as the default keeps all
61 * averages within an s8's (used in some apps) range of negative values. */
62 #define IL_NOISE_MEAS_NOT_AVAILABLE (-127)
63
64 /*
65 * RTS threshold here is total size [2347] minus 4 FCS bytes
66 * Per spec:
67 * a value of 0 means RTS on all data/management packets
68 * a value > max MSDU size means no RTS
69 * else RTS for data/management frames where MPDU is larger
70 * than RTS value.
71 */
72 #define DEFAULT_RTS_THRESHOLD 2347U
73 #define MIN_RTS_THRESHOLD 0U
74 #define MAX_RTS_THRESHOLD 2347U
75 #define MAX_MSDU_SIZE 2304U
76 #define MAX_MPDU_SIZE 2346U
77 #define DEFAULT_BEACON_INTERVAL 100U
78 #define DEFAULT_SHORT_RETRY_LIMIT 7U
79 #define DEFAULT_LONG_RETRY_LIMIT 4U
80
81 struct il_rx_buf {
82 dma_addr_t page_dma;
83 struct page *page;
84 struct list_head list;
85 };
86
87 #define rxb_addr(r) page_address(r->page)
88
89 /* defined below */
90 struct il_device_cmd;
91
92 struct il_cmd_meta {
93 /* only for SYNC commands, iff the reply skb is wanted */
94 struct il_host_cmd *source;
95 /*
96 * only for ASYNC commands
97 * (which is somewhat stupid -- look at common.c for instance
98 * which duplicates a bunch of code because the callback isn't
99 * invoked for SYNC commands, if it were and its result passed
100 * through it would be simpler...)
101 */
102 void (*callback) (struct il_priv *il, struct il_device_cmd *cmd,
103 struct il_rx_pkt *pkt);
104
105 /* The CMD_SIZE_HUGE flag bit indicates that the command
106 * structure is stored at the end of the shared queue memory. */
107 u32 flags;
108
109 DEFINE_DMA_UNMAP_ADDR(mapping);
110 DEFINE_DMA_UNMAP_LEN(len);
111 };
112
113 /*
114 * Generic queue structure
115 *
116 * Contains common data for Rx and Tx queues
117 */
118 struct il_queue {
119 int n_bd; /* number of BDs in this queue */
120 int write_ptr; /* 1-st empty entry (idx) host_w */
121 int read_ptr; /* last used entry (idx) host_r */
122 /* use for monitoring and recovering the stuck queue */
123 dma_addr_t dma_addr; /* physical addr for BD's */
124 int n_win; /* safe queue win */
125 u32 id;
126 int low_mark; /* low watermark, resume queue if free
127 * space more than this */
128 int high_mark; /* high watermark, stop queue if free
129 * space less than this */
130 };
131
132 /**
133 * struct il_tx_queue - Tx Queue for DMA
134 * @q: generic Rx/Tx queue descriptor
135 * @bd: base of circular buffer of TFDs
136 * @cmd: array of command/TX buffer pointers
137 * @meta: array of meta data for each command/tx buffer
138 * @dma_addr_cmd: physical address of cmd/tx buffer array
139 * @skbs: array of per-TFD socket buffer pointers
140 * @time_stamp: time (in jiffies) of last read_ptr change
141 * @need_update: indicates need to update read/write idx
142 * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
143 *
144 * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
145 * descriptors) and required locking structures.
146 */
147 #define TFD_TX_CMD_SLOTS 256
148 #define TFD_CMD_SLOTS 32
149
150 struct il_tx_queue {
151 struct il_queue q;
152 void *tfds;
153 struct il_device_cmd **cmd;
154 struct il_cmd_meta *meta;
155 struct sk_buff **skbs;
156 unsigned long time_stamp;
157 u8 need_update;
158 u8 sched_retry;
159 u8 active;
160 u8 swq_id;
161 };
162
163 /*
164 * EEPROM access time values:
165 *
166 * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
167 * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
168 * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
169 * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
170 */
171 #define IL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */
172
173 #define IL_EEPROM_SEM_TIMEOUT 10 /* microseconds */
174 #define IL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
175
176 /*
177 * Regulatory channel usage flags in EEPROM struct il4965_eeprom_channel.flags.
178 *
179 * IBSS and/or AP operation is allowed *only* on those channels with
180 * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because
181 * RADAR detection is not supported by the 4965 driver, but is a
182 * requirement for establishing a new network for legal operation on channels
183 * requiring RADAR detection or restricting ACTIVE scanning.
184 *
185 * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels.
186 * It only indicates that 20 MHz channel use is supported; HT40 channel
187 * usage is indicated by a separate set of regulatory flags for each
188 * HT40 channel pair.
189 *
190 * NOTE: Using a channel inappropriately will result in a uCode error!
191 */
192 #define IL_NUM_TX_CALIB_GROUPS 5
193 enum {
194 EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */
195 EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */
196 /* Bit 2 Reserved */
197 EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */
198 EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */
199 EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */
200 /* Bit 6 Reserved (was Narrow Channel) */
201 EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */
202 };
203
204 /* SKU Capabilities */
205 /* 3945 only */
206 #define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0)
207 #define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1)
208
209 /* *regulatory* channel data format in eeprom, one for each channel.
210 * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */
211 struct il_eeprom_channel {
212 u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */
213 s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */
214 } __packed;
215
216 /* 3945 Specific */
217 #define EEPROM_3945_EEPROM_VERSION (0x2f)
218
219 /* 4965 has two radio transmitters (and 3 radio receivers) */
220 #define EEPROM_TX_POWER_TX_CHAINS (2)
221
222 /* 4965 has room for up to 8 sets of txpower calibration data */
223 #define EEPROM_TX_POWER_BANDS (8)
224
225 /* 4965 factory calibration measures txpower gain settings for
226 * each of 3 target output levels */
227 #define EEPROM_TX_POWER_MEASUREMENTS (3)
228
229 /* 4965 Specific */
230 /* 4965 driver does not work with txpower calibration version < 5 */
231 #define EEPROM_4965_TX_POWER_VERSION (5)
232 #define EEPROM_4965_EEPROM_VERSION (0x2f)
233 #define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */
234 #define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */
235 #define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */
236 #define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */
237
238 /* 2.4 GHz */
239 extern const u8 il_eeprom_band_1[14];
240
241 /*
242 * factory calibration data for one txpower level, on one channel,
243 * measured on one of the 2 tx chains (radio transmitter and associated
244 * antenna). EEPROM contains:
245 *
246 * 1) Temperature (degrees Celsius) of device when measurement was made.
247 *
248 * 2) Gain table idx used to achieve the target measurement power.
249 * This refers to the "well-known" gain tables (see 4965.h).
250 *
251 * 3) Actual measured output power, in half-dBm ("34" = 17 dBm).
252 *
253 * 4) RF power amplifier detector level measurement (not used).
254 */
255 struct il_eeprom_calib_measure {
256 u8 temperature; /* Device temperature (Celsius) */
257 u8 gain_idx; /* Index into gain table */
258 u8 actual_pow; /* Measured RF output power, half-dBm */
259 s8 pa_det; /* Power amp detector level (not used) */
260 } __packed;
261
262 /*
263 * measurement set for one channel. EEPROM contains:
264 *
265 * 1) Channel number measured
266 *
267 * 2) Measurements for each of 3 power levels for each of 2 radio transmitters
268 * (a.k.a. "tx chains") (6 measurements altogether)
269 */
270 struct il_eeprom_calib_ch_info {
271 u8 ch_num;
272 struct il_eeprom_calib_measure
273 measurements[EEPROM_TX_POWER_TX_CHAINS]
274 [EEPROM_TX_POWER_MEASUREMENTS];
275 } __packed;
276
277 /*
278 * txpower subband info.
279 *
280 * For each frequency subband, EEPROM contains the following:
281 *
282 * 1) First and last channels within range of the subband. "0" values
283 * indicate that this sample set is not being used.
284 *
285 * 2) Sample measurement sets for 2 channels close to the range endpoints.
286 */
287 struct il_eeprom_calib_subband_info {
288 u8 ch_from; /* channel number of lowest channel in subband */
289 u8 ch_to; /* channel number of highest channel in subband */
290 struct il_eeprom_calib_ch_info ch1;
291 struct il_eeprom_calib_ch_info ch2;
292 } __packed;
293
294 /*
295 * txpower calibration info. EEPROM contains:
296 *
297 * 1) Factory-measured saturation power levels (maximum levels at which
298 * tx power amplifier can output a signal without too much distortion).
299 * There is one level for 2.4 GHz band and one for 5 GHz band. These
300 * values apply to all channels within each of the bands.
301 *
302 * 2) Factory-measured power supply voltage level. This is assumed to be
303 * constant (i.e. same value applies to all channels/bands) while the
304 * factory measurements are being made.
305 *
306 * 3) Up to 8 sets of factory-measured txpower calibration values.
307 * These are for different frequency ranges, since txpower gain
308 * characteristics of the analog radio circuitry vary with frequency.
309 *
310 * Not all sets need to be filled with data;
311 * struct il_eeprom_calib_subband_info contains range of channels
312 * (0 if unused) for each set of data.
313 */
314 struct il_eeprom_calib_info {
315 u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */
316 u8 saturation_power52; /* half-dBm */
317 __le16 voltage; /* signed */
318 struct il_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS];
319 } __packed;
320
321 /* General */
322 #define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */
323 #define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */
324 #define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
325 #define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
326 #define EEPROM_VERSION (2*0x44) /* 2 bytes */
327 #define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */
328 #define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
329 #define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */
330 #define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */
331 #define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */
332
333 /* The following masks are to be applied on EEPROM_RADIO_CONFIG */
334 #define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */
335 #define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */
336 #define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */
337 #define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */
338 #define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
339 #define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
340
341 #define EEPROM_3945_RF_CFG_TYPE_MAX 0x0
342 #define EEPROM_4965_RF_CFG_TYPE_MAX 0x1
343
344 /*
345 * Per-channel regulatory data.
346 *
347 * Each channel that *might* be supported by iwl has a fixed location
348 * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
349 * txpower (MSB).
350 *
351 * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz)
352 * channels (only for 4965, not supported by 3945) appear later in the EEPROM.
353 *
354 * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
355 */
356 #define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */
357 #define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */
358 #define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */
359
360 /*
361 * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
362 * 5.0 GHz channels 7, 8, 11, 12, 16
363 * (4915-5080MHz) (none of these is ever supported)
364 */
365 #define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */
366 #define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */
367
368 /*
369 * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
370 * (5170-5320MHz)
371 */
372 #define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */
373 #define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */
374
375 /*
376 * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
377 * (5500-5700MHz)
378 */
379 #define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */
380 #define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */
381
382 /*
383 * 5.7 GHz channels 145, 149, 153, 157, 161, 165
384 * (5725-5825MHz)
385 */
386 #define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */
387 #define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */
388
389 /*
390 * 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11)
391 *
392 * The channel listed is the center of the lower 20 MHz half of the channel.
393 * The overall center frequency is actually 2 channels (10 MHz) above that,
394 * and the upper half of each HT40 channel is centered 4 channels (20 MHz) away
395 * from the lower half; e.g. the upper half of HT40 channel 1 is channel 5,
396 * and the overall HT40 channel width centers on channel 3.
397 *
398 * NOTE: The RXON command uses 20 MHz channel numbers to specify the
399 * control channel to which to tune. RXON also specifies whether the
400 * control channel is the upper or lower half of a HT40 channel.
401 *
402 * NOTE: 4965 does not support HT40 channels on 2.4 GHz.
403 */
404 #define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */
405
406 /*
407 * 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64),
408 * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161)
409 */
410 #define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */
411
412 #define EEPROM_REGULATORY_BAND_NO_HT40 (0)
413
414 int il_eeprom_init(struct il_priv *il);
415 void il_eeprom_free(struct il_priv *il);
416 const u8 *il_eeprom_query_addr(const struct il_priv *il, size_t offset);
417 u16 il_eeprom_query16(const struct il_priv *il, size_t offset);
418 int il_init_channel_map(struct il_priv *il);
419 void il_free_channel_map(struct il_priv *il);
420 const struct il_channel_info *il_get_channel_info(const struct il_priv *il,
421 enum nl80211_band band,
422 u16 channel);
423
424 #define IL_NUM_SCAN_RATES (2)
425
426 struct il4965_channel_tgd_info {
427 u8 type;
428 s8 max_power;
429 };
430
431 struct il4965_channel_tgh_info {
432 s64 last_radar_time;
433 };
434
435 #define IL4965_MAX_RATE (33)
436
437 struct il3945_clip_group {
438 /* maximum power level to prevent clipping for each rate, derived by
439 * us from this band's saturation power in EEPROM */
440 const s8 clip_powers[IL_MAX_RATES];
441 };
442
443 /* current Tx power values to use, one for each rate for each channel.
444 * requested power is limited by:
445 * -- regulatory EEPROM limits for this channel
446 * -- hardware capabilities (clip-powers)
447 * -- spectrum management
448 * -- user preference (e.g. iwconfig)
449 * when requested power is set, base power idx must also be set. */
450 struct il3945_channel_power_info {
451 struct il3945_tx_power tpc; /* actual radio and DSP gain settings */
452 s8 power_table_idx; /* actual (compenst'd) idx into gain table */
453 s8 base_power_idx; /* gain idx for power at factory temp. */
454 s8 requested_power; /* power (dBm) requested for this chnl/rate */
455 };
456
457 /* current scan Tx power values to use, one for each scan rate for each
458 * channel. */
459 struct il3945_scan_power_info {
460 struct il3945_tx_power tpc; /* actual radio and DSP gain settings */
461 s8 power_table_idx; /* actual (compenst'd) idx into gain table */
462 s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
463 };
464
465 /*
466 * One for each channel, holds all channel setup data
467 * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
468 * with one another!
469 */
470 struct il_channel_info {
471 struct il4965_channel_tgd_info tgd;
472 struct il4965_channel_tgh_info tgh;
473 struct il_eeprom_channel eeprom; /* EEPROM regulatory limit */
474 struct il_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
475 * HT40 channel */
476
477 u8 channel; /* channel number */
478 u8 flags; /* flags copied from EEPROM */
479 s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
480 s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */
481 s8 min_power; /* always 0 */
482 s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
483
484 u8 group_idx; /* 0-4, maps channel to group1/2/3/4/5 */
485 u8 band_idx; /* 0-4, maps channel to band1/2/3/4/5 */
486 enum nl80211_band band;
487
488 /* HT40 channel info */
489 s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
490 u8 ht40_flags; /* flags copied from EEPROM */
491 u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
492
493 /* Radio/DSP gain settings for each "normal" data Tx rate.
494 * These include, in addition to RF and DSP gain, a few fields for
495 * remembering/modifying gain settings (idxes). */
496 struct il3945_channel_power_info power_info[IL4965_MAX_RATE];
497
498 /* Radio/DSP gain settings for each scan rate, for directed scans. */
499 struct il3945_scan_power_info scan_pwr_info[IL_NUM_SCAN_RATES];
500 };
501
502 #define IL_TX_FIFO_BK 0 /* shared */
503 #define IL_TX_FIFO_BE 1
504 #define IL_TX_FIFO_VI 2 /* shared */
505 #define IL_TX_FIFO_VO 3
506 #define IL_TX_FIFO_UNUSED -1
507
508 /* Minimum number of queues. MAX_NUM is defined in hw specific files.
509 * Set the minimum to accommodate the 4 standard TX queues, 1 command
510 * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
511 #define IL_MIN_NUM_QUEUES 10
512
513 #define IL_DEFAULT_CMD_QUEUE_NUM 4
514
515 #define IEEE80211_DATA_LEN 2304
516 #define IEEE80211_4ADDR_LEN 30
517 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
518 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
519
520 struct il_frame {
521 union {
522 struct ieee80211_hdr frame;
523 struct il_tx_beacon_cmd beacon;
524 u8 raw[IEEE80211_FRAME_LEN];
525 u8 cmd[360];
526 } u;
527 struct list_head list;
528 };
529
530 enum {
531 CMD_SYNC = 0,
532 CMD_SIZE_NORMAL = 0,
533 CMD_NO_SKB = 0,
534 CMD_SIZE_HUGE = (1 << 0),
535 CMD_ASYNC = (1 << 1),
536 CMD_WANT_SKB = (1 << 2),
537 CMD_MAPPED = (1 << 3),
538 };
539
540 #define DEF_CMD_PAYLOAD_SIZE 320
541
542 /**
543 * struct il_device_cmd
544 *
545 * For allocation of the command and tx queues, this establishes the overall
546 * size of the largest command we send to uCode, except for a scan command
547 * (which is relatively huge; space is allocated separately).
548 */
549 struct il_device_cmd {
550 struct il_cmd_header hdr; /* uCode API */
551 union {
552 u32 flags;
553 u8 val8;
554 u16 val16;
555 u32 val32;
556 struct il_tx_cmd tx;
557 u8 payload[DEF_CMD_PAYLOAD_SIZE];
558 } __packed cmd;
559 } __packed;
560
561 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct il_device_cmd))
562
563 struct il_host_cmd {
564 const void *data;
565 unsigned long reply_page;
566 void (*callback) (struct il_priv *il, struct il_device_cmd *cmd,
567 struct il_rx_pkt *pkt);
568 u32 flags;
569 u16 len;
570 u8 id;
571 };
572
573 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8
574 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4
575 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12
576
577 /**
578 * struct il_rx_queue - Rx queue
579 * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
580 * @bd_dma: bus address of buffer of receive buffer descriptors (rbd)
581 * @read: Shared idx to newest available Rx buffer
582 * @write: Shared idx to oldest written Rx packet
583 * @free_count: Number of pre-allocated buffers in rx_free
584 * @rx_free: list of free SKBs for use
585 * @rx_used: List of Rx buffers with no SKB
586 * @need_update: flag to indicate we need to update read/write idx
587 * @rb_stts: driver's pointer to receive buffer status
588 * @rb_stts_dma: bus address of receive buffer status
589 *
590 * NOTE: rx_free and rx_used are used as a FIFO for il_rx_bufs
591 */
592 struct il_rx_queue {
593 __le32 *bd;
594 dma_addr_t bd_dma;
595 struct il_rx_buf pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
596 struct il_rx_buf *queue[RX_QUEUE_SIZE];
597 u32 read;
598 u32 write;
599 u32 free_count;
600 u32 write_actual;
601 struct list_head rx_free;
602 struct list_head rx_used;
603 int need_update;
604 struct il_rb_status *rb_stts;
605 dma_addr_t rb_stts_dma;
606 spinlock_t lock;
607 };
608
609 #define IL_SUPPORTED_RATES_IE_LEN 8
610
611 #define MAX_TID_COUNT 9
612
613 #define IL_INVALID_RATE 0xFF
614 #define IL_INVALID_VALUE -1
615
616 /**
617 * struct il_ht_agg -- aggregation status while waiting for block-ack
618 * @txq_id: Tx queue used for Tx attempt
619 * @frame_count: # frames attempted by Tx command
620 * @wait_for_ba: Expect block-ack before next Tx reply
621 * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx win
622 * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx win
623 * @bitmap1: High order, one bit for each frame pending ACK in Tx win
624 * @rate_n_flags: Rate at which Tx was attempted
625 *
626 * If C_TX indicates that aggregation was attempted, driver must wait
627 * for block ack (N_COMPRESSED_BA). This struct stores tx reply info
628 * until block ack arrives.
629 */
630 struct il_ht_agg {
631 u16 txq_id;
632 u16 frame_count;
633 u16 wait_for_ba;
634 u16 start_idx;
635 u64 bitmap;
636 u32 rate_n_flags;
637 #define IL_AGG_OFF 0
638 #define IL_AGG_ON 1
639 #define IL_EMPTYING_HW_QUEUE_ADDBA 2
640 #define IL_EMPTYING_HW_QUEUE_DELBA 3
641 u8 state;
642 };
643
644 struct il_tid_data {
645 u16 seq_number; /* 4965 only */
646 u16 tfds_in_queue;
647 struct il_ht_agg agg;
648 };
649
650 struct il_hw_key {
651 u32 cipher;
652 int keylen;
653 u8 keyidx;
654 u8 key[32];
655 };
656
657 union il_ht_rate_supp {
658 u16 rates;
659 struct {
660 u8 siso_rate;
661 u8 mimo_rate;
662 };
663 };
664
665 #define CFG_HT_RX_AMPDU_FACTOR_8K (0x0)
666 #define CFG_HT_RX_AMPDU_FACTOR_16K (0x1)
667 #define CFG_HT_RX_AMPDU_FACTOR_32K (0x2)
668 #define CFG_HT_RX_AMPDU_FACTOR_64K (0x3)
669 #define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K
670 #define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K
671 #define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K
672
673 /*
674 * Maximal MPDU density for TX aggregation
675 * 4 - 2us density
676 * 5 - 4us density
677 * 6 - 8us density
678 * 7 - 16us density
679 */
680 #define CFG_HT_MPDU_DENSITY_2USEC (0x4)
681 #define CFG_HT_MPDU_DENSITY_4USEC (0x5)
682 #define CFG_HT_MPDU_DENSITY_8USEC (0x6)
683 #define CFG_HT_MPDU_DENSITY_16USEC (0x7)
684 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
685 #define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
686 #define CFG_HT_MPDU_DENSITY_MIN (0x1)
687
688 struct il_ht_config {
689 bool single_chain_sufficient;
690 enum ieee80211_smps_mode smps; /* current smps mode */
691 };
692
693 /* QoS structures */
694 struct il_qos_info {
695 int qos_active;
696 struct il_qosparam_cmd def_qos_parm;
697 };
698
699 /*
700 * Structure should be accessed with sta_lock held. When station addition
701 * is in progress (IL_STA_UCODE_INPROGRESS) it is possible to access only
702 * the commands (il_addsta_cmd and il_link_quality_cmd) without
703 * sta_lock held.
704 */
705 struct il_station_entry {
706 struct il_addsta_cmd sta;
707 struct il_tid_data tid[MAX_TID_COUNT];
708 u8 used;
709 struct il_hw_key keyinfo;
710 struct il_link_quality_cmd *lq;
711 };
712
713 struct il_station_priv_common {
714 u8 sta_id;
715 };
716
717 /**
718 * struct il_vif_priv - driver's ilate per-interface information
719 *
720 * When mac80211 allocates a virtual interface, it can allocate
721 * space for us to put data into.
722 */
723 struct il_vif_priv {
724 u8 ibss_bssid_sta_id;
725 };
726
727 /* one for each uCode image (inst/data, boot/init/runtime) */
728 struct fw_desc {
729 void *v_addr; /* access by driver */
730 dma_addr_t p_addr; /* access by card's busmaster DMA */
731 u32 len; /* bytes */
732 };
733
734 /* uCode file layout */
735 struct il_ucode_header {
736 __le32 ver; /* major/minor/API/serial */
737 struct {
738 __le32 inst_size; /* bytes of runtime code */
739 __le32 data_size; /* bytes of runtime data */
740 __le32 init_size; /* bytes of init code */
741 __le32 init_data_size; /* bytes of init data */
742 __le32 boot_size; /* bytes of bootstrap code */
743 u8 data[0]; /* in same order as sizes */
744 } v1;
745 };
746
747 struct il4965_ibss_seq {
748 u8 mac[ETH_ALEN];
749 u16 seq_num;
750 u16 frag_num;
751 unsigned long packet_time;
752 struct list_head list;
753 };
754
755 struct il_sensitivity_ranges {
756 u16 min_nrg_cck;
757 u16 max_nrg_cck;
758
759 u16 nrg_th_cck;
760 u16 nrg_th_ofdm;
761
762 u16 auto_corr_min_ofdm;
763 u16 auto_corr_min_ofdm_mrc;
764 u16 auto_corr_min_ofdm_x1;
765 u16 auto_corr_min_ofdm_mrc_x1;
766
767 u16 auto_corr_max_ofdm;
768 u16 auto_corr_max_ofdm_mrc;
769 u16 auto_corr_max_ofdm_x1;
770 u16 auto_corr_max_ofdm_mrc_x1;
771
772 u16 auto_corr_max_cck;
773 u16 auto_corr_max_cck_mrc;
774 u16 auto_corr_min_cck;
775 u16 auto_corr_min_cck_mrc;
776
777 u16 barker_corr_th_min;
778 u16 barker_corr_th_min_mrc;
779 u16 nrg_th_cca;
780 };
781
782 /**
783 * struct il_hw_params
784 * @bcast_id: f/w broadcast station ID
785 * @max_txq_num: Max # Tx queues supported
786 * @dma_chnl_num: Number of Tx DMA/FIFO channels
787 * @scd_bc_tbls_size: size of scheduler byte count tables
788 * @tfd_size: TFD size
789 * @tx/rx_chains_num: Number of TX/RX chains
790 * @valid_tx/rx_ant: usable antennas
791 * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
792 * @max_rxq_log: Log-base-2 of max_rxq_size
793 * @rx_page_order: Rx buffer page order
794 * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
795 * @max_stations:
796 * @ht40_channel: is 40MHz width possible in band 2.4
797 * BIT(NL80211_BAND_5GHZ) BIT(NL80211_BAND_5GHZ)
798 * @sw_crypto: 0 for hw, 1 for sw
799 * @max_xxx_size: for ucode uses
800 * @ct_kill_threshold: temperature threshold
801 * @beacon_time_tsf_bits: number of valid tsf bits for beacon time
802 * @struct il_sensitivity_ranges: range of sensitivity values
803 */
804 struct il_hw_params {
805 u8 bcast_id;
806 u8 max_txq_num;
807 u8 dma_chnl_num;
808 u16 scd_bc_tbls_size;
809 u32 tfd_size;
810 u8 tx_chains_num;
811 u8 rx_chains_num;
812 u8 valid_tx_ant;
813 u8 valid_rx_ant;
814 u16 max_rxq_size;
815 u16 max_rxq_log;
816 u32 rx_page_order;
817 u32 rx_wrt_ptr_reg;
818 u8 max_stations;
819 u8 ht40_channel;
820 u8 max_beacon_itrvl; /* in 1024 ms */
821 u32 max_inst_size;
822 u32 max_data_size;
823 u32 max_bsm_size;
824 u32 ct_kill_threshold; /* value in hw-dependent units */
825 u16 beacon_time_tsf_bits;
826 const struct il_sensitivity_ranges *sens;
827 };
828
829 /******************************************************************************
830 *
831 * Functions implemented in core module which are forward declared here
832 * for use by iwl-[4-5].c
833 *
834 * NOTE: The implementation of these functions are not hardware specific
835 * which is why they are in the core module files.
836 *
837 * Naming convention --
838 * il_ <-- Is part of iwlwifi
839 * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
840 * il4965_bg_ <-- Called from work queue context
841 * il4965_mac_ <-- mac80211 callback
842 *
843 ****************************************************************************/
844 void il4965_update_chain_flags(struct il_priv *il);
845 extern const u8 il_bcast_addr[ETH_ALEN];
846 int il_queue_space(const struct il_queue *q);
847 static inline int
il_queue_used(const struct il_queue * q,int i)848 il_queue_used(const struct il_queue *q, int i)
849 {
850 return q->write_ptr >= q->read_ptr ? (i >= q->read_ptr &&
851 i < q->write_ptr) : !(i <
852 q->read_ptr
853 && i >=
854 q->
855 write_ptr);
856 }
857
858 static inline u8
il_get_cmd_idx(struct il_queue * q,u32 idx,int is_huge)859 il_get_cmd_idx(struct il_queue *q, u32 idx, int is_huge)
860 {
861 /*
862 * This is for init calibration result and scan command which
863 * required buffer > TFD_MAX_PAYLOAD_SIZE,
864 * the big buffer at end of command array
865 */
866 if (is_huge)
867 return q->n_win; /* must be power of 2 */
868
869 /* Otherwise, use normal size buffers */
870 return idx & (q->n_win - 1);
871 }
872
873 struct il_dma_ptr {
874 dma_addr_t dma;
875 void *addr;
876 size_t size;
877 };
878
879 #define IL_OPERATION_MODE_AUTO 0
880 #define IL_OPERATION_MODE_HT_ONLY 1
881 #define IL_OPERATION_MODE_MIXED 2
882 #define IL_OPERATION_MODE_20MHZ 3
883
884 #define IL_TX_CRC_SIZE 4
885 #define IL_TX_DELIMITER_SIZE 4
886
887 #define TX_POWER_IL_ILLEGAL_VOLTAGE -10000
888
889 /* Sensitivity and chain noise calibration */
890 #define INITIALIZATION_VALUE 0xFFFF
891 #define IL4965_CAL_NUM_BEACONS 20
892 #define IL_CAL_NUM_BEACONS 16
893 #define MAXIMUM_ALLOWED_PATHLOSS 15
894
895 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
896
897 #define MAX_FA_OFDM 50
898 #define MIN_FA_OFDM 5
899 #define MAX_FA_CCK 50
900 #define MIN_FA_CCK 5
901
902 #define AUTO_CORR_STEP_OFDM 1
903
904 #define AUTO_CORR_STEP_CCK 3
905 #define AUTO_CORR_MAX_TH_CCK 160
906
907 #define NRG_DIFF 2
908 #define NRG_STEP_CCK 2
909 #define NRG_MARGIN 8
910 #define MAX_NUMBER_CCK_NO_FA 100
911
912 #define AUTO_CORR_CCK_MIN_VAL_DEF (125)
913
914 #define CHAIN_A 0
915 #define CHAIN_B 1
916 #define CHAIN_C 2
917 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
918 #define ALL_BAND_FILTER 0xFF00
919 #define IN_BAND_FILTER 0xFF
920 #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
921
922 #define NRG_NUM_PREV_STAT_L 20
923 #define NUM_RX_CHAINS 3
924
925 enum il4965_false_alarm_state {
926 IL_FA_TOO_MANY = 0,
927 IL_FA_TOO_FEW = 1,
928 IL_FA_GOOD_RANGE = 2,
929 };
930
931 enum il4965_chain_noise_state {
932 IL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
933 IL_CHAIN_NOISE_ACCUMULATE,
934 IL_CHAIN_NOISE_CALIBRATED,
935 IL_CHAIN_NOISE_DONE,
936 };
937
938 enum ucode_type {
939 UCODE_NONE = 0,
940 UCODE_INIT,
941 UCODE_RT
942 };
943
944 /* Sensitivity calib data */
945 struct il_sensitivity_data {
946 u32 auto_corr_ofdm;
947 u32 auto_corr_ofdm_mrc;
948 u32 auto_corr_ofdm_x1;
949 u32 auto_corr_ofdm_mrc_x1;
950 u32 auto_corr_cck;
951 u32 auto_corr_cck_mrc;
952
953 u32 last_bad_plcp_cnt_ofdm;
954 u32 last_fa_cnt_ofdm;
955 u32 last_bad_plcp_cnt_cck;
956 u32 last_fa_cnt_cck;
957
958 u32 nrg_curr_state;
959 u32 nrg_prev_state;
960 u32 nrg_value[10];
961 u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
962 u32 nrg_silence_ref;
963 u32 nrg_energy_idx;
964 u32 nrg_silence_idx;
965 u32 nrg_th_cck;
966 s32 nrg_auto_corr_silence_diff;
967 u32 num_in_cck_no_fa;
968 u32 nrg_th_ofdm;
969
970 u16 barker_corr_th_min;
971 u16 barker_corr_th_min_mrc;
972 u16 nrg_th_cca;
973 };
974
975 /* Chain noise (differential Rx gain) calib data */
976 struct il_chain_noise_data {
977 u32 active_chains;
978 u32 chain_noise_a;
979 u32 chain_noise_b;
980 u32 chain_noise_c;
981 u32 chain_signal_a;
982 u32 chain_signal_b;
983 u32 chain_signal_c;
984 u16 beacon_count;
985 u8 disconn_array[NUM_RX_CHAINS];
986 u8 delta_gain_code[NUM_RX_CHAINS];
987 u8 radio_write;
988 u8 state;
989 };
990
991 #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
992 #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
993
994 #define IL_TRAFFIC_ENTRIES (256)
995 #define IL_TRAFFIC_ENTRY_SIZE (64)
996
997 enum {
998 MEASUREMENT_READY = (1 << 0),
999 MEASUREMENT_ACTIVE = (1 << 1),
1000 };
1001
1002 /* interrupt stats */
1003 struct isr_stats {
1004 u32 hw;
1005 u32 sw;
1006 u32 err_code;
1007 u32 sch;
1008 u32 alive;
1009 u32 rfkill;
1010 u32 ctkill;
1011 u32 wakeup;
1012 u32 rx;
1013 u32 handlers[IL_CN_MAX];
1014 u32 tx;
1015 u32 unhandled;
1016 };
1017
1018 /* management stats */
1019 enum il_mgmt_stats {
1020 MANAGEMENT_ASSOC_REQ = 0,
1021 MANAGEMENT_ASSOC_RESP,
1022 MANAGEMENT_REASSOC_REQ,
1023 MANAGEMENT_REASSOC_RESP,
1024 MANAGEMENT_PROBE_REQ,
1025 MANAGEMENT_PROBE_RESP,
1026 MANAGEMENT_BEACON,
1027 MANAGEMENT_ATIM,
1028 MANAGEMENT_DISASSOC,
1029 MANAGEMENT_AUTH,
1030 MANAGEMENT_DEAUTH,
1031 MANAGEMENT_ACTION,
1032 MANAGEMENT_MAX,
1033 };
1034 /* control stats */
1035 enum il_ctrl_stats {
1036 CONTROL_BACK_REQ = 0,
1037 CONTROL_BACK,
1038 CONTROL_PSPOLL,
1039 CONTROL_RTS,
1040 CONTROL_CTS,
1041 CONTROL_ACK,
1042 CONTROL_CFEND,
1043 CONTROL_CFENDACK,
1044 CONTROL_MAX,
1045 };
1046
1047 struct traffic_stats {
1048 #ifdef CONFIG_IWLEGACY_DEBUGFS
1049 u32 mgmt[MANAGEMENT_MAX];
1050 u32 ctrl[CONTROL_MAX];
1051 u32 data_cnt;
1052 u64 data_bytes;
1053 #endif
1054 };
1055
1056 /*
1057 * host interrupt timeout value
1058 * used with setting interrupt coalescing timer
1059 * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
1060 *
1061 * default interrupt coalescing timer is 64 x 32 = 2048 usecs
1062 * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs
1063 */
1064 #define IL_HOST_INT_TIMEOUT_MAX (0xFF)
1065 #define IL_HOST_INT_TIMEOUT_DEF (0x40)
1066 #define IL_HOST_INT_TIMEOUT_MIN (0x0)
1067 #define IL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF)
1068 #define IL_HOST_INT_CALIB_TIMEOUT_DEF (0x10)
1069 #define IL_HOST_INT_CALIB_TIMEOUT_MIN (0x0)
1070
1071 #define IL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
1072
1073 /* TX queue watchdog timeouts in mSecs */
1074 #define IL_DEF_WD_TIMEOUT (2000)
1075 #define IL_LONG_WD_TIMEOUT (10000)
1076 #define IL_MAX_WD_TIMEOUT (120000)
1077
1078 struct il_force_reset {
1079 int reset_request_count;
1080 int reset_success_count;
1081 int reset_reject_count;
1082 unsigned long reset_duration;
1083 unsigned long last_force_reset_jiffies;
1084 };
1085
1086 /* extend beacon time format bit shifting */
1087 /*
1088 * for _3945 devices
1089 * bits 31:24 - extended
1090 * bits 23:0 - interval
1091 */
1092 #define IL3945_EXT_BEACON_TIME_POS 24
1093 /*
1094 * for _4965 devices
1095 * bits 31:22 - extended
1096 * bits 21:0 - interval
1097 */
1098 #define IL4965_EXT_BEACON_TIME_POS 22
1099
1100 struct il_rxon_context {
1101 struct ieee80211_vif *vif;
1102 };
1103
1104 struct il_power_mgr {
1105 struct il_powertable_cmd sleep_cmd;
1106 struct il_powertable_cmd sleep_cmd_next;
1107 int debug_sleep_level_override;
1108 bool pci_pm;
1109 bool ps_disabled;
1110 };
1111
1112 struct il_priv {
1113 struct ieee80211_hw *hw;
1114 struct ieee80211_channel *ieee_channels;
1115 struct ieee80211_rate *ieee_rates;
1116
1117 struct il_cfg *cfg;
1118 const struct il_ops *ops;
1119 #ifdef CONFIG_IWLEGACY_DEBUGFS
1120 const struct il_debugfs_ops *debugfs_ops;
1121 #endif
1122
1123 /* temporary frame storage list */
1124 struct list_head free_frames;
1125 int frames_count;
1126
1127 enum nl80211_band band;
1128 int alloc_rxb_page;
1129
1130 void (*handlers[IL_CN_MAX]) (struct il_priv *il,
1131 struct il_rx_buf *rxb);
1132
1133 struct ieee80211_supported_band bands[NUM_NL80211_BANDS];
1134
1135 /* spectrum measurement report caching */
1136 struct il_spectrum_notification measure_report;
1137 u8 measurement_status;
1138
1139 /* ucode beacon time */
1140 u32 ucode_beacon_time;
1141 int missed_beacon_threshold;
1142
1143 /* track IBSS manager (last beacon) status */
1144 u32 ibss_manager;
1145
1146 /* force reset */
1147 struct il_force_reset force_reset;
1148
1149 /* we allocate array of il_channel_info for NIC's valid channels.
1150 * Access via channel # using indirect idx array */
1151 struct il_channel_info *channel_info; /* channel info array */
1152 u8 channel_count; /* # of channels */
1153
1154 /* thermal calibration */
1155 s32 temperature; /* degrees Kelvin */
1156 s32 last_temperature;
1157
1158 /* Scan related variables */
1159 unsigned long scan_start;
1160 unsigned long scan_start_tsf;
1161 void *scan_cmd;
1162 enum nl80211_band scan_band;
1163 struct cfg80211_scan_request *scan_request;
1164 struct ieee80211_vif *scan_vif;
1165 u8 scan_tx_ant[NUM_NL80211_BANDS];
1166 u8 mgmt_tx_ant;
1167
1168 /* spinlock */
1169 spinlock_t lock; /* protect general shared data */
1170 spinlock_t hcmd_lock; /* protect hcmd */
1171 spinlock_t reg_lock; /* protect hw register access */
1172 struct mutex mutex;
1173
1174 /* basic pci-network driver stuff */
1175 struct pci_dev *pci_dev;
1176
1177 /* pci hardware address support */
1178 void __iomem *hw_base;
1179 u32 hw_rev;
1180 u32 hw_wa_rev;
1181 u8 rev_id;
1182
1183 /* command queue number */
1184 u8 cmd_queue;
1185
1186 /* max number of station keys */
1187 u8 sta_key_max_num;
1188
1189 /* EEPROM MAC addresses */
1190 struct mac_address addresses[1];
1191
1192 /* uCode images, save to reload in case of failure */
1193 int fw_idx; /* firmware we're trying to load */
1194 u32 ucode_ver; /* version of ucode, copy of
1195 il_ucode.ver */
1196 struct fw_desc ucode_code; /* runtime inst */
1197 struct fw_desc ucode_data; /* runtime data original */
1198 struct fw_desc ucode_data_backup; /* runtime data save/restore */
1199 struct fw_desc ucode_init; /* initialization inst */
1200 struct fw_desc ucode_init_data; /* initialization data */
1201 struct fw_desc ucode_boot; /* bootstrap inst */
1202 enum ucode_type ucode_type;
1203 u8 ucode_write_complete; /* the image write is complete */
1204 char firmware_name[25];
1205
1206 struct ieee80211_vif *vif;
1207
1208 struct il_qos_info qos_data;
1209
1210 struct {
1211 bool enabled;
1212 bool is_40mhz;
1213 bool non_gf_sta_present;
1214 u8 protection;
1215 u8 extension_chan_offset;
1216 } ht;
1217
1218 /*
1219 * We declare this const so it can only be
1220 * changed via explicit cast within the
1221 * routines that actually update the physical
1222 * hardware.
1223 */
1224 const struct il_rxon_cmd active;
1225 struct il_rxon_cmd staging;
1226
1227 struct il_rxon_time_cmd timing;
1228
1229 __le16 switch_channel;
1230
1231 /* 1st responses from initialize and runtime uCode images.
1232 * _4965's initialize alive response contains some calibration data. */
1233 struct il_init_alive_resp card_alive_init;
1234 struct il_alive_resp card_alive;
1235
1236 u16 active_rate;
1237
1238 u8 start_calib;
1239 struct il_sensitivity_data sensitivity_data;
1240 struct il_chain_noise_data chain_noise_data;
1241 __le16 sensitivity_tbl[HD_TBL_SIZE];
1242
1243 struct il_ht_config current_ht_config;
1244
1245 /* Rate scaling data */
1246 u8 retry_rate;
1247
1248 wait_queue_head_t wait_command_queue;
1249
1250 int activity_timer_active;
1251
1252 /* Rx and Tx DMA processing queues */
1253 struct il_rx_queue rxq;
1254 struct il_tx_queue *txq;
1255 unsigned long txq_ctx_active_msk;
1256 struct il_dma_ptr kw; /* keep warm address */
1257 struct il_dma_ptr scd_bc_tbls;
1258
1259 u32 scd_base_addr; /* scheduler sram base address */
1260
1261 unsigned long status;
1262
1263 /* counts mgmt, ctl, and data packets */
1264 struct traffic_stats tx_stats;
1265 struct traffic_stats rx_stats;
1266
1267 /* counts interrupts */
1268 struct isr_stats isr_stats;
1269
1270 struct il_power_mgr power_data;
1271
1272 /* context information */
1273 u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */
1274
1275 /* station table variables */
1276
1277 /* Note: if lock and sta_lock are needed, lock must be acquired first */
1278 spinlock_t sta_lock;
1279 int num_stations;
1280 struct il_station_entry stations[IL_STATION_COUNT];
1281 unsigned long ucode_key_table;
1282
1283 /* queue refcounts */
1284 #define IL_MAX_HW_QUEUES 32
1285 unsigned long queue_stopped[BITS_TO_LONGS(IL_MAX_HW_QUEUES)];
1286 #define IL_STOP_REASON_PASSIVE 0
1287 unsigned long stop_reason;
1288 /* for each AC */
1289 atomic_t queue_stop_count[4];
1290
1291 /* Indication if ieee80211_ops->open has been called */
1292 u8 is_open;
1293
1294 u8 mac80211_registered;
1295
1296 /* eeprom -- this is in the card's little endian byte order */
1297 u8 *eeprom;
1298 struct il_eeprom_calib_info *calib_info;
1299
1300 enum nl80211_iftype iw_mode;
1301
1302 /* Last Rx'd beacon timestamp */
1303 u64 timestamp;
1304
1305 union {
1306 #if IS_ENABLED(CONFIG_IWL3945)
1307 struct {
1308 void *shared_virt;
1309 dma_addr_t shared_phys;
1310
1311 struct delayed_work thermal_periodic;
1312 struct delayed_work rfkill_poll;
1313
1314 struct il3945_notif_stats stats;
1315 #ifdef CONFIG_IWLEGACY_DEBUGFS
1316 struct il3945_notif_stats accum_stats;
1317 struct il3945_notif_stats delta_stats;
1318 struct il3945_notif_stats max_delta;
1319 #endif
1320
1321 u32 sta_supp_rates;
1322 int last_rx_rssi; /* From Rx packet stats */
1323
1324 /* Rx'd packet timing information */
1325 u32 last_beacon_time;
1326 u64 last_tsf;
1327
1328 /*
1329 * each calibration channel group in the
1330 * EEPROM has a derived clip setting for
1331 * each rate.
1332 */
1333 const struct il3945_clip_group clip_groups[5];
1334
1335 } _3945;
1336 #endif
1337 #if IS_ENABLED(CONFIG_IWL4965)
1338 struct {
1339 struct il_rx_phy_res last_phy_res;
1340 bool last_phy_res_valid;
1341 u32 ampdu_ref;
1342
1343 struct completion firmware_loading_complete;
1344
1345 /*
1346 * chain noise reset and gain commands are the
1347 * two extra calibration commands follows the standard
1348 * phy calibration commands
1349 */
1350 u8 phy_calib_chain_noise_reset_cmd;
1351 u8 phy_calib_chain_noise_gain_cmd;
1352
1353 u8 key_mapping_keys;
1354 struct il_wep_key wep_keys[WEP_KEYS_MAX];
1355
1356 struct il_notif_stats stats;
1357 #ifdef CONFIG_IWLEGACY_DEBUGFS
1358 struct il_notif_stats accum_stats;
1359 struct il_notif_stats delta_stats;
1360 struct il_notif_stats max_delta;
1361 #endif
1362
1363 } _4965;
1364 #endif
1365 };
1366
1367 struct il_hw_params hw_params;
1368
1369 u32 inta_mask;
1370
1371 struct workqueue_struct *workqueue;
1372
1373 struct work_struct restart;
1374 struct work_struct scan_completed;
1375 struct work_struct rx_replenish;
1376 struct work_struct abort_scan;
1377
1378 bool beacon_enabled;
1379 struct sk_buff *beacon_skb;
1380
1381 struct work_struct tx_flush;
1382
1383 struct tasklet_struct irq_tasklet;
1384
1385 struct delayed_work init_alive_start;
1386 struct delayed_work alive_start;
1387 struct delayed_work scan_check;
1388
1389 /* TX Power */
1390 s8 tx_power_user_lmt;
1391 s8 tx_power_device_lmt;
1392 s8 tx_power_next;
1393
1394 #ifdef CONFIG_IWLEGACY_DEBUG
1395 /* debugging info */
1396 u32 debug_level; /* per device debugging will override global
1397 il_debug_level if set */
1398 #endif /* CONFIG_IWLEGACY_DEBUG */
1399 #ifdef CONFIG_IWLEGACY_DEBUGFS
1400 /* debugfs */
1401 u16 tx_traffic_idx;
1402 u16 rx_traffic_idx;
1403 u8 *tx_traffic;
1404 u8 *rx_traffic;
1405 struct dentry *debugfs_dir;
1406 u32 dbgfs_sram_offset, dbgfs_sram_len;
1407 bool disable_ht40;
1408 #endif /* CONFIG_IWLEGACY_DEBUGFS */
1409
1410 struct work_struct txpower_work;
1411 bool disable_sens_cal;
1412 bool disable_chain_noise_cal;
1413 bool disable_tx_power_cal;
1414 struct work_struct run_time_calib_work;
1415 struct timer_list stats_periodic;
1416 struct timer_list watchdog;
1417 bool hw_ready;
1418
1419 struct led_classdev led;
1420 unsigned long blink_on, blink_off;
1421 bool led_registered;
1422 }; /*il_priv */
1423
1424 static inline void
il_txq_ctx_activate(struct il_priv * il,int txq_id)1425 il_txq_ctx_activate(struct il_priv *il, int txq_id)
1426 {
1427 set_bit(txq_id, &il->txq_ctx_active_msk);
1428 }
1429
1430 static inline void
il_txq_ctx_deactivate(struct il_priv * il,int txq_id)1431 il_txq_ctx_deactivate(struct il_priv *il, int txq_id)
1432 {
1433 clear_bit(txq_id, &il->txq_ctx_active_msk);
1434 }
1435
1436 static inline int
il_is_associated(struct il_priv * il)1437 il_is_associated(struct il_priv *il)
1438 {
1439 return (il->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1440 }
1441
1442 static inline int
il_is_any_associated(struct il_priv * il)1443 il_is_any_associated(struct il_priv *il)
1444 {
1445 return il_is_associated(il);
1446 }
1447
1448 static inline int
il_is_channel_valid(const struct il_channel_info * ch_info)1449 il_is_channel_valid(const struct il_channel_info *ch_info)
1450 {
1451 if (ch_info == NULL)
1452 return 0;
1453 return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1454 }
1455
1456 static inline int
il_is_channel_radar(const struct il_channel_info * ch_info)1457 il_is_channel_radar(const struct il_channel_info *ch_info)
1458 {
1459 return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1460 }
1461
1462 static inline u8
il_is_channel_a_band(const struct il_channel_info * ch_info)1463 il_is_channel_a_band(const struct il_channel_info *ch_info)
1464 {
1465 return ch_info->band == NL80211_BAND_5GHZ;
1466 }
1467
1468 static inline int
il_is_channel_passive(const struct il_channel_info * ch)1469 il_is_channel_passive(const struct il_channel_info *ch)
1470 {
1471 return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1472 }
1473
1474 static inline int
il_is_channel_ibss(const struct il_channel_info * ch)1475 il_is_channel_ibss(const struct il_channel_info *ch)
1476 {
1477 return (ch->flags & EEPROM_CHANNEL_IBSS) ? 1 : 0;
1478 }
1479
1480 static inline void
__il_free_pages(struct il_priv * il,struct page * page)1481 __il_free_pages(struct il_priv *il, struct page *page)
1482 {
1483 __free_pages(page, il->hw_params.rx_page_order);
1484 il->alloc_rxb_page--;
1485 }
1486
1487 static inline void
il_free_pages(struct il_priv * il,unsigned long page)1488 il_free_pages(struct il_priv *il, unsigned long page)
1489 {
1490 free_pages(page, il->hw_params.rx_page_order);
1491 il->alloc_rxb_page--;
1492 }
1493
1494 #define IWLWIFI_VERSION "in-tree:"
1495 #define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
1496 #define DRV_AUTHOR "<ilw@linux.intel.com>"
1497
1498 #define IL_PCI_DEVICE(dev, subdev, cfg) \
1499 .vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \
1500 .subvendor = PCI_ANY_ID, .subdevice = (subdev), \
1501 .driver_data = (kernel_ulong_t)&(cfg)
1502
1503 #define TIME_UNIT 1024
1504
1505 #define IL_SKU_G 0x1
1506 #define IL_SKU_A 0x2
1507 #define IL_SKU_N 0x8
1508
1509 #define IL_CMD(x) case x: return #x
1510
1511 /* Size of one Rx buffer in host DRAM */
1512 #define IL_RX_BUF_SIZE_3K (3 * 1000) /* 3945 only */
1513 #define IL_RX_BUF_SIZE_4K (4 * 1024)
1514 #define IL_RX_BUF_SIZE_8K (8 * 1024)
1515
1516 #ifdef CONFIG_IWLEGACY_DEBUGFS
1517 struct il_debugfs_ops {
1518 ssize_t(*rx_stats_read) (struct file *file, char __user *user_buf,
1519 size_t count, loff_t *ppos);
1520 ssize_t(*tx_stats_read) (struct file *file, char __user *user_buf,
1521 size_t count, loff_t *ppos);
1522 ssize_t(*general_stats_read) (struct file *file,
1523 char __user *user_buf, size_t count,
1524 loff_t *ppos);
1525 };
1526 #endif
1527
1528 struct il_ops {
1529 /* Handling TX */
1530 void (*txq_update_byte_cnt_tbl) (struct il_priv *il,
1531 struct il_tx_queue *txq,
1532 u16 byte_cnt);
1533 int (*txq_attach_buf_to_tfd) (struct il_priv *il,
1534 struct il_tx_queue *txq, dma_addr_t addr,
1535 u16 len, u8 reset, u8 pad);
1536 void (*txq_free_tfd) (struct il_priv *il, struct il_tx_queue *txq);
1537 int (*txq_init) (struct il_priv *il, struct il_tx_queue *txq);
1538 /* alive notification after init uCode load */
1539 void (*init_alive_start) (struct il_priv *il);
1540 /* check validity of rtc data address */
1541 int (*is_valid_rtc_data_addr) (u32 addr);
1542 /* 1st ucode load */
1543 int (*load_ucode) (struct il_priv *il);
1544
1545 void (*dump_nic_error_log) (struct il_priv *il);
1546 int (*dump_fh) (struct il_priv *il, char **buf, bool display);
1547 int (*set_channel_switch) (struct il_priv *il,
1548 struct ieee80211_channel_switch *ch_switch);
1549 /* power management */
1550 int (*apm_init) (struct il_priv *il);
1551
1552 /* tx power */
1553 int (*send_tx_power) (struct il_priv *il);
1554 void (*update_chain_flags) (struct il_priv *il);
1555
1556 /* eeprom operations */
1557 int (*eeprom_acquire_semaphore) (struct il_priv *il);
1558 void (*eeprom_release_semaphore) (struct il_priv *il);
1559
1560 int (*rxon_assoc) (struct il_priv *il);
1561 int (*commit_rxon) (struct il_priv *il);
1562 void (*set_rxon_chain) (struct il_priv *il);
1563
1564 u16(*get_hcmd_size) (u8 cmd_id, u16 len);
1565 u16(*build_addsta_hcmd) (const struct il_addsta_cmd *cmd, u8 *data);
1566
1567 int (*request_scan) (struct il_priv *il, struct ieee80211_vif *vif);
1568 void (*post_scan) (struct il_priv *il);
1569 void (*post_associate) (struct il_priv *il);
1570 void (*config_ap) (struct il_priv *il);
1571 /* station management */
1572 int (*update_bcast_stations) (struct il_priv *il);
1573 int (*manage_ibss_station) (struct il_priv *il,
1574 struct ieee80211_vif *vif, bool add);
1575
1576 int (*send_led_cmd) (struct il_priv *il, struct il_led_cmd *led_cmd);
1577 };
1578
1579 struct il_mod_params {
1580 int sw_crypto; /* def: 0 = using hardware encryption */
1581 int disable_hw_scan; /* def: 0 = use h/w scan */
1582 int num_of_queues; /* def: HW dependent */
1583 int disable_11n; /* def: 0 = 11n capabilities enabled */
1584 int amsdu_size_8K; /* def: 0 = disable 8K amsdu size */
1585 int antenna; /* def: 0 = both antennas (use diversity) */
1586 int restart_fw; /* def: 1 = restart firmware */
1587 };
1588
1589 #define IL_LED_SOLID 11
1590 #define IL_DEF_LED_INTRVL cpu_to_le32(1000)
1591
1592 #define IL_LED_ACTIVITY (0<<1)
1593 #define IL_LED_LINK (1<<1)
1594
1595 /*
1596 * LED mode
1597 * IL_LED_DEFAULT: use device default
1598 * IL_LED_RF_STATE: turn LED on/off based on RF state
1599 * LED ON = RF ON
1600 * LED OFF = RF OFF
1601 * IL_LED_BLINK: adjust led blink rate based on blink table
1602 */
1603 enum il_led_mode {
1604 IL_LED_DEFAULT,
1605 IL_LED_RF_STATE,
1606 IL_LED_BLINK,
1607 };
1608
1609 void il_leds_init(struct il_priv *il);
1610 void il_leds_exit(struct il_priv *il);
1611
1612 /**
1613 * struct il_cfg
1614 * @fw_name_pre: Firmware filename prefix. The api version and extension
1615 * (.ucode) will be added to filename before loading from disk. The
1616 * filename is constructed as fw_name_pre<api>.ucode.
1617 * @ucode_api_max: Highest version of uCode API supported by driver.
1618 * @ucode_api_min: Lowest version of uCode API supported by driver.
1619 * @scan_antennas: available antenna for scan operation
1620 * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
1621 *
1622 * We enable the driver to be backward compatible wrt API version. The
1623 * driver specifies which APIs it supports (with @ucode_api_max being the
1624 * highest and @ucode_api_min the lowest). Firmware will only be loaded if
1625 * it has a supported API version. The firmware's API version will be
1626 * stored in @il_priv, enabling the driver to make runtime changes based
1627 * on firmware version used.
1628 *
1629 * For example,
1630 * if (IL_UCODE_API(il->ucode_ver) >= 2) {
1631 * Driver interacts with Firmware API version >= 2.
1632 * } else {
1633 * Driver interacts with Firmware API version 1.
1634 * }
1635 *
1636 * The ideal usage of this infrastructure is to treat a new ucode API
1637 * release as a new hardware revision. That is, through utilizing the
1638 * il_hcmd_utils_ops etc. we accommodate different command structures
1639 * and flows between hardware versions as well as their API
1640 * versions.
1641 *
1642 */
1643 struct il_cfg {
1644 /* params specific to an individual device within a device family */
1645 const char *name;
1646 const char *fw_name_pre;
1647 const unsigned int ucode_api_max;
1648 const unsigned int ucode_api_min;
1649 u8 valid_tx_ant;
1650 u8 valid_rx_ant;
1651 unsigned int sku;
1652 u16 eeprom_ver;
1653 u16 eeprom_calib_ver;
1654 /* module based parameters which can be set from modprobe cmd */
1655 const struct il_mod_params *mod_params;
1656 /* params not likely to change within a device family */
1657 struct il_base_params *base_params;
1658 /* params likely to change within a device family */
1659 u8 scan_rx_antennas[NUM_NL80211_BANDS];
1660 enum il_led_mode led_mode;
1661
1662 int eeprom_size;
1663 int num_of_queues; /* def: HW dependent */
1664 int num_of_ampdu_queues; /* def: HW dependent */
1665 /* for il_apm_init() */
1666 u32 pll_cfg_val;
1667 bool set_l0s;
1668 bool use_bsm;
1669
1670 u16 led_compensation;
1671 int chain_noise_num_beacons;
1672 unsigned int wd_timeout;
1673 bool temperature_kelvin;
1674 const bool ucode_tracing;
1675 const bool sensitivity_calib_by_driver;
1676 const bool chain_noise_calib_by_driver;
1677
1678 const u32 regulatory_bands[7];
1679 };
1680
1681 /***************************
1682 * L i b *
1683 ***************************/
1684
1685 int il_mac_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1686 unsigned int link_id, u16 queue,
1687 const struct ieee80211_tx_queue_params *params);
1688 int il_mac_tx_last_beacon(struct ieee80211_hw *hw);
1689
1690 void il_set_rxon_hwcrypto(struct il_priv *il, int hw_decrypt);
1691 int il_check_rxon_cmd(struct il_priv *il);
1692 int il_full_rxon_required(struct il_priv *il);
1693 int il_set_rxon_channel(struct il_priv *il, struct ieee80211_channel *ch);
1694 void il_set_flags_for_band(struct il_priv *il, enum nl80211_band band,
1695 struct ieee80211_vif *vif);
1696 u8 il_get_single_channel_number(struct il_priv *il, enum nl80211_band band);
1697 void il_set_rxon_ht(struct il_priv *il, struct il_ht_config *ht_conf);
1698 bool il_is_ht40_tx_allowed(struct il_priv *il,
1699 struct ieee80211_sta_ht_cap *ht_cap);
1700 void il_connection_init_rx_config(struct il_priv *il);
1701 void il_set_rate(struct il_priv *il);
1702 int il_set_decrypted_flag(struct il_priv *il, struct ieee80211_hdr *hdr,
1703 u32 decrypt_res, struct ieee80211_rx_status *stats);
1704 void il_irq_handle_error(struct il_priv *il);
1705 int il_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
1706 void il_mac_remove_interface(struct ieee80211_hw *hw,
1707 struct ieee80211_vif *vif);
1708 int il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1709 enum nl80211_iftype newtype, bool newp2p);
1710 void il_mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1711 u32 queues, bool drop);
1712 int il_alloc_txq_mem(struct il_priv *il);
1713 void il_free_txq_mem(struct il_priv *il);
1714
1715 #ifdef CONFIG_IWLEGACY_DEBUGFS
1716 void il_update_stats(struct il_priv *il, bool is_tx, __le16 fc, u16 len);
1717 #else
1718 static inline void
il_update_stats(struct il_priv * il,bool is_tx,__le16 fc,u16 len)1719 il_update_stats(struct il_priv *il, bool is_tx, __le16 fc, u16 len)
1720 {
1721 }
1722 #endif
1723
1724 /*****************************************************
1725 * Handlers
1726 ***************************************************/
1727 void il_hdl_pm_sleep(struct il_priv *il, struct il_rx_buf *rxb);
1728 void il_hdl_pm_debug_stats(struct il_priv *il, struct il_rx_buf *rxb);
1729 void il_hdl_error(struct il_priv *il, struct il_rx_buf *rxb);
1730 void il_hdl_csa(struct il_priv *il, struct il_rx_buf *rxb);
1731
1732 /*****************************************************
1733 * RX
1734 ******************************************************/
1735 void il_cmd_queue_unmap(struct il_priv *il);
1736 void il_cmd_queue_free(struct il_priv *il);
1737 int il_rx_queue_alloc(struct il_priv *il);
1738 void il_rx_queue_update_write_ptr(struct il_priv *il, struct il_rx_queue *q);
1739 int il_rx_queue_space(const struct il_rx_queue *q);
1740 void il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb);
1741
1742 void il_hdl_spectrum_measurement(struct il_priv *il, struct il_rx_buf *rxb);
1743 void il_recover_from_stats(struct il_priv *il, struct il_rx_pkt *pkt);
1744 void il_chswitch_done(struct il_priv *il, bool is_success);
1745
1746 /*****************************************************
1747 * TX
1748 ******************************************************/
1749 void il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq);
1750 int il_tx_queue_init(struct il_priv *il, u32 txq_id);
1751 void il_tx_queue_reset(struct il_priv *il, u32 txq_id);
1752 void il_tx_queue_unmap(struct il_priv *il, int txq_id);
1753 void il_tx_queue_free(struct il_priv *il, int txq_id);
1754 void il_setup_watchdog(struct il_priv *il);
1755 /*****************************************************
1756 * TX power
1757 ****************************************************/
1758 int il_set_tx_power(struct il_priv *il, s8 tx_power, bool force);
1759
1760 /*******************************************************************************
1761 * Rate
1762 ******************************************************************************/
1763
1764 u8 il_get_lowest_plcp(struct il_priv *il);
1765
1766 /*******************************************************************************
1767 * Scanning
1768 ******************************************************************************/
1769 void il_init_scan_params(struct il_priv *il);
1770 int il_scan_cancel(struct il_priv *il);
1771 int il_scan_cancel_timeout(struct il_priv *il, unsigned long ms);
1772 void il_force_scan_end(struct il_priv *il);
1773 int il_mac_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1774 struct ieee80211_scan_request *hw_req);
1775 void il_internal_short_hw_scan(struct il_priv *il);
1776 int il_force_reset(struct il_priv *il, bool external);
1777 u16 il_fill_probe_req(struct il_priv *il, struct ieee80211_mgmt *frame,
1778 const u8 *ta, const u8 *ie, int ie_len, int left);
1779 void il_setup_rx_scan_handlers(struct il_priv *il);
1780 u16 il_get_active_dwell_time(struct il_priv *il, enum nl80211_band band,
1781 u8 n_probes);
1782 u16 il_get_passive_dwell_time(struct il_priv *il, enum nl80211_band band,
1783 struct ieee80211_vif *vif);
1784 void il_setup_scan_deferred_work(struct il_priv *il);
1785 void il_cancel_scan_deferred_work(struct il_priv *il);
1786
1787 /* For faster active scanning, scan will move to the next channel if fewer than
1788 * PLCP_QUIET_THRESH packets are heard on this channel within
1789 * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
1790 * time if it's a quiet channel (nothing responded to our probe, and there's
1791 * no other traffic).
1792 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
1793 #define IL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */
1794 #define IL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */
1795
1796 #define IL_SCAN_CHECK_WATCHDOG (HZ * 7)
1797
1798 /*****************************************************
1799 * S e n d i n g H o s t C o m m a n d s *
1800 *****************************************************/
1801
1802 const char *il_get_cmd_string(u8 cmd);
1803 int __must_check il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd);
1804 int il_send_cmd(struct il_priv *il, struct il_host_cmd *cmd);
1805 int __must_check il_send_cmd_pdu(struct il_priv *il, u8 id, u16 len,
1806 const void *data);
1807 int il_send_cmd_pdu_async(struct il_priv *il, u8 id, u16 len, const void *data,
1808 void (*callback) (struct il_priv *il,
1809 struct il_device_cmd *cmd,
1810 struct il_rx_pkt *pkt));
1811
1812 int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd);
1813
1814 /*****************************************************
1815 * PCI *
1816 *****************************************************/
1817
1818 void il_bg_watchdog(struct timer_list *t);
1819 u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval);
1820 __le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon,
1821 u32 beacon_interval);
1822
1823 #ifdef CONFIG_PM_SLEEP
1824 extern const struct dev_pm_ops il_pm_ops;
1825
1826 #define IL_LEGACY_PM_OPS (&il_pm_ops)
1827
1828 #else /* !CONFIG_PM_SLEEP */
1829
1830 #define IL_LEGACY_PM_OPS NULL
1831
1832 #endif /* !CONFIG_PM_SLEEP */
1833
1834 /*****************************************************
1835 * Error Handling Debugging
1836 ******************************************************/
1837 void il4965_dump_nic_error_log(struct il_priv *il);
1838 #ifdef CONFIG_IWLEGACY_DEBUG
1839 void il_print_rx_config_cmd(struct il_priv *il);
1840 #else
1841 static inline void
il_print_rx_config_cmd(struct il_priv * il)1842 il_print_rx_config_cmd(struct il_priv *il)
1843 {
1844 }
1845 #endif
1846
1847 void il_clear_isr_stats(struct il_priv *il);
1848
1849 /*****************************************************
1850 * GEOS
1851 ******************************************************/
1852 int il_init_geos(struct il_priv *il);
1853 void il_free_geos(struct il_priv *il);
1854
1855 /*************** DRIVER STATUS FUNCTIONS *****/
1856
1857 #define S_HCMD_ACTIVE 0 /* host command in progress */
1858 /* 1 is unused (used to be S_HCMD_SYNC_ACTIVE) */
1859 #define S_INT_ENABLED 2
1860 #define S_RFKILL 3
1861 #define S_CT_KILL 4
1862 #define S_INIT 5
1863 #define S_ALIVE 6
1864 #define S_READY 7
1865 #define S_TEMPERATURE 8
1866 #define S_GEO_CONFIGURED 9
1867 #define S_EXIT_PENDING 10
1868 #define S_STATS 12
1869 #define S_SCANNING 13
1870 #define S_SCAN_ABORTING 14
1871 #define S_SCAN_HW 15
1872 #define S_POWER_PMI 16
1873 #define S_FW_ERROR 17
1874 #define S_CHANNEL_SWITCH_PENDING 18
1875
1876 static inline int
il_is_ready(struct il_priv * il)1877 il_is_ready(struct il_priv *il)
1878 {
1879 /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
1880 * set but EXIT_PENDING is not */
1881 return test_bit(S_READY, &il->status) &&
1882 test_bit(S_GEO_CONFIGURED, &il->status) &&
1883 !test_bit(S_EXIT_PENDING, &il->status);
1884 }
1885
1886 static inline int
il_is_alive(struct il_priv * il)1887 il_is_alive(struct il_priv *il)
1888 {
1889 return test_bit(S_ALIVE, &il->status);
1890 }
1891
1892 static inline int
il_is_init(struct il_priv * il)1893 il_is_init(struct il_priv *il)
1894 {
1895 return test_bit(S_INIT, &il->status);
1896 }
1897
1898 static inline int
il_is_rfkill(struct il_priv * il)1899 il_is_rfkill(struct il_priv *il)
1900 {
1901 return test_bit(S_RFKILL, &il->status);
1902 }
1903
1904 static inline int
il_is_ctkill(struct il_priv * il)1905 il_is_ctkill(struct il_priv *il)
1906 {
1907 return test_bit(S_CT_KILL, &il->status);
1908 }
1909
1910 static inline int
il_is_ready_rf(struct il_priv * il)1911 il_is_ready_rf(struct il_priv *il)
1912 {
1913
1914 if (il_is_rfkill(il))
1915 return 0;
1916
1917 return il_is_ready(il);
1918 }
1919
1920 void il_send_bt_config(struct il_priv *il);
1921 int il_send_stats_request(struct il_priv *il, u8 flags, bool clear);
1922 void il_apm_stop(struct il_priv *il);
1923 void _il_apm_stop(struct il_priv *il);
1924
1925 int il_apm_init(struct il_priv *il);
1926
1927 int il_send_rxon_timing(struct il_priv *il);
1928
1929 static inline int
il_send_rxon_assoc(struct il_priv * il)1930 il_send_rxon_assoc(struct il_priv *il)
1931 {
1932 return il->ops->rxon_assoc(il);
1933 }
1934
1935 static inline int
il_commit_rxon(struct il_priv * il)1936 il_commit_rxon(struct il_priv *il)
1937 {
1938 return il->ops->commit_rxon(il);
1939 }
1940
1941 static inline const struct ieee80211_supported_band *
il_get_hw_mode(struct il_priv * il,enum nl80211_band band)1942 il_get_hw_mode(struct il_priv *il, enum nl80211_band band)
1943 {
1944 return il->hw->wiphy->bands[band];
1945 }
1946
1947 /* mac80211 handlers */
1948 int il_mac_config(struct ieee80211_hw *hw, u32 changed);
1949 void il_mac_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
1950 void il_mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1951 struct ieee80211_bss_conf *bss_conf, u64 changes);
1952 void il_tx_cmd_protection(struct il_priv *il, struct ieee80211_tx_info *info,
1953 __le16 fc, __le32 *tx_flags);
1954
1955 irqreturn_t il_isr(int irq, void *data);
1956
1957 void il_set_bit(struct il_priv *p, u32 r, u32 m);
1958 void il_clear_bit(struct il_priv *p, u32 r, u32 m);
1959 bool _il_grab_nic_access(struct il_priv *il);
1960 int _il_poll_bit(struct il_priv *il, u32 addr, u32 bits, u32 mask, int timeout);
1961 int il_poll_bit(struct il_priv *il, u32 addr, u32 mask, int timeout);
1962 u32 il_rd_prph(struct il_priv *il, u32 reg);
1963 void il_wr_prph(struct il_priv *il, u32 addr, u32 val);
1964 u32 il_read_targ_mem(struct il_priv *il, u32 addr);
1965 void il_write_targ_mem(struct il_priv *il, u32 addr, u32 val);
1966
il_need_reclaim(struct il_priv * il,struct il_rx_pkt * pkt)1967 static inline bool il_need_reclaim(struct il_priv *il, struct il_rx_pkt *pkt)
1968 {
1969 /* Reclaim a command buffer only if this packet is a response
1970 * to a (driver-originated) command. If the packet (e.g. Rx frame)
1971 * originated from uCode, there is no command buffer to reclaim.
1972 * Ucode should set SEQ_RX_FRAME bit if ucode-originated, but
1973 * apparently a few don't get set; catch them here.
1974 */
1975 return !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
1976 pkt->hdr.cmd != N_STATS && pkt->hdr.cmd != C_TX &&
1977 pkt->hdr.cmd != N_RX_PHY && pkt->hdr.cmd != N_RX &&
1978 pkt->hdr.cmd != N_RX_MPDU && pkt->hdr.cmd != N_COMPRESSED_BA;
1979 }
1980
1981 static inline void
_il_write8(struct il_priv * il,u32 ofs,u8 val)1982 _il_write8(struct il_priv *il, u32 ofs, u8 val)
1983 {
1984 writeb(val, il->hw_base + ofs);
1985 }
1986 #define il_write8(il, ofs, val) _il_write8(il, ofs, val)
1987
1988 static inline void
_il_wr(struct il_priv * il,u32 ofs,u32 val)1989 _il_wr(struct il_priv *il, u32 ofs, u32 val)
1990 {
1991 writel(val, il->hw_base + ofs);
1992 }
1993
1994 static inline u32
_il_rd(struct il_priv * il,u32 ofs)1995 _il_rd(struct il_priv *il, u32 ofs)
1996 {
1997 return readl(il->hw_base + ofs);
1998 }
1999
2000 static inline void
_il_clear_bit(struct il_priv * il,u32 reg,u32 mask)2001 _il_clear_bit(struct il_priv *il, u32 reg, u32 mask)
2002 {
2003 _il_wr(il, reg, _il_rd(il, reg) & ~mask);
2004 }
2005
2006 static inline void
_il_set_bit(struct il_priv * il,u32 reg,u32 mask)2007 _il_set_bit(struct il_priv *il, u32 reg, u32 mask)
2008 {
2009 _il_wr(il, reg, _il_rd(il, reg) | mask);
2010 }
2011
2012 static inline void
_il_release_nic_access(struct il_priv * il)2013 _il_release_nic_access(struct il_priv *il)
2014 {
2015 _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
2016 }
2017
2018 static inline u32
il_rd(struct il_priv * il,u32 reg)2019 il_rd(struct il_priv *il, u32 reg)
2020 {
2021 u32 value;
2022 unsigned long reg_flags;
2023
2024 spin_lock_irqsave(&il->reg_lock, reg_flags);
2025 _il_grab_nic_access(il);
2026 value = _il_rd(il, reg);
2027 _il_release_nic_access(il);
2028 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2029 return value;
2030 }
2031
2032 static inline void
il_wr(struct il_priv * il,u32 reg,u32 value)2033 il_wr(struct il_priv *il, u32 reg, u32 value)
2034 {
2035 unsigned long reg_flags;
2036
2037 spin_lock_irqsave(&il->reg_lock, reg_flags);
2038 if (likely(_il_grab_nic_access(il))) {
2039 _il_wr(il, reg, value);
2040 _il_release_nic_access(il);
2041 }
2042 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2043 }
2044
2045 static inline u32
_il_rd_prph(struct il_priv * il,u32 reg)2046 _il_rd_prph(struct il_priv *il, u32 reg)
2047 {
2048 _il_wr(il, HBUS_TARG_PRPH_RADDR, reg | (3 << 24));
2049 return _il_rd(il, HBUS_TARG_PRPH_RDAT);
2050 }
2051
2052 static inline void
_il_wr_prph(struct il_priv * il,u32 addr,u32 val)2053 _il_wr_prph(struct il_priv *il, u32 addr, u32 val)
2054 {
2055 _il_wr(il, HBUS_TARG_PRPH_WADDR, ((addr & 0x0000FFFF) | (3 << 24)));
2056 _il_wr(il, HBUS_TARG_PRPH_WDAT, val);
2057 }
2058
2059 static inline void
il_set_bits_prph(struct il_priv * il,u32 reg,u32 mask)2060 il_set_bits_prph(struct il_priv *il, u32 reg, u32 mask)
2061 {
2062 unsigned long reg_flags;
2063
2064 spin_lock_irqsave(&il->reg_lock, reg_flags);
2065 if (likely(_il_grab_nic_access(il))) {
2066 _il_wr_prph(il, reg, (_il_rd_prph(il, reg) | mask));
2067 _il_release_nic_access(il);
2068 }
2069 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2070 }
2071
2072 static inline void
il_set_bits_mask_prph(struct il_priv * il,u32 reg,u32 bits,u32 mask)2073 il_set_bits_mask_prph(struct il_priv *il, u32 reg, u32 bits, u32 mask)
2074 {
2075 unsigned long reg_flags;
2076
2077 spin_lock_irqsave(&il->reg_lock, reg_flags);
2078 if (likely(_il_grab_nic_access(il))) {
2079 _il_wr_prph(il, reg, ((_il_rd_prph(il, reg) & mask) | bits));
2080 _il_release_nic_access(il);
2081 }
2082 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2083 }
2084
2085 static inline void
il_clear_bits_prph(struct il_priv * il,u32 reg,u32 mask)2086 il_clear_bits_prph(struct il_priv *il, u32 reg, u32 mask)
2087 {
2088 unsigned long reg_flags;
2089 u32 val;
2090
2091 spin_lock_irqsave(&il->reg_lock, reg_flags);
2092 if (likely(_il_grab_nic_access(il))) {
2093 val = _il_rd_prph(il, reg);
2094 _il_wr_prph(il, reg, (val & ~mask));
2095 _il_release_nic_access(il);
2096 }
2097 spin_unlock_irqrestore(&il->reg_lock, reg_flags);
2098 }
2099
2100 #define HW_KEY_DYNAMIC 0
2101 #define HW_KEY_DEFAULT 1
2102
2103 #define IL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */
2104 #define IL_STA_UCODE_ACTIVE BIT(1) /* ucode entry is active */
2105 #define IL_STA_UCODE_INPROGRESS BIT(2) /* ucode entry is in process of
2106 being activated */
2107 #define IL_STA_LOCAL BIT(3) /* station state not directed by mac80211;
2108 (this is for the IBSS BSSID stations) */
2109 #define IL_STA_BCAST BIT(4) /* this station is the special bcast station */
2110
2111 void il_restore_stations(struct il_priv *il);
2112 void il_clear_ucode_stations(struct il_priv *il);
2113 void il_dealloc_bcast_stations(struct il_priv *il);
2114 int il_get_free_ucode_key_idx(struct il_priv *il);
2115 int il_send_add_sta(struct il_priv *il, struct il_addsta_cmd *sta, u8 flags);
2116 int il_add_station_common(struct il_priv *il, const u8 *addr, bool is_ap,
2117 struct ieee80211_sta *sta, u8 *sta_id_r);
2118 int il_remove_station(struct il_priv *il, const u8 sta_id, const u8 * addr);
2119 int il_mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
2120 struct ieee80211_sta *sta);
2121
2122 u8 il_prep_station(struct il_priv *il, const u8 *addr, bool is_ap,
2123 struct ieee80211_sta *sta);
2124
2125 int il_send_lq_cmd(struct il_priv *il, struct il_link_quality_cmd *lq,
2126 u8 flags, bool init);
2127
2128 /**
2129 * il_clear_driver_stations - clear knowledge of all stations from driver
2130 * @il: iwl il struct
2131 *
2132 * This is called during il_down() to make sure that in the case
2133 * we're coming there from a hardware restart mac80211 will be
2134 * able to reconfigure stations -- if we're getting there in the
2135 * normal down flow then the stations will already be cleared.
2136 */
2137 static inline void
il_clear_driver_stations(struct il_priv * il)2138 il_clear_driver_stations(struct il_priv *il)
2139 {
2140 unsigned long flags;
2141
2142 spin_lock_irqsave(&il->sta_lock, flags);
2143 memset(il->stations, 0, sizeof(il->stations));
2144 il->num_stations = 0;
2145 il->ucode_key_table = 0;
2146 spin_unlock_irqrestore(&il->sta_lock, flags);
2147 }
2148
2149 static inline int
il_sta_id(struct ieee80211_sta * sta)2150 il_sta_id(struct ieee80211_sta *sta)
2151 {
2152 if (WARN_ON(!sta))
2153 return IL_INVALID_STATION;
2154
2155 return ((struct il_station_priv_common *)sta->drv_priv)->sta_id;
2156 }
2157
2158 /**
2159 * il_sta_id_or_broadcast - return sta_id or broadcast sta
2160 * @il: iwl il
2161 * @context: the current context
2162 * @sta: mac80211 station
2163 *
2164 * In certain circumstances mac80211 passes a station pointer
2165 * that may be %NULL, for example during TX or key setup. In
2166 * that case, we need to use the broadcast station, so this
2167 * inline wraps that pattern.
2168 */
2169 static inline int
il_sta_id_or_broadcast(struct il_priv * il,struct ieee80211_sta * sta)2170 il_sta_id_or_broadcast(struct il_priv *il, struct ieee80211_sta *sta)
2171 {
2172 int sta_id;
2173
2174 if (!sta)
2175 return il->hw_params.bcast_id;
2176
2177 sta_id = il_sta_id(sta);
2178
2179 /*
2180 * mac80211 should not be passing a partially
2181 * initialised station!
2182 */
2183 WARN_ON(sta_id == IL_INVALID_STATION);
2184
2185 return sta_id;
2186 }
2187
2188 /**
2189 * il_queue_inc_wrap - increment queue idx, wrap back to beginning
2190 * @idx -- current idx
2191 * @n_bd -- total number of entries in queue (must be power of 2)
2192 */
2193 static inline int
il_queue_inc_wrap(int idx,int n_bd)2194 il_queue_inc_wrap(int idx, int n_bd)
2195 {
2196 return ++idx & (n_bd - 1);
2197 }
2198
2199 /**
2200 * il_queue_dec_wrap - decrement queue idx, wrap back to end
2201 * @idx -- current idx
2202 * @n_bd -- total number of entries in queue (must be power of 2)
2203 */
2204 static inline int
il_queue_dec_wrap(int idx,int n_bd)2205 il_queue_dec_wrap(int idx, int n_bd)
2206 {
2207 return --idx & (n_bd - 1);
2208 }
2209
2210 /* TODO: Move fw_desc functions to iwl-pci.ko */
2211 static inline void
il_free_fw_desc(struct pci_dev * pci_dev,struct fw_desc * desc)2212 il_free_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc)
2213 {
2214 if (desc->v_addr)
2215 dma_free_coherent(&pci_dev->dev, desc->len, desc->v_addr,
2216 desc->p_addr);
2217 desc->v_addr = NULL;
2218 desc->len = 0;
2219 }
2220
2221 static inline int
il_alloc_fw_desc(struct pci_dev * pci_dev,struct fw_desc * desc)2222 il_alloc_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc)
2223 {
2224 if (!desc->len) {
2225 desc->v_addr = NULL;
2226 return -EINVAL;
2227 }
2228
2229 desc->v_addr = dma_alloc_coherent(&pci_dev->dev, desc->len,
2230 &desc->p_addr, GFP_KERNEL);
2231 return (desc->v_addr != NULL) ? 0 : -ENOMEM;
2232 }
2233
2234 /*
2235 * we have 8 bits used like this:
2236 *
2237 * 7 6 5 4 3 2 1 0
2238 * | | | | | | | |
2239 * | | | | | | +-+-------- AC queue (0-3)
2240 * | | | | | |
2241 * | +-+-+-+-+------------ HW queue ID
2242 * |
2243 * +---------------------- unused
2244 */
2245 static inline void
il_set_swq_id(struct il_tx_queue * txq,u8 ac,u8 hwq)2246 il_set_swq_id(struct il_tx_queue *txq, u8 ac, u8 hwq)
2247 {
2248 BUG_ON(ac > 3); /* only have 2 bits */
2249 BUG_ON(hwq > 31); /* only use 5 bits */
2250
2251 txq->swq_id = (hwq << 2) | ac;
2252 }
2253
2254 static inline void
_il_wake_queue(struct il_priv * il,u8 ac)2255 _il_wake_queue(struct il_priv *il, u8 ac)
2256 {
2257 if (atomic_dec_return(&il->queue_stop_count[ac]) <= 0)
2258 ieee80211_wake_queue(il->hw, ac);
2259 }
2260
2261 static inline void
_il_stop_queue(struct il_priv * il,u8 ac)2262 _il_stop_queue(struct il_priv *il, u8 ac)
2263 {
2264 if (atomic_inc_return(&il->queue_stop_count[ac]) > 0)
2265 ieee80211_stop_queue(il->hw, ac);
2266 }
2267 static inline void
il_wake_queue(struct il_priv * il,struct il_tx_queue * txq)2268 il_wake_queue(struct il_priv *il, struct il_tx_queue *txq)
2269 {
2270 u8 queue = txq->swq_id;
2271 u8 ac = queue & 3;
2272 u8 hwq = (queue >> 2) & 0x1f;
2273
2274 if (test_and_clear_bit(hwq, il->queue_stopped))
2275 _il_wake_queue(il, ac);
2276 }
2277
2278 static inline void
il_stop_queue(struct il_priv * il,struct il_tx_queue * txq)2279 il_stop_queue(struct il_priv *il, struct il_tx_queue *txq)
2280 {
2281 u8 queue = txq->swq_id;
2282 u8 ac = queue & 3;
2283 u8 hwq = (queue >> 2) & 0x1f;
2284
2285 if (!test_and_set_bit(hwq, il->queue_stopped))
2286 _il_stop_queue(il, ac);
2287 }
2288
2289 static inline void
il_wake_queues_by_reason(struct il_priv * il,int reason)2290 il_wake_queues_by_reason(struct il_priv *il, int reason)
2291 {
2292 u8 ac;
2293
2294 if (test_and_clear_bit(reason, &il->stop_reason))
2295 for (ac = 0; ac < 4; ac++)
2296 _il_wake_queue(il, ac);
2297 }
2298
2299 static inline void
il_stop_queues_by_reason(struct il_priv * il,int reason)2300 il_stop_queues_by_reason(struct il_priv *il, int reason)
2301 {
2302 u8 ac;
2303
2304 if (!test_and_set_bit(reason, &il->stop_reason))
2305 for (ac = 0; ac < 4; ac++)
2306 _il_stop_queue(il, ac);
2307 }
2308
2309 #ifdef ieee80211_stop_queue
2310 #undef ieee80211_stop_queue
2311 #endif
2312
2313 #define ieee80211_stop_queue DO_NOT_USE_ieee80211_stop_queue
2314
2315 #ifdef ieee80211_wake_queue
2316 #undef ieee80211_wake_queue
2317 #endif
2318
2319 #define ieee80211_wake_queue DO_NOT_USE_ieee80211_wake_queue
2320
2321 static inline void
il_disable_interrupts(struct il_priv * il)2322 il_disable_interrupts(struct il_priv *il)
2323 {
2324 clear_bit(S_INT_ENABLED, &il->status);
2325
2326 /* disable interrupts from uCode/NIC to host */
2327 _il_wr(il, CSR_INT_MASK, 0x00000000);
2328
2329 /* acknowledge/clear/reset any interrupts still pending
2330 * from uCode or flow handler (Rx/Tx DMA) */
2331 _il_wr(il, CSR_INT, 0xffffffff);
2332 _il_wr(il, CSR_FH_INT_STATUS, 0xffffffff);
2333 }
2334
2335 static inline void
il_enable_rfkill_int(struct il_priv * il)2336 il_enable_rfkill_int(struct il_priv *il)
2337 {
2338 _il_wr(il, CSR_INT_MASK, CSR_INT_BIT_RF_KILL);
2339 }
2340
2341 static inline void
il_enable_interrupts(struct il_priv * il)2342 il_enable_interrupts(struct il_priv *il)
2343 {
2344 set_bit(S_INT_ENABLED, &il->status);
2345 _il_wr(il, CSR_INT_MASK, il->inta_mask);
2346 }
2347
2348 /**
2349 * il_beacon_time_mask_low - mask of lower 32 bit of beacon time
2350 * @il -- pointer to il_priv data structure
2351 * @tsf_bits -- number of bits need to shift for masking)
2352 */
2353 static inline u32
il_beacon_time_mask_low(struct il_priv * il,u16 tsf_bits)2354 il_beacon_time_mask_low(struct il_priv *il, u16 tsf_bits)
2355 {
2356 return (1 << tsf_bits) - 1;
2357 }
2358
2359 /**
2360 * il_beacon_time_mask_high - mask of higher 32 bit of beacon time
2361 * @il -- pointer to il_priv data structure
2362 * @tsf_bits -- number of bits need to shift for masking)
2363 */
2364 static inline u32
il_beacon_time_mask_high(struct il_priv * il,u16 tsf_bits)2365 il_beacon_time_mask_high(struct il_priv *il, u16 tsf_bits)
2366 {
2367 return ((1 << (32 - tsf_bits)) - 1) << tsf_bits;
2368 }
2369
2370 /**
2371 * struct il_rb_status - reseve buffer status host memory mapped FH registers
2372 *
2373 * @closed_rb_num [0:11] - Indicates the idx of the RB which was closed
2374 * @closed_fr_num [0:11] - Indicates the idx of the RX Frame which was closed
2375 * @finished_rb_num [0:11] - Indicates the idx of the current RB
2376 * in which the last frame was written to
2377 * @finished_fr_num [0:11] - Indicates the idx of the RX Frame
2378 * which was transferred
2379 */
2380 struct il_rb_status {
2381 __le16 closed_rb_num;
2382 __le16 closed_fr_num;
2383 __le16 finished_rb_num;
2384 __le16 finished_fr_nam;
2385 __le32 __unused; /* 3945 only */
2386 } __packed;
2387
2388 #define TFD_QUEUE_SIZE_MAX 256
2389 #define TFD_QUEUE_SIZE_BC_DUP 64
2390 #define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP)
2391 #define IL_TX_DMA_MASK DMA_BIT_MASK(36)
2392 #define IL_NUM_OF_TBS 20
2393
2394 static inline u8
il_get_dma_hi_addr(dma_addr_t addr)2395 il_get_dma_hi_addr(dma_addr_t addr)
2396 {
2397 return (sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0) & 0xF;
2398 }
2399
2400 /**
2401 * struct il_tfd_tb transmit buffer descriptor within transmit frame descriptor
2402 *
2403 * This structure contains dma address and length of transmission address
2404 *
2405 * @lo: low [31:0] portion of the dma address of TX buffer every even is
2406 * unaligned on 16 bit boundary
2407 * @hi_n_len: 0-3 [35:32] portion of dma
2408 * 4-15 length of the tx buffer
2409 */
2410 struct il_tfd_tb {
2411 __le32 lo;
2412 __le16 hi_n_len;
2413 } __packed;
2414
2415 /**
2416 * struct il_tfd
2417 *
2418 * Transmit Frame Descriptor (TFD)
2419 *
2420 * @ __reserved1[3] reserved
2421 * @ num_tbs 0-4 number of active tbs
2422 * 5 reserved
2423 * 6-7 padding (not used)
2424 * @ tbs[20] transmit frame buffer descriptors
2425 * @ __pad padding
2426 *
2427 * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM.
2428 * Both driver and device share these circular buffers, each of which must be
2429 * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes
2430 *
2431 * Driver must indicate the physical address of the base of each
2432 * circular buffer via the FH49_MEM_CBBC_QUEUE registers.
2433 *
2434 * Each TFD contains pointer/size information for up to 20 data buffers
2435 * in host DRAM. These buffers collectively contain the (one) frame described
2436 * by the TFD. Each buffer must be a single contiguous block of memory within
2437 * itself, but buffers may be scattered in host DRAM. Each buffer has max size
2438 * of (4K - 4). The concatenates all of a TFD's buffers into a single
2439 * Tx frame, up to 8 KBytes in size.
2440 *
2441 * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx.
2442 */
2443 struct il_tfd {
2444 u8 __reserved1[3];
2445 u8 num_tbs;
2446 struct il_tfd_tb tbs[IL_NUM_OF_TBS];
2447 __le32 __pad;
2448 } __packed;
2449 /* PCI registers */
2450 #define PCI_CFG_RETRY_TIMEOUT 0x041
2451
2452 struct il_rate_info {
2453 u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
2454 u8 plcp_siso; /* uCode API: RATE_SISO_6M_PLCP, etc. */
2455 u8 plcp_mimo2; /* uCode API: RATE_MIMO2_6M_PLCP, etc. */
2456 u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
2457 u8 prev_ieee; /* previous rate in IEEE speeds */
2458 u8 next_ieee; /* next rate in IEEE speeds */
2459 u8 prev_rs; /* previous rate used in rs algo */
2460 u8 next_rs; /* next rate used in rs algo */
2461 u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
2462 u8 next_rs_tgg; /* next rate used in TGG rs algo */
2463 };
2464
2465 struct il3945_rate_info {
2466 u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
2467 u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
2468 u8 prev_ieee; /* previous rate in IEEE speeds */
2469 u8 next_ieee; /* next rate in IEEE speeds */
2470 u8 prev_rs; /* previous rate used in rs algo */
2471 u8 next_rs; /* next rate used in rs algo */
2472 u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
2473 u8 next_rs_tgg; /* next rate used in TGG rs algo */
2474 u8 table_rs_idx; /* idx in rate scale table cmd */
2475 u8 prev_table_rs; /* prev in rate table cmd */
2476 };
2477
2478 /*
2479 * These serve as idxes into
2480 * struct il_rate_info il_rates[RATE_COUNT];
2481 */
2482 enum {
2483 RATE_1M_IDX = 0,
2484 RATE_2M_IDX,
2485 RATE_5M_IDX,
2486 RATE_11M_IDX,
2487 RATE_6M_IDX,
2488 RATE_9M_IDX,
2489 RATE_12M_IDX,
2490 RATE_18M_IDX,
2491 RATE_24M_IDX,
2492 RATE_36M_IDX,
2493 RATE_48M_IDX,
2494 RATE_54M_IDX,
2495 RATE_60M_IDX,
2496 RATE_COUNT,
2497 RATE_COUNT_LEGACY = RATE_COUNT - 1, /* Excluding 60M */
2498 RATE_COUNT_3945 = RATE_COUNT - 1,
2499 RATE_INVM_IDX = RATE_COUNT,
2500 RATE_INVALID = RATE_COUNT,
2501 };
2502
2503 enum {
2504 RATE_6M_IDX_TBL = 0,
2505 RATE_9M_IDX_TBL,
2506 RATE_12M_IDX_TBL,
2507 RATE_18M_IDX_TBL,
2508 RATE_24M_IDX_TBL,
2509 RATE_36M_IDX_TBL,
2510 RATE_48M_IDX_TBL,
2511 RATE_54M_IDX_TBL,
2512 RATE_1M_IDX_TBL,
2513 RATE_2M_IDX_TBL,
2514 RATE_5M_IDX_TBL,
2515 RATE_11M_IDX_TBL,
2516 RATE_INVM_IDX_TBL = RATE_INVM_IDX - 1,
2517 };
2518
2519 enum {
2520 IL_FIRST_OFDM_RATE = RATE_6M_IDX,
2521 IL39_LAST_OFDM_RATE = RATE_54M_IDX,
2522 IL_LAST_OFDM_RATE = RATE_60M_IDX,
2523 IL_FIRST_CCK_RATE = RATE_1M_IDX,
2524 IL_LAST_CCK_RATE = RATE_11M_IDX,
2525 };
2526
2527 /* #define vs. enum to keep from defaulting to 'large integer' */
2528 #define RATE_6M_MASK (1 << RATE_6M_IDX)
2529 #define RATE_9M_MASK (1 << RATE_9M_IDX)
2530 #define RATE_12M_MASK (1 << RATE_12M_IDX)
2531 #define RATE_18M_MASK (1 << RATE_18M_IDX)
2532 #define RATE_24M_MASK (1 << RATE_24M_IDX)
2533 #define RATE_36M_MASK (1 << RATE_36M_IDX)
2534 #define RATE_48M_MASK (1 << RATE_48M_IDX)
2535 #define RATE_54M_MASK (1 << RATE_54M_IDX)
2536 #define RATE_60M_MASK (1 << RATE_60M_IDX)
2537 #define RATE_1M_MASK (1 << RATE_1M_IDX)
2538 #define RATE_2M_MASK (1 << RATE_2M_IDX)
2539 #define RATE_5M_MASK (1 << RATE_5M_IDX)
2540 #define RATE_11M_MASK (1 << RATE_11M_IDX)
2541
2542 /* uCode API values for legacy bit rates, both OFDM and CCK */
2543 enum {
2544 RATE_6M_PLCP = 13,
2545 RATE_9M_PLCP = 15,
2546 RATE_12M_PLCP = 5,
2547 RATE_18M_PLCP = 7,
2548 RATE_24M_PLCP = 9,
2549 RATE_36M_PLCP = 11,
2550 RATE_48M_PLCP = 1,
2551 RATE_54M_PLCP = 3,
2552 RATE_60M_PLCP = 3, /*FIXME:RS:should be removed */
2553 RATE_1M_PLCP = 10,
2554 RATE_2M_PLCP = 20,
2555 RATE_5M_PLCP = 55,
2556 RATE_11M_PLCP = 110,
2557 /*FIXME:RS:add RATE_LEGACY_INVM_PLCP = 0, */
2558 };
2559
2560 /* uCode API values for OFDM high-throughput (HT) bit rates */
2561 enum {
2562 RATE_SISO_6M_PLCP = 0,
2563 RATE_SISO_12M_PLCP = 1,
2564 RATE_SISO_18M_PLCP = 2,
2565 RATE_SISO_24M_PLCP = 3,
2566 RATE_SISO_36M_PLCP = 4,
2567 RATE_SISO_48M_PLCP = 5,
2568 RATE_SISO_54M_PLCP = 6,
2569 RATE_SISO_60M_PLCP = 7,
2570 RATE_MIMO2_6M_PLCP = 0x8,
2571 RATE_MIMO2_12M_PLCP = 0x9,
2572 RATE_MIMO2_18M_PLCP = 0xa,
2573 RATE_MIMO2_24M_PLCP = 0xb,
2574 RATE_MIMO2_36M_PLCP = 0xc,
2575 RATE_MIMO2_48M_PLCP = 0xd,
2576 RATE_MIMO2_54M_PLCP = 0xe,
2577 RATE_MIMO2_60M_PLCP = 0xf,
2578 RATE_SISO_INVM_PLCP,
2579 RATE_MIMO2_INVM_PLCP = RATE_SISO_INVM_PLCP,
2580 };
2581
2582 /* MAC header values for bit rates */
2583 enum {
2584 RATE_6M_IEEE = 12,
2585 RATE_9M_IEEE = 18,
2586 RATE_12M_IEEE = 24,
2587 RATE_18M_IEEE = 36,
2588 RATE_24M_IEEE = 48,
2589 RATE_36M_IEEE = 72,
2590 RATE_48M_IEEE = 96,
2591 RATE_54M_IEEE = 108,
2592 RATE_60M_IEEE = 120,
2593 RATE_1M_IEEE = 2,
2594 RATE_2M_IEEE = 4,
2595 RATE_5M_IEEE = 11,
2596 RATE_11M_IEEE = 22,
2597 };
2598
2599 #define IL_CCK_BASIC_RATES_MASK \
2600 (RATE_1M_MASK | \
2601 RATE_2M_MASK)
2602
2603 #define IL_CCK_RATES_MASK \
2604 (IL_CCK_BASIC_RATES_MASK | \
2605 RATE_5M_MASK | \
2606 RATE_11M_MASK)
2607
2608 #define IL_OFDM_BASIC_RATES_MASK \
2609 (RATE_6M_MASK | \
2610 RATE_12M_MASK | \
2611 RATE_24M_MASK)
2612
2613 #define IL_OFDM_RATES_MASK \
2614 (IL_OFDM_BASIC_RATES_MASK | \
2615 RATE_9M_MASK | \
2616 RATE_18M_MASK | \
2617 RATE_36M_MASK | \
2618 RATE_48M_MASK | \
2619 RATE_54M_MASK)
2620
2621 #define IL_BASIC_RATES_MASK \
2622 (IL_OFDM_BASIC_RATES_MASK | \
2623 IL_CCK_BASIC_RATES_MASK)
2624
2625 #define RATES_MASK ((1 << RATE_COUNT) - 1)
2626 #define RATES_MASK_3945 ((1 << RATE_COUNT_3945) - 1)
2627
2628 #define IL_INVALID_VALUE -1
2629
2630 #define IL_MIN_RSSI_VAL -100
2631 #define IL_MAX_RSSI_VAL 0
2632
2633 /* These values specify how many Tx frame attempts before
2634 * searching for a new modulation mode */
2635 #define IL_LEGACY_FAILURE_LIMIT 160
2636 #define IL_LEGACY_SUCCESS_LIMIT 480
2637 #define IL_LEGACY_TBL_COUNT 160
2638
2639 #define IL_NONE_LEGACY_FAILURE_LIMIT 400
2640 #define IL_NONE_LEGACY_SUCCESS_LIMIT 4500
2641 #define IL_NONE_LEGACY_TBL_COUNT 1500
2642
2643 /* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
2644 #define IL_RS_GOOD_RATIO 12800 /* 100% */
2645 #define RATE_SCALE_SWITCH 10880 /* 85% */
2646 #define RATE_HIGH_TH 10880 /* 85% */
2647 #define RATE_INCREASE_TH 6400 /* 50% */
2648 #define RATE_DECREASE_TH 1920 /* 15% */
2649
2650 /* possible actions when in legacy mode */
2651 #define IL_LEGACY_SWITCH_ANTENNA1 0
2652 #define IL_LEGACY_SWITCH_ANTENNA2 1
2653 #define IL_LEGACY_SWITCH_SISO 2
2654 #define IL_LEGACY_SWITCH_MIMO2_AB 3
2655 #define IL_LEGACY_SWITCH_MIMO2_AC 4
2656 #define IL_LEGACY_SWITCH_MIMO2_BC 5
2657
2658 /* possible actions when in siso mode */
2659 #define IL_SISO_SWITCH_ANTENNA1 0
2660 #define IL_SISO_SWITCH_ANTENNA2 1
2661 #define IL_SISO_SWITCH_MIMO2_AB 2
2662 #define IL_SISO_SWITCH_MIMO2_AC 3
2663 #define IL_SISO_SWITCH_MIMO2_BC 4
2664 #define IL_SISO_SWITCH_GI 5
2665
2666 /* possible actions when in mimo mode */
2667 #define IL_MIMO2_SWITCH_ANTENNA1 0
2668 #define IL_MIMO2_SWITCH_ANTENNA2 1
2669 #define IL_MIMO2_SWITCH_SISO_A 2
2670 #define IL_MIMO2_SWITCH_SISO_B 3
2671 #define IL_MIMO2_SWITCH_SISO_C 4
2672 #define IL_MIMO2_SWITCH_GI 5
2673
2674 #define IL_MAX_SEARCH IL_MIMO2_SWITCH_GI
2675
2676 #define IL_ACTION_LIMIT 3 /* # possible actions */
2677
2678 #define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */
2679
2680 /* load per tid defines for A-MPDU activation */
2681 #define IL_AGG_TPT_THREHOLD 0
2682 #define IL_AGG_LOAD_THRESHOLD 10
2683 #define IL_AGG_ALL_TID 0xff
2684 #define TID_QUEUE_CELL_SPACING 50 /*mS */
2685 #define TID_QUEUE_MAX_SIZE 20
2686 #define TID_ROUND_VALUE 5 /* mS */
2687 #define TID_MAX_LOAD_COUNT 8
2688
2689 #define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
2690 #define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
2691
2692 extern const struct il_rate_info il_rates[RATE_COUNT];
2693
2694 enum il_table_type {
2695 LQ_NONE,
2696 LQ_G, /* legacy types */
2697 LQ_A,
2698 LQ_SISO, /* high-throughput types */
2699 LQ_MIMO2,
2700 LQ_MAX,
2701 };
2702
2703 #define is_legacy(tbl) ((tbl) == LQ_G || (tbl) == LQ_A)
2704 #define is_siso(tbl) ((tbl) == LQ_SISO)
2705 #define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
2706 #define is_mimo(tbl) (is_mimo2(tbl))
2707 #define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
2708 #define is_a_band(tbl) ((tbl) == LQ_A)
2709 #define is_g_and(tbl) ((tbl) == LQ_G)
2710
2711 #define ANT_NONE 0x0
2712 #define ANT_A BIT(0)
2713 #define ANT_B BIT(1)
2714 #define ANT_AB (ANT_A | ANT_B)
2715 #define ANT_C BIT(2)
2716 #define ANT_AC (ANT_A | ANT_C)
2717 #define ANT_BC (ANT_B | ANT_C)
2718 #define ANT_ABC (ANT_AB | ANT_C)
2719
2720 #define IL_MAX_MCS_DISPLAY_SIZE 12
2721
2722 struct il_rate_mcs_info {
2723 char mbps[IL_MAX_MCS_DISPLAY_SIZE];
2724 char mcs[IL_MAX_MCS_DISPLAY_SIZE];
2725 };
2726
2727 /**
2728 * struct il_rate_scale_data -- tx success history for one rate
2729 */
2730 struct il_rate_scale_data {
2731 u64 data; /* bitmap of successful frames */
2732 s32 success_counter; /* number of frames successful */
2733 s32 success_ratio; /* per-cent * 128 */
2734 s32 counter; /* number of frames attempted */
2735 s32 average_tpt; /* success ratio * expected throughput */
2736 unsigned long stamp;
2737 };
2738
2739 /**
2740 * struct il_scale_tbl_info -- tx params and success history for all rates
2741 *
2742 * There are two of these in struct il_lq_sta,
2743 * one for "active", and one for "search".
2744 */
2745 struct il_scale_tbl_info {
2746 enum il_table_type lq_type;
2747 u8 ant_type;
2748 u8 is_SGI; /* 1 = short guard interval */
2749 u8 is_ht40; /* 1 = 40 MHz channel width */
2750 u8 is_dup; /* 1 = duplicated data streams */
2751 u8 action; /* change modulation; IL_[LEGACY/SISO/MIMO]_SWITCH_* */
2752 u8 max_search; /* maximun number of tables we can search */
2753 s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */
2754 u32 current_rate; /* rate_n_flags, uCode API format */
2755 struct il_rate_scale_data win[RATE_COUNT]; /* rate histories */
2756 };
2757
2758 struct il_traffic_load {
2759 unsigned long time_stamp; /* age of the oldest stats */
2760 u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time
2761 * slice */
2762 u32 total; /* total num of packets during the
2763 * last TID_MAX_TIME_DIFF */
2764 u8 queue_count; /* number of queues that has
2765 * been used since the last cleanup */
2766 u8 head; /* start of the circular buffer */
2767 };
2768
2769 /**
2770 * struct il_lq_sta -- driver's rate scaling ilate structure
2771 *
2772 * Pointer to this gets passed back and forth between driver and mac80211.
2773 */
2774 struct il_lq_sta {
2775 u8 active_tbl; /* idx of active table, range 0-1 */
2776 u8 enable_counter; /* indicates HT mode */
2777 u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */
2778 u8 search_better_tbl; /* 1: currently trying alternate mode */
2779 s32 last_tpt;
2780
2781 /* The following determine when to search for a new mode */
2782 u32 table_count_limit;
2783 u32 max_failure_limit; /* # failed frames before new search */
2784 u32 max_success_limit; /* # successful frames before new search */
2785 u32 table_count;
2786 u32 total_failed; /* total failed frames, any/all rates */
2787 u32 total_success; /* total successful frames, any/all rates */
2788 u64 flush_timer; /* time staying in mode before new search */
2789
2790 u8 action_counter; /* # mode-switch actions tried */
2791 u8 is_green;
2792 u8 is_dup;
2793 enum nl80211_band band;
2794
2795 /* The following are bitmaps of rates; RATE_6M_MASK, etc. */
2796 u32 supp_rates;
2797 u16 active_legacy_rate;
2798 u16 active_siso_rate;
2799 u16 active_mimo2_rate;
2800 s8 max_rate_idx; /* Max rate set by user */
2801 u8 missed_rate_counter;
2802
2803 struct il_link_quality_cmd lq;
2804 struct il_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
2805 struct il_traffic_load load[TID_MAX_LOAD_COUNT];
2806 u8 tx_agg_tid_en;
2807 #ifdef CONFIG_MAC80211_DEBUGFS
2808 u32 dbg_fixed_rate;
2809 #endif
2810 struct il_priv *drv;
2811
2812 /* used to be in sta_info */
2813 int last_txrate_idx;
2814 /* last tx rate_n_flags */
2815 u32 last_rate_n_flags;
2816 /* packets destined for this STA are aggregated */
2817 u8 is_agg;
2818 };
2819
2820 /*
2821 * il_station_priv: Driver's ilate station information
2822 *
2823 * When mac80211 creates a station it reserves some space (hw->sta_data_size)
2824 * in the structure for use by driver. This structure is places in that
2825 * space.
2826 *
2827 * The common struct MUST be first because it is shared between
2828 * 3945 and 4965!
2829 */
2830 struct il_station_priv {
2831 struct il_station_priv_common common;
2832 struct il_lq_sta lq_sta;
2833 atomic_t pending_frames;
2834 bool client;
2835 bool asleep;
2836 };
2837
2838 static inline u8
il4965_num_of_ant(u8 m)2839 il4965_num_of_ant(u8 m)
2840 {
2841 return !!(m & ANT_A) + !!(m & ANT_B) + !!(m & ANT_C);
2842 }
2843
2844 static inline u8
il4965_first_antenna(u8 mask)2845 il4965_first_antenna(u8 mask)
2846 {
2847 if (mask & ANT_A)
2848 return ANT_A;
2849 if (mask & ANT_B)
2850 return ANT_B;
2851 return ANT_C;
2852 }
2853
2854 /**
2855 * il3945_rate_scale_init - Initialize the rate scale table based on assoc info
2856 *
2857 * The specific throughput table used is based on the type of network
2858 * the associated with, including A, B, G, and G w/ TGG protection
2859 */
2860 void il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
2861
2862 /* Initialize station's rate scaling information after adding station */
2863 void il4965_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta,
2864 u8 sta_id);
2865 void il3945_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta,
2866 u8 sta_id);
2867
2868 /**
2869 * il_rate_control_register - Register the rate control algorithm callbacks
2870 *
2871 * Since the rate control algorithm is hardware specific, there is no need
2872 * or reason to place it as a stand alone module. The driver can call
2873 * il_rate_control_register in order to register the rate control callbacks
2874 * with the mac80211 subsystem. This should be performed prior to calling
2875 * ieee80211_register_hw
2876 *
2877 */
2878 int il4965_rate_control_register(void);
2879 int il3945_rate_control_register(void);
2880
2881 /**
2882 * il_rate_control_unregister - Unregister the rate control callbacks
2883 *
2884 * This should be called after calling ieee80211_unregister_hw, but before
2885 * the driver is unloaded.
2886 */
2887 void il4965_rate_control_unregister(void);
2888 void il3945_rate_control_unregister(void);
2889
2890 int il_power_update_mode(struct il_priv *il, bool force);
2891 void il_power_initialize(struct il_priv *il);
2892
2893 extern u32 il_debug_level;
2894
2895 #ifdef CONFIG_IWLEGACY_DEBUG
2896 /*
2897 * il_get_debug_level: Return active debug level for device
2898 *
2899 * Using sysfs it is possible to set per device debug level. This debug
2900 * level will be used if set, otherwise the global debug level which can be
2901 * set via module parameter is used.
2902 */
2903 static inline u32
il_get_debug_level(struct il_priv * il)2904 il_get_debug_level(struct il_priv *il)
2905 {
2906 if (il->debug_level)
2907 return il->debug_level;
2908 else
2909 return il_debug_level;
2910 }
2911 #else
2912 static inline u32
il_get_debug_level(struct il_priv * il)2913 il_get_debug_level(struct il_priv *il)
2914 {
2915 return il_debug_level;
2916 }
2917 #endif
2918
2919 #define il_print_hex_error(il, p, len) \
2920 do { \
2921 print_hex_dump(KERN_ERR, "iwl data: ", \
2922 DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \
2923 } while (0)
2924
2925 #ifdef CONFIG_IWLEGACY_DEBUG
2926 #define IL_DBG(level, fmt, args...) \
2927 do { \
2928 if (il_get_debug_level(il) & level) \
2929 dev_err(&il->hw->wiphy->dev, "%s " fmt, __func__, \
2930 ##args); \
2931 } while (0)
2932
2933 #define il_print_hex_dump(il, level, p, len) \
2934 do { \
2935 if (il_get_debug_level(il) & level) \
2936 print_hex_dump(KERN_DEBUG, "iwl data: ", \
2937 DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \
2938 } while (0)
2939
2940 #else
2941 #define IL_DBG(level, fmt, args...) no_printk(fmt, ##args)
2942 static inline void
il_print_hex_dump(struct il_priv * il,int level,const void * p,u32 len)2943 il_print_hex_dump(struct il_priv *il, int level, const void *p, u32 len)
2944 {
2945 }
2946 #endif /* CONFIG_IWLEGACY_DEBUG */
2947
2948 #ifdef CONFIG_IWLEGACY_DEBUGFS
2949 void il_dbgfs_register(struct il_priv *il, const char *name);
2950 void il_dbgfs_unregister(struct il_priv *il);
2951 #else
il_dbgfs_register(struct il_priv * il,const char * name)2952 static inline void il_dbgfs_register(struct il_priv *il, const char *name)
2953 {
2954 }
2955
2956 static inline void
il_dbgfs_unregister(struct il_priv * il)2957 il_dbgfs_unregister(struct il_priv *il)
2958 {
2959 }
2960 #endif /* CONFIG_IWLEGACY_DEBUGFS */
2961
2962 /*
2963 * To use the debug system:
2964 *
2965 * If you are defining a new debug classification, simply add it to the #define
2966 * list here in the form of
2967 *
2968 * #define IL_DL_xxxx VALUE
2969 *
2970 * where xxxx should be the name of the classification (for example, WEP).
2971 *
2972 * You then need to either add a IL_xxxx_DEBUG() macro definition for your
2973 * classification, or use IL_DBG(IL_DL_xxxx, ...) whenever you want
2974 * to send output to that classification.
2975 *
2976 * The active debug levels can be accessed via files
2977 *
2978 * /sys/module/iwl4965/parameters/debug
2979 * /sys/module/iwl3945/parameters/debug
2980 * /sys/class/net/wlan0/device/debug_level
2981 *
2982 * when CONFIG_IWLEGACY_DEBUG=y.
2983 */
2984
2985 /* 0x0000000F - 0x00000001 */
2986 #define IL_DL_INFO (1 << 0)
2987 #define IL_DL_MAC80211 (1 << 1)
2988 #define IL_DL_HCMD (1 << 2)
2989 #define IL_DL_STATE (1 << 3)
2990 /* 0x000000F0 - 0x00000010 */
2991 #define IL_DL_MACDUMP (1 << 4)
2992 #define IL_DL_HCMD_DUMP (1 << 5)
2993 #define IL_DL_EEPROM (1 << 6)
2994 #define IL_DL_RADIO (1 << 7)
2995 /* 0x00000F00 - 0x00000100 */
2996 #define IL_DL_POWER (1 << 8)
2997 #define IL_DL_TEMP (1 << 9)
2998 #define IL_DL_NOTIF (1 << 10)
2999 #define IL_DL_SCAN (1 << 11)
3000 /* 0x0000F000 - 0x00001000 */
3001 #define IL_DL_ASSOC (1 << 12)
3002 #define IL_DL_DROP (1 << 13)
3003 #define IL_DL_TXPOWER (1 << 14)
3004 #define IL_DL_AP (1 << 15)
3005 /* 0x000F0000 - 0x00010000 */
3006 #define IL_DL_FW (1 << 16)
3007 #define IL_DL_RF_KILL (1 << 17)
3008 #define IL_DL_FW_ERRORS (1 << 18)
3009 #define IL_DL_LED (1 << 19)
3010 /* 0x00F00000 - 0x00100000 */
3011 #define IL_DL_RATE (1 << 20)
3012 #define IL_DL_CALIB (1 << 21)
3013 #define IL_DL_WEP (1 << 22)
3014 #define IL_DL_TX (1 << 23)
3015 /* 0x0F000000 - 0x01000000 */
3016 #define IL_DL_RX (1 << 24)
3017 #define IL_DL_ISR (1 << 25)
3018 #define IL_DL_HT (1 << 26)
3019 /* 0xF0000000 - 0x10000000 */
3020 #define IL_DL_11H (1 << 28)
3021 #define IL_DL_STATS (1 << 29)
3022 #define IL_DL_TX_REPLY (1 << 30)
3023 #define IL_DL_QOS (1 << 31)
3024
3025 #define D_INFO(f, a...) IL_DBG(IL_DL_INFO, f, ## a)
3026 #define D_MAC80211(f, a...) IL_DBG(IL_DL_MAC80211, f, ## a)
3027 #define D_MACDUMP(f, a...) IL_DBG(IL_DL_MACDUMP, f, ## a)
3028 #define D_TEMP(f, a...) IL_DBG(IL_DL_TEMP, f, ## a)
3029 #define D_SCAN(f, a...) IL_DBG(IL_DL_SCAN, f, ## a)
3030 #define D_RX(f, a...) IL_DBG(IL_DL_RX, f, ## a)
3031 #define D_TX(f, a...) IL_DBG(IL_DL_TX, f, ## a)
3032 #define D_ISR(f, a...) IL_DBG(IL_DL_ISR, f, ## a)
3033 #define D_LED(f, a...) IL_DBG(IL_DL_LED, f, ## a)
3034 #define D_WEP(f, a...) IL_DBG(IL_DL_WEP, f, ## a)
3035 #define D_HC(f, a...) IL_DBG(IL_DL_HCMD, f, ## a)
3036 #define D_HC_DUMP(f, a...) IL_DBG(IL_DL_HCMD_DUMP, f, ## a)
3037 #define D_EEPROM(f, a...) IL_DBG(IL_DL_EEPROM, f, ## a)
3038 #define D_CALIB(f, a...) IL_DBG(IL_DL_CALIB, f, ## a)
3039 #define D_FW(f, a...) IL_DBG(IL_DL_FW, f, ## a)
3040 #define D_RF_KILL(f, a...) IL_DBG(IL_DL_RF_KILL, f, ## a)
3041 #define D_DROP(f, a...) IL_DBG(IL_DL_DROP, f, ## a)
3042 #define D_AP(f, a...) IL_DBG(IL_DL_AP, f, ## a)
3043 #define D_TXPOWER(f, a...) IL_DBG(IL_DL_TXPOWER, f, ## a)
3044 #define D_RATE(f, a...) IL_DBG(IL_DL_RATE, f, ## a)
3045 #define D_NOTIF(f, a...) IL_DBG(IL_DL_NOTIF, f, ## a)
3046 #define D_ASSOC(f, a...) IL_DBG(IL_DL_ASSOC, f, ## a)
3047 #define D_HT(f, a...) IL_DBG(IL_DL_HT, f, ## a)
3048 #define D_STATS(f, a...) IL_DBG(IL_DL_STATS, f, ## a)
3049 #define D_TX_REPLY(f, a...) IL_DBG(IL_DL_TX_REPLY, f, ## a)
3050 #define D_QOS(f, a...) IL_DBG(IL_DL_QOS, f, ## a)
3051 #define D_RADIO(f, a...) IL_DBG(IL_DL_RADIO, f, ## a)
3052 #define D_POWER(f, a...) IL_DBG(IL_DL_POWER, f, ## a)
3053 #define D_11H(f, a...) IL_DBG(IL_DL_11H, f, ## a)
3054
3055 #endif /* __il_core_h__ */
3056