1config IWLEGACY
2	tristate
3	select FW_LOADER
4	select NEW_LEDS
5	select LEDS_CLASS
6	select LEDS_TRIGGERS
7	select MAC80211_LEDS
8
9config IWL4965
10	tristate "Intel Wireless WiFi 4965AGN (iwl4965)"
11	depends on PCI && MAC80211
12	select IWLEGACY
13	---help---
14	  This option enables support for
15
16	  Select to build the driver supporting the:
17
18	  Intel Wireless WiFi Link 4965AGN
19
20	  This driver uses the kernel's mac80211 subsystem.
21
22	  In order to use this driver, you will need a microcode (uCode)
23	  image for it. You can obtain the microcode from:
24
25	          <http://intellinuxwireless.org/>.
26
27	  The microcode is typically installed in /lib/firmware. You can
28	  look in the hotplug script /etc/hotplug/firmware.agent to
29	  determine which directory FIRMWARE_DIR is set to when the script
30	  runs.
31
32	  If you want to compile the driver as a module ( = code which can be
33	  inserted in and removed from the running kernel whenever you want),
34	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
35	  module will be called iwl4965.
36
37config IWL3945
38	tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
39	depends on PCI && MAC80211
40	select IWLEGACY
41	---help---
42	  Select to build the driver supporting the:
43
44	  Intel PRO/Wireless 3945ABG/BG Network Connection
45
46	  This driver uses the kernel's mac80211 subsystem.
47
48	  In order to use this driver, you will need a microcode (uCode)
49	  image for it. You can obtain the microcode from:
50
51	          <http://intellinuxwireless.org/>.
52
53	  The microcode is typically installed in /lib/firmware. You can
54	  look in the hotplug script /etc/hotplug/firmware.agent to
55	  determine which directory FIRMWARE_DIR is set to when the script
56	  runs.
57
58	  If you want to compile the driver as a module ( = code which can be
59	  inserted in and removed from the running kernel whenever you want),
60	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
61	  module will be called iwl3945.
62
63menu "iwl3945 / iwl4965 Debugging Options"
64	depends on IWLEGACY
65
66config IWLEGACY_DEBUG
67	bool "Enable full debugging output in iwlegacy (iwl 3945/4965) drivers"
68	depends on IWLEGACY
69	---help---
70	  This option will enable debug tracing output for the iwlegacy
71	  drivers.
72
73	  This will result in the kernel module being ~100k larger.  You can
74	  control which debug output is sent to the kernel log by setting the
75	  value in
76
77		/sys/class/net/wlan0/device/debug_level
78
79	  This entry will only exist if this option is enabled.
80
81	  To set a value, simply echo an 8-byte hex value to the same file:
82
83		  % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
84
85	  You can find the list of debug mask values in:
86		  drivers/net/wireless/iwlegacy/common.h
87
88	  If this is your first time using this driver, you should say Y here
89	  as the debug information can assist others in helping you resolve
90	  any problems you may encounter.
91
92config IWLEGACY_DEBUGFS
93        bool "iwlegacy (iwl 3945/4965) debugfs support"
94        depends on IWLEGACY && MAC80211_DEBUGFS
95        ---help---
96	  Enable creation of debugfs files for the iwlegacy drivers. This
97	  is a low-impact option that allows getting insight into the
98	  driver's state at runtime.
99
100endmenu
101