1 // SPDX-License-Identifier: GPL-2.0-only
2 /******************************************************************************
3  *
4  * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5  *
6  * Portions of this file are derived from the ipw3945 project, as well
7  * as portions of the ieee80211 subsystem header files.
8  *
9  * Contact Information:
10  *  Intel Linux Wireless <ilw@linux.intel.com>
11  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
12  *
13  *****************************************************************************/
14 
15 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
16 
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/pci.h>
21 #include <linux/slab.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/delay.h>
24 #include <linux/sched.h>
25 #include <linux/skbuff.h>
26 #include <linux/netdevice.h>
27 #include <linux/firmware.h>
28 #include <linux/etherdevice.h>
29 #include <linux/if_arp.h>
30 #include <linux/units.h>
31 
32 #include <net/mac80211.h>
33 
34 #include <asm/div64.h>
35 
36 #define DRV_NAME        "iwl4965"
37 
38 #include "common.h"
39 #include "4965.h"
40 
41 /******************************************************************************
42  *
43  * module boiler plate
44  *
45  ******************************************************************************/
46 
47 /*
48  * module name, copyright, version, etc.
49  */
50 #define DRV_DESCRIPTION	"Intel(R) Wireless WiFi 4965 driver for Linux"
51 
52 #ifdef CONFIG_IWLEGACY_DEBUG
53 #define VD "d"
54 #else
55 #define VD
56 #endif
57 
58 #define DRV_VERSION     IWLWIFI_VERSION VD
59 
60 MODULE_DESCRIPTION(DRV_DESCRIPTION);
61 MODULE_VERSION(DRV_VERSION);
62 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
63 MODULE_LICENSE("GPL");
64 MODULE_ALIAS("iwl4965");
65 
66 void
67 il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status)
68 {
69 	if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
70 		IL_ERR("Tx flush command to flush out all frames\n");
71 		if (!test_bit(S_EXIT_PENDING, &il->status))
72 			queue_work(il->workqueue, &il->tx_flush);
73 	}
74 }
75 
76 /*
77  * EEPROM
78  */
79 struct il_mod_params il4965_mod_params = {
80 	.restart_fw = 1,
81 	/* the rest are 0 by default */
82 };
83 
84 void
85 il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
86 {
87 	unsigned long flags;
88 	int i;
89 	spin_lock_irqsave(&rxq->lock, flags);
90 	INIT_LIST_HEAD(&rxq->rx_free);
91 	INIT_LIST_HEAD(&rxq->rx_used);
92 	/* Fill the rx_used queue with _all_ of the Rx buffers */
93 	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
94 		/* In the reset function, these buffers may have been allocated
95 		 * to an SKB, so we need to unmap and free potential storage */
96 		if (rxq->pool[i].page != NULL) {
97 			dma_unmap_page(&il->pci_dev->dev,
98 				       rxq->pool[i].page_dma,
99 				       PAGE_SIZE << il->hw_params.rx_page_order,
100 				       DMA_FROM_DEVICE);
101 			__il_free_pages(il, rxq->pool[i].page);
102 			rxq->pool[i].page = NULL;
103 		}
104 		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
105 	}
106 
107 	for (i = 0; i < RX_QUEUE_SIZE; i++)
108 		rxq->queue[i] = NULL;
109 
110 	/* Set us so that we have processed and used all buffers, but have
111 	 * not restocked the Rx queue with fresh buffers */
112 	rxq->read = rxq->write = 0;
113 	rxq->write_actual = 0;
114 	rxq->free_count = 0;
115 	spin_unlock_irqrestore(&rxq->lock, flags);
116 }
117 
118 int
119 il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
120 {
121 	u32 rb_size;
122 	const u32 rfdnlog = RX_QUEUE_SIZE_LOG;	/* 256 RBDs */
123 	u32 rb_timeout = 0;
124 
125 	if (il->cfg->mod_params->amsdu_size_8K)
126 		rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
127 	else
128 		rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
129 
130 	/* Stop Rx DMA */
131 	il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);
132 
133 	/* Reset driver's Rx queue write idx */
134 	il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
135 
136 	/* Tell device where to find RBD circular buffer in DRAM */
137 	il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32) (rxq->bd_dma >> 8));
138 
139 	/* Tell device where in DRAM to update its Rx status */
140 	il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4);
141 
142 	/* Enable Rx DMA
143 	 * Direct rx interrupts to hosts
144 	 * Rx buffer size 4 or 8k
145 	 * RB timeout 0x10
146 	 * 256 RBDs
147 	 */
148 	il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG,
149 	      FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
150 	      FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
151 	      FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
152 	      rb_size |
153 	      (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) |
154 	      (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
155 
156 	/* Set interrupt coalescing timer to default (2048 usecs) */
157 	il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF);
158 
159 	return 0;
160 }
161 
162 static void
163 il4965_set_pwr_vmain(struct il_priv *il)
164 {
165 /*
166  * (for documentation purposes)
167  * to set power to V_AUX, do:
168 
169 		if (pci_pme_capable(il->pci_dev, PCI_D3cold))
170 			il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
171 					       APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
172 					       ~APMG_PS_CTRL_MSK_PWR_SRC);
173  */
174 
175 	il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
176 			      APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
177 			      ~APMG_PS_CTRL_MSK_PWR_SRC);
178 }
179 
180 int
181 il4965_hw_nic_init(struct il_priv *il)
182 {
183 	unsigned long flags;
184 	struct il_rx_queue *rxq = &il->rxq;
185 	int ret;
186 
187 	spin_lock_irqsave(&il->lock, flags);
188 	il_apm_init(il);
189 	/* Set interrupt coalescing calibration timer to default (512 usecs) */
190 	il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF);
191 	spin_unlock_irqrestore(&il->lock, flags);
192 
193 	il4965_set_pwr_vmain(il);
194 	il4965_nic_config(il);
195 
196 	/* Allocate the RX queue, or reset if it is already allocated */
197 	if (!rxq->bd) {
198 		ret = il_rx_queue_alloc(il);
199 		if (ret) {
200 			IL_ERR("Unable to initialize Rx queue\n");
201 			return -ENOMEM;
202 		}
203 	} else
204 		il4965_rx_queue_reset(il, rxq);
205 
206 	il4965_rx_replenish(il);
207 
208 	il4965_rx_init(il, rxq);
209 
210 	spin_lock_irqsave(&il->lock, flags);
211 
212 	rxq->need_update = 1;
213 	il_rx_queue_update_write_ptr(il, rxq);
214 
215 	spin_unlock_irqrestore(&il->lock, flags);
216 
217 	/* Allocate or reset and init all Tx and Command queues */
218 	if (!il->txq) {
219 		ret = il4965_txq_ctx_alloc(il);
220 		if (ret)
221 			return ret;
222 	} else
223 		il4965_txq_ctx_reset(il);
224 
225 	set_bit(S_INIT, &il->status);
226 
227 	return 0;
228 }
229 
230 /*
231  * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
232  */
233 static inline __le32
234 il4965_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
235 {
236 	return cpu_to_le32((u32) (dma_addr >> 8));
237 }
238 
239 /*
240  * il4965_rx_queue_restock - refill RX queue from pre-allocated pool
241  *
242  * If there are slots in the RX queue that need to be restocked,
243  * and we have free pre-allocated buffers, fill the ranks as much
244  * as we can, pulling from rx_free.
245  *
246  * This moves the 'write' idx forward to catch up with 'processed', and
247  * also updates the memory address in the firmware to reference the new
248  * target buffer.
249  */
250 void
251 il4965_rx_queue_restock(struct il_priv *il)
252 {
253 	struct il_rx_queue *rxq = &il->rxq;
254 	struct list_head *element;
255 	struct il_rx_buf *rxb;
256 	unsigned long flags;
257 
258 	spin_lock_irqsave(&rxq->lock, flags);
259 	while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
260 		/* The overwritten rxb must be a used one */
261 		rxb = rxq->queue[rxq->write];
262 		BUG_ON(rxb && rxb->page);
263 
264 		/* Get next free Rx buffer, remove from free list */
265 		element = rxq->rx_free.next;
266 		rxb = list_entry(element, struct il_rx_buf, list);
267 		list_del(element);
268 
269 		/* Point to Rx buffer via next RBD in circular buffer */
270 		rxq->bd[rxq->write] =
271 		    il4965_dma_addr2rbd_ptr(il, rxb->page_dma);
272 		rxq->queue[rxq->write] = rxb;
273 		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
274 		rxq->free_count--;
275 	}
276 	spin_unlock_irqrestore(&rxq->lock, flags);
277 	/* If the pre-allocated buffer pool is dropping low, schedule to
278 	 * refill it */
279 	if (rxq->free_count <= RX_LOW_WATERMARK)
280 		queue_work(il->workqueue, &il->rx_replenish);
281 
282 	/* If we've added more space for the firmware to place data, tell it.
283 	 * Increment device's write pointer in multiples of 8. */
284 	if (rxq->write_actual != (rxq->write & ~0x7)) {
285 		spin_lock_irqsave(&rxq->lock, flags);
286 		rxq->need_update = 1;
287 		spin_unlock_irqrestore(&rxq->lock, flags);
288 		il_rx_queue_update_write_ptr(il, rxq);
289 	}
290 }
291 
292 /*
293  * il4965_rx_replenish - Move all used packet from rx_used to rx_free
294  *
295  * When moving to rx_free an SKB is allocated for the slot.
296  *
297  * Also restock the Rx queue via il_rx_queue_restock.
298  * This is called as a scheduled work item (except for during initialization)
299  */
300 static void
301 il4965_rx_allocate(struct il_priv *il, gfp_t priority)
302 {
303 	struct il_rx_queue *rxq = &il->rxq;
304 	struct list_head *element;
305 	struct il_rx_buf *rxb;
306 	struct page *page;
307 	dma_addr_t page_dma;
308 	unsigned long flags;
309 	gfp_t gfp_mask = priority;
310 
311 	while (1) {
312 		spin_lock_irqsave(&rxq->lock, flags);
313 		if (list_empty(&rxq->rx_used)) {
314 			spin_unlock_irqrestore(&rxq->lock, flags);
315 			return;
316 		}
317 		spin_unlock_irqrestore(&rxq->lock, flags);
318 
319 		if (rxq->free_count > RX_LOW_WATERMARK)
320 			gfp_mask |= __GFP_NOWARN;
321 
322 		if (il->hw_params.rx_page_order > 0)
323 			gfp_mask |= __GFP_COMP;
324 
325 		/* Alloc a new receive buffer */
326 		page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
327 		if (!page) {
328 			if (net_ratelimit())
329 				D_INFO("alloc_pages failed, " "order: %d\n",
330 				       il->hw_params.rx_page_order);
331 
332 			if (rxq->free_count <= RX_LOW_WATERMARK &&
333 			    net_ratelimit())
334 				IL_ERR("Failed to alloc_pages with %s. "
335 				       "Only %u free buffers remaining.\n",
336 				       priority ==
337 				       GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
338 				       rxq->free_count);
339 			/* We don't reschedule replenish work here -- we will
340 			 * call the restock method and if it still needs
341 			 * more buffers it will schedule replenish */
342 			return;
343 		}
344 
345 		/* Get physical address of the RB */
346 		page_dma = dma_map_page(&il->pci_dev->dev, page, 0,
347 					PAGE_SIZE << il->hw_params.rx_page_order,
348 					DMA_FROM_DEVICE);
349 		if (unlikely(dma_mapping_error(&il->pci_dev->dev, page_dma))) {
350 			__free_pages(page, il->hw_params.rx_page_order);
351 			break;
352 		}
353 
354 		spin_lock_irqsave(&rxq->lock, flags);
355 
356 		if (list_empty(&rxq->rx_used)) {
357 			spin_unlock_irqrestore(&rxq->lock, flags);
358 			dma_unmap_page(&il->pci_dev->dev, page_dma,
359 				       PAGE_SIZE << il->hw_params.rx_page_order,
360 				       DMA_FROM_DEVICE);
361 			__free_pages(page, il->hw_params.rx_page_order);
362 			return;
363 		}
364 
365 		element = rxq->rx_used.next;
366 		rxb = list_entry(element, struct il_rx_buf, list);
367 		list_del(element);
368 
369 		BUG_ON(rxb->page);
370 
371 		rxb->page = page;
372 		rxb->page_dma = page_dma;
373 		list_add_tail(&rxb->list, &rxq->rx_free);
374 		rxq->free_count++;
375 		il->alloc_rxb_page++;
376 
377 		spin_unlock_irqrestore(&rxq->lock, flags);
378 	}
379 }
380 
381 void
382 il4965_rx_replenish(struct il_priv *il)
383 {
384 	unsigned long flags;
385 
386 	il4965_rx_allocate(il, GFP_KERNEL);
387 
388 	spin_lock_irqsave(&il->lock, flags);
389 	il4965_rx_queue_restock(il);
390 	spin_unlock_irqrestore(&il->lock, flags);
391 }
392 
393 void
394 il4965_rx_replenish_now(struct il_priv *il)
395 {
396 	il4965_rx_allocate(il, GFP_ATOMIC);
397 
398 	il4965_rx_queue_restock(il);
399 }
400 
401 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
402  * If an SKB has been detached, the POOL needs to have its SKB set to NULL
403  * This free routine walks the list of POOL entries and if SKB is set to
404  * non NULL it is unmapped and freed
405  */
406 void
407 il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
408 {
409 	int i;
410 	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
411 		if (rxq->pool[i].page != NULL) {
412 			dma_unmap_page(&il->pci_dev->dev,
413 				       rxq->pool[i].page_dma,
414 				       PAGE_SIZE << il->hw_params.rx_page_order,
415 				       DMA_FROM_DEVICE);
416 			__il_free_pages(il, rxq->pool[i].page);
417 			rxq->pool[i].page = NULL;
418 		}
419 	}
420 
421 	dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
422 			  rxq->bd_dma);
423 	dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
424 			  rxq->rb_stts, rxq->rb_stts_dma);
425 	rxq->bd = NULL;
426 	rxq->rb_stts = NULL;
427 }
428 
429 int
430 il4965_rxq_stop(struct il_priv *il)
431 {
432 	int ret;
433 
434 	_il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);
435 	ret = _il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG,
436 			   FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
437 			   FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
438 			   1000);
439 	if (ret < 0)
440 		IL_ERR("Can't stop Rx DMA.\n");
441 
442 	return 0;
443 }
444 
445 int
446 il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum nl80211_band band)
447 {
448 	int idx = 0;
449 	int band_offset = 0;
450 
451 	/* HT rate format: mac80211 wants an MCS number, which is just LSB */
452 	if (rate_n_flags & RATE_MCS_HT_MSK) {
453 		idx = (rate_n_flags & 0xff);
454 		return idx;
455 		/* Legacy rate format, search for match in table */
456 	} else {
457 		if (band == NL80211_BAND_5GHZ)
458 			band_offset = IL_FIRST_OFDM_RATE;
459 		for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++)
460 			if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
461 				return idx - band_offset;
462 	}
463 
464 	return -1;
465 }
466 
467 static int
468 il4965_calc_rssi(struct il_priv *il, struct il_rx_phy_res *rx_resp)
469 {
470 	/* data from PHY/DSP regarding signal strength, etc.,
471 	 *   contents are always there, not configurable by host.  */
472 	struct il4965_rx_non_cfg_phy *ncphy =
473 	    (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
474 	u32 agc =
475 	    (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK) >>
476 	    IL49_AGC_DB_POS;
477 
478 	u32 valid_antennae =
479 	    (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK)
480 	    >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
481 	u8 max_rssi = 0;
482 	u32 i;
483 
484 	/* Find max rssi among 3 possible receivers.
485 	 * These values are measured by the digital signal processor (DSP).
486 	 * They should stay fairly constant even as the signal strength varies,
487 	 *   if the radio's automatic gain control (AGC) is working right.
488 	 * AGC value (see below) will provide the "interesting" info. */
489 	for (i = 0; i < 3; i++)
490 		if (valid_antennae & (1 << i))
491 			max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
492 
493 	D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
494 		ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
495 		max_rssi, agc);
496 
497 	/* dBm = max_rssi dB - agc dB - constant.
498 	 * Higher AGC (higher radio gain) means lower signal. */
499 	return max_rssi - agc - IL4965_RSSI_OFFSET;
500 }
501 
502 static u32
503 il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in)
504 {
505 	u32 decrypt_out = 0;
506 
507 	if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
508 	    RX_RES_STATUS_STATION_FOUND)
509 		decrypt_out |=
510 		    (RX_RES_STATUS_STATION_FOUND |
511 		     RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
512 
513 	decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
514 
515 	/* packet was not encrypted */
516 	if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
517 	    RX_RES_STATUS_SEC_TYPE_NONE)
518 		return decrypt_out;
519 
520 	/* packet was encrypted with unknown alg */
521 	if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
522 	    RX_RES_STATUS_SEC_TYPE_ERR)
523 		return decrypt_out;
524 
525 	/* decryption was not done in HW */
526 	if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
527 	    RX_MPDU_RES_STATUS_DEC_DONE_MSK)
528 		return decrypt_out;
529 
530 	switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
531 
532 	case RX_RES_STATUS_SEC_TYPE_CCMP:
533 		/* alg is CCM: check MIC only */
534 		if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
535 			/* Bad MIC */
536 			decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
537 		else
538 			decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
539 
540 		break;
541 
542 	case RX_RES_STATUS_SEC_TYPE_TKIP:
543 		if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
544 			/* Bad TTAK */
545 			decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
546 			break;
547 		}
548 		fallthrough;	/* if TTAK OK */
549 	default:
550 		if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
551 			decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
552 		else
553 			decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
554 		break;
555 	}
556 
557 	D_RX("decrypt_in:0x%x  decrypt_out = 0x%x\n", decrypt_in, decrypt_out);
558 
559 	return decrypt_out;
560 }
561 
562 #define SMALL_PACKET_SIZE 256
563 
564 static void
565 il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr,
566 			       u32 len, u32 ampdu_status, struct il_rx_buf *rxb,
567 			       struct ieee80211_rx_status *stats)
568 {
569 	struct sk_buff *skb;
570 	__le16 fc = hdr->frame_control;
571 
572 	/* We only process data packets if the interface is open */
573 	if (unlikely(!il->is_open)) {
574 		D_DROP("Dropping packet while interface is not open.\n");
575 		return;
576 	}
577 
578 	if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) {
579 		il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
580 		D_INFO("Woke queues - frame received on passive channel\n");
581 	}
582 
583 	/* In case of HW accelerated crypto and bad decryption, drop */
584 	if (!il->cfg->mod_params->sw_crypto &&
585 	    il_set_decrypted_flag(il, hdr, ampdu_status, stats))
586 		return;
587 
588 	skb = dev_alloc_skb(SMALL_PACKET_SIZE);
589 	if (!skb) {
590 		IL_ERR("dev_alloc_skb failed\n");
591 		return;
592 	}
593 
594 	if (len <= SMALL_PACKET_SIZE) {
595 		skb_put_data(skb, hdr, len);
596 	} else {
597 		skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb),
598 				len, PAGE_SIZE << il->hw_params.rx_page_order);
599 		il->alloc_rxb_page--;
600 		rxb->page = NULL;
601 	}
602 
603 	il_update_stats(il, false, fc, len);
604 	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
605 
606 	ieee80211_rx(il->hw, skb);
607 }
608 
609 /* Called for N_RX (legacy ABG frames), or
610  * N_RX_MPDU (HT high-throughput N frames). */
611 static void
612 il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
613 {
614 	struct ieee80211_hdr *header;
615 	struct ieee80211_rx_status rx_status = {};
616 	struct il_rx_pkt *pkt = rxb_addr(rxb);
617 	struct il_rx_phy_res *phy_res;
618 	__le32 rx_pkt_status;
619 	struct il_rx_mpdu_res_start *amsdu;
620 	u32 len;
621 	u32 ampdu_status;
622 	u32 rate_n_flags;
623 
624 	/**
625 	 * N_RX and N_RX_MPDU are handled differently.
626 	 *	N_RX: physical layer info is in this buffer
627 	 *	N_RX_MPDU: physical layer info was sent in separate
628 	 *		command and cached in il->last_phy_res
629 	 *
630 	 * Here we set up local variables depending on which command is
631 	 * received.
632 	 */
633 	if (pkt->hdr.cmd == N_RX) {
634 		phy_res = (struct il_rx_phy_res *)pkt->u.raw;
635 		header =
636 		    (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) +
637 					     phy_res->cfg_phy_cnt);
638 
639 		len = le16_to_cpu(phy_res->byte_count);
640 		rx_pkt_status =
641 		    *(__le32 *) (pkt->u.raw + sizeof(*phy_res) +
642 				 phy_res->cfg_phy_cnt + len);
643 		ampdu_status = le32_to_cpu(rx_pkt_status);
644 	} else {
645 		if (!il->_4965.last_phy_res_valid) {
646 			IL_ERR("MPDU frame without cached PHY data\n");
647 			return;
648 		}
649 		phy_res = &il->_4965.last_phy_res;
650 		amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw;
651 		header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
652 		len = le16_to_cpu(amsdu->byte_count);
653 		rx_pkt_status = *(__le32 *) (pkt->u.raw + sizeof(*amsdu) + len);
654 		ampdu_status =
655 		    il4965_translate_rx_status(il, le32_to_cpu(rx_pkt_status));
656 	}
657 
658 	if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
659 		D_DROP("dsp size out of range [0,20]: %d\n",
660 		       phy_res->cfg_phy_cnt);
661 		return;
662 	}
663 
664 	if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
665 	    !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
666 		D_RX("Bad CRC or FIFO: 0x%08X.\n", le32_to_cpu(rx_pkt_status));
667 		return;
668 	}
669 
670 	/* This will be used in several places later */
671 	rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
672 
673 	/* rx_status carries information about the packet to mac80211 */
674 	rx_status.mactime = le64_to_cpu(phy_res->timestamp);
675 	rx_status.band =
676 	    (phy_res->
677 	     phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? NL80211_BAND_2GHZ :
678 	    NL80211_BAND_5GHZ;
679 	rx_status.freq =
680 	    ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
681 					   rx_status.band);
682 	rx_status.rate_idx =
683 	    il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
684 	rx_status.flag = 0;
685 
686 	/* TSF isn't reliable. In order to allow smooth user experience,
687 	 * this W/A doesn't propagate it to the mac80211 */
688 	/*rx_status.flag |= RX_FLAG_MACTIME_START; */
689 
690 	il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
691 
692 	/* Find max signal strength (dBm) among 3 antenna/receiver chains */
693 	rx_status.signal = il4965_calc_rssi(il, phy_res);
694 
695 	D_STATS("Rssi %d, TSF %llu\n", rx_status.signal,
696 		(unsigned long long)rx_status.mactime);
697 
698 	/*
699 	 * "antenna number"
700 	 *
701 	 * It seems that the antenna field in the phy flags value
702 	 * is actually a bit field. This is undefined by radiotap,
703 	 * it wants an actual antenna number but I always get "7"
704 	 * for most legacy frames I receive indicating that the
705 	 * same frame was received on all three RX chains.
706 	 *
707 	 * I think this field should be removed in favor of a
708 	 * new 802.11n radiotap field "RX chains" that is defined
709 	 * as a bitmask.
710 	 */
711 	rx_status.antenna =
712 	    (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >>
713 	    RX_RES_PHY_FLAGS_ANTENNA_POS;
714 
715 	/* set the preamble flag if appropriate */
716 	if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
717 		rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE;
718 
719 	/* Set up the HT phy flags */
720 	if (rate_n_flags & RATE_MCS_HT_MSK)
721 		rx_status.encoding = RX_ENC_HT;
722 	if (rate_n_flags & RATE_MCS_HT40_MSK)
723 		rx_status.bw = RATE_INFO_BW_40;
724 	else
725 		rx_status.bw = RATE_INFO_BW_20;
726 	if (rate_n_flags & RATE_MCS_SGI_MSK)
727 		rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI;
728 
729 	if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) {
730 		/* We know which subframes of an A-MPDU belong
731 		 * together since we get a single PHY response
732 		 * from the firmware for all of them.
733 		 */
734 
735 		rx_status.flag |= RX_FLAG_AMPDU_DETAILS;
736 		rx_status.ampdu_reference = il->_4965.ampdu_ref;
737 	}
738 
739 	il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb,
740 				       &rx_status);
741 }
742 
743 /* Cache phy data (Rx signal strength, etc) for HT frame (N_RX_PHY).
744  * This will be used later in il_hdl_rx() for N_RX_MPDU. */
745 static void
746 il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb)
747 {
748 	struct il_rx_pkt *pkt = rxb_addr(rxb);
749 	il->_4965.last_phy_res_valid = true;
750 	il->_4965.ampdu_ref++;
751 	memcpy(&il->_4965.last_phy_res, pkt->u.raw,
752 	       sizeof(struct il_rx_phy_res));
753 }
754 
755 static int
756 il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif,
757 			     enum nl80211_band band, u8 is_active,
758 			     u8 n_probes, struct il_scan_channel *scan_ch)
759 {
760 	struct ieee80211_channel *chan;
761 	const struct ieee80211_supported_band *sband;
762 	const struct il_channel_info *ch_info;
763 	u16 passive_dwell = 0;
764 	u16 active_dwell = 0;
765 	int added, i;
766 	u16 channel;
767 
768 	sband = il_get_hw_mode(il, band);
769 	if (!sband)
770 		return 0;
771 
772 	active_dwell = il_get_active_dwell_time(il, band, n_probes);
773 	passive_dwell = il_get_passive_dwell_time(il, band, vif);
774 
775 	if (passive_dwell <= active_dwell)
776 		passive_dwell = active_dwell + 1;
777 
778 	for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
779 		chan = il->scan_request->channels[i];
780 
781 		if (chan->band != band)
782 			continue;
783 
784 		channel = chan->hw_value;
785 		scan_ch->channel = cpu_to_le16(channel);
786 
787 		ch_info = il_get_channel_info(il, band, channel);
788 		if (!il_is_channel_valid(ch_info)) {
789 			D_SCAN("Channel %d is INVALID for this band.\n",
790 			       channel);
791 			continue;
792 		}
793 
794 		if (!is_active || il_is_channel_passive(ch_info) ||
795 		    (chan->flags & IEEE80211_CHAN_NO_IR))
796 			scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
797 		else
798 			scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
799 
800 		if (n_probes)
801 			scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes);
802 
803 		scan_ch->active_dwell = cpu_to_le16(active_dwell);
804 		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
805 
806 		/* Set txpower levels to defaults */
807 		scan_ch->dsp_atten = 110;
808 
809 		/* NOTE: if we were doing 6Mb OFDM for scans we'd use
810 		 * power level:
811 		 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
812 		 */
813 		if (band == NL80211_BAND_5GHZ)
814 			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
815 		else
816 			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
817 
818 		D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", channel,
819 		       le32_to_cpu(scan_ch->type),
820 		       (scan_ch->
821 			type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE",
822 		       (scan_ch->
823 			type & SCAN_CHANNEL_TYPE_ACTIVE) ? active_dwell :
824 		       passive_dwell);
825 
826 		scan_ch++;
827 		added++;
828 	}
829 
830 	D_SCAN("total channels to scan %d\n", added);
831 	return added;
832 }
833 
834 static void
835 il4965_toggle_tx_ant(struct il_priv *il, u8 *ant, u8 valid)
836 {
837 	int i;
838 	u8 ind = *ant;
839 
840 	for (i = 0; i < RATE_ANT_NUM - 1; i++) {
841 		ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
842 		if (valid & BIT(ind)) {
843 			*ant = ind;
844 			return;
845 		}
846 	}
847 }
848 
849 int
850 il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
851 {
852 	struct il_host_cmd cmd = {
853 		.id = C_SCAN,
854 		.len = sizeof(struct il_scan_cmd),
855 		.flags = CMD_SIZE_HUGE,
856 	};
857 	struct il_scan_cmd *scan;
858 	u32 rate_flags = 0;
859 	u16 cmd_len;
860 	u16 rx_chain = 0;
861 	enum nl80211_band band;
862 	u8 n_probes = 0;
863 	u8 rx_ant = il->hw_params.valid_rx_ant;
864 	u8 rate;
865 	bool is_active = false;
866 	int chan_mod;
867 	u8 active_chains;
868 	u8 scan_tx_antennas = il->hw_params.valid_tx_ant;
869 	int ret;
870 
871 	lockdep_assert_held(&il->mutex);
872 
873 	if (!il->scan_cmd) {
874 		il->scan_cmd =
875 		    kmalloc(sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE,
876 			    GFP_KERNEL);
877 		if (!il->scan_cmd) {
878 			D_SCAN("fail to allocate memory for scan\n");
879 			return -ENOMEM;
880 		}
881 	}
882 	scan = il->scan_cmd;
883 	memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE);
884 
885 	scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
886 	scan->quiet_time = IL_ACTIVE_QUIET_TIME;
887 
888 	if (il_is_any_associated(il)) {
889 		u16 interval;
890 		u32 extra;
891 		u32 suspend_time = 100;
892 		u32 scan_suspend_time = 100;
893 
894 		D_INFO("Scanning while associated...\n");
895 		interval = vif->bss_conf.beacon_int;
896 
897 		scan->suspend_time = 0;
898 		scan->max_out_time = cpu_to_le32(200 * 1024);
899 		if (!interval)
900 			interval = suspend_time;
901 
902 		extra = (suspend_time / interval) << 22;
903 		scan_suspend_time =
904 		    (extra | ((suspend_time % interval) * 1024));
905 		scan->suspend_time = cpu_to_le32(scan_suspend_time);
906 		D_SCAN("suspend_time 0x%X beacon interval %d\n",
907 		       scan_suspend_time, interval);
908 	}
909 
910 	if (il->scan_request->n_ssids) {
911 		int i, p = 0;
912 		D_SCAN("Kicking off active scan\n");
913 		for (i = 0; i < il->scan_request->n_ssids; i++) {
914 			/* always does wildcard anyway */
915 			if (!il->scan_request->ssids[i].ssid_len)
916 				continue;
917 			scan->direct_scan[p].id = WLAN_EID_SSID;
918 			scan->direct_scan[p].len =
919 			    il->scan_request->ssids[i].ssid_len;
920 			memcpy(scan->direct_scan[p].ssid,
921 			       il->scan_request->ssids[i].ssid,
922 			       il->scan_request->ssids[i].ssid_len);
923 			n_probes++;
924 			p++;
925 		}
926 		is_active = true;
927 	} else
928 		D_SCAN("Start passive scan.\n");
929 
930 	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
931 	scan->tx_cmd.sta_id = il->hw_params.bcast_id;
932 	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
933 
934 	switch (il->scan_band) {
935 	case NL80211_BAND_2GHZ:
936 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
937 		chan_mod =
938 		    le32_to_cpu(il->active.flags & RXON_FLG_CHANNEL_MODE_MSK) >>
939 		    RXON_FLG_CHANNEL_MODE_POS;
940 		if (chan_mod == CHANNEL_MODE_PURE_40) {
941 			rate = RATE_6M_PLCP;
942 		} else {
943 			rate = RATE_1M_PLCP;
944 			rate_flags = RATE_MCS_CCK_MSK;
945 		}
946 		break;
947 	case NL80211_BAND_5GHZ:
948 		rate = RATE_6M_PLCP;
949 		break;
950 	default:
951 		IL_WARN("Invalid scan band\n");
952 		return -EIO;
953 	}
954 
955 	/*
956 	 * If active scanning is requested but a certain channel is
957 	 * marked passive, we can do active scanning if we detect
958 	 * transmissions.
959 	 *
960 	 * There is an issue with some firmware versions that triggers
961 	 * a sysassert on a "good CRC threshold" of zero (== disabled),
962 	 * on a radar channel even though this means that we should NOT
963 	 * send probes.
964 	 *
965 	 * The "good CRC threshold" is the number of frames that we
966 	 * need to receive during our dwell time on a channel before
967 	 * sending out probes -- setting this to a huge value will
968 	 * mean we never reach it, but at the same time work around
969 	 * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER
970 	 * here instead of IL_GOOD_CRC_TH_DISABLED.
971 	 */
972 	scan->good_CRC_th =
973 	    is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
974 
975 	band = il->scan_band;
976 
977 	if (il->cfg->scan_rx_antennas[band])
978 		rx_ant = il->cfg->scan_rx_antennas[band];
979 
980 	il4965_toggle_tx_ant(il, &il->scan_tx_ant[band], scan_tx_antennas);
981 	rate_flags |= BIT(il->scan_tx_ant[band]) << RATE_MCS_ANT_POS;
982 	scan->tx_cmd.rate_n_flags = cpu_to_le32(rate | rate_flags);
983 
984 	/* In power save mode use one chain, otherwise use all chains */
985 	if (test_bit(S_POWER_PMI, &il->status)) {
986 		/* rx_ant has been set to all valid chains previously */
987 		active_chains =
988 		    rx_ant & ((u8) (il->chain_noise_data.active_chains));
989 		if (!active_chains)
990 			active_chains = rx_ant;
991 
992 		D_SCAN("chain_noise_data.active_chains: %u\n",
993 		       il->chain_noise_data.active_chains);
994 
995 		rx_ant = il4965_first_antenna(active_chains);
996 	}
997 
998 	/* MIMO is not used here, but value is required */
999 	rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
1000 	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
1001 	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
1002 	rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
1003 	scan->rx_chain = cpu_to_le16(rx_chain);
1004 
1005 	cmd_len =
1006 	    il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
1007 			      vif->addr, il->scan_request->ie,
1008 			      il->scan_request->ie_len,
1009 			      IL_MAX_SCAN_SIZE - sizeof(*scan));
1010 	scan->tx_cmd.len = cpu_to_le16(cmd_len);
1011 
1012 	scan->filter_flags |=
1013 	    (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK);
1014 
1015 	scan->channel_count =
1016 	    il4965_get_channels_for_scan(il, vif, band, is_active, n_probes,
1017 					 (void *)&scan->data[cmd_len]);
1018 	if (scan->channel_count == 0) {
1019 		D_SCAN("channel count %d\n", scan->channel_count);
1020 		return -EIO;
1021 	}
1022 
1023 	cmd.len +=
1024 	    le16_to_cpu(scan->tx_cmd.len) +
1025 	    scan->channel_count * sizeof(struct il_scan_channel);
1026 	cmd.data = scan;
1027 	scan->len = cpu_to_le16(cmd.len);
1028 
1029 	set_bit(S_SCAN_HW, &il->status);
1030 
1031 	ret = il_send_cmd_sync(il, &cmd);
1032 	if (ret)
1033 		clear_bit(S_SCAN_HW, &il->status);
1034 
1035 	return ret;
1036 }
1037 
1038 int
1039 il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
1040 			   bool add)
1041 {
1042 	struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
1043 
1044 	if (add)
1045 		return il4965_add_bssid_station(il, vif->bss_conf.bssid,
1046 						&vif_priv->ibss_bssid_sta_id);
1047 	return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
1048 				 vif->bss_conf.bssid);
1049 }
1050 
1051 void
1052 il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, int freed)
1053 {
1054 	lockdep_assert_held(&il->sta_lock);
1055 
1056 	if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed)
1057 		il->stations[sta_id].tid[tid].tfds_in_queue -= freed;
1058 	else {
1059 		D_TX("free more than tfds_in_queue (%u:%d)\n",
1060 		     il->stations[sta_id].tid[tid].tfds_in_queue, freed);
1061 		il->stations[sta_id].tid[tid].tfds_in_queue = 0;
1062 	}
1063 }
1064 
1065 #define IL_TX_QUEUE_MSK	0xfffff
1066 
1067 static bool
1068 il4965_is_single_rx_stream(struct il_priv *il)
1069 {
1070 	return il->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
1071 	    il->current_ht_config.single_chain_sufficient;
1072 }
1073 
1074 #define IL_NUM_RX_CHAINS_MULTIPLE	3
1075 #define IL_NUM_RX_CHAINS_SINGLE	2
1076 #define IL_NUM_IDLE_CHAINS_DUAL	2
1077 #define IL_NUM_IDLE_CHAINS_SINGLE	1
1078 
1079 /*
1080  * Determine how many receiver/antenna chains to use.
1081  *
1082  * More provides better reception via diversity.  Fewer saves power
1083  * at the expense of throughput, but only when not in powersave to
1084  * start with.
1085  *
1086  * MIMO (dual stream) requires at least 2, but works better with 3.
1087  * This does not determine *which* chains to use, just how many.
1088  */
1089 static int
1090 il4965_get_active_rx_chain_count(struct il_priv *il)
1091 {
1092 	/* # of Rx chains to use when expecting MIMO. */
1093 	if (il4965_is_single_rx_stream(il))
1094 		return IL_NUM_RX_CHAINS_SINGLE;
1095 	else
1096 		return IL_NUM_RX_CHAINS_MULTIPLE;
1097 }
1098 
1099 /*
1100  * When we are in power saving mode, unless device support spatial
1101  * multiplexing power save, use the active count for rx chain count.
1102  */
1103 static int
1104 il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt)
1105 {
1106 	/* # Rx chains when idling, depending on SMPS mode */
1107 	switch (il->current_ht_config.smps) {
1108 	case IEEE80211_SMPS_STATIC:
1109 	case IEEE80211_SMPS_DYNAMIC:
1110 		return IL_NUM_IDLE_CHAINS_SINGLE;
1111 	case IEEE80211_SMPS_OFF:
1112 		return active_cnt;
1113 	default:
1114 		WARN(1, "invalid SMPS mode %d", il->current_ht_config.smps);
1115 		return active_cnt;
1116 	}
1117 }
1118 
1119 /* up to 4 chains */
1120 static u8
1121 il4965_count_chain_bitmap(u32 chain_bitmap)
1122 {
1123 	u8 res;
1124 	res = (chain_bitmap & BIT(0)) >> 0;
1125 	res += (chain_bitmap & BIT(1)) >> 1;
1126 	res += (chain_bitmap & BIT(2)) >> 2;
1127 	res += (chain_bitmap & BIT(3)) >> 3;
1128 	return res;
1129 }
1130 
1131 /*
1132  * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
1133  *
1134  * Selects how many and which Rx receivers/antennas/chains to use.
1135  * This should not be used for scan command ... it puts data in wrong place.
1136  */
1137 void
1138 il4965_set_rxon_chain(struct il_priv *il)
1139 {
1140 	bool is_single = il4965_is_single_rx_stream(il);
1141 	bool is_cam = !test_bit(S_POWER_PMI, &il->status);
1142 	u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
1143 	u32 active_chains;
1144 	u16 rx_chain;
1145 
1146 	/* Tell uCode which antennas are actually connected.
1147 	 * Before first association, we assume all antennas are connected.
1148 	 * Just after first association, il4965_chain_noise_calibration()
1149 	 *    checks which antennas actually *are* connected. */
1150 	if (il->chain_noise_data.active_chains)
1151 		active_chains = il->chain_noise_data.active_chains;
1152 	else
1153 		active_chains = il->hw_params.valid_rx_ant;
1154 
1155 	rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
1156 
1157 	/* How many receivers should we use? */
1158 	active_rx_cnt = il4965_get_active_rx_chain_count(il);
1159 	idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt);
1160 
1161 	/* correct rx chain count according hw settings
1162 	 * and chain noise calibration
1163 	 */
1164 	valid_rx_cnt = il4965_count_chain_bitmap(active_chains);
1165 	if (valid_rx_cnt < active_rx_cnt)
1166 		active_rx_cnt = valid_rx_cnt;
1167 
1168 	if (valid_rx_cnt < idle_rx_cnt)
1169 		idle_rx_cnt = valid_rx_cnt;
1170 
1171 	rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
1172 	rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
1173 
1174 	il->staging.rx_chain = cpu_to_le16(rx_chain);
1175 
1176 	if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam)
1177 		il->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
1178 	else
1179 		il->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
1180 
1181 	D_ASSOC("rx_chain=0x%X active=%d idle=%d\n", il->staging.rx_chain,
1182 		active_rx_cnt, idle_rx_cnt);
1183 
1184 	WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
1185 		active_rx_cnt < idle_rx_cnt);
1186 }
1187 
1188 static const char *
1189 il4965_get_fh_string(int cmd)
1190 {
1191 	switch (cmd) {
1192 		IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG);
1193 		IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG);
1194 		IL_CMD(FH49_RSCSR_CHNL0_WPTR);
1195 		IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG);
1196 		IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG);
1197 		IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG);
1198 		IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
1199 		IL_CMD(FH49_TSSR_TX_STATUS_REG);
1200 		IL_CMD(FH49_TSSR_TX_ERROR_REG);
1201 	default:
1202 		return "UNKNOWN";
1203 	}
1204 }
1205 
1206 int
1207 il4965_dump_fh(struct il_priv *il, char **buf, bool display)
1208 {
1209 	int i;
1210 #ifdef CONFIG_IWLEGACY_DEBUG
1211 	int pos = 0;
1212 	size_t bufsz = 0;
1213 #endif
1214 	static const u32 fh_tbl[] = {
1215 		FH49_RSCSR_CHNL0_STTS_WPTR_REG,
1216 		FH49_RSCSR_CHNL0_RBDCB_BASE_REG,
1217 		FH49_RSCSR_CHNL0_WPTR,
1218 		FH49_MEM_RCSR_CHNL0_CONFIG_REG,
1219 		FH49_MEM_RSSR_SHARED_CTRL_REG,
1220 		FH49_MEM_RSSR_RX_STATUS_REG,
1221 		FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
1222 		FH49_TSSR_TX_STATUS_REG,
1223 		FH49_TSSR_TX_ERROR_REG
1224 	};
1225 #ifdef CONFIG_IWLEGACY_DEBUG
1226 	if (display) {
1227 		bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
1228 		*buf = kmalloc(bufsz, GFP_KERNEL);
1229 		if (!*buf)
1230 			return -ENOMEM;
1231 		pos +=
1232 		    scnprintf(*buf + pos, bufsz - pos, "FH register values:\n");
1233 		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
1234 			pos +=
1235 			    scnprintf(*buf + pos, bufsz - pos,
1236 				      "  %34s: 0X%08x\n",
1237 				      il4965_get_fh_string(fh_tbl[i]),
1238 				      il_rd(il, fh_tbl[i]));
1239 		}
1240 		return pos;
1241 	}
1242 #endif
1243 	IL_ERR("FH register values:\n");
1244 	for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
1245 		IL_ERR("  %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]),
1246 		       il_rd(il, fh_tbl[i]));
1247 	}
1248 	return 0;
1249 }
1250 
1251 static void
1252 il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb)
1253 {
1254 	struct il_rx_pkt *pkt = rxb_addr(rxb);
1255 	struct il_missed_beacon_notif *missed_beacon;
1256 
1257 	missed_beacon = &pkt->u.missed_beacon;
1258 	if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) >
1259 	    il->missed_beacon_threshold) {
1260 		D_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n",
1261 			le32_to_cpu(missed_beacon->consecutive_missed_beacons),
1262 			le32_to_cpu(missed_beacon->total_missed_becons),
1263 			le32_to_cpu(missed_beacon->num_recvd_beacons),
1264 			le32_to_cpu(missed_beacon->num_expected_beacons));
1265 		if (!test_bit(S_SCANNING, &il->status))
1266 			il4965_init_sensitivity(il);
1267 	}
1268 }
1269 
1270 /* Calculate noise level, based on measurements during network silence just
1271  *   before arriving beacon.  This measurement can be done only if we know
1272  *   exactly when to expect beacons, therefore only when we're associated. */
1273 static void
1274 il4965_rx_calc_noise(struct il_priv *il)
1275 {
1276 	struct stats_rx_non_phy *rx_info;
1277 	int num_active_rx = 0;
1278 	int total_silence = 0;
1279 	int bcn_silence_a, bcn_silence_b, bcn_silence_c;
1280 	int last_rx_noise;
1281 
1282 	rx_info = &(il->_4965.stats.rx.general);
1283 	bcn_silence_a =
1284 	    le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
1285 	bcn_silence_b =
1286 	    le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
1287 	bcn_silence_c =
1288 	    le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;
1289 
1290 	if (bcn_silence_a) {
1291 		total_silence += bcn_silence_a;
1292 		num_active_rx++;
1293 	}
1294 	if (bcn_silence_b) {
1295 		total_silence += bcn_silence_b;
1296 		num_active_rx++;
1297 	}
1298 	if (bcn_silence_c) {
1299 		total_silence += bcn_silence_c;
1300 		num_active_rx++;
1301 	}
1302 
1303 	/* Average among active antennas */
1304 	if (num_active_rx)
1305 		last_rx_noise = (total_silence / num_active_rx) - 107;
1306 	else
1307 		last_rx_noise = IL_NOISE_MEAS_NOT_AVAILABLE;
1308 
1309 	D_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", bcn_silence_a,
1310 		bcn_silence_b, bcn_silence_c, last_rx_noise);
1311 }
1312 
1313 #ifdef CONFIG_IWLEGACY_DEBUGFS
1314 /*
1315  *  based on the assumption of all stats counter are in DWORD
1316  *  FIXME: This function is for debugging, do not deal with
1317  *  the case of counters roll-over.
1318  */
1319 static void
1320 il4965_accumulative_stats(struct il_priv *il, __le32 * stats)
1321 {
1322 	int i, size;
1323 	__le32 *prev_stats;
1324 	u32 *accum_stats;
1325 	u32 *delta, *max_delta;
1326 	struct stats_general_common *general, *accum_general;
1327 
1328 	prev_stats = (__le32 *) &il->_4965.stats;
1329 	accum_stats = (u32 *) &il->_4965.accum_stats;
1330 	size = sizeof(struct il_notif_stats);
1331 	general = &il->_4965.stats.general.common;
1332 	accum_general = &il->_4965.accum_stats.general.common;
1333 	delta = (u32 *) &il->_4965.delta_stats;
1334 	max_delta = (u32 *) &il->_4965.max_delta;
1335 
1336 	for (i = sizeof(__le32); i < size;
1337 	     i +=
1338 	     sizeof(__le32), stats++, prev_stats++, delta++, max_delta++,
1339 	     accum_stats++) {
1340 		if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
1341 			*delta =
1342 			    (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats));
1343 			*accum_stats += *delta;
1344 			if (*delta > *max_delta)
1345 				*max_delta = *delta;
1346 		}
1347 	}
1348 
1349 	/* reset accumulative stats for "no-counter" type stats */
1350 	accum_general->temperature = general->temperature;
1351 	accum_general->ttl_timestamp = general->ttl_timestamp;
1352 }
1353 #endif
1354 
1355 static void
1356 il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb)
1357 {
1358 	const int recalib_seconds = 60;
1359 	bool change;
1360 	struct il_rx_pkt *pkt = rxb_addr(rxb);
1361 
1362 	D_RX("Statistics notification received (%d vs %d).\n",
1363 	     (int)sizeof(struct il_notif_stats),
1364 	     le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK);
1365 
1366 	change =
1367 	    ((il->_4965.stats.general.common.temperature !=
1368 	      pkt->u.stats.general.common.temperature) ||
1369 	     ((il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK) !=
1370 	      (pkt->u.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK)));
1371 #ifdef CONFIG_IWLEGACY_DEBUGFS
1372 	il4965_accumulative_stats(il, (__le32 *) &pkt->u.stats);
1373 #endif
1374 
1375 	/* TODO: reading some of stats is unneeded */
1376 	memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats));
1377 
1378 	set_bit(S_STATS, &il->status);
1379 
1380 	/*
1381 	 * Reschedule the stats timer to occur in recalib_seconds to ensure
1382 	 * we get a thermal update even if the uCode doesn't give us one
1383 	 */
1384 	mod_timer(&il->stats_periodic,
1385 		  jiffies + msecs_to_jiffies(recalib_seconds * 1000));
1386 
1387 	if (unlikely(!test_bit(S_SCANNING, &il->status)) &&
1388 	    (pkt->hdr.cmd == N_STATS)) {
1389 		il4965_rx_calc_noise(il);
1390 		queue_work(il->workqueue, &il->run_time_calib_work);
1391 	}
1392 
1393 	if (change)
1394 		il4965_temperature_calib(il);
1395 }
1396 
1397 static void
1398 il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb)
1399 {
1400 	struct il_rx_pkt *pkt = rxb_addr(rxb);
1401 
1402 	if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATS_CLEAR_MSK) {
1403 #ifdef CONFIG_IWLEGACY_DEBUGFS
1404 		memset(&il->_4965.accum_stats, 0,
1405 		       sizeof(struct il_notif_stats));
1406 		memset(&il->_4965.delta_stats, 0,
1407 		       sizeof(struct il_notif_stats));
1408 		memset(&il->_4965.max_delta, 0, sizeof(struct il_notif_stats));
1409 #endif
1410 		D_RX("Statistics have been cleared\n");
1411 	}
1412 	il4965_hdl_stats(il, rxb);
1413 }
1414 
1415 
1416 /*
1417  * mac80211 queues, ACs, hardware queues, FIFOs.
1418  *
1419  * Cf. https://wireless.wiki.kernel.org/en/developers/Documentation/mac80211/queues
1420  *
1421  * Mac80211 uses the following numbers, which we get as from it
1422  * by way of skb_get_queue_mapping(skb):
1423  *
1424  *     VO      0
1425  *     VI      1
1426  *     BE      2
1427  *     BK      3
1428  *
1429  *
1430  * Regular (not A-MPDU) frames are put into hardware queues corresponding
1431  * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
1432  * own queue per aggregation session (RA/TID combination), such queues are
1433  * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
1434  * order to map frames to the right queue, we also need an AC->hw queue
1435  * mapping. This is implemented here.
1436  *
1437  * Due to the way hw queues are set up (by the hw specific modules like
1438  * 4965.c), the AC->hw queue mapping is the identity
1439  * mapping.
1440  */
1441 
1442 static const u8 tid_to_ac[] = {
1443 	IEEE80211_AC_BE,
1444 	IEEE80211_AC_BK,
1445 	IEEE80211_AC_BK,
1446 	IEEE80211_AC_BE,
1447 	IEEE80211_AC_VI,
1448 	IEEE80211_AC_VI,
1449 	IEEE80211_AC_VO,
1450 	IEEE80211_AC_VO
1451 };
1452 
1453 static inline int
1454 il4965_get_ac_from_tid(u16 tid)
1455 {
1456 	if (likely(tid < ARRAY_SIZE(tid_to_ac)))
1457 		return tid_to_ac[tid];
1458 
1459 	/* no support for TIDs 8-15 yet */
1460 	return -EINVAL;
1461 }
1462 
1463 static inline int
1464 il4965_get_fifo_from_tid(u16 tid)
1465 {
1466 	static const u8 ac_to_fifo[] = {
1467 		IL_TX_FIFO_VO,
1468 		IL_TX_FIFO_VI,
1469 		IL_TX_FIFO_BE,
1470 		IL_TX_FIFO_BK,
1471 	};
1472 
1473 	if (likely(tid < ARRAY_SIZE(tid_to_ac)))
1474 		return ac_to_fifo[tid_to_ac[tid]];
1475 
1476 	/* no support for TIDs 8-15 yet */
1477 	return -EINVAL;
1478 }
1479 
1480 /*
1481  * handle build C_TX command notification.
1482  */
1483 static void
1484 il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb,
1485 			  struct il_tx_cmd *tx_cmd,
1486 			  struct ieee80211_tx_info *info,
1487 			  struct ieee80211_hdr *hdr, u8 std_id)
1488 {
1489 	__le16 fc = hdr->frame_control;
1490 	__le32 tx_flags = tx_cmd->tx_flags;
1491 
1492 	tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
1493 	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
1494 		tx_flags |= TX_CMD_FLG_ACK_MSK;
1495 		if (ieee80211_is_mgmt(fc))
1496 			tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
1497 		if (ieee80211_is_probe_resp(fc) &&
1498 		    !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
1499 			tx_flags |= TX_CMD_FLG_TSF_MSK;
1500 	} else {
1501 		tx_flags &= (~TX_CMD_FLG_ACK_MSK);
1502 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
1503 	}
1504 
1505 	if (ieee80211_is_back_req(fc))
1506 		tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK;
1507 
1508 	tx_cmd->sta_id = std_id;
1509 	if (ieee80211_has_morefrags(fc))
1510 		tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
1511 
1512 	if (ieee80211_is_data_qos(fc)) {
1513 		u8 *qc = ieee80211_get_qos_ctl(hdr);
1514 		tx_cmd->tid_tspec = qc[0] & 0xf;
1515 		tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
1516 	} else {
1517 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
1518 	}
1519 
1520 	il_tx_cmd_protection(il, info, fc, &tx_flags);
1521 
1522 	tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
1523 	if (ieee80211_is_mgmt(fc)) {
1524 		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
1525 			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
1526 		else
1527 			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
1528 	} else {
1529 		tx_cmd->timeout.pm_frame_timeout = 0;
1530 	}
1531 
1532 	tx_cmd->driver_txop = 0;
1533 	tx_cmd->tx_flags = tx_flags;
1534 	tx_cmd->next_frame_len = 0;
1535 }
1536 
1537 static void
1538 il4965_tx_cmd_build_rate(struct il_priv *il,
1539 			 struct il_tx_cmd *tx_cmd,
1540 			 struct ieee80211_tx_info *info,
1541 			 struct ieee80211_sta *sta,
1542 			 __le16 fc)
1543 {
1544 	const u8 rts_retry_limit = 60;
1545 	u32 rate_flags;
1546 	int rate_idx;
1547 	u8 data_retry_limit;
1548 	u8 rate_plcp;
1549 
1550 	/* Set retry limit on DATA packets and Probe Responses */
1551 	if (ieee80211_is_probe_resp(fc))
1552 		data_retry_limit = 3;
1553 	else
1554 		data_retry_limit = IL4965_DEFAULT_TX_RETRY;
1555 	tx_cmd->data_retry_limit = data_retry_limit;
1556 	/* Set retry limit on RTS packets */
1557 	tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit);
1558 
1559 	/* DATA packets will use the uCode station table for rate/antenna
1560 	 * selection */
1561 	if (ieee80211_is_data(fc)) {
1562 		tx_cmd->initial_rate_idx = 0;
1563 		tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
1564 		return;
1565 	}
1566 
1567 	/**
1568 	 * If the current TX rate stored in mac80211 has the MCS bit set, it's
1569 	 * not really a TX rate.  Thus, we use the lowest supported rate for
1570 	 * this band.  Also use the lowest supported rate if the stored rate
1571 	 * idx is invalid.
1572 	 */
1573 	rate_idx = info->control.rates[0].idx;
1574 	if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0
1575 	    || rate_idx > RATE_COUNT_LEGACY)
1576 		rate_idx = rate_lowest_index(&il->bands[info->band], sta);
1577 	/* For 5 GHZ band, remap mac80211 rate indices into driver indices */
1578 	if (info->band == NL80211_BAND_5GHZ)
1579 		rate_idx += IL_FIRST_OFDM_RATE;
1580 	/* Get PLCP rate for tx_cmd->rate_n_flags */
1581 	rate_plcp = il_rates[rate_idx].plcp;
1582 	/* Zero out flags for this packet */
1583 	rate_flags = 0;
1584 
1585 	/* Set CCK flag as needed */
1586 	if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE)
1587 		rate_flags |= RATE_MCS_CCK_MSK;
1588 
1589 	/* Set up antennas */
1590 	il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant);
1591 	rate_flags |= BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS;
1592 
1593 	/* Set the rate in the TX cmd */
1594 	tx_cmd->rate_n_flags = cpu_to_le32(rate_plcp | rate_flags);
1595 }
1596 
1597 static void
1598 il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
1599 			     struct il_tx_cmd *tx_cmd, struct sk_buff *skb_frag,
1600 			     int sta_id)
1601 {
1602 	struct ieee80211_key_conf *keyconf = info->control.hw_key;
1603 
1604 	switch (keyconf->cipher) {
1605 	case WLAN_CIPHER_SUITE_CCMP:
1606 		tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
1607 		memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
1608 		if (info->flags & IEEE80211_TX_CTL_AMPDU)
1609 			tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK;
1610 		D_TX("tx_cmd with AES hwcrypto\n");
1611 		break;
1612 
1613 	case WLAN_CIPHER_SUITE_TKIP:
1614 		tx_cmd->sec_ctl = TX_CMD_SEC_TKIP;
1615 		ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key);
1616 		D_TX("tx_cmd with tkip hwcrypto\n");
1617 		break;
1618 
1619 	case WLAN_CIPHER_SUITE_WEP104:
1620 		tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
1621 		fallthrough;
1622 	case WLAN_CIPHER_SUITE_WEP40:
1623 		tx_cmd->sec_ctl |=
1624 		    (TX_CMD_SEC_WEP | (keyconf->keyidx & TX_CMD_SEC_MSK) <<
1625 		     TX_CMD_SEC_SHIFT);
1626 
1627 		memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);
1628 
1629 		D_TX("Configuring packet for WEP encryption " "with key %d\n",
1630 		     keyconf->keyidx);
1631 		break;
1632 
1633 	default:
1634 		IL_ERR("Unknown encode cipher %x\n", keyconf->cipher);
1635 		break;
1636 	}
1637 }
1638 
1639 /*
1640  * start C_TX command process
1641  */
1642 int
1643 il4965_tx_skb(struct il_priv *il,
1644 	      struct ieee80211_sta *sta,
1645 	      struct sk_buff *skb)
1646 {
1647 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
1648 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1649 	struct il_station_priv *sta_priv = NULL;
1650 	struct il_tx_queue *txq;
1651 	struct il_queue *q;
1652 	struct il_device_cmd *out_cmd;
1653 	struct il_cmd_meta *out_meta;
1654 	struct il_tx_cmd *tx_cmd;
1655 	int txq_id;
1656 	dma_addr_t phys_addr;
1657 	dma_addr_t txcmd_phys;
1658 	dma_addr_t scratch_phys;
1659 	u16 len, firstlen, secondlen;
1660 	u16 seq_number = 0;
1661 	__le16 fc;
1662 	u8 hdr_len;
1663 	u8 sta_id;
1664 	u8 wait_write_ptr = 0;
1665 	u8 tid = 0;
1666 	u8 *qc = NULL;
1667 	unsigned long flags;
1668 	bool is_agg = false;
1669 
1670 	spin_lock_irqsave(&il->lock, flags);
1671 	if (il_is_rfkill(il)) {
1672 		D_DROP("Dropping - RF KILL\n");
1673 		goto drop_unlock;
1674 	}
1675 
1676 	fc = hdr->frame_control;
1677 
1678 #ifdef CONFIG_IWLEGACY_DEBUG
1679 	if (ieee80211_is_auth(fc))
1680 		D_TX("Sending AUTH frame\n");
1681 	else if (ieee80211_is_assoc_req(fc))
1682 		D_TX("Sending ASSOC frame\n");
1683 	else if (ieee80211_is_reassoc_req(fc))
1684 		D_TX("Sending REASSOC frame\n");
1685 #endif
1686 
1687 	hdr_len = ieee80211_hdrlen(fc);
1688 
1689 	/* For management frames use broadcast id to do not break aggregation */
1690 	if (!ieee80211_is_data(fc))
1691 		sta_id = il->hw_params.bcast_id;
1692 	else {
1693 		/* Find idx into station table for destination station */
1694 		sta_id = il_sta_id_or_broadcast(il, sta);
1695 
1696 		if (sta_id == IL_INVALID_STATION) {
1697 			D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
1698 			goto drop_unlock;
1699 		}
1700 	}
1701 
1702 	D_TX("station Id %d\n", sta_id);
1703 
1704 	if (sta)
1705 		sta_priv = (void *)sta->drv_priv;
1706 
1707 	if (sta_priv && sta_priv->asleep &&
1708 	    (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) {
1709 		/*
1710 		 * This sends an asynchronous command to the device,
1711 		 * but we can rely on it being processed before the
1712 		 * next frame is processed -- and the next frame to
1713 		 * this station is the one that will consume this
1714 		 * counter.
1715 		 * For now set the counter to just 1 since we do not
1716 		 * support uAPSD yet.
1717 		 */
1718 		il4965_sta_modify_sleep_tx_count(il, sta_id, 1);
1719 	}
1720 
1721 	/* FIXME: remove me ? */
1722 	WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM);
1723 
1724 	/* Access category (AC) is also the queue number */
1725 	txq_id = skb_get_queue_mapping(skb);
1726 
1727 	/* irqs already disabled/saved above when locking il->lock */
1728 	spin_lock(&il->sta_lock);
1729 
1730 	if (ieee80211_is_data_qos(fc)) {
1731 		qc = ieee80211_get_qos_ctl(hdr);
1732 		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
1733 		if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) {
1734 			spin_unlock(&il->sta_lock);
1735 			goto drop_unlock;
1736 		}
1737 		seq_number = il->stations[sta_id].tid[tid].seq_number;
1738 		seq_number &= IEEE80211_SCTL_SEQ;
1739 		hdr->seq_ctrl =
1740 		    hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG);
1741 		hdr->seq_ctrl |= cpu_to_le16(seq_number);
1742 		seq_number += 0x10;
1743 		/* aggregation is on for this <sta,tid> */
1744 		if (info->flags & IEEE80211_TX_CTL_AMPDU &&
1745 		    il->stations[sta_id].tid[tid].agg.state == IL_AGG_ON) {
1746 			txq_id = il->stations[sta_id].tid[tid].agg.txq_id;
1747 			is_agg = true;
1748 		}
1749 	}
1750 
1751 	txq = &il->txq[txq_id];
1752 	q = &txq->q;
1753 
1754 	if (unlikely(il_queue_space(q) < q->high_mark)) {
1755 		spin_unlock(&il->sta_lock);
1756 		goto drop_unlock;
1757 	}
1758 
1759 	if (ieee80211_is_data_qos(fc)) {
1760 		il->stations[sta_id].tid[tid].tfds_in_queue++;
1761 		if (!ieee80211_has_morefrags(fc))
1762 			il->stations[sta_id].tid[tid].seq_number = seq_number;
1763 	}
1764 
1765 	spin_unlock(&il->sta_lock);
1766 
1767 	txq->skbs[q->write_ptr] = skb;
1768 
1769 	/* Set up first empty entry in queue's array of Tx/cmd buffers */
1770 	out_cmd = txq->cmd[q->write_ptr];
1771 	out_meta = &txq->meta[q->write_ptr];
1772 	tx_cmd = &out_cmd->cmd.tx;
1773 	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
1774 	memset(tx_cmd, 0, sizeof(struct il_tx_cmd));
1775 
1776 	/*
1777 	 * Set up the Tx-command (not MAC!) header.
1778 	 * Store the chosen Tx queue and TFD idx within the sequence field;
1779 	 * after Tx, uCode's Tx response will return this value so driver can
1780 	 * locate the frame within the tx queue and do post-tx processing.
1781 	 */
1782 	out_cmd->hdr.cmd = C_TX;
1783 	out_cmd->hdr.sequence =
1784 	    cpu_to_le16((u16)
1785 			(QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
1786 
1787 	/* Copy MAC header from skb into command buffer */
1788 	memcpy(tx_cmd->hdr, hdr, hdr_len);
1789 
1790 	/* Total # bytes to be transmitted */
1791 	tx_cmd->len = cpu_to_le16((u16) skb->len);
1792 
1793 	if (info->control.hw_key)
1794 		il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id);
1795 
1796 	/* TODO need this for burst mode later on */
1797 	il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id);
1798 
1799 	il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc);
1800 
1801 	/*
1802 	 * Use the first empty entry in this queue's command buffer array
1803 	 * to contain the Tx command and MAC header concatenated together
1804 	 * (payload data will be in another buffer).
1805 	 * Size of this varies, due to varying MAC header length.
1806 	 * If end is not dword aligned, we'll have 2 extra bytes at the end
1807 	 * of the MAC header (device reads on dword boundaries).
1808 	 * We'll tell device about this padding later.
1809 	 */
1810 	len = sizeof(struct il_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len;
1811 	firstlen = (len + 3) & ~3;
1812 
1813 	/* Tell NIC about any 2-byte padding after MAC header */
1814 	if (firstlen != len)
1815 		tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
1816 
1817 	/* Physical address of this Tx command's header (not MAC header!),
1818 	 * within command buffer array. */
1819 	txcmd_phys = dma_map_single(&il->pci_dev->dev, &out_cmd->hdr, firstlen,
1820 				    DMA_BIDIRECTIONAL);
1821 	if (unlikely(dma_mapping_error(&il->pci_dev->dev, txcmd_phys)))
1822 		goto drop_unlock;
1823 
1824 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
1825 	 * if any (802.11 null frames have no payload). */
1826 	secondlen = skb->len - hdr_len;
1827 	if (secondlen > 0) {
1828 		phys_addr = dma_map_single(&il->pci_dev->dev, skb->data + hdr_len,
1829 					   secondlen, DMA_TO_DEVICE);
1830 		if (unlikely(dma_mapping_error(&il->pci_dev->dev, phys_addr)))
1831 			goto drop_unlock;
1832 	}
1833 
1834 	/* Add buffer containing Tx command and MAC(!) header to TFD's
1835 	 * first entry */
1836 	il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
1837 	dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
1838 	dma_unmap_len_set(out_meta, len, firstlen);
1839 	if (secondlen)
1840 		il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen,
1841 					       0, 0);
1842 
1843 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
1844 		txq->need_update = 1;
1845 	} else {
1846 		wait_write_ptr = 1;
1847 		txq->need_update = 0;
1848 	}
1849 
1850 	scratch_phys =
1851 	    txcmd_phys + sizeof(struct il_cmd_header) +
1852 	    offsetof(struct il_tx_cmd, scratch);
1853 
1854 	/* take back ownership of DMA buffer to enable update */
1855 	dma_sync_single_for_cpu(&il->pci_dev->dev, txcmd_phys, firstlen,
1856 				DMA_BIDIRECTIONAL);
1857 	tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
1858 	tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys);
1859 
1860 	il_update_stats(il, true, fc, skb->len);
1861 
1862 	D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
1863 	D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
1864 	il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd));
1865 	il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, hdr_len);
1866 
1867 	/* Set up entry for this TFD in Tx byte-count array */
1868 	if (info->flags & IEEE80211_TX_CTL_AMPDU)
1869 		il->ops->txq_update_byte_cnt_tbl(il, txq, le16_to_cpu(tx_cmd->len));
1870 
1871 	dma_sync_single_for_device(&il->pci_dev->dev, txcmd_phys, firstlen,
1872 				   DMA_BIDIRECTIONAL);
1873 
1874 	/* Tell device the write idx *just past* this latest filled TFD */
1875 	q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
1876 	il_txq_update_write_ptr(il, txq);
1877 	spin_unlock_irqrestore(&il->lock, flags);
1878 
1879 	/*
1880 	 * At this point the frame is "transmitted" successfully
1881 	 * and we will get a TX status notification eventually,
1882 	 * regardless of the value of ret. "ret" only indicates
1883 	 * whether or not we should update the write pointer.
1884 	 */
1885 
1886 	/*
1887 	 * Avoid atomic ops if it isn't an associated client.
1888 	 * Also, if this is a packet for aggregation, don't
1889 	 * increase the counter because the ucode will stop
1890 	 * aggregation queues when their respective station
1891 	 * goes to sleep.
1892 	 */
1893 	if (sta_priv && sta_priv->client && !is_agg)
1894 		atomic_inc(&sta_priv->pending_frames);
1895 
1896 	if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
1897 		if (wait_write_ptr) {
1898 			spin_lock_irqsave(&il->lock, flags);
1899 			txq->need_update = 1;
1900 			il_txq_update_write_ptr(il, txq);
1901 			spin_unlock_irqrestore(&il->lock, flags);
1902 		} else {
1903 			il_stop_queue(il, txq);
1904 		}
1905 	}
1906 
1907 	return 0;
1908 
1909 drop_unlock:
1910 	spin_unlock_irqrestore(&il->lock, flags);
1911 	return -1;
1912 }
1913 
1914 static inline int
1915 il4965_alloc_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr, size_t size)
1916 {
1917 	ptr->addr = dma_alloc_coherent(&il->pci_dev->dev, size, &ptr->dma,
1918 				       GFP_KERNEL);
1919 	if (!ptr->addr)
1920 		return -ENOMEM;
1921 	ptr->size = size;
1922 	return 0;
1923 }
1924 
1925 static inline void
1926 il4965_free_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr)
1927 {
1928 	if (unlikely(!ptr->addr))
1929 		return;
1930 
1931 	dma_free_coherent(&il->pci_dev->dev, ptr->size, ptr->addr, ptr->dma);
1932 	memset(ptr, 0, sizeof(*ptr));
1933 }
1934 
1935 /*
1936  * il4965_hw_txq_ctx_free - Free TXQ Context
1937  *
1938  * Destroy all TX DMA queues and structures
1939  */
1940 void
1941 il4965_hw_txq_ctx_free(struct il_priv *il)
1942 {
1943 	int txq_id;
1944 
1945 	/* Tx queues */
1946 	if (il->txq) {
1947 		for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
1948 			if (txq_id == il->cmd_queue)
1949 				il_cmd_queue_free(il);
1950 			else
1951 				il_tx_queue_free(il, txq_id);
1952 	}
1953 	il4965_free_dma_ptr(il, &il->kw);
1954 
1955 	il4965_free_dma_ptr(il, &il->scd_bc_tbls);
1956 
1957 	/* free tx queue structure */
1958 	il_free_txq_mem(il);
1959 }
1960 
1961 /*
1962  * il4965_txq_ctx_alloc - allocate TX queue context
1963  * Allocate all Tx DMA structures and initialize them
1964  */
1965 int
1966 il4965_txq_ctx_alloc(struct il_priv *il)
1967 {
1968 	int ret, txq_id;
1969 	unsigned long flags;
1970 
1971 	/* Free all tx/cmd queues and keep-warm buffer */
1972 	il4965_hw_txq_ctx_free(il);
1973 
1974 	ret =
1975 	    il4965_alloc_dma_ptr(il, &il->scd_bc_tbls,
1976 				 il->hw_params.scd_bc_tbls_size);
1977 	if (ret) {
1978 		IL_ERR("Scheduler BC Table allocation failed\n");
1979 		goto error_bc_tbls;
1980 	}
1981 	/* Alloc keep-warm buffer */
1982 	ret = il4965_alloc_dma_ptr(il, &il->kw, IL_KW_SIZE);
1983 	if (ret) {
1984 		IL_ERR("Keep Warm allocation failed\n");
1985 		goto error_kw;
1986 	}
1987 
1988 	/* allocate tx queue structure */
1989 	ret = il_alloc_txq_mem(il);
1990 	if (ret)
1991 		goto error;
1992 
1993 	spin_lock_irqsave(&il->lock, flags);
1994 
1995 	/* Turn off all Tx DMA fifos */
1996 	il4965_txq_set_sched(il, 0);
1997 
1998 	/* Tell NIC where to find the "keep warm" buffer */
1999 	il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);
2000 
2001 	spin_unlock_irqrestore(&il->lock, flags);
2002 
2003 	/* Alloc and init all Tx queues, including the command queue (#4/#9) */
2004 	for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
2005 		ret = il_tx_queue_init(il, txq_id);
2006 		if (ret) {
2007 			IL_ERR("Tx %d queue init failed\n", txq_id);
2008 			goto error;
2009 		}
2010 	}
2011 
2012 	return ret;
2013 
2014 error:
2015 	il4965_hw_txq_ctx_free(il);
2016 	il4965_free_dma_ptr(il, &il->kw);
2017 error_kw:
2018 	il4965_free_dma_ptr(il, &il->scd_bc_tbls);
2019 error_bc_tbls:
2020 	return ret;
2021 }
2022 
2023 void
2024 il4965_txq_ctx_reset(struct il_priv *il)
2025 {
2026 	int txq_id;
2027 	unsigned long flags;
2028 
2029 	spin_lock_irqsave(&il->lock, flags);
2030 
2031 	/* Turn off all Tx DMA fifos */
2032 	il4965_txq_set_sched(il, 0);
2033 	/* Tell NIC where to find the "keep warm" buffer */
2034 	il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);
2035 
2036 	spin_unlock_irqrestore(&il->lock, flags);
2037 
2038 	/* Alloc and init all Tx queues, including the command queue (#4) */
2039 	for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
2040 		il_tx_queue_reset(il, txq_id);
2041 }
2042 
2043 static void
2044 il4965_txq_ctx_unmap(struct il_priv *il)
2045 {
2046 	int txq_id;
2047 
2048 	if (!il->txq)
2049 		return;
2050 
2051 	/* Unmap DMA from host system and free skb's */
2052 	for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
2053 		if (txq_id == il->cmd_queue)
2054 			il_cmd_queue_unmap(il);
2055 		else
2056 			il_tx_queue_unmap(il, txq_id);
2057 }
2058 
2059 /*
2060  * il4965_txq_ctx_stop - Stop all Tx DMA channels
2061  */
2062 void
2063 il4965_txq_ctx_stop(struct il_priv *il)
2064 {
2065 	int ch, ret;
2066 
2067 	_il_wr_prph(il, IL49_SCD_TXFACT, 0);
2068 
2069 	/* Stop each Tx DMA channel, and wait for it to be idle */
2070 	for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) {
2071 		_il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0);
2072 		ret =
2073 		    _il_poll_bit(il, FH49_TSSR_TX_STATUS_REG,
2074 				 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
2075 				 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
2076 				 1000);
2077 		if (ret < 0)
2078 			IL_ERR("Timeout stopping DMA channel %d [0x%08x]",
2079 			       ch, _il_rd(il, FH49_TSSR_TX_STATUS_REG));
2080 	}
2081 }
2082 
2083 /*
2084  * Find first available (lowest unused) Tx Queue, mark it "active".
2085  * Called only when finding queue for aggregation.
2086  * Should never return anything < 7, because they should already
2087  * be in use as EDCA AC (0-3), Command (4), reserved (5, 6)
2088  */
2089 static int
2090 il4965_txq_ctx_activate_free(struct il_priv *il)
2091 {
2092 	int txq_id;
2093 
2094 	for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
2095 		if (!test_and_set_bit(txq_id, &il->txq_ctx_active_msk))
2096 			return txq_id;
2097 	return -1;
2098 }
2099 
2100 /*
2101  * il4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
2102  */
2103 static void
2104 il4965_tx_queue_stop_scheduler(struct il_priv *il, u16 txq_id)
2105 {
2106 	/* Simply stop the queue, but don't change any configuration;
2107 	 * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
2108 	il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
2109 		   (0 << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
2110 		   (1 << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
2111 }
2112 
2113 /*
2114  * il4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
2115  */
2116 static int
2117 il4965_tx_queue_set_q2ratid(struct il_priv *il, u16 ra_tid, u16 txq_id)
2118 {
2119 	u32 tbl_dw_addr;
2120 	u32 tbl_dw;
2121 	u16 scd_q2ratid;
2122 
2123 	scd_q2ratid = ra_tid & IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
2124 
2125 	tbl_dw_addr =
2126 	    il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
2127 
2128 	tbl_dw = il_read_targ_mem(il, tbl_dw_addr);
2129 
2130 	if (txq_id & 0x1)
2131 		tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
2132 	else
2133 		tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
2134 
2135 	il_write_targ_mem(il, tbl_dw_addr, tbl_dw);
2136 
2137 	return 0;
2138 }
2139 
2140 /*
2141  * il4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
2142  *
2143  * NOTE:  txq_id must be greater than IL49_FIRST_AMPDU_QUEUE,
2144  *        i.e. it must be one of the higher queues used for aggregation
2145  */
2146 static int
2147 il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id,
2148 		      int tid, u16 ssn_idx)
2149 {
2150 	unsigned long flags;
2151 	u16 ra_tid;
2152 	int ret;
2153 
2154 	if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
2155 	    (IL49_FIRST_AMPDU_QUEUE +
2156 	     il->cfg->num_of_ampdu_queues <= txq_id)) {
2157 		IL_WARN("queue number out of range: %d, must be %d to %d\n",
2158 			txq_id, IL49_FIRST_AMPDU_QUEUE,
2159 			IL49_FIRST_AMPDU_QUEUE +
2160 			il->cfg->num_of_ampdu_queues - 1);
2161 		return -EINVAL;
2162 	}
2163 
2164 	ra_tid = BUILD_RAxTID(sta_id, tid);
2165 
2166 	/* Modify device's station table to Tx this TID */
2167 	ret = il4965_sta_tx_modify_enable_tid(il, sta_id, tid);
2168 	if (ret)
2169 		return ret;
2170 
2171 	spin_lock_irqsave(&il->lock, flags);
2172 
2173 	/* Stop this Tx queue before configuring it */
2174 	il4965_tx_queue_stop_scheduler(il, txq_id);
2175 
2176 	/* Map receiver-address / traffic-ID to this queue */
2177 	il4965_tx_queue_set_q2ratid(il, ra_tid, txq_id);
2178 
2179 	/* Set this queue as a chain-building queue */
2180 	il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
2181 
2182 	/* Place first TFD at idx corresponding to start sequence number.
2183 	 * Assumes that ssn_idx is valid (!= 0xFFF) */
2184 	il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
2185 	il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
2186 	il4965_set_wr_ptrs(il, txq_id, ssn_idx);
2187 
2188 	/* Set up Tx win size and frame limit for this queue */
2189 	il_write_targ_mem(il,
2190 			  il->scd_base_addr +
2191 			  IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
2192 			  (SCD_WIN_SIZE << IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS)
2193 			  & IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
2194 
2195 	il_write_targ_mem(il,
2196 			  il->scd_base_addr +
2197 			  IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
2198 			  (SCD_FRAME_LIMIT <<
2199 			   IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
2200 			  IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
2201 
2202 	il_set_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id));
2203 
2204 	/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
2205 	il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 1);
2206 
2207 	spin_unlock_irqrestore(&il->lock, flags);
2208 
2209 	return 0;
2210 }
2211 
2212 int
2213 il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif,
2214 		    struct ieee80211_sta *sta, u16 tid, u16 * ssn)
2215 {
2216 	int sta_id;
2217 	int tx_fifo;
2218 	int txq_id;
2219 	int ret;
2220 	unsigned long flags;
2221 	struct il_tid_data *tid_data;
2222 
2223 	/* FIXME: warning if tx fifo not found ? */
2224 	tx_fifo = il4965_get_fifo_from_tid(tid);
2225 	if (unlikely(tx_fifo < 0))
2226 		return tx_fifo;
2227 
2228 	D_HT("%s on ra = %pM tid = %d\n", __func__, sta->addr, tid);
2229 
2230 	sta_id = il_sta_id(sta);
2231 	if (sta_id == IL_INVALID_STATION) {
2232 		IL_ERR("Start AGG on invalid station\n");
2233 		return -ENXIO;
2234 	}
2235 	if (unlikely(tid >= MAX_TID_COUNT))
2236 		return -EINVAL;
2237 
2238 	if (il->stations[sta_id].tid[tid].agg.state != IL_AGG_OFF) {
2239 		IL_ERR("Start AGG when state is not IL_AGG_OFF !\n");
2240 		return -ENXIO;
2241 	}
2242 
2243 	txq_id = il4965_txq_ctx_activate_free(il);
2244 	if (txq_id == -1) {
2245 		IL_ERR("No free aggregation queue available\n");
2246 		return -ENXIO;
2247 	}
2248 
2249 	spin_lock_irqsave(&il->sta_lock, flags);
2250 	tid_data = &il->stations[sta_id].tid[tid];
2251 	*ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
2252 	tid_data->agg.txq_id = txq_id;
2253 	il_set_swq_id(&il->txq[txq_id], il4965_get_ac_from_tid(tid), txq_id);
2254 	spin_unlock_irqrestore(&il->sta_lock, flags);
2255 
2256 	ret = il4965_txq_agg_enable(il, txq_id, tx_fifo, sta_id, tid, *ssn);
2257 	if (ret)
2258 		return ret;
2259 
2260 	spin_lock_irqsave(&il->sta_lock, flags);
2261 	tid_data = &il->stations[sta_id].tid[tid];
2262 	if (tid_data->tfds_in_queue == 0) {
2263 		D_HT("HW queue is empty\n");
2264 		tid_data->agg.state = IL_AGG_ON;
2265 		ret = IEEE80211_AMPDU_TX_START_IMMEDIATE;
2266 	} else {
2267 		D_HT("HW queue is NOT empty: %d packets in HW queue\n",
2268 		     tid_data->tfds_in_queue);
2269 		tid_data->agg.state = IL_EMPTYING_HW_QUEUE_ADDBA;
2270 	}
2271 	spin_unlock_irqrestore(&il->sta_lock, flags);
2272 	return ret;
2273 }
2274 
2275 /*
2276  * txq_id must be greater than IL49_FIRST_AMPDU_QUEUE
2277  * il->lock must be held by the caller
2278  */
2279 static int
2280 il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo)
2281 {
2282 	if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
2283 	    (IL49_FIRST_AMPDU_QUEUE +
2284 	     il->cfg->num_of_ampdu_queues <= txq_id)) {
2285 		IL_WARN("queue number out of range: %d, must be %d to %d\n",
2286 			txq_id, IL49_FIRST_AMPDU_QUEUE,
2287 			IL49_FIRST_AMPDU_QUEUE +
2288 			il->cfg->num_of_ampdu_queues - 1);
2289 		return -EINVAL;
2290 	}
2291 
2292 	il4965_tx_queue_stop_scheduler(il, txq_id);
2293 
2294 	il_clear_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
2295 
2296 	il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
2297 	il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
2298 	/* supposes that ssn_idx is valid (!= 0xFFF) */
2299 	il4965_set_wr_ptrs(il, txq_id, ssn_idx);
2300 
2301 	il_clear_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id));
2302 	il_txq_ctx_deactivate(il, txq_id);
2303 	il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 0);
2304 
2305 	return 0;
2306 }
2307 
2308 int
2309 il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif,
2310 		   struct ieee80211_sta *sta, u16 tid)
2311 {
2312 	int tx_fifo_id, txq_id, sta_id, ssn;
2313 	struct il_tid_data *tid_data;
2314 	int write_ptr, read_ptr;
2315 	unsigned long flags;
2316 
2317 	/* FIXME: warning if tx_fifo_id not found ? */
2318 	tx_fifo_id = il4965_get_fifo_from_tid(tid);
2319 	if (unlikely(tx_fifo_id < 0))
2320 		return tx_fifo_id;
2321 
2322 	sta_id = il_sta_id(sta);
2323 
2324 	if (sta_id == IL_INVALID_STATION) {
2325 		IL_ERR("Invalid station for AGG tid %d\n", tid);
2326 		return -ENXIO;
2327 	}
2328 
2329 	spin_lock_irqsave(&il->sta_lock, flags);
2330 
2331 	tid_data = &il->stations[sta_id].tid[tid];
2332 	ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
2333 	txq_id = tid_data->agg.txq_id;
2334 
2335 	switch (il->stations[sta_id].tid[tid].agg.state) {
2336 	case IL_EMPTYING_HW_QUEUE_ADDBA:
2337 		/*
2338 		 * This can happen if the peer stops aggregation
2339 		 * again before we've had a chance to drain the
2340 		 * queue we selected previously, i.e. before the
2341 		 * session was really started completely.
2342 		 */
2343 		D_HT("AGG stop before setup done\n");
2344 		goto turn_off;
2345 	case IL_AGG_ON:
2346 		break;
2347 	default:
2348 		IL_WARN("Stopping AGG while state not ON or starting\n");
2349 	}
2350 
2351 	write_ptr = il->txq[txq_id].q.write_ptr;
2352 	read_ptr = il->txq[txq_id].q.read_ptr;
2353 
2354 	/* The queue is not empty */
2355 	if (write_ptr != read_ptr) {
2356 		D_HT("Stopping a non empty AGG HW QUEUE\n");
2357 		il->stations[sta_id].tid[tid].agg.state =
2358 		    IL_EMPTYING_HW_QUEUE_DELBA;
2359 		spin_unlock_irqrestore(&il->sta_lock, flags);
2360 		return 0;
2361 	}
2362 
2363 	D_HT("HW queue is empty\n");
2364 turn_off:
2365 	il->stations[sta_id].tid[tid].agg.state = IL_AGG_OFF;
2366 
2367 	/* do not restore/save irqs */
2368 	spin_unlock(&il->sta_lock);
2369 	spin_lock(&il->lock);
2370 
2371 	/*
2372 	 * the only reason this call can fail is queue number out of range,
2373 	 * which can happen if uCode is reloaded and all the station
2374 	 * information are lost. if it is outside the range, there is no need
2375 	 * to deactivate the uCode queue, just return "success" to allow
2376 	 *  mac80211 to clean up it own data.
2377 	 */
2378 	il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo_id);
2379 	spin_unlock_irqrestore(&il->lock, flags);
2380 
2381 	ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
2382 
2383 	return 0;
2384 }
2385 
2386 int
2387 il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id)
2388 {
2389 	struct il_queue *q = &il->txq[txq_id].q;
2390 	u8 *addr = il->stations[sta_id].sta.sta.addr;
2391 	struct il_tid_data *tid_data = &il->stations[sta_id].tid[tid];
2392 
2393 	lockdep_assert_held(&il->sta_lock);
2394 
2395 	switch (il->stations[sta_id].tid[tid].agg.state) {
2396 	case IL_EMPTYING_HW_QUEUE_DELBA:
2397 		/* We are reclaiming the last packet of the */
2398 		/* aggregated HW queue */
2399 		if (txq_id == tid_data->agg.txq_id &&
2400 		    q->read_ptr == q->write_ptr) {
2401 			u16 ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
2402 			int tx_fifo = il4965_get_fifo_from_tid(tid);
2403 			D_HT("HW queue empty: continue DELBA flow\n");
2404 			il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo);
2405 			tid_data->agg.state = IL_AGG_OFF;
2406 			ieee80211_stop_tx_ba_cb_irqsafe(il->vif, addr, tid);
2407 		}
2408 		break;
2409 	case IL_EMPTYING_HW_QUEUE_ADDBA:
2410 		/* We are reclaiming the last packet of the queue */
2411 		if (tid_data->tfds_in_queue == 0) {
2412 			D_HT("HW queue empty: continue ADDBA flow\n");
2413 			tid_data->agg.state = IL_AGG_ON;
2414 			ieee80211_start_tx_ba_cb_irqsafe(il->vif, addr, tid);
2415 		}
2416 		break;
2417 	}
2418 
2419 	return 0;
2420 }
2421 
2422 static void
2423 il4965_non_agg_tx_status(struct il_priv *il, const u8 *addr1)
2424 {
2425 	struct ieee80211_sta *sta;
2426 	struct il_station_priv *sta_priv;
2427 
2428 	rcu_read_lock();
2429 	sta = ieee80211_find_sta(il->vif, addr1);
2430 	if (sta) {
2431 		sta_priv = (void *)sta->drv_priv;
2432 		/* avoid atomic ops if this isn't a client */
2433 		if (sta_priv->client &&
2434 		    atomic_dec_return(&sta_priv->pending_frames) == 0)
2435 			ieee80211_sta_block_awake(il->hw, sta, false);
2436 	}
2437 	rcu_read_unlock();
2438 }
2439 
2440 static void
2441 il4965_tx_status(struct il_priv *il, struct sk_buff *skb, bool is_agg)
2442 {
2443 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
2444 
2445 	if (!is_agg)
2446 		il4965_non_agg_tx_status(il, hdr->addr1);
2447 
2448 	ieee80211_tx_status_irqsafe(il->hw, skb);
2449 }
2450 
2451 int
2452 il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
2453 {
2454 	struct il_tx_queue *txq = &il->txq[txq_id];
2455 	struct il_queue *q = &txq->q;
2456 	int nfreed = 0;
2457 	struct ieee80211_hdr *hdr;
2458 	struct sk_buff *skb;
2459 
2460 	if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
2461 		IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
2462 		       "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd,
2463 		       q->write_ptr, q->read_ptr);
2464 		return 0;
2465 	}
2466 
2467 	for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
2468 	     q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
2469 
2470 		skb = txq->skbs[txq->q.read_ptr];
2471 
2472 		if (WARN_ON_ONCE(skb == NULL))
2473 			continue;
2474 
2475 		hdr = (struct ieee80211_hdr *) skb->data;
2476 		if (ieee80211_is_data_qos(hdr->frame_control))
2477 			nfreed++;
2478 
2479 		il4965_tx_status(il, skb, txq_id >= IL4965_FIRST_AMPDU_QUEUE);
2480 
2481 		txq->skbs[txq->q.read_ptr] = NULL;
2482 		il->ops->txq_free_tfd(il, txq);
2483 	}
2484 	return nfreed;
2485 }
2486 
2487 /*
2488  * il4965_tx_status_reply_compressed_ba - Update tx status from block-ack
2489  *
2490  * Go through block-ack's bitmap of ACK'd frames, update driver's record of
2491  * ACK vs. not.  This gets sent to mac80211, then to rate scaling algo.
2492  */
2493 static int
2494 il4965_tx_status_reply_compressed_ba(struct il_priv *il, struct il_ht_agg *agg,
2495 				     struct il_compressed_ba_resp *ba_resp)
2496 {
2497 	int i, sh, ack;
2498 	u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
2499 	u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
2500 	int successes = 0;
2501 	struct ieee80211_tx_info *info;
2502 	u64 bitmap, sent_bitmap;
2503 
2504 	if (unlikely(!agg->wait_for_ba)) {
2505 		if (unlikely(ba_resp->bitmap))
2506 			IL_ERR("Received BA when not expected\n");
2507 		return -EINVAL;
2508 	}
2509 
2510 	/* Mark that the expected block-ack response arrived */
2511 	agg->wait_for_ba = 0;
2512 	D_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl);
2513 
2514 	/* Calculate shift to align block-ack bits with our Tx win bits */
2515 	sh = agg->start_idx - SEQ_TO_IDX(seq_ctl >> 4);
2516 	if (sh < 0)		/* tbw something is wrong with indices */
2517 		sh += 0x100;
2518 
2519 	if (agg->frame_count > (64 - sh)) {
2520 		D_TX_REPLY("more frames than bitmap size");
2521 		return -1;
2522 	}
2523 
2524 	/* don't use 64-bit values for now */
2525 	bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
2526 
2527 	/* check for success or failure according to the
2528 	 * transmitted bitmap and block-ack bitmap */
2529 	sent_bitmap = bitmap & agg->bitmap;
2530 
2531 	/* For each frame attempted in aggregation,
2532 	 * update driver's record of tx frame's status. */
2533 	i = 0;
2534 	while (sent_bitmap) {
2535 		ack = sent_bitmap & 1ULL;
2536 		successes += ack;
2537 		D_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack ? "ACK" : "NACK",
2538 			   i, (agg->start_idx + i) & 0xff, agg->start_idx + i);
2539 		sent_bitmap >>= 1;
2540 		++i;
2541 	}
2542 
2543 	D_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap);
2544 
2545 	info = IEEE80211_SKB_CB(il->txq[scd_flow].skbs[agg->start_idx]);
2546 	memset(&info->status, 0, sizeof(info->status));
2547 	info->flags |= IEEE80211_TX_STAT_ACK;
2548 	info->flags |= IEEE80211_TX_STAT_AMPDU;
2549 	info->status.ampdu_ack_len = successes;
2550 	info->status.ampdu_len = agg->frame_count;
2551 	il4965_hwrate_to_tx_control(il, agg->rate_n_flags, info);
2552 
2553 	return 0;
2554 }
2555 
2556 static inline bool
2557 il4965_is_tx_success(u32 status)
2558 {
2559 	status &= TX_STATUS_MSK;
2560 	return (status == TX_STATUS_SUCCESS || status == TX_STATUS_DIRECT_DONE);
2561 }
2562 
2563 static u8
2564 il4965_find_station(struct il_priv *il, const u8 *addr)
2565 {
2566 	int i;
2567 	int start = 0;
2568 	int ret = IL_INVALID_STATION;
2569 	unsigned long flags;
2570 
2571 	if (il->iw_mode == NL80211_IFTYPE_ADHOC)
2572 		start = IL_STA_ID;
2573 
2574 	if (is_broadcast_ether_addr(addr))
2575 		return il->hw_params.bcast_id;
2576 
2577 	spin_lock_irqsave(&il->sta_lock, flags);
2578 	for (i = start; i < il->hw_params.max_stations; i++)
2579 		if (il->stations[i].used &&
2580 		    ether_addr_equal(il->stations[i].sta.sta.addr, addr)) {
2581 			ret = i;
2582 			goto out;
2583 		}
2584 
2585 	D_ASSOC("can not find STA %pM total %d\n", addr, il->num_stations);
2586 
2587 out:
2588 	/*
2589 	 * It may be possible that more commands interacting with stations
2590 	 * arrive before we completed processing the adding of
2591 	 * station
2592 	 */
2593 	if (ret != IL_INVALID_STATION &&
2594 	    (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) ||
2595 	      (il->stations[ret].used & IL_STA_UCODE_INPROGRESS))) {
2596 		IL_ERR("Requested station info for sta %d before ready.\n",
2597 		       ret);
2598 		ret = IL_INVALID_STATION;
2599 	}
2600 	spin_unlock_irqrestore(&il->sta_lock, flags);
2601 	return ret;
2602 }
2603 
2604 static int
2605 il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr)
2606 {
2607 	if (il->iw_mode == NL80211_IFTYPE_STATION)
2608 		return IL_AP_ID;
2609 	else {
2610 		u8 *da = ieee80211_get_DA(hdr);
2611 
2612 		return il4965_find_station(il, da);
2613 	}
2614 }
2615 
2616 static inline u32
2617 il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp)
2618 {
2619 	return le32_to_cpup(&tx_resp->u.status +
2620 			    tx_resp->frame_count) & IEEE80211_MAX_SN;
2621 }
2622 
2623 static inline u32
2624 il4965_tx_status_to_mac80211(u32 status)
2625 {
2626 	status &= TX_STATUS_MSK;
2627 
2628 	switch (status) {
2629 	case TX_STATUS_SUCCESS:
2630 	case TX_STATUS_DIRECT_DONE:
2631 		return IEEE80211_TX_STAT_ACK;
2632 	case TX_STATUS_FAIL_DEST_PS:
2633 		return IEEE80211_TX_STAT_TX_FILTERED;
2634 	default:
2635 		return 0;
2636 	}
2637 }
2638 
2639 /*
2640  * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
2641  */
2642 static int
2643 il4965_tx_status_reply_tx(struct il_priv *il, struct il_ht_agg *agg,
2644 			  struct il4965_tx_resp *tx_resp, int txq_id,
2645 			  u16 start_idx)
2646 {
2647 	u16 status;
2648 	struct agg_tx_status *frame_status = tx_resp->u.agg_status;
2649 	struct ieee80211_tx_info *info = NULL;
2650 	struct ieee80211_hdr *hdr = NULL;
2651 	u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
2652 	int i, sh, idx;
2653 	u16 seq;
2654 	if (agg->wait_for_ba)
2655 		D_TX_REPLY("got tx response w/o block-ack\n");
2656 
2657 	agg->frame_count = tx_resp->frame_count;
2658 	agg->start_idx = start_idx;
2659 	agg->rate_n_flags = rate_n_flags;
2660 	agg->bitmap = 0;
2661 
2662 	/* num frames attempted by Tx command */
2663 	if (agg->frame_count == 1) {
2664 		/* Only one frame was attempted; no block-ack will arrive */
2665 		status = le16_to_cpu(frame_status[0].status);
2666 		idx = start_idx;
2667 
2668 		D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
2669 			   agg->frame_count, agg->start_idx, idx);
2670 
2671 		info = IEEE80211_SKB_CB(il->txq[txq_id].skbs[idx]);
2672 		info->status.rates[0].count = tx_resp->failure_frame + 1;
2673 		info->flags &= ~IEEE80211_TX_CTL_AMPDU;
2674 		info->flags |= il4965_tx_status_to_mac80211(status);
2675 		il4965_hwrate_to_tx_control(il, rate_n_flags, info);
2676 
2677 		D_TX_REPLY("1 Frame 0x%x failure :%d\n", status & 0xff,
2678 			   tx_resp->failure_frame);
2679 		D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
2680 
2681 		agg->wait_for_ba = 0;
2682 	} else {
2683 		/* Two or more frames were attempted; expect block-ack */
2684 		u64 bitmap = 0;
2685 		int start = agg->start_idx;
2686 		struct sk_buff *skb;
2687 
2688 		/* Construct bit-map of pending frames within Tx win */
2689 		for (i = 0; i < agg->frame_count; i++) {
2690 			u16 sc;
2691 			status = le16_to_cpu(frame_status[i].status);
2692 			seq = le16_to_cpu(frame_status[i].sequence);
2693 			idx = SEQ_TO_IDX(seq);
2694 			txq_id = SEQ_TO_QUEUE(seq);
2695 
2696 			if (status &
2697 			    (AGG_TX_STATE_FEW_BYTES_MSK |
2698 			     AGG_TX_STATE_ABORT_MSK))
2699 				continue;
2700 
2701 			D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
2702 				   agg->frame_count, txq_id, idx);
2703 
2704 			skb = il->txq[txq_id].skbs[idx];
2705 			if (WARN_ON_ONCE(skb == NULL))
2706 				return -1;
2707 			hdr = (struct ieee80211_hdr *) skb->data;
2708 
2709 			sc = le16_to_cpu(hdr->seq_ctrl);
2710 			if (idx != (IEEE80211_SEQ_TO_SN(sc) & 0xff)) {
2711 				IL_ERR("BUG_ON idx doesn't match seq control"
2712 				       " idx=%d, seq_idx=%d, seq=%d\n", idx,
2713 				       IEEE80211_SEQ_TO_SN(sc), hdr->seq_ctrl);
2714 				return -1;
2715 			}
2716 
2717 			D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", i, idx,
2718 				   IEEE80211_SEQ_TO_SN(sc));
2719 
2720 			sh = idx - start;
2721 			if (sh > 64) {
2722 				sh = (start - idx) + 0xff;
2723 				bitmap = bitmap << sh;
2724 				sh = 0;
2725 				start = idx;
2726 			} else if (sh < -64)
2727 				sh = 0xff - (start - idx);
2728 			else if (sh < 0) {
2729 				sh = start - idx;
2730 				start = idx;
2731 				bitmap = bitmap << sh;
2732 				sh = 0;
2733 			}
2734 			bitmap |= 1ULL << sh;
2735 			D_TX_REPLY("start=%d bitmap=0x%llx\n", start,
2736 				   (unsigned long long)bitmap);
2737 		}
2738 
2739 		agg->bitmap = bitmap;
2740 		agg->start_idx = start;
2741 		D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
2742 			   agg->frame_count, agg->start_idx,
2743 			   (unsigned long long)agg->bitmap);
2744 
2745 		if (bitmap)
2746 			agg->wait_for_ba = 1;
2747 	}
2748 	return 0;
2749 }
2750 
2751 /*
2752  * il4965_hdl_tx - Handle standard (non-aggregation) Tx response
2753  */
2754 static void
2755 il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
2756 {
2757 	struct il_rx_pkt *pkt = rxb_addr(rxb);
2758 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
2759 	int txq_id = SEQ_TO_QUEUE(sequence);
2760 	int idx = SEQ_TO_IDX(sequence);
2761 	struct il_tx_queue *txq = &il->txq[txq_id];
2762 	struct sk_buff *skb;
2763 	struct ieee80211_hdr *hdr;
2764 	struct ieee80211_tx_info *info;
2765 	struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
2766 	u32 status = le32_to_cpu(tx_resp->u.status);
2767 	int tid;
2768 	int sta_id;
2769 	int freed;
2770 	u8 *qc = NULL;
2771 	unsigned long flags;
2772 
2773 	if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
2774 		IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
2775 		       "is out of range [0-%d] %d %d\n", txq_id, idx,
2776 		       txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr);
2777 		return;
2778 	}
2779 
2780 	txq->time_stamp = jiffies;
2781 
2782 	skb = txq->skbs[txq->q.read_ptr];
2783 	info = IEEE80211_SKB_CB(skb);
2784 	memset(&info->status, 0, sizeof(info->status));
2785 
2786 	hdr = (struct ieee80211_hdr *) skb->data;
2787 	if (ieee80211_is_data_qos(hdr->frame_control)) {
2788 		qc = ieee80211_get_qos_ctl(hdr);
2789 		tid = qc[0] & 0xf;
2790 	}
2791 
2792 	sta_id = il4965_get_ra_sta_id(il, hdr);
2793 	if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) {
2794 		IL_ERR("Station not known\n");
2795 		return;
2796 	}
2797 
2798 	/*
2799 	 * Firmware will not transmit frame on passive channel, if it not yet
2800 	 * received some valid frame on that channel. When this error happen
2801 	 * we have to wait until firmware will unblock itself i.e. when we
2802 	 * note received beacon or other frame. We unblock queues in
2803 	 * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed.
2804 	 */
2805 	if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) &&
2806 	    il->iw_mode == NL80211_IFTYPE_STATION) {
2807 		il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
2808 		D_INFO("Stopped queues - RX waiting on passive channel\n");
2809 	}
2810 
2811 	spin_lock_irqsave(&il->sta_lock, flags);
2812 	if (txq->sched_retry) {
2813 		const u32 scd_ssn = il4965_get_scd_ssn(tx_resp);
2814 		struct il_ht_agg *agg;
2815 
2816 		if (WARN_ON(!qc))
2817 			goto out;
2818 
2819 		agg = &il->stations[sta_id].tid[tid].agg;
2820 
2821 		il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx);
2822 
2823 		/* check if BAR is needed */
2824 		if (tx_resp->frame_count == 1 &&
2825 		    !il4965_is_tx_success(status))
2826 			info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
2827 
2828 		if (txq->q.read_ptr != (scd_ssn & 0xff)) {
2829 			idx = il_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
2830 			D_TX_REPLY("Retry scheduler reclaim scd_ssn "
2831 				   "%d idx %d\n", scd_ssn, idx);
2832 			freed = il4965_tx_queue_reclaim(il, txq_id, idx);
2833 			il4965_free_tfds_in_queue(il, sta_id, tid, freed);
2834 
2835 			if (il->mac80211_registered &&
2836 			    il_queue_space(&txq->q) > txq->q.low_mark &&
2837 			    agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
2838 				il_wake_queue(il, txq);
2839 		}
2840 	} else {
2841 		info->status.rates[0].count = tx_resp->failure_frame + 1;
2842 		info->flags |= il4965_tx_status_to_mac80211(status);
2843 		il4965_hwrate_to_tx_control(il,
2844 					    le32_to_cpu(tx_resp->rate_n_flags),
2845 					    info);
2846 
2847 		D_TX_REPLY("TXQ %d status %s (0x%08x) "
2848 			   "rate_n_flags 0x%x retries %d\n", txq_id,
2849 			   il4965_get_tx_fail_reason(status), status,
2850 			   le32_to_cpu(tx_resp->rate_n_flags),
2851 			   tx_resp->failure_frame);
2852 
2853 		freed = il4965_tx_queue_reclaim(il, txq_id, idx);
2854 		if (qc && likely(sta_id != IL_INVALID_STATION))
2855 			il4965_free_tfds_in_queue(il, sta_id, tid, freed);
2856 		else if (sta_id == IL_INVALID_STATION)
2857 			D_TX_REPLY("Station not known\n");
2858 
2859 		if (il->mac80211_registered &&
2860 		    il_queue_space(&txq->q) > txq->q.low_mark)
2861 			il_wake_queue(il, txq);
2862 	}
2863 out:
2864 	if (qc && likely(sta_id != IL_INVALID_STATION))
2865 		il4965_txq_check_empty(il, sta_id, tid, txq_id);
2866 
2867 	il4965_check_abort_status(il, tx_resp->frame_count, status);
2868 
2869 	spin_unlock_irqrestore(&il->sta_lock, flags);
2870 }
2871 
2872 /*
2873  * translate ucode response to mac80211 tx status control values
2874  */
2875 void
2876 il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags,
2877 			    struct ieee80211_tx_info *info)
2878 {
2879 	struct ieee80211_tx_rate *r = &info->status.rates[0];
2880 
2881 	info->status.antenna =
2882 	    ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
2883 	if (rate_n_flags & RATE_MCS_HT_MSK)
2884 		r->flags |= IEEE80211_TX_RC_MCS;
2885 	if (rate_n_flags & RATE_MCS_GF_MSK)
2886 		r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
2887 	if (rate_n_flags & RATE_MCS_HT40_MSK)
2888 		r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
2889 	if (rate_n_flags & RATE_MCS_DUP_MSK)
2890 		r->flags |= IEEE80211_TX_RC_DUP_DATA;
2891 	if (rate_n_flags & RATE_MCS_SGI_MSK)
2892 		r->flags |= IEEE80211_TX_RC_SHORT_GI;
2893 	r->idx = il4965_hwrate_to_mac80211_idx(rate_n_flags, info->band);
2894 }
2895 
2896 /*
2897  * il4965_hdl_compressed_ba - Handler for N_COMPRESSED_BA
2898  *
2899  * Handles block-acknowledge notification from device, which reports success
2900  * of frames sent via aggregation.
2901  */
2902 static void
2903 il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb)
2904 {
2905 	struct il_rx_pkt *pkt = rxb_addr(rxb);
2906 	struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
2907 	struct il_tx_queue *txq = NULL;
2908 	struct il_ht_agg *agg;
2909 	int idx;
2910 	int sta_id;
2911 	int tid;
2912 	unsigned long flags;
2913 
2914 	/* "flow" corresponds to Tx queue */
2915 	u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
2916 
2917 	/* "ssn" is start of block-ack Tx win, corresponds to idx
2918 	 * (in Tx queue's circular buffer) of first TFD/frame in win */
2919 	u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
2920 
2921 	if (scd_flow >= il->hw_params.max_txq_num) {
2922 		IL_ERR("BUG_ON scd_flow is bigger than number of queues\n");
2923 		return;
2924 	}
2925 
2926 	txq = &il->txq[scd_flow];
2927 	sta_id = ba_resp->sta_id;
2928 	tid = ba_resp->tid;
2929 	agg = &il->stations[sta_id].tid[tid].agg;
2930 	if (unlikely(agg->txq_id != scd_flow)) {
2931 		/*
2932 		 * FIXME: this is a uCode bug which need to be addressed,
2933 		 * log the information and return for now!
2934 		 * since it is possible happen very often and in order
2935 		 * not to fill the syslog, don't enable the logging by default
2936 		 */
2937 		D_TX_REPLY("BA scd_flow %d does not match txq_id %d\n",
2938 			   scd_flow, agg->txq_id);
2939 		return;
2940 	}
2941 
2942 	/* Find idx just before block-ack win */
2943 	idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
2944 
2945 	spin_lock_irqsave(&il->sta_lock, flags);
2946 
2947 	D_TX_REPLY("N_COMPRESSED_BA [%d] Received from %pM, " "sta_id = %d\n",
2948 		   agg->wait_for_ba, (u8 *) &ba_resp->sta_addr_lo32,
2949 		   ba_resp->sta_id);
2950 	D_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx," "scd_flow = "
2951 		   "%d, scd_ssn = %d\n", ba_resp->tid, ba_resp->seq_ctl,
2952 		   (unsigned long long)le64_to_cpu(ba_resp->bitmap),
2953 		   ba_resp->scd_flow, ba_resp->scd_ssn);
2954 	D_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx\n", agg->start_idx,
2955 		   (unsigned long long)agg->bitmap);
2956 
2957 	/* Update driver's record of ACK vs. not for each frame in win */
2958 	il4965_tx_status_reply_compressed_ba(il, agg, ba_resp);
2959 
2960 	/* Release all TFDs before the SSN, i.e. all TFDs in front of
2961 	 * block-ack win (we assume that they've been successfully
2962 	 * transmitted ... if not, it's too late anyway). */
2963 	if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
2964 		/* calculate mac80211 ampdu sw queue to wake */
2965 		int freed = il4965_tx_queue_reclaim(il, scd_flow, idx);
2966 		il4965_free_tfds_in_queue(il, sta_id, tid, freed);
2967 
2968 		if (il_queue_space(&txq->q) > txq->q.low_mark &&
2969 		    il->mac80211_registered &&
2970 		    agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
2971 			il_wake_queue(il, txq);
2972 
2973 		il4965_txq_check_empty(il, sta_id, tid, scd_flow);
2974 	}
2975 
2976 	spin_unlock_irqrestore(&il->sta_lock, flags);
2977 }
2978 
2979 #ifdef CONFIG_IWLEGACY_DEBUG
2980 const char *
2981 il4965_get_tx_fail_reason(u32 status)
2982 {
2983 #define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x
2984 #define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x
2985 
2986 	switch (status & TX_STATUS_MSK) {
2987 	case TX_STATUS_SUCCESS:
2988 		return "SUCCESS";
2989 		TX_STATUS_POSTPONE(DELAY);
2990 		TX_STATUS_POSTPONE(FEW_BYTES);
2991 		TX_STATUS_POSTPONE(QUIET_PERIOD);
2992 		TX_STATUS_POSTPONE(CALC_TTAK);
2993 		TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY);
2994 		TX_STATUS_FAIL(SHORT_LIMIT);
2995 		TX_STATUS_FAIL(LONG_LIMIT);
2996 		TX_STATUS_FAIL(FIFO_UNDERRUN);
2997 		TX_STATUS_FAIL(DRAIN_FLOW);
2998 		TX_STATUS_FAIL(RFKILL_FLUSH);
2999 		TX_STATUS_FAIL(LIFE_EXPIRE);
3000 		TX_STATUS_FAIL(DEST_PS);
3001 		TX_STATUS_FAIL(HOST_ABORTED);
3002 		TX_STATUS_FAIL(BT_RETRY);
3003 		TX_STATUS_FAIL(STA_INVALID);
3004 		TX_STATUS_FAIL(FRAG_DROPPED);
3005 		TX_STATUS_FAIL(TID_DISABLE);
3006 		TX_STATUS_FAIL(FIFO_FLUSHED);
3007 		TX_STATUS_FAIL(INSUFFICIENT_CF_POLL);
3008 		TX_STATUS_FAIL(PASSIVE_NO_RX);
3009 		TX_STATUS_FAIL(NO_BEACON_ON_RADAR);
3010 	}
3011 
3012 	return "UNKNOWN";
3013 
3014 #undef TX_STATUS_FAIL
3015 #undef TX_STATUS_POSTPONE
3016 }
3017 #endif /* CONFIG_IWLEGACY_DEBUG */
3018 
3019 static struct il_link_quality_cmd *
3020 il4965_sta_alloc_lq(struct il_priv *il, u8 sta_id)
3021 {
3022 	int i, r;
3023 	struct il_link_quality_cmd *link_cmd;
3024 	u32 rate_flags = 0;
3025 	__le32 rate_n_flags;
3026 
3027 	link_cmd = kzalloc(sizeof(struct il_link_quality_cmd), GFP_KERNEL);
3028 	if (!link_cmd) {
3029 		IL_ERR("Unable to allocate memory for LQ cmd.\n");
3030 		return NULL;
3031 	}
3032 	/* Set up the rate scaling to start at selected rate, fall back
3033 	 * all the way down to 1M in IEEE order, and then spin on 1M */
3034 	if (il->band == NL80211_BAND_5GHZ)
3035 		r = RATE_6M_IDX;
3036 	else
3037 		r = RATE_1M_IDX;
3038 
3039 	if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE)
3040 		rate_flags |= RATE_MCS_CCK_MSK;
3041 
3042 	rate_flags |=
3043 	    il4965_first_antenna(il->hw_params.
3044 				 valid_tx_ant) << RATE_MCS_ANT_POS;
3045 	rate_n_flags = cpu_to_le32(il_rates[r].plcp | rate_flags);
3046 	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
3047 		link_cmd->rs_table[i].rate_n_flags = rate_n_flags;
3048 
3049 	link_cmd->general_params.single_stream_ant_msk =
3050 	    il4965_first_antenna(il->hw_params.valid_tx_ant);
3051 
3052 	link_cmd->general_params.dual_stream_ant_msk =
3053 	    il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params.
3054 							       valid_tx_ant);
3055 	if (!link_cmd->general_params.dual_stream_ant_msk) {
3056 		link_cmd->general_params.dual_stream_ant_msk = ANT_AB;
3057 	} else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) {
3058 		link_cmd->general_params.dual_stream_ant_msk =
3059 		    il->hw_params.valid_tx_ant;
3060 	}
3061 
3062 	link_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
3063 	link_cmd->agg_params.agg_time_limit =
3064 	    cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
3065 
3066 	link_cmd->sta_id = sta_id;
3067 
3068 	return link_cmd;
3069 }
3070 
3071 /*
3072  * il4965_add_bssid_station - Add the special IBSS BSSID station
3073  *
3074  * Function sleeps.
3075  */
3076 int
3077 il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r)
3078 {
3079 	int ret;
3080 	u8 sta_id;
3081 	struct il_link_quality_cmd *link_cmd;
3082 	unsigned long flags;
3083 
3084 	if (sta_id_r)
3085 		*sta_id_r = IL_INVALID_STATION;
3086 
3087 	ret = il_add_station_common(il, addr, 0, NULL, &sta_id);
3088 	if (ret) {
3089 		IL_ERR("Unable to add station %pM\n", addr);
3090 		return ret;
3091 	}
3092 
3093 	if (sta_id_r)
3094 		*sta_id_r = sta_id;
3095 
3096 	spin_lock_irqsave(&il->sta_lock, flags);
3097 	il->stations[sta_id].used |= IL_STA_LOCAL;
3098 	spin_unlock_irqrestore(&il->sta_lock, flags);
3099 
3100 	/* Set up default rate scaling table in device's station table */
3101 	link_cmd = il4965_sta_alloc_lq(il, sta_id);
3102 	if (!link_cmd) {
3103 		IL_ERR("Unable to initialize rate scaling for station %pM.\n",
3104 		       addr);
3105 		return -ENOMEM;
3106 	}
3107 
3108 	ret = il_send_lq_cmd(il, link_cmd, CMD_SYNC, true);
3109 	if (ret)
3110 		IL_ERR("Link quality command failed (%d)\n", ret);
3111 
3112 	spin_lock_irqsave(&il->sta_lock, flags);
3113 	il->stations[sta_id].lq = link_cmd;
3114 	spin_unlock_irqrestore(&il->sta_lock, flags);
3115 
3116 	return 0;
3117 }
3118 
3119 static int
3120 il4965_static_wepkey_cmd(struct il_priv *il, bool send_if_empty)
3121 {
3122 	int i;
3123 	u8 buff[sizeof(struct il_wep_cmd) +
3124 		sizeof(struct il_wep_key) * WEP_KEYS_MAX];
3125 	struct il_wep_cmd *wep_cmd = (struct il_wep_cmd *)buff;
3126 	size_t cmd_size = sizeof(struct il_wep_cmd);
3127 	struct il_host_cmd cmd = {
3128 		.id = C_WEPKEY,
3129 		.data = wep_cmd,
3130 		.flags = CMD_SYNC,
3131 	};
3132 	bool not_empty = false;
3133 
3134 	might_sleep();
3135 
3136 	memset(wep_cmd, 0,
3137 	       cmd_size + (sizeof(struct il_wep_key) * WEP_KEYS_MAX));
3138 
3139 	for (i = 0; i < WEP_KEYS_MAX; i++) {
3140 		u8 key_size = il->_4965.wep_keys[i].key_size;
3141 
3142 		wep_cmd->key[i].key_idx = i;
3143 		if (key_size) {
3144 			wep_cmd->key[i].key_offset = i;
3145 			not_empty = true;
3146 		} else
3147 			wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET;
3148 
3149 		wep_cmd->key[i].key_size = key_size;
3150 		memcpy(&wep_cmd->key[i].key[3], il->_4965.wep_keys[i].key, key_size);
3151 	}
3152 
3153 	wep_cmd->global_key_type = WEP_KEY_WEP_TYPE;
3154 	wep_cmd->num_keys = WEP_KEYS_MAX;
3155 
3156 	cmd_size += sizeof(struct il_wep_key) * WEP_KEYS_MAX;
3157 	cmd.len = cmd_size;
3158 
3159 	if (not_empty || send_if_empty)
3160 		return il_send_cmd(il, &cmd);
3161 	else
3162 		return 0;
3163 }
3164 
3165 int
3166 il4965_restore_default_wep_keys(struct il_priv *il)
3167 {
3168 	lockdep_assert_held(&il->mutex);
3169 
3170 	return il4965_static_wepkey_cmd(il, false);
3171 }
3172 
3173 int
3174 il4965_remove_default_wep_key(struct il_priv *il,
3175 			      struct ieee80211_key_conf *keyconf)
3176 {
3177 	int ret;
3178 	int idx = keyconf->keyidx;
3179 
3180 	lockdep_assert_held(&il->mutex);
3181 
3182 	D_WEP("Removing default WEP key: idx=%d\n", idx);
3183 
3184 	memset(&il->_4965.wep_keys[idx], 0, sizeof(struct il_wep_key));
3185 	if (il_is_rfkill(il)) {
3186 		D_WEP("Not sending C_WEPKEY command due to RFKILL.\n");
3187 		/* but keys in device are clear anyway so return success */
3188 		return 0;
3189 	}
3190 	ret = il4965_static_wepkey_cmd(il, 1);
3191 	D_WEP("Remove default WEP key: idx=%d ret=%d\n", idx, ret);
3192 
3193 	return ret;
3194 }
3195 
3196 int
3197 il4965_set_default_wep_key(struct il_priv *il,
3198 			   struct ieee80211_key_conf *keyconf)
3199 {
3200 	int ret;
3201 	int len = keyconf->keylen;
3202 	int idx = keyconf->keyidx;
3203 
3204 	lockdep_assert_held(&il->mutex);
3205 
3206 	if (len != WEP_KEY_LEN_128 && len != WEP_KEY_LEN_64) {
3207 		D_WEP("Bad WEP key length %d\n", keyconf->keylen);
3208 		return -EINVAL;
3209 	}
3210 
3211 	keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV;
3212 	keyconf->hw_key_idx = HW_KEY_DEFAULT;
3213 	il->stations[IL_AP_ID].keyinfo.cipher = keyconf->cipher;
3214 
3215 	il->_4965.wep_keys[idx].key_size = len;
3216 	memcpy(&il->_4965.wep_keys[idx].key, &keyconf->key, len);
3217 
3218 	ret = il4965_static_wepkey_cmd(il, false);
3219 
3220 	D_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", len, idx, ret);
3221 	return ret;
3222 }
3223 
3224 static int
3225 il4965_set_wep_dynamic_key_info(struct il_priv *il,
3226 				struct ieee80211_key_conf *keyconf, u8 sta_id)
3227 {
3228 	unsigned long flags;
3229 	__le16 key_flags = 0;
3230 	struct il_addsta_cmd sta_cmd;
3231 
3232 	lockdep_assert_held(&il->mutex);
3233 
3234 	keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV;
3235 
3236 	key_flags |= (STA_KEY_FLG_WEP | STA_KEY_FLG_MAP_KEY_MSK);
3237 	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
3238 	key_flags &= ~STA_KEY_FLG_INVALID;
3239 
3240 	if (keyconf->keylen == WEP_KEY_LEN_128)
3241 		key_flags |= STA_KEY_FLG_KEY_SIZE_MSK;
3242 
3243 	if (sta_id == il->hw_params.bcast_id)
3244 		key_flags |= STA_KEY_MULTICAST_MSK;
3245 
3246 	spin_lock_irqsave(&il->sta_lock, flags);
3247 
3248 	il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
3249 	il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
3250 	il->stations[sta_id].keyinfo.keyidx = keyconf->keyidx;
3251 
3252 	memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
3253 
3254 	memcpy(&il->stations[sta_id].sta.key.key[3], keyconf->key,
3255 	       keyconf->keylen);
3256 
3257 	if ((il->stations[sta_id].sta.key.
3258 	     key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
3259 		il->stations[sta_id].sta.key.key_offset =
3260 		    il_get_free_ucode_key_idx(il);
3261 	/* else, we are overriding an existing key => no need to allocated room
3262 	 * in uCode. */
3263 
3264 	WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
3265 	     "no space for a new key");
3266 
3267 	il->stations[sta_id].sta.key.key_flags = key_flags;
3268 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
3269 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3270 
3271 	memcpy(&sta_cmd, &il->stations[sta_id].sta,
3272 	       sizeof(struct il_addsta_cmd));
3273 	spin_unlock_irqrestore(&il->sta_lock, flags);
3274 
3275 	return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3276 }
3277 
3278 static int
3279 il4965_set_ccmp_dynamic_key_info(struct il_priv *il,
3280 				 struct ieee80211_key_conf *keyconf, u8 sta_id)
3281 {
3282 	unsigned long flags;
3283 	__le16 key_flags = 0;
3284 	struct il_addsta_cmd sta_cmd;
3285 
3286 	lockdep_assert_held(&il->mutex);
3287 
3288 	key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
3289 	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
3290 	key_flags &= ~STA_KEY_FLG_INVALID;
3291 
3292 	if (sta_id == il->hw_params.bcast_id)
3293 		key_flags |= STA_KEY_MULTICAST_MSK;
3294 
3295 	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
3296 
3297 	spin_lock_irqsave(&il->sta_lock, flags);
3298 	il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
3299 	il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
3300 
3301 	memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
3302 
3303 	memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
3304 
3305 	if ((il->stations[sta_id].sta.key.
3306 	     key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
3307 		il->stations[sta_id].sta.key.key_offset =
3308 		    il_get_free_ucode_key_idx(il);
3309 	/* else, we are overriding an existing key => no need to allocated room
3310 	 * in uCode. */
3311 
3312 	WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
3313 	     "no space for a new key");
3314 
3315 	il->stations[sta_id].sta.key.key_flags = key_flags;
3316 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
3317 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3318 
3319 	memcpy(&sta_cmd, &il->stations[sta_id].sta,
3320 	       sizeof(struct il_addsta_cmd));
3321 	spin_unlock_irqrestore(&il->sta_lock, flags);
3322 
3323 	return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3324 }
3325 
3326 static int
3327 il4965_set_tkip_dynamic_key_info(struct il_priv *il,
3328 				 struct ieee80211_key_conf *keyconf, u8 sta_id)
3329 {
3330 	unsigned long flags;
3331 	__le16 key_flags = 0;
3332 
3333 	key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
3334 	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
3335 	key_flags &= ~STA_KEY_FLG_INVALID;
3336 
3337 	if (sta_id == il->hw_params.bcast_id)
3338 		key_flags |= STA_KEY_MULTICAST_MSK;
3339 
3340 	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
3341 	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
3342 
3343 	spin_lock_irqsave(&il->sta_lock, flags);
3344 
3345 	il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
3346 	il->stations[sta_id].keyinfo.keylen = 16;
3347 
3348 	if ((il->stations[sta_id].sta.key.
3349 	     key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
3350 		il->stations[sta_id].sta.key.key_offset =
3351 		    il_get_free_ucode_key_idx(il);
3352 	/* else, we are overriding an existing key => no need to allocated room
3353 	 * in uCode. */
3354 
3355 	WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
3356 	     "no space for a new key");
3357 
3358 	il->stations[sta_id].sta.key.key_flags = key_flags;
3359 
3360 	/* This copy is acutally not needed: we get the key with each TX */
3361 	memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, 16);
3362 
3363 	memcpy(il->stations[sta_id].sta.key.key, keyconf->key, 16);
3364 
3365 	spin_unlock_irqrestore(&il->sta_lock, flags);
3366 
3367 	return 0;
3368 }
3369 
3370 void
3371 il4965_update_tkip_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
3372 		       struct ieee80211_sta *sta, u32 iv32, u16 *phase1key)
3373 {
3374 	u8 sta_id;
3375 	unsigned long flags;
3376 	int i;
3377 
3378 	if (il_scan_cancel(il)) {
3379 		/* cancel scan failed, just live w/ bad key and rely
3380 		   briefly on SW decryption */
3381 		return;
3382 	}
3383 
3384 	sta_id = il_sta_id_or_broadcast(il, sta);
3385 	if (sta_id == IL_INVALID_STATION)
3386 		return;
3387 
3388 	spin_lock_irqsave(&il->sta_lock, flags);
3389 
3390 	il->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32;
3391 
3392 	for (i = 0; i < 5; i++)
3393 		il->stations[sta_id].sta.key.tkip_rx_ttak[i] =
3394 		    cpu_to_le16(phase1key[i]);
3395 
3396 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
3397 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3398 
3399 	il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
3400 
3401 	spin_unlock_irqrestore(&il->sta_lock, flags);
3402 }
3403 
3404 int
3405 il4965_remove_dynamic_key(struct il_priv *il,
3406 			  struct ieee80211_key_conf *keyconf, u8 sta_id)
3407 {
3408 	unsigned long flags;
3409 	u16 key_flags;
3410 	u8 keyidx;
3411 	struct il_addsta_cmd sta_cmd;
3412 
3413 	lockdep_assert_held(&il->mutex);
3414 
3415 	il->_4965.key_mapping_keys--;
3416 
3417 	spin_lock_irqsave(&il->sta_lock, flags);
3418 	key_flags = le16_to_cpu(il->stations[sta_id].sta.key.key_flags);
3419 	keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3;
3420 
3421 	D_WEP("Remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id);
3422 
3423 	if (keyconf->keyidx != keyidx) {
3424 		/* We need to remove a key with idx different that the one
3425 		 * in the uCode. This means that the key we need to remove has
3426 		 * been replaced by another one with different idx.
3427 		 * Don't do anything and return ok
3428 		 */
3429 		spin_unlock_irqrestore(&il->sta_lock, flags);
3430 		return 0;
3431 	}
3432 
3433 	if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) {
3434 		IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx,
3435 			key_flags);
3436 		spin_unlock_irqrestore(&il->sta_lock, flags);
3437 		return 0;
3438 	}
3439 
3440 	if (!test_and_clear_bit
3441 	    (il->stations[sta_id].sta.key.key_offset, &il->ucode_key_table))
3442 		IL_ERR("idx %d not used in uCode key table.\n",
3443 		       il->stations[sta_id].sta.key.key_offset);
3444 	memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
3445 	memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
3446 	il->stations[sta_id].sta.key.key_flags =
3447 	    STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
3448 	il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx;
3449 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
3450 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3451 
3452 	if (il_is_rfkill(il)) {
3453 		D_WEP
3454 		    ("Not sending C_ADD_STA command because RFKILL enabled.\n");
3455 		spin_unlock_irqrestore(&il->sta_lock, flags);
3456 		return 0;
3457 	}
3458 	memcpy(&sta_cmd, &il->stations[sta_id].sta,
3459 	       sizeof(struct il_addsta_cmd));
3460 	spin_unlock_irqrestore(&il->sta_lock, flags);
3461 
3462 	return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3463 }
3464 
3465 int
3466 il4965_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
3467 		       u8 sta_id)
3468 {
3469 	int ret;
3470 
3471 	lockdep_assert_held(&il->mutex);
3472 
3473 	il->_4965.key_mapping_keys++;
3474 	keyconf->hw_key_idx = HW_KEY_DYNAMIC;
3475 
3476 	switch (keyconf->cipher) {
3477 	case WLAN_CIPHER_SUITE_CCMP:
3478 		ret =
3479 		    il4965_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
3480 		break;
3481 	case WLAN_CIPHER_SUITE_TKIP:
3482 		ret =
3483 		    il4965_set_tkip_dynamic_key_info(il, keyconf, sta_id);
3484 		break;
3485 	case WLAN_CIPHER_SUITE_WEP40:
3486 	case WLAN_CIPHER_SUITE_WEP104:
3487 		ret = il4965_set_wep_dynamic_key_info(il, keyconf, sta_id);
3488 		break;
3489 	default:
3490 		IL_ERR("Unknown alg: %s cipher = %x\n", __func__,
3491 		       keyconf->cipher);
3492 		ret = -EINVAL;
3493 	}
3494 
3495 	D_WEP("Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n",
3496 	      keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
3497 
3498 	return ret;
3499 }
3500 
3501 /*
3502  * il4965_alloc_bcast_station - add broadcast station into driver's station table.
3503  *
3504  * This adds the broadcast station into the driver's station table
3505  * and marks it driver active, so that it will be restored to the
3506  * device at the next best time.
3507  */
3508 int
3509 il4965_alloc_bcast_station(struct il_priv *il)
3510 {
3511 	struct il_link_quality_cmd *link_cmd;
3512 	unsigned long flags;
3513 	u8 sta_id;
3514 
3515 	spin_lock_irqsave(&il->sta_lock, flags);
3516 	sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
3517 	if (sta_id == IL_INVALID_STATION) {
3518 		IL_ERR("Unable to prepare broadcast station\n");
3519 		spin_unlock_irqrestore(&il->sta_lock, flags);
3520 
3521 		return -EINVAL;
3522 	}
3523 
3524 	il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
3525 	il->stations[sta_id].used |= IL_STA_BCAST;
3526 	spin_unlock_irqrestore(&il->sta_lock, flags);
3527 
3528 	link_cmd = il4965_sta_alloc_lq(il, sta_id);
3529 	if (!link_cmd) {
3530 		IL_ERR
3531 		    ("Unable to initialize rate scaling for bcast station.\n");
3532 		return -ENOMEM;
3533 	}
3534 
3535 	spin_lock_irqsave(&il->sta_lock, flags);
3536 	il->stations[sta_id].lq = link_cmd;
3537 	spin_unlock_irqrestore(&il->sta_lock, flags);
3538 
3539 	return 0;
3540 }
3541 
3542 /*
3543  * il4965_update_bcast_station - update broadcast station's LQ command
3544  *
3545  * Only used by iwl4965. Placed here to have all bcast station management
3546  * code together.
3547  */
3548 static int
3549 il4965_update_bcast_station(struct il_priv *il)
3550 {
3551 	unsigned long flags;
3552 	struct il_link_quality_cmd *link_cmd;
3553 	u8 sta_id = il->hw_params.bcast_id;
3554 
3555 	link_cmd = il4965_sta_alloc_lq(il, sta_id);
3556 	if (!link_cmd) {
3557 		IL_ERR("Unable to initialize rate scaling for bcast sta.\n");
3558 		return -ENOMEM;
3559 	}
3560 
3561 	spin_lock_irqsave(&il->sta_lock, flags);
3562 	if (il->stations[sta_id].lq)
3563 		kfree(il->stations[sta_id].lq);
3564 	else
3565 		D_INFO("Bcast sta rate scaling has not been initialized.\n");
3566 	il->stations[sta_id].lq = link_cmd;
3567 	spin_unlock_irqrestore(&il->sta_lock, flags);
3568 
3569 	return 0;
3570 }
3571 
3572 int
3573 il4965_update_bcast_stations(struct il_priv *il)
3574 {
3575 	return il4965_update_bcast_station(il);
3576 }
3577 
3578 /*
3579  * il4965_sta_tx_modify_enable_tid - Enable Tx for this TID in station table
3580  */
3581 int
3582 il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid)
3583 {
3584 	unsigned long flags;
3585 	struct il_addsta_cmd sta_cmd;
3586 
3587 	lockdep_assert_held(&il->mutex);
3588 
3589 	/* Remove "disable" flag, to enable Tx for this TID */
3590 	spin_lock_irqsave(&il->sta_lock, flags);
3591 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX;
3592 	il->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid));
3593 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3594 	memcpy(&sta_cmd, &il->stations[sta_id].sta,
3595 	       sizeof(struct il_addsta_cmd));
3596 	spin_unlock_irqrestore(&il->sta_lock, flags);
3597 
3598 	return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3599 }
3600 
3601 int
3602 il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, int tid,
3603 			u16 ssn)
3604 {
3605 	unsigned long flags;
3606 	int sta_id;
3607 	struct il_addsta_cmd sta_cmd;
3608 
3609 	lockdep_assert_held(&il->mutex);
3610 
3611 	sta_id = il_sta_id(sta);
3612 	if (sta_id == IL_INVALID_STATION)
3613 		return -ENXIO;
3614 
3615 	spin_lock_irqsave(&il->sta_lock, flags);
3616 	il->stations[sta_id].sta.station_flags_msk = 0;
3617 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK;
3618 	il->stations[sta_id].sta.add_immediate_ba_tid = (u8) tid;
3619 	il->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn);
3620 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3621 	memcpy(&sta_cmd, &il->stations[sta_id].sta,
3622 	       sizeof(struct il_addsta_cmd));
3623 	spin_unlock_irqrestore(&il->sta_lock, flags);
3624 
3625 	return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3626 }
3627 
3628 int
3629 il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, int tid)
3630 {
3631 	unsigned long flags;
3632 	int sta_id;
3633 	struct il_addsta_cmd sta_cmd;
3634 
3635 	lockdep_assert_held(&il->mutex);
3636 
3637 	sta_id = il_sta_id(sta);
3638 	if (sta_id == IL_INVALID_STATION) {
3639 		IL_ERR("Invalid station for AGG tid %d\n", tid);
3640 		return -ENXIO;
3641 	}
3642 
3643 	spin_lock_irqsave(&il->sta_lock, flags);
3644 	il->stations[sta_id].sta.station_flags_msk = 0;
3645 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK;
3646 	il->stations[sta_id].sta.remove_immediate_ba_tid = (u8) tid;
3647 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3648 	memcpy(&sta_cmd, &il->stations[sta_id].sta,
3649 	       sizeof(struct il_addsta_cmd));
3650 	spin_unlock_irqrestore(&il->sta_lock, flags);
3651 
3652 	return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
3653 }
3654 
3655 void
3656 il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt)
3657 {
3658 	unsigned long flags;
3659 
3660 	spin_lock_irqsave(&il->sta_lock, flags);
3661 	il->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK;
3662 	il->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK;
3663 	il->stations[sta_id].sta.sta.modify_mask =
3664 	    STA_MODIFY_SLEEP_TX_COUNT_MSK;
3665 	il->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt);
3666 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
3667 	il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
3668 	spin_unlock_irqrestore(&il->sta_lock, flags);
3669 
3670 }
3671 
3672 void
3673 il4965_update_chain_flags(struct il_priv *il)
3674 {
3675 	if (il->ops->set_rxon_chain) {
3676 		il->ops->set_rxon_chain(il);
3677 		if (il->active.rx_chain != il->staging.rx_chain)
3678 			il_commit_rxon(il);
3679 	}
3680 }
3681 
3682 static void
3683 il4965_clear_free_frames(struct il_priv *il)
3684 {
3685 	struct list_head *element;
3686 
3687 	D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
3688 
3689 	while (!list_empty(&il->free_frames)) {
3690 		element = il->free_frames.next;
3691 		list_del(element);
3692 		kfree(list_entry(element, struct il_frame, list));
3693 		il->frames_count--;
3694 	}
3695 
3696 	if (il->frames_count) {
3697 		IL_WARN("%d frames still in use.  Did we lose one?\n",
3698 			il->frames_count);
3699 		il->frames_count = 0;
3700 	}
3701 }
3702 
3703 static struct il_frame *
3704 il4965_get_free_frame(struct il_priv *il)
3705 {
3706 	struct il_frame *frame;
3707 	struct list_head *element;
3708 	if (list_empty(&il->free_frames)) {
3709 		frame = kzalloc(sizeof(*frame), GFP_KERNEL);
3710 		if (!frame) {
3711 			IL_ERR("Could not allocate frame!\n");
3712 			return NULL;
3713 		}
3714 
3715 		il->frames_count++;
3716 		return frame;
3717 	}
3718 
3719 	element = il->free_frames.next;
3720 	list_del(element);
3721 	return list_entry(element, struct il_frame, list);
3722 }
3723 
3724 static void
3725 il4965_free_frame(struct il_priv *il, struct il_frame *frame)
3726 {
3727 	memset(frame, 0, sizeof(*frame));
3728 	list_add(&frame->list, &il->free_frames);
3729 }
3730 
3731 static u32
3732 il4965_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
3733 			 int left)
3734 {
3735 	lockdep_assert_held(&il->mutex);
3736 
3737 	if (!il->beacon_skb)
3738 		return 0;
3739 
3740 	if (il->beacon_skb->len > left)
3741 		return 0;
3742 
3743 	memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
3744 
3745 	return il->beacon_skb->len;
3746 }
3747 
3748 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
3749 static void
3750 il4965_set_beacon_tim(struct il_priv *il,
3751 		      struct il_tx_beacon_cmd *tx_beacon_cmd, u8 * beacon,
3752 		      u32 frame_size)
3753 {
3754 	u16 tim_idx;
3755 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
3756 
3757 	/*
3758 	 * The idx is relative to frame start but we start looking at the
3759 	 * variable-length part of the beacon.
3760 	 */
3761 	tim_idx = mgmt->u.beacon.variable - beacon;
3762 
3763 	/* Parse variable-length elements of beacon to find WLAN_EID_TIM */
3764 	while ((tim_idx < (frame_size - 2)) &&
3765 	       (beacon[tim_idx] != WLAN_EID_TIM))
3766 		tim_idx += beacon[tim_idx + 1] + 2;
3767 
3768 	/* If TIM field was found, set variables */
3769 	if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
3770 		tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
3771 		tx_beacon_cmd->tim_size = beacon[tim_idx + 1];
3772 	} else
3773 		IL_WARN("Unable to find TIM Element in beacon\n");
3774 }
3775 
3776 static unsigned int
3777 il4965_hw_get_beacon_cmd(struct il_priv *il, struct il_frame *frame)
3778 {
3779 	struct il_tx_beacon_cmd *tx_beacon_cmd;
3780 	u32 frame_size;
3781 	u32 rate_flags;
3782 	u32 rate;
3783 	/*
3784 	 * We have to set up the TX command, the TX Beacon command, and the
3785 	 * beacon contents.
3786 	 */
3787 
3788 	lockdep_assert_held(&il->mutex);
3789 
3790 	if (!il->beacon_enabled) {
3791 		IL_ERR("Trying to build beacon without beaconing enabled\n");
3792 		return 0;
3793 	}
3794 
3795 	/* Initialize memory */
3796 	tx_beacon_cmd = &frame->u.beacon;
3797 	memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
3798 
3799 	/* Set up TX beacon contents */
3800 	frame_size =
3801 	    il4965_fill_beacon_frame(il, tx_beacon_cmd->frame,
3802 				     sizeof(frame->u) - sizeof(*tx_beacon_cmd));
3803 	if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
3804 		return 0;
3805 	if (!frame_size)
3806 		return 0;
3807 
3808 	/* Set up TX command fields */
3809 	tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size);
3810 	tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id;
3811 	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
3812 	tx_beacon_cmd->tx.tx_flags =
3813 	    TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK |
3814 	    TX_CMD_FLG_STA_RATE_MSK;
3815 
3816 	/* Set up TX beacon command fields */
3817 	il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *) tx_beacon_cmd->frame,
3818 			      frame_size);
3819 
3820 	/* Set up packet rate and flags */
3821 	rate = il_get_lowest_plcp(il);
3822 	il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant);
3823 	rate_flags = BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS;
3824 	if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE))
3825 		rate_flags |= RATE_MCS_CCK_MSK;
3826 	tx_beacon_cmd->tx.rate_n_flags = cpu_to_le32(rate | rate_flags);
3827 
3828 	return sizeof(*tx_beacon_cmd) + frame_size;
3829 }
3830 
3831 int
3832 il4965_send_beacon_cmd(struct il_priv *il)
3833 {
3834 	struct il_frame *frame;
3835 	unsigned int frame_size;
3836 	int rc;
3837 
3838 	frame = il4965_get_free_frame(il);
3839 	if (!frame) {
3840 		IL_ERR("Could not obtain free frame buffer for beacon "
3841 		       "command.\n");
3842 		return -ENOMEM;
3843 	}
3844 
3845 	frame_size = il4965_hw_get_beacon_cmd(il, frame);
3846 	if (!frame_size) {
3847 		IL_ERR("Error configuring the beacon command\n");
3848 		il4965_free_frame(il, frame);
3849 		return -EINVAL;
3850 	}
3851 
3852 	rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
3853 
3854 	il4965_free_frame(il, frame);
3855 
3856 	return rc;
3857 }
3858 
3859 static inline dma_addr_t
3860 il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx)
3861 {
3862 	struct il_tfd_tb *tb = &tfd->tbs[idx];
3863 
3864 	dma_addr_t addr = get_unaligned_le32(&tb->lo);
3865 	if (sizeof(dma_addr_t) > sizeof(u32))
3866 		addr |=
3867 		    ((dma_addr_t) (le16_to_cpu(tb->hi_n_len) & 0xF) << 16) <<
3868 		    16;
3869 
3870 	return addr;
3871 }
3872 
3873 static inline u16
3874 il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx)
3875 {
3876 	struct il_tfd_tb *tb = &tfd->tbs[idx];
3877 
3878 	return le16_to_cpu(tb->hi_n_len) >> 4;
3879 }
3880 
3881 static inline void
3882 il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx, dma_addr_t addr, u16 len)
3883 {
3884 	struct il_tfd_tb *tb = &tfd->tbs[idx];
3885 	u16 hi_n_len = len << 4;
3886 
3887 	put_unaligned_le32(addr, &tb->lo);
3888 	if (sizeof(dma_addr_t) > sizeof(u32))
3889 		hi_n_len |= ((addr >> 16) >> 16) & 0xF;
3890 
3891 	tb->hi_n_len = cpu_to_le16(hi_n_len);
3892 
3893 	tfd->num_tbs = idx + 1;
3894 }
3895 
3896 static inline u8
3897 il4965_tfd_get_num_tbs(struct il_tfd *tfd)
3898 {
3899 	return tfd->num_tbs & 0x1f;
3900 }
3901 
3902 /*
3903  * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
3904  *
3905  * Does NOT advance any TFD circular buffer read/write idxes
3906  * Does NOT free the TFD itself (which is within circular buffer)
3907  */
3908 void
3909 il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
3910 {
3911 	struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds;
3912 	struct il_tfd *tfd;
3913 	struct pci_dev *dev = il->pci_dev;
3914 	int idx = txq->q.read_ptr;
3915 	int i;
3916 	int num_tbs;
3917 
3918 	tfd = &tfd_tmp[idx];
3919 
3920 	/* Sanity check on number of chunks */
3921 	num_tbs = il4965_tfd_get_num_tbs(tfd);
3922 
3923 	if (num_tbs >= IL_NUM_OF_TBS) {
3924 		IL_ERR("Too many chunks: %i\n", num_tbs);
3925 		/* @todo issue fatal error, it is quite serious situation */
3926 		return;
3927 	}
3928 
3929 	/* Unmap tx_cmd */
3930 	if (num_tbs)
3931 		dma_unmap_single(&dev->dev,
3932 				 dma_unmap_addr(&txq->meta[idx], mapping),
3933 				 dma_unmap_len(&txq->meta[idx], len),
3934 				 DMA_BIDIRECTIONAL);
3935 
3936 	/* Unmap chunks, if any. */
3937 	for (i = 1; i < num_tbs; i++)
3938 		dma_unmap_single(&dev->dev, il4965_tfd_tb_get_addr(tfd, i),
3939 				 il4965_tfd_tb_get_len(tfd, i), DMA_TO_DEVICE);
3940 
3941 	/* free SKB */
3942 	if (txq->skbs) {
3943 		struct sk_buff *skb = txq->skbs[txq->q.read_ptr];
3944 
3945 		/* can be called from irqs-disabled context */
3946 		if (skb) {
3947 			dev_kfree_skb_any(skb);
3948 			txq->skbs[txq->q.read_ptr] = NULL;
3949 		}
3950 	}
3951 }
3952 
3953 int
3954 il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
3955 				dma_addr_t addr, u16 len, u8 reset, u8 pad)
3956 {
3957 	struct il_queue *q;
3958 	struct il_tfd *tfd, *tfd_tmp;
3959 	u32 num_tbs;
3960 
3961 	q = &txq->q;
3962 	tfd_tmp = (struct il_tfd *)txq->tfds;
3963 	tfd = &tfd_tmp[q->write_ptr];
3964 
3965 	if (reset)
3966 		memset(tfd, 0, sizeof(*tfd));
3967 
3968 	num_tbs = il4965_tfd_get_num_tbs(tfd);
3969 
3970 	/* Each TFD can point to a maximum 20 Tx buffers */
3971 	if (num_tbs >= IL_NUM_OF_TBS) {
3972 		IL_ERR("Error can not send more than %d chunks\n",
3973 		       IL_NUM_OF_TBS);
3974 		return -EINVAL;
3975 	}
3976 
3977 	BUG_ON(addr & ~DMA_BIT_MASK(36));
3978 	if (unlikely(addr & ~IL_TX_DMA_MASK))
3979 		IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr);
3980 
3981 	il4965_tfd_set_tb(tfd, num_tbs, addr, len);
3982 
3983 	return 0;
3984 }
3985 
3986 /*
3987  * Tell nic where to find circular buffer of Tx Frame Descriptors for
3988  * given Tx queue, and enable the DMA channel used for that queue.
3989  *
3990  * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
3991  * channels supported in hardware.
3992  */
3993 int
3994 il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
3995 {
3996 	int txq_id = txq->q.id;
3997 
3998 	/* Circular buffer (TFD queue in DRAM) physical base address */
3999 	il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8);
4000 
4001 	return 0;
4002 }
4003 
4004 /******************************************************************************
4005  *
4006  * Generic RX handler implementations
4007  *
4008  ******************************************************************************/
4009 static void
4010 il4965_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
4011 {
4012 	struct il_rx_pkt *pkt = rxb_addr(rxb);
4013 	struct il_alive_resp *palive;
4014 	struct delayed_work *pwork;
4015 
4016 	palive = &pkt->u.alive_frame;
4017 
4018 	D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
4019 	       palive->is_valid, palive->ver_type, palive->ver_subtype);
4020 
4021 	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
4022 		D_INFO("Initialization Alive received.\n");
4023 		memcpy(&il->card_alive_init, &pkt->u.alive_frame,
4024 		       sizeof(struct il_init_alive_resp));
4025 		pwork = &il->init_alive_start;
4026 	} else {
4027 		D_INFO("Runtime Alive received.\n");
4028 		memcpy(&il->card_alive, &pkt->u.alive_frame,
4029 		       sizeof(struct il_alive_resp));
4030 		pwork = &il->alive_start;
4031 	}
4032 
4033 	/* We delay the ALIVE response by 5ms to
4034 	 * give the HW RF Kill time to activate... */
4035 	if (palive->is_valid == UCODE_VALID_OK)
4036 		queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
4037 	else
4038 		IL_WARN("uCode did not respond OK.\n");
4039 }
4040 
4041 /*
4042  * il4965_bg_stats_periodic - Timer callback to queue stats
4043  *
4044  * This callback is provided in order to send a stats request.
4045  *
4046  * This timer function is continually reset to execute within
4047  * 60 seconds since the last N_STATS was received.  We need to
4048  * ensure we receive the stats in order to update the temperature
4049  * used for calibrating the TXPOWER.
4050  */
4051 static void
4052 il4965_bg_stats_periodic(struct timer_list *t)
4053 {
4054 	struct il_priv *il = from_timer(il, t, stats_periodic);
4055 
4056 	if (test_bit(S_EXIT_PENDING, &il->status))
4057 		return;
4058 
4059 	/* dont send host command if rf-kill is on */
4060 	if (!il_is_ready_rf(il))
4061 		return;
4062 
4063 	il_send_stats_request(il, CMD_ASYNC, false);
4064 }
4065 
4066 static void
4067 il4965_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
4068 {
4069 	struct il_rx_pkt *pkt = rxb_addr(rxb);
4070 	struct il4965_beacon_notif *beacon =
4071 	    (struct il4965_beacon_notif *)pkt->u.raw;
4072 #ifdef CONFIG_IWLEGACY_DEBUG
4073 	u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
4074 
4075 	D_RX("beacon status %x retries %d iss %d tsf:0x%.8x%.8x rate %d\n",
4076 	     le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
4077 	     beacon->beacon_notify_hdr.failure_frame,
4078 	     le32_to_cpu(beacon->ibss_mgr_status),
4079 	     le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
4080 #endif
4081 	il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
4082 }
4083 
4084 static void
4085 il4965_perform_ct_kill_task(struct il_priv *il)
4086 {
4087 	unsigned long flags;
4088 
4089 	D_POWER("Stop all queues\n");
4090 
4091 	if (il->mac80211_registered)
4092 		ieee80211_stop_queues(il->hw);
4093 
4094 	_il_wr(il, CSR_UCODE_DRV_GP1_SET,
4095 	       CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
4096 	_il_rd(il, CSR_UCODE_DRV_GP1);
4097 
4098 	spin_lock_irqsave(&il->reg_lock, flags);
4099 	if (likely(_il_grab_nic_access(il)))
4100 		_il_release_nic_access(il);
4101 	spin_unlock_irqrestore(&il->reg_lock, flags);
4102 }
4103 
4104 /* Handle notification from uCode that card's power state is changing
4105  * due to software, hardware, or critical temperature RFKILL */
4106 static void
4107 il4965_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
4108 {
4109 	struct il_rx_pkt *pkt = rxb_addr(rxb);
4110 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
4111 	unsigned long status = il->status;
4112 
4113 	D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n",
4114 		  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
4115 		  (flags & SW_CARD_DISABLED) ? "Kill" : "On",
4116 		  (flags & CT_CARD_DISABLED) ? "Reached" : "Not reached");
4117 
4118 	if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | CT_CARD_DISABLED)) {
4119 
4120 		_il_wr(il, CSR_UCODE_DRV_GP1_SET,
4121 		       CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
4122 
4123 		il_wr(il, HBUS_TARG_MBX_C, HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
4124 
4125 		if (!(flags & RXON_CARD_DISABLED)) {
4126 			_il_wr(il, CSR_UCODE_DRV_GP1_CLR,
4127 			       CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
4128 			il_wr(il, HBUS_TARG_MBX_C,
4129 			      HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
4130 		}
4131 	}
4132 
4133 	if (flags & CT_CARD_DISABLED)
4134 		il4965_perform_ct_kill_task(il);
4135 
4136 	if (flags & HW_CARD_DISABLED)
4137 		set_bit(S_RFKILL, &il->status);
4138 	else
4139 		clear_bit(S_RFKILL, &il->status);
4140 
4141 	if (!(flags & RXON_CARD_DISABLED))
4142 		il_scan_cancel(il);
4143 
4144 	if ((test_bit(S_RFKILL, &status) !=
4145 	     test_bit(S_RFKILL, &il->status)))
4146 		wiphy_rfkill_set_hw_state(il->hw->wiphy,
4147 					  test_bit(S_RFKILL, &il->status));
4148 	else
4149 		wake_up(&il->wait_command_queue);
4150 }
4151 
4152 /*
4153  * il4965_setup_handlers - Initialize Rx handler callbacks
4154  *
4155  * Setup the RX handlers for each of the reply types sent from the uCode
4156  * to the host.
4157  *
4158  * This function chains into the hardware specific files for them to setup
4159  * any hardware specific handlers as well.
4160  */
4161 static void
4162 il4965_setup_handlers(struct il_priv *il)
4163 {
4164 	il->handlers[N_ALIVE] = il4965_hdl_alive;
4165 	il->handlers[N_ERROR] = il_hdl_error;
4166 	il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
4167 	il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
4168 	il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
4169 	il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
4170 	il->handlers[N_BEACON] = il4965_hdl_beacon;
4171 
4172 	/*
4173 	 * The same handler is used for both the REPLY to a discrete
4174 	 * stats request from the host as well as for the periodic
4175 	 * stats notifications (after received beacons) from the uCode.
4176 	 */
4177 	il->handlers[C_STATS] = il4965_hdl_c_stats;
4178 	il->handlers[N_STATS] = il4965_hdl_stats;
4179 
4180 	il_setup_rx_scan_handlers(il);
4181 
4182 	/* status change handler */
4183 	il->handlers[N_CARD_STATE] = il4965_hdl_card_state;
4184 
4185 	il->handlers[N_MISSED_BEACONS] = il4965_hdl_missed_beacon;
4186 	/* Rx handlers */
4187 	il->handlers[N_RX_PHY] = il4965_hdl_rx_phy;
4188 	il->handlers[N_RX_MPDU] = il4965_hdl_rx;
4189 	il->handlers[N_RX] = il4965_hdl_rx;
4190 	/* block ack */
4191 	il->handlers[N_COMPRESSED_BA] = il4965_hdl_compressed_ba;
4192 	/* Tx response */
4193 	il->handlers[C_TX] = il4965_hdl_tx;
4194 }
4195 
4196 /*
4197  * il4965_rx_handle - Main entry function for receiving responses from uCode
4198  *
4199  * Uses the il->handlers callback function array to invoke
4200  * the appropriate handlers, including command responses,
4201  * frame-received notifications, and other notifications.
4202  */
4203 void
4204 il4965_rx_handle(struct il_priv *il)
4205 {
4206 	struct il_rx_buf *rxb;
4207 	struct il_rx_pkt *pkt;
4208 	struct il_rx_queue *rxq = &il->rxq;
4209 	u32 r, i;
4210 	int reclaim;
4211 	unsigned long flags;
4212 	u8 fill_rx = 0;
4213 	u32 count = 8;
4214 	int total_empty;
4215 
4216 	/* uCode's read idx (stored in shared DRAM) indicates the last Rx
4217 	 * buffer that the driver may process (last buffer filled by ucode). */
4218 	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
4219 	i = rxq->read;
4220 
4221 	/* Rx interrupt, but nothing sent from uCode */
4222 	if (i == r)
4223 		D_RX("r = %d, i = %d\n", r, i);
4224 
4225 	/* calculate total frames need to be restock after handling RX */
4226 	total_empty = r - rxq->write_actual;
4227 	if (total_empty < 0)
4228 		total_empty += RX_QUEUE_SIZE;
4229 
4230 	if (total_empty > (RX_QUEUE_SIZE / 2))
4231 		fill_rx = 1;
4232 
4233 	while (i != r) {
4234 		int len;
4235 
4236 		rxb = rxq->queue[i];
4237 
4238 		/* If an RXB doesn't have a Rx queue slot associated with it,
4239 		 * then a bug has been introduced in the queue refilling
4240 		 * routines -- catch it here */
4241 		BUG_ON(rxb == NULL);
4242 
4243 		rxq->queue[i] = NULL;
4244 
4245 		dma_unmap_page(&il->pci_dev->dev, rxb->page_dma,
4246 			       PAGE_SIZE << il->hw_params.rx_page_order,
4247 			       DMA_FROM_DEVICE);
4248 		pkt = rxb_addr(rxb);
4249 
4250 		len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
4251 		len += sizeof(u32);	/* account for status word */
4252 
4253 		reclaim = il_need_reclaim(il, pkt);
4254 
4255 		/* Based on type of command response or notification,
4256 		 *   handle those that need handling via function in
4257 		 *   handlers table.  See il4965_setup_handlers() */
4258 		if (il->handlers[pkt->hdr.cmd]) {
4259 			D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
4260 			     il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
4261 			il->isr_stats.handlers[pkt->hdr.cmd]++;
4262 			il->handlers[pkt->hdr.cmd] (il, rxb);
4263 		} else {
4264 			/* No handling needed */
4265 			D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
4266 			     i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
4267 		}
4268 
4269 		/*
4270 		 * XXX: After here, we should always check rxb->page
4271 		 * against NULL before touching it or its virtual
4272 		 * memory (pkt). Because some handler might have
4273 		 * already taken or freed the pages.
4274 		 */
4275 
4276 		if (reclaim) {
4277 			/* Invoke any callbacks, transfer the buffer to caller,
4278 			 * and fire off the (possibly) blocking il_send_cmd()
4279 			 * as we reclaim the driver command queue */
4280 			if (rxb->page)
4281 				il_tx_cmd_complete(il, rxb);
4282 			else
4283 				IL_WARN("Claim null rxb?\n");
4284 		}
4285 
4286 		/* Reuse the page if possible. For notification packets and
4287 		 * SKBs that fail to Rx correctly, add them back into the
4288 		 * rx_free list for reuse later. */
4289 		spin_lock_irqsave(&rxq->lock, flags);
4290 		if (rxb->page != NULL) {
4291 			rxb->page_dma =
4292 			    dma_map_page(&il->pci_dev->dev, rxb->page, 0,
4293 					 PAGE_SIZE << il->hw_params.rx_page_order,
4294 					 DMA_FROM_DEVICE);
4295 
4296 			if (unlikely(dma_mapping_error(&il->pci_dev->dev,
4297 						       rxb->page_dma))) {
4298 				__il_free_pages(il, rxb->page);
4299 				rxb->page = NULL;
4300 				list_add_tail(&rxb->list, &rxq->rx_used);
4301 			} else {
4302 				list_add_tail(&rxb->list, &rxq->rx_free);
4303 				rxq->free_count++;
4304 			}
4305 		} else
4306 			list_add_tail(&rxb->list, &rxq->rx_used);
4307 
4308 		spin_unlock_irqrestore(&rxq->lock, flags);
4309 
4310 		i = (i + 1) & RX_QUEUE_MASK;
4311 		/* If there are a lot of unused frames,
4312 		 * restock the Rx queue so ucode wont assert. */
4313 		if (fill_rx) {
4314 			count++;
4315 			if (count >= 8) {
4316 				rxq->read = i;
4317 				il4965_rx_replenish_now(il);
4318 				count = 0;
4319 			}
4320 		}
4321 	}
4322 
4323 	/* Backtrack one entry */
4324 	rxq->read = i;
4325 	if (fill_rx)
4326 		il4965_rx_replenish_now(il);
4327 	else
4328 		il4965_rx_queue_restock(il);
4329 }
4330 
4331 /* call this function to flush any scheduled tasklet */
4332 static inline void
4333 il4965_synchronize_irq(struct il_priv *il)
4334 {
4335 	/* wait to make sure we flush pending tasklet */
4336 	synchronize_irq(il->pci_dev->irq);
4337 	tasklet_kill(&il->irq_tasklet);
4338 }
4339 
4340 static void
4341 il4965_irq_tasklet(struct tasklet_struct *t)
4342 {
4343 	struct il_priv *il = from_tasklet(il, t, irq_tasklet);
4344 	u32 inta, handled = 0;
4345 	u32 inta_fh;
4346 	unsigned long flags;
4347 	u32 i;
4348 #ifdef CONFIG_IWLEGACY_DEBUG
4349 	u32 inta_mask;
4350 #endif
4351 
4352 	spin_lock_irqsave(&il->lock, flags);
4353 
4354 	/* Ack/clear/reset pending uCode interrupts.
4355 	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
4356 	 *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
4357 	inta = _il_rd(il, CSR_INT);
4358 	_il_wr(il, CSR_INT, inta);
4359 
4360 	/* Ack/clear/reset pending flow-handler (DMA) interrupts.
4361 	 * Any new interrupts that happen after this, either while we're
4362 	 * in this tasklet, or later, will show up in next ISR/tasklet. */
4363 	inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
4364 	_il_wr(il, CSR_FH_INT_STATUS, inta_fh);
4365 
4366 #ifdef CONFIG_IWLEGACY_DEBUG
4367 	if (il_get_debug_level(il) & IL_DL_ISR) {
4368 		/* just for debug */
4369 		inta_mask = _il_rd(il, CSR_INT_MASK);
4370 		D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
4371 		      inta_mask, inta_fh);
4372 	}
4373 #endif
4374 
4375 	spin_unlock_irqrestore(&il->lock, flags);
4376 
4377 	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
4378 	 * atomic, make sure that inta covers all the interrupts that
4379 	 * we've discovered, even if FH interrupt came in just after
4380 	 * reading CSR_INT. */
4381 	if (inta_fh & CSR49_FH_INT_RX_MASK)
4382 		inta |= CSR_INT_BIT_FH_RX;
4383 	if (inta_fh & CSR49_FH_INT_TX_MASK)
4384 		inta |= CSR_INT_BIT_FH_TX;
4385 
4386 	/* Now service all interrupt bits discovered above. */
4387 	if (inta & CSR_INT_BIT_HW_ERR) {
4388 		IL_ERR("Hardware error detected.  Restarting.\n");
4389 
4390 		/* Tell the device to stop sending interrupts */
4391 		il_disable_interrupts(il);
4392 
4393 		il->isr_stats.hw++;
4394 		il_irq_handle_error(il);
4395 
4396 		handled |= CSR_INT_BIT_HW_ERR;
4397 
4398 		return;
4399 	}
4400 #ifdef CONFIG_IWLEGACY_DEBUG
4401 	if (il_get_debug_level(il) & (IL_DL_ISR)) {
4402 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
4403 		if (inta & CSR_INT_BIT_SCD) {
4404 			D_ISR("Scheduler finished to transmit "
4405 			      "the frame/frames.\n");
4406 			il->isr_stats.sch++;
4407 		}
4408 
4409 		/* Alive notification via Rx interrupt will do the real work */
4410 		if (inta & CSR_INT_BIT_ALIVE) {
4411 			D_ISR("Alive interrupt\n");
4412 			il->isr_stats.alive++;
4413 		}
4414 	}
4415 #endif
4416 	/* Safely ignore these bits for debug checks below */
4417 	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
4418 
4419 	/* HW RF KILL switch toggled */
4420 	if (inta & CSR_INT_BIT_RF_KILL) {
4421 		int hw_rf_kill = 0;
4422 
4423 		if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
4424 			hw_rf_kill = 1;
4425 
4426 		IL_WARN("RF_KILL bit toggled to %s.\n",
4427 			hw_rf_kill ? "disable radio" : "enable radio");
4428 
4429 		il->isr_stats.rfkill++;
4430 
4431 		/* driver only loads ucode once setting the interface up.
4432 		 * the driver allows loading the ucode even if the radio
4433 		 * is killed. Hence update the killswitch state here. The
4434 		 * rfkill handler will care about restarting if needed.
4435 		 */
4436 		if (hw_rf_kill) {
4437 			set_bit(S_RFKILL, &il->status);
4438 		} else {
4439 			clear_bit(S_RFKILL, &il->status);
4440 			il_force_reset(il, true);
4441 		}
4442 		wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
4443 
4444 		handled |= CSR_INT_BIT_RF_KILL;
4445 	}
4446 
4447 	/* Chip got too hot and stopped itself */
4448 	if (inta & CSR_INT_BIT_CT_KILL) {
4449 		IL_ERR("Microcode CT kill error detected.\n");
4450 		il->isr_stats.ctkill++;
4451 		handled |= CSR_INT_BIT_CT_KILL;
4452 	}
4453 
4454 	/* Error detected by uCode */
4455 	if (inta & CSR_INT_BIT_SW_ERR) {
4456 		IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n",
4457 		       inta);
4458 		il->isr_stats.sw++;
4459 		il_irq_handle_error(il);
4460 		handled |= CSR_INT_BIT_SW_ERR;
4461 	}
4462 
4463 	/*
4464 	 * uCode wakes up after power-down sleep.
4465 	 * Tell device about any new tx or host commands enqueued,
4466 	 * and about any Rx buffers made available while asleep.
4467 	 */
4468 	if (inta & CSR_INT_BIT_WAKEUP) {
4469 		D_ISR("Wakeup interrupt\n");
4470 		il_rx_queue_update_write_ptr(il, &il->rxq);
4471 		for (i = 0; i < il->hw_params.max_txq_num; i++)
4472 			il_txq_update_write_ptr(il, &il->txq[i]);
4473 		il->isr_stats.wakeup++;
4474 		handled |= CSR_INT_BIT_WAKEUP;
4475 	}
4476 
4477 	/* All uCode command responses, including Tx command responses,
4478 	 * Rx "responses" (frame-received notification), and other
4479 	 * notifications from uCode come through here*/
4480 	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
4481 		il4965_rx_handle(il);
4482 		il->isr_stats.rx++;
4483 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
4484 	}
4485 
4486 	/* This "Tx" DMA channel is used only for loading uCode */
4487 	if (inta & CSR_INT_BIT_FH_TX) {
4488 		D_ISR("uCode load interrupt\n");
4489 		il->isr_stats.tx++;
4490 		handled |= CSR_INT_BIT_FH_TX;
4491 		/* Wake up uCode load routine, now that load is complete */
4492 		il->ucode_write_complete = 1;
4493 		wake_up(&il->wait_command_queue);
4494 	}
4495 
4496 	if (inta & ~handled) {
4497 		IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
4498 		il->isr_stats.unhandled++;
4499 	}
4500 
4501 	if (inta & ~(il->inta_mask)) {
4502 		IL_WARN("Disabled INTA bits 0x%08x were pending\n",
4503 			inta & ~il->inta_mask);
4504 		IL_WARN("   with FH49_INT = 0x%08x\n", inta_fh);
4505 	}
4506 
4507 	/* Re-enable all interrupts */
4508 	/* only Re-enable if disabled by irq */
4509 	if (test_bit(S_INT_ENABLED, &il->status))
4510 		il_enable_interrupts(il);
4511 	/* Re-enable RF_KILL if it occurred */
4512 	else if (handled & CSR_INT_BIT_RF_KILL)
4513 		il_enable_rfkill_int(il);
4514 
4515 #ifdef CONFIG_IWLEGACY_DEBUG
4516 	if (il_get_debug_level(il) & (IL_DL_ISR)) {
4517 		inta = _il_rd(il, CSR_INT);
4518 		inta_mask = _il_rd(il, CSR_INT_MASK);
4519 		inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
4520 		D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
4521 		      "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
4522 	}
4523 #endif
4524 }
4525 
4526 /*****************************************************************************
4527  *
4528  * sysfs attributes
4529  *
4530  *****************************************************************************/
4531 
4532 #ifdef CONFIG_IWLEGACY_DEBUG
4533 
4534 /*
4535  * The following adds a new attribute to the sysfs representation
4536  * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
4537  * used for controlling the debug level.
4538  *
4539  * See the level definitions in iwl for details.
4540  *
4541  * The debug_level being managed using sysfs below is a per device debug
4542  * level that is used instead of the global debug level if it (the per
4543  * device debug level) is set.
4544  */
4545 static ssize_t
4546 il4965_show_debug_level(struct device *d, struct device_attribute *attr,
4547 			char *buf)
4548 {
4549 	struct il_priv *il = dev_get_drvdata(d);
4550 	return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
4551 }
4552 
4553 static ssize_t
4554 il4965_store_debug_level(struct device *d, struct device_attribute *attr,
4555 			 const char *buf, size_t count)
4556 {
4557 	struct il_priv *il = dev_get_drvdata(d);
4558 	unsigned long val;
4559 	int ret;
4560 
4561 	ret = kstrtoul(buf, 0, &val);
4562 	if (ret)
4563 		IL_ERR("%s is not in hex or decimal form.\n", buf);
4564 	else
4565 		il->debug_level = val;
4566 
4567 	return strnlen(buf, count);
4568 }
4569 
4570 static DEVICE_ATTR(debug_level, 0644, il4965_show_debug_level,
4571 		   il4965_store_debug_level);
4572 
4573 #endif /* CONFIG_IWLEGACY_DEBUG */
4574 
4575 static ssize_t
4576 il4965_show_temperature(struct device *d, struct device_attribute *attr,
4577 			char *buf)
4578 {
4579 	struct il_priv *il = dev_get_drvdata(d);
4580 
4581 	if (!il_is_alive(il))
4582 		return -EAGAIN;
4583 
4584 	return sprintf(buf, "%d\n", il->temperature);
4585 }
4586 
4587 static DEVICE_ATTR(temperature, 0444, il4965_show_temperature, NULL);
4588 
4589 static ssize_t
4590 il4965_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
4591 {
4592 	struct il_priv *il = dev_get_drvdata(d);
4593 
4594 	if (!il_is_ready_rf(il))
4595 		return sprintf(buf, "off\n");
4596 	else
4597 		return sprintf(buf, "%d\n", il->tx_power_user_lmt);
4598 }
4599 
4600 static ssize_t
4601 il4965_store_tx_power(struct device *d, struct device_attribute *attr,
4602 		      const char *buf, size_t count)
4603 {
4604 	struct il_priv *il = dev_get_drvdata(d);
4605 	unsigned long val;
4606 	int ret;
4607 
4608 	ret = kstrtoul(buf, 10, &val);
4609 	if (ret)
4610 		IL_INFO("%s is not in decimal form.\n", buf);
4611 	else {
4612 		ret = il_set_tx_power(il, val, false);
4613 		if (ret)
4614 			IL_ERR("failed setting tx power (0x%08x).\n", ret);
4615 		else
4616 			ret = count;
4617 	}
4618 	return ret;
4619 }
4620 
4621 static DEVICE_ATTR(tx_power, 0644, il4965_show_tx_power,
4622 		   il4965_store_tx_power);
4623 
4624 static struct attribute *il_sysfs_entries[] = {
4625 	&dev_attr_temperature.attr,
4626 	&dev_attr_tx_power.attr,
4627 #ifdef CONFIG_IWLEGACY_DEBUG
4628 	&dev_attr_debug_level.attr,
4629 #endif
4630 	NULL
4631 };
4632 
4633 static const struct attribute_group il_attribute_group = {
4634 	.name = NULL,		/* put in device directory */
4635 	.attrs = il_sysfs_entries,
4636 };
4637 
4638 /******************************************************************************
4639  *
4640  * uCode download functions
4641  *
4642  ******************************************************************************/
4643 
4644 static void
4645 il4965_dealloc_ucode_pci(struct il_priv *il)
4646 {
4647 	il_free_fw_desc(il->pci_dev, &il->ucode_code);
4648 	il_free_fw_desc(il->pci_dev, &il->ucode_data);
4649 	il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
4650 	il_free_fw_desc(il->pci_dev, &il->ucode_init);
4651 	il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
4652 	il_free_fw_desc(il->pci_dev, &il->ucode_boot);
4653 }
4654 
4655 static void
4656 il4965_nic_start(struct il_priv *il)
4657 {
4658 	/* Remove all resets to allow NIC to operate */
4659 	_il_wr(il, CSR_RESET, 0);
4660 }
4661 
4662 static void il4965_ucode_callback(const struct firmware *ucode_raw,
4663 				  void *context);
4664 static int il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length);
4665 
4666 static int __must_check
4667 il4965_request_firmware(struct il_priv *il, bool first)
4668 {
4669 	const char *name_pre = il->cfg->fw_name_pre;
4670 	char tag[8];
4671 
4672 	if (first) {
4673 		il->fw_idx = il->cfg->ucode_api_max;
4674 		sprintf(tag, "%d", il->fw_idx);
4675 	} else {
4676 		il->fw_idx--;
4677 		sprintf(tag, "%d", il->fw_idx);
4678 	}
4679 
4680 	if (il->fw_idx < il->cfg->ucode_api_min) {
4681 		IL_ERR("no suitable firmware found!\n");
4682 		return -ENOENT;
4683 	}
4684 
4685 	sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
4686 
4687 	D_INFO("attempting to load firmware '%s'\n", il->firmware_name);
4688 
4689 	return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name,
4690 				       &il->pci_dev->dev, GFP_KERNEL, il,
4691 				       il4965_ucode_callback);
4692 }
4693 
4694 struct il4965_firmware_pieces {
4695 	const void *inst, *data, *init, *init_data, *boot;
4696 	size_t inst_size, data_size, init_size, init_data_size, boot_size;
4697 };
4698 
4699 static int
4700 il4965_load_firmware(struct il_priv *il, const struct firmware *ucode_raw,
4701 		     struct il4965_firmware_pieces *pieces)
4702 {
4703 	struct il_ucode_header *ucode = (void *)ucode_raw->data;
4704 	u32 api_ver, hdr_size;
4705 	const u8 *src;
4706 
4707 	il->ucode_ver = le32_to_cpu(ucode->ver);
4708 	api_ver = IL_UCODE_API(il->ucode_ver);
4709 
4710 	switch (api_ver) {
4711 	default:
4712 	case 0:
4713 	case 1:
4714 	case 2:
4715 		hdr_size = 24;
4716 		if (ucode_raw->size < hdr_size) {
4717 			IL_ERR("File size too small!\n");
4718 			return -EINVAL;
4719 		}
4720 		pieces->inst_size = le32_to_cpu(ucode->v1.inst_size);
4721 		pieces->data_size = le32_to_cpu(ucode->v1.data_size);
4722 		pieces->init_size = le32_to_cpu(ucode->v1.init_size);
4723 		pieces->init_data_size = le32_to_cpu(ucode->v1.init_data_size);
4724 		pieces->boot_size = le32_to_cpu(ucode->v1.boot_size);
4725 		src = ucode->v1.data;
4726 		break;
4727 	}
4728 
4729 	/* Verify size of file vs. image size info in file's header */
4730 	if (ucode_raw->size !=
4731 	    hdr_size + pieces->inst_size + pieces->data_size +
4732 	    pieces->init_size + pieces->init_data_size + pieces->boot_size) {
4733 
4734 		IL_ERR("uCode file size %d does not match expected size\n",
4735 		       (int)ucode_raw->size);
4736 		return -EINVAL;
4737 	}
4738 
4739 	pieces->inst = src;
4740 	src += pieces->inst_size;
4741 	pieces->data = src;
4742 	src += pieces->data_size;
4743 	pieces->init = src;
4744 	src += pieces->init_size;
4745 	pieces->init_data = src;
4746 	src += pieces->init_data_size;
4747 	pieces->boot = src;
4748 	src += pieces->boot_size;
4749 
4750 	return 0;
4751 }
4752 
4753 /*
4754  * il4965_ucode_callback - callback when firmware was loaded
4755  *
4756  * If loaded successfully, copies the firmware into buffers
4757  * for the card to fetch (via DMA).
4758  */
4759 static void
4760 il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
4761 {
4762 	struct il_priv *il = context;
4763 	int err;
4764 	struct il4965_firmware_pieces pieces;
4765 	const unsigned int api_max = il->cfg->ucode_api_max;
4766 	const unsigned int api_min = il->cfg->ucode_api_min;
4767 	u32 api_ver;
4768 
4769 	u32 max_probe_length = 200;
4770 	u32 standard_phy_calibration_size =
4771 	    IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE;
4772 
4773 	memset(&pieces, 0, sizeof(pieces));
4774 
4775 	if (!ucode_raw) {
4776 		if (il->fw_idx <= il->cfg->ucode_api_max)
4777 			IL_ERR("request for firmware file '%s' failed.\n",
4778 			       il->firmware_name);
4779 		goto try_again;
4780 	}
4781 
4782 	D_INFO("Loaded firmware file '%s' (%zd bytes).\n", il->firmware_name,
4783 	       ucode_raw->size);
4784 
4785 	/* Make sure that we got at least the API version number */
4786 	if (ucode_raw->size < 4) {
4787 		IL_ERR("File size way too small!\n");
4788 		goto try_again;
4789 	}
4790 
4791 	/* Data from ucode file:  header followed by uCode images */
4792 	err = il4965_load_firmware(il, ucode_raw, &pieces);
4793 
4794 	if (err)
4795 		goto try_again;
4796 
4797 	api_ver = IL_UCODE_API(il->ucode_ver);
4798 
4799 	/*
4800 	 * api_ver should match the api version forming part of the
4801 	 * firmware filename ... but we don't check for that and only rely
4802 	 * on the API version read from firmware header from here on forward
4803 	 */
4804 	if (api_ver < api_min || api_ver > api_max) {
4805 		IL_ERR("Driver unable to support your firmware API. "
4806 		       "Driver supports v%u, firmware is v%u.\n", api_max,
4807 		       api_ver);
4808 		goto try_again;
4809 	}
4810 
4811 	if (api_ver != api_max)
4812 		IL_ERR("Firmware has old API version. Expected v%u, "
4813 		       "got v%u. New firmware can be obtained "
4814 		       "from http://www.intellinuxwireless.org.\n", api_max,
4815 		       api_ver);
4816 
4817 	IL_INFO("loaded firmware version %u.%u.%u.%u\n",
4818 		IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
4819 		IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
4820 
4821 	snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
4822 		 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
4823 		 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
4824 		 IL_UCODE_SERIAL(il->ucode_ver));
4825 
4826 	/*
4827 	 * For any of the failures below (before allocating pci memory)
4828 	 * we will try to load a version with a smaller API -- maybe the
4829 	 * user just got a corrupted version of the latest API.
4830 	 */
4831 
4832 	D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
4833 	D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size);
4834 	D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size);
4835 	D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size);
4836 	D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size);
4837 	D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size);
4838 
4839 	/* Verify that uCode images will fit in card's SRAM */
4840 	if (pieces.inst_size > il->hw_params.max_inst_size) {
4841 		IL_ERR("uCode instr len %zd too large to fit in\n",
4842 		       pieces.inst_size);
4843 		goto try_again;
4844 	}
4845 
4846 	if (pieces.data_size > il->hw_params.max_data_size) {
4847 		IL_ERR("uCode data len %zd too large to fit in\n",
4848 		       pieces.data_size);
4849 		goto try_again;
4850 	}
4851 
4852 	if (pieces.init_size > il->hw_params.max_inst_size) {
4853 		IL_ERR("uCode init instr len %zd too large to fit in\n",
4854 		       pieces.init_size);
4855 		goto try_again;
4856 	}
4857 
4858 	if (pieces.init_data_size > il->hw_params.max_data_size) {
4859 		IL_ERR("uCode init data len %zd too large to fit in\n",
4860 		       pieces.init_data_size);
4861 		goto try_again;
4862 	}
4863 
4864 	if (pieces.boot_size > il->hw_params.max_bsm_size) {
4865 		IL_ERR("uCode boot instr len %zd too large to fit in\n",
4866 		       pieces.boot_size);
4867 		goto try_again;
4868 	}
4869 
4870 	/* Allocate ucode buffers for card's bus-master loading ... */
4871 
4872 	/* Runtime instructions and 2 copies of data:
4873 	 * 1) unmodified from disk
4874 	 * 2) backup cache for save/restore during power-downs */
4875 	il->ucode_code.len = pieces.inst_size;
4876 	il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
4877 
4878 	il->ucode_data.len = pieces.data_size;
4879 	il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
4880 
4881 	il->ucode_data_backup.len = pieces.data_size;
4882 	il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
4883 
4884 	if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
4885 	    !il->ucode_data_backup.v_addr)
4886 		goto err_pci_alloc;
4887 
4888 	/* Initialization instructions and data */
4889 	if (pieces.init_size && pieces.init_data_size) {
4890 		il->ucode_init.len = pieces.init_size;
4891 		il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
4892 
4893 		il->ucode_init_data.len = pieces.init_data_size;
4894 		il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
4895 
4896 		if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
4897 			goto err_pci_alloc;
4898 	}
4899 
4900 	/* Bootstrap (instructions only, no data) */
4901 	if (pieces.boot_size) {
4902 		il->ucode_boot.len = pieces.boot_size;
4903 		il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
4904 
4905 		if (!il->ucode_boot.v_addr)
4906 			goto err_pci_alloc;
4907 	}
4908 
4909 	/* Now that we can no longer fail, copy information */
4910 
4911 	il->sta_key_max_num = STA_KEY_MAX_NUM;
4912 
4913 	/* Copy images into buffers for card's bus-master reads ... */
4914 
4915 	/* Runtime instructions (first block of data in file) */
4916 	D_INFO("Copying (but not loading) uCode instr len %zd\n",
4917 	       pieces.inst_size);
4918 	memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size);
4919 
4920 	D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
4921 	       il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
4922 
4923 	/*
4924 	 * Runtime data
4925 	 * NOTE:  Copy into backup buffer will be done in il_up()
4926 	 */
4927 	D_INFO("Copying (but not loading) uCode data len %zd\n",
4928 	       pieces.data_size);
4929 	memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size);
4930 	memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
4931 
4932 	/* Initialization instructions */
4933 	if (pieces.init_size) {
4934 		D_INFO("Copying (but not loading) init instr len %zd\n",
4935 		       pieces.init_size);
4936 		memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size);
4937 	}
4938 
4939 	/* Initialization data */
4940 	if (pieces.init_data_size) {
4941 		D_INFO("Copying (but not loading) init data len %zd\n",
4942 		       pieces.init_data_size);
4943 		memcpy(il->ucode_init_data.v_addr, pieces.init_data,
4944 		       pieces.init_data_size);
4945 	}
4946 
4947 	/* Bootstrap instructions */
4948 	D_INFO("Copying (but not loading) boot instr len %zd\n",
4949 	       pieces.boot_size);
4950 	memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
4951 
4952 	/*
4953 	 * figure out the offset of chain noise reset and gain commands
4954 	 * base on the size of standard phy calibration commands table size
4955 	 */
4956 	il->_4965.phy_calib_chain_noise_reset_cmd =
4957 	    standard_phy_calibration_size;
4958 	il->_4965.phy_calib_chain_noise_gain_cmd =
4959 	    standard_phy_calibration_size + 1;
4960 
4961 	/**************************************************
4962 	 * This is still part of probe() in a sense...
4963 	 *
4964 	 * 9. Setup and register with mac80211 and debugfs
4965 	 **************************************************/
4966 	err = il4965_mac_setup_register(il, max_probe_length);
4967 	if (err)
4968 		goto out_unbind;
4969 
4970 	il_dbgfs_register(il, DRV_NAME);
4971 
4972 	err = sysfs_create_group(&il->pci_dev->dev.kobj, &il_attribute_group);
4973 	if (err) {
4974 		IL_ERR("failed to create sysfs device attributes\n");
4975 		goto out_unbind;
4976 	}
4977 
4978 	/* We have our copies now, allow OS release its copies */
4979 	release_firmware(ucode_raw);
4980 	complete(&il->_4965.firmware_loading_complete);
4981 	return;
4982 
4983 try_again:
4984 	/* try next, if any */
4985 	if (il4965_request_firmware(il, false))
4986 		goto out_unbind;
4987 	release_firmware(ucode_raw);
4988 	return;
4989 
4990 err_pci_alloc:
4991 	IL_ERR("failed to allocate pci memory\n");
4992 	il4965_dealloc_ucode_pci(il);
4993 out_unbind:
4994 	complete(&il->_4965.firmware_loading_complete);
4995 	device_release_driver(&il->pci_dev->dev);
4996 	release_firmware(ucode_raw);
4997 }
4998 
4999 static const char *const desc_lookup_text[] = {
5000 	"OK",
5001 	"FAIL",
5002 	"BAD_PARAM",
5003 	"BAD_CHECKSUM",
5004 	"NMI_INTERRUPT_WDG",
5005 	"SYSASSERT",
5006 	"FATAL_ERROR",
5007 	"BAD_COMMAND",
5008 	"HW_ERROR_TUNE_LOCK",
5009 	"HW_ERROR_TEMPERATURE",
5010 	"ILLEGAL_CHAN_FREQ",
5011 	"VCC_NOT_STBL",
5012 	"FH49_ERROR",
5013 	"NMI_INTERRUPT_HOST",
5014 	"NMI_INTERRUPT_ACTION_PT",
5015 	"NMI_INTERRUPT_UNKNOWN",
5016 	"UCODE_VERSION_MISMATCH",
5017 	"HW_ERROR_ABS_LOCK",
5018 	"HW_ERROR_CAL_LOCK_FAIL",
5019 	"NMI_INTERRUPT_INST_ACTION_PT",
5020 	"NMI_INTERRUPT_DATA_ACTION_PT",
5021 	"NMI_TRM_HW_ER",
5022 	"NMI_INTERRUPT_TRM",
5023 	"NMI_INTERRUPT_BREAK_POINT",
5024 	"DEBUG_0",
5025 	"DEBUG_1",
5026 	"DEBUG_2",
5027 	"DEBUG_3",
5028 };
5029 
5030 static struct {
5031 	char *name;
5032 	u8 num;
5033 } advanced_lookup[] = {
5034 	{
5035 	"NMI_INTERRUPT_WDG", 0x34}, {
5036 	"SYSASSERT", 0x35}, {
5037 	"UCODE_VERSION_MISMATCH", 0x37}, {
5038 	"BAD_COMMAND", 0x38}, {
5039 	"NMI_INTERRUPT_DATA_ACTION_PT", 0x3C}, {
5040 	"FATAL_ERROR", 0x3D}, {
5041 	"NMI_TRM_HW_ERR", 0x46}, {
5042 	"NMI_INTERRUPT_TRM", 0x4C}, {
5043 	"NMI_INTERRUPT_BREAK_POINT", 0x54}, {
5044 	"NMI_INTERRUPT_WDG_RXF_FULL", 0x5C}, {
5045 	"NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64}, {
5046 	"NMI_INTERRUPT_HOST", 0x66}, {
5047 	"NMI_INTERRUPT_ACTION_PT", 0x7C}, {
5048 	"NMI_INTERRUPT_UNKNOWN", 0x84}, {
5049 	"NMI_INTERRUPT_INST_ACTION_PT", 0x86}, {
5050 "ADVANCED_SYSASSERT", 0},};
5051 
5052 static const char *
5053 il4965_desc_lookup(u32 num)
5054 {
5055 	int i;
5056 	int max = ARRAY_SIZE(desc_lookup_text);
5057 
5058 	if (num < max)
5059 		return desc_lookup_text[num];
5060 
5061 	max = ARRAY_SIZE(advanced_lookup) - 1;
5062 	for (i = 0; i < max; i++) {
5063 		if (advanced_lookup[i].num == num)
5064 			break;
5065 	}
5066 	return advanced_lookup[i].name;
5067 }
5068 
5069 #define ERROR_START_OFFSET  (1 * sizeof(u32))
5070 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
5071 
5072 void
5073 il4965_dump_nic_error_log(struct il_priv *il)
5074 {
5075 	u32 data2, line;
5076 	u32 desc, time, count, base, data1;
5077 	u32 blink1, blink2, ilink1, ilink2;
5078 	u32 pc, hcmd;
5079 
5080 	if (il->ucode_type == UCODE_INIT)
5081 		base = le32_to_cpu(il->card_alive_init.error_event_table_ptr);
5082 	else
5083 		base = le32_to_cpu(il->card_alive.error_event_table_ptr);
5084 
5085 	if (!il->ops->is_valid_rtc_data_addr(base)) {
5086 		IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n",
5087 		       base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT");
5088 		return;
5089 	}
5090 
5091 	count = il_read_targ_mem(il, base);
5092 
5093 	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
5094 		IL_ERR("Start IWL Error Log Dump:\n");
5095 		IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
5096 	}
5097 
5098 	desc = il_read_targ_mem(il, base + 1 * sizeof(u32));
5099 	il->isr_stats.err_code = desc;
5100 	pc = il_read_targ_mem(il, base + 2 * sizeof(u32));
5101 	blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32));
5102 	blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32));
5103 	ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32));
5104 	ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32));
5105 	data1 = il_read_targ_mem(il, base + 7 * sizeof(u32));
5106 	data2 = il_read_targ_mem(il, base + 8 * sizeof(u32));
5107 	line = il_read_targ_mem(il, base + 9 * sizeof(u32));
5108 	time = il_read_targ_mem(il, base + 11 * sizeof(u32));
5109 	hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32));
5110 
5111 	IL_ERR("Desc                                  Time       "
5112 	       "data1      data2      line\n");
5113 	IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n",
5114 	       il4965_desc_lookup(desc), desc, time, data1, data2, line);
5115 	IL_ERR("pc      blink1  blink2  ilink1  ilink2  hcmd\n");
5116 	IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1,
5117 	       blink2, ilink1, ilink2, hcmd);
5118 }
5119 
5120 static void
5121 il4965_rf_kill_ct_config(struct il_priv *il)
5122 {
5123 	struct il_ct_kill_config cmd;
5124 	unsigned long flags;
5125 	int ret = 0;
5126 
5127 	spin_lock_irqsave(&il->lock, flags);
5128 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR,
5129 	       CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
5130 	spin_unlock_irqrestore(&il->lock, flags);
5131 
5132 	cmd.critical_temperature_R =
5133 	    cpu_to_le32(il->hw_params.ct_kill_threshold);
5134 
5135 	ret = il_send_cmd_pdu(il, C_CT_KILL_CONFIG, sizeof(cmd), &cmd);
5136 	if (ret)
5137 		IL_ERR("C_CT_KILL_CONFIG failed\n");
5138 	else
5139 		D_INFO("C_CT_KILL_CONFIG " "succeeded, "
5140 		       "critical temperature is %d\n",
5141 		       il->hw_params.ct_kill_threshold);
5142 }
5143 
5144 static const s8 default_queue_to_tx_fifo[] = {
5145 	IL_TX_FIFO_VO,
5146 	IL_TX_FIFO_VI,
5147 	IL_TX_FIFO_BE,
5148 	IL_TX_FIFO_BK,
5149 	IL49_CMD_FIFO_NUM,
5150 	IL_TX_FIFO_UNUSED,
5151 	IL_TX_FIFO_UNUSED,
5152 };
5153 
5154 #define IL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
5155 
5156 static int
5157 il4965_alive_notify(struct il_priv *il)
5158 {
5159 	u32 a;
5160 	unsigned long flags;
5161 	int i, chan;
5162 	u32 reg_val;
5163 
5164 	spin_lock_irqsave(&il->lock, flags);
5165 
5166 	/* Clear 4965's internal Tx Scheduler data base */
5167 	il->scd_base_addr = il_rd_prph(il, IL49_SCD_SRAM_BASE_ADDR);
5168 	a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET;
5169 	for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
5170 		il_write_targ_mem(il, a, 0);
5171 	for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
5172 		il_write_targ_mem(il, a, 0);
5173 	for (;
5174 	     a <
5175 	     il->scd_base_addr +
5176 	     IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num);
5177 	     a += 4)
5178 		il_write_targ_mem(il, a, 0);
5179 
5180 	/* Tel 4965 where to find Tx byte count tables */
5181 	il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR, il->scd_bc_tbls.dma >> 10);
5182 
5183 	/* Enable DMA channel */
5184 	for (chan = 0; chan < FH49_TCSR_CHNL_NUM; chan++)
5185 		il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(chan),
5186 		      FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
5187 		      FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
5188 
5189 	/* Update FH chicken bits */
5190 	reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG);
5191 	il_wr(il, FH49_TX_CHICKEN_BITS_REG,
5192 	      reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
5193 
5194 	/* Disable chain mode for all queues */
5195 	il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0);
5196 
5197 	/* Initialize each Tx queue (including the command queue) */
5198 	for (i = 0; i < il->hw_params.max_txq_num; i++) {
5199 
5200 		/* TFD circular buffer read/write idxes */
5201 		il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0);
5202 		il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8));
5203 
5204 		/* Max Tx Window size for Scheduler-ACK mode */
5205 		il_write_targ_mem(il,
5206 				  il->scd_base_addr +
5207 				  IL49_SCD_CONTEXT_QUEUE_OFFSET(i),
5208 				  (SCD_WIN_SIZE <<
5209 				   IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
5210 				  IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
5211 
5212 		/* Frame limit */
5213 		il_write_targ_mem(il,
5214 				  il->scd_base_addr +
5215 				  IL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
5216 				  sizeof(u32),
5217 				  (SCD_FRAME_LIMIT <<
5218 				   IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
5219 				  IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
5220 
5221 	}
5222 	il_wr_prph(il, IL49_SCD_INTERRUPT_MASK,
5223 		   (1 << il->hw_params.max_txq_num) - 1);
5224 
5225 	/* Activate all Tx DMA/FIFO channels */
5226 	il4965_txq_set_sched(il, IL_MASK(0, 6));
5227 
5228 	il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0);
5229 
5230 	/* make sure all queue are not stopped */
5231 	memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped));
5232 	for (i = 0; i < 4; i++)
5233 		atomic_set(&il->queue_stop_count[i], 0);
5234 
5235 	/* reset to 0 to enable all the queue first */
5236 	il->txq_ctx_active_msk = 0;
5237 	/* Map each Tx/cmd queue to its corresponding fifo */
5238 	BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7);
5239 
5240 	for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
5241 		int ac = default_queue_to_tx_fifo[i];
5242 
5243 		il_txq_ctx_activate(il, i);
5244 
5245 		if (ac == IL_TX_FIFO_UNUSED)
5246 			continue;
5247 
5248 		il4965_tx_queue_set_status(il, &il->txq[i], ac, 0);
5249 	}
5250 
5251 	spin_unlock_irqrestore(&il->lock, flags);
5252 
5253 	return 0;
5254 }
5255 
5256 /*
5257  * il4965_alive_start - called after N_ALIVE notification received
5258  *                   from protocol/runtime uCode (initialization uCode's
5259  *                   Alive gets handled by il_init_alive_start()).
5260  */
5261 static void
5262 il4965_alive_start(struct il_priv *il)
5263 {
5264 	int ret = 0;
5265 
5266 	D_INFO("Runtime Alive received.\n");
5267 
5268 	if (il->card_alive.is_valid != UCODE_VALID_OK) {
5269 		/* We had an error bringing up the hardware, so take it
5270 		 * all the way back down so we can try again */
5271 		D_INFO("Alive failed.\n");
5272 		goto restart;
5273 	}
5274 
5275 	/* Initialize uCode has loaded Runtime uCode ... verify inst image.
5276 	 * This is a paranoid check, because we would not have gotten the
5277 	 * "runtime" alive if code weren't properly loaded.  */
5278 	if (il4965_verify_ucode(il)) {
5279 		/* Runtime instruction load was bad;
5280 		 * take it all the way back down so we can try again */
5281 		D_INFO("Bad runtime uCode load.\n");
5282 		goto restart;
5283 	}
5284 
5285 	ret = il4965_alive_notify(il);
5286 	if (ret) {
5287 		IL_WARN("Could not complete ALIVE transition [ntf]: %d\n", ret);
5288 		goto restart;
5289 	}
5290 
5291 	/* After the ALIVE response, we can send host commands to the uCode */
5292 	set_bit(S_ALIVE, &il->status);
5293 
5294 	/* Enable watchdog to monitor the driver tx queues */
5295 	il_setup_watchdog(il);
5296 
5297 	if (il_is_rfkill(il))
5298 		return;
5299 
5300 	ieee80211_wake_queues(il->hw);
5301 
5302 	il->active_rate = RATES_MASK;
5303 
5304 	il_power_update_mode(il, true);
5305 	D_INFO("Updated power mode\n");
5306 
5307 	if (il_is_associated(il)) {
5308 		struct il_rxon_cmd *active_rxon =
5309 		    (struct il_rxon_cmd *)&il->active;
5310 		/* apply any changes in staging */
5311 		il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
5312 		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
5313 	} else {
5314 		/* Initialize our rx_config data */
5315 		il_connection_init_rx_config(il);
5316 
5317 		if (il->ops->set_rxon_chain)
5318 			il->ops->set_rxon_chain(il);
5319 	}
5320 
5321 	/* Configure bluetooth coexistence if enabled */
5322 	il_send_bt_config(il);
5323 
5324 	il4965_reset_run_time_calib(il);
5325 
5326 	set_bit(S_READY, &il->status);
5327 
5328 	/* Configure the adapter for unassociated operation */
5329 	il_commit_rxon(il);
5330 
5331 	/* At this point, the NIC is initialized and operational */
5332 	il4965_rf_kill_ct_config(il);
5333 
5334 	D_INFO("ALIVE processing complete.\n");
5335 	wake_up(&il->wait_command_queue);
5336 
5337 	return;
5338 
5339 restart:
5340 	queue_work(il->workqueue, &il->restart);
5341 }
5342 
5343 static void il4965_cancel_deferred_work(struct il_priv *il);
5344 
5345 static void
5346 __il4965_down(struct il_priv *il)
5347 {
5348 	unsigned long flags;
5349 	int exit_pending;
5350 
5351 	D_INFO(DRV_NAME " is going down\n");
5352 
5353 	il_scan_cancel_timeout(il, 200);
5354 
5355 	exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
5356 
5357 	/* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
5358 	 * to prevent rearm timer */
5359 	del_timer_sync(&il->watchdog);
5360 
5361 	il_clear_ucode_stations(il);
5362 
5363 	/* FIXME: race conditions ? */
5364 	spin_lock_irq(&il->sta_lock);
5365 	/*
5366 	 * Remove all key information that is not stored as part
5367 	 * of station information since mac80211 may not have had
5368 	 * a chance to remove all the keys. When device is
5369 	 * reconfigured by mac80211 after an error all keys will
5370 	 * be reconfigured.
5371 	 */
5372 	memset(il->_4965.wep_keys, 0, sizeof(il->_4965.wep_keys));
5373 	il->_4965.key_mapping_keys = 0;
5374 	spin_unlock_irq(&il->sta_lock);
5375 
5376 	il_dealloc_bcast_stations(il);
5377 	il_clear_driver_stations(il);
5378 
5379 	/* Unblock any waiting calls */
5380 	wake_up_all(&il->wait_command_queue);
5381 
5382 	/* Wipe out the EXIT_PENDING status bit if we are not actually
5383 	 * exiting the module */
5384 	if (!exit_pending)
5385 		clear_bit(S_EXIT_PENDING, &il->status);
5386 
5387 	/* stop and reset the on-board processor */
5388 	_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
5389 
5390 	/* tell the device to stop sending interrupts */
5391 	spin_lock_irqsave(&il->lock, flags);
5392 	il_disable_interrupts(il);
5393 	spin_unlock_irqrestore(&il->lock, flags);
5394 	il4965_synchronize_irq(il);
5395 
5396 	if (il->mac80211_registered)
5397 		ieee80211_stop_queues(il->hw);
5398 
5399 	/* If we have not previously called il_init() then
5400 	 * clear all bits but the RF Kill bit and return */
5401 	if (!il_is_init(il)) {
5402 		il->status =
5403 		    test_bit(S_RFKILL, &il->status) << S_RFKILL |
5404 		    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
5405 		    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
5406 		goto exit;
5407 	}
5408 
5409 	/* ...otherwise clear out all the status bits but the RF Kill
5410 	 * bit and continue taking the NIC down. */
5411 	il->status &=
5412 	    test_bit(S_RFKILL, &il->status) << S_RFKILL |
5413 	    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
5414 	    test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
5415 	    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
5416 
5417 	/*
5418 	 * We disabled and synchronized interrupt, and priv->mutex is taken, so
5419 	 * here is the only thread which will program device registers, but
5420 	 * still have lockdep assertions, so we are taking reg_lock.
5421 	 */
5422 	spin_lock_irq(&il->reg_lock);
5423 	/* FIXME: il_grab_nic_access if rfkill is off ? */
5424 
5425 	il4965_txq_ctx_stop(il);
5426 	il4965_rxq_stop(il);
5427 	/* Power-down device's busmaster DMA clocks */
5428 	_il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
5429 	udelay(5);
5430 	/* Make sure (redundant) we've released our request to stay awake */
5431 	_il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
5432 	/* Stop the device, and put it in low power state */
5433 	_il_apm_stop(il);
5434 
5435 	spin_unlock_irq(&il->reg_lock);
5436 
5437 	il4965_txq_ctx_unmap(il);
5438 exit:
5439 	memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
5440 
5441 	dev_kfree_skb(il->beacon_skb);
5442 	il->beacon_skb = NULL;
5443 
5444 	/* clear out any free frames */
5445 	il4965_clear_free_frames(il);
5446 }
5447 
5448 static void
5449 il4965_down(struct il_priv *il)
5450 {
5451 	mutex_lock(&il->mutex);
5452 	__il4965_down(il);
5453 	mutex_unlock(&il->mutex);
5454 
5455 	il4965_cancel_deferred_work(il);
5456 }
5457 
5458 
5459 static void
5460 il4965_set_hw_ready(struct il_priv *il)
5461 {
5462 	int ret;
5463 
5464 	il_set_bit(il, CSR_HW_IF_CONFIG_REG,
5465 		   CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
5466 
5467 	/* See if we got it */
5468 	ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
5469 			   CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
5470 			   CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
5471 			   100);
5472 	if (ret >= 0)
5473 		il->hw_ready = true;
5474 
5475 	D_INFO("hardware %s ready\n", (il->hw_ready) ? "" : "not");
5476 }
5477 
5478 static void
5479 il4965_prepare_card_hw(struct il_priv *il)
5480 {
5481 	int ret;
5482 
5483 	il->hw_ready = false;
5484 
5485 	il4965_set_hw_ready(il);
5486 	if (il->hw_ready)
5487 		return;
5488 
5489 	/* If HW is not ready, prepare the conditions to check again */
5490 	il_set_bit(il, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE);
5491 
5492 	ret =
5493 	    _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
5494 			 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
5495 			 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
5496 
5497 	/* HW should be ready by now, check again. */
5498 	if (ret != -ETIMEDOUT)
5499 		il4965_set_hw_ready(il);
5500 }
5501 
5502 #define MAX_HW_RESTARTS 5
5503 
5504 static int
5505 __il4965_up(struct il_priv *il)
5506 {
5507 	int i;
5508 	int ret;
5509 
5510 	if (test_bit(S_EXIT_PENDING, &il->status)) {
5511 		IL_WARN("Exit pending; will not bring the NIC up\n");
5512 		return -EIO;
5513 	}
5514 
5515 	if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
5516 		IL_ERR("ucode not available for device bringup\n");
5517 		return -EIO;
5518 	}
5519 
5520 	ret = il4965_alloc_bcast_station(il);
5521 	if (ret) {
5522 		il_dealloc_bcast_stations(il);
5523 		return ret;
5524 	}
5525 
5526 	il4965_prepare_card_hw(il);
5527 	if (!il->hw_ready) {
5528 		il_dealloc_bcast_stations(il);
5529 		IL_ERR("HW not ready\n");
5530 		return -EIO;
5531 	}
5532 
5533 	/* If platform's RF_KILL switch is NOT set to KILL */
5534 	if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
5535 		clear_bit(S_RFKILL, &il->status);
5536 	else {
5537 		set_bit(S_RFKILL, &il->status);
5538 		wiphy_rfkill_set_hw_state(il->hw->wiphy, true);
5539 
5540 		il_dealloc_bcast_stations(il);
5541 		il_enable_rfkill_int(il);
5542 		IL_WARN("Radio disabled by HW RF Kill switch\n");
5543 		return 0;
5544 	}
5545 
5546 	_il_wr(il, CSR_INT, 0xFFFFFFFF);
5547 
5548 	/* must be initialised before il_hw_nic_init */
5549 	il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM;
5550 
5551 	ret = il4965_hw_nic_init(il);
5552 	if (ret) {
5553 		IL_ERR("Unable to init nic\n");
5554 		il_dealloc_bcast_stations(il);
5555 		return ret;
5556 	}
5557 
5558 	/* make sure rfkill handshake bits are cleared */
5559 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
5560 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
5561 
5562 	/* clear (again), then enable host interrupts */
5563 	_il_wr(il, CSR_INT, 0xFFFFFFFF);
5564 	il_enable_interrupts(il);
5565 
5566 	/* really make sure rfkill handshake bits are cleared */
5567 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
5568 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
5569 
5570 	/* Copy original ucode data image from disk into backup cache.
5571 	 * This will be used to initialize the on-board processor's
5572 	 * data SRAM for a clean start when the runtime program first loads. */
5573 	memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
5574 	       il->ucode_data.len);
5575 
5576 	for (i = 0; i < MAX_HW_RESTARTS; i++) {
5577 
5578 		/* load bootstrap state machine,
5579 		 * load bootstrap program into processor's memory,
5580 		 * prepare to load the "initialize" uCode */
5581 		ret = il->ops->load_ucode(il);
5582 
5583 		if (ret) {
5584 			IL_ERR("Unable to set up bootstrap uCode: %d\n", ret);
5585 			continue;
5586 		}
5587 
5588 		/* start card; "initialize" will load runtime ucode */
5589 		il4965_nic_start(il);
5590 
5591 		D_INFO(DRV_NAME " is coming up\n");
5592 
5593 		return 0;
5594 	}
5595 
5596 	set_bit(S_EXIT_PENDING, &il->status);
5597 	__il4965_down(il);
5598 	clear_bit(S_EXIT_PENDING, &il->status);
5599 
5600 	/* tried to restart and config the device for as long as our
5601 	 * patience could withstand */
5602 	IL_ERR("Unable to initialize device after %d attempts.\n", i);
5603 	return -EIO;
5604 }
5605 
5606 /*****************************************************************************
5607  *
5608  * Workqueue callbacks
5609  *
5610  *****************************************************************************/
5611 
5612 static void
5613 il4965_bg_init_alive_start(struct work_struct *data)
5614 {
5615 	struct il_priv *il =
5616 	    container_of(data, struct il_priv, init_alive_start.work);
5617 
5618 	mutex_lock(&il->mutex);
5619 	if (test_bit(S_EXIT_PENDING, &il->status))
5620 		goto out;
5621 
5622 	il->ops->init_alive_start(il);
5623 out:
5624 	mutex_unlock(&il->mutex);
5625 }
5626 
5627 static void
5628 il4965_bg_alive_start(struct work_struct *data)
5629 {
5630 	struct il_priv *il =
5631 	    container_of(data, struct il_priv, alive_start.work);
5632 
5633 	mutex_lock(&il->mutex);
5634 	if (test_bit(S_EXIT_PENDING, &il->status))
5635 		goto out;
5636 
5637 	il4965_alive_start(il);
5638 out:
5639 	mutex_unlock(&il->mutex);
5640 }
5641 
5642 static void
5643 il4965_bg_run_time_calib_work(struct work_struct *work)
5644 {
5645 	struct il_priv *il = container_of(work, struct il_priv,
5646 					  run_time_calib_work);
5647 
5648 	mutex_lock(&il->mutex);
5649 
5650 	if (test_bit(S_EXIT_PENDING, &il->status) ||
5651 	    test_bit(S_SCANNING, &il->status)) {
5652 		mutex_unlock(&il->mutex);
5653 		return;
5654 	}
5655 
5656 	if (il->start_calib) {
5657 		il4965_chain_noise_calibration(il, (void *)&il->_4965.stats);
5658 		il4965_sensitivity_calibration(il, (void *)&il->_4965.stats);
5659 	}
5660 
5661 	mutex_unlock(&il->mutex);
5662 }
5663 
5664 static void
5665 il4965_bg_restart(struct work_struct *data)
5666 {
5667 	struct il_priv *il = container_of(data, struct il_priv, restart);
5668 
5669 	if (test_bit(S_EXIT_PENDING, &il->status))
5670 		return;
5671 
5672 	if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
5673 		mutex_lock(&il->mutex);
5674 		il->is_open = 0;
5675 
5676 		__il4965_down(il);
5677 
5678 		mutex_unlock(&il->mutex);
5679 		il4965_cancel_deferred_work(il);
5680 		ieee80211_restart_hw(il->hw);
5681 	} else {
5682 		il4965_down(il);
5683 
5684 		mutex_lock(&il->mutex);
5685 		if (test_bit(S_EXIT_PENDING, &il->status)) {
5686 			mutex_unlock(&il->mutex);
5687 			return;
5688 		}
5689 
5690 		__il4965_up(il);
5691 		mutex_unlock(&il->mutex);
5692 	}
5693 }
5694 
5695 static void
5696 il4965_bg_rx_replenish(struct work_struct *data)
5697 {
5698 	struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
5699 
5700 	if (test_bit(S_EXIT_PENDING, &il->status))
5701 		return;
5702 
5703 	mutex_lock(&il->mutex);
5704 	il4965_rx_replenish(il);
5705 	mutex_unlock(&il->mutex);
5706 }
5707 
5708 /*****************************************************************************
5709  *
5710  * mac80211 entry point functions
5711  *
5712  *****************************************************************************/
5713 
5714 #define UCODE_READY_TIMEOUT	(4 * HZ)
5715 
5716 /*
5717  * Not a mac80211 entry point function, but it fits in with all the
5718  * other mac80211 functions grouped here.
5719  */
5720 static int
5721 il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length)
5722 {
5723 	int ret;
5724 	struct ieee80211_hw *hw = il->hw;
5725 
5726 	hw->rate_control_algorithm = "iwl-4965-rs";
5727 
5728 	/* Tell mac80211 our characteristics */
5729 	ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
5730 	ieee80211_hw_set(hw, SUPPORTS_PS);
5731 	ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
5732 	ieee80211_hw_set(hw, SPECTRUM_MGMT);
5733 	ieee80211_hw_set(hw, NEED_DTIM_BEFORE_ASSOC);
5734 	ieee80211_hw_set(hw, SIGNAL_DBM);
5735 	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
5736 	if (il->cfg->sku & IL_SKU_N)
5737 		hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS |
5738 				       NL80211_FEATURE_STATIC_SMPS;
5739 
5740 	hw->sta_data_size = sizeof(struct il_station_priv);
5741 	hw->vif_data_size = sizeof(struct il_vif_priv);
5742 
5743 	hw->wiphy->interface_modes =
5744 	    BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
5745 
5746 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
5747 	hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
5748 				       REGULATORY_DISABLE_BEACON_HINTS;
5749 
5750 	/*
5751 	 * For now, disable PS by default because it affects
5752 	 * RX performance significantly.
5753 	 */
5754 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
5755 
5756 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
5757 	/* we create the 802.11 header and a zero-length SSID element */
5758 	hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2;
5759 
5760 	/* Default value; 4 EDCA QOS priorities */
5761 	hw->queues = 4;
5762 
5763 	hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL;
5764 
5765 	if (il->bands[NL80211_BAND_2GHZ].n_channels)
5766 		il->hw->wiphy->bands[NL80211_BAND_2GHZ] =
5767 		    &il->bands[NL80211_BAND_2GHZ];
5768 	if (il->bands[NL80211_BAND_5GHZ].n_channels)
5769 		il->hw->wiphy->bands[NL80211_BAND_5GHZ] =
5770 		    &il->bands[NL80211_BAND_5GHZ];
5771 
5772 	il_leds_init(il);
5773 
5774 	wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
5775 
5776 	ret = ieee80211_register_hw(il->hw);
5777 	if (ret) {
5778 		IL_ERR("Failed to register hw (error %d)\n", ret);
5779 		return ret;
5780 	}
5781 	il->mac80211_registered = 1;
5782 
5783 	return 0;
5784 }
5785 
5786 int
5787 il4965_mac_start(struct ieee80211_hw *hw)
5788 {
5789 	struct il_priv *il = hw->priv;
5790 	int ret;
5791 
5792 	D_MAC80211("enter\n");
5793 
5794 	/* we should be verifying the device is ready to be opened */
5795 	mutex_lock(&il->mutex);
5796 	ret = __il4965_up(il);
5797 	mutex_unlock(&il->mutex);
5798 
5799 	if (ret)
5800 		return ret;
5801 
5802 	if (il_is_rfkill(il))
5803 		goto out;
5804 
5805 	D_INFO("Start UP work done.\n");
5806 
5807 	/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
5808 	 * mac80211 will not be run successfully. */
5809 	ret = wait_event_timeout(il->wait_command_queue,
5810 				 test_bit(S_READY, &il->status),
5811 				 UCODE_READY_TIMEOUT);
5812 	if (!ret) {
5813 		if (!test_bit(S_READY, &il->status)) {
5814 			IL_ERR("START_ALIVE timeout after %dms.\n",
5815 				jiffies_to_msecs(UCODE_READY_TIMEOUT));
5816 			return -ETIMEDOUT;
5817 		}
5818 	}
5819 
5820 	il4965_led_enable(il);
5821 
5822 out:
5823 	il->is_open = 1;
5824 	D_MAC80211("leave\n");
5825 	return 0;
5826 }
5827 
5828 void
5829 il4965_mac_stop(struct ieee80211_hw *hw)
5830 {
5831 	struct il_priv *il = hw->priv;
5832 
5833 	D_MAC80211("enter\n");
5834 
5835 	if (!il->is_open)
5836 		return;
5837 
5838 	il->is_open = 0;
5839 
5840 	il4965_down(il);
5841 
5842 	flush_workqueue(il->workqueue);
5843 
5844 	/* User space software may expect getting rfkill changes
5845 	 * even if interface is down */
5846 	_il_wr(il, CSR_INT, 0xFFFFFFFF);
5847 	il_enable_rfkill_int(il);
5848 
5849 	D_MAC80211("leave\n");
5850 }
5851 
5852 void
5853 il4965_mac_tx(struct ieee80211_hw *hw,
5854 	      struct ieee80211_tx_control *control,
5855 	      struct sk_buff *skb)
5856 {
5857 	struct il_priv *il = hw->priv;
5858 
5859 	D_MACDUMP("enter\n");
5860 
5861 	D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
5862 	     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
5863 
5864 	if (il4965_tx_skb(il, control->sta, skb))
5865 		dev_kfree_skb_any(skb);
5866 
5867 	D_MACDUMP("leave\n");
5868 }
5869 
5870 void
5871 il4965_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
5872 			   struct ieee80211_key_conf *keyconf,
5873 			   struct ieee80211_sta *sta, u32 iv32, u16 * phase1key)
5874 {
5875 	struct il_priv *il = hw->priv;
5876 
5877 	D_MAC80211("enter\n");
5878 
5879 	il4965_update_tkip_key(il, keyconf, sta, iv32, phase1key);
5880 
5881 	D_MAC80211("leave\n");
5882 }
5883 
5884 int
5885 il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
5886 		   struct ieee80211_vif *vif, struct ieee80211_sta *sta,
5887 		   struct ieee80211_key_conf *key)
5888 {
5889 	struct il_priv *il = hw->priv;
5890 	int ret;
5891 	u8 sta_id;
5892 	bool is_default_wep_key = false;
5893 
5894 	D_MAC80211("enter\n");
5895 
5896 	if (il->cfg->mod_params->sw_crypto) {
5897 		D_MAC80211("leave - hwcrypto disabled\n");
5898 		return -EOPNOTSUPP;
5899 	}
5900 
5901 	/*
5902 	 * To support IBSS RSN, don't program group keys in IBSS, the
5903 	 * hardware will then not attempt to decrypt the frames.
5904 	 */
5905 	if (vif->type == NL80211_IFTYPE_ADHOC &&
5906 	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
5907 		D_MAC80211("leave - ad-hoc group key\n");
5908 		return -EOPNOTSUPP;
5909 	}
5910 
5911 	sta_id = il_sta_id_or_broadcast(il, sta);
5912 	if (sta_id == IL_INVALID_STATION)
5913 		return -EINVAL;
5914 
5915 	mutex_lock(&il->mutex);
5916 	il_scan_cancel_timeout(il, 100);
5917 
5918 	/*
5919 	 * If we are getting WEP group key and we didn't receive any key mapping
5920 	 * so far, we are in legacy wep mode (group key only), otherwise we are
5921 	 * in 1X mode.
5922 	 * In legacy wep mode, we use another host command to the uCode.
5923 	 */
5924 	if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
5925 	     key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) {
5926 		if (cmd == SET_KEY)
5927 			is_default_wep_key = !il->_4965.key_mapping_keys;
5928 		else
5929 			is_default_wep_key =
5930 			    (key->hw_key_idx == HW_KEY_DEFAULT);
5931 	}
5932 
5933 	switch (cmd) {
5934 	case SET_KEY:
5935 		if (is_default_wep_key)
5936 			ret = il4965_set_default_wep_key(il, key);
5937 		else
5938 			ret = il4965_set_dynamic_key(il, key, sta_id);
5939 
5940 		D_MAC80211("enable hwcrypto key\n");
5941 		break;
5942 	case DISABLE_KEY:
5943 		if (is_default_wep_key)
5944 			ret = il4965_remove_default_wep_key(il, key);
5945 		else
5946 			ret = il4965_remove_dynamic_key(il, key, sta_id);
5947 
5948 		D_MAC80211("disable hwcrypto key\n");
5949 		break;
5950 	default:
5951 		ret = -EINVAL;
5952 	}
5953 
5954 	mutex_unlock(&il->mutex);
5955 	D_MAC80211("leave\n");
5956 
5957 	return ret;
5958 }
5959 
5960 int
5961 il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
5962 			struct ieee80211_ampdu_params *params)
5963 {
5964 	struct il_priv *il = hw->priv;
5965 	int ret = -EINVAL;
5966 	struct ieee80211_sta *sta = params->sta;
5967 	enum ieee80211_ampdu_mlme_action action = params->action;
5968 	u16 tid = params->tid;
5969 	u16 *ssn = &params->ssn;
5970 
5971 	D_HT("A-MPDU action on addr %pM tid %d\n", sta->addr, tid);
5972 
5973 	if (!(il->cfg->sku & IL_SKU_N))
5974 		return -EACCES;
5975 
5976 	mutex_lock(&il->mutex);
5977 
5978 	switch (action) {
5979 	case IEEE80211_AMPDU_RX_START:
5980 		D_HT("start Rx\n");
5981 		ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn);
5982 		break;
5983 	case IEEE80211_AMPDU_RX_STOP:
5984 		D_HT("stop Rx\n");
5985 		ret = il4965_sta_rx_agg_stop(il, sta, tid);
5986 		if (test_bit(S_EXIT_PENDING, &il->status))
5987 			ret = 0;
5988 		break;
5989 	case IEEE80211_AMPDU_TX_START:
5990 		D_HT("start Tx\n");
5991 		ret = il4965_tx_agg_start(il, vif, sta, tid, ssn);
5992 		break;
5993 	case IEEE80211_AMPDU_TX_STOP_CONT:
5994 	case IEEE80211_AMPDU_TX_STOP_FLUSH:
5995 	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
5996 		D_HT("stop Tx\n");
5997 		ret = il4965_tx_agg_stop(il, vif, sta, tid);
5998 		if (test_bit(S_EXIT_PENDING, &il->status))
5999 			ret = 0;
6000 		break;
6001 	case IEEE80211_AMPDU_TX_OPERATIONAL:
6002 		ret = 0;
6003 		break;
6004 	}
6005 	mutex_unlock(&il->mutex);
6006 
6007 	return ret;
6008 }
6009 
6010 int
6011 il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
6012 		   struct ieee80211_sta *sta)
6013 {
6014 	struct il_priv *il = hw->priv;
6015 	struct il_station_priv *sta_priv = (void *)sta->drv_priv;
6016 	bool is_ap = vif->type == NL80211_IFTYPE_STATION;
6017 	int ret;
6018 	u8 sta_id;
6019 
6020 	D_INFO("received request to add station %pM\n", sta->addr);
6021 	mutex_lock(&il->mutex);
6022 	D_INFO("proceeding to add station %pM\n", sta->addr);
6023 	sta_priv->common.sta_id = IL_INVALID_STATION;
6024 
6025 	atomic_set(&sta_priv->pending_frames, 0);
6026 
6027 	ret =
6028 	    il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
6029 	if (ret) {
6030 		IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
6031 		/* Should we return success if return code is EEXIST ? */
6032 		mutex_unlock(&il->mutex);
6033 		return ret;
6034 	}
6035 
6036 	sta_priv->common.sta_id = sta_id;
6037 
6038 	/* Initialize rate scaling */
6039 	D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
6040 	il4965_rs_rate_init(il, sta, sta_id);
6041 	mutex_unlock(&il->mutex);
6042 
6043 	return 0;
6044 }
6045 
6046 void
6047 il4965_mac_channel_switch(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
6048 			  struct ieee80211_channel_switch *ch_switch)
6049 {
6050 	struct il_priv *il = hw->priv;
6051 	const struct il_channel_info *ch_info;
6052 	struct ieee80211_conf *conf = &hw->conf;
6053 	struct ieee80211_channel *channel = ch_switch->chandef.chan;
6054 	struct il_ht_config *ht_conf = &il->current_ht_config;
6055 	u16 ch;
6056 
6057 	D_MAC80211("enter\n");
6058 
6059 	mutex_lock(&il->mutex);
6060 
6061 	if (il_is_rfkill(il))
6062 		goto out;
6063 
6064 	if (test_bit(S_EXIT_PENDING, &il->status) ||
6065 	    test_bit(S_SCANNING, &il->status) ||
6066 	    test_bit(S_CHANNEL_SWITCH_PENDING, &il->status))
6067 		goto out;
6068 
6069 	if (!il_is_associated(il))
6070 		goto out;
6071 
6072 	if (!il->ops->set_channel_switch)
6073 		goto out;
6074 
6075 	ch = channel->hw_value;
6076 	if (le16_to_cpu(il->active.channel) == ch)
6077 		goto out;
6078 
6079 	ch_info = il_get_channel_info(il, channel->band, ch);
6080 	if (!il_is_channel_valid(ch_info)) {
6081 		D_MAC80211("invalid channel\n");
6082 		goto out;
6083 	}
6084 
6085 	spin_lock_irq(&il->lock);
6086 
6087 	il->current_ht_config.smps = conf->smps_mode;
6088 
6089 	/* Configure HT40 channels */
6090 	switch (cfg80211_get_chandef_type(&ch_switch->chandef)) {
6091 	case NL80211_CHAN_NO_HT:
6092 	case NL80211_CHAN_HT20:
6093 		il->ht.is_40mhz = false;
6094 		il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
6095 		break;
6096 	case NL80211_CHAN_HT40MINUS:
6097 		il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
6098 		il->ht.is_40mhz = true;
6099 		break;
6100 	case NL80211_CHAN_HT40PLUS:
6101 		il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
6102 		il->ht.is_40mhz = true;
6103 		break;
6104 	}
6105 
6106 	if ((le16_to_cpu(il->staging.channel) != ch))
6107 		il->staging.flags = 0;
6108 
6109 	il_set_rxon_channel(il, channel);
6110 	il_set_rxon_ht(il, ht_conf);
6111 	il_set_flags_for_band(il, channel->band, il->vif);
6112 
6113 	spin_unlock_irq(&il->lock);
6114 
6115 	il_set_rate(il);
6116 	/*
6117 	 * at this point, staging_rxon has the
6118 	 * configuration for channel switch
6119 	 */
6120 	set_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
6121 	il->switch_channel = cpu_to_le16(ch);
6122 	if (il->ops->set_channel_switch(il, ch_switch)) {
6123 		clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
6124 		il->switch_channel = 0;
6125 		ieee80211_chswitch_done(il->vif, false);
6126 	}
6127 
6128 out:
6129 	mutex_unlock(&il->mutex);
6130 	D_MAC80211("leave\n");
6131 }
6132 
6133 void
6134 il4965_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
6135 			unsigned int *total_flags, u64 multicast)
6136 {
6137 	struct il_priv *il = hw->priv;
6138 	__le32 filter_or = 0, filter_nand = 0;
6139 
6140 #define CHK(test, flag)	do { \
6141 	if (*total_flags & (test))		\
6142 		filter_or |= (flag);		\
6143 	else					\
6144 		filter_nand |= (flag);		\
6145 	} while (0)
6146 
6147 	D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
6148 		   *total_flags);
6149 
6150 	CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK);
6151 	/* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
6152 	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
6153 	CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
6154 
6155 #undef CHK
6156 
6157 	mutex_lock(&il->mutex);
6158 
6159 	il->staging.filter_flags &= ~filter_nand;
6160 	il->staging.filter_flags |= filter_or;
6161 
6162 	/*
6163 	 * Not committing directly because hardware can perform a scan,
6164 	 * but we'll eventually commit the filter flags change anyway.
6165 	 */
6166 
6167 	mutex_unlock(&il->mutex);
6168 
6169 	/*
6170 	 * Receiving all multicast frames is always enabled by the
6171 	 * default flags setup in il_connection_init_rx_config()
6172 	 * since we currently do not support programming multicast
6173 	 * filters into the device.
6174 	 */
6175 	*total_flags &=
6176 	    FIF_OTHER_BSS | FIF_ALLMULTI |
6177 	    FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
6178 }
6179 
6180 /*****************************************************************************
6181  *
6182  * driver setup and teardown
6183  *
6184  *****************************************************************************/
6185 
6186 static void
6187 il4965_bg_txpower_work(struct work_struct *work)
6188 {
6189 	struct il_priv *il = container_of(work, struct il_priv,
6190 					  txpower_work);
6191 
6192 	mutex_lock(&il->mutex);
6193 
6194 	/* If a scan happened to start before we got here
6195 	 * then just return; the stats notification will
6196 	 * kick off another scheduled work to compensate for
6197 	 * any temperature delta we missed here. */
6198 	if (test_bit(S_EXIT_PENDING, &il->status) ||
6199 	    test_bit(S_SCANNING, &il->status))
6200 		goto out;
6201 
6202 	/* Regardless of if we are associated, we must reconfigure the
6203 	 * TX power since frames can be sent on non-radar channels while
6204 	 * not associated */
6205 	il->ops->send_tx_power(il);
6206 
6207 	/* Update last_temperature to keep is_calib_needed from running
6208 	 * when it isn't needed... */
6209 	il->last_temperature = il->temperature;
6210 out:
6211 	mutex_unlock(&il->mutex);
6212 }
6213 
6214 static void
6215 il4965_setup_deferred_work(struct il_priv *il)
6216 {
6217 	il->workqueue = create_singlethread_workqueue(DRV_NAME);
6218 
6219 	init_waitqueue_head(&il->wait_command_queue);
6220 
6221 	INIT_WORK(&il->restart, il4965_bg_restart);
6222 	INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish);
6223 	INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work);
6224 	INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start);
6225 	INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start);
6226 
6227 	il_setup_scan_deferred_work(il);
6228 
6229 	INIT_WORK(&il->txpower_work, il4965_bg_txpower_work);
6230 
6231 	timer_setup(&il->stats_periodic, il4965_bg_stats_periodic, 0);
6232 
6233 	timer_setup(&il->watchdog, il_bg_watchdog, 0);
6234 
6235 	tasklet_setup(&il->irq_tasklet, il4965_irq_tasklet);
6236 }
6237 
6238 static void
6239 il4965_cancel_deferred_work(struct il_priv *il)
6240 {
6241 	cancel_work_sync(&il->txpower_work);
6242 	cancel_delayed_work_sync(&il->init_alive_start);
6243 	cancel_delayed_work(&il->alive_start);
6244 	cancel_work_sync(&il->run_time_calib_work);
6245 
6246 	il_cancel_scan_deferred_work(il);
6247 
6248 	del_timer_sync(&il->stats_periodic);
6249 }
6250 
6251 static void
6252 il4965_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
6253 {
6254 	int i;
6255 
6256 	for (i = 0; i < RATE_COUNT_LEGACY; i++) {
6257 		rates[i].bitrate = il_rates[i].ieee * 5;
6258 		rates[i].hw_value = i;	/* Rate scaling will work on idxes */
6259 		rates[i].hw_value_short = i;
6260 		rates[i].flags = 0;
6261 		if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) {
6262 			/*
6263 			 * If CCK != 1M then set short preamble rate flag.
6264 			 */
6265 			rates[i].flags |=
6266 			    (il_rates[i].plcp ==
6267 			     RATE_1M_PLCP) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
6268 		}
6269 	}
6270 }
6271 
6272 /*
6273  * Acquire il->lock before calling this function !
6274  */
6275 void
6276 il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx)
6277 {
6278 	il_wr(il, HBUS_TARG_WRPTR, (idx & 0xff) | (txq_id << 8));
6279 	il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx);
6280 }
6281 
6282 void
6283 il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq,
6284 			   int tx_fifo_id, int scd_retry)
6285 {
6286 	int txq_id = txq->q.id;
6287 
6288 	/* Find out whether to activate Tx queue */
6289 	int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0;
6290 
6291 	/* Set up and activate */
6292 	il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
6293 		   (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
6294 		   (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) |
6295 		   (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) |
6296 		   (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
6297 		   IL49_SCD_QUEUE_STTS_REG_MSK);
6298 
6299 	txq->sched_retry = scd_retry;
6300 
6301 	D_INFO("%s %s Queue %d on AC %d\n", active ? "Activate" : "Deactivate",
6302 	       scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
6303 }
6304 
6305 static const struct ieee80211_ops il4965_mac_ops = {
6306 	.tx = il4965_mac_tx,
6307 	.start = il4965_mac_start,
6308 	.stop = il4965_mac_stop,
6309 	.add_interface = il_mac_add_interface,
6310 	.remove_interface = il_mac_remove_interface,
6311 	.change_interface = il_mac_change_interface,
6312 	.config = il_mac_config,
6313 	.configure_filter = il4965_configure_filter,
6314 	.set_key = il4965_mac_set_key,
6315 	.update_tkip_key = il4965_mac_update_tkip_key,
6316 	.conf_tx = il_mac_conf_tx,
6317 	.reset_tsf = il_mac_reset_tsf,
6318 	.bss_info_changed = il_mac_bss_info_changed,
6319 	.ampdu_action = il4965_mac_ampdu_action,
6320 	.hw_scan = il_mac_hw_scan,
6321 	.sta_add = il4965_mac_sta_add,
6322 	.sta_remove = il_mac_sta_remove,
6323 	.channel_switch = il4965_mac_channel_switch,
6324 	.tx_last_beacon = il_mac_tx_last_beacon,
6325 	.flush = il_mac_flush,
6326 };
6327 
6328 static int
6329 il4965_init_drv(struct il_priv *il)
6330 {
6331 	int ret;
6332 
6333 	spin_lock_init(&il->sta_lock);
6334 	spin_lock_init(&il->hcmd_lock);
6335 
6336 	INIT_LIST_HEAD(&il->free_frames);
6337 
6338 	mutex_init(&il->mutex);
6339 
6340 	il->ieee_channels = NULL;
6341 	il->ieee_rates = NULL;
6342 	il->band = NL80211_BAND_2GHZ;
6343 
6344 	il->iw_mode = NL80211_IFTYPE_STATION;
6345 	il->current_ht_config.smps = IEEE80211_SMPS_STATIC;
6346 	il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
6347 
6348 	/* initialize force reset */
6349 	il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
6350 
6351 	/* Choose which receivers/antennas to use */
6352 	if (il->ops->set_rxon_chain)
6353 		il->ops->set_rxon_chain(il);
6354 
6355 	il_init_scan_params(il);
6356 
6357 	ret = il_init_channel_map(il);
6358 	if (ret) {
6359 		IL_ERR("initializing regulatory failed: %d\n", ret);
6360 		goto err;
6361 	}
6362 
6363 	ret = il_init_geos(il);
6364 	if (ret) {
6365 		IL_ERR("initializing geos failed: %d\n", ret);
6366 		goto err_free_channel_map;
6367 	}
6368 	il4965_init_hw_rates(il, il->ieee_rates);
6369 
6370 	return 0;
6371 
6372 err_free_channel_map:
6373 	il_free_channel_map(il);
6374 err:
6375 	return ret;
6376 }
6377 
6378 static void
6379 il4965_uninit_drv(struct il_priv *il)
6380 {
6381 	il_free_geos(il);
6382 	il_free_channel_map(il);
6383 	kfree(il->scan_cmd);
6384 }
6385 
6386 static void
6387 il4965_hw_detect(struct il_priv *il)
6388 {
6389 	il->hw_rev = _il_rd(il, CSR_HW_REV);
6390 	il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG);
6391 	il->rev_id = il->pci_dev->revision;
6392 	D_INFO("HW Revision ID = 0x%X\n", il->rev_id);
6393 }
6394 
6395 static const struct il_sensitivity_ranges il4965_sensitivity = {
6396 	.min_nrg_cck = 97,
6397 	.max_nrg_cck = 0,	/* not used, set to 0 */
6398 
6399 	.auto_corr_min_ofdm = 85,
6400 	.auto_corr_min_ofdm_mrc = 170,
6401 	.auto_corr_min_ofdm_x1 = 105,
6402 	.auto_corr_min_ofdm_mrc_x1 = 220,
6403 
6404 	.auto_corr_max_ofdm = 120,
6405 	.auto_corr_max_ofdm_mrc = 210,
6406 	.auto_corr_max_ofdm_x1 = 140,
6407 	.auto_corr_max_ofdm_mrc_x1 = 270,
6408 
6409 	.auto_corr_min_cck = 125,
6410 	.auto_corr_max_cck = 200,
6411 	.auto_corr_min_cck_mrc = 200,
6412 	.auto_corr_max_cck_mrc = 400,
6413 
6414 	.nrg_th_cck = 100,
6415 	.nrg_th_ofdm = 100,
6416 
6417 	.barker_corr_th_min = 190,
6418 	.barker_corr_th_min_mrc = 390,
6419 	.nrg_th_cca = 62,
6420 };
6421 
6422 static void
6423 il4965_set_hw_params(struct il_priv *il)
6424 {
6425 	il->hw_params.bcast_id = IL4965_BROADCAST_ID;
6426 	il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
6427 	il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
6428 	if (il->cfg->mod_params->amsdu_size_8K)
6429 		il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K);
6430 	else
6431 		il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K);
6432 
6433 	il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL;
6434 
6435 	if (il->cfg->mod_params->disable_11n)
6436 		il->cfg->sku &= ~IL_SKU_N;
6437 
6438 	if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES &&
6439 	    il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES)
6440 		il->cfg->num_of_queues =
6441 		    il->cfg->mod_params->num_of_queues;
6442 
6443 	il->hw_params.max_txq_num = il->cfg->num_of_queues;
6444 	il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
6445 	il->hw_params.scd_bc_tbls_size =
6446 	    il->cfg->num_of_queues *
6447 	    sizeof(struct il4965_scd_bc_tbl);
6448 
6449 	il->hw_params.tfd_size = sizeof(struct il_tfd);
6450 	il->hw_params.max_stations = IL4965_STATION_COUNT;
6451 	il->hw_params.max_data_size = IL49_RTC_DATA_SIZE;
6452 	il->hw_params.max_inst_size = IL49_RTC_INST_SIZE;
6453 	il->hw_params.max_bsm_size = BSM_SRAM_SIZE;
6454 	il->hw_params.ht40_channel = BIT(NL80211_BAND_5GHZ);
6455 
6456 	il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR;
6457 
6458 	il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant);
6459 	il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant);
6460 	il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant;
6461 	il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant;
6462 
6463 	il->hw_params.ct_kill_threshold =
6464 	   celsius_to_kelvin(CT_KILL_THRESHOLD_LEGACY);
6465 
6466 	il->hw_params.sens = &il4965_sensitivity;
6467 	il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS;
6468 }
6469 
6470 static int
6471 il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
6472 {
6473 	int err = 0;
6474 	struct il_priv *il;
6475 	struct ieee80211_hw *hw;
6476 	struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
6477 	unsigned long flags;
6478 	u16 pci_cmd;
6479 
6480 	/************************
6481 	 * 1. Allocating HW data
6482 	 ************************/
6483 
6484 	hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il4965_mac_ops);
6485 	if (!hw) {
6486 		err = -ENOMEM;
6487 		goto out;
6488 	}
6489 	il = hw->priv;
6490 	il->hw = hw;
6491 	SET_IEEE80211_DEV(hw, &pdev->dev);
6492 
6493 	D_INFO("*** LOAD DRIVER ***\n");
6494 	il->cfg = cfg;
6495 	il->ops = &il4965_ops;
6496 #ifdef CONFIG_IWLEGACY_DEBUGFS
6497 	il->debugfs_ops = &il4965_debugfs_ops;
6498 #endif
6499 	il->pci_dev = pdev;
6500 	il->inta_mask = CSR_INI_SET_MASK;
6501 
6502 	/**************************
6503 	 * 2. Initializing PCI bus
6504 	 **************************/
6505 	pci_disable_link_state(pdev,
6506 			       PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
6507 			       PCIE_LINK_STATE_CLKPM);
6508 
6509 	if (pci_enable_device(pdev)) {
6510 		err = -ENODEV;
6511 		goto out_ieee80211_free_hw;
6512 	}
6513 
6514 	pci_set_master(pdev);
6515 
6516 	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(36));
6517 	if (err) {
6518 		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
6519 		/* both attempts failed: */
6520 		if (err) {
6521 			IL_WARN("No suitable DMA available.\n");
6522 			goto out_pci_disable_device;
6523 		}
6524 	}
6525 
6526 	err = pci_request_regions(pdev, DRV_NAME);
6527 	if (err)
6528 		goto out_pci_disable_device;
6529 
6530 	pci_set_drvdata(pdev, il);
6531 
6532 	/***********************
6533 	 * 3. Read REV register
6534 	 ***********************/
6535 	il->hw_base = pci_ioremap_bar(pdev, 0);
6536 	if (!il->hw_base) {
6537 		err = -ENODEV;
6538 		goto out_pci_release_regions;
6539 	}
6540 
6541 	D_INFO("pci_resource_len = 0x%08llx\n",
6542 	       (unsigned long long)pci_resource_len(pdev, 0));
6543 	D_INFO("pci_resource_base = %p\n", il->hw_base);
6544 
6545 	/* these spin locks will be used in apm_ops.init and EEPROM access
6546 	 * we should init now
6547 	 */
6548 	spin_lock_init(&il->reg_lock);
6549 	spin_lock_init(&il->lock);
6550 
6551 	/*
6552 	 * stop and reset the on-board processor just in case it is in a
6553 	 * strange state ... like being left stranded by a primary kernel
6554 	 * and this is now the kdump kernel trying to start up
6555 	 */
6556 	_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
6557 
6558 	il4965_hw_detect(il);
6559 	IL_INFO("Detected %s, REV=0x%X\n", il->cfg->name, il->hw_rev);
6560 
6561 	/* We disable the RETRY_TIMEOUT register (0x41) to keep
6562 	 * PCI Tx retries from interfering with C3 CPU state */
6563 	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
6564 
6565 	il4965_prepare_card_hw(il);
6566 	if (!il->hw_ready) {
6567 		IL_WARN("Failed, HW not ready\n");
6568 		err = -EIO;
6569 		goto out_iounmap;
6570 	}
6571 
6572 	/*****************
6573 	 * 4. Read EEPROM
6574 	 *****************/
6575 	/* Read the EEPROM */
6576 	err = il_eeprom_init(il);
6577 	if (err) {
6578 		IL_ERR("Unable to init EEPROM\n");
6579 		goto out_iounmap;
6580 	}
6581 	err = il4965_eeprom_check_version(il);
6582 	if (err)
6583 		goto out_free_eeprom;
6584 
6585 	/* extract MAC Address */
6586 	il4965_eeprom_get_mac(il, il->addresses[0].addr);
6587 	D_INFO("MAC address: %pM\n", il->addresses[0].addr);
6588 	il->hw->wiphy->addresses = il->addresses;
6589 	il->hw->wiphy->n_addresses = 1;
6590 
6591 	/************************
6592 	 * 5. Setup HW constants
6593 	 ************************/
6594 	il4965_set_hw_params(il);
6595 
6596 	/*******************
6597 	 * 6. Setup il
6598 	 *******************/
6599 
6600 	err = il4965_init_drv(il);
6601 	if (err)
6602 		goto out_free_eeprom;
6603 	/* At this point both hw and il are initialized. */
6604 
6605 	/********************
6606 	 * 7. Setup services
6607 	 ********************/
6608 	spin_lock_irqsave(&il->lock, flags);
6609 	il_disable_interrupts(il);
6610 	spin_unlock_irqrestore(&il->lock, flags);
6611 
6612 	pci_enable_msi(il->pci_dev);
6613 
6614 	err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
6615 	if (err) {
6616 		IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
6617 		goto out_disable_msi;
6618 	}
6619 
6620 	il4965_setup_deferred_work(il);
6621 	il4965_setup_handlers(il);
6622 
6623 	/*********************************************
6624 	 * 8. Enable interrupts and read RFKILL state
6625 	 *********************************************/
6626 
6627 	/* enable rfkill interrupt: hw bug w/a */
6628 	pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd);
6629 	if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
6630 		pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
6631 		pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd);
6632 	}
6633 
6634 	il_enable_rfkill_int(il);
6635 
6636 	/* If platform's RF_KILL switch is NOT set to KILL */
6637 	if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
6638 		clear_bit(S_RFKILL, &il->status);
6639 	else
6640 		set_bit(S_RFKILL, &il->status);
6641 
6642 	wiphy_rfkill_set_hw_state(il->hw->wiphy,
6643 				  test_bit(S_RFKILL, &il->status));
6644 
6645 	il_power_initialize(il);
6646 
6647 	init_completion(&il->_4965.firmware_loading_complete);
6648 
6649 	err = il4965_request_firmware(il, true);
6650 	if (err)
6651 		goto out_destroy_workqueue;
6652 
6653 	return 0;
6654 
6655 out_destroy_workqueue:
6656 	destroy_workqueue(il->workqueue);
6657 	il->workqueue = NULL;
6658 	free_irq(il->pci_dev->irq, il);
6659 out_disable_msi:
6660 	pci_disable_msi(il->pci_dev);
6661 	il4965_uninit_drv(il);
6662 out_free_eeprom:
6663 	il_eeprom_free(il);
6664 out_iounmap:
6665 	iounmap(il->hw_base);
6666 out_pci_release_regions:
6667 	pci_release_regions(pdev);
6668 out_pci_disable_device:
6669 	pci_disable_device(pdev);
6670 out_ieee80211_free_hw:
6671 	ieee80211_free_hw(il->hw);
6672 out:
6673 	return err;
6674 }
6675 
6676 static void
6677 il4965_pci_remove(struct pci_dev *pdev)
6678 {
6679 	struct il_priv *il = pci_get_drvdata(pdev);
6680 	unsigned long flags;
6681 
6682 	if (!il)
6683 		return;
6684 
6685 	wait_for_completion(&il->_4965.firmware_loading_complete);
6686 
6687 	D_INFO("*** UNLOAD DRIVER ***\n");
6688 
6689 	il_dbgfs_unregister(il);
6690 	sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group);
6691 
6692 	/* ieee80211_unregister_hw call wil cause il_mac_stop to
6693 	 * to be called and il4965_down since we are removing the device
6694 	 * we need to set S_EXIT_PENDING bit.
6695 	 */
6696 	set_bit(S_EXIT_PENDING, &il->status);
6697 
6698 	il_leds_exit(il);
6699 
6700 	if (il->mac80211_registered) {
6701 		ieee80211_unregister_hw(il->hw);
6702 		il->mac80211_registered = 0;
6703 	} else {
6704 		il4965_down(il);
6705 	}
6706 
6707 	/*
6708 	 * Make sure device is reset to low power before unloading driver.
6709 	 * This may be redundant with il4965_down(), but there are paths to
6710 	 * run il4965_down() without calling apm_ops.stop(), and there are
6711 	 * paths to avoid running il4965_down() at all before leaving driver.
6712 	 * This (inexpensive) call *makes sure* device is reset.
6713 	 */
6714 	il_apm_stop(il);
6715 
6716 	/* make sure we flush any pending irq or
6717 	 * tasklet for the driver
6718 	 */
6719 	spin_lock_irqsave(&il->lock, flags);
6720 	il_disable_interrupts(il);
6721 	spin_unlock_irqrestore(&il->lock, flags);
6722 
6723 	il4965_synchronize_irq(il);
6724 
6725 	il4965_dealloc_ucode_pci(il);
6726 
6727 	if (il->rxq.bd)
6728 		il4965_rx_queue_free(il, &il->rxq);
6729 	il4965_hw_txq_ctx_free(il);
6730 
6731 	il_eeprom_free(il);
6732 
6733 	/*netif_stop_queue(dev); */
6734 
6735 	/* ieee80211_unregister_hw calls il_mac_stop, which flushes
6736 	 * il->workqueue... so we can't take down the workqueue
6737 	 * until now... */
6738 	destroy_workqueue(il->workqueue);
6739 	il->workqueue = NULL;
6740 
6741 	free_irq(il->pci_dev->irq, il);
6742 	pci_disable_msi(il->pci_dev);
6743 	iounmap(il->hw_base);
6744 	pci_release_regions(pdev);
6745 	pci_disable_device(pdev);
6746 
6747 	il4965_uninit_drv(il);
6748 
6749 	dev_kfree_skb(il->beacon_skb);
6750 
6751 	ieee80211_free_hw(il->hw);
6752 }
6753 
6754 /*
6755  * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
6756  * must be called under il->lock and mac access
6757  */
6758 void
6759 il4965_txq_set_sched(struct il_priv *il, u32 mask)
6760 {
6761 	il_wr_prph(il, IL49_SCD_TXFACT, mask);
6762 }
6763 
6764 /*****************************************************************************
6765  *
6766  * driver and module entry point
6767  *
6768  *****************************************************************************/
6769 
6770 /* Hardware specific file defines the PCI IDs table for that hardware module */
6771 static const struct pci_device_id il4965_hw_card_ids[] = {
6772 	{IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)},
6773 	{IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)},
6774 	{0}
6775 };
6776 MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids);
6777 
6778 static struct pci_driver il4965_driver = {
6779 	.name = DRV_NAME,
6780 	.id_table = il4965_hw_card_ids,
6781 	.probe = il4965_pci_probe,
6782 	.remove = il4965_pci_remove,
6783 	.driver.pm = IL_LEGACY_PM_OPS,
6784 };
6785 
6786 static int __init
6787 il4965_init(void)
6788 {
6789 
6790 	int ret;
6791 	pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
6792 	pr_info(DRV_COPYRIGHT "\n");
6793 
6794 	ret = il4965_rate_control_register();
6795 	if (ret) {
6796 		pr_err("Unable to register rate control algorithm: %d\n", ret);
6797 		return ret;
6798 	}
6799 
6800 	ret = pci_register_driver(&il4965_driver);
6801 	if (ret) {
6802 		pr_err("Unable to initialize PCI module\n");
6803 		goto error_register;
6804 	}
6805 
6806 	return ret;
6807 
6808 error_register:
6809 	il4965_rate_control_unregister();
6810 	return ret;
6811 }
6812 
6813 static void __exit
6814 il4965_exit(void)
6815 {
6816 	pci_unregister_driver(&il4965_driver);
6817 	il4965_rate_control_unregister();
6818 }
6819 
6820 module_exit(il4965_exit);
6821 module_init(il4965_init);
6822 
6823 #ifdef CONFIG_IWLEGACY_DEBUG
6824 module_param_named(debug, il_debug_level, uint, 0644);
6825 MODULE_PARM_DESC(debug, "debug output mask");
6826 #endif
6827 
6828 module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, 0444);
6829 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
6830 module_param_named(queues_num, il4965_mod_params.num_of_queues, int, 0444);
6831 MODULE_PARM_DESC(queues_num, "number of hw queues.");
6832 module_param_named(11n_disable, il4965_mod_params.disable_11n, int, 0444);
6833 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
6834 module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int, 0444);
6835 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])");
6836 module_param_named(fw_restart, il4965_mod_params.restart_fw, int, 0444);
6837 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
6838