1 /****************************************************************************** 2 * 3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. 4 * 5 * Portions of this file are derived from the ipw3945 project, as well 6 * as portions of the ieee80211 subsystem header files. 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of version 2 of the GNU General Public License as 10 * published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 15 * more details. 16 * 17 * You should have received a copy of the GNU General Public License along with 18 * this program; if not, write to the Free Software Foundation, Inc., 19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA 20 * 21 * The full GNU General Public License is included in this distribution in the 22 * file called LICENSE. 23 * 24 * Contact Information: 25 * Intel Linux Wireless <ilw@linux.intel.com> 26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 27 * 28 *****************************************************************************/ 29 30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 31 32 #include <linux/kernel.h> 33 #include <linux/module.h> 34 #include <linux/init.h> 35 #include <linux/pci.h> 36 #include <linux/pci-aspm.h> 37 #include <linux/slab.h> 38 #include <linux/dma-mapping.h> 39 #include <linux/delay.h> 40 #include <linux/sched.h> 41 #include <linux/skbuff.h> 42 #include <linux/netdevice.h> 43 #include <linux/firmware.h> 44 #include <linux/etherdevice.h> 45 #include <linux/if_arp.h> 46 47 #include <net/mac80211.h> 48 49 #include <asm/div64.h> 50 51 #define DRV_NAME "iwl4965" 52 53 #include "common.h" 54 #include "4965.h" 55 56 /****************************************************************************** 57 * 58 * module boiler plate 59 * 60 ******************************************************************************/ 61 62 /* 63 * module name, copyright, version, etc. 64 */ 65 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux" 66 67 #ifdef CONFIG_IWLEGACY_DEBUG 68 #define VD "d" 69 #else 70 #define VD 71 #endif 72 73 #define DRV_VERSION IWLWIFI_VERSION VD 74 75 MODULE_DESCRIPTION(DRV_DESCRIPTION); 76 MODULE_VERSION(DRV_VERSION); 77 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); 78 MODULE_LICENSE("GPL"); 79 MODULE_ALIAS("iwl4965"); 80 81 void 82 il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status) 83 { 84 if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { 85 IL_ERR("Tx flush command to flush out all frames\n"); 86 if (!test_bit(S_EXIT_PENDING, &il->status)) 87 queue_work(il->workqueue, &il->tx_flush); 88 } 89 } 90 91 /* 92 * EEPROM 93 */ 94 struct il_mod_params il4965_mod_params = { 95 .restart_fw = 1, 96 /* the rest are 0 by default */ 97 }; 98 99 void 100 il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq) 101 { 102 unsigned long flags; 103 int i; 104 spin_lock_irqsave(&rxq->lock, flags); 105 INIT_LIST_HEAD(&rxq->rx_free); 106 INIT_LIST_HEAD(&rxq->rx_used); 107 /* Fill the rx_used queue with _all_ of the Rx buffers */ 108 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { 109 /* In the reset function, these buffers may have been allocated 110 * to an SKB, so we need to unmap and free potential storage */ 111 if (rxq->pool[i].page != NULL) { 112 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, 113 PAGE_SIZE << il->hw_params.rx_page_order, 114 PCI_DMA_FROMDEVICE); 115 __il_free_pages(il, rxq->pool[i].page); 116 rxq->pool[i].page = NULL; 117 } 118 list_add_tail(&rxq->pool[i].list, &rxq->rx_used); 119 } 120 121 for (i = 0; i < RX_QUEUE_SIZE; i++) 122 rxq->queue[i] = NULL; 123 124 /* Set us so that we have processed and used all buffers, but have 125 * not restocked the Rx queue with fresh buffers */ 126 rxq->read = rxq->write = 0; 127 rxq->write_actual = 0; 128 rxq->free_count = 0; 129 spin_unlock_irqrestore(&rxq->lock, flags); 130 } 131 132 int 133 il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq) 134 { 135 u32 rb_size; 136 const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ 137 u32 rb_timeout = 0; 138 139 if (il->cfg->mod_params->amsdu_size_8K) 140 rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; 141 else 142 rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; 143 144 /* Stop Rx DMA */ 145 il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); 146 147 /* Reset driver's Rx queue write idx */ 148 il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); 149 150 /* Tell device where to find RBD circular buffer in DRAM */ 151 il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32) (rxq->bd_dma >> 8)); 152 153 /* Tell device where in DRAM to update its Rx status */ 154 il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4); 155 156 /* Enable Rx DMA 157 * Direct rx interrupts to hosts 158 * Rx buffer size 4 or 8k 159 * RB timeout 0x10 160 * 256 RBDs 161 */ 162 il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 163 FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | 164 FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | 165 FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | 166 rb_size | 167 (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) | 168 (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); 169 170 /* Set interrupt coalescing timer to default (2048 usecs) */ 171 il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF); 172 173 return 0; 174 } 175 176 static void 177 il4965_set_pwr_vmain(struct il_priv *il) 178 { 179 /* 180 * (for documentation purposes) 181 * to set power to V_AUX, do: 182 183 if (pci_pme_capable(il->pci_dev, PCI_D3cold)) 184 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, 185 APMG_PS_CTRL_VAL_PWR_SRC_VAUX, 186 ~APMG_PS_CTRL_MSK_PWR_SRC); 187 */ 188 189 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, 190 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, 191 ~APMG_PS_CTRL_MSK_PWR_SRC); 192 } 193 194 int 195 il4965_hw_nic_init(struct il_priv *il) 196 { 197 unsigned long flags; 198 struct il_rx_queue *rxq = &il->rxq; 199 int ret; 200 201 spin_lock_irqsave(&il->lock, flags); 202 il_apm_init(il); 203 /* Set interrupt coalescing calibration timer to default (512 usecs) */ 204 il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF); 205 spin_unlock_irqrestore(&il->lock, flags); 206 207 il4965_set_pwr_vmain(il); 208 il4965_nic_config(il); 209 210 /* Allocate the RX queue, or reset if it is already allocated */ 211 if (!rxq->bd) { 212 ret = il_rx_queue_alloc(il); 213 if (ret) { 214 IL_ERR("Unable to initialize Rx queue\n"); 215 return -ENOMEM; 216 } 217 } else 218 il4965_rx_queue_reset(il, rxq); 219 220 il4965_rx_replenish(il); 221 222 il4965_rx_init(il, rxq); 223 224 spin_lock_irqsave(&il->lock, flags); 225 226 rxq->need_update = 1; 227 il_rx_queue_update_write_ptr(il, rxq); 228 229 spin_unlock_irqrestore(&il->lock, flags); 230 231 /* Allocate or reset and init all Tx and Command queues */ 232 if (!il->txq) { 233 ret = il4965_txq_ctx_alloc(il); 234 if (ret) 235 return ret; 236 } else 237 il4965_txq_ctx_reset(il); 238 239 set_bit(S_INIT, &il->status); 240 241 return 0; 242 } 243 244 /** 245 * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr 246 */ 247 static inline __le32 248 il4965_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr) 249 { 250 return cpu_to_le32((u32) (dma_addr >> 8)); 251 } 252 253 /** 254 * il4965_rx_queue_restock - refill RX queue from pre-allocated pool 255 * 256 * If there are slots in the RX queue that need to be restocked, 257 * and we have free pre-allocated buffers, fill the ranks as much 258 * as we can, pulling from rx_free. 259 * 260 * This moves the 'write' idx forward to catch up with 'processed', and 261 * also updates the memory address in the firmware to reference the new 262 * target buffer. 263 */ 264 void 265 il4965_rx_queue_restock(struct il_priv *il) 266 { 267 struct il_rx_queue *rxq = &il->rxq; 268 struct list_head *element; 269 struct il_rx_buf *rxb; 270 unsigned long flags; 271 272 spin_lock_irqsave(&rxq->lock, flags); 273 while (il_rx_queue_space(rxq) > 0 && rxq->free_count) { 274 /* The overwritten rxb must be a used one */ 275 rxb = rxq->queue[rxq->write]; 276 BUG_ON(rxb && rxb->page); 277 278 /* Get next free Rx buffer, remove from free list */ 279 element = rxq->rx_free.next; 280 rxb = list_entry(element, struct il_rx_buf, list); 281 list_del(element); 282 283 /* Point to Rx buffer via next RBD in circular buffer */ 284 rxq->bd[rxq->write] = 285 il4965_dma_addr2rbd_ptr(il, rxb->page_dma); 286 rxq->queue[rxq->write] = rxb; 287 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; 288 rxq->free_count--; 289 } 290 spin_unlock_irqrestore(&rxq->lock, flags); 291 /* If the pre-allocated buffer pool is dropping low, schedule to 292 * refill it */ 293 if (rxq->free_count <= RX_LOW_WATERMARK) 294 queue_work(il->workqueue, &il->rx_replenish); 295 296 /* If we've added more space for the firmware to place data, tell it. 297 * Increment device's write pointer in multiples of 8. */ 298 if (rxq->write_actual != (rxq->write & ~0x7)) { 299 spin_lock_irqsave(&rxq->lock, flags); 300 rxq->need_update = 1; 301 spin_unlock_irqrestore(&rxq->lock, flags); 302 il_rx_queue_update_write_ptr(il, rxq); 303 } 304 } 305 306 /** 307 * il4965_rx_replenish - Move all used packet from rx_used to rx_free 308 * 309 * When moving to rx_free an SKB is allocated for the slot. 310 * 311 * Also restock the Rx queue via il_rx_queue_restock. 312 * This is called as a scheduled work item (except for during initialization) 313 */ 314 static void 315 il4965_rx_allocate(struct il_priv *il, gfp_t priority) 316 { 317 struct il_rx_queue *rxq = &il->rxq; 318 struct list_head *element; 319 struct il_rx_buf *rxb; 320 struct page *page; 321 dma_addr_t page_dma; 322 unsigned long flags; 323 gfp_t gfp_mask = priority; 324 325 while (1) { 326 spin_lock_irqsave(&rxq->lock, flags); 327 if (list_empty(&rxq->rx_used)) { 328 spin_unlock_irqrestore(&rxq->lock, flags); 329 return; 330 } 331 spin_unlock_irqrestore(&rxq->lock, flags); 332 333 if (rxq->free_count > RX_LOW_WATERMARK) 334 gfp_mask |= __GFP_NOWARN; 335 336 if (il->hw_params.rx_page_order > 0) 337 gfp_mask |= __GFP_COMP; 338 339 /* Alloc a new receive buffer */ 340 page = alloc_pages(gfp_mask, il->hw_params.rx_page_order); 341 if (!page) { 342 if (net_ratelimit()) 343 D_INFO("alloc_pages failed, " "order: %d\n", 344 il->hw_params.rx_page_order); 345 346 if (rxq->free_count <= RX_LOW_WATERMARK && 347 net_ratelimit()) 348 IL_ERR("Failed to alloc_pages with %s. " 349 "Only %u free buffers remaining.\n", 350 priority == 351 GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", 352 rxq->free_count); 353 /* We don't reschedule replenish work here -- we will 354 * call the restock method and if it still needs 355 * more buffers it will schedule replenish */ 356 return; 357 } 358 359 /* Get physical address of the RB */ 360 page_dma = 361 pci_map_page(il->pci_dev, page, 0, 362 PAGE_SIZE << il->hw_params.rx_page_order, 363 PCI_DMA_FROMDEVICE); 364 if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) { 365 __free_pages(page, il->hw_params.rx_page_order); 366 break; 367 } 368 369 spin_lock_irqsave(&rxq->lock, flags); 370 371 if (list_empty(&rxq->rx_used)) { 372 spin_unlock_irqrestore(&rxq->lock, flags); 373 pci_unmap_page(il->pci_dev, page_dma, 374 PAGE_SIZE << il->hw_params.rx_page_order, 375 PCI_DMA_FROMDEVICE); 376 __free_pages(page, il->hw_params.rx_page_order); 377 return; 378 } 379 380 element = rxq->rx_used.next; 381 rxb = list_entry(element, struct il_rx_buf, list); 382 list_del(element); 383 384 BUG_ON(rxb->page); 385 386 rxb->page = page; 387 rxb->page_dma = page_dma; 388 list_add_tail(&rxb->list, &rxq->rx_free); 389 rxq->free_count++; 390 il->alloc_rxb_page++; 391 392 spin_unlock_irqrestore(&rxq->lock, flags); 393 } 394 } 395 396 void 397 il4965_rx_replenish(struct il_priv *il) 398 { 399 unsigned long flags; 400 401 il4965_rx_allocate(il, GFP_KERNEL); 402 403 spin_lock_irqsave(&il->lock, flags); 404 il4965_rx_queue_restock(il); 405 spin_unlock_irqrestore(&il->lock, flags); 406 } 407 408 void 409 il4965_rx_replenish_now(struct il_priv *il) 410 { 411 il4965_rx_allocate(il, GFP_ATOMIC); 412 413 il4965_rx_queue_restock(il); 414 } 415 416 /* Assumes that the skb field of the buffers in 'pool' is kept accurate. 417 * If an SKB has been detached, the POOL needs to have its SKB set to NULL 418 * This free routine walks the list of POOL entries and if SKB is set to 419 * non NULL it is unmapped and freed 420 */ 421 void 422 il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq) 423 { 424 int i; 425 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { 426 if (rxq->pool[i].page != NULL) { 427 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, 428 PAGE_SIZE << il->hw_params.rx_page_order, 429 PCI_DMA_FROMDEVICE); 430 __il_free_pages(il, rxq->pool[i].page); 431 rxq->pool[i].page = NULL; 432 } 433 } 434 435 dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, 436 rxq->bd_dma); 437 dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status), 438 rxq->rb_stts, rxq->rb_stts_dma); 439 rxq->bd = NULL; 440 rxq->rb_stts = NULL; 441 } 442 443 int 444 il4965_rxq_stop(struct il_priv *il) 445 { 446 int ret; 447 448 _il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); 449 ret = _il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG, 450 FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 451 FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 452 1000); 453 if (ret < 0) 454 IL_ERR("Can't stop Rx DMA.\n"); 455 456 return 0; 457 } 458 459 int 460 il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum nl80211_band band) 461 { 462 int idx = 0; 463 int band_offset = 0; 464 465 /* HT rate format: mac80211 wants an MCS number, which is just LSB */ 466 if (rate_n_flags & RATE_MCS_HT_MSK) { 467 idx = (rate_n_flags & 0xff); 468 return idx; 469 /* Legacy rate format, search for match in table */ 470 } else { 471 if (band == NL80211_BAND_5GHZ) 472 band_offset = IL_FIRST_OFDM_RATE; 473 for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++) 474 if (il_rates[idx].plcp == (rate_n_flags & 0xFF)) 475 return idx - band_offset; 476 } 477 478 return -1; 479 } 480 481 static int 482 il4965_calc_rssi(struct il_priv *il, struct il_rx_phy_res *rx_resp) 483 { 484 /* data from PHY/DSP regarding signal strength, etc., 485 * contents are always there, not configurable by host. */ 486 struct il4965_rx_non_cfg_phy *ncphy = 487 (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; 488 u32 agc = 489 (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK) >> 490 IL49_AGC_DB_POS; 491 492 u32 valid_antennae = 493 (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK) 494 >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; 495 u8 max_rssi = 0; 496 u32 i; 497 498 /* Find max rssi among 3 possible receivers. 499 * These values are measured by the digital signal processor (DSP). 500 * They should stay fairly constant even as the signal strength varies, 501 * if the radio's automatic gain control (AGC) is working right. 502 * AGC value (see below) will provide the "interesting" info. */ 503 for (i = 0; i < 3; i++) 504 if (valid_antennae & (1 << i)) 505 max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); 506 507 D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", 508 ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], 509 max_rssi, agc); 510 511 /* dBm = max_rssi dB - agc dB - constant. 512 * Higher AGC (higher radio gain) means lower signal. */ 513 return max_rssi - agc - IL4965_RSSI_OFFSET; 514 } 515 516 static u32 517 il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in) 518 { 519 u32 decrypt_out = 0; 520 521 if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == 522 RX_RES_STATUS_STATION_FOUND) 523 decrypt_out |= 524 (RX_RES_STATUS_STATION_FOUND | 525 RX_RES_STATUS_NO_STATION_INFO_MISMATCH); 526 527 decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); 528 529 /* packet was not encrypted */ 530 if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == 531 RX_RES_STATUS_SEC_TYPE_NONE) 532 return decrypt_out; 533 534 /* packet was encrypted with unknown alg */ 535 if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == 536 RX_RES_STATUS_SEC_TYPE_ERR) 537 return decrypt_out; 538 539 /* decryption was not done in HW */ 540 if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != 541 RX_MPDU_RES_STATUS_DEC_DONE_MSK) 542 return decrypt_out; 543 544 switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { 545 546 case RX_RES_STATUS_SEC_TYPE_CCMP: 547 /* alg is CCM: check MIC only */ 548 if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) 549 /* Bad MIC */ 550 decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; 551 else 552 decrypt_out |= RX_RES_STATUS_DECRYPT_OK; 553 554 break; 555 556 case RX_RES_STATUS_SEC_TYPE_TKIP: 557 if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { 558 /* Bad TTAK */ 559 decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; 560 break; 561 } 562 /* fall through - if TTAK OK */ 563 default: 564 if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) 565 decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; 566 else 567 decrypt_out |= RX_RES_STATUS_DECRYPT_OK; 568 break; 569 } 570 571 D_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", decrypt_in, decrypt_out); 572 573 return decrypt_out; 574 } 575 576 #define SMALL_PACKET_SIZE 256 577 578 static void 579 il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr, 580 u32 len, u32 ampdu_status, struct il_rx_buf *rxb, 581 struct ieee80211_rx_status *stats) 582 { 583 struct sk_buff *skb; 584 __le16 fc = hdr->frame_control; 585 586 /* We only process data packets if the interface is open */ 587 if (unlikely(!il->is_open)) { 588 D_DROP("Dropping packet while interface is not open.\n"); 589 return; 590 } 591 592 if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { 593 il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); 594 D_INFO("Woke queues - frame received on passive channel\n"); 595 } 596 597 /* In case of HW accelerated crypto and bad decryption, drop */ 598 if (!il->cfg->mod_params->sw_crypto && 599 il_set_decrypted_flag(il, hdr, ampdu_status, stats)) 600 return; 601 602 skb = dev_alloc_skb(SMALL_PACKET_SIZE); 603 if (!skb) { 604 IL_ERR("dev_alloc_skb failed\n"); 605 return; 606 } 607 608 if (len <= SMALL_PACKET_SIZE) { 609 skb_put_data(skb, hdr, len); 610 } else { 611 skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), 612 len, PAGE_SIZE << il->hw_params.rx_page_order); 613 il->alloc_rxb_page--; 614 rxb->page = NULL; 615 } 616 617 il_update_stats(il, false, fc, len); 618 memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); 619 620 ieee80211_rx(il->hw, skb); 621 } 622 623 /* Called for N_RX (legacy ABG frames), or 624 * N_RX_MPDU (HT high-throughput N frames). */ 625 static void 626 il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) 627 { 628 struct ieee80211_hdr *header; 629 struct ieee80211_rx_status rx_status = {}; 630 struct il_rx_pkt *pkt = rxb_addr(rxb); 631 struct il_rx_phy_res *phy_res; 632 __le32 rx_pkt_status; 633 struct il_rx_mpdu_res_start *amsdu; 634 u32 len; 635 u32 ampdu_status; 636 u32 rate_n_flags; 637 638 /** 639 * N_RX and N_RX_MPDU are handled differently. 640 * N_RX: physical layer info is in this buffer 641 * N_RX_MPDU: physical layer info was sent in separate 642 * command and cached in il->last_phy_res 643 * 644 * Here we set up local variables depending on which command is 645 * received. 646 */ 647 if (pkt->hdr.cmd == N_RX) { 648 phy_res = (struct il_rx_phy_res *)pkt->u.raw; 649 header = 650 (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) + 651 phy_res->cfg_phy_cnt); 652 653 len = le16_to_cpu(phy_res->byte_count); 654 rx_pkt_status = 655 *(__le32 *) (pkt->u.raw + sizeof(*phy_res) + 656 phy_res->cfg_phy_cnt + len); 657 ampdu_status = le32_to_cpu(rx_pkt_status); 658 } else { 659 if (!il->_4965.last_phy_res_valid) { 660 IL_ERR("MPDU frame without cached PHY data\n"); 661 return; 662 } 663 phy_res = &il->_4965.last_phy_res; 664 amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw; 665 header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu)); 666 len = le16_to_cpu(amsdu->byte_count); 667 rx_pkt_status = *(__le32 *) (pkt->u.raw + sizeof(*amsdu) + len); 668 ampdu_status = 669 il4965_translate_rx_status(il, le32_to_cpu(rx_pkt_status)); 670 } 671 672 if ((unlikely(phy_res->cfg_phy_cnt > 20))) { 673 D_DROP("dsp size out of range [0,20]: %d\n", 674 phy_res->cfg_phy_cnt); 675 return; 676 } 677 678 if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || 679 !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { 680 D_RX("Bad CRC or FIFO: 0x%08X.\n", le32_to_cpu(rx_pkt_status)); 681 return; 682 } 683 684 /* This will be used in several places later */ 685 rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); 686 687 /* rx_status carries information about the packet to mac80211 */ 688 rx_status.mactime = le64_to_cpu(phy_res->timestamp); 689 rx_status.band = 690 (phy_res-> 691 phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? NL80211_BAND_2GHZ : 692 NL80211_BAND_5GHZ; 693 rx_status.freq = 694 ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), 695 rx_status.band); 696 rx_status.rate_idx = 697 il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); 698 rx_status.flag = 0; 699 700 /* TSF isn't reliable. In order to allow smooth user experience, 701 * this W/A doesn't propagate it to the mac80211 */ 702 /*rx_status.flag |= RX_FLAG_MACTIME_START; */ 703 704 il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); 705 706 /* Find max signal strength (dBm) among 3 antenna/receiver chains */ 707 rx_status.signal = il4965_calc_rssi(il, phy_res); 708 709 D_STATS("Rssi %d, TSF %llu\n", rx_status.signal, 710 (unsigned long long)rx_status.mactime); 711 712 /* 713 * "antenna number" 714 * 715 * It seems that the antenna field in the phy flags value 716 * is actually a bit field. This is undefined by radiotap, 717 * it wants an actual antenna number but I always get "7" 718 * for most legacy frames I receive indicating that the 719 * same frame was received on all three RX chains. 720 * 721 * I think this field should be removed in favor of a 722 * new 802.11n radiotap field "RX chains" that is defined 723 * as a bitmask. 724 */ 725 rx_status.antenna = 726 (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 727 RX_RES_PHY_FLAGS_ANTENNA_POS; 728 729 /* set the preamble flag if appropriate */ 730 if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) 731 rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE; 732 733 /* Set up the HT phy flags */ 734 if (rate_n_flags & RATE_MCS_HT_MSK) 735 rx_status.encoding = RX_ENC_HT; 736 if (rate_n_flags & RATE_MCS_HT40_MSK) 737 rx_status.bw = RATE_INFO_BW_40; 738 else 739 rx_status.bw = RATE_INFO_BW_20; 740 if (rate_n_flags & RATE_MCS_SGI_MSK) 741 rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI; 742 743 if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) { 744 /* We know which subframes of an A-MPDU belong 745 * together since we get a single PHY response 746 * from the firmware for all of them. 747 */ 748 749 rx_status.flag |= RX_FLAG_AMPDU_DETAILS; 750 rx_status.ampdu_reference = il->_4965.ampdu_ref; 751 } 752 753 il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb, 754 &rx_status); 755 } 756 757 /* Cache phy data (Rx signal strength, etc) for HT frame (N_RX_PHY). 758 * This will be used later in il_hdl_rx() for N_RX_MPDU. */ 759 static void 760 il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb) 761 { 762 struct il_rx_pkt *pkt = rxb_addr(rxb); 763 il->_4965.last_phy_res_valid = true; 764 il->_4965.ampdu_ref++; 765 memcpy(&il->_4965.last_phy_res, pkt->u.raw, 766 sizeof(struct il_rx_phy_res)); 767 } 768 769 static int 770 il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif, 771 enum nl80211_band band, u8 is_active, 772 u8 n_probes, struct il_scan_channel *scan_ch) 773 { 774 struct ieee80211_channel *chan; 775 const struct ieee80211_supported_band *sband; 776 const struct il_channel_info *ch_info; 777 u16 passive_dwell = 0; 778 u16 active_dwell = 0; 779 int added, i; 780 u16 channel; 781 782 sband = il_get_hw_mode(il, band); 783 if (!sband) 784 return 0; 785 786 active_dwell = il_get_active_dwell_time(il, band, n_probes); 787 passive_dwell = il_get_passive_dwell_time(il, band, vif); 788 789 if (passive_dwell <= active_dwell) 790 passive_dwell = active_dwell + 1; 791 792 for (i = 0, added = 0; i < il->scan_request->n_channels; i++) { 793 chan = il->scan_request->channels[i]; 794 795 if (chan->band != band) 796 continue; 797 798 channel = chan->hw_value; 799 scan_ch->channel = cpu_to_le16(channel); 800 801 ch_info = il_get_channel_info(il, band, channel); 802 if (!il_is_channel_valid(ch_info)) { 803 D_SCAN("Channel %d is INVALID for this band.\n", 804 channel); 805 continue; 806 } 807 808 if (!is_active || il_is_channel_passive(ch_info) || 809 (chan->flags & IEEE80211_CHAN_NO_IR)) 810 scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; 811 else 812 scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; 813 814 if (n_probes) 815 scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes); 816 817 scan_ch->active_dwell = cpu_to_le16(active_dwell); 818 scan_ch->passive_dwell = cpu_to_le16(passive_dwell); 819 820 /* Set txpower levels to defaults */ 821 scan_ch->dsp_atten = 110; 822 823 /* NOTE: if we were doing 6Mb OFDM for scans we'd use 824 * power level: 825 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; 826 */ 827 if (band == NL80211_BAND_5GHZ) 828 scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; 829 else 830 scan_ch->tx_gain = ((1 << 5) | (5 << 3)); 831 832 D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", channel, 833 le32_to_cpu(scan_ch->type), 834 (scan_ch-> 835 type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE", 836 (scan_ch-> 837 type & SCAN_CHANNEL_TYPE_ACTIVE) ? active_dwell : 838 passive_dwell); 839 840 scan_ch++; 841 added++; 842 } 843 844 D_SCAN("total channels to scan %d\n", added); 845 return added; 846 } 847 848 static void 849 il4965_toggle_tx_ant(struct il_priv *il, u8 *ant, u8 valid) 850 { 851 int i; 852 u8 ind = *ant; 853 854 for (i = 0; i < RATE_ANT_NUM - 1; i++) { 855 ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; 856 if (valid & BIT(ind)) { 857 *ant = ind; 858 return; 859 } 860 } 861 } 862 863 int 864 il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif) 865 { 866 struct il_host_cmd cmd = { 867 .id = C_SCAN, 868 .len = sizeof(struct il_scan_cmd), 869 .flags = CMD_SIZE_HUGE, 870 }; 871 struct il_scan_cmd *scan; 872 u32 rate_flags = 0; 873 u16 cmd_len; 874 u16 rx_chain = 0; 875 enum nl80211_band band; 876 u8 n_probes = 0; 877 u8 rx_ant = il->hw_params.valid_rx_ant; 878 u8 rate; 879 bool is_active = false; 880 int chan_mod; 881 u8 active_chains; 882 u8 scan_tx_antennas = il->hw_params.valid_tx_ant; 883 int ret; 884 885 lockdep_assert_held(&il->mutex); 886 887 if (!il->scan_cmd) { 888 il->scan_cmd = 889 kmalloc(sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE, 890 GFP_KERNEL); 891 if (!il->scan_cmd) { 892 D_SCAN("fail to allocate memory for scan\n"); 893 return -ENOMEM; 894 } 895 } 896 scan = il->scan_cmd; 897 memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE); 898 899 scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH; 900 scan->quiet_time = IL_ACTIVE_QUIET_TIME; 901 902 if (il_is_any_associated(il)) { 903 u16 interval; 904 u32 extra; 905 u32 suspend_time = 100; 906 u32 scan_suspend_time = 100; 907 908 D_INFO("Scanning while associated...\n"); 909 interval = vif->bss_conf.beacon_int; 910 911 scan->suspend_time = 0; 912 scan->max_out_time = cpu_to_le32(200 * 1024); 913 if (!interval) 914 interval = suspend_time; 915 916 extra = (suspend_time / interval) << 22; 917 scan_suspend_time = 918 (extra | ((suspend_time % interval) * 1024)); 919 scan->suspend_time = cpu_to_le32(scan_suspend_time); 920 D_SCAN("suspend_time 0x%X beacon interval %d\n", 921 scan_suspend_time, interval); 922 } 923 924 if (il->scan_request->n_ssids) { 925 int i, p = 0; 926 D_SCAN("Kicking off active scan\n"); 927 for (i = 0; i < il->scan_request->n_ssids; i++) { 928 /* always does wildcard anyway */ 929 if (!il->scan_request->ssids[i].ssid_len) 930 continue; 931 scan->direct_scan[p].id = WLAN_EID_SSID; 932 scan->direct_scan[p].len = 933 il->scan_request->ssids[i].ssid_len; 934 memcpy(scan->direct_scan[p].ssid, 935 il->scan_request->ssids[i].ssid, 936 il->scan_request->ssids[i].ssid_len); 937 n_probes++; 938 p++; 939 } 940 is_active = true; 941 } else 942 D_SCAN("Start passive scan.\n"); 943 944 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; 945 scan->tx_cmd.sta_id = il->hw_params.bcast_id; 946 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 947 948 switch (il->scan_band) { 949 case NL80211_BAND_2GHZ: 950 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; 951 chan_mod = 952 le32_to_cpu(il->active.flags & RXON_FLG_CHANNEL_MODE_MSK) >> 953 RXON_FLG_CHANNEL_MODE_POS; 954 if (chan_mod == CHANNEL_MODE_PURE_40) { 955 rate = RATE_6M_PLCP; 956 } else { 957 rate = RATE_1M_PLCP; 958 rate_flags = RATE_MCS_CCK_MSK; 959 } 960 break; 961 case NL80211_BAND_5GHZ: 962 rate = RATE_6M_PLCP; 963 break; 964 default: 965 IL_WARN("Invalid scan band\n"); 966 return -EIO; 967 } 968 969 /* 970 * If active scanning is requested but a certain channel is 971 * marked passive, we can do active scanning if we detect 972 * transmissions. 973 * 974 * There is an issue with some firmware versions that triggers 975 * a sysassert on a "good CRC threshold" of zero (== disabled), 976 * on a radar channel even though this means that we should NOT 977 * send probes. 978 * 979 * The "good CRC threshold" is the number of frames that we 980 * need to receive during our dwell time on a channel before 981 * sending out probes -- setting this to a huge value will 982 * mean we never reach it, but at the same time work around 983 * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER 984 * here instead of IL_GOOD_CRC_TH_DISABLED. 985 */ 986 scan->good_CRC_th = 987 is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER; 988 989 band = il->scan_band; 990 991 if (il->cfg->scan_rx_antennas[band]) 992 rx_ant = il->cfg->scan_rx_antennas[band]; 993 994 il4965_toggle_tx_ant(il, &il->scan_tx_ant[band], scan_tx_antennas); 995 rate_flags |= BIT(il->scan_tx_ant[band]) << RATE_MCS_ANT_POS; 996 scan->tx_cmd.rate_n_flags = cpu_to_le32(rate | rate_flags); 997 998 /* In power save mode use one chain, otherwise use all chains */ 999 if (test_bit(S_POWER_PMI, &il->status)) { 1000 /* rx_ant has been set to all valid chains previously */ 1001 active_chains = 1002 rx_ant & ((u8) (il->chain_noise_data.active_chains)); 1003 if (!active_chains) 1004 active_chains = rx_ant; 1005 1006 D_SCAN("chain_noise_data.active_chains: %u\n", 1007 il->chain_noise_data.active_chains); 1008 1009 rx_ant = il4965_first_antenna(active_chains); 1010 } 1011 1012 /* MIMO is not used here, but value is required */ 1013 rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; 1014 rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; 1015 rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; 1016 rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; 1017 scan->rx_chain = cpu_to_le16(rx_chain); 1018 1019 cmd_len = 1020 il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data, 1021 vif->addr, il->scan_request->ie, 1022 il->scan_request->ie_len, 1023 IL_MAX_SCAN_SIZE - sizeof(*scan)); 1024 scan->tx_cmd.len = cpu_to_le16(cmd_len); 1025 1026 scan->filter_flags |= 1027 (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK); 1028 1029 scan->channel_count = 1030 il4965_get_channels_for_scan(il, vif, band, is_active, n_probes, 1031 (void *)&scan->data[cmd_len]); 1032 if (scan->channel_count == 0) { 1033 D_SCAN("channel count %d\n", scan->channel_count); 1034 return -EIO; 1035 } 1036 1037 cmd.len += 1038 le16_to_cpu(scan->tx_cmd.len) + 1039 scan->channel_count * sizeof(struct il_scan_channel); 1040 cmd.data = scan; 1041 scan->len = cpu_to_le16(cmd.len); 1042 1043 set_bit(S_SCAN_HW, &il->status); 1044 1045 ret = il_send_cmd_sync(il, &cmd); 1046 if (ret) 1047 clear_bit(S_SCAN_HW, &il->status); 1048 1049 return ret; 1050 } 1051 1052 int 1053 il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, 1054 bool add) 1055 { 1056 struct il_vif_priv *vif_priv = (void *)vif->drv_priv; 1057 1058 if (add) 1059 return il4965_add_bssid_station(il, vif->bss_conf.bssid, 1060 &vif_priv->ibss_bssid_sta_id); 1061 return il_remove_station(il, vif_priv->ibss_bssid_sta_id, 1062 vif->bss_conf.bssid); 1063 } 1064 1065 void 1066 il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, int freed) 1067 { 1068 lockdep_assert_held(&il->sta_lock); 1069 1070 if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed) 1071 il->stations[sta_id].tid[tid].tfds_in_queue -= freed; 1072 else { 1073 D_TX("free more than tfds_in_queue (%u:%d)\n", 1074 il->stations[sta_id].tid[tid].tfds_in_queue, freed); 1075 il->stations[sta_id].tid[tid].tfds_in_queue = 0; 1076 } 1077 } 1078 1079 #define IL_TX_QUEUE_MSK 0xfffff 1080 1081 static bool 1082 il4965_is_single_rx_stream(struct il_priv *il) 1083 { 1084 return il->current_ht_config.smps == IEEE80211_SMPS_STATIC || 1085 il->current_ht_config.single_chain_sufficient; 1086 } 1087 1088 #define IL_NUM_RX_CHAINS_MULTIPLE 3 1089 #define IL_NUM_RX_CHAINS_SINGLE 2 1090 #define IL_NUM_IDLE_CHAINS_DUAL 2 1091 #define IL_NUM_IDLE_CHAINS_SINGLE 1 1092 1093 /* 1094 * Determine how many receiver/antenna chains to use. 1095 * 1096 * More provides better reception via diversity. Fewer saves power 1097 * at the expense of throughput, but only when not in powersave to 1098 * start with. 1099 * 1100 * MIMO (dual stream) requires at least 2, but works better with 3. 1101 * This does not determine *which* chains to use, just how many. 1102 */ 1103 static int 1104 il4965_get_active_rx_chain_count(struct il_priv *il) 1105 { 1106 /* # of Rx chains to use when expecting MIMO. */ 1107 if (il4965_is_single_rx_stream(il)) 1108 return IL_NUM_RX_CHAINS_SINGLE; 1109 else 1110 return IL_NUM_RX_CHAINS_MULTIPLE; 1111 } 1112 1113 /* 1114 * When we are in power saving mode, unless device support spatial 1115 * multiplexing power save, use the active count for rx chain count. 1116 */ 1117 static int 1118 il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt) 1119 { 1120 /* # Rx chains when idling, depending on SMPS mode */ 1121 switch (il->current_ht_config.smps) { 1122 case IEEE80211_SMPS_STATIC: 1123 case IEEE80211_SMPS_DYNAMIC: 1124 return IL_NUM_IDLE_CHAINS_SINGLE; 1125 case IEEE80211_SMPS_OFF: 1126 return active_cnt; 1127 default: 1128 WARN(1, "invalid SMPS mode %d", il->current_ht_config.smps); 1129 return active_cnt; 1130 } 1131 } 1132 1133 /* up to 4 chains */ 1134 static u8 1135 il4965_count_chain_bitmap(u32 chain_bitmap) 1136 { 1137 u8 res; 1138 res = (chain_bitmap & BIT(0)) >> 0; 1139 res += (chain_bitmap & BIT(1)) >> 1; 1140 res += (chain_bitmap & BIT(2)) >> 2; 1141 res += (chain_bitmap & BIT(3)) >> 3; 1142 return res; 1143 } 1144 1145 /** 1146 * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image 1147 * 1148 * Selects how many and which Rx receivers/antennas/chains to use. 1149 * This should not be used for scan command ... it puts data in wrong place. 1150 */ 1151 void 1152 il4965_set_rxon_chain(struct il_priv *il) 1153 { 1154 bool is_single = il4965_is_single_rx_stream(il); 1155 bool is_cam = !test_bit(S_POWER_PMI, &il->status); 1156 u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; 1157 u32 active_chains; 1158 u16 rx_chain; 1159 1160 /* Tell uCode which antennas are actually connected. 1161 * Before first association, we assume all antennas are connected. 1162 * Just after first association, il4965_chain_noise_calibration() 1163 * checks which antennas actually *are* connected. */ 1164 if (il->chain_noise_data.active_chains) 1165 active_chains = il->chain_noise_data.active_chains; 1166 else 1167 active_chains = il->hw_params.valid_rx_ant; 1168 1169 rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; 1170 1171 /* How many receivers should we use? */ 1172 active_rx_cnt = il4965_get_active_rx_chain_count(il); 1173 idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt); 1174 1175 /* correct rx chain count according hw settings 1176 * and chain noise calibration 1177 */ 1178 valid_rx_cnt = il4965_count_chain_bitmap(active_chains); 1179 if (valid_rx_cnt < active_rx_cnt) 1180 active_rx_cnt = valid_rx_cnt; 1181 1182 if (valid_rx_cnt < idle_rx_cnt) 1183 idle_rx_cnt = valid_rx_cnt; 1184 1185 rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; 1186 rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; 1187 1188 il->staging.rx_chain = cpu_to_le16(rx_chain); 1189 1190 if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam) 1191 il->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; 1192 else 1193 il->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; 1194 1195 D_ASSOC("rx_chain=0x%X active=%d idle=%d\n", il->staging.rx_chain, 1196 active_rx_cnt, idle_rx_cnt); 1197 1198 WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || 1199 active_rx_cnt < idle_rx_cnt); 1200 } 1201 1202 static const char * 1203 il4965_get_fh_string(int cmd) 1204 { 1205 switch (cmd) { 1206 IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG); 1207 IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG); 1208 IL_CMD(FH49_RSCSR_CHNL0_WPTR); 1209 IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG); 1210 IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG); 1211 IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG); 1212 IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); 1213 IL_CMD(FH49_TSSR_TX_STATUS_REG); 1214 IL_CMD(FH49_TSSR_TX_ERROR_REG); 1215 default: 1216 return "UNKNOWN"; 1217 } 1218 } 1219 1220 int 1221 il4965_dump_fh(struct il_priv *il, char **buf, bool display) 1222 { 1223 int i; 1224 #ifdef CONFIG_IWLEGACY_DEBUG 1225 int pos = 0; 1226 size_t bufsz = 0; 1227 #endif 1228 static const u32 fh_tbl[] = { 1229 FH49_RSCSR_CHNL0_STTS_WPTR_REG, 1230 FH49_RSCSR_CHNL0_RBDCB_BASE_REG, 1231 FH49_RSCSR_CHNL0_WPTR, 1232 FH49_MEM_RCSR_CHNL0_CONFIG_REG, 1233 FH49_MEM_RSSR_SHARED_CTRL_REG, 1234 FH49_MEM_RSSR_RX_STATUS_REG, 1235 FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, 1236 FH49_TSSR_TX_STATUS_REG, 1237 FH49_TSSR_TX_ERROR_REG 1238 }; 1239 #ifdef CONFIG_IWLEGACY_DEBUG 1240 if (display) { 1241 bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; 1242 *buf = kmalloc(bufsz, GFP_KERNEL); 1243 if (!*buf) 1244 return -ENOMEM; 1245 pos += 1246 scnprintf(*buf + pos, bufsz - pos, "FH register values:\n"); 1247 for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { 1248 pos += 1249 scnprintf(*buf + pos, bufsz - pos, 1250 " %34s: 0X%08x\n", 1251 il4965_get_fh_string(fh_tbl[i]), 1252 il_rd(il, fh_tbl[i])); 1253 } 1254 return pos; 1255 } 1256 #endif 1257 IL_ERR("FH register values:\n"); 1258 for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { 1259 IL_ERR(" %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]), 1260 il_rd(il, fh_tbl[i])); 1261 } 1262 return 0; 1263 } 1264 1265 static void 1266 il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb) 1267 { 1268 struct il_rx_pkt *pkt = rxb_addr(rxb); 1269 struct il_missed_beacon_notif *missed_beacon; 1270 1271 missed_beacon = &pkt->u.missed_beacon; 1272 if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) > 1273 il->missed_beacon_threshold) { 1274 D_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n", 1275 le32_to_cpu(missed_beacon->consecutive_missed_beacons), 1276 le32_to_cpu(missed_beacon->total_missed_becons), 1277 le32_to_cpu(missed_beacon->num_recvd_beacons), 1278 le32_to_cpu(missed_beacon->num_expected_beacons)); 1279 if (!test_bit(S_SCANNING, &il->status)) 1280 il4965_init_sensitivity(il); 1281 } 1282 } 1283 1284 /* Calculate noise level, based on measurements during network silence just 1285 * before arriving beacon. This measurement can be done only if we know 1286 * exactly when to expect beacons, therefore only when we're associated. */ 1287 static void 1288 il4965_rx_calc_noise(struct il_priv *il) 1289 { 1290 struct stats_rx_non_phy *rx_info; 1291 int num_active_rx = 0; 1292 int total_silence = 0; 1293 int bcn_silence_a, bcn_silence_b, bcn_silence_c; 1294 int last_rx_noise; 1295 1296 rx_info = &(il->_4965.stats.rx.general); 1297 bcn_silence_a = 1298 le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; 1299 bcn_silence_b = 1300 le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; 1301 bcn_silence_c = 1302 le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; 1303 1304 if (bcn_silence_a) { 1305 total_silence += bcn_silence_a; 1306 num_active_rx++; 1307 } 1308 if (bcn_silence_b) { 1309 total_silence += bcn_silence_b; 1310 num_active_rx++; 1311 } 1312 if (bcn_silence_c) { 1313 total_silence += bcn_silence_c; 1314 num_active_rx++; 1315 } 1316 1317 /* Average among active antennas */ 1318 if (num_active_rx) 1319 last_rx_noise = (total_silence / num_active_rx) - 107; 1320 else 1321 last_rx_noise = IL_NOISE_MEAS_NOT_AVAILABLE; 1322 1323 D_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", bcn_silence_a, 1324 bcn_silence_b, bcn_silence_c, last_rx_noise); 1325 } 1326 1327 #ifdef CONFIG_IWLEGACY_DEBUGFS 1328 /* 1329 * based on the assumption of all stats counter are in DWORD 1330 * FIXME: This function is for debugging, do not deal with 1331 * the case of counters roll-over. 1332 */ 1333 static void 1334 il4965_accumulative_stats(struct il_priv *il, __le32 * stats) 1335 { 1336 int i, size; 1337 __le32 *prev_stats; 1338 u32 *accum_stats; 1339 u32 *delta, *max_delta; 1340 struct stats_general_common *general, *accum_general; 1341 1342 prev_stats = (__le32 *) &il->_4965.stats; 1343 accum_stats = (u32 *) &il->_4965.accum_stats; 1344 size = sizeof(struct il_notif_stats); 1345 general = &il->_4965.stats.general.common; 1346 accum_general = &il->_4965.accum_stats.general.common; 1347 delta = (u32 *) &il->_4965.delta_stats; 1348 max_delta = (u32 *) &il->_4965.max_delta; 1349 1350 for (i = sizeof(__le32); i < size; 1351 i += 1352 sizeof(__le32), stats++, prev_stats++, delta++, max_delta++, 1353 accum_stats++) { 1354 if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { 1355 *delta = 1356 (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats)); 1357 *accum_stats += *delta; 1358 if (*delta > *max_delta) 1359 *max_delta = *delta; 1360 } 1361 } 1362 1363 /* reset accumulative stats for "no-counter" type stats */ 1364 accum_general->temperature = general->temperature; 1365 accum_general->ttl_timestamp = general->ttl_timestamp; 1366 } 1367 #endif 1368 1369 static void 1370 il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb) 1371 { 1372 const int recalib_seconds = 60; 1373 bool change; 1374 struct il_rx_pkt *pkt = rxb_addr(rxb); 1375 1376 D_RX("Statistics notification received (%d vs %d).\n", 1377 (int)sizeof(struct il_notif_stats), 1378 le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK); 1379 1380 change = 1381 ((il->_4965.stats.general.common.temperature != 1382 pkt->u.stats.general.common.temperature) || 1383 ((il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK) != 1384 (pkt->u.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK))); 1385 #ifdef CONFIG_IWLEGACY_DEBUGFS 1386 il4965_accumulative_stats(il, (__le32 *) &pkt->u.stats); 1387 #endif 1388 1389 /* TODO: reading some of stats is unneeded */ 1390 memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats)); 1391 1392 set_bit(S_STATS, &il->status); 1393 1394 /* 1395 * Reschedule the stats timer to occur in recalib_seconds to ensure 1396 * we get a thermal update even if the uCode doesn't give us one 1397 */ 1398 mod_timer(&il->stats_periodic, 1399 jiffies + msecs_to_jiffies(recalib_seconds * 1000)); 1400 1401 if (unlikely(!test_bit(S_SCANNING, &il->status)) && 1402 (pkt->hdr.cmd == N_STATS)) { 1403 il4965_rx_calc_noise(il); 1404 queue_work(il->workqueue, &il->run_time_calib_work); 1405 } 1406 1407 if (change) 1408 il4965_temperature_calib(il); 1409 } 1410 1411 static void 1412 il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb) 1413 { 1414 struct il_rx_pkt *pkt = rxb_addr(rxb); 1415 1416 if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATS_CLEAR_MSK) { 1417 #ifdef CONFIG_IWLEGACY_DEBUGFS 1418 memset(&il->_4965.accum_stats, 0, 1419 sizeof(struct il_notif_stats)); 1420 memset(&il->_4965.delta_stats, 0, 1421 sizeof(struct il_notif_stats)); 1422 memset(&il->_4965.max_delta, 0, sizeof(struct il_notif_stats)); 1423 #endif 1424 D_RX("Statistics have been cleared\n"); 1425 } 1426 il4965_hdl_stats(il, rxb); 1427 } 1428 1429 1430 /* 1431 * mac80211 queues, ACs, hardware queues, FIFOs. 1432 * 1433 * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues 1434 * 1435 * Mac80211 uses the following numbers, which we get as from it 1436 * by way of skb_get_queue_mapping(skb): 1437 * 1438 * VO 0 1439 * VI 1 1440 * BE 2 1441 * BK 3 1442 * 1443 * 1444 * Regular (not A-MPDU) frames are put into hardware queues corresponding 1445 * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their 1446 * own queue per aggregation session (RA/TID combination), such queues are 1447 * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In 1448 * order to map frames to the right queue, we also need an AC->hw queue 1449 * mapping. This is implemented here. 1450 * 1451 * Due to the way hw queues are set up (by the hw specific modules like 1452 * 4965.c), the AC->hw queue mapping is the identity 1453 * mapping. 1454 */ 1455 1456 static const u8 tid_to_ac[] = { 1457 IEEE80211_AC_BE, 1458 IEEE80211_AC_BK, 1459 IEEE80211_AC_BK, 1460 IEEE80211_AC_BE, 1461 IEEE80211_AC_VI, 1462 IEEE80211_AC_VI, 1463 IEEE80211_AC_VO, 1464 IEEE80211_AC_VO 1465 }; 1466 1467 static inline int 1468 il4965_get_ac_from_tid(u16 tid) 1469 { 1470 if (likely(tid < ARRAY_SIZE(tid_to_ac))) 1471 return tid_to_ac[tid]; 1472 1473 /* no support for TIDs 8-15 yet */ 1474 return -EINVAL; 1475 } 1476 1477 static inline int 1478 il4965_get_fifo_from_tid(u16 tid) 1479 { 1480 static const u8 ac_to_fifo[] = { 1481 IL_TX_FIFO_VO, 1482 IL_TX_FIFO_VI, 1483 IL_TX_FIFO_BE, 1484 IL_TX_FIFO_BK, 1485 }; 1486 1487 if (likely(tid < ARRAY_SIZE(tid_to_ac))) 1488 return ac_to_fifo[tid_to_ac[tid]]; 1489 1490 /* no support for TIDs 8-15 yet */ 1491 return -EINVAL; 1492 } 1493 1494 /* 1495 * handle build C_TX command notification. 1496 */ 1497 static void 1498 il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb, 1499 struct il_tx_cmd *tx_cmd, 1500 struct ieee80211_tx_info *info, 1501 struct ieee80211_hdr *hdr, u8 std_id) 1502 { 1503 __le16 fc = hdr->frame_control; 1504 __le32 tx_flags = tx_cmd->tx_flags; 1505 1506 tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 1507 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { 1508 tx_flags |= TX_CMD_FLG_ACK_MSK; 1509 if (ieee80211_is_mgmt(fc)) 1510 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 1511 if (ieee80211_is_probe_resp(fc) && 1512 !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) 1513 tx_flags |= TX_CMD_FLG_TSF_MSK; 1514 } else { 1515 tx_flags &= (~TX_CMD_FLG_ACK_MSK); 1516 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 1517 } 1518 1519 if (ieee80211_is_back_req(fc)) 1520 tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; 1521 1522 tx_cmd->sta_id = std_id; 1523 if (ieee80211_has_morefrags(fc)) 1524 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; 1525 1526 if (ieee80211_is_data_qos(fc)) { 1527 u8 *qc = ieee80211_get_qos_ctl(hdr); 1528 tx_cmd->tid_tspec = qc[0] & 0xf; 1529 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; 1530 } else { 1531 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 1532 } 1533 1534 il_tx_cmd_protection(il, info, fc, &tx_flags); 1535 1536 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); 1537 if (ieee80211_is_mgmt(fc)) { 1538 if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) 1539 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); 1540 else 1541 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); 1542 } else { 1543 tx_cmd->timeout.pm_frame_timeout = 0; 1544 } 1545 1546 tx_cmd->driver_txop = 0; 1547 tx_cmd->tx_flags = tx_flags; 1548 tx_cmd->next_frame_len = 0; 1549 } 1550 1551 static void 1552 il4965_tx_cmd_build_rate(struct il_priv *il, 1553 struct il_tx_cmd *tx_cmd, 1554 struct ieee80211_tx_info *info, 1555 struct ieee80211_sta *sta, 1556 __le16 fc) 1557 { 1558 const u8 rts_retry_limit = 60; 1559 u32 rate_flags; 1560 int rate_idx; 1561 u8 data_retry_limit; 1562 u8 rate_plcp; 1563 1564 /* Set retry limit on DATA packets and Probe Responses */ 1565 if (ieee80211_is_probe_resp(fc)) 1566 data_retry_limit = 3; 1567 else 1568 data_retry_limit = IL4965_DEFAULT_TX_RETRY; 1569 tx_cmd->data_retry_limit = data_retry_limit; 1570 /* Set retry limit on RTS packets */ 1571 tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit); 1572 1573 /* DATA packets will use the uCode station table for rate/antenna 1574 * selection */ 1575 if (ieee80211_is_data(fc)) { 1576 tx_cmd->initial_rate_idx = 0; 1577 tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; 1578 return; 1579 } 1580 1581 /** 1582 * If the current TX rate stored in mac80211 has the MCS bit set, it's 1583 * not really a TX rate. Thus, we use the lowest supported rate for 1584 * this band. Also use the lowest supported rate if the stored rate 1585 * idx is invalid. 1586 */ 1587 rate_idx = info->control.rates[0].idx; 1588 if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0 1589 || rate_idx > RATE_COUNT_LEGACY) 1590 rate_idx = rate_lowest_index(&il->bands[info->band], sta); 1591 /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ 1592 if (info->band == NL80211_BAND_5GHZ) 1593 rate_idx += IL_FIRST_OFDM_RATE; 1594 /* Get PLCP rate for tx_cmd->rate_n_flags */ 1595 rate_plcp = il_rates[rate_idx].plcp; 1596 /* Zero out flags for this packet */ 1597 rate_flags = 0; 1598 1599 /* Set CCK flag as needed */ 1600 if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE) 1601 rate_flags |= RATE_MCS_CCK_MSK; 1602 1603 /* Set up antennas */ 1604 il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); 1605 rate_flags |= BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; 1606 1607 /* Set the rate in the TX cmd */ 1608 tx_cmd->rate_n_flags = cpu_to_le32(rate_plcp | rate_flags); 1609 } 1610 1611 static void 1612 il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info, 1613 struct il_tx_cmd *tx_cmd, struct sk_buff *skb_frag, 1614 int sta_id) 1615 { 1616 struct ieee80211_key_conf *keyconf = info->control.hw_key; 1617 1618 switch (keyconf->cipher) { 1619 case WLAN_CIPHER_SUITE_CCMP: 1620 tx_cmd->sec_ctl = TX_CMD_SEC_CCM; 1621 memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); 1622 if (info->flags & IEEE80211_TX_CTL_AMPDU) 1623 tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; 1624 D_TX("tx_cmd with AES hwcrypto\n"); 1625 break; 1626 1627 case WLAN_CIPHER_SUITE_TKIP: 1628 tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; 1629 ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); 1630 D_TX("tx_cmd with tkip hwcrypto\n"); 1631 break; 1632 1633 case WLAN_CIPHER_SUITE_WEP104: 1634 tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; 1635 /* fall through */ 1636 case WLAN_CIPHER_SUITE_WEP40: 1637 tx_cmd->sec_ctl |= 1638 (TX_CMD_SEC_WEP | (keyconf->keyidx & TX_CMD_SEC_MSK) << 1639 TX_CMD_SEC_SHIFT); 1640 1641 memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen); 1642 1643 D_TX("Configuring packet for WEP encryption " "with key %d\n", 1644 keyconf->keyidx); 1645 break; 1646 1647 default: 1648 IL_ERR("Unknown encode cipher %x\n", keyconf->cipher); 1649 break; 1650 } 1651 } 1652 1653 /* 1654 * start C_TX command process 1655 */ 1656 int 1657 il4965_tx_skb(struct il_priv *il, 1658 struct ieee80211_sta *sta, 1659 struct sk_buff *skb) 1660 { 1661 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; 1662 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); 1663 struct il_station_priv *sta_priv = NULL; 1664 struct il_tx_queue *txq; 1665 struct il_queue *q; 1666 struct il_device_cmd *out_cmd; 1667 struct il_cmd_meta *out_meta; 1668 struct il_tx_cmd *tx_cmd; 1669 int txq_id; 1670 dma_addr_t phys_addr; 1671 dma_addr_t txcmd_phys; 1672 dma_addr_t scratch_phys; 1673 u16 len, firstlen, secondlen; 1674 u16 seq_number = 0; 1675 __le16 fc; 1676 u8 hdr_len; 1677 u8 sta_id; 1678 u8 wait_write_ptr = 0; 1679 u8 tid = 0; 1680 u8 *qc = NULL; 1681 unsigned long flags; 1682 bool is_agg = false; 1683 1684 spin_lock_irqsave(&il->lock, flags); 1685 if (il_is_rfkill(il)) { 1686 D_DROP("Dropping - RF KILL\n"); 1687 goto drop_unlock; 1688 } 1689 1690 fc = hdr->frame_control; 1691 1692 #ifdef CONFIG_IWLEGACY_DEBUG 1693 if (ieee80211_is_auth(fc)) 1694 D_TX("Sending AUTH frame\n"); 1695 else if (ieee80211_is_assoc_req(fc)) 1696 D_TX("Sending ASSOC frame\n"); 1697 else if (ieee80211_is_reassoc_req(fc)) 1698 D_TX("Sending REASSOC frame\n"); 1699 #endif 1700 1701 hdr_len = ieee80211_hdrlen(fc); 1702 1703 /* For management frames use broadcast id to do not break aggregation */ 1704 if (!ieee80211_is_data(fc)) 1705 sta_id = il->hw_params.bcast_id; 1706 else { 1707 /* Find idx into station table for destination station */ 1708 sta_id = il_sta_id_or_broadcast(il, sta); 1709 1710 if (sta_id == IL_INVALID_STATION) { 1711 D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1); 1712 goto drop_unlock; 1713 } 1714 } 1715 1716 D_TX("station Id %d\n", sta_id); 1717 1718 if (sta) 1719 sta_priv = (void *)sta->drv_priv; 1720 1721 if (sta_priv && sta_priv->asleep && 1722 (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) { 1723 /* 1724 * This sends an asynchronous command to the device, 1725 * but we can rely on it being processed before the 1726 * next frame is processed -- and the next frame to 1727 * this station is the one that will consume this 1728 * counter. 1729 * For now set the counter to just 1 since we do not 1730 * support uAPSD yet. 1731 */ 1732 il4965_sta_modify_sleep_tx_count(il, sta_id, 1); 1733 } 1734 1735 /* FIXME: remove me ? */ 1736 WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM); 1737 1738 /* Access category (AC) is also the queue number */ 1739 txq_id = skb_get_queue_mapping(skb); 1740 1741 /* irqs already disabled/saved above when locking il->lock */ 1742 spin_lock(&il->sta_lock); 1743 1744 if (ieee80211_is_data_qos(fc)) { 1745 qc = ieee80211_get_qos_ctl(hdr); 1746 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; 1747 if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) { 1748 spin_unlock(&il->sta_lock); 1749 goto drop_unlock; 1750 } 1751 seq_number = il->stations[sta_id].tid[tid].seq_number; 1752 seq_number &= IEEE80211_SCTL_SEQ; 1753 hdr->seq_ctrl = 1754 hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG); 1755 hdr->seq_ctrl |= cpu_to_le16(seq_number); 1756 seq_number += 0x10; 1757 /* aggregation is on for this <sta,tid> */ 1758 if (info->flags & IEEE80211_TX_CTL_AMPDU && 1759 il->stations[sta_id].tid[tid].agg.state == IL_AGG_ON) { 1760 txq_id = il->stations[sta_id].tid[tid].agg.txq_id; 1761 is_agg = true; 1762 } 1763 } 1764 1765 txq = &il->txq[txq_id]; 1766 q = &txq->q; 1767 1768 if (unlikely(il_queue_space(q) < q->high_mark)) { 1769 spin_unlock(&il->sta_lock); 1770 goto drop_unlock; 1771 } 1772 1773 if (ieee80211_is_data_qos(fc)) { 1774 il->stations[sta_id].tid[tid].tfds_in_queue++; 1775 if (!ieee80211_has_morefrags(fc)) 1776 il->stations[sta_id].tid[tid].seq_number = seq_number; 1777 } 1778 1779 spin_unlock(&il->sta_lock); 1780 1781 txq->skbs[q->write_ptr] = skb; 1782 1783 /* Set up first empty entry in queue's array of Tx/cmd buffers */ 1784 out_cmd = txq->cmd[q->write_ptr]; 1785 out_meta = &txq->meta[q->write_ptr]; 1786 tx_cmd = &out_cmd->cmd.tx; 1787 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); 1788 memset(tx_cmd, 0, sizeof(struct il_tx_cmd)); 1789 1790 /* 1791 * Set up the Tx-command (not MAC!) header. 1792 * Store the chosen Tx queue and TFD idx within the sequence field; 1793 * after Tx, uCode's Tx response will return this value so driver can 1794 * locate the frame within the tx queue and do post-tx processing. 1795 */ 1796 out_cmd->hdr.cmd = C_TX; 1797 out_cmd->hdr.sequence = 1798 cpu_to_le16((u16) 1799 (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr))); 1800 1801 /* Copy MAC header from skb into command buffer */ 1802 memcpy(tx_cmd->hdr, hdr, hdr_len); 1803 1804 /* Total # bytes to be transmitted */ 1805 tx_cmd->len = cpu_to_le16((u16) skb->len); 1806 1807 if (info->control.hw_key) 1808 il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id); 1809 1810 /* TODO need this for burst mode later on */ 1811 il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id); 1812 1813 il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc); 1814 1815 /* 1816 * Use the first empty entry in this queue's command buffer array 1817 * to contain the Tx command and MAC header concatenated together 1818 * (payload data will be in another buffer). 1819 * Size of this varies, due to varying MAC header length. 1820 * If end is not dword aligned, we'll have 2 extra bytes at the end 1821 * of the MAC header (device reads on dword boundaries). 1822 * We'll tell device about this padding later. 1823 */ 1824 len = sizeof(struct il_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len; 1825 firstlen = (len + 3) & ~3; 1826 1827 /* Tell NIC about any 2-byte padding after MAC header */ 1828 if (firstlen != len) 1829 tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; 1830 1831 /* Physical address of this Tx command's header (not MAC header!), 1832 * within command buffer array. */ 1833 txcmd_phys = 1834 pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, 1835 PCI_DMA_BIDIRECTIONAL); 1836 if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) 1837 goto drop_unlock; 1838 1839 /* Set up TFD's 2nd entry to point directly to remainder of skb, 1840 * if any (802.11 null frames have no payload). */ 1841 secondlen = skb->len - hdr_len; 1842 if (secondlen > 0) { 1843 phys_addr = 1844 pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, 1845 PCI_DMA_TODEVICE); 1846 if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) 1847 goto drop_unlock; 1848 } 1849 1850 /* Add buffer containing Tx command and MAC(!) header to TFD's 1851 * first entry */ 1852 il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); 1853 dma_unmap_addr_set(out_meta, mapping, txcmd_phys); 1854 dma_unmap_len_set(out_meta, len, firstlen); 1855 if (secondlen) 1856 il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 1857 0, 0); 1858 1859 if (!ieee80211_has_morefrags(hdr->frame_control)) { 1860 txq->need_update = 1; 1861 } else { 1862 wait_write_ptr = 1; 1863 txq->need_update = 0; 1864 } 1865 1866 scratch_phys = 1867 txcmd_phys + sizeof(struct il_cmd_header) + 1868 offsetof(struct il_tx_cmd, scratch); 1869 1870 /* take back ownership of DMA buffer to enable update */ 1871 pci_dma_sync_single_for_cpu(il->pci_dev, txcmd_phys, firstlen, 1872 PCI_DMA_BIDIRECTIONAL); 1873 tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); 1874 tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys); 1875 1876 il_update_stats(il, true, fc, skb->len); 1877 1878 D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); 1879 D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); 1880 il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd)); 1881 il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, hdr_len); 1882 1883 /* Set up entry for this TFD in Tx byte-count array */ 1884 if (info->flags & IEEE80211_TX_CTL_AMPDU) 1885 il->ops->txq_update_byte_cnt_tbl(il, txq, le16_to_cpu(tx_cmd->len)); 1886 1887 pci_dma_sync_single_for_device(il->pci_dev, txcmd_phys, firstlen, 1888 PCI_DMA_BIDIRECTIONAL); 1889 1890 /* Tell device the write idx *just past* this latest filled TFD */ 1891 q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); 1892 il_txq_update_write_ptr(il, txq); 1893 spin_unlock_irqrestore(&il->lock, flags); 1894 1895 /* 1896 * At this point the frame is "transmitted" successfully 1897 * and we will get a TX status notification eventually, 1898 * regardless of the value of ret. "ret" only indicates 1899 * whether or not we should update the write pointer. 1900 */ 1901 1902 /* 1903 * Avoid atomic ops if it isn't an associated client. 1904 * Also, if this is a packet for aggregation, don't 1905 * increase the counter because the ucode will stop 1906 * aggregation queues when their respective station 1907 * goes to sleep. 1908 */ 1909 if (sta_priv && sta_priv->client && !is_agg) 1910 atomic_inc(&sta_priv->pending_frames); 1911 1912 if (il_queue_space(q) < q->high_mark && il->mac80211_registered) { 1913 if (wait_write_ptr) { 1914 spin_lock_irqsave(&il->lock, flags); 1915 txq->need_update = 1; 1916 il_txq_update_write_ptr(il, txq); 1917 spin_unlock_irqrestore(&il->lock, flags); 1918 } else { 1919 il_stop_queue(il, txq); 1920 } 1921 } 1922 1923 return 0; 1924 1925 drop_unlock: 1926 spin_unlock_irqrestore(&il->lock, flags); 1927 return -1; 1928 } 1929 1930 static inline int 1931 il4965_alloc_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr, size_t size) 1932 { 1933 ptr->addr = dma_alloc_coherent(&il->pci_dev->dev, size, &ptr->dma, 1934 GFP_KERNEL); 1935 if (!ptr->addr) 1936 return -ENOMEM; 1937 ptr->size = size; 1938 return 0; 1939 } 1940 1941 static inline void 1942 il4965_free_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr) 1943 { 1944 if (unlikely(!ptr->addr)) 1945 return; 1946 1947 dma_free_coherent(&il->pci_dev->dev, ptr->size, ptr->addr, ptr->dma); 1948 memset(ptr, 0, sizeof(*ptr)); 1949 } 1950 1951 /** 1952 * il4965_hw_txq_ctx_free - Free TXQ Context 1953 * 1954 * Destroy all TX DMA queues and structures 1955 */ 1956 void 1957 il4965_hw_txq_ctx_free(struct il_priv *il) 1958 { 1959 int txq_id; 1960 1961 /* Tx queues */ 1962 if (il->txq) { 1963 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) 1964 if (txq_id == il->cmd_queue) 1965 il_cmd_queue_free(il); 1966 else 1967 il_tx_queue_free(il, txq_id); 1968 } 1969 il4965_free_dma_ptr(il, &il->kw); 1970 1971 il4965_free_dma_ptr(il, &il->scd_bc_tbls); 1972 1973 /* free tx queue structure */ 1974 il_free_txq_mem(il); 1975 } 1976 1977 /** 1978 * il4965_txq_ctx_alloc - allocate TX queue context 1979 * Allocate all Tx DMA structures and initialize them 1980 * 1981 * @param il 1982 * @return error code 1983 */ 1984 int 1985 il4965_txq_ctx_alloc(struct il_priv *il) 1986 { 1987 int ret, txq_id; 1988 unsigned long flags; 1989 1990 /* Free all tx/cmd queues and keep-warm buffer */ 1991 il4965_hw_txq_ctx_free(il); 1992 1993 ret = 1994 il4965_alloc_dma_ptr(il, &il->scd_bc_tbls, 1995 il->hw_params.scd_bc_tbls_size); 1996 if (ret) { 1997 IL_ERR("Scheduler BC Table allocation failed\n"); 1998 goto error_bc_tbls; 1999 } 2000 /* Alloc keep-warm buffer */ 2001 ret = il4965_alloc_dma_ptr(il, &il->kw, IL_KW_SIZE); 2002 if (ret) { 2003 IL_ERR("Keep Warm allocation failed\n"); 2004 goto error_kw; 2005 } 2006 2007 /* allocate tx queue structure */ 2008 ret = il_alloc_txq_mem(il); 2009 if (ret) 2010 goto error; 2011 2012 spin_lock_irqsave(&il->lock, flags); 2013 2014 /* Turn off all Tx DMA fifos */ 2015 il4965_txq_set_sched(il, 0); 2016 2017 /* Tell NIC where to find the "keep warm" buffer */ 2018 il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); 2019 2020 spin_unlock_irqrestore(&il->lock, flags); 2021 2022 /* Alloc and init all Tx queues, including the command queue (#4/#9) */ 2023 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { 2024 ret = il_tx_queue_init(il, txq_id); 2025 if (ret) { 2026 IL_ERR("Tx %d queue init failed\n", txq_id); 2027 goto error; 2028 } 2029 } 2030 2031 return ret; 2032 2033 error: 2034 il4965_hw_txq_ctx_free(il); 2035 il4965_free_dma_ptr(il, &il->kw); 2036 error_kw: 2037 il4965_free_dma_ptr(il, &il->scd_bc_tbls); 2038 error_bc_tbls: 2039 return ret; 2040 } 2041 2042 void 2043 il4965_txq_ctx_reset(struct il_priv *il) 2044 { 2045 int txq_id; 2046 unsigned long flags; 2047 2048 spin_lock_irqsave(&il->lock, flags); 2049 2050 /* Turn off all Tx DMA fifos */ 2051 il4965_txq_set_sched(il, 0); 2052 /* Tell NIC where to find the "keep warm" buffer */ 2053 il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); 2054 2055 spin_unlock_irqrestore(&il->lock, flags); 2056 2057 /* Alloc and init all Tx queues, including the command queue (#4) */ 2058 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) 2059 il_tx_queue_reset(il, txq_id); 2060 } 2061 2062 static void 2063 il4965_txq_ctx_unmap(struct il_priv *il) 2064 { 2065 int txq_id; 2066 2067 if (!il->txq) 2068 return; 2069 2070 /* Unmap DMA from host system and free skb's */ 2071 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) 2072 if (txq_id == il->cmd_queue) 2073 il_cmd_queue_unmap(il); 2074 else 2075 il_tx_queue_unmap(il, txq_id); 2076 } 2077 2078 /** 2079 * il4965_txq_ctx_stop - Stop all Tx DMA channels 2080 */ 2081 void 2082 il4965_txq_ctx_stop(struct il_priv *il) 2083 { 2084 int ch, ret; 2085 2086 _il_wr_prph(il, IL49_SCD_TXFACT, 0); 2087 2088 /* Stop each Tx DMA channel, and wait for it to be idle */ 2089 for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) { 2090 _il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0); 2091 ret = 2092 _il_poll_bit(il, FH49_TSSR_TX_STATUS_REG, 2093 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), 2094 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), 2095 1000); 2096 if (ret < 0) 2097 IL_ERR("Timeout stopping DMA channel %d [0x%08x]", 2098 ch, _il_rd(il, FH49_TSSR_TX_STATUS_REG)); 2099 } 2100 } 2101 2102 /* 2103 * Find first available (lowest unused) Tx Queue, mark it "active". 2104 * Called only when finding queue for aggregation. 2105 * Should never return anything < 7, because they should already 2106 * be in use as EDCA AC (0-3), Command (4), reserved (5, 6) 2107 */ 2108 static int 2109 il4965_txq_ctx_activate_free(struct il_priv *il) 2110 { 2111 int txq_id; 2112 2113 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) 2114 if (!test_and_set_bit(txq_id, &il->txq_ctx_active_msk)) 2115 return txq_id; 2116 return -1; 2117 } 2118 2119 /** 2120 * il4965_tx_queue_stop_scheduler - Stop queue, but keep configuration 2121 */ 2122 static void 2123 il4965_tx_queue_stop_scheduler(struct il_priv *il, u16 txq_id) 2124 { 2125 /* Simply stop the queue, but don't change any configuration; 2126 * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ 2127 il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), 2128 (0 << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | 2129 (1 << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); 2130 } 2131 2132 /** 2133 * il4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue 2134 */ 2135 static int 2136 il4965_tx_queue_set_q2ratid(struct il_priv *il, u16 ra_tid, u16 txq_id) 2137 { 2138 u32 tbl_dw_addr; 2139 u32 tbl_dw; 2140 u16 scd_q2ratid; 2141 2142 scd_q2ratid = ra_tid & IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK; 2143 2144 tbl_dw_addr = 2145 il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); 2146 2147 tbl_dw = il_read_targ_mem(il, tbl_dw_addr); 2148 2149 if (txq_id & 0x1) 2150 tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); 2151 else 2152 tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); 2153 2154 il_write_targ_mem(il, tbl_dw_addr, tbl_dw); 2155 2156 return 0; 2157 } 2158 2159 /** 2160 * il4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue 2161 * 2162 * NOTE: txq_id must be greater than IL49_FIRST_AMPDU_QUEUE, 2163 * i.e. it must be one of the higher queues used for aggregation 2164 */ 2165 static int 2166 il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id, 2167 int tid, u16 ssn_idx) 2168 { 2169 unsigned long flags; 2170 u16 ra_tid; 2171 int ret; 2172 2173 if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || 2174 (IL49_FIRST_AMPDU_QUEUE + 2175 il->cfg->num_of_ampdu_queues <= txq_id)) { 2176 IL_WARN("queue number out of range: %d, must be %d to %d\n", 2177 txq_id, IL49_FIRST_AMPDU_QUEUE, 2178 IL49_FIRST_AMPDU_QUEUE + 2179 il->cfg->num_of_ampdu_queues - 1); 2180 return -EINVAL; 2181 } 2182 2183 ra_tid = BUILD_RAxTID(sta_id, tid); 2184 2185 /* Modify device's station table to Tx this TID */ 2186 ret = il4965_sta_tx_modify_enable_tid(il, sta_id, tid); 2187 if (ret) 2188 return ret; 2189 2190 spin_lock_irqsave(&il->lock, flags); 2191 2192 /* Stop this Tx queue before configuring it */ 2193 il4965_tx_queue_stop_scheduler(il, txq_id); 2194 2195 /* Map receiver-address / traffic-ID to this queue */ 2196 il4965_tx_queue_set_q2ratid(il, ra_tid, txq_id); 2197 2198 /* Set this queue as a chain-building queue */ 2199 il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); 2200 2201 /* Place first TFD at idx corresponding to start sequence number. 2202 * Assumes that ssn_idx is valid (!= 0xFFF) */ 2203 il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); 2204 il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); 2205 il4965_set_wr_ptrs(il, txq_id, ssn_idx); 2206 2207 /* Set up Tx win size and frame limit for this queue */ 2208 il_write_targ_mem(il, 2209 il->scd_base_addr + 2210 IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), 2211 (SCD_WIN_SIZE << IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) 2212 & IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); 2213 2214 il_write_targ_mem(il, 2215 il->scd_base_addr + 2216 IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), 2217 (SCD_FRAME_LIMIT << 2218 IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & 2219 IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); 2220 2221 il_set_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); 2222 2223 /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */ 2224 il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 1); 2225 2226 spin_unlock_irqrestore(&il->lock, flags); 2227 2228 return 0; 2229 } 2230 2231 int 2232 il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif, 2233 struct ieee80211_sta *sta, u16 tid, u16 * ssn) 2234 { 2235 int sta_id; 2236 int tx_fifo; 2237 int txq_id; 2238 int ret; 2239 unsigned long flags; 2240 struct il_tid_data *tid_data; 2241 2242 /* FIXME: warning if tx fifo not found ? */ 2243 tx_fifo = il4965_get_fifo_from_tid(tid); 2244 if (unlikely(tx_fifo < 0)) 2245 return tx_fifo; 2246 2247 D_HT("%s on ra = %pM tid = %d\n", __func__, sta->addr, tid); 2248 2249 sta_id = il_sta_id(sta); 2250 if (sta_id == IL_INVALID_STATION) { 2251 IL_ERR("Start AGG on invalid station\n"); 2252 return -ENXIO; 2253 } 2254 if (unlikely(tid >= MAX_TID_COUNT)) 2255 return -EINVAL; 2256 2257 if (il->stations[sta_id].tid[tid].agg.state != IL_AGG_OFF) { 2258 IL_ERR("Start AGG when state is not IL_AGG_OFF !\n"); 2259 return -ENXIO; 2260 } 2261 2262 txq_id = il4965_txq_ctx_activate_free(il); 2263 if (txq_id == -1) { 2264 IL_ERR("No free aggregation queue available\n"); 2265 return -ENXIO; 2266 } 2267 2268 spin_lock_irqsave(&il->sta_lock, flags); 2269 tid_data = &il->stations[sta_id].tid[tid]; 2270 *ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); 2271 tid_data->agg.txq_id = txq_id; 2272 il_set_swq_id(&il->txq[txq_id], il4965_get_ac_from_tid(tid), txq_id); 2273 spin_unlock_irqrestore(&il->sta_lock, flags); 2274 2275 ret = il4965_txq_agg_enable(il, txq_id, tx_fifo, sta_id, tid, *ssn); 2276 if (ret) 2277 return ret; 2278 2279 spin_lock_irqsave(&il->sta_lock, flags); 2280 tid_data = &il->stations[sta_id].tid[tid]; 2281 if (tid_data->tfds_in_queue == 0) { 2282 D_HT("HW queue is empty\n"); 2283 tid_data->agg.state = IL_AGG_ON; 2284 ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); 2285 } else { 2286 D_HT("HW queue is NOT empty: %d packets in HW queue\n", 2287 tid_data->tfds_in_queue); 2288 tid_data->agg.state = IL_EMPTYING_HW_QUEUE_ADDBA; 2289 } 2290 spin_unlock_irqrestore(&il->sta_lock, flags); 2291 return ret; 2292 } 2293 2294 /** 2295 * txq_id must be greater than IL49_FIRST_AMPDU_QUEUE 2296 * il->lock must be held by the caller 2297 */ 2298 static int 2299 il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo) 2300 { 2301 if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || 2302 (IL49_FIRST_AMPDU_QUEUE + 2303 il->cfg->num_of_ampdu_queues <= txq_id)) { 2304 IL_WARN("queue number out of range: %d, must be %d to %d\n", 2305 txq_id, IL49_FIRST_AMPDU_QUEUE, 2306 IL49_FIRST_AMPDU_QUEUE + 2307 il->cfg->num_of_ampdu_queues - 1); 2308 return -EINVAL; 2309 } 2310 2311 il4965_tx_queue_stop_scheduler(il, txq_id); 2312 2313 il_clear_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); 2314 2315 il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); 2316 il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); 2317 /* supposes that ssn_idx is valid (!= 0xFFF) */ 2318 il4965_set_wr_ptrs(il, txq_id, ssn_idx); 2319 2320 il_clear_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); 2321 il_txq_ctx_deactivate(il, txq_id); 2322 il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 0); 2323 2324 return 0; 2325 } 2326 2327 int 2328 il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif, 2329 struct ieee80211_sta *sta, u16 tid) 2330 { 2331 int tx_fifo_id, txq_id, sta_id, ssn; 2332 struct il_tid_data *tid_data; 2333 int write_ptr, read_ptr; 2334 unsigned long flags; 2335 2336 /* FIXME: warning if tx_fifo_id not found ? */ 2337 tx_fifo_id = il4965_get_fifo_from_tid(tid); 2338 if (unlikely(tx_fifo_id < 0)) 2339 return tx_fifo_id; 2340 2341 sta_id = il_sta_id(sta); 2342 2343 if (sta_id == IL_INVALID_STATION) { 2344 IL_ERR("Invalid station for AGG tid %d\n", tid); 2345 return -ENXIO; 2346 } 2347 2348 spin_lock_irqsave(&il->sta_lock, flags); 2349 2350 tid_data = &il->stations[sta_id].tid[tid]; 2351 ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; 2352 txq_id = tid_data->agg.txq_id; 2353 2354 switch (il->stations[sta_id].tid[tid].agg.state) { 2355 case IL_EMPTYING_HW_QUEUE_ADDBA: 2356 /* 2357 * This can happen if the peer stops aggregation 2358 * again before we've had a chance to drain the 2359 * queue we selected previously, i.e. before the 2360 * session was really started completely. 2361 */ 2362 D_HT("AGG stop before setup done\n"); 2363 goto turn_off; 2364 case IL_AGG_ON: 2365 break; 2366 default: 2367 IL_WARN("Stopping AGG while state not ON or starting\n"); 2368 } 2369 2370 write_ptr = il->txq[txq_id].q.write_ptr; 2371 read_ptr = il->txq[txq_id].q.read_ptr; 2372 2373 /* The queue is not empty */ 2374 if (write_ptr != read_ptr) { 2375 D_HT("Stopping a non empty AGG HW QUEUE\n"); 2376 il->stations[sta_id].tid[tid].agg.state = 2377 IL_EMPTYING_HW_QUEUE_DELBA; 2378 spin_unlock_irqrestore(&il->sta_lock, flags); 2379 return 0; 2380 } 2381 2382 D_HT("HW queue is empty\n"); 2383 turn_off: 2384 il->stations[sta_id].tid[tid].agg.state = IL_AGG_OFF; 2385 2386 /* do not restore/save irqs */ 2387 spin_unlock(&il->sta_lock); 2388 spin_lock(&il->lock); 2389 2390 /* 2391 * the only reason this call can fail is queue number out of range, 2392 * which can happen if uCode is reloaded and all the station 2393 * information are lost. if it is outside the range, there is no need 2394 * to deactivate the uCode queue, just return "success" to allow 2395 * mac80211 to clean up it own data. 2396 */ 2397 il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo_id); 2398 spin_unlock_irqrestore(&il->lock, flags); 2399 2400 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); 2401 2402 return 0; 2403 } 2404 2405 int 2406 il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id) 2407 { 2408 struct il_queue *q = &il->txq[txq_id].q; 2409 u8 *addr = il->stations[sta_id].sta.sta.addr; 2410 struct il_tid_data *tid_data = &il->stations[sta_id].tid[tid]; 2411 2412 lockdep_assert_held(&il->sta_lock); 2413 2414 switch (il->stations[sta_id].tid[tid].agg.state) { 2415 case IL_EMPTYING_HW_QUEUE_DELBA: 2416 /* We are reclaiming the last packet of the */ 2417 /* aggregated HW queue */ 2418 if (txq_id == tid_data->agg.txq_id && 2419 q->read_ptr == q->write_ptr) { 2420 u16 ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); 2421 int tx_fifo = il4965_get_fifo_from_tid(tid); 2422 D_HT("HW queue empty: continue DELBA flow\n"); 2423 il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo); 2424 tid_data->agg.state = IL_AGG_OFF; 2425 ieee80211_stop_tx_ba_cb_irqsafe(il->vif, addr, tid); 2426 } 2427 break; 2428 case IL_EMPTYING_HW_QUEUE_ADDBA: 2429 /* We are reclaiming the last packet of the queue */ 2430 if (tid_data->tfds_in_queue == 0) { 2431 D_HT("HW queue empty: continue ADDBA flow\n"); 2432 tid_data->agg.state = IL_AGG_ON; 2433 ieee80211_start_tx_ba_cb_irqsafe(il->vif, addr, tid); 2434 } 2435 break; 2436 } 2437 2438 return 0; 2439 } 2440 2441 static void 2442 il4965_non_agg_tx_status(struct il_priv *il, const u8 *addr1) 2443 { 2444 struct ieee80211_sta *sta; 2445 struct il_station_priv *sta_priv; 2446 2447 rcu_read_lock(); 2448 sta = ieee80211_find_sta(il->vif, addr1); 2449 if (sta) { 2450 sta_priv = (void *)sta->drv_priv; 2451 /* avoid atomic ops if this isn't a client */ 2452 if (sta_priv->client && 2453 atomic_dec_return(&sta_priv->pending_frames) == 0) 2454 ieee80211_sta_block_awake(il->hw, sta, false); 2455 } 2456 rcu_read_unlock(); 2457 } 2458 2459 static void 2460 il4965_tx_status(struct il_priv *il, struct sk_buff *skb, bool is_agg) 2461 { 2462 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; 2463 2464 if (!is_agg) 2465 il4965_non_agg_tx_status(il, hdr->addr1); 2466 2467 ieee80211_tx_status_irqsafe(il->hw, skb); 2468 } 2469 2470 int 2471 il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx) 2472 { 2473 struct il_tx_queue *txq = &il->txq[txq_id]; 2474 struct il_queue *q = &txq->q; 2475 int nfreed = 0; 2476 struct ieee80211_hdr *hdr; 2477 struct sk_buff *skb; 2478 2479 if (idx >= q->n_bd || il_queue_used(q, idx) == 0) { 2480 IL_ERR("Read idx for DMA queue txq id (%d), idx %d, " 2481 "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd, 2482 q->write_ptr, q->read_ptr); 2483 return 0; 2484 } 2485 2486 for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; 2487 q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { 2488 2489 skb = txq->skbs[txq->q.read_ptr]; 2490 2491 if (WARN_ON_ONCE(skb == NULL)) 2492 continue; 2493 2494 hdr = (struct ieee80211_hdr *) skb->data; 2495 if (ieee80211_is_data_qos(hdr->frame_control)) 2496 nfreed++; 2497 2498 il4965_tx_status(il, skb, txq_id >= IL4965_FIRST_AMPDU_QUEUE); 2499 2500 txq->skbs[txq->q.read_ptr] = NULL; 2501 il->ops->txq_free_tfd(il, txq); 2502 } 2503 return nfreed; 2504 } 2505 2506 /** 2507 * il4965_tx_status_reply_compressed_ba - Update tx status from block-ack 2508 * 2509 * Go through block-ack's bitmap of ACK'd frames, update driver's record of 2510 * ACK vs. not. This gets sent to mac80211, then to rate scaling algo. 2511 */ 2512 static int 2513 il4965_tx_status_reply_compressed_ba(struct il_priv *il, struct il_ht_agg *agg, 2514 struct il_compressed_ba_resp *ba_resp) 2515 { 2516 int i, sh, ack; 2517 u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl); 2518 u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); 2519 int successes = 0; 2520 struct ieee80211_tx_info *info; 2521 u64 bitmap, sent_bitmap; 2522 2523 if (unlikely(!agg->wait_for_ba)) { 2524 if (unlikely(ba_resp->bitmap)) 2525 IL_ERR("Received BA when not expected\n"); 2526 return -EINVAL; 2527 } 2528 2529 /* Mark that the expected block-ack response arrived */ 2530 agg->wait_for_ba = 0; 2531 D_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl); 2532 2533 /* Calculate shift to align block-ack bits with our Tx win bits */ 2534 sh = agg->start_idx - SEQ_TO_IDX(seq_ctl >> 4); 2535 if (sh < 0) /* tbw something is wrong with indices */ 2536 sh += 0x100; 2537 2538 if (agg->frame_count > (64 - sh)) { 2539 D_TX_REPLY("more frames than bitmap size"); 2540 return -1; 2541 } 2542 2543 /* don't use 64-bit values for now */ 2544 bitmap = le64_to_cpu(ba_resp->bitmap) >> sh; 2545 2546 /* check for success or failure according to the 2547 * transmitted bitmap and block-ack bitmap */ 2548 sent_bitmap = bitmap & agg->bitmap; 2549 2550 /* For each frame attempted in aggregation, 2551 * update driver's record of tx frame's status. */ 2552 i = 0; 2553 while (sent_bitmap) { 2554 ack = sent_bitmap & 1ULL; 2555 successes += ack; 2556 D_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack ? "ACK" : "NACK", 2557 i, (agg->start_idx + i) & 0xff, agg->start_idx + i); 2558 sent_bitmap >>= 1; 2559 ++i; 2560 } 2561 2562 D_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap); 2563 2564 info = IEEE80211_SKB_CB(il->txq[scd_flow].skbs[agg->start_idx]); 2565 memset(&info->status, 0, sizeof(info->status)); 2566 info->flags |= IEEE80211_TX_STAT_ACK; 2567 info->flags |= IEEE80211_TX_STAT_AMPDU; 2568 info->status.ampdu_ack_len = successes; 2569 info->status.ampdu_len = agg->frame_count; 2570 il4965_hwrate_to_tx_control(il, agg->rate_n_flags, info); 2571 2572 return 0; 2573 } 2574 2575 static inline bool 2576 il4965_is_tx_success(u32 status) 2577 { 2578 status &= TX_STATUS_MSK; 2579 return (status == TX_STATUS_SUCCESS || status == TX_STATUS_DIRECT_DONE); 2580 } 2581 2582 static u8 2583 il4965_find_station(struct il_priv *il, const u8 *addr) 2584 { 2585 int i; 2586 int start = 0; 2587 int ret = IL_INVALID_STATION; 2588 unsigned long flags; 2589 2590 if (il->iw_mode == NL80211_IFTYPE_ADHOC) 2591 start = IL_STA_ID; 2592 2593 if (is_broadcast_ether_addr(addr)) 2594 return il->hw_params.bcast_id; 2595 2596 spin_lock_irqsave(&il->sta_lock, flags); 2597 for (i = start; i < il->hw_params.max_stations; i++) 2598 if (il->stations[i].used && 2599 ether_addr_equal(il->stations[i].sta.sta.addr, addr)) { 2600 ret = i; 2601 goto out; 2602 } 2603 2604 D_ASSOC("can not find STA %pM total %d\n", addr, il->num_stations); 2605 2606 out: 2607 /* 2608 * It may be possible that more commands interacting with stations 2609 * arrive before we completed processing the adding of 2610 * station 2611 */ 2612 if (ret != IL_INVALID_STATION && 2613 (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) || 2614 ((il->stations[ret].used & IL_STA_UCODE_ACTIVE) && 2615 (il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) { 2616 IL_ERR("Requested station info for sta %d before ready.\n", 2617 ret); 2618 ret = IL_INVALID_STATION; 2619 } 2620 spin_unlock_irqrestore(&il->sta_lock, flags); 2621 return ret; 2622 } 2623 2624 static int 2625 il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr) 2626 { 2627 if (il->iw_mode == NL80211_IFTYPE_STATION) 2628 return IL_AP_ID; 2629 else { 2630 u8 *da = ieee80211_get_DA(hdr); 2631 2632 return il4965_find_station(il, da); 2633 } 2634 } 2635 2636 static inline u32 2637 il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp) 2638 { 2639 return le32_to_cpup(&tx_resp->u.status + 2640 tx_resp->frame_count) & IEEE80211_MAX_SN; 2641 } 2642 2643 static inline u32 2644 il4965_tx_status_to_mac80211(u32 status) 2645 { 2646 status &= TX_STATUS_MSK; 2647 2648 switch (status) { 2649 case TX_STATUS_SUCCESS: 2650 case TX_STATUS_DIRECT_DONE: 2651 return IEEE80211_TX_STAT_ACK; 2652 case TX_STATUS_FAIL_DEST_PS: 2653 return IEEE80211_TX_STAT_TX_FILTERED; 2654 default: 2655 return 0; 2656 } 2657 } 2658 2659 /** 2660 * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue 2661 */ 2662 static int 2663 il4965_tx_status_reply_tx(struct il_priv *il, struct il_ht_agg *agg, 2664 struct il4965_tx_resp *tx_resp, int txq_id, 2665 u16 start_idx) 2666 { 2667 u16 status; 2668 struct agg_tx_status *frame_status = tx_resp->u.agg_status; 2669 struct ieee80211_tx_info *info = NULL; 2670 struct ieee80211_hdr *hdr = NULL; 2671 u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); 2672 int i, sh, idx; 2673 u16 seq; 2674 if (agg->wait_for_ba) 2675 D_TX_REPLY("got tx response w/o block-ack\n"); 2676 2677 agg->frame_count = tx_resp->frame_count; 2678 agg->start_idx = start_idx; 2679 agg->rate_n_flags = rate_n_flags; 2680 agg->bitmap = 0; 2681 2682 /* num frames attempted by Tx command */ 2683 if (agg->frame_count == 1) { 2684 /* Only one frame was attempted; no block-ack will arrive */ 2685 status = le16_to_cpu(frame_status[0].status); 2686 idx = start_idx; 2687 2688 D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n", 2689 agg->frame_count, agg->start_idx, idx); 2690 2691 info = IEEE80211_SKB_CB(il->txq[txq_id].skbs[idx]); 2692 info->status.rates[0].count = tx_resp->failure_frame + 1; 2693 info->flags &= ~IEEE80211_TX_CTL_AMPDU; 2694 info->flags |= il4965_tx_status_to_mac80211(status); 2695 il4965_hwrate_to_tx_control(il, rate_n_flags, info); 2696 2697 D_TX_REPLY("1 Frame 0x%x failure :%d\n", status & 0xff, 2698 tx_resp->failure_frame); 2699 D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags); 2700 2701 agg->wait_for_ba = 0; 2702 } else { 2703 /* Two or more frames were attempted; expect block-ack */ 2704 u64 bitmap = 0; 2705 int start = agg->start_idx; 2706 struct sk_buff *skb; 2707 2708 /* Construct bit-map of pending frames within Tx win */ 2709 for (i = 0; i < agg->frame_count; i++) { 2710 u16 sc; 2711 status = le16_to_cpu(frame_status[i].status); 2712 seq = le16_to_cpu(frame_status[i].sequence); 2713 idx = SEQ_TO_IDX(seq); 2714 txq_id = SEQ_TO_QUEUE(seq); 2715 2716 if (status & 2717 (AGG_TX_STATE_FEW_BYTES_MSK | 2718 AGG_TX_STATE_ABORT_MSK)) 2719 continue; 2720 2721 D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n", 2722 agg->frame_count, txq_id, idx); 2723 2724 skb = il->txq[txq_id].skbs[idx]; 2725 if (WARN_ON_ONCE(skb == NULL)) 2726 return -1; 2727 hdr = (struct ieee80211_hdr *) skb->data; 2728 2729 sc = le16_to_cpu(hdr->seq_ctrl); 2730 if (idx != (IEEE80211_SEQ_TO_SN(sc) & 0xff)) { 2731 IL_ERR("BUG_ON idx doesn't match seq control" 2732 " idx=%d, seq_idx=%d, seq=%d\n", idx, 2733 IEEE80211_SEQ_TO_SN(sc), hdr->seq_ctrl); 2734 return -1; 2735 } 2736 2737 D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", i, idx, 2738 IEEE80211_SEQ_TO_SN(sc)); 2739 2740 sh = idx - start; 2741 if (sh > 64) { 2742 sh = (start - idx) + 0xff; 2743 bitmap = bitmap << sh; 2744 sh = 0; 2745 start = idx; 2746 } else if (sh < -64) 2747 sh = 0xff - (start - idx); 2748 else if (sh < 0) { 2749 sh = start - idx; 2750 start = idx; 2751 bitmap = bitmap << sh; 2752 sh = 0; 2753 } 2754 bitmap |= 1ULL << sh; 2755 D_TX_REPLY("start=%d bitmap=0x%llx\n", start, 2756 (unsigned long long)bitmap); 2757 } 2758 2759 agg->bitmap = bitmap; 2760 agg->start_idx = start; 2761 D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n", 2762 agg->frame_count, agg->start_idx, 2763 (unsigned long long)agg->bitmap); 2764 2765 if (bitmap) 2766 agg->wait_for_ba = 1; 2767 } 2768 return 0; 2769 } 2770 2771 /** 2772 * il4965_hdl_tx - Handle standard (non-aggregation) Tx response 2773 */ 2774 static void 2775 il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) 2776 { 2777 struct il_rx_pkt *pkt = rxb_addr(rxb); 2778 u16 sequence = le16_to_cpu(pkt->hdr.sequence); 2779 int txq_id = SEQ_TO_QUEUE(sequence); 2780 int idx = SEQ_TO_IDX(sequence); 2781 struct il_tx_queue *txq = &il->txq[txq_id]; 2782 struct sk_buff *skb; 2783 struct ieee80211_hdr *hdr; 2784 struct ieee80211_tx_info *info; 2785 struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; 2786 u32 status = le32_to_cpu(tx_resp->u.status); 2787 int uninitialized_var(tid); 2788 int sta_id; 2789 int freed; 2790 u8 *qc = NULL; 2791 unsigned long flags; 2792 2793 if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) { 2794 IL_ERR("Read idx for DMA queue txq_id (%d) idx %d " 2795 "is out of range [0-%d] %d %d\n", txq_id, idx, 2796 txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr); 2797 return; 2798 } 2799 2800 txq->time_stamp = jiffies; 2801 2802 skb = txq->skbs[txq->q.read_ptr]; 2803 info = IEEE80211_SKB_CB(skb); 2804 memset(&info->status, 0, sizeof(info->status)); 2805 2806 hdr = (struct ieee80211_hdr *) skb->data; 2807 if (ieee80211_is_data_qos(hdr->frame_control)) { 2808 qc = ieee80211_get_qos_ctl(hdr); 2809 tid = qc[0] & 0xf; 2810 } 2811 2812 sta_id = il4965_get_ra_sta_id(il, hdr); 2813 if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) { 2814 IL_ERR("Station not known\n"); 2815 return; 2816 } 2817 2818 /* 2819 * Firmware will not transmit frame on passive channel, if it not yet 2820 * received some valid frame on that channel. When this error happen 2821 * we have to wait until firmware will unblock itself i.e. when we 2822 * note received beacon or other frame. We unblock queues in 2823 * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed. 2824 */ 2825 if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && 2826 il->iw_mode == NL80211_IFTYPE_STATION) { 2827 il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); 2828 D_INFO("Stopped queues - RX waiting on passive channel\n"); 2829 } 2830 2831 spin_lock_irqsave(&il->sta_lock, flags); 2832 if (txq->sched_retry) { 2833 const u32 scd_ssn = il4965_get_scd_ssn(tx_resp); 2834 struct il_ht_agg *agg = NULL; 2835 WARN_ON(!qc); 2836 2837 agg = &il->stations[sta_id].tid[tid].agg; 2838 2839 il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx); 2840 2841 /* check if BAR is needed */ 2842 if (tx_resp->frame_count == 1 && 2843 !il4965_is_tx_success(status)) 2844 info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; 2845 2846 if (txq->q.read_ptr != (scd_ssn & 0xff)) { 2847 idx = il_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); 2848 D_TX_REPLY("Retry scheduler reclaim scd_ssn " 2849 "%d idx %d\n", scd_ssn, idx); 2850 freed = il4965_tx_queue_reclaim(il, txq_id, idx); 2851 if (qc) 2852 il4965_free_tfds_in_queue(il, sta_id, tid, 2853 freed); 2854 2855 if (il->mac80211_registered && 2856 il_queue_space(&txq->q) > txq->q.low_mark && 2857 agg->state != IL_EMPTYING_HW_QUEUE_DELBA) 2858 il_wake_queue(il, txq); 2859 } 2860 } else { 2861 info->status.rates[0].count = tx_resp->failure_frame + 1; 2862 info->flags |= il4965_tx_status_to_mac80211(status); 2863 il4965_hwrate_to_tx_control(il, 2864 le32_to_cpu(tx_resp->rate_n_flags), 2865 info); 2866 2867 D_TX_REPLY("TXQ %d status %s (0x%08x) " 2868 "rate_n_flags 0x%x retries %d\n", txq_id, 2869 il4965_get_tx_fail_reason(status), status, 2870 le32_to_cpu(tx_resp->rate_n_flags), 2871 tx_resp->failure_frame); 2872 2873 freed = il4965_tx_queue_reclaim(il, txq_id, idx); 2874 if (qc && likely(sta_id != IL_INVALID_STATION)) 2875 il4965_free_tfds_in_queue(il, sta_id, tid, freed); 2876 else if (sta_id == IL_INVALID_STATION) 2877 D_TX_REPLY("Station not known\n"); 2878 2879 if (il->mac80211_registered && 2880 il_queue_space(&txq->q) > txq->q.low_mark) 2881 il_wake_queue(il, txq); 2882 } 2883 if (qc && likely(sta_id != IL_INVALID_STATION)) 2884 il4965_txq_check_empty(il, sta_id, tid, txq_id); 2885 2886 il4965_check_abort_status(il, tx_resp->frame_count, status); 2887 2888 spin_unlock_irqrestore(&il->sta_lock, flags); 2889 } 2890 2891 /** 2892 * translate ucode response to mac80211 tx status control values 2893 */ 2894 void 2895 il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags, 2896 struct ieee80211_tx_info *info) 2897 { 2898 struct ieee80211_tx_rate *r = &info->status.rates[0]; 2899 2900 info->status.antenna = 2901 ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); 2902 if (rate_n_flags & RATE_MCS_HT_MSK) 2903 r->flags |= IEEE80211_TX_RC_MCS; 2904 if (rate_n_flags & RATE_MCS_GF_MSK) 2905 r->flags |= IEEE80211_TX_RC_GREEN_FIELD; 2906 if (rate_n_flags & RATE_MCS_HT40_MSK) 2907 r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; 2908 if (rate_n_flags & RATE_MCS_DUP_MSK) 2909 r->flags |= IEEE80211_TX_RC_DUP_DATA; 2910 if (rate_n_flags & RATE_MCS_SGI_MSK) 2911 r->flags |= IEEE80211_TX_RC_SHORT_GI; 2912 r->idx = il4965_hwrate_to_mac80211_idx(rate_n_flags, info->band); 2913 } 2914 2915 /** 2916 * il4965_hdl_compressed_ba - Handler for N_COMPRESSED_BA 2917 * 2918 * Handles block-acknowledge notification from device, which reports success 2919 * of frames sent via aggregation. 2920 */ 2921 static void 2922 il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb) 2923 { 2924 struct il_rx_pkt *pkt = rxb_addr(rxb); 2925 struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba; 2926 struct il_tx_queue *txq = NULL; 2927 struct il_ht_agg *agg; 2928 int idx; 2929 int sta_id; 2930 int tid; 2931 unsigned long flags; 2932 2933 /* "flow" corresponds to Tx queue */ 2934 u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); 2935 2936 /* "ssn" is start of block-ack Tx win, corresponds to idx 2937 * (in Tx queue's circular buffer) of first TFD/frame in win */ 2938 u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); 2939 2940 if (scd_flow >= il->hw_params.max_txq_num) { 2941 IL_ERR("BUG_ON scd_flow is bigger than number of queues\n"); 2942 return; 2943 } 2944 2945 txq = &il->txq[scd_flow]; 2946 sta_id = ba_resp->sta_id; 2947 tid = ba_resp->tid; 2948 agg = &il->stations[sta_id].tid[tid].agg; 2949 if (unlikely(agg->txq_id != scd_flow)) { 2950 /* 2951 * FIXME: this is a uCode bug which need to be addressed, 2952 * log the information and return for now! 2953 * since it is possible happen very often and in order 2954 * not to fill the syslog, don't enable the logging by default 2955 */ 2956 D_TX_REPLY("BA scd_flow %d does not match txq_id %d\n", 2957 scd_flow, agg->txq_id); 2958 return; 2959 } 2960 2961 /* Find idx just before block-ack win */ 2962 idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); 2963 2964 spin_lock_irqsave(&il->sta_lock, flags); 2965 2966 D_TX_REPLY("N_COMPRESSED_BA [%d] Received from %pM, " "sta_id = %d\n", 2967 agg->wait_for_ba, (u8 *) &ba_resp->sta_addr_lo32, 2968 ba_resp->sta_id); 2969 D_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx," "scd_flow = " 2970 "%d, scd_ssn = %d\n", ba_resp->tid, ba_resp->seq_ctl, 2971 (unsigned long long)le64_to_cpu(ba_resp->bitmap), 2972 ba_resp->scd_flow, ba_resp->scd_ssn); 2973 D_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx\n", agg->start_idx, 2974 (unsigned long long)agg->bitmap); 2975 2976 /* Update driver's record of ACK vs. not for each frame in win */ 2977 il4965_tx_status_reply_compressed_ba(il, agg, ba_resp); 2978 2979 /* Release all TFDs before the SSN, i.e. all TFDs in front of 2980 * block-ack win (we assume that they've been successfully 2981 * transmitted ... if not, it's too late anyway). */ 2982 if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { 2983 /* calculate mac80211 ampdu sw queue to wake */ 2984 int freed = il4965_tx_queue_reclaim(il, scd_flow, idx); 2985 il4965_free_tfds_in_queue(il, sta_id, tid, freed); 2986 2987 if (il_queue_space(&txq->q) > txq->q.low_mark && 2988 il->mac80211_registered && 2989 agg->state != IL_EMPTYING_HW_QUEUE_DELBA) 2990 il_wake_queue(il, txq); 2991 2992 il4965_txq_check_empty(il, sta_id, tid, scd_flow); 2993 } 2994 2995 spin_unlock_irqrestore(&il->sta_lock, flags); 2996 } 2997 2998 #ifdef CONFIG_IWLEGACY_DEBUG 2999 const char * 3000 il4965_get_tx_fail_reason(u32 status) 3001 { 3002 #define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x 3003 #define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x 3004 3005 switch (status & TX_STATUS_MSK) { 3006 case TX_STATUS_SUCCESS: 3007 return "SUCCESS"; 3008 TX_STATUS_POSTPONE(DELAY); 3009 TX_STATUS_POSTPONE(FEW_BYTES); 3010 TX_STATUS_POSTPONE(QUIET_PERIOD); 3011 TX_STATUS_POSTPONE(CALC_TTAK); 3012 TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY); 3013 TX_STATUS_FAIL(SHORT_LIMIT); 3014 TX_STATUS_FAIL(LONG_LIMIT); 3015 TX_STATUS_FAIL(FIFO_UNDERRUN); 3016 TX_STATUS_FAIL(DRAIN_FLOW); 3017 TX_STATUS_FAIL(RFKILL_FLUSH); 3018 TX_STATUS_FAIL(LIFE_EXPIRE); 3019 TX_STATUS_FAIL(DEST_PS); 3020 TX_STATUS_FAIL(HOST_ABORTED); 3021 TX_STATUS_FAIL(BT_RETRY); 3022 TX_STATUS_FAIL(STA_INVALID); 3023 TX_STATUS_FAIL(FRAG_DROPPED); 3024 TX_STATUS_FAIL(TID_DISABLE); 3025 TX_STATUS_FAIL(FIFO_FLUSHED); 3026 TX_STATUS_FAIL(INSUFFICIENT_CF_POLL); 3027 TX_STATUS_FAIL(PASSIVE_NO_RX); 3028 TX_STATUS_FAIL(NO_BEACON_ON_RADAR); 3029 } 3030 3031 return "UNKNOWN"; 3032 3033 #undef TX_STATUS_FAIL 3034 #undef TX_STATUS_POSTPONE 3035 } 3036 #endif /* CONFIG_IWLEGACY_DEBUG */ 3037 3038 static struct il_link_quality_cmd * 3039 il4965_sta_alloc_lq(struct il_priv *il, u8 sta_id) 3040 { 3041 int i, r; 3042 struct il_link_quality_cmd *link_cmd; 3043 u32 rate_flags = 0; 3044 __le32 rate_n_flags; 3045 3046 link_cmd = kzalloc(sizeof(struct il_link_quality_cmd), GFP_KERNEL); 3047 if (!link_cmd) { 3048 IL_ERR("Unable to allocate memory for LQ cmd.\n"); 3049 return NULL; 3050 } 3051 /* Set up the rate scaling to start at selected rate, fall back 3052 * all the way down to 1M in IEEE order, and then spin on 1M */ 3053 if (il->band == NL80211_BAND_5GHZ) 3054 r = RATE_6M_IDX; 3055 else 3056 r = RATE_1M_IDX; 3057 3058 if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE) 3059 rate_flags |= RATE_MCS_CCK_MSK; 3060 3061 rate_flags |= 3062 il4965_first_antenna(il->hw_params. 3063 valid_tx_ant) << RATE_MCS_ANT_POS; 3064 rate_n_flags = cpu_to_le32(il_rates[r].plcp | rate_flags); 3065 for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) 3066 link_cmd->rs_table[i].rate_n_flags = rate_n_flags; 3067 3068 link_cmd->general_params.single_stream_ant_msk = 3069 il4965_first_antenna(il->hw_params.valid_tx_ant); 3070 3071 link_cmd->general_params.dual_stream_ant_msk = 3072 il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params. 3073 valid_tx_ant); 3074 if (!link_cmd->general_params.dual_stream_ant_msk) { 3075 link_cmd->general_params.dual_stream_ant_msk = ANT_AB; 3076 } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) { 3077 link_cmd->general_params.dual_stream_ant_msk = 3078 il->hw_params.valid_tx_ant; 3079 } 3080 3081 link_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; 3082 link_cmd->agg_params.agg_time_limit = 3083 cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); 3084 3085 link_cmd->sta_id = sta_id; 3086 3087 return link_cmd; 3088 } 3089 3090 /* 3091 * il4965_add_bssid_station - Add the special IBSS BSSID station 3092 * 3093 * Function sleeps. 3094 */ 3095 int 3096 il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r) 3097 { 3098 int ret; 3099 u8 sta_id; 3100 struct il_link_quality_cmd *link_cmd; 3101 unsigned long flags; 3102 3103 if (sta_id_r) 3104 *sta_id_r = IL_INVALID_STATION; 3105 3106 ret = il_add_station_common(il, addr, 0, NULL, &sta_id); 3107 if (ret) { 3108 IL_ERR("Unable to add station %pM\n", addr); 3109 return ret; 3110 } 3111 3112 if (sta_id_r) 3113 *sta_id_r = sta_id; 3114 3115 spin_lock_irqsave(&il->sta_lock, flags); 3116 il->stations[sta_id].used |= IL_STA_LOCAL; 3117 spin_unlock_irqrestore(&il->sta_lock, flags); 3118 3119 /* Set up default rate scaling table in device's station table */ 3120 link_cmd = il4965_sta_alloc_lq(il, sta_id); 3121 if (!link_cmd) { 3122 IL_ERR("Unable to initialize rate scaling for station %pM.\n", 3123 addr); 3124 return -ENOMEM; 3125 } 3126 3127 ret = il_send_lq_cmd(il, link_cmd, CMD_SYNC, true); 3128 if (ret) 3129 IL_ERR("Link quality command failed (%d)\n", ret); 3130 3131 spin_lock_irqsave(&il->sta_lock, flags); 3132 il->stations[sta_id].lq = link_cmd; 3133 spin_unlock_irqrestore(&il->sta_lock, flags); 3134 3135 return 0; 3136 } 3137 3138 static int 3139 il4965_static_wepkey_cmd(struct il_priv *il, bool send_if_empty) 3140 { 3141 int i; 3142 u8 buff[sizeof(struct il_wep_cmd) + 3143 sizeof(struct il_wep_key) * WEP_KEYS_MAX]; 3144 struct il_wep_cmd *wep_cmd = (struct il_wep_cmd *)buff; 3145 size_t cmd_size = sizeof(struct il_wep_cmd); 3146 struct il_host_cmd cmd = { 3147 .id = C_WEPKEY, 3148 .data = wep_cmd, 3149 .flags = CMD_SYNC, 3150 }; 3151 bool not_empty = false; 3152 3153 might_sleep(); 3154 3155 memset(wep_cmd, 0, 3156 cmd_size + (sizeof(struct il_wep_key) * WEP_KEYS_MAX)); 3157 3158 for (i = 0; i < WEP_KEYS_MAX; i++) { 3159 u8 key_size = il->_4965.wep_keys[i].key_size; 3160 3161 wep_cmd->key[i].key_idx = i; 3162 if (key_size) { 3163 wep_cmd->key[i].key_offset = i; 3164 not_empty = true; 3165 } else 3166 wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET; 3167 3168 wep_cmd->key[i].key_size = key_size; 3169 memcpy(&wep_cmd->key[i].key[3], il->_4965.wep_keys[i].key, key_size); 3170 } 3171 3172 wep_cmd->global_key_type = WEP_KEY_WEP_TYPE; 3173 wep_cmd->num_keys = WEP_KEYS_MAX; 3174 3175 cmd_size += sizeof(struct il_wep_key) * WEP_KEYS_MAX; 3176 cmd.len = cmd_size; 3177 3178 if (not_empty || send_if_empty) 3179 return il_send_cmd(il, &cmd); 3180 else 3181 return 0; 3182 } 3183 3184 int 3185 il4965_restore_default_wep_keys(struct il_priv *il) 3186 { 3187 lockdep_assert_held(&il->mutex); 3188 3189 return il4965_static_wepkey_cmd(il, false); 3190 } 3191 3192 int 3193 il4965_remove_default_wep_key(struct il_priv *il, 3194 struct ieee80211_key_conf *keyconf) 3195 { 3196 int ret; 3197 int idx = keyconf->keyidx; 3198 3199 lockdep_assert_held(&il->mutex); 3200 3201 D_WEP("Removing default WEP key: idx=%d\n", idx); 3202 3203 memset(&il->_4965.wep_keys[idx], 0, sizeof(struct il_wep_key)); 3204 if (il_is_rfkill(il)) { 3205 D_WEP("Not sending C_WEPKEY command due to RFKILL.\n"); 3206 /* but keys in device are clear anyway so return success */ 3207 return 0; 3208 } 3209 ret = il4965_static_wepkey_cmd(il, 1); 3210 D_WEP("Remove default WEP key: idx=%d ret=%d\n", idx, ret); 3211 3212 return ret; 3213 } 3214 3215 int 3216 il4965_set_default_wep_key(struct il_priv *il, 3217 struct ieee80211_key_conf *keyconf) 3218 { 3219 int ret; 3220 int len = keyconf->keylen; 3221 int idx = keyconf->keyidx; 3222 3223 lockdep_assert_held(&il->mutex); 3224 3225 if (len != WEP_KEY_LEN_128 && len != WEP_KEY_LEN_64) { 3226 D_WEP("Bad WEP key length %d\n", keyconf->keylen); 3227 return -EINVAL; 3228 } 3229 3230 keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; 3231 keyconf->hw_key_idx = HW_KEY_DEFAULT; 3232 il->stations[IL_AP_ID].keyinfo.cipher = keyconf->cipher; 3233 3234 il->_4965.wep_keys[idx].key_size = len; 3235 memcpy(&il->_4965.wep_keys[idx].key, &keyconf->key, len); 3236 3237 ret = il4965_static_wepkey_cmd(il, false); 3238 3239 D_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", len, idx, ret); 3240 return ret; 3241 } 3242 3243 static int 3244 il4965_set_wep_dynamic_key_info(struct il_priv *il, 3245 struct ieee80211_key_conf *keyconf, u8 sta_id) 3246 { 3247 unsigned long flags; 3248 __le16 key_flags = 0; 3249 struct il_addsta_cmd sta_cmd; 3250 3251 lockdep_assert_held(&il->mutex); 3252 3253 keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; 3254 3255 key_flags |= (STA_KEY_FLG_WEP | STA_KEY_FLG_MAP_KEY_MSK); 3256 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); 3257 key_flags &= ~STA_KEY_FLG_INVALID; 3258 3259 if (keyconf->keylen == WEP_KEY_LEN_128) 3260 key_flags |= STA_KEY_FLG_KEY_SIZE_MSK; 3261 3262 if (sta_id == il->hw_params.bcast_id) 3263 key_flags |= STA_KEY_MULTICAST_MSK; 3264 3265 spin_lock_irqsave(&il->sta_lock, flags); 3266 3267 il->stations[sta_id].keyinfo.cipher = keyconf->cipher; 3268 il->stations[sta_id].keyinfo.keylen = keyconf->keylen; 3269 il->stations[sta_id].keyinfo.keyidx = keyconf->keyidx; 3270 3271 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); 3272 3273 memcpy(&il->stations[sta_id].sta.key.key[3], keyconf->key, 3274 keyconf->keylen); 3275 3276 if ((il->stations[sta_id].sta.key. 3277 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) 3278 il->stations[sta_id].sta.key.key_offset = 3279 il_get_free_ucode_key_idx(il); 3280 /* else, we are overriding an existing key => no need to allocated room 3281 * in uCode. */ 3282 3283 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, 3284 "no space for a new key"); 3285 3286 il->stations[sta_id].sta.key.key_flags = key_flags; 3287 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 3288 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3289 3290 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3291 sizeof(struct il_addsta_cmd)); 3292 spin_unlock_irqrestore(&il->sta_lock, flags); 3293 3294 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3295 } 3296 3297 static int 3298 il4965_set_ccmp_dynamic_key_info(struct il_priv *il, 3299 struct ieee80211_key_conf *keyconf, u8 sta_id) 3300 { 3301 unsigned long flags; 3302 __le16 key_flags = 0; 3303 struct il_addsta_cmd sta_cmd; 3304 3305 lockdep_assert_held(&il->mutex); 3306 3307 key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); 3308 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); 3309 key_flags &= ~STA_KEY_FLG_INVALID; 3310 3311 if (sta_id == il->hw_params.bcast_id) 3312 key_flags |= STA_KEY_MULTICAST_MSK; 3313 3314 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 3315 3316 spin_lock_irqsave(&il->sta_lock, flags); 3317 il->stations[sta_id].keyinfo.cipher = keyconf->cipher; 3318 il->stations[sta_id].keyinfo.keylen = keyconf->keylen; 3319 3320 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); 3321 3322 memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); 3323 3324 if ((il->stations[sta_id].sta.key. 3325 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) 3326 il->stations[sta_id].sta.key.key_offset = 3327 il_get_free_ucode_key_idx(il); 3328 /* else, we are overriding an existing key => no need to allocated room 3329 * in uCode. */ 3330 3331 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, 3332 "no space for a new key"); 3333 3334 il->stations[sta_id].sta.key.key_flags = key_flags; 3335 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 3336 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3337 3338 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3339 sizeof(struct il_addsta_cmd)); 3340 spin_unlock_irqrestore(&il->sta_lock, flags); 3341 3342 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3343 } 3344 3345 static int 3346 il4965_set_tkip_dynamic_key_info(struct il_priv *il, 3347 struct ieee80211_key_conf *keyconf, u8 sta_id) 3348 { 3349 unsigned long flags; 3350 int ret = 0; 3351 __le16 key_flags = 0; 3352 3353 key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); 3354 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); 3355 key_flags &= ~STA_KEY_FLG_INVALID; 3356 3357 if (sta_id == il->hw_params.bcast_id) 3358 key_flags |= STA_KEY_MULTICAST_MSK; 3359 3360 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 3361 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; 3362 3363 spin_lock_irqsave(&il->sta_lock, flags); 3364 3365 il->stations[sta_id].keyinfo.cipher = keyconf->cipher; 3366 il->stations[sta_id].keyinfo.keylen = 16; 3367 3368 if ((il->stations[sta_id].sta.key. 3369 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) 3370 il->stations[sta_id].sta.key.key_offset = 3371 il_get_free_ucode_key_idx(il); 3372 /* else, we are overriding an existing key => no need to allocated room 3373 * in uCode. */ 3374 3375 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, 3376 "no space for a new key"); 3377 3378 il->stations[sta_id].sta.key.key_flags = key_flags; 3379 3380 /* This copy is acutally not needed: we get the key with each TX */ 3381 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, 16); 3382 3383 memcpy(il->stations[sta_id].sta.key.key, keyconf->key, 16); 3384 3385 spin_unlock_irqrestore(&il->sta_lock, flags); 3386 3387 return ret; 3388 } 3389 3390 void 3391 il4965_update_tkip_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, 3392 struct ieee80211_sta *sta, u32 iv32, u16 *phase1key) 3393 { 3394 u8 sta_id; 3395 unsigned long flags; 3396 int i; 3397 3398 if (il_scan_cancel(il)) { 3399 /* cancel scan failed, just live w/ bad key and rely 3400 briefly on SW decryption */ 3401 return; 3402 } 3403 3404 sta_id = il_sta_id_or_broadcast(il, sta); 3405 if (sta_id == IL_INVALID_STATION) 3406 return; 3407 3408 spin_lock_irqsave(&il->sta_lock, flags); 3409 3410 il->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; 3411 3412 for (i = 0; i < 5; i++) 3413 il->stations[sta_id].sta.key.tkip_rx_ttak[i] = 3414 cpu_to_le16(phase1key[i]); 3415 3416 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 3417 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3418 3419 il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); 3420 3421 spin_unlock_irqrestore(&il->sta_lock, flags); 3422 } 3423 3424 int 3425 il4965_remove_dynamic_key(struct il_priv *il, 3426 struct ieee80211_key_conf *keyconf, u8 sta_id) 3427 { 3428 unsigned long flags; 3429 u16 key_flags; 3430 u8 keyidx; 3431 struct il_addsta_cmd sta_cmd; 3432 3433 lockdep_assert_held(&il->mutex); 3434 3435 il->_4965.key_mapping_keys--; 3436 3437 spin_lock_irqsave(&il->sta_lock, flags); 3438 key_flags = le16_to_cpu(il->stations[sta_id].sta.key.key_flags); 3439 keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3; 3440 3441 D_WEP("Remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id); 3442 3443 if (keyconf->keyidx != keyidx) { 3444 /* We need to remove a key with idx different that the one 3445 * in the uCode. This means that the key we need to remove has 3446 * been replaced by another one with different idx. 3447 * Don't do anything and return ok 3448 */ 3449 spin_unlock_irqrestore(&il->sta_lock, flags); 3450 return 0; 3451 } 3452 3453 if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) { 3454 IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx, 3455 key_flags); 3456 spin_unlock_irqrestore(&il->sta_lock, flags); 3457 return 0; 3458 } 3459 3460 if (!test_and_clear_bit 3461 (il->stations[sta_id].sta.key.key_offset, &il->ucode_key_table)) 3462 IL_ERR("idx %d not used in uCode key table.\n", 3463 il->stations[sta_id].sta.key.key_offset); 3464 memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key)); 3465 memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo)); 3466 il->stations[sta_id].sta.key.key_flags = 3467 STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; 3468 il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx; 3469 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 3470 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3471 3472 if (il_is_rfkill(il)) { 3473 D_WEP 3474 ("Not sending C_ADD_STA command because RFKILL enabled.\n"); 3475 spin_unlock_irqrestore(&il->sta_lock, flags); 3476 return 0; 3477 } 3478 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3479 sizeof(struct il_addsta_cmd)); 3480 spin_unlock_irqrestore(&il->sta_lock, flags); 3481 3482 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3483 } 3484 3485 int 3486 il4965_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, 3487 u8 sta_id) 3488 { 3489 int ret; 3490 3491 lockdep_assert_held(&il->mutex); 3492 3493 il->_4965.key_mapping_keys++; 3494 keyconf->hw_key_idx = HW_KEY_DYNAMIC; 3495 3496 switch (keyconf->cipher) { 3497 case WLAN_CIPHER_SUITE_CCMP: 3498 ret = 3499 il4965_set_ccmp_dynamic_key_info(il, keyconf, sta_id); 3500 break; 3501 case WLAN_CIPHER_SUITE_TKIP: 3502 ret = 3503 il4965_set_tkip_dynamic_key_info(il, keyconf, sta_id); 3504 break; 3505 case WLAN_CIPHER_SUITE_WEP40: 3506 case WLAN_CIPHER_SUITE_WEP104: 3507 ret = il4965_set_wep_dynamic_key_info(il, keyconf, sta_id); 3508 break; 3509 default: 3510 IL_ERR("Unknown alg: %s cipher = %x\n", __func__, 3511 keyconf->cipher); 3512 ret = -EINVAL; 3513 } 3514 3515 D_WEP("Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n", 3516 keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret); 3517 3518 return ret; 3519 } 3520 3521 /** 3522 * il4965_alloc_bcast_station - add broadcast station into driver's station table. 3523 * 3524 * This adds the broadcast station into the driver's station table 3525 * and marks it driver active, so that it will be restored to the 3526 * device at the next best time. 3527 */ 3528 int 3529 il4965_alloc_bcast_station(struct il_priv *il) 3530 { 3531 struct il_link_quality_cmd *link_cmd; 3532 unsigned long flags; 3533 u8 sta_id; 3534 3535 spin_lock_irqsave(&il->sta_lock, flags); 3536 sta_id = il_prep_station(il, il_bcast_addr, false, NULL); 3537 if (sta_id == IL_INVALID_STATION) { 3538 IL_ERR("Unable to prepare broadcast station\n"); 3539 spin_unlock_irqrestore(&il->sta_lock, flags); 3540 3541 return -EINVAL; 3542 } 3543 3544 il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE; 3545 il->stations[sta_id].used |= IL_STA_BCAST; 3546 spin_unlock_irqrestore(&il->sta_lock, flags); 3547 3548 link_cmd = il4965_sta_alloc_lq(il, sta_id); 3549 if (!link_cmd) { 3550 IL_ERR 3551 ("Unable to initialize rate scaling for bcast station.\n"); 3552 return -ENOMEM; 3553 } 3554 3555 spin_lock_irqsave(&il->sta_lock, flags); 3556 il->stations[sta_id].lq = link_cmd; 3557 spin_unlock_irqrestore(&il->sta_lock, flags); 3558 3559 return 0; 3560 } 3561 3562 /** 3563 * il4965_update_bcast_station - update broadcast station's LQ command 3564 * 3565 * Only used by iwl4965. Placed here to have all bcast station management 3566 * code together. 3567 */ 3568 static int 3569 il4965_update_bcast_station(struct il_priv *il) 3570 { 3571 unsigned long flags; 3572 struct il_link_quality_cmd *link_cmd; 3573 u8 sta_id = il->hw_params.bcast_id; 3574 3575 link_cmd = il4965_sta_alloc_lq(il, sta_id); 3576 if (!link_cmd) { 3577 IL_ERR("Unable to initialize rate scaling for bcast sta.\n"); 3578 return -ENOMEM; 3579 } 3580 3581 spin_lock_irqsave(&il->sta_lock, flags); 3582 if (il->stations[sta_id].lq) 3583 kfree(il->stations[sta_id].lq); 3584 else 3585 D_INFO("Bcast sta rate scaling has not been initialized.\n"); 3586 il->stations[sta_id].lq = link_cmd; 3587 spin_unlock_irqrestore(&il->sta_lock, flags); 3588 3589 return 0; 3590 } 3591 3592 int 3593 il4965_update_bcast_stations(struct il_priv *il) 3594 { 3595 return il4965_update_bcast_station(il); 3596 } 3597 3598 /** 3599 * il4965_sta_tx_modify_enable_tid - Enable Tx for this TID in station table 3600 */ 3601 int 3602 il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid) 3603 { 3604 unsigned long flags; 3605 struct il_addsta_cmd sta_cmd; 3606 3607 lockdep_assert_held(&il->mutex); 3608 3609 /* Remove "disable" flag, to enable Tx for this TID */ 3610 spin_lock_irqsave(&il->sta_lock, flags); 3611 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; 3612 il->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); 3613 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3614 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3615 sizeof(struct il_addsta_cmd)); 3616 spin_unlock_irqrestore(&il->sta_lock, flags); 3617 3618 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3619 } 3620 3621 int 3622 il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, int tid, 3623 u16 ssn) 3624 { 3625 unsigned long flags; 3626 int sta_id; 3627 struct il_addsta_cmd sta_cmd; 3628 3629 lockdep_assert_held(&il->mutex); 3630 3631 sta_id = il_sta_id(sta); 3632 if (sta_id == IL_INVALID_STATION) 3633 return -ENXIO; 3634 3635 spin_lock_irqsave(&il->sta_lock, flags); 3636 il->stations[sta_id].sta.station_flags_msk = 0; 3637 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; 3638 il->stations[sta_id].sta.add_immediate_ba_tid = (u8) tid; 3639 il->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); 3640 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3641 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3642 sizeof(struct il_addsta_cmd)); 3643 spin_unlock_irqrestore(&il->sta_lock, flags); 3644 3645 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3646 } 3647 3648 int 3649 il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, int tid) 3650 { 3651 unsigned long flags; 3652 int sta_id; 3653 struct il_addsta_cmd sta_cmd; 3654 3655 lockdep_assert_held(&il->mutex); 3656 3657 sta_id = il_sta_id(sta); 3658 if (sta_id == IL_INVALID_STATION) { 3659 IL_ERR("Invalid station for AGG tid %d\n", tid); 3660 return -ENXIO; 3661 } 3662 3663 spin_lock_irqsave(&il->sta_lock, flags); 3664 il->stations[sta_id].sta.station_flags_msk = 0; 3665 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; 3666 il->stations[sta_id].sta.remove_immediate_ba_tid = (u8) tid; 3667 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3668 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3669 sizeof(struct il_addsta_cmd)); 3670 spin_unlock_irqrestore(&il->sta_lock, flags); 3671 3672 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3673 } 3674 3675 void 3676 il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt) 3677 { 3678 unsigned long flags; 3679 3680 spin_lock_irqsave(&il->sta_lock, flags); 3681 il->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK; 3682 il->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; 3683 il->stations[sta_id].sta.sta.modify_mask = 3684 STA_MODIFY_SLEEP_TX_COUNT_MSK; 3685 il->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt); 3686 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3687 il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); 3688 spin_unlock_irqrestore(&il->sta_lock, flags); 3689 3690 } 3691 3692 void 3693 il4965_update_chain_flags(struct il_priv *il) 3694 { 3695 if (il->ops->set_rxon_chain) { 3696 il->ops->set_rxon_chain(il); 3697 if (il->active.rx_chain != il->staging.rx_chain) 3698 il_commit_rxon(il); 3699 } 3700 } 3701 3702 static void 3703 il4965_clear_free_frames(struct il_priv *il) 3704 { 3705 struct list_head *element; 3706 3707 D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count); 3708 3709 while (!list_empty(&il->free_frames)) { 3710 element = il->free_frames.next; 3711 list_del(element); 3712 kfree(list_entry(element, struct il_frame, list)); 3713 il->frames_count--; 3714 } 3715 3716 if (il->frames_count) { 3717 IL_WARN("%d frames still in use. Did we lose one?\n", 3718 il->frames_count); 3719 il->frames_count = 0; 3720 } 3721 } 3722 3723 static struct il_frame * 3724 il4965_get_free_frame(struct il_priv *il) 3725 { 3726 struct il_frame *frame; 3727 struct list_head *element; 3728 if (list_empty(&il->free_frames)) { 3729 frame = kzalloc(sizeof(*frame), GFP_KERNEL); 3730 if (!frame) { 3731 IL_ERR("Could not allocate frame!\n"); 3732 return NULL; 3733 } 3734 3735 il->frames_count++; 3736 return frame; 3737 } 3738 3739 element = il->free_frames.next; 3740 list_del(element); 3741 return list_entry(element, struct il_frame, list); 3742 } 3743 3744 static void 3745 il4965_free_frame(struct il_priv *il, struct il_frame *frame) 3746 { 3747 memset(frame, 0, sizeof(*frame)); 3748 list_add(&frame->list, &il->free_frames); 3749 } 3750 3751 static u32 3752 il4965_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr, 3753 int left) 3754 { 3755 lockdep_assert_held(&il->mutex); 3756 3757 if (!il->beacon_skb) 3758 return 0; 3759 3760 if (il->beacon_skb->len > left) 3761 return 0; 3762 3763 memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len); 3764 3765 return il->beacon_skb->len; 3766 } 3767 3768 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ 3769 static void 3770 il4965_set_beacon_tim(struct il_priv *il, 3771 struct il_tx_beacon_cmd *tx_beacon_cmd, u8 * beacon, 3772 u32 frame_size) 3773 { 3774 u16 tim_idx; 3775 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; 3776 3777 /* 3778 * The idx is relative to frame start but we start looking at the 3779 * variable-length part of the beacon. 3780 */ 3781 tim_idx = mgmt->u.beacon.variable - beacon; 3782 3783 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ 3784 while ((tim_idx < (frame_size - 2)) && 3785 (beacon[tim_idx] != WLAN_EID_TIM)) 3786 tim_idx += beacon[tim_idx + 1] + 2; 3787 3788 /* If TIM field was found, set variables */ 3789 if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { 3790 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); 3791 tx_beacon_cmd->tim_size = beacon[tim_idx + 1]; 3792 } else 3793 IL_WARN("Unable to find TIM Element in beacon\n"); 3794 } 3795 3796 static unsigned int 3797 il4965_hw_get_beacon_cmd(struct il_priv *il, struct il_frame *frame) 3798 { 3799 struct il_tx_beacon_cmd *tx_beacon_cmd; 3800 u32 frame_size; 3801 u32 rate_flags; 3802 u32 rate; 3803 /* 3804 * We have to set up the TX command, the TX Beacon command, and the 3805 * beacon contents. 3806 */ 3807 3808 lockdep_assert_held(&il->mutex); 3809 3810 if (!il->beacon_enabled) { 3811 IL_ERR("Trying to build beacon without beaconing enabled\n"); 3812 return 0; 3813 } 3814 3815 /* Initialize memory */ 3816 tx_beacon_cmd = &frame->u.beacon; 3817 memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); 3818 3819 /* Set up TX beacon contents */ 3820 frame_size = 3821 il4965_fill_beacon_frame(il, tx_beacon_cmd->frame, 3822 sizeof(frame->u) - sizeof(*tx_beacon_cmd)); 3823 if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE)) 3824 return 0; 3825 if (!frame_size) 3826 return 0; 3827 3828 /* Set up TX command fields */ 3829 tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size); 3830 tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id; 3831 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 3832 tx_beacon_cmd->tx.tx_flags = 3833 TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK | 3834 TX_CMD_FLG_STA_RATE_MSK; 3835 3836 /* Set up TX beacon command fields */ 3837 il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *) tx_beacon_cmd->frame, 3838 frame_size); 3839 3840 /* Set up packet rate and flags */ 3841 rate = il_get_lowest_plcp(il); 3842 il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); 3843 rate_flags = BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; 3844 if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE)) 3845 rate_flags |= RATE_MCS_CCK_MSK; 3846 tx_beacon_cmd->tx.rate_n_flags = cpu_to_le32(rate | rate_flags); 3847 3848 return sizeof(*tx_beacon_cmd) + frame_size; 3849 } 3850 3851 int 3852 il4965_send_beacon_cmd(struct il_priv *il) 3853 { 3854 struct il_frame *frame; 3855 unsigned int frame_size; 3856 int rc; 3857 3858 frame = il4965_get_free_frame(il); 3859 if (!frame) { 3860 IL_ERR("Could not obtain free frame buffer for beacon " 3861 "command.\n"); 3862 return -ENOMEM; 3863 } 3864 3865 frame_size = il4965_hw_get_beacon_cmd(il, frame); 3866 if (!frame_size) { 3867 IL_ERR("Error configuring the beacon command\n"); 3868 il4965_free_frame(il, frame); 3869 return -EINVAL; 3870 } 3871 3872 rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]); 3873 3874 il4965_free_frame(il, frame); 3875 3876 return rc; 3877 } 3878 3879 static inline dma_addr_t 3880 il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx) 3881 { 3882 struct il_tfd_tb *tb = &tfd->tbs[idx]; 3883 3884 dma_addr_t addr = get_unaligned_le32(&tb->lo); 3885 if (sizeof(dma_addr_t) > sizeof(u32)) 3886 addr |= 3887 ((dma_addr_t) (le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 3888 16; 3889 3890 return addr; 3891 } 3892 3893 static inline u16 3894 il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx) 3895 { 3896 struct il_tfd_tb *tb = &tfd->tbs[idx]; 3897 3898 return le16_to_cpu(tb->hi_n_len) >> 4; 3899 } 3900 3901 static inline void 3902 il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx, dma_addr_t addr, u16 len) 3903 { 3904 struct il_tfd_tb *tb = &tfd->tbs[idx]; 3905 u16 hi_n_len = len << 4; 3906 3907 put_unaligned_le32(addr, &tb->lo); 3908 if (sizeof(dma_addr_t) > sizeof(u32)) 3909 hi_n_len |= ((addr >> 16) >> 16) & 0xF; 3910 3911 tb->hi_n_len = cpu_to_le16(hi_n_len); 3912 3913 tfd->num_tbs = idx + 1; 3914 } 3915 3916 static inline u8 3917 il4965_tfd_get_num_tbs(struct il_tfd *tfd) 3918 { 3919 return tfd->num_tbs & 0x1f; 3920 } 3921 3922 /** 3923 * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] 3924 * @il - driver ilate data 3925 * @txq - tx queue 3926 * 3927 * Does NOT advance any TFD circular buffer read/write idxes 3928 * Does NOT free the TFD itself (which is within circular buffer) 3929 */ 3930 void 3931 il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq) 3932 { 3933 struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds; 3934 struct il_tfd *tfd; 3935 struct pci_dev *dev = il->pci_dev; 3936 int idx = txq->q.read_ptr; 3937 int i; 3938 int num_tbs; 3939 3940 tfd = &tfd_tmp[idx]; 3941 3942 /* Sanity check on number of chunks */ 3943 num_tbs = il4965_tfd_get_num_tbs(tfd); 3944 3945 if (num_tbs >= IL_NUM_OF_TBS) { 3946 IL_ERR("Too many chunks: %i\n", num_tbs); 3947 /* @todo issue fatal error, it is quite serious situation */ 3948 return; 3949 } 3950 3951 /* Unmap tx_cmd */ 3952 if (num_tbs) 3953 pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping), 3954 dma_unmap_len(&txq->meta[idx], len), 3955 PCI_DMA_BIDIRECTIONAL); 3956 3957 /* Unmap chunks, if any. */ 3958 for (i = 1; i < num_tbs; i++) 3959 pci_unmap_single(dev, il4965_tfd_tb_get_addr(tfd, i), 3960 il4965_tfd_tb_get_len(tfd, i), 3961 PCI_DMA_TODEVICE); 3962 3963 /* free SKB */ 3964 if (txq->skbs) { 3965 struct sk_buff *skb = txq->skbs[txq->q.read_ptr]; 3966 3967 /* can be called from irqs-disabled context */ 3968 if (skb) { 3969 dev_kfree_skb_any(skb); 3970 txq->skbs[txq->q.read_ptr] = NULL; 3971 } 3972 } 3973 } 3974 3975 int 3976 il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, 3977 dma_addr_t addr, u16 len, u8 reset, u8 pad) 3978 { 3979 struct il_queue *q; 3980 struct il_tfd *tfd, *tfd_tmp; 3981 u32 num_tbs; 3982 3983 q = &txq->q; 3984 tfd_tmp = (struct il_tfd *)txq->tfds; 3985 tfd = &tfd_tmp[q->write_ptr]; 3986 3987 if (reset) 3988 memset(tfd, 0, sizeof(*tfd)); 3989 3990 num_tbs = il4965_tfd_get_num_tbs(tfd); 3991 3992 /* Each TFD can point to a maximum 20 Tx buffers */ 3993 if (num_tbs >= IL_NUM_OF_TBS) { 3994 IL_ERR("Error can not send more than %d chunks\n", 3995 IL_NUM_OF_TBS); 3996 return -EINVAL; 3997 } 3998 3999 BUG_ON(addr & ~DMA_BIT_MASK(36)); 4000 if (unlikely(addr & ~IL_TX_DMA_MASK)) 4001 IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr); 4002 4003 il4965_tfd_set_tb(tfd, num_tbs, addr, len); 4004 4005 return 0; 4006 } 4007 4008 /* 4009 * Tell nic where to find circular buffer of Tx Frame Descriptors for 4010 * given Tx queue, and enable the DMA channel used for that queue. 4011 * 4012 * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA 4013 * channels supported in hardware. 4014 */ 4015 int 4016 il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq) 4017 { 4018 int txq_id = txq->q.id; 4019 4020 /* Circular buffer (TFD queue in DRAM) physical base address */ 4021 il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8); 4022 4023 return 0; 4024 } 4025 4026 /****************************************************************************** 4027 * 4028 * Generic RX handler implementations 4029 * 4030 ******************************************************************************/ 4031 static void 4032 il4965_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb) 4033 { 4034 struct il_rx_pkt *pkt = rxb_addr(rxb); 4035 struct il_alive_resp *palive; 4036 struct delayed_work *pwork; 4037 4038 palive = &pkt->u.alive_frame; 4039 4040 D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n", 4041 palive->is_valid, palive->ver_type, palive->ver_subtype); 4042 4043 if (palive->ver_subtype == INITIALIZE_SUBTYPE) { 4044 D_INFO("Initialization Alive received.\n"); 4045 memcpy(&il->card_alive_init, &pkt->u.alive_frame, 4046 sizeof(struct il_init_alive_resp)); 4047 pwork = &il->init_alive_start; 4048 } else { 4049 D_INFO("Runtime Alive received.\n"); 4050 memcpy(&il->card_alive, &pkt->u.alive_frame, 4051 sizeof(struct il_alive_resp)); 4052 pwork = &il->alive_start; 4053 } 4054 4055 /* We delay the ALIVE response by 5ms to 4056 * give the HW RF Kill time to activate... */ 4057 if (palive->is_valid == UCODE_VALID_OK) 4058 queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5)); 4059 else 4060 IL_WARN("uCode did not respond OK.\n"); 4061 } 4062 4063 /** 4064 * il4965_bg_stats_periodic - Timer callback to queue stats 4065 * 4066 * This callback is provided in order to send a stats request. 4067 * 4068 * This timer function is continually reset to execute within 4069 * 60 seconds since the last N_STATS was received. We need to 4070 * ensure we receive the stats in order to update the temperature 4071 * used for calibrating the TXPOWER. 4072 */ 4073 static void 4074 il4965_bg_stats_periodic(struct timer_list *t) 4075 { 4076 struct il_priv *il = from_timer(il, t, stats_periodic); 4077 4078 if (test_bit(S_EXIT_PENDING, &il->status)) 4079 return; 4080 4081 /* dont send host command if rf-kill is on */ 4082 if (!il_is_ready_rf(il)) 4083 return; 4084 4085 il_send_stats_request(il, CMD_ASYNC, false); 4086 } 4087 4088 static void 4089 il4965_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb) 4090 { 4091 struct il_rx_pkt *pkt = rxb_addr(rxb); 4092 struct il4965_beacon_notif *beacon = 4093 (struct il4965_beacon_notif *)pkt->u.raw; 4094 #ifdef CONFIG_IWLEGACY_DEBUG 4095 u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); 4096 4097 D_RX("beacon status %x retries %d iss %d tsf:0x%.8x%.8x rate %d\n", 4098 le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, 4099 beacon->beacon_notify_hdr.failure_frame, 4100 le32_to_cpu(beacon->ibss_mgr_status), 4101 le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate); 4102 #endif 4103 il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); 4104 } 4105 4106 static void 4107 il4965_perform_ct_kill_task(struct il_priv *il) 4108 { 4109 unsigned long flags; 4110 4111 D_POWER("Stop all queues\n"); 4112 4113 if (il->mac80211_registered) 4114 ieee80211_stop_queues(il->hw); 4115 4116 _il_wr(il, CSR_UCODE_DRV_GP1_SET, 4117 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); 4118 _il_rd(il, CSR_UCODE_DRV_GP1); 4119 4120 spin_lock_irqsave(&il->reg_lock, flags); 4121 if (likely(_il_grab_nic_access(il))) 4122 _il_release_nic_access(il); 4123 spin_unlock_irqrestore(&il->reg_lock, flags); 4124 } 4125 4126 /* Handle notification from uCode that card's power state is changing 4127 * due to software, hardware, or critical temperature RFKILL */ 4128 static void 4129 il4965_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb) 4130 { 4131 struct il_rx_pkt *pkt = rxb_addr(rxb); 4132 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); 4133 unsigned long status = il->status; 4134 4135 D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n", 4136 (flags & HW_CARD_DISABLED) ? "Kill" : "On", 4137 (flags & SW_CARD_DISABLED) ? "Kill" : "On", 4138 (flags & CT_CARD_DISABLED) ? "Reached" : "Not reached"); 4139 4140 if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | CT_CARD_DISABLED)) { 4141 4142 _il_wr(il, CSR_UCODE_DRV_GP1_SET, 4143 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 4144 4145 il_wr(il, HBUS_TARG_MBX_C, HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); 4146 4147 if (!(flags & RXON_CARD_DISABLED)) { 4148 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, 4149 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 4150 il_wr(il, HBUS_TARG_MBX_C, 4151 HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); 4152 } 4153 } 4154 4155 if (flags & CT_CARD_DISABLED) 4156 il4965_perform_ct_kill_task(il); 4157 4158 if (flags & HW_CARD_DISABLED) 4159 set_bit(S_RFKILL, &il->status); 4160 else 4161 clear_bit(S_RFKILL, &il->status); 4162 4163 if (!(flags & RXON_CARD_DISABLED)) 4164 il_scan_cancel(il); 4165 4166 if ((test_bit(S_RFKILL, &status) != 4167 test_bit(S_RFKILL, &il->status))) 4168 wiphy_rfkill_set_hw_state(il->hw->wiphy, 4169 test_bit(S_RFKILL, &il->status)); 4170 else 4171 wake_up(&il->wait_command_queue); 4172 } 4173 4174 /** 4175 * il4965_setup_handlers - Initialize Rx handler callbacks 4176 * 4177 * Setup the RX handlers for each of the reply types sent from the uCode 4178 * to the host. 4179 * 4180 * This function chains into the hardware specific files for them to setup 4181 * any hardware specific handlers as well. 4182 */ 4183 static void 4184 il4965_setup_handlers(struct il_priv *il) 4185 { 4186 il->handlers[N_ALIVE] = il4965_hdl_alive; 4187 il->handlers[N_ERROR] = il_hdl_error; 4188 il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa; 4189 il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement; 4190 il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep; 4191 il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats; 4192 il->handlers[N_BEACON] = il4965_hdl_beacon; 4193 4194 /* 4195 * The same handler is used for both the REPLY to a discrete 4196 * stats request from the host as well as for the periodic 4197 * stats notifications (after received beacons) from the uCode. 4198 */ 4199 il->handlers[C_STATS] = il4965_hdl_c_stats; 4200 il->handlers[N_STATS] = il4965_hdl_stats; 4201 4202 il_setup_rx_scan_handlers(il); 4203 4204 /* status change handler */ 4205 il->handlers[N_CARD_STATE] = il4965_hdl_card_state; 4206 4207 il->handlers[N_MISSED_BEACONS] = il4965_hdl_missed_beacon; 4208 /* Rx handlers */ 4209 il->handlers[N_RX_PHY] = il4965_hdl_rx_phy; 4210 il->handlers[N_RX_MPDU] = il4965_hdl_rx; 4211 il->handlers[N_RX] = il4965_hdl_rx; 4212 /* block ack */ 4213 il->handlers[N_COMPRESSED_BA] = il4965_hdl_compressed_ba; 4214 /* Tx response */ 4215 il->handlers[C_TX] = il4965_hdl_tx; 4216 } 4217 4218 /** 4219 * il4965_rx_handle - Main entry function for receiving responses from uCode 4220 * 4221 * Uses the il->handlers callback function array to invoke 4222 * the appropriate handlers, including command responses, 4223 * frame-received notifications, and other notifications. 4224 */ 4225 void 4226 il4965_rx_handle(struct il_priv *il) 4227 { 4228 struct il_rx_buf *rxb; 4229 struct il_rx_pkt *pkt; 4230 struct il_rx_queue *rxq = &il->rxq; 4231 u32 r, i; 4232 int reclaim; 4233 unsigned long flags; 4234 u8 fill_rx = 0; 4235 u32 count = 8; 4236 int total_empty; 4237 4238 /* uCode's read idx (stored in shared DRAM) indicates the last Rx 4239 * buffer that the driver may process (last buffer filled by ucode). */ 4240 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; 4241 i = rxq->read; 4242 4243 /* Rx interrupt, but nothing sent from uCode */ 4244 if (i == r) 4245 D_RX("r = %d, i = %d\n", r, i); 4246 4247 /* calculate total frames need to be restock after handling RX */ 4248 total_empty = r - rxq->write_actual; 4249 if (total_empty < 0) 4250 total_empty += RX_QUEUE_SIZE; 4251 4252 if (total_empty > (RX_QUEUE_SIZE / 2)) 4253 fill_rx = 1; 4254 4255 while (i != r) { 4256 int len; 4257 4258 rxb = rxq->queue[i]; 4259 4260 /* If an RXB doesn't have a Rx queue slot associated with it, 4261 * then a bug has been introduced in the queue refilling 4262 * routines -- catch it here */ 4263 BUG_ON(rxb == NULL); 4264 4265 rxq->queue[i] = NULL; 4266 4267 pci_unmap_page(il->pci_dev, rxb->page_dma, 4268 PAGE_SIZE << il->hw_params.rx_page_order, 4269 PCI_DMA_FROMDEVICE); 4270 pkt = rxb_addr(rxb); 4271 4272 len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK; 4273 len += sizeof(u32); /* account for status word */ 4274 4275 reclaim = il_need_reclaim(il, pkt); 4276 4277 /* Based on type of command response or notification, 4278 * handle those that need handling via function in 4279 * handlers table. See il4965_setup_handlers() */ 4280 if (il->handlers[pkt->hdr.cmd]) { 4281 D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i, 4282 il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); 4283 il->isr_stats.handlers[pkt->hdr.cmd]++; 4284 il->handlers[pkt->hdr.cmd] (il, rxb); 4285 } else { 4286 /* No handling needed */ 4287 D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r, 4288 i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); 4289 } 4290 4291 /* 4292 * XXX: After here, we should always check rxb->page 4293 * against NULL before touching it or its virtual 4294 * memory (pkt). Because some handler might have 4295 * already taken or freed the pages. 4296 */ 4297 4298 if (reclaim) { 4299 /* Invoke any callbacks, transfer the buffer to caller, 4300 * and fire off the (possibly) blocking il_send_cmd() 4301 * as we reclaim the driver command queue */ 4302 if (rxb->page) 4303 il_tx_cmd_complete(il, rxb); 4304 else 4305 IL_WARN("Claim null rxb?\n"); 4306 } 4307 4308 /* Reuse the page if possible. For notification packets and 4309 * SKBs that fail to Rx correctly, add them back into the 4310 * rx_free list for reuse later. */ 4311 spin_lock_irqsave(&rxq->lock, flags); 4312 if (rxb->page != NULL) { 4313 rxb->page_dma = 4314 pci_map_page(il->pci_dev, rxb->page, 0, 4315 PAGE_SIZE << il->hw_params. 4316 rx_page_order, PCI_DMA_FROMDEVICE); 4317 4318 if (unlikely(pci_dma_mapping_error(il->pci_dev, 4319 rxb->page_dma))) { 4320 __il_free_pages(il, rxb->page); 4321 rxb->page = NULL; 4322 list_add_tail(&rxb->list, &rxq->rx_used); 4323 } else { 4324 list_add_tail(&rxb->list, &rxq->rx_free); 4325 rxq->free_count++; 4326 } 4327 } else 4328 list_add_tail(&rxb->list, &rxq->rx_used); 4329 4330 spin_unlock_irqrestore(&rxq->lock, flags); 4331 4332 i = (i + 1) & RX_QUEUE_MASK; 4333 /* If there are a lot of unused frames, 4334 * restock the Rx queue so ucode wont assert. */ 4335 if (fill_rx) { 4336 count++; 4337 if (count >= 8) { 4338 rxq->read = i; 4339 il4965_rx_replenish_now(il); 4340 count = 0; 4341 } 4342 } 4343 } 4344 4345 /* Backtrack one entry */ 4346 rxq->read = i; 4347 if (fill_rx) 4348 il4965_rx_replenish_now(il); 4349 else 4350 il4965_rx_queue_restock(il); 4351 } 4352 4353 /* call this function to flush any scheduled tasklet */ 4354 static inline void 4355 il4965_synchronize_irq(struct il_priv *il) 4356 { 4357 /* wait to make sure we flush pending tasklet */ 4358 synchronize_irq(il->pci_dev->irq); 4359 tasklet_kill(&il->irq_tasklet); 4360 } 4361 4362 static void 4363 il4965_irq_tasklet(struct il_priv *il) 4364 { 4365 u32 inta, handled = 0; 4366 u32 inta_fh; 4367 unsigned long flags; 4368 u32 i; 4369 #ifdef CONFIG_IWLEGACY_DEBUG 4370 u32 inta_mask; 4371 #endif 4372 4373 spin_lock_irqsave(&il->lock, flags); 4374 4375 /* Ack/clear/reset pending uCode interrupts. 4376 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, 4377 * and will clear only when CSR_FH_INT_STATUS gets cleared. */ 4378 inta = _il_rd(il, CSR_INT); 4379 _il_wr(il, CSR_INT, inta); 4380 4381 /* Ack/clear/reset pending flow-handler (DMA) interrupts. 4382 * Any new interrupts that happen after this, either while we're 4383 * in this tasklet, or later, will show up in next ISR/tasklet. */ 4384 inta_fh = _il_rd(il, CSR_FH_INT_STATUS); 4385 _il_wr(il, CSR_FH_INT_STATUS, inta_fh); 4386 4387 #ifdef CONFIG_IWLEGACY_DEBUG 4388 if (il_get_debug_level(il) & IL_DL_ISR) { 4389 /* just for debug */ 4390 inta_mask = _il_rd(il, CSR_INT_MASK); 4391 D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, 4392 inta_mask, inta_fh); 4393 } 4394 #endif 4395 4396 spin_unlock_irqrestore(&il->lock, flags); 4397 4398 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not 4399 * atomic, make sure that inta covers all the interrupts that 4400 * we've discovered, even if FH interrupt came in just after 4401 * reading CSR_INT. */ 4402 if (inta_fh & CSR49_FH_INT_RX_MASK) 4403 inta |= CSR_INT_BIT_FH_RX; 4404 if (inta_fh & CSR49_FH_INT_TX_MASK) 4405 inta |= CSR_INT_BIT_FH_TX; 4406 4407 /* Now service all interrupt bits discovered above. */ 4408 if (inta & CSR_INT_BIT_HW_ERR) { 4409 IL_ERR("Hardware error detected. Restarting.\n"); 4410 4411 /* Tell the device to stop sending interrupts */ 4412 il_disable_interrupts(il); 4413 4414 il->isr_stats.hw++; 4415 il_irq_handle_error(il); 4416 4417 handled |= CSR_INT_BIT_HW_ERR; 4418 4419 return; 4420 } 4421 #ifdef CONFIG_IWLEGACY_DEBUG 4422 if (il_get_debug_level(il) & (IL_DL_ISR)) { 4423 /* NIC fires this, but we don't use it, redundant with WAKEUP */ 4424 if (inta & CSR_INT_BIT_SCD) { 4425 D_ISR("Scheduler finished to transmit " 4426 "the frame/frames.\n"); 4427 il->isr_stats.sch++; 4428 } 4429 4430 /* Alive notification via Rx interrupt will do the real work */ 4431 if (inta & CSR_INT_BIT_ALIVE) { 4432 D_ISR("Alive interrupt\n"); 4433 il->isr_stats.alive++; 4434 } 4435 } 4436 #endif 4437 /* Safely ignore these bits for debug checks below */ 4438 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); 4439 4440 /* HW RF KILL switch toggled */ 4441 if (inta & CSR_INT_BIT_RF_KILL) { 4442 int hw_rf_kill = 0; 4443 4444 if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) 4445 hw_rf_kill = 1; 4446 4447 IL_WARN("RF_KILL bit toggled to %s.\n", 4448 hw_rf_kill ? "disable radio" : "enable radio"); 4449 4450 il->isr_stats.rfkill++; 4451 4452 /* driver only loads ucode once setting the interface up. 4453 * the driver allows loading the ucode even if the radio 4454 * is killed. Hence update the killswitch state here. The 4455 * rfkill handler will care about restarting if needed. 4456 */ 4457 if (hw_rf_kill) { 4458 set_bit(S_RFKILL, &il->status); 4459 } else { 4460 clear_bit(S_RFKILL, &il->status); 4461 il_force_reset(il, true); 4462 } 4463 wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); 4464 4465 handled |= CSR_INT_BIT_RF_KILL; 4466 } 4467 4468 /* Chip got too hot and stopped itself */ 4469 if (inta & CSR_INT_BIT_CT_KILL) { 4470 IL_ERR("Microcode CT kill error detected.\n"); 4471 il->isr_stats.ctkill++; 4472 handled |= CSR_INT_BIT_CT_KILL; 4473 } 4474 4475 /* Error detected by uCode */ 4476 if (inta & CSR_INT_BIT_SW_ERR) { 4477 IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n", 4478 inta); 4479 il->isr_stats.sw++; 4480 il_irq_handle_error(il); 4481 handled |= CSR_INT_BIT_SW_ERR; 4482 } 4483 4484 /* 4485 * uCode wakes up after power-down sleep. 4486 * Tell device about any new tx or host commands enqueued, 4487 * and about any Rx buffers made available while asleep. 4488 */ 4489 if (inta & CSR_INT_BIT_WAKEUP) { 4490 D_ISR("Wakeup interrupt\n"); 4491 il_rx_queue_update_write_ptr(il, &il->rxq); 4492 for (i = 0; i < il->hw_params.max_txq_num; i++) 4493 il_txq_update_write_ptr(il, &il->txq[i]); 4494 il->isr_stats.wakeup++; 4495 handled |= CSR_INT_BIT_WAKEUP; 4496 } 4497 4498 /* All uCode command responses, including Tx command responses, 4499 * Rx "responses" (frame-received notification), and other 4500 * notifications from uCode come through here*/ 4501 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { 4502 il4965_rx_handle(il); 4503 il->isr_stats.rx++; 4504 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); 4505 } 4506 4507 /* This "Tx" DMA channel is used only for loading uCode */ 4508 if (inta & CSR_INT_BIT_FH_TX) { 4509 D_ISR("uCode load interrupt\n"); 4510 il->isr_stats.tx++; 4511 handled |= CSR_INT_BIT_FH_TX; 4512 /* Wake up uCode load routine, now that load is complete */ 4513 il->ucode_write_complete = 1; 4514 wake_up(&il->wait_command_queue); 4515 } 4516 4517 if (inta & ~handled) { 4518 IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled); 4519 il->isr_stats.unhandled++; 4520 } 4521 4522 if (inta & ~(il->inta_mask)) { 4523 IL_WARN("Disabled INTA bits 0x%08x were pending\n", 4524 inta & ~il->inta_mask); 4525 IL_WARN(" with FH49_INT = 0x%08x\n", inta_fh); 4526 } 4527 4528 /* Re-enable all interrupts */ 4529 /* only Re-enable if disabled by irq */ 4530 if (test_bit(S_INT_ENABLED, &il->status)) 4531 il_enable_interrupts(il); 4532 /* Re-enable RF_KILL if it occurred */ 4533 else if (handled & CSR_INT_BIT_RF_KILL) 4534 il_enable_rfkill_int(il); 4535 4536 #ifdef CONFIG_IWLEGACY_DEBUG 4537 if (il_get_debug_level(il) & (IL_DL_ISR)) { 4538 inta = _il_rd(il, CSR_INT); 4539 inta_mask = _il_rd(il, CSR_INT_MASK); 4540 inta_fh = _il_rd(il, CSR_FH_INT_STATUS); 4541 D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " 4542 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); 4543 } 4544 #endif 4545 } 4546 4547 /***************************************************************************** 4548 * 4549 * sysfs attributes 4550 * 4551 *****************************************************************************/ 4552 4553 #ifdef CONFIG_IWLEGACY_DEBUG 4554 4555 /* 4556 * The following adds a new attribute to the sysfs representation 4557 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) 4558 * used for controlling the debug level. 4559 * 4560 * See the level definitions in iwl for details. 4561 * 4562 * The debug_level being managed using sysfs below is a per device debug 4563 * level that is used instead of the global debug level if it (the per 4564 * device debug level) is set. 4565 */ 4566 static ssize_t 4567 il4965_show_debug_level(struct device *d, struct device_attribute *attr, 4568 char *buf) 4569 { 4570 struct il_priv *il = dev_get_drvdata(d); 4571 return sprintf(buf, "0x%08X\n", il_get_debug_level(il)); 4572 } 4573 4574 static ssize_t 4575 il4965_store_debug_level(struct device *d, struct device_attribute *attr, 4576 const char *buf, size_t count) 4577 { 4578 struct il_priv *il = dev_get_drvdata(d); 4579 unsigned long val; 4580 int ret; 4581 4582 ret = kstrtoul(buf, 0, &val); 4583 if (ret) 4584 IL_ERR("%s is not in hex or decimal form.\n", buf); 4585 else 4586 il->debug_level = val; 4587 4588 return strnlen(buf, count); 4589 } 4590 4591 static DEVICE_ATTR(debug_level, 0644, il4965_show_debug_level, 4592 il4965_store_debug_level); 4593 4594 #endif /* CONFIG_IWLEGACY_DEBUG */ 4595 4596 static ssize_t 4597 il4965_show_temperature(struct device *d, struct device_attribute *attr, 4598 char *buf) 4599 { 4600 struct il_priv *il = dev_get_drvdata(d); 4601 4602 if (!il_is_alive(il)) 4603 return -EAGAIN; 4604 4605 return sprintf(buf, "%d\n", il->temperature); 4606 } 4607 4608 static DEVICE_ATTR(temperature, 0444, il4965_show_temperature, NULL); 4609 4610 static ssize_t 4611 il4965_show_tx_power(struct device *d, struct device_attribute *attr, char *buf) 4612 { 4613 struct il_priv *il = dev_get_drvdata(d); 4614 4615 if (!il_is_ready_rf(il)) 4616 return sprintf(buf, "off\n"); 4617 else 4618 return sprintf(buf, "%d\n", il->tx_power_user_lmt); 4619 } 4620 4621 static ssize_t 4622 il4965_store_tx_power(struct device *d, struct device_attribute *attr, 4623 const char *buf, size_t count) 4624 { 4625 struct il_priv *il = dev_get_drvdata(d); 4626 unsigned long val; 4627 int ret; 4628 4629 ret = kstrtoul(buf, 10, &val); 4630 if (ret) 4631 IL_INFO("%s is not in decimal form.\n", buf); 4632 else { 4633 ret = il_set_tx_power(il, val, false); 4634 if (ret) 4635 IL_ERR("failed setting tx power (0x%08x).\n", ret); 4636 else 4637 ret = count; 4638 } 4639 return ret; 4640 } 4641 4642 static DEVICE_ATTR(tx_power, 0644, il4965_show_tx_power, 4643 il4965_store_tx_power); 4644 4645 static struct attribute *il_sysfs_entries[] = { 4646 &dev_attr_temperature.attr, 4647 &dev_attr_tx_power.attr, 4648 #ifdef CONFIG_IWLEGACY_DEBUG 4649 &dev_attr_debug_level.attr, 4650 #endif 4651 NULL 4652 }; 4653 4654 static const struct attribute_group il_attribute_group = { 4655 .name = NULL, /* put in device directory */ 4656 .attrs = il_sysfs_entries, 4657 }; 4658 4659 /****************************************************************************** 4660 * 4661 * uCode download functions 4662 * 4663 ******************************************************************************/ 4664 4665 static void 4666 il4965_dealloc_ucode_pci(struct il_priv *il) 4667 { 4668 il_free_fw_desc(il->pci_dev, &il->ucode_code); 4669 il_free_fw_desc(il->pci_dev, &il->ucode_data); 4670 il_free_fw_desc(il->pci_dev, &il->ucode_data_backup); 4671 il_free_fw_desc(il->pci_dev, &il->ucode_init); 4672 il_free_fw_desc(il->pci_dev, &il->ucode_init_data); 4673 il_free_fw_desc(il->pci_dev, &il->ucode_boot); 4674 } 4675 4676 static void 4677 il4965_nic_start(struct il_priv *il) 4678 { 4679 /* Remove all resets to allow NIC to operate */ 4680 _il_wr(il, CSR_RESET, 0); 4681 } 4682 4683 static void il4965_ucode_callback(const struct firmware *ucode_raw, 4684 void *context); 4685 static int il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length); 4686 4687 static int __must_check 4688 il4965_request_firmware(struct il_priv *il, bool first) 4689 { 4690 const char *name_pre = il->cfg->fw_name_pre; 4691 char tag[8]; 4692 4693 if (first) { 4694 il->fw_idx = il->cfg->ucode_api_max; 4695 sprintf(tag, "%d", il->fw_idx); 4696 } else { 4697 il->fw_idx--; 4698 sprintf(tag, "%d", il->fw_idx); 4699 } 4700 4701 if (il->fw_idx < il->cfg->ucode_api_min) { 4702 IL_ERR("no suitable firmware found!\n"); 4703 return -ENOENT; 4704 } 4705 4706 sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); 4707 4708 D_INFO("attempting to load firmware '%s'\n", il->firmware_name); 4709 4710 return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name, 4711 &il->pci_dev->dev, GFP_KERNEL, il, 4712 il4965_ucode_callback); 4713 } 4714 4715 struct il4965_firmware_pieces { 4716 const void *inst, *data, *init, *init_data, *boot; 4717 size_t inst_size, data_size, init_size, init_data_size, boot_size; 4718 }; 4719 4720 static int 4721 il4965_load_firmware(struct il_priv *il, const struct firmware *ucode_raw, 4722 struct il4965_firmware_pieces *pieces) 4723 { 4724 struct il_ucode_header *ucode = (void *)ucode_raw->data; 4725 u32 api_ver, hdr_size; 4726 const u8 *src; 4727 4728 il->ucode_ver = le32_to_cpu(ucode->ver); 4729 api_ver = IL_UCODE_API(il->ucode_ver); 4730 4731 switch (api_ver) { 4732 default: 4733 case 0: 4734 case 1: 4735 case 2: 4736 hdr_size = 24; 4737 if (ucode_raw->size < hdr_size) { 4738 IL_ERR("File size too small!\n"); 4739 return -EINVAL; 4740 } 4741 pieces->inst_size = le32_to_cpu(ucode->v1.inst_size); 4742 pieces->data_size = le32_to_cpu(ucode->v1.data_size); 4743 pieces->init_size = le32_to_cpu(ucode->v1.init_size); 4744 pieces->init_data_size = le32_to_cpu(ucode->v1.init_data_size); 4745 pieces->boot_size = le32_to_cpu(ucode->v1.boot_size); 4746 src = ucode->v1.data; 4747 break; 4748 } 4749 4750 /* Verify size of file vs. image size info in file's header */ 4751 if (ucode_raw->size != 4752 hdr_size + pieces->inst_size + pieces->data_size + 4753 pieces->init_size + pieces->init_data_size + pieces->boot_size) { 4754 4755 IL_ERR("uCode file size %d does not match expected size\n", 4756 (int)ucode_raw->size); 4757 return -EINVAL; 4758 } 4759 4760 pieces->inst = src; 4761 src += pieces->inst_size; 4762 pieces->data = src; 4763 src += pieces->data_size; 4764 pieces->init = src; 4765 src += pieces->init_size; 4766 pieces->init_data = src; 4767 src += pieces->init_data_size; 4768 pieces->boot = src; 4769 src += pieces->boot_size; 4770 4771 return 0; 4772 } 4773 4774 /** 4775 * il4965_ucode_callback - callback when firmware was loaded 4776 * 4777 * If loaded successfully, copies the firmware into buffers 4778 * for the card to fetch (via DMA). 4779 */ 4780 static void 4781 il4965_ucode_callback(const struct firmware *ucode_raw, void *context) 4782 { 4783 struct il_priv *il = context; 4784 int err; 4785 struct il4965_firmware_pieces pieces; 4786 const unsigned int api_max = il->cfg->ucode_api_max; 4787 const unsigned int api_min = il->cfg->ucode_api_min; 4788 u32 api_ver; 4789 4790 u32 max_probe_length = 200; 4791 u32 standard_phy_calibration_size = 4792 IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; 4793 4794 memset(&pieces, 0, sizeof(pieces)); 4795 4796 if (!ucode_raw) { 4797 if (il->fw_idx <= il->cfg->ucode_api_max) 4798 IL_ERR("request for firmware file '%s' failed.\n", 4799 il->firmware_name); 4800 goto try_again; 4801 } 4802 4803 D_INFO("Loaded firmware file '%s' (%zd bytes).\n", il->firmware_name, 4804 ucode_raw->size); 4805 4806 /* Make sure that we got at least the API version number */ 4807 if (ucode_raw->size < 4) { 4808 IL_ERR("File size way too small!\n"); 4809 goto try_again; 4810 } 4811 4812 /* Data from ucode file: header followed by uCode images */ 4813 err = il4965_load_firmware(il, ucode_raw, &pieces); 4814 4815 if (err) 4816 goto try_again; 4817 4818 api_ver = IL_UCODE_API(il->ucode_ver); 4819 4820 /* 4821 * api_ver should match the api version forming part of the 4822 * firmware filename ... but we don't check for that and only rely 4823 * on the API version read from firmware header from here on forward 4824 */ 4825 if (api_ver < api_min || api_ver > api_max) { 4826 IL_ERR("Driver unable to support your firmware API. " 4827 "Driver supports v%u, firmware is v%u.\n", api_max, 4828 api_ver); 4829 goto try_again; 4830 } 4831 4832 if (api_ver != api_max) 4833 IL_ERR("Firmware has old API version. Expected v%u, " 4834 "got v%u. New firmware can be obtained " 4835 "from http://www.intellinuxwireless.org.\n", api_max, 4836 api_ver); 4837 4838 IL_INFO("loaded firmware version %u.%u.%u.%u\n", 4839 IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver), 4840 IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver)); 4841 4842 snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version), 4843 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver), 4844 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver), 4845 IL_UCODE_SERIAL(il->ucode_ver)); 4846 4847 /* 4848 * For any of the failures below (before allocating pci memory) 4849 * we will try to load a version with a smaller API -- maybe the 4850 * user just got a corrupted version of the latest API. 4851 */ 4852 4853 D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver); 4854 D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size); 4855 D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size); 4856 D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size); 4857 D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size); 4858 D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size); 4859 4860 /* Verify that uCode images will fit in card's SRAM */ 4861 if (pieces.inst_size > il->hw_params.max_inst_size) { 4862 IL_ERR("uCode instr len %zd too large to fit in\n", 4863 pieces.inst_size); 4864 goto try_again; 4865 } 4866 4867 if (pieces.data_size > il->hw_params.max_data_size) { 4868 IL_ERR("uCode data len %zd too large to fit in\n", 4869 pieces.data_size); 4870 goto try_again; 4871 } 4872 4873 if (pieces.init_size > il->hw_params.max_inst_size) { 4874 IL_ERR("uCode init instr len %zd too large to fit in\n", 4875 pieces.init_size); 4876 goto try_again; 4877 } 4878 4879 if (pieces.init_data_size > il->hw_params.max_data_size) { 4880 IL_ERR("uCode init data len %zd too large to fit in\n", 4881 pieces.init_data_size); 4882 goto try_again; 4883 } 4884 4885 if (pieces.boot_size > il->hw_params.max_bsm_size) { 4886 IL_ERR("uCode boot instr len %zd too large to fit in\n", 4887 pieces.boot_size); 4888 goto try_again; 4889 } 4890 4891 /* Allocate ucode buffers for card's bus-master loading ... */ 4892 4893 /* Runtime instructions and 2 copies of data: 4894 * 1) unmodified from disk 4895 * 2) backup cache for save/restore during power-downs */ 4896 il->ucode_code.len = pieces.inst_size; 4897 il_alloc_fw_desc(il->pci_dev, &il->ucode_code); 4898 4899 il->ucode_data.len = pieces.data_size; 4900 il_alloc_fw_desc(il->pci_dev, &il->ucode_data); 4901 4902 il->ucode_data_backup.len = pieces.data_size; 4903 il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup); 4904 4905 if (!il->ucode_code.v_addr || !il->ucode_data.v_addr || 4906 !il->ucode_data_backup.v_addr) 4907 goto err_pci_alloc; 4908 4909 /* Initialization instructions and data */ 4910 if (pieces.init_size && pieces.init_data_size) { 4911 il->ucode_init.len = pieces.init_size; 4912 il_alloc_fw_desc(il->pci_dev, &il->ucode_init); 4913 4914 il->ucode_init_data.len = pieces.init_data_size; 4915 il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data); 4916 4917 if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr) 4918 goto err_pci_alloc; 4919 } 4920 4921 /* Bootstrap (instructions only, no data) */ 4922 if (pieces.boot_size) { 4923 il->ucode_boot.len = pieces.boot_size; 4924 il_alloc_fw_desc(il->pci_dev, &il->ucode_boot); 4925 4926 if (!il->ucode_boot.v_addr) 4927 goto err_pci_alloc; 4928 } 4929 4930 /* Now that we can no longer fail, copy information */ 4931 4932 il->sta_key_max_num = STA_KEY_MAX_NUM; 4933 4934 /* Copy images into buffers for card's bus-master reads ... */ 4935 4936 /* Runtime instructions (first block of data in file) */ 4937 D_INFO("Copying (but not loading) uCode instr len %zd\n", 4938 pieces.inst_size); 4939 memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size); 4940 4941 D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", 4942 il->ucode_code.v_addr, (u32) il->ucode_code.p_addr); 4943 4944 /* 4945 * Runtime data 4946 * NOTE: Copy into backup buffer will be done in il_up() 4947 */ 4948 D_INFO("Copying (but not loading) uCode data len %zd\n", 4949 pieces.data_size); 4950 memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size); 4951 memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size); 4952 4953 /* Initialization instructions */ 4954 if (pieces.init_size) { 4955 D_INFO("Copying (but not loading) init instr len %zd\n", 4956 pieces.init_size); 4957 memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size); 4958 } 4959 4960 /* Initialization data */ 4961 if (pieces.init_data_size) { 4962 D_INFO("Copying (but not loading) init data len %zd\n", 4963 pieces.init_data_size); 4964 memcpy(il->ucode_init_data.v_addr, pieces.init_data, 4965 pieces.init_data_size); 4966 } 4967 4968 /* Bootstrap instructions */ 4969 D_INFO("Copying (but not loading) boot instr len %zd\n", 4970 pieces.boot_size); 4971 memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size); 4972 4973 /* 4974 * figure out the offset of chain noise reset and gain commands 4975 * base on the size of standard phy calibration commands table size 4976 */ 4977 il->_4965.phy_calib_chain_noise_reset_cmd = 4978 standard_phy_calibration_size; 4979 il->_4965.phy_calib_chain_noise_gain_cmd = 4980 standard_phy_calibration_size + 1; 4981 4982 /************************************************** 4983 * This is still part of probe() in a sense... 4984 * 4985 * 9. Setup and register with mac80211 and debugfs 4986 **************************************************/ 4987 err = il4965_mac_setup_register(il, max_probe_length); 4988 if (err) 4989 goto out_unbind; 4990 4991 il_dbgfs_register(il, DRV_NAME); 4992 4993 err = sysfs_create_group(&il->pci_dev->dev.kobj, &il_attribute_group); 4994 if (err) { 4995 IL_ERR("failed to create sysfs device attributes\n"); 4996 goto out_unbind; 4997 } 4998 4999 /* We have our copies now, allow OS release its copies */ 5000 release_firmware(ucode_raw); 5001 complete(&il->_4965.firmware_loading_complete); 5002 return; 5003 5004 try_again: 5005 /* try next, if any */ 5006 if (il4965_request_firmware(il, false)) 5007 goto out_unbind; 5008 release_firmware(ucode_raw); 5009 return; 5010 5011 err_pci_alloc: 5012 IL_ERR("failed to allocate pci memory\n"); 5013 il4965_dealloc_ucode_pci(il); 5014 out_unbind: 5015 complete(&il->_4965.firmware_loading_complete); 5016 device_release_driver(&il->pci_dev->dev); 5017 release_firmware(ucode_raw); 5018 } 5019 5020 static const char *const desc_lookup_text[] = { 5021 "OK", 5022 "FAIL", 5023 "BAD_PARAM", 5024 "BAD_CHECKSUM", 5025 "NMI_INTERRUPT_WDG", 5026 "SYSASSERT", 5027 "FATAL_ERROR", 5028 "BAD_COMMAND", 5029 "HW_ERROR_TUNE_LOCK", 5030 "HW_ERROR_TEMPERATURE", 5031 "ILLEGAL_CHAN_FREQ", 5032 "VCC_NOT_STBL", 5033 "FH49_ERROR", 5034 "NMI_INTERRUPT_HOST", 5035 "NMI_INTERRUPT_ACTION_PT", 5036 "NMI_INTERRUPT_UNKNOWN", 5037 "UCODE_VERSION_MISMATCH", 5038 "HW_ERROR_ABS_LOCK", 5039 "HW_ERROR_CAL_LOCK_FAIL", 5040 "NMI_INTERRUPT_INST_ACTION_PT", 5041 "NMI_INTERRUPT_DATA_ACTION_PT", 5042 "NMI_TRM_HW_ER", 5043 "NMI_INTERRUPT_TRM", 5044 "NMI_INTERRUPT_BREAK_POINT", 5045 "DEBUG_0", 5046 "DEBUG_1", 5047 "DEBUG_2", 5048 "DEBUG_3", 5049 }; 5050 5051 static struct { 5052 char *name; 5053 u8 num; 5054 } advanced_lookup[] = { 5055 { 5056 "NMI_INTERRUPT_WDG", 0x34}, { 5057 "SYSASSERT", 0x35}, { 5058 "UCODE_VERSION_MISMATCH", 0x37}, { 5059 "BAD_COMMAND", 0x38}, { 5060 "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C}, { 5061 "FATAL_ERROR", 0x3D}, { 5062 "NMI_TRM_HW_ERR", 0x46}, { 5063 "NMI_INTERRUPT_TRM", 0x4C}, { 5064 "NMI_INTERRUPT_BREAK_POINT", 0x54}, { 5065 "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C}, { 5066 "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64}, { 5067 "NMI_INTERRUPT_HOST", 0x66}, { 5068 "NMI_INTERRUPT_ACTION_PT", 0x7C}, { 5069 "NMI_INTERRUPT_UNKNOWN", 0x84}, { 5070 "NMI_INTERRUPT_INST_ACTION_PT", 0x86}, { 5071 "ADVANCED_SYSASSERT", 0},}; 5072 5073 static const char * 5074 il4965_desc_lookup(u32 num) 5075 { 5076 int i; 5077 int max = ARRAY_SIZE(desc_lookup_text); 5078 5079 if (num < max) 5080 return desc_lookup_text[num]; 5081 5082 max = ARRAY_SIZE(advanced_lookup) - 1; 5083 for (i = 0; i < max; i++) { 5084 if (advanced_lookup[i].num == num) 5085 break; 5086 } 5087 return advanced_lookup[i].name; 5088 } 5089 5090 #define ERROR_START_OFFSET (1 * sizeof(u32)) 5091 #define ERROR_ELEM_SIZE (7 * sizeof(u32)) 5092 5093 void 5094 il4965_dump_nic_error_log(struct il_priv *il) 5095 { 5096 u32 data2, line; 5097 u32 desc, time, count, base, data1; 5098 u32 blink1, blink2, ilink1, ilink2; 5099 u32 pc, hcmd; 5100 5101 if (il->ucode_type == UCODE_INIT) 5102 base = le32_to_cpu(il->card_alive_init.error_event_table_ptr); 5103 else 5104 base = le32_to_cpu(il->card_alive.error_event_table_ptr); 5105 5106 if (!il->ops->is_valid_rtc_data_addr(base)) { 5107 IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n", 5108 base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT"); 5109 return; 5110 } 5111 5112 count = il_read_targ_mem(il, base); 5113 5114 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { 5115 IL_ERR("Start IWL Error Log Dump:\n"); 5116 IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count); 5117 } 5118 5119 desc = il_read_targ_mem(il, base + 1 * sizeof(u32)); 5120 il->isr_stats.err_code = desc; 5121 pc = il_read_targ_mem(il, base + 2 * sizeof(u32)); 5122 blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32)); 5123 blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32)); 5124 ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32)); 5125 ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32)); 5126 data1 = il_read_targ_mem(il, base + 7 * sizeof(u32)); 5127 data2 = il_read_targ_mem(il, base + 8 * sizeof(u32)); 5128 line = il_read_targ_mem(il, base + 9 * sizeof(u32)); 5129 time = il_read_targ_mem(il, base + 11 * sizeof(u32)); 5130 hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32)); 5131 5132 IL_ERR("Desc Time " 5133 "data1 data2 line\n"); 5134 IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n", 5135 il4965_desc_lookup(desc), desc, time, data1, data2, line); 5136 IL_ERR("pc blink1 blink2 ilink1 ilink2 hcmd\n"); 5137 IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1, 5138 blink2, ilink1, ilink2, hcmd); 5139 } 5140 5141 static void 5142 il4965_rf_kill_ct_config(struct il_priv *il) 5143 { 5144 struct il_ct_kill_config cmd; 5145 unsigned long flags; 5146 int ret = 0; 5147 5148 spin_lock_irqsave(&il->lock, flags); 5149 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, 5150 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); 5151 spin_unlock_irqrestore(&il->lock, flags); 5152 5153 cmd.critical_temperature_R = 5154 cpu_to_le32(il->hw_params.ct_kill_threshold); 5155 5156 ret = il_send_cmd_pdu(il, C_CT_KILL_CONFIG, sizeof(cmd), &cmd); 5157 if (ret) 5158 IL_ERR("C_CT_KILL_CONFIG failed\n"); 5159 else 5160 D_INFO("C_CT_KILL_CONFIG " "succeeded, " 5161 "critical temperature is %d\n", 5162 il->hw_params.ct_kill_threshold); 5163 } 5164 5165 static const s8 default_queue_to_tx_fifo[] = { 5166 IL_TX_FIFO_VO, 5167 IL_TX_FIFO_VI, 5168 IL_TX_FIFO_BE, 5169 IL_TX_FIFO_BK, 5170 IL49_CMD_FIFO_NUM, 5171 IL_TX_FIFO_UNUSED, 5172 IL_TX_FIFO_UNUSED, 5173 }; 5174 5175 #define IL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) 5176 5177 static int 5178 il4965_alive_notify(struct il_priv *il) 5179 { 5180 u32 a; 5181 unsigned long flags; 5182 int i, chan; 5183 u32 reg_val; 5184 5185 spin_lock_irqsave(&il->lock, flags); 5186 5187 /* Clear 4965's internal Tx Scheduler data base */ 5188 il->scd_base_addr = il_rd_prph(il, IL49_SCD_SRAM_BASE_ADDR); 5189 a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET; 5190 for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) 5191 il_write_targ_mem(il, a, 0); 5192 for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) 5193 il_write_targ_mem(il, a, 0); 5194 for (; 5195 a < 5196 il->scd_base_addr + 5197 IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num); 5198 a += 4) 5199 il_write_targ_mem(il, a, 0); 5200 5201 /* Tel 4965 where to find Tx byte count tables */ 5202 il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR, il->scd_bc_tbls.dma >> 10); 5203 5204 /* Enable DMA channel */ 5205 for (chan = 0; chan < FH49_TCSR_CHNL_NUM; chan++) 5206 il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(chan), 5207 FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | 5208 FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); 5209 5210 /* Update FH chicken bits */ 5211 reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG); 5212 il_wr(il, FH49_TX_CHICKEN_BITS_REG, 5213 reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); 5214 5215 /* Disable chain mode for all queues */ 5216 il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0); 5217 5218 /* Initialize each Tx queue (including the command queue) */ 5219 for (i = 0; i < il->hw_params.max_txq_num; i++) { 5220 5221 /* TFD circular buffer read/write idxes */ 5222 il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0); 5223 il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8)); 5224 5225 /* Max Tx Window size for Scheduler-ACK mode */ 5226 il_write_targ_mem(il, 5227 il->scd_base_addr + 5228 IL49_SCD_CONTEXT_QUEUE_OFFSET(i), 5229 (SCD_WIN_SIZE << 5230 IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & 5231 IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); 5232 5233 /* Frame limit */ 5234 il_write_targ_mem(il, 5235 il->scd_base_addr + 5236 IL49_SCD_CONTEXT_QUEUE_OFFSET(i) + 5237 sizeof(u32), 5238 (SCD_FRAME_LIMIT << 5239 IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & 5240 IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); 5241 5242 } 5243 il_wr_prph(il, IL49_SCD_INTERRUPT_MASK, 5244 (1 << il->hw_params.max_txq_num) - 1); 5245 5246 /* Activate all Tx DMA/FIFO channels */ 5247 il4965_txq_set_sched(il, IL_MASK(0, 6)); 5248 5249 il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0); 5250 5251 /* make sure all queue are not stopped */ 5252 memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped)); 5253 for (i = 0; i < 4; i++) 5254 atomic_set(&il->queue_stop_count[i], 0); 5255 5256 /* reset to 0 to enable all the queue first */ 5257 il->txq_ctx_active_msk = 0; 5258 /* Map each Tx/cmd queue to its corresponding fifo */ 5259 BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7); 5260 5261 for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { 5262 int ac = default_queue_to_tx_fifo[i]; 5263 5264 il_txq_ctx_activate(il, i); 5265 5266 if (ac == IL_TX_FIFO_UNUSED) 5267 continue; 5268 5269 il4965_tx_queue_set_status(il, &il->txq[i], ac, 0); 5270 } 5271 5272 spin_unlock_irqrestore(&il->lock, flags); 5273 5274 return 0; 5275 } 5276 5277 /** 5278 * il4965_alive_start - called after N_ALIVE notification received 5279 * from protocol/runtime uCode (initialization uCode's 5280 * Alive gets handled by il_init_alive_start()). 5281 */ 5282 static void 5283 il4965_alive_start(struct il_priv *il) 5284 { 5285 int ret = 0; 5286 5287 D_INFO("Runtime Alive received.\n"); 5288 5289 if (il->card_alive.is_valid != UCODE_VALID_OK) { 5290 /* We had an error bringing up the hardware, so take it 5291 * all the way back down so we can try again */ 5292 D_INFO("Alive failed.\n"); 5293 goto restart; 5294 } 5295 5296 /* Initialize uCode has loaded Runtime uCode ... verify inst image. 5297 * This is a paranoid check, because we would not have gotten the 5298 * "runtime" alive if code weren't properly loaded. */ 5299 if (il4965_verify_ucode(il)) { 5300 /* Runtime instruction load was bad; 5301 * take it all the way back down so we can try again */ 5302 D_INFO("Bad runtime uCode load.\n"); 5303 goto restart; 5304 } 5305 5306 ret = il4965_alive_notify(il); 5307 if (ret) { 5308 IL_WARN("Could not complete ALIVE transition [ntf]: %d\n", ret); 5309 goto restart; 5310 } 5311 5312 /* After the ALIVE response, we can send host commands to the uCode */ 5313 set_bit(S_ALIVE, &il->status); 5314 5315 /* Enable watchdog to monitor the driver tx queues */ 5316 il_setup_watchdog(il); 5317 5318 if (il_is_rfkill(il)) 5319 return; 5320 5321 ieee80211_wake_queues(il->hw); 5322 5323 il->active_rate = RATES_MASK; 5324 5325 il_power_update_mode(il, true); 5326 D_INFO("Updated power mode\n"); 5327 5328 if (il_is_associated(il)) { 5329 struct il_rxon_cmd *active_rxon = 5330 (struct il_rxon_cmd *)&il->active; 5331 /* apply any changes in staging */ 5332 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; 5333 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; 5334 } else { 5335 /* Initialize our rx_config data */ 5336 il_connection_init_rx_config(il); 5337 5338 if (il->ops->set_rxon_chain) 5339 il->ops->set_rxon_chain(il); 5340 } 5341 5342 /* Configure bluetooth coexistence if enabled */ 5343 il_send_bt_config(il); 5344 5345 il4965_reset_run_time_calib(il); 5346 5347 set_bit(S_READY, &il->status); 5348 5349 /* Configure the adapter for unassociated operation */ 5350 il_commit_rxon(il); 5351 5352 /* At this point, the NIC is initialized and operational */ 5353 il4965_rf_kill_ct_config(il); 5354 5355 D_INFO("ALIVE processing complete.\n"); 5356 wake_up(&il->wait_command_queue); 5357 5358 return; 5359 5360 restart: 5361 queue_work(il->workqueue, &il->restart); 5362 } 5363 5364 static void il4965_cancel_deferred_work(struct il_priv *il); 5365 5366 static void 5367 __il4965_down(struct il_priv *il) 5368 { 5369 unsigned long flags; 5370 int exit_pending; 5371 5372 D_INFO(DRV_NAME " is going down\n"); 5373 5374 il_scan_cancel_timeout(il, 200); 5375 5376 exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status); 5377 5378 /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set 5379 * to prevent rearm timer */ 5380 del_timer_sync(&il->watchdog); 5381 5382 il_clear_ucode_stations(il); 5383 5384 /* FIXME: race conditions ? */ 5385 spin_lock_irq(&il->sta_lock); 5386 /* 5387 * Remove all key information that is not stored as part 5388 * of station information since mac80211 may not have had 5389 * a chance to remove all the keys. When device is 5390 * reconfigured by mac80211 after an error all keys will 5391 * be reconfigured. 5392 */ 5393 memset(il->_4965.wep_keys, 0, sizeof(il->_4965.wep_keys)); 5394 il->_4965.key_mapping_keys = 0; 5395 spin_unlock_irq(&il->sta_lock); 5396 5397 il_dealloc_bcast_stations(il); 5398 il_clear_driver_stations(il); 5399 5400 /* Unblock any waiting calls */ 5401 wake_up_all(&il->wait_command_queue); 5402 5403 /* Wipe out the EXIT_PENDING status bit if we are not actually 5404 * exiting the module */ 5405 if (!exit_pending) 5406 clear_bit(S_EXIT_PENDING, &il->status); 5407 5408 /* stop and reset the on-board processor */ 5409 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); 5410 5411 /* tell the device to stop sending interrupts */ 5412 spin_lock_irqsave(&il->lock, flags); 5413 il_disable_interrupts(il); 5414 spin_unlock_irqrestore(&il->lock, flags); 5415 il4965_synchronize_irq(il); 5416 5417 if (il->mac80211_registered) 5418 ieee80211_stop_queues(il->hw); 5419 5420 /* If we have not previously called il_init() then 5421 * clear all bits but the RF Kill bit and return */ 5422 if (!il_is_init(il)) { 5423 il->status = 5424 test_bit(S_RFKILL, &il->status) << S_RFKILL | 5425 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | 5426 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; 5427 goto exit; 5428 } 5429 5430 /* ...otherwise clear out all the status bits but the RF Kill 5431 * bit and continue taking the NIC down. */ 5432 il->status &= 5433 test_bit(S_RFKILL, &il->status) << S_RFKILL | 5434 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | 5435 test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR | 5436 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; 5437 5438 /* 5439 * We disabled and synchronized interrupt, and priv->mutex is taken, so 5440 * here is the only thread which will program device registers, but 5441 * still have lockdep assertions, so we are taking reg_lock. 5442 */ 5443 spin_lock_irq(&il->reg_lock); 5444 /* FIXME: il_grab_nic_access if rfkill is off ? */ 5445 5446 il4965_txq_ctx_stop(il); 5447 il4965_rxq_stop(il); 5448 /* Power-down device's busmaster DMA clocks */ 5449 _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); 5450 udelay(5); 5451 /* Make sure (redundant) we've released our request to stay awake */ 5452 _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); 5453 /* Stop the device, and put it in low power state */ 5454 _il_apm_stop(il); 5455 5456 spin_unlock_irq(&il->reg_lock); 5457 5458 il4965_txq_ctx_unmap(il); 5459 exit: 5460 memset(&il->card_alive, 0, sizeof(struct il_alive_resp)); 5461 5462 dev_kfree_skb(il->beacon_skb); 5463 il->beacon_skb = NULL; 5464 5465 /* clear out any free frames */ 5466 il4965_clear_free_frames(il); 5467 } 5468 5469 static void 5470 il4965_down(struct il_priv *il) 5471 { 5472 mutex_lock(&il->mutex); 5473 __il4965_down(il); 5474 mutex_unlock(&il->mutex); 5475 5476 il4965_cancel_deferred_work(il); 5477 } 5478 5479 5480 static void 5481 il4965_set_hw_ready(struct il_priv *il) 5482 { 5483 int ret; 5484 5485 il_set_bit(il, CSR_HW_IF_CONFIG_REG, 5486 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY); 5487 5488 /* See if we got it */ 5489 ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, 5490 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, 5491 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, 5492 100); 5493 if (ret >= 0) 5494 il->hw_ready = true; 5495 5496 D_INFO("hardware %s ready\n", (il->hw_ready) ? "" : "not"); 5497 } 5498 5499 static void 5500 il4965_prepare_card_hw(struct il_priv *il) 5501 { 5502 int ret; 5503 5504 il->hw_ready = false; 5505 5506 il4965_set_hw_ready(il); 5507 if (il->hw_ready) 5508 return; 5509 5510 /* If HW is not ready, prepare the conditions to check again */ 5511 il_set_bit(il, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE); 5512 5513 ret = 5514 _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, 5515 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 5516 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000); 5517 5518 /* HW should be ready by now, check again. */ 5519 if (ret != -ETIMEDOUT) 5520 il4965_set_hw_ready(il); 5521 } 5522 5523 #define MAX_HW_RESTARTS 5 5524 5525 static int 5526 __il4965_up(struct il_priv *il) 5527 { 5528 int i; 5529 int ret; 5530 5531 if (test_bit(S_EXIT_PENDING, &il->status)) { 5532 IL_WARN("Exit pending; will not bring the NIC up\n"); 5533 return -EIO; 5534 } 5535 5536 if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) { 5537 IL_ERR("ucode not available for device bringup\n"); 5538 return -EIO; 5539 } 5540 5541 ret = il4965_alloc_bcast_station(il); 5542 if (ret) { 5543 il_dealloc_bcast_stations(il); 5544 return ret; 5545 } 5546 5547 il4965_prepare_card_hw(il); 5548 if (!il->hw_ready) { 5549 il_dealloc_bcast_stations(il); 5550 IL_ERR("HW not ready\n"); 5551 return -EIO; 5552 } 5553 5554 /* If platform's RF_KILL switch is NOT set to KILL */ 5555 if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) 5556 clear_bit(S_RFKILL, &il->status); 5557 else { 5558 set_bit(S_RFKILL, &il->status); 5559 wiphy_rfkill_set_hw_state(il->hw->wiphy, true); 5560 5561 il_dealloc_bcast_stations(il); 5562 il_enable_rfkill_int(il); 5563 IL_WARN("Radio disabled by HW RF Kill switch\n"); 5564 return 0; 5565 } 5566 5567 _il_wr(il, CSR_INT, 0xFFFFFFFF); 5568 5569 /* must be initialised before il_hw_nic_init */ 5570 il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM; 5571 5572 ret = il4965_hw_nic_init(il); 5573 if (ret) { 5574 IL_ERR("Unable to init nic\n"); 5575 il_dealloc_bcast_stations(il); 5576 return ret; 5577 } 5578 5579 /* make sure rfkill handshake bits are cleared */ 5580 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 5581 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 5582 5583 /* clear (again), then enable host interrupts */ 5584 _il_wr(il, CSR_INT, 0xFFFFFFFF); 5585 il_enable_interrupts(il); 5586 5587 /* really make sure rfkill handshake bits are cleared */ 5588 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 5589 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 5590 5591 /* Copy original ucode data image from disk into backup cache. 5592 * This will be used to initialize the on-board processor's 5593 * data SRAM for a clean start when the runtime program first loads. */ 5594 memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr, 5595 il->ucode_data.len); 5596 5597 for (i = 0; i < MAX_HW_RESTARTS; i++) { 5598 5599 /* load bootstrap state machine, 5600 * load bootstrap program into processor's memory, 5601 * prepare to load the "initialize" uCode */ 5602 ret = il->ops->load_ucode(il); 5603 5604 if (ret) { 5605 IL_ERR("Unable to set up bootstrap uCode: %d\n", ret); 5606 continue; 5607 } 5608 5609 /* start card; "initialize" will load runtime ucode */ 5610 il4965_nic_start(il); 5611 5612 D_INFO(DRV_NAME " is coming up\n"); 5613 5614 return 0; 5615 } 5616 5617 set_bit(S_EXIT_PENDING, &il->status); 5618 __il4965_down(il); 5619 clear_bit(S_EXIT_PENDING, &il->status); 5620 5621 /* tried to restart and config the device for as long as our 5622 * patience could withstand */ 5623 IL_ERR("Unable to initialize device after %d attempts.\n", i); 5624 return -EIO; 5625 } 5626 5627 /***************************************************************************** 5628 * 5629 * Workqueue callbacks 5630 * 5631 *****************************************************************************/ 5632 5633 static void 5634 il4965_bg_init_alive_start(struct work_struct *data) 5635 { 5636 struct il_priv *il = 5637 container_of(data, struct il_priv, init_alive_start.work); 5638 5639 mutex_lock(&il->mutex); 5640 if (test_bit(S_EXIT_PENDING, &il->status)) 5641 goto out; 5642 5643 il->ops->init_alive_start(il); 5644 out: 5645 mutex_unlock(&il->mutex); 5646 } 5647 5648 static void 5649 il4965_bg_alive_start(struct work_struct *data) 5650 { 5651 struct il_priv *il = 5652 container_of(data, struct il_priv, alive_start.work); 5653 5654 mutex_lock(&il->mutex); 5655 if (test_bit(S_EXIT_PENDING, &il->status)) 5656 goto out; 5657 5658 il4965_alive_start(il); 5659 out: 5660 mutex_unlock(&il->mutex); 5661 } 5662 5663 static void 5664 il4965_bg_run_time_calib_work(struct work_struct *work) 5665 { 5666 struct il_priv *il = container_of(work, struct il_priv, 5667 run_time_calib_work); 5668 5669 mutex_lock(&il->mutex); 5670 5671 if (test_bit(S_EXIT_PENDING, &il->status) || 5672 test_bit(S_SCANNING, &il->status)) { 5673 mutex_unlock(&il->mutex); 5674 return; 5675 } 5676 5677 if (il->start_calib) { 5678 il4965_chain_noise_calibration(il, (void *)&il->_4965.stats); 5679 il4965_sensitivity_calibration(il, (void *)&il->_4965.stats); 5680 } 5681 5682 mutex_unlock(&il->mutex); 5683 } 5684 5685 static void 5686 il4965_bg_restart(struct work_struct *data) 5687 { 5688 struct il_priv *il = container_of(data, struct il_priv, restart); 5689 5690 if (test_bit(S_EXIT_PENDING, &il->status)) 5691 return; 5692 5693 if (test_and_clear_bit(S_FW_ERROR, &il->status)) { 5694 mutex_lock(&il->mutex); 5695 il->is_open = 0; 5696 5697 __il4965_down(il); 5698 5699 mutex_unlock(&il->mutex); 5700 il4965_cancel_deferred_work(il); 5701 ieee80211_restart_hw(il->hw); 5702 } else { 5703 il4965_down(il); 5704 5705 mutex_lock(&il->mutex); 5706 if (test_bit(S_EXIT_PENDING, &il->status)) { 5707 mutex_unlock(&il->mutex); 5708 return; 5709 } 5710 5711 __il4965_up(il); 5712 mutex_unlock(&il->mutex); 5713 } 5714 } 5715 5716 static void 5717 il4965_bg_rx_replenish(struct work_struct *data) 5718 { 5719 struct il_priv *il = container_of(data, struct il_priv, rx_replenish); 5720 5721 if (test_bit(S_EXIT_PENDING, &il->status)) 5722 return; 5723 5724 mutex_lock(&il->mutex); 5725 il4965_rx_replenish(il); 5726 mutex_unlock(&il->mutex); 5727 } 5728 5729 /***************************************************************************** 5730 * 5731 * mac80211 entry point functions 5732 * 5733 *****************************************************************************/ 5734 5735 #define UCODE_READY_TIMEOUT (4 * HZ) 5736 5737 /* 5738 * Not a mac80211 entry point function, but it fits in with all the 5739 * other mac80211 functions grouped here. 5740 */ 5741 static int 5742 il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) 5743 { 5744 int ret; 5745 struct ieee80211_hw *hw = il->hw; 5746 5747 hw->rate_control_algorithm = "iwl-4965-rs"; 5748 5749 /* Tell mac80211 our characteristics */ 5750 ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS); 5751 ieee80211_hw_set(hw, SUPPORTS_PS); 5752 ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); 5753 ieee80211_hw_set(hw, SPECTRUM_MGMT); 5754 ieee80211_hw_set(hw, NEED_DTIM_BEFORE_ASSOC); 5755 ieee80211_hw_set(hw, SIGNAL_DBM); 5756 ieee80211_hw_set(hw, AMPDU_AGGREGATION); 5757 if (il->cfg->sku & IL_SKU_N) 5758 hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS | 5759 NL80211_FEATURE_STATIC_SMPS; 5760 5761 hw->sta_data_size = sizeof(struct il_station_priv); 5762 hw->vif_data_size = sizeof(struct il_vif_priv); 5763 5764 hw->wiphy->interface_modes = 5765 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); 5766 5767 hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; 5768 hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | 5769 REGULATORY_DISABLE_BEACON_HINTS; 5770 5771 /* 5772 * For now, disable PS by default because it affects 5773 * RX performance significantly. 5774 */ 5775 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; 5776 5777 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; 5778 /* we create the 802.11 header and a zero-length SSID element */ 5779 hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2; 5780 5781 /* Default value; 4 EDCA QOS priorities */ 5782 hw->queues = 4; 5783 5784 hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL; 5785 5786 if (il->bands[NL80211_BAND_2GHZ].n_channels) 5787 il->hw->wiphy->bands[NL80211_BAND_2GHZ] = 5788 &il->bands[NL80211_BAND_2GHZ]; 5789 if (il->bands[NL80211_BAND_5GHZ].n_channels) 5790 il->hw->wiphy->bands[NL80211_BAND_5GHZ] = 5791 &il->bands[NL80211_BAND_5GHZ]; 5792 5793 il_leds_init(il); 5794 5795 wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); 5796 5797 ret = ieee80211_register_hw(il->hw); 5798 if (ret) { 5799 IL_ERR("Failed to register hw (error %d)\n", ret); 5800 return ret; 5801 } 5802 il->mac80211_registered = 1; 5803 5804 return 0; 5805 } 5806 5807 int 5808 il4965_mac_start(struct ieee80211_hw *hw) 5809 { 5810 struct il_priv *il = hw->priv; 5811 int ret; 5812 5813 D_MAC80211("enter\n"); 5814 5815 /* we should be verifying the device is ready to be opened */ 5816 mutex_lock(&il->mutex); 5817 ret = __il4965_up(il); 5818 mutex_unlock(&il->mutex); 5819 5820 if (ret) 5821 return ret; 5822 5823 if (il_is_rfkill(il)) 5824 goto out; 5825 5826 D_INFO("Start UP work done.\n"); 5827 5828 /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from 5829 * mac80211 will not be run successfully. */ 5830 ret = wait_event_timeout(il->wait_command_queue, 5831 test_bit(S_READY, &il->status), 5832 UCODE_READY_TIMEOUT); 5833 if (!ret) { 5834 if (!test_bit(S_READY, &il->status)) { 5835 IL_ERR("START_ALIVE timeout after %dms.\n", 5836 jiffies_to_msecs(UCODE_READY_TIMEOUT)); 5837 return -ETIMEDOUT; 5838 } 5839 } 5840 5841 il4965_led_enable(il); 5842 5843 out: 5844 il->is_open = 1; 5845 D_MAC80211("leave\n"); 5846 return 0; 5847 } 5848 5849 void 5850 il4965_mac_stop(struct ieee80211_hw *hw) 5851 { 5852 struct il_priv *il = hw->priv; 5853 5854 D_MAC80211("enter\n"); 5855 5856 if (!il->is_open) 5857 return; 5858 5859 il->is_open = 0; 5860 5861 il4965_down(il); 5862 5863 flush_workqueue(il->workqueue); 5864 5865 /* User space software may expect getting rfkill changes 5866 * even if interface is down */ 5867 _il_wr(il, CSR_INT, 0xFFFFFFFF); 5868 il_enable_rfkill_int(il); 5869 5870 D_MAC80211("leave\n"); 5871 } 5872 5873 void 5874 il4965_mac_tx(struct ieee80211_hw *hw, 5875 struct ieee80211_tx_control *control, 5876 struct sk_buff *skb) 5877 { 5878 struct il_priv *il = hw->priv; 5879 5880 D_MACDUMP("enter\n"); 5881 5882 D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, 5883 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); 5884 5885 if (il4965_tx_skb(il, control->sta, skb)) 5886 dev_kfree_skb_any(skb); 5887 5888 D_MACDUMP("leave\n"); 5889 } 5890 5891 void 5892 il4965_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 5893 struct ieee80211_key_conf *keyconf, 5894 struct ieee80211_sta *sta, u32 iv32, u16 * phase1key) 5895 { 5896 struct il_priv *il = hw->priv; 5897 5898 D_MAC80211("enter\n"); 5899 5900 il4965_update_tkip_key(il, keyconf, sta, iv32, phase1key); 5901 5902 D_MAC80211("leave\n"); 5903 } 5904 5905 int 5906 il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, 5907 struct ieee80211_vif *vif, struct ieee80211_sta *sta, 5908 struct ieee80211_key_conf *key) 5909 { 5910 struct il_priv *il = hw->priv; 5911 int ret; 5912 u8 sta_id; 5913 bool is_default_wep_key = false; 5914 5915 D_MAC80211("enter\n"); 5916 5917 if (il->cfg->mod_params->sw_crypto) { 5918 D_MAC80211("leave - hwcrypto disabled\n"); 5919 return -EOPNOTSUPP; 5920 } 5921 5922 /* 5923 * To support IBSS RSN, don't program group keys in IBSS, the 5924 * hardware will then not attempt to decrypt the frames. 5925 */ 5926 if (vif->type == NL80211_IFTYPE_ADHOC && 5927 !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { 5928 D_MAC80211("leave - ad-hoc group key\n"); 5929 return -EOPNOTSUPP; 5930 } 5931 5932 sta_id = il_sta_id_or_broadcast(il, sta); 5933 if (sta_id == IL_INVALID_STATION) 5934 return -EINVAL; 5935 5936 mutex_lock(&il->mutex); 5937 il_scan_cancel_timeout(il, 100); 5938 5939 /* 5940 * If we are getting WEP group key and we didn't receive any key mapping 5941 * so far, we are in legacy wep mode (group key only), otherwise we are 5942 * in 1X mode. 5943 * In legacy wep mode, we use another host command to the uCode. 5944 */ 5945 if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || 5946 key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) { 5947 if (cmd == SET_KEY) 5948 is_default_wep_key = !il->_4965.key_mapping_keys; 5949 else 5950 is_default_wep_key = 5951 (key->hw_key_idx == HW_KEY_DEFAULT); 5952 } 5953 5954 switch (cmd) { 5955 case SET_KEY: 5956 if (is_default_wep_key) 5957 ret = il4965_set_default_wep_key(il, key); 5958 else 5959 ret = il4965_set_dynamic_key(il, key, sta_id); 5960 5961 D_MAC80211("enable hwcrypto key\n"); 5962 break; 5963 case DISABLE_KEY: 5964 if (is_default_wep_key) 5965 ret = il4965_remove_default_wep_key(il, key); 5966 else 5967 ret = il4965_remove_dynamic_key(il, key, sta_id); 5968 5969 D_MAC80211("disable hwcrypto key\n"); 5970 break; 5971 default: 5972 ret = -EINVAL; 5973 } 5974 5975 mutex_unlock(&il->mutex); 5976 D_MAC80211("leave\n"); 5977 5978 return ret; 5979 } 5980 5981 int 5982 il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 5983 struct ieee80211_ampdu_params *params) 5984 { 5985 struct il_priv *il = hw->priv; 5986 int ret = -EINVAL; 5987 struct ieee80211_sta *sta = params->sta; 5988 enum ieee80211_ampdu_mlme_action action = params->action; 5989 u16 tid = params->tid; 5990 u16 *ssn = ¶ms->ssn; 5991 5992 D_HT("A-MPDU action on addr %pM tid %d\n", sta->addr, tid); 5993 5994 if (!(il->cfg->sku & IL_SKU_N)) 5995 return -EACCES; 5996 5997 mutex_lock(&il->mutex); 5998 5999 switch (action) { 6000 case IEEE80211_AMPDU_RX_START: 6001 D_HT("start Rx\n"); 6002 ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn); 6003 break; 6004 case IEEE80211_AMPDU_RX_STOP: 6005 D_HT("stop Rx\n"); 6006 ret = il4965_sta_rx_agg_stop(il, sta, tid); 6007 if (test_bit(S_EXIT_PENDING, &il->status)) 6008 ret = 0; 6009 break; 6010 case IEEE80211_AMPDU_TX_START: 6011 D_HT("start Tx\n"); 6012 ret = il4965_tx_agg_start(il, vif, sta, tid, ssn); 6013 break; 6014 case IEEE80211_AMPDU_TX_STOP_CONT: 6015 case IEEE80211_AMPDU_TX_STOP_FLUSH: 6016 case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: 6017 D_HT("stop Tx\n"); 6018 ret = il4965_tx_agg_stop(il, vif, sta, tid); 6019 if (test_bit(S_EXIT_PENDING, &il->status)) 6020 ret = 0; 6021 break; 6022 case IEEE80211_AMPDU_TX_OPERATIONAL: 6023 ret = 0; 6024 break; 6025 } 6026 mutex_unlock(&il->mutex); 6027 6028 return ret; 6029 } 6030 6031 int 6032 il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 6033 struct ieee80211_sta *sta) 6034 { 6035 struct il_priv *il = hw->priv; 6036 struct il_station_priv *sta_priv = (void *)sta->drv_priv; 6037 bool is_ap = vif->type == NL80211_IFTYPE_STATION; 6038 int ret; 6039 u8 sta_id; 6040 6041 D_INFO("received request to add station %pM\n", sta->addr); 6042 mutex_lock(&il->mutex); 6043 D_INFO("proceeding to add station %pM\n", sta->addr); 6044 sta_priv->common.sta_id = IL_INVALID_STATION; 6045 6046 atomic_set(&sta_priv->pending_frames, 0); 6047 6048 ret = 6049 il_add_station_common(il, sta->addr, is_ap, sta, &sta_id); 6050 if (ret) { 6051 IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret); 6052 /* Should we return success if return code is EEXIST ? */ 6053 mutex_unlock(&il->mutex); 6054 return ret; 6055 } 6056 6057 sta_priv->common.sta_id = sta_id; 6058 6059 /* Initialize rate scaling */ 6060 D_INFO("Initializing rate scaling for station %pM\n", sta->addr); 6061 il4965_rs_rate_init(il, sta, sta_id); 6062 mutex_unlock(&il->mutex); 6063 6064 return 0; 6065 } 6066 6067 void 6068 il4965_mac_channel_switch(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 6069 struct ieee80211_channel_switch *ch_switch) 6070 { 6071 struct il_priv *il = hw->priv; 6072 const struct il_channel_info *ch_info; 6073 struct ieee80211_conf *conf = &hw->conf; 6074 struct ieee80211_channel *channel = ch_switch->chandef.chan; 6075 struct il_ht_config *ht_conf = &il->current_ht_config; 6076 u16 ch; 6077 6078 D_MAC80211("enter\n"); 6079 6080 mutex_lock(&il->mutex); 6081 6082 if (il_is_rfkill(il)) 6083 goto out; 6084 6085 if (test_bit(S_EXIT_PENDING, &il->status) || 6086 test_bit(S_SCANNING, &il->status) || 6087 test_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) 6088 goto out; 6089 6090 if (!il_is_associated(il)) 6091 goto out; 6092 6093 if (!il->ops->set_channel_switch) 6094 goto out; 6095 6096 ch = channel->hw_value; 6097 if (le16_to_cpu(il->active.channel) == ch) 6098 goto out; 6099 6100 ch_info = il_get_channel_info(il, channel->band, ch); 6101 if (!il_is_channel_valid(ch_info)) { 6102 D_MAC80211("invalid channel\n"); 6103 goto out; 6104 } 6105 6106 spin_lock_irq(&il->lock); 6107 6108 il->current_ht_config.smps = conf->smps_mode; 6109 6110 /* Configure HT40 channels */ 6111 switch (cfg80211_get_chandef_type(&ch_switch->chandef)) { 6112 case NL80211_CHAN_NO_HT: 6113 case NL80211_CHAN_HT20: 6114 il->ht.is_40mhz = false; 6115 il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; 6116 break; 6117 case NL80211_CHAN_HT40MINUS: 6118 il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; 6119 il->ht.is_40mhz = true; 6120 break; 6121 case NL80211_CHAN_HT40PLUS: 6122 il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; 6123 il->ht.is_40mhz = true; 6124 break; 6125 } 6126 6127 if ((le16_to_cpu(il->staging.channel) != ch)) 6128 il->staging.flags = 0; 6129 6130 il_set_rxon_channel(il, channel); 6131 il_set_rxon_ht(il, ht_conf); 6132 il_set_flags_for_band(il, channel->band, il->vif); 6133 6134 spin_unlock_irq(&il->lock); 6135 6136 il_set_rate(il); 6137 /* 6138 * at this point, staging_rxon has the 6139 * configuration for channel switch 6140 */ 6141 set_bit(S_CHANNEL_SWITCH_PENDING, &il->status); 6142 il->switch_channel = cpu_to_le16(ch); 6143 if (il->ops->set_channel_switch(il, ch_switch)) { 6144 clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status); 6145 il->switch_channel = 0; 6146 ieee80211_chswitch_done(il->vif, false); 6147 } 6148 6149 out: 6150 mutex_unlock(&il->mutex); 6151 D_MAC80211("leave\n"); 6152 } 6153 6154 void 6155 il4965_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, 6156 unsigned int *total_flags, u64 multicast) 6157 { 6158 struct il_priv *il = hw->priv; 6159 __le32 filter_or = 0, filter_nand = 0; 6160 6161 #define CHK(test, flag) do { \ 6162 if (*total_flags & (test)) \ 6163 filter_or |= (flag); \ 6164 else \ 6165 filter_nand |= (flag); \ 6166 } while (0) 6167 6168 D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags, 6169 *total_flags); 6170 6171 CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK); 6172 /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ 6173 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); 6174 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); 6175 6176 #undef CHK 6177 6178 mutex_lock(&il->mutex); 6179 6180 il->staging.filter_flags &= ~filter_nand; 6181 il->staging.filter_flags |= filter_or; 6182 6183 /* 6184 * Not committing directly because hardware can perform a scan, 6185 * but we'll eventually commit the filter flags change anyway. 6186 */ 6187 6188 mutex_unlock(&il->mutex); 6189 6190 /* 6191 * Receiving all multicast frames is always enabled by the 6192 * default flags setup in il_connection_init_rx_config() 6193 * since we currently do not support programming multicast 6194 * filters into the device. 6195 */ 6196 *total_flags &= 6197 FIF_OTHER_BSS | FIF_ALLMULTI | 6198 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; 6199 } 6200 6201 /***************************************************************************** 6202 * 6203 * driver setup and teardown 6204 * 6205 *****************************************************************************/ 6206 6207 static void 6208 il4965_bg_txpower_work(struct work_struct *work) 6209 { 6210 struct il_priv *il = container_of(work, struct il_priv, 6211 txpower_work); 6212 6213 mutex_lock(&il->mutex); 6214 6215 /* If a scan happened to start before we got here 6216 * then just return; the stats notification will 6217 * kick off another scheduled work to compensate for 6218 * any temperature delta we missed here. */ 6219 if (test_bit(S_EXIT_PENDING, &il->status) || 6220 test_bit(S_SCANNING, &il->status)) 6221 goto out; 6222 6223 /* Regardless of if we are associated, we must reconfigure the 6224 * TX power since frames can be sent on non-radar channels while 6225 * not associated */ 6226 il->ops->send_tx_power(il); 6227 6228 /* Update last_temperature to keep is_calib_needed from running 6229 * when it isn't needed... */ 6230 il->last_temperature = il->temperature; 6231 out: 6232 mutex_unlock(&il->mutex); 6233 } 6234 6235 static void 6236 il4965_setup_deferred_work(struct il_priv *il) 6237 { 6238 il->workqueue = create_singlethread_workqueue(DRV_NAME); 6239 6240 init_waitqueue_head(&il->wait_command_queue); 6241 6242 INIT_WORK(&il->restart, il4965_bg_restart); 6243 INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish); 6244 INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work); 6245 INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start); 6246 INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start); 6247 6248 il_setup_scan_deferred_work(il); 6249 6250 INIT_WORK(&il->txpower_work, il4965_bg_txpower_work); 6251 6252 timer_setup(&il->stats_periodic, il4965_bg_stats_periodic, 0); 6253 6254 timer_setup(&il->watchdog, il_bg_watchdog, 0); 6255 6256 tasklet_init(&il->irq_tasklet, 6257 (void (*)(unsigned long))il4965_irq_tasklet, 6258 (unsigned long)il); 6259 } 6260 6261 static void 6262 il4965_cancel_deferred_work(struct il_priv *il) 6263 { 6264 cancel_work_sync(&il->txpower_work); 6265 cancel_delayed_work_sync(&il->init_alive_start); 6266 cancel_delayed_work(&il->alive_start); 6267 cancel_work_sync(&il->run_time_calib_work); 6268 6269 il_cancel_scan_deferred_work(il); 6270 6271 del_timer_sync(&il->stats_periodic); 6272 } 6273 6274 static void 6275 il4965_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates) 6276 { 6277 int i; 6278 6279 for (i = 0; i < RATE_COUNT_LEGACY; i++) { 6280 rates[i].bitrate = il_rates[i].ieee * 5; 6281 rates[i].hw_value = i; /* Rate scaling will work on idxes */ 6282 rates[i].hw_value_short = i; 6283 rates[i].flags = 0; 6284 if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) { 6285 /* 6286 * If CCK != 1M then set short preamble rate flag. 6287 */ 6288 rates[i].flags |= 6289 (il_rates[i].plcp == 6290 RATE_1M_PLCP) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE; 6291 } 6292 } 6293 } 6294 6295 /* 6296 * Acquire il->lock before calling this function ! 6297 */ 6298 void 6299 il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx) 6300 { 6301 il_wr(il, HBUS_TARG_WRPTR, (idx & 0xff) | (txq_id << 8)); 6302 il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx); 6303 } 6304 6305 void 6306 il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq, 6307 int tx_fifo_id, int scd_retry) 6308 { 6309 int txq_id = txq->q.id; 6310 6311 /* Find out whether to activate Tx queue */ 6312 int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0; 6313 6314 /* Set up and activate */ 6315 il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), 6316 (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | 6317 (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) | 6318 (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) | 6319 (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | 6320 IL49_SCD_QUEUE_STTS_REG_MSK); 6321 6322 txq->sched_retry = scd_retry; 6323 6324 D_INFO("%s %s Queue %d on AC %d\n", active ? "Activate" : "Deactivate", 6325 scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); 6326 } 6327 6328 static const struct ieee80211_ops il4965_mac_ops = { 6329 .tx = il4965_mac_tx, 6330 .start = il4965_mac_start, 6331 .stop = il4965_mac_stop, 6332 .add_interface = il_mac_add_interface, 6333 .remove_interface = il_mac_remove_interface, 6334 .change_interface = il_mac_change_interface, 6335 .config = il_mac_config, 6336 .configure_filter = il4965_configure_filter, 6337 .set_key = il4965_mac_set_key, 6338 .update_tkip_key = il4965_mac_update_tkip_key, 6339 .conf_tx = il_mac_conf_tx, 6340 .reset_tsf = il_mac_reset_tsf, 6341 .bss_info_changed = il_mac_bss_info_changed, 6342 .ampdu_action = il4965_mac_ampdu_action, 6343 .hw_scan = il_mac_hw_scan, 6344 .sta_add = il4965_mac_sta_add, 6345 .sta_remove = il_mac_sta_remove, 6346 .channel_switch = il4965_mac_channel_switch, 6347 .tx_last_beacon = il_mac_tx_last_beacon, 6348 .flush = il_mac_flush, 6349 }; 6350 6351 static int 6352 il4965_init_drv(struct il_priv *il) 6353 { 6354 int ret; 6355 6356 spin_lock_init(&il->sta_lock); 6357 spin_lock_init(&il->hcmd_lock); 6358 6359 INIT_LIST_HEAD(&il->free_frames); 6360 6361 mutex_init(&il->mutex); 6362 6363 il->ieee_channels = NULL; 6364 il->ieee_rates = NULL; 6365 il->band = NL80211_BAND_2GHZ; 6366 6367 il->iw_mode = NL80211_IFTYPE_STATION; 6368 il->current_ht_config.smps = IEEE80211_SMPS_STATIC; 6369 il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF; 6370 6371 /* initialize force reset */ 6372 il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD; 6373 6374 /* Choose which receivers/antennas to use */ 6375 if (il->ops->set_rxon_chain) 6376 il->ops->set_rxon_chain(il); 6377 6378 il_init_scan_params(il); 6379 6380 ret = il_init_channel_map(il); 6381 if (ret) { 6382 IL_ERR("initializing regulatory failed: %d\n", ret); 6383 goto err; 6384 } 6385 6386 ret = il_init_geos(il); 6387 if (ret) { 6388 IL_ERR("initializing geos failed: %d\n", ret); 6389 goto err_free_channel_map; 6390 } 6391 il4965_init_hw_rates(il, il->ieee_rates); 6392 6393 return 0; 6394 6395 err_free_channel_map: 6396 il_free_channel_map(il); 6397 err: 6398 return ret; 6399 } 6400 6401 static void 6402 il4965_uninit_drv(struct il_priv *il) 6403 { 6404 il_free_geos(il); 6405 il_free_channel_map(il); 6406 kfree(il->scan_cmd); 6407 } 6408 6409 static void 6410 il4965_hw_detect(struct il_priv *il) 6411 { 6412 il->hw_rev = _il_rd(il, CSR_HW_REV); 6413 il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG); 6414 il->rev_id = il->pci_dev->revision; 6415 D_INFO("HW Revision ID = 0x%X\n", il->rev_id); 6416 } 6417 6418 static const struct il_sensitivity_ranges il4965_sensitivity = { 6419 .min_nrg_cck = 97, 6420 .max_nrg_cck = 0, /* not used, set to 0 */ 6421 6422 .auto_corr_min_ofdm = 85, 6423 .auto_corr_min_ofdm_mrc = 170, 6424 .auto_corr_min_ofdm_x1 = 105, 6425 .auto_corr_min_ofdm_mrc_x1 = 220, 6426 6427 .auto_corr_max_ofdm = 120, 6428 .auto_corr_max_ofdm_mrc = 210, 6429 .auto_corr_max_ofdm_x1 = 140, 6430 .auto_corr_max_ofdm_mrc_x1 = 270, 6431 6432 .auto_corr_min_cck = 125, 6433 .auto_corr_max_cck = 200, 6434 .auto_corr_min_cck_mrc = 200, 6435 .auto_corr_max_cck_mrc = 400, 6436 6437 .nrg_th_cck = 100, 6438 .nrg_th_ofdm = 100, 6439 6440 .barker_corr_th_min = 190, 6441 .barker_corr_th_min_mrc = 390, 6442 .nrg_th_cca = 62, 6443 }; 6444 6445 static void 6446 il4965_set_hw_params(struct il_priv *il) 6447 { 6448 il->hw_params.bcast_id = IL4965_BROADCAST_ID; 6449 il->hw_params.max_rxq_size = RX_QUEUE_SIZE; 6450 il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; 6451 if (il->cfg->mod_params->amsdu_size_8K) 6452 il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K); 6453 else 6454 il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K); 6455 6456 il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL; 6457 6458 if (il->cfg->mod_params->disable_11n) 6459 il->cfg->sku &= ~IL_SKU_N; 6460 6461 if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES && 6462 il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES) 6463 il->cfg->num_of_queues = 6464 il->cfg->mod_params->num_of_queues; 6465 6466 il->hw_params.max_txq_num = il->cfg->num_of_queues; 6467 il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM; 6468 il->hw_params.scd_bc_tbls_size = 6469 il->cfg->num_of_queues * 6470 sizeof(struct il4965_scd_bc_tbl); 6471 6472 il->hw_params.tfd_size = sizeof(struct il_tfd); 6473 il->hw_params.max_stations = IL4965_STATION_COUNT; 6474 il->hw_params.max_data_size = IL49_RTC_DATA_SIZE; 6475 il->hw_params.max_inst_size = IL49_RTC_INST_SIZE; 6476 il->hw_params.max_bsm_size = BSM_SRAM_SIZE; 6477 il->hw_params.ht40_channel = BIT(NL80211_BAND_5GHZ); 6478 6479 il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR; 6480 6481 il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant); 6482 il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant); 6483 il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant; 6484 il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant; 6485 6486 il->hw_params.ct_kill_threshold = 6487 CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY); 6488 6489 il->hw_params.sens = &il4965_sensitivity; 6490 il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS; 6491 } 6492 6493 static int 6494 il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 6495 { 6496 int err = 0; 6497 struct il_priv *il; 6498 struct ieee80211_hw *hw; 6499 struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data); 6500 unsigned long flags; 6501 u16 pci_cmd; 6502 6503 /************************ 6504 * 1. Allocating HW data 6505 ************************/ 6506 6507 hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il4965_mac_ops); 6508 if (!hw) { 6509 err = -ENOMEM; 6510 goto out; 6511 } 6512 il = hw->priv; 6513 il->hw = hw; 6514 SET_IEEE80211_DEV(hw, &pdev->dev); 6515 6516 D_INFO("*** LOAD DRIVER ***\n"); 6517 il->cfg = cfg; 6518 il->ops = &il4965_ops; 6519 #ifdef CONFIG_IWLEGACY_DEBUGFS 6520 il->debugfs_ops = &il4965_debugfs_ops; 6521 #endif 6522 il->pci_dev = pdev; 6523 il->inta_mask = CSR_INI_SET_MASK; 6524 6525 /************************** 6526 * 2. Initializing PCI bus 6527 **************************/ 6528 pci_disable_link_state(pdev, 6529 PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | 6530 PCIE_LINK_STATE_CLKPM); 6531 6532 if (pci_enable_device(pdev)) { 6533 err = -ENODEV; 6534 goto out_ieee80211_free_hw; 6535 } 6536 6537 pci_set_master(pdev); 6538 6539 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); 6540 if (!err) 6541 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); 6542 if (err) { 6543 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); 6544 if (!err) 6545 err = 6546 pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); 6547 /* both attempts failed: */ 6548 if (err) { 6549 IL_WARN("No suitable DMA available.\n"); 6550 goto out_pci_disable_device; 6551 } 6552 } 6553 6554 err = pci_request_regions(pdev, DRV_NAME); 6555 if (err) 6556 goto out_pci_disable_device; 6557 6558 pci_set_drvdata(pdev, il); 6559 6560 /*********************** 6561 * 3. Read REV register 6562 ***********************/ 6563 il->hw_base = pci_ioremap_bar(pdev, 0); 6564 if (!il->hw_base) { 6565 err = -ENODEV; 6566 goto out_pci_release_regions; 6567 } 6568 6569 D_INFO("pci_resource_len = 0x%08llx\n", 6570 (unsigned long long)pci_resource_len(pdev, 0)); 6571 D_INFO("pci_resource_base = %p\n", il->hw_base); 6572 6573 /* these spin locks will be used in apm_ops.init and EEPROM access 6574 * we should init now 6575 */ 6576 spin_lock_init(&il->reg_lock); 6577 spin_lock_init(&il->lock); 6578 6579 /* 6580 * stop and reset the on-board processor just in case it is in a 6581 * strange state ... like being left stranded by a primary kernel 6582 * and this is now the kdump kernel trying to start up 6583 */ 6584 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); 6585 6586 il4965_hw_detect(il); 6587 IL_INFO("Detected %s, REV=0x%X\n", il->cfg->name, il->hw_rev); 6588 6589 /* We disable the RETRY_TIMEOUT register (0x41) to keep 6590 * PCI Tx retries from interfering with C3 CPU state */ 6591 pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); 6592 6593 il4965_prepare_card_hw(il); 6594 if (!il->hw_ready) { 6595 IL_WARN("Failed, HW not ready\n"); 6596 err = -EIO; 6597 goto out_iounmap; 6598 } 6599 6600 /***************** 6601 * 4. Read EEPROM 6602 *****************/ 6603 /* Read the EEPROM */ 6604 err = il_eeprom_init(il); 6605 if (err) { 6606 IL_ERR("Unable to init EEPROM\n"); 6607 goto out_iounmap; 6608 } 6609 err = il4965_eeprom_check_version(il); 6610 if (err) 6611 goto out_free_eeprom; 6612 6613 /* extract MAC Address */ 6614 il4965_eeprom_get_mac(il, il->addresses[0].addr); 6615 D_INFO("MAC address: %pM\n", il->addresses[0].addr); 6616 il->hw->wiphy->addresses = il->addresses; 6617 il->hw->wiphy->n_addresses = 1; 6618 6619 /************************ 6620 * 5. Setup HW constants 6621 ************************/ 6622 il4965_set_hw_params(il); 6623 6624 /******************* 6625 * 6. Setup il 6626 *******************/ 6627 6628 err = il4965_init_drv(il); 6629 if (err) 6630 goto out_free_eeprom; 6631 /* At this point both hw and il are initialized. */ 6632 6633 /******************** 6634 * 7. Setup services 6635 ********************/ 6636 spin_lock_irqsave(&il->lock, flags); 6637 il_disable_interrupts(il); 6638 spin_unlock_irqrestore(&il->lock, flags); 6639 6640 pci_enable_msi(il->pci_dev); 6641 6642 err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il); 6643 if (err) { 6644 IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq); 6645 goto out_disable_msi; 6646 } 6647 6648 il4965_setup_deferred_work(il); 6649 il4965_setup_handlers(il); 6650 6651 /********************************************* 6652 * 8. Enable interrupts and read RFKILL state 6653 *********************************************/ 6654 6655 /* enable rfkill interrupt: hw bug w/a */ 6656 pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd); 6657 if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { 6658 pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; 6659 pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd); 6660 } 6661 6662 il_enable_rfkill_int(il); 6663 6664 /* If platform's RF_KILL switch is NOT set to KILL */ 6665 if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) 6666 clear_bit(S_RFKILL, &il->status); 6667 else 6668 set_bit(S_RFKILL, &il->status); 6669 6670 wiphy_rfkill_set_hw_state(il->hw->wiphy, 6671 test_bit(S_RFKILL, &il->status)); 6672 6673 il_power_initialize(il); 6674 6675 init_completion(&il->_4965.firmware_loading_complete); 6676 6677 err = il4965_request_firmware(il, true); 6678 if (err) 6679 goto out_destroy_workqueue; 6680 6681 return 0; 6682 6683 out_destroy_workqueue: 6684 destroy_workqueue(il->workqueue); 6685 il->workqueue = NULL; 6686 free_irq(il->pci_dev->irq, il); 6687 out_disable_msi: 6688 pci_disable_msi(il->pci_dev); 6689 il4965_uninit_drv(il); 6690 out_free_eeprom: 6691 il_eeprom_free(il); 6692 out_iounmap: 6693 iounmap(il->hw_base); 6694 out_pci_release_regions: 6695 pci_release_regions(pdev); 6696 out_pci_disable_device: 6697 pci_disable_device(pdev); 6698 out_ieee80211_free_hw: 6699 ieee80211_free_hw(il->hw); 6700 out: 6701 return err; 6702 } 6703 6704 static void 6705 il4965_pci_remove(struct pci_dev *pdev) 6706 { 6707 struct il_priv *il = pci_get_drvdata(pdev); 6708 unsigned long flags; 6709 6710 if (!il) 6711 return; 6712 6713 wait_for_completion(&il->_4965.firmware_loading_complete); 6714 6715 D_INFO("*** UNLOAD DRIVER ***\n"); 6716 6717 il_dbgfs_unregister(il); 6718 sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group); 6719 6720 /* ieee80211_unregister_hw call wil cause il_mac_stop to 6721 * to be called and il4965_down since we are removing the device 6722 * we need to set S_EXIT_PENDING bit. 6723 */ 6724 set_bit(S_EXIT_PENDING, &il->status); 6725 6726 il_leds_exit(il); 6727 6728 if (il->mac80211_registered) { 6729 ieee80211_unregister_hw(il->hw); 6730 il->mac80211_registered = 0; 6731 } else { 6732 il4965_down(il); 6733 } 6734 6735 /* 6736 * Make sure device is reset to low power before unloading driver. 6737 * This may be redundant with il4965_down(), but there are paths to 6738 * run il4965_down() without calling apm_ops.stop(), and there are 6739 * paths to avoid running il4965_down() at all before leaving driver. 6740 * This (inexpensive) call *makes sure* device is reset. 6741 */ 6742 il_apm_stop(il); 6743 6744 /* make sure we flush any pending irq or 6745 * tasklet for the driver 6746 */ 6747 spin_lock_irqsave(&il->lock, flags); 6748 il_disable_interrupts(il); 6749 spin_unlock_irqrestore(&il->lock, flags); 6750 6751 il4965_synchronize_irq(il); 6752 6753 il4965_dealloc_ucode_pci(il); 6754 6755 if (il->rxq.bd) 6756 il4965_rx_queue_free(il, &il->rxq); 6757 il4965_hw_txq_ctx_free(il); 6758 6759 il_eeprom_free(il); 6760 6761 /*netif_stop_queue(dev); */ 6762 flush_workqueue(il->workqueue); 6763 6764 /* ieee80211_unregister_hw calls il_mac_stop, which flushes 6765 * il->workqueue... so we can't take down the workqueue 6766 * until now... */ 6767 destroy_workqueue(il->workqueue); 6768 il->workqueue = NULL; 6769 6770 free_irq(il->pci_dev->irq, il); 6771 pci_disable_msi(il->pci_dev); 6772 iounmap(il->hw_base); 6773 pci_release_regions(pdev); 6774 pci_disable_device(pdev); 6775 6776 il4965_uninit_drv(il); 6777 6778 dev_kfree_skb(il->beacon_skb); 6779 6780 ieee80211_free_hw(il->hw); 6781 } 6782 6783 /* 6784 * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask 6785 * must be called under il->lock and mac access 6786 */ 6787 void 6788 il4965_txq_set_sched(struct il_priv *il, u32 mask) 6789 { 6790 il_wr_prph(il, IL49_SCD_TXFACT, mask); 6791 } 6792 6793 /***************************************************************************** 6794 * 6795 * driver and module entry point 6796 * 6797 *****************************************************************************/ 6798 6799 /* Hardware specific file defines the PCI IDs table for that hardware module */ 6800 static const struct pci_device_id il4965_hw_card_ids[] = { 6801 {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)}, 6802 {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)}, 6803 {0} 6804 }; 6805 MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids); 6806 6807 static struct pci_driver il4965_driver = { 6808 .name = DRV_NAME, 6809 .id_table = il4965_hw_card_ids, 6810 .probe = il4965_pci_probe, 6811 .remove = il4965_pci_remove, 6812 .driver.pm = IL_LEGACY_PM_OPS, 6813 }; 6814 6815 static int __init 6816 il4965_init(void) 6817 { 6818 6819 int ret; 6820 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); 6821 pr_info(DRV_COPYRIGHT "\n"); 6822 6823 ret = il4965_rate_control_register(); 6824 if (ret) { 6825 pr_err("Unable to register rate control algorithm: %d\n", ret); 6826 return ret; 6827 } 6828 6829 ret = pci_register_driver(&il4965_driver); 6830 if (ret) { 6831 pr_err("Unable to initialize PCI module\n"); 6832 goto error_register; 6833 } 6834 6835 return ret; 6836 6837 error_register: 6838 il4965_rate_control_unregister(); 6839 return ret; 6840 } 6841 6842 static void __exit 6843 il4965_exit(void) 6844 { 6845 pci_unregister_driver(&il4965_driver); 6846 il4965_rate_control_unregister(); 6847 } 6848 6849 module_exit(il4965_exit); 6850 module_init(il4965_init); 6851 6852 #ifdef CONFIG_IWLEGACY_DEBUG 6853 module_param_named(debug, il_debug_level, uint, 0644); 6854 MODULE_PARM_DESC(debug, "debug output mask"); 6855 #endif 6856 6857 module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, 0444); 6858 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); 6859 module_param_named(queues_num, il4965_mod_params.num_of_queues, int, 0444); 6860 MODULE_PARM_DESC(queues_num, "number of hw queues."); 6861 module_param_named(11n_disable, il4965_mod_params.disable_11n, int, 0444); 6862 MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); 6863 module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int, 0444); 6864 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])"); 6865 module_param_named(fw_restart, il4965_mod_params.restart_fw, int, 0444); 6866 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); 6867