1 /****************************************************************************** 2 * 3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. 4 * 5 * Portions of this file are derived from the ipw3945 project, as well 6 * as portions of the ieee80211 subsystem header files. 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of version 2 of the GNU General Public License as 10 * published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 15 * more details. 16 * 17 * You should have received a copy of the GNU General Public License along with 18 * this program; if not, write to the Free Software Foundation, Inc., 19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA 20 * 21 * The full GNU General Public License is included in this distribution in the 22 * file called LICENSE. 23 * 24 * Contact Information: 25 * Intel Linux Wireless <ilw@linux.intel.com> 26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 27 * 28 *****************************************************************************/ 29 30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 31 32 #include <linux/kernel.h> 33 #include <linux/module.h> 34 #include <linux/init.h> 35 #include <linux/pci.h> 36 #include <linux/pci-aspm.h> 37 #include <linux/slab.h> 38 #include <linux/dma-mapping.h> 39 #include <linux/delay.h> 40 #include <linux/sched.h> 41 #include <linux/skbuff.h> 42 #include <linux/netdevice.h> 43 #include <linux/firmware.h> 44 #include <linux/etherdevice.h> 45 #include <linux/if_arp.h> 46 47 #include <net/mac80211.h> 48 49 #include <asm/div64.h> 50 51 #define DRV_NAME "iwl4965" 52 53 #include "common.h" 54 #include "4965.h" 55 56 /****************************************************************************** 57 * 58 * module boiler plate 59 * 60 ******************************************************************************/ 61 62 /* 63 * module name, copyright, version, etc. 64 */ 65 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux" 66 67 #ifdef CONFIG_IWLEGACY_DEBUG 68 #define VD "d" 69 #else 70 #define VD 71 #endif 72 73 #define DRV_VERSION IWLWIFI_VERSION VD 74 75 MODULE_DESCRIPTION(DRV_DESCRIPTION); 76 MODULE_VERSION(DRV_VERSION); 77 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); 78 MODULE_LICENSE("GPL"); 79 MODULE_ALIAS("iwl4965"); 80 81 void 82 il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status) 83 { 84 if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { 85 IL_ERR("Tx flush command to flush out all frames\n"); 86 if (!test_bit(S_EXIT_PENDING, &il->status)) 87 queue_work(il->workqueue, &il->tx_flush); 88 } 89 } 90 91 /* 92 * EEPROM 93 */ 94 struct il_mod_params il4965_mod_params = { 95 .restart_fw = 1, 96 /* the rest are 0 by default */ 97 }; 98 99 void 100 il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq) 101 { 102 unsigned long flags; 103 int i; 104 spin_lock_irqsave(&rxq->lock, flags); 105 INIT_LIST_HEAD(&rxq->rx_free); 106 INIT_LIST_HEAD(&rxq->rx_used); 107 /* Fill the rx_used queue with _all_ of the Rx buffers */ 108 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { 109 /* In the reset function, these buffers may have been allocated 110 * to an SKB, so we need to unmap and free potential storage */ 111 if (rxq->pool[i].page != NULL) { 112 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, 113 PAGE_SIZE << il->hw_params.rx_page_order, 114 PCI_DMA_FROMDEVICE); 115 __il_free_pages(il, rxq->pool[i].page); 116 rxq->pool[i].page = NULL; 117 } 118 list_add_tail(&rxq->pool[i].list, &rxq->rx_used); 119 } 120 121 for (i = 0; i < RX_QUEUE_SIZE; i++) 122 rxq->queue[i] = NULL; 123 124 /* Set us so that we have processed and used all buffers, but have 125 * not restocked the Rx queue with fresh buffers */ 126 rxq->read = rxq->write = 0; 127 rxq->write_actual = 0; 128 rxq->free_count = 0; 129 spin_unlock_irqrestore(&rxq->lock, flags); 130 } 131 132 int 133 il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq) 134 { 135 u32 rb_size; 136 const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ 137 u32 rb_timeout = 0; 138 139 if (il->cfg->mod_params->amsdu_size_8K) 140 rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; 141 else 142 rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; 143 144 /* Stop Rx DMA */ 145 il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); 146 147 /* Reset driver's Rx queue write idx */ 148 il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); 149 150 /* Tell device where to find RBD circular buffer in DRAM */ 151 il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32) (rxq->bd_dma >> 8)); 152 153 /* Tell device where in DRAM to update its Rx status */ 154 il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4); 155 156 /* Enable Rx DMA 157 * Direct rx interrupts to hosts 158 * Rx buffer size 4 or 8k 159 * RB timeout 0x10 160 * 256 RBDs 161 */ 162 il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 163 FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | 164 FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | 165 FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | 166 rb_size | 167 (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) | 168 (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); 169 170 /* Set interrupt coalescing timer to default (2048 usecs) */ 171 il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF); 172 173 return 0; 174 } 175 176 static void 177 il4965_set_pwr_vmain(struct il_priv *il) 178 { 179 /* 180 * (for documentation purposes) 181 * to set power to V_AUX, do: 182 183 if (pci_pme_capable(il->pci_dev, PCI_D3cold)) 184 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, 185 APMG_PS_CTRL_VAL_PWR_SRC_VAUX, 186 ~APMG_PS_CTRL_MSK_PWR_SRC); 187 */ 188 189 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, 190 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, 191 ~APMG_PS_CTRL_MSK_PWR_SRC); 192 } 193 194 int 195 il4965_hw_nic_init(struct il_priv *il) 196 { 197 unsigned long flags; 198 struct il_rx_queue *rxq = &il->rxq; 199 int ret; 200 201 spin_lock_irqsave(&il->lock, flags); 202 il_apm_init(il); 203 /* Set interrupt coalescing calibration timer to default (512 usecs) */ 204 il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF); 205 spin_unlock_irqrestore(&il->lock, flags); 206 207 il4965_set_pwr_vmain(il); 208 il4965_nic_config(il); 209 210 /* Allocate the RX queue, or reset if it is already allocated */ 211 if (!rxq->bd) { 212 ret = il_rx_queue_alloc(il); 213 if (ret) { 214 IL_ERR("Unable to initialize Rx queue\n"); 215 return -ENOMEM; 216 } 217 } else 218 il4965_rx_queue_reset(il, rxq); 219 220 il4965_rx_replenish(il); 221 222 il4965_rx_init(il, rxq); 223 224 spin_lock_irqsave(&il->lock, flags); 225 226 rxq->need_update = 1; 227 il_rx_queue_update_write_ptr(il, rxq); 228 229 spin_unlock_irqrestore(&il->lock, flags); 230 231 /* Allocate or reset and init all Tx and Command queues */ 232 if (!il->txq) { 233 ret = il4965_txq_ctx_alloc(il); 234 if (ret) 235 return ret; 236 } else 237 il4965_txq_ctx_reset(il); 238 239 set_bit(S_INIT, &il->status); 240 241 return 0; 242 } 243 244 /** 245 * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr 246 */ 247 static inline __le32 248 il4965_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr) 249 { 250 return cpu_to_le32((u32) (dma_addr >> 8)); 251 } 252 253 /** 254 * il4965_rx_queue_restock - refill RX queue from pre-allocated pool 255 * 256 * If there are slots in the RX queue that need to be restocked, 257 * and we have free pre-allocated buffers, fill the ranks as much 258 * as we can, pulling from rx_free. 259 * 260 * This moves the 'write' idx forward to catch up with 'processed', and 261 * also updates the memory address in the firmware to reference the new 262 * target buffer. 263 */ 264 void 265 il4965_rx_queue_restock(struct il_priv *il) 266 { 267 struct il_rx_queue *rxq = &il->rxq; 268 struct list_head *element; 269 struct il_rx_buf *rxb; 270 unsigned long flags; 271 272 spin_lock_irqsave(&rxq->lock, flags); 273 while (il_rx_queue_space(rxq) > 0 && rxq->free_count) { 274 /* The overwritten rxb must be a used one */ 275 rxb = rxq->queue[rxq->write]; 276 BUG_ON(rxb && rxb->page); 277 278 /* Get next free Rx buffer, remove from free list */ 279 element = rxq->rx_free.next; 280 rxb = list_entry(element, struct il_rx_buf, list); 281 list_del(element); 282 283 /* Point to Rx buffer via next RBD in circular buffer */ 284 rxq->bd[rxq->write] = 285 il4965_dma_addr2rbd_ptr(il, rxb->page_dma); 286 rxq->queue[rxq->write] = rxb; 287 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; 288 rxq->free_count--; 289 } 290 spin_unlock_irqrestore(&rxq->lock, flags); 291 /* If the pre-allocated buffer pool is dropping low, schedule to 292 * refill it */ 293 if (rxq->free_count <= RX_LOW_WATERMARK) 294 queue_work(il->workqueue, &il->rx_replenish); 295 296 /* If we've added more space for the firmware to place data, tell it. 297 * Increment device's write pointer in multiples of 8. */ 298 if (rxq->write_actual != (rxq->write & ~0x7)) { 299 spin_lock_irqsave(&rxq->lock, flags); 300 rxq->need_update = 1; 301 spin_unlock_irqrestore(&rxq->lock, flags); 302 il_rx_queue_update_write_ptr(il, rxq); 303 } 304 } 305 306 /** 307 * il4965_rx_replenish - Move all used packet from rx_used to rx_free 308 * 309 * When moving to rx_free an SKB is allocated for the slot. 310 * 311 * Also restock the Rx queue via il_rx_queue_restock. 312 * This is called as a scheduled work item (except for during initialization) 313 */ 314 static void 315 il4965_rx_allocate(struct il_priv *il, gfp_t priority) 316 { 317 struct il_rx_queue *rxq = &il->rxq; 318 struct list_head *element; 319 struct il_rx_buf *rxb; 320 struct page *page; 321 dma_addr_t page_dma; 322 unsigned long flags; 323 gfp_t gfp_mask = priority; 324 325 while (1) { 326 spin_lock_irqsave(&rxq->lock, flags); 327 if (list_empty(&rxq->rx_used)) { 328 spin_unlock_irqrestore(&rxq->lock, flags); 329 return; 330 } 331 spin_unlock_irqrestore(&rxq->lock, flags); 332 333 if (rxq->free_count > RX_LOW_WATERMARK) 334 gfp_mask |= __GFP_NOWARN; 335 336 if (il->hw_params.rx_page_order > 0) 337 gfp_mask |= __GFP_COMP; 338 339 /* Alloc a new receive buffer */ 340 page = alloc_pages(gfp_mask, il->hw_params.rx_page_order); 341 if (!page) { 342 if (net_ratelimit()) 343 D_INFO("alloc_pages failed, " "order: %d\n", 344 il->hw_params.rx_page_order); 345 346 if (rxq->free_count <= RX_LOW_WATERMARK && 347 net_ratelimit()) 348 IL_ERR("Failed to alloc_pages with %s. " 349 "Only %u free buffers remaining.\n", 350 priority == 351 GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", 352 rxq->free_count); 353 /* We don't reschedule replenish work here -- we will 354 * call the restock method and if it still needs 355 * more buffers it will schedule replenish */ 356 return; 357 } 358 359 /* Get physical address of the RB */ 360 page_dma = 361 pci_map_page(il->pci_dev, page, 0, 362 PAGE_SIZE << il->hw_params.rx_page_order, 363 PCI_DMA_FROMDEVICE); 364 if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) { 365 __free_pages(page, il->hw_params.rx_page_order); 366 break; 367 } 368 369 spin_lock_irqsave(&rxq->lock, flags); 370 371 if (list_empty(&rxq->rx_used)) { 372 spin_unlock_irqrestore(&rxq->lock, flags); 373 pci_unmap_page(il->pci_dev, page_dma, 374 PAGE_SIZE << il->hw_params.rx_page_order, 375 PCI_DMA_FROMDEVICE); 376 __free_pages(page, il->hw_params.rx_page_order); 377 return; 378 } 379 380 element = rxq->rx_used.next; 381 rxb = list_entry(element, struct il_rx_buf, list); 382 list_del(element); 383 384 BUG_ON(rxb->page); 385 386 rxb->page = page; 387 rxb->page_dma = page_dma; 388 list_add_tail(&rxb->list, &rxq->rx_free); 389 rxq->free_count++; 390 il->alloc_rxb_page++; 391 392 spin_unlock_irqrestore(&rxq->lock, flags); 393 } 394 } 395 396 void 397 il4965_rx_replenish(struct il_priv *il) 398 { 399 unsigned long flags; 400 401 il4965_rx_allocate(il, GFP_KERNEL); 402 403 spin_lock_irqsave(&il->lock, flags); 404 il4965_rx_queue_restock(il); 405 spin_unlock_irqrestore(&il->lock, flags); 406 } 407 408 void 409 il4965_rx_replenish_now(struct il_priv *il) 410 { 411 il4965_rx_allocate(il, GFP_ATOMIC); 412 413 il4965_rx_queue_restock(il); 414 } 415 416 /* Assumes that the skb field of the buffers in 'pool' is kept accurate. 417 * If an SKB has been detached, the POOL needs to have its SKB set to NULL 418 * This free routine walks the list of POOL entries and if SKB is set to 419 * non NULL it is unmapped and freed 420 */ 421 void 422 il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq) 423 { 424 int i; 425 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { 426 if (rxq->pool[i].page != NULL) { 427 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, 428 PAGE_SIZE << il->hw_params.rx_page_order, 429 PCI_DMA_FROMDEVICE); 430 __il_free_pages(il, rxq->pool[i].page); 431 rxq->pool[i].page = NULL; 432 } 433 } 434 435 dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, 436 rxq->bd_dma); 437 dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status), 438 rxq->rb_stts, rxq->rb_stts_dma); 439 rxq->bd = NULL; 440 rxq->rb_stts = NULL; 441 } 442 443 int 444 il4965_rxq_stop(struct il_priv *il) 445 { 446 int ret; 447 448 _il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); 449 ret = _il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG, 450 FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 451 FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 452 1000); 453 if (ret < 0) 454 IL_ERR("Can't stop Rx DMA.\n"); 455 456 return 0; 457 } 458 459 int 460 il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum nl80211_band band) 461 { 462 int idx = 0; 463 int band_offset = 0; 464 465 /* HT rate format: mac80211 wants an MCS number, which is just LSB */ 466 if (rate_n_flags & RATE_MCS_HT_MSK) { 467 idx = (rate_n_flags & 0xff); 468 return idx; 469 /* Legacy rate format, search for match in table */ 470 } else { 471 if (band == NL80211_BAND_5GHZ) 472 band_offset = IL_FIRST_OFDM_RATE; 473 for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++) 474 if (il_rates[idx].plcp == (rate_n_flags & 0xFF)) 475 return idx - band_offset; 476 } 477 478 return -1; 479 } 480 481 static int 482 il4965_calc_rssi(struct il_priv *il, struct il_rx_phy_res *rx_resp) 483 { 484 /* data from PHY/DSP regarding signal strength, etc., 485 * contents are always there, not configurable by host. */ 486 struct il4965_rx_non_cfg_phy *ncphy = 487 (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; 488 u32 agc = 489 (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK) >> 490 IL49_AGC_DB_POS; 491 492 u32 valid_antennae = 493 (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK) 494 >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; 495 u8 max_rssi = 0; 496 u32 i; 497 498 /* Find max rssi among 3 possible receivers. 499 * These values are measured by the digital signal processor (DSP). 500 * They should stay fairly constant even as the signal strength varies, 501 * if the radio's automatic gain control (AGC) is working right. 502 * AGC value (see below) will provide the "interesting" info. */ 503 for (i = 0; i < 3; i++) 504 if (valid_antennae & (1 << i)) 505 max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); 506 507 D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", 508 ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], 509 max_rssi, agc); 510 511 /* dBm = max_rssi dB - agc dB - constant. 512 * Higher AGC (higher radio gain) means lower signal. */ 513 return max_rssi - agc - IL4965_RSSI_OFFSET; 514 } 515 516 static u32 517 il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in) 518 { 519 u32 decrypt_out = 0; 520 521 if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == 522 RX_RES_STATUS_STATION_FOUND) 523 decrypt_out |= 524 (RX_RES_STATUS_STATION_FOUND | 525 RX_RES_STATUS_NO_STATION_INFO_MISMATCH); 526 527 decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); 528 529 /* packet was not encrypted */ 530 if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == 531 RX_RES_STATUS_SEC_TYPE_NONE) 532 return decrypt_out; 533 534 /* packet was encrypted with unknown alg */ 535 if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == 536 RX_RES_STATUS_SEC_TYPE_ERR) 537 return decrypt_out; 538 539 /* decryption was not done in HW */ 540 if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != 541 RX_MPDU_RES_STATUS_DEC_DONE_MSK) 542 return decrypt_out; 543 544 switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { 545 546 case RX_RES_STATUS_SEC_TYPE_CCMP: 547 /* alg is CCM: check MIC only */ 548 if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) 549 /* Bad MIC */ 550 decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; 551 else 552 decrypt_out |= RX_RES_STATUS_DECRYPT_OK; 553 554 break; 555 556 case RX_RES_STATUS_SEC_TYPE_TKIP: 557 if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { 558 /* Bad TTAK */ 559 decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; 560 break; 561 } 562 /* fall through if TTAK OK */ 563 default: 564 if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) 565 decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; 566 else 567 decrypt_out |= RX_RES_STATUS_DECRYPT_OK; 568 break; 569 } 570 571 D_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", decrypt_in, decrypt_out); 572 573 return decrypt_out; 574 } 575 576 #define SMALL_PACKET_SIZE 256 577 578 static void 579 il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr, 580 u32 len, u32 ampdu_status, struct il_rx_buf *rxb, 581 struct ieee80211_rx_status *stats) 582 { 583 struct sk_buff *skb; 584 __le16 fc = hdr->frame_control; 585 586 /* We only process data packets if the interface is open */ 587 if (unlikely(!il->is_open)) { 588 D_DROP("Dropping packet while interface is not open.\n"); 589 return; 590 } 591 592 if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { 593 il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); 594 D_INFO("Woke queues - frame received on passive channel\n"); 595 } 596 597 /* In case of HW accelerated crypto and bad decryption, drop */ 598 if (!il->cfg->mod_params->sw_crypto && 599 il_set_decrypted_flag(il, hdr, ampdu_status, stats)) 600 return; 601 602 skb = dev_alloc_skb(SMALL_PACKET_SIZE); 603 if (!skb) { 604 IL_ERR("dev_alloc_skb failed\n"); 605 return; 606 } 607 608 if (len <= SMALL_PACKET_SIZE) { 609 skb_put_data(skb, hdr, len); 610 } else { 611 skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), 612 len, PAGE_SIZE << il->hw_params.rx_page_order); 613 il->alloc_rxb_page--; 614 rxb->page = NULL; 615 } 616 617 il_update_stats(il, false, fc, len); 618 memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); 619 620 ieee80211_rx(il->hw, skb); 621 } 622 623 /* Called for N_RX (legacy ABG frames), or 624 * N_RX_MPDU (HT high-throughput N frames). */ 625 static void 626 il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) 627 { 628 struct ieee80211_hdr *header; 629 struct ieee80211_rx_status rx_status = {}; 630 struct il_rx_pkt *pkt = rxb_addr(rxb); 631 struct il_rx_phy_res *phy_res; 632 __le32 rx_pkt_status; 633 struct il_rx_mpdu_res_start *amsdu; 634 u32 len; 635 u32 ampdu_status; 636 u32 rate_n_flags; 637 638 /** 639 * N_RX and N_RX_MPDU are handled differently. 640 * N_RX: physical layer info is in this buffer 641 * N_RX_MPDU: physical layer info was sent in separate 642 * command and cached in il->last_phy_res 643 * 644 * Here we set up local variables depending on which command is 645 * received. 646 */ 647 if (pkt->hdr.cmd == N_RX) { 648 phy_res = (struct il_rx_phy_res *)pkt->u.raw; 649 header = 650 (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) + 651 phy_res->cfg_phy_cnt); 652 653 len = le16_to_cpu(phy_res->byte_count); 654 rx_pkt_status = 655 *(__le32 *) (pkt->u.raw + sizeof(*phy_res) + 656 phy_res->cfg_phy_cnt + len); 657 ampdu_status = le32_to_cpu(rx_pkt_status); 658 } else { 659 if (!il->_4965.last_phy_res_valid) { 660 IL_ERR("MPDU frame without cached PHY data\n"); 661 return; 662 } 663 phy_res = &il->_4965.last_phy_res; 664 amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw; 665 header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu)); 666 len = le16_to_cpu(amsdu->byte_count); 667 rx_pkt_status = *(__le32 *) (pkt->u.raw + sizeof(*amsdu) + len); 668 ampdu_status = 669 il4965_translate_rx_status(il, le32_to_cpu(rx_pkt_status)); 670 } 671 672 if ((unlikely(phy_res->cfg_phy_cnt > 20))) { 673 D_DROP("dsp size out of range [0,20]: %d\n", 674 phy_res->cfg_phy_cnt); 675 return; 676 } 677 678 if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || 679 !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { 680 D_RX("Bad CRC or FIFO: 0x%08X.\n", le32_to_cpu(rx_pkt_status)); 681 return; 682 } 683 684 /* This will be used in several places later */ 685 rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); 686 687 /* rx_status carries information about the packet to mac80211 */ 688 rx_status.mactime = le64_to_cpu(phy_res->timestamp); 689 rx_status.band = 690 (phy_res-> 691 phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? NL80211_BAND_2GHZ : 692 NL80211_BAND_5GHZ; 693 rx_status.freq = 694 ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), 695 rx_status.band); 696 rx_status.rate_idx = 697 il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); 698 rx_status.flag = 0; 699 700 /* TSF isn't reliable. In order to allow smooth user experience, 701 * this W/A doesn't propagate it to the mac80211 */ 702 /*rx_status.flag |= RX_FLAG_MACTIME_START; */ 703 704 il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); 705 706 /* Find max signal strength (dBm) among 3 antenna/receiver chains */ 707 rx_status.signal = il4965_calc_rssi(il, phy_res); 708 709 D_STATS("Rssi %d, TSF %llu\n", rx_status.signal, 710 (unsigned long long)rx_status.mactime); 711 712 /* 713 * "antenna number" 714 * 715 * It seems that the antenna field in the phy flags value 716 * is actually a bit field. This is undefined by radiotap, 717 * it wants an actual antenna number but I always get "7" 718 * for most legacy frames I receive indicating that the 719 * same frame was received on all three RX chains. 720 * 721 * I think this field should be removed in favor of a 722 * new 802.11n radiotap field "RX chains" that is defined 723 * as a bitmask. 724 */ 725 rx_status.antenna = 726 (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 727 RX_RES_PHY_FLAGS_ANTENNA_POS; 728 729 /* set the preamble flag if appropriate */ 730 if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) 731 rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE; 732 733 /* Set up the HT phy flags */ 734 if (rate_n_flags & RATE_MCS_HT_MSK) 735 rx_status.encoding = RX_ENC_HT; 736 if (rate_n_flags & RATE_MCS_HT40_MSK) 737 rx_status.bw = RATE_INFO_BW_40; 738 else 739 rx_status.bw = RATE_INFO_BW_20; 740 if (rate_n_flags & RATE_MCS_SGI_MSK) 741 rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI; 742 743 if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) { 744 /* We know which subframes of an A-MPDU belong 745 * together since we get a single PHY response 746 * from the firmware for all of them. 747 */ 748 749 rx_status.flag |= RX_FLAG_AMPDU_DETAILS; 750 rx_status.ampdu_reference = il->_4965.ampdu_ref; 751 } 752 753 il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb, 754 &rx_status); 755 } 756 757 /* Cache phy data (Rx signal strength, etc) for HT frame (N_RX_PHY). 758 * This will be used later in il_hdl_rx() for N_RX_MPDU. */ 759 static void 760 il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb) 761 { 762 struct il_rx_pkt *pkt = rxb_addr(rxb); 763 il->_4965.last_phy_res_valid = true; 764 il->_4965.ampdu_ref++; 765 memcpy(&il->_4965.last_phy_res, pkt->u.raw, 766 sizeof(struct il_rx_phy_res)); 767 } 768 769 static int 770 il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif, 771 enum nl80211_band band, u8 is_active, 772 u8 n_probes, struct il_scan_channel *scan_ch) 773 { 774 struct ieee80211_channel *chan; 775 const struct ieee80211_supported_band *sband; 776 const struct il_channel_info *ch_info; 777 u16 passive_dwell = 0; 778 u16 active_dwell = 0; 779 int added, i; 780 u16 channel; 781 782 sband = il_get_hw_mode(il, band); 783 if (!sband) 784 return 0; 785 786 active_dwell = il_get_active_dwell_time(il, band, n_probes); 787 passive_dwell = il_get_passive_dwell_time(il, band, vif); 788 789 if (passive_dwell <= active_dwell) 790 passive_dwell = active_dwell + 1; 791 792 for (i = 0, added = 0; i < il->scan_request->n_channels; i++) { 793 chan = il->scan_request->channels[i]; 794 795 if (chan->band != band) 796 continue; 797 798 channel = chan->hw_value; 799 scan_ch->channel = cpu_to_le16(channel); 800 801 ch_info = il_get_channel_info(il, band, channel); 802 if (!il_is_channel_valid(ch_info)) { 803 D_SCAN("Channel %d is INVALID for this band.\n", 804 channel); 805 continue; 806 } 807 808 if (!is_active || il_is_channel_passive(ch_info) || 809 (chan->flags & IEEE80211_CHAN_NO_IR)) 810 scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; 811 else 812 scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; 813 814 if (n_probes) 815 scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes); 816 817 scan_ch->active_dwell = cpu_to_le16(active_dwell); 818 scan_ch->passive_dwell = cpu_to_le16(passive_dwell); 819 820 /* Set txpower levels to defaults */ 821 scan_ch->dsp_atten = 110; 822 823 /* NOTE: if we were doing 6Mb OFDM for scans we'd use 824 * power level: 825 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; 826 */ 827 if (band == NL80211_BAND_5GHZ) 828 scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; 829 else 830 scan_ch->tx_gain = ((1 << 5) | (5 << 3)); 831 832 D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", channel, 833 le32_to_cpu(scan_ch->type), 834 (scan_ch-> 835 type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE", 836 (scan_ch-> 837 type & SCAN_CHANNEL_TYPE_ACTIVE) ? active_dwell : 838 passive_dwell); 839 840 scan_ch++; 841 added++; 842 } 843 844 D_SCAN("total channels to scan %d\n", added); 845 return added; 846 } 847 848 static void 849 il4965_toggle_tx_ant(struct il_priv *il, u8 *ant, u8 valid) 850 { 851 int i; 852 u8 ind = *ant; 853 854 for (i = 0; i < RATE_ANT_NUM - 1; i++) { 855 ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; 856 if (valid & BIT(ind)) { 857 *ant = ind; 858 return; 859 } 860 } 861 } 862 863 int 864 il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif) 865 { 866 struct il_host_cmd cmd = { 867 .id = C_SCAN, 868 .len = sizeof(struct il_scan_cmd), 869 .flags = CMD_SIZE_HUGE, 870 }; 871 struct il_scan_cmd *scan; 872 u32 rate_flags = 0; 873 u16 cmd_len; 874 u16 rx_chain = 0; 875 enum nl80211_band band; 876 u8 n_probes = 0; 877 u8 rx_ant = il->hw_params.valid_rx_ant; 878 u8 rate; 879 bool is_active = false; 880 int chan_mod; 881 u8 active_chains; 882 u8 scan_tx_antennas = il->hw_params.valid_tx_ant; 883 int ret; 884 885 lockdep_assert_held(&il->mutex); 886 887 if (!il->scan_cmd) { 888 il->scan_cmd = 889 kmalloc(sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE, 890 GFP_KERNEL); 891 if (!il->scan_cmd) { 892 D_SCAN("fail to allocate memory for scan\n"); 893 return -ENOMEM; 894 } 895 } 896 scan = il->scan_cmd; 897 memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE); 898 899 scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH; 900 scan->quiet_time = IL_ACTIVE_QUIET_TIME; 901 902 if (il_is_any_associated(il)) { 903 u16 interval; 904 u32 extra; 905 u32 suspend_time = 100; 906 u32 scan_suspend_time = 100; 907 908 D_INFO("Scanning while associated...\n"); 909 interval = vif->bss_conf.beacon_int; 910 911 scan->suspend_time = 0; 912 scan->max_out_time = cpu_to_le32(200 * 1024); 913 if (!interval) 914 interval = suspend_time; 915 916 extra = (suspend_time / interval) << 22; 917 scan_suspend_time = 918 (extra | ((suspend_time % interval) * 1024)); 919 scan->suspend_time = cpu_to_le32(scan_suspend_time); 920 D_SCAN("suspend_time 0x%X beacon interval %d\n", 921 scan_suspend_time, interval); 922 } 923 924 if (il->scan_request->n_ssids) { 925 int i, p = 0; 926 D_SCAN("Kicking off active scan\n"); 927 for (i = 0; i < il->scan_request->n_ssids; i++) { 928 /* always does wildcard anyway */ 929 if (!il->scan_request->ssids[i].ssid_len) 930 continue; 931 scan->direct_scan[p].id = WLAN_EID_SSID; 932 scan->direct_scan[p].len = 933 il->scan_request->ssids[i].ssid_len; 934 memcpy(scan->direct_scan[p].ssid, 935 il->scan_request->ssids[i].ssid, 936 il->scan_request->ssids[i].ssid_len); 937 n_probes++; 938 p++; 939 } 940 is_active = true; 941 } else 942 D_SCAN("Start passive scan.\n"); 943 944 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; 945 scan->tx_cmd.sta_id = il->hw_params.bcast_id; 946 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 947 948 switch (il->scan_band) { 949 case NL80211_BAND_2GHZ: 950 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; 951 chan_mod = 952 le32_to_cpu(il->active.flags & RXON_FLG_CHANNEL_MODE_MSK) >> 953 RXON_FLG_CHANNEL_MODE_POS; 954 if (chan_mod == CHANNEL_MODE_PURE_40) { 955 rate = RATE_6M_PLCP; 956 } else { 957 rate = RATE_1M_PLCP; 958 rate_flags = RATE_MCS_CCK_MSK; 959 } 960 break; 961 case NL80211_BAND_5GHZ: 962 rate = RATE_6M_PLCP; 963 break; 964 default: 965 IL_WARN("Invalid scan band\n"); 966 return -EIO; 967 } 968 969 /* 970 * If active scanning is requested but a certain channel is 971 * marked passive, we can do active scanning if we detect 972 * transmissions. 973 * 974 * There is an issue with some firmware versions that triggers 975 * a sysassert on a "good CRC threshold" of zero (== disabled), 976 * on a radar channel even though this means that we should NOT 977 * send probes. 978 * 979 * The "good CRC threshold" is the number of frames that we 980 * need to receive during our dwell time on a channel before 981 * sending out probes -- setting this to a huge value will 982 * mean we never reach it, but at the same time work around 983 * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER 984 * here instead of IL_GOOD_CRC_TH_DISABLED. 985 */ 986 scan->good_CRC_th = 987 is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER; 988 989 band = il->scan_band; 990 991 if (il->cfg->scan_rx_antennas[band]) 992 rx_ant = il->cfg->scan_rx_antennas[band]; 993 994 il4965_toggle_tx_ant(il, &il->scan_tx_ant[band], scan_tx_antennas); 995 rate_flags |= BIT(il->scan_tx_ant[band]) << RATE_MCS_ANT_POS; 996 scan->tx_cmd.rate_n_flags = cpu_to_le32(rate | rate_flags); 997 998 /* In power save mode use one chain, otherwise use all chains */ 999 if (test_bit(S_POWER_PMI, &il->status)) { 1000 /* rx_ant has been set to all valid chains previously */ 1001 active_chains = 1002 rx_ant & ((u8) (il->chain_noise_data.active_chains)); 1003 if (!active_chains) 1004 active_chains = rx_ant; 1005 1006 D_SCAN("chain_noise_data.active_chains: %u\n", 1007 il->chain_noise_data.active_chains); 1008 1009 rx_ant = il4965_first_antenna(active_chains); 1010 } 1011 1012 /* MIMO is not used here, but value is required */ 1013 rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; 1014 rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; 1015 rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; 1016 rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; 1017 scan->rx_chain = cpu_to_le16(rx_chain); 1018 1019 cmd_len = 1020 il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data, 1021 vif->addr, il->scan_request->ie, 1022 il->scan_request->ie_len, 1023 IL_MAX_SCAN_SIZE - sizeof(*scan)); 1024 scan->tx_cmd.len = cpu_to_le16(cmd_len); 1025 1026 scan->filter_flags |= 1027 (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK); 1028 1029 scan->channel_count = 1030 il4965_get_channels_for_scan(il, vif, band, is_active, n_probes, 1031 (void *)&scan->data[cmd_len]); 1032 if (scan->channel_count == 0) { 1033 D_SCAN("channel count %d\n", scan->channel_count); 1034 return -EIO; 1035 } 1036 1037 cmd.len += 1038 le16_to_cpu(scan->tx_cmd.len) + 1039 scan->channel_count * sizeof(struct il_scan_channel); 1040 cmd.data = scan; 1041 scan->len = cpu_to_le16(cmd.len); 1042 1043 set_bit(S_SCAN_HW, &il->status); 1044 1045 ret = il_send_cmd_sync(il, &cmd); 1046 if (ret) 1047 clear_bit(S_SCAN_HW, &il->status); 1048 1049 return ret; 1050 } 1051 1052 int 1053 il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, 1054 bool add) 1055 { 1056 struct il_vif_priv *vif_priv = (void *)vif->drv_priv; 1057 1058 if (add) 1059 return il4965_add_bssid_station(il, vif->bss_conf.bssid, 1060 &vif_priv->ibss_bssid_sta_id); 1061 return il_remove_station(il, vif_priv->ibss_bssid_sta_id, 1062 vif->bss_conf.bssid); 1063 } 1064 1065 void 1066 il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, int freed) 1067 { 1068 lockdep_assert_held(&il->sta_lock); 1069 1070 if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed) 1071 il->stations[sta_id].tid[tid].tfds_in_queue -= freed; 1072 else { 1073 D_TX("free more than tfds_in_queue (%u:%d)\n", 1074 il->stations[sta_id].tid[tid].tfds_in_queue, freed); 1075 il->stations[sta_id].tid[tid].tfds_in_queue = 0; 1076 } 1077 } 1078 1079 #define IL_TX_QUEUE_MSK 0xfffff 1080 1081 static bool 1082 il4965_is_single_rx_stream(struct il_priv *il) 1083 { 1084 return il->current_ht_config.smps == IEEE80211_SMPS_STATIC || 1085 il->current_ht_config.single_chain_sufficient; 1086 } 1087 1088 #define IL_NUM_RX_CHAINS_MULTIPLE 3 1089 #define IL_NUM_RX_CHAINS_SINGLE 2 1090 #define IL_NUM_IDLE_CHAINS_DUAL 2 1091 #define IL_NUM_IDLE_CHAINS_SINGLE 1 1092 1093 /* 1094 * Determine how many receiver/antenna chains to use. 1095 * 1096 * More provides better reception via diversity. Fewer saves power 1097 * at the expense of throughput, but only when not in powersave to 1098 * start with. 1099 * 1100 * MIMO (dual stream) requires at least 2, but works better with 3. 1101 * This does not determine *which* chains to use, just how many. 1102 */ 1103 static int 1104 il4965_get_active_rx_chain_count(struct il_priv *il) 1105 { 1106 /* # of Rx chains to use when expecting MIMO. */ 1107 if (il4965_is_single_rx_stream(il)) 1108 return IL_NUM_RX_CHAINS_SINGLE; 1109 else 1110 return IL_NUM_RX_CHAINS_MULTIPLE; 1111 } 1112 1113 /* 1114 * When we are in power saving mode, unless device support spatial 1115 * multiplexing power save, use the active count for rx chain count. 1116 */ 1117 static int 1118 il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt) 1119 { 1120 /* # Rx chains when idling, depending on SMPS mode */ 1121 switch (il->current_ht_config.smps) { 1122 case IEEE80211_SMPS_STATIC: 1123 case IEEE80211_SMPS_DYNAMIC: 1124 return IL_NUM_IDLE_CHAINS_SINGLE; 1125 case IEEE80211_SMPS_OFF: 1126 return active_cnt; 1127 default: 1128 WARN(1, "invalid SMPS mode %d", il->current_ht_config.smps); 1129 return active_cnt; 1130 } 1131 } 1132 1133 /* up to 4 chains */ 1134 static u8 1135 il4965_count_chain_bitmap(u32 chain_bitmap) 1136 { 1137 u8 res; 1138 res = (chain_bitmap & BIT(0)) >> 0; 1139 res += (chain_bitmap & BIT(1)) >> 1; 1140 res += (chain_bitmap & BIT(2)) >> 2; 1141 res += (chain_bitmap & BIT(3)) >> 3; 1142 return res; 1143 } 1144 1145 /** 1146 * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image 1147 * 1148 * Selects how many and which Rx receivers/antennas/chains to use. 1149 * This should not be used for scan command ... it puts data in wrong place. 1150 */ 1151 void 1152 il4965_set_rxon_chain(struct il_priv *il) 1153 { 1154 bool is_single = il4965_is_single_rx_stream(il); 1155 bool is_cam = !test_bit(S_POWER_PMI, &il->status); 1156 u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; 1157 u32 active_chains; 1158 u16 rx_chain; 1159 1160 /* Tell uCode which antennas are actually connected. 1161 * Before first association, we assume all antennas are connected. 1162 * Just after first association, il4965_chain_noise_calibration() 1163 * checks which antennas actually *are* connected. */ 1164 if (il->chain_noise_data.active_chains) 1165 active_chains = il->chain_noise_data.active_chains; 1166 else 1167 active_chains = il->hw_params.valid_rx_ant; 1168 1169 rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; 1170 1171 /* How many receivers should we use? */ 1172 active_rx_cnt = il4965_get_active_rx_chain_count(il); 1173 idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt); 1174 1175 /* correct rx chain count according hw settings 1176 * and chain noise calibration 1177 */ 1178 valid_rx_cnt = il4965_count_chain_bitmap(active_chains); 1179 if (valid_rx_cnt < active_rx_cnt) 1180 active_rx_cnt = valid_rx_cnt; 1181 1182 if (valid_rx_cnt < idle_rx_cnt) 1183 idle_rx_cnt = valid_rx_cnt; 1184 1185 rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; 1186 rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; 1187 1188 il->staging.rx_chain = cpu_to_le16(rx_chain); 1189 1190 if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam) 1191 il->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; 1192 else 1193 il->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; 1194 1195 D_ASSOC("rx_chain=0x%X active=%d idle=%d\n", il->staging.rx_chain, 1196 active_rx_cnt, idle_rx_cnt); 1197 1198 WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || 1199 active_rx_cnt < idle_rx_cnt); 1200 } 1201 1202 static const char * 1203 il4965_get_fh_string(int cmd) 1204 { 1205 switch (cmd) { 1206 IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG); 1207 IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG); 1208 IL_CMD(FH49_RSCSR_CHNL0_WPTR); 1209 IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG); 1210 IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG); 1211 IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG); 1212 IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); 1213 IL_CMD(FH49_TSSR_TX_STATUS_REG); 1214 IL_CMD(FH49_TSSR_TX_ERROR_REG); 1215 default: 1216 return "UNKNOWN"; 1217 } 1218 } 1219 1220 int 1221 il4965_dump_fh(struct il_priv *il, char **buf, bool display) 1222 { 1223 int i; 1224 #ifdef CONFIG_IWLEGACY_DEBUG 1225 int pos = 0; 1226 size_t bufsz = 0; 1227 #endif 1228 static const u32 fh_tbl[] = { 1229 FH49_RSCSR_CHNL0_STTS_WPTR_REG, 1230 FH49_RSCSR_CHNL0_RBDCB_BASE_REG, 1231 FH49_RSCSR_CHNL0_WPTR, 1232 FH49_MEM_RCSR_CHNL0_CONFIG_REG, 1233 FH49_MEM_RSSR_SHARED_CTRL_REG, 1234 FH49_MEM_RSSR_RX_STATUS_REG, 1235 FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, 1236 FH49_TSSR_TX_STATUS_REG, 1237 FH49_TSSR_TX_ERROR_REG 1238 }; 1239 #ifdef CONFIG_IWLEGACY_DEBUG 1240 if (display) { 1241 bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; 1242 *buf = kmalloc(bufsz, GFP_KERNEL); 1243 if (!*buf) 1244 return -ENOMEM; 1245 pos += 1246 scnprintf(*buf + pos, bufsz - pos, "FH register values:\n"); 1247 for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { 1248 pos += 1249 scnprintf(*buf + pos, bufsz - pos, 1250 " %34s: 0X%08x\n", 1251 il4965_get_fh_string(fh_tbl[i]), 1252 il_rd(il, fh_tbl[i])); 1253 } 1254 return pos; 1255 } 1256 #endif 1257 IL_ERR("FH register values:\n"); 1258 for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { 1259 IL_ERR(" %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]), 1260 il_rd(il, fh_tbl[i])); 1261 } 1262 return 0; 1263 } 1264 1265 static void 1266 il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb) 1267 { 1268 struct il_rx_pkt *pkt = rxb_addr(rxb); 1269 struct il_missed_beacon_notif *missed_beacon; 1270 1271 missed_beacon = &pkt->u.missed_beacon; 1272 if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) > 1273 il->missed_beacon_threshold) { 1274 D_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n", 1275 le32_to_cpu(missed_beacon->consecutive_missed_beacons), 1276 le32_to_cpu(missed_beacon->total_missed_becons), 1277 le32_to_cpu(missed_beacon->num_recvd_beacons), 1278 le32_to_cpu(missed_beacon->num_expected_beacons)); 1279 if (!test_bit(S_SCANNING, &il->status)) 1280 il4965_init_sensitivity(il); 1281 } 1282 } 1283 1284 /* Calculate noise level, based on measurements during network silence just 1285 * before arriving beacon. This measurement can be done only if we know 1286 * exactly when to expect beacons, therefore only when we're associated. */ 1287 static void 1288 il4965_rx_calc_noise(struct il_priv *il) 1289 { 1290 struct stats_rx_non_phy *rx_info; 1291 int num_active_rx = 0; 1292 int total_silence = 0; 1293 int bcn_silence_a, bcn_silence_b, bcn_silence_c; 1294 int last_rx_noise; 1295 1296 rx_info = &(il->_4965.stats.rx.general); 1297 bcn_silence_a = 1298 le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; 1299 bcn_silence_b = 1300 le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; 1301 bcn_silence_c = 1302 le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; 1303 1304 if (bcn_silence_a) { 1305 total_silence += bcn_silence_a; 1306 num_active_rx++; 1307 } 1308 if (bcn_silence_b) { 1309 total_silence += bcn_silence_b; 1310 num_active_rx++; 1311 } 1312 if (bcn_silence_c) { 1313 total_silence += bcn_silence_c; 1314 num_active_rx++; 1315 } 1316 1317 /* Average among active antennas */ 1318 if (num_active_rx) 1319 last_rx_noise = (total_silence / num_active_rx) - 107; 1320 else 1321 last_rx_noise = IL_NOISE_MEAS_NOT_AVAILABLE; 1322 1323 D_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", bcn_silence_a, 1324 bcn_silence_b, bcn_silence_c, last_rx_noise); 1325 } 1326 1327 #ifdef CONFIG_IWLEGACY_DEBUGFS 1328 /* 1329 * based on the assumption of all stats counter are in DWORD 1330 * FIXME: This function is for debugging, do not deal with 1331 * the case of counters roll-over. 1332 */ 1333 static void 1334 il4965_accumulative_stats(struct il_priv *il, __le32 * stats) 1335 { 1336 int i, size; 1337 __le32 *prev_stats; 1338 u32 *accum_stats; 1339 u32 *delta, *max_delta; 1340 struct stats_general_common *general, *accum_general; 1341 struct stats_tx *tx, *accum_tx; 1342 1343 prev_stats = (__le32 *) &il->_4965.stats; 1344 accum_stats = (u32 *) &il->_4965.accum_stats; 1345 size = sizeof(struct il_notif_stats); 1346 general = &il->_4965.stats.general.common; 1347 accum_general = &il->_4965.accum_stats.general.common; 1348 tx = &il->_4965.stats.tx; 1349 accum_tx = &il->_4965.accum_stats.tx; 1350 delta = (u32 *) &il->_4965.delta_stats; 1351 max_delta = (u32 *) &il->_4965.max_delta; 1352 1353 for (i = sizeof(__le32); i < size; 1354 i += 1355 sizeof(__le32), stats++, prev_stats++, delta++, max_delta++, 1356 accum_stats++) { 1357 if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { 1358 *delta = 1359 (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats)); 1360 *accum_stats += *delta; 1361 if (*delta > *max_delta) 1362 *max_delta = *delta; 1363 } 1364 } 1365 1366 /* reset accumulative stats for "no-counter" type stats */ 1367 accum_general->temperature = general->temperature; 1368 accum_general->ttl_timestamp = general->ttl_timestamp; 1369 } 1370 #endif 1371 1372 static void 1373 il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb) 1374 { 1375 const int recalib_seconds = 60; 1376 bool change; 1377 struct il_rx_pkt *pkt = rxb_addr(rxb); 1378 1379 D_RX("Statistics notification received (%d vs %d).\n", 1380 (int)sizeof(struct il_notif_stats), 1381 le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK); 1382 1383 change = 1384 ((il->_4965.stats.general.common.temperature != 1385 pkt->u.stats.general.common.temperature) || 1386 ((il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK) != 1387 (pkt->u.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK))); 1388 #ifdef CONFIG_IWLEGACY_DEBUGFS 1389 il4965_accumulative_stats(il, (__le32 *) &pkt->u.stats); 1390 #endif 1391 1392 /* TODO: reading some of stats is unneeded */ 1393 memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats)); 1394 1395 set_bit(S_STATS, &il->status); 1396 1397 /* 1398 * Reschedule the stats timer to occur in recalib_seconds to ensure 1399 * we get a thermal update even if the uCode doesn't give us one 1400 */ 1401 mod_timer(&il->stats_periodic, 1402 jiffies + msecs_to_jiffies(recalib_seconds * 1000)); 1403 1404 if (unlikely(!test_bit(S_SCANNING, &il->status)) && 1405 (pkt->hdr.cmd == N_STATS)) { 1406 il4965_rx_calc_noise(il); 1407 queue_work(il->workqueue, &il->run_time_calib_work); 1408 } 1409 1410 if (change) 1411 il4965_temperature_calib(il); 1412 } 1413 1414 static void 1415 il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb) 1416 { 1417 struct il_rx_pkt *pkt = rxb_addr(rxb); 1418 1419 if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATS_CLEAR_MSK) { 1420 #ifdef CONFIG_IWLEGACY_DEBUGFS 1421 memset(&il->_4965.accum_stats, 0, 1422 sizeof(struct il_notif_stats)); 1423 memset(&il->_4965.delta_stats, 0, 1424 sizeof(struct il_notif_stats)); 1425 memset(&il->_4965.max_delta, 0, sizeof(struct il_notif_stats)); 1426 #endif 1427 D_RX("Statistics have been cleared\n"); 1428 } 1429 il4965_hdl_stats(il, rxb); 1430 } 1431 1432 1433 /* 1434 * mac80211 queues, ACs, hardware queues, FIFOs. 1435 * 1436 * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues 1437 * 1438 * Mac80211 uses the following numbers, which we get as from it 1439 * by way of skb_get_queue_mapping(skb): 1440 * 1441 * VO 0 1442 * VI 1 1443 * BE 2 1444 * BK 3 1445 * 1446 * 1447 * Regular (not A-MPDU) frames are put into hardware queues corresponding 1448 * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their 1449 * own queue per aggregation session (RA/TID combination), such queues are 1450 * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In 1451 * order to map frames to the right queue, we also need an AC->hw queue 1452 * mapping. This is implemented here. 1453 * 1454 * Due to the way hw queues are set up (by the hw specific modules like 1455 * 4965.c), the AC->hw queue mapping is the identity 1456 * mapping. 1457 */ 1458 1459 static const u8 tid_to_ac[] = { 1460 IEEE80211_AC_BE, 1461 IEEE80211_AC_BK, 1462 IEEE80211_AC_BK, 1463 IEEE80211_AC_BE, 1464 IEEE80211_AC_VI, 1465 IEEE80211_AC_VI, 1466 IEEE80211_AC_VO, 1467 IEEE80211_AC_VO 1468 }; 1469 1470 static inline int 1471 il4965_get_ac_from_tid(u16 tid) 1472 { 1473 if (likely(tid < ARRAY_SIZE(tid_to_ac))) 1474 return tid_to_ac[tid]; 1475 1476 /* no support for TIDs 8-15 yet */ 1477 return -EINVAL; 1478 } 1479 1480 static inline int 1481 il4965_get_fifo_from_tid(u16 tid) 1482 { 1483 static const u8 ac_to_fifo[] = { 1484 IL_TX_FIFO_VO, 1485 IL_TX_FIFO_VI, 1486 IL_TX_FIFO_BE, 1487 IL_TX_FIFO_BK, 1488 }; 1489 1490 if (likely(tid < ARRAY_SIZE(tid_to_ac))) 1491 return ac_to_fifo[tid_to_ac[tid]]; 1492 1493 /* no support for TIDs 8-15 yet */ 1494 return -EINVAL; 1495 } 1496 1497 /* 1498 * handle build C_TX command notification. 1499 */ 1500 static void 1501 il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb, 1502 struct il_tx_cmd *tx_cmd, 1503 struct ieee80211_tx_info *info, 1504 struct ieee80211_hdr *hdr, u8 std_id) 1505 { 1506 __le16 fc = hdr->frame_control; 1507 __le32 tx_flags = tx_cmd->tx_flags; 1508 1509 tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 1510 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { 1511 tx_flags |= TX_CMD_FLG_ACK_MSK; 1512 if (ieee80211_is_mgmt(fc)) 1513 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 1514 if (ieee80211_is_probe_resp(fc) && 1515 !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) 1516 tx_flags |= TX_CMD_FLG_TSF_MSK; 1517 } else { 1518 tx_flags &= (~TX_CMD_FLG_ACK_MSK); 1519 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 1520 } 1521 1522 if (ieee80211_is_back_req(fc)) 1523 tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; 1524 1525 tx_cmd->sta_id = std_id; 1526 if (ieee80211_has_morefrags(fc)) 1527 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; 1528 1529 if (ieee80211_is_data_qos(fc)) { 1530 u8 *qc = ieee80211_get_qos_ctl(hdr); 1531 tx_cmd->tid_tspec = qc[0] & 0xf; 1532 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; 1533 } else { 1534 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 1535 } 1536 1537 il_tx_cmd_protection(il, info, fc, &tx_flags); 1538 1539 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); 1540 if (ieee80211_is_mgmt(fc)) { 1541 if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) 1542 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); 1543 else 1544 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); 1545 } else { 1546 tx_cmd->timeout.pm_frame_timeout = 0; 1547 } 1548 1549 tx_cmd->driver_txop = 0; 1550 tx_cmd->tx_flags = tx_flags; 1551 tx_cmd->next_frame_len = 0; 1552 } 1553 1554 static void 1555 il4965_tx_cmd_build_rate(struct il_priv *il, 1556 struct il_tx_cmd *tx_cmd, 1557 struct ieee80211_tx_info *info, 1558 struct ieee80211_sta *sta, 1559 __le16 fc) 1560 { 1561 const u8 rts_retry_limit = 60; 1562 u32 rate_flags; 1563 int rate_idx; 1564 u8 data_retry_limit; 1565 u8 rate_plcp; 1566 1567 /* Set retry limit on DATA packets and Probe Responses */ 1568 if (ieee80211_is_probe_resp(fc)) 1569 data_retry_limit = 3; 1570 else 1571 data_retry_limit = IL4965_DEFAULT_TX_RETRY; 1572 tx_cmd->data_retry_limit = data_retry_limit; 1573 /* Set retry limit on RTS packets */ 1574 tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit); 1575 1576 /* DATA packets will use the uCode station table for rate/antenna 1577 * selection */ 1578 if (ieee80211_is_data(fc)) { 1579 tx_cmd->initial_rate_idx = 0; 1580 tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; 1581 return; 1582 } 1583 1584 /** 1585 * If the current TX rate stored in mac80211 has the MCS bit set, it's 1586 * not really a TX rate. Thus, we use the lowest supported rate for 1587 * this band. Also use the lowest supported rate if the stored rate 1588 * idx is invalid. 1589 */ 1590 rate_idx = info->control.rates[0].idx; 1591 if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0 1592 || rate_idx > RATE_COUNT_LEGACY) 1593 rate_idx = rate_lowest_index(&il->bands[info->band], sta); 1594 /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ 1595 if (info->band == NL80211_BAND_5GHZ) 1596 rate_idx += IL_FIRST_OFDM_RATE; 1597 /* Get PLCP rate for tx_cmd->rate_n_flags */ 1598 rate_plcp = il_rates[rate_idx].plcp; 1599 /* Zero out flags for this packet */ 1600 rate_flags = 0; 1601 1602 /* Set CCK flag as needed */ 1603 if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE) 1604 rate_flags |= RATE_MCS_CCK_MSK; 1605 1606 /* Set up antennas */ 1607 il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); 1608 rate_flags |= BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; 1609 1610 /* Set the rate in the TX cmd */ 1611 tx_cmd->rate_n_flags = cpu_to_le32(rate_plcp | rate_flags); 1612 } 1613 1614 static void 1615 il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info, 1616 struct il_tx_cmd *tx_cmd, struct sk_buff *skb_frag, 1617 int sta_id) 1618 { 1619 struct ieee80211_key_conf *keyconf = info->control.hw_key; 1620 1621 switch (keyconf->cipher) { 1622 case WLAN_CIPHER_SUITE_CCMP: 1623 tx_cmd->sec_ctl = TX_CMD_SEC_CCM; 1624 memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); 1625 if (info->flags & IEEE80211_TX_CTL_AMPDU) 1626 tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; 1627 D_TX("tx_cmd with AES hwcrypto\n"); 1628 break; 1629 1630 case WLAN_CIPHER_SUITE_TKIP: 1631 tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; 1632 ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); 1633 D_TX("tx_cmd with tkip hwcrypto\n"); 1634 break; 1635 1636 case WLAN_CIPHER_SUITE_WEP104: 1637 tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; 1638 /* fall through */ 1639 case WLAN_CIPHER_SUITE_WEP40: 1640 tx_cmd->sec_ctl |= 1641 (TX_CMD_SEC_WEP | (keyconf->keyidx & TX_CMD_SEC_MSK) << 1642 TX_CMD_SEC_SHIFT); 1643 1644 memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen); 1645 1646 D_TX("Configuring packet for WEP encryption " "with key %d\n", 1647 keyconf->keyidx); 1648 break; 1649 1650 default: 1651 IL_ERR("Unknown encode cipher %x\n", keyconf->cipher); 1652 break; 1653 } 1654 } 1655 1656 /* 1657 * start C_TX command process 1658 */ 1659 int 1660 il4965_tx_skb(struct il_priv *il, 1661 struct ieee80211_sta *sta, 1662 struct sk_buff *skb) 1663 { 1664 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; 1665 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); 1666 struct il_station_priv *sta_priv = NULL; 1667 struct il_tx_queue *txq; 1668 struct il_queue *q; 1669 struct il_device_cmd *out_cmd; 1670 struct il_cmd_meta *out_meta; 1671 struct il_tx_cmd *tx_cmd; 1672 int txq_id; 1673 dma_addr_t phys_addr; 1674 dma_addr_t txcmd_phys; 1675 dma_addr_t scratch_phys; 1676 u16 len, firstlen, secondlen; 1677 u16 seq_number = 0; 1678 __le16 fc; 1679 u8 hdr_len; 1680 u8 sta_id; 1681 u8 wait_write_ptr = 0; 1682 u8 tid = 0; 1683 u8 *qc = NULL; 1684 unsigned long flags; 1685 bool is_agg = false; 1686 1687 spin_lock_irqsave(&il->lock, flags); 1688 if (il_is_rfkill(il)) { 1689 D_DROP("Dropping - RF KILL\n"); 1690 goto drop_unlock; 1691 } 1692 1693 fc = hdr->frame_control; 1694 1695 #ifdef CONFIG_IWLEGACY_DEBUG 1696 if (ieee80211_is_auth(fc)) 1697 D_TX("Sending AUTH frame\n"); 1698 else if (ieee80211_is_assoc_req(fc)) 1699 D_TX("Sending ASSOC frame\n"); 1700 else if (ieee80211_is_reassoc_req(fc)) 1701 D_TX("Sending REASSOC frame\n"); 1702 #endif 1703 1704 hdr_len = ieee80211_hdrlen(fc); 1705 1706 /* For management frames use broadcast id to do not break aggregation */ 1707 if (!ieee80211_is_data(fc)) 1708 sta_id = il->hw_params.bcast_id; 1709 else { 1710 /* Find idx into station table for destination station */ 1711 sta_id = il_sta_id_or_broadcast(il, sta); 1712 1713 if (sta_id == IL_INVALID_STATION) { 1714 D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1); 1715 goto drop_unlock; 1716 } 1717 } 1718 1719 D_TX("station Id %d\n", sta_id); 1720 1721 if (sta) 1722 sta_priv = (void *)sta->drv_priv; 1723 1724 if (sta_priv && sta_priv->asleep && 1725 (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) { 1726 /* 1727 * This sends an asynchronous command to the device, 1728 * but we can rely on it being processed before the 1729 * next frame is processed -- and the next frame to 1730 * this station is the one that will consume this 1731 * counter. 1732 * For now set the counter to just 1 since we do not 1733 * support uAPSD yet. 1734 */ 1735 il4965_sta_modify_sleep_tx_count(il, sta_id, 1); 1736 } 1737 1738 /* FIXME: remove me ? */ 1739 WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM); 1740 1741 /* Access category (AC) is also the queue number */ 1742 txq_id = skb_get_queue_mapping(skb); 1743 1744 /* irqs already disabled/saved above when locking il->lock */ 1745 spin_lock(&il->sta_lock); 1746 1747 if (ieee80211_is_data_qos(fc)) { 1748 qc = ieee80211_get_qos_ctl(hdr); 1749 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; 1750 if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) { 1751 spin_unlock(&il->sta_lock); 1752 goto drop_unlock; 1753 } 1754 seq_number = il->stations[sta_id].tid[tid].seq_number; 1755 seq_number &= IEEE80211_SCTL_SEQ; 1756 hdr->seq_ctrl = 1757 hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG); 1758 hdr->seq_ctrl |= cpu_to_le16(seq_number); 1759 seq_number += 0x10; 1760 /* aggregation is on for this <sta,tid> */ 1761 if (info->flags & IEEE80211_TX_CTL_AMPDU && 1762 il->stations[sta_id].tid[tid].agg.state == IL_AGG_ON) { 1763 txq_id = il->stations[sta_id].tid[tid].agg.txq_id; 1764 is_agg = true; 1765 } 1766 } 1767 1768 txq = &il->txq[txq_id]; 1769 q = &txq->q; 1770 1771 if (unlikely(il_queue_space(q) < q->high_mark)) { 1772 spin_unlock(&il->sta_lock); 1773 goto drop_unlock; 1774 } 1775 1776 if (ieee80211_is_data_qos(fc)) { 1777 il->stations[sta_id].tid[tid].tfds_in_queue++; 1778 if (!ieee80211_has_morefrags(fc)) 1779 il->stations[sta_id].tid[tid].seq_number = seq_number; 1780 } 1781 1782 spin_unlock(&il->sta_lock); 1783 1784 txq->skbs[q->write_ptr] = skb; 1785 1786 /* Set up first empty entry in queue's array of Tx/cmd buffers */ 1787 out_cmd = txq->cmd[q->write_ptr]; 1788 out_meta = &txq->meta[q->write_ptr]; 1789 tx_cmd = &out_cmd->cmd.tx; 1790 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); 1791 memset(tx_cmd, 0, sizeof(struct il_tx_cmd)); 1792 1793 /* 1794 * Set up the Tx-command (not MAC!) header. 1795 * Store the chosen Tx queue and TFD idx within the sequence field; 1796 * after Tx, uCode's Tx response will return this value so driver can 1797 * locate the frame within the tx queue and do post-tx processing. 1798 */ 1799 out_cmd->hdr.cmd = C_TX; 1800 out_cmd->hdr.sequence = 1801 cpu_to_le16((u16) 1802 (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr))); 1803 1804 /* Copy MAC header from skb into command buffer */ 1805 memcpy(tx_cmd->hdr, hdr, hdr_len); 1806 1807 /* Total # bytes to be transmitted */ 1808 tx_cmd->len = cpu_to_le16((u16) skb->len); 1809 1810 if (info->control.hw_key) 1811 il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id); 1812 1813 /* TODO need this for burst mode later on */ 1814 il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id); 1815 1816 il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc); 1817 1818 /* 1819 * Use the first empty entry in this queue's command buffer array 1820 * to contain the Tx command and MAC header concatenated together 1821 * (payload data will be in another buffer). 1822 * Size of this varies, due to varying MAC header length. 1823 * If end is not dword aligned, we'll have 2 extra bytes at the end 1824 * of the MAC header (device reads on dword boundaries). 1825 * We'll tell device about this padding later. 1826 */ 1827 len = sizeof(struct il_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len; 1828 firstlen = (len + 3) & ~3; 1829 1830 /* Tell NIC about any 2-byte padding after MAC header */ 1831 if (firstlen != len) 1832 tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; 1833 1834 /* Physical address of this Tx command's header (not MAC header!), 1835 * within command buffer array. */ 1836 txcmd_phys = 1837 pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, 1838 PCI_DMA_BIDIRECTIONAL); 1839 if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) 1840 goto drop_unlock; 1841 1842 /* Set up TFD's 2nd entry to point directly to remainder of skb, 1843 * if any (802.11 null frames have no payload). */ 1844 secondlen = skb->len - hdr_len; 1845 if (secondlen > 0) { 1846 phys_addr = 1847 pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, 1848 PCI_DMA_TODEVICE); 1849 if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) 1850 goto drop_unlock; 1851 } 1852 1853 /* Add buffer containing Tx command and MAC(!) header to TFD's 1854 * first entry */ 1855 il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); 1856 dma_unmap_addr_set(out_meta, mapping, txcmd_phys); 1857 dma_unmap_len_set(out_meta, len, firstlen); 1858 if (secondlen) 1859 il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 1860 0, 0); 1861 1862 if (!ieee80211_has_morefrags(hdr->frame_control)) { 1863 txq->need_update = 1; 1864 } else { 1865 wait_write_ptr = 1; 1866 txq->need_update = 0; 1867 } 1868 1869 scratch_phys = 1870 txcmd_phys + sizeof(struct il_cmd_header) + 1871 offsetof(struct il_tx_cmd, scratch); 1872 1873 /* take back ownership of DMA buffer to enable update */ 1874 pci_dma_sync_single_for_cpu(il->pci_dev, txcmd_phys, firstlen, 1875 PCI_DMA_BIDIRECTIONAL); 1876 tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); 1877 tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys); 1878 1879 il_update_stats(il, true, fc, skb->len); 1880 1881 D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); 1882 D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); 1883 il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd)); 1884 il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, hdr_len); 1885 1886 /* Set up entry for this TFD in Tx byte-count array */ 1887 if (info->flags & IEEE80211_TX_CTL_AMPDU) 1888 il->ops->txq_update_byte_cnt_tbl(il, txq, le16_to_cpu(tx_cmd->len)); 1889 1890 pci_dma_sync_single_for_device(il->pci_dev, txcmd_phys, firstlen, 1891 PCI_DMA_BIDIRECTIONAL); 1892 1893 /* Tell device the write idx *just past* this latest filled TFD */ 1894 q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); 1895 il_txq_update_write_ptr(il, txq); 1896 spin_unlock_irqrestore(&il->lock, flags); 1897 1898 /* 1899 * At this point the frame is "transmitted" successfully 1900 * and we will get a TX status notification eventually, 1901 * regardless of the value of ret. "ret" only indicates 1902 * whether or not we should update the write pointer. 1903 */ 1904 1905 /* 1906 * Avoid atomic ops if it isn't an associated client. 1907 * Also, if this is a packet for aggregation, don't 1908 * increase the counter because the ucode will stop 1909 * aggregation queues when their respective station 1910 * goes to sleep. 1911 */ 1912 if (sta_priv && sta_priv->client && !is_agg) 1913 atomic_inc(&sta_priv->pending_frames); 1914 1915 if (il_queue_space(q) < q->high_mark && il->mac80211_registered) { 1916 if (wait_write_ptr) { 1917 spin_lock_irqsave(&il->lock, flags); 1918 txq->need_update = 1; 1919 il_txq_update_write_ptr(il, txq); 1920 spin_unlock_irqrestore(&il->lock, flags); 1921 } else { 1922 il_stop_queue(il, txq); 1923 } 1924 } 1925 1926 return 0; 1927 1928 drop_unlock: 1929 spin_unlock_irqrestore(&il->lock, flags); 1930 return -1; 1931 } 1932 1933 static inline int 1934 il4965_alloc_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr, size_t size) 1935 { 1936 ptr->addr = dma_alloc_coherent(&il->pci_dev->dev, size, &ptr->dma, 1937 GFP_KERNEL); 1938 if (!ptr->addr) 1939 return -ENOMEM; 1940 ptr->size = size; 1941 return 0; 1942 } 1943 1944 static inline void 1945 il4965_free_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr) 1946 { 1947 if (unlikely(!ptr->addr)) 1948 return; 1949 1950 dma_free_coherent(&il->pci_dev->dev, ptr->size, ptr->addr, ptr->dma); 1951 memset(ptr, 0, sizeof(*ptr)); 1952 } 1953 1954 /** 1955 * il4965_hw_txq_ctx_free - Free TXQ Context 1956 * 1957 * Destroy all TX DMA queues and structures 1958 */ 1959 void 1960 il4965_hw_txq_ctx_free(struct il_priv *il) 1961 { 1962 int txq_id; 1963 1964 /* Tx queues */ 1965 if (il->txq) { 1966 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) 1967 if (txq_id == il->cmd_queue) 1968 il_cmd_queue_free(il); 1969 else 1970 il_tx_queue_free(il, txq_id); 1971 } 1972 il4965_free_dma_ptr(il, &il->kw); 1973 1974 il4965_free_dma_ptr(il, &il->scd_bc_tbls); 1975 1976 /* free tx queue structure */ 1977 il_free_txq_mem(il); 1978 } 1979 1980 /** 1981 * il4965_txq_ctx_alloc - allocate TX queue context 1982 * Allocate all Tx DMA structures and initialize them 1983 * 1984 * @param il 1985 * @return error code 1986 */ 1987 int 1988 il4965_txq_ctx_alloc(struct il_priv *il) 1989 { 1990 int ret, txq_id; 1991 unsigned long flags; 1992 1993 /* Free all tx/cmd queues and keep-warm buffer */ 1994 il4965_hw_txq_ctx_free(il); 1995 1996 ret = 1997 il4965_alloc_dma_ptr(il, &il->scd_bc_tbls, 1998 il->hw_params.scd_bc_tbls_size); 1999 if (ret) { 2000 IL_ERR("Scheduler BC Table allocation failed\n"); 2001 goto error_bc_tbls; 2002 } 2003 /* Alloc keep-warm buffer */ 2004 ret = il4965_alloc_dma_ptr(il, &il->kw, IL_KW_SIZE); 2005 if (ret) { 2006 IL_ERR("Keep Warm allocation failed\n"); 2007 goto error_kw; 2008 } 2009 2010 /* allocate tx queue structure */ 2011 ret = il_alloc_txq_mem(il); 2012 if (ret) 2013 goto error; 2014 2015 spin_lock_irqsave(&il->lock, flags); 2016 2017 /* Turn off all Tx DMA fifos */ 2018 il4965_txq_set_sched(il, 0); 2019 2020 /* Tell NIC where to find the "keep warm" buffer */ 2021 il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); 2022 2023 spin_unlock_irqrestore(&il->lock, flags); 2024 2025 /* Alloc and init all Tx queues, including the command queue (#4/#9) */ 2026 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { 2027 ret = il_tx_queue_init(il, txq_id); 2028 if (ret) { 2029 IL_ERR("Tx %d queue init failed\n", txq_id); 2030 goto error; 2031 } 2032 } 2033 2034 return ret; 2035 2036 error: 2037 il4965_hw_txq_ctx_free(il); 2038 il4965_free_dma_ptr(il, &il->kw); 2039 error_kw: 2040 il4965_free_dma_ptr(il, &il->scd_bc_tbls); 2041 error_bc_tbls: 2042 return ret; 2043 } 2044 2045 void 2046 il4965_txq_ctx_reset(struct il_priv *il) 2047 { 2048 int txq_id; 2049 unsigned long flags; 2050 2051 spin_lock_irqsave(&il->lock, flags); 2052 2053 /* Turn off all Tx DMA fifos */ 2054 il4965_txq_set_sched(il, 0); 2055 /* Tell NIC where to find the "keep warm" buffer */ 2056 il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); 2057 2058 spin_unlock_irqrestore(&il->lock, flags); 2059 2060 /* Alloc and init all Tx queues, including the command queue (#4) */ 2061 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) 2062 il_tx_queue_reset(il, txq_id); 2063 } 2064 2065 static void 2066 il4965_txq_ctx_unmap(struct il_priv *il) 2067 { 2068 int txq_id; 2069 2070 if (!il->txq) 2071 return; 2072 2073 /* Unmap DMA from host system and free skb's */ 2074 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) 2075 if (txq_id == il->cmd_queue) 2076 il_cmd_queue_unmap(il); 2077 else 2078 il_tx_queue_unmap(il, txq_id); 2079 } 2080 2081 /** 2082 * il4965_txq_ctx_stop - Stop all Tx DMA channels 2083 */ 2084 void 2085 il4965_txq_ctx_stop(struct il_priv *il) 2086 { 2087 int ch, ret; 2088 2089 _il_wr_prph(il, IL49_SCD_TXFACT, 0); 2090 2091 /* Stop each Tx DMA channel, and wait for it to be idle */ 2092 for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) { 2093 _il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0); 2094 ret = 2095 _il_poll_bit(il, FH49_TSSR_TX_STATUS_REG, 2096 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), 2097 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), 2098 1000); 2099 if (ret < 0) 2100 IL_ERR("Timeout stopping DMA channel %d [0x%08x]", 2101 ch, _il_rd(il, FH49_TSSR_TX_STATUS_REG)); 2102 } 2103 } 2104 2105 /* 2106 * Find first available (lowest unused) Tx Queue, mark it "active". 2107 * Called only when finding queue for aggregation. 2108 * Should never return anything < 7, because they should already 2109 * be in use as EDCA AC (0-3), Command (4), reserved (5, 6) 2110 */ 2111 static int 2112 il4965_txq_ctx_activate_free(struct il_priv *il) 2113 { 2114 int txq_id; 2115 2116 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) 2117 if (!test_and_set_bit(txq_id, &il->txq_ctx_active_msk)) 2118 return txq_id; 2119 return -1; 2120 } 2121 2122 /** 2123 * il4965_tx_queue_stop_scheduler - Stop queue, but keep configuration 2124 */ 2125 static void 2126 il4965_tx_queue_stop_scheduler(struct il_priv *il, u16 txq_id) 2127 { 2128 /* Simply stop the queue, but don't change any configuration; 2129 * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ 2130 il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), 2131 (0 << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | 2132 (1 << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); 2133 } 2134 2135 /** 2136 * il4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue 2137 */ 2138 static int 2139 il4965_tx_queue_set_q2ratid(struct il_priv *il, u16 ra_tid, u16 txq_id) 2140 { 2141 u32 tbl_dw_addr; 2142 u32 tbl_dw; 2143 u16 scd_q2ratid; 2144 2145 scd_q2ratid = ra_tid & IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK; 2146 2147 tbl_dw_addr = 2148 il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); 2149 2150 tbl_dw = il_read_targ_mem(il, tbl_dw_addr); 2151 2152 if (txq_id & 0x1) 2153 tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); 2154 else 2155 tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); 2156 2157 il_write_targ_mem(il, tbl_dw_addr, tbl_dw); 2158 2159 return 0; 2160 } 2161 2162 /** 2163 * il4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue 2164 * 2165 * NOTE: txq_id must be greater than IL49_FIRST_AMPDU_QUEUE, 2166 * i.e. it must be one of the higher queues used for aggregation 2167 */ 2168 static int 2169 il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id, 2170 int tid, u16 ssn_idx) 2171 { 2172 unsigned long flags; 2173 u16 ra_tid; 2174 int ret; 2175 2176 if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || 2177 (IL49_FIRST_AMPDU_QUEUE + 2178 il->cfg->num_of_ampdu_queues <= txq_id)) { 2179 IL_WARN("queue number out of range: %d, must be %d to %d\n", 2180 txq_id, IL49_FIRST_AMPDU_QUEUE, 2181 IL49_FIRST_AMPDU_QUEUE + 2182 il->cfg->num_of_ampdu_queues - 1); 2183 return -EINVAL; 2184 } 2185 2186 ra_tid = BUILD_RAxTID(sta_id, tid); 2187 2188 /* Modify device's station table to Tx this TID */ 2189 ret = il4965_sta_tx_modify_enable_tid(il, sta_id, tid); 2190 if (ret) 2191 return ret; 2192 2193 spin_lock_irqsave(&il->lock, flags); 2194 2195 /* Stop this Tx queue before configuring it */ 2196 il4965_tx_queue_stop_scheduler(il, txq_id); 2197 2198 /* Map receiver-address / traffic-ID to this queue */ 2199 il4965_tx_queue_set_q2ratid(il, ra_tid, txq_id); 2200 2201 /* Set this queue as a chain-building queue */ 2202 il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); 2203 2204 /* Place first TFD at idx corresponding to start sequence number. 2205 * Assumes that ssn_idx is valid (!= 0xFFF) */ 2206 il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); 2207 il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); 2208 il4965_set_wr_ptrs(il, txq_id, ssn_idx); 2209 2210 /* Set up Tx win size and frame limit for this queue */ 2211 il_write_targ_mem(il, 2212 il->scd_base_addr + 2213 IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), 2214 (SCD_WIN_SIZE << IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) 2215 & IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); 2216 2217 il_write_targ_mem(il, 2218 il->scd_base_addr + 2219 IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), 2220 (SCD_FRAME_LIMIT << 2221 IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & 2222 IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); 2223 2224 il_set_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); 2225 2226 /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */ 2227 il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 1); 2228 2229 spin_unlock_irqrestore(&il->lock, flags); 2230 2231 return 0; 2232 } 2233 2234 int 2235 il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif, 2236 struct ieee80211_sta *sta, u16 tid, u16 * ssn) 2237 { 2238 int sta_id; 2239 int tx_fifo; 2240 int txq_id; 2241 int ret; 2242 unsigned long flags; 2243 struct il_tid_data *tid_data; 2244 2245 /* FIXME: warning if tx fifo not found ? */ 2246 tx_fifo = il4965_get_fifo_from_tid(tid); 2247 if (unlikely(tx_fifo < 0)) 2248 return tx_fifo; 2249 2250 D_HT("%s on ra = %pM tid = %d\n", __func__, sta->addr, tid); 2251 2252 sta_id = il_sta_id(sta); 2253 if (sta_id == IL_INVALID_STATION) { 2254 IL_ERR("Start AGG on invalid station\n"); 2255 return -ENXIO; 2256 } 2257 if (unlikely(tid >= MAX_TID_COUNT)) 2258 return -EINVAL; 2259 2260 if (il->stations[sta_id].tid[tid].agg.state != IL_AGG_OFF) { 2261 IL_ERR("Start AGG when state is not IL_AGG_OFF !\n"); 2262 return -ENXIO; 2263 } 2264 2265 txq_id = il4965_txq_ctx_activate_free(il); 2266 if (txq_id == -1) { 2267 IL_ERR("No free aggregation queue available\n"); 2268 return -ENXIO; 2269 } 2270 2271 spin_lock_irqsave(&il->sta_lock, flags); 2272 tid_data = &il->stations[sta_id].tid[tid]; 2273 *ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); 2274 tid_data->agg.txq_id = txq_id; 2275 il_set_swq_id(&il->txq[txq_id], il4965_get_ac_from_tid(tid), txq_id); 2276 spin_unlock_irqrestore(&il->sta_lock, flags); 2277 2278 ret = il4965_txq_agg_enable(il, txq_id, tx_fifo, sta_id, tid, *ssn); 2279 if (ret) 2280 return ret; 2281 2282 spin_lock_irqsave(&il->sta_lock, flags); 2283 tid_data = &il->stations[sta_id].tid[tid]; 2284 if (tid_data->tfds_in_queue == 0) { 2285 D_HT("HW queue is empty\n"); 2286 tid_data->agg.state = IL_AGG_ON; 2287 ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); 2288 } else { 2289 D_HT("HW queue is NOT empty: %d packets in HW queue\n", 2290 tid_data->tfds_in_queue); 2291 tid_data->agg.state = IL_EMPTYING_HW_QUEUE_ADDBA; 2292 } 2293 spin_unlock_irqrestore(&il->sta_lock, flags); 2294 return ret; 2295 } 2296 2297 /** 2298 * txq_id must be greater than IL49_FIRST_AMPDU_QUEUE 2299 * il->lock must be held by the caller 2300 */ 2301 static int 2302 il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo) 2303 { 2304 if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || 2305 (IL49_FIRST_AMPDU_QUEUE + 2306 il->cfg->num_of_ampdu_queues <= txq_id)) { 2307 IL_WARN("queue number out of range: %d, must be %d to %d\n", 2308 txq_id, IL49_FIRST_AMPDU_QUEUE, 2309 IL49_FIRST_AMPDU_QUEUE + 2310 il->cfg->num_of_ampdu_queues - 1); 2311 return -EINVAL; 2312 } 2313 2314 il4965_tx_queue_stop_scheduler(il, txq_id); 2315 2316 il_clear_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); 2317 2318 il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); 2319 il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); 2320 /* supposes that ssn_idx is valid (!= 0xFFF) */ 2321 il4965_set_wr_ptrs(il, txq_id, ssn_idx); 2322 2323 il_clear_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); 2324 il_txq_ctx_deactivate(il, txq_id); 2325 il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 0); 2326 2327 return 0; 2328 } 2329 2330 int 2331 il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif, 2332 struct ieee80211_sta *sta, u16 tid) 2333 { 2334 int tx_fifo_id, txq_id, sta_id, ssn; 2335 struct il_tid_data *tid_data; 2336 int write_ptr, read_ptr; 2337 unsigned long flags; 2338 2339 /* FIXME: warning if tx_fifo_id not found ? */ 2340 tx_fifo_id = il4965_get_fifo_from_tid(tid); 2341 if (unlikely(tx_fifo_id < 0)) 2342 return tx_fifo_id; 2343 2344 sta_id = il_sta_id(sta); 2345 2346 if (sta_id == IL_INVALID_STATION) { 2347 IL_ERR("Invalid station for AGG tid %d\n", tid); 2348 return -ENXIO; 2349 } 2350 2351 spin_lock_irqsave(&il->sta_lock, flags); 2352 2353 tid_data = &il->stations[sta_id].tid[tid]; 2354 ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; 2355 txq_id = tid_data->agg.txq_id; 2356 2357 switch (il->stations[sta_id].tid[tid].agg.state) { 2358 case IL_EMPTYING_HW_QUEUE_ADDBA: 2359 /* 2360 * This can happen if the peer stops aggregation 2361 * again before we've had a chance to drain the 2362 * queue we selected previously, i.e. before the 2363 * session was really started completely. 2364 */ 2365 D_HT("AGG stop before setup done\n"); 2366 goto turn_off; 2367 case IL_AGG_ON: 2368 break; 2369 default: 2370 IL_WARN("Stopping AGG while state not ON or starting\n"); 2371 } 2372 2373 write_ptr = il->txq[txq_id].q.write_ptr; 2374 read_ptr = il->txq[txq_id].q.read_ptr; 2375 2376 /* The queue is not empty */ 2377 if (write_ptr != read_ptr) { 2378 D_HT("Stopping a non empty AGG HW QUEUE\n"); 2379 il->stations[sta_id].tid[tid].agg.state = 2380 IL_EMPTYING_HW_QUEUE_DELBA; 2381 spin_unlock_irqrestore(&il->sta_lock, flags); 2382 return 0; 2383 } 2384 2385 D_HT("HW queue is empty\n"); 2386 turn_off: 2387 il->stations[sta_id].tid[tid].agg.state = IL_AGG_OFF; 2388 2389 /* do not restore/save irqs */ 2390 spin_unlock(&il->sta_lock); 2391 spin_lock(&il->lock); 2392 2393 /* 2394 * the only reason this call can fail is queue number out of range, 2395 * which can happen if uCode is reloaded and all the station 2396 * information are lost. if it is outside the range, there is no need 2397 * to deactivate the uCode queue, just return "success" to allow 2398 * mac80211 to clean up it own data. 2399 */ 2400 il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo_id); 2401 spin_unlock_irqrestore(&il->lock, flags); 2402 2403 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); 2404 2405 return 0; 2406 } 2407 2408 int 2409 il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id) 2410 { 2411 struct il_queue *q = &il->txq[txq_id].q; 2412 u8 *addr = il->stations[sta_id].sta.sta.addr; 2413 struct il_tid_data *tid_data = &il->stations[sta_id].tid[tid]; 2414 2415 lockdep_assert_held(&il->sta_lock); 2416 2417 switch (il->stations[sta_id].tid[tid].agg.state) { 2418 case IL_EMPTYING_HW_QUEUE_DELBA: 2419 /* We are reclaiming the last packet of the */ 2420 /* aggregated HW queue */ 2421 if (txq_id == tid_data->agg.txq_id && 2422 q->read_ptr == q->write_ptr) { 2423 u16 ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); 2424 int tx_fifo = il4965_get_fifo_from_tid(tid); 2425 D_HT("HW queue empty: continue DELBA flow\n"); 2426 il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo); 2427 tid_data->agg.state = IL_AGG_OFF; 2428 ieee80211_stop_tx_ba_cb_irqsafe(il->vif, addr, tid); 2429 } 2430 break; 2431 case IL_EMPTYING_HW_QUEUE_ADDBA: 2432 /* We are reclaiming the last packet of the queue */ 2433 if (tid_data->tfds_in_queue == 0) { 2434 D_HT("HW queue empty: continue ADDBA flow\n"); 2435 tid_data->agg.state = IL_AGG_ON; 2436 ieee80211_start_tx_ba_cb_irqsafe(il->vif, addr, tid); 2437 } 2438 break; 2439 } 2440 2441 return 0; 2442 } 2443 2444 static void 2445 il4965_non_agg_tx_status(struct il_priv *il, const u8 *addr1) 2446 { 2447 struct ieee80211_sta *sta; 2448 struct il_station_priv *sta_priv; 2449 2450 rcu_read_lock(); 2451 sta = ieee80211_find_sta(il->vif, addr1); 2452 if (sta) { 2453 sta_priv = (void *)sta->drv_priv; 2454 /* avoid atomic ops if this isn't a client */ 2455 if (sta_priv->client && 2456 atomic_dec_return(&sta_priv->pending_frames) == 0) 2457 ieee80211_sta_block_awake(il->hw, sta, false); 2458 } 2459 rcu_read_unlock(); 2460 } 2461 2462 static void 2463 il4965_tx_status(struct il_priv *il, struct sk_buff *skb, bool is_agg) 2464 { 2465 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; 2466 2467 if (!is_agg) 2468 il4965_non_agg_tx_status(il, hdr->addr1); 2469 2470 ieee80211_tx_status_irqsafe(il->hw, skb); 2471 } 2472 2473 int 2474 il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx) 2475 { 2476 struct il_tx_queue *txq = &il->txq[txq_id]; 2477 struct il_queue *q = &txq->q; 2478 int nfreed = 0; 2479 struct ieee80211_hdr *hdr; 2480 struct sk_buff *skb; 2481 2482 if (idx >= q->n_bd || il_queue_used(q, idx) == 0) { 2483 IL_ERR("Read idx for DMA queue txq id (%d), idx %d, " 2484 "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd, 2485 q->write_ptr, q->read_ptr); 2486 return 0; 2487 } 2488 2489 for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; 2490 q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { 2491 2492 skb = txq->skbs[txq->q.read_ptr]; 2493 2494 if (WARN_ON_ONCE(skb == NULL)) 2495 continue; 2496 2497 hdr = (struct ieee80211_hdr *) skb->data; 2498 if (ieee80211_is_data_qos(hdr->frame_control)) 2499 nfreed++; 2500 2501 il4965_tx_status(il, skb, txq_id >= IL4965_FIRST_AMPDU_QUEUE); 2502 2503 txq->skbs[txq->q.read_ptr] = NULL; 2504 il->ops->txq_free_tfd(il, txq); 2505 } 2506 return nfreed; 2507 } 2508 2509 /** 2510 * il4965_tx_status_reply_compressed_ba - Update tx status from block-ack 2511 * 2512 * Go through block-ack's bitmap of ACK'd frames, update driver's record of 2513 * ACK vs. not. This gets sent to mac80211, then to rate scaling algo. 2514 */ 2515 static int 2516 il4965_tx_status_reply_compressed_ba(struct il_priv *il, struct il_ht_agg *agg, 2517 struct il_compressed_ba_resp *ba_resp) 2518 { 2519 int i, sh, ack; 2520 u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl); 2521 u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); 2522 int successes = 0; 2523 struct ieee80211_tx_info *info; 2524 u64 bitmap, sent_bitmap; 2525 2526 if (unlikely(!agg->wait_for_ba)) { 2527 if (unlikely(ba_resp->bitmap)) 2528 IL_ERR("Received BA when not expected\n"); 2529 return -EINVAL; 2530 } 2531 2532 /* Mark that the expected block-ack response arrived */ 2533 agg->wait_for_ba = 0; 2534 D_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl); 2535 2536 /* Calculate shift to align block-ack bits with our Tx win bits */ 2537 sh = agg->start_idx - SEQ_TO_IDX(seq_ctl >> 4); 2538 if (sh < 0) /* tbw something is wrong with indices */ 2539 sh += 0x100; 2540 2541 if (agg->frame_count > (64 - sh)) { 2542 D_TX_REPLY("more frames than bitmap size"); 2543 return -1; 2544 } 2545 2546 /* don't use 64-bit values for now */ 2547 bitmap = le64_to_cpu(ba_resp->bitmap) >> sh; 2548 2549 /* check for success or failure according to the 2550 * transmitted bitmap and block-ack bitmap */ 2551 sent_bitmap = bitmap & agg->bitmap; 2552 2553 /* For each frame attempted in aggregation, 2554 * update driver's record of tx frame's status. */ 2555 i = 0; 2556 while (sent_bitmap) { 2557 ack = sent_bitmap & 1ULL; 2558 successes += ack; 2559 D_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack ? "ACK" : "NACK", 2560 i, (agg->start_idx + i) & 0xff, agg->start_idx + i); 2561 sent_bitmap >>= 1; 2562 ++i; 2563 } 2564 2565 D_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap); 2566 2567 info = IEEE80211_SKB_CB(il->txq[scd_flow].skbs[agg->start_idx]); 2568 memset(&info->status, 0, sizeof(info->status)); 2569 info->flags |= IEEE80211_TX_STAT_ACK; 2570 info->flags |= IEEE80211_TX_STAT_AMPDU; 2571 info->status.ampdu_ack_len = successes; 2572 info->status.ampdu_len = agg->frame_count; 2573 il4965_hwrate_to_tx_control(il, agg->rate_n_flags, info); 2574 2575 return 0; 2576 } 2577 2578 static inline bool 2579 il4965_is_tx_success(u32 status) 2580 { 2581 status &= TX_STATUS_MSK; 2582 return (status == TX_STATUS_SUCCESS || status == TX_STATUS_DIRECT_DONE); 2583 } 2584 2585 static u8 2586 il4965_find_station(struct il_priv *il, const u8 *addr) 2587 { 2588 int i; 2589 int start = 0; 2590 int ret = IL_INVALID_STATION; 2591 unsigned long flags; 2592 2593 if (il->iw_mode == NL80211_IFTYPE_ADHOC) 2594 start = IL_STA_ID; 2595 2596 if (is_broadcast_ether_addr(addr)) 2597 return il->hw_params.bcast_id; 2598 2599 spin_lock_irqsave(&il->sta_lock, flags); 2600 for (i = start; i < il->hw_params.max_stations; i++) 2601 if (il->stations[i].used && 2602 ether_addr_equal(il->stations[i].sta.sta.addr, addr)) { 2603 ret = i; 2604 goto out; 2605 } 2606 2607 D_ASSOC("can not find STA %pM total %d\n", addr, il->num_stations); 2608 2609 out: 2610 /* 2611 * It may be possible that more commands interacting with stations 2612 * arrive before we completed processing the adding of 2613 * station 2614 */ 2615 if (ret != IL_INVALID_STATION && 2616 (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) || 2617 ((il->stations[ret].used & IL_STA_UCODE_ACTIVE) && 2618 (il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) { 2619 IL_ERR("Requested station info for sta %d before ready.\n", 2620 ret); 2621 ret = IL_INVALID_STATION; 2622 } 2623 spin_unlock_irqrestore(&il->sta_lock, flags); 2624 return ret; 2625 } 2626 2627 static int 2628 il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr) 2629 { 2630 if (il->iw_mode == NL80211_IFTYPE_STATION) 2631 return IL_AP_ID; 2632 else { 2633 u8 *da = ieee80211_get_DA(hdr); 2634 2635 return il4965_find_station(il, da); 2636 } 2637 } 2638 2639 static inline u32 2640 il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp) 2641 { 2642 return le32_to_cpup(&tx_resp->u.status + 2643 tx_resp->frame_count) & IEEE80211_MAX_SN; 2644 } 2645 2646 static inline u32 2647 il4965_tx_status_to_mac80211(u32 status) 2648 { 2649 status &= TX_STATUS_MSK; 2650 2651 switch (status) { 2652 case TX_STATUS_SUCCESS: 2653 case TX_STATUS_DIRECT_DONE: 2654 return IEEE80211_TX_STAT_ACK; 2655 case TX_STATUS_FAIL_DEST_PS: 2656 return IEEE80211_TX_STAT_TX_FILTERED; 2657 default: 2658 return 0; 2659 } 2660 } 2661 2662 /** 2663 * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue 2664 */ 2665 static int 2666 il4965_tx_status_reply_tx(struct il_priv *il, struct il_ht_agg *agg, 2667 struct il4965_tx_resp *tx_resp, int txq_id, 2668 u16 start_idx) 2669 { 2670 u16 status; 2671 struct agg_tx_status *frame_status = tx_resp->u.agg_status; 2672 struct ieee80211_tx_info *info = NULL; 2673 struct ieee80211_hdr *hdr = NULL; 2674 u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); 2675 int i, sh, idx; 2676 u16 seq; 2677 if (agg->wait_for_ba) 2678 D_TX_REPLY("got tx response w/o block-ack\n"); 2679 2680 agg->frame_count = tx_resp->frame_count; 2681 agg->start_idx = start_idx; 2682 agg->rate_n_flags = rate_n_flags; 2683 agg->bitmap = 0; 2684 2685 /* num frames attempted by Tx command */ 2686 if (agg->frame_count == 1) { 2687 /* Only one frame was attempted; no block-ack will arrive */ 2688 status = le16_to_cpu(frame_status[0].status); 2689 idx = start_idx; 2690 2691 D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n", 2692 agg->frame_count, agg->start_idx, idx); 2693 2694 info = IEEE80211_SKB_CB(il->txq[txq_id].skbs[idx]); 2695 info->status.rates[0].count = tx_resp->failure_frame + 1; 2696 info->flags &= ~IEEE80211_TX_CTL_AMPDU; 2697 info->flags |= il4965_tx_status_to_mac80211(status); 2698 il4965_hwrate_to_tx_control(il, rate_n_flags, info); 2699 2700 D_TX_REPLY("1 Frame 0x%x failure :%d\n", status & 0xff, 2701 tx_resp->failure_frame); 2702 D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags); 2703 2704 agg->wait_for_ba = 0; 2705 } else { 2706 /* Two or more frames were attempted; expect block-ack */ 2707 u64 bitmap = 0; 2708 int start = agg->start_idx; 2709 struct sk_buff *skb; 2710 2711 /* Construct bit-map of pending frames within Tx win */ 2712 for (i = 0; i < agg->frame_count; i++) { 2713 u16 sc; 2714 status = le16_to_cpu(frame_status[i].status); 2715 seq = le16_to_cpu(frame_status[i].sequence); 2716 idx = SEQ_TO_IDX(seq); 2717 txq_id = SEQ_TO_QUEUE(seq); 2718 2719 if (status & 2720 (AGG_TX_STATE_FEW_BYTES_MSK | 2721 AGG_TX_STATE_ABORT_MSK)) 2722 continue; 2723 2724 D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n", 2725 agg->frame_count, txq_id, idx); 2726 2727 skb = il->txq[txq_id].skbs[idx]; 2728 if (WARN_ON_ONCE(skb == NULL)) 2729 return -1; 2730 hdr = (struct ieee80211_hdr *) skb->data; 2731 2732 sc = le16_to_cpu(hdr->seq_ctrl); 2733 if (idx != (IEEE80211_SEQ_TO_SN(sc) & 0xff)) { 2734 IL_ERR("BUG_ON idx doesn't match seq control" 2735 " idx=%d, seq_idx=%d, seq=%d\n", idx, 2736 IEEE80211_SEQ_TO_SN(sc), hdr->seq_ctrl); 2737 return -1; 2738 } 2739 2740 D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", i, idx, 2741 IEEE80211_SEQ_TO_SN(sc)); 2742 2743 sh = idx - start; 2744 if (sh > 64) { 2745 sh = (start - idx) + 0xff; 2746 bitmap = bitmap << sh; 2747 sh = 0; 2748 start = idx; 2749 } else if (sh < -64) 2750 sh = 0xff - (start - idx); 2751 else if (sh < 0) { 2752 sh = start - idx; 2753 start = idx; 2754 bitmap = bitmap << sh; 2755 sh = 0; 2756 } 2757 bitmap |= 1ULL << sh; 2758 D_TX_REPLY("start=%d bitmap=0x%llx\n", start, 2759 (unsigned long long)bitmap); 2760 } 2761 2762 agg->bitmap = bitmap; 2763 agg->start_idx = start; 2764 D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n", 2765 agg->frame_count, agg->start_idx, 2766 (unsigned long long)agg->bitmap); 2767 2768 if (bitmap) 2769 agg->wait_for_ba = 1; 2770 } 2771 return 0; 2772 } 2773 2774 /** 2775 * il4965_hdl_tx - Handle standard (non-aggregation) Tx response 2776 */ 2777 static void 2778 il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) 2779 { 2780 struct il_rx_pkt *pkt = rxb_addr(rxb); 2781 u16 sequence = le16_to_cpu(pkt->hdr.sequence); 2782 int txq_id = SEQ_TO_QUEUE(sequence); 2783 int idx = SEQ_TO_IDX(sequence); 2784 struct il_tx_queue *txq = &il->txq[txq_id]; 2785 struct sk_buff *skb; 2786 struct ieee80211_hdr *hdr; 2787 struct ieee80211_tx_info *info; 2788 struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; 2789 u32 status = le32_to_cpu(tx_resp->u.status); 2790 int uninitialized_var(tid); 2791 int sta_id; 2792 int freed; 2793 u8 *qc = NULL; 2794 unsigned long flags; 2795 2796 if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) { 2797 IL_ERR("Read idx for DMA queue txq_id (%d) idx %d " 2798 "is out of range [0-%d] %d %d\n", txq_id, idx, 2799 txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr); 2800 return; 2801 } 2802 2803 txq->time_stamp = jiffies; 2804 2805 skb = txq->skbs[txq->q.read_ptr]; 2806 info = IEEE80211_SKB_CB(skb); 2807 memset(&info->status, 0, sizeof(info->status)); 2808 2809 hdr = (struct ieee80211_hdr *) skb->data; 2810 if (ieee80211_is_data_qos(hdr->frame_control)) { 2811 qc = ieee80211_get_qos_ctl(hdr); 2812 tid = qc[0] & 0xf; 2813 } 2814 2815 sta_id = il4965_get_ra_sta_id(il, hdr); 2816 if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) { 2817 IL_ERR("Station not known\n"); 2818 return; 2819 } 2820 2821 /* 2822 * Firmware will not transmit frame on passive channel, if it not yet 2823 * received some valid frame on that channel. When this error happen 2824 * we have to wait until firmware will unblock itself i.e. when we 2825 * note received beacon or other frame. We unblock queues in 2826 * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed. 2827 */ 2828 if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && 2829 il->iw_mode == NL80211_IFTYPE_STATION) { 2830 il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); 2831 D_INFO("Stopped queues - RX waiting on passive channel\n"); 2832 } 2833 2834 spin_lock_irqsave(&il->sta_lock, flags); 2835 if (txq->sched_retry) { 2836 const u32 scd_ssn = il4965_get_scd_ssn(tx_resp); 2837 struct il_ht_agg *agg = NULL; 2838 WARN_ON(!qc); 2839 2840 agg = &il->stations[sta_id].tid[tid].agg; 2841 2842 il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx); 2843 2844 /* check if BAR is needed */ 2845 if (tx_resp->frame_count == 1 && 2846 !il4965_is_tx_success(status)) 2847 info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; 2848 2849 if (txq->q.read_ptr != (scd_ssn & 0xff)) { 2850 idx = il_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); 2851 D_TX_REPLY("Retry scheduler reclaim scd_ssn " 2852 "%d idx %d\n", scd_ssn, idx); 2853 freed = il4965_tx_queue_reclaim(il, txq_id, idx); 2854 if (qc) 2855 il4965_free_tfds_in_queue(il, sta_id, tid, 2856 freed); 2857 2858 if (il->mac80211_registered && 2859 il_queue_space(&txq->q) > txq->q.low_mark && 2860 agg->state != IL_EMPTYING_HW_QUEUE_DELBA) 2861 il_wake_queue(il, txq); 2862 } 2863 } else { 2864 info->status.rates[0].count = tx_resp->failure_frame + 1; 2865 info->flags |= il4965_tx_status_to_mac80211(status); 2866 il4965_hwrate_to_tx_control(il, 2867 le32_to_cpu(tx_resp->rate_n_flags), 2868 info); 2869 2870 D_TX_REPLY("TXQ %d status %s (0x%08x) " 2871 "rate_n_flags 0x%x retries %d\n", txq_id, 2872 il4965_get_tx_fail_reason(status), status, 2873 le32_to_cpu(tx_resp->rate_n_flags), 2874 tx_resp->failure_frame); 2875 2876 freed = il4965_tx_queue_reclaim(il, txq_id, idx); 2877 if (qc && likely(sta_id != IL_INVALID_STATION)) 2878 il4965_free_tfds_in_queue(il, sta_id, tid, freed); 2879 else if (sta_id == IL_INVALID_STATION) 2880 D_TX_REPLY("Station not known\n"); 2881 2882 if (il->mac80211_registered && 2883 il_queue_space(&txq->q) > txq->q.low_mark) 2884 il_wake_queue(il, txq); 2885 } 2886 if (qc && likely(sta_id != IL_INVALID_STATION)) 2887 il4965_txq_check_empty(il, sta_id, tid, txq_id); 2888 2889 il4965_check_abort_status(il, tx_resp->frame_count, status); 2890 2891 spin_unlock_irqrestore(&il->sta_lock, flags); 2892 } 2893 2894 /** 2895 * translate ucode response to mac80211 tx status control values 2896 */ 2897 void 2898 il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags, 2899 struct ieee80211_tx_info *info) 2900 { 2901 struct ieee80211_tx_rate *r = &info->status.rates[0]; 2902 2903 info->status.antenna = 2904 ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); 2905 if (rate_n_flags & RATE_MCS_HT_MSK) 2906 r->flags |= IEEE80211_TX_RC_MCS; 2907 if (rate_n_flags & RATE_MCS_GF_MSK) 2908 r->flags |= IEEE80211_TX_RC_GREEN_FIELD; 2909 if (rate_n_flags & RATE_MCS_HT40_MSK) 2910 r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; 2911 if (rate_n_flags & RATE_MCS_DUP_MSK) 2912 r->flags |= IEEE80211_TX_RC_DUP_DATA; 2913 if (rate_n_flags & RATE_MCS_SGI_MSK) 2914 r->flags |= IEEE80211_TX_RC_SHORT_GI; 2915 r->idx = il4965_hwrate_to_mac80211_idx(rate_n_flags, info->band); 2916 } 2917 2918 /** 2919 * il4965_hdl_compressed_ba - Handler for N_COMPRESSED_BA 2920 * 2921 * Handles block-acknowledge notification from device, which reports success 2922 * of frames sent via aggregation. 2923 */ 2924 static void 2925 il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb) 2926 { 2927 struct il_rx_pkt *pkt = rxb_addr(rxb); 2928 struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba; 2929 struct il_tx_queue *txq = NULL; 2930 struct il_ht_agg *agg; 2931 int idx; 2932 int sta_id; 2933 int tid; 2934 unsigned long flags; 2935 2936 /* "flow" corresponds to Tx queue */ 2937 u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); 2938 2939 /* "ssn" is start of block-ack Tx win, corresponds to idx 2940 * (in Tx queue's circular buffer) of first TFD/frame in win */ 2941 u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); 2942 2943 if (scd_flow >= il->hw_params.max_txq_num) { 2944 IL_ERR("BUG_ON scd_flow is bigger than number of queues\n"); 2945 return; 2946 } 2947 2948 txq = &il->txq[scd_flow]; 2949 sta_id = ba_resp->sta_id; 2950 tid = ba_resp->tid; 2951 agg = &il->stations[sta_id].tid[tid].agg; 2952 if (unlikely(agg->txq_id != scd_flow)) { 2953 /* 2954 * FIXME: this is a uCode bug which need to be addressed, 2955 * log the information and return for now! 2956 * since it is possible happen very often and in order 2957 * not to fill the syslog, don't enable the logging by default 2958 */ 2959 D_TX_REPLY("BA scd_flow %d does not match txq_id %d\n", 2960 scd_flow, agg->txq_id); 2961 return; 2962 } 2963 2964 /* Find idx just before block-ack win */ 2965 idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); 2966 2967 spin_lock_irqsave(&il->sta_lock, flags); 2968 2969 D_TX_REPLY("N_COMPRESSED_BA [%d] Received from %pM, " "sta_id = %d\n", 2970 agg->wait_for_ba, (u8 *) &ba_resp->sta_addr_lo32, 2971 ba_resp->sta_id); 2972 D_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx," "scd_flow = " 2973 "%d, scd_ssn = %d\n", ba_resp->tid, ba_resp->seq_ctl, 2974 (unsigned long long)le64_to_cpu(ba_resp->bitmap), 2975 ba_resp->scd_flow, ba_resp->scd_ssn); 2976 D_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx\n", agg->start_idx, 2977 (unsigned long long)agg->bitmap); 2978 2979 /* Update driver's record of ACK vs. not for each frame in win */ 2980 il4965_tx_status_reply_compressed_ba(il, agg, ba_resp); 2981 2982 /* Release all TFDs before the SSN, i.e. all TFDs in front of 2983 * block-ack win (we assume that they've been successfully 2984 * transmitted ... if not, it's too late anyway). */ 2985 if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { 2986 /* calculate mac80211 ampdu sw queue to wake */ 2987 int freed = il4965_tx_queue_reclaim(il, scd_flow, idx); 2988 il4965_free_tfds_in_queue(il, sta_id, tid, freed); 2989 2990 if (il_queue_space(&txq->q) > txq->q.low_mark && 2991 il->mac80211_registered && 2992 agg->state != IL_EMPTYING_HW_QUEUE_DELBA) 2993 il_wake_queue(il, txq); 2994 2995 il4965_txq_check_empty(il, sta_id, tid, scd_flow); 2996 } 2997 2998 spin_unlock_irqrestore(&il->sta_lock, flags); 2999 } 3000 3001 #ifdef CONFIG_IWLEGACY_DEBUG 3002 const char * 3003 il4965_get_tx_fail_reason(u32 status) 3004 { 3005 #define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x 3006 #define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x 3007 3008 switch (status & TX_STATUS_MSK) { 3009 case TX_STATUS_SUCCESS: 3010 return "SUCCESS"; 3011 TX_STATUS_POSTPONE(DELAY); 3012 TX_STATUS_POSTPONE(FEW_BYTES); 3013 TX_STATUS_POSTPONE(QUIET_PERIOD); 3014 TX_STATUS_POSTPONE(CALC_TTAK); 3015 TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY); 3016 TX_STATUS_FAIL(SHORT_LIMIT); 3017 TX_STATUS_FAIL(LONG_LIMIT); 3018 TX_STATUS_FAIL(FIFO_UNDERRUN); 3019 TX_STATUS_FAIL(DRAIN_FLOW); 3020 TX_STATUS_FAIL(RFKILL_FLUSH); 3021 TX_STATUS_FAIL(LIFE_EXPIRE); 3022 TX_STATUS_FAIL(DEST_PS); 3023 TX_STATUS_FAIL(HOST_ABORTED); 3024 TX_STATUS_FAIL(BT_RETRY); 3025 TX_STATUS_FAIL(STA_INVALID); 3026 TX_STATUS_FAIL(FRAG_DROPPED); 3027 TX_STATUS_FAIL(TID_DISABLE); 3028 TX_STATUS_FAIL(FIFO_FLUSHED); 3029 TX_STATUS_FAIL(INSUFFICIENT_CF_POLL); 3030 TX_STATUS_FAIL(PASSIVE_NO_RX); 3031 TX_STATUS_FAIL(NO_BEACON_ON_RADAR); 3032 } 3033 3034 return "UNKNOWN"; 3035 3036 #undef TX_STATUS_FAIL 3037 #undef TX_STATUS_POSTPONE 3038 } 3039 #endif /* CONFIG_IWLEGACY_DEBUG */ 3040 3041 static struct il_link_quality_cmd * 3042 il4965_sta_alloc_lq(struct il_priv *il, u8 sta_id) 3043 { 3044 int i, r; 3045 struct il_link_quality_cmd *link_cmd; 3046 u32 rate_flags = 0; 3047 __le32 rate_n_flags; 3048 3049 link_cmd = kzalloc(sizeof(struct il_link_quality_cmd), GFP_KERNEL); 3050 if (!link_cmd) { 3051 IL_ERR("Unable to allocate memory for LQ cmd.\n"); 3052 return NULL; 3053 } 3054 /* Set up the rate scaling to start at selected rate, fall back 3055 * all the way down to 1M in IEEE order, and then spin on 1M */ 3056 if (il->band == NL80211_BAND_5GHZ) 3057 r = RATE_6M_IDX; 3058 else 3059 r = RATE_1M_IDX; 3060 3061 if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE) 3062 rate_flags |= RATE_MCS_CCK_MSK; 3063 3064 rate_flags |= 3065 il4965_first_antenna(il->hw_params. 3066 valid_tx_ant) << RATE_MCS_ANT_POS; 3067 rate_n_flags = cpu_to_le32(il_rates[r].plcp | rate_flags); 3068 for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) 3069 link_cmd->rs_table[i].rate_n_flags = rate_n_flags; 3070 3071 link_cmd->general_params.single_stream_ant_msk = 3072 il4965_first_antenna(il->hw_params.valid_tx_ant); 3073 3074 link_cmd->general_params.dual_stream_ant_msk = 3075 il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params. 3076 valid_tx_ant); 3077 if (!link_cmd->general_params.dual_stream_ant_msk) { 3078 link_cmd->general_params.dual_stream_ant_msk = ANT_AB; 3079 } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) { 3080 link_cmd->general_params.dual_stream_ant_msk = 3081 il->hw_params.valid_tx_ant; 3082 } 3083 3084 link_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; 3085 link_cmd->agg_params.agg_time_limit = 3086 cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); 3087 3088 link_cmd->sta_id = sta_id; 3089 3090 return link_cmd; 3091 } 3092 3093 /* 3094 * il4965_add_bssid_station - Add the special IBSS BSSID station 3095 * 3096 * Function sleeps. 3097 */ 3098 int 3099 il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r) 3100 { 3101 int ret; 3102 u8 sta_id; 3103 struct il_link_quality_cmd *link_cmd; 3104 unsigned long flags; 3105 3106 if (sta_id_r) 3107 *sta_id_r = IL_INVALID_STATION; 3108 3109 ret = il_add_station_common(il, addr, 0, NULL, &sta_id); 3110 if (ret) { 3111 IL_ERR("Unable to add station %pM\n", addr); 3112 return ret; 3113 } 3114 3115 if (sta_id_r) 3116 *sta_id_r = sta_id; 3117 3118 spin_lock_irqsave(&il->sta_lock, flags); 3119 il->stations[sta_id].used |= IL_STA_LOCAL; 3120 spin_unlock_irqrestore(&il->sta_lock, flags); 3121 3122 /* Set up default rate scaling table in device's station table */ 3123 link_cmd = il4965_sta_alloc_lq(il, sta_id); 3124 if (!link_cmd) { 3125 IL_ERR("Unable to initialize rate scaling for station %pM.\n", 3126 addr); 3127 return -ENOMEM; 3128 } 3129 3130 ret = il_send_lq_cmd(il, link_cmd, CMD_SYNC, true); 3131 if (ret) 3132 IL_ERR("Link quality command failed (%d)\n", ret); 3133 3134 spin_lock_irqsave(&il->sta_lock, flags); 3135 il->stations[sta_id].lq = link_cmd; 3136 spin_unlock_irqrestore(&il->sta_lock, flags); 3137 3138 return 0; 3139 } 3140 3141 static int 3142 il4965_static_wepkey_cmd(struct il_priv *il, bool send_if_empty) 3143 { 3144 int i; 3145 u8 buff[sizeof(struct il_wep_cmd) + 3146 sizeof(struct il_wep_key) * WEP_KEYS_MAX]; 3147 struct il_wep_cmd *wep_cmd = (struct il_wep_cmd *)buff; 3148 size_t cmd_size = sizeof(struct il_wep_cmd); 3149 struct il_host_cmd cmd = { 3150 .id = C_WEPKEY, 3151 .data = wep_cmd, 3152 .flags = CMD_SYNC, 3153 }; 3154 bool not_empty = false; 3155 3156 might_sleep(); 3157 3158 memset(wep_cmd, 0, 3159 cmd_size + (sizeof(struct il_wep_key) * WEP_KEYS_MAX)); 3160 3161 for (i = 0; i < WEP_KEYS_MAX; i++) { 3162 u8 key_size = il->_4965.wep_keys[i].key_size; 3163 3164 wep_cmd->key[i].key_idx = i; 3165 if (key_size) { 3166 wep_cmd->key[i].key_offset = i; 3167 not_empty = true; 3168 } else 3169 wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET; 3170 3171 wep_cmd->key[i].key_size = key_size; 3172 memcpy(&wep_cmd->key[i].key[3], il->_4965.wep_keys[i].key, key_size); 3173 } 3174 3175 wep_cmd->global_key_type = WEP_KEY_WEP_TYPE; 3176 wep_cmd->num_keys = WEP_KEYS_MAX; 3177 3178 cmd_size += sizeof(struct il_wep_key) * WEP_KEYS_MAX; 3179 cmd.len = cmd_size; 3180 3181 if (not_empty || send_if_empty) 3182 return il_send_cmd(il, &cmd); 3183 else 3184 return 0; 3185 } 3186 3187 int 3188 il4965_restore_default_wep_keys(struct il_priv *il) 3189 { 3190 lockdep_assert_held(&il->mutex); 3191 3192 return il4965_static_wepkey_cmd(il, false); 3193 } 3194 3195 int 3196 il4965_remove_default_wep_key(struct il_priv *il, 3197 struct ieee80211_key_conf *keyconf) 3198 { 3199 int ret; 3200 int idx = keyconf->keyidx; 3201 3202 lockdep_assert_held(&il->mutex); 3203 3204 D_WEP("Removing default WEP key: idx=%d\n", idx); 3205 3206 memset(&il->_4965.wep_keys[idx], 0, sizeof(struct il_wep_key)); 3207 if (il_is_rfkill(il)) { 3208 D_WEP("Not sending C_WEPKEY command due to RFKILL.\n"); 3209 /* but keys in device are clear anyway so return success */ 3210 return 0; 3211 } 3212 ret = il4965_static_wepkey_cmd(il, 1); 3213 D_WEP("Remove default WEP key: idx=%d ret=%d\n", idx, ret); 3214 3215 return ret; 3216 } 3217 3218 int 3219 il4965_set_default_wep_key(struct il_priv *il, 3220 struct ieee80211_key_conf *keyconf) 3221 { 3222 int ret; 3223 int len = keyconf->keylen; 3224 int idx = keyconf->keyidx; 3225 3226 lockdep_assert_held(&il->mutex); 3227 3228 if (len != WEP_KEY_LEN_128 && len != WEP_KEY_LEN_64) { 3229 D_WEP("Bad WEP key length %d\n", keyconf->keylen); 3230 return -EINVAL; 3231 } 3232 3233 keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; 3234 keyconf->hw_key_idx = HW_KEY_DEFAULT; 3235 il->stations[IL_AP_ID].keyinfo.cipher = keyconf->cipher; 3236 3237 il->_4965.wep_keys[idx].key_size = len; 3238 memcpy(&il->_4965.wep_keys[idx].key, &keyconf->key, len); 3239 3240 ret = il4965_static_wepkey_cmd(il, false); 3241 3242 D_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", len, idx, ret); 3243 return ret; 3244 } 3245 3246 static int 3247 il4965_set_wep_dynamic_key_info(struct il_priv *il, 3248 struct ieee80211_key_conf *keyconf, u8 sta_id) 3249 { 3250 unsigned long flags; 3251 __le16 key_flags = 0; 3252 struct il_addsta_cmd sta_cmd; 3253 3254 lockdep_assert_held(&il->mutex); 3255 3256 keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; 3257 3258 key_flags |= (STA_KEY_FLG_WEP | STA_KEY_FLG_MAP_KEY_MSK); 3259 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); 3260 key_flags &= ~STA_KEY_FLG_INVALID; 3261 3262 if (keyconf->keylen == WEP_KEY_LEN_128) 3263 key_flags |= STA_KEY_FLG_KEY_SIZE_MSK; 3264 3265 if (sta_id == il->hw_params.bcast_id) 3266 key_flags |= STA_KEY_MULTICAST_MSK; 3267 3268 spin_lock_irqsave(&il->sta_lock, flags); 3269 3270 il->stations[sta_id].keyinfo.cipher = keyconf->cipher; 3271 il->stations[sta_id].keyinfo.keylen = keyconf->keylen; 3272 il->stations[sta_id].keyinfo.keyidx = keyconf->keyidx; 3273 3274 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); 3275 3276 memcpy(&il->stations[sta_id].sta.key.key[3], keyconf->key, 3277 keyconf->keylen); 3278 3279 if ((il->stations[sta_id].sta.key. 3280 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) 3281 il->stations[sta_id].sta.key.key_offset = 3282 il_get_free_ucode_key_idx(il); 3283 /* else, we are overriding an existing key => no need to allocated room 3284 * in uCode. */ 3285 3286 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, 3287 "no space for a new key"); 3288 3289 il->stations[sta_id].sta.key.key_flags = key_flags; 3290 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 3291 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3292 3293 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3294 sizeof(struct il_addsta_cmd)); 3295 spin_unlock_irqrestore(&il->sta_lock, flags); 3296 3297 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3298 } 3299 3300 static int 3301 il4965_set_ccmp_dynamic_key_info(struct il_priv *il, 3302 struct ieee80211_key_conf *keyconf, u8 sta_id) 3303 { 3304 unsigned long flags; 3305 __le16 key_flags = 0; 3306 struct il_addsta_cmd sta_cmd; 3307 3308 lockdep_assert_held(&il->mutex); 3309 3310 key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); 3311 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); 3312 key_flags &= ~STA_KEY_FLG_INVALID; 3313 3314 if (sta_id == il->hw_params.bcast_id) 3315 key_flags |= STA_KEY_MULTICAST_MSK; 3316 3317 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 3318 3319 spin_lock_irqsave(&il->sta_lock, flags); 3320 il->stations[sta_id].keyinfo.cipher = keyconf->cipher; 3321 il->stations[sta_id].keyinfo.keylen = keyconf->keylen; 3322 3323 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); 3324 3325 memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); 3326 3327 if ((il->stations[sta_id].sta.key. 3328 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) 3329 il->stations[sta_id].sta.key.key_offset = 3330 il_get_free_ucode_key_idx(il); 3331 /* else, we are overriding an existing key => no need to allocated room 3332 * in uCode. */ 3333 3334 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, 3335 "no space for a new key"); 3336 3337 il->stations[sta_id].sta.key.key_flags = key_flags; 3338 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 3339 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3340 3341 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3342 sizeof(struct il_addsta_cmd)); 3343 spin_unlock_irqrestore(&il->sta_lock, flags); 3344 3345 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3346 } 3347 3348 static int 3349 il4965_set_tkip_dynamic_key_info(struct il_priv *il, 3350 struct ieee80211_key_conf *keyconf, u8 sta_id) 3351 { 3352 unsigned long flags; 3353 int ret = 0; 3354 __le16 key_flags = 0; 3355 3356 key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); 3357 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); 3358 key_flags &= ~STA_KEY_FLG_INVALID; 3359 3360 if (sta_id == il->hw_params.bcast_id) 3361 key_flags |= STA_KEY_MULTICAST_MSK; 3362 3363 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 3364 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; 3365 3366 spin_lock_irqsave(&il->sta_lock, flags); 3367 3368 il->stations[sta_id].keyinfo.cipher = keyconf->cipher; 3369 il->stations[sta_id].keyinfo.keylen = 16; 3370 3371 if ((il->stations[sta_id].sta.key. 3372 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) 3373 il->stations[sta_id].sta.key.key_offset = 3374 il_get_free_ucode_key_idx(il); 3375 /* else, we are overriding an existing key => no need to allocated room 3376 * in uCode. */ 3377 3378 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, 3379 "no space for a new key"); 3380 3381 il->stations[sta_id].sta.key.key_flags = key_flags; 3382 3383 /* This copy is acutally not needed: we get the key with each TX */ 3384 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, 16); 3385 3386 memcpy(il->stations[sta_id].sta.key.key, keyconf->key, 16); 3387 3388 spin_unlock_irqrestore(&il->sta_lock, flags); 3389 3390 return ret; 3391 } 3392 3393 void 3394 il4965_update_tkip_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, 3395 struct ieee80211_sta *sta, u32 iv32, u16 *phase1key) 3396 { 3397 u8 sta_id; 3398 unsigned long flags; 3399 int i; 3400 3401 if (il_scan_cancel(il)) { 3402 /* cancel scan failed, just live w/ bad key and rely 3403 briefly on SW decryption */ 3404 return; 3405 } 3406 3407 sta_id = il_sta_id_or_broadcast(il, sta); 3408 if (sta_id == IL_INVALID_STATION) 3409 return; 3410 3411 spin_lock_irqsave(&il->sta_lock, flags); 3412 3413 il->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; 3414 3415 for (i = 0; i < 5; i++) 3416 il->stations[sta_id].sta.key.tkip_rx_ttak[i] = 3417 cpu_to_le16(phase1key[i]); 3418 3419 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 3420 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3421 3422 il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); 3423 3424 spin_unlock_irqrestore(&il->sta_lock, flags); 3425 } 3426 3427 int 3428 il4965_remove_dynamic_key(struct il_priv *il, 3429 struct ieee80211_key_conf *keyconf, u8 sta_id) 3430 { 3431 unsigned long flags; 3432 u16 key_flags; 3433 u8 keyidx; 3434 struct il_addsta_cmd sta_cmd; 3435 3436 lockdep_assert_held(&il->mutex); 3437 3438 il->_4965.key_mapping_keys--; 3439 3440 spin_lock_irqsave(&il->sta_lock, flags); 3441 key_flags = le16_to_cpu(il->stations[sta_id].sta.key.key_flags); 3442 keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3; 3443 3444 D_WEP("Remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id); 3445 3446 if (keyconf->keyidx != keyidx) { 3447 /* We need to remove a key with idx different that the one 3448 * in the uCode. This means that the key we need to remove has 3449 * been replaced by another one with different idx. 3450 * Don't do anything and return ok 3451 */ 3452 spin_unlock_irqrestore(&il->sta_lock, flags); 3453 return 0; 3454 } 3455 3456 if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) { 3457 IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx, 3458 key_flags); 3459 spin_unlock_irqrestore(&il->sta_lock, flags); 3460 return 0; 3461 } 3462 3463 if (!test_and_clear_bit 3464 (il->stations[sta_id].sta.key.key_offset, &il->ucode_key_table)) 3465 IL_ERR("idx %d not used in uCode key table.\n", 3466 il->stations[sta_id].sta.key.key_offset); 3467 memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key)); 3468 memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo)); 3469 il->stations[sta_id].sta.key.key_flags = 3470 STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; 3471 il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx; 3472 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 3473 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3474 3475 if (il_is_rfkill(il)) { 3476 D_WEP 3477 ("Not sending C_ADD_STA command because RFKILL enabled.\n"); 3478 spin_unlock_irqrestore(&il->sta_lock, flags); 3479 return 0; 3480 } 3481 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3482 sizeof(struct il_addsta_cmd)); 3483 spin_unlock_irqrestore(&il->sta_lock, flags); 3484 3485 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3486 } 3487 3488 int 3489 il4965_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, 3490 u8 sta_id) 3491 { 3492 int ret; 3493 3494 lockdep_assert_held(&il->mutex); 3495 3496 il->_4965.key_mapping_keys++; 3497 keyconf->hw_key_idx = HW_KEY_DYNAMIC; 3498 3499 switch (keyconf->cipher) { 3500 case WLAN_CIPHER_SUITE_CCMP: 3501 ret = 3502 il4965_set_ccmp_dynamic_key_info(il, keyconf, sta_id); 3503 break; 3504 case WLAN_CIPHER_SUITE_TKIP: 3505 ret = 3506 il4965_set_tkip_dynamic_key_info(il, keyconf, sta_id); 3507 break; 3508 case WLAN_CIPHER_SUITE_WEP40: 3509 case WLAN_CIPHER_SUITE_WEP104: 3510 ret = il4965_set_wep_dynamic_key_info(il, keyconf, sta_id); 3511 break; 3512 default: 3513 IL_ERR("Unknown alg: %s cipher = %x\n", __func__, 3514 keyconf->cipher); 3515 ret = -EINVAL; 3516 } 3517 3518 D_WEP("Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n", 3519 keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret); 3520 3521 return ret; 3522 } 3523 3524 /** 3525 * il4965_alloc_bcast_station - add broadcast station into driver's station table. 3526 * 3527 * This adds the broadcast station into the driver's station table 3528 * and marks it driver active, so that it will be restored to the 3529 * device at the next best time. 3530 */ 3531 int 3532 il4965_alloc_bcast_station(struct il_priv *il) 3533 { 3534 struct il_link_quality_cmd *link_cmd; 3535 unsigned long flags; 3536 u8 sta_id; 3537 3538 spin_lock_irqsave(&il->sta_lock, flags); 3539 sta_id = il_prep_station(il, il_bcast_addr, false, NULL); 3540 if (sta_id == IL_INVALID_STATION) { 3541 IL_ERR("Unable to prepare broadcast station\n"); 3542 spin_unlock_irqrestore(&il->sta_lock, flags); 3543 3544 return -EINVAL; 3545 } 3546 3547 il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE; 3548 il->stations[sta_id].used |= IL_STA_BCAST; 3549 spin_unlock_irqrestore(&il->sta_lock, flags); 3550 3551 link_cmd = il4965_sta_alloc_lq(il, sta_id); 3552 if (!link_cmd) { 3553 IL_ERR 3554 ("Unable to initialize rate scaling for bcast station.\n"); 3555 return -ENOMEM; 3556 } 3557 3558 spin_lock_irqsave(&il->sta_lock, flags); 3559 il->stations[sta_id].lq = link_cmd; 3560 spin_unlock_irqrestore(&il->sta_lock, flags); 3561 3562 return 0; 3563 } 3564 3565 /** 3566 * il4965_update_bcast_station - update broadcast station's LQ command 3567 * 3568 * Only used by iwl4965. Placed here to have all bcast station management 3569 * code together. 3570 */ 3571 static int 3572 il4965_update_bcast_station(struct il_priv *il) 3573 { 3574 unsigned long flags; 3575 struct il_link_quality_cmd *link_cmd; 3576 u8 sta_id = il->hw_params.bcast_id; 3577 3578 link_cmd = il4965_sta_alloc_lq(il, sta_id); 3579 if (!link_cmd) { 3580 IL_ERR("Unable to initialize rate scaling for bcast sta.\n"); 3581 return -ENOMEM; 3582 } 3583 3584 spin_lock_irqsave(&il->sta_lock, flags); 3585 if (il->stations[sta_id].lq) 3586 kfree(il->stations[sta_id].lq); 3587 else 3588 D_INFO("Bcast sta rate scaling has not been initialized.\n"); 3589 il->stations[sta_id].lq = link_cmd; 3590 spin_unlock_irqrestore(&il->sta_lock, flags); 3591 3592 return 0; 3593 } 3594 3595 int 3596 il4965_update_bcast_stations(struct il_priv *il) 3597 { 3598 return il4965_update_bcast_station(il); 3599 } 3600 3601 /** 3602 * il4965_sta_tx_modify_enable_tid - Enable Tx for this TID in station table 3603 */ 3604 int 3605 il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid) 3606 { 3607 unsigned long flags; 3608 struct il_addsta_cmd sta_cmd; 3609 3610 lockdep_assert_held(&il->mutex); 3611 3612 /* Remove "disable" flag, to enable Tx for this TID */ 3613 spin_lock_irqsave(&il->sta_lock, flags); 3614 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; 3615 il->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); 3616 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3617 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3618 sizeof(struct il_addsta_cmd)); 3619 spin_unlock_irqrestore(&il->sta_lock, flags); 3620 3621 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3622 } 3623 3624 int 3625 il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, int tid, 3626 u16 ssn) 3627 { 3628 unsigned long flags; 3629 int sta_id; 3630 struct il_addsta_cmd sta_cmd; 3631 3632 lockdep_assert_held(&il->mutex); 3633 3634 sta_id = il_sta_id(sta); 3635 if (sta_id == IL_INVALID_STATION) 3636 return -ENXIO; 3637 3638 spin_lock_irqsave(&il->sta_lock, flags); 3639 il->stations[sta_id].sta.station_flags_msk = 0; 3640 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; 3641 il->stations[sta_id].sta.add_immediate_ba_tid = (u8) tid; 3642 il->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); 3643 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3644 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3645 sizeof(struct il_addsta_cmd)); 3646 spin_unlock_irqrestore(&il->sta_lock, flags); 3647 3648 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3649 } 3650 3651 int 3652 il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, int tid) 3653 { 3654 unsigned long flags; 3655 int sta_id; 3656 struct il_addsta_cmd sta_cmd; 3657 3658 lockdep_assert_held(&il->mutex); 3659 3660 sta_id = il_sta_id(sta); 3661 if (sta_id == IL_INVALID_STATION) { 3662 IL_ERR("Invalid station for AGG tid %d\n", tid); 3663 return -ENXIO; 3664 } 3665 3666 spin_lock_irqsave(&il->sta_lock, flags); 3667 il->stations[sta_id].sta.station_flags_msk = 0; 3668 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; 3669 il->stations[sta_id].sta.remove_immediate_ba_tid = (u8) tid; 3670 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3671 memcpy(&sta_cmd, &il->stations[sta_id].sta, 3672 sizeof(struct il_addsta_cmd)); 3673 spin_unlock_irqrestore(&il->sta_lock, flags); 3674 3675 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 3676 } 3677 3678 void 3679 il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt) 3680 { 3681 unsigned long flags; 3682 3683 spin_lock_irqsave(&il->sta_lock, flags); 3684 il->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK; 3685 il->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; 3686 il->stations[sta_id].sta.sta.modify_mask = 3687 STA_MODIFY_SLEEP_TX_COUNT_MSK; 3688 il->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt); 3689 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 3690 il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); 3691 spin_unlock_irqrestore(&il->sta_lock, flags); 3692 3693 } 3694 3695 void 3696 il4965_update_chain_flags(struct il_priv *il) 3697 { 3698 if (il->ops->set_rxon_chain) { 3699 il->ops->set_rxon_chain(il); 3700 if (il->active.rx_chain != il->staging.rx_chain) 3701 il_commit_rxon(il); 3702 } 3703 } 3704 3705 static void 3706 il4965_clear_free_frames(struct il_priv *il) 3707 { 3708 struct list_head *element; 3709 3710 D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count); 3711 3712 while (!list_empty(&il->free_frames)) { 3713 element = il->free_frames.next; 3714 list_del(element); 3715 kfree(list_entry(element, struct il_frame, list)); 3716 il->frames_count--; 3717 } 3718 3719 if (il->frames_count) { 3720 IL_WARN("%d frames still in use. Did we lose one?\n", 3721 il->frames_count); 3722 il->frames_count = 0; 3723 } 3724 } 3725 3726 static struct il_frame * 3727 il4965_get_free_frame(struct il_priv *il) 3728 { 3729 struct il_frame *frame; 3730 struct list_head *element; 3731 if (list_empty(&il->free_frames)) { 3732 frame = kzalloc(sizeof(*frame), GFP_KERNEL); 3733 if (!frame) { 3734 IL_ERR("Could not allocate frame!\n"); 3735 return NULL; 3736 } 3737 3738 il->frames_count++; 3739 return frame; 3740 } 3741 3742 element = il->free_frames.next; 3743 list_del(element); 3744 return list_entry(element, struct il_frame, list); 3745 } 3746 3747 static void 3748 il4965_free_frame(struct il_priv *il, struct il_frame *frame) 3749 { 3750 memset(frame, 0, sizeof(*frame)); 3751 list_add(&frame->list, &il->free_frames); 3752 } 3753 3754 static u32 3755 il4965_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr, 3756 int left) 3757 { 3758 lockdep_assert_held(&il->mutex); 3759 3760 if (!il->beacon_skb) 3761 return 0; 3762 3763 if (il->beacon_skb->len > left) 3764 return 0; 3765 3766 memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len); 3767 3768 return il->beacon_skb->len; 3769 } 3770 3771 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ 3772 static void 3773 il4965_set_beacon_tim(struct il_priv *il, 3774 struct il_tx_beacon_cmd *tx_beacon_cmd, u8 * beacon, 3775 u32 frame_size) 3776 { 3777 u16 tim_idx; 3778 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; 3779 3780 /* 3781 * The idx is relative to frame start but we start looking at the 3782 * variable-length part of the beacon. 3783 */ 3784 tim_idx = mgmt->u.beacon.variable - beacon; 3785 3786 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ 3787 while ((tim_idx < (frame_size - 2)) && 3788 (beacon[tim_idx] != WLAN_EID_TIM)) 3789 tim_idx += beacon[tim_idx + 1] + 2; 3790 3791 /* If TIM field was found, set variables */ 3792 if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { 3793 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); 3794 tx_beacon_cmd->tim_size = beacon[tim_idx + 1]; 3795 } else 3796 IL_WARN("Unable to find TIM Element in beacon\n"); 3797 } 3798 3799 static unsigned int 3800 il4965_hw_get_beacon_cmd(struct il_priv *il, struct il_frame *frame) 3801 { 3802 struct il_tx_beacon_cmd *tx_beacon_cmd; 3803 u32 frame_size; 3804 u32 rate_flags; 3805 u32 rate; 3806 /* 3807 * We have to set up the TX command, the TX Beacon command, and the 3808 * beacon contents. 3809 */ 3810 3811 lockdep_assert_held(&il->mutex); 3812 3813 if (!il->beacon_enabled) { 3814 IL_ERR("Trying to build beacon without beaconing enabled\n"); 3815 return 0; 3816 } 3817 3818 /* Initialize memory */ 3819 tx_beacon_cmd = &frame->u.beacon; 3820 memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); 3821 3822 /* Set up TX beacon contents */ 3823 frame_size = 3824 il4965_fill_beacon_frame(il, tx_beacon_cmd->frame, 3825 sizeof(frame->u) - sizeof(*tx_beacon_cmd)); 3826 if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE)) 3827 return 0; 3828 if (!frame_size) 3829 return 0; 3830 3831 /* Set up TX command fields */ 3832 tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size); 3833 tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id; 3834 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 3835 tx_beacon_cmd->tx.tx_flags = 3836 TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK | 3837 TX_CMD_FLG_STA_RATE_MSK; 3838 3839 /* Set up TX beacon command fields */ 3840 il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *) tx_beacon_cmd->frame, 3841 frame_size); 3842 3843 /* Set up packet rate and flags */ 3844 rate = il_get_lowest_plcp(il); 3845 il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); 3846 rate_flags = BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; 3847 if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE)) 3848 rate_flags |= RATE_MCS_CCK_MSK; 3849 tx_beacon_cmd->tx.rate_n_flags = cpu_to_le32(rate | rate_flags); 3850 3851 return sizeof(*tx_beacon_cmd) + frame_size; 3852 } 3853 3854 int 3855 il4965_send_beacon_cmd(struct il_priv *il) 3856 { 3857 struct il_frame *frame; 3858 unsigned int frame_size; 3859 int rc; 3860 3861 frame = il4965_get_free_frame(il); 3862 if (!frame) { 3863 IL_ERR("Could not obtain free frame buffer for beacon " 3864 "command.\n"); 3865 return -ENOMEM; 3866 } 3867 3868 frame_size = il4965_hw_get_beacon_cmd(il, frame); 3869 if (!frame_size) { 3870 IL_ERR("Error configuring the beacon command\n"); 3871 il4965_free_frame(il, frame); 3872 return -EINVAL; 3873 } 3874 3875 rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]); 3876 3877 il4965_free_frame(il, frame); 3878 3879 return rc; 3880 } 3881 3882 static inline dma_addr_t 3883 il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx) 3884 { 3885 struct il_tfd_tb *tb = &tfd->tbs[idx]; 3886 3887 dma_addr_t addr = get_unaligned_le32(&tb->lo); 3888 if (sizeof(dma_addr_t) > sizeof(u32)) 3889 addr |= 3890 ((dma_addr_t) (le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 3891 16; 3892 3893 return addr; 3894 } 3895 3896 static inline u16 3897 il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx) 3898 { 3899 struct il_tfd_tb *tb = &tfd->tbs[idx]; 3900 3901 return le16_to_cpu(tb->hi_n_len) >> 4; 3902 } 3903 3904 static inline void 3905 il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx, dma_addr_t addr, u16 len) 3906 { 3907 struct il_tfd_tb *tb = &tfd->tbs[idx]; 3908 u16 hi_n_len = len << 4; 3909 3910 put_unaligned_le32(addr, &tb->lo); 3911 if (sizeof(dma_addr_t) > sizeof(u32)) 3912 hi_n_len |= ((addr >> 16) >> 16) & 0xF; 3913 3914 tb->hi_n_len = cpu_to_le16(hi_n_len); 3915 3916 tfd->num_tbs = idx + 1; 3917 } 3918 3919 static inline u8 3920 il4965_tfd_get_num_tbs(struct il_tfd *tfd) 3921 { 3922 return tfd->num_tbs & 0x1f; 3923 } 3924 3925 /** 3926 * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] 3927 * @il - driver ilate data 3928 * @txq - tx queue 3929 * 3930 * Does NOT advance any TFD circular buffer read/write idxes 3931 * Does NOT free the TFD itself (which is within circular buffer) 3932 */ 3933 void 3934 il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq) 3935 { 3936 struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds; 3937 struct il_tfd *tfd; 3938 struct pci_dev *dev = il->pci_dev; 3939 int idx = txq->q.read_ptr; 3940 int i; 3941 int num_tbs; 3942 3943 tfd = &tfd_tmp[idx]; 3944 3945 /* Sanity check on number of chunks */ 3946 num_tbs = il4965_tfd_get_num_tbs(tfd); 3947 3948 if (num_tbs >= IL_NUM_OF_TBS) { 3949 IL_ERR("Too many chunks: %i\n", num_tbs); 3950 /* @todo issue fatal error, it is quite serious situation */ 3951 return; 3952 } 3953 3954 /* Unmap tx_cmd */ 3955 if (num_tbs) 3956 pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping), 3957 dma_unmap_len(&txq->meta[idx], len), 3958 PCI_DMA_BIDIRECTIONAL); 3959 3960 /* Unmap chunks, if any. */ 3961 for (i = 1; i < num_tbs; i++) 3962 pci_unmap_single(dev, il4965_tfd_tb_get_addr(tfd, i), 3963 il4965_tfd_tb_get_len(tfd, i), 3964 PCI_DMA_TODEVICE); 3965 3966 /* free SKB */ 3967 if (txq->skbs) { 3968 struct sk_buff *skb = txq->skbs[txq->q.read_ptr]; 3969 3970 /* can be called from irqs-disabled context */ 3971 if (skb) { 3972 dev_kfree_skb_any(skb); 3973 txq->skbs[txq->q.read_ptr] = NULL; 3974 } 3975 } 3976 } 3977 3978 int 3979 il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, 3980 dma_addr_t addr, u16 len, u8 reset, u8 pad) 3981 { 3982 struct il_queue *q; 3983 struct il_tfd *tfd, *tfd_tmp; 3984 u32 num_tbs; 3985 3986 q = &txq->q; 3987 tfd_tmp = (struct il_tfd *)txq->tfds; 3988 tfd = &tfd_tmp[q->write_ptr]; 3989 3990 if (reset) 3991 memset(tfd, 0, sizeof(*tfd)); 3992 3993 num_tbs = il4965_tfd_get_num_tbs(tfd); 3994 3995 /* Each TFD can point to a maximum 20 Tx buffers */ 3996 if (num_tbs >= IL_NUM_OF_TBS) { 3997 IL_ERR("Error can not send more than %d chunks\n", 3998 IL_NUM_OF_TBS); 3999 return -EINVAL; 4000 } 4001 4002 BUG_ON(addr & ~DMA_BIT_MASK(36)); 4003 if (unlikely(addr & ~IL_TX_DMA_MASK)) 4004 IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr); 4005 4006 il4965_tfd_set_tb(tfd, num_tbs, addr, len); 4007 4008 return 0; 4009 } 4010 4011 /* 4012 * Tell nic where to find circular buffer of Tx Frame Descriptors for 4013 * given Tx queue, and enable the DMA channel used for that queue. 4014 * 4015 * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA 4016 * channels supported in hardware. 4017 */ 4018 int 4019 il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq) 4020 { 4021 int txq_id = txq->q.id; 4022 4023 /* Circular buffer (TFD queue in DRAM) physical base address */ 4024 il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8); 4025 4026 return 0; 4027 } 4028 4029 /****************************************************************************** 4030 * 4031 * Generic RX handler implementations 4032 * 4033 ******************************************************************************/ 4034 static void 4035 il4965_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb) 4036 { 4037 struct il_rx_pkt *pkt = rxb_addr(rxb); 4038 struct il_alive_resp *palive; 4039 struct delayed_work *pwork; 4040 4041 palive = &pkt->u.alive_frame; 4042 4043 D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n", 4044 palive->is_valid, palive->ver_type, palive->ver_subtype); 4045 4046 if (palive->ver_subtype == INITIALIZE_SUBTYPE) { 4047 D_INFO("Initialization Alive received.\n"); 4048 memcpy(&il->card_alive_init, &pkt->u.alive_frame, 4049 sizeof(struct il_init_alive_resp)); 4050 pwork = &il->init_alive_start; 4051 } else { 4052 D_INFO("Runtime Alive received.\n"); 4053 memcpy(&il->card_alive, &pkt->u.alive_frame, 4054 sizeof(struct il_alive_resp)); 4055 pwork = &il->alive_start; 4056 } 4057 4058 /* We delay the ALIVE response by 5ms to 4059 * give the HW RF Kill time to activate... */ 4060 if (palive->is_valid == UCODE_VALID_OK) 4061 queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5)); 4062 else 4063 IL_WARN("uCode did not respond OK.\n"); 4064 } 4065 4066 /** 4067 * il4965_bg_stats_periodic - Timer callback to queue stats 4068 * 4069 * This callback is provided in order to send a stats request. 4070 * 4071 * This timer function is continually reset to execute within 4072 * 60 seconds since the last N_STATS was received. We need to 4073 * ensure we receive the stats in order to update the temperature 4074 * used for calibrating the TXPOWER. 4075 */ 4076 static void 4077 il4965_bg_stats_periodic(struct timer_list *t) 4078 { 4079 struct il_priv *il = from_timer(il, t, stats_periodic); 4080 4081 if (test_bit(S_EXIT_PENDING, &il->status)) 4082 return; 4083 4084 /* dont send host command if rf-kill is on */ 4085 if (!il_is_ready_rf(il)) 4086 return; 4087 4088 il_send_stats_request(il, CMD_ASYNC, false); 4089 } 4090 4091 static void 4092 il4965_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb) 4093 { 4094 struct il_rx_pkt *pkt = rxb_addr(rxb); 4095 struct il4965_beacon_notif *beacon = 4096 (struct il4965_beacon_notif *)pkt->u.raw; 4097 #ifdef CONFIG_IWLEGACY_DEBUG 4098 u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); 4099 4100 D_RX("beacon status %x retries %d iss %d tsf:0x%.8x%.8x rate %d\n", 4101 le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, 4102 beacon->beacon_notify_hdr.failure_frame, 4103 le32_to_cpu(beacon->ibss_mgr_status), 4104 le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate); 4105 #endif 4106 il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); 4107 } 4108 4109 static void 4110 il4965_perform_ct_kill_task(struct il_priv *il) 4111 { 4112 unsigned long flags; 4113 4114 D_POWER("Stop all queues\n"); 4115 4116 if (il->mac80211_registered) 4117 ieee80211_stop_queues(il->hw); 4118 4119 _il_wr(il, CSR_UCODE_DRV_GP1_SET, 4120 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); 4121 _il_rd(il, CSR_UCODE_DRV_GP1); 4122 4123 spin_lock_irqsave(&il->reg_lock, flags); 4124 if (likely(_il_grab_nic_access(il))) 4125 _il_release_nic_access(il); 4126 spin_unlock_irqrestore(&il->reg_lock, flags); 4127 } 4128 4129 /* Handle notification from uCode that card's power state is changing 4130 * due to software, hardware, or critical temperature RFKILL */ 4131 static void 4132 il4965_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb) 4133 { 4134 struct il_rx_pkt *pkt = rxb_addr(rxb); 4135 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); 4136 unsigned long status = il->status; 4137 4138 D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n", 4139 (flags & HW_CARD_DISABLED) ? "Kill" : "On", 4140 (flags & SW_CARD_DISABLED) ? "Kill" : "On", 4141 (flags & CT_CARD_DISABLED) ? "Reached" : "Not reached"); 4142 4143 if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | CT_CARD_DISABLED)) { 4144 4145 _il_wr(il, CSR_UCODE_DRV_GP1_SET, 4146 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 4147 4148 il_wr(il, HBUS_TARG_MBX_C, HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); 4149 4150 if (!(flags & RXON_CARD_DISABLED)) { 4151 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, 4152 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 4153 il_wr(il, HBUS_TARG_MBX_C, 4154 HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); 4155 } 4156 } 4157 4158 if (flags & CT_CARD_DISABLED) 4159 il4965_perform_ct_kill_task(il); 4160 4161 if (flags & HW_CARD_DISABLED) 4162 set_bit(S_RFKILL, &il->status); 4163 else 4164 clear_bit(S_RFKILL, &il->status); 4165 4166 if (!(flags & RXON_CARD_DISABLED)) 4167 il_scan_cancel(il); 4168 4169 if ((test_bit(S_RFKILL, &status) != 4170 test_bit(S_RFKILL, &il->status))) 4171 wiphy_rfkill_set_hw_state(il->hw->wiphy, 4172 test_bit(S_RFKILL, &il->status)); 4173 else 4174 wake_up(&il->wait_command_queue); 4175 } 4176 4177 /** 4178 * il4965_setup_handlers - Initialize Rx handler callbacks 4179 * 4180 * Setup the RX handlers for each of the reply types sent from the uCode 4181 * to the host. 4182 * 4183 * This function chains into the hardware specific files for them to setup 4184 * any hardware specific handlers as well. 4185 */ 4186 static void 4187 il4965_setup_handlers(struct il_priv *il) 4188 { 4189 il->handlers[N_ALIVE] = il4965_hdl_alive; 4190 il->handlers[N_ERROR] = il_hdl_error; 4191 il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa; 4192 il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement; 4193 il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep; 4194 il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats; 4195 il->handlers[N_BEACON] = il4965_hdl_beacon; 4196 4197 /* 4198 * The same handler is used for both the REPLY to a discrete 4199 * stats request from the host as well as for the periodic 4200 * stats notifications (after received beacons) from the uCode. 4201 */ 4202 il->handlers[C_STATS] = il4965_hdl_c_stats; 4203 il->handlers[N_STATS] = il4965_hdl_stats; 4204 4205 il_setup_rx_scan_handlers(il); 4206 4207 /* status change handler */ 4208 il->handlers[N_CARD_STATE] = il4965_hdl_card_state; 4209 4210 il->handlers[N_MISSED_BEACONS] = il4965_hdl_missed_beacon; 4211 /* Rx handlers */ 4212 il->handlers[N_RX_PHY] = il4965_hdl_rx_phy; 4213 il->handlers[N_RX_MPDU] = il4965_hdl_rx; 4214 il->handlers[N_RX] = il4965_hdl_rx; 4215 /* block ack */ 4216 il->handlers[N_COMPRESSED_BA] = il4965_hdl_compressed_ba; 4217 /* Tx response */ 4218 il->handlers[C_TX] = il4965_hdl_tx; 4219 } 4220 4221 /** 4222 * il4965_rx_handle - Main entry function for receiving responses from uCode 4223 * 4224 * Uses the il->handlers callback function array to invoke 4225 * the appropriate handlers, including command responses, 4226 * frame-received notifications, and other notifications. 4227 */ 4228 void 4229 il4965_rx_handle(struct il_priv *il) 4230 { 4231 struct il_rx_buf *rxb; 4232 struct il_rx_pkt *pkt; 4233 struct il_rx_queue *rxq = &il->rxq; 4234 u32 r, i; 4235 int reclaim; 4236 unsigned long flags; 4237 u8 fill_rx = 0; 4238 u32 count = 8; 4239 int total_empty; 4240 4241 /* uCode's read idx (stored in shared DRAM) indicates the last Rx 4242 * buffer that the driver may process (last buffer filled by ucode). */ 4243 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; 4244 i = rxq->read; 4245 4246 /* Rx interrupt, but nothing sent from uCode */ 4247 if (i == r) 4248 D_RX("r = %d, i = %d\n", r, i); 4249 4250 /* calculate total frames need to be restock after handling RX */ 4251 total_empty = r - rxq->write_actual; 4252 if (total_empty < 0) 4253 total_empty += RX_QUEUE_SIZE; 4254 4255 if (total_empty > (RX_QUEUE_SIZE / 2)) 4256 fill_rx = 1; 4257 4258 while (i != r) { 4259 int len; 4260 4261 rxb = rxq->queue[i]; 4262 4263 /* If an RXB doesn't have a Rx queue slot associated with it, 4264 * then a bug has been introduced in the queue refilling 4265 * routines -- catch it here */ 4266 BUG_ON(rxb == NULL); 4267 4268 rxq->queue[i] = NULL; 4269 4270 pci_unmap_page(il->pci_dev, rxb->page_dma, 4271 PAGE_SIZE << il->hw_params.rx_page_order, 4272 PCI_DMA_FROMDEVICE); 4273 pkt = rxb_addr(rxb); 4274 4275 len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK; 4276 len += sizeof(u32); /* account for status word */ 4277 4278 reclaim = il_need_reclaim(il, pkt); 4279 4280 /* Based on type of command response or notification, 4281 * handle those that need handling via function in 4282 * handlers table. See il4965_setup_handlers() */ 4283 if (il->handlers[pkt->hdr.cmd]) { 4284 D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i, 4285 il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); 4286 il->isr_stats.handlers[pkt->hdr.cmd]++; 4287 il->handlers[pkt->hdr.cmd] (il, rxb); 4288 } else { 4289 /* No handling needed */ 4290 D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r, 4291 i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); 4292 } 4293 4294 /* 4295 * XXX: After here, we should always check rxb->page 4296 * against NULL before touching it or its virtual 4297 * memory (pkt). Because some handler might have 4298 * already taken or freed the pages. 4299 */ 4300 4301 if (reclaim) { 4302 /* Invoke any callbacks, transfer the buffer to caller, 4303 * and fire off the (possibly) blocking il_send_cmd() 4304 * as we reclaim the driver command queue */ 4305 if (rxb->page) 4306 il_tx_cmd_complete(il, rxb); 4307 else 4308 IL_WARN("Claim null rxb?\n"); 4309 } 4310 4311 /* Reuse the page if possible. For notification packets and 4312 * SKBs that fail to Rx correctly, add them back into the 4313 * rx_free list for reuse later. */ 4314 spin_lock_irqsave(&rxq->lock, flags); 4315 if (rxb->page != NULL) { 4316 rxb->page_dma = 4317 pci_map_page(il->pci_dev, rxb->page, 0, 4318 PAGE_SIZE << il->hw_params. 4319 rx_page_order, PCI_DMA_FROMDEVICE); 4320 4321 if (unlikely(pci_dma_mapping_error(il->pci_dev, 4322 rxb->page_dma))) { 4323 __il_free_pages(il, rxb->page); 4324 rxb->page = NULL; 4325 list_add_tail(&rxb->list, &rxq->rx_used); 4326 } else { 4327 list_add_tail(&rxb->list, &rxq->rx_free); 4328 rxq->free_count++; 4329 } 4330 } else 4331 list_add_tail(&rxb->list, &rxq->rx_used); 4332 4333 spin_unlock_irqrestore(&rxq->lock, flags); 4334 4335 i = (i + 1) & RX_QUEUE_MASK; 4336 /* If there are a lot of unused frames, 4337 * restock the Rx queue so ucode wont assert. */ 4338 if (fill_rx) { 4339 count++; 4340 if (count >= 8) { 4341 rxq->read = i; 4342 il4965_rx_replenish_now(il); 4343 count = 0; 4344 } 4345 } 4346 } 4347 4348 /* Backtrack one entry */ 4349 rxq->read = i; 4350 if (fill_rx) 4351 il4965_rx_replenish_now(il); 4352 else 4353 il4965_rx_queue_restock(il); 4354 } 4355 4356 /* call this function to flush any scheduled tasklet */ 4357 static inline void 4358 il4965_synchronize_irq(struct il_priv *il) 4359 { 4360 /* wait to make sure we flush pending tasklet */ 4361 synchronize_irq(il->pci_dev->irq); 4362 tasklet_kill(&il->irq_tasklet); 4363 } 4364 4365 static void 4366 il4965_irq_tasklet(struct il_priv *il) 4367 { 4368 u32 inta, handled = 0; 4369 u32 inta_fh; 4370 unsigned long flags; 4371 u32 i; 4372 #ifdef CONFIG_IWLEGACY_DEBUG 4373 u32 inta_mask; 4374 #endif 4375 4376 spin_lock_irqsave(&il->lock, flags); 4377 4378 /* Ack/clear/reset pending uCode interrupts. 4379 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, 4380 * and will clear only when CSR_FH_INT_STATUS gets cleared. */ 4381 inta = _il_rd(il, CSR_INT); 4382 _il_wr(il, CSR_INT, inta); 4383 4384 /* Ack/clear/reset pending flow-handler (DMA) interrupts. 4385 * Any new interrupts that happen after this, either while we're 4386 * in this tasklet, or later, will show up in next ISR/tasklet. */ 4387 inta_fh = _il_rd(il, CSR_FH_INT_STATUS); 4388 _il_wr(il, CSR_FH_INT_STATUS, inta_fh); 4389 4390 #ifdef CONFIG_IWLEGACY_DEBUG 4391 if (il_get_debug_level(il) & IL_DL_ISR) { 4392 /* just for debug */ 4393 inta_mask = _il_rd(il, CSR_INT_MASK); 4394 D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, 4395 inta_mask, inta_fh); 4396 } 4397 #endif 4398 4399 spin_unlock_irqrestore(&il->lock, flags); 4400 4401 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not 4402 * atomic, make sure that inta covers all the interrupts that 4403 * we've discovered, even if FH interrupt came in just after 4404 * reading CSR_INT. */ 4405 if (inta_fh & CSR49_FH_INT_RX_MASK) 4406 inta |= CSR_INT_BIT_FH_RX; 4407 if (inta_fh & CSR49_FH_INT_TX_MASK) 4408 inta |= CSR_INT_BIT_FH_TX; 4409 4410 /* Now service all interrupt bits discovered above. */ 4411 if (inta & CSR_INT_BIT_HW_ERR) { 4412 IL_ERR("Hardware error detected. Restarting.\n"); 4413 4414 /* Tell the device to stop sending interrupts */ 4415 il_disable_interrupts(il); 4416 4417 il->isr_stats.hw++; 4418 il_irq_handle_error(il); 4419 4420 handled |= CSR_INT_BIT_HW_ERR; 4421 4422 return; 4423 } 4424 #ifdef CONFIG_IWLEGACY_DEBUG 4425 if (il_get_debug_level(il) & (IL_DL_ISR)) { 4426 /* NIC fires this, but we don't use it, redundant with WAKEUP */ 4427 if (inta & CSR_INT_BIT_SCD) { 4428 D_ISR("Scheduler finished to transmit " 4429 "the frame/frames.\n"); 4430 il->isr_stats.sch++; 4431 } 4432 4433 /* Alive notification via Rx interrupt will do the real work */ 4434 if (inta & CSR_INT_BIT_ALIVE) { 4435 D_ISR("Alive interrupt\n"); 4436 il->isr_stats.alive++; 4437 } 4438 } 4439 #endif 4440 /* Safely ignore these bits for debug checks below */ 4441 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); 4442 4443 /* HW RF KILL switch toggled */ 4444 if (inta & CSR_INT_BIT_RF_KILL) { 4445 int hw_rf_kill = 0; 4446 4447 if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) 4448 hw_rf_kill = 1; 4449 4450 IL_WARN("RF_KILL bit toggled to %s.\n", 4451 hw_rf_kill ? "disable radio" : "enable radio"); 4452 4453 il->isr_stats.rfkill++; 4454 4455 /* driver only loads ucode once setting the interface up. 4456 * the driver allows loading the ucode even if the radio 4457 * is killed. Hence update the killswitch state here. The 4458 * rfkill handler will care about restarting if needed. 4459 */ 4460 if (hw_rf_kill) { 4461 set_bit(S_RFKILL, &il->status); 4462 } else { 4463 clear_bit(S_RFKILL, &il->status); 4464 il_force_reset(il, true); 4465 } 4466 wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); 4467 4468 handled |= CSR_INT_BIT_RF_KILL; 4469 } 4470 4471 /* Chip got too hot and stopped itself */ 4472 if (inta & CSR_INT_BIT_CT_KILL) { 4473 IL_ERR("Microcode CT kill error detected.\n"); 4474 il->isr_stats.ctkill++; 4475 handled |= CSR_INT_BIT_CT_KILL; 4476 } 4477 4478 /* Error detected by uCode */ 4479 if (inta & CSR_INT_BIT_SW_ERR) { 4480 IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n", 4481 inta); 4482 il->isr_stats.sw++; 4483 il_irq_handle_error(il); 4484 handled |= CSR_INT_BIT_SW_ERR; 4485 } 4486 4487 /* 4488 * uCode wakes up after power-down sleep. 4489 * Tell device about any new tx or host commands enqueued, 4490 * and about any Rx buffers made available while asleep. 4491 */ 4492 if (inta & CSR_INT_BIT_WAKEUP) { 4493 D_ISR("Wakeup interrupt\n"); 4494 il_rx_queue_update_write_ptr(il, &il->rxq); 4495 for (i = 0; i < il->hw_params.max_txq_num; i++) 4496 il_txq_update_write_ptr(il, &il->txq[i]); 4497 il->isr_stats.wakeup++; 4498 handled |= CSR_INT_BIT_WAKEUP; 4499 } 4500 4501 /* All uCode command responses, including Tx command responses, 4502 * Rx "responses" (frame-received notification), and other 4503 * notifications from uCode come through here*/ 4504 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { 4505 il4965_rx_handle(il); 4506 il->isr_stats.rx++; 4507 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); 4508 } 4509 4510 /* This "Tx" DMA channel is used only for loading uCode */ 4511 if (inta & CSR_INT_BIT_FH_TX) { 4512 D_ISR("uCode load interrupt\n"); 4513 il->isr_stats.tx++; 4514 handled |= CSR_INT_BIT_FH_TX; 4515 /* Wake up uCode load routine, now that load is complete */ 4516 il->ucode_write_complete = 1; 4517 wake_up(&il->wait_command_queue); 4518 } 4519 4520 if (inta & ~handled) { 4521 IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled); 4522 il->isr_stats.unhandled++; 4523 } 4524 4525 if (inta & ~(il->inta_mask)) { 4526 IL_WARN("Disabled INTA bits 0x%08x were pending\n", 4527 inta & ~il->inta_mask); 4528 IL_WARN(" with FH49_INT = 0x%08x\n", inta_fh); 4529 } 4530 4531 /* Re-enable all interrupts */ 4532 /* only Re-enable if disabled by irq */ 4533 if (test_bit(S_INT_ENABLED, &il->status)) 4534 il_enable_interrupts(il); 4535 /* Re-enable RF_KILL if it occurred */ 4536 else if (handled & CSR_INT_BIT_RF_KILL) 4537 il_enable_rfkill_int(il); 4538 4539 #ifdef CONFIG_IWLEGACY_DEBUG 4540 if (il_get_debug_level(il) & (IL_DL_ISR)) { 4541 inta = _il_rd(il, CSR_INT); 4542 inta_mask = _il_rd(il, CSR_INT_MASK); 4543 inta_fh = _il_rd(il, CSR_FH_INT_STATUS); 4544 D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " 4545 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); 4546 } 4547 #endif 4548 } 4549 4550 /***************************************************************************** 4551 * 4552 * sysfs attributes 4553 * 4554 *****************************************************************************/ 4555 4556 #ifdef CONFIG_IWLEGACY_DEBUG 4557 4558 /* 4559 * The following adds a new attribute to the sysfs representation 4560 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) 4561 * used for controlling the debug level. 4562 * 4563 * See the level definitions in iwl for details. 4564 * 4565 * The debug_level being managed using sysfs below is a per device debug 4566 * level that is used instead of the global debug level if it (the per 4567 * device debug level) is set. 4568 */ 4569 static ssize_t 4570 il4965_show_debug_level(struct device *d, struct device_attribute *attr, 4571 char *buf) 4572 { 4573 struct il_priv *il = dev_get_drvdata(d); 4574 return sprintf(buf, "0x%08X\n", il_get_debug_level(il)); 4575 } 4576 4577 static ssize_t 4578 il4965_store_debug_level(struct device *d, struct device_attribute *attr, 4579 const char *buf, size_t count) 4580 { 4581 struct il_priv *il = dev_get_drvdata(d); 4582 unsigned long val; 4583 int ret; 4584 4585 ret = kstrtoul(buf, 0, &val); 4586 if (ret) 4587 IL_ERR("%s is not in hex or decimal form.\n", buf); 4588 else 4589 il->debug_level = val; 4590 4591 return strnlen(buf, count); 4592 } 4593 4594 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il4965_show_debug_level, 4595 il4965_store_debug_level); 4596 4597 #endif /* CONFIG_IWLEGACY_DEBUG */ 4598 4599 static ssize_t 4600 il4965_show_temperature(struct device *d, struct device_attribute *attr, 4601 char *buf) 4602 { 4603 struct il_priv *il = dev_get_drvdata(d); 4604 4605 if (!il_is_alive(il)) 4606 return -EAGAIN; 4607 4608 return sprintf(buf, "%d\n", il->temperature); 4609 } 4610 4611 static DEVICE_ATTR(temperature, S_IRUGO, il4965_show_temperature, NULL); 4612 4613 static ssize_t 4614 il4965_show_tx_power(struct device *d, struct device_attribute *attr, char *buf) 4615 { 4616 struct il_priv *il = dev_get_drvdata(d); 4617 4618 if (!il_is_ready_rf(il)) 4619 return sprintf(buf, "off\n"); 4620 else 4621 return sprintf(buf, "%d\n", il->tx_power_user_lmt); 4622 } 4623 4624 static ssize_t 4625 il4965_store_tx_power(struct device *d, struct device_attribute *attr, 4626 const char *buf, size_t count) 4627 { 4628 struct il_priv *il = dev_get_drvdata(d); 4629 unsigned long val; 4630 int ret; 4631 4632 ret = kstrtoul(buf, 10, &val); 4633 if (ret) 4634 IL_INFO("%s is not in decimal form.\n", buf); 4635 else { 4636 ret = il_set_tx_power(il, val, false); 4637 if (ret) 4638 IL_ERR("failed setting tx power (0x%08x).\n", ret); 4639 else 4640 ret = count; 4641 } 4642 return ret; 4643 } 4644 4645 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il4965_show_tx_power, 4646 il4965_store_tx_power); 4647 4648 static struct attribute *il_sysfs_entries[] = { 4649 &dev_attr_temperature.attr, 4650 &dev_attr_tx_power.attr, 4651 #ifdef CONFIG_IWLEGACY_DEBUG 4652 &dev_attr_debug_level.attr, 4653 #endif 4654 NULL 4655 }; 4656 4657 static const struct attribute_group il_attribute_group = { 4658 .name = NULL, /* put in device directory */ 4659 .attrs = il_sysfs_entries, 4660 }; 4661 4662 /****************************************************************************** 4663 * 4664 * uCode download functions 4665 * 4666 ******************************************************************************/ 4667 4668 static void 4669 il4965_dealloc_ucode_pci(struct il_priv *il) 4670 { 4671 il_free_fw_desc(il->pci_dev, &il->ucode_code); 4672 il_free_fw_desc(il->pci_dev, &il->ucode_data); 4673 il_free_fw_desc(il->pci_dev, &il->ucode_data_backup); 4674 il_free_fw_desc(il->pci_dev, &il->ucode_init); 4675 il_free_fw_desc(il->pci_dev, &il->ucode_init_data); 4676 il_free_fw_desc(il->pci_dev, &il->ucode_boot); 4677 } 4678 4679 static void 4680 il4965_nic_start(struct il_priv *il) 4681 { 4682 /* Remove all resets to allow NIC to operate */ 4683 _il_wr(il, CSR_RESET, 0); 4684 } 4685 4686 static void il4965_ucode_callback(const struct firmware *ucode_raw, 4687 void *context); 4688 static int il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length); 4689 4690 static int __must_check 4691 il4965_request_firmware(struct il_priv *il, bool first) 4692 { 4693 const char *name_pre = il->cfg->fw_name_pre; 4694 char tag[8]; 4695 4696 if (first) { 4697 il->fw_idx = il->cfg->ucode_api_max; 4698 sprintf(tag, "%d", il->fw_idx); 4699 } else { 4700 il->fw_idx--; 4701 sprintf(tag, "%d", il->fw_idx); 4702 } 4703 4704 if (il->fw_idx < il->cfg->ucode_api_min) { 4705 IL_ERR("no suitable firmware found!\n"); 4706 return -ENOENT; 4707 } 4708 4709 sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); 4710 4711 D_INFO("attempting to load firmware '%s'\n", il->firmware_name); 4712 4713 return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name, 4714 &il->pci_dev->dev, GFP_KERNEL, il, 4715 il4965_ucode_callback); 4716 } 4717 4718 struct il4965_firmware_pieces { 4719 const void *inst, *data, *init, *init_data, *boot; 4720 size_t inst_size, data_size, init_size, init_data_size, boot_size; 4721 }; 4722 4723 static int 4724 il4965_load_firmware(struct il_priv *il, const struct firmware *ucode_raw, 4725 struct il4965_firmware_pieces *pieces) 4726 { 4727 struct il_ucode_header *ucode = (void *)ucode_raw->data; 4728 u32 api_ver, hdr_size; 4729 const u8 *src; 4730 4731 il->ucode_ver = le32_to_cpu(ucode->ver); 4732 api_ver = IL_UCODE_API(il->ucode_ver); 4733 4734 switch (api_ver) { 4735 default: 4736 case 0: 4737 case 1: 4738 case 2: 4739 hdr_size = 24; 4740 if (ucode_raw->size < hdr_size) { 4741 IL_ERR("File size too small!\n"); 4742 return -EINVAL; 4743 } 4744 pieces->inst_size = le32_to_cpu(ucode->v1.inst_size); 4745 pieces->data_size = le32_to_cpu(ucode->v1.data_size); 4746 pieces->init_size = le32_to_cpu(ucode->v1.init_size); 4747 pieces->init_data_size = le32_to_cpu(ucode->v1.init_data_size); 4748 pieces->boot_size = le32_to_cpu(ucode->v1.boot_size); 4749 src = ucode->v1.data; 4750 break; 4751 } 4752 4753 /* Verify size of file vs. image size info in file's header */ 4754 if (ucode_raw->size != 4755 hdr_size + pieces->inst_size + pieces->data_size + 4756 pieces->init_size + pieces->init_data_size + pieces->boot_size) { 4757 4758 IL_ERR("uCode file size %d does not match expected size\n", 4759 (int)ucode_raw->size); 4760 return -EINVAL; 4761 } 4762 4763 pieces->inst = src; 4764 src += pieces->inst_size; 4765 pieces->data = src; 4766 src += pieces->data_size; 4767 pieces->init = src; 4768 src += pieces->init_size; 4769 pieces->init_data = src; 4770 src += pieces->init_data_size; 4771 pieces->boot = src; 4772 src += pieces->boot_size; 4773 4774 return 0; 4775 } 4776 4777 /** 4778 * il4965_ucode_callback - callback when firmware was loaded 4779 * 4780 * If loaded successfully, copies the firmware into buffers 4781 * for the card to fetch (via DMA). 4782 */ 4783 static void 4784 il4965_ucode_callback(const struct firmware *ucode_raw, void *context) 4785 { 4786 struct il_priv *il = context; 4787 struct il_ucode_header *ucode; 4788 int err; 4789 struct il4965_firmware_pieces pieces; 4790 const unsigned int api_max = il->cfg->ucode_api_max; 4791 const unsigned int api_min = il->cfg->ucode_api_min; 4792 u32 api_ver; 4793 4794 u32 max_probe_length = 200; 4795 u32 standard_phy_calibration_size = 4796 IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; 4797 4798 memset(&pieces, 0, sizeof(pieces)); 4799 4800 if (!ucode_raw) { 4801 if (il->fw_idx <= il->cfg->ucode_api_max) 4802 IL_ERR("request for firmware file '%s' failed.\n", 4803 il->firmware_name); 4804 goto try_again; 4805 } 4806 4807 D_INFO("Loaded firmware file '%s' (%zd bytes).\n", il->firmware_name, 4808 ucode_raw->size); 4809 4810 /* Make sure that we got at least the API version number */ 4811 if (ucode_raw->size < 4) { 4812 IL_ERR("File size way too small!\n"); 4813 goto try_again; 4814 } 4815 4816 /* Data from ucode file: header followed by uCode images */ 4817 ucode = (struct il_ucode_header *)ucode_raw->data; 4818 4819 err = il4965_load_firmware(il, ucode_raw, &pieces); 4820 4821 if (err) 4822 goto try_again; 4823 4824 api_ver = IL_UCODE_API(il->ucode_ver); 4825 4826 /* 4827 * api_ver should match the api version forming part of the 4828 * firmware filename ... but we don't check for that and only rely 4829 * on the API version read from firmware header from here on forward 4830 */ 4831 if (api_ver < api_min || api_ver > api_max) { 4832 IL_ERR("Driver unable to support your firmware API. " 4833 "Driver supports v%u, firmware is v%u.\n", api_max, 4834 api_ver); 4835 goto try_again; 4836 } 4837 4838 if (api_ver != api_max) 4839 IL_ERR("Firmware has old API version. Expected v%u, " 4840 "got v%u. New firmware can be obtained " 4841 "from http://www.intellinuxwireless.org.\n", api_max, 4842 api_ver); 4843 4844 IL_INFO("loaded firmware version %u.%u.%u.%u\n", 4845 IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver), 4846 IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver)); 4847 4848 snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version), 4849 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver), 4850 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver), 4851 IL_UCODE_SERIAL(il->ucode_ver)); 4852 4853 /* 4854 * For any of the failures below (before allocating pci memory) 4855 * we will try to load a version with a smaller API -- maybe the 4856 * user just got a corrupted version of the latest API. 4857 */ 4858 4859 D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver); 4860 D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size); 4861 D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size); 4862 D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size); 4863 D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size); 4864 D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size); 4865 4866 /* Verify that uCode images will fit in card's SRAM */ 4867 if (pieces.inst_size > il->hw_params.max_inst_size) { 4868 IL_ERR("uCode instr len %zd too large to fit in\n", 4869 pieces.inst_size); 4870 goto try_again; 4871 } 4872 4873 if (pieces.data_size > il->hw_params.max_data_size) { 4874 IL_ERR("uCode data len %zd too large to fit in\n", 4875 pieces.data_size); 4876 goto try_again; 4877 } 4878 4879 if (pieces.init_size > il->hw_params.max_inst_size) { 4880 IL_ERR("uCode init instr len %zd too large to fit in\n", 4881 pieces.init_size); 4882 goto try_again; 4883 } 4884 4885 if (pieces.init_data_size > il->hw_params.max_data_size) { 4886 IL_ERR("uCode init data len %zd too large to fit in\n", 4887 pieces.init_data_size); 4888 goto try_again; 4889 } 4890 4891 if (pieces.boot_size > il->hw_params.max_bsm_size) { 4892 IL_ERR("uCode boot instr len %zd too large to fit in\n", 4893 pieces.boot_size); 4894 goto try_again; 4895 } 4896 4897 /* Allocate ucode buffers for card's bus-master loading ... */ 4898 4899 /* Runtime instructions and 2 copies of data: 4900 * 1) unmodified from disk 4901 * 2) backup cache for save/restore during power-downs */ 4902 il->ucode_code.len = pieces.inst_size; 4903 il_alloc_fw_desc(il->pci_dev, &il->ucode_code); 4904 4905 il->ucode_data.len = pieces.data_size; 4906 il_alloc_fw_desc(il->pci_dev, &il->ucode_data); 4907 4908 il->ucode_data_backup.len = pieces.data_size; 4909 il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup); 4910 4911 if (!il->ucode_code.v_addr || !il->ucode_data.v_addr || 4912 !il->ucode_data_backup.v_addr) 4913 goto err_pci_alloc; 4914 4915 /* Initialization instructions and data */ 4916 if (pieces.init_size && pieces.init_data_size) { 4917 il->ucode_init.len = pieces.init_size; 4918 il_alloc_fw_desc(il->pci_dev, &il->ucode_init); 4919 4920 il->ucode_init_data.len = pieces.init_data_size; 4921 il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data); 4922 4923 if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr) 4924 goto err_pci_alloc; 4925 } 4926 4927 /* Bootstrap (instructions only, no data) */ 4928 if (pieces.boot_size) { 4929 il->ucode_boot.len = pieces.boot_size; 4930 il_alloc_fw_desc(il->pci_dev, &il->ucode_boot); 4931 4932 if (!il->ucode_boot.v_addr) 4933 goto err_pci_alloc; 4934 } 4935 4936 /* Now that we can no longer fail, copy information */ 4937 4938 il->sta_key_max_num = STA_KEY_MAX_NUM; 4939 4940 /* Copy images into buffers for card's bus-master reads ... */ 4941 4942 /* Runtime instructions (first block of data in file) */ 4943 D_INFO("Copying (but not loading) uCode instr len %zd\n", 4944 pieces.inst_size); 4945 memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size); 4946 4947 D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", 4948 il->ucode_code.v_addr, (u32) il->ucode_code.p_addr); 4949 4950 /* 4951 * Runtime data 4952 * NOTE: Copy into backup buffer will be done in il_up() 4953 */ 4954 D_INFO("Copying (but not loading) uCode data len %zd\n", 4955 pieces.data_size); 4956 memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size); 4957 memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size); 4958 4959 /* Initialization instructions */ 4960 if (pieces.init_size) { 4961 D_INFO("Copying (but not loading) init instr len %zd\n", 4962 pieces.init_size); 4963 memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size); 4964 } 4965 4966 /* Initialization data */ 4967 if (pieces.init_data_size) { 4968 D_INFO("Copying (but not loading) init data len %zd\n", 4969 pieces.init_data_size); 4970 memcpy(il->ucode_init_data.v_addr, pieces.init_data, 4971 pieces.init_data_size); 4972 } 4973 4974 /* Bootstrap instructions */ 4975 D_INFO("Copying (but not loading) boot instr len %zd\n", 4976 pieces.boot_size); 4977 memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size); 4978 4979 /* 4980 * figure out the offset of chain noise reset and gain commands 4981 * base on the size of standard phy calibration commands table size 4982 */ 4983 il->_4965.phy_calib_chain_noise_reset_cmd = 4984 standard_phy_calibration_size; 4985 il->_4965.phy_calib_chain_noise_gain_cmd = 4986 standard_phy_calibration_size + 1; 4987 4988 /************************************************** 4989 * This is still part of probe() in a sense... 4990 * 4991 * 9. Setup and register with mac80211 and debugfs 4992 **************************************************/ 4993 err = il4965_mac_setup_register(il, max_probe_length); 4994 if (err) 4995 goto out_unbind; 4996 4997 err = il_dbgfs_register(il, DRV_NAME); 4998 if (err) 4999 IL_ERR("failed to create debugfs files. Ignoring error: %d\n", 5000 err); 5001 5002 err = sysfs_create_group(&il->pci_dev->dev.kobj, &il_attribute_group); 5003 if (err) { 5004 IL_ERR("failed to create sysfs device attributes\n"); 5005 goto out_unbind; 5006 } 5007 5008 /* We have our copies now, allow OS release its copies */ 5009 release_firmware(ucode_raw); 5010 complete(&il->_4965.firmware_loading_complete); 5011 return; 5012 5013 try_again: 5014 /* try next, if any */ 5015 if (il4965_request_firmware(il, false)) 5016 goto out_unbind; 5017 release_firmware(ucode_raw); 5018 return; 5019 5020 err_pci_alloc: 5021 IL_ERR("failed to allocate pci memory\n"); 5022 il4965_dealloc_ucode_pci(il); 5023 out_unbind: 5024 complete(&il->_4965.firmware_loading_complete); 5025 device_release_driver(&il->pci_dev->dev); 5026 release_firmware(ucode_raw); 5027 } 5028 5029 static const char *const desc_lookup_text[] = { 5030 "OK", 5031 "FAIL", 5032 "BAD_PARAM", 5033 "BAD_CHECKSUM", 5034 "NMI_INTERRUPT_WDG", 5035 "SYSASSERT", 5036 "FATAL_ERROR", 5037 "BAD_COMMAND", 5038 "HW_ERROR_TUNE_LOCK", 5039 "HW_ERROR_TEMPERATURE", 5040 "ILLEGAL_CHAN_FREQ", 5041 "VCC_NOT_STBL", 5042 "FH49_ERROR", 5043 "NMI_INTERRUPT_HOST", 5044 "NMI_INTERRUPT_ACTION_PT", 5045 "NMI_INTERRUPT_UNKNOWN", 5046 "UCODE_VERSION_MISMATCH", 5047 "HW_ERROR_ABS_LOCK", 5048 "HW_ERROR_CAL_LOCK_FAIL", 5049 "NMI_INTERRUPT_INST_ACTION_PT", 5050 "NMI_INTERRUPT_DATA_ACTION_PT", 5051 "NMI_TRM_HW_ER", 5052 "NMI_INTERRUPT_TRM", 5053 "NMI_INTERRUPT_BREAK_POINT", 5054 "DEBUG_0", 5055 "DEBUG_1", 5056 "DEBUG_2", 5057 "DEBUG_3", 5058 }; 5059 5060 static struct { 5061 char *name; 5062 u8 num; 5063 } advanced_lookup[] = { 5064 { 5065 "NMI_INTERRUPT_WDG", 0x34}, { 5066 "SYSASSERT", 0x35}, { 5067 "UCODE_VERSION_MISMATCH", 0x37}, { 5068 "BAD_COMMAND", 0x38}, { 5069 "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C}, { 5070 "FATAL_ERROR", 0x3D}, { 5071 "NMI_TRM_HW_ERR", 0x46}, { 5072 "NMI_INTERRUPT_TRM", 0x4C}, { 5073 "NMI_INTERRUPT_BREAK_POINT", 0x54}, { 5074 "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C}, { 5075 "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64}, { 5076 "NMI_INTERRUPT_HOST", 0x66}, { 5077 "NMI_INTERRUPT_ACTION_PT", 0x7C}, { 5078 "NMI_INTERRUPT_UNKNOWN", 0x84}, { 5079 "NMI_INTERRUPT_INST_ACTION_PT", 0x86}, { 5080 "ADVANCED_SYSASSERT", 0},}; 5081 5082 static const char * 5083 il4965_desc_lookup(u32 num) 5084 { 5085 int i; 5086 int max = ARRAY_SIZE(desc_lookup_text); 5087 5088 if (num < max) 5089 return desc_lookup_text[num]; 5090 5091 max = ARRAY_SIZE(advanced_lookup) - 1; 5092 for (i = 0; i < max; i++) { 5093 if (advanced_lookup[i].num == num) 5094 break; 5095 } 5096 return advanced_lookup[i].name; 5097 } 5098 5099 #define ERROR_START_OFFSET (1 * sizeof(u32)) 5100 #define ERROR_ELEM_SIZE (7 * sizeof(u32)) 5101 5102 void 5103 il4965_dump_nic_error_log(struct il_priv *il) 5104 { 5105 u32 data2, line; 5106 u32 desc, time, count, base, data1; 5107 u32 blink1, blink2, ilink1, ilink2; 5108 u32 pc, hcmd; 5109 5110 if (il->ucode_type == UCODE_INIT) 5111 base = le32_to_cpu(il->card_alive_init.error_event_table_ptr); 5112 else 5113 base = le32_to_cpu(il->card_alive.error_event_table_ptr); 5114 5115 if (!il->ops->is_valid_rtc_data_addr(base)) { 5116 IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n", 5117 base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT"); 5118 return; 5119 } 5120 5121 count = il_read_targ_mem(il, base); 5122 5123 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { 5124 IL_ERR("Start IWL Error Log Dump:\n"); 5125 IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count); 5126 } 5127 5128 desc = il_read_targ_mem(il, base + 1 * sizeof(u32)); 5129 il->isr_stats.err_code = desc; 5130 pc = il_read_targ_mem(il, base + 2 * sizeof(u32)); 5131 blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32)); 5132 blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32)); 5133 ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32)); 5134 ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32)); 5135 data1 = il_read_targ_mem(il, base + 7 * sizeof(u32)); 5136 data2 = il_read_targ_mem(il, base + 8 * sizeof(u32)); 5137 line = il_read_targ_mem(il, base + 9 * sizeof(u32)); 5138 time = il_read_targ_mem(il, base + 11 * sizeof(u32)); 5139 hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32)); 5140 5141 IL_ERR("Desc Time " 5142 "data1 data2 line\n"); 5143 IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n", 5144 il4965_desc_lookup(desc), desc, time, data1, data2, line); 5145 IL_ERR("pc blink1 blink2 ilink1 ilink2 hcmd\n"); 5146 IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1, 5147 blink2, ilink1, ilink2, hcmd); 5148 } 5149 5150 static void 5151 il4965_rf_kill_ct_config(struct il_priv *il) 5152 { 5153 struct il_ct_kill_config cmd; 5154 unsigned long flags; 5155 int ret = 0; 5156 5157 spin_lock_irqsave(&il->lock, flags); 5158 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, 5159 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); 5160 spin_unlock_irqrestore(&il->lock, flags); 5161 5162 cmd.critical_temperature_R = 5163 cpu_to_le32(il->hw_params.ct_kill_threshold); 5164 5165 ret = il_send_cmd_pdu(il, C_CT_KILL_CONFIG, sizeof(cmd), &cmd); 5166 if (ret) 5167 IL_ERR("C_CT_KILL_CONFIG failed\n"); 5168 else 5169 D_INFO("C_CT_KILL_CONFIG " "succeeded, " 5170 "critical temperature is %d\n", 5171 il->hw_params.ct_kill_threshold); 5172 } 5173 5174 static const s8 default_queue_to_tx_fifo[] = { 5175 IL_TX_FIFO_VO, 5176 IL_TX_FIFO_VI, 5177 IL_TX_FIFO_BE, 5178 IL_TX_FIFO_BK, 5179 IL49_CMD_FIFO_NUM, 5180 IL_TX_FIFO_UNUSED, 5181 IL_TX_FIFO_UNUSED, 5182 }; 5183 5184 #define IL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) 5185 5186 static int 5187 il4965_alive_notify(struct il_priv *il) 5188 { 5189 u32 a; 5190 unsigned long flags; 5191 int i, chan; 5192 u32 reg_val; 5193 5194 spin_lock_irqsave(&il->lock, flags); 5195 5196 /* Clear 4965's internal Tx Scheduler data base */ 5197 il->scd_base_addr = il_rd_prph(il, IL49_SCD_SRAM_BASE_ADDR); 5198 a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET; 5199 for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) 5200 il_write_targ_mem(il, a, 0); 5201 for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) 5202 il_write_targ_mem(il, a, 0); 5203 for (; 5204 a < 5205 il->scd_base_addr + 5206 IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num); 5207 a += 4) 5208 il_write_targ_mem(il, a, 0); 5209 5210 /* Tel 4965 where to find Tx byte count tables */ 5211 il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR, il->scd_bc_tbls.dma >> 10); 5212 5213 /* Enable DMA channel */ 5214 for (chan = 0; chan < FH49_TCSR_CHNL_NUM; chan++) 5215 il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(chan), 5216 FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | 5217 FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); 5218 5219 /* Update FH chicken bits */ 5220 reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG); 5221 il_wr(il, FH49_TX_CHICKEN_BITS_REG, 5222 reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); 5223 5224 /* Disable chain mode for all queues */ 5225 il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0); 5226 5227 /* Initialize each Tx queue (including the command queue) */ 5228 for (i = 0; i < il->hw_params.max_txq_num; i++) { 5229 5230 /* TFD circular buffer read/write idxes */ 5231 il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0); 5232 il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8)); 5233 5234 /* Max Tx Window size for Scheduler-ACK mode */ 5235 il_write_targ_mem(il, 5236 il->scd_base_addr + 5237 IL49_SCD_CONTEXT_QUEUE_OFFSET(i), 5238 (SCD_WIN_SIZE << 5239 IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & 5240 IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); 5241 5242 /* Frame limit */ 5243 il_write_targ_mem(il, 5244 il->scd_base_addr + 5245 IL49_SCD_CONTEXT_QUEUE_OFFSET(i) + 5246 sizeof(u32), 5247 (SCD_FRAME_LIMIT << 5248 IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & 5249 IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); 5250 5251 } 5252 il_wr_prph(il, IL49_SCD_INTERRUPT_MASK, 5253 (1 << il->hw_params.max_txq_num) - 1); 5254 5255 /* Activate all Tx DMA/FIFO channels */ 5256 il4965_txq_set_sched(il, IL_MASK(0, 6)); 5257 5258 il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0); 5259 5260 /* make sure all queue are not stopped */ 5261 memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped)); 5262 for (i = 0; i < 4; i++) 5263 atomic_set(&il->queue_stop_count[i], 0); 5264 5265 /* reset to 0 to enable all the queue first */ 5266 il->txq_ctx_active_msk = 0; 5267 /* Map each Tx/cmd queue to its corresponding fifo */ 5268 BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7); 5269 5270 for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { 5271 int ac = default_queue_to_tx_fifo[i]; 5272 5273 il_txq_ctx_activate(il, i); 5274 5275 if (ac == IL_TX_FIFO_UNUSED) 5276 continue; 5277 5278 il4965_tx_queue_set_status(il, &il->txq[i], ac, 0); 5279 } 5280 5281 spin_unlock_irqrestore(&il->lock, flags); 5282 5283 return 0; 5284 } 5285 5286 /** 5287 * il4965_alive_start - called after N_ALIVE notification received 5288 * from protocol/runtime uCode (initialization uCode's 5289 * Alive gets handled by il_init_alive_start()). 5290 */ 5291 static void 5292 il4965_alive_start(struct il_priv *il) 5293 { 5294 int ret = 0; 5295 5296 D_INFO("Runtime Alive received.\n"); 5297 5298 if (il->card_alive.is_valid != UCODE_VALID_OK) { 5299 /* We had an error bringing up the hardware, so take it 5300 * all the way back down so we can try again */ 5301 D_INFO("Alive failed.\n"); 5302 goto restart; 5303 } 5304 5305 /* Initialize uCode has loaded Runtime uCode ... verify inst image. 5306 * This is a paranoid check, because we would not have gotten the 5307 * "runtime" alive if code weren't properly loaded. */ 5308 if (il4965_verify_ucode(il)) { 5309 /* Runtime instruction load was bad; 5310 * take it all the way back down so we can try again */ 5311 D_INFO("Bad runtime uCode load.\n"); 5312 goto restart; 5313 } 5314 5315 ret = il4965_alive_notify(il); 5316 if (ret) { 5317 IL_WARN("Could not complete ALIVE transition [ntf]: %d\n", ret); 5318 goto restart; 5319 } 5320 5321 /* After the ALIVE response, we can send host commands to the uCode */ 5322 set_bit(S_ALIVE, &il->status); 5323 5324 /* Enable watchdog to monitor the driver tx queues */ 5325 il_setup_watchdog(il); 5326 5327 if (il_is_rfkill(il)) 5328 return; 5329 5330 ieee80211_wake_queues(il->hw); 5331 5332 il->active_rate = RATES_MASK; 5333 5334 il_power_update_mode(il, true); 5335 D_INFO("Updated power mode\n"); 5336 5337 if (il_is_associated(il)) { 5338 struct il_rxon_cmd *active_rxon = 5339 (struct il_rxon_cmd *)&il->active; 5340 /* apply any changes in staging */ 5341 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; 5342 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; 5343 } else { 5344 /* Initialize our rx_config data */ 5345 il_connection_init_rx_config(il); 5346 5347 if (il->ops->set_rxon_chain) 5348 il->ops->set_rxon_chain(il); 5349 } 5350 5351 /* Configure bluetooth coexistence if enabled */ 5352 il_send_bt_config(il); 5353 5354 il4965_reset_run_time_calib(il); 5355 5356 set_bit(S_READY, &il->status); 5357 5358 /* Configure the adapter for unassociated operation */ 5359 il_commit_rxon(il); 5360 5361 /* At this point, the NIC is initialized and operational */ 5362 il4965_rf_kill_ct_config(il); 5363 5364 D_INFO("ALIVE processing complete.\n"); 5365 wake_up(&il->wait_command_queue); 5366 5367 return; 5368 5369 restart: 5370 queue_work(il->workqueue, &il->restart); 5371 } 5372 5373 static void il4965_cancel_deferred_work(struct il_priv *il); 5374 5375 static void 5376 __il4965_down(struct il_priv *il) 5377 { 5378 unsigned long flags; 5379 int exit_pending; 5380 5381 D_INFO(DRV_NAME " is going down\n"); 5382 5383 il_scan_cancel_timeout(il, 200); 5384 5385 exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status); 5386 5387 /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set 5388 * to prevent rearm timer */ 5389 del_timer_sync(&il->watchdog); 5390 5391 il_clear_ucode_stations(il); 5392 5393 /* FIXME: race conditions ? */ 5394 spin_lock_irq(&il->sta_lock); 5395 /* 5396 * Remove all key information that is not stored as part 5397 * of station information since mac80211 may not have had 5398 * a chance to remove all the keys. When device is 5399 * reconfigured by mac80211 after an error all keys will 5400 * be reconfigured. 5401 */ 5402 memset(il->_4965.wep_keys, 0, sizeof(il->_4965.wep_keys)); 5403 il->_4965.key_mapping_keys = 0; 5404 spin_unlock_irq(&il->sta_lock); 5405 5406 il_dealloc_bcast_stations(il); 5407 il_clear_driver_stations(il); 5408 5409 /* Unblock any waiting calls */ 5410 wake_up_all(&il->wait_command_queue); 5411 5412 /* Wipe out the EXIT_PENDING status bit if we are not actually 5413 * exiting the module */ 5414 if (!exit_pending) 5415 clear_bit(S_EXIT_PENDING, &il->status); 5416 5417 /* stop and reset the on-board processor */ 5418 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); 5419 5420 /* tell the device to stop sending interrupts */ 5421 spin_lock_irqsave(&il->lock, flags); 5422 il_disable_interrupts(il); 5423 spin_unlock_irqrestore(&il->lock, flags); 5424 il4965_synchronize_irq(il); 5425 5426 if (il->mac80211_registered) 5427 ieee80211_stop_queues(il->hw); 5428 5429 /* If we have not previously called il_init() then 5430 * clear all bits but the RF Kill bit and return */ 5431 if (!il_is_init(il)) { 5432 il->status = 5433 test_bit(S_RFKILL, &il->status) << S_RFKILL | 5434 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | 5435 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; 5436 goto exit; 5437 } 5438 5439 /* ...otherwise clear out all the status bits but the RF Kill 5440 * bit and continue taking the NIC down. */ 5441 il->status &= 5442 test_bit(S_RFKILL, &il->status) << S_RFKILL | 5443 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | 5444 test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR | 5445 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; 5446 5447 /* 5448 * We disabled and synchronized interrupt, and priv->mutex is taken, so 5449 * here is the only thread which will program device registers, but 5450 * still have lockdep assertions, so we are taking reg_lock. 5451 */ 5452 spin_lock_irq(&il->reg_lock); 5453 /* FIXME: il_grab_nic_access if rfkill is off ? */ 5454 5455 il4965_txq_ctx_stop(il); 5456 il4965_rxq_stop(il); 5457 /* Power-down device's busmaster DMA clocks */ 5458 _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); 5459 udelay(5); 5460 /* Make sure (redundant) we've released our request to stay awake */ 5461 _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); 5462 /* Stop the device, and put it in low power state */ 5463 _il_apm_stop(il); 5464 5465 spin_unlock_irq(&il->reg_lock); 5466 5467 il4965_txq_ctx_unmap(il); 5468 exit: 5469 memset(&il->card_alive, 0, sizeof(struct il_alive_resp)); 5470 5471 dev_kfree_skb(il->beacon_skb); 5472 il->beacon_skb = NULL; 5473 5474 /* clear out any free frames */ 5475 il4965_clear_free_frames(il); 5476 } 5477 5478 static void 5479 il4965_down(struct il_priv *il) 5480 { 5481 mutex_lock(&il->mutex); 5482 __il4965_down(il); 5483 mutex_unlock(&il->mutex); 5484 5485 il4965_cancel_deferred_work(il); 5486 } 5487 5488 5489 static void 5490 il4965_set_hw_ready(struct il_priv *il) 5491 { 5492 int ret; 5493 5494 il_set_bit(il, CSR_HW_IF_CONFIG_REG, 5495 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY); 5496 5497 /* See if we got it */ 5498 ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, 5499 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, 5500 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, 5501 100); 5502 if (ret >= 0) 5503 il->hw_ready = true; 5504 5505 D_INFO("hardware %s ready\n", (il->hw_ready) ? "" : "not"); 5506 } 5507 5508 static void 5509 il4965_prepare_card_hw(struct il_priv *il) 5510 { 5511 int ret; 5512 5513 il->hw_ready = false; 5514 5515 il4965_set_hw_ready(il); 5516 if (il->hw_ready) 5517 return; 5518 5519 /* If HW is not ready, prepare the conditions to check again */ 5520 il_set_bit(il, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE); 5521 5522 ret = 5523 _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, 5524 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 5525 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000); 5526 5527 /* HW should be ready by now, check again. */ 5528 if (ret != -ETIMEDOUT) 5529 il4965_set_hw_ready(il); 5530 } 5531 5532 #define MAX_HW_RESTARTS 5 5533 5534 static int 5535 __il4965_up(struct il_priv *il) 5536 { 5537 int i; 5538 int ret; 5539 5540 if (test_bit(S_EXIT_PENDING, &il->status)) { 5541 IL_WARN("Exit pending; will not bring the NIC up\n"); 5542 return -EIO; 5543 } 5544 5545 if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) { 5546 IL_ERR("ucode not available for device bringup\n"); 5547 return -EIO; 5548 } 5549 5550 ret = il4965_alloc_bcast_station(il); 5551 if (ret) { 5552 il_dealloc_bcast_stations(il); 5553 return ret; 5554 } 5555 5556 il4965_prepare_card_hw(il); 5557 if (!il->hw_ready) { 5558 il_dealloc_bcast_stations(il); 5559 IL_ERR("HW not ready\n"); 5560 return -EIO; 5561 } 5562 5563 /* If platform's RF_KILL switch is NOT set to KILL */ 5564 if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) 5565 clear_bit(S_RFKILL, &il->status); 5566 else { 5567 set_bit(S_RFKILL, &il->status); 5568 wiphy_rfkill_set_hw_state(il->hw->wiphy, true); 5569 5570 il_dealloc_bcast_stations(il); 5571 il_enable_rfkill_int(il); 5572 IL_WARN("Radio disabled by HW RF Kill switch\n"); 5573 return 0; 5574 } 5575 5576 _il_wr(il, CSR_INT, 0xFFFFFFFF); 5577 5578 /* must be initialised before il_hw_nic_init */ 5579 il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM; 5580 5581 ret = il4965_hw_nic_init(il); 5582 if (ret) { 5583 IL_ERR("Unable to init nic\n"); 5584 il_dealloc_bcast_stations(il); 5585 return ret; 5586 } 5587 5588 /* make sure rfkill handshake bits are cleared */ 5589 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 5590 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 5591 5592 /* clear (again), then enable host interrupts */ 5593 _il_wr(il, CSR_INT, 0xFFFFFFFF); 5594 il_enable_interrupts(il); 5595 5596 /* really make sure rfkill handshake bits are cleared */ 5597 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 5598 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 5599 5600 /* Copy original ucode data image from disk into backup cache. 5601 * This will be used to initialize the on-board processor's 5602 * data SRAM for a clean start when the runtime program first loads. */ 5603 memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr, 5604 il->ucode_data.len); 5605 5606 for (i = 0; i < MAX_HW_RESTARTS; i++) { 5607 5608 /* load bootstrap state machine, 5609 * load bootstrap program into processor's memory, 5610 * prepare to load the "initialize" uCode */ 5611 ret = il->ops->load_ucode(il); 5612 5613 if (ret) { 5614 IL_ERR("Unable to set up bootstrap uCode: %d\n", ret); 5615 continue; 5616 } 5617 5618 /* start card; "initialize" will load runtime ucode */ 5619 il4965_nic_start(il); 5620 5621 D_INFO(DRV_NAME " is coming up\n"); 5622 5623 return 0; 5624 } 5625 5626 set_bit(S_EXIT_PENDING, &il->status); 5627 __il4965_down(il); 5628 clear_bit(S_EXIT_PENDING, &il->status); 5629 5630 /* tried to restart and config the device for as long as our 5631 * patience could withstand */ 5632 IL_ERR("Unable to initialize device after %d attempts.\n", i); 5633 return -EIO; 5634 } 5635 5636 /***************************************************************************** 5637 * 5638 * Workqueue callbacks 5639 * 5640 *****************************************************************************/ 5641 5642 static void 5643 il4965_bg_init_alive_start(struct work_struct *data) 5644 { 5645 struct il_priv *il = 5646 container_of(data, struct il_priv, init_alive_start.work); 5647 5648 mutex_lock(&il->mutex); 5649 if (test_bit(S_EXIT_PENDING, &il->status)) 5650 goto out; 5651 5652 il->ops->init_alive_start(il); 5653 out: 5654 mutex_unlock(&il->mutex); 5655 } 5656 5657 static void 5658 il4965_bg_alive_start(struct work_struct *data) 5659 { 5660 struct il_priv *il = 5661 container_of(data, struct il_priv, alive_start.work); 5662 5663 mutex_lock(&il->mutex); 5664 if (test_bit(S_EXIT_PENDING, &il->status)) 5665 goto out; 5666 5667 il4965_alive_start(il); 5668 out: 5669 mutex_unlock(&il->mutex); 5670 } 5671 5672 static void 5673 il4965_bg_run_time_calib_work(struct work_struct *work) 5674 { 5675 struct il_priv *il = container_of(work, struct il_priv, 5676 run_time_calib_work); 5677 5678 mutex_lock(&il->mutex); 5679 5680 if (test_bit(S_EXIT_PENDING, &il->status) || 5681 test_bit(S_SCANNING, &il->status)) { 5682 mutex_unlock(&il->mutex); 5683 return; 5684 } 5685 5686 if (il->start_calib) { 5687 il4965_chain_noise_calibration(il, (void *)&il->_4965.stats); 5688 il4965_sensitivity_calibration(il, (void *)&il->_4965.stats); 5689 } 5690 5691 mutex_unlock(&il->mutex); 5692 } 5693 5694 static void 5695 il4965_bg_restart(struct work_struct *data) 5696 { 5697 struct il_priv *il = container_of(data, struct il_priv, restart); 5698 5699 if (test_bit(S_EXIT_PENDING, &il->status)) 5700 return; 5701 5702 if (test_and_clear_bit(S_FW_ERROR, &il->status)) { 5703 mutex_lock(&il->mutex); 5704 il->is_open = 0; 5705 5706 __il4965_down(il); 5707 5708 mutex_unlock(&il->mutex); 5709 il4965_cancel_deferred_work(il); 5710 ieee80211_restart_hw(il->hw); 5711 } else { 5712 il4965_down(il); 5713 5714 mutex_lock(&il->mutex); 5715 if (test_bit(S_EXIT_PENDING, &il->status)) { 5716 mutex_unlock(&il->mutex); 5717 return; 5718 } 5719 5720 __il4965_up(il); 5721 mutex_unlock(&il->mutex); 5722 } 5723 } 5724 5725 static void 5726 il4965_bg_rx_replenish(struct work_struct *data) 5727 { 5728 struct il_priv *il = container_of(data, struct il_priv, rx_replenish); 5729 5730 if (test_bit(S_EXIT_PENDING, &il->status)) 5731 return; 5732 5733 mutex_lock(&il->mutex); 5734 il4965_rx_replenish(il); 5735 mutex_unlock(&il->mutex); 5736 } 5737 5738 /***************************************************************************** 5739 * 5740 * mac80211 entry point functions 5741 * 5742 *****************************************************************************/ 5743 5744 #define UCODE_READY_TIMEOUT (4 * HZ) 5745 5746 /* 5747 * Not a mac80211 entry point function, but it fits in with all the 5748 * other mac80211 functions grouped here. 5749 */ 5750 static int 5751 il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) 5752 { 5753 int ret; 5754 struct ieee80211_hw *hw = il->hw; 5755 5756 hw->rate_control_algorithm = "iwl-4965-rs"; 5757 5758 /* Tell mac80211 our characteristics */ 5759 ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS); 5760 ieee80211_hw_set(hw, SUPPORTS_PS); 5761 ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); 5762 ieee80211_hw_set(hw, SPECTRUM_MGMT); 5763 ieee80211_hw_set(hw, NEED_DTIM_BEFORE_ASSOC); 5764 ieee80211_hw_set(hw, SIGNAL_DBM); 5765 ieee80211_hw_set(hw, AMPDU_AGGREGATION); 5766 if (il->cfg->sku & IL_SKU_N) 5767 hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS | 5768 NL80211_FEATURE_STATIC_SMPS; 5769 5770 hw->sta_data_size = sizeof(struct il_station_priv); 5771 hw->vif_data_size = sizeof(struct il_vif_priv); 5772 5773 hw->wiphy->interface_modes = 5774 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); 5775 5776 hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; 5777 hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | 5778 REGULATORY_DISABLE_BEACON_HINTS; 5779 5780 /* 5781 * For now, disable PS by default because it affects 5782 * RX performance significantly. 5783 */ 5784 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; 5785 5786 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; 5787 /* we create the 802.11 header and a zero-length SSID element */ 5788 hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2; 5789 5790 /* Default value; 4 EDCA QOS priorities */ 5791 hw->queues = 4; 5792 5793 hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL; 5794 5795 if (il->bands[NL80211_BAND_2GHZ].n_channels) 5796 il->hw->wiphy->bands[NL80211_BAND_2GHZ] = 5797 &il->bands[NL80211_BAND_2GHZ]; 5798 if (il->bands[NL80211_BAND_5GHZ].n_channels) 5799 il->hw->wiphy->bands[NL80211_BAND_5GHZ] = 5800 &il->bands[NL80211_BAND_5GHZ]; 5801 5802 il_leds_init(il); 5803 5804 wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); 5805 5806 ret = ieee80211_register_hw(il->hw); 5807 if (ret) { 5808 IL_ERR("Failed to register hw (error %d)\n", ret); 5809 return ret; 5810 } 5811 il->mac80211_registered = 1; 5812 5813 return 0; 5814 } 5815 5816 int 5817 il4965_mac_start(struct ieee80211_hw *hw) 5818 { 5819 struct il_priv *il = hw->priv; 5820 int ret; 5821 5822 D_MAC80211("enter\n"); 5823 5824 /* we should be verifying the device is ready to be opened */ 5825 mutex_lock(&il->mutex); 5826 ret = __il4965_up(il); 5827 mutex_unlock(&il->mutex); 5828 5829 if (ret) 5830 return ret; 5831 5832 if (il_is_rfkill(il)) 5833 goto out; 5834 5835 D_INFO("Start UP work done.\n"); 5836 5837 /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from 5838 * mac80211 will not be run successfully. */ 5839 ret = wait_event_timeout(il->wait_command_queue, 5840 test_bit(S_READY, &il->status), 5841 UCODE_READY_TIMEOUT); 5842 if (!ret) { 5843 if (!test_bit(S_READY, &il->status)) { 5844 IL_ERR("START_ALIVE timeout after %dms.\n", 5845 jiffies_to_msecs(UCODE_READY_TIMEOUT)); 5846 return -ETIMEDOUT; 5847 } 5848 } 5849 5850 il4965_led_enable(il); 5851 5852 out: 5853 il->is_open = 1; 5854 D_MAC80211("leave\n"); 5855 return 0; 5856 } 5857 5858 void 5859 il4965_mac_stop(struct ieee80211_hw *hw) 5860 { 5861 struct il_priv *il = hw->priv; 5862 5863 D_MAC80211("enter\n"); 5864 5865 if (!il->is_open) 5866 return; 5867 5868 il->is_open = 0; 5869 5870 il4965_down(il); 5871 5872 flush_workqueue(il->workqueue); 5873 5874 /* User space software may expect getting rfkill changes 5875 * even if interface is down */ 5876 _il_wr(il, CSR_INT, 0xFFFFFFFF); 5877 il_enable_rfkill_int(il); 5878 5879 D_MAC80211("leave\n"); 5880 } 5881 5882 void 5883 il4965_mac_tx(struct ieee80211_hw *hw, 5884 struct ieee80211_tx_control *control, 5885 struct sk_buff *skb) 5886 { 5887 struct il_priv *il = hw->priv; 5888 5889 D_MACDUMP("enter\n"); 5890 5891 D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, 5892 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); 5893 5894 if (il4965_tx_skb(il, control->sta, skb)) 5895 dev_kfree_skb_any(skb); 5896 5897 D_MACDUMP("leave\n"); 5898 } 5899 5900 void 5901 il4965_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 5902 struct ieee80211_key_conf *keyconf, 5903 struct ieee80211_sta *sta, u32 iv32, u16 * phase1key) 5904 { 5905 struct il_priv *il = hw->priv; 5906 5907 D_MAC80211("enter\n"); 5908 5909 il4965_update_tkip_key(il, keyconf, sta, iv32, phase1key); 5910 5911 D_MAC80211("leave\n"); 5912 } 5913 5914 int 5915 il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, 5916 struct ieee80211_vif *vif, struct ieee80211_sta *sta, 5917 struct ieee80211_key_conf *key) 5918 { 5919 struct il_priv *il = hw->priv; 5920 int ret; 5921 u8 sta_id; 5922 bool is_default_wep_key = false; 5923 5924 D_MAC80211("enter\n"); 5925 5926 if (il->cfg->mod_params->sw_crypto) { 5927 D_MAC80211("leave - hwcrypto disabled\n"); 5928 return -EOPNOTSUPP; 5929 } 5930 5931 /* 5932 * To support IBSS RSN, don't program group keys in IBSS, the 5933 * hardware will then not attempt to decrypt the frames. 5934 */ 5935 if (vif->type == NL80211_IFTYPE_ADHOC && 5936 !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { 5937 D_MAC80211("leave - ad-hoc group key\n"); 5938 return -EOPNOTSUPP; 5939 } 5940 5941 sta_id = il_sta_id_or_broadcast(il, sta); 5942 if (sta_id == IL_INVALID_STATION) 5943 return -EINVAL; 5944 5945 mutex_lock(&il->mutex); 5946 il_scan_cancel_timeout(il, 100); 5947 5948 /* 5949 * If we are getting WEP group key and we didn't receive any key mapping 5950 * so far, we are in legacy wep mode (group key only), otherwise we are 5951 * in 1X mode. 5952 * In legacy wep mode, we use another host command to the uCode. 5953 */ 5954 if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || 5955 key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) { 5956 if (cmd == SET_KEY) 5957 is_default_wep_key = !il->_4965.key_mapping_keys; 5958 else 5959 is_default_wep_key = 5960 (key->hw_key_idx == HW_KEY_DEFAULT); 5961 } 5962 5963 switch (cmd) { 5964 case SET_KEY: 5965 if (is_default_wep_key) 5966 ret = il4965_set_default_wep_key(il, key); 5967 else 5968 ret = il4965_set_dynamic_key(il, key, sta_id); 5969 5970 D_MAC80211("enable hwcrypto key\n"); 5971 break; 5972 case DISABLE_KEY: 5973 if (is_default_wep_key) 5974 ret = il4965_remove_default_wep_key(il, key); 5975 else 5976 ret = il4965_remove_dynamic_key(il, key, sta_id); 5977 5978 D_MAC80211("disable hwcrypto key\n"); 5979 break; 5980 default: 5981 ret = -EINVAL; 5982 } 5983 5984 mutex_unlock(&il->mutex); 5985 D_MAC80211("leave\n"); 5986 5987 return ret; 5988 } 5989 5990 int 5991 il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 5992 struct ieee80211_ampdu_params *params) 5993 { 5994 struct il_priv *il = hw->priv; 5995 int ret = -EINVAL; 5996 struct ieee80211_sta *sta = params->sta; 5997 enum ieee80211_ampdu_mlme_action action = params->action; 5998 u16 tid = params->tid; 5999 u16 *ssn = ¶ms->ssn; 6000 6001 D_HT("A-MPDU action on addr %pM tid %d\n", sta->addr, tid); 6002 6003 if (!(il->cfg->sku & IL_SKU_N)) 6004 return -EACCES; 6005 6006 mutex_lock(&il->mutex); 6007 6008 switch (action) { 6009 case IEEE80211_AMPDU_RX_START: 6010 D_HT("start Rx\n"); 6011 ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn); 6012 break; 6013 case IEEE80211_AMPDU_RX_STOP: 6014 D_HT("stop Rx\n"); 6015 ret = il4965_sta_rx_agg_stop(il, sta, tid); 6016 if (test_bit(S_EXIT_PENDING, &il->status)) 6017 ret = 0; 6018 break; 6019 case IEEE80211_AMPDU_TX_START: 6020 D_HT("start Tx\n"); 6021 ret = il4965_tx_agg_start(il, vif, sta, tid, ssn); 6022 break; 6023 case IEEE80211_AMPDU_TX_STOP_CONT: 6024 case IEEE80211_AMPDU_TX_STOP_FLUSH: 6025 case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: 6026 D_HT("stop Tx\n"); 6027 ret = il4965_tx_agg_stop(il, vif, sta, tid); 6028 if (test_bit(S_EXIT_PENDING, &il->status)) 6029 ret = 0; 6030 break; 6031 case IEEE80211_AMPDU_TX_OPERATIONAL: 6032 ret = 0; 6033 break; 6034 } 6035 mutex_unlock(&il->mutex); 6036 6037 return ret; 6038 } 6039 6040 int 6041 il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 6042 struct ieee80211_sta *sta) 6043 { 6044 struct il_priv *il = hw->priv; 6045 struct il_station_priv *sta_priv = (void *)sta->drv_priv; 6046 bool is_ap = vif->type == NL80211_IFTYPE_STATION; 6047 int ret; 6048 u8 sta_id; 6049 6050 D_INFO("received request to add station %pM\n", sta->addr); 6051 mutex_lock(&il->mutex); 6052 D_INFO("proceeding to add station %pM\n", sta->addr); 6053 sta_priv->common.sta_id = IL_INVALID_STATION; 6054 6055 atomic_set(&sta_priv->pending_frames, 0); 6056 6057 ret = 6058 il_add_station_common(il, sta->addr, is_ap, sta, &sta_id); 6059 if (ret) { 6060 IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret); 6061 /* Should we return success if return code is EEXIST ? */ 6062 mutex_unlock(&il->mutex); 6063 return ret; 6064 } 6065 6066 sta_priv->common.sta_id = sta_id; 6067 6068 /* Initialize rate scaling */ 6069 D_INFO("Initializing rate scaling for station %pM\n", sta->addr); 6070 il4965_rs_rate_init(il, sta, sta_id); 6071 mutex_unlock(&il->mutex); 6072 6073 return 0; 6074 } 6075 6076 void 6077 il4965_mac_channel_switch(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 6078 struct ieee80211_channel_switch *ch_switch) 6079 { 6080 struct il_priv *il = hw->priv; 6081 const struct il_channel_info *ch_info; 6082 struct ieee80211_conf *conf = &hw->conf; 6083 struct ieee80211_channel *channel = ch_switch->chandef.chan; 6084 struct il_ht_config *ht_conf = &il->current_ht_config; 6085 u16 ch; 6086 6087 D_MAC80211("enter\n"); 6088 6089 mutex_lock(&il->mutex); 6090 6091 if (il_is_rfkill(il)) 6092 goto out; 6093 6094 if (test_bit(S_EXIT_PENDING, &il->status) || 6095 test_bit(S_SCANNING, &il->status) || 6096 test_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) 6097 goto out; 6098 6099 if (!il_is_associated(il)) 6100 goto out; 6101 6102 if (!il->ops->set_channel_switch) 6103 goto out; 6104 6105 ch = channel->hw_value; 6106 if (le16_to_cpu(il->active.channel) == ch) 6107 goto out; 6108 6109 ch_info = il_get_channel_info(il, channel->band, ch); 6110 if (!il_is_channel_valid(ch_info)) { 6111 D_MAC80211("invalid channel\n"); 6112 goto out; 6113 } 6114 6115 spin_lock_irq(&il->lock); 6116 6117 il->current_ht_config.smps = conf->smps_mode; 6118 6119 /* Configure HT40 channels */ 6120 switch (cfg80211_get_chandef_type(&ch_switch->chandef)) { 6121 case NL80211_CHAN_NO_HT: 6122 case NL80211_CHAN_HT20: 6123 il->ht.is_40mhz = false; 6124 il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; 6125 break; 6126 case NL80211_CHAN_HT40MINUS: 6127 il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; 6128 il->ht.is_40mhz = true; 6129 break; 6130 case NL80211_CHAN_HT40PLUS: 6131 il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; 6132 il->ht.is_40mhz = true; 6133 break; 6134 } 6135 6136 if ((le16_to_cpu(il->staging.channel) != ch)) 6137 il->staging.flags = 0; 6138 6139 il_set_rxon_channel(il, channel); 6140 il_set_rxon_ht(il, ht_conf); 6141 il_set_flags_for_band(il, channel->band, il->vif); 6142 6143 spin_unlock_irq(&il->lock); 6144 6145 il_set_rate(il); 6146 /* 6147 * at this point, staging_rxon has the 6148 * configuration for channel switch 6149 */ 6150 set_bit(S_CHANNEL_SWITCH_PENDING, &il->status); 6151 il->switch_channel = cpu_to_le16(ch); 6152 if (il->ops->set_channel_switch(il, ch_switch)) { 6153 clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status); 6154 il->switch_channel = 0; 6155 ieee80211_chswitch_done(il->vif, false); 6156 } 6157 6158 out: 6159 mutex_unlock(&il->mutex); 6160 D_MAC80211("leave\n"); 6161 } 6162 6163 void 6164 il4965_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, 6165 unsigned int *total_flags, u64 multicast) 6166 { 6167 struct il_priv *il = hw->priv; 6168 __le32 filter_or = 0, filter_nand = 0; 6169 6170 #define CHK(test, flag) do { \ 6171 if (*total_flags & (test)) \ 6172 filter_or |= (flag); \ 6173 else \ 6174 filter_nand |= (flag); \ 6175 } while (0) 6176 6177 D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags, 6178 *total_flags); 6179 6180 CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK); 6181 /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ 6182 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); 6183 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); 6184 6185 #undef CHK 6186 6187 mutex_lock(&il->mutex); 6188 6189 il->staging.filter_flags &= ~filter_nand; 6190 il->staging.filter_flags |= filter_or; 6191 6192 /* 6193 * Not committing directly because hardware can perform a scan, 6194 * but we'll eventually commit the filter flags change anyway. 6195 */ 6196 6197 mutex_unlock(&il->mutex); 6198 6199 /* 6200 * Receiving all multicast frames is always enabled by the 6201 * default flags setup in il_connection_init_rx_config() 6202 * since we currently do not support programming multicast 6203 * filters into the device. 6204 */ 6205 *total_flags &= 6206 FIF_OTHER_BSS | FIF_ALLMULTI | 6207 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; 6208 } 6209 6210 /***************************************************************************** 6211 * 6212 * driver setup and teardown 6213 * 6214 *****************************************************************************/ 6215 6216 static void 6217 il4965_bg_txpower_work(struct work_struct *work) 6218 { 6219 struct il_priv *il = container_of(work, struct il_priv, 6220 txpower_work); 6221 6222 mutex_lock(&il->mutex); 6223 6224 /* If a scan happened to start before we got here 6225 * then just return; the stats notification will 6226 * kick off another scheduled work to compensate for 6227 * any temperature delta we missed here. */ 6228 if (test_bit(S_EXIT_PENDING, &il->status) || 6229 test_bit(S_SCANNING, &il->status)) 6230 goto out; 6231 6232 /* Regardless of if we are associated, we must reconfigure the 6233 * TX power since frames can be sent on non-radar channels while 6234 * not associated */ 6235 il->ops->send_tx_power(il); 6236 6237 /* Update last_temperature to keep is_calib_needed from running 6238 * when it isn't needed... */ 6239 il->last_temperature = il->temperature; 6240 out: 6241 mutex_unlock(&il->mutex); 6242 } 6243 6244 static void 6245 il4965_setup_deferred_work(struct il_priv *il) 6246 { 6247 il->workqueue = create_singlethread_workqueue(DRV_NAME); 6248 6249 init_waitqueue_head(&il->wait_command_queue); 6250 6251 INIT_WORK(&il->restart, il4965_bg_restart); 6252 INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish); 6253 INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work); 6254 INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start); 6255 INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start); 6256 6257 il_setup_scan_deferred_work(il); 6258 6259 INIT_WORK(&il->txpower_work, il4965_bg_txpower_work); 6260 6261 timer_setup(&il->stats_periodic, il4965_bg_stats_periodic, 0); 6262 6263 timer_setup(&il->watchdog, il_bg_watchdog, 0); 6264 6265 tasklet_init(&il->irq_tasklet, 6266 (void (*)(unsigned long))il4965_irq_tasklet, 6267 (unsigned long)il); 6268 } 6269 6270 static void 6271 il4965_cancel_deferred_work(struct il_priv *il) 6272 { 6273 cancel_work_sync(&il->txpower_work); 6274 cancel_delayed_work_sync(&il->init_alive_start); 6275 cancel_delayed_work(&il->alive_start); 6276 cancel_work_sync(&il->run_time_calib_work); 6277 6278 il_cancel_scan_deferred_work(il); 6279 6280 del_timer_sync(&il->stats_periodic); 6281 } 6282 6283 static void 6284 il4965_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates) 6285 { 6286 int i; 6287 6288 for (i = 0; i < RATE_COUNT_LEGACY; i++) { 6289 rates[i].bitrate = il_rates[i].ieee * 5; 6290 rates[i].hw_value = i; /* Rate scaling will work on idxes */ 6291 rates[i].hw_value_short = i; 6292 rates[i].flags = 0; 6293 if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) { 6294 /* 6295 * If CCK != 1M then set short preamble rate flag. 6296 */ 6297 rates[i].flags |= 6298 (il_rates[i].plcp == 6299 RATE_1M_PLCP) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE; 6300 } 6301 } 6302 } 6303 6304 /* 6305 * Acquire il->lock before calling this function ! 6306 */ 6307 void 6308 il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx) 6309 { 6310 il_wr(il, HBUS_TARG_WRPTR, (idx & 0xff) | (txq_id << 8)); 6311 il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx); 6312 } 6313 6314 void 6315 il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq, 6316 int tx_fifo_id, int scd_retry) 6317 { 6318 int txq_id = txq->q.id; 6319 6320 /* Find out whether to activate Tx queue */ 6321 int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0; 6322 6323 /* Set up and activate */ 6324 il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), 6325 (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | 6326 (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) | 6327 (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) | 6328 (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | 6329 IL49_SCD_QUEUE_STTS_REG_MSK); 6330 6331 txq->sched_retry = scd_retry; 6332 6333 D_INFO("%s %s Queue %d on AC %d\n", active ? "Activate" : "Deactivate", 6334 scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); 6335 } 6336 6337 static const struct ieee80211_ops il4965_mac_ops = { 6338 .tx = il4965_mac_tx, 6339 .start = il4965_mac_start, 6340 .stop = il4965_mac_stop, 6341 .add_interface = il_mac_add_interface, 6342 .remove_interface = il_mac_remove_interface, 6343 .change_interface = il_mac_change_interface, 6344 .config = il_mac_config, 6345 .configure_filter = il4965_configure_filter, 6346 .set_key = il4965_mac_set_key, 6347 .update_tkip_key = il4965_mac_update_tkip_key, 6348 .conf_tx = il_mac_conf_tx, 6349 .reset_tsf = il_mac_reset_tsf, 6350 .bss_info_changed = il_mac_bss_info_changed, 6351 .ampdu_action = il4965_mac_ampdu_action, 6352 .hw_scan = il_mac_hw_scan, 6353 .sta_add = il4965_mac_sta_add, 6354 .sta_remove = il_mac_sta_remove, 6355 .channel_switch = il4965_mac_channel_switch, 6356 .tx_last_beacon = il_mac_tx_last_beacon, 6357 .flush = il_mac_flush, 6358 }; 6359 6360 static int 6361 il4965_init_drv(struct il_priv *il) 6362 { 6363 int ret; 6364 6365 spin_lock_init(&il->sta_lock); 6366 spin_lock_init(&il->hcmd_lock); 6367 6368 INIT_LIST_HEAD(&il->free_frames); 6369 6370 mutex_init(&il->mutex); 6371 6372 il->ieee_channels = NULL; 6373 il->ieee_rates = NULL; 6374 il->band = NL80211_BAND_2GHZ; 6375 6376 il->iw_mode = NL80211_IFTYPE_STATION; 6377 il->current_ht_config.smps = IEEE80211_SMPS_STATIC; 6378 il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF; 6379 6380 /* initialize force reset */ 6381 il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD; 6382 6383 /* Choose which receivers/antennas to use */ 6384 if (il->ops->set_rxon_chain) 6385 il->ops->set_rxon_chain(il); 6386 6387 il_init_scan_params(il); 6388 6389 ret = il_init_channel_map(il); 6390 if (ret) { 6391 IL_ERR("initializing regulatory failed: %d\n", ret); 6392 goto err; 6393 } 6394 6395 ret = il_init_geos(il); 6396 if (ret) { 6397 IL_ERR("initializing geos failed: %d\n", ret); 6398 goto err_free_channel_map; 6399 } 6400 il4965_init_hw_rates(il, il->ieee_rates); 6401 6402 return 0; 6403 6404 err_free_channel_map: 6405 il_free_channel_map(il); 6406 err: 6407 return ret; 6408 } 6409 6410 static void 6411 il4965_uninit_drv(struct il_priv *il) 6412 { 6413 il_free_geos(il); 6414 il_free_channel_map(il); 6415 kfree(il->scan_cmd); 6416 } 6417 6418 static void 6419 il4965_hw_detect(struct il_priv *il) 6420 { 6421 il->hw_rev = _il_rd(il, CSR_HW_REV); 6422 il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG); 6423 il->rev_id = il->pci_dev->revision; 6424 D_INFO("HW Revision ID = 0x%X\n", il->rev_id); 6425 } 6426 6427 static const struct il_sensitivity_ranges il4965_sensitivity = { 6428 .min_nrg_cck = 97, 6429 .max_nrg_cck = 0, /* not used, set to 0 */ 6430 6431 .auto_corr_min_ofdm = 85, 6432 .auto_corr_min_ofdm_mrc = 170, 6433 .auto_corr_min_ofdm_x1 = 105, 6434 .auto_corr_min_ofdm_mrc_x1 = 220, 6435 6436 .auto_corr_max_ofdm = 120, 6437 .auto_corr_max_ofdm_mrc = 210, 6438 .auto_corr_max_ofdm_x1 = 140, 6439 .auto_corr_max_ofdm_mrc_x1 = 270, 6440 6441 .auto_corr_min_cck = 125, 6442 .auto_corr_max_cck = 200, 6443 .auto_corr_min_cck_mrc = 200, 6444 .auto_corr_max_cck_mrc = 400, 6445 6446 .nrg_th_cck = 100, 6447 .nrg_th_ofdm = 100, 6448 6449 .barker_corr_th_min = 190, 6450 .barker_corr_th_min_mrc = 390, 6451 .nrg_th_cca = 62, 6452 }; 6453 6454 static void 6455 il4965_set_hw_params(struct il_priv *il) 6456 { 6457 il->hw_params.bcast_id = IL4965_BROADCAST_ID; 6458 il->hw_params.max_rxq_size = RX_QUEUE_SIZE; 6459 il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; 6460 if (il->cfg->mod_params->amsdu_size_8K) 6461 il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K); 6462 else 6463 il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K); 6464 6465 il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL; 6466 6467 if (il->cfg->mod_params->disable_11n) 6468 il->cfg->sku &= ~IL_SKU_N; 6469 6470 if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES && 6471 il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES) 6472 il->cfg->num_of_queues = 6473 il->cfg->mod_params->num_of_queues; 6474 6475 il->hw_params.max_txq_num = il->cfg->num_of_queues; 6476 il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM; 6477 il->hw_params.scd_bc_tbls_size = 6478 il->cfg->num_of_queues * 6479 sizeof(struct il4965_scd_bc_tbl); 6480 6481 il->hw_params.tfd_size = sizeof(struct il_tfd); 6482 il->hw_params.max_stations = IL4965_STATION_COUNT; 6483 il->hw_params.max_data_size = IL49_RTC_DATA_SIZE; 6484 il->hw_params.max_inst_size = IL49_RTC_INST_SIZE; 6485 il->hw_params.max_bsm_size = BSM_SRAM_SIZE; 6486 il->hw_params.ht40_channel = BIT(NL80211_BAND_5GHZ); 6487 6488 il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR; 6489 6490 il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant); 6491 il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant); 6492 il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant; 6493 il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant; 6494 6495 il->hw_params.ct_kill_threshold = 6496 CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY); 6497 6498 il->hw_params.sens = &il4965_sensitivity; 6499 il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS; 6500 } 6501 6502 static int 6503 il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 6504 { 6505 int err = 0; 6506 struct il_priv *il; 6507 struct ieee80211_hw *hw; 6508 struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data); 6509 unsigned long flags; 6510 u16 pci_cmd; 6511 6512 /************************ 6513 * 1. Allocating HW data 6514 ************************/ 6515 6516 hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il4965_mac_ops); 6517 if (!hw) { 6518 err = -ENOMEM; 6519 goto out; 6520 } 6521 il = hw->priv; 6522 il->hw = hw; 6523 SET_IEEE80211_DEV(hw, &pdev->dev); 6524 6525 D_INFO("*** LOAD DRIVER ***\n"); 6526 il->cfg = cfg; 6527 il->ops = &il4965_ops; 6528 #ifdef CONFIG_IWLEGACY_DEBUGFS 6529 il->debugfs_ops = &il4965_debugfs_ops; 6530 #endif 6531 il->pci_dev = pdev; 6532 il->inta_mask = CSR_INI_SET_MASK; 6533 6534 /************************** 6535 * 2. Initializing PCI bus 6536 **************************/ 6537 pci_disable_link_state(pdev, 6538 PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | 6539 PCIE_LINK_STATE_CLKPM); 6540 6541 if (pci_enable_device(pdev)) { 6542 err = -ENODEV; 6543 goto out_ieee80211_free_hw; 6544 } 6545 6546 pci_set_master(pdev); 6547 6548 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); 6549 if (!err) 6550 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); 6551 if (err) { 6552 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); 6553 if (!err) 6554 err = 6555 pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); 6556 /* both attempts failed: */ 6557 if (err) { 6558 IL_WARN("No suitable DMA available.\n"); 6559 goto out_pci_disable_device; 6560 } 6561 } 6562 6563 err = pci_request_regions(pdev, DRV_NAME); 6564 if (err) 6565 goto out_pci_disable_device; 6566 6567 pci_set_drvdata(pdev, il); 6568 6569 /*********************** 6570 * 3. Read REV register 6571 ***********************/ 6572 il->hw_base = pci_ioremap_bar(pdev, 0); 6573 if (!il->hw_base) { 6574 err = -ENODEV; 6575 goto out_pci_release_regions; 6576 } 6577 6578 D_INFO("pci_resource_len = 0x%08llx\n", 6579 (unsigned long long)pci_resource_len(pdev, 0)); 6580 D_INFO("pci_resource_base = %p\n", il->hw_base); 6581 6582 /* these spin locks will be used in apm_ops.init and EEPROM access 6583 * we should init now 6584 */ 6585 spin_lock_init(&il->reg_lock); 6586 spin_lock_init(&il->lock); 6587 6588 /* 6589 * stop and reset the on-board processor just in case it is in a 6590 * strange state ... like being left stranded by a primary kernel 6591 * and this is now the kdump kernel trying to start up 6592 */ 6593 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); 6594 6595 il4965_hw_detect(il); 6596 IL_INFO("Detected %s, REV=0x%X\n", il->cfg->name, il->hw_rev); 6597 6598 /* We disable the RETRY_TIMEOUT register (0x41) to keep 6599 * PCI Tx retries from interfering with C3 CPU state */ 6600 pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); 6601 6602 il4965_prepare_card_hw(il); 6603 if (!il->hw_ready) { 6604 IL_WARN("Failed, HW not ready\n"); 6605 err = -EIO; 6606 goto out_iounmap; 6607 } 6608 6609 /***************** 6610 * 4. Read EEPROM 6611 *****************/ 6612 /* Read the EEPROM */ 6613 err = il_eeprom_init(il); 6614 if (err) { 6615 IL_ERR("Unable to init EEPROM\n"); 6616 goto out_iounmap; 6617 } 6618 err = il4965_eeprom_check_version(il); 6619 if (err) 6620 goto out_free_eeprom; 6621 6622 /* extract MAC Address */ 6623 il4965_eeprom_get_mac(il, il->addresses[0].addr); 6624 D_INFO("MAC address: %pM\n", il->addresses[0].addr); 6625 il->hw->wiphy->addresses = il->addresses; 6626 il->hw->wiphy->n_addresses = 1; 6627 6628 /************************ 6629 * 5. Setup HW constants 6630 ************************/ 6631 il4965_set_hw_params(il); 6632 6633 /******************* 6634 * 6. Setup il 6635 *******************/ 6636 6637 err = il4965_init_drv(il); 6638 if (err) 6639 goto out_free_eeprom; 6640 /* At this point both hw and il are initialized. */ 6641 6642 /******************** 6643 * 7. Setup services 6644 ********************/ 6645 spin_lock_irqsave(&il->lock, flags); 6646 il_disable_interrupts(il); 6647 spin_unlock_irqrestore(&il->lock, flags); 6648 6649 pci_enable_msi(il->pci_dev); 6650 6651 err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il); 6652 if (err) { 6653 IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq); 6654 goto out_disable_msi; 6655 } 6656 6657 il4965_setup_deferred_work(il); 6658 il4965_setup_handlers(il); 6659 6660 /********************************************* 6661 * 8. Enable interrupts and read RFKILL state 6662 *********************************************/ 6663 6664 /* enable rfkill interrupt: hw bug w/a */ 6665 pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd); 6666 if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { 6667 pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; 6668 pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd); 6669 } 6670 6671 il_enable_rfkill_int(il); 6672 6673 /* If platform's RF_KILL switch is NOT set to KILL */ 6674 if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) 6675 clear_bit(S_RFKILL, &il->status); 6676 else 6677 set_bit(S_RFKILL, &il->status); 6678 6679 wiphy_rfkill_set_hw_state(il->hw->wiphy, 6680 test_bit(S_RFKILL, &il->status)); 6681 6682 il_power_initialize(il); 6683 6684 init_completion(&il->_4965.firmware_loading_complete); 6685 6686 err = il4965_request_firmware(il, true); 6687 if (err) 6688 goto out_destroy_workqueue; 6689 6690 return 0; 6691 6692 out_destroy_workqueue: 6693 destroy_workqueue(il->workqueue); 6694 il->workqueue = NULL; 6695 free_irq(il->pci_dev->irq, il); 6696 out_disable_msi: 6697 pci_disable_msi(il->pci_dev); 6698 il4965_uninit_drv(il); 6699 out_free_eeprom: 6700 il_eeprom_free(il); 6701 out_iounmap: 6702 iounmap(il->hw_base); 6703 out_pci_release_regions: 6704 pci_release_regions(pdev); 6705 out_pci_disable_device: 6706 pci_disable_device(pdev); 6707 out_ieee80211_free_hw: 6708 ieee80211_free_hw(il->hw); 6709 out: 6710 return err; 6711 } 6712 6713 static void 6714 il4965_pci_remove(struct pci_dev *pdev) 6715 { 6716 struct il_priv *il = pci_get_drvdata(pdev); 6717 unsigned long flags; 6718 6719 if (!il) 6720 return; 6721 6722 wait_for_completion(&il->_4965.firmware_loading_complete); 6723 6724 D_INFO("*** UNLOAD DRIVER ***\n"); 6725 6726 il_dbgfs_unregister(il); 6727 sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group); 6728 6729 /* ieee80211_unregister_hw call wil cause il_mac_stop to 6730 * to be called and il4965_down since we are removing the device 6731 * we need to set S_EXIT_PENDING bit. 6732 */ 6733 set_bit(S_EXIT_PENDING, &il->status); 6734 6735 il_leds_exit(il); 6736 6737 if (il->mac80211_registered) { 6738 ieee80211_unregister_hw(il->hw); 6739 il->mac80211_registered = 0; 6740 } else { 6741 il4965_down(il); 6742 } 6743 6744 /* 6745 * Make sure device is reset to low power before unloading driver. 6746 * This may be redundant with il4965_down(), but there are paths to 6747 * run il4965_down() without calling apm_ops.stop(), and there are 6748 * paths to avoid running il4965_down() at all before leaving driver. 6749 * This (inexpensive) call *makes sure* device is reset. 6750 */ 6751 il_apm_stop(il); 6752 6753 /* make sure we flush any pending irq or 6754 * tasklet for the driver 6755 */ 6756 spin_lock_irqsave(&il->lock, flags); 6757 il_disable_interrupts(il); 6758 spin_unlock_irqrestore(&il->lock, flags); 6759 6760 il4965_synchronize_irq(il); 6761 6762 il4965_dealloc_ucode_pci(il); 6763 6764 if (il->rxq.bd) 6765 il4965_rx_queue_free(il, &il->rxq); 6766 il4965_hw_txq_ctx_free(il); 6767 6768 il_eeprom_free(il); 6769 6770 /*netif_stop_queue(dev); */ 6771 flush_workqueue(il->workqueue); 6772 6773 /* ieee80211_unregister_hw calls il_mac_stop, which flushes 6774 * il->workqueue... so we can't take down the workqueue 6775 * until now... */ 6776 destroy_workqueue(il->workqueue); 6777 il->workqueue = NULL; 6778 6779 free_irq(il->pci_dev->irq, il); 6780 pci_disable_msi(il->pci_dev); 6781 iounmap(il->hw_base); 6782 pci_release_regions(pdev); 6783 pci_disable_device(pdev); 6784 6785 il4965_uninit_drv(il); 6786 6787 dev_kfree_skb(il->beacon_skb); 6788 6789 ieee80211_free_hw(il->hw); 6790 } 6791 6792 /* 6793 * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask 6794 * must be called under il->lock and mac access 6795 */ 6796 void 6797 il4965_txq_set_sched(struct il_priv *il, u32 mask) 6798 { 6799 il_wr_prph(il, IL49_SCD_TXFACT, mask); 6800 } 6801 6802 /***************************************************************************** 6803 * 6804 * driver and module entry point 6805 * 6806 *****************************************************************************/ 6807 6808 /* Hardware specific file defines the PCI IDs table for that hardware module */ 6809 static const struct pci_device_id il4965_hw_card_ids[] = { 6810 {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)}, 6811 {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)}, 6812 {0} 6813 }; 6814 MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids); 6815 6816 static struct pci_driver il4965_driver = { 6817 .name = DRV_NAME, 6818 .id_table = il4965_hw_card_ids, 6819 .probe = il4965_pci_probe, 6820 .remove = il4965_pci_remove, 6821 .driver.pm = IL_LEGACY_PM_OPS, 6822 }; 6823 6824 static int __init 6825 il4965_init(void) 6826 { 6827 6828 int ret; 6829 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); 6830 pr_info(DRV_COPYRIGHT "\n"); 6831 6832 ret = il4965_rate_control_register(); 6833 if (ret) { 6834 pr_err("Unable to register rate control algorithm: %d\n", ret); 6835 return ret; 6836 } 6837 6838 ret = pci_register_driver(&il4965_driver); 6839 if (ret) { 6840 pr_err("Unable to initialize PCI module\n"); 6841 goto error_register; 6842 } 6843 6844 return ret; 6845 6846 error_register: 6847 il4965_rate_control_unregister(); 6848 return ret; 6849 } 6850 6851 static void __exit 6852 il4965_exit(void) 6853 { 6854 pci_unregister_driver(&il4965_driver); 6855 il4965_rate_control_unregister(); 6856 } 6857 6858 module_exit(il4965_exit); 6859 module_init(il4965_init); 6860 6861 #ifdef CONFIG_IWLEGACY_DEBUG 6862 module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR); 6863 MODULE_PARM_DESC(debug, "debug output mask"); 6864 #endif 6865 6866 module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, S_IRUGO); 6867 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); 6868 module_param_named(queues_num, il4965_mod_params.num_of_queues, int, S_IRUGO); 6869 MODULE_PARM_DESC(queues_num, "number of hw queues."); 6870 module_param_named(11n_disable, il4965_mod_params.disable_11n, int, S_IRUGO); 6871 MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); 6872 module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int, 6873 S_IRUGO); 6874 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])"); 6875 module_param_named(fw_restart, il4965_mod_params.restart_fw, int, S_IRUGO); 6876 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); 6877