1 // SPDX-License-Identifier: GPL-2.0-only 2 /****************************************************************************** 3 * 4 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. 5 * 6 * Portions of this file are derived from the ipw3945 project, as well 7 * as portions of the ieee80211 subsystem header files. 8 * 9 * Contact Information: 10 * Intel Linux Wireless <ilw@linux.intel.com> 11 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 12 * 13 *****************************************************************************/ 14 15 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 16 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/init.h> 20 #include <linux/pci.h> 21 #include <linux/slab.h> 22 #include <linux/dma-mapping.h> 23 #include <linux/delay.h> 24 #include <linux/sched.h> 25 #include <linux/skbuff.h> 26 #include <linux/netdevice.h> 27 #include <linux/firmware.h> 28 #include <linux/etherdevice.h> 29 #include <linux/if_arp.h> 30 31 #include <net/ieee80211_radiotap.h> 32 #include <net/mac80211.h> 33 34 #include <asm/div64.h> 35 36 #define DRV_NAME "iwl3945" 37 38 #include "commands.h" 39 #include "common.h" 40 #include "3945.h" 41 #include "iwl-spectrum.h" 42 43 /* 44 * module name, copyright, version, etc. 45 */ 46 47 #define DRV_DESCRIPTION \ 48 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux" 49 50 #ifdef CONFIG_IWLEGACY_DEBUG 51 #define VD "d" 52 #else 53 #define VD 54 #endif 55 56 /* 57 * add "s" to indicate spectrum measurement included. 58 * we add it here to be consistent with previous releases in which 59 * this was configurable. 60 */ 61 #define DRV_VERSION IWLWIFI_VERSION VD "s" 62 #define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation" 63 #define DRV_AUTHOR "<ilw@linux.intel.com>" 64 65 MODULE_DESCRIPTION(DRV_DESCRIPTION); 66 MODULE_VERSION(DRV_VERSION); 67 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); 68 MODULE_LICENSE("GPL"); 69 70 /* module parameters */ 71 struct il_mod_params il3945_mod_params = { 72 .sw_crypto = 1, 73 .restart_fw = 1, 74 .disable_hw_scan = 1, 75 /* the rest are 0 by default */ 76 }; 77 78 /** 79 * il3945_get_antenna_flags - Get antenna flags for RXON command 80 * @il: eeprom and antenna fields are used to determine antenna flags 81 * 82 * il->eeprom39 is used to determine if antenna AUX/MAIN are reversed 83 * il3945_mod_params.antenna specifies the antenna diversity mode: 84 * 85 * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself 86 * IL_ANTENNA_MAIN - Force MAIN antenna 87 * IL_ANTENNA_AUX - Force AUX antenna 88 */ 89 __le32 90 il3945_get_antenna_flags(const struct il_priv *il) 91 { 92 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 93 94 switch (il3945_mod_params.antenna) { 95 case IL_ANTENNA_DIVERSITY: 96 return 0; 97 98 case IL_ANTENNA_MAIN: 99 if (eeprom->antenna_switch_type) 100 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; 101 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; 102 103 case IL_ANTENNA_AUX: 104 if (eeprom->antenna_switch_type) 105 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; 106 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; 107 } 108 109 /* bad antenna selector value */ 110 IL_ERR("Bad antenna selector value (0x%x)\n", 111 il3945_mod_params.antenna); 112 113 return 0; /* "diversity" is default if error */ 114 } 115 116 static int 117 il3945_set_ccmp_dynamic_key_info(struct il_priv *il, 118 struct ieee80211_key_conf *keyconf, u8 sta_id) 119 { 120 unsigned long flags; 121 __le16 key_flags = 0; 122 int ret; 123 124 key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); 125 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); 126 127 if (sta_id == il->hw_params.bcast_id) 128 key_flags |= STA_KEY_MULTICAST_MSK; 129 130 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 131 keyconf->hw_key_idx = keyconf->keyidx; 132 key_flags &= ~STA_KEY_FLG_INVALID; 133 134 spin_lock_irqsave(&il->sta_lock, flags); 135 il->stations[sta_id].keyinfo.cipher = keyconf->cipher; 136 il->stations[sta_id].keyinfo.keylen = keyconf->keylen; 137 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); 138 139 memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); 140 141 if ((il->stations[sta_id].sta.key. 142 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) 143 il->stations[sta_id].sta.key.key_offset = 144 il_get_free_ucode_key_idx(il); 145 /* else, we are overriding an existing key => no need to allocated room 146 * in uCode. */ 147 148 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, 149 "no space for a new key"); 150 151 il->stations[sta_id].sta.key.key_flags = key_flags; 152 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 153 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 154 155 D_INFO("hwcrypto: modify ucode station key info\n"); 156 157 ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); 158 159 spin_unlock_irqrestore(&il->sta_lock, flags); 160 161 return ret; 162 } 163 164 static int 165 il3945_set_tkip_dynamic_key_info(struct il_priv *il, 166 struct ieee80211_key_conf *keyconf, u8 sta_id) 167 { 168 return -EOPNOTSUPP; 169 } 170 171 static int 172 il3945_set_wep_dynamic_key_info(struct il_priv *il, 173 struct ieee80211_key_conf *keyconf, u8 sta_id) 174 { 175 return -EOPNOTSUPP; 176 } 177 178 static int 179 il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id) 180 { 181 unsigned long flags; 182 struct il_addsta_cmd sta_cmd; 183 184 spin_lock_irqsave(&il->sta_lock, flags); 185 memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key)); 186 memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo)); 187 il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; 188 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 189 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 190 memcpy(&sta_cmd, &il->stations[sta_id].sta, 191 sizeof(struct il_addsta_cmd)); 192 spin_unlock_irqrestore(&il->sta_lock, flags); 193 194 D_INFO("hwcrypto: clear ucode station key info\n"); 195 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 196 } 197 198 static int 199 il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, 200 u8 sta_id) 201 { 202 int ret = 0; 203 204 keyconf->hw_key_idx = HW_KEY_DYNAMIC; 205 206 switch (keyconf->cipher) { 207 case WLAN_CIPHER_SUITE_CCMP: 208 ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id); 209 break; 210 case WLAN_CIPHER_SUITE_TKIP: 211 ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id); 212 break; 213 case WLAN_CIPHER_SUITE_WEP40: 214 case WLAN_CIPHER_SUITE_WEP104: 215 ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id); 216 break; 217 default: 218 IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher); 219 ret = -EINVAL; 220 } 221 222 D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n", 223 keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret); 224 225 return ret; 226 } 227 228 static int 229 il3945_remove_static_key(struct il_priv *il) 230 { 231 return -EOPNOTSUPP; 232 } 233 234 static int 235 il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key) 236 { 237 if (key->cipher == WLAN_CIPHER_SUITE_WEP40 || 238 key->cipher == WLAN_CIPHER_SUITE_WEP104) 239 return -EOPNOTSUPP; 240 241 IL_ERR("Static key invalid: cipher %x\n", key->cipher); 242 return -EINVAL; 243 } 244 245 static void 246 il3945_clear_free_frames(struct il_priv *il) 247 { 248 struct list_head *element; 249 250 D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count); 251 252 while (!list_empty(&il->free_frames)) { 253 element = il->free_frames.next; 254 list_del(element); 255 kfree(list_entry(element, struct il3945_frame, list)); 256 il->frames_count--; 257 } 258 259 if (il->frames_count) { 260 IL_WARN("%d frames still in use. Did we lose one?\n", 261 il->frames_count); 262 il->frames_count = 0; 263 } 264 } 265 266 static struct il3945_frame * 267 il3945_get_free_frame(struct il_priv *il) 268 { 269 struct il3945_frame *frame; 270 struct list_head *element; 271 if (list_empty(&il->free_frames)) { 272 frame = kzalloc(sizeof(*frame), GFP_KERNEL); 273 if (!frame) { 274 IL_ERR("Could not allocate frame!\n"); 275 return NULL; 276 } 277 278 il->frames_count++; 279 return frame; 280 } 281 282 element = il->free_frames.next; 283 list_del(element); 284 return list_entry(element, struct il3945_frame, list); 285 } 286 287 static void 288 il3945_free_frame(struct il_priv *il, struct il3945_frame *frame) 289 { 290 memset(frame, 0, sizeof(*frame)); 291 list_add(&frame->list, &il->free_frames); 292 } 293 294 unsigned int 295 il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr, 296 int left) 297 { 298 299 if (!il_is_associated(il) || !il->beacon_skb) 300 return 0; 301 302 if (il->beacon_skb->len > left) 303 return 0; 304 305 memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len); 306 307 return il->beacon_skb->len; 308 } 309 310 static int 311 il3945_send_beacon_cmd(struct il_priv *il) 312 { 313 struct il3945_frame *frame; 314 unsigned int frame_size; 315 int rc; 316 u8 rate; 317 318 frame = il3945_get_free_frame(il); 319 320 if (!frame) { 321 IL_ERR("Could not obtain free frame buffer for beacon " 322 "command.\n"); 323 return -ENOMEM; 324 } 325 326 rate = il_get_lowest_plcp(il); 327 328 frame_size = il3945_hw_get_beacon_cmd(il, frame, rate); 329 330 rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]); 331 332 il3945_free_frame(il, frame); 333 334 return rc; 335 } 336 337 static void 338 il3945_unset_hw_params(struct il_priv *il) 339 { 340 if (il->_3945.shared_virt) 341 dma_free_coherent(&il->pci_dev->dev, 342 sizeof(struct il3945_shared), 343 il->_3945.shared_virt, il->_3945.shared_phys); 344 } 345 346 static void 347 il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info, 348 struct il_device_cmd *cmd, 349 struct sk_buff *skb_frag, int sta_id) 350 { 351 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload; 352 struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo; 353 354 tx_cmd->sec_ctl = 0; 355 356 switch (keyinfo->cipher) { 357 case WLAN_CIPHER_SUITE_CCMP: 358 tx_cmd->sec_ctl = TX_CMD_SEC_CCM; 359 memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen); 360 D_TX("tx_cmd with AES hwcrypto\n"); 361 break; 362 363 case WLAN_CIPHER_SUITE_TKIP: 364 break; 365 366 case WLAN_CIPHER_SUITE_WEP104: 367 tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; 368 fallthrough; 369 case WLAN_CIPHER_SUITE_WEP40: 370 tx_cmd->sec_ctl |= 371 TX_CMD_SEC_WEP | (info->control.hw_key-> 372 hw_key_idx & TX_CMD_SEC_MSK) << 373 TX_CMD_SEC_SHIFT; 374 375 memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen); 376 377 D_TX("Configuring packet for WEP encryption " "with key %d\n", 378 info->control.hw_key->hw_key_idx); 379 break; 380 381 default: 382 IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher); 383 break; 384 } 385 } 386 387 /* 388 * handle build C_TX command notification. 389 */ 390 static void 391 il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd, 392 struct ieee80211_tx_info *info, 393 struct ieee80211_hdr *hdr, u8 std_id) 394 { 395 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload; 396 __le32 tx_flags = tx_cmd->tx_flags; 397 __le16 fc = hdr->frame_control; 398 399 tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 400 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { 401 tx_flags |= TX_CMD_FLG_ACK_MSK; 402 if (ieee80211_is_mgmt(fc)) 403 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 404 if (ieee80211_is_probe_resp(fc) && 405 !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) 406 tx_flags |= TX_CMD_FLG_TSF_MSK; 407 } else { 408 tx_flags &= (~TX_CMD_FLG_ACK_MSK); 409 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 410 } 411 412 tx_cmd->sta_id = std_id; 413 if (ieee80211_has_morefrags(fc)) 414 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; 415 416 if (ieee80211_is_data_qos(fc)) { 417 u8 *qc = ieee80211_get_qos_ctl(hdr); 418 tx_cmd->tid_tspec = qc[0] & 0xf; 419 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; 420 } else { 421 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 422 } 423 424 il_tx_cmd_protection(il, info, fc, &tx_flags); 425 426 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); 427 if (ieee80211_is_mgmt(fc)) { 428 if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) 429 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); 430 else 431 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); 432 } else { 433 tx_cmd->timeout.pm_frame_timeout = 0; 434 } 435 436 tx_cmd->driver_txop = 0; 437 tx_cmd->tx_flags = tx_flags; 438 tx_cmd->next_frame_len = 0; 439 } 440 441 /* 442 * start C_TX command process 443 */ 444 static int 445 il3945_tx_skb(struct il_priv *il, 446 struct ieee80211_sta *sta, 447 struct sk_buff *skb) 448 { 449 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; 450 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); 451 struct il3945_tx_cmd *tx_cmd; 452 struct il_tx_queue *txq = NULL; 453 struct il_queue *q = NULL; 454 struct il_device_cmd *out_cmd; 455 struct il_cmd_meta *out_meta; 456 dma_addr_t phys_addr; 457 dma_addr_t txcmd_phys; 458 int txq_id = skb_get_queue_mapping(skb); 459 u16 len, idx, hdr_len; 460 u16 firstlen, secondlen; 461 u8 sta_id; 462 u8 tid = 0; 463 __le16 fc; 464 u8 wait_write_ptr = 0; 465 unsigned long flags; 466 467 spin_lock_irqsave(&il->lock, flags); 468 if (il_is_rfkill(il)) { 469 D_DROP("Dropping - RF KILL\n"); 470 goto drop_unlock; 471 } 472 473 if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) == 474 IL_INVALID_RATE) { 475 IL_ERR("ERROR: No TX rate available.\n"); 476 goto drop_unlock; 477 } 478 479 fc = hdr->frame_control; 480 481 #ifdef CONFIG_IWLEGACY_DEBUG 482 if (ieee80211_is_auth(fc)) 483 D_TX("Sending AUTH frame\n"); 484 else if (ieee80211_is_assoc_req(fc)) 485 D_TX("Sending ASSOC frame\n"); 486 else if (ieee80211_is_reassoc_req(fc)) 487 D_TX("Sending REASSOC frame\n"); 488 #endif 489 490 spin_unlock_irqrestore(&il->lock, flags); 491 492 hdr_len = ieee80211_hdrlen(fc); 493 494 /* Find idx into station table for destination station */ 495 sta_id = il_sta_id_or_broadcast(il, sta); 496 if (sta_id == IL_INVALID_STATION) { 497 D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1); 498 goto drop; 499 } 500 501 D_RATE("station Id %d\n", sta_id); 502 503 if (ieee80211_is_data_qos(fc)) { 504 u8 *qc = ieee80211_get_qos_ctl(hdr); 505 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; 506 if (unlikely(tid >= MAX_TID_COUNT)) 507 goto drop; 508 } 509 510 /* Descriptor for chosen Tx queue */ 511 txq = &il->txq[txq_id]; 512 q = &txq->q; 513 514 if ((il_queue_space(q) < q->high_mark)) 515 goto drop; 516 517 spin_lock_irqsave(&il->lock, flags); 518 519 idx = il_get_cmd_idx(q, q->write_ptr, 0); 520 521 txq->skbs[q->write_ptr] = skb; 522 523 /* Init first empty entry in queue's array of Tx/cmd buffers */ 524 out_cmd = txq->cmd[idx]; 525 out_meta = &txq->meta[idx]; 526 tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload; 527 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); 528 memset(tx_cmd, 0, sizeof(*tx_cmd)); 529 530 /* 531 * Set up the Tx-command (not MAC!) header. 532 * Store the chosen Tx queue and TFD idx within the sequence field; 533 * after Tx, uCode's Tx response will return this value so driver can 534 * locate the frame within the tx queue and do post-tx processing. 535 */ 536 out_cmd->hdr.cmd = C_TX; 537 out_cmd->hdr.sequence = 538 cpu_to_le16((u16) 539 (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr))); 540 541 /* Copy MAC header from skb into command buffer */ 542 memcpy(tx_cmd->hdr, hdr, hdr_len); 543 544 if (info->control.hw_key) 545 il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id); 546 547 /* TODO need this for burst mode later on */ 548 il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id); 549 550 il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id); 551 552 /* Total # bytes to be transmitted */ 553 tx_cmd->len = cpu_to_le16((u16) skb->len); 554 555 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; 556 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; 557 558 /* 559 * Use the first empty entry in this queue's command buffer array 560 * to contain the Tx command and MAC header concatenated together 561 * (payload data will be in another buffer). 562 * Size of this varies, due to varying MAC header length. 563 * If end is not dword aligned, we'll have 2 extra bytes at the end 564 * of the MAC header (device reads on dword boundaries). 565 * We'll tell device about this padding later. 566 */ 567 len = 568 sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) + 569 hdr_len; 570 firstlen = (len + 3) & ~3; 571 572 /* Physical address of this Tx command's header (not MAC header!), 573 * within command buffer array. */ 574 txcmd_phys = dma_map_single(&il->pci_dev->dev, &out_cmd->hdr, firstlen, 575 DMA_TO_DEVICE); 576 if (unlikely(dma_mapping_error(&il->pci_dev->dev, txcmd_phys))) 577 goto drop_unlock; 578 579 /* Set up TFD's 2nd entry to point directly to remainder of skb, 580 * if any (802.11 null frames have no payload). */ 581 secondlen = skb->len - hdr_len; 582 if (secondlen > 0) { 583 phys_addr = dma_map_single(&il->pci_dev->dev, skb->data + hdr_len, 584 secondlen, DMA_TO_DEVICE); 585 if (unlikely(dma_mapping_error(&il->pci_dev->dev, phys_addr))) 586 goto drop_unlock; 587 } 588 589 /* Add buffer containing Tx command and MAC(!) header to TFD's 590 * first entry */ 591 il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); 592 dma_unmap_addr_set(out_meta, mapping, txcmd_phys); 593 dma_unmap_len_set(out_meta, len, firstlen); 594 if (secondlen > 0) 595 il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0, 596 U32_PAD(secondlen)); 597 598 if (!ieee80211_has_morefrags(hdr->frame_control)) { 599 txq->need_update = 1; 600 } else { 601 wait_write_ptr = 1; 602 txq->need_update = 0; 603 } 604 605 il_update_stats(il, true, fc, skb->len); 606 607 D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); 608 D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); 609 il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd)); 610 il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, 611 ieee80211_hdrlen(fc)); 612 613 /* Tell device the write idx *just past* this latest filled TFD */ 614 q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); 615 il_txq_update_write_ptr(il, txq); 616 spin_unlock_irqrestore(&il->lock, flags); 617 618 if (il_queue_space(q) < q->high_mark && il->mac80211_registered) { 619 if (wait_write_ptr) { 620 spin_lock_irqsave(&il->lock, flags); 621 txq->need_update = 1; 622 il_txq_update_write_ptr(il, txq); 623 spin_unlock_irqrestore(&il->lock, flags); 624 } 625 626 il_stop_queue(il, txq); 627 } 628 629 return 0; 630 631 drop_unlock: 632 spin_unlock_irqrestore(&il->lock, flags); 633 drop: 634 return -1; 635 } 636 637 static int 638 il3945_get_measurement(struct il_priv *il, 639 struct ieee80211_measurement_params *params, u8 type) 640 { 641 struct il_spectrum_cmd spectrum; 642 struct il_rx_pkt *pkt; 643 struct il_host_cmd cmd = { 644 .id = C_SPECTRUM_MEASUREMENT, 645 .data = (void *)&spectrum, 646 .flags = CMD_WANT_SKB, 647 }; 648 u32 add_time = le64_to_cpu(params->start_time); 649 int rc; 650 int spectrum_resp_status; 651 int duration = le16_to_cpu(params->duration); 652 653 if (il_is_associated(il)) 654 add_time = 655 il_usecs_to_beacons(il, 656 le64_to_cpu(params->start_time) - 657 il->_3945.last_tsf, 658 le16_to_cpu(il->timing.beacon_interval)); 659 660 memset(&spectrum, 0, sizeof(spectrum)); 661 662 spectrum.channel_count = cpu_to_le16(1); 663 spectrum.flags = 664 RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; 665 spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; 666 cmd.len = sizeof(spectrum); 667 spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); 668 669 if (il_is_associated(il)) 670 spectrum.start_time = 671 il_add_beacon_time(il, il->_3945.last_beacon_time, add_time, 672 le16_to_cpu(il->timing.beacon_interval)); 673 else 674 spectrum.start_time = 0; 675 676 spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); 677 spectrum.channels[0].channel = params->channel; 678 spectrum.channels[0].type = type; 679 if (il->active.flags & RXON_FLG_BAND_24G_MSK) 680 spectrum.flags |= 681 RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK | 682 RXON_FLG_TGG_PROTECT_MSK; 683 684 rc = il_send_cmd_sync(il, &cmd); 685 if (rc) 686 return rc; 687 688 pkt = (struct il_rx_pkt *)cmd.reply_page; 689 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) { 690 IL_ERR("Bad return from N_RX_ON_ASSOC command\n"); 691 rc = -EIO; 692 } 693 694 spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status); 695 switch (spectrum_resp_status) { 696 case 0: /* Command will be handled */ 697 if (pkt->u.spectrum.id != 0xff) { 698 D_INFO("Replaced existing measurement: %d\n", 699 pkt->u.spectrum.id); 700 il->measurement_status &= ~MEASUREMENT_READY; 701 } 702 il->measurement_status |= MEASUREMENT_ACTIVE; 703 rc = 0; 704 break; 705 706 case 1: /* Command will not be handled */ 707 rc = -EAGAIN; 708 break; 709 } 710 711 il_free_pages(il, cmd.reply_page); 712 713 return rc; 714 } 715 716 static void 717 il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb) 718 { 719 struct il_rx_pkt *pkt = rxb_addr(rxb); 720 struct il_alive_resp *palive; 721 struct delayed_work *pwork; 722 723 palive = &pkt->u.alive_frame; 724 725 D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n", 726 palive->is_valid, palive->ver_type, palive->ver_subtype); 727 728 if (palive->ver_subtype == INITIALIZE_SUBTYPE) { 729 D_INFO("Initialization Alive received.\n"); 730 memcpy(&il->card_alive_init, &pkt->u.alive_frame, 731 sizeof(struct il_alive_resp)); 732 pwork = &il->init_alive_start; 733 } else { 734 D_INFO("Runtime Alive received.\n"); 735 memcpy(&il->card_alive, &pkt->u.alive_frame, 736 sizeof(struct il_alive_resp)); 737 pwork = &il->alive_start; 738 il3945_disable_events(il); 739 } 740 741 /* We delay the ALIVE response by 5ms to 742 * give the HW RF Kill time to activate... */ 743 if (palive->is_valid == UCODE_VALID_OK) 744 queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5)); 745 else 746 IL_WARN("uCode did not respond OK.\n"); 747 } 748 749 static void 750 il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb) 751 { 752 struct il_rx_pkt *pkt = rxb_addr(rxb); 753 754 D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status); 755 } 756 757 static void 758 il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb) 759 { 760 struct il_rx_pkt *pkt = rxb_addr(rxb); 761 struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status); 762 #ifdef CONFIG_IWLEGACY_DEBUG 763 u8 rate = beacon->beacon_notify_hdr.rate; 764 765 D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n", 766 le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK, 767 beacon->beacon_notify_hdr.failure_frame, 768 le32_to_cpu(beacon->ibss_mgr_status), 769 le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate); 770 #endif 771 772 il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); 773 774 } 775 776 /* Handle notification from uCode that card's power state is changing 777 * due to software, hardware, or critical temperature RFKILL */ 778 static void 779 il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb) 780 { 781 struct il_rx_pkt *pkt = rxb_addr(rxb); 782 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); 783 unsigned long status = il->status; 784 785 IL_WARN("Card state received: HW:%s SW:%s\n", 786 (flags & HW_CARD_DISABLED) ? "Kill" : "On", 787 (flags & SW_CARD_DISABLED) ? "Kill" : "On"); 788 789 _il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 790 791 if (flags & HW_CARD_DISABLED) 792 set_bit(S_RFKILL, &il->status); 793 else 794 clear_bit(S_RFKILL, &il->status); 795 796 il_scan_cancel(il); 797 798 if ((test_bit(S_RFKILL, &status) != 799 test_bit(S_RFKILL, &il->status))) 800 wiphy_rfkill_set_hw_state(il->hw->wiphy, 801 test_bit(S_RFKILL, &il->status)); 802 else 803 wake_up(&il->wait_command_queue); 804 } 805 806 /* 807 * il3945_setup_handlers - Initialize Rx handler callbacks 808 * 809 * Setup the RX handlers for each of the reply types sent from the uCode 810 * to the host. 811 * 812 * This function chains into the hardware specific files for them to setup 813 * any hardware specific handlers as well. 814 */ 815 static void 816 il3945_setup_handlers(struct il_priv *il) 817 { 818 il->handlers[N_ALIVE] = il3945_hdl_alive; 819 il->handlers[C_ADD_STA] = il3945_hdl_add_sta; 820 il->handlers[N_ERROR] = il_hdl_error; 821 il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa; 822 il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement; 823 il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep; 824 il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats; 825 il->handlers[N_BEACON] = il3945_hdl_beacon; 826 827 /* 828 * The same handler is used for both the REPLY to a discrete 829 * stats request from the host as well as for the periodic 830 * stats notifications (after received beacons) from the uCode. 831 */ 832 il->handlers[C_STATS] = il3945_hdl_c_stats; 833 il->handlers[N_STATS] = il3945_hdl_stats; 834 835 il_setup_rx_scan_handlers(il); 836 il->handlers[N_CARD_STATE] = il3945_hdl_card_state; 837 838 /* Set up hardware specific Rx handlers */ 839 il3945_hw_handler_setup(il); 840 } 841 842 /************************** RX-FUNCTIONS ****************************/ 843 /* 844 * Rx theory of operation 845 * 846 * The host allocates 32 DMA target addresses and passes the host address 847 * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is 848 * 0 to 31 849 * 850 * Rx Queue Indexes 851 * The host/firmware share two idx registers for managing the Rx buffers. 852 * 853 * The READ idx maps to the first position that the firmware may be writing 854 * to -- the driver can read up to (but not including) this position and get 855 * good data. 856 * The READ idx is managed by the firmware once the card is enabled. 857 * 858 * The WRITE idx maps to the last position the driver has read from -- the 859 * position preceding WRITE is the last slot the firmware can place a packet. 860 * 861 * The queue is empty (no good data) if WRITE = READ - 1, and is full if 862 * WRITE = READ. 863 * 864 * During initialization, the host sets up the READ queue position to the first 865 * IDX position, and WRITE to the last (READ - 1 wrapped) 866 * 867 * When the firmware places a packet in a buffer, it will advance the READ idx 868 * and fire the RX interrupt. The driver can then query the READ idx and 869 * process as many packets as possible, moving the WRITE idx forward as it 870 * resets the Rx queue buffers with new memory. 871 * 872 * The management in the driver is as follows: 873 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When 874 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled 875 * to replenish the iwl->rxq->rx_free. 876 * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the 877 * iwl->rxq is replenished and the READ IDX is updated (updating the 878 * 'processed' and 'read' driver idxes as well) 879 * + A received packet is processed and handed to the kernel network stack, 880 * detached from the iwl->rxq. The driver 'processed' idx is updated. 881 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free 882 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ 883 * IDX is not incremented and iwl->status(RX_STALLED) is set. If there 884 * were enough free buffers and RX_STALLED is set it is cleared. 885 * 886 * 887 * Driver sequence: 888 * 889 * il3945_rx_replenish() Replenishes rx_free list from rx_used, and calls 890 * il3945_rx_queue_restock 891 * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx 892 * queue, updates firmware pointers, and updates 893 * the WRITE idx. If insufficient rx_free buffers 894 * are available, schedules il3945_rx_replenish 895 * 896 * -- enable interrupts -- 897 * ISR - il3945_rx() Detach il_rx_bufs from pool up to the 898 * READ IDX, detaching the SKB from the pool. 899 * Moves the packet buffer from queue to rx_used. 900 * Calls il3945_rx_queue_restock to refill any empty 901 * slots. 902 * ... 903 * 904 */ 905 906 /* 907 * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr 908 */ 909 static inline __le32 910 il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr) 911 { 912 return cpu_to_le32((u32) dma_addr); 913 } 914 915 /* 916 * il3945_rx_queue_restock - refill RX queue from pre-allocated pool 917 * 918 * If there are slots in the RX queue that need to be restocked, 919 * and we have free pre-allocated buffers, fill the ranks as much 920 * as we can, pulling from rx_free. 921 * 922 * This moves the 'write' idx forward to catch up with 'processed', and 923 * also updates the memory address in the firmware to reference the new 924 * target buffer. 925 */ 926 static void 927 il3945_rx_queue_restock(struct il_priv *il) 928 { 929 struct il_rx_queue *rxq = &il->rxq; 930 struct list_head *element; 931 struct il_rx_buf *rxb; 932 unsigned long flags; 933 934 spin_lock_irqsave(&rxq->lock, flags); 935 while (il_rx_queue_space(rxq) > 0 && rxq->free_count) { 936 /* Get next free Rx buffer, remove from free list */ 937 element = rxq->rx_free.next; 938 rxb = list_entry(element, struct il_rx_buf, list); 939 list_del(element); 940 941 /* Point to Rx buffer via next RBD in circular buffer */ 942 rxq->bd[rxq->write] = 943 il3945_dma_addr2rbd_ptr(il, rxb->page_dma); 944 rxq->queue[rxq->write] = rxb; 945 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; 946 rxq->free_count--; 947 } 948 spin_unlock_irqrestore(&rxq->lock, flags); 949 /* If the pre-allocated buffer pool is dropping low, schedule to 950 * refill it */ 951 if (rxq->free_count <= RX_LOW_WATERMARK) 952 queue_work(il->workqueue, &il->rx_replenish); 953 954 /* If we've added more space for the firmware to place data, tell it. 955 * Increment device's write pointer in multiples of 8. */ 956 if (rxq->write_actual != (rxq->write & ~0x7) || 957 abs(rxq->write - rxq->read) > 7) { 958 spin_lock_irqsave(&rxq->lock, flags); 959 rxq->need_update = 1; 960 spin_unlock_irqrestore(&rxq->lock, flags); 961 il_rx_queue_update_write_ptr(il, rxq); 962 } 963 } 964 965 /* 966 * il3945_rx_replenish - Move all used packet from rx_used to rx_free 967 * 968 * When moving to rx_free an SKB is allocated for the slot. 969 * 970 * Also restock the Rx queue via il3945_rx_queue_restock. 971 * This is called as a scheduled work item (except for during initialization) 972 */ 973 static void 974 il3945_rx_allocate(struct il_priv *il, gfp_t priority) 975 { 976 struct il_rx_queue *rxq = &il->rxq; 977 struct list_head *element; 978 struct il_rx_buf *rxb; 979 struct page *page; 980 dma_addr_t page_dma; 981 unsigned long flags; 982 gfp_t gfp_mask = priority; 983 984 while (1) { 985 spin_lock_irqsave(&rxq->lock, flags); 986 if (list_empty(&rxq->rx_used)) { 987 spin_unlock_irqrestore(&rxq->lock, flags); 988 return; 989 } 990 spin_unlock_irqrestore(&rxq->lock, flags); 991 992 if (rxq->free_count > RX_LOW_WATERMARK) 993 gfp_mask |= __GFP_NOWARN; 994 995 if (il->hw_params.rx_page_order > 0) 996 gfp_mask |= __GFP_COMP; 997 998 /* Alloc a new receive buffer */ 999 page = alloc_pages(gfp_mask, il->hw_params.rx_page_order); 1000 if (!page) { 1001 if (net_ratelimit()) 1002 D_INFO("Failed to allocate SKB buffer.\n"); 1003 if (rxq->free_count <= RX_LOW_WATERMARK && 1004 net_ratelimit()) 1005 IL_ERR("Failed to allocate SKB buffer with %0x." 1006 "Only %u free buffers remaining.\n", 1007 priority, rxq->free_count); 1008 /* We don't reschedule replenish work here -- we will 1009 * call the restock method and if it still needs 1010 * more buffers it will schedule replenish */ 1011 break; 1012 } 1013 1014 /* Get physical address of RB/SKB */ 1015 page_dma = 1016 dma_map_page(&il->pci_dev->dev, page, 0, 1017 PAGE_SIZE << il->hw_params.rx_page_order, 1018 DMA_FROM_DEVICE); 1019 1020 if (unlikely(dma_mapping_error(&il->pci_dev->dev, page_dma))) { 1021 __free_pages(page, il->hw_params.rx_page_order); 1022 break; 1023 } 1024 1025 spin_lock_irqsave(&rxq->lock, flags); 1026 1027 if (list_empty(&rxq->rx_used)) { 1028 spin_unlock_irqrestore(&rxq->lock, flags); 1029 dma_unmap_page(&il->pci_dev->dev, page_dma, 1030 PAGE_SIZE << il->hw_params.rx_page_order, 1031 DMA_FROM_DEVICE); 1032 __free_pages(page, il->hw_params.rx_page_order); 1033 return; 1034 } 1035 1036 element = rxq->rx_used.next; 1037 rxb = list_entry(element, struct il_rx_buf, list); 1038 list_del(element); 1039 1040 rxb->page = page; 1041 rxb->page_dma = page_dma; 1042 list_add_tail(&rxb->list, &rxq->rx_free); 1043 rxq->free_count++; 1044 il->alloc_rxb_page++; 1045 1046 spin_unlock_irqrestore(&rxq->lock, flags); 1047 } 1048 } 1049 1050 void 1051 il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq) 1052 { 1053 unsigned long flags; 1054 int i; 1055 spin_lock_irqsave(&rxq->lock, flags); 1056 INIT_LIST_HEAD(&rxq->rx_free); 1057 INIT_LIST_HEAD(&rxq->rx_used); 1058 /* Fill the rx_used queue with _all_ of the Rx buffers */ 1059 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { 1060 /* In the reset function, these buffers may have been allocated 1061 * to an SKB, so we need to unmap and free potential storage */ 1062 if (rxq->pool[i].page != NULL) { 1063 dma_unmap_page(&il->pci_dev->dev, 1064 rxq->pool[i].page_dma, 1065 PAGE_SIZE << il->hw_params.rx_page_order, 1066 DMA_FROM_DEVICE); 1067 __il_free_pages(il, rxq->pool[i].page); 1068 rxq->pool[i].page = NULL; 1069 } 1070 list_add_tail(&rxq->pool[i].list, &rxq->rx_used); 1071 } 1072 1073 /* Set us so that we have processed and used all buffers, but have 1074 * not restocked the Rx queue with fresh buffers */ 1075 rxq->read = rxq->write = 0; 1076 rxq->write_actual = 0; 1077 rxq->free_count = 0; 1078 spin_unlock_irqrestore(&rxq->lock, flags); 1079 } 1080 1081 void 1082 il3945_rx_replenish(void *data) 1083 { 1084 struct il_priv *il = data; 1085 unsigned long flags; 1086 1087 il3945_rx_allocate(il, GFP_KERNEL); 1088 1089 spin_lock_irqsave(&il->lock, flags); 1090 il3945_rx_queue_restock(il); 1091 spin_unlock_irqrestore(&il->lock, flags); 1092 } 1093 1094 static void 1095 il3945_rx_replenish_now(struct il_priv *il) 1096 { 1097 il3945_rx_allocate(il, GFP_ATOMIC); 1098 1099 il3945_rx_queue_restock(il); 1100 } 1101 1102 /* Assumes that the skb field of the buffers in 'pool' is kept accurate. 1103 * If an SKB has been detached, the POOL needs to have its SKB set to NULL 1104 * This free routine walks the list of POOL entries and if SKB is set to 1105 * non NULL it is unmapped and freed 1106 */ 1107 static void 1108 il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq) 1109 { 1110 int i; 1111 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { 1112 if (rxq->pool[i].page != NULL) { 1113 dma_unmap_page(&il->pci_dev->dev, 1114 rxq->pool[i].page_dma, 1115 PAGE_SIZE << il->hw_params.rx_page_order, 1116 DMA_FROM_DEVICE); 1117 __il_free_pages(il, rxq->pool[i].page); 1118 rxq->pool[i].page = NULL; 1119 } 1120 } 1121 1122 dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, 1123 rxq->bd_dma); 1124 dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status), 1125 rxq->rb_stts, rxq->rb_stts_dma); 1126 rxq->bd = NULL; 1127 rxq->rb_stts = NULL; 1128 } 1129 1130 /* Convert linear signal-to-noise ratio into dB */ 1131 static u8 ratio2dB[100] = { 1132 /* 0 1 2 3 4 5 6 7 8 9 */ 1133 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */ 1134 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */ 1135 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */ 1136 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */ 1137 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */ 1138 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */ 1139 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */ 1140 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */ 1141 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */ 1142 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */ 1143 }; 1144 1145 /* Calculates a relative dB value from a ratio of linear 1146 * (i.e. not dB) signal levels. 1147 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */ 1148 int 1149 il3945_calc_db_from_ratio(int sig_ratio) 1150 { 1151 /* 1000:1 or higher just report as 60 dB */ 1152 if (sig_ratio >= 1000) 1153 return 60; 1154 1155 /* 100:1 or higher, divide by 10 and use table, 1156 * add 20 dB to make up for divide by 10 */ 1157 if (sig_ratio >= 100) 1158 return 20 + (int)ratio2dB[sig_ratio / 10]; 1159 1160 /* We shouldn't see this */ 1161 if (sig_ratio < 1) 1162 return 0; 1163 1164 /* Use table for ratios 1:1 - 99:1 */ 1165 return (int)ratio2dB[sig_ratio]; 1166 } 1167 1168 /* 1169 * il3945_rx_handle - Main entry function for receiving responses from uCode 1170 * 1171 * Uses the il->handlers callback function array to invoke 1172 * the appropriate handlers, including command responses, 1173 * frame-received notifications, and other notifications. 1174 */ 1175 static void 1176 il3945_rx_handle(struct il_priv *il) 1177 { 1178 struct il_rx_buf *rxb; 1179 struct il_rx_pkt *pkt; 1180 struct il_rx_queue *rxq = &il->rxq; 1181 u32 r, i; 1182 int reclaim; 1183 unsigned long flags; 1184 u8 fill_rx = 0; 1185 u32 count = 8; 1186 int total_empty = 0; 1187 1188 /* uCode's read idx (stored in shared DRAM) indicates the last Rx 1189 * buffer that the driver may process (last buffer filled by ucode). */ 1190 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; 1191 i = rxq->read; 1192 1193 /* calculate total frames need to be restock after handling RX */ 1194 total_empty = r - rxq->write_actual; 1195 if (total_empty < 0) 1196 total_empty += RX_QUEUE_SIZE; 1197 1198 if (total_empty > (RX_QUEUE_SIZE / 2)) 1199 fill_rx = 1; 1200 /* Rx interrupt, but nothing sent from uCode */ 1201 if (i == r) 1202 D_RX("r = %d, i = %d\n", r, i); 1203 1204 while (i != r) { 1205 int len; 1206 1207 rxb = rxq->queue[i]; 1208 1209 /* If an RXB doesn't have a Rx queue slot associated with it, 1210 * then a bug has been introduced in the queue refilling 1211 * routines -- catch it here */ 1212 BUG_ON(rxb == NULL); 1213 1214 rxq->queue[i] = NULL; 1215 1216 dma_unmap_page(&il->pci_dev->dev, rxb->page_dma, 1217 PAGE_SIZE << il->hw_params.rx_page_order, 1218 DMA_FROM_DEVICE); 1219 pkt = rxb_addr(rxb); 1220 1221 len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK; 1222 len += sizeof(u32); /* account for status word */ 1223 1224 reclaim = il_need_reclaim(il, pkt); 1225 1226 /* Based on type of command response or notification, 1227 * handle those that need handling via function in 1228 * handlers table. See il3945_setup_handlers() */ 1229 if (il->handlers[pkt->hdr.cmd]) { 1230 D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i, 1231 il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); 1232 il->isr_stats.handlers[pkt->hdr.cmd]++; 1233 il->handlers[pkt->hdr.cmd] (il, rxb); 1234 } else { 1235 /* No handling needed */ 1236 D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r, 1237 i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); 1238 } 1239 1240 /* 1241 * XXX: After here, we should always check rxb->page 1242 * against NULL before touching it or its virtual 1243 * memory (pkt). Because some handler might have 1244 * already taken or freed the pages. 1245 */ 1246 1247 if (reclaim) { 1248 /* Invoke any callbacks, transfer the buffer to caller, 1249 * and fire off the (possibly) blocking il_send_cmd() 1250 * as we reclaim the driver command queue */ 1251 if (rxb->page) 1252 il_tx_cmd_complete(il, rxb); 1253 else 1254 IL_WARN("Claim null rxb?\n"); 1255 } 1256 1257 /* Reuse the page if possible. For notification packets and 1258 * SKBs that fail to Rx correctly, add them back into the 1259 * rx_free list for reuse later. */ 1260 spin_lock_irqsave(&rxq->lock, flags); 1261 if (rxb->page != NULL) { 1262 rxb->page_dma = 1263 dma_map_page(&il->pci_dev->dev, rxb->page, 0, 1264 PAGE_SIZE << il->hw_params.rx_page_order, 1265 DMA_FROM_DEVICE); 1266 if (unlikely(dma_mapping_error(&il->pci_dev->dev, 1267 rxb->page_dma))) { 1268 __il_free_pages(il, rxb->page); 1269 rxb->page = NULL; 1270 list_add_tail(&rxb->list, &rxq->rx_used); 1271 } else { 1272 list_add_tail(&rxb->list, &rxq->rx_free); 1273 rxq->free_count++; 1274 } 1275 } else 1276 list_add_tail(&rxb->list, &rxq->rx_used); 1277 1278 spin_unlock_irqrestore(&rxq->lock, flags); 1279 1280 i = (i + 1) & RX_QUEUE_MASK; 1281 /* If there are a lot of unused frames, 1282 * restock the Rx queue so ucode won't assert. */ 1283 if (fill_rx) { 1284 count++; 1285 if (count >= 8) { 1286 rxq->read = i; 1287 il3945_rx_replenish_now(il); 1288 count = 0; 1289 } 1290 } 1291 } 1292 1293 /* Backtrack one entry */ 1294 rxq->read = i; 1295 if (fill_rx) 1296 il3945_rx_replenish_now(il); 1297 else 1298 il3945_rx_queue_restock(il); 1299 } 1300 1301 /* call this function to flush any scheduled tasklet */ 1302 static inline void 1303 il3945_synchronize_irq(struct il_priv *il) 1304 { 1305 /* wait to make sure we flush pending tasklet */ 1306 synchronize_irq(il->pci_dev->irq); 1307 tasklet_kill(&il->irq_tasklet); 1308 } 1309 1310 static const char * 1311 il3945_desc_lookup(int i) 1312 { 1313 switch (i) { 1314 case 1: 1315 return "FAIL"; 1316 case 2: 1317 return "BAD_PARAM"; 1318 case 3: 1319 return "BAD_CHECKSUM"; 1320 case 4: 1321 return "NMI_INTERRUPT"; 1322 case 5: 1323 return "SYSASSERT"; 1324 case 6: 1325 return "FATAL_ERROR"; 1326 } 1327 1328 return "UNKNOWN"; 1329 } 1330 1331 #define ERROR_START_OFFSET (1 * sizeof(u32)) 1332 #define ERROR_ELEM_SIZE (7 * sizeof(u32)) 1333 1334 void 1335 il3945_dump_nic_error_log(struct il_priv *il) 1336 { 1337 u32 i; 1338 u32 desc, time, count, base, data1; 1339 u32 blink1, blink2, ilink1, ilink2; 1340 1341 base = le32_to_cpu(il->card_alive.error_event_table_ptr); 1342 1343 if (!il3945_hw_valid_rtc_data_addr(base)) { 1344 IL_ERR("Not valid error log pointer 0x%08X\n", base); 1345 return; 1346 } 1347 1348 count = il_read_targ_mem(il, base); 1349 1350 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { 1351 IL_ERR("Start IWL Error Log Dump:\n"); 1352 IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count); 1353 } 1354 1355 IL_ERR("Desc Time asrtPC blink2 " 1356 "ilink1 nmiPC Line\n"); 1357 for (i = ERROR_START_OFFSET; 1358 i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET; 1359 i += ERROR_ELEM_SIZE) { 1360 desc = il_read_targ_mem(il, base + i); 1361 time = il_read_targ_mem(il, base + i + 1 * sizeof(u32)); 1362 blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32)); 1363 blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32)); 1364 ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32)); 1365 ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32)); 1366 data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32)); 1367 1368 IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n", 1369 il3945_desc_lookup(desc), desc, time, blink1, blink2, 1370 ilink1, ilink2, data1); 1371 } 1372 } 1373 1374 static void 1375 il3945_irq_tasklet(struct tasklet_struct *t) 1376 { 1377 struct il_priv *il = from_tasklet(il, t, irq_tasklet); 1378 u32 inta, handled = 0; 1379 u32 inta_fh; 1380 unsigned long flags; 1381 #ifdef CONFIG_IWLEGACY_DEBUG 1382 u32 inta_mask; 1383 #endif 1384 1385 spin_lock_irqsave(&il->lock, flags); 1386 1387 /* Ack/clear/reset pending uCode interrupts. 1388 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, 1389 * and will clear only when CSR_FH_INT_STATUS gets cleared. */ 1390 inta = _il_rd(il, CSR_INT); 1391 _il_wr(il, CSR_INT, inta); 1392 1393 /* Ack/clear/reset pending flow-handler (DMA) interrupts. 1394 * Any new interrupts that happen after this, either while we're 1395 * in this tasklet, or later, will show up in next ISR/tasklet. */ 1396 inta_fh = _il_rd(il, CSR_FH_INT_STATUS); 1397 _il_wr(il, CSR_FH_INT_STATUS, inta_fh); 1398 1399 #ifdef CONFIG_IWLEGACY_DEBUG 1400 if (il_get_debug_level(il) & IL_DL_ISR) { 1401 /* just for debug */ 1402 inta_mask = _il_rd(il, CSR_INT_MASK); 1403 D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, 1404 inta_mask, inta_fh); 1405 } 1406 #endif 1407 1408 spin_unlock_irqrestore(&il->lock, flags); 1409 1410 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not 1411 * atomic, make sure that inta covers all the interrupts that 1412 * we've discovered, even if FH interrupt came in just after 1413 * reading CSR_INT. */ 1414 if (inta_fh & CSR39_FH_INT_RX_MASK) 1415 inta |= CSR_INT_BIT_FH_RX; 1416 if (inta_fh & CSR39_FH_INT_TX_MASK) 1417 inta |= CSR_INT_BIT_FH_TX; 1418 1419 /* Now service all interrupt bits discovered above. */ 1420 if (inta & CSR_INT_BIT_HW_ERR) { 1421 IL_ERR("Hardware error detected. Restarting.\n"); 1422 1423 /* Tell the device to stop sending interrupts */ 1424 il_disable_interrupts(il); 1425 1426 il->isr_stats.hw++; 1427 il_irq_handle_error(il); 1428 1429 handled |= CSR_INT_BIT_HW_ERR; 1430 1431 return; 1432 } 1433 #ifdef CONFIG_IWLEGACY_DEBUG 1434 if (il_get_debug_level(il) & (IL_DL_ISR)) { 1435 /* NIC fires this, but we don't use it, redundant with WAKEUP */ 1436 if (inta & CSR_INT_BIT_SCD) { 1437 D_ISR("Scheduler finished to transmit " 1438 "the frame/frames.\n"); 1439 il->isr_stats.sch++; 1440 } 1441 1442 /* Alive notification via Rx interrupt will do the real work */ 1443 if (inta & CSR_INT_BIT_ALIVE) { 1444 D_ISR("Alive interrupt\n"); 1445 il->isr_stats.alive++; 1446 } 1447 } 1448 #endif 1449 /* Safely ignore these bits for debug checks below */ 1450 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); 1451 1452 /* Error detected by uCode */ 1453 if (inta & CSR_INT_BIT_SW_ERR) { 1454 IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n", 1455 inta); 1456 il->isr_stats.sw++; 1457 il_irq_handle_error(il); 1458 handled |= CSR_INT_BIT_SW_ERR; 1459 } 1460 1461 /* uCode wakes up after power-down sleep */ 1462 if (inta & CSR_INT_BIT_WAKEUP) { 1463 D_ISR("Wakeup interrupt\n"); 1464 il_rx_queue_update_write_ptr(il, &il->rxq); 1465 1466 spin_lock_irqsave(&il->lock, flags); 1467 il_txq_update_write_ptr(il, &il->txq[0]); 1468 il_txq_update_write_ptr(il, &il->txq[1]); 1469 il_txq_update_write_ptr(il, &il->txq[2]); 1470 il_txq_update_write_ptr(il, &il->txq[3]); 1471 il_txq_update_write_ptr(il, &il->txq[4]); 1472 spin_unlock_irqrestore(&il->lock, flags); 1473 1474 il->isr_stats.wakeup++; 1475 handled |= CSR_INT_BIT_WAKEUP; 1476 } 1477 1478 /* All uCode command responses, including Tx command responses, 1479 * Rx "responses" (frame-received notification), and other 1480 * notifications from uCode come through here*/ 1481 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { 1482 il3945_rx_handle(il); 1483 il->isr_stats.rx++; 1484 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); 1485 } 1486 1487 if (inta & CSR_INT_BIT_FH_TX) { 1488 D_ISR("Tx interrupt\n"); 1489 il->isr_stats.tx++; 1490 1491 _il_wr(il, CSR_FH_INT_STATUS, (1 << 6)); 1492 il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0); 1493 handled |= CSR_INT_BIT_FH_TX; 1494 } 1495 1496 if (inta & ~handled) { 1497 IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled); 1498 il->isr_stats.unhandled++; 1499 } 1500 1501 if (inta & ~il->inta_mask) { 1502 IL_WARN("Disabled INTA bits 0x%08x were pending\n", 1503 inta & ~il->inta_mask); 1504 IL_WARN(" with inta_fh = 0x%08x\n", inta_fh); 1505 } 1506 1507 /* Re-enable all interrupts */ 1508 /* only Re-enable if disabled by irq */ 1509 if (test_bit(S_INT_ENABLED, &il->status)) 1510 il_enable_interrupts(il); 1511 1512 #ifdef CONFIG_IWLEGACY_DEBUG 1513 if (il_get_debug_level(il) & (IL_DL_ISR)) { 1514 inta = _il_rd(il, CSR_INT); 1515 inta_mask = _il_rd(il, CSR_INT_MASK); 1516 inta_fh = _il_rd(il, CSR_FH_INT_STATUS); 1517 D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " 1518 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); 1519 } 1520 #endif 1521 } 1522 1523 static int 1524 il3945_get_channels_for_scan(struct il_priv *il, enum nl80211_band band, 1525 u8 is_active, u8 n_probes, 1526 struct il3945_scan_channel *scan_ch, 1527 struct ieee80211_vif *vif) 1528 { 1529 struct ieee80211_channel *chan; 1530 const struct ieee80211_supported_band *sband; 1531 const struct il_channel_info *ch_info; 1532 u16 passive_dwell = 0; 1533 u16 active_dwell = 0; 1534 int added, i; 1535 1536 sband = il_get_hw_mode(il, band); 1537 if (!sband) 1538 return 0; 1539 1540 active_dwell = il_get_active_dwell_time(il, band, n_probes); 1541 passive_dwell = il_get_passive_dwell_time(il, band, vif); 1542 1543 if (passive_dwell <= active_dwell) 1544 passive_dwell = active_dwell + 1; 1545 1546 for (i = 0, added = 0; i < il->scan_request->n_channels; i++) { 1547 chan = il->scan_request->channels[i]; 1548 1549 if (chan->band != band) 1550 continue; 1551 1552 scan_ch->channel = chan->hw_value; 1553 1554 ch_info = il_get_channel_info(il, band, scan_ch->channel); 1555 if (!il_is_channel_valid(ch_info)) { 1556 D_SCAN("Channel %d is INVALID for this band.\n", 1557 scan_ch->channel); 1558 continue; 1559 } 1560 1561 scan_ch->active_dwell = cpu_to_le16(active_dwell); 1562 scan_ch->passive_dwell = cpu_to_le16(passive_dwell); 1563 /* If passive , set up for auto-switch 1564 * and use long active_dwell time. 1565 */ 1566 if (!is_active || il_is_channel_passive(ch_info) || 1567 (chan->flags & IEEE80211_CHAN_NO_IR)) { 1568 scan_ch->type = 0; /* passive */ 1569 if (IL_UCODE_API(il->ucode_ver) == 1) 1570 scan_ch->active_dwell = 1571 cpu_to_le16(passive_dwell - 1); 1572 } else { 1573 scan_ch->type = 1; /* active */ 1574 } 1575 1576 /* Set direct probe bits. These may be used both for active 1577 * scan channels (probes gets sent right away), 1578 * or for passive channels (probes get se sent only after 1579 * hearing clear Rx packet).*/ 1580 if (IL_UCODE_API(il->ucode_ver) >= 2) { 1581 if (n_probes) 1582 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes); 1583 } else { 1584 /* uCode v1 does not allow setting direct probe bits on 1585 * passive channel. */ 1586 if ((scan_ch->type & 1) && n_probes) 1587 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes); 1588 } 1589 1590 /* Set txpower levels to defaults */ 1591 scan_ch->tpc.dsp_atten = 110; 1592 /* scan_pwr_info->tpc.dsp_atten; */ 1593 1594 /*scan_pwr_info->tpc.tx_gain; */ 1595 if (band == NL80211_BAND_5GHZ) 1596 scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; 1597 else { 1598 scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); 1599 /* NOTE: if we were doing 6Mb OFDM for scans we'd use 1600 * power level: 1601 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3; 1602 */ 1603 } 1604 1605 D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel, 1606 (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE", 1607 (scan_ch->type & 1) ? active_dwell : passive_dwell); 1608 1609 scan_ch++; 1610 added++; 1611 } 1612 1613 D_SCAN("total channels to scan %d\n", added); 1614 return added; 1615 } 1616 1617 static void 1618 il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates) 1619 { 1620 int i; 1621 1622 for (i = 0; i < RATE_COUNT_LEGACY; i++) { 1623 rates[i].bitrate = il3945_rates[i].ieee * 5; 1624 rates[i].hw_value = i; /* Rate scaling will work on idxes */ 1625 rates[i].hw_value_short = i; 1626 rates[i].flags = 0; 1627 if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) { 1628 /* 1629 * If CCK != 1M then set short preamble rate flag. 1630 */ 1631 rates[i].flags |= 1632 (il3945_rates[i].plcp == 1633 10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE; 1634 } 1635 } 1636 } 1637 1638 /****************************************************************************** 1639 * 1640 * uCode download functions 1641 * 1642 ******************************************************************************/ 1643 1644 static void 1645 il3945_dealloc_ucode_pci(struct il_priv *il) 1646 { 1647 il_free_fw_desc(il->pci_dev, &il->ucode_code); 1648 il_free_fw_desc(il->pci_dev, &il->ucode_data); 1649 il_free_fw_desc(il->pci_dev, &il->ucode_data_backup); 1650 il_free_fw_desc(il->pci_dev, &il->ucode_init); 1651 il_free_fw_desc(il->pci_dev, &il->ucode_init_data); 1652 il_free_fw_desc(il->pci_dev, &il->ucode_boot); 1653 } 1654 1655 /* 1656 * il3945_verify_inst_full - verify runtime uCode image in card vs. host, 1657 * looking at all data. 1658 */ 1659 static int 1660 il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len) 1661 { 1662 u32 val; 1663 u32 save_len = len; 1664 int rc = 0; 1665 u32 errcnt; 1666 1667 D_INFO("ucode inst image size is %u\n", len); 1668 1669 il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND); 1670 1671 errcnt = 0; 1672 for (; len > 0; len -= sizeof(u32), image++) { 1673 /* read data comes through single port, auto-incr addr */ 1674 /* NOTE: Use the debugless read so we don't flood kernel log 1675 * if IL_DL_IO is set */ 1676 val = _il_rd(il, HBUS_TARG_MEM_RDAT); 1677 if (val != le32_to_cpu(*image)) { 1678 IL_ERR("uCode INST section is invalid at " 1679 "offset 0x%x, is 0x%x, s/b 0x%x\n", 1680 save_len - len, val, le32_to_cpu(*image)); 1681 rc = -EIO; 1682 errcnt++; 1683 if (errcnt >= 20) 1684 break; 1685 } 1686 } 1687 1688 if (!errcnt) 1689 D_INFO("ucode image in INSTRUCTION memory is good\n"); 1690 1691 return rc; 1692 } 1693 1694 /* 1695 * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host, 1696 * using sample data 100 bytes apart. If these sample points are good, 1697 * it's a pretty good bet that everything between them is good, too. 1698 */ 1699 static int 1700 il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len) 1701 { 1702 u32 val; 1703 int rc = 0; 1704 u32 errcnt = 0; 1705 u32 i; 1706 1707 D_INFO("ucode inst image size is %u\n", len); 1708 1709 for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) { 1710 /* read data comes through single port, auto-incr addr */ 1711 /* NOTE: Use the debugless read so we don't flood kernel log 1712 * if IL_DL_IO is set */ 1713 il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND); 1714 val = _il_rd(il, HBUS_TARG_MEM_RDAT); 1715 if (val != le32_to_cpu(*image)) { 1716 #if 0 /* Enable this if you want to see details */ 1717 IL_ERR("uCode INST section is invalid at " 1718 "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val, 1719 *image); 1720 #endif 1721 rc = -EIO; 1722 errcnt++; 1723 if (errcnt >= 3) 1724 break; 1725 } 1726 } 1727 1728 return rc; 1729 } 1730 1731 /* 1732 * il3945_verify_ucode - determine which instruction image is in SRAM, 1733 * and verify its contents 1734 */ 1735 static int 1736 il3945_verify_ucode(struct il_priv *il) 1737 { 1738 __le32 *image; 1739 u32 len; 1740 int rc = 0; 1741 1742 /* Try bootstrap */ 1743 image = (__le32 *) il->ucode_boot.v_addr; 1744 len = il->ucode_boot.len; 1745 rc = il3945_verify_inst_sparse(il, image, len); 1746 if (rc == 0) { 1747 D_INFO("Bootstrap uCode is good in inst SRAM\n"); 1748 return 0; 1749 } 1750 1751 /* Try initialize */ 1752 image = (__le32 *) il->ucode_init.v_addr; 1753 len = il->ucode_init.len; 1754 rc = il3945_verify_inst_sparse(il, image, len); 1755 if (rc == 0) { 1756 D_INFO("Initialize uCode is good in inst SRAM\n"); 1757 return 0; 1758 } 1759 1760 /* Try runtime/protocol */ 1761 image = (__le32 *) il->ucode_code.v_addr; 1762 len = il->ucode_code.len; 1763 rc = il3945_verify_inst_sparse(il, image, len); 1764 if (rc == 0) { 1765 D_INFO("Runtime uCode is good in inst SRAM\n"); 1766 return 0; 1767 } 1768 1769 IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); 1770 1771 /* Since nothing seems to match, show first several data entries in 1772 * instruction SRAM, so maybe visual inspection will give a clue. 1773 * Selection of bootstrap image (vs. other images) is arbitrary. */ 1774 image = (__le32 *) il->ucode_boot.v_addr; 1775 len = il->ucode_boot.len; 1776 rc = il3945_verify_inst_full(il, image, len); 1777 1778 return rc; 1779 } 1780 1781 static void 1782 il3945_nic_start(struct il_priv *il) 1783 { 1784 /* Remove all resets to allow NIC to operate */ 1785 _il_wr(il, CSR_RESET, 0); 1786 } 1787 1788 #define IL3945_UCODE_GET(item) \ 1789 static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\ 1790 { \ 1791 return le32_to_cpu(ucode->v1.item); \ 1792 } 1793 1794 static u32 1795 il3945_ucode_get_header_size(u32 api_ver) 1796 { 1797 return 24; 1798 } 1799 1800 static u8 * 1801 il3945_ucode_get_data(const struct il_ucode_header *ucode) 1802 { 1803 return (u8 *) ucode->v1.data; 1804 } 1805 1806 IL3945_UCODE_GET(inst_size); 1807 IL3945_UCODE_GET(data_size); 1808 IL3945_UCODE_GET(init_size); 1809 IL3945_UCODE_GET(init_data_size); 1810 IL3945_UCODE_GET(boot_size); 1811 1812 /* 1813 * il3945_read_ucode - Read uCode images from disk file. 1814 * 1815 * Copy into buffers for card to fetch via bus-mastering 1816 */ 1817 static int 1818 il3945_read_ucode(struct il_priv *il) 1819 { 1820 const struct il_ucode_header *ucode; 1821 int ret = -EINVAL, idx; 1822 const struct firmware *ucode_raw; 1823 /* firmware file name contains uCode/driver compatibility version */ 1824 const char *name_pre = il->cfg->fw_name_pre; 1825 const unsigned int api_max = il->cfg->ucode_api_max; 1826 const unsigned int api_min = il->cfg->ucode_api_min; 1827 char buf[25]; 1828 u8 *src; 1829 size_t len; 1830 u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size; 1831 1832 /* Ask kernel firmware_class module to get the boot firmware off disk. 1833 * request_firmware() is synchronous, file is in memory on return. */ 1834 for (idx = api_max; idx >= api_min; idx--) { 1835 sprintf(buf, "%s%u%s", name_pre, idx, ".ucode"); 1836 ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev); 1837 if (ret < 0) { 1838 IL_ERR("%s firmware file req failed: %d\n", buf, ret); 1839 if (ret == -ENOENT) 1840 continue; 1841 else 1842 goto error; 1843 } else { 1844 if (idx < api_max) 1845 IL_ERR("Loaded firmware %s, " 1846 "which is deprecated. " 1847 " Please use API v%u instead.\n", buf, 1848 api_max); 1849 D_INFO("Got firmware '%s' file " 1850 "(%zd bytes) from disk\n", buf, ucode_raw->size); 1851 break; 1852 } 1853 } 1854 1855 if (ret < 0) 1856 goto error; 1857 1858 /* Make sure that we got at least our header! */ 1859 if (ucode_raw->size < il3945_ucode_get_header_size(1)) { 1860 IL_ERR("File size way too small!\n"); 1861 ret = -EINVAL; 1862 goto err_release; 1863 } 1864 1865 /* Data from ucode file: header followed by uCode images */ 1866 ucode = (struct il_ucode_header *)ucode_raw->data; 1867 1868 il->ucode_ver = le32_to_cpu(ucode->ver); 1869 api_ver = IL_UCODE_API(il->ucode_ver); 1870 inst_size = il3945_ucode_get_inst_size(ucode); 1871 data_size = il3945_ucode_get_data_size(ucode); 1872 init_size = il3945_ucode_get_init_size(ucode); 1873 init_data_size = il3945_ucode_get_init_data_size(ucode); 1874 boot_size = il3945_ucode_get_boot_size(ucode); 1875 src = il3945_ucode_get_data(ucode); 1876 1877 /* api_ver should match the api version forming part of the 1878 * firmware filename ... but we don't check for that and only rely 1879 * on the API version read from firmware header from here on forward */ 1880 1881 if (api_ver < api_min || api_ver > api_max) { 1882 IL_ERR("Driver unable to support your firmware API. " 1883 "Driver supports v%u, firmware is v%u.\n", api_max, 1884 api_ver); 1885 il->ucode_ver = 0; 1886 ret = -EINVAL; 1887 goto err_release; 1888 } 1889 if (api_ver != api_max) 1890 IL_ERR("Firmware has old API version. Expected %u, " 1891 "got %u. New firmware can be obtained " 1892 "from http://www.intellinuxwireless.org.\n", api_max, 1893 api_ver); 1894 1895 IL_INFO("loaded firmware version %u.%u.%u.%u\n", 1896 IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver), 1897 IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver)); 1898 1899 snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version), 1900 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver), 1901 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver), 1902 IL_UCODE_SERIAL(il->ucode_ver)); 1903 1904 D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver); 1905 D_INFO("f/w package hdr runtime inst size = %u\n", inst_size); 1906 D_INFO("f/w package hdr runtime data size = %u\n", data_size); 1907 D_INFO("f/w package hdr init inst size = %u\n", init_size); 1908 D_INFO("f/w package hdr init data size = %u\n", init_data_size); 1909 D_INFO("f/w package hdr boot inst size = %u\n", boot_size); 1910 1911 /* Verify size of file vs. image size info in file's header */ 1912 if (ucode_raw->size != 1913 il3945_ucode_get_header_size(api_ver) + inst_size + data_size + 1914 init_size + init_data_size + boot_size) { 1915 1916 D_INFO("uCode file size %zd does not match expected size\n", 1917 ucode_raw->size); 1918 ret = -EINVAL; 1919 goto err_release; 1920 } 1921 1922 /* Verify that uCode images will fit in card's SRAM */ 1923 if (inst_size > IL39_MAX_INST_SIZE) { 1924 D_INFO("uCode instr len %d too large to fit in\n", inst_size); 1925 ret = -EINVAL; 1926 goto err_release; 1927 } 1928 1929 if (data_size > IL39_MAX_DATA_SIZE) { 1930 D_INFO("uCode data len %d too large to fit in\n", data_size); 1931 ret = -EINVAL; 1932 goto err_release; 1933 } 1934 if (init_size > IL39_MAX_INST_SIZE) { 1935 D_INFO("uCode init instr len %d too large to fit in\n", 1936 init_size); 1937 ret = -EINVAL; 1938 goto err_release; 1939 } 1940 if (init_data_size > IL39_MAX_DATA_SIZE) { 1941 D_INFO("uCode init data len %d too large to fit in\n", 1942 init_data_size); 1943 ret = -EINVAL; 1944 goto err_release; 1945 } 1946 if (boot_size > IL39_MAX_BSM_SIZE) { 1947 D_INFO("uCode boot instr len %d too large to fit in\n", 1948 boot_size); 1949 ret = -EINVAL; 1950 goto err_release; 1951 } 1952 1953 /* Allocate ucode buffers for card's bus-master loading ... */ 1954 1955 /* Runtime instructions and 2 copies of data: 1956 * 1) unmodified from disk 1957 * 2) backup cache for save/restore during power-downs */ 1958 il->ucode_code.len = inst_size; 1959 il_alloc_fw_desc(il->pci_dev, &il->ucode_code); 1960 1961 il->ucode_data.len = data_size; 1962 il_alloc_fw_desc(il->pci_dev, &il->ucode_data); 1963 1964 il->ucode_data_backup.len = data_size; 1965 il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup); 1966 1967 if (!il->ucode_code.v_addr || !il->ucode_data.v_addr || 1968 !il->ucode_data_backup.v_addr) 1969 goto err_pci_alloc; 1970 1971 /* Initialization instructions and data */ 1972 if (init_size && init_data_size) { 1973 il->ucode_init.len = init_size; 1974 il_alloc_fw_desc(il->pci_dev, &il->ucode_init); 1975 1976 il->ucode_init_data.len = init_data_size; 1977 il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data); 1978 1979 if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr) 1980 goto err_pci_alloc; 1981 } 1982 1983 /* Bootstrap (instructions only, no data) */ 1984 if (boot_size) { 1985 il->ucode_boot.len = boot_size; 1986 il_alloc_fw_desc(il->pci_dev, &il->ucode_boot); 1987 1988 if (!il->ucode_boot.v_addr) 1989 goto err_pci_alloc; 1990 } 1991 1992 /* Copy images into buffers for card's bus-master reads ... */ 1993 1994 /* Runtime instructions (first block of data in file) */ 1995 len = inst_size; 1996 D_INFO("Copying (but not loading) uCode instr len %zd\n", len); 1997 memcpy(il->ucode_code.v_addr, src, len); 1998 src += len; 1999 2000 D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", 2001 il->ucode_code.v_addr, (u32) il->ucode_code.p_addr); 2002 2003 /* Runtime data (2nd block) 2004 * NOTE: Copy into backup buffer will be done in il3945_up() */ 2005 len = data_size; 2006 D_INFO("Copying (but not loading) uCode data len %zd\n", len); 2007 memcpy(il->ucode_data.v_addr, src, len); 2008 memcpy(il->ucode_data_backup.v_addr, src, len); 2009 src += len; 2010 2011 /* Initialization instructions (3rd block) */ 2012 if (init_size) { 2013 len = init_size; 2014 D_INFO("Copying (but not loading) init instr len %zd\n", len); 2015 memcpy(il->ucode_init.v_addr, src, len); 2016 src += len; 2017 } 2018 2019 /* Initialization data (4th block) */ 2020 if (init_data_size) { 2021 len = init_data_size; 2022 D_INFO("Copying (but not loading) init data len %zd\n", len); 2023 memcpy(il->ucode_init_data.v_addr, src, len); 2024 src += len; 2025 } 2026 2027 /* Bootstrap instructions (5th block) */ 2028 len = boot_size; 2029 D_INFO("Copying (but not loading) boot instr len %zd\n", len); 2030 memcpy(il->ucode_boot.v_addr, src, len); 2031 2032 /* We have our copies now, allow OS release its copies */ 2033 release_firmware(ucode_raw); 2034 return 0; 2035 2036 err_pci_alloc: 2037 IL_ERR("failed to allocate pci memory\n"); 2038 ret = -ENOMEM; 2039 il3945_dealloc_ucode_pci(il); 2040 2041 err_release: 2042 release_firmware(ucode_raw); 2043 2044 error: 2045 return ret; 2046 } 2047 2048 /* 2049 * il3945_set_ucode_ptrs - Set uCode address location 2050 * 2051 * Tell initialization uCode where to find runtime uCode. 2052 * 2053 * BSM registers initially contain pointers to initialization uCode. 2054 * We need to replace them to load runtime uCode inst and data, 2055 * and to save runtime data when powering down. 2056 */ 2057 static int 2058 il3945_set_ucode_ptrs(struct il_priv *il) 2059 { 2060 dma_addr_t pinst; 2061 dma_addr_t pdata; 2062 2063 /* bits 31:0 for 3945 */ 2064 pinst = il->ucode_code.p_addr; 2065 pdata = il->ucode_data_backup.p_addr; 2066 2067 /* Tell bootstrap uCode where to find image to load */ 2068 il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst); 2069 il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata); 2070 il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len); 2071 2072 /* Inst byte count must be last to set up, bit 31 signals uCode 2073 * that all new ptr/size info is in place */ 2074 il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, 2075 il->ucode_code.len | BSM_DRAM_INST_LOAD); 2076 2077 D_INFO("Runtime uCode pointers are set.\n"); 2078 2079 return 0; 2080 } 2081 2082 /* 2083 * il3945_init_alive_start - Called after N_ALIVE notification received 2084 * 2085 * Called after N_ALIVE notification received from "initialize" uCode. 2086 * 2087 * Tell "initialize" uCode to go ahead and load the runtime uCode. 2088 */ 2089 static void 2090 il3945_init_alive_start(struct il_priv *il) 2091 { 2092 /* Check alive response for "valid" sign from uCode */ 2093 if (il->card_alive_init.is_valid != UCODE_VALID_OK) { 2094 /* We had an error bringing up the hardware, so take it 2095 * all the way back down so we can try again */ 2096 D_INFO("Initialize Alive failed.\n"); 2097 goto restart; 2098 } 2099 2100 /* Bootstrap uCode has loaded initialize uCode ... verify inst image. 2101 * This is a paranoid check, because we would not have gotten the 2102 * "initialize" alive if code weren't properly loaded. */ 2103 if (il3945_verify_ucode(il)) { 2104 /* Runtime instruction load was bad; 2105 * take it all the way back down so we can try again */ 2106 D_INFO("Bad \"initialize\" uCode load.\n"); 2107 goto restart; 2108 } 2109 2110 /* Send pointers to protocol/runtime uCode image ... init code will 2111 * load and launch runtime uCode, which will send us another "Alive" 2112 * notification. */ 2113 D_INFO("Initialization Alive received.\n"); 2114 if (il3945_set_ucode_ptrs(il)) { 2115 /* Runtime instruction load won't happen; 2116 * take it all the way back down so we can try again */ 2117 D_INFO("Couldn't set up uCode pointers.\n"); 2118 goto restart; 2119 } 2120 return; 2121 2122 restart: 2123 queue_work(il->workqueue, &il->restart); 2124 } 2125 2126 /* 2127 * il3945_alive_start - called after N_ALIVE notification received 2128 * from protocol/runtime uCode (initialization uCode's 2129 * Alive gets handled by il3945_init_alive_start()). 2130 */ 2131 static void 2132 il3945_alive_start(struct il_priv *il) 2133 { 2134 int thermal_spin = 0; 2135 u32 rfkill; 2136 2137 D_INFO("Runtime Alive received.\n"); 2138 2139 if (il->card_alive.is_valid != UCODE_VALID_OK) { 2140 /* We had an error bringing up the hardware, so take it 2141 * all the way back down so we can try again */ 2142 D_INFO("Alive failed.\n"); 2143 goto restart; 2144 } 2145 2146 /* Initialize uCode has loaded Runtime uCode ... verify inst image. 2147 * This is a paranoid check, because we would not have gotten the 2148 * "runtime" alive if code weren't properly loaded. */ 2149 if (il3945_verify_ucode(il)) { 2150 /* Runtime instruction load was bad; 2151 * take it all the way back down so we can try again */ 2152 D_INFO("Bad runtime uCode load.\n"); 2153 goto restart; 2154 } 2155 2156 rfkill = il_rd_prph(il, APMG_RFKILL_REG); 2157 D_INFO("RFKILL status: 0x%x\n", rfkill); 2158 2159 if (rfkill & 0x1) { 2160 clear_bit(S_RFKILL, &il->status); 2161 /* if RFKILL is not on, then wait for thermal 2162 * sensor in adapter to kick in */ 2163 while (il3945_hw_get_temperature(il) == 0) { 2164 thermal_spin++; 2165 udelay(10); 2166 } 2167 2168 if (thermal_spin) 2169 D_INFO("Thermal calibration took %dus\n", 2170 thermal_spin * 10); 2171 } else 2172 set_bit(S_RFKILL, &il->status); 2173 2174 /* After the ALIVE response, we can send commands to 3945 uCode */ 2175 set_bit(S_ALIVE, &il->status); 2176 2177 /* Enable watchdog to monitor the driver tx queues */ 2178 il_setup_watchdog(il); 2179 2180 if (il_is_rfkill(il)) 2181 return; 2182 2183 ieee80211_wake_queues(il->hw); 2184 2185 il->active_rate = RATES_MASK_3945; 2186 2187 il_power_update_mode(il, true); 2188 2189 if (il_is_associated(il)) { 2190 struct il3945_rxon_cmd *active_rxon = 2191 (struct il3945_rxon_cmd *)(&il->active); 2192 2193 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; 2194 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; 2195 } else { 2196 /* Initialize our rx_config data */ 2197 il_connection_init_rx_config(il); 2198 } 2199 2200 /* Configure Bluetooth device coexistence support */ 2201 il_send_bt_config(il); 2202 2203 set_bit(S_READY, &il->status); 2204 2205 /* Configure the adapter for unassociated operation */ 2206 il3945_commit_rxon(il); 2207 2208 il3945_reg_txpower_periodic(il); 2209 2210 D_INFO("ALIVE processing complete.\n"); 2211 wake_up(&il->wait_command_queue); 2212 2213 return; 2214 2215 restart: 2216 queue_work(il->workqueue, &il->restart); 2217 } 2218 2219 static void il3945_cancel_deferred_work(struct il_priv *il); 2220 2221 static void 2222 __il3945_down(struct il_priv *il) 2223 { 2224 unsigned long flags; 2225 int exit_pending; 2226 2227 D_INFO(DRV_NAME " is going down\n"); 2228 2229 il_scan_cancel_timeout(il, 200); 2230 2231 exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status); 2232 2233 /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set 2234 * to prevent rearm timer */ 2235 del_timer_sync(&il->watchdog); 2236 2237 /* Station information will now be cleared in device */ 2238 il_clear_ucode_stations(il); 2239 il_dealloc_bcast_stations(il); 2240 il_clear_driver_stations(il); 2241 2242 /* Unblock any waiting calls */ 2243 wake_up_all(&il->wait_command_queue); 2244 2245 /* Wipe out the EXIT_PENDING status bit if we are not actually 2246 * exiting the module */ 2247 if (!exit_pending) 2248 clear_bit(S_EXIT_PENDING, &il->status); 2249 2250 /* stop and reset the on-board processor */ 2251 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); 2252 2253 /* tell the device to stop sending interrupts */ 2254 spin_lock_irqsave(&il->lock, flags); 2255 il_disable_interrupts(il); 2256 spin_unlock_irqrestore(&il->lock, flags); 2257 il3945_synchronize_irq(il); 2258 2259 if (il->mac80211_registered) 2260 ieee80211_stop_queues(il->hw); 2261 2262 /* If we have not previously called il3945_init() then 2263 * clear all bits but the RF Kill bits and return */ 2264 if (!il_is_init(il)) { 2265 il->status = 2266 test_bit(S_RFKILL, &il->status) << S_RFKILL | 2267 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | 2268 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; 2269 goto exit; 2270 } 2271 2272 /* ...otherwise clear out all the status bits but the RF Kill 2273 * bit and continue taking the NIC down. */ 2274 il->status &= 2275 test_bit(S_RFKILL, &il->status) << S_RFKILL | 2276 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | 2277 test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR | 2278 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; 2279 2280 /* 2281 * We disabled and synchronized interrupt, and priv->mutex is taken, so 2282 * here is the only thread which will program device registers, but 2283 * still have lockdep assertions, so we are taking reg_lock. 2284 */ 2285 spin_lock_irq(&il->reg_lock); 2286 /* FIXME: il_grab_nic_access if rfkill is off ? */ 2287 2288 il3945_hw_txq_ctx_stop(il); 2289 il3945_hw_rxq_stop(il); 2290 /* Power-down device's busmaster DMA clocks */ 2291 _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); 2292 udelay(5); 2293 /* Stop the device, and put it in low power state */ 2294 _il_apm_stop(il); 2295 2296 spin_unlock_irq(&il->reg_lock); 2297 2298 il3945_hw_txq_ctx_free(il); 2299 exit: 2300 memset(&il->card_alive, 0, sizeof(struct il_alive_resp)); 2301 dev_kfree_skb(il->beacon_skb); 2302 il->beacon_skb = NULL; 2303 2304 /* clear out any free frames */ 2305 il3945_clear_free_frames(il); 2306 } 2307 2308 static void 2309 il3945_down(struct il_priv *il) 2310 { 2311 mutex_lock(&il->mutex); 2312 __il3945_down(il); 2313 mutex_unlock(&il->mutex); 2314 2315 il3945_cancel_deferred_work(il); 2316 } 2317 2318 #define MAX_HW_RESTARTS 5 2319 2320 static int 2321 il3945_alloc_bcast_station(struct il_priv *il) 2322 { 2323 unsigned long flags; 2324 u8 sta_id; 2325 2326 spin_lock_irqsave(&il->sta_lock, flags); 2327 sta_id = il_prep_station(il, il_bcast_addr, false, NULL); 2328 if (sta_id == IL_INVALID_STATION) { 2329 IL_ERR("Unable to prepare broadcast station\n"); 2330 spin_unlock_irqrestore(&il->sta_lock, flags); 2331 2332 return -EINVAL; 2333 } 2334 2335 il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE; 2336 il->stations[sta_id].used |= IL_STA_BCAST; 2337 spin_unlock_irqrestore(&il->sta_lock, flags); 2338 2339 return 0; 2340 } 2341 2342 static int 2343 __il3945_up(struct il_priv *il) 2344 { 2345 int rc, i; 2346 2347 rc = il3945_alloc_bcast_station(il); 2348 if (rc) 2349 return rc; 2350 2351 if (test_bit(S_EXIT_PENDING, &il->status)) { 2352 IL_WARN("Exit pending; will not bring the NIC up\n"); 2353 return -EIO; 2354 } 2355 2356 if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) { 2357 IL_ERR("ucode not available for device bring up\n"); 2358 return -EIO; 2359 } 2360 2361 /* If platform's RF_KILL switch is NOT set to KILL */ 2362 if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) 2363 clear_bit(S_RFKILL, &il->status); 2364 else { 2365 set_bit(S_RFKILL, &il->status); 2366 return -ERFKILL; 2367 } 2368 2369 _il_wr(il, CSR_INT, 0xFFFFFFFF); 2370 2371 rc = il3945_hw_nic_init(il); 2372 if (rc) { 2373 IL_ERR("Unable to int nic\n"); 2374 return rc; 2375 } 2376 2377 /* make sure rfkill handshake bits are cleared */ 2378 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 2379 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 2380 2381 /* clear (again), then enable host interrupts */ 2382 _il_wr(il, CSR_INT, 0xFFFFFFFF); 2383 il_enable_interrupts(il); 2384 2385 /* really make sure rfkill handshake bits are cleared */ 2386 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 2387 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 2388 2389 /* Copy original ucode data image from disk into backup cache. 2390 * This will be used to initialize the on-board processor's 2391 * data SRAM for a clean start when the runtime program first loads. */ 2392 memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr, 2393 il->ucode_data.len); 2394 2395 /* We return success when we resume from suspend and rf_kill is on. */ 2396 if (test_bit(S_RFKILL, &il->status)) 2397 return 0; 2398 2399 for (i = 0; i < MAX_HW_RESTARTS; i++) { 2400 2401 /* load bootstrap state machine, 2402 * load bootstrap program into processor's memory, 2403 * prepare to load the "initialize" uCode */ 2404 rc = il->ops->load_ucode(il); 2405 2406 if (rc) { 2407 IL_ERR("Unable to set up bootstrap uCode: %d\n", rc); 2408 continue; 2409 } 2410 2411 /* start card; "initialize" will load runtime ucode */ 2412 il3945_nic_start(il); 2413 2414 D_INFO(DRV_NAME " is coming up\n"); 2415 2416 return 0; 2417 } 2418 2419 set_bit(S_EXIT_PENDING, &il->status); 2420 __il3945_down(il); 2421 clear_bit(S_EXIT_PENDING, &il->status); 2422 2423 /* tried to restart and config the device for as long as our 2424 * patience could withstand */ 2425 IL_ERR("Unable to initialize device after %d attempts.\n", i); 2426 return -EIO; 2427 } 2428 2429 /***************************************************************************** 2430 * 2431 * Workqueue callbacks 2432 * 2433 *****************************************************************************/ 2434 2435 static void 2436 il3945_bg_init_alive_start(struct work_struct *data) 2437 { 2438 struct il_priv *il = 2439 container_of(data, struct il_priv, init_alive_start.work); 2440 2441 mutex_lock(&il->mutex); 2442 if (test_bit(S_EXIT_PENDING, &il->status)) 2443 goto out; 2444 2445 il3945_init_alive_start(il); 2446 out: 2447 mutex_unlock(&il->mutex); 2448 } 2449 2450 static void 2451 il3945_bg_alive_start(struct work_struct *data) 2452 { 2453 struct il_priv *il = 2454 container_of(data, struct il_priv, alive_start.work); 2455 2456 mutex_lock(&il->mutex); 2457 if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL) 2458 goto out; 2459 2460 il3945_alive_start(il); 2461 out: 2462 mutex_unlock(&il->mutex); 2463 } 2464 2465 /* 2466 * 3945 cannot interrupt driver when hardware rf kill switch toggles; 2467 * driver must poll CSR_GP_CNTRL_REG register for change. This register 2468 * *is* readable even when device has been SW_RESET into low power mode 2469 * (e.g. during RF KILL). 2470 */ 2471 static void 2472 il3945_rfkill_poll(struct work_struct *data) 2473 { 2474 struct il_priv *il = 2475 container_of(data, struct il_priv, _3945.rfkill_poll.work); 2476 bool old_rfkill = test_bit(S_RFKILL, &il->status); 2477 bool new_rfkill = 2478 !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); 2479 2480 if (new_rfkill != old_rfkill) { 2481 if (new_rfkill) 2482 set_bit(S_RFKILL, &il->status); 2483 else 2484 clear_bit(S_RFKILL, &il->status); 2485 2486 wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill); 2487 2488 D_RF_KILL("RF_KILL bit toggled to %s.\n", 2489 new_rfkill ? "disable radio" : "enable radio"); 2490 } 2491 2492 /* Keep this running, even if radio now enabled. This will be 2493 * cancelled in mac_start() if system decides to start again */ 2494 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2495 round_jiffies_relative(2 * HZ)); 2496 2497 } 2498 2499 int 2500 il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif) 2501 { 2502 struct il_host_cmd cmd = { 2503 .id = C_SCAN, 2504 .len = sizeof(struct il3945_scan_cmd), 2505 .flags = CMD_SIZE_HUGE, 2506 }; 2507 struct il3945_scan_cmd *scan; 2508 u8 n_probes = 0; 2509 enum nl80211_band band; 2510 bool is_active = false; 2511 int ret; 2512 u16 len; 2513 2514 lockdep_assert_held(&il->mutex); 2515 2516 if (!il->scan_cmd) { 2517 il->scan_cmd = 2518 kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE, 2519 GFP_KERNEL); 2520 if (!il->scan_cmd) { 2521 D_SCAN("Fail to allocate scan memory\n"); 2522 return -ENOMEM; 2523 } 2524 } 2525 scan = il->scan_cmd; 2526 memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE); 2527 2528 scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH; 2529 scan->quiet_time = IL_ACTIVE_QUIET_TIME; 2530 2531 if (il_is_associated(il)) { 2532 u16 interval; 2533 u32 extra; 2534 u32 suspend_time = 100; 2535 u32 scan_suspend_time = 100; 2536 2537 D_INFO("Scanning while associated...\n"); 2538 2539 interval = vif->bss_conf.beacon_int; 2540 2541 scan->suspend_time = 0; 2542 scan->max_out_time = cpu_to_le32(200 * 1024); 2543 if (!interval) 2544 interval = suspend_time; 2545 /* 2546 * suspend time format: 2547 * 0-19: beacon interval in usec (time before exec.) 2548 * 20-23: 0 2549 * 24-31: number of beacons (suspend between channels) 2550 */ 2551 2552 extra = (suspend_time / interval) << 24; 2553 scan_suspend_time = 2554 0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024)); 2555 2556 scan->suspend_time = cpu_to_le32(scan_suspend_time); 2557 D_SCAN("suspend_time 0x%X beacon interval %d\n", 2558 scan_suspend_time, interval); 2559 } 2560 2561 if (il->scan_request->n_ssids) { 2562 int i, p = 0; 2563 D_SCAN("Kicking off active scan\n"); 2564 for (i = 0; i < il->scan_request->n_ssids; i++) { 2565 /* always does wildcard anyway */ 2566 if (!il->scan_request->ssids[i].ssid_len) 2567 continue; 2568 scan->direct_scan[p].id = WLAN_EID_SSID; 2569 scan->direct_scan[p].len = 2570 il->scan_request->ssids[i].ssid_len; 2571 memcpy(scan->direct_scan[p].ssid, 2572 il->scan_request->ssids[i].ssid, 2573 il->scan_request->ssids[i].ssid_len); 2574 n_probes++; 2575 p++; 2576 } 2577 is_active = true; 2578 } else 2579 D_SCAN("Kicking off passive scan.\n"); 2580 2581 /* We don't build a direct scan probe request; the uCode will do 2582 * that based on the direct_mask added to each channel entry */ 2583 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; 2584 scan->tx_cmd.sta_id = il->hw_params.bcast_id; 2585 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 2586 2587 /* flags + rate selection */ 2588 2589 switch (il->scan_band) { 2590 case NL80211_BAND_2GHZ: 2591 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; 2592 scan->tx_cmd.rate = RATE_1M_PLCP; 2593 band = NL80211_BAND_2GHZ; 2594 break; 2595 case NL80211_BAND_5GHZ: 2596 scan->tx_cmd.rate = RATE_6M_PLCP; 2597 band = NL80211_BAND_5GHZ; 2598 break; 2599 default: 2600 IL_WARN("Invalid scan band\n"); 2601 return -EIO; 2602 } 2603 2604 /* 2605 * If active scaning is requested but a certain channel is marked 2606 * passive, we can do active scanning if we detect transmissions. For 2607 * passive only scanning disable switching to active on any channel. 2608 */ 2609 scan->good_CRC_th = 2610 is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER; 2611 2612 len = 2613 il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data, 2614 vif->addr, il->scan_request->ie, 2615 il->scan_request->ie_len, 2616 IL_MAX_SCAN_SIZE - sizeof(*scan)); 2617 scan->tx_cmd.len = cpu_to_le16(len); 2618 2619 /* select Rx antennas */ 2620 scan->flags |= il3945_get_antenna_flags(il); 2621 2622 scan->channel_count = 2623 il3945_get_channels_for_scan(il, band, is_active, n_probes, 2624 (void *)&scan->data[len], vif); 2625 if (scan->channel_count == 0) { 2626 D_SCAN("channel count %d\n", scan->channel_count); 2627 return -EIO; 2628 } 2629 2630 cmd.len += 2631 le16_to_cpu(scan->tx_cmd.len) + 2632 scan->channel_count * sizeof(struct il3945_scan_channel); 2633 cmd.data = scan; 2634 scan->len = cpu_to_le16(cmd.len); 2635 2636 set_bit(S_SCAN_HW, &il->status); 2637 ret = il_send_cmd_sync(il, &cmd); 2638 if (ret) 2639 clear_bit(S_SCAN_HW, &il->status); 2640 return ret; 2641 } 2642 2643 void 2644 il3945_post_scan(struct il_priv *il) 2645 { 2646 /* 2647 * Since setting the RXON may have been deferred while 2648 * performing the scan, fire one off if needed 2649 */ 2650 if (memcmp(&il->staging, &il->active, sizeof(il->staging))) 2651 il3945_commit_rxon(il); 2652 } 2653 2654 static void 2655 il3945_bg_restart(struct work_struct *data) 2656 { 2657 struct il_priv *il = container_of(data, struct il_priv, restart); 2658 2659 if (test_bit(S_EXIT_PENDING, &il->status)) 2660 return; 2661 2662 if (test_and_clear_bit(S_FW_ERROR, &il->status)) { 2663 mutex_lock(&il->mutex); 2664 il->is_open = 0; 2665 mutex_unlock(&il->mutex); 2666 il3945_down(il); 2667 ieee80211_restart_hw(il->hw); 2668 } else { 2669 il3945_down(il); 2670 2671 mutex_lock(&il->mutex); 2672 if (test_bit(S_EXIT_PENDING, &il->status)) { 2673 mutex_unlock(&il->mutex); 2674 return; 2675 } 2676 2677 __il3945_up(il); 2678 mutex_unlock(&il->mutex); 2679 } 2680 } 2681 2682 static void 2683 il3945_bg_rx_replenish(struct work_struct *data) 2684 { 2685 struct il_priv *il = container_of(data, struct il_priv, rx_replenish); 2686 2687 mutex_lock(&il->mutex); 2688 if (test_bit(S_EXIT_PENDING, &il->status)) 2689 goto out; 2690 2691 il3945_rx_replenish(il); 2692 out: 2693 mutex_unlock(&il->mutex); 2694 } 2695 2696 void 2697 il3945_post_associate(struct il_priv *il) 2698 { 2699 int rc = 0; 2700 2701 if (!il->vif || !il->is_open) 2702 return; 2703 2704 D_ASSOC("Associated as %d to: %pM\n", il->vif->bss_conf.aid, 2705 il->active.bssid_addr); 2706 2707 if (test_bit(S_EXIT_PENDING, &il->status)) 2708 return; 2709 2710 il_scan_cancel_timeout(il, 200); 2711 2712 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; 2713 il3945_commit_rxon(il); 2714 2715 rc = il_send_rxon_timing(il); 2716 if (rc) 2717 IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n"); 2718 2719 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; 2720 2721 il->staging.assoc_id = cpu_to_le16(il->vif->bss_conf.aid); 2722 2723 D_ASSOC("assoc id %d beacon interval %d\n", il->vif->bss_conf.aid, 2724 il->vif->bss_conf.beacon_int); 2725 2726 if (il->vif->bss_conf.use_short_preamble) 2727 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; 2728 else 2729 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; 2730 2731 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) { 2732 if (il->vif->bss_conf.use_short_slot) 2733 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; 2734 else 2735 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; 2736 } 2737 2738 il3945_commit_rxon(il); 2739 2740 switch (il->vif->type) { 2741 case NL80211_IFTYPE_STATION: 2742 il3945_rate_scale_init(il->hw, IL_AP_ID); 2743 break; 2744 case NL80211_IFTYPE_ADHOC: 2745 il3945_send_beacon_cmd(il); 2746 break; 2747 default: 2748 IL_ERR("%s Should not be called in %d mode\n", __func__, 2749 il->vif->type); 2750 break; 2751 } 2752 } 2753 2754 /***************************************************************************** 2755 * 2756 * mac80211 entry point functions 2757 * 2758 *****************************************************************************/ 2759 2760 #define UCODE_READY_TIMEOUT (2 * HZ) 2761 2762 static int 2763 il3945_mac_start(struct ieee80211_hw *hw) 2764 { 2765 struct il_priv *il = hw->priv; 2766 int ret; 2767 2768 /* we should be verifying the device is ready to be opened */ 2769 mutex_lock(&il->mutex); 2770 D_MAC80211("enter\n"); 2771 2772 /* fetch ucode file from disk, alloc and copy to bus-master buffers ... 2773 * ucode filename and max sizes are card-specific. */ 2774 2775 if (!il->ucode_code.len) { 2776 ret = il3945_read_ucode(il); 2777 if (ret) { 2778 IL_ERR("Could not read microcode: %d\n", ret); 2779 mutex_unlock(&il->mutex); 2780 goto out_release_irq; 2781 } 2782 } 2783 2784 ret = __il3945_up(il); 2785 2786 mutex_unlock(&il->mutex); 2787 2788 if (ret) 2789 goto out_release_irq; 2790 2791 D_INFO("Start UP work.\n"); 2792 2793 /* Wait for START_ALIVE from ucode. Otherwise callbacks from 2794 * mac80211 will not be run successfully. */ 2795 ret = wait_event_timeout(il->wait_command_queue, 2796 test_bit(S_READY, &il->status), 2797 UCODE_READY_TIMEOUT); 2798 if (!ret) { 2799 if (!test_bit(S_READY, &il->status)) { 2800 IL_ERR("Wait for START_ALIVE timeout after %dms.\n", 2801 jiffies_to_msecs(UCODE_READY_TIMEOUT)); 2802 ret = -ETIMEDOUT; 2803 goto out_release_irq; 2804 } 2805 } 2806 2807 /* ucode is running and will send rfkill notifications, 2808 * no need to poll the killswitch state anymore */ 2809 cancel_delayed_work(&il->_3945.rfkill_poll); 2810 2811 il->is_open = 1; 2812 D_MAC80211("leave\n"); 2813 return 0; 2814 2815 out_release_irq: 2816 il->is_open = 0; 2817 D_MAC80211("leave - failed\n"); 2818 return ret; 2819 } 2820 2821 static void 2822 il3945_mac_stop(struct ieee80211_hw *hw) 2823 { 2824 struct il_priv *il = hw->priv; 2825 2826 D_MAC80211("enter\n"); 2827 2828 if (!il->is_open) { 2829 D_MAC80211("leave - skip\n"); 2830 return; 2831 } 2832 2833 il->is_open = 0; 2834 2835 il3945_down(il); 2836 2837 flush_workqueue(il->workqueue); 2838 2839 /* start polling the killswitch state again */ 2840 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2841 round_jiffies_relative(2 * HZ)); 2842 2843 D_MAC80211("leave\n"); 2844 } 2845 2846 static void 2847 il3945_mac_tx(struct ieee80211_hw *hw, 2848 struct ieee80211_tx_control *control, 2849 struct sk_buff *skb) 2850 { 2851 struct il_priv *il = hw->priv; 2852 2853 D_MAC80211("enter\n"); 2854 2855 D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, 2856 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); 2857 2858 if (il3945_tx_skb(il, control->sta, skb)) 2859 dev_kfree_skb_any(skb); 2860 2861 D_MAC80211("leave\n"); 2862 } 2863 2864 void 2865 il3945_config_ap(struct il_priv *il) 2866 { 2867 struct ieee80211_vif *vif = il->vif; 2868 int rc = 0; 2869 2870 if (test_bit(S_EXIT_PENDING, &il->status)) 2871 return; 2872 2873 /* The following should be done only at AP bring up */ 2874 if (!(il_is_associated(il))) { 2875 2876 /* RXON - unassoc (to set timing command) */ 2877 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; 2878 il3945_commit_rxon(il); 2879 2880 /* RXON Timing */ 2881 rc = il_send_rxon_timing(il); 2882 if (rc) 2883 IL_WARN("C_RXON_TIMING failed - " 2884 "Attempting to continue.\n"); 2885 2886 il->staging.assoc_id = 0; 2887 2888 if (vif->bss_conf.use_short_preamble) 2889 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; 2890 else 2891 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; 2892 2893 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) { 2894 if (vif->bss_conf.use_short_slot) 2895 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; 2896 else 2897 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; 2898 } 2899 /* restore RXON assoc */ 2900 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; 2901 il3945_commit_rxon(il); 2902 } 2903 il3945_send_beacon_cmd(il); 2904 } 2905 2906 static int 2907 il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, 2908 struct ieee80211_vif *vif, struct ieee80211_sta *sta, 2909 struct ieee80211_key_conf *key) 2910 { 2911 struct il_priv *il = hw->priv; 2912 int ret = 0; 2913 u8 sta_id = IL_INVALID_STATION; 2914 u8 static_key; 2915 2916 D_MAC80211("enter\n"); 2917 2918 if (il3945_mod_params.sw_crypto) { 2919 D_MAC80211("leave - hwcrypto disabled\n"); 2920 return -EOPNOTSUPP; 2921 } 2922 2923 /* 2924 * To support IBSS RSN, don't program group keys in IBSS, the 2925 * hardware will then not attempt to decrypt the frames. 2926 */ 2927 if (vif->type == NL80211_IFTYPE_ADHOC && 2928 !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { 2929 D_MAC80211("leave - IBSS RSN\n"); 2930 return -EOPNOTSUPP; 2931 } 2932 2933 static_key = !il_is_associated(il); 2934 2935 if (!static_key) { 2936 sta_id = il_sta_id_or_broadcast(il, sta); 2937 if (sta_id == IL_INVALID_STATION) { 2938 D_MAC80211("leave - station not found\n"); 2939 return -EINVAL; 2940 } 2941 } 2942 2943 mutex_lock(&il->mutex); 2944 il_scan_cancel_timeout(il, 100); 2945 2946 switch (cmd) { 2947 case SET_KEY: 2948 if (static_key) 2949 ret = il3945_set_static_key(il, key); 2950 else 2951 ret = il3945_set_dynamic_key(il, key, sta_id); 2952 D_MAC80211("enable hwcrypto key\n"); 2953 break; 2954 case DISABLE_KEY: 2955 if (static_key) 2956 ret = il3945_remove_static_key(il); 2957 else 2958 ret = il3945_clear_sta_key_info(il, sta_id); 2959 D_MAC80211("disable hwcrypto key\n"); 2960 break; 2961 default: 2962 ret = -EINVAL; 2963 } 2964 2965 D_MAC80211("leave ret %d\n", ret); 2966 mutex_unlock(&il->mutex); 2967 2968 return ret; 2969 } 2970 2971 static int 2972 il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 2973 struct ieee80211_sta *sta) 2974 { 2975 struct il_priv *il = hw->priv; 2976 struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv; 2977 int ret; 2978 bool is_ap = vif->type == NL80211_IFTYPE_STATION; 2979 u8 sta_id; 2980 2981 mutex_lock(&il->mutex); 2982 D_INFO("station %pM\n", sta->addr); 2983 sta_priv->common.sta_id = IL_INVALID_STATION; 2984 2985 ret = il_add_station_common(il, sta->addr, is_ap, sta, &sta_id); 2986 if (ret) { 2987 IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret); 2988 /* Should we return success if return code is EEXIST ? */ 2989 mutex_unlock(&il->mutex); 2990 return ret; 2991 } 2992 2993 sta_priv->common.sta_id = sta_id; 2994 2995 /* Initialize rate scaling */ 2996 D_INFO("Initializing rate scaling for station %pM\n", sta->addr); 2997 il3945_rs_rate_init(il, sta, sta_id); 2998 mutex_unlock(&il->mutex); 2999 3000 return 0; 3001 } 3002 3003 static void 3004 il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, 3005 unsigned int *total_flags, u64 multicast) 3006 { 3007 struct il_priv *il = hw->priv; 3008 __le32 filter_or = 0, filter_nand = 0; 3009 3010 #define CHK(test, flag) do { \ 3011 if (*total_flags & (test)) \ 3012 filter_or |= (flag); \ 3013 else \ 3014 filter_nand |= (flag); \ 3015 } while (0) 3016 3017 D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags, 3018 *total_flags); 3019 3020 CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK); 3021 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK); 3022 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); 3023 3024 #undef CHK 3025 3026 mutex_lock(&il->mutex); 3027 3028 il->staging.filter_flags &= ~filter_nand; 3029 il->staging.filter_flags |= filter_or; 3030 3031 /* 3032 * Not committing directly because hardware can perform a scan, 3033 * but even if hw is ready, committing here breaks for some reason, 3034 * we'll eventually commit the filter flags change anyway. 3035 */ 3036 3037 mutex_unlock(&il->mutex); 3038 3039 /* 3040 * Receiving all multicast frames is always enabled by the 3041 * default flags setup in il_connection_init_rx_config() 3042 * since we currently do not support programming multicast 3043 * filters into the device. 3044 */ 3045 *total_flags &= 3046 FIF_OTHER_BSS | FIF_ALLMULTI | 3047 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; 3048 } 3049 3050 /***************************************************************************** 3051 * 3052 * sysfs attributes 3053 * 3054 *****************************************************************************/ 3055 3056 #ifdef CONFIG_IWLEGACY_DEBUG 3057 3058 /* 3059 * The following adds a new attribute to the sysfs representation 3060 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) 3061 * used for controlling the debug level. 3062 * 3063 * See the level definitions in iwl for details. 3064 * 3065 * The debug_level being managed using sysfs below is a per device debug 3066 * level that is used instead of the global debug level if it (the per 3067 * device debug level) is set. 3068 */ 3069 static ssize_t 3070 il3945_show_debug_level(struct device *d, struct device_attribute *attr, 3071 char *buf) 3072 { 3073 struct il_priv *il = dev_get_drvdata(d); 3074 return sprintf(buf, "0x%08X\n", il_get_debug_level(il)); 3075 } 3076 3077 static ssize_t 3078 il3945_store_debug_level(struct device *d, struct device_attribute *attr, 3079 const char *buf, size_t count) 3080 { 3081 struct il_priv *il = dev_get_drvdata(d); 3082 unsigned long val; 3083 int ret; 3084 3085 ret = kstrtoul(buf, 0, &val); 3086 if (ret) 3087 IL_INFO("%s is not in hex or decimal form.\n", buf); 3088 else 3089 il->debug_level = val; 3090 3091 return strnlen(buf, count); 3092 } 3093 3094 static DEVICE_ATTR(debug_level, 0644, il3945_show_debug_level, 3095 il3945_store_debug_level); 3096 3097 #endif /* CONFIG_IWLEGACY_DEBUG */ 3098 3099 static ssize_t 3100 il3945_show_temperature(struct device *d, struct device_attribute *attr, 3101 char *buf) 3102 { 3103 struct il_priv *il = dev_get_drvdata(d); 3104 3105 if (!il_is_alive(il)) 3106 return -EAGAIN; 3107 3108 return sprintf(buf, "%d\n", il3945_hw_get_temperature(il)); 3109 } 3110 3111 static DEVICE_ATTR(temperature, 0444, il3945_show_temperature, NULL); 3112 3113 static ssize_t 3114 il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf) 3115 { 3116 struct il_priv *il = dev_get_drvdata(d); 3117 return sprintf(buf, "%d\n", il->tx_power_user_lmt); 3118 } 3119 3120 static ssize_t 3121 il3945_store_tx_power(struct device *d, struct device_attribute *attr, 3122 const char *buf, size_t count) 3123 { 3124 struct il_priv *il = dev_get_drvdata(d); 3125 char *p = (char *)buf; 3126 u32 val; 3127 3128 val = simple_strtoul(p, &p, 10); 3129 if (p == buf) 3130 IL_INFO(": %s is not in decimal form.\n", buf); 3131 else 3132 il3945_hw_reg_set_txpower(il, val); 3133 3134 return count; 3135 } 3136 3137 static DEVICE_ATTR(tx_power, 0644, il3945_show_tx_power, il3945_store_tx_power); 3138 3139 static ssize_t 3140 il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf) 3141 { 3142 struct il_priv *il = dev_get_drvdata(d); 3143 3144 return sprintf(buf, "0x%04X\n", il->active.flags); 3145 } 3146 3147 static ssize_t 3148 il3945_store_flags(struct device *d, struct device_attribute *attr, 3149 const char *buf, size_t count) 3150 { 3151 struct il_priv *il = dev_get_drvdata(d); 3152 u32 flags = simple_strtoul(buf, NULL, 0); 3153 3154 mutex_lock(&il->mutex); 3155 if (le32_to_cpu(il->staging.flags) != flags) { 3156 /* Cancel any currently running scans... */ 3157 if (il_scan_cancel_timeout(il, 100)) 3158 IL_WARN("Could not cancel scan.\n"); 3159 else { 3160 D_INFO("Committing rxon.flags = 0x%04X\n", flags); 3161 il->staging.flags = cpu_to_le32(flags); 3162 il3945_commit_rxon(il); 3163 } 3164 } 3165 mutex_unlock(&il->mutex); 3166 3167 return count; 3168 } 3169 3170 static DEVICE_ATTR(flags, 0644, il3945_show_flags, il3945_store_flags); 3171 3172 static ssize_t 3173 il3945_show_filter_flags(struct device *d, struct device_attribute *attr, 3174 char *buf) 3175 { 3176 struct il_priv *il = dev_get_drvdata(d); 3177 3178 return sprintf(buf, "0x%04X\n", le32_to_cpu(il->active.filter_flags)); 3179 } 3180 3181 static ssize_t 3182 il3945_store_filter_flags(struct device *d, struct device_attribute *attr, 3183 const char *buf, size_t count) 3184 { 3185 struct il_priv *il = dev_get_drvdata(d); 3186 u32 filter_flags = simple_strtoul(buf, NULL, 0); 3187 3188 mutex_lock(&il->mutex); 3189 if (le32_to_cpu(il->staging.filter_flags) != filter_flags) { 3190 /* Cancel any currently running scans... */ 3191 if (il_scan_cancel_timeout(il, 100)) 3192 IL_WARN("Could not cancel scan.\n"); 3193 else { 3194 D_INFO("Committing rxon.filter_flags = " "0x%04X\n", 3195 filter_flags); 3196 il->staging.filter_flags = cpu_to_le32(filter_flags); 3197 il3945_commit_rxon(il); 3198 } 3199 } 3200 mutex_unlock(&il->mutex); 3201 3202 return count; 3203 } 3204 3205 static DEVICE_ATTR(filter_flags, 0644, il3945_show_filter_flags, 3206 il3945_store_filter_flags); 3207 3208 static ssize_t 3209 il3945_show_measurement(struct device *d, struct device_attribute *attr, 3210 char *buf) 3211 { 3212 struct il_priv *il = dev_get_drvdata(d); 3213 struct il_spectrum_notification measure_report; 3214 u32 size = sizeof(measure_report), len = 0, ofs = 0; 3215 u8 *data = (u8 *) &measure_report; 3216 unsigned long flags; 3217 3218 spin_lock_irqsave(&il->lock, flags); 3219 if (!(il->measurement_status & MEASUREMENT_READY)) { 3220 spin_unlock_irqrestore(&il->lock, flags); 3221 return 0; 3222 } 3223 memcpy(&measure_report, &il->measure_report, size); 3224 il->measurement_status = 0; 3225 spin_unlock_irqrestore(&il->lock, flags); 3226 3227 while (size && PAGE_SIZE - len) { 3228 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, 3229 PAGE_SIZE - len, true); 3230 len = strlen(buf); 3231 if (PAGE_SIZE - len) 3232 buf[len++] = '\n'; 3233 3234 ofs += 16; 3235 size -= min(size, 16U); 3236 } 3237 3238 return len; 3239 } 3240 3241 static ssize_t 3242 il3945_store_measurement(struct device *d, struct device_attribute *attr, 3243 const char *buf, size_t count) 3244 { 3245 struct il_priv *il = dev_get_drvdata(d); 3246 struct ieee80211_measurement_params params = { 3247 .channel = le16_to_cpu(il->active.channel), 3248 .start_time = cpu_to_le64(il->_3945.last_tsf), 3249 .duration = cpu_to_le16(1), 3250 }; 3251 u8 type = IL_MEASURE_BASIC; 3252 u8 buffer[32]; 3253 u8 channel; 3254 3255 if (count) { 3256 char *p = buffer; 3257 strlcpy(buffer, buf, sizeof(buffer)); 3258 channel = simple_strtoul(p, NULL, 0); 3259 if (channel) 3260 params.channel = channel; 3261 3262 p = buffer; 3263 while (*p && *p != ' ') 3264 p++; 3265 if (*p) 3266 type = simple_strtoul(p + 1, NULL, 0); 3267 } 3268 3269 D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n", 3270 type, params.channel, buf); 3271 il3945_get_measurement(il, ¶ms, type); 3272 3273 return count; 3274 } 3275 3276 static DEVICE_ATTR(measurement, 0600, il3945_show_measurement, 3277 il3945_store_measurement); 3278 3279 static ssize_t 3280 il3945_store_retry_rate(struct device *d, struct device_attribute *attr, 3281 const char *buf, size_t count) 3282 { 3283 struct il_priv *il = dev_get_drvdata(d); 3284 3285 il->retry_rate = simple_strtoul(buf, NULL, 0); 3286 if (il->retry_rate <= 0) 3287 il->retry_rate = 1; 3288 3289 return count; 3290 } 3291 3292 static ssize_t 3293 il3945_show_retry_rate(struct device *d, struct device_attribute *attr, 3294 char *buf) 3295 { 3296 struct il_priv *il = dev_get_drvdata(d); 3297 return sprintf(buf, "%d", il->retry_rate); 3298 } 3299 3300 static DEVICE_ATTR(retry_rate, 0600, il3945_show_retry_rate, 3301 il3945_store_retry_rate); 3302 3303 static ssize_t 3304 il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf) 3305 { 3306 /* all this shit doesn't belong into sysfs anyway */ 3307 return 0; 3308 } 3309 3310 static DEVICE_ATTR(channels, 0400, il3945_show_channels, NULL); 3311 3312 static ssize_t 3313 il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf) 3314 { 3315 struct il_priv *il = dev_get_drvdata(d); 3316 3317 if (!il_is_alive(il)) 3318 return -EAGAIN; 3319 3320 return sprintf(buf, "%d\n", il3945_mod_params.antenna); 3321 } 3322 3323 static ssize_t 3324 il3945_store_antenna(struct device *d, struct device_attribute *attr, 3325 const char *buf, size_t count) 3326 { 3327 struct il_priv *il __maybe_unused = dev_get_drvdata(d); 3328 int ant; 3329 3330 if (count == 0) 3331 return 0; 3332 3333 if (sscanf(buf, "%1i", &ant) != 1) { 3334 D_INFO("not in hex or decimal form.\n"); 3335 return count; 3336 } 3337 3338 if (ant >= 0 && ant <= 2) { 3339 D_INFO("Setting antenna select to %d.\n", ant); 3340 il3945_mod_params.antenna = (enum il3945_antenna)ant; 3341 } else 3342 D_INFO("Bad antenna select value %d.\n", ant); 3343 3344 return count; 3345 } 3346 3347 static DEVICE_ATTR(antenna, 0644, il3945_show_antenna, il3945_store_antenna); 3348 3349 static ssize_t 3350 il3945_show_status(struct device *d, struct device_attribute *attr, char *buf) 3351 { 3352 struct il_priv *il = dev_get_drvdata(d); 3353 if (!il_is_alive(il)) 3354 return -EAGAIN; 3355 return sprintf(buf, "0x%08x\n", (int)il->status); 3356 } 3357 3358 static DEVICE_ATTR(status, 0444, il3945_show_status, NULL); 3359 3360 static ssize_t 3361 il3945_dump_error_log(struct device *d, struct device_attribute *attr, 3362 const char *buf, size_t count) 3363 { 3364 struct il_priv *il = dev_get_drvdata(d); 3365 char *p = (char *)buf; 3366 3367 if (p[0] == '1') 3368 il3945_dump_nic_error_log(il); 3369 3370 return strnlen(buf, count); 3371 } 3372 3373 static DEVICE_ATTR(dump_errors, 0200, NULL, il3945_dump_error_log); 3374 3375 /***************************************************************************** 3376 * 3377 * driver setup and tear down 3378 * 3379 *****************************************************************************/ 3380 3381 static void 3382 il3945_setup_deferred_work(struct il_priv *il) 3383 { 3384 il->workqueue = create_singlethread_workqueue(DRV_NAME); 3385 3386 init_waitqueue_head(&il->wait_command_queue); 3387 3388 INIT_WORK(&il->restart, il3945_bg_restart); 3389 INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish); 3390 INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start); 3391 INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start); 3392 INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll); 3393 3394 il_setup_scan_deferred_work(il); 3395 3396 il3945_hw_setup_deferred_work(il); 3397 3398 timer_setup(&il->watchdog, il_bg_watchdog, 0); 3399 3400 tasklet_setup(&il->irq_tasklet, il3945_irq_tasklet); 3401 } 3402 3403 static void 3404 il3945_cancel_deferred_work(struct il_priv *il) 3405 { 3406 il3945_hw_cancel_deferred_work(il); 3407 3408 cancel_delayed_work_sync(&il->init_alive_start); 3409 cancel_delayed_work(&il->alive_start); 3410 3411 il_cancel_scan_deferred_work(il); 3412 } 3413 3414 static struct attribute *il3945_sysfs_entries[] = { 3415 &dev_attr_antenna.attr, 3416 &dev_attr_channels.attr, 3417 &dev_attr_dump_errors.attr, 3418 &dev_attr_flags.attr, 3419 &dev_attr_filter_flags.attr, 3420 &dev_attr_measurement.attr, 3421 &dev_attr_retry_rate.attr, 3422 &dev_attr_status.attr, 3423 &dev_attr_temperature.attr, 3424 &dev_attr_tx_power.attr, 3425 #ifdef CONFIG_IWLEGACY_DEBUG 3426 &dev_attr_debug_level.attr, 3427 #endif 3428 NULL 3429 }; 3430 3431 static const struct attribute_group il3945_attribute_group = { 3432 .name = NULL, /* put in device directory */ 3433 .attrs = il3945_sysfs_entries, 3434 }; 3435 3436 static struct ieee80211_ops il3945_mac_ops __ro_after_init = { 3437 .tx = il3945_mac_tx, 3438 .start = il3945_mac_start, 3439 .stop = il3945_mac_stop, 3440 .add_interface = il_mac_add_interface, 3441 .remove_interface = il_mac_remove_interface, 3442 .change_interface = il_mac_change_interface, 3443 .config = il_mac_config, 3444 .configure_filter = il3945_configure_filter, 3445 .set_key = il3945_mac_set_key, 3446 .conf_tx = il_mac_conf_tx, 3447 .reset_tsf = il_mac_reset_tsf, 3448 .bss_info_changed = il_mac_bss_info_changed, 3449 .hw_scan = il_mac_hw_scan, 3450 .sta_add = il3945_mac_sta_add, 3451 .sta_remove = il_mac_sta_remove, 3452 .tx_last_beacon = il_mac_tx_last_beacon, 3453 .flush = il_mac_flush, 3454 }; 3455 3456 static int 3457 il3945_init_drv(struct il_priv *il) 3458 { 3459 int ret; 3460 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 3461 3462 il->retry_rate = 1; 3463 il->beacon_skb = NULL; 3464 3465 spin_lock_init(&il->sta_lock); 3466 spin_lock_init(&il->hcmd_lock); 3467 3468 INIT_LIST_HEAD(&il->free_frames); 3469 3470 mutex_init(&il->mutex); 3471 3472 il->ieee_channels = NULL; 3473 il->ieee_rates = NULL; 3474 il->band = NL80211_BAND_2GHZ; 3475 3476 il->iw_mode = NL80211_IFTYPE_STATION; 3477 il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF; 3478 3479 /* initialize force reset */ 3480 il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD; 3481 3482 if (eeprom->version < EEPROM_3945_EEPROM_VERSION) { 3483 IL_WARN("Unsupported EEPROM version: 0x%04X\n", 3484 eeprom->version); 3485 ret = -EINVAL; 3486 goto err; 3487 } 3488 ret = il_init_channel_map(il); 3489 if (ret) { 3490 IL_ERR("initializing regulatory failed: %d\n", ret); 3491 goto err; 3492 } 3493 3494 /* Set up txpower settings in driver for all channels */ 3495 if (il3945_txpower_set_from_eeprom(il)) { 3496 ret = -EIO; 3497 goto err_free_channel_map; 3498 } 3499 3500 ret = il_init_geos(il); 3501 if (ret) { 3502 IL_ERR("initializing geos failed: %d\n", ret); 3503 goto err_free_channel_map; 3504 } 3505 il3945_init_hw_rates(il, il->ieee_rates); 3506 3507 return 0; 3508 3509 err_free_channel_map: 3510 il_free_channel_map(il); 3511 err: 3512 return ret; 3513 } 3514 3515 #define IL3945_MAX_PROBE_REQUEST 200 3516 3517 static int 3518 il3945_setup_mac(struct il_priv *il) 3519 { 3520 int ret; 3521 struct ieee80211_hw *hw = il->hw; 3522 3523 hw->rate_control_algorithm = "iwl-3945-rs"; 3524 hw->sta_data_size = sizeof(struct il3945_sta_priv); 3525 hw->vif_data_size = sizeof(struct il_vif_priv); 3526 3527 /* Tell mac80211 our characteristics */ 3528 ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS); 3529 ieee80211_hw_set(hw, SUPPORTS_PS); 3530 ieee80211_hw_set(hw, SIGNAL_DBM); 3531 ieee80211_hw_set(hw, SPECTRUM_MGMT); 3532 3533 hw->wiphy->interface_modes = 3534 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); 3535 3536 hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; 3537 hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | 3538 REGULATORY_DISABLE_BEACON_HINTS; 3539 3540 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; 3541 3542 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945; 3543 /* we create the 802.11 header and a zero-length SSID element */ 3544 hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2; 3545 3546 /* Default value; 4 EDCA QOS priorities */ 3547 hw->queues = 4; 3548 3549 if (il->bands[NL80211_BAND_2GHZ].n_channels) 3550 il->hw->wiphy->bands[NL80211_BAND_2GHZ] = 3551 &il->bands[NL80211_BAND_2GHZ]; 3552 3553 if (il->bands[NL80211_BAND_5GHZ].n_channels) 3554 il->hw->wiphy->bands[NL80211_BAND_5GHZ] = 3555 &il->bands[NL80211_BAND_5GHZ]; 3556 3557 il_leds_init(il); 3558 3559 wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); 3560 3561 ret = ieee80211_register_hw(il->hw); 3562 if (ret) { 3563 IL_ERR("Failed to register hw (error %d)\n", ret); 3564 return ret; 3565 } 3566 il->mac80211_registered = 1; 3567 3568 return 0; 3569 } 3570 3571 static int 3572 il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 3573 { 3574 int err = 0; 3575 struct il_priv *il; 3576 struct ieee80211_hw *hw; 3577 struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data); 3578 struct il3945_eeprom *eeprom; 3579 unsigned long flags; 3580 3581 /*********************** 3582 * 1. Allocating HW data 3583 * ********************/ 3584 3585 hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il3945_mac_ops); 3586 if (!hw) { 3587 err = -ENOMEM; 3588 goto out; 3589 } 3590 il = hw->priv; 3591 il->hw = hw; 3592 SET_IEEE80211_DEV(hw, &pdev->dev); 3593 3594 il->cmd_queue = IL39_CMD_QUEUE_NUM; 3595 3596 D_INFO("*** LOAD DRIVER ***\n"); 3597 il->cfg = cfg; 3598 il->ops = &il3945_ops; 3599 #ifdef CONFIG_IWLEGACY_DEBUGFS 3600 il->debugfs_ops = &il3945_debugfs_ops; 3601 #endif 3602 il->pci_dev = pdev; 3603 il->inta_mask = CSR_INI_SET_MASK; 3604 3605 /*************************** 3606 * 2. Initializing PCI bus 3607 * *************************/ 3608 pci_disable_link_state(pdev, 3609 PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | 3610 PCIE_LINK_STATE_CLKPM); 3611 3612 if (pci_enable_device(pdev)) { 3613 err = -ENODEV; 3614 goto out_ieee80211_free_hw; 3615 } 3616 3617 pci_set_master(pdev); 3618 3619 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); 3620 if (err) { 3621 IL_WARN("No suitable DMA available.\n"); 3622 goto out_pci_disable_device; 3623 } 3624 3625 pci_set_drvdata(pdev, il); 3626 err = pci_request_regions(pdev, DRV_NAME); 3627 if (err) 3628 goto out_pci_disable_device; 3629 3630 /*********************** 3631 * 3. Read REV Register 3632 * ********************/ 3633 il->hw_base = pci_ioremap_bar(pdev, 0); 3634 if (!il->hw_base) { 3635 err = -ENODEV; 3636 goto out_pci_release_regions; 3637 } 3638 3639 D_INFO("pci_resource_len = 0x%08llx\n", 3640 (unsigned long long)pci_resource_len(pdev, 0)); 3641 D_INFO("pci_resource_base = %p\n", il->hw_base); 3642 3643 /* We disable the RETRY_TIMEOUT register (0x41) to keep 3644 * PCI Tx retries from interfering with C3 CPU state */ 3645 pci_write_config_byte(pdev, 0x41, 0x00); 3646 3647 /* these spin locks will be used in apm_init and EEPROM access 3648 * we should init now 3649 */ 3650 spin_lock_init(&il->reg_lock); 3651 spin_lock_init(&il->lock); 3652 3653 /* 3654 * stop and reset the on-board processor just in case it is in a 3655 * strange state ... like being left stranded by a primary kernel 3656 * and this is now the kdump kernel trying to start up 3657 */ 3658 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); 3659 3660 /*********************** 3661 * 4. Read EEPROM 3662 * ********************/ 3663 3664 /* Read the EEPROM */ 3665 err = il_eeprom_init(il); 3666 if (err) { 3667 IL_ERR("Unable to init EEPROM\n"); 3668 goto out_iounmap; 3669 } 3670 /* MAC Address location in EEPROM same for 3945/4965 */ 3671 eeprom = (struct il3945_eeprom *)il->eeprom; 3672 D_INFO("MAC address: %pM\n", eeprom->mac_address); 3673 SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address); 3674 3675 /*********************** 3676 * 5. Setup HW Constants 3677 * ********************/ 3678 /* Device-specific setup */ 3679 err = il3945_hw_set_hw_params(il); 3680 if (err) { 3681 IL_ERR("failed to set hw settings\n"); 3682 goto out_eeprom_free; 3683 } 3684 3685 /*********************** 3686 * 6. Setup il 3687 * ********************/ 3688 3689 err = il3945_init_drv(il); 3690 if (err) { 3691 IL_ERR("initializing driver failed\n"); 3692 goto out_unset_hw_params; 3693 } 3694 3695 IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name); 3696 3697 /*********************** 3698 * 7. Setup Services 3699 * ********************/ 3700 3701 spin_lock_irqsave(&il->lock, flags); 3702 il_disable_interrupts(il); 3703 spin_unlock_irqrestore(&il->lock, flags); 3704 3705 pci_enable_msi(il->pci_dev); 3706 3707 err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il); 3708 if (err) { 3709 IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq); 3710 goto out_disable_msi; 3711 } 3712 3713 err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group); 3714 if (err) { 3715 IL_ERR("failed to create sysfs device attributes\n"); 3716 goto out_release_irq; 3717 } 3718 3719 il_set_rxon_channel(il, &il->bands[NL80211_BAND_2GHZ].channels[5]); 3720 il3945_setup_deferred_work(il); 3721 il3945_setup_handlers(il); 3722 il_power_initialize(il); 3723 3724 /********************************* 3725 * 8. Setup and Register mac80211 3726 * *******************************/ 3727 3728 il_enable_interrupts(il); 3729 3730 err = il3945_setup_mac(il); 3731 if (err) 3732 goto out_remove_sysfs; 3733 3734 il_dbgfs_register(il, DRV_NAME); 3735 3736 /* Start monitoring the killswitch */ 3737 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ); 3738 3739 return 0; 3740 3741 out_remove_sysfs: 3742 destroy_workqueue(il->workqueue); 3743 il->workqueue = NULL; 3744 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group); 3745 out_release_irq: 3746 free_irq(il->pci_dev->irq, il); 3747 out_disable_msi: 3748 pci_disable_msi(il->pci_dev); 3749 il_free_geos(il); 3750 il_free_channel_map(il); 3751 out_unset_hw_params: 3752 il3945_unset_hw_params(il); 3753 out_eeprom_free: 3754 il_eeprom_free(il); 3755 out_iounmap: 3756 iounmap(il->hw_base); 3757 out_pci_release_regions: 3758 pci_release_regions(pdev); 3759 out_pci_disable_device: 3760 pci_disable_device(pdev); 3761 out_ieee80211_free_hw: 3762 ieee80211_free_hw(il->hw); 3763 out: 3764 return err; 3765 } 3766 3767 static void 3768 il3945_pci_remove(struct pci_dev *pdev) 3769 { 3770 struct il_priv *il = pci_get_drvdata(pdev); 3771 unsigned long flags; 3772 3773 if (!il) 3774 return; 3775 3776 D_INFO("*** UNLOAD DRIVER ***\n"); 3777 3778 il_dbgfs_unregister(il); 3779 3780 set_bit(S_EXIT_PENDING, &il->status); 3781 3782 il_leds_exit(il); 3783 3784 if (il->mac80211_registered) { 3785 ieee80211_unregister_hw(il->hw); 3786 il->mac80211_registered = 0; 3787 } else { 3788 il3945_down(il); 3789 } 3790 3791 /* 3792 * Make sure device is reset to low power before unloading driver. 3793 * This may be redundant with il_down(), but there are paths to 3794 * run il_down() without calling apm_ops.stop(), and there are 3795 * paths to avoid running il_down() at all before leaving driver. 3796 * This (inexpensive) call *makes sure* device is reset. 3797 */ 3798 il_apm_stop(il); 3799 3800 /* make sure we flush any pending irq or 3801 * tasklet for the driver 3802 */ 3803 spin_lock_irqsave(&il->lock, flags); 3804 il_disable_interrupts(il); 3805 spin_unlock_irqrestore(&il->lock, flags); 3806 3807 il3945_synchronize_irq(il); 3808 3809 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group); 3810 3811 cancel_delayed_work_sync(&il->_3945.rfkill_poll); 3812 3813 il3945_dealloc_ucode_pci(il); 3814 3815 if (il->rxq.bd) 3816 il3945_rx_queue_free(il, &il->rxq); 3817 il3945_hw_txq_ctx_free(il); 3818 3819 il3945_unset_hw_params(il); 3820 3821 /*netif_stop_queue(dev); */ 3822 flush_workqueue(il->workqueue); 3823 3824 /* ieee80211_unregister_hw calls il3945_mac_stop, which flushes 3825 * il->workqueue... so we can't take down the workqueue 3826 * until now... */ 3827 destroy_workqueue(il->workqueue); 3828 il->workqueue = NULL; 3829 3830 free_irq(pdev->irq, il); 3831 pci_disable_msi(pdev); 3832 3833 iounmap(il->hw_base); 3834 pci_release_regions(pdev); 3835 pci_disable_device(pdev); 3836 3837 il_free_channel_map(il); 3838 il_free_geos(il); 3839 kfree(il->scan_cmd); 3840 dev_kfree_skb(il->beacon_skb); 3841 ieee80211_free_hw(il->hw); 3842 } 3843 3844 /***************************************************************************** 3845 * 3846 * driver and module entry point 3847 * 3848 *****************************************************************************/ 3849 3850 static struct pci_driver il3945_driver = { 3851 .name = DRV_NAME, 3852 .id_table = il3945_hw_card_ids, 3853 .probe = il3945_pci_probe, 3854 .remove = il3945_pci_remove, 3855 .driver.pm = IL_LEGACY_PM_OPS, 3856 }; 3857 3858 static int __init 3859 il3945_init(void) 3860 { 3861 3862 int ret; 3863 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); 3864 pr_info(DRV_COPYRIGHT "\n"); 3865 3866 /* 3867 * Disabling hardware scan means that mac80211 will perform scans 3868 * "the hard way", rather than using device's scan. 3869 */ 3870 if (il3945_mod_params.disable_hw_scan) { 3871 pr_info("hw_scan is disabled\n"); 3872 il3945_mac_ops.hw_scan = NULL; 3873 } 3874 3875 ret = il3945_rate_control_register(); 3876 if (ret) { 3877 pr_err("Unable to register rate control algorithm: %d\n", ret); 3878 return ret; 3879 } 3880 3881 ret = pci_register_driver(&il3945_driver); 3882 if (ret) { 3883 pr_err("Unable to initialize PCI module\n"); 3884 goto error_register; 3885 } 3886 3887 return ret; 3888 3889 error_register: 3890 il3945_rate_control_unregister(); 3891 return ret; 3892 } 3893 3894 static void __exit 3895 il3945_exit(void) 3896 { 3897 pci_unregister_driver(&il3945_driver); 3898 il3945_rate_control_unregister(); 3899 } 3900 3901 MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX)); 3902 3903 module_param_named(antenna, il3945_mod_params.antenna, int, 0444); 3904 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); 3905 module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, 0444); 3906 MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])"); 3907 module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int, 3908 0444); 3909 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)"); 3910 #ifdef CONFIG_IWLEGACY_DEBUG 3911 module_param_named(debug, il_debug_level, uint, 0644); 3912 MODULE_PARM_DESC(debug, "debug output mask"); 3913 #endif 3914 module_param_named(fw_restart, il3945_mod_params.restart_fw, int, 0444); 3915 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); 3916 3917 module_exit(il3945_exit); 3918 module_init(il3945_init); 3919