1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
4  *
5  * Portions of this file are derived from the ipw3945 project, as well
6  * as portions of the ieee80211 subsystem header files.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of version 2 of the GNU General Public License as
10  * published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but WITHOUT
13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
15  * more details.
16  *
17  * You should have received a copy of the GNU General Public License along with
18  * this program; if not, write to the Free Software Foundation, Inc.,
19  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20  *
21  * The full GNU General Public License is included in this distribution in the
22  * file called LICENSE.
23  *
24  * Contact Information:
25  *  Intel Linux Wireless <ilw@linux.intel.com>
26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27  *
28  *****************************************************************************/
29 
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
31 
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/pci.h>
36 #include <linux/pci-aspm.h>
37 #include <linux/slab.h>
38 #include <linux/dma-mapping.h>
39 #include <linux/delay.h>
40 #include <linux/sched.h>
41 #include <linux/skbuff.h>
42 #include <linux/netdevice.h>
43 #include <linux/firmware.h>
44 #include <linux/etherdevice.h>
45 #include <linux/if_arp.h>
46 
47 #include <net/ieee80211_radiotap.h>
48 #include <net/mac80211.h>
49 
50 #include <asm/div64.h>
51 
52 #define DRV_NAME	"iwl3945"
53 
54 #include "commands.h"
55 #include "common.h"
56 #include "3945.h"
57 #include "iwl-spectrum.h"
58 
59 /*
60  * module name, copyright, version, etc.
61  */
62 
63 #define DRV_DESCRIPTION	\
64 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
65 
66 #ifdef CONFIG_IWLEGACY_DEBUG
67 #define VD "d"
68 #else
69 #define VD
70 #endif
71 
72 /*
73  * add "s" to indicate spectrum measurement included.
74  * we add it here to be consistent with previous releases in which
75  * this was configurable.
76  */
77 #define DRV_VERSION  IWLWIFI_VERSION VD "s"
78 #define DRV_COPYRIGHT	"Copyright(c) 2003-2011 Intel Corporation"
79 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
80 
81 MODULE_DESCRIPTION(DRV_DESCRIPTION);
82 MODULE_VERSION(DRV_VERSION);
83 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
84 MODULE_LICENSE("GPL");
85 
86  /* module parameters */
87 struct il_mod_params il3945_mod_params = {
88 	.sw_crypto = 1,
89 	.restart_fw = 1,
90 	.disable_hw_scan = 1,
91 	/* the rest are 0 by default */
92 };
93 
94 /**
95  * il3945_get_antenna_flags - Get antenna flags for RXON command
96  * @il: eeprom and antenna fields are used to determine antenna flags
97  *
98  * il->eeprom39  is used to determine if antenna AUX/MAIN are reversed
99  * il3945_mod_params.antenna specifies the antenna diversity mode:
100  *
101  * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
102  * IL_ANTENNA_MAIN      - Force MAIN antenna
103  * IL_ANTENNA_AUX       - Force AUX antenna
104  */
105 __le32
106 il3945_get_antenna_flags(const struct il_priv *il)
107 {
108 	struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
109 
110 	switch (il3945_mod_params.antenna) {
111 	case IL_ANTENNA_DIVERSITY:
112 		return 0;
113 
114 	case IL_ANTENNA_MAIN:
115 		if (eeprom->antenna_switch_type)
116 			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
117 		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
118 
119 	case IL_ANTENNA_AUX:
120 		if (eeprom->antenna_switch_type)
121 			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
122 		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
123 	}
124 
125 	/* bad antenna selector value */
126 	IL_ERR("Bad antenna selector value (0x%x)\n",
127 	       il3945_mod_params.antenna);
128 
129 	return 0;		/* "diversity" is default if error */
130 }
131 
132 static int
133 il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
134 				 struct ieee80211_key_conf *keyconf, u8 sta_id)
135 {
136 	unsigned long flags;
137 	__le16 key_flags = 0;
138 	int ret;
139 
140 	key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
141 	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
142 
143 	if (sta_id == il->hw_params.bcast_id)
144 		key_flags |= STA_KEY_MULTICAST_MSK;
145 
146 	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
147 	keyconf->hw_key_idx = keyconf->keyidx;
148 	key_flags &= ~STA_KEY_FLG_INVALID;
149 
150 	spin_lock_irqsave(&il->sta_lock, flags);
151 	il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
152 	il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
153 	memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
154 
155 	memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
156 
157 	if ((il->stations[sta_id].sta.key.
158 	     key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
159 		il->stations[sta_id].sta.key.key_offset =
160 		    il_get_free_ucode_key_idx(il);
161 	/* else, we are overriding an existing key => no need to allocated room
162 	 * in uCode. */
163 
164 	WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
165 	     "no space for a new key");
166 
167 	il->stations[sta_id].sta.key.key_flags = key_flags;
168 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
169 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
170 
171 	D_INFO("hwcrypto: modify ucode station key info\n");
172 
173 	ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
174 
175 	spin_unlock_irqrestore(&il->sta_lock, flags);
176 
177 	return ret;
178 }
179 
180 static int
181 il3945_set_tkip_dynamic_key_info(struct il_priv *il,
182 				 struct ieee80211_key_conf *keyconf, u8 sta_id)
183 {
184 	return -EOPNOTSUPP;
185 }
186 
187 static int
188 il3945_set_wep_dynamic_key_info(struct il_priv *il,
189 				struct ieee80211_key_conf *keyconf, u8 sta_id)
190 {
191 	return -EOPNOTSUPP;
192 }
193 
194 static int
195 il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
196 {
197 	unsigned long flags;
198 	struct il_addsta_cmd sta_cmd;
199 
200 	spin_lock_irqsave(&il->sta_lock, flags);
201 	memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
202 	memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
203 	il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
204 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
205 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
206 	memcpy(&sta_cmd, &il->stations[sta_id].sta,
207 	       sizeof(struct il_addsta_cmd));
208 	spin_unlock_irqrestore(&il->sta_lock, flags);
209 
210 	D_INFO("hwcrypto: clear ucode station key info\n");
211 	return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
212 }
213 
214 static int
215 il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
216 		       u8 sta_id)
217 {
218 	int ret = 0;
219 
220 	keyconf->hw_key_idx = HW_KEY_DYNAMIC;
221 
222 	switch (keyconf->cipher) {
223 	case WLAN_CIPHER_SUITE_CCMP:
224 		ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
225 		break;
226 	case WLAN_CIPHER_SUITE_TKIP:
227 		ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
228 		break;
229 	case WLAN_CIPHER_SUITE_WEP40:
230 	case WLAN_CIPHER_SUITE_WEP104:
231 		ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
232 		break;
233 	default:
234 		IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher);
235 		ret = -EINVAL;
236 	}
237 
238 	D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
239 	      keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
240 
241 	return ret;
242 }
243 
244 static int
245 il3945_remove_static_key(struct il_priv *il)
246 {
247 	int ret = -EOPNOTSUPP;
248 
249 	return ret;
250 }
251 
252 static int
253 il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key)
254 {
255 	if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
256 	    key->cipher == WLAN_CIPHER_SUITE_WEP104)
257 		return -EOPNOTSUPP;
258 
259 	IL_ERR("Static key invalid: cipher %x\n", key->cipher);
260 	return -EINVAL;
261 }
262 
263 static void
264 il3945_clear_free_frames(struct il_priv *il)
265 {
266 	struct list_head *element;
267 
268 	D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
269 
270 	while (!list_empty(&il->free_frames)) {
271 		element = il->free_frames.next;
272 		list_del(element);
273 		kfree(list_entry(element, struct il3945_frame, list));
274 		il->frames_count--;
275 	}
276 
277 	if (il->frames_count) {
278 		IL_WARN("%d frames still in use.  Did we lose one?\n",
279 			il->frames_count);
280 		il->frames_count = 0;
281 	}
282 }
283 
284 static struct il3945_frame *
285 il3945_get_free_frame(struct il_priv *il)
286 {
287 	struct il3945_frame *frame;
288 	struct list_head *element;
289 	if (list_empty(&il->free_frames)) {
290 		frame = kzalloc(sizeof(*frame), GFP_KERNEL);
291 		if (!frame) {
292 			IL_ERR("Could not allocate frame!\n");
293 			return NULL;
294 		}
295 
296 		il->frames_count++;
297 		return frame;
298 	}
299 
300 	element = il->free_frames.next;
301 	list_del(element);
302 	return list_entry(element, struct il3945_frame, list);
303 }
304 
305 static void
306 il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
307 {
308 	memset(frame, 0, sizeof(*frame));
309 	list_add(&frame->list, &il->free_frames);
310 }
311 
312 unsigned int
313 il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
314 			 int left)
315 {
316 
317 	if (!il_is_associated(il) || !il->beacon_skb)
318 		return 0;
319 
320 	if (il->beacon_skb->len > left)
321 		return 0;
322 
323 	memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
324 
325 	return il->beacon_skb->len;
326 }
327 
328 static int
329 il3945_send_beacon_cmd(struct il_priv *il)
330 {
331 	struct il3945_frame *frame;
332 	unsigned int frame_size;
333 	int rc;
334 	u8 rate;
335 
336 	frame = il3945_get_free_frame(il);
337 
338 	if (!frame) {
339 		IL_ERR("Could not obtain free frame buffer for beacon "
340 		       "command.\n");
341 		return -ENOMEM;
342 	}
343 
344 	rate = il_get_lowest_plcp(il);
345 
346 	frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);
347 
348 	rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
349 
350 	il3945_free_frame(il, frame);
351 
352 	return rc;
353 }
354 
355 static void
356 il3945_unset_hw_params(struct il_priv *il)
357 {
358 	if (il->_3945.shared_virt)
359 		dma_free_coherent(&il->pci_dev->dev,
360 				  sizeof(struct il3945_shared),
361 				  il->_3945.shared_virt, il->_3945.shared_phys);
362 }
363 
364 static void
365 il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
366 			     struct il_device_cmd *cmd,
367 			     struct sk_buff *skb_frag, int sta_id)
368 {
369 	struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
370 	struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;
371 
372 	tx_cmd->sec_ctl = 0;
373 
374 	switch (keyinfo->cipher) {
375 	case WLAN_CIPHER_SUITE_CCMP:
376 		tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
377 		memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
378 		D_TX("tx_cmd with AES hwcrypto\n");
379 		break;
380 
381 	case WLAN_CIPHER_SUITE_TKIP:
382 		break;
383 
384 	case WLAN_CIPHER_SUITE_WEP104:
385 		tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
386 		/* fall through */
387 	case WLAN_CIPHER_SUITE_WEP40:
388 		tx_cmd->sec_ctl |=
389 		    TX_CMD_SEC_WEP | (info->control.hw_key->
390 				      hw_key_idx & TX_CMD_SEC_MSK) <<
391 		    TX_CMD_SEC_SHIFT;
392 
393 		memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
394 
395 		D_TX("Configuring packet for WEP encryption " "with key %d\n",
396 		     info->control.hw_key->hw_key_idx);
397 		break;
398 
399 	default:
400 		IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
401 		break;
402 	}
403 }
404 
405 /*
406  * handle build C_TX command notification.
407  */
408 static void
409 il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd,
410 			  struct ieee80211_tx_info *info,
411 			  struct ieee80211_hdr *hdr, u8 std_id)
412 {
413 	struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
414 	__le32 tx_flags = tx_cmd->tx_flags;
415 	__le16 fc = hdr->frame_control;
416 
417 	tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
418 	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
419 		tx_flags |= TX_CMD_FLG_ACK_MSK;
420 		if (ieee80211_is_mgmt(fc))
421 			tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
422 		if (ieee80211_is_probe_resp(fc) &&
423 		    !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
424 			tx_flags |= TX_CMD_FLG_TSF_MSK;
425 	} else {
426 		tx_flags &= (~TX_CMD_FLG_ACK_MSK);
427 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
428 	}
429 
430 	tx_cmd->sta_id = std_id;
431 	if (ieee80211_has_morefrags(fc))
432 		tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
433 
434 	if (ieee80211_is_data_qos(fc)) {
435 		u8 *qc = ieee80211_get_qos_ctl(hdr);
436 		tx_cmd->tid_tspec = qc[0] & 0xf;
437 		tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
438 	} else {
439 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
440 	}
441 
442 	il_tx_cmd_protection(il, info, fc, &tx_flags);
443 
444 	tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
445 	if (ieee80211_is_mgmt(fc)) {
446 		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
447 			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
448 		else
449 			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
450 	} else {
451 		tx_cmd->timeout.pm_frame_timeout = 0;
452 	}
453 
454 	tx_cmd->driver_txop = 0;
455 	tx_cmd->tx_flags = tx_flags;
456 	tx_cmd->next_frame_len = 0;
457 }
458 
459 /*
460  * start C_TX command process
461  */
462 static int
463 il3945_tx_skb(struct il_priv *il,
464 	      struct ieee80211_sta *sta,
465 	      struct sk_buff *skb)
466 {
467 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
468 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
469 	struct il3945_tx_cmd *tx_cmd;
470 	struct il_tx_queue *txq = NULL;
471 	struct il_queue *q = NULL;
472 	struct il_device_cmd *out_cmd;
473 	struct il_cmd_meta *out_meta;
474 	dma_addr_t phys_addr;
475 	dma_addr_t txcmd_phys;
476 	int txq_id = skb_get_queue_mapping(skb);
477 	u16 len, idx, hdr_len;
478 	u16 firstlen, secondlen;
479 	u8 id;
480 	u8 unicast;
481 	u8 sta_id;
482 	u8 tid = 0;
483 	__le16 fc;
484 	u8 wait_write_ptr = 0;
485 	unsigned long flags;
486 
487 	spin_lock_irqsave(&il->lock, flags);
488 	if (il_is_rfkill(il)) {
489 		D_DROP("Dropping - RF KILL\n");
490 		goto drop_unlock;
491 	}
492 
493 	if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) ==
494 	    IL_INVALID_RATE) {
495 		IL_ERR("ERROR: No TX rate available.\n");
496 		goto drop_unlock;
497 	}
498 
499 	unicast = !is_multicast_ether_addr(hdr->addr1);
500 	id = 0;
501 
502 	fc = hdr->frame_control;
503 
504 #ifdef CONFIG_IWLEGACY_DEBUG
505 	if (ieee80211_is_auth(fc))
506 		D_TX("Sending AUTH frame\n");
507 	else if (ieee80211_is_assoc_req(fc))
508 		D_TX("Sending ASSOC frame\n");
509 	else if (ieee80211_is_reassoc_req(fc))
510 		D_TX("Sending REASSOC frame\n");
511 #endif
512 
513 	spin_unlock_irqrestore(&il->lock, flags);
514 
515 	hdr_len = ieee80211_hdrlen(fc);
516 
517 	/* Find idx into station table for destination station */
518 	sta_id = il_sta_id_or_broadcast(il, sta);
519 	if (sta_id == IL_INVALID_STATION) {
520 		D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
521 		goto drop;
522 	}
523 
524 	D_RATE("station Id %d\n", sta_id);
525 
526 	if (ieee80211_is_data_qos(fc)) {
527 		u8 *qc = ieee80211_get_qos_ctl(hdr);
528 		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
529 		if (unlikely(tid >= MAX_TID_COUNT))
530 			goto drop;
531 	}
532 
533 	/* Descriptor for chosen Tx queue */
534 	txq = &il->txq[txq_id];
535 	q = &txq->q;
536 
537 	if ((il_queue_space(q) < q->high_mark))
538 		goto drop;
539 
540 	spin_lock_irqsave(&il->lock, flags);
541 
542 	idx = il_get_cmd_idx(q, q->write_ptr, 0);
543 
544 	txq->skbs[q->write_ptr] = skb;
545 
546 	/* Init first empty entry in queue's array of Tx/cmd buffers */
547 	out_cmd = txq->cmd[idx];
548 	out_meta = &txq->meta[idx];
549 	tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
550 	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
551 	memset(tx_cmd, 0, sizeof(*tx_cmd));
552 
553 	/*
554 	 * Set up the Tx-command (not MAC!) header.
555 	 * Store the chosen Tx queue and TFD idx within the sequence field;
556 	 * after Tx, uCode's Tx response will return this value so driver can
557 	 * locate the frame within the tx queue and do post-tx processing.
558 	 */
559 	out_cmd->hdr.cmd = C_TX;
560 	out_cmd->hdr.sequence =
561 	    cpu_to_le16((u16)
562 			(QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
563 
564 	/* Copy MAC header from skb into command buffer */
565 	memcpy(tx_cmd->hdr, hdr, hdr_len);
566 
567 	if (info->control.hw_key)
568 		il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);
569 
570 	/* TODO need this for burst mode later on */
571 	il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);
572 
573 	il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id);
574 
575 	/* Total # bytes to be transmitted */
576 	tx_cmd->len = cpu_to_le16((u16) skb->len);
577 
578 	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
579 	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
580 
581 	/*
582 	 * Use the first empty entry in this queue's command buffer array
583 	 * to contain the Tx command and MAC header concatenated together
584 	 * (payload data will be in another buffer).
585 	 * Size of this varies, due to varying MAC header length.
586 	 * If end is not dword aligned, we'll have 2 extra bytes at the end
587 	 * of the MAC header (device reads on dword boundaries).
588 	 * We'll tell device about this padding later.
589 	 */
590 	len =
591 	    sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
592 	    hdr_len;
593 	firstlen = (len + 3) & ~3;
594 
595 	/* Physical address of this Tx command's header (not MAC header!),
596 	 * within command buffer array. */
597 	txcmd_phys =
598 	    pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen,
599 			   PCI_DMA_TODEVICE);
600 	if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys)))
601 		goto drop_unlock;
602 
603 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
604 	 * if any (802.11 null frames have no payload). */
605 	secondlen = skb->len - hdr_len;
606 	if (secondlen > 0) {
607 		phys_addr =
608 		    pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen,
609 				   PCI_DMA_TODEVICE);
610 		if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr)))
611 			goto drop_unlock;
612 	}
613 
614 	/* Add buffer containing Tx command and MAC(!) header to TFD's
615 	 * first entry */
616 	il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
617 	dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
618 	dma_unmap_len_set(out_meta, len, firstlen);
619 	if (secondlen > 0)
620 		il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0,
621 					       U32_PAD(secondlen));
622 
623 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
624 		txq->need_update = 1;
625 	} else {
626 		wait_write_ptr = 1;
627 		txq->need_update = 0;
628 	}
629 
630 	il_update_stats(il, true, fc, skb->len);
631 
632 	D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
633 	D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
634 	il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
635 	il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr,
636 			  ieee80211_hdrlen(fc));
637 
638 	/* Tell device the write idx *just past* this latest filled TFD */
639 	q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
640 	il_txq_update_write_ptr(il, txq);
641 	spin_unlock_irqrestore(&il->lock, flags);
642 
643 	if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
644 		if (wait_write_ptr) {
645 			spin_lock_irqsave(&il->lock, flags);
646 			txq->need_update = 1;
647 			il_txq_update_write_ptr(il, txq);
648 			spin_unlock_irqrestore(&il->lock, flags);
649 		}
650 
651 		il_stop_queue(il, txq);
652 	}
653 
654 	return 0;
655 
656 drop_unlock:
657 	spin_unlock_irqrestore(&il->lock, flags);
658 drop:
659 	return -1;
660 }
661 
662 static int
663 il3945_get_measurement(struct il_priv *il,
664 		       struct ieee80211_measurement_params *params, u8 type)
665 {
666 	struct il_spectrum_cmd spectrum;
667 	struct il_rx_pkt *pkt;
668 	struct il_host_cmd cmd = {
669 		.id = C_SPECTRUM_MEASUREMENT,
670 		.data = (void *)&spectrum,
671 		.flags = CMD_WANT_SKB,
672 	};
673 	u32 add_time = le64_to_cpu(params->start_time);
674 	int rc;
675 	int spectrum_resp_status;
676 	int duration = le16_to_cpu(params->duration);
677 
678 	if (il_is_associated(il))
679 		add_time =
680 		    il_usecs_to_beacons(il,
681 					le64_to_cpu(params->start_time) -
682 					il->_3945.last_tsf,
683 					le16_to_cpu(il->timing.beacon_interval));
684 
685 	memset(&spectrum, 0, sizeof(spectrum));
686 
687 	spectrum.channel_count = cpu_to_le16(1);
688 	spectrum.flags =
689 	    RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
690 	spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
691 	cmd.len = sizeof(spectrum);
692 	spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
693 
694 	if (il_is_associated(il))
695 		spectrum.start_time =
696 		    il_add_beacon_time(il, il->_3945.last_beacon_time, add_time,
697 				       le16_to_cpu(il->timing.beacon_interval));
698 	else
699 		spectrum.start_time = 0;
700 
701 	spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
702 	spectrum.channels[0].channel = params->channel;
703 	spectrum.channels[0].type = type;
704 	if (il->active.flags & RXON_FLG_BAND_24G_MSK)
705 		spectrum.flags |=
706 		    RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK |
707 		    RXON_FLG_TGG_PROTECT_MSK;
708 
709 	rc = il_send_cmd_sync(il, &cmd);
710 	if (rc)
711 		return rc;
712 
713 	pkt = (struct il_rx_pkt *)cmd.reply_page;
714 	if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
715 		IL_ERR("Bad return from N_RX_ON_ASSOC command\n");
716 		rc = -EIO;
717 	}
718 
719 	spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
720 	switch (spectrum_resp_status) {
721 	case 0:		/* Command will be handled */
722 		if (pkt->u.spectrum.id != 0xff) {
723 			D_INFO("Replaced existing measurement: %d\n",
724 			       pkt->u.spectrum.id);
725 			il->measurement_status &= ~MEASUREMENT_READY;
726 		}
727 		il->measurement_status |= MEASUREMENT_ACTIVE;
728 		rc = 0;
729 		break;
730 
731 	case 1:		/* Command will not be handled */
732 		rc = -EAGAIN;
733 		break;
734 	}
735 
736 	il_free_pages(il, cmd.reply_page);
737 
738 	return rc;
739 }
740 
741 static void
742 il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
743 {
744 	struct il_rx_pkt *pkt = rxb_addr(rxb);
745 	struct il_alive_resp *palive;
746 	struct delayed_work *pwork;
747 
748 	palive = &pkt->u.alive_frame;
749 
750 	D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
751 	       palive->is_valid, palive->ver_type, palive->ver_subtype);
752 
753 	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
754 		D_INFO("Initialization Alive received.\n");
755 		memcpy(&il->card_alive_init, &pkt->u.alive_frame,
756 		       sizeof(struct il_alive_resp));
757 		pwork = &il->init_alive_start;
758 	} else {
759 		D_INFO("Runtime Alive received.\n");
760 		memcpy(&il->card_alive, &pkt->u.alive_frame,
761 		       sizeof(struct il_alive_resp));
762 		pwork = &il->alive_start;
763 		il3945_disable_events(il);
764 	}
765 
766 	/* We delay the ALIVE response by 5ms to
767 	 * give the HW RF Kill time to activate... */
768 	if (palive->is_valid == UCODE_VALID_OK)
769 		queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
770 	else
771 		IL_WARN("uCode did not respond OK.\n");
772 }
773 
774 static void
775 il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb)
776 {
777 #ifdef CONFIG_IWLEGACY_DEBUG
778 	struct il_rx_pkt *pkt = rxb_addr(rxb);
779 #endif
780 
781 	D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status);
782 }
783 
784 static void
785 il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
786 {
787 	struct il_rx_pkt *pkt = rxb_addr(rxb);
788 	struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
789 #ifdef CONFIG_IWLEGACY_DEBUG
790 	u8 rate = beacon->beacon_notify_hdr.rate;
791 
792 	D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n",
793 	     le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
794 	     beacon->beacon_notify_hdr.failure_frame,
795 	     le32_to_cpu(beacon->ibss_mgr_status),
796 	     le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
797 #endif
798 
799 	il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
800 
801 }
802 
803 /* Handle notification from uCode that card's power state is changing
804  * due to software, hardware, or critical temperature RFKILL */
805 static void
806 il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
807 {
808 	struct il_rx_pkt *pkt = rxb_addr(rxb);
809 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
810 	unsigned long status = il->status;
811 
812 	IL_WARN("Card state received: HW:%s SW:%s\n",
813 		(flags & HW_CARD_DISABLED) ? "Kill" : "On",
814 		(flags & SW_CARD_DISABLED) ? "Kill" : "On");
815 
816 	_il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
817 
818 	if (flags & HW_CARD_DISABLED)
819 		set_bit(S_RFKILL, &il->status);
820 	else
821 		clear_bit(S_RFKILL, &il->status);
822 
823 	il_scan_cancel(il);
824 
825 	if ((test_bit(S_RFKILL, &status) !=
826 	     test_bit(S_RFKILL, &il->status)))
827 		wiphy_rfkill_set_hw_state(il->hw->wiphy,
828 					  test_bit(S_RFKILL, &il->status));
829 	else
830 		wake_up(&il->wait_command_queue);
831 }
832 
833 /**
834  * il3945_setup_handlers - Initialize Rx handler callbacks
835  *
836  * Setup the RX handlers for each of the reply types sent from the uCode
837  * to the host.
838  *
839  * This function chains into the hardware specific files for them to setup
840  * any hardware specific handlers as well.
841  */
842 static void
843 il3945_setup_handlers(struct il_priv *il)
844 {
845 	il->handlers[N_ALIVE] = il3945_hdl_alive;
846 	il->handlers[C_ADD_STA] = il3945_hdl_add_sta;
847 	il->handlers[N_ERROR] = il_hdl_error;
848 	il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
849 	il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
850 	il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
851 	il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
852 	il->handlers[N_BEACON] = il3945_hdl_beacon;
853 
854 	/*
855 	 * The same handler is used for both the REPLY to a discrete
856 	 * stats request from the host as well as for the periodic
857 	 * stats notifications (after received beacons) from the uCode.
858 	 */
859 	il->handlers[C_STATS] = il3945_hdl_c_stats;
860 	il->handlers[N_STATS] = il3945_hdl_stats;
861 
862 	il_setup_rx_scan_handlers(il);
863 	il->handlers[N_CARD_STATE] = il3945_hdl_card_state;
864 
865 	/* Set up hardware specific Rx handlers */
866 	il3945_hw_handler_setup(il);
867 }
868 
869 /************************** RX-FUNCTIONS ****************************/
870 /*
871  * Rx theory of operation
872  *
873  * The host allocates 32 DMA target addresses and passes the host address
874  * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
875  * 0 to 31
876  *
877  * Rx Queue Indexes
878  * The host/firmware share two idx registers for managing the Rx buffers.
879  *
880  * The READ idx maps to the first position that the firmware may be writing
881  * to -- the driver can read up to (but not including) this position and get
882  * good data.
883  * The READ idx is managed by the firmware once the card is enabled.
884  *
885  * The WRITE idx maps to the last position the driver has read from -- the
886  * position preceding WRITE is the last slot the firmware can place a packet.
887  *
888  * The queue is empty (no good data) if WRITE = READ - 1, and is full if
889  * WRITE = READ.
890  *
891  * During initialization, the host sets up the READ queue position to the first
892  * IDX position, and WRITE to the last (READ - 1 wrapped)
893  *
894  * When the firmware places a packet in a buffer, it will advance the READ idx
895  * and fire the RX interrupt.  The driver can then query the READ idx and
896  * process as many packets as possible, moving the WRITE idx forward as it
897  * resets the Rx queue buffers with new memory.
898  *
899  * The management in the driver is as follows:
900  * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
901  *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
902  *   to replenish the iwl->rxq->rx_free.
903  * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
904  *   iwl->rxq is replenished and the READ IDX is updated (updating the
905  *   'processed' and 'read' driver idxes as well)
906  * + A received packet is processed and handed to the kernel network stack,
907  *   detached from the iwl->rxq.  The driver 'processed' idx is updated.
908  * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
909  *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
910  *   IDX is not incremented and iwl->status(RX_STALLED) is set.  If there
911  *   were enough free buffers and RX_STALLED is set it is cleared.
912  *
913  *
914  * Driver sequence:
915  *
916  * il3945_rx_replenish()     Replenishes rx_free list from rx_used, and calls
917  *                            il3945_rx_queue_restock
918  * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
919  *                            queue, updates firmware pointers, and updates
920  *                            the WRITE idx.  If insufficient rx_free buffers
921  *                            are available, schedules il3945_rx_replenish
922  *
923  * -- enable interrupts --
924  * ISR - il3945_rx()         Detach il_rx_bufs from pool up to the
925  *                            READ IDX, detaching the SKB from the pool.
926  *                            Moves the packet buffer from queue to rx_used.
927  *                            Calls il3945_rx_queue_restock to refill any empty
928  *                            slots.
929  * ...
930  *
931  */
932 
933 /**
934  * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
935  */
936 static inline __le32
937 il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
938 {
939 	return cpu_to_le32((u32) dma_addr);
940 }
941 
942 /**
943  * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
944  *
945  * If there are slots in the RX queue that need to be restocked,
946  * and we have free pre-allocated buffers, fill the ranks as much
947  * as we can, pulling from rx_free.
948  *
949  * This moves the 'write' idx forward to catch up with 'processed', and
950  * also updates the memory address in the firmware to reference the new
951  * target buffer.
952  */
953 static void
954 il3945_rx_queue_restock(struct il_priv *il)
955 {
956 	struct il_rx_queue *rxq = &il->rxq;
957 	struct list_head *element;
958 	struct il_rx_buf *rxb;
959 	unsigned long flags;
960 	int write;
961 
962 	spin_lock_irqsave(&rxq->lock, flags);
963 	write = rxq->write & ~0x7;
964 	while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
965 		/* Get next free Rx buffer, remove from free list */
966 		element = rxq->rx_free.next;
967 		rxb = list_entry(element, struct il_rx_buf, list);
968 		list_del(element);
969 
970 		/* Point to Rx buffer via next RBD in circular buffer */
971 		rxq->bd[rxq->write] =
972 		    il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
973 		rxq->queue[rxq->write] = rxb;
974 		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
975 		rxq->free_count--;
976 	}
977 	spin_unlock_irqrestore(&rxq->lock, flags);
978 	/* If the pre-allocated buffer pool is dropping low, schedule to
979 	 * refill it */
980 	if (rxq->free_count <= RX_LOW_WATERMARK)
981 		queue_work(il->workqueue, &il->rx_replenish);
982 
983 	/* If we've added more space for the firmware to place data, tell it.
984 	 * Increment device's write pointer in multiples of 8. */
985 	if (rxq->write_actual != (rxq->write & ~0x7) ||
986 	    abs(rxq->write - rxq->read) > 7) {
987 		spin_lock_irqsave(&rxq->lock, flags);
988 		rxq->need_update = 1;
989 		spin_unlock_irqrestore(&rxq->lock, flags);
990 		il_rx_queue_update_write_ptr(il, rxq);
991 	}
992 }
993 
994 /**
995  * il3945_rx_replenish - Move all used packet from rx_used to rx_free
996  *
997  * When moving to rx_free an SKB is allocated for the slot.
998  *
999  * Also restock the Rx queue via il3945_rx_queue_restock.
1000  * This is called as a scheduled work item (except for during initialization)
1001  */
1002 static void
1003 il3945_rx_allocate(struct il_priv *il, gfp_t priority)
1004 {
1005 	struct il_rx_queue *rxq = &il->rxq;
1006 	struct list_head *element;
1007 	struct il_rx_buf *rxb;
1008 	struct page *page;
1009 	dma_addr_t page_dma;
1010 	unsigned long flags;
1011 	gfp_t gfp_mask = priority;
1012 
1013 	while (1) {
1014 		spin_lock_irqsave(&rxq->lock, flags);
1015 		if (list_empty(&rxq->rx_used)) {
1016 			spin_unlock_irqrestore(&rxq->lock, flags);
1017 			return;
1018 		}
1019 		spin_unlock_irqrestore(&rxq->lock, flags);
1020 
1021 		if (rxq->free_count > RX_LOW_WATERMARK)
1022 			gfp_mask |= __GFP_NOWARN;
1023 
1024 		if (il->hw_params.rx_page_order > 0)
1025 			gfp_mask |= __GFP_COMP;
1026 
1027 		/* Alloc a new receive buffer */
1028 		page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
1029 		if (!page) {
1030 			if (net_ratelimit())
1031 				D_INFO("Failed to allocate SKB buffer.\n");
1032 			if (rxq->free_count <= RX_LOW_WATERMARK &&
1033 			    net_ratelimit())
1034 				IL_ERR("Failed to allocate SKB buffer with %0x."
1035 				       "Only %u free buffers remaining.\n",
1036 				       priority, rxq->free_count);
1037 			/* We don't reschedule replenish work here -- we will
1038 			 * call the restock method and if it still needs
1039 			 * more buffers it will schedule replenish */
1040 			break;
1041 		}
1042 
1043 		/* Get physical address of RB/SKB */
1044 		page_dma =
1045 		    pci_map_page(il->pci_dev, page, 0,
1046 				 PAGE_SIZE << il->hw_params.rx_page_order,
1047 				 PCI_DMA_FROMDEVICE);
1048 
1049 		if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) {
1050 			__free_pages(page, il->hw_params.rx_page_order);
1051 			break;
1052 		}
1053 
1054 		spin_lock_irqsave(&rxq->lock, flags);
1055 
1056 		if (list_empty(&rxq->rx_used)) {
1057 			spin_unlock_irqrestore(&rxq->lock, flags);
1058 			pci_unmap_page(il->pci_dev, page_dma,
1059 				       PAGE_SIZE << il->hw_params.rx_page_order,
1060 				       PCI_DMA_FROMDEVICE);
1061 			__free_pages(page, il->hw_params.rx_page_order);
1062 			return;
1063 		}
1064 
1065 		element = rxq->rx_used.next;
1066 		rxb = list_entry(element, struct il_rx_buf, list);
1067 		list_del(element);
1068 
1069 		rxb->page = page;
1070 		rxb->page_dma = page_dma;
1071 		list_add_tail(&rxb->list, &rxq->rx_free);
1072 		rxq->free_count++;
1073 		il->alloc_rxb_page++;
1074 
1075 		spin_unlock_irqrestore(&rxq->lock, flags);
1076 	}
1077 }
1078 
1079 void
1080 il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
1081 {
1082 	unsigned long flags;
1083 	int i;
1084 	spin_lock_irqsave(&rxq->lock, flags);
1085 	INIT_LIST_HEAD(&rxq->rx_free);
1086 	INIT_LIST_HEAD(&rxq->rx_used);
1087 	/* Fill the rx_used queue with _all_ of the Rx buffers */
1088 	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
1089 		/* In the reset function, these buffers may have been allocated
1090 		 * to an SKB, so we need to unmap and free potential storage */
1091 		if (rxq->pool[i].page != NULL) {
1092 			pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
1093 				       PAGE_SIZE << il->hw_params.rx_page_order,
1094 				       PCI_DMA_FROMDEVICE);
1095 			__il_free_pages(il, rxq->pool[i].page);
1096 			rxq->pool[i].page = NULL;
1097 		}
1098 		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
1099 	}
1100 
1101 	/* Set us so that we have processed and used all buffers, but have
1102 	 * not restocked the Rx queue with fresh buffers */
1103 	rxq->read = rxq->write = 0;
1104 	rxq->write_actual = 0;
1105 	rxq->free_count = 0;
1106 	spin_unlock_irqrestore(&rxq->lock, flags);
1107 }
1108 
1109 void
1110 il3945_rx_replenish(void *data)
1111 {
1112 	struct il_priv *il = data;
1113 	unsigned long flags;
1114 
1115 	il3945_rx_allocate(il, GFP_KERNEL);
1116 
1117 	spin_lock_irqsave(&il->lock, flags);
1118 	il3945_rx_queue_restock(il);
1119 	spin_unlock_irqrestore(&il->lock, flags);
1120 }
1121 
1122 static void
1123 il3945_rx_replenish_now(struct il_priv *il)
1124 {
1125 	il3945_rx_allocate(il, GFP_ATOMIC);
1126 
1127 	il3945_rx_queue_restock(il);
1128 }
1129 
1130 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
1131  * If an SKB has been detached, the POOL needs to have its SKB set to NULL
1132  * This free routine walks the list of POOL entries and if SKB is set to
1133  * non NULL it is unmapped and freed
1134  */
1135 static void
1136 il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
1137 {
1138 	int i;
1139 	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
1140 		if (rxq->pool[i].page != NULL) {
1141 			pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
1142 				       PAGE_SIZE << il->hw_params.rx_page_order,
1143 				       PCI_DMA_FROMDEVICE);
1144 			__il_free_pages(il, rxq->pool[i].page);
1145 			rxq->pool[i].page = NULL;
1146 		}
1147 	}
1148 
1149 	dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
1150 			  rxq->bd_dma);
1151 	dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
1152 			  rxq->rb_stts, rxq->rb_stts_dma);
1153 	rxq->bd = NULL;
1154 	rxq->rb_stts = NULL;
1155 }
1156 
1157 /* Convert linear signal-to-noise ratio into dB */
1158 static u8 ratio2dB[100] = {
1159 /*	 0   1   2   3   4   5   6   7   8   9 */
1160 	0, 0, 6, 10, 12, 14, 16, 17, 18, 19,	/* 00 - 09 */
1161 	20, 21, 22, 22, 23, 23, 24, 25, 26, 26,	/* 10 - 19 */
1162 	26, 26, 26, 27, 27, 28, 28, 28, 29, 29,	/* 20 - 29 */
1163 	29, 30, 30, 30, 31, 31, 31, 31, 32, 32,	/* 30 - 39 */
1164 	32, 32, 32, 33, 33, 33, 33, 33, 34, 34,	/* 40 - 49 */
1165 	34, 34, 34, 34, 35, 35, 35, 35, 35, 35,	/* 50 - 59 */
1166 	36, 36, 36, 36, 36, 36, 36, 37, 37, 37,	/* 60 - 69 */
1167 	37, 37, 37, 37, 37, 38, 38, 38, 38, 38,	/* 70 - 79 */
1168 	38, 38, 38, 38, 38, 39, 39, 39, 39, 39,	/* 80 - 89 */
1169 	39, 39, 39, 39, 39, 40, 40, 40, 40, 40	/* 90 - 99 */
1170 };
1171 
1172 /* Calculates a relative dB value from a ratio of linear
1173  *   (i.e. not dB) signal levels.
1174  * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
1175 int
1176 il3945_calc_db_from_ratio(int sig_ratio)
1177 {
1178 	/* 1000:1 or higher just report as 60 dB */
1179 	if (sig_ratio >= 1000)
1180 		return 60;
1181 
1182 	/* 100:1 or higher, divide by 10 and use table,
1183 	 *   add 20 dB to make up for divide by 10 */
1184 	if (sig_ratio >= 100)
1185 		return 20 + (int)ratio2dB[sig_ratio / 10];
1186 
1187 	/* We shouldn't see this */
1188 	if (sig_ratio < 1)
1189 		return 0;
1190 
1191 	/* Use table for ratios 1:1 - 99:1 */
1192 	return (int)ratio2dB[sig_ratio];
1193 }
1194 
1195 /**
1196  * il3945_rx_handle - Main entry function for receiving responses from uCode
1197  *
1198  * Uses the il->handlers callback function array to invoke
1199  * the appropriate handlers, including command responses,
1200  * frame-received notifications, and other notifications.
1201  */
1202 static void
1203 il3945_rx_handle(struct il_priv *il)
1204 {
1205 	struct il_rx_buf *rxb;
1206 	struct il_rx_pkt *pkt;
1207 	struct il_rx_queue *rxq = &il->rxq;
1208 	u32 r, i;
1209 	int reclaim;
1210 	unsigned long flags;
1211 	u8 fill_rx = 0;
1212 	u32 count = 8;
1213 	int total_empty = 0;
1214 
1215 	/* uCode's read idx (stored in shared DRAM) indicates the last Rx
1216 	 * buffer that the driver may process (last buffer filled by ucode). */
1217 	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
1218 	i = rxq->read;
1219 
1220 	/* calculate total frames need to be restock after handling RX */
1221 	total_empty = r - rxq->write_actual;
1222 	if (total_empty < 0)
1223 		total_empty += RX_QUEUE_SIZE;
1224 
1225 	if (total_empty > (RX_QUEUE_SIZE / 2))
1226 		fill_rx = 1;
1227 	/* Rx interrupt, but nothing sent from uCode */
1228 	if (i == r)
1229 		D_RX("r = %d, i = %d\n", r, i);
1230 
1231 	while (i != r) {
1232 		int len;
1233 
1234 		rxb = rxq->queue[i];
1235 
1236 		/* If an RXB doesn't have a Rx queue slot associated with it,
1237 		 * then a bug has been introduced in the queue refilling
1238 		 * routines -- catch it here */
1239 		BUG_ON(rxb == NULL);
1240 
1241 		rxq->queue[i] = NULL;
1242 
1243 		pci_unmap_page(il->pci_dev, rxb->page_dma,
1244 			       PAGE_SIZE << il->hw_params.rx_page_order,
1245 			       PCI_DMA_FROMDEVICE);
1246 		pkt = rxb_addr(rxb);
1247 
1248 		len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
1249 		len += sizeof(u32);	/* account for status word */
1250 
1251 		reclaim = il_need_reclaim(il, pkt);
1252 
1253 		/* Based on type of command response or notification,
1254 		 *   handle those that need handling via function in
1255 		 *   handlers table.  See il3945_setup_handlers() */
1256 		if (il->handlers[pkt->hdr.cmd]) {
1257 			D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
1258 			     il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1259 			il->isr_stats.handlers[pkt->hdr.cmd]++;
1260 			il->handlers[pkt->hdr.cmd] (il, rxb);
1261 		} else {
1262 			/* No handling needed */
1263 			D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
1264 			     i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1265 		}
1266 
1267 		/*
1268 		 * XXX: After here, we should always check rxb->page
1269 		 * against NULL before touching it or its virtual
1270 		 * memory (pkt). Because some handler might have
1271 		 * already taken or freed the pages.
1272 		 */
1273 
1274 		if (reclaim) {
1275 			/* Invoke any callbacks, transfer the buffer to caller,
1276 			 * and fire off the (possibly) blocking il_send_cmd()
1277 			 * as we reclaim the driver command queue */
1278 			if (rxb->page)
1279 				il_tx_cmd_complete(il, rxb);
1280 			else
1281 				IL_WARN("Claim null rxb?\n");
1282 		}
1283 
1284 		/* Reuse the page if possible. For notification packets and
1285 		 * SKBs that fail to Rx correctly, add them back into the
1286 		 * rx_free list for reuse later. */
1287 		spin_lock_irqsave(&rxq->lock, flags);
1288 		if (rxb->page != NULL) {
1289 			rxb->page_dma =
1290 			    pci_map_page(il->pci_dev, rxb->page, 0,
1291 					 PAGE_SIZE << il->hw_params.
1292 					 rx_page_order, PCI_DMA_FROMDEVICE);
1293 			if (unlikely(pci_dma_mapping_error(il->pci_dev,
1294 							   rxb->page_dma))) {
1295 				__il_free_pages(il, rxb->page);
1296 				rxb->page = NULL;
1297 				list_add_tail(&rxb->list, &rxq->rx_used);
1298 			} else {
1299 				list_add_tail(&rxb->list, &rxq->rx_free);
1300 				rxq->free_count++;
1301 			}
1302 		} else
1303 			list_add_tail(&rxb->list, &rxq->rx_used);
1304 
1305 		spin_unlock_irqrestore(&rxq->lock, flags);
1306 
1307 		i = (i + 1) & RX_QUEUE_MASK;
1308 		/* If there are a lot of unused frames,
1309 		 * restock the Rx queue so ucode won't assert. */
1310 		if (fill_rx) {
1311 			count++;
1312 			if (count >= 8) {
1313 				rxq->read = i;
1314 				il3945_rx_replenish_now(il);
1315 				count = 0;
1316 			}
1317 		}
1318 	}
1319 
1320 	/* Backtrack one entry */
1321 	rxq->read = i;
1322 	if (fill_rx)
1323 		il3945_rx_replenish_now(il);
1324 	else
1325 		il3945_rx_queue_restock(il);
1326 }
1327 
1328 /* call this function to flush any scheduled tasklet */
1329 static inline void
1330 il3945_synchronize_irq(struct il_priv *il)
1331 {
1332 	/* wait to make sure we flush pending tasklet */
1333 	synchronize_irq(il->pci_dev->irq);
1334 	tasklet_kill(&il->irq_tasklet);
1335 }
1336 
1337 static const char *
1338 il3945_desc_lookup(int i)
1339 {
1340 	switch (i) {
1341 	case 1:
1342 		return "FAIL";
1343 	case 2:
1344 		return "BAD_PARAM";
1345 	case 3:
1346 		return "BAD_CHECKSUM";
1347 	case 4:
1348 		return "NMI_INTERRUPT";
1349 	case 5:
1350 		return "SYSASSERT";
1351 	case 6:
1352 		return "FATAL_ERROR";
1353 	}
1354 
1355 	return "UNKNOWN";
1356 }
1357 
1358 #define ERROR_START_OFFSET  (1 * sizeof(u32))
1359 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
1360 
1361 void
1362 il3945_dump_nic_error_log(struct il_priv *il)
1363 {
1364 	u32 i;
1365 	u32 desc, time, count, base, data1;
1366 	u32 blink1, blink2, ilink1, ilink2;
1367 
1368 	base = le32_to_cpu(il->card_alive.error_event_table_ptr);
1369 
1370 	if (!il3945_hw_valid_rtc_data_addr(base)) {
1371 		IL_ERR("Not valid error log pointer 0x%08X\n", base);
1372 		return;
1373 	}
1374 
1375 	count = il_read_targ_mem(il, base);
1376 
1377 	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1378 		IL_ERR("Start IWL Error Log Dump:\n");
1379 		IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
1380 	}
1381 
1382 	IL_ERR("Desc       Time       asrtPC  blink2 "
1383 	       "ilink1  nmiPC   Line\n");
1384 	for (i = ERROR_START_OFFSET;
1385 	     i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
1386 	     i += ERROR_ELEM_SIZE) {
1387 		desc = il_read_targ_mem(il, base + i);
1388 		time = il_read_targ_mem(il, base + i + 1 * sizeof(u32));
1389 		blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32));
1390 		blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32));
1391 		ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32));
1392 		ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32));
1393 		data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32));
1394 
1395 		IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
1396 		       il3945_desc_lookup(desc), desc, time, blink1, blink2,
1397 		       ilink1, ilink2, data1);
1398 	}
1399 }
1400 
1401 static void
1402 il3945_irq_tasklet(struct il_priv *il)
1403 {
1404 	u32 inta, handled = 0;
1405 	u32 inta_fh;
1406 	unsigned long flags;
1407 #ifdef CONFIG_IWLEGACY_DEBUG
1408 	u32 inta_mask;
1409 #endif
1410 
1411 	spin_lock_irqsave(&il->lock, flags);
1412 
1413 	/* Ack/clear/reset pending uCode interrupts.
1414 	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1415 	 *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
1416 	inta = _il_rd(il, CSR_INT);
1417 	_il_wr(il, CSR_INT, inta);
1418 
1419 	/* Ack/clear/reset pending flow-handler (DMA) interrupts.
1420 	 * Any new interrupts that happen after this, either while we're
1421 	 * in this tasklet, or later, will show up in next ISR/tasklet. */
1422 	inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1423 	_il_wr(il, CSR_FH_INT_STATUS, inta_fh);
1424 
1425 #ifdef CONFIG_IWLEGACY_DEBUG
1426 	if (il_get_debug_level(il) & IL_DL_ISR) {
1427 		/* just for debug */
1428 		inta_mask = _il_rd(il, CSR_INT_MASK);
1429 		D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
1430 		      inta_mask, inta_fh);
1431 	}
1432 #endif
1433 
1434 	spin_unlock_irqrestore(&il->lock, flags);
1435 
1436 	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1437 	 * atomic, make sure that inta covers all the interrupts that
1438 	 * we've discovered, even if FH interrupt came in just after
1439 	 * reading CSR_INT. */
1440 	if (inta_fh & CSR39_FH_INT_RX_MASK)
1441 		inta |= CSR_INT_BIT_FH_RX;
1442 	if (inta_fh & CSR39_FH_INT_TX_MASK)
1443 		inta |= CSR_INT_BIT_FH_TX;
1444 
1445 	/* Now service all interrupt bits discovered above. */
1446 	if (inta & CSR_INT_BIT_HW_ERR) {
1447 		IL_ERR("Hardware error detected.  Restarting.\n");
1448 
1449 		/* Tell the device to stop sending interrupts */
1450 		il_disable_interrupts(il);
1451 
1452 		il->isr_stats.hw++;
1453 		il_irq_handle_error(il);
1454 
1455 		handled |= CSR_INT_BIT_HW_ERR;
1456 
1457 		return;
1458 	}
1459 #ifdef CONFIG_IWLEGACY_DEBUG
1460 	if (il_get_debug_level(il) & (IL_DL_ISR)) {
1461 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
1462 		if (inta & CSR_INT_BIT_SCD) {
1463 			D_ISR("Scheduler finished to transmit "
1464 			      "the frame/frames.\n");
1465 			il->isr_stats.sch++;
1466 		}
1467 
1468 		/* Alive notification via Rx interrupt will do the real work */
1469 		if (inta & CSR_INT_BIT_ALIVE) {
1470 			D_ISR("Alive interrupt\n");
1471 			il->isr_stats.alive++;
1472 		}
1473 	}
1474 #endif
1475 	/* Safely ignore these bits for debug checks below */
1476 	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1477 
1478 	/* Error detected by uCode */
1479 	if (inta & CSR_INT_BIT_SW_ERR) {
1480 		IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n",
1481 		       inta);
1482 		il->isr_stats.sw++;
1483 		il_irq_handle_error(il);
1484 		handled |= CSR_INT_BIT_SW_ERR;
1485 	}
1486 
1487 	/* uCode wakes up after power-down sleep */
1488 	if (inta & CSR_INT_BIT_WAKEUP) {
1489 		D_ISR("Wakeup interrupt\n");
1490 		il_rx_queue_update_write_ptr(il, &il->rxq);
1491 
1492 		spin_lock_irqsave(&il->lock, flags);
1493 		il_txq_update_write_ptr(il, &il->txq[0]);
1494 		il_txq_update_write_ptr(il, &il->txq[1]);
1495 		il_txq_update_write_ptr(il, &il->txq[2]);
1496 		il_txq_update_write_ptr(il, &il->txq[3]);
1497 		il_txq_update_write_ptr(il, &il->txq[4]);
1498 		spin_unlock_irqrestore(&il->lock, flags);
1499 
1500 		il->isr_stats.wakeup++;
1501 		handled |= CSR_INT_BIT_WAKEUP;
1502 	}
1503 
1504 	/* All uCode command responses, including Tx command responses,
1505 	 * Rx "responses" (frame-received notification), and other
1506 	 * notifications from uCode come through here*/
1507 	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1508 		il3945_rx_handle(il);
1509 		il->isr_stats.rx++;
1510 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1511 	}
1512 
1513 	if (inta & CSR_INT_BIT_FH_TX) {
1514 		D_ISR("Tx interrupt\n");
1515 		il->isr_stats.tx++;
1516 
1517 		_il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
1518 		il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0);
1519 		handled |= CSR_INT_BIT_FH_TX;
1520 	}
1521 
1522 	if (inta & ~handled) {
1523 		IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
1524 		il->isr_stats.unhandled++;
1525 	}
1526 
1527 	if (inta & ~il->inta_mask) {
1528 		IL_WARN("Disabled INTA bits 0x%08x were pending\n",
1529 			inta & ~il->inta_mask);
1530 		IL_WARN("   with inta_fh = 0x%08x\n", inta_fh);
1531 	}
1532 
1533 	/* Re-enable all interrupts */
1534 	/* only Re-enable if disabled by irq */
1535 	if (test_bit(S_INT_ENABLED, &il->status))
1536 		il_enable_interrupts(il);
1537 
1538 #ifdef CONFIG_IWLEGACY_DEBUG
1539 	if (il_get_debug_level(il) & (IL_DL_ISR)) {
1540 		inta = _il_rd(il, CSR_INT);
1541 		inta_mask = _il_rd(il, CSR_INT_MASK);
1542 		inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1543 		D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1544 		      "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1545 	}
1546 #endif
1547 }
1548 
1549 static int
1550 il3945_get_channels_for_scan(struct il_priv *il, enum nl80211_band band,
1551 			     u8 is_active, u8 n_probes,
1552 			     struct il3945_scan_channel *scan_ch,
1553 			     struct ieee80211_vif *vif)
1554 {
1555 	struct ieee80211_channel *chan;
1556 	const struct ieee80211_supported_band *sband;
1557 	const struct il_channel_info *ch_info;
1558 	u16 passive_dwell = 0;
1559 	u16 active_dwell = 0;
1560 	int added, i;
1561 
1562 	sband = il_get_hw_mode(il, band);
1563 	if (!sband)
1564 		return 0;
1565 
1566 	active_dwell = il_get_active_dwell_time(il, band, n_probes);
1567 	passive_dwell = il_get_passive_dwell_time(il, band, vif);
1568 
1569 	if (passive_dwell <= active_dwell)
1570 		passive_dwell = active_dwell + 1;
1571 
1572 	for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
1573 		chan = il->scan_request->channels[i];
1574 
1575 		if (chan->band != band)
1576 			continue;
1577 
1578 		scan_ch->channel = chan->hw_value;
1579 
1580 		ch_info = il_get_channel_info(il, band, scan_ch->channel);
1581 		if (!il_is_channel_valid(ch_info)) {
1582 			D_SCAN("Channel %d is INVALID for this band.\n",
1583 			       scan_ch->channel);
1584 			continue;
1585 		}
1586 
1587 		scan_ch->active_dwell = cpu_to_le16(active_dwell);
1588 		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1589 		/* If passive , set up for auto-switch
1590 		 *  and use long active_dwell time.
1591 		 */
1592 		if (!is_active || il_is_channel_passive(ch_info) ||
1593 		    (chan->flags & IEEE80211_CHAN_NO_IR)) {
1594 			scan_ch->type = 0;	/* passive */
1595 			if (IL_UCODE_API(il->ucode_ver) == 1)
1596 				scan_ch->active_dwell =
1597 				    cpu_to_le16(passive_dwell - 1);
1598 		} else {
1599 			scan_ch->type = 1;	/* active */
1600 		}
1601 
1602 		/* Set direct probe bits. These may be used both for active
1603 		 * scan channels (probes gets sent right away),
1604 		 * or for passive channels (probes get se sent only after
1605 		 * hearing clear Rx packet).*/
1606 		if (IL_UCODE_API(il->ucode_ver) >= 2) {
1607 			if (n_probes)
1608 				scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1609 		} else {
1610 			/* uCode v1 does not allow setting direct probe bits on
1611 			 * passive channel. */
1612 			if ((scan_ch->type & 1) && n_probes)
1613 				scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1614 		}
1615 
1616 		/* Set txpower levels to defaults */
1617 		scan_ch->tpc.dsp_atten = 110;
1618 		/* scan_pwr_info->tpc.dsp_atten; */
1619 
1620 		/*scan_pwr_info->tpc.tx_gain; */
1621 		if (band == NL80211_BAND_5GHZ)
1622 			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
1623 		else {
1624 			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
1625 			/* NOTE: if we were doing 6Mb OFDM for scans we'd use
1626 			 * power level:
1627 			 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
1628 			 */
1629 		}
1630 
1631 		D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel,
1632 		       (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
1633 		       (scan_ch->type & 1) ? active_dwell : passive_dwell);
1634 
1635 		scan_ch++;
1636 		added++;
1637 	}
1638 
1639 	D_SCAN("total channels to scan %d\n", added);
1640 	return added;
1641 }
1642 
1643 static void
1644 il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
1645 {
1646 	int i;
1647 
1648 	for (i = 0; i < RATE_COUNT_LEGACY; i++) {
1649 		rates[i].bitrate = il3945_rates[i].ieee * 5;
1650 		rates[i].hw_value = i;	/* Rate scaling will work on idxes */
1651 		rates[i].hw_value_short = i;
1652 		rates[i].flags = 0;
1653 		if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
1654 			/*
1655 			 * If CCK != 1M then set short preamble rate flag.
1656 			 */
1657 			rates[i].flags |=
1658 			    (il3945_rates[i].plcp ==
1659 			     10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
1660 		}
1661 	}
1662 }
1663 
1664 /******************************************************************************
1665  *
1666  * uCode download functions
1667  *
1668  ******************************************************************************/
1669 
1670 static void
1671 il3945_dealloc_ucode_pci(struct il_priv *il)
1672 {
1673 	il_free_fw_desc(il->pci_dev, &il->ucode_code);
1674 	il_free_fw_desc(il->pci_dev, &il->ucode_data);
1675 	il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
1676 	il_free_fw_desc(il->pci_dev, &il->ucode_init);
1677 	il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
1678 	il_free_fw_desc(il->pci_dev, &il->ucode_boot);
1679 }
1680 
1681 /**
1682  * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
1683  *     looking at all data.
1684  */
1685 static int
1686 il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len)
1687 {
1688 	u32 val;
1689 	u32 save_len = len;
1690 	int rc = 0;
1691 	u32 errcnt;
1692 
1693 	D_INFO("ucode inst image size is %u\n", len);
1694 
1695 	il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND);
1696 
1697 	errcnt = 0;
1698 	for (; len > 0; len -= sizeof(u32), image++) {
1699 		/* read data comes through single port, auto-incr addr */
1700 		/* NOTE: Use the debugless read so we don't flood kernel log
1701 		 * if IL_DL_IO is set */
1702 		val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1703 		if (val != le32_to_cpu(*image)) {
1704 			IL_ERR("uCode INST section is invalid at "
1705 			       "offset 0x%x, is 0x%x, s/b 0x%x\n",
1706 			       save_len - len, val, le32_to_cpu(*image));
1707 			rc = -EIO;
1708 			errcnt++;
1709 			if (errcnt >= 20)
1710 				break;
1711 		}
1712 	}
1713 
1714 	if (!errcnt)
1715 		D_INFO("ucode image in INSTRUCTION memory is good\n");
1716 
1717 	return rc;
1718 }
1719 
1720 /**
1721  * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
1722  *   using sample data 100 bytes apart.  If these sample points are good,
1723  *   it's a pretty good bet that everything between them is good, too.
1724  */
1725 static int
1726 il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len)
1727 {
1728 	u32 val;
1729 	int rc = 0;
1730 	u32 errcnt = 0;
1731 	u32 i;
1732 
1733 	D_INFO("ucode inst image size is %u\n", len);
1734 
1735 	for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) {
1736 		/* read data comes through single port, auto-incr addr */
1737 		/* NOTE: Use the debugless read so we don't flood kernel log
1738 		 * if IL_DL_IO is set */
1739 		il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND);
1740 		val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1741 		if (val != le32_to_cpu(*image)) {
1742 #if 0				/* Enable this if you want to see details */
1743 			IL_ERR("uCode INST section is invalid at "
1744 			       "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val,
1745 			       *image);
1746 #endif
1747 			rc = -EIO;
1748 			errcnt++;
1749 			if (errcnt >= 3)
1750 				break;
1751 		}
1752 	}
1753 
1754 	return rc;
1755 }
1756 
1757 /**
1758  * il3945_verify_ucode - determine which instruction image is in SRAM,
1759  *    and verify its contents
1760  */
1761 static int
1762 il3945_verify_ucode(struct il_priv *il)
1763 {
1764 	__le32 *image;
1765 	u32 len;
1766 	int rc = 0;
1767 
1768 	/* Try bootstrap */
1769 	image = (__le32 *) il->ucode_boot.v_addr;
1770 	len = il->ucode_boot.len;
1771 	rc = il3945_verify_inst_sparse(il, image, len);
1772 	if (rc == 0) {
1773 		D_INFO("Bootstrap uCode is good in inst SRAM\n");
1774 		return 0;
1775 	}
1776 
1777 	/* Try initialize */
1778 	image = (__le32 *) il->ucode_init.v_addr;
1779 	len = il->ucode_init.len;
1780 	rc = il3945_verify_inst_sparse(il, image, len);
1781 	if (rc == 0) {
1782 		D_INFO("Initialize uCode is good in inst SRAM\n");
1783 		return 0;
1784 	}
1785 
1786 	/* Try runtime/protocol */
1787 	image = (__le32 *) il->ucode_code.v_addr;
1788 	len = il->ucode_code.len;
1789 	rc = il3945_verify_inst_sparse(il, image, len);
1790 	if (rc == 0) {
1791 		D_INFO("Runtime uCode is good in inst SRAM\n");
1792 		return 0;
1793 	}
1794 
1795 	IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
1796 
1797 	/* Since nothing seems to match, show first several data entries in
1798 	 * instruction SRAM, so maybe visual inspection will give a clue.
1799 	 * Selection of bootstrap image (vs. other images) is arbitrary. */
1800 	image = (__le32 *) il->ucode_boot.v_addr;
1801 	len = il->ucode_boot.len;
1802 	rc = il3945_verify_inst_full(il, image, len);
1803 
1804 	return rc;
1805 }
1806 
1807 static void
1808 il3945_nic_start(struct il_priv *il)
1809 {
1810 	/* Remove all resets to allow NIC to operate */
1811 	_il_wr(il, CSR_RESET, 0);
1812 }
1813 
1814 #define IL3945_UCODE_GET(item)						\
1815 static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
1816 {									\
1817 	return le32_to_cpu(ucode->v1.item);				\
1818 }
1819 
1820 static u32
1821 il3945_ucode_get_header_size(u32 api_ver)
1822 {
1823 	return 24;
1824 }
1825 
1826 static u8 *
1827 il3945_ucode_get_data(const struct il_ucode_header *ucode)
1828 {
1829 	return (u8 *) ucode->v1.data;
1830 }
1831 
1832 IL3945_UCODE_GET(inst_size);
1833 IL3945_UCODE_GET(data_size);
1834 IL3945_UCODE_GET(init_size);
1835 IL3945_UCODE_GET(init_data_size);
1836 IL3945_UCODE_GET(boot_size);
1837 
1838 /**
1839  * il3945_read_ucode - Read uCode images from disk file.
1840  *
1841  * Copy into buffers for card to fetch via bus-mastering
1842  */
1843 static int
1844 il3945_read_ucode(struct il_priv *il)
1845 {
1846 	const struct il_ucode_header *ucode;
1847 	int ret = -EINVAL, idx;
1848 	const struct firmware *ucode_raw;
1849 	/* firmware file name contains uCode/driver compatibility version */
1850 	const char *name_pre = il->cfg->fw_name_pre;
1851 	const unsigned int api_max = il->cfg->ucode_api_max;
1852 	const unsigned int api_min = il->cfg->ucode_api_min;
1853 	char buf[25];
1854 	u8 *src;
1855 	size_t len;
1856 	u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
1857 
1858 	/* Ask kernel firmware_class module to get the boot firmware off disk.
1859 	 * request_firmware() is synchronous, file is in memory on return. */
1860 	for (idx = api_max; idx >= api_min; idx--) {
1861 		sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
1862 		ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
1863 		if (ret < 0) {
1864 			IL_ERR("%s firmware file req failed: %d\n", buf, ret);
1865 			if (ret == -ENOENT)
1866 				continue;
1867 			else
1868 				goto error;
1869 		} else {
1870 			if (idx < api_max)
1871 				IL_ERR("Loaded firmware %s, "
1872 				       "which is deprecated. "
1873 				       " Please use API v%u instead.\n", buf,
1874 				       api_max);
1875 			D_INFO("Got firmware '%s' file "
1876 			       "(%zd bytes) from disk\n", buf, ucode_raw->size);
1877 			break;
1878 		}
1879 	}
1880 
1881 	if (ret < 0)
1882 		goto error;
1883 
1884 	/* Make sure that we got at least our header! */
1885 	if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
1886 		IL_ERR("File size way too small!\n");
1887 		ret = -EINVAL;
1888 		goto err_release;
1889 	}
1890 
1891 	/* Data from ucode file:  header followed by uCode images */
1892 	ucode = (struct il_ucode_header *)ucode_raw->data;
1893 
1894 	il->ucode_ver = le32_to_cpu(ucode->ver);
1895 	api_ver = IL_UCODE_API(il->ucode_ver);
1896 	inst_size = il3945_ucode_get_inst_size(ucode);
1897 	data_size = il3945_ucode_get_data_size(ucode);
1898 	init_size = il3945_ucode_get_init_size(ucode);
1899 	init_data_size = il3945_ucode_get_init_data_size(ucode);
1900 	boot_size = il3945_ucode_get_boot_size(ucode);
1901 	src = il3945_ucode_get_data(ucode);
1902 
1903 	/* api_ver should match the api version forming part of the
1904 	 * firmware filename ... but we don't check for that and only rely
1905 	 * on the API version read from firmware header from here on forward */
1906 
1907 	if (api_ver < api_min || api_ver > api_max) {
1908 		IL_ERR("Driver unable to support your firmware API. "
1909 		       "Driver supports v%u, firmware is v%u.\n", api_max,
1910 		       api_ver);
1911 		il->ucode_ver = 0;
1912 		ret = -EINVAL;
1913 		goto err_release;
1914 	}
1915 	if (api_ver != api_max)
1916 		IL_ERR("Firmware has old API version. Expected %u, "
1917 		       "got %u. New firmware can be obtained "
1918 		       "from http://www.intellinuxwireless.org.\n", api_max,
1919 		       api_ver);
1920 
1921 	IL_INFO("loaded firmware version %u.%u.%u.%u\n",
1922 		IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
1923 		IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
1924 
1925 	snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
1926 		 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
1927 		 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
1928 		 IL_UCODE_SERIAL(il->ucode_ver));
1929 
1930 	D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
1931 	D_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
1932 	D_INFO("f/w package hdr runtime data size = %u\n", data_size);
1933 	D_INFO("f/w package hdr init inst size = %u\n", init_size);
1934 	D_INFO("f/w package hdr init data size = %u\n", init_data_size);
1935 	D_INFO("f/w package hdr boot inst size = %u\n", boot_size);
1936 
1937 	/* Verify size of file vs. image size info in file's header */
1938 	if (ucode_raw->size !=
1939 	    il3945_ucode_get_header_size(api_ver) + inst_size + data_size +
1940 	    init_size + init_data_size + boot_size) {
1941 
1942 		D_INFO("uCode file size %zd does not match expected size\n",
1943 		       ucode_raw->size);
1944 		ret = -EINVAL;
1945 		goto err_release;
1946 	}
1947 
1948 	/* Verify that uCode images will fit in card's SRAM */
1949 	if (inst_size > IL39_MAX_INST_SIZE) {
1950 		D_INFO("uCode instr len %d too large to fit in\n", inst_size);
1951 		ret = -EINVAL;
1952 		goto err_release;
1953 	}
1954 
1955 	if (data_size > IL39_MAX_DATA_SIZE) {
1956 		D_INFO("uCode data len %d too large to fit in\n", data_size);
1957 		ret = -EINVAL;
1958 		goto err_release;
1959 	}
1960 	if (init_size > IL39_MAX_INST_SIZE) {
1961 		D_INFO("uCode init instr len %d too large to fit in\n",
1962 		       init_size);
1963 		ret = -EINVAL;
1964 		goto err_release;
1965 	}
1966 	if (init_data_size > IL39_MAX_DATA_SIZE) {
1967 		D_INFO("uCode init data len %d too large to fit in\n",
1968 		       init_data_size);
1969 		ret = -EINVAL;
1970 		goto err_release;
1971 	}
1972 	if (boot_size > IL39_MAX_BSM_SIZE) {
1973 		D_INFO("uCode boot instr len %d too large to fit in\n",
1974 		       boot_size);
1975 		ret = -EINVAL;
1976 		goto err_release;
1977 	}
1978 
1979 	/* Allocate ucode buffers for card's bus-master loading ... */
1980 
1981 	/* Runtime instructions and 2 copies of data:
1982 	 * 1) unmodified from disk
1983 	 * 2) backup cache for save/restore during power-downs */
1984 	il->ucode_code.len = inst_size;
1985 	il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
1986 
1987 	il->ucode_data.len = data_size;
1988 	il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
1989 
1990 	il->ucode_data_backup.len = data_size;
1991 	il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
1992 
1993 	if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
1994 	    !il->ucode_data_backup.v_addr)
1995 		goto err_pci_alloc;
1996 
1997 	/* Initialization instructions and data */
1998 	if (init_size && init_data_size) {
1999 		il->ucode_init.len = init_size;
2000 		il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
2001 
2002 		il->ucode_init_data.len = init_data_size;
2003 		il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
2004 
2005 		if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
2006 			goto err_pci_alloc;
2007 	}
2008 
2009 	/* Bootstrap (instructions only, no data) */
2010 	if (boot_size) {
2011 		il->ucode_boot.len = boot_size;
2012 		il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
2013 
2014 		if (!il->ucode_boot.v_addr)
2015 			goto err_pci_alloc;
2016 	}
2017 
2018 	/* Copy images into buffers for card's bus-master reads ... */
2019 
2020 	/* Runtime instructions (first block of data in file) */
2021 	len = inst_size;
2022 	D_INFO("Copying (but not loading) uCode instr len %zd\n", len);
2023 	memcpy(il->ucode_code.v_addr, src, len);
2024 	src += len;
2025 
2026 	D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
2027 	       il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
2028 
2029 	/* Runtime data (2nd block)
2030 	 * NOTE:  Copy into backup buffer will be done in il3945_up()  */
2031 	len = data_size;
2032 	D_INFO("Copying (but not loading) uCode data len %zd\n", len);
2033 	memcpy(il->ucode_data.v_addr, src, len);
2034 	memcpy(il->ucode_data_backup.v_addr, src, len);
2035 	src += len;
2036 
2037 	/* Initialization instructions (3rd block) */
2038 	if (init_size) {
2039 		len = init_size;
2040 		D_INFO("Copying (but not loading) init instr len %zd\n", len);
2041 		memcpy(il->ucode_init.v_addr, src, len);
2042 		src += len;
2043 	}
2044 
2045 	/* Initialization data (4th block) */
2046 	if (init_data_size) {
2047 		len = init_data_size;
2048 		D_INFO("Copying (but not loading) init data len %zd\n", len);
2049 		memcpy(il->ucode_init_data.v_addr, src, len);
2050 		src += len;
2051 	}
2052 
2053 	/* Bootstrap instructions (5th block) */
2054 	len = boot_size;
2055 	D_INFO("Copying (but not loading) boot instr len %zd\n", len);
2056 	memcpy(il->ucode_boot.v_addr, src, len);
2057 
2058 	/* We have our copies now, allow OS release its copies */
2059 	release_firmware(ucode_raw);
2060 	return 0;
2061 
2062 err_pci_alloc:
2063 	IL_ERR("failed to allocate pci memory\n");
2064 	ret = -ENOMEM;
2065 	il3945_dealloc_ucode_pci(il);
2066 
2067 err_release:
2068 	release_firmware(ucode_raw);
2069 
2070 error:
2071 	return ret;
2072 }
2073 
2074 /**
2075  * il3945_set_ucode_ptrs - Set uCode address location
2076  *
2077  * Tell initialization uCode where to find runtime uCode.
2078  *
2079  * BSM registers initially contain pointers to initialization uCode.
2080  * We need to replace them to load runtime uCode inst and data,
2081  * and to save runtime data when powering down.
2082  */
2083 static int
2084 il3945_set_ucode_ptrs(struct il_priv *il)
2085 {
2086 	dma_addr_t pinst;
2087 	dma_addr_t pdata;
2088 
2089 	/* bits 31:0 for 3945 */
2090 	pinst = il->ucode_code.p_addr;
2091 	pdata = il->ucode_data_backup.p_addr;
2092 
2093 	/* Tell bootstrap uCode where to find image to load */
2094 	il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
2095 	il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
2096 	il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len);
2097 
2098 	/* Inst byte count must be last to set up, bit 31 signals uCode
2099 	 *   that all new ptr/size info is in place */
2100 	il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
2101 		   il->ucode_code.len | BSM_DRAM_INST_LOAD);
2102 
2103 	D_INFO("Runtime uCode pointers are set.\n");
2104 
2105 	return 0;
2106 }
2107 
2108 /**
2109  * il3945_init_alive_start - Called after N_ALIVE notification received
2110  *
2111  * Called after N_ALIVE notification received from "initialize" uCode.
2112  *
2113  * Tell "initialize" uCode to go ahead and load the runtime uCode.
2114  */
2115 static void
2116 il3945_init_alive_start(struct il_priv *il)
2117 {
2118 	/* Check alive response for "valid" sign from uCode */
2119 	if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
2120 		/* We had an error bringing up the hardware, so take it
2121 		 * all the way back down so we can try again */
2122 		D_INFO("Initialize Alive failed.\n");
2123 		goto restart;
2124 	}
2125 
2126 	/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
2127 	 * This is a paranoid check, because we would not have gotten the
2128 	 * "initialize" alive if code weren't properly loaded.  */
2129 	if (il3945_verify_ucode(il)) {
2130 		/* Runtime instruction load was bad;
2131 		 * take it all the way back down so we can try again */
2132 		D_INFO("Bad \"initialize\" uCode load.\n");
2133 		goto restart;
2134 	}
2135 
2136 	/* Send pointers to protocol/runtime uCode image ... init code will
2137 	 * load and launch runtime uCode, which will send us another "Alive"
2138 	 * notification. */
2139 	D_INFO("Initialization Alive received.\n");
2140 	if (il3945_set_ucode_ptrs(il)) {
2141 		/* Runtime instruction load won't happen;
2142 		 * take it all the way back down so we can try again */
2143 		D_INFO("Couldn't set up uCode pointers.\n");
2144 		goto restart;
2145 	}
2146 	return;
2147 
2148 restart:
2149 	queue_work(il->workqueue, &il->restart);
2150 }
2151 
2152 /**
2153  * il3945_alive_start - called after N_ALIVE notification received
2154  *                   from protocol/runtime uCode (initialization uCode's
2155  *                   Alive gets handled by il3945_init_alive_start()).
2156  */
2157 static void
2158 il3945_alive_start(struct il_priv *il)
2159 {
2160 	int thermal_spin = 0;
2161 	u32 rfkill;
2162 
2163 	D_INFO("Runtime Alive received.\n");
2164 
2165 	if (il->card_alive.is_valid != UCODE_VALID_OK) {
2166 		/* We had an error bringing up the hardware, so take it
2167 		 * all the way back down so we can try again */
2168 		D_INFO("Alive failed.\n");
2169 		goto restart;
2170 	}
2171 
2172 	/* Initialize uCode has loaded Runtime uCode ... verify inst image.
2173 	 * This is a paranoid check, because we would not have gotten the
2174 	 * "runtime" alive if code weren't properly loaded.  */
2175 	if (il3945_verify_ucode(il)) {
2176 		/* Runtime instruction load was bad;
2177 		 * take it all the way back down so we can try again */
2178 		D_INFO("Bad runtime uCode load.\n");
2179 		goto restart;
2180 	}
2181 
2182 	rfkill = il_rd_prph(il, APMG_RFKILL_REG);
2183 	D_INFO("RFKILL status: 0x%x\n", rfkill);
2184 
2185 	if (rfkill & 0x1) {
2186 		clear_bit(S_RFKILL, &il->status);
2187 		/* if RFKILL is not on, then wait for thermal
2188 		 * sensor in adapter to kick in */
2189 		while (il3945_hw_get_temperature(il) == 0) {
2190 			thermal_spin++;
2191 			udelay(10);
2192 		}
2193 
2194 		if (thermal_spin)
2195 			D_INFO("Thermal calibration took %dus\n",
2196 			       thermal_spin * 10);
2197 	} else
2198 		set_bit(S_RFKILL, &il->status);
2199 
2200 	/* After the ALIVE response, we can send commands to 3945 uCode */
2201 	set_bit(S_ALIVE, &il->status);
2202 
2203 	/* Enable watchdog to monitor the driver tx queues */
2204 	il_setup_watchdog(il);
2205 
2206 	if (il_is_rfkill(il))
2207 		return;
2208 
2209 	ieee80211_wake_queues(il->hw);
2210 
2211 	il->active_rate = RATES_MASK_3945;
2212 
2213 	il_power_update_mode(il, true);
2214 
2215 	if (il_is_associated(il)) {
2216 		struct il3945_rxon_cmd *active_rxon =
2217 		    (struct il3945_rxon_cmd *)(&il->active);
2218 
2219 		il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2220 		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2221 	} else {
2222 		/* Initialize our rx_config data */
2223 		il_connection_init_rx_config(il);
2224 	}
2225 
2226 	/* Configure Bluetooth device coexistence support */
2227 	il_send_bt_config(il);
2228 
2229 	set_bit(S_READY, &il->status);
2230 
2231 	/* Configure the adapter for unassociated operation */
2232 	il3945_commit_rxon(il);
2233 
2234 	il3945_reg_txpower_periodic(il);
2235 
2236 	D_INFO("ALIVE processing complete.\n");
2237 	wake_up(&il->wait_command_queue);
2238 
2239 	return;
2240 
2241 restart:
2242 	queue_work(il->workqueue, &il->restart);
2243 }
2244 
2245 static void il3945_cancel_deferred_work(struct il_priv *il);
2246 
2247 static void
2248 __il3945_down(struct il_priv *il)
2249 {
2250 	unsigned long flags;
2251 	int exit_pending;
2252 
2253 	D_INFO(DRV_NAME " is going down\n");
2254 
2255 	il_scan_cancel_timeout(il, 200);
2256 
2257 	exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
2258 
2259 	/* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
2260 	 * to prevent rearm timer */
2261 	del_timer_sync(&il->watchdog);
2262 
2263 	/* Station information will now be cleared in device */
2264 	il_clear_ucode_stations(il);
2265 	il_dealloc_bcast_stations(il);
2266 	il_clear_driver_stations(il);
2267 
2268 	/* Unblock any waiting calls */
2269 	wake_up_all(&il->wait_command_queue);
2270 
2271 	/* Wipe out the EXIT_PENDING status bit if we are not actually
2272 	 * exiting the module */
2273 	if (!exit_pending)
2274 		clear_bit(S_EXIT_PENDING, &il->status);
2275 
2276 	/* stop and reset the on-board processor */
2277 	_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2278 
2279 	/* tell the device to stop sending interrupts */
2280 	spin_lock_irqsave(&il->lock, flags);
2281 	il_disable_interrupts(il);
2282 	spin_unlock_irqrestore(&il->lock, flags);
2283 	il3945_synchronize_irq(il);
2284 
2285 	if (il->mac80211_registered)
2286 		ieee80211_stop_queues(il->hw);
2287 
2288 	/* If we have not previously called il3945_init() then
2289 	 * clear all bits but the RF Kill bits and return */
2290 	if (!il_is_init(il)) {
2291 		il->status =
2292 		    test_bit(S_RFKILL, &il->status) << S_RFKILL |
2293 		    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2294 		    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2295 		goto exit;
2296 	}
2297 
2298 	/* ...otherwise clear out all the status bits but the RF Kill
2299 	 * bit and continue taking the NIC down. */
2300 	il->status &=
2301 	    test_bit(S_RFKILL, &il->status) << S_RFKILL |
2302 	    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2303 	    test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
2304 	    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2305 
2306 	/*
2307 	 * We disabled and synchronized interrupt, and priv->mutex is taken, so
2308 	 * here is the only thread which will program device registers, but
2309 	 * still have lockdep assertions, so we are taking reg_lock.
2310 	 */
2311 	spin_lock_irq(&il->reg_lock);
2312 	/* FIXME: il_grab_nic_access if rfkill is off ? */
2313 
2314 	il3945_hw_txq_ctx_stop(il);
2315 	il3945_hw_rxq_stop(il);
2316 	/* Power-down device's busmaster DMA clocks */
2317 	_il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2318 	udelay(5);
2319 	/* Stop the device, and put it in low power state */
2320 	_il_apm_stop(il);
2321 
2322 	spin_unlock_irq(&il->reg_lock);
2323 
2324 	il3945_hw_txq_ctx_free(il);
2325 exit:
2326 	memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
2327 
2328 	if (il->beacon_skb)
2329 		dev_kfree_skb(il->beacon_skb);
2330 	il->beacon_skb = NULL;
2331 
2332 	/* clear out any free frames */
2333 	il3945_clear_free_frames(il);
2334 }
2335 
2336 static void
2337 il3945_down(struct il_priv *il)
2338 {
2339 	mutex_lock(&il->mutex);
2340 	__il3945_down(il);
2341 	mutex_unlock(&il->mutex);
2342 
2343 	il3945_cancel_deferred_work(il);
2344 }
2345 
2346 #define MAX_HW_RESTARTS 5
2347 
2348 static int
2349 il3945_alloc_bcast_station(struct il_priv *il)
2350 {
2351 	unsigned long flags;
2352 	u8 sta_id;
2353 
2354 	spin_lock_irqsave(&il->sta_lock, flags);
2355 	sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
2356 	if (sta_id == IL_INVALID_STATION) {
2357 		IL_ERR("Unable to prepare broadcast station\n");
2358 		spin_unlock_irqrestore(&il->sta_lock, flags);
2359 
2360 		return -EINVAL;
2361 	}
2362 
2363 	il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
2364 	il->stations[sta_id].used |= IL_STA_BCAST;
2365 	spin_unlock_irqrestore(&il->sta_lock, flags);
2366 
2367 	return 0;
2368 }
2369 
2370 static int
2371 __il3945_up(struct il_priv *il)
2372 {
2373 	int rc, i;
2374 
2375 	rc = il3945_alloc_bcast_station(il);
2376 	if (rc)
2377 		return rc;
2378 
2379 	if (test_bit(S_EXIT_PENDING, &il->status)) {
2380 		IL_WARN("Exit pending; will not bring the NIC up\n");
2381 		return -EIO;
2382 	}
2383 
2384 	if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
2385 		IL_ERR("ucode not available for device bring up\n");
2386 		return -EIO;
2387 	}
2388 
2389 	/* If platform's RF_KILL switch is NOT set to KILL */
2390 	if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2391 		clear_bit(S_RFKILL, &il->status);
2392 	else {
2393 		set_bit(S_RFKILL, &il->status);
2394 		return -ERFKILL;
2395 	}
2396 
2397 	_il_wr(il, CSR_INT, 0xFFFFFFFF);
2398 
2399 	rc = il3945_hw_nic_init(il);
2400 	if (rc) {
2401 		IL_ERR("Unable to int nic\n");
2402 		return rc;
2403 	}
2404 
2405 	/* make sure rfkill handshake bits are cleared */
2406 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2407 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2408 
2409 	/* clear (again), then enable host interrupts */
2410 	_il_wr(il, CSR_INT, 0xFFFFFFFF);
2411 	il_enable_interrupts(il);
2412 
2413 	/* really make sure rfkill handshake bits are cleared */
2414 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2415 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2416 
2417 	/* Copy original ucode data image from disk into backup cache.
2418 	 * This will be used to initialize the on-board processor's
2419 	 * data SRAM for a clean start when the runtime program first loads. */
2420 	memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
2421 	       il->ucode_data.len);
2422 
2423 	/* We return success when we resume from suspend and rf_kill is on. */
2424 	if (test_bit(S_RFKILL, &il->status))
2425 		return 0;
2426 
2427 	for (i = 0; i < MAX_HW_RESTARTS; i++) {
2428 
2429 		/* load bootstrap state machine,
2430 		 * load bootstrap program into processor's memory,
2431 		 * prepare to load the "initialize" uCode */
2432 		rc = il->ops->load_ucode(il);
2433 
2434 		if (rc) {
2435 			IL_ERR("Unable to set up bootstrap uCode: %d\n", rc);
2436 			continue;
2437 		}
2438 
2439 		/* start card; "initialize" will load runtime ucode */
2440 		il3945_nic_start(il);
2441 
2442 		D_INFO(DRV_NAME " is coming up\n");
2443 
2444 		return 0;
2445 	}
2446 
2447 	set_bit(S_EXIT_PENDING, &il->status);
2448 	__il3945_down(il);
2449 	clear_bit(S_EXIT_PENDING, &il->status);
2450 
2451 	/* tried to restart and config the device for as long as our
2452 	 * patience could withstand */
2453 	IL_ERR("Unable to initialize device after %d attempts.\n", i);
2454 	return -EIO;
2455 }
2456 
2457 /*****************************************************************************
2458  *
2459  * Workqueue callbacks
2460  *
2461  *****************************************************************************/
2462 
2463 static void
2464 il3945_bg_init_alive_start(struct work_struct *data)
2465 {
2466 	struct il_priv *il =
2467 	    container_of(data, struct il_priv, init_alive_start.work);
2468 
2469 	mutex_lock(&il->mutex);
2470 	if (test_bit(S_EXIT_PENDING, &il->status))
2471 		goto out;
2472 
2473 	il3945_init_alive_start(il);
2474 out:
2475 	mutex_unlock(&il->mutex);
2476 }
2477 
2478 static void
2479 il3945_bg_alive_start(struct work_struct *data)
2480 {
2481 	struct il_priv *il =
2482 	    container_of(data, struct il_priv, alive_start.work);
2483 
2484 	mutex_lock(&il->mutex);
2485 	if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
2486 		goto out;
2487 
2488 	il3945_alive_start(il);
2489 out:
2490 	mutex_unlock(&il->mutex);
2491 }
2492 
2493 /*
2494  * 3945 cannot interrupt driver when hardware rf kill switch toggles;
2495  * driver must poll CSR_GP_CNTRL_REG register for change.  This register
2496  * *is* readable even when device has been SW_RESET into low power mode
2497  * (e.g. during RF KILL).
2498  */
2499 static void
2500 il3945_rfkill_poll(struct work_struct *data)
2501 {
2502 	struct il_priv *il =
2503 	    container_of(data, struct il_priv, _3945.rfkill_poll.work);
2504 	bool old_rfkill = test_bit(S_RFKILL, &il->status);
2505 	bool new_rfkill =
2506 	    !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
2507 
2508 	if (new_rfkill != old_rfkill) {
2509 		if (new_rfkill)
2510 			set_bit(S_RFKILL, &il->status);
2511 		else
2512 			clear_bit(S_RFKILL, &il->status);
2513 
2514 		wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
2515 
2516 		D_RF_KILL("RF_KILL bit toggled to %s.\n",
2517 			  new_rfkill ? "disable radio" : "enable radio");
2518 	}
2519 
2520 	/* Keep this running, even if radio now enabled.  This will be
2521 	 * cancelled in mac_start() if system decides to start again */
2522 	queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2523 			   round_jiffies_relative(2 * HZ));
2524 
2525 }
2526 
2527 int
2528 il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
2529 {
2530 	struct il_host_cmd cmd = {
2531 		.id = C_SCAN,
2532 		.len = sizeof(struct il3945_scan_cmd),
2533 		.flags = CMD_SIZE_HUGE,
2534 	};
2535 	struct il3945_scan_cmd *scan;
2536 	u8 n_probes = 0;
2537 	enum nl80211_band band;
2538 	bool is_active = false;
2539 	int ret;
2540 	u16 len;
2541 
2542 	lockdep_assert_held(&il->mutex);
2543 
2544 	if (!il->scan_cmd) {
2545 		il->scan_cmd =
2546 		    kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE,
2547 			    GFP_KERNEL);
2548 		if (!il->scan_cmd) {
2549 			D_SCAN("Fail to allocate scan memory\n");
2550 			return -ENOMEM;
2551 		}
2552 	}
2553 	scan = il->scan_cmd;
2554 	memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);
2555 
2556 	scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
2557 	scan->quiet_time = IL_ACTIVE_QUIET_TIME;
2558 
2559 	if (il_is_associated(il)) {
2560 		u16 interval;
2561 		u32 extra;
2562 		u32 suspend_time = 100;
2563 		u32 scan_suspend_time = 100;
2564 
2565 		D_INFO("Scanning while associated...\n");
2566 
2567 		interval = vif->bss_conf.beacon_int;
2568 
2569 		scan->suspend_time = 0;
2570 		scan->max_out_time = cpu_to_le32(200 * 1024);
2571 		if (!interval)
2572 			interval = suspend_time;
2573 		/*
2574 		 * suspend time format:
2575 		 *  0-19: beacon interval in usec (time before exec.)
2576 		 * 20-23: 0
2577 		 * 24-31: number of beacons (suspend between channels)
2578 		 */
2579 
2580 		extra = (suspend_time / interval) << 24;
2581 		scan_suspend_time =
2582 		    0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024));
2583 
2584 		scan->suspend_time = cpu_to_le32(scan_suspend_time);
2585 		D_SCAN("suspend_time 0x%X beacon interval %d\n",
2586 		       scan_suspend_time, interval);
2587 	}
2588 
2589 	if (il->scan_request->n_ssids) {
2590 		int i, p = 0;
2591 		D_SCAN("Kicking off active scan\n");
2592 		for (i = 0; i < il->scan_request->n_ssids; i++) {
2593 			/* always does wildcard anyway */
2594 			if (!il->scan_request->ssids[i].ssid_len)
2595 				continue;
2596 			scan->direct_scan[p].id = WLAN_EID_SSID;
2597 			scan->direct_scan[p].len =
2598 			    il->scan_request->ssids[i].ssid_len;
2599 			memcpy(scan->direct_scan[p].ssid,
2600 			       il->scan_request->ssids[i].ssid,
2601 			       il->scan_request->ssids[i].ssid_len);
2602 			n_probes++;
2603 			p++;
2604 		}
2605 		is_active = true;
2606 	} else
2607 		D_SCAN("Kicking off passive scan.\n");
2608 
2609 	/* We don't build a direct scan probe request; the uCode will do
2610 	 * that based on the direct_mask added to each channel entry */
2611 	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
2612 	scan->tx_cmd.sta_id = il->hw_params.bcast_id;
2613 	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2614 
2615 	/* flags + rate selection */
2616 
2617 	switch (il->scan_band) {
2618 	case NL80211_BAND_2GHZ:
2619 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
2620 		scan->tx_cmd.rate = RATE_1M_PLCP;
2621 		band = NL80211_BAND_2GHZ;
2622 		break;
2623 	case NL80211_BAND_5GHZ:
2624 		scan->tx_cmd.rate = RATE_6M_PLCP;
2625 		band = NL80211_BAND_5GHZ;
2626 		break;
2627 	default:
2628 		IL_WARN("Invalid scan band\n");
2629 		return -EIO;
2630 	}
2631 
2632 	/*
2633 	 * If active scaning is requested but a certain channel is marked
2634 	 * passive, we can do active scanning if we detect transmissions. For
2635 	 * passive only scanning disable switching to active on any channel.
2636 	 */
2637 	scan->good_CRC_th =
2638 	    is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
2639 
2640 	len =
2641 	    il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
2642 			      vif->addr, il->scan_request->ie,
2643 			      il->scan_request->ie_len,
2644 			      IL_MAX_SCAN_SIZE - sizeof(*scan));
2645 	scan->tx_cmd.len = cpu_to_le16(len);
2646 
2647 	/* select Rx antennas */
2648 	scan->flags |= il3945_get_antenna_flags(il);
2649 
2650 	scan->channel_count =
2651 	    il3945_get_channels_for_scan(il, band, is_active, n_probes,
2652 					 (void *)&scan->data[len], vif);
2653 	if (scan->channel_count == 0) {
2654 		D_SCAN("channel count %d\n", scan->channel_count);
2655 		return -EIO;
2656 	}
2657 
2658 	cmd.len +=
2659 	    le16_to_cpu(scan->tx_cmd.len) +
2660 	    scan->channel_count * sizeof(struct il3945_scan_channel);
2661 	cmd.data = scan;
2662 	scan->len = cpu_to_le16(cmd.len);
2663 
2664 	set_bit(S_SCAN_HW, &il->status);
2665 	ret = il_send_cmd_sync(il, &cmd);
2666 	if (ret)
2667 		clear_bit(S_SCAN_HW, &il->status);
2668 	return ret;
2669 }
2670 
2671 void
2672 il3945_post_scan(struct il_priv *il)
2673 {
2674 	/*
2675 	 * Since setting the RXON may have been deferred while
2676 	 * performing the scan, fire one off if needed
2677 	 */
2678 	if (memcmp(&il->staging, &il->active, sizeof(il->staging)))
2679 		il3945_commit_rxon(il);
2680 }
2681 
2682 static void
2683 il3945_bg_restart(struct work_struct *data)
2684 {
2685 	struct il_priv *il = container_of(data, struct il_priv, restart);
2686 
2687 	if (test_bit(S_EXIT_PENDING, &il->status))
2688 		return;
2689 
2690 	if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
2691 		mutex_lock(&il->mutex);
2692 		il->is_open = 0;
2693 		mutex_unlock(&il->mutex);
2694 		il3945_down(il);
2695 		ieee80211_restart_hw(il->hw);
2696 	} else {
2697 		il3945_down(il);
2698 
2699 		mutex_lock(&il->mutex);
2700 		if (test_bit(S_EXIT_PENDING, &il->status)) {
2701 			mutex_unlock(&il->mutex);
2702 			return;
2703 		}
2704 
2705 		__il3945_up(il);
2706 		mutex_unlock(&il->mutex);
2707 	}
2708 }
2709 
2710 static void
2711 il3945_bg_rx_replenish(struct work_struct *data)
2712 {
2713 	struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
2714 
2715 	mutex_lock(&il->mutex);
2716 	if (test_bit(S_EXIT_PENDING, &il->status))
2717 		goto out;
2718 
2719 	il3945_rx_replenish(il);
2720 out:
2721 	mutex_unlock(&il->mutex);
2722 }
2723 
2724 void
2725 il3945_post_associate(struct il_priv *il)
2726 {
2727 	int rc = 0;
2728 	struct ieee80211_conf *conf = NULL;
2729 
2730 	if (!il->vif || !il->is_open)
2731 		return;
2732 
2733 	D_ASSOC("Associated as %d to: %pM\n", il->vif->bss_conf.aid,
2734 		il->active.bssid_addr);
2735 
2736 	if (test_bit(S_EXIT_PENDING, &il->status))
2737 		return;
2738 
2739 	il_scan_cancel_timeout(il, 200);
2740 
2741 	conf = &il->hw->conf;
2742 
2743 	il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2744 	il3945_commit_rxon(il);
2745 
2746 	rc = il_send_rxon_timing(il);
2747 	if (rc)
2748 		IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n");
2749 
2750 	il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2751 
2752 	il->staging.assoc_id = cpu_to_le16(il->vif->bss_conf.aid);
2753 
2754 	D_ASSOC("assoc id %d beacon interval %d\n", il->vif->bss_conf.aid,
2755 		il->vif->bss_conf.beacon_int);
2756 
2757 	if (il->vif->bss_conf.use_short_preamble)
2758 		il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2759 	else
2760 		il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2761 
2762 	if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2763 		if (il->vif->bss_conf.use_short_slot)
2764 			il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2765 		else
2766 			il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2767 	}
2768 
2769 	il3945_commit_rxon(il);
2770 
2771 	switch (il->vif->type) {
2772 	case NL80211_IFTYPE_STATION:
2773 		il3945_rate_scale_init(il->hw, IL_AP_ID);
2774 		break;
2775 	case NL80211_IFTYPE_ADHOC:
2776 		il3945_send_beacon_cmd(il);
2777 		break;
2778 	default:
2779 		IL_ERR("%s Should not be called in %d mode\n", __func__,
2780 		      il->vif->type);
2781 		break;
2782 	}
2783 }
2784 
2785 /*****************************************************************************
2786  *
2787  * mac80211 entry point functions
2788  *
2789  *****************************************************************************/
2790 
2791 #define UCODE_READY_TIMEOUT	(2 * HZ)
2792 
2793 static int
2794 il3945_mac_start(struct ieee80211_hw *hw)
2795 {
2796 	struct il_priv *il = hw->priv;
2797 	int ret;
2798 
2799 	/* we should be verifying the device is ready to be opened */
2800 	mutex_lock(&il->mutex);
2801 	D_MAC80211("enter\n");
2802 
2803 	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
2804 	 * ucode filename and max sizes are card-specific. */
2805 
2806 	if (!il->ucode_code.len) {
2807 		ret = il3945_read_ucode(il);
2808 		if (ret) {
2809 			IL_ERR("Could not read microcode: %d\n", ret);
2810 			mutex_unlock(&il->mutex);
2811 			goto out_release_irq;
2812 		}
2813 	}
2814 
2815 	ret = __il3945_up(il);
2816 
2817 	mutex_unlock(&il->mutex);
2818 
2819 	if (ret)
2820 		goto out_release_irq;
2821 
2822 	D_INFO("Start UP work.\n");
2823 
2824 	/* Wait for START_ALIVE from ucode. Otherwise callbacks from
2825 	 * mac80211 will not be run successfully. */
2826 	ret = wait_event_timeout(il->wait_command_queue,
2827 				 test_bit(S_READY, &il->status),
2828 				 UCODE_READY_TIMEOUT);
2829 	if (!ret) {
2830 		if (!test_bit(S_READY, &il->status)) {
2831 			IL_ERR("Wait for START_ALIVE timeout after %dms.\n",
2832 			       jiffies_to_msecs(UCODE_READY_TIMEOUT));
2833 			ret = -ETIMEDOUT;
2834 			goto out_release_irq;
2835 		}
2836 	}
2837 
2838 	/* ucode is running and will send rfkill notifications,
2839 	 * no need to poll the killswitch state anymore */
2840 	cancel_delayed_work(&il->_3945.rfkill_poll);
2841 
2842 	il->is_open = 1;
2843 	D_MAC80211("leave\n");
2844 	return 0;
2845 
2846 out_release_irq:
2847 	il->is_open = 0;
2848 	D_MAC80211("leave - failed\n");
2849 	return ret;
2850 }
2851 
2852 static void
2853 il3945_mac_stop(struct ieee80211_hw *hw)
2854 {
2855 	struct il_priv *il = hw->priv;
2856 
2857 	D_MAC80211("enter\n");
2858 
2859 	if (!il->is_open) {
2860 		D_MAC80211("leave - skip\n");
2861 		return;
2862 	}
2863 
2864 	il->is_open = 0;
2865 
2866 	il3945_down(il);
2867 
2868 	flush_workqueue(il->workqueue);
2869 
2870 	/* start polling the killswitch state again */
2871 	queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2872 			   round_jiffies_relative(2 * HZ));
2873 
2874 	D_MAC80211("leave\n");
2875 }
2876 
2877 static void
2878 il3945_mac_tx(struct ieee80211_hw *hw,
2879 	       struct ieee80211_tx_control *control,
2880 	       struct sk_buff *skb)
2881 {
2882 	struct il_priv *il = hw->priv;
2883 
2884 	D_MAC80211("enter\n");
2885 
2886 	D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2887 	     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2888 
2889 	if (il3945_tx_skb(il, control->sta, skb))
2890 		dev_kfree_skb_any(skb);
2891 
2892 	D_MAC80211("leave\n");
2893 }
2894 
2895 void
2896 il3945_config_ap(struct il_priv *il)
2897 {
2898 	struct ieee80211_vif *vif = il->vif;
2899 	int rc = 0;
2900 
2901 	if (test_bit(S_EXIT_PENDING, &il->status))
2902 		return;
2903 
2904 	/* The following should be done only at AP bring up */
2905 	if (!(il_is_associated(il))) {
2906 
2907 		/* RXON - unassoc (to set timing command) */
2908 		il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2909 		il3945_commit_rxon(il);
2910 
2911 		/* RXON Timing */
2912 		rc = il_send_rxon_timing(il);
2913 		if (rc)
2914 			IL_WARN("C_RXON_TIMING failed - "
2915 				"Attempting to continue.\n");
2916 
2917 		il->staging.assoc_id = 0;
2918 
2919 		if (vif->bss_conf.use_short_preamble)
2920 			il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2921 		else
2922 			il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2923 
2924 		if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2925 			if (vif->bss_conf.use_short_slot)
2926 				il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2927 			else
2928 				il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2929 		}
2930 		/* restore RXON assoc */
2931 		il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2932 		il3945_commit_rxon(il);
2933 	}
2934 	il3945_send_beacon_cmd(il);
2935 }
2936 
2937 static int
2938 il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2939 		   struct ieee80211_vif *vif, struct ieee80211_sta *sta,
2940 		   struct ieee80211_key_conf *key)
2941 {
2942 	struct il_priv *il = hw->priv;
2943 	int ret = 0;
2944 	u8 sta_id = IL_INVALID_STATION;
2945 	u8 static_key;
2946 
2947 	D_MAC80211("enter\n");
2948 
2949 	if (il3945_mod_params.sw_crypto) {
2950 		D_MAC80211("leave - hwcrypto disabled\n");
2951 		return -EOPNOTSUPP;
2952 	}
2953 
2954 	/*
2955 	 * To support IBSS RSN, don't program group keys in IBSS, the
2956 	 * hardware will then not attempt to decrypt the frames.
2957 	 */
2958 	if (vif->type == NL80211_IFTYPE_ADHOC &&
2959 	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
2960 		D_MAC80211("leave - IBSS RSN\n");
2961 		return -EOPNOTSUPP;
2962 	}
2963 
2964 	static_key = !il_is_associated(il);
2965 
2966 	if (!static_key) {
2967 		sta_id = il_sta_id_or_broadcast(il, sta);
2968 		if (sta_id == IL_INVALID_STATION) {
2969 			D_MAC80211("leave - station not found\n");
2970 			return -EINVAL;
2971 		}
2972 	}
2973 
2974 	mutex_lock(&il->mutex);
2975 	il_scan_cancel_timeout(il, 100);
2976 
2977 	switch (cmd) {
2978 	case SET_KEY:
2979 		if (static_key)
2980 			ret = il3945_set_static_key(il, key);
2981 		else
2982 			ret = il3945_set_dynamic_key(il, key, sta_id);
2983 		D_MAC80211("enable hwcrypto key\n");
2984 		break;
2985 	case DISABLE_KEY:
2986 		if (static_key)
2987 			ret = il3945_remove_static_key(il);
2988 		else
2989 			ret = il3945_clear_sta_key_info(il, sta_id);
2990 		D_MAC80211("disable hwcrypto key\n");
2991 		break;
2992 	default:
2993 		ret = -EINVAL;
2994 	}
2995 
2996 	D_MAC80211("leave ret %d\n", ret);
2997 	mutex_unlock(&il->mutex);
2998 
2999 	return ret;
3000 }
3001 
3002 static int
3003 il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
3004 		   struct ieee80211_sta *sta)
3005 {
3006 	struct il_priv *il = hw->priv;
3007 	struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
3008 	int ret;
3009 	bool is_ap = vif->type == NL80211_IFTYPE_STATION;
3010 	u8 sta_id;
3011 
3012 	mutex_lock(&il->mutex);
3013 	D_INFO("station %pM\n", sta->addr);
3014 	sta_priv->common.sta_id = IL_INVALID_STATION;
3015 
3016 	ret = il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
3017 	if (ret) {
3018 		IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
3019 		/* Should we return success if return code is EEXIST ? */
3020 		mutex_unlock(&il->mutex);
3021 		return ret;
3022 	}
3023 
3024 	sta_priv->common.sta_id = sta_id;
3025 
3026 	/* Initialize rate scaling */
3027 	D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
3028 	il3945_rs_rate_init(il, sta, sta_id);
3029 	mutex_unlock(&il->mutex);
3030 
3031 	return 0;
3032 }
3033 
3034 static void
3035 il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
3036 			unsigned int *total_flags, u64 multicast)
3037 {
3038 	struct il_priv *il = hw->priv;
3039 	__le32 filter_or = 0, filter_nand = 0;
3040 
3041 #define CHK(test, flag)	do { \
3042 	if (*total_flags & (test))		\
3043 		filter_or |= (flag);		\
3044 	else					\
3045 		filter_nand |= (flag);		\
3046 	} while (0)
3047 
3048 	D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
3049 		   *total_flags);
3050 
3051 	CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK);
3052 	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
3053 	CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
3054 
3055 #undef CHK
3056 
3057 	mutex_lock(&il->mutex);
3058 
3059 	il->staging.filter_flags &= ~filter_nand;
3060 	il->staging.filter_flags |= filter_or;
3061 
3062 	/*
3063 	 * Not committing directly because hardware can perform a scan,
3064 	 * but even if hw is ready, committing here breaks for some reason,
3065 	 * we'll eventually commit the filter flags change anyway.
3066 	 */
3067 
3068 	mutex_unlock(&il->mutex);
3069 
3070 	/*
3071 	 * Receiving all multicast frames is always enabled by the
3072 	 * default flags setup in il_connection_init_rx_config()
3073 	 * since we currently do not support programming multicast
3074 	 * filters into the device.
3075 	 */
3076 	*total_flags &=
3077 	    FIF_OTHER_BSS | FIF_ALLMULTI |
3078 	    FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
3079 }
3080 
3081 /*****************************************************************************
3082  *
3083  * sysfs attributes
3084  *
3085  *****************************************************************************/
3086 
3087 #ifdef CONFIG_IWLEGACY_DEBUG
3088 
3089 /*
3090  * The following adds a new attribute to the sysfs representation
3091  * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
3092  * used for controlling the debug level.
3093  *
3094  * See the level definitions in iwl for details.
3095  *
3096  * The debug_level being managed using sysfs below is a per device debug
3097  * level that is used instead of the global debug level if it (the per
3098  * device debug level) is set.
3099  */
3100 static ssize_t
3101 il3945_show_debug_level(struct device *d, struct device_attribute *attr,
3102 			char *buf)
3103 {
3104 	struct il_priv *il = dev_get_drvdata(d);
3105 	return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
3106 }
3107 
3108 static ssize_t
3109 il3945_store_debug_level(struct device *d, struct device_attribute *attr,
3110 			 const char *buf, size_t count)
3111 {
3112 	struct il_priv *il = dev_get_drvdata(d);
3113 	unsigned long val;
3114 	int ret;
3115 
3116 	ret = kstrtoul(buf, 0, &val);
3117 	if (ret)
3118 		IL_INFO("%s is not in hex or decimal form.\n", buf);
3119 	else
3120 		il->debug_level = val;
3121 
3122 	return strnlen(buf, count);
3123 }
3124 
3125 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il3945_show_debug_level,
3126 		   il3945_store_debug_level);
3127 
3128 #endif /* CONFIG_IWLEGACY_DEBUG */
3129 
3130 static ssize_t
3131 il3945_show_temperature(struct device *d, struct device_attribute *attr,
3132 			char *buf)
3133 {
3134 	struct il_priv *il = dev_get_drvdata(d);
3135 
3136 	if (!il_is_alive(il))
3137 		return -EAGAIN;
3138 
3139 	return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
3140 }
3141 
3142 static DEVICE_ATTR(temperature, S_IRUGO, il3945_show_temperature, NULL);
3143 
3144 static ssize_t
3145 il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
3146 {
3147 	struct il_priv *il = dev_get_drvdata(d);
3148 	return sprintf(buf, "%d\n", il->tx_power_user_lmt);
3149 }
3150 
3151 static ssize_t
3152 il3945_store_tx_power(struct device *d, struct device_attribute *attr,
3153 		      const char *buf, size_t count)
3154 {
3155 	struct il_priv *il = dev_get_drvdata(d);
3156 	char *p = (char *)buf;
3157 	u32 val;
3158 
3159 	val = simple_strtoul(p, &p, 10);
3160 	if (p == buf)
3161 		IL_INFO(": %s is not in decimal form.\n", buf);
3162 	else
3163 		il3945_hw_reg_set_txpower(il, val);
3164 
3165 	return count;
3166 }
3167 
3168 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il3945_show_tx_power,
3169 		   il3945_store_tx_power);
3170 
3171 static ssize_t
3172 il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf)
3173 {
3174 	struct il_priv *il = dev_get_drvdata(d);
3175 
3176 	return sprintf(buf, "0x%04X\n", il->active.flags);
3177 }
3178 
3179 static ssize_t
3180 il3945_store_flags(struct device *d, struct device_attribute *attr,
3181 		   const char *buf, size_t count)
3182 {
3183 	struct il_priv *il = dev_get_drvdata(d);
3184 	u32 flags = simple_strtoul(buf, NULL, 0);
3185 
3186 	mutex_lock(&il->mutex);
3187 	if (le32_to_cpu(il->staging.flags) != flags) {
3188 		/* Cancel any currently running scans... */
3189 		if (il_scan_cancel_timeout(il, 100))
3190 			IL_WARN("Could not cancel scan.\n");
3191 		else {
3192 			D_INFO("Committing rxon.flags = 0x%04X\n", flags);
3193 			il->staging.flags = cpu_to_le32(flags);
3194 			il3945_commit_rxon(il);
3195 		}
3196 	}
3197 	mutex_unlock(&il->mutex);
3198 
3199 	return count;
3200 }
3201 
3202 static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, il3945_show_flags,
3203 		   il3945_store_flags);
3204 
3205 static ssize_t
3206 il3945_show_filter_flags(struct device *d, struct device_attribute *attr,
3207 			 char *buf)
3208 {
3209 	struct il_priv *il = dev_get_drvdata(d);
3210 
3211 	return sprintf(buf, "0x%04X\n", le32_to_cpu(il->active.filter_flags));
3212 }
3213 
3214 static ssize_t
3215 il3945_store_filter_flags(struct device *d, struct device_attribute *attr,
3216 			  const char *buf, size_t count)
3217 {
3218 	struct il_priv *il = dev_get_drvdata(d);
3219 	u32 filter_flags = simple_strtoul(buf, NULL, 0);
3220 
3221 	mutex_lock(&il->mutex);
3222 	if (le32_to_cpu(il->staging.filter_flags) != filter_flags) {
3223 		/* Cancel any currently running scans... */
3224 		if (il_scan_cancel_timeout(il, 100))
3225 			IL_WARN("Could not cancel scan.\n");
3226 		else {
3227 			D_INFO("Committing rxon.filter_flags = " "0x%04X\n",
3228 			       filter_flags);
3229 			il->staging.filter_flags = cpu_to_le32(filter_flags);
3230 			il3945_commit_rxon(il);
3231 		}
3232 	}
3233 	mutex_unlock(&il->mutex);
3234 
3235 	return count;
3236 }
3237 
3238 static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, il3945_show_filter_flags,
3239 		   il3945_store_filter_flags);
3240 
3241 static ssize_t
3242 il3945_show_measurement(struct device *d, struct device_attribute *attr,
3243 			char *buf)
3244 {
3245 	struct il_priv *il = dev_get_drvdata(d);
3246 	struct il_spectrum_notification measure_report;
3247 	u32 size = sizeof(measure_report), len = 0, ofs = 0;
3248 	u8 *data = (u8 *) &measure_report;
3249 	unsigned long flags;
3250 
3251 	spin_lock_irqsave(&il->lock, flags);
3252 	if (!(il->measurement_status & MEASUREMENT_READY)) {
3253 		spin_unlock_irqrestore(&il->lock, flags);
3254 		return 0;
3255 	}
3256 	memcpy(&measure_report, &il->measure_report, size);
3257 	il->measurement_status = 0;
3258 	spin_unlock_irqrestore(&il->lock, flags);
3259 
3260 	while (size && PAGE_SIZE - len) {
3261 		hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
3262 				   PAGE_SIZE - len, true);
3263 		len = strlen(buf);
3264 		if (PAGE_SIZE - len)
3265 			buf[len++] = '\n';
3266 
3267 		ofs += 16;
3268 		size -= min(size, 16U);
3269 	}
3270 
3271 	return len;
3272 }
3273 
3274 static ssize_t
3275 il3945_store_measurement(struct device *d, struct device_attribute *attr,
3276 			 const char *buf, size_t count)
3277 {
3278 	struct il_priv *il = dev_get_drvdata(d);
3279 	struct ieee80211_measurement_params params = {
3280 		.channel = le16_to_cpu(il->active.channel),
3281 		.start_time = cpu_to_le64(il->_3945.last_tsf),
3282 		.duration = cpu_to_le16(1),
3283 	};
3284 	u8 type = IL_MEASURE_BASIC;
3285 	u8 buffer[32];
3286 	u8 channel;
3287 
3288 	if (count) {
3289 		char *p = buffer;
3290 		strlcpy(buffer, buf, sizeof(buffer));
3291 		channel = simple_strtoul(p, NULL, 0);
3292 		if (channel)
3293 			params.channel = channel;
3294 
3295 		p = buffer;
3296 		while (*p && *p != ' ')
3297 			p++;
3298 		if (*p)
3299 			type = simple_strtoul(p + 1, NULL, 0);
3300 	}
3301 
3302 	D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n",
3303 	       type, params.channel, buf);
3304 	il3945_get_measurement(il, &params, type);
3305 
3306 	return count;
3307 }
3308 
3309 static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, il3945_show_measurement,
3310 		   il3945_store_measurement);
3311 
3312 static ssize_t
3313 il3945_store_retry_rate(struct device *d, struct device_attribute *attr,
3314 			const char *buf, size_t count)
3315 {
3316 	struct il_priv *il = dev_get_drvdata(d);
3317 
3318 	il->retry_rate = simple_strtoul(buf, NULL, 0);
3319 	if (il->retry_rate <= 0)
3320 		il->retry_rate = 1;
3321 
3322 	return count;
3323 }
3324 
3325 static ssize_t
3326 il3945_show_retry_rate(struct device *d, struct device_attribute *attr,
3327 		       char *buf)
3328 {
3329 	struct il_priv *il = dev_get_drvdata(d);
3330 	return sprintf(buf, "%d", il->retry_rate);
3331 }
3332 
3333 static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, il3945_show_retry_rate,
3334 		   il3945_store_retry_rate);
3335 
3336 static ssize_t
3337 il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf)
3338 {
3339 	/* all this shit doesn't belong into sysfs anyway */
3340 	return 0;
3341 }
3342 
3343 static DEVICE_ATTR(channels, S_IRUSR, il3945_show_channels, NULL);
3344 
3345 static ssize_t
3346 il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf)
3347 {
3348 	struct il_priv *il = dev_get_drvdata(d);
3349 
3350 	if (!il_is_alive(il))
3351 		return -EAGAIN;
3352 
3353 	return sprintf(buf, "%d\n", il3945_mod_params.antenna);
3354 }
3355 
3356 static ssize_t
3357 il3945_store_antenna(struct device *d, struct device_attribute *attr,
3358 		     const char *buf, size_t count)
3359 {
3360 	struct il_priv *il __maybe_unused = dev_get_drvdata(d);
3361 	int ant;
3362 
3363 	if (count == 0)
3364 		return 0;
3365 
3366 	if (sscanf(buf, "%1i", &ant) != 1) {
3367 		D_INFO("not in hex or decimal form.\n");
3368 		return count;
3369 	}
3370 
3371 	if (ant >= 0 && ant <= 2) {
3372 		D_INFO("Setting antenna select to %d.\n", ant);
3373 		il3945_mod_params.antenna = (enum il3945_antenna)ant;
3374 	} else
3375 		D_INFO("Bad antenna select value %d.\n", ant);
3376 
3377 	return count;
3378 }
3379 
3380 static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, il3945_show_antenna,
3381 		   il3945_store_antenna);
3382 
3383 static ssize_t
3384 il3945_show_status(struct device *d, struct device_attribute *attr, char *buf)
3385 {
3386 	struct il_priv *il = dev_get_drvdata(d);
3387 	if (!il_is_alive(il))
3388 		return -EAGAIN;
3389 	return sprintf(buf, "0x%08x\n", (int)il->status);
3390 }
3391 
3392 static DEVICE_ATTR(status, S_IRUGO, il3945_show_status, NULL);
3393 
3394 static ssize_t
3395 il3945_dump_error_log(struct device *d, struct device_attribute *attr,
3396 		      const char *buf, size_t count)
3397 {
3398 	struct il_priv *il = dev_get_drvdata(d);
3399 	char *p = (char *)buf;
3400 
3401 	if (p[0] == '1')
3402 		il3945_dump_nic_error_log(il);
3403 
3404 	return strnlen(buf, count);
3405 }
3406 
3407 static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, il3945_dump_error_log);
3408 
3409 /*****************************************************************************
3410  *
3411  * driver setup and tear down
3412  *
3413  *****************************************************************************/
3414 
3415 static void
3416 il3945_setup_deferred_work(struct il_priv *il)
3417 {
3418 	il->workqueue = create_singlethread_workqueue(DRV_NAME);
3419 
3420 	init_waitqueue_head(&il->wait_command_queue);
3421 
3422 	INIT_WORK(&il->restart, il3945_bg_restart);
3423 	INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
3424 	INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
3425 	INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
3426 	INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);
3427 
3428 	il_setup_scan_deferred_work(il);
3429 
3430 	il3945_hw_setup_deferred_work(il);
3431 
3432 	setup_timer(&il->watchdog, il_bg_watchdog, (unsigned long)il);
3433 
3434 	tasklet_init(&il->irq_tasklet,
3435 		     (void (*)(unsigned long))il3945_irq_tasklet,
3436 		     (unsigned long)il);
3437 }
3438 
3439 static void
3440 il3945_cancel_deferred_work(struct il_priv *il)
3441 {
3442 	il3945_hw_cancel_deferred_work(il);
3443 
3444 	cancel_delayed_work_sync(&il->init_alive_start);
3445 	cancel_delayed_work(&il->alive_start);
3446 
3447 	il_cancel_scan_deferred_work(il);
3448 }
3449 
3450 static struct attribute *il3945_sysfs_entries[] = {
3451 	&dev_attr_antenna.attr,
3452 	&dev_attr_channels.attr,
3453 	&dev_attr_dump_errors.attr,
3454 	&dev_attr_flags.attr,
3455 	&dev_attr_filter_flags.attr,
3456 	&dev_attr_measurement.attr,
3457 	&dev_attr_retry_rate.attr,
3458 	&dev_attr_status.attr,
3459 	&dev_attr_temperature.attr,
3460 	&dev_attr_tx_power.attr,
3461 #ifdef CONFIG_IWLEGACY_DEBUG
3462 	&dev_attr_debug_level.attr,
3463 #endif
3464 	NULL
3465 };
3466 
3467 static struct attribute_group il3945_attribute_group = {
3468 	.name = NULL,		/* put in device directory */
3469 	.attrs = il3945_sysfs_entries,
3470 };
3471 
3472 static struct ieee80211_ops il3945_mac_ops __read_mostly = {
3473 	.tx = il3945_mac_tx,
3474 	.start = il3945_mac_start,
3475 	.stop = il3945_mac_stop,
3476 	.add_interface = il_mac_add_interface,
3477 	.remove_interface = il_mac_remove_interface,
3478 	.change_interface = il_mac_change_interface,
3479 	.config = il_mac_config,
3480 	.configure_filter = il3945_configure_filter,
3481 	.set_key = il3945_mac_set_key,
3482 	.conf_tx = il_mac_conf_tx,
3483 	.reset_tsf = il_mac_reset_tsf,
3484 	.bss_info_changed = il_mac_bss_info_changed,
3485 	.hw_scan = il_mac_hw_scan,
3486 	.sta_add = il3945_mac_sta_add,
3487 	.sta_remove = il_mac_sta_remove,
3488 	.tx_last_beacon = il_mac_tx_last_beacon,
3489 	.flush = il_mac_flush,
3490 };
3491 
3492 static int
3493 il3945_init_drv(struct il_priv *il)
3494 {
3495 	int ret;
3496 	struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
3497 
3498 	il->retry_rate = 1;
3499 	il->beacon_skb = NULL;
3500 
3501 	spin_lock_init(&il->sta_lock);
3502 	spin_lock_init(&il->hcmd_lock);
3503 
3504 	INIT_LIST_HEAD(&il->free_frames);
3505 
3506 	mutex_init(&il->mutex);
3507 
3508 	il->ieee_channels = NULL;
3509 	il->ieee_rates = NULL;
3510 	il->band = NL80211_BAND_2GHZ;
3511 
3512 	il->iw_mode = NL80211_IFTYPE_STATION;
3513 	il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
3514 
3515 	/* initialize force reset */
3516 	il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
3517 
3518 	if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
3519 		IL_WARN("Unsupported EEPROM version: 0x%04X\n",
3520 			eeprom->version);
3521 		ret = -EINVAL;
3522 		goto err;
3523 	}
3524 	ret = il_init_channel_map(il);
3525 	if (ret) {
3526 		IL_ERR("initializing regulatory failed: %d\n", ret);
3527 		goto err;
3528 	}
3529 
3530 	/* Set up txpower settings in driver for all channels */
3531 	if (il3945_txpower_set_from_eeprom(il)) {
3532 		ret = -EIO;
3533 		goto err_free_channel_map;
3534 	}
3535 
3536 	ret = il_init_geos(il);
3537 	if (ret) {
3538 		IL_ERR("initializing geos failed: %d\n", ret);
3539 		goto err_free_channel_map;
3540 	}
3541 	il3945_init_hw_rates(il, il->ieee_rates);
3542 
3543 	return 0;
3544 
3545 err_free_channel_map:
3546 	il_free_channel_map(il);
3547 err:
3548 	return ret;
3549 }
3550 
3551 #define IL3945_MAX_PROBE_REQUEST	200
3552 
3553 static int
3554 il3945_setup_mac(struct il_priv *il)
3555 {
3556 	int ret;
3557 	struct ieee80211_hw *hw = il->hw;
3558 
3559 	hw->rate_control_algorithm = "iwl-3945-rs";
3560 	hw->sta_data_size = sizeof(struct il3945_sta_priv);
3561 	hw->vif_data_size = sizeof(struct il_vif_priv);
3562 
3563 	/* Tell mac80211 our characteristics */
3564 	ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
3565 	ieee80211_hw_set(hw, SUPPORTS_PS);
3566 	ieee80211_hw_set(hw, SIGNAL_DBM);
3567 	ieee80211_hw_set(hw, SPECTRUM_MGMT);
3568 
3569 	hw->wiphy->interface_modes =
3570 	    BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
3571 
3572 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
3573 	hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
3574 				       REGULATORY_DISABLE_BEACON_HINTS;
3575 
3576 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
3577 
3578 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
3579 	/* we create the 802.11 header and a zero-length SSID element */
3580 	hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;
3581 
3582 	/* Default value; 4 EDCA QOS priorities */
3583 	hw->queues = 4;
3584 
3585 	if (il->bands[NL80211_BAND_2GHZ].n_channels)
3586 		il->hw->wiphy->bands[NL80211_BAND_2GHZ] =
3587 		    &il->bands[NL80211_BAND_2GHZ];
3588 
3589 	if (il->bands[NL80211_BAND_5GHZ].n_channels)
3590 		il->hw->wiphy->bands[NL80211_BAND_5GHZ] =
3591 		    &il->bands[NL80211_BAND_5GHZ];
3592 
3593 	il_leds_init(il);
3594 
3595 	ret = ieee80211_register_hw(il->hw);
3596 	if (ret) {
3597 		IL_ERR("Failed to register hw (error %d)\n", ret);
3598 		return ret;
3599 	}
3600 	il->mac80211_registered = 1;
3601 
3602 	return 0;
3603 }
3604 
3605 static int
3606 il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3607 {
3608 	int err = 0;
3609 	struct il_priv *il;
3610 	struct ieee80211_hw *hw;
3611 	struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
3612 	struct il3945_eeprom *eeprom;
3613 	unsigned long flags;
3614 
3615 	/***********************
3616 	 * 1. Allocating HW data
3617 	 * ********************/
3618 
3619 	hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il3945_mac_ops);
3620 	if (!hw) {
3621 		err = -ENOMEM;
3622 		goto out;
3623 	}
3624 	il = hw->priv;
3625 	il->hw = hw;
3626 	SET_IEEE80211_DEV(hw, &pdev->dev);
3627 
3628 	il->cmd_queue = IL39_CMD_QUEUE_NUM;
3629 
3630 	/*
3631 	 * Disabling hardware scan means that mac80211 will perform scans
3632 	 * "the hard way", rather than using device's scan.
3633 	 */
3634 	if (il3945_mod_params.disable_hw_scan) {
3635 		D_INFO("Disabling hw_scan\n");
3636 		il3945_mac_ops.hw_scan = NULL;
3637 	}
3638 
3639 	D_INFO("*** LOAD DRIVER ***\n");
3640 	il->cfg = cfg;
3641 	il->ops = &il3945_ops;
3642 #ifdef CONFIG_IWLEGACY_DEBUGFS
3643 	il->debugfs_ops = &il3945_debugfs_ops;
3644 #endif
3645 	il->pci_dev = pdev;
3646 	il->inta_mask = CSR_INI_SET_MASK;
3647 
3648 	/***************************
3649 	 * 2. Initializing PCI bus
3650 	 * *************************/
3651 	pci_disable_link_state(pdev,
3652 			       PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
3653 			       PCIE_LINK_STATE_CLKPM);
3654 
3655 	if (pci_enable_device(pdev)) {
3656 		err = -ENODEV;
3657 		goto out_ieee80211_free_hw;
3658 	}
3659 
3660 	pci_set_master(pdev);
3661 
3662 	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3663 	if (!err)
3664 		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3665 	if (err) {
3666 		IL_WARN("No suitable DMA available.\n");
3667 		goto out_pci_disable_device;
3668 	}
3669 
3670 	pci_set_drvdata(pdev, il);
3671 	err = pci_request_regions(pdev, DRV_NAME);
3672 	if (err)
3673 		goto out_pci_disable_device;
3674 
3675 	/***********************
3676 	 * 3. Read REV Register
3677 	 * ********************/
3678 	il->hw_base = pci_ioremap_bar(pdev, 0);
3679 	if (!il->hw_base) {
3680 		err = -ENODEV;
3681 		goto out_pci_release_regions;
3682 	}
3683 
3684 	D_INFO("pci_resource_len = 0x%08llx\n",
3685 	       (unsigned long long)pci_resource_len(pdev, 0));
3686 	D_INFO("pci_resource_base = %p\n", il->hw_base);
3687 
3688 	/* We disable the RETRY_TIMEOUT register (0x41) to keep
3689 	 * PCI Tx retries from interfering with C3 CPU state */
3690 	pci_write_config_byte(pdev, 0x41, 0x00);
3691 
3692 	/* these spin locks will be used in apm_init and EEPROM access
3693 	 * we should init now
3694 	 */
3695 	spin_lock_init(&il->reg_lock);
3696 	spin_lock_init(&il->lock);
3697 
3698 	/*
3699 	 * stop and reset the on-board processor just in case it is in a
3700 	 * strange state ... like being left stranded by a primary kernel
3701 	 * and this is now the kdump kernel trying to start up
3702 	 */
3703 	_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3704 
3705 	/***********************
3706 	 * 4. Read EEPROM
3707 	 * ********************/
3708 
3709 	/* Read the EEPROM */
3710 	err = il_eeprom_init(il);
3711 	if (err) {
3712 		IL_ERR("Unable to init EEPROM\n");
3713 		goto out_iounmap;
3714 	}
3715 	/* MAC Address location in EEPROM same for 3945/4965 */
3716 	eeprom = (struct il3945_eeprom *)il->eeprom;
3717 	D_INFO("MAC address: %pM\n", eeprom->mac_address);
3718 	SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);
3719 
3720 	/***********************
3721 	 * 5. Setup HW Constants
3722 	 * ********************/
3723 	/* Device-specific setup */
3724 	err = il3945_hw_set_hw_params(il);
3725 	if (err) {
3726 		IL_ERR("failed to set hw settings\n");
3727 		goto out_eeprom_free;
3728 	}
3729 
3730 	/***********************
3731 	 * 6. Setup il
3732 	 * ********************/
3733 
3734 	err = il3945_init_drv(il);
3735 	if (err) {
3736 		IL_ERR("initializing driver failed\n");
3737 		goto out_unset_hw_params;
3738 	}
3739 
3740 	IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name);
3741 
3742 	/***********************
3743 	 * 7. Setup Services
3744 	 * ********************/
3745 
3746 	spin_lock_irqsave(&il->lock, flags);
3747 	il_disable_interrupts(il);
3748 	spin_unlock_irqrestore(&il->lock, flags);
3749 
3750 	pci_enable_msi(il->pci_dev);
3751 
3752 	err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
3753 	if (err) {
3754 		IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
3755 		goto out_disable_msi;
3756 	}
3757 
3758 	err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
3759 	if (err) {
3760 		IL_ERR("failed to create sysfs device attributes\n");
3761 		goto out_release_irq;
3762 	}
3763 
3764 	il_set_rxon_channel(il, &il->bands[NL80211_BAND_2GHZ].channels[5]);
3765 	il3945_setup_deferred_work(il);
3766 	il3945_setup_handlers(il);
3767 	il_power_initialize(il);
3768 
3769 	/*********************************
3770 	 * 8. Setup and Register mac80211
3771 	 * *******************************/
3772 
3773 	il_enable_interrupts(il);
3774 
3775 	err = il3945_setup_mac(il);
3776 	if (err)
3777 		goto out_remove_sysfs;
3778 
3779 	err = il_dbgfs_register(il, DRV_NAME);
3780 	if (err)
3781 		IL_ERR("failed to create debugfs files. Ignoring error: %d\n",
3782 		       err);
3783 
3784 	/* Start monitoring the killswitch */
3785 	queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ);
3786 
3787 	return 0;
3788 
3789 out_remove_sysfs:
3790 	destroy_workqueue(il->workqueue);
3791 	il->workqueue = NULL;
3792 	sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3793 out_release_irq:
3794 	free_irq(il->pci_dev->irq, il);
3795 out_disable_msi:
3796 	pci_disable_msi(il->pci_dev);
3797 	il_free_geos(il);
3798 	il_free_channel_map(il);
3799 out_unset_hw_params:
3800 	il3945_unset_hw_params(il);
3801 out_eeprom_free:
3802 	il_eeprom_free(il);
3803 out_iounmap:
3804 	iounmap(il->hw_base);
3805 out_pci_release_regions:
3806 	pci_release_regions(pdev);
3807 out_pci_disable_device:
3808 	pci_disable_device(pdev);
3809 out_ieee80211_free_hw:
3810 	ieee80211_free_hw(il->hw);
3811 out:
3812 	return err;
3813 }
3814 
3815 static void
3816 il3945_pci_remove(struct pci_dev *pdev)
3817 {
3818 	struct il_priv *il = pci_get_drvdata(pdev);
3819 	unsigned long flags;
3820 
3821 	if (!il)
3822 		return;
3823 
3824 	D_INFO("*** UNLOAD DRIVER ***\n");
3825 
3826 	il_dbgfs_unregister(il);
3827 
3828 	set_bit(S_EXIT_PENDING, &il->status);
3829 
3830 	il_leds_exit(il);
3831 
3832 	if (il->mac80211_registered) {
3833 		ieee80211_unregister_hw(il->hw);
3834 		il->mac80211_registered = 0;
3835 	} else {
3836 		il3945_down(il);
3837 	}
3838 
3839 	/*
3840 	 * Make sure device is reset to low power before unloading driver.
3841 	 * This may be redundant with il_down(), but there are paths to
3842 	 * run il_down() without calling apm_ops.stop(), and there are
3843 	 * paths to avoid running il_down() at all before leaving driver.
3844 	 * This (inexpensive) call *makes sure* device is reset.
3845 	 */
3846 	il_apm_stop(il);
3847 
3848 	/* make sure we flush any pending irq or
3849 	 * tasklet for the driver
3850 	 */
3851 	spin_lock_irqsave(&il->lock, flags);
3852 	il_disable_interrupts(il);
3853 	spin_unlock_irqrestore(&il->lock, flags);
3854 
3855 	il3945_synchronize_irq(il);
3856 
3857 	sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3858 
3859 	cancel_delayed_work_sync(&il->_3945.rfkill_poll);
3860 
3861 	il3945_dealloc_ucode_pci(il);
3862 
3863 	if (il->rxq.bd)
3864 		il3945_rx_queue_free(il, &il->rxq);
3865 	il3945_hw_txq_ctx_free(il);
3866 
3867 	il3945_unset_hw_params(il);
3868 
3869 	/*netif_stop_queue(dev); */
3870 	flush_workqueue(il->workqueue);
3871 
3872 	/* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
3873 	 * il->workqueue... so we can't take down the workqueue
3874 	 * until now... */
3875 	destroy_workqueue(il->workqueue);
3876 	il->workqueue = NULL;
3877 
3878 	free_irq(pdev->irq, il);
3879 	pci_disable_msi(pdev);
3880 
3881 	iounmap(il->hw_base);
3882 	pci_release_regions(pdev);
3883 	pci_disable_device(pdev);
3884 
3885 	il_free_channel_map(il);
3886 	il_free_geos(il);
3887 	kfree(il->scan_cmd);
3888 	if (il->beacon_skb)
3889 		dev_kfree_skb(il->beacon_skb);
3890 
3891 	ieee80211_free_hw(il->hw);
3892 }
3893 
3894 /*****************************************************************************
3895  *
3896  * driver and module entry point
3897  *
3898  *****************************************************************************/
3899 
3900 static struct pci_driver il3945_driver = {
3901 	.name = DRV_NAME,
3902 	.id_table = il3945_hw_card_ids,
3903 	.probe = il3945_pci_probe,
3904 	.remove = il3945_pci_remove,
3905 	.driver.pm = IL_LEGACY_PM_OPS,
3906 };
3907 
3908 static int __init
3909 il3945_init(void)
3910 {
3911 
3912 	int ret;
3913 	pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
3914 	pr_info(DRV_COPYRIGHT "\n");
3915 
3916 	ret = il3945_rate_control_register();
3917 	if (ret) {
3918 		pr_err("Unable to register rate control algorithm: %d\n", ret);
3919 		return ret;
3920 	}
3921 
3922 	ret = pci_register_driver(&il3945_driver);
3923 	if (ret) {
3924 		pr_err("Unable to initialize PCI module\n");
3925 		goto error_register;
3926 	}
3927 
3928 	return ret;
3929 
3930 error_register:
3931 	il3945_rate_control_unregister();
3932 	return ret;
3933 }
3934 
3935 static void __exit
3936 il3945_exit(void)
3937 {
3938 	pci_unregister_driver(&il3945_driver);
3939 	il3945_rate_control_unregister();
3940 }
3941 
3942 MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));
3943 
3944 module_param_named(antenna, il3945_mod_params.antenna, int, S_IRUGO);
3945 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
3946 module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, S_IRUGO);
3947 MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])");
3948 module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int,
3949 		   S_IRUGO);
3950 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
3951 #ifdef CONFIG_IWLEGACY_DEBUG
3952 module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
3953 MODULE_PARM_DESC(debug, "debug output mask");
3954 #endif
3955 module_param_named(fw_restart, il3945_mod_params.restart_fw, int, S_IRUGO);
3956 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3957 
3958 module_exit(il3945_exit);
3959 module_init(il3945_init);
3960