1 // SPDX-License-Identifier: GPL-2.0-only
2 /******************************************************************************
3  *
4  * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5  *
6  * Portions of this file are derived from the ipw3945 project, as well
7  * as portions of the ieee80211 subsystem header files.
8  *
9  * Contact Information:
10  *  Intel Linux Wireless <ilw@linux.intel.com>
11  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
12  *
13  *****************************************************************************/
14 
15 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
16 
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/pci.h>
21 #include <linux/slab.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/delay.h>
24 #include <linux/sched.h>
25 #include <linux/skbuff.h>
26 #include <linux/netdevice.h>
27 #include <linux/firmware.h>
28 #include <linux/etherdevice.h>
29 #include <linux/if_arp.h>
30 
31 #include <net/ieee80211_radiotap.h>
32 #include <net/mac80211.h>
33 
34 #include <asm/div64.h>
35 
36 #define DRV_NAME	"iwl3945"
37 
38 #include "commands.h"
39 #include "common.h"
40 #include "3945.h"
41 #include "iwl-spectrum.h"
42 
43 /*
44  * module name, copyright, version, etc.
45  */
46 
47 #define DRV_DESCRIPTION	\
48 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
49 
50 #ifdef CONFIG_IWLEGACY_DEBUG
51 #define VD "d"
52 #else
53 #define VD
54 #endif
55 
56 /*
57  * add "s" to indicate spectrum measurement included.
58  * we add it here to be consistent with previous releases in which
59  * this was configurable.
60  */
61 #define DRV_VERSION  IWLWIFI_VERSION VD "s"
62 #define DRV_COPYRIGHT	"Copyright(c) 2003-2011 Intel Corporation"
63 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
64 
65 MODULE_DESCRIPTION(DRV_DESCRIPTION);
66 MODULE_VERSION(DRV_VERSION);
67 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
68 MODULE_LICENSE("GPL");
69 
70  /* module parameters */
71 struct il_mod_params il3945_mod_params = {
72 	.sw_crypto = 1,
73 	.restart_fw = 1,
74 	.disable_hw_scan = 1,
75 	/* the rest are 0 by default */
76 };
77 
78 /**
79  * il3945_get_antenna_flags - Get antenna flags for RXON command
80  * @il: eeprom and antenna fields are used to determine antenna flags
81  *
82  * il->eeprom39  is used to determine if antenna AUX/MAIN are reversed
83  * il3945_mod_params.antenna specifies the antenna diversity mode:
84  *
85  * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
86  * IL_ANTENNA_MAIN      - Force MAIN antenna
87  * IL_ANTENNA_AUX       - Force AUX antenna
88  */
89 __le32
90 il3945_get_antenna_flags(const struct il_priv *il)
91 {
92 	struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
93 
94 	switch (il3945_mod_params.antenna) {
95 	case IL_ANTENNA_DIVERSITY:
96 		return 0;
97 
98 	case IL_ANTENNA_MAIN:
99 		if (eeprom->antenna_switch_type)
100 			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
101 		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
102 
103 	case IL_ANTENNA_AUX:
104 		if (eeprom->antenna_switch_type)
105 			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
106 		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
107 	}
108 
109 	/* bad antenna selector value */
110 	IL_ERR("Bad antenna selector value (0x%x)\n",
111 	       il3945_mod_params.antenna);
112 
113 	return 0;		/* "diversity" is default if error */
114 }
115 
116 static int
117 il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
118 				 struct ieee80211_key_conf *keyconf, u8 sta_id)
119 {
120 	unsigned long flags;
121 	__le16 key_flags = 0;
122 	int ret;
123 
124 	key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
125 	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
126 
127 	if (sta_id == il->hw_params.bcast_id)
128 		key_flags |= STA_KEY_MULTICAST_MSK;
129 
130 	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
131 	keyconf->hw_key_idx = keyconf->keyidx;
132 	key_flags &= ~STA_KEY_FLG_INVALID;
133 
134 	spin_lock_irqsave(&il->sta_lock, flags);
135 	il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
136 	il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
137 	memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
138 
139 	memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
140 
141 	if ((il->stations[sta_id].sta.key.
142 	     key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
143 		il->stations[sta_id].sta.key.key_offset =
144 		    il_get_free_ucode_key_idx(il);
145 	/* else, we are overriding an existing key => no need to allocated room
146 	 * in uCode. */
147 
148 	WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
149 	     "no space for a new key");
150 
151 	il->stations[sta_id].sta.key.key_flags = key_flags;
152 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
153 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
154 
155 	D_INFO("hwcrypto: modify ucode station key info\n");
156 
157 	ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
158 
159 	spin_unlock_irqrestore(&il->sta_lock, flags);
160 
161 	return ret;
162 }
163 
164 static int
165 il3945_set_tkip_dynamic_key_info(struct il_priv *il,
166 				 struct ieee80211_key_conf *keyconf, u8 sta_id)
167 {
168 	return -EOPNOTSUPP;
169 }
170 
171 static int
172 il3945_set_wep_dynamic_key_info(struct il_priv *il,
173 				struct ieee80211_key_conf *keyconf, u8 sta_id)
174 {
175 	return -EOPNOTSUPP;
176 }
177 
178 static int
179 il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
180 {
181 	unsigned long flags;
182 	struct il_addsta_cmd sta_cmd;
183 
184 	spin_lock_irqsave(&il->sta_lock, flags);
185 	memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
186 	memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
187 	il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
188 	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
189 	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
190 	memcpy(&sta_cmd, &il->stations[sta_id].sta,
191 	       sizeof(struct il_addsta_cmd));
192 	spin_unlock_irqrestore(&il->sta_lock, flags);
193 
194 	D_INFO("hwcrypto: clear ucode station key info\n");
195 	return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
196 }
197 
198 static int
199 il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
200 		       u8 sta_id)
201 {
202 	int ret = 0;
203 
204 	keyconf->hw_key_idx = HW_KEY_DYNAMIC;
205 
206 	switch (keyconf->cipher) {
207 	case WLAN_CIPHER_SUITE_CCMP:
208 		ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
209 		break;
210 	case WLAN_CIPHER_SUITE_TKIP:
211 		ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
212 		break;
213 	case WLAN_CIPHER_SUITE_WEP40:
214 	case WLAN_CIPHER_SUITE_WEP104:
215 		ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
216 		break;
217 	default:
218 		IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher);
219 		ret = -EINVAL;
220 	}
221 
222 	D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
223 	      keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
224 
225 	return ret;
226 }
227 
228 static int
229 il3945_remove_static_key(struct il_priv *il)
230 {
231 	return -EOPNOTSUPP;
232 }
233 
234 static int
235 il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key)
236 {
237 	if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
238 	    key->cipher == WLAN_CIPHER_SUITE_WEP104)
239 		return -EOPNOTSUPP;
240 
241 	IL_ERR("Static key invalid: cipher %x\n", key->cipher);
242 	return -EINVAL;
243 }
244 
245 static void
246 il3945_clear_free_frames(struct il_priv *il)
247 {
248 	struct list_head *element;
249 
250 	D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
251 
252 	while (!list_empty(&il->free_frames)) {
253 		element = il->free_frames.next;
254 		list_del(element);
255 		kfree(list_entry(element, struct il3945_frame, list));
256 		il->frames_count--;
257 	}
258 
259 	if (il->frames_count) {
260 		IL_WARN("%d frames still in use.  Did we lose one?\n",
261 			il->frames_count);
262 		il->frames_count = 0;
263 	}
264 }
265 
266 static struct il3945_frame *
267 il3945_get_free_frame(struct il_priv *il)
268 {
269 	struct il3945_frame *frame;
270 	struct list_head *element;
271 	if (list_empty(&il->free_frames)) {
272 		frame = kzalloc(sizeof(*frame), GFP_KERNEL);
273 		if (!frame) {
274 			IL_ERR("Could not allocate frame!\n");
275 			return NULL;
276 		}
277 
278 		il->frames_count++;
279 		return frame;
280 	}
281 
282 	element = il->free_frames.next;
283 	list_del(element);
284 	return list_entry(element, struct il3945_frame, list);
285 }
286 
287 static void
288 il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
289 {
290 	memset(frame, 0, sizeof(*frame));
291 	list_add(&frame->list, &il->free_frames);
292 }
293 
294 unsigned int
295 il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
296 			 int left)
297 {
298 
299 	if (!il_is_associated(il) || !il->beacon_skb)
300 		return 0;
301 
302 	if (il->beacon_skb->len > left)
303 		return 0;
304 
305 	memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
306 
307 	return il->beacon_skb->len;
308 }
309 
310 static int
311 il3945_send_beacon_cmd(struct il_priv *il)
312 {
313 	struct il3945_frame *frame;
314 	unsigned int frame_size;
315 	int rc;
316 	u8 rate;
317 
318 	frame = il3945_get_free_frame(il);
319 
320 	if (!frame) {
321 		IL_ERR("Could not obtain free frame buffer for beacon "
322 		       "command.\n");
323 		return -ENOMEM;
324 	}
325 
326 	rate = il_get_lowest_plcp(il);
327 
328 	frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);
329 
330 	rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
331 
332 	il3945_free_frame(il, frame);
333 
334 	return rc;
335 }
336 
337 static void
338 il3945_unset_hw_params(struct il_priv *il)
339 {
340 	if (il->_3945.shared_virt)
341 		dma_free_coherent(&il->pci_dev->dev,
342 				  sizeof(struct il3945_shared),
343 				  il->_3945.shared_virt, il->_3945.shared_phys);
344 }
345 
346 static void
347 il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
348 			     struct il_device_cmd *cmd,
349 			     struct sk_buff *skb_frag, int sta_id)
350 {
351 	struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
352 	struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;
353 
354 	tx_cmd->sec_ctl = 0;
355 
356 	switch (keyinfo->cipher) {
357 	case WLAN_CIPHER_SUITE_CCMP:
358 		tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
359 		memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
360 		D_TX("tx_cmd with AES hwcrypto\n");
361 		break;
362 
363 	case WLAN_CIPHER_SUITE_TKIP:
364 		break;
365 
366 	case WLAN_CIPHER_SUITE_WEP104:
367 		tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
368 		fallthrough;
369 	case WLAN_CIPHER_SUITE_WEP40:
370 		tx_cmd->sec_ctl |=
371 		    TX_CMD_SEC_WEP | (info->control.hw_key->
372 				      hw_key_idx & TX_CMD_SEC_MSK) <<
373 		    TX_CMD_SEC_SHIFT;
374 
375 		memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
376 
377 		D_TX("Configuring packet for WEP encryption " "with key %d\n",
378 		     info->control.hw_key->hw_key_idx);
379 		break;
380 
381 	default:
382 		IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
383 		break;
384 	}
385 }
386 
387 /*
388  * handle build C_TX command notification.
389  */
390 static void
391 il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd,
392 			  struct ieee80211_tx_info *info,
393 			  struct ieee80211_hdr *hdr, u8 std_id)
394 {
395 	struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
396 	__le32 tx_flags = tx_cmd->tx_flags;
397 	__le16 fc = hdr->frame_control;
398 
399 	tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
400 	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
401 		tx_flags |= TX_CMD_FLG_ACK_MSK;
402 		if (ieee80211_is_mgmt(fc))
403 			tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
404 		if (ieee80211_is_probe_resp(fc) &&
405 		    !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
406 			tx_flags |= TX_CMD_FLG_TSF_MSK;
407 	} else {
408 		tx_flags &= (~TX_CMD_FLG_ACK_MSK);
409 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
410 	}
411 
412 	tx_cmd->sta_id = std_id;
413 	if (ieee80211_has_morefrags(fc))
414 		tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
415 
416 	if (ieee80211_is_data_qos(fc)) {
417 		u8 *qc = ieee80211_get_qos_ctl(hdr);
418 		tx_cmd->tid_tspec = qc[0] & 0xf;
419 		tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
420 	} else {
421 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
422 	}
423 
424 	il_tx_cmd_protection(il, info, fc, &tx_flags);
425 
426 	tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
427 	if (ieee80211_is_mgmt(fc)) {
428 		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
429 			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
430 		else
431 			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
432 	} else {
433 		tx_cmd->timeout.pm_frame_timeout = 0;
434 	}
435 
436 	tx_cmd->driver_txop = 0;
437 	tx_cmd->tx_flags = tx_flags;
438 	tx_cmd->next_frame_len = 0;
439 }
440 
441 /*
442  * start C_TX command process
443  */
444 static int
445 il3945_tx_skb(struct il_priv *il,
446 	      struct ieee80211_sta *sta,
447 	      struct sk_buff *skb)
448 {
449 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
450 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
451 	struct il3945_tx_cmd *tx_cmd;
452 	struct il_tx_queue *txq = NULL;
453 	struct il_queue *q = NULL;
454 	struct il_device_cmd *out_cmd;
455 	struct il_cmd_meta *out_meta;
456 	dma_addr_t phys_addr;
457 	dma_addr_t txcmd_phys;
458 	int txq_id = skb_get_queue_mapping(skb);
459 	u16 len, idx, hdr_len;
460 	u16 firstlen, secondlen;
461 	u8 sta_id;
462 	u8 tid = 0;
463 	__le16 fc;
464 	u8 wait_write_ptr = 0;
465 	unsigned long flags;
466 
467 	spin_lock_irqsave(&il->lock, flags);
468 	if (il_is_rfkill(il)) {
469 		D_DROP("Dropping - RF KILL\n");
470 		goto drop_unlock;
471 	}
472 
473 	if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) ==
474 	    IL_INVALID_RATE) {
475 		IL_ERR("ERROR: No TX rate available.\n");
476 		goto drop_unlock;
477 	}
478 
479 	fc = hdr->frame_control;
480 
481 #ifdef CONFIG_IWLEGACY_DEBUG
482 	if (ieee80211_is_auth(fc))
483 		D_TX("Sending AUTH frame\n");
484 	else if (ieee80211_is_assoc_req(fc))
485 		D_TX("Sending ASSOC frame\n");
486 	else if (ieee80211_is_reassoc_req(fc))
487 		D_TX("Sending REASSOC frame\n");
488 #endif
489 
490 	spin_unlock_irqrestore(&il->lock, flags);
491 
492 	hdr_len = ieee80211_hdrlen(fc);
493 
494 	/* Find idx into station table for destination station */
495 	sta_id = il_sta_id_or_broadcast(il, sta);
496 	if (sta_id == IL_INVALID_STATION) {
497 		D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
498 		goto drop;
499 	}
500 
501 	D_RATE("station Id %d\n", sta_id);
502 
503 	if (ieee80211_is_data_qos(fc)) {
504 		u8 *qc = ieee80211_get_qos_ctl(hdr);
505 		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
506 		if (unlikely(tid >= MAX_TID_COUNT))
507 			goto drop;
508 	}
509 
510 	/* Descriptor for chosen Tx queue */
511 	txq = &il->txq[txq_id];
512 	q = &txq->q;
513 
514 	if ((il_queue_space(q) < q->high_mark))
515 		goto drop;
516 
517 	spin_lock_irqsave(&il->lock, flags);
518 
519 	idx = il_get_cmd_idx(q, q->write_ptr, 0);
520 
521 	txq->skbs[q->write_ptr] = skb;
522 
523 	/* Init first empty entry in queue's array of Tx/cmd buffers */
524 	out_cmd = txq->cmd[idx];
525 	out_meta = &txq->meta[idx];
526 	tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
527 	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
528 	memset(tx_cmd, 0, sizeof(*tx_cmd));
529 
530 	/*
531 	 * Set up the Tx-command (not MAC!) header.
532 	 * Store the chosen Tx queue and TFD idx within the sequence field;
533 	 * after Tx, uCode's Tx response will return this value so driver can
534 	 * locate the frame within the tx queue and do post-tx processing.
535 	 */
536 	out_cmd->hdr.cmd = C_TX;
537 	out_cmd->hdr.sequence =
538 	    cpu_to_le16((u16)
539 			(QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
540 
541 	/* Copy MAC header from skb into command buffer */
542 	memcpy(tx_cmd->hdr, hdr, hdr_len);
543 
544 	if (info->control.hw_key)
545 		il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);
546 
547 	/* TODO need this for burst mode later on */
548 	il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);
549 
550 	il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id);
551 
552 	/* Total # bytes to be transmitted */
553 	tx_cmd->len = cpu_to_le16((u16) skb->len);
554 
555 	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
556 	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
557 
558 	/*
559 	 * Use the first empty entry in this queue's command buffer array
560 	 * to contain the Tx command and MAC header concatenated together
561 	 * (payload data will be in another buffer).
562 	 * Size of this varies, due to varying MAC header length.
563 	 * If end is not dword aligned, we'll have 2 extra bytes at the end
564 	 * of the MAC header (device reads on dword boundaries).
565 	 * We'll tell device about this padding later.
566 	 */
567 	len =
568 	    sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
569 	    hdr_len;
570 	firstlen = (len + 3) & ~3;
571 
572 	/* Physical address of this Tx command's header (not MAC header!),
573 	 * within command buffer array. */
574 	txcmd_phys = dma_map_single(&il->pci_dev->dev, &out_cmd->hdr, firstlen,
575 				    DMA_TO_DEVICE);
576 	if (unlikely(dma_mapping_error(&il->pci_dev->dev, txcmd_phys)))
577 		goto drop_unlock;
578 
579 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
580 	 * if any (802.11 null frames have no payload). */
581 	secondlen = skb->len - hdr_len;
582 	if (secondlen > 0) {
583 		phys_addr = dma_map_single(&il->pci_dev->dev, skb->data + hdr_len,
584 					   secondlen, DMA_TO_DEVICE);
585 		if (unlikely(dma_mapping_error(&il->pci_dev->dev, phys_addr)))
586 			goto drop_unlock;
587 	}
588 
589 	/* Add buffer containing Tx command and MAC(!) header to TFD's
590 	 * first entry */
591 	il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
592 	dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
593 	dma_unmap_len_set(out_meta, len, firstlen);
594 	if (secondlen > 0)
595 		il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0,
596 					       U32_PAD(secondlen));
597 
598 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
599 		txq->need_update = 1;
600 	} else {
601 		wait_write_ptr = 1;
602 		txq->need_update = 0;
603 	}
604 
605 	il_update_stats(il, true, fc, skb->len);
606 
607 	D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
608 	D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
609 	il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
610 	il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr,
611 			  ieee80211_hdrlen(fc));
612 
613 	/* Tell device the write idx *just past* this latest filled TFD */
614 	q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
615 	il_txq_update_write_ptr(il, txq);
616 	spin_unlock_irqrestore(&il->lock, flags);
617 
618 	if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
619 		if (wait_write_ptr) {
620 			spin_lock_irqsave(&il->lock, flags);
621 			txq->need_update = 1;
622 			il_txq_update_write_ptr(il, txq);
623 			spin_unlock_irqrestore(&il->lock, flags);
624 		}
625 
626 		il_stop_queue(il, txq);
627 	}
628 
629 	return 0;
630 
631 drop_unlock:
632 	spin_unlock_irqrestore(&il->lock, flags);
633 drop:
634 	return -1;
635 }
636 
637 static int
638 il3945_get_measurement(struct il_priv *il,
639 		       struct ieee80211_measurement_params *params, u8 type)
640 {
641 	struct il_spectrum_cmd spectrum;
642 	struct il_rx_pkt *pkt;
643 	struct il_host_cmd cmd = {
644 		.id = C_SPECTRUM_MEASUREMENT,
645 		.data = (void *)&spectrum,
646 		.flags = CMD_WANT_SKB,
647 	};
648 	u32 add_time = le64_to_cpu(params->start_time);
649 	int rc;
650 	int spectrum_resp_status;
651 	int duration = le16_to_cpu(params->duration);
652 
653 	if (il_is_associated(il))
654 		add_time =
655 		    il_usecs_to_beacons(il,
656 					le64_to_cpu(params->start_time) -
657 					il->_3945.last_tsf,
658 					le16_to_cpu(il->timing.beacon_interval));
659 
660 	memset(&spectrum, 0, sizeof(spectrum));
661 
662 	spectrum.channel_count = cpu_to_le16(1);
663 	spectrum.flags =
664 	    RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
665 	spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
666 	cmd.len = sizeof(spectrum);
667 	spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
668 
669 	if (il_is_associated(il))
670 		spectrum.start_time =
671 		    il_add_beacon_time(il, il->_3945.last_beacon_time, add_time,
672 				       le16_to_cpu(il->timing.beacon_interval));
673 	else
674 		spectrum.start_time = 0;
675 
676 	spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
677 	spectrum.channels[0].channel = params->channel;
678 	spectrum.channels[0].type = type;
679 	if (il->active.flags & RXON_FLG_BAND_24G_MSK)
680 		spectrum.flags |=
681 		    RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK |
682 		    RXON_FLG_TGG_PROTECT_MSK;
683 
684 	rc = il_send_cmd_sync(il, &cmd);
685 	if (rc)
686 		return rc;
687 
688 	pkt = (struct il_rx_pkt *)cmd.reply_page;
689 	if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
690 		IL_ERR("Bad return from N_RX_ON_ASSOC command\n");
691 		rc = -EIO;
692 	}
693 
694 	spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
695 	switch (spectrum_resp_status) {
696 	case 0:		/* Command will be handled */
697 		if (pkt->u.spectrum.id != 0xff) {
698 			D_INFO("Replaced existing measurement: %d\n",
699 			       pkt->u.spectrum.id);
700 			il->measurement_status &= ~MEASUREMENT_READY;
701 		}
702 		il->measurement_status |= MEASUREMENT_ACTIVE;
703 		rc = 0;
704 		break;
705 
706 	case 1:		/* Command will not be handled */
707 		rc = -EAGAIN;
708 		break;
709 	}
710 
711 	il_free_pages(il, cmd.reply_page);
712 
713 	return rc;
714 }
715 
716 static void
717 il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
718 {
719 	struct il_rx_pkt *pkt = rxb_addr(rxb);
720 	struct il_alive_resp *palive;
721 	struct delayed_work *pwork;
722 
723 	palive = &pkt->u.alive_frame;
724 
725 	D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
726 	       palive->is_valid, palive->ver_type, palive->ver_subtype);
727 
728 	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
729 		D_INFO("Initialization Alive received.\n");
730 		memcpy(&il->card_alive_init, &pkt->u.alive_frame,
731 		       sizeof(struct il_alive_resp));
732 		pwork = &il->init_alive_start;
733 	} else {
734 		D_INFO("Runtime Alive received.\n");
735 		memcpy(&il->card_alive, &pkt->u.alive_frame,
736 		       sizeof(struct il_alive_resp));
737 		pwork = &il->alive_start;
738 		il3945_disable_events(il);
739 	}
740 
741 	/* We delay the ALIVE response by 5ms to
742 	 * give the HW RF Kill time to activate... */
743 	if (palive->is_valid == UCODE_VALID_OK)
744 		queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
745 	else
746 		IL_WARN("uCode did not respond OK.\n");
747 }
748 
749 static void
750 il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb)
751 {
752 	struct il_rx_pkt *pkt = rxb_addr(rxb);
753 
754 	D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status);
755 }
756 
757 static void
758 il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
759 {
760 	struct il_rx_pkt *pkt = rxb_addr(rxb);
761 	struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
762 #ifdef CONFIG_IWLEGACY_DEBUG
763 	u8 rate = beacon->beacon_notify_hdr.rate;
764 
765 	D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n",
766 	     le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
767 	     beacon->beacon_notify_hdr.failure_frame,
768 	     le32_to_cpu(beacon->ibss_mgr_status),
769 	     le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
770 #endif
771 
772 	il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
773 
774 }
775 
776 /* Handle notification from uCode that card's power state is changing
777  * due to software, hardware, or critical temperature RFKILL */
778 static void
779 il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
780 {
781 	struct il_rx_pkt *pkt = rxb_addr(rxb);
782 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
783 	unsigned long status = il->status;
784 
785 	IL_WARN("Card state received: HW:%s SW:%s\n",
786 		(flags & HW_CARD_DISABLED) ? "Kill" : "On",
787 		(flags & SW_CARD_DISABLED) ? "Kill" : "On");
788 
789 	_il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
790 
791 	if (flags & HW_CARD_DISABLED)
792 		set_bit(S_RFKILL, &il->status);
793 	else
794 		clear_bit(S_RFKILL, &il->status);
795 
796 	il_scan_cancel(il);
797 
798 	if ((test_bit(S_RFKILL, &status) !=
799 	     test_bit(S_RFKILL, &il->status)))
800 		wiphy_rfkill_set_hw_state(il->hw->wiphy,
801 					  test_bit(S_RFKILL, &il->status));
802 	else
803 		wake_up(&il->wait_command_queue);
804 }
805 
806 /*
807  * il3945_setup_handlers - Initialize Rx handler callbacks
808  *
809  * Setup the RX handlers for each of the reply types sent from the uCode
810  * to the host.
811  *
812  * This function chains into the hardware specific files for them to setup
813  * any hardware specific handlers as well.
814  */
815 static void
816 il3945_setup_handlers(struct il_priv *il)
817 {
818 	il->handlers[N_ALIVE] = il3945_hdl_alive;
819 	il->handlers[C_ADD_STA] = il3945_hdl_add_sta;
820 	il->handlers[N_ERROR] = il_hdl_error;
821 	il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
822 	il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
823 	il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
824 	il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
825 	il->handlers[N_BEACON] = il3945_hdl_beacon;
826 
827 	/*
828 	 * The same handler is used for both the REPLY to a discrete
829 	 * stats request from the host as well as for the periodic
830 	 * stats notifications (after received beacons) from the uCode.
831 	 */
832 	il->handlers[C_STATS] = il3945_hdl_c_stats;
833 	il->handlers[N_STATS] = il3945_hdl_stats;
834 
835 	il_setup_rx_scan_handlers(il);
836 	il->handlers[N_CARD_STATE] = il3945_hdl_card_state;
837 
838 	/* Set up hardware specific Rx handlers */
839 	il3945_hw_handler_setup(il);
840 }
841 
842 /************************** RX-FUNCTIONS ****************************/
843 /*
844  * Rx theory of operation
845  *
846  * The host allocates 32 DMA target addresses and passes the host address
847  * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
848  * 0 to 31
849  *
850  * Rx Queue Indexes
851  * The host/firmware share two idx registers for managing the Rx buffers.
852  *
853  * The READ idx maps to the first position that the firmware may be writing
854  * to -- the driver can read up to (but not including) this position and get
855  * good data.
856  * The READ idx is managed by the firmware once the card is enabled.
857  *
858  * The WRITE idx maps to the last position the driver has read from -- the
859  * position preceding WRITE is the last slot the firmware can place a packet.
860  *
861  * The queue is empty (no good data) if WRITE = READ - 1, and is full if
862  * WRITE = READ.
863  *
864  * During initialization, the host sets up the READ queue position to the first
865  * IDX position, and WRITE to the last (READ - 1 wrapped)
866  *
867  * When the firmware places a packet in a buffer, it will advance the READ idx
868  * and fire the RX interrupt.  The driver can then query the READ idx and
869  * process as many packets as possible, moving the WRITE idx forward as it
870  * resets the Rx queue buffers with new memory.
871  *
872  * The management in the driver is as follows:
873  * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
874  *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
875  *   to replenish the iwl->rxq->rx_free.
876  * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
877  *   iwl->rxq is replenished and the READ IDX is updated (updating the
878  *   'processed' and 'read' driver idxes as well)
879  * + A received packet is processed and handed to the kernel network stack,
880  *   detached from the iwl->rxq.  The driver 'processed' idx is updated.
881  * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
882  *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
883  *   IDX is not incremented and iwl->status(RX_STALLED) is set.  If there
884  *   were enough free buffers and RX_STALLED is set it is cleared.
885  *
886  *
887  * Driver sequence:
888  *
889  * il3945_rx_replenish()     Replenishes rx_free list from rx_used, and calls
890  *                            il3945_rx_queue_restock
891  * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
892  *                            queue, updates firmware pointers, and updates
893  *                            the WRITE idx.  If insufficient rx_free buffers
894  *                            are available, schedules il3945_rx_replenish
895  *
896  * -- enable interrupts --
897  * ISR - il3945_rx()         Detach il_rx_bufs from pool up to the
898  *                            READ IDX, detaching the SKB from the pool.
899  *                            Moves the packet buffer from queue to rx_used.
900  *                            Calls il3945_rx_queue_restock to refill any empty
901  *                            slots.
902  * ...
903  *
904  */
905 
906 /*
907  * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
908  */
909 static inline __le32
910 il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
911 {
912 	return cpu_to_le32((u32) dma_addr);
913 }
914 
915 /*
916  * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
917  *
918  * If there are slots in the RX queue that need to be restocked,
919  * and we have free pre-allocated buffers, fill the ranks as much
920  * as we can, pulling from rx_free.
921  *
922  * This moves the 'write' idx forward to catch up with 'processed', and
923  * also updates the memory address in the firmware to reference the new
924  * target buffer.
925  */
926 static void
927 il3945_rx_queue_restock(struct il_priv *il)
928 {
929 	struct il_rx_queue *rxq = &il->rxq;
930 	struct list_head *element;
931 	struct il_rx_buf *rxb;
932 	unsigned long flags;
933 
934 	spin_lock_irqsave(&rxq->lock, flags);
935 	while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
936 		/* Get next free Rx buffer, remove from free list */
937 		element = rxq->rx_free.next;
938 		rxb = list_entry(element, struct il_rx_buf, list);
939 		list_del(element);
940 
941 		/* Point to Rx buffer via next RBD in circular buffer */
942 		rxq->bd[rxq->write] =
943 		    il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
944 		rxq->queue[rxq->write] = rxb;
945 		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
946 		rxq->free_count--;
947 	}
948 	spin_unlock_irqrestore(&rxq->lock, flags);
949 	/* If the pre-allocated buffer pool is dropping low, schedule to
950 	 * refill it */
951 	if (rxq->free_count <= RX_LOW_WATERMARK)
952 		queue_work(il->workqueue, &il->rx_replenish);
953 
954 	/* If we've added more space for the firmware to place data, tell it.
955 	 * Increment device's write pointer in multiples of 8. */
956 	if (rxq->write_actual != (rxq->write & ~0x7) ||
957 	    abs(rxq->write - rxq->read) > 7) {
958 		spin_lock_irqsave(&rxq->lock, flags);
959 		rxq->need_update = 1;
960 		spin_unlock_irqrestore(&rxq->lock, flags);
961 		il_rx_queue_update_write_ptr(il, rxq);
962 	}
963 }
964 
965 /*
966  * il3945_rx_replenish - Move all used packet from rx_used to rx_free
967  *
968  * When moving to rx_free an SKB is allocated for the slot.
969  *
970  * Also restock the Rx queue via il3945_rx_queue_restock.
971  * This is called as a scheduled work item (except for during initialization)
972  */
973 static void
974 il3945_rx_allocate(struct il_priv *il, gfp_t priority)
975 {
976 	struct il_rx_queue *rxq = &il->rxq;
977 	struct list_head *element;
978 	struct il_rx_buf *rxb;
979 	struct page *page;
980 	dma_addr_t page_dma;
981 	unsigned long flags;
982 	gfp_t gfp_mask = priority;
983 
984 	while (1) {
985 		spin_lock_irqsave(&rxq->lock, flags);
986 		if (list_empty(&rxq->rx_used)) {
987 			spin_unlock_irqrestore(&rxq->lock, flags);
988 			return;
989 		}
990 		spin_unlock_irqrestore(&rxq->lock, flags);
991 
992 		if (rxq->free_count > RX_LOW_WATERMARK)
993 			gfp_mask |= __GFP_NOWARN;
994 
995 		if (il->hw_params.rx_page_order > 0)
996 			gfp_mask |= __GFP_COMP;
997 
998 		/* Alloc a new receive buffer */
999 		page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
1000 		if (!page) {
1001 			if (net_ratelimit())
1002 				D_INFO("Failed to allocate SKB buffer.\n");
1003 			if (rxq->free_count <= RX_LOW_WATERMARK &&
1004 			    net_ratelimit())
1005 				IL_ERR("Failed to allocate SKB buffer with %0x."
1006 				       "Only %u free buffers remaining.\n",
1007 				       priority, rxq->free_count);
1008 			/* We don't reschedule replenish work here -- we will
1009 			 * call the restock method and if it still needs
1010 			 * more buffers it will schedule replenish */
1011 			break;
1012 		}
1013 
1014 		/* Get physical address of RB/SKB */
1015 		page_dma =
1016 		    dma_map_page(&il->pci_dev->dev, page, 0,
1017 				 PAGE_SIZE << il->hw_params.rx_page_order,
1018 				 DMA_FROM_DEVICE);
1019 
1020 		if (unlikely(dma_mapping_error(&il->pci_dev->dev, page_dma))) {
1021 			__free_pages(page, il->hw_params.rx_page_order);
1022 			break;
1023 		}
1024 
1025 		spin_lock_irqsave(&rxq->lock, flags);
1026 
1027 		if (list_empty(&rxq->rx_used)) {
1028 			spin_unlock_irqrestore(&rxq->lock, flags);
1029 			dma_unmap_page(&il->pci_dev->dev, page_dma,
1030 				       PAGE_SIZE << il->hw_params.rx_page_order,
1031 				       DMA_FROM_DEVICE);
1032 			__free_pages(page, il->hw_params.rx_page_order);
1033 			return;
1034 		}
1035 
1036 		element = rxq->rx_used.next;
1037 		rxb = list_entry(element, struct il_rx_buf, list);
1038 		list_del(element);
1039 
1040 		rxb->page = page;
1041 		rxb->page_dma = page_dma;
1042 		list_add_tail(&rxb->list, &rxq->rx_free);
1043 		rxq->free_count++;
1044 		il->alloc_rxb_page++;
1045 
1046 		spin_unlock_irqrestore(&rxq->lock, flags);
1047 	}
1048 }
1049 
1050 void
1051 il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
1052 {
1053 	unsigned long flags;
1054 	int i;
1055 	spin_lock_irqsave(&rxq->lock, flags);
1056 	INIT_LIST_HEAD(&rxq->rx_free);
1057 	INIT_LIST_HEAD(&rxq->rx_used);
1058 	/* Fill the rx_used queue with _all_ of the Rx buffers */
1059 	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
1060 		/* In the reset function, these buffers may have been allocated
1061 		 * to an SKB, so we need to unmap and free potential storage */
1062 		if (rxq->pool[i].page != NULL) {
1063 			dma_unmap_page(&il->pci_dev->dev,
1064 				       rxq->pool[i].page_dma,
1065 				       PAGE_SIZE << il->hw_params.rx_page_order,
1066 				       DMA_FROM_DEVICE);
1067 			__il_free_pages(il, rxq->pool[i].page);
1068 			rxq->pool[i].page = NULL;
1069 		}
1070 		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
1071 	}
1072 
1073 	/* Set us so that we have processed and used all buffers, but have
1074 	 * not restocked the Rx queue with fresh buffers */
1075 	rxq->read = rxq->write = 0;
1076 	rxq->write_actual = 0;
1077 	rxq->free_count = 0;
1078 	spin_unlock_irqrestore(&rxq->lock, flags);
1079 }
1080 
1081 void
1082 il3945_rx_replenish(void *data)
1083 {
1084 	struct il_priv *il = data;
1085 	unsigned long flags;
1086 
1087 	il3945_rx_allocate(il, GFP_KERNEL);
1088 
1089 	spin_lock_irqsave(&il->lock, flags);
1090 	il3945_rx_queue_restock(il);
1091 	spin_unlock_irqrestore(&il->lock, flags);
1092 }
1093 
1094 static void
1095 il3945_rx_replenish_now(struct il_priv *il)
1096 {
1097 	il3945_rx_allocate(il, GFP_ATOMIC);
1098 
1099 	il3945_rx_queue_restock(il);
1100 }
1101 
1102 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
1103  * If an SKB has been detached, the POOL needs to have its SKB set to NULL
1104  * This free routine walks the list of POOL entries and if SKB is set to
1105  * non NULL it is unmapped and freed
1106  */
1107 static void
1108 il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
1109 {
1110 	int i;
1111 	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
1112 		if (rxq->pool[i].page != NULL) {
1113 			dma_unmap_page(&il->pci_dev->dev,
1114 				       rxq->pool[i].page_dma,
1115 				       PAGE_SIZE << il->hw_params.rx_page_order,
1116 				       DMA_FROM_DEVICE);
1117 			__il_free_pages(il, rxq->pool[i].page);
1118 			rxq->pool[i].page = NULL;
1119 		}
1120 	}
1121 
1122 	dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
1123 			  rxq->bd_dma);
1124 	dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
1125 			  rxq->rb_stts, rxq->rb_stts_dma);
1126 	rxq->bd = NULL;
1127 	rxq->rb_stts = NULL;
1128 }
1129 
1130 /* Convert linear signal-to-noise ratio into dB */
1131 static u8 ratio2dB[100] = {
1132 /*	 0   1   2   3   4   5   6   7   8   9 */
1133 	0, 0, 6, 10, 12, 14, 16, 17, 18, 19,	/* 00 - 09 */
1134 	20, 21, 22, 22, 23, 23, 24, 25, 26, 26,	/* 10 - 19 */
1135 	26, 26, 26, 27, 27, 28, 28, 28, 29, 29,	/* 20 - 29 */
1136 	29, 30, 30, 30, 31, 31, 31, 31, 32, 32,	/* 30 - 39 */
1137 	32, 32, 32, 33, 33, 33, 33, 33, 34, 34,	/* 40 - 49 */
1138 	34, 34, 34, 34, 35, 35, 35, 35, 35, 35,	/* 50 - 59 */
1139 	36, 36, 36, 36, 36, 36, 36, 37, 37, 37,	/* 60 - 69 */
1140 	37, 37, 37, 37, 37, 38, 38, 38, 38, 38,	/* 70 - 79 */
1141 	38, 38, 38, 38, 38, 39, 39, 39, 39, 39,	/* 80 - 89 */
1142 	39, 39, 39, 39, 39, 40, 40, 40, 40, 40	/* 90 - 99 */
1143 };
1144 
1145 /* Calculates a relative dB value from a ratio of linear
1146  *   (i.e. not dB) signal levels.
1147  * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
1148 int
1149 il3945_calc_db_from_ratio(int sig_ratio)
1150 {
1151 	/* 1000:1 or higher just report as 60 dB */
1152 	if (sig_ratio >= 1000)
1153 		return 60;
1154 
1155 	/* 100:1 or higher, divide by 10 and use table,
1156 	 *   add 20 dB to make up for divide by 10 */
1157 	if (sig_ratio >= 100)
1158 		return 20 + (int)ratio2dB[sig_ratio / 10];
1159 
1160 	/* We shouldn't see this */
1161 	if (sig_ratio < 1)
1162 		return 0;
1163 
1164 	/* Use table for ratios 1:1 - 99:1 */
1165 	return (int)ratio2dB[sig_ratio];
1166 }
1167 
1168 /*
1169  * il3945_rx_handle - Main entry function for receiving responses from uCode
1170  *
1171  * Uses the il->handlers callback function array to invoke
1172  * the appropriate handlers, including command responses,
1173  * frame-received notifications, and other notifications.
1174  */
1175 static void
1176 il3945_rx_handle(struct il_priv *il)
1177 {
1178 	struct il_rx_buf *rxb;
1179 	struct il_rx_pkt *pkt;
1180 	struct il_rx_queue *rxq = &il->rxq;
1181 	u32 r, i;
1182 	int reclaim;
1183 	unsigned long flags;
1184 	u8 fill_rx = 0;
1185 	u32 count = 8;
1186 	int total_empty = 0;
1187 
1188 	/* uCode's read idx (stored in shared DRAM) indicates the last Rx
1189 	 * buffer that the driver may process (last buffer filled by ucode). */
1190 	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
1191 	i = rxq->read;
1192 
1193 	/* calculate total frames need to be restock after handling RX */
1194 	total_empty = r - rxq->write_actual;
1195 	if (total_empty < 0)
1196 		total_empty += RX_QUEUE_SIZE;
1197 
1198 	if (total_empty > (RX_QUEUE_SIZE / 2))
1199 		fill_rx = 1;
1200 	/* Rx interrupt, but nothing sent from uCode */
1201 	if (i == r)
1202 		D_RX("r = %d, i = %d\n", r, i);
1203 
1204 	while (i != r) {
1205 		int len;
1206 
1207 		rxb = rxq->queue[i];
1208 
1209 		/* If an RXB doesn't have a Rx queue slot associated with it,
1210 		 * then a bug has been introduced in the queue refilling
1211 		 * routines -- catch it here */
1212 		BUG_ON(rxb == NULL);
1213 
1214 		rxq->queue[i] = NULL;
1215 
1216 		dma_unmap_page(&il->pci_dev->dev, rxb->page_dma,
1217 			       PAGE_SIZE << il->hw_params.rx_page_order,
1218 			       DMA_FROM_DEVICE);
1219 		pkt = rxb_addr(rxb);
1220 
1221 		len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
1222 		len += sizeof(u32);	/* account for status word */
1223 
1224 		reclaim = il_need_reclaim(il, pkt);
1225 
1226 		/* Based on type of command response or notification,
1227 		 *   handle those that need handling via function in
1228 		 *   handlers table.  See il3945_setup_handlers() */
1229 		if (il->handlers[pkt->hdr.cmd]) {
1230 			D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
1231 			     il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1232 			il->isr_stats.handlers[pkt->hdr.cmd]++;
1233 			il->handlers[pkt->hdr.cmd] (il, rxb);
1234 		} else {
1235 			/* No handling needed */
1236 			D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
1237 			     i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1238 		}
1239 
1240 		/*
1241 		 * XXX: After here, we should always check rxb->page
1242 		 * against NULL before touching it or its virtual
1243 		 * memory (pkt). Because some handler might have
1244 		 * already taken or freed the pages.
1245 		 */
1246 
1247 		if (reclaim) {
1248 			/* Invoke any callbacks, transfer the buffer to caller,
1249 			 * and fire off the (possibly) blocking il_send_cmd()
1250 			 * as we reclaim the driver command queue */
1251 			if (rxb->page)
1252 				il_tx_cmd_complete(il, rxb);
1253 			else
1254 				IL_WARN("Claim null rxb?\n");
1255 		}
1256 
1257 		/* Reuse the page if possible. For notification packets and
1258 		 * SKBs that fail to Rx correctly, add them back into the
1259 		 * rx_free list for reuse later. */
1260 		spin_lock_irqsave(&rxq->lock, flags);
1261 		if (rxb->page != NULL) {
1262 			rxb->page_dma =
1263 			    dma_map_page(&il->pci_dev->dev, rxb->page, 0,
1264 					 PAGE_SIZE << il->hw_params.rx_page_order,
1265 					 DMA_FROM_DEVICE);
1266 			if (unlikely(dma_mapping_error(&il->pci_dev->dev,
1267 						       rxb->page_dma))) {
1268 				__il_free_pages(il, rxb->page);
1269 				rxb->page = NULL;
1270 				list_add_tail(&rxb->list, &rxq->rx_used);
1271 			} else {
1272 				list_add_tail(&rxb->list, &rxq->rx_free);
1273 				rxq->free_count++;
1274 			}
1275 		} else
1276 			list_add_tail(&rxb->list, &rxq->rx_used);
1277 
1278 		spin_unlock_irqrestore(&rxq->lock, flags);
1279 
1280 		i = (i + 1) & RX_QUEUE_MASK;
1281 		/* If there are a lot of unused frames,
1282 		 * restock the Rx queue so ucode won't assert. */
1283 		if (fill_rx) {
1284 			count++;
1285 			if (count >= 8) {
1286 				rxq->read = i;
1287 				il3945_rx_replenish_now(il);
1288 				count = 0;
1289 			}
1290 		}
1291 	}
1292 
1293 	/* Backtrack one entry */
1294 	rxq->read = i;
1295 	if (fill_rx)
1296 		il3945_rx_replenish_now(il);
1297 	else
1298 		il3945_rx_queue_restock(il);
1299 }
1300 
1301 /* call this function to flush any scheduled tasklet */
1302 static inline void
1303 il3945_synchronize_irq(struct il_priv *il)
1304 {
1305 	/* wait to make sure we flush pending tasklet */
1306 	synchronize_irq(il->pci_dev->irq);
1307 	tasklet_kill(&il->irq_tasklet);
1308 }
1309 
1310 static const char *
1311 il3945_desc_lookup(int i)
1312 {
1313 	switch (i) {
1314 	case 1:
1315 		return "FAIL";
1316 	case 2:
1317 		return "BAD_PARAM";
1318 	case 3:
1319 		return "BAD_CHECKSUM";
1320 	case 4:
1321 		return "NMI_INTERRUPT";
1322 	case 5:
1323 		return "SYSASSERT";
1324 	case 6:
1325 		return "FATAL_ERROR";
1326 	}
1327 
1328 	return "UNKNOWN";
1329 }
1330 
1331 #define ERROR_START_OFFSET  (1 * sizeof(u32))
1332 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
1333 
1334 void
1335 il3945_dump_nic_error_log(struct il_priv *il)
1336 {
1337 	u32 i;
1338 	u32 desc, time, count, base, data1;
1339 	u32 blink1, blink2, ilink1, ilink2;
1340 
1341 	base = le32_to_cpu(il->card_alive.error_event_table_ptr);
1342 
1343 	if (!il3945_hw_valid_rtc_data_addr(base)) {
1344 		IL_ERR("Not valid error log pointer 0x%08X\n", base);
1345 		return;
1346 	}
1347 
1348 	count = il_read_targ_mem(il, base);
1349 
1350 	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1351 		IL_ERR("Start IWL Error Log Dump:\n");
1352 		IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
1353 	}
1354 
1355 	IL_ERR("Desc       Time       asrtPC  blink2 "
1356 	       "ilink1  nmiPC   Line\n");
1357 	for (i = ERROR_START_OFFSET;
1358 	     i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
1359 	     i += ERROR_ELEM_SIZE) {
1360 		desc = il_read_targ_mem(il, base + i);
1361 		time = il_read_targ_mem(il, base + i + 1 * sizeof(u32));
1362 		blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32));
1363 		blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32));
1364 		ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32));
1365 		ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32));
1366 		data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32));
1367 
1368 		IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
1369 		       il3945_desc_lookup(desc), desc, time, blink1, blink2,
1370 		       ilink1, ilink2, data1);
1371 	}
1372 }
1373 
1374 static void
1375 il3945_irq_tasklet(struct tasklet_struct *t)
1376 {
1377 	struct il_priv *il = from_tasklet(il, t, irq_tasklet);
1378 	u32 inta, handled = 0;
1379 	u32 inta_fh;
1380 	unsigned long flags;
1381 #ifdef CONFIG_IWLEGACY_DEBUG
1382 	u32 inta_mask;
1383 #endif
1384 
1385 	spin_lock_irqsave(&il->lock, flags);
1386 
1387 	/* Ack/clear/reset pending uCode interrupts.
1388 	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1389 	 *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
1390 	inta = _il_rd(il, CSR_INT);
1391 	_il_wr(il, CSR_INT, inta);
1392 
1393 	/* Ack/clear/reset pending flow-handler (DMA) interrupts.
1394 	 * Any new interrupts that happen after this, either while we're
1395 	 * in this tasklet, or later, will show up in next ISR/tasklet. */
1396 	inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1397 	_il_wr(il, CSR_FH_INT_STATUS, inta_fh);
1398 
1399 #ifdef CONFIG_IWLEGACY_DEBUG
1400 	if (il_get_debug_level(il) & IL_DL_ISR) {
1401 		/* just for debug */
1402 		inta_mask = _il_rd(il, CSR_INT_MASK);
1403 		D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
1404 		      inta_mask, inta_fh);
1405 	}
1406 #endif
1407 
1408 	spin_unlock_irqrestore(&il->lock, flags);
1409 
1410 	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1411 	 * atomic, make sure that inta covers all the interrupts that
1412 	 * we've discovered, even if FH interrupt came in just after
1413 	 * reading CSR_INT. */
1414 	if (inta_fh & CSR39_FH_INT_RX_MASK)
1415 		inta |= CSR_INT_BIT_FH_RX;
1416 	if (inta_fh & CSR39_FH_INT_TX_MASK)
1417 		inta |= CSR_INT_BIT_FH_TX;
1418 
1419 	/* Now service all interrupt bits discovered above. */
1420 	if (inta & CSR_INT_BIT_HW_ERR) {
1421 		IL_ERR("Hardware error detected.  Restarting.\n");
1422 
1423 		/* Tell the device to stop sending interrupts */
1424 		il_disable_interrupts(il);
1425 
1426 		il->isr_stats.hw++;
1427 		il_irq_handle_error(il);
1428 
1429 		handled |= CSR_INT_BIT_HW_ERR;
1430 
1431 		return;
1432 	}
1433 #ifdef CONFIG_IWLEGACY_DEBUG
1434 	if (il_get_debug_level(il) & (IL_DL_ISR)) {
1435 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
1436 		if (inta & CSR_INT_BIT_SCD) {
1437 			D_ISR("Scheduler finished to transmit "
1438 			      "the frame/frames.\n");
1439 			il->isr_stats.sch++;
1440 		}
1441 
1442 		/* Alive notification via Rx interrupt will do the real work */
1443 		if (inta & CSR_INT_BIT_ALIVE) {
1444 			D_ISR("Alive interrupt\n");
1445 			il->isr_stats.alive++;
1446 		}
1447 	}
1448 #endif
1449 	/* Safely ignore these bits for debug checks below */
1450 	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1451 
1452 	/* Error detected by uCode */
1453 	if (inta & CSR_INT_BIT_SW_ERR) {
1454 		IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n",
1455 		       inta);
1456 		il->isr_stats.sw++;
1457 		il_irq_handle_error(il);
1458 		handled |= CSR_INT_BIT_SW_ERR;
1459 	}
1460 
1461 	/* uCode wakes up after power-down sleep */
1462 	if (inta & CSR_INT_BIT_WAKEUP) {
1463 		D_ISR("Wakeup interrupt\n");
1464 		il_rx_queue_update_write_ptr(il, &il->rxq);
1465 
1466 		spin_lock_irqsave(&il->lock, flags);
1467 		il_txq_update_write_ptr(il, &il->txq[0]);
1468 		il_txq_update_write_ptr(il, &il->txq[1]);
1469 		il_txq_update_write_ptr(il, &il->txq[2]);
1470 		il_txq_update_write_ptr(il, &il->txq[3]);
1471 		il_txq_update_write_ptr(il, &il->txq[4]);
1472 		spin_unlock_irqrestore(&il->lock, flags);
1473 
1474 		il->isr_stats.wakeup++;
1475 		handled |= CSR_INT_BIT_WAKEUP;
1476 	}
1477 
1478 	/* All uCode command responses, including Tx command responses,
1479 	 * Rx "responses" (frame-received notification), and other
1480 	 * notifications from uCode come through here*/
1481 	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1482 		il3945_rx_handle(il);
1483 		il->isr_stats.rx++;
1484 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1485 	}
1486 
1487 	if (inta & CSR_INT_BIT_FH_TX) {
1488 		D_ISR("Tx interrupt\n");
1489 		il->isr_stats.tx++;
1490 
1491 		_il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
1492 		il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0);
1493 		handled |= CSR_INT_BIT_FH_TX;
1494 	}
1495 
1496 	if (inta & ~handled) {
1497 		IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
1498 		il->isr_stats.unhandled++;
1499 	}
1500 
1501 	if (inta & ~il->inta_mask) {
1502 		IL_WARN("Disabled INTA bits 0x%08x were pending\n",
1503 			inta & ~il->inta_mask);
1504 		IL_WARN("   with inta_fh = 0x%08x\n", inta_fh);
1505 	}
1506 
1507 	/* Re-enable all interrupts */
1508 	/* only Re-enable if disabled by irq */
1509 	if (test_bit(S_INT_ENABLED, &il->status))
1510 		il_enable_interrupts(il);
1511 
1512 #ifdef CONFIG_IWLEGACY_DEBUG
1513 	if (il_get_debug_level(il) & (IL_DL_ISR)) {
1514 		inta = _il_rd(il, CSR_INT);
1515 		inta_mask = _il_rd(il, CSR_INT_MASK);
1516 		inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1517 		D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1518 		      "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1519 	}
1520 #endif
1521 }
1522 
1523 static int
1524 il3945_get_channels_for_scan(struct il_priv *il, enum nl80211_band band,
1525 			     u8 is_active, u8 n_probes,
1526 			     struct il3945_scan_channel *scan_ch,
1527 			     struct ieee80211_vif *vif)
1528 {
1529 	struct ieee80211_channel *chan;
1530 	const struct ieee80211_supported_band *sband;
1531 	const struct il_channel_info *ch_info;
1532 	u16 passive_dwell = 0;
1533 	u16 active_dwell = 0;
1534 	int added, i;
1535 
1536 	sband = il_get_hw_mode(il, band);
1537 	if (!sband)
1538 		return 0;
1539 
1540 	active_dwell = il_get_active_dwell_time(il, band, n_probes);
1541 	passive_dwell = il_get_passive_dwell_time(il, band, vif);
1542 
1543 	if (passive_dwell <= active_dwell)
1544 		passive_dwell = active_dwell + 1;
1545 
1546 	for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
1547 		chan = il->scan_request->channels[i];
1548 
1549 		if (chan->band != band)
1550 			continue;
1551 
1552 		scan_ch->channel = chan->hw_value;
1553 
1554 		ch_info = il_get_channel_info(il, band, scan_ch->channel);
1555 		if (!il_is_channel_valid(ch_info)) {
1556 			D_SCAN("Channel %d is INVALID for this band.\n",
1557 			       scan_ch->channel);
1558 			continue;
1559 		}
1560 
1561 		scan_ch->active_dwell = cpu_to_le16(active_dwell);
1562 		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1563 		/* If passive , set up for auto-switch
1564 		 *  and use long active_dwell time.
1565 		 */
1566 		if (!is_active || il_is_channel_passive(ch_info) ||
1567 		    (chan->flags & IEEE80211_CHAN_NO_IR)) {
1568 			scan_ch->type = 0;	/* passive */
1569 			if (IL_UCODE_API(il->ucode_ver) == 1)
1570 				scan_ch->active_dwell =
1571 				    cpu_to_le16(passive_dwell - 1);
1572 		} else {
1573 			scan_ch->type = 1;	/* active */
1574 		}
1575 
1576 		/* Set direct probe bits. These may be used both for active
1577 		 * scan channels (probes gets sent right away),
1578 		 * or for passive channels (probes get se sent only after
1579 		 * hearing clear Rx packet).*/
1580 		if (IL_UCODE_API(il->ucode_ver) >= 2) {
1581 			if (n_probes)
1582 				scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1583 		} else {
1584 			/* uCode v1 does not allow setting direct probe bits on
1585 			 * passive channel. */
1586 			if ((scan_ch->type & 1) && n_probes)
1587 				scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1588 		}
1589 
1590 		/* Set txpower levels to defaults */
1591 		scan_ch->tpc.dsp_atten = 110;
1592 		/* scan_pwr_info->tpc.dsp_atten; */
1593 
1594 		/*scan_pwr_info->tpc.tx_gain; */
1595 		if (band == NL80211_BAND_5GHZ)
1596 			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
1597 		else {
1598 			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
1599 			/* NOTE: if we were doing 6Mb OFDM for scans we'd use
1600 			 * power level:
1601 			 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
1602 			 */
1603 		}
1604 
1605 		D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel,
1606 		       (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
1607 		       (scan_ch->type & 1) ? active_dwell : passive_dwell);
1608 
1609 		scan_ch++;
1610 		added++;
1611 	}
1612 
1613 	D_SCAN("total channels to scan %d\n", added);
1614 	return added;
1615 }
1616 
1617 static void
1618 il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
1619 {
1620 	int i;
1621 
1622 	for (i = 0; i < RATE_COUNT_LEGACY; i++) {
1623 		rates[i].bitrate = il3945_rates[i].ieee * 5;
1624 		rates[i].hw_value = i;	/* Rate scaling will work on idxes */
1625 		rates[i].hw_value_short = i;
1626 		rates[i].flags = 0;
1627 		if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
1628 			/*
1629 			 * If CCK != 1M then set short preamble rate flag.
1630 			 */
1631 			rates[i].flags |=
1632 			    (il3945_rates[i].plcp ==
1633 			     10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
1634 		}
1635 	}
1636 }
1637 
1638 /******************************************************************************
1639  *
1640  * uCode download functions
1641  *
1642  ******************************************************************************/
1643 
1644 static void
1645 il3945_dealloc_ucode_pci(struct il_priv *il)
1646 {
1647 	il_free_fw_desc(il->pci_dev, &il->ucode_code);
1648 	il_free_fw_desc(il->pci_dev, &il->ucode_data);
1649 	il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
1650 	il_free_fw_desc(il->pci_dev, &il->ucode_init);
1651 	il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
1652 	il_free_fw_desc(il->pci_dev, &il->ucode_boot);
1653 }
1654 
1655 /*
1656  * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
1657  *     looking at all data.
1658  */
1659 static int
1660 il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len)
1661 {
1662 	u32 val;
1663 	u32 save_len = len;
1664 	int rc = 0;
1665 	u32 errcnt;
1666 
1667 	D_INFO("ucode inst image size is %u\n", len);
1668 
1669 	il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND);
1670 
1671 	errcnt = 0;
1672 	for (; len > 0; len -= sizeof(u32), image++) {
1673 		/* read data comes through single port, auto-incr addr */
1674 		/* NOTE: Use the debugless read so we don't flood kernel log
1675 		 * if IL_DL_IO is set */
1676 		val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1677 		if (val != le32_to_cpu(*image)) {
1678 			IL_ERR("uCode INST section is invalid at "
1679 			       "offset 0x%x, is 0x%x, s/b 0x%x\n",
1680 			       save_len - len, val, le32_to_cpu(*image));
1681 			rc = -EIO;
1682 			errcnt++;
1683 			if (errcnt >= 20)
1684 				break;
1685 		}
1686 	}
1687 
1688 	if (!errcnt)
1689 		D_INFO("ucode image in INSTRUCTION memory is good\n");
1690 
1691 	return rc;
1692 }
1693 
1694 /*
1695  * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
1696  *   using sample data 100 bytes apart.  If these sample points are good,
1697  *   it's a pretty good bet that everything between them is good, too.
1698  */
1699 static int
1700 il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len)
1701 {
1702 	u32 val;
1703 	int rc = 0;
1704 	u32 errcnt = 0;
1705 	u32 i;
1706 
1707 	D_INFO("ucode inst image size is %u\n", len);
1708 
1709 	for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) {
1710 		/* read data comes through single port, auto-incr addr */
1711 		/* NOTE: Use the debugless read so we don't flood kernel log
1712 		 * if IL_DL_IO is set */
1713 		il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND);
1714 		val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1715 		if (val != le32_to_cpu(*image)) {
1716 #if 0				/* Enable this if you want to see details */
1717 			IL_ERR("uCode INST section is invalid at "
1718 			       "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val,
1719 			       *image);
1720 #endif
1721 			rc = -EIO;
1722 			errcnt++;
1723 			if (errcnt >= 3)
1724 				break;
1725 		}
1726 	}
1727 
1728 	return rc;
1729 }
1730 
1731 /*
1732  * il3945_verify_ucode - determine which instruction image is in SRAM,
1733  *    and verify its contents
1734  */
1735 static int
1736 il3945_verify_ucode(struct il_priv *il)
1737 {
1738 	__le32 *image;
1739 	u32 len;
1740 	int rc = 0;
1741 
1742 	/* Try bootstrap */
1743 	image = (__le32 *) il->ucode_boot.v_addr;
1744 	len = il->ucode_boot.len;
1745 	rc = il3945_verify_inst_sparse(il, image, len);
1746 	if (rc == 0) {
1747 		D_INFO("Bootstrap uCode is good in inst SRAM\n");
1748 		return 0;
1749 	}
1750 
1751 	/* Try initialize */
1752 	image = (__le32 *) il->ucode_init.v_addr;
1753 	len = il->ucode_init.len;
1754 	rc = il3945_verify_inst_sparse(il, image, len);
1755 	if (rc == 0) {
1756 		D_INFO("Initialize uCode is good in inst SRAM\n");
1757 		return 0;
1758 	}
1759 
1760 	/* Try runtime/protocol */
1761 	image = (__le32 *) il->ucode_code.v_addr;
1762 	len = il->ucode_code.len;
1763 	rc = il3945_verify_inst_sparse(il, image, len);
1764 	if (rc == 0) {
1765 		D_INFO("Runtime uCode is good in inst SRAM\n");
1766 		return 0;
1767 	}
1768 
1769 	IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
1770 
1771 	/* Since nothing seems to match, show first several data entries in
1772 	 * instruction SRAM, so maybe visual inspection will give a clue.
1773 	 * Selection of bootstrap image (vs. other images) is arbitrary. */
1774 	image = (__le32 *) il->ucode_boot.v_addr;
1775 	len = il->ucode_boot.len;
1776 	rc = il3945_verify_inst_full(il, image, len);
1777 
1778 	return rc;
1779 }
1780 
1781 static void
1782 il3945_nic_start(struct il_priv *il)
1783 {
1784 	/* Remove all resets to allow NIC to operate */
1785 	_il_wr(il, CSR_RESET, 0);
1786 }
1787 
1788 #define IL3945_UCODE_GET(item)						\
1789 static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
1790 {									\
1791 	return le32_to_cpu(ucode->v1.item);				\
1792 }
1793 
1794 static u32
1795 il3945_ucode_get_header_size(u32 api_ver)
1796 {
1797 	return 24;
1798 }
1799 
1800 static u8 *
1801 il3945_ucode_get_data(const struct il_ucode_header *ucode)
1802 {
1803 	return (u8 *) ucode->v1.data;
1804 }
1805 
1806 IL3945_UCODE_GET(inst_size);
1807 IL3945_UCODE_GET(data_size);
1808 IL3945_UCODE_GET(init_size);
1809 IL3945_UCODE_GET(init_data_size);
1810 IL3945_UCODE_GET(boot_size);
1811 
1812 /*
1813  * il3945_read_ucode - Read uCode images from disk file.
1814  *
1815  * Copy into buffers for card to fetch via bus-mastering
1816  */
1817 static int
1818 il3945_read_ucode(struct il_priv *il)
1819 {
1820 	const struct il_ucode_header *ucode;
1821 	int ret = -EINVAL, idx;
1822 	const struct firmware *ucode_raw;
1823 	/* firmware file name contains uCode/driver compatibility version */
1824 	const char *name_pre = il->cfg->fw_name_pre;
1825 	const unsigned int api_max = il->cfg->ucode_api_max;
1826 	const unsigned int api_min = il->cfg->ucode_api_min;
1827 	char buf[25];
1828 	u8 *src;
1829 	size_t len;
1830 	u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
1831 
1832 	/* Ask kernel firmware_class module to get the boot firmware off disk.
1833 	 * request_firmware() is synchronous, file is in memory on return. */
1834 	for (idx = api_max; idx >= api_min; idx--) {
1835 		sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
1836 		ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
1837 		if (ret < 0) {
1838 			IL_ERR("%s firmware file req failed: %d\n", buf, ret);
1839 			if (ret == -ENOENT)
1840 				continue;
1841 			else
1842 				goto error;
1843 		} else {
1844 			if (idx < api_max)
1845 				IL_ERR("Loaded firmware %s, "
1846 				       "which is deprecated. "
1847 				       " Please use API v%u instead.\n", buf,
1848 				       api_max);
1849 			D_INFO("Got firmware '%s' file "
1850 			       "(%zd bytes) from disk\n", buf, ucode_raw->size);
1851 			break;
1852 		}
1853 	}
1854 
1855 	if (ret < 0)
1856 		goto error;
1857 
1858 	/* Make sure that we got at least our header! */
1859 	if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
1860 		IL_ERR("File size way too small!\n");
1861 		ret = -EINVAL;
1862 		goto err_release;
1863 	}
1864 
1865 	/* Data from ucode file:  header followed by uCode images */
1866 	ucode = (struct il_ucode_header *)ucode_raw->data;
1867 
1868 	il->ucode_ver = le32_to_cpu(ucode->ver);
1869 	api_ver = IL_UCODE_API(il->ucode_ver);
1870 	inst_size = il3945_ucode_get_inst_size(ucode);
1871 	data_size = il3945_ucode_get_data_size(ucode);
1872 	init_size = il3945_ucode_get_init_size(ucode);
1873 	init_data_size = il3945_ucode_get_init_data_size(ucode);
1874 	boot_size = il3945_ucode_get_boot_size(ucode);
1875 	src = il3945_ucode_get_data(ucode);
1876 
1877 	/* api_ver should match the api version forming part of the
1878 	 * firmware filename ... but we don't check for that and only rely
1879 	 * on the API version read from firmware header from here on forward */
1880 
1881 	if (api_ver < api_min || api_ver > api_max) {
1882 		IL_ERR("Driver unable to support your firmware API. "
1883 		       "Driver supports v%u, firmware is v%u.\n", api_max,
1884 		       api_ver);
1885 		il->ucode_ver = 0;
1886 		ret = -EINVAL;
1887 		goto err_release;
1888 	}
1889 	if (api_ver != api_max)
1890 		IL_ERR("Firmware has old API version. Expected %u, "
1891 		       "got %u. New firmware can be obtained "
1892 		       "from http://www.intellinuxwireless.org.\n", api_max,
1893 		       api_ver);
1894 
1895 	IL_INFO("loaded firmware version %u.%u.%u.%u\n",
1896 		IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
1897 		IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
1898 
1899 	snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
1900 		 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
1901 		 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
1902 		 IL_UCODE_SERIAL(il->ucode_ver));
1903 
1904 	D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
1905 	D_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
1906 	D_INFO("f/w package hdr runtime data size = %u\n", data_size);
1907 	D_INFO("f/w package hdr init inst size = %u\n", init_size);
1908 	D_INFO("f/w package hdr init data size = %u\n", init_data_size);
1909 	D_INFO("f/w package hdr boot inst size = %u\n", boot_size);
1910 
1911 	/* Verify size of file vs. image size info in file's header */
1912 	if (ucode_raw->size !=
1913 	    il3945_ucode_get_header_size(api_ver) + inst_size + data_size +
1914 	    init_size + init_data_size + boot_size) {
1915 
1916 		D_INFO("uCode file size %zd does not match expected size\n",
1917 		       ucode_raw->size);
1918 		ret = -EINVAL;
1919 		goto err_release;
1920 	}
1921 
1922 	/* Verify that uCode images will fit in card's SRAM */
1923 	if (inst_size > IL39_MAX_INST_SIZE) {
1924 		D_INFO("uCode instr len %d too large to fit in\n", inst_size);
1925 		ret = -EINVAL;
1926 		goto err_release;
1927 	}
1928 
1929 	if (data_size > IL39_MAX_DATA_SIZE) {
1930 		D_INFO("uCode data len %d too large to fit in\n", data_size);
1931 		ret = -EINVAL;
1932 		goto err_release;
1933 	}
1934 	if (init_size > IL39_MAX_INST_SIZE) {
1935 		D_INFO("uCode init instr len %d too large to fit in\n",
1936 		       init_size);
1937 		ret = -EINVAL;
1938 		goto err_release;
1939 	}
1940 	if (init_data_size > IL39_MAX_DATA_SIZE) {
1941 		D_INFO("uCode init data len %d too large to fit in\n",
1942 		       init_data_size);
1943 		ret = -EINVAL;
1944 		goto err_release;
1945 	}
1946 	if (boot_size > IL39_MAX_BSM_SIZE) {
1947 		D_INFO("uCode boot instr len %d too large to fit in\n",
1948 		       boot_size);
1949 		ret = -EINVAL;
1950 		goto err_release;
1951 	}
1952 
1953 	/* Allocate ucode buffers for card's bus-master loading ... */
1954 
1955 	/* Runtime instructions and 2 copies of data:
1956 	 * 1) unmodified from disk
1957 	 * 2) backup cache for save/restore during power-downs */
1958 	il->ucode_code.len = inst_size;
1959 	il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
1960 
1961 	il->ucode_data.len = data_size;
1962 	il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
1963 
1964 	il->ucode_data_backup.len = data_size;
1965 	il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
1966 
1967 	if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
1968 	    !il->ucode_data_backup.v_addr)
1969 		goto err_pci_alloc;
1970 
1971 	/* Initialization instructions and data */
1972 	if (init_size && init_data_size) {
1973 		il->ucode_init.len = init_size;
1974 		il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
1975 
1976 		il->ucode_init_data.len = init_data_size;
1977 		il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
1978 
1979 		if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
1980 			goto err_pci_alloc;
1981 	}
1982 
1983 	/* Bootstrap (instructions only, no data) */
1984 	if (boot_size) {
1985 		il->ucode_boot.len = boot_size;
1986 		il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
1987 
1988 		if (!il->ucode_boot.v_addr)
1989 			goto err_pci_alloc;
1990 	}
1991 
1992 	/* Copy images into buffers for card's bus-master reads ... */
1993 
1994 	/* Runtime instructions (first block of data in file) */
1995 	len = inst_size;
1996 	D_INFO("Copying (but not loading) uCode instr len %zd\n", len);
1997 	memcpy(il->ucode_code.v_addr, src, len);
1998 	src += len;
1999 
2000 	D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
2001 	       il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
2002 
2003 	/* Runtime data (2nd block)
2004 	 * NOTE:  Copy into backup buffer will be done in il3945_up()  */
2005 	len = data_size;
2006 	D_INFO("Copying (but not loading) uCode data len %zd\n", len);
2007 	memcpy(il->ucode_data.v_addr, src, len);
2008 	memcpy(il->ucode_data_backup.v_addr, src, len);
2009 	src += len;
2010 
2011 	/* Initialization instructions (3rd block) */
2012 	if (init_size) {
2013 		len = init_size;
2014 		D_INFO("Copying (but not loading) init instr len %zd\n", len);
2015 		memcpy(il->ucode_init.v_addr, src, len);
2016 		src += len;
2017 	}
2018 
2019 	/* Initialization data (4th block) */
2020 	if (init_data_size) {
2021 		len = init_data_size;
2022 		D_INFO("Copying (but not loading) init data len %zd\n", len);
2023 		memcpy(il->ucode_init_data.v_addr, src, len);
2024 		src += len;
2025 	}
2026 
2027 	/* Bootstrap instructions (5th block) */
2028 	len = boot_size;
2029 	D_INFO("Copying (but not loading) boot instr len %zd\n", len);
2030 	memcpy(il->ucode_boot.v_addr, src, len);
2031 
2032 	/* We have our copies now, allow OS release its copies */
2033 	release_firmware(ucode_raw);
2034 	return 0;
2035 
2036 err_pci_alloc:
2037 	IL_ERR("failed to allocate pci memory\n");
2038 	ret = -ENOMEM;
2039 	il3945_dealloc_ucode_pci(il);
2040 
2041 err_release:
2042 	release_firmware(ucode_raw);
2043 
2044 error:
2045 	return ret;
2046 }
2047 
2048 /*
2049  * il3945_set_ucode_ptrs - Set uCode address location
2050  *
2051  * Tell initialization uCode where to find runtime uCode.
2052  *
2053  * BSM registers initially contain pointers to initialization uCode.
2054  * We need to replace them to load runtime uCode inst and data,
2055  * and to save runtime data when powering down.
2056  */
2057 static int
2058 il3945_set_ucode_ptrs(struct il_priv *il)
2059 {
2060 	dma_addr_t pinst;
2061 	dma_addr_t pdata;
2062 
2063 	/* bits 31:0 for 3945 */
2064 	pinst = il->ucode_code.p_addr;
2065 	pdata = il->ucode_data_backup.p_addr;
2066 
2067 	/* Tell bootstrap uCode where to find image to load */
2068 	il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
2069 	il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
2070 	il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len);
2071 
2072 	/* Inst byte count must be last to set up, bit 31 signals uCode
2073 	 *   that all new ptr/size info is in place */
2074 	il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
2075 		   il->ucode_code.len | BSM_DRAM_INST_LOAD);
2076 
2077 	D_INFO("Runtime uCode pointers are set.\n");
2078 
2079 	return 0;
2080 }
2081 
2082 /*
2083  * il3945_init_alive_start - Called after N_ALIVE notification received
2084  *
2085  * Called after N_ALIVE notification received from "initialize" uCode.
2086  *
2087  * Tell "initialize" uCode to go ahead and load the runtime uCode.
2088  */
2089 static void
2090 il3945_init_alive_start(struct il_priv *il)
2091 {
2092 	/* Check alive response for "valid" sign from uCode */
2093 	if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
2094 		/* We had an error bringing up the hardware, so take it
2095 		 * all the way back down so we can try again */
2096 		D_INFO("Initialize Alive failed.\n");
2097 		goto restart;
2098 	}
2099 
2100 	/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
2101 	 * This is a paranoid check, because we would not have gotten the
2102 	 * "initialize" alive if code weren't properly loaded.  */
2103 	if (il3945_verify_ucode(il)) {
2104 		/* Runtime instruction load was bad;
2105 		 * take it all the way back down so we can try again */
2106 		D_INFO("Bad \"initialize\" uCode load.\n");
2107 		goto restart;
2108 	}
2109 
2110 	/* Send pointers to protocol/runtime uCode image ... init code will
2111 	 * load and launch runtime uCode, which will send us another "Alive"
2112 	 * notification. */
2113 	D_INFO("Initialization Alive received.\n");
2114 	if (il3945_set_ucode_ptrs(il)) {
2115 		/* Runtime instruction load won't happen;
2116 		 * take it all the way back down so we can try again */
2117 		D_INFO("Couldn't set up uCode pointers.\n");
2118 		goto restart;
2119 	}
2120 	return;
2121 
2122 restart:
2123 	queue_work(il->workqueue, &il->restart);
2124 }
2125 
2126 /*
2127  * il3945_alive_start - called after N_ALIVE notification received
2128  *                   from protocol/runtime uCode (initialization uCode's
2129  *                   Alive gets handled by il3945_init_alive_start()).
2130  */
2131 static void
2132 il3945_alive_start(struct il_priv *il)
2133 {
2134 	int thermal_spin = 0;
2135 	u32 rfkill;
2136 
2137 	D_INFO("Runtime Alive received.\n");
2138 
2139 	if (il->card_alive.is_valid != UCODE_VALID_OK) {
2140 		/* We had an error bringing up the hardware, so take it
2141 		 * all the way back down so we can try again */
2142 		D_INFO("Alive failed.\n");
2143 		goto restart;
2144 	}
2145 
2146 	/* Initialize uCode has loaded Runtime uCode ... verify inst image.
2147 	 * This is a paranoid check, because we would not have gotten the
2148 	 * "runtime" alive if code weren't properly loaded.  */
2149 	if (il3945_verify_ucode(il)) {
2150 		/* Runtime instruction load was bad;
2151 		 * take it all the way back down so we can try again */
2152 		D_INFO("Bad runtime uCode load.\n");
2153 		goto restart;
2154 	}
2155 
2156 	rfkill = il_rd_prph(il, APMG_RFKILL_REG);
2157 	D_INFO("RFKILL status: 0x%x\n", rfkill);
2158 
2159 	if (rfkill & 0x1) {
2160 		clear_bit(S_RFKILL, &il->status);
2161 		/* if RFKILL is not on, then wait for thermal
2162 		 * sensor in adapter to kick in */
2163 		while (il3945_hw_get_temperature(il) == 0) {
2164 			thermal_spin++;
2165 			udelay(10);
2166 		}
2167 
2168 		if (thermal_spin)
2169 			D_INFO("Thermal calibration took %dus\n",
2170 			       thermal_spin * 10);
2171 	} else
2172 		set_bit(S_RFKILL, &il->status);
2173 
2174 	/* After the ALIVE response, we can send commands to 3945 uCode */
2175 	set_bit(S_ALIVE, &il->status);
2176 
2177 	/* Enable watchdog to monitor the driver tx queues */
2178 	il_setup_watchdog(il);
2179 
2180 	if (il_is_rfkill(il))
2181 		return;
2182 
2183 	ieee80211_wake_queues(il->hw);
2184 
2185 	il->active_rate = RATES_MASK_3945;
2186 
2187 	il_power_update_mode(il, true);
2188 
2189 	if (il_is_associated(il)) {
2190 		struct il3945_rxon_cmd *active_rxon =
2191 		    (struct il3945_rxon_cmd *)(&il->active);
2192 
2193 		il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2194 		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2195 	} else {
2196 		/* Initialize our rx_config data */
2197 		il_connection_init_rx_config(il);
2198 	}
2199 
2200 	/* Configure Bluetooth device coexistence support */
2201 	il_send_bt_config(il);
2202 
2203 	set_bit(S_READY, &il->status);
2204 
2205 	/* Configure the adapter for unassociated operation */
2206 	il3945_commit_rxon(il);
2207 
2208 	il3945_reg_txpower_periodic(il);
2209 
2210 	D_INFO("ALIVE processing complete.\n");
2211 	wake_up(&il->wait_command_queue);
2212 
2213 	return;
2214 
2215 restart:
2216 	queue_work(il->workqueue, &il->restart);
2217 }
2218 
2219 static void il3945_cancel_deferred_work(struct il_priv *il);
2220 
2221 static void
2222 __il3945_down(struct il_priv *il)
2223 {
2224 	unsigned long flags;
2225 	int exit_pending;
2226 
2227 	D_INFO(DRV_NAME " is going down\n");
2228 
2229 	il_scan_cancel_timeout(il, 200);
2230 
2231 	exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
2232 
2233 	/* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
2234 	 * to prevent rearm timer */
2235 	del_timer_sync(&il->watchdog);
2236 
2237 	/* Station information will now be cleared in device */
2238 	il_clear_ucode_stations(il);
2239 	il_dealloc_bcast_stations(il);
2240 	il_clear_driver_stations(il);
2241 
2242 	/* Unblock any waiting calls */
2243 	wake_up_all(&il->wait_command_queue);
2244 
2245 	/* Wipe out the EXIT_PENDING status bit if we are not actually
2246 	 * exiting the module */
2247 	if (!exit_pending)
2248 		clear_bit(S_EXIT_PENDING, &il->status);
2249 
2250 	/* stop and reset the on-board processor */
2251 	_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2252 
2253 	/* tell the device to stop sending interrupts */
2254 	spin_lock_irqsave(&il->lock, flags);
2255 	il_disable_interrupts(il);
2256 	spin_unlock_irqrestore(&il->lock, flags);
2257 	il3945_synchronize_irq(il);
2258 
2259 	if (il->mac80211_registered)
2260 		ieee80211_stop_queues(il->hw);
2261 
2262 	/* If we have not previously called il3945_init() then
2263 	 * clear all bits but the RF Kill bits and return */
2264 	if (!il_is_init(il)) {
2265 		il->status =
2266 		    test_bit(S_RFKILL, &il->status) << S_RFKILL |
2267 		    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2268 		    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2269 		goto exit;
2270 	}
2271 
2272 	/* ...otherwise clear out all the status bits but the RF Kill
2273 	 * bit and continue taking the NIC down. */
2274 	il->status &=
2275 	    test_bit(S_RFKILL, &il->status) << S_RFKILL |
2276 	    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2277 	    test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
2278 	    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2279 
2280 	/*
2281 	 * We disabled and synchronized interrupt, and priv->mutex is taken, so
2282 	 * here is the only thread which will program device registers, but
2283 	 * still have lockdep assertions, so we are taking reg_lock.
2284 	 */
2285 	spin_lock_irq(&il->reg_lock);
2286 	/* FIXME: il_grab_nic_access if rfkill is off ? */
2287 
2288 	il3945_hw_txq_ctx_stop(il);
2289 	il3945_hw_rxq_stop(il);
2290 	/* Power-down device's busmaster DMA clocks */
2291 	_il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2292 	udelay(5);
2293 	/* Stop the device, and put it in low power state */
2294 	_il_apm_stop(il);
2295 
2296 	spin_unlock_irq(&il->reg_lock);
2297 
2298 	il3945_hw_txq_ctx_free(il);
2299 exit:
2300 	memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
2301 	dev_kfree_skb(il->beacon_skb);
2302 	il->beacon_skb = NULL;
2303 
2304 	/* clear out any free frames */
2305 	il3945_clear_free_frames(il);
2306 }
2307 
2308 static void
2309 il3945_down(struct il_priv *il)
2310 {
2311 	mutex_lock(&il->mutex);
2312 	__il3945_down(il);
2313 	mutex_unlock(&il->mutex);
2314 
2315 	il3945_cancel_deferred_work(il);
2316 }
2317 
2318 #define MAX_HW_RESTARTS 5
2319 
2320 static int
2321 il3945_alloc_bcast_station(struct il_priv *il)
2322 {
2323 	unsigned long flags;
2324 	u8 sta_id;
2325 
2326 	spin_lock_irqsave(&il->sta_lock, flags);
2327 	sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
2328 	if (sta_id == IL_INVALID_STATION) {
2329 		IL_ERR("Unable to prepare broadcast station\n");
2330 		spin_unlock_irqrestore(&il->sta_lock, flags);
2331 
2332 		return -EINVAL;
2333 	}
2334 
2335 	il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
2336 	il->stations[sta_id].used |= IL_STA_BCAST;
2337 	spin_unlock_irqrestore(&il->sta_lock, flags);
2338 
2339 	return 0;
2340 }
2341 
2342 static int
2343 __il3945_up(struct il_priv *il)
2344 {
2345 	int rc, i;
2346 
2347 	rc = il3945_alloc_bcast_station(il);
2348 	if (rc)
2349 		return rc;
2350 
2351 	if (test_bit(S_EXIT_PENDING, &il->status)) {
2352 		IL_WARN("Exit pending; will not bring the NIC up\n");
2353 		return -EIO;
2354 	}
2355 
2356 	if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
2357 		IL_ERR("ucode not available for device bring up\n");
2358 		return -EIO;
2359 	}
2360 
2361 	/* If platform's RF_KILL switch is NOT set to KILL */
2362 	if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2363 		clear_bit(S_RFKILL, &il->status);
2364 	else {
2365 		set_bit(S_RFKILL, &il->status);
2366 		return -ERFKILL;
2367 	}
2368 
2369 	_il_wr(il, CSR_INT, 0xFFFFFFFF);
2370 
2371 	rc = il3945_hw_nic_init(il);
2372 	if (rc) {
2373 		IL_ERR("Unable to int nic\n");
2374 		return rc;
2375 	}
2376 
2377 	/* make sure rfkill handshake bits are cleared */
2378 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2379 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2380 
2381 	/* clear (again), then enable host interrupts */
2382 	_il_wr(il, CSR_INT, 0xFFFFFFFF);
2383 	il_enable_interrupts(il);
2384 
2385 	/* really make sure rfkill handshake bits are cleared */
2386 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2387 	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2388 
2389 	/* Copy original ucode data image from disk into backup cache.
2390 	 * This will be used to initialize the on-board processor's
2391 	 * data SRAM for a clean start when the runtime program first loads. */
2392 	memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
2393 	       il->ucode_data.len);
2394 
2395 	/* We return success when we resume from suspend and rf_kill is on. */
2396 	if (test_bit(S_RFKILL, &il->status))
2397 		return 0;
2398 
2399 	for (i = 0; i < MAX_HW_RESTARTS; i++) {
2400 
2401 		/* load bootstrap state machine,
2402 		 * load bootstrap program into processor's memory,
2403 		 * prepare to load the "initialize" uCode */
2404 		rc = il->ops->load_ucode(il);
2405 
2406 		if (rc) {
2407 			IL_ERR("Unable to set up bootstrap uCode: %d\n", rc);
2408 			continue;
2409 		}
2410 
2411 		/* start card; "initialize" will load runtime ucode */
2412 		il3945_nic_start(il);
2413 
2414 		D_INFO(DRV_NAME " is coming up\n");
2415 
2416 		return 0;
2417 	}
2418 
2419 	set_bit(S_EXIT_PENDING, &il->status);
2420 	__il3945_down(il);
2421 	clear_bit(S_EXIT_PENDING, &il->status);
2422 
2423 	/* tried to restart and config the device for as long as our
2424 	 * patience could withstand */
2425 	IL_ERR("Unable to initialize device after %d attempts.\n", i);
2426 	return -EIO;
2427 }
2428 
2429 /*****************************************************************************
2430  *
2431  * Workqueue callbacks
2432  *
2433  *****************************************************************************/
2434 
2435 static void
2436 il3945_bg_init_alive_start(struct work_struct *data)
2437 {
2438 	struct il_priv *il =
2439 	    container_of(data, struct il_priv, init_alive_start.work);
2440 
2441 	mutex_lock(&il->mutex);
2442 	if (test_bit(S_EXIT_PENDING, &il->status))
2443 		goto out;
2444 
2445 	il3945_init_alive_start(il);
2446 out:
2447 	mutex_unlock(&il->mutex);
2448 }
2449 
2450 static void
2451 il3945_bg_alive_start(struct work_struct *data)
2452 {
2453 	struct il_priv *il =
2454 	    container_of(data, struct il_priv, alive_start.work);
2455 
2456 	mutex_lock(&il->mutex);
2457 	if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
2458 		goto out;
2459 
2460 	il3945_alive_start(il);
2461 out:
2462 	mutex_unlock(&il->mutex);
2463 }
2464 
2465 /*
2466  * 3945 cannot interrupt driver when hardware rf kill switch toggles;
2467  * driver must poll CSR_GP_CNTRL_REG register for change.  This register
2468  * *is* readable even when device has been SW_RESET into low power mode
2469  * (e.g. during RF KILL).
2470  */
2471 static void
2472 il3945_rfkill_poll(struct work_struct *data)
2473 {
2474 	struct il_priv *il =
2475 	    container_of(data, struct il_priv, _3945.rfkill_poll.work);
2476 	bool old_rfkill = test_bit(S_RFKILL, &il->status);
2477 	bool new_rfkill =
2478 	    !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
2479 
2480 	if (new_rfkill != old_rfkill) {
2481 		if (new_rfkill)
2482 			set_bit(S_RFKILL, &il->status);
2483 		else
2484 			clear_bit(S_RFKILL, &il->status);
2485 
2486 		wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
2487 
2488 		D_RF_KILL("RF_KILL bit toggled to %s.\n",
2489 			  new_rfkill ? "disable radio" : "enable radio");
2490 	}
2491 
2492 	/* Keep this running, even if radio now enabled.  This will be
2493 	 * cancelled in mac_start() if system decides to start again */
2494 	queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2495 			   round_jiffies_relative(2 * HZ));
2496 
2497 }
2498 
2499 int
2500 il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
2501 {
2502 	struct il_host_cmd cmd = {
2503 		.id = C_SCAN,
2504 		.len = sizeof(struct il3945_scan_cmd),
2505 		.flags = CMD_SIZE_HUGE,
2506 	};
2507 	struct il3945_scan_cmd *scan;
2508 	u8 n_probes = 0;
2509 	enum nl80211_band band;
2510 	bool is_active = false;
2511 	int ret;
2512 	u16 len;
2513 
2514 	lockdep_assert_held(&il->mutex);
2515 
2516 	if (!il->scan_cmd) {
2517 		il->scan_cmd =
2518 		    kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE,
2519 			    GFP_KERNEL);
2520 		if (!il->scan_cmd) {
2521 			D_SCAN("Fail to allocate scan memory\n");
2522 			return -ENOMEM;
2523 		}
2524 	}
2525 	scan = il->scan_cmd;
2526 	memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);
2527 
2528 	scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
2529 	scan->quiet_time = IL_ACTIVE_QUIET_TIME;
2530 
2531 	if (il_is_associated(il)) {
2532 		u16 interval;
2533 		u32 extra;
2534 		u32 suspend_time = 100;
2535 		u32 scan_suspend_time = 100;
2536 
2537 		D_INFO("Scanning while associated...\n");
2538 
2539 		interval = vif->bss_conf.beacon_int;
2540 
2541 		scan->suspend_time = 0;
2542 		scan->max_out_time = cpu_to_le32(200 * 1024);
2543 		if (!interval)
2544 			interval = suspend_time;
2545 		/*
2546 		 * suspend time format:
2547 		 *  0-19: beacon interval in usec (time before exec.)
2548 		 * 20-23: 0
2549 		 * 24-31: number of beacons (suspend between channels)
2550 		 */
2551 
2552 		extra = (suspend_time / interval) << 24;
2553 		scan_suspend_time =
2554 		    0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024));
2555 
2556 		scan->suspend_time = cpu_to_le32(scan_suspend_time);
2557 		D_SCAN("suspend_time 0x%X beacon interval %d\n",
2558 		       scan_suspend_time, interval);
2559 	}
2560 
2561 	if (il->scan_request->n_ssids) {
2562 		int i, p = 0;
2563 		D_SCAN("Kicking off active scan\n");
2564 		for (i = 0; i < il->scan_request->n_ssids; i++) {
2565 			/* always does wildcard anyway */
2566 			if (!il->scan_request->ssids[i].ssid_len)
2567 				continue;
2568 			scan->direct_scan[p].id = WLAN_EID_SSID;
2569 			scan->direct_scan[p].len =
2570 			    il->scan_request->ssids[i].ssid_len;
2571 			memcpy(scan->direct_scan[p].ssid,
2572 			       il->scan_request->ssids[i].ssid,
2573 			       il->scan_request->ssids[i].ssid_len);
2574 			n_probes++;
2575 			p++;
2576 		}
2577 		is_active = true;
2578 	} else
2579 		D_SCAN("Kicking off passive scan.\n");
2580 
2581 	/* We don't build a direct scan probe request; the uCode will do
2582 	 * that based on the direct_mask added to each channel entry */
2583 	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
2584 	scan->tx_cmd.sta_id = il->hw_params.bcast_id;
2585 	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2586 
2587 	/* flags + rate selection */
2588 
2589 	switch (il->scan_band) {
2590 	case NL80211_BAND_2GHZ:
2591 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
2592 		scan->tx_cmd.rate = RATE_1M_PLCP;
2593 		band = NL80211_BAND_2GHZ;
2594 		break;
2595 	case NL80211_BAND_5GHZ:
2596 		scan->tx_cmd.rate = RATE_6M_PLCP;
2597 		band = NL80211_BAND_5GHZ;
2598 		break;
2599 	default:
2600 		IL_WARN("Invalid scan band\n");
2601 		return -EIO;
2602 	}
2603 
2604 	/*
2605 	 * If active scaning is requested but a certain channel is marked
2606 	 * passive, we can do active scanning if we detect transmissions. For
2607 	 * passive only scanning disable switching to active on any channel.
2608 	 */
2609 	scan->good_CRC_th =
2610 	    is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
2611 
2612 	len =
2613 	    il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
2614 			      vif->addr, il->scan_request->ie,
2615 			      il->scan_request->ie_len,
2616 			      IL_MAX_SCAN_SIZE - sizeof(*scan));
2617 	scan->tx_cmd.len = cpu_to_le16(len);
2618 
2619 	/* select Rx antennas */
2620 	scan->flags |= il3945_get_antenna_flags(il);
2621 
2622 	scan->channel_count =
2623 	    il3945_get_channels_for_scan(il, band, is_active, n_probes,
2624 					 (void *)&scan->data[len], vif);
2625 	if (scan->channel_count == 0) {
2626 		D_SCAN("channel count %d\n", scan->channel_count);
2627 		return -EIO;
2628 	}
2629 
2630 	cmd.len +=
2631 	    le16_to_cpu(scan->tx_cmd.len) +
2632 	    scan->channel_count * sizeof(struct il3945_scan_channel);
2633 	cmd.data = scan;
2634 	scan->len = cpu_to_le16(cmd.len);
2635 
2636 	set_bit(S_SCAN_HW, &il->status);
2637 	ret = il_send_cmd_sync(il, &cmd);
2638 	if (ret)
2639 		clear_bit(S_SCAN_HW, &il->status);
2640 	return ret;
2641 }
2642 
2643 void
2644 il3945_post_scan(struct il_priv *il)
2645 {
2646 	/*
2647 	 * Since setting the RXON may have been deferred while
2648 	 * performing the scan, fire one off if needed
2649 	 */
2650 	if (memcmp(&il->staging, &il->active, sizeof(il->staging)))
2651 		il3945_commit_rxon(il);
2652 }
2653 
2654 static void
2655 il3945_bg_restart(struct work_struct *data)
2656 {
2657 	struct il_priv *il = container_of(data, struct il_priv, restart);
2658 
2659 	if (test_bit(S_EXIT_PENDING, &il->status))
2660 		return;
2661 
2662 	if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
2663 		mutex_lock(&il->mutex);
2664 		il->is_open = 0;
2665 		mutex_unlock(&il->mutex);
2666 		il3945_down(il);
2667 		ieee80211_restart_hw(il->hw);
2668 	} else {
2669 		il3945_down(il);
2670 
2671 		mutex_lock(&il->mutex);
2672 		if (test_bit(S_EXIT_PENDING, &il->status)) {
2673 			mutex_unlock(&il->mutex);
2674 			return;
2675 		}
2676 
2677 		__il3945_up(il);
2678 		mutex_unlock(&il->mutex);
2679 	}
2680 }
2681 
2682 static void
2683 il3945_bg_rx_replenish(struct work_struct *data)
2684 {
2685 	struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
2686 
2687 	mutex_lock(&il->mutex);
2688 	if (test_bit(S_EXIT_PENDING, &il->status))
2689 		goto out;
2690 
2691 	il3945_rx_replenish(il);
2692 out:
2693 	mutex_unlock(&il->mutex);
2694 }
2695 
2696 void
2697 il3945_post_associate(struct il_priv *il)
2698 {
2699 	int rc = 0;
2700 
2701 	if (!il->vif || !il->is_open)
2702 		return;
2703 
2704 	D_ASSOC("Associated as %d to: %pM\n", il->vif->cfg.aid,
2705 		il->active.bssid_addr);
2706 
2707 	if (test_bit(S_EXIT_PENDING, &il->status))
2708 		return;
2709 
2710 	il_scan_cancel_timeout(il, 200);
2711 
2712 	il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2713 	il3945_commit_rxon(il);
2714 
2715 	rc = il_send_rxon_timing(il);
2716 	if (rc)
2717 		IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n");
2718 
2719 	il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2720 
2721 	il->staging.assoc_id = cpu_to_le16(il->vif->cfg.aid);
2722 
2723 	D_ASSOC("assoc id %d beacon interval %d\n", il->vif->cfg.aid,
2724 		il->vif->bss_conf.beacon_int);
2725 
2726 	if (il->vif->bss_conf.use_short_preamble)
2727 		il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2728 	else
2729 		il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2730 
2731 	if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2732 		if (il->vif->bss_conf.use_short_slot)
2733 			il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2734 		else
2735 			il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2736 	}
2737 
2738 	il3945_commit_rxon(il);
2739 
2740 	switch (il->vif->type) {
2741 	case NL80211_IFTYPE_STATION:
2742 		il3945_rate_scale_init(il->hw, IL_AP_ID);
2743 		break;
2744 	case NL80211_IFTYPE_ADHOC:
2745 		il3945_send_beacon_cmd(il);
2746 		break;
2747 	default:
2748 		IL_ERR("%s Should not be called in %d mode\n", __func__,
2749 		      il->vif->type);
2750 		break;
2751 	}
2752 }
2753 
2754 /*****************************************************************************
2755  *
2756  * mac80211 entry point functions
2757  *
2758  *****************************************************************************/
2759 
2760 #define UCODE_READY_TIMEOUT	(2 * HZ)
2761 
2762 static int
2763 il3945_mac_start(struct ieee80211_hw *hw)
2764 {
2765 	struct il_priv *il = hw->priv;
2766 	int ret;
2767 
2768 	/* we should be verifying the device is ready to be opened */
2769 	mutex_lock(&il->mutex);
2770 	D_MAC80211("enter\n");
2771 
2772 	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
2773 	 * ucode filename and max sizes are card-specific. */
2774 
2775 	if (!il->ucode_code.len) {
2776 		ret = il3945_read_ucode(il);
2777 		if (ret) {
2778 			IL_ERR("Could not read microcode: %d\n", ret);
2779 			mutex_unlock(&il->mutex);
2780 			goto out_release_irq;
2781 		}
2782 	}
2783 
2784 	ret = __il3945_up(il);
2785 
2786 	mutex_unlock(&il->mutex);
2787 
2788 	if (ret)
2789 		goto out_release_irq;
2790 
2791 	D_INFO("Start UP work.\n");
2792 
2793 	/* Wait for START_ALIVE from ucode. Otherwise callbacks from
2794 	 * mac80211 will not be run successfully. */
2795 	ret = wait_event_timeout(il->wait_command_queue,
2796 				 test_bit(S_READY, &il->status),
2797 				 UCODE_READY_TIMEOUT);
2798 	if (!ret) {
2799 		if (!test_bit(S_READY, &il->status)) {
2800 			IL_ERR("Wait for START_ALIVE timeout after %dms.\n",
2801 			       jiffies_to_msecs(UCODE_READY_TIMEOUT));
2802 			ret = -ETIMEDOUT;
2803 			goto out_release_irq;
2804 		}
2805 	}
2806 
2807 	/* ucode is running and will send rfkill notifications,
2808 	 * no need to poll the killswitch state anymore */
2809 	cancel_delayed_work(&il->_3945.rfkill_poll);
2810 
2811 	il->is_open = 1;
2812 	D_MAC80211("leave\n");
2813 	return 0;
2814 
2815 out_release_irq:
2816 	il->is_open = 0;
2817 	D_MAC80211("leave - failed\n");
2818 	return ret;
2819 }
2820 
2821 static void
2822 il3945_mac_stop(struct ieee80211_hw *hw)
2823 {
2824 	struct il_priv *il = hw->priv;
2825 
2826 	D_MAC80211("enter\n");
2827 
2828 	if (!il->is_open) {
2829 		D_MAC80211("leave - skip\n");
2830 		return;
2831 	}
2832 
2833 	il->is_open = 0;
2834 
2835 	il3945_down(il);
2836 
2837 	flush_workqueue(il->workqueue);
2838 
2839 	/* start polling the killswitch state again */
2840 	queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2841 			   round_jiffies_relative(2 * HZ));
2842 
2843 	D_MAC80211("leave\n");
2844 }
2845 
2846 static void
2847 il3945_mac_tx(struct ieee80211_hw *hw,
2848 	       struct ieee80211_tx_control *control,
2849 	       struct sk_buff *skb)
2850 {
2851 	struct il_priv *il = hw->priv;
2852 
2853 	D_MAC80211("enter\n");
2854 
2855 	D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2856 	     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2857 
2858 	if (il3945_tx_skb(il, control->sta, skb))
2859 		dev_kfree_skb_any(skb);
2860 
2861 	D_MAC80211("leave\n");
2862 }
2863 
2864 void
2865 il3945_config_ap(struct il_priv *il)
2866 {
2867 	struct ieee80211_vif *vif = il->vif;
2868 	int rc = 0;
2869 
2870 	if (test_bit(S_EXIT_PENDING, &il->status))
2871 		return;
2872 
2873 	/* The following should be done only at AP bring up */
2874 	if (!(il_is_associated(il))) {
2875 
2876 		/* RXON - unassoc (to set timing command) */
2877 		il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2878 		il3945_commit_rxon(il);
2879 
2880 		/* RXON Timing */
2881 		rc = il_send_rxon_timing(il);
2882 		if (rc)
2883 			IL_WARN("C_RXON_TIMING failed - "
2884 				"Attempting to continue.\n");
2885 
2886 		il->staging.assoc_id = 0;
2887 
2888 		if (vif->bss_conf.use_short_preamble)
2889 			il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2890 		else
2891 			il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2892 
2893 		if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2894 			if (vif->bss_conf.use_short_slot)
2895 				il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2896 			else
2897 				il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2898 		}
2899 		/* restore RXON assoc */
2900 		il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2901 		il3945_commit_rxon(il);
2902 	}
2903 	il3945_send_beacon_cmd(il);
2904 }
2905 
2906 static int
2907 il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2908 		   struct ieee80211_vif *vif, struct ieee80211_sta *sta,
2909 		   struct ieee80211_key_conf *key)
2910 {
2911 	struct il_priv *il = hw->priv;
2912 	int ret = 0;
2913 	u8 sta_id = IL_INVALID_STATION;
2914 	u8 static_key;
2915 
2916 	D_MAC80211("enter\n");
2917 
2918 	if (il3945_mod_params.sw_crypto) {
2919 		D_MAC80211("leave - hwcrypto disabled\n");
2920 		return -EOPNOTSUPP;
2921 	}
2922 
2923 	/*
2924 	 * To support IBSS RSN, don't program group keys in IBSS, the
2925 	 * hardware will then not attempt to decrypt the frames.
2926 	 */
2927 	if (vif->type == NL80211_IFTYPE_ADHOC &&
2928 	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
2929 		D_MAC80211("leave - IBSS RSN\n");
2930 		return -EOPNOTSUPP;
2931 	}
2932 
2933 	static_key = !il_is_associated(il);
2934 
2935 	if (!static_key) {
2936 		sta_id = il_sta_id_or_broadcast(il, sta);
2937 		if (sta_id == IL_INVALID_STATION) {
2938 			D_MAC80211("leave - station not found\n");
2939 			return -EINVAL;
2940 		}
2941 	}
2942 
2943 	mutex_lock(&il->mutex);
2944 	il_scan_cancel_timeout(il, 100);
2945 
2946 	switch (cmd) {
2947 	case SET_KEY:
2948 		if (static_key)
2949 			ret = il3945_set_static_key(il, key);
2950 		else
2951 			ret = il3945_set_dynamic_key(il, key, sta_id);
2952 		D_MAC80211("enable hwcrypto key\n");
2953 		break;
2954 	case DISABLE_KEY:
2955 		if (static_key)
2956 			ret = il3945_remove_static_key(il);
2957 		else
2958 			ret = il3945_clear_sta_key_info(il, sta_id);
2959 		D_MAC80211("disable hwcrypto key\n");
2960 		break;
2961 	default:
2962 		ret = -EINVAL;
2963 	}
2964 
2965 	D_MAC80211("leave ret %d\n", ret);
2966 	mutex_unlock(&il->mutex);
2967 
2968 	return ret;
2969 }
2970 
2971 static int
2972 il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
2973 		   struct ieee80211_sta *sta)
2974 {
2975 	struct il_priv *il = hw->priv;
2976 	struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
2977 	int ret;
2978 	bool is_ap = vif->type == NL80211_IFTYPE_STATION;
2979 	u8 sta_id;
2980 
2981 	mutex_lock(&il->mutex);
2982 	D_INFO("station %pM\n", sta->addr);
2983 	sta_priv->common.sta_id = IL_INVALID_STATION;
2984 
2985 	ret = il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
2986 	if (ret) {
2987 		IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
2988 		/* Should we return success if return code is EEXIST ? */
2989 		mutex_unlock(&il->mutex);
2990 		return ret;
2991 	}
2992 
2993 	sta_priv->common.sta_id = sta_id;
2994 
2995 	/* Initialize rate scaling */
2996 	D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
2997 	il3945_rs_rate_init(il, sta, sta_id);
2998 	mutex_unlock(&il->mutex);
2999 
3000 	return 0;
3001 }
3002 
3003 static void
3004 il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
3005 			unsigned int *total_flags, u64 multicast)
3006 {
3007 	struct il_priv *il = hw->priv;
3008 	__le32 filter_or = 0, filter_nand = 0;
3009 
3010 #define CHK(test, flag)	do { \
3011 	if (*total_flags & (test))		\
3012 		filter_or |= (flag);		\
3013 	else					\
3014 		filter_nand |= (flag);		\
3015 	} while (0)
3016 
3017 	D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
3018 		   *total_flags);
3019 
3020 	CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK);
3021 	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
3022 	CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
3023 
3024 #undef CHK
3025 
3026 	mutex_lock(&il->mutex);
3027 
3028 	il->staging.filter_flags &= ~filter_nand;
3029 	il->staging.filter_flags |= filter_or;
3030 
3031 	/*
3032 	 * Not committing directly because hardware can perform a scan,
3033 	 * but even if hw is ready, committing here breaks for some reason,
3034 	 * we'll eventually commit the filter flags change anyway.
3035 	 */
3036 
3037 	mutex_unlock(&il->mutex);
3038 
3039 	/*
3040 	 * Receiving all multicast frames is always enabled by the
3041 	 * default flags setup in il_connection_init_rx_config()
3042 	 * since we currently do not support programming multicast
3043 	 * filters into the device.
3044 	 */
3045 	*total_flags &=
3046 	    FIF_OTHER_BSS | FIF_ALLMULTI |
3047 	    FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
3048 }
3049 
3050 /*****************************************************************************
3051  *
3052  * sysfs attributes
3053  *
3054  *****************************************************************************/
3055 
3056 #ifdef CONFIG_IWLEGACY_DEBUG
3057 
3058 /*
3059  * The following adds a new attribute to the sysfs representation
3060  * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
3061  * used for controlling the debug level.
3062  *
3063  * See the level definitions in iwl for details.
3064  *
3065  * The debug_level being managed using sysfs below is a per device debug
3066  * level that is used instead of the global debug level if it (the per
3067  * device debug level) is set.
3068  */
3069 static ssize_t
3070 il3945_show_debug_level(struct device *d, struct device_attribute *attr,
3071 			char *buf)
3072 {
3073 	struct il_priv *il = dev_get_drvdata(d);
3074 	return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
3075 }
3076 
3077 static ssize_t
3078 il3945_store_debug_level(struct device *d, struct device_attribute *attr,
3079 			 const char *buf, size_t count)
3080 {
3081 	struct il_priv *il = dev_get_drvdata(d);
3082 	unsigned long val;
3083 	int ret;
3084 
3085 	ret = kstrtoul(buf, 0, &val);
3086 	if (ret)
3087 		IL_INFO("%s is not in hex or decimal form.\n", buf);
3088 	else
3089 		il->debug_level = val;
3090 
3091 	return strnlen(buf, count);
3092 }
3093 
3094 static DEVICE_ATTR(debug_level, 0644, il3945_show_debug_level,
3095 		   il3945_store_debug_level);
3096 
3097 #endif /* CONFIG_IWLEGACY_DEBUG */
3098 
3099 static ssize_t
3100 il3945_show_temperature(struct device *d, struct device_attribute *attr,
3101 			char *buf)
3102 {
3103 	struct il_priv *il = dev_get_drvdata(d);
3104 
3105 	if (!il_is_alive(il))
3106 		return -EAGAIN;
3107 
3108 	return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
3109 }
3110 
3111 static DEVICE_ATTR(temperature, 0444, il3945_show_temperature, NULL);
3112 
3113 static ssize_t
3114 il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
3115 {
3116 	struct il_priv *il = dev_get_drvdata(d);
3117 	return sprintf(buf, "%d\n", il->tx_power_user_lmt);
3118 }
3119 
3120 static ssize_t
3121 il3945_store_tx_power(struct device *d, struct device_attribute *attr,
3122 		      const char *buf, size_t count)
3123 {
3124 	struct il_priv *il = dev_get_drvdata(d);
3125 	char *p = (char *)buf;
3126 	u32 val;
3127 
3128 	val = simple_strtoul(p, &p, 10);
3129 	if (p == buf)
3130 		IL_INFO(": %s is not in decimal form.\n", buf);
3131 	else
3132 		il3945_hw_reg_set_txpower(il, val);
3133 
3134 	return count;
3135 }
3136 
3137 static DEVICE_ATTR(tx_power, 0644, il3945_show_tx_power, il3945_store_tx_power);
3138 
3139 static ssize_t
3140 il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf)
3141 {
3142 	struct il_priv *il = dev_get_drvdata(d);
3143 
3144 	return sprintf(buf, "0x%04X\n", il->active.flags);
3145 }
3146 
3147 static ssize_t
3148 il3945_store_flags(struct device *d, struct device_attribute *attr,
3149 		   const char *buf, size_t count)
3150 {
3151 	struct il_priv *il = dev_get_drvdata(d);
3152 	u32 flags = simple_strtoul(buf, NULL, 0);
3153 
3154 	mutex_lock(&il->mutex);
3155 	if (le32_to_cpu(il->staging.flags) != flags) {
3156 		/* Cancel any currently running scans... */
3157 		if (il_scan_cancel_timeout(il, 100))
3158 			IL_WARN("Could not cancel scan.\n");
3159 		else {
3160 			D_INFO("Committing rxon.flags = 0x%04X\n", flags);
3161 			il->staging.flags = cpu_to_le32(flags);
3162 			il3945_commit_rxon(il);
3163 		}
3164 	}
3165 	mutex_unlock(&il->mutex);
3166 
3167 	return count;
3168 }
3169 
3170 static DEVICE_ATTR(flags, 0644, il3945_show_flags, il3945_store_flags);
3171 
3172 static ssize_t
3173 il3945_show_filter_flags(struct device *d, struct device_attribute *attr,
3174 			 char *buf)
3175 {
3176 	struct il_priv *il = dev_get_drvdata(d);
3177 
3178 	return sprintf(buf, "0x%04X\n", le32_to_cpu(il->active.filter_flags));
3179 }
3180 
3181 static ssize_t
3182 il3945_store_filter_flags(struct device *d, struct device_attribute *attr,
3183 			  const char *buf, size_t count)
3184 {
3185 	struct il_priv *il = dev_get_drvdata(d);
3186 	u32 filter_flags = simple_strtoul(buf, NULL, 0);
3187 
3188 	mutex_lock(&il->mutex);
3189 	if (le32_to_cpu(il->staging.filter_flags) != filter_flags) {
3190 		/* Cancel any currently running scans... */
3191 		if (il_scan_cancel_timeout(il, 100))
3192 			IL_WARN("Could not cancel scan.\n");
3193 		else {
3194 			D_INFO("Committing rxon.filter_flags = " "0x%04X\n",
3195 			       filter_flags);
3196 			il->staging.filter_flags = cpu_to_le32(filter_flags);
3197 			il3945_commit_rxon(il);
3198 		}
3199 	}
3200 	mutex_unlock(&il->mutex);
3201 
3202 	return count;
3203 }
3204 
3205 static DEVICE_ATTR(filter_flags, 0644, il3945_show_filter_flags,
3206 		   il3945_store_filter_flags);
3207 
3208 static ssize_t
3209 il3945_show_measurement(struct device *d, struct device_attribute *attr,
3210 			char *buf)
3211 {
3212 	struct il_priv *il = dev_get_drvdata(d);
3213 	struct il_spectrum_notification measure_report;
3214 	u32 size = sizeof(measure_report), len = 0, ofs = 0;
3215 	u8 *data = (u8 *) &measure_report;
3216 	unsigned long flags;
3217 
3218 	spin_lock_irqsave(&il->lock, flags);
3219 	if (!(il->measurement_status & MEASUREMENT_READY)) {
3220 		spin_unlock_irqrestore(&il->lock, flags);
3221 		return 0;
3222 	}
3223 	memcpy(&measure_report, &il->measure_report, size);
3224 	il->measurement_status = 0;
3225 	spin_unlock_irqrestore(&il->lock, flags);
3226 
3227 	while (size && PAGE_SIZE - len) {
3228 		hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
3229 				   PAGE_SIZE - len, true);
3230 		len = strlen(buf);
3231 		if (PAGE_SIZE - len)
3232 			buf[len++] = '\n';
3233 
3234 		ofs += 16;
3235 		size -= min(size, 16U);
3236 	}
3237 
3238 	return len;
3239 }
3240 
3241 static ssize_t
3242 il3945_store_measurement(struct device *d, struct device_attribute *attr,
3243 			 const char *buf, size_t count)
3244 {
3245 	struct il_priv *il = dev_get_drvdata(d);
3246 	struct ieee80211_measurement_params params = {
3247 		.channel = le16_to_cpu(il->active.channel),
3248 		.start_time = cpu_to_le64(il->_3945.last_tsf),
3249 		.duration = cpu_to_le16(1),
3250 	};
3251 	u8 type = IL_MEASURE_BASIC;
3252 	u8 buffer[32];
3253 	u8 channel;
3254 
3255 	if (count) {
3256 		char *p = buffer;
3257 		strscpy(buffer, buf, sizeof(buffer));
3258 		channel = simple_strtoul(p, NULL, 0);
3259 		if (channel)
3260 			params.channel = channel;
3261 
3262 		p = buffer;
3263 		while (*p && *p != ' ')
3264 			p++;
3265 		if (*p)
3266 			type = simple_strtoul(p + 1, NULL, 0);
3267 	}
3268 
3269 	D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n",
3270 	       type, params.channel, buf);
3271 	il3945_get_measurement(il, &params, type);
3272 
3273 	return count;
3274 }
3275 
3276 static DEVICE_ATTR(measurement, 0600, il3945_show_measurement,
3277 		   il3945_store_measurement);
3278 
3279 static ssize_t
3280 il3945_store_retry_rate(struct device *d, struct device_attribute *attr,
3281 			const char *buf, size_t count)
3282 {
3283 	struct il_priv *il = dev_get_drvdata(d);
3284 
3285 	il->retry_rate = simple_strtoul(buf, NULL, 0);
3286 	if (il->retry_rate <= 0)
3287 		il->retry_rate = 1;
3288 
3289 	return count;
3290 }
3291 
3292 static ssize_t
3293 il3945_show_retry_rate(struct device *d, struct device_attribute *attr,
3294 		       char *buf)
3295 {
3296 	struct il_priv *il = dev_get_drvdata(d);
3297 	return sprintf(buf, "%d", il->retry_rate);
3298 }
3299 
3300 static DEVICE_ATTR(retry_rate, 0600, il3945_show_retry_rate,
3301 		   il3945_store_retry_rate);
3302 
3303 static ssize_t
3304 il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf)
3305 {
3306 	/* all this shit doesn't belong into sysfs anyway */
3307 	return 0;
3308 }
3309 
3310 static DEVICE_ATTR(channels, 0400, il3945_show_channels, NULL);
3311 
3312 static ssize_t
3313 il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf)
3314 {
3315 	struct il_priv *il = dev_get_drvdata(d);
3316 
3317 	if (!il_is_alive(il))
3318 		return -EAGAIN;
3319 
3320 	return sprintf(buf, "%d\n", il3945_mod_params.antenna);
3321 }
3322 
3323 static ssize_t
3324 il3945_store_antenna(struct device *d, struct device_attribute *attr,
3325 		     const char *buf, size_t count)
3326 {
3327 	struct il_priv *il __maybe_unused = dev_get_drvdata(d);
3328 	int ant;
3329 
3330 	if (count == 0)
3331 		return 0;
3332 
3333 	if (sscanf(buf, "%1i", &ant) != 1) {
3334 		D_INFO("not in hex or decimal form.\n");
3335 		return count;
3336 	}
3337 
3338 	if (ant >= 0 && ant <= 2) {
3339 		D_INFO("Setting antenna select to %d.\n", ant);
3340 		il3945_mod_params.antenna = (enum il3945_antenna)ant;
3341 	} else
3342 		D_INFO("Bad antenna select value %d.\n", ant);
3343 
3344 	return count;
3345 }
3346 
3347 static DEVICE_ATTR(antenna, 0644, il3945_show_antenna, il3945_store_antenna);
3348 
3349 static ssize_t
3350 il3945_show_status(struct device *d, struct device_attribute *attr, char *buf)
3351 {
3352 	struct il_priv *il = dev_get_drvdata(d);
3353 	if (!il_is_alive(il))
3354 		return -EAGAIN;
3355 	return sprintf(buf, "0x%08x\n", (int)il->status);
3356 }
3357 
3358 static DEVICE_ATTR(status, 0444, il3945_show_status, NULL);
3359 
3360 static ssize_t
3361 il3945_dump_error_log(struct device *d, struct device_attribute *attr,
3362 		      const char *buf, size_t count)
3363 {
3364 	struct il_priv *il = dev_get_drvdata(d);
3365 	char *p = (char *)buf;
3366 
3367 	if (p[0] == '1')
3368 		il3945_dump_nic_error_log(il);
3369 
3370 	return strnlen(buf, count);
3371 }
3372 
3373 static DEVICE_ATTR(dump_errors, 0200, NULL, il3945_dump_error_log);
3374 
3375 /*****************************************************************************
3376  *
3377  * driver setup and tear down
3378  *
3379  *****************************************************************************/
3380 
3381 static void
3382 il3945_setup_deferred_work(struct il_priv *il)
3383 {
3384 	il->workqueue = create_singlethread_workqueue(DRV_NAME);
3385 
3386 	init_waitqueue_head(&il->wait_command_queue);
3387 
3388 	INIT_WORK(&il->restart, il3945_bg_restart);
3389 	INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
3390 	INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
3391 	INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
3392 	INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);
3393 
3394 	il_setup_scan_deferred_work(il);
3395 
3396 	il3945_hw_setup_deferred_work(il);
3397 
3398 	timer_setup(&il->watchdog, il_bg_watchdog, 0);
3399 
3400 	tasklet_setup(&il->irq_tasklet, il3945_irq_tasklet);
3401 }
3402 
3403 static void
3404 il3945_cancel_deferred_work(struct il_priv *il)
3405 {
3406 	il3945_hw_cancel_deferred_work(il);
3407 
3408 	cancel_delayed_work_sync(&il->init_alive_start);
3409 	cancel_delayed_work(&il->alive_start);
3410 
3411 	il_cancel_scan_deferred_work(il);
3412 }
3413 
3414 static struct attribute *il3945_sysfs_entries[] = {
3415 	&dev_attr_antenna.attr,
3416 	&dev_attr_channels.attr,
3417 	&dev_attr_dump_errors.attr,
3418 	&dev_attr_flags.attr,
3419 	&dev_attr_filter_flags.attr,
3420 	&dev_attr_measurement.attr,
3421 	&dev_attr_retry_rate.attr,
3422 	&dev_attr_status.attr,
3423 	&dev_attr_temperature.attr,
3424 	&dev_attr_tx_power.attr,
3425 #ifdef CONFIG_IWLEGACY_DEBUG
3426 	&dev_attr_debug_level.attr,
3427 #endif
3428 	NULL
3429 };
3430 
3431 static const struct attribute_group il3945_attribute_group = {
3432 	.name = NULL,		/* put in device directory */
3433 	.attrs = il3945_sysfs_entries,
3434 };
3435 
3436 static struct ieee80211_ops il3945_mac_ops __ro_after_init = {
3437 	.tx = il3945_mac_tx,
3438 	.start = il3945_mac_start,
3439 	.stop = il3945_mac_stop,
3440 	.add_interface = il_mac_add_interface,
3441 	.remove_interface = il_mac_remove_interface,
3442 	.change_interface = il_mac_change_interface,
3443 	.config = il_mac_config,
3444 	.configure_filter = il3945_configure_filter,
3445 	.set_key = il3945_mac_set_key,
3446 	.conf_tx = il_mac_conf_tx,
3447 	.reset_tsf = il_mac_reset_tsf,
3448 	.bss_info_changed = il_mac_bss_info_changed,
3449 	.hw_scan = il_mac_hw_scan,
3450 	.sta_add = il3945_mac_sta_add,
3451 	.sta_remove = il_mac_sta_remove,
3452 	.tx_last_beacon = il_mac_tx_last_beacon,
3453 	.flush = il_mac_flush,
3454 };
3455 
3456 static int
3457 il3945_init_drv(struct il_priv *il)
3458 {
3459 	int ret;
3460 	struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
3461 
3462 	il->retry_rate = 1;
3463 	il->beacon_skb = NULL;
3464 
3465 	spin_lock_init(&il->sta_lock);
3466 	spin_lock_init(&il->hcmd_lock);
3467 
3468 	INIT_LIST_HEAD(&il->free_frames);
3469 
3470 	mutex_init(&il->mutex);
3471 
3472 	il->ieee_channels = NULL;
3473 	il->ieee_rates = NULL;
3474 	il->band = NL80211_BAND_2GHZ;
3475 
3476 	il->iw_mode = NL80211_IFTYPE_STATION;
3477 	il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
3478 
3479 	/* initialize force reset */
3480 	il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
3481 
3482 	if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
3483 		IL_WARN("Unsupported EEPROM version: 0x%04X\n",
3484 			eeprom->version);
3485 		ret = -EINVAL;
3486 		goto err;
3487 	}
3488 	ret = il_init_channel_map(il);
3489 	if (ret) {
3490 		IL_ERR("initializing regulatory failed: %d\n", ret);
3491 		goto err;
3492 	}
3493 
3494 	/* Set up txpower settings in driver for all channels */
3495 	if (il3945_txpower_set_from_eeprom(il)) {
3496 		ret = -EIO;
3497 		goto err_free_channel_map;
3498 	}
3499 
3500 	ret = il_init_geos(il);
3501 	if (ret) {
3502 		IL_ERR("initializing geos failed: %d\n", ret);
3503 		goto err_free_channel_map;
3504 	}
3505 	il3945_init_hw_rates(il, il->ieee_rates);
3506 
3507 	return 0;
3508 
3509 err_free_channel_map:
3510 	il_free_channel_map(il);
3511 err:
3512 	return ret;
3513 }
3514 
3515 #define IL3945_MAX_PROBE_REQUEST	200
3516 
3517 static int
3518 il3945_setup_mac(struct il_priv *il)
3519 {
3520 	int ret;
3521 	struct ieee80211_hw *hw = il->hw;
3522 
3523 	hw->rate_control_algorithm = "iwl-3945-rs";
3524 	hw->sta_data_size = sizeof(struct il3945_sta_priv);
3525 	hw->vif_data_size = sizeof(struct il_vif_priv);
3526 
3527 	/* Tell mac80211 our characteristics */
3528 	ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
3529 	ieee80211_hw_set(hw, SUPPORTS_PS);
3530 	ieee80211_hw_set(hw, SIGNAL_DBM);
3531 	ieee80211_hw_set(hw, SPECTRUM_MGMT);
3532 
3533 	hw->wiphy->interface_modes =
3534 	    BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
3535 
3536 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
3537 	hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
3538 				       REGULATORY_DISABLE_BEACON_HINTS;
3539 
3540 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
3541 
3542 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
3543 	/* we create the 802.11 header and a zero-length SSID element */
3544 	hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;
3545 
3546 	/* Default value; 4 EDCA QOS priorities */
3547 	hw->queues = 4;
3548 
3549 	if (il->bands[NL80211_BAND_2GHZ].n_channels)
3550 		il->hw->wiphy->bands[NL80211_BAND_2GHZ] =
3551 		    &il->bands[NL80211_BAND_2GHZ];
3552 
3553 	if (il->bands[NL80211_BAND_5GHZ].n_channels)
3554 		il->hw->wiphy->bands[NL80211_BAND_5GHZ] =
3555 		    &il->bands[NL80211_BAND_5GHZ];
3556 
3557 	il_leds_init(il);
3558 
3559 	wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
3560 
3561 	ret = ieee80211_register_hw(il->hw);
3562 	if (ret) {
3563 		IL_ERR("Failed to register hw (error %d)\n", ret);
3564 		return ret;
3565 	}
3566 	il->mac80211_registered = 1;
3567 
3568 	return 0;
3569 }
3570 
3571 static int
3572 il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3573 {
3574 	int err = 0;
3575 	struct il_priv *il;
3576 	struct ieee80211_hw *hw;
3577 	struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
3578 	struct il3945_eeprom *eeprom;
3579 	unsigned long flags;
3580 
3581 	/***********************
3582 	 * 1. Allocating HW data
3583 	 * ********************/
3584 
3585 	hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il3945_mac_ops);
3586 	if (!hw) {
3587 		err = -ENOMEM;
3588 		goto out;
3589 	}
3590 	il = hw->priv;
3591 	il->hw = hw;
3592 	SET_IEEE80211_DEV(hw, &pdev->dev);
3593 
3594 	il->cmd_queue = IL39_CMD_QUEUE_NUM;
3595 
3596 	D_INFO("*** LOAD DRIVER ***\n");
3597 	il->cfg = cfg;
3598 	il->ops = &il3945_ops;
3599 #ifdef CONFIG_IWLEGACY_DEBUGFS
3600 	il->debugfs_ops = &il3945_debugfs_ops;
3601 #endif
3602 	il->pci_dev = pdev;
3603 	il->inta_mask = CSR_INI_SET_MASK;
3604 
3605 	/***************************
3606 	 * 2. Initializing PCI bus
3607 	 * *************************/
3608 	pci_disable_link_state(pdev,
3609 			       PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
3610 			       PCIE_LINK_STATE_CLKPM);
3611 
3612 	if (pci_enable_device(pdev)) {
3613 		err = -ENODEV;
3614 		goto out_ieee80211_free_hw;
3615 	}
3616 
3617 	pci_set_master(pdev);
3618 
3619 	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
3620 	if (err) {
3621 		IL_WARN("No suitable DMA available.\n");
3622 		goto out_pci_disable_device;
3623 	}
3624 
3625 	pci_set_drvdata(pdev, il);
3626 	err = pci_request_regions(pdev, DRV_NAME);
3627 	if (err)
3628 		goto out_pci_disable_device;
3629 
3630 	/***********************
3631 	 * 3. Read REV Register
3632 	 * ********************/
3633 	il->hw_base = pci_ioremap_bar(pdev, 0);
3634 	if (!il->hw_base) {
3635 		err = -ENODEV;
3636 		goto out_pci_release_regions;
3637 	}
3638 
3639 	D_INFO("pci_resource_len = 0x%08llx\n",
3640 	       (unsigned long long)pci_resource_len(pdev, 0));
3641 	D_INFO("pci_resource_base = %p\n", il->hw_base);
3642 
3643 	/* We disable the RETRY_TIMEOUT register (0x41) to keep
3644 	 * PCI Tx retries from interfering with C3 CPU state */
3645 	pci_write_config_byte(pdev, 0x41, 0x00);
3646 
3647 	/* these spin locks will be used in apm_init and EEPROM access
3648 	 * we should init now
3649 	 */
3650 	spin_lock_init(&il->reg_lock);
3651 	spin_lock_init(&il->lock);
3652 
3653 	/*
3654 	 * stop and reset the on-board processor just in case it is in a
3655 	 * strange state ... like being left stranded by a primary kernel
3656 	 * and this is now the kdump kernel trying to start up
3657 	 */
3658 	_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3659 
3660 	/***********************
3661 	 * 4. Read EEPROM
3662 	 * ********************/
3663 
3664 	/* Read the EEPROM */
3665 	err = il_eeprom_init(il);
3666 	if (err) {
3667 		IL_ERR("Unable to init EEPROM\n");
3668 		goto out_iounmap;
3669 	}
3670 	/* MAC Address location in EEPROM same for 3945/4965 */
3671 	eeprom = (struct il3945_eeprom *)il->eeprom;
3672 	D_INFO("MAC address: %pM\n", eeprom->mac_address);
3673 	SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);
3674 
3675 	/***********************
3676 	 * 5. Setup HW Constants
3677 	 * ********************/
3678 	/* Device-specific setup */
3679 	err = il3945_hw_set_hw_params(il);
3680 	if (err) {
3681 		IL_ERR("failed to set hw settings\n");
3682 		goto out_eeprom_free;
3683 	}
3684 
3685 	/***********************
3686 	 * 6. Setup il
3687 	 * ********************/
3688 
3689 	err = il3945_init_drv(il);
3690 	if (err) {
3691 		IL_ERR("initializing driver failed\n");
3692 		goto out_unset_hw_params;
3693 	}
3694 
3695 	IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name);
3696 
3697 	/***********************
3698 	 * 7. Setup Services
3699 	 * ********************/
3700 
3701 	spin_lock_irqsave(&il->lock, flags);
3702 	il_disable_interrupts(il);
3703 	spin_unlock_irqrestore(&il->lock, flags);
3704 
3705 	pci_enable_msi(il->pci_dev);
3706 
3707 	err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
3708 	if (err) {
3709 		IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
3710 		goto out_disable_msi;
3711 	}
3712 
3713 	err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
3714 	if (err) {
3715 		IL_ERR("failed to create sysfs device attributes\n");
3716 		goto out_release_irq;
3717 	}
3718 
3719 	il_set_rxon_channel(il, &il->bands[NL80211_BAND_2GHZ].channels[5]);
3720 	il3945_setup_deferred_work(il);
3721 	il3945_setup_handlers(il);
3722 	il_power_initialize(il);
3723 
3724 	/*********************************
3725 	 * 8. Setup and Register mac80211
3726 	 * *******************************/
3727 
3728 	il_enable_interrupts(il);
3729 
3730 	err = il3945_setup_mac(il);
3731 	if (err)
3732 		goto out_remove_sysfs;
3733 
3734 	il_dbgfs_register(il, DRV_NAME);
3735 
3736 	/* Start monitoring the killswitch */
3737 	queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ);
3738 
3739 	return 0;
3740 
3741 out_remove_sysfs:
3742 	destroy_workqueue(il->workqueue);
3743 	il->workqueue = NULL;
3744 	sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3745 out_release_irq:
3746 	free_irq(il->pci_dev->irq, il);
3747 out_disable_msi:
3748 	pci_disable_msi(il->pci_dev);
3749 	il_free_geos(il);
3750 	il_free_channel_map(il);
3751 out_unset_hw_params:
3752 	il3945_unset_hw_params(il);
3753 out_eeprom_free:
3754 	il_eeprom_free(il);
3755 out_iounmap:
3756 	iounmap(il->hw_base);
3757 out_pci_release_regions:
3758 	pci_release_regions(pdev);
3759 out_pci_disable_device:
3760 	pci_disable_device(pdev);
3761 out_ieee80211_free_hw:
3762 	ieee80211_free_hw(il->hw);
3763 out:
3764 	return err;
3765 }
3766 
3767 static void
3768 il3945_pci_remove(struct pci_dev *pdev)
3769 {
3770 	struct il_priv *il = pci_get_drvdata(pdev);
3771 	unsigned long flags;
3772 
3773 	if (!il)
3774 		return;
3775 
3776 	D_INFO("*** UNLOAD DRIVER ***\n");
3777 
3778 	il_dbgfs_unregister(il);
3779 
3780 	set_bit(S_EXIT_PENDING, &il->status);
3781 
3782 	il_leds_exit(il);
3783 
3784 	if (il->mac80211_registered) {
3785 		ieee80211_unregister_hw(il->hw);
3786 		il->mac80211_registered = 0;
3787 	} else {
3788 		il3945_down(il);
3789 	}
3790 
3791 	/*
3792 	 * Make sure device is reset to low power before unloading driver.
3793 	 * This may be redundant with il_down(), but there are paths to
3794 	 * run il_down() without calling apm_ops.stop(), and there are
3795 	 * paths to avoid running il_down() at all before leaving driver.
3796 	 * This (inexpensive) call *makes sure* device is reset.
3797 	 */
3798 	il_apm_stop(il);
3799 
3800 	/* make sure we flush any pending irq or
3801 	 * tasklet for the driver
3802 	 */
3803 	spin_lock_irqsave(&il->lock, flags);
3804 	il_disable_interrupts(il);
3805 	spin_unlock_irqrestore(&il->lock, flags);
3806 
3807 	il3945_synchronize_irq(il);
3808 
3809 	sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3810 
3811 	cancel_delayed_work_sync(&il->_3945.rfkill_poll);
3812 
3813 	il3945_dealloc_ucode_pci(il);
3814 
3815 	if (il->rxq.bd)
3816 		il3945_rx_queue_free(il, &il->rxq);
3817 	il3945_hw_txq_ctx_free(il);
3818 
3819 	il3945_unset_hw_params(il);
3820 
3821 	/*netif_stop_queue(dev); */
3822 
3823 	/* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
3824 	 * il->workqueue... so we can't take down the workqueue
3825 	 * until now... */
3826 	destroy_workqueue(il->workqueue);
3827 	il->workqueue = NULL;
3828 
3829 	free_irq(pdev->irq, il);
3830 	pci_disable_msi(pdev);
3831 
3832 	iounmap(il->hw_base);
3833 	pci_release_regions(pdev);
3834 	pci_disable_device(pdev);
3835 
3836 	il_free_channel_map(il);
3837 	il_free_geos(il);
3838 	kfree(il->scan_cmd);
3839 	dev_kfree_skb(il->beacon_skb);
3840 	ieee80211_free_hw(il->hw);
3841 }
3842 
3843 /*****************************************************************************
3844  *
3845  * driver and module entry point
3846  *
3847  *****************************************************************************/
3848 
3849 static struct pci_driver il3945_driver = {
3850 	.name = DRV_NAME,
3851 	.id_table = il3945_hw_card_ids,
3852 	.probe = il3945_pci_probe,
3853 	.remove = il3945_pci_remove,
3854 	.driver.pm = IL_LEGACY_PM_OPS,
3855 };
3856 
3857 static int __init
3858 il3945_init(void)
3859 {
3860 
3861 	int ret;
3862 	pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
3863 	pr_info(DRV_COPYRIGHT "\n");
3864 
3865 	/*
3866 	 * Disabling hardware scan means that mac80211 will perform scans
3867 	 * "the hard way", rather than using device's scan.
3868 	 */
3869 	if (il3945_mod_params.disable_hw_scan) {
3870 		pr_info("hw_scan is disabled\n");
3871 		il3945_mac_ops.hw_scan = NULL;
3872 	}
3873 
3874 	ret = il3945_rate_control_register();
3875 	if (ret) {
3876 		pr_err("Unable to register rate control algorithm: %d\n", ret);
3877 		return ret;
3878 	}
3879 
3880 	ret = pci_register_driver(&il3945_driver);
3881 	if (ret) {
3882 		pr_err("Unable to initialize PCI module\n");
3883 		goto error_register;
3884 	}
3885 
3886 	return ret;
3887 
3888 error_register:
3889 	il3945_rate_control_unregister();
3890 	return ret;
3891 }
3892 
3893 static void __exit
3894 il3945_exit(void)
3895 {
3896 	pci_unregister_driver(&il3945_driver);
3897 	il3945_rate_control_unregister();
3898 }
3899 
3900 MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));
3901 
3902 module_param_named(antenna, il3945_mod_params.antenna, int, 0444);
3903 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
3904 module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, 0444);
3905 MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])");
3906 module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int,
3907 		   0444);
3908 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
3909 #ifdef CONFIG_IWLEGACY_DEBUG
3910 module_param_named(debug, il_debug_level, uint, 0644);
3911 MODULE_PARM_DESC(debug, "debug output mask");
3912 #endif
3913 module_param_named(fw_restart, il3945_mod_params.restart_fw, int, 0444);
3914 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3915 
3916 module_exit(il3945_exit);
3917 module_init(il3945_init);
3918