1 // SPDX-License-Identifier: GPL-2.0-only 2 /****************************************************************************** 3 * 4 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. 5 * 6 * Portions of this file are derived from the ipw3945 project, as well 7 * as portions of the ieee80211 subsystem header files. 8 * 9 * Contact Information: 10 * Intel Linux Wireless <ilw@linux.intel.com> 11 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 12 * 13 *****************************************************************************/ 14 15 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 16 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/init.h> 20 #include <linux/pci.h> 21 #include <linux/slab.h> 22 #include <linux/dma-mapping.h> 23 #include <linux/delay.h> 24 #include <linux/sched.h> 25 #include <linux/skbuff.h> 26 #include <linux/netdevice.h> 27 #include <linux/firmware.h> 28 #include <linux/etherdevice.h> 29 #include <linux/if_arp.h> 30 31 #include <net/ieee80211_radiotap.h> 32 #include <net/mac80211.h> 33 34 #include <asm/div64.h> 35 36 #define DRV_NAME "iwl3945" 37 38 #include "commands.h" 39 #include "common.h" 40 #include "3945.h" 41 #include "iwl-spectrum.h" 42 43 /* 44 * module name, copyright, version, etc. 45 */ 46 47 #define DRV_DESCRIPTION \ 48 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux" 49 50 #ifdef CONFIG_IWLEGACY_DEBUG 51 #define VD "d" 52 #else 53 #define VD 54 #endif 55 56 /* 57 * add "s" to indicate spectrum measurement included. 58 * we add it here to be consistent with previous releases in which 59 * this was configurable. 60 */ 61 #define DRV_VERSION IWLWIFI_VERSION VD "s" 62 #define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation" 63 #define DRV_AUTHOR "<ilw@linux.intel.com>" 64 65 MODULE_DESCRIPTION(DRV_DESCRIPTION); 66 MODULE_VERSION(DRV_VERSION); 67 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); 68 MODULE_LICENSE("GPL"); 69 70 /* module parameters */ 71 struct il_mod_params il3945_mod_params = { 72 .sw_crypto = 1, 73 .restart_fw = 1, 74 .disable_hw_scan = 1, 75 /* the rest are 0 by default */ 76 }; 77 78 /** 79 * il3945_get_antenna_flags - Get antenna flags for RXON command 80 * @il: eeprom and antenna fields are used to determine antenna flags 81 * 82 * il->eeprom39 is used to determine if antenna AUX/MAIN are reversed 83 * il3945_mod_params.antenna specifies the antenna diversity mode: 84 * 85 * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself 86 * IL_ANTENNA_MAIN - Force MAIN antenna 87 * IL_ANTENNA_AUX - Force AUX antenna 88 */ 89 __le32 90 il3945_get_antenna_flags(const struct il_priv *il) 91 { 92 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 93 94 switch (il3945_mod_params.antenna) { 95 case IL_ANTENNA_DIVERSITY: 96 return 0; 97 98 case IL_ANTENNA_MAIN: 99 if (eeprom->antenna_switch_type) 100 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; 101 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; 102 103 case IL_ANTENNA_AUX: 104 if (eeprom->antenna_switch_type) 105 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; 106 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; 107 } 108 109 /* bad antenna selector value */ 110 IL_ERR("Bad antenna selector value (0x%x)\n", 111 il3945_mod_params.antenna); 112 113 return 0; /* "diversity" is default if error */ 114 } 115 116 static int 117 il3945_set_ccmp_dynamic_key_info(struct il_priv *il, 118 struct ieee80211_key_conf *keyconf, u8 sta_id) 119 { 120 unsigned long flags; 121 __le16 key_flags = 0; 122 int ret; 123 124 key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); 125 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); 126 127 if (sta_id == il->hw_params.bcast_id) 128 key_flags |= STA_KEY_MULTICAST_MSK; 129 130 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 131 keyconf->hw_key_idx = keyconf->keyidx; 132 key_flags &= ~STA_KEY_FLG_INVALID; 133 134 spin_lock_irqsave(&il->sta_lock, flags); 135 il->stations[sta_id].keyinfo.cipher = keyconf->cipher; 136 il->stations[sta_id].keyinfo.keylen = keyconf->keylen; 137 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); 138 139 memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); 140 141 if ((il->stations[sta_id].sta.key. 142 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) 143 il->stations[sta_id].sta.key.key_offset = 144 il_get_free_ucode_key_idx(il); 145 /* else, we are overriding an existing key => no need to allocated room 146 * in uCode. */ 147 148 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, 149 "no space for a new key"); 150 151 il->stations[sta_id].sta.key.key_flags = key_flags; 152 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 153 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 154 155 D_INFO("hwcrypto: modify ucode station key info\n"); 156 157 ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); 158 159 spin_unlock_irqrestore(&il->sta_lock, flags); 160 161 return ret; 162 } 163 164 static int 165 il3945_set_tkip_dynamic_key_info(struct il_priv *il, 166 struct ieee80211_key_conf *keyconf, u8 sta_id) 167 { 168 return -EOPNOTSUPP; 169 } 170 171 static int 172 il3945_set_wep_dynamic_key_info(struct il_priv *il, 173 struct ieee80211_key_conf *keyconf, u8 sta_id) 174 { 175 return -EOPNOTSUPP; 176 } 177 178 static int 179 il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id) 180 { 181 unsigned long flags; 182 struct il_addsta_cmd sta_cmd; 183 184 spin_lock_irqsave(&il->sta_lock, flags); 185 memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key)); 186 memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo)); 187 il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; 188 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; 189 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; 190 memcpy(&sta_cmd, &il->stations[sta_id].sta, 191 sizeof(struct il_addsta_cmd)); 192 spin_unlock_irqrestore(&il->sta_lock, flags); 193 194 D_INFO("hwcrypto: clear ucode station key info\n"); 195 return il_send_add_sta(il, &sta_cmd, CMD_SYNC); 196 } 197 198 static int 199 il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, 200 u8 sta_id) 201 { 202 int ret = 0; 203 204 keyconf->hw_key_idx = HW_KEY_DYNAMIC; 205 206 switch (keyconf->cipher) { 207 case WLAN_CIPHER_SUITE_CCMP: 208 ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id); 209 break; 210 case WLAN_CIPHER_SUITE_TKIP: 211 ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id); 212 break; 213 case WLAN_CIPHER_SUITE_WEP40: 214 case WLAN_CIPHER_SUITE_WEP104: 215 ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id); 216 break; 217 default: 218 IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher); 219 ret = -EINVAL; 220 } 221 222 D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n", 223 keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret); 224 225 return ret; 226 } 227 228 static int 229 il3945_remove_static_key(struct il_priv *il) 230 { 231 return -EOPNOTSUPP; 232 } 233 234 static int 235 il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key) 236 { 237 if (key->cipher == WLAN_CIPHER_SUITE_WEP40 || 238 key->cipher == WLAN_CIPHER_SUITE_WEP104) 239 return -EOPNOTSUPP; 240 241 IL_ERR("Static key invalid: cipher %x\n", key->cipher); 242 return -EINVAL; 243 } 244 245 static void 246 il3945_clear_free_frames(struct il_priv *il) 247 { 248 struct list_head *element; 249 250 D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count); 251 252 while (!list_empty(&il->free_frames)) { 253 element = il->free_frames.next; 254 list_del(element); 255 kfree(list_entry(element, struct il3945_frame, list)); 256 il->frames_count--; 257 } 258 259 if (il->frames_count) { 260 IL_WARN("%d frames still in use. Did we lose one?\n", 261 il->frames_count); 262 il->frames_count = 0; 263 } 264 } 265 266 static struct il3945_frame * 267 il3945_get_free_frame(struct il_priv *il) 268 { 269 struct il3945_frame *frame; 270 struct list_head *element; 271 if (list_empty(&il->free_frames)) { 272 frame = kzalloc(sizeof(*frame), GFP_KERNEL); 273 if (!frame) { 274 IL_ERR("Could not allocate frame!\n"); 275 return NULL; 276 } 277 278 il->frames_count++; 279 return frame; 280 } 281 282 element = il->free_frames.next; 283 list_del(element); 284 return list_entry(element, struct il3945_frame, list); 285 } 286 287 static void 288 il3945_free_frame(struct il_priv *il, struct il3945_frame *frame) 289 { 290 memset(frame, 0, sizeof(*frame)); 291 list_add(&frame->list, &il->free_frames); 292 } 293 294 unsigned int 295 il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr, 296 int left) 297 { 298 299 if (!il_is_associated(il) || !il->beacon_skb) 300 return 0; 301 302 if (il->beacon_skb->len > left) 303 return 0; 304 305 memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len); 306 307 return il->beacon_skb->len; 308 } 309 310 static int 311 il3945_send_beacon_cmd(struct il_priv *il) 312 { 313 struct il3945_frame *frame; 314 unsigned int frame_size; 315 int rc; 316 u8 rate; 317 318 frame = il3945_get_free_frame(il); 319 320 if (!frame) { 321 IL_ERR("Could not obtain free frame buffer for beacon " 322 "command.\n"); 323 return -ENOMEM; 324 } 325 326 rate = il_get_lowest_plcp(il); 327 328 frame_size = il3945_hw_get_beacon_cmd(il, frame, rate); 329 330 rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]); 331 332 il3945_free_frame(il, frame); 333 334 return rc; 335 } 336 337 static void 338 il3945_unset_hw_params(struct il_priv *il) 339 { 340 if (il->_3945.shared_virt) 341 dma_free_coherent(&il->pci_dev->dev, 342 sizeof(struct il3945_shared), 343 il->_3945.shared_virt, il->_3945.shared_phys); 344 } 345 346 static void 347 il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info, 348 struct il_device_cmd *cmd, 349 struct sk_buff *skb_frag, int sta_id) 350 { 351 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload; 352 struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo; 353 354 tx_cmd->sec_ctl = 0; 355 356 switch (keyinfo->cipher) { 357 case WLAN_CIPHER_SUITE_CCMP: 358 tx_cmd->sec_ctl = TX_CMD_SEC_CCM; 359 memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen); 360 D_TX("tx_cmd with AES hwcrypto\n"); 361 break; 362 363 case WLAN_CIPHER_SUITE_TKIP: 364 break; 365 366 case WLAN_CIPHER_SUITE_WEP104: 367 tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; 368 /* fall through */ 369 case WLAN_CIPHER_SUITE_WEP40: 370 tx_cmd->sec_ctl |= 371 TX_CMD_SEC_WEP | (info->control.hw_key-> 372 hw_key_idx & TX_CMD_SEC_MSK) << 373 TX_CMD_SEC_SHIFT; 374 375 memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen); 376 377 D_TX("Configuring packet for WEP encryption " "with key %d\n", 378 info->control.hw_key->hw_key_idx); 379 break; 380 381 default: 382 IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher); 383 break; 384 } 385 } 386 387 /* 388 * handle build C_TX command notification. 389 */ 390 static void 391 il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd, 392 struct ieee80211_tx_info *info, 393 struct ieee80211_hdr *hdr, u8 std_id) 394 { 395 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload; 396 __le32 tx_flags = tx_cmd->tx_flags; 397 __le16 fc = hdr->frame_control; 398 399 tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 400 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { 401 tx_flags |= TX_CMD_FLG_ACK_MSK; 402 if (ieee80211_is_mgmt(fc)) 403 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 404 if (ieee80211_is_probe_resp(fc) && 405 !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) 406 tx_flags |= TX_CMD_FLG_TSF_MSK; 407 } else { 408 tx_flags &= (~TX_CMD_FLG_ACK_MSK); 409 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 410 } 411 412 tx_cmd->sta_id = std_id; 413 if (ieee80211_has_morefrags(fc)) 414 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; 415 416 if (ieee80211_is_data_qos(fc)) { 417 u8 *qc = ieee80211_get_qos_ctl(hdr); 418 tx_cmd->tid_tspec = qc[0] & 0xf; 419 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; 420 } else { 421 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; 422 } 423 424 il_tx_cmd_protection(il, info, fc, &tx_flags); 425 426 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); 427 if (ieee80211_is_mgmt(fc)) { 428 if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) 429 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); 430 else 431 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); 432 } else { 433 tx_cmd->timeout.pm_frame_timeout = 0; 434 } 435 436 tx_cmd->driver_txop = 0; 437 tx_cmd->tx_flags = tx_flags; 438 tx_cmd->next_frame_len = 0; 439 } 440 441 /* 442 * start C_TX command process 443 */ 444 static int 445 il3945_tx_skb(struct il_priv *il, 446 struct ieee80211_sta *sta, 447 struct sk_buff *skb) 448 { 449 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; 450 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); 451 struct il3945_tx_cmd *tx_cmd; 452 struct il_tx_queue *txq = NULL; 453 struct il_queue *q = NULL; 454 struct il_device_cmd *out_cmd; 455 struct il_cmd_meta *out_meta; 456 dma_addr_t phys_addr; 457 dma_addr_t txcmd_phys; 458 int txq_id = skb_get_queue_mapping(skb); 459 u16 len, idx, hdr_len; 460 u16 firstlen, secondlen; 461 u8 sta_id; 462 u8 tid = 0; 463 __le16 fc; 464 u8 wait_write_ptr = 0; 465 unsigned long flags; 466 467 spin_lock_irqsave(&il->lock, flags); 468 if (il_is_rfkill(il)) { 469 D_DROP("Dropping - RF KILL\n"); 470 goto drop_unlock; 471 } 472 473 if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) == 474 IL_INVALID_RATE) { 475 IL_ERR("ERROR: No TX rate available.\n"); 476 goto drop_unlock; 477 } 478 479 fc = hdr->frame_control; 480 481 #ifdef CONFIG_IWLEGACY_DEBUG 482 if (ieee80211_is_auth(fc)) 483 D_TX("Sending AUTH frame\n"); 484 else if (ieee80211_is_assoc_req(fc)) 485 D_TX("Sending ASSOC frame\n"); 486 else if (ieee80211_is_reassoc_req(fc)) 487 D_TX("Sending REASSOC frame\n"); 488 #endif 489 490 spin_unlock_irqrestore(&il->lock, flags); 491 492 hdr_len = ieee80211_hdrlen(fc); 493 494 /* Find idx into station table for destination station */ 495 sta_id = il_sta_id_or_broadcast(il, sta); 496 if (sta_id == IL_INVALID_STATION) { 497 D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1); 498 goto drop; 499 } 500 501 D_RATE("station Id %d\n", sta_id); 502 503 if (ieee80211_is_data_qos(fc)) { 504 u8 *qc = ieee80211_get_qos_ctl(hdr); 505 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; 506 if (unlikely(tid >= MAX_TID_COUNT)) 507 goto drop; 508 } 509 510 /* Descriptor for chosen Tx queue */ 511 txq = &il->txq[txq_id]; 512 q = &txq->q; 513 514 if ((il_queue_space(q) < q->high_mark)) 515 goto drop; 516 517 spin_lock_irqsave(&il->lock, flags); 518 519 idx = il_get_cmd_idx(q, q->write_ptr, 0); 520 521 txq->skbs[q->write_ptr] = skb; 522 523 /* Init first empty entry in queue's array of Tx/cmd buffers */ 524 out_cmd = txq->cmd[idx]; 525 out_meta = &txq->meta[idx]; 526 tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload; 527 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); 528 memset(tx_cmd, 0, sizeof(*tx_cmd)); 529 530 /* 531 * Set up the Tx-command (not MAC!) header. 532 * Store the chosen Tx queue and TFD idx within the sequence field; 533 * after Tx, uCode's Tx response will return this value so driver can 534 * locate the frame within the tx queue and do post-tx processing. 535 */ 536 out_cmd->hdr.cmd = C_TX; 537 out_cmd->hdr.sequence = 538 cpu_to_le16((u16) 539 (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr))); 540 541 /* Copy MAC header from skb into command buffer */ 542 memcpy(tx_cmd->hdr, hdr, hdr_len); 543 544 if (info->control.hw_key) 545 il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id); 546 547 /* TODO need this for burst mode later on */ 548 il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id); 549 550 il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id); 551 552 /* Total # bytes to be transmitted */ 553 tx_cmd->len = cpu_to_le16((u16) skb->len); 554 555 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; 556 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; 557 558 /* 559 * Use the first empty entry in this queue's command buffer array 560 * to contain the Tx command and MAC header concatenated together 561 * (payload data will be in another buffer). 562 * Size of this varies, due to varying MAC header length. 563 * If end is not dword aligned, we'll have 2 extra bytes at the end 564 * of the MAC header (device reads on dword boundaries). 565 * We'll tell device about this padding later. 566 */ 567 len = 568 sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) + 569 hdr_len; 570 firstlen = (len + 3) & ~3; 571 572 /* Physical address of this Tx command's header (not MAC header!), 573 * within command buffer array. */ 574 txcmd_phys = 575 pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, 576 PCI_DMA_TODEVICE); 577 if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) 578 goto drop_unlock; 579 580 /* Set up TFD's 2nd entry to point directly to remainder of skb, 581 * if any (802.11 null frames have no payload). */ 582 secondlen = skb->len - hdr_len; 583 if (secondlen > 0) { 584 phys_addr = 585 pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, 586 PCI_DMA_TODEVICE); 587 if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) 588 goto drop_unlock; 589 } 590 591 /* Add buffer containing Tx command and MAC(!) header to TFD's 592 * first entry */ 593 il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); 594 dma_unmap_addr_set(out_meta, mapping, txcmd_phys); 595 dma_unmap_len_set(out_meta, len, firstlen); 596 if (secondlen > 0) 597 il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0, 598 U32_PAD(secondlen)); 599 600 if (!ieee80211_has_morefrags(hdr->frame_control)) { 601 txq->need_update = 1; 602 } else { 603 wait_write_ptr = 1; 604 txq->need_update = 0; 605 } 606 607 il_update_stats(il, true, fc, skb->len); 608 609 D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); 610 D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); 611 il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd)); 612 il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, 613 ieee80211_hdrlen(fc)); 614 615 /* Tell device the write idx *just past* this latest filled TFD */ 616 q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); 617 il_txq_update_write_ptr(il, txq); 618 spin_unlock_irqrestore(&il->lock, flags); 619 620 if (il_queue_space(q) < q->high_mark && il->mac80211_registered) { 621 if (wait_write_ptr) { 622 spin_lock_irqsave(&il->lock, flags); 623 txq->need_update = 1; 624 il_txq_update_write_ptr(il, txq); 625 spin_unlock_irqrestore(&il->lock, flags); 626 } 627 628 il_stop_queue(il, txq); 629 } 630 631 return 0; 632 633 drop_unlock: 634 spin_unlock_irqrestore(&il->lock, flags); 635 drop: 636 return -1; 637 } 638 639 static int 640 il3945_get_measurement(struct il_priv *il, 641 struct ieee80211_measurement_params *params, u8 type) 642 { 643 struct il_spectrum_cmd spectrum; 644 struct il_rx_pkt *pkt; 645 struct il_host_cmd cmd = { 646 .id = C_SPECTRUM_MEASUREMENT, 647 .data = (void *)&spectrum, 648 .flags = CMD_WANT_SKB, 649 }; 650 u32 add_time = le64_to_cpu(params->start_time); 651 int rc; 652 int spectrum_resp_status; 653 int duration = le16_to_cpu(params->duration); 654 655 if (il_is_associated(il)) 656 add_time = 657 il_usecs_to_beacons(il, 658 le64_to_cpu(params->start_time) - 659 il->_3945.last_tsf, 660 le16_to_cpu(il->timing.beacon_interval)); 661 662 memset(&spectrum, 0, sizeof(spectrum)); 663 664 spectrum.channel_count = cpu_to_le16(1); 665 spectrum.flags = 666 RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; 667 spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; 668 cmd.len = sizeof(spectrum); 669 spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); 670 671 if (il_is_associated(il)) 672 spectrum.start_time = 673 il_add_beacon_time(il, il->_3945.last_beacon_time, add_time, 674 le16_to_cpu(il->timing.beacon_interval)); 675 else 676 spectrum.start_time = 0; 677 678 spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); 679 spectrum.channels[0].channel = params->channel; 680 spectrum.channels[0].type = type; 681 if (il->active.flags & RXON_FLG_BAND_24G_MSK) 682 spectrum.flags |= 683 RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK | 684 RXON_FLG_TGG_PROTECT_MSK; 685 686 rc = il_send_cmd_sync(il, &cmd); 687 if (rc) 688 return rc; 689 690 pkt = (struct il_rx_pkt *)cmd.reply_page; 691 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) { 692 IL_ERR("Bad return from N_RX_ON_ASSOC command\n"); 693 rc = -EIO; 694 } 695 696 spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status); 697 switch (spectrum_resp_status) { 698 case 0: /* Command will be handled */ 699 if (pkt->u.spectrum.id != 0xff) { 700 D_INFO("Replaced existing measurement: %d\n", 701 pkt->u.spectrum.id); 702 il->measurement_status &= ~MEASUREMENT_READY; 703 } 704 il->measurement_status |= MEASUREMENT_ACTIVE; 705 rc = 0; 706 break; 707 708 case 1: /* Command will not be handled */ 709 rc = -EAGAIN; 710 break; 711 } 712 713 il_free_pages(il, cmd.reply_page); 714 715 return rc; 716 } 717 718 static void 719 il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb) 720 { 721 struct il_rx_pkt *pkt = rxb_addr(rxb); 722 struct il_alive_resp *palive; 723 struct delayed_work *pwork; 724 725 palive = &pkt->u.alive_frame; 726 727 D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n", 728 palive->is_valid, palive->ver_type, palive->ver_subtype); 729 730 if (palive->ver_subtype == INITIALIZE_SUBTYPE) { 731 D_INFO("Initialization Alive received.\n"); 732 memcpy(&il->card_alive_init, &pkt->u.alive_frame, 733 sizeof(struct il_alive_resp)); 734 pwork = &il->init_alive_start; 735 } else { 736 D_INFO("Runtime Alive received.\n"); 737 memcpy(&il->card_alive, &pkt->u.alive_frame, 738 sizeof(struct il_alive_resp)); 739 pwork = &il->alive_start; 740 il3945_disable_events(il); 741 } 742 743 /* We delay the ALIVE response by 5ms to 744 * give the HW RF Kill time to activate... */ 745 if (palive->is_valid == UCODE_VALID_OK) 746 queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5)); 747 else 748 IL_WARN("uCode did not respond OK.\n"); 749 } 750 751 static void 752 il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb) 753 { 754 #ifdef CONFIG_IWLEGACY_DEBUG 755 struct il_rx_pkt *pkt = rxb_addr(rxb); 756 #endif 757 758 D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status); 759 } 760 761 static void 762 il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb) 763 { 764 struct il_rx_pkt *pkt = rxb_addr(rxb); 765 struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status); 766 #ifdef CONFIG_IWLEGACY_DEBUG 767 u8 rate = beacon->beacon_notify_hdr.rate; 768 769 D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n", 770 le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK, 771 beacon->beacon_notify_hdr.failure_frame, 772 le32_to_cpu(beacon->ibss_mgr_status), 773 le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate); 774 #endif 775 776 il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); 777 778 } 779 780 /* Handle notification from uCode that card's power state is changing 781 * due to software, hardware, or critical temperature RFKILL */ 782 static void 783 il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb) 784 { 785 struct il_rx_pkt *pkt = rxb_addr(rxb); 786 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); 787 unsigned long status = il->status; 788 789 IL_WARN("Card state received: HW:%s SW:%s\n", 790 (flags & HW_CARD_DISABLED) ? "Kill" : "On", 791 (flags & SW_CARD_DISABLED) ? "Kill" : "On"); 792 793 _il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 794 795 if (flags & HW_CARD_DISABLED) 796 set_bit(S_RFKILL, &il->status); 797 else 798 clear_bit(S_RFKILL, &il->status); 799 800 il_scan_cancel(il); 801 802 if ((test_bit(S_RFKILL, &status) != 803 test_bit(S_RFKILL, &il->status))) 804 wiphy_rfkill_set_hw_state(il->hw->wiphy, 805 test_bit(S_RFKILL, &il->status)); 806 else 807 wake_up(&il->wait_command_queue); 808 } 809 810 /** 811 * il3945_setup_handlers - Initialize Rx handler callbacks 812 * 813 * Setup the RX handlers for each of the reply types sent from the uCode 814 * to the host. 815 * 816 * This function chains into the hardware specific files for them to setup 817 * any hardware specific handlers as well. 818 */ 819 static void 820 il3945_setup_handlers(struct il_priv *il) 821 { 822 il->handlers[N_ALIVE] = il3945_hdl_alive; 823 il->handlers[C_ADD_STA] = il3945_hdl_add_sta; 824 il->handlers[N_ERROR] = il_hdl_error; 825 il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa; 826 il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement; 827 il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep; 828 il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats; 829 il->handlers[N_BEACON] = il3945_hdl_beacon; 830 831 /* 832 * The same handler is used for both the REPLY to a discrete 833 * stats request from the host as well as for the periodic 834 * stats notifications (after received beacons) from the uCode. 835 */ 836 il->handlers[C_STATS] = il3945_hdl_c_stats; 837 il->handlers[N_STATS] = il3945_hdl_stats; 838 839 il_setup_rx_scan_handlers(il); 840 il->handlers[N_CARD_STATE] = il3945_hdl_card_state; 841 842 /* Set up hardware specific Rx handlers */ 843 il3945_hw_handler_setup(il); 844 } 845 846 /************************** RX-FUNCTIONS ****************************/ 847 /* 848 * Rx theory of operation 849 * 850 * The host allocates 32 DMA target addresses and passes the host address 851 * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is 852 * 0 to 31 853 * 854 * Rx Queue Indexes 855 * The host/firmware share two idx registers for managing the Rx buffers. 856 * 857 * The READ idx maps to the first position that the firmware may be writing 858 * to -- the driver can read up to (but not including) this position and get 859 * good data. 860 * The READ idx is managed by the firmware once the card is enabled. 861 * 862 * The WRITE idx maps to the last position the driver has read from -- the 863 * position preceding WRITE is the last slot the firmware can place a packet. 864 * 865 * The queue is empty (no good data) if WRITE = READ - 1, and is full if 866 * WRITE = READ. 867 * 868 * During initialization, the host sets up the READ queue position to the first 869 * IDX position, and WRITE to the last (READ - 1 wrapped) 870 * 871 * When the firmware places a packet in a buffer, it will advance the READ idx 872 * and fire the RX interrupt. The driver can then query the READ idx and 873 * process as many packets as possible, moving the WRITE idx forward as it 874 * resets the Rx queue buffers with new memory. 875 * 876 * The management in the driver is as follows: 877 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When 878 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled 879 * to replenish the iwl->rxq->rx_free. 880 * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the 881 * iwl->rxq is replenished and the READ IDX is updated (updating the 882 * 'processed' and 'read' driver idxes as well) 883 * + A received packet is processed and handed to the kernel network stack, 884 * detached from the iwl->rxq. The driver 'processed' idx is updated. 885 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free 886 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ 887 * IDX is not incremented and iwl->status(RX_STALLED) is set. If there 888 * were enough free buffers and RX_STALLED is set it is cleared. 889 * 890 * 891 * Driver sequence: 892 * 893 * il3945_rx_replenish() Replenishes rx_free list from rx_used, and calls 894 * il3945_rx_queue_restock 895 * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx 896 * queue, updates firmware pointers, and updates 897 * the WRITE idx. If insufficient rx_free buffers 898 * are available, schedules il3945_rx_replenish 899 * 900 * -- enable interrupts -- 901 * ISR - il3945_rx() Detach il_rx_bufs from pool up to the 902 * READ IDX, detaching the SKB from the pool. 903 * Moves the packet buffer from queue to rx_used. 904 * Calls il3945_rx_queue_restock to refill any empty 905 * slots. 906 * ... 907 * 908 */ 909 910 /** 911 * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr 912 */ 913 static inline __le32 914 il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr) 915 { 916 return cpu_to_le32((u32) dma_addr); 917 } 918 919 /** 920 * il3945_rx_queue_restock - refill RX queue from pre-allocated pool 921 * 922 * If there are slots in the RX queue that need to be restocked, 923 * and we have free pre-allocated buffers, fill the ranks as much 924 * as we can, pulling from rx_free. 925 * 926 * This moves the 'write' idx forward to catch up with 'processed', and 927 * also updates the memory address in the firmware to reference the new 928 * target buffer. 929 */ 930 static void 931 il3945_rx_queue_restock(struct il_priv *il) 932 { 933 struct il_rx_queue *rxq = &il->rxq; 934 struct list_head *element; 935 struct il_rx_buf *rxb; 936 unsigned long flags; 937 938 spin_lock_irqsave(&rxq->lock, flags); 939 while (il_rx_queue_space(rxq) > 0 && rxq->free_count) { 940 /* Get next free Rx buffer, remove from free list */ 941 element = rxq->rx_free.next; 942 rxb = list_entry(element, struct il_rx_buf, list); 943 list_del(element); 944 945 /* Point to Rx buffer via next RBD in circular buffer */ 946 rxq->bd[rxq->write] = 947 il3945_dma_addr2rbd_ptr(il, rxb->page_dma); 948 rxq->queue[rxq->write] = rxb; 949 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; 950 rxq->free_count--; 951 } 952 spin_unlock_irqrestore(&rxq->lock, flags); 953 /* If the pre-allocated buffer pool is dropping low, schedule to 954 * refill it */ 955 if (rxq->free_count <= RX_LOW_WATERMARK) 956 queue_work(il->workqueue, &il->rx_replenish); 957 958 /* If we've added more space for the firmware to place data, tell it. 959 * Increment device's write pointer in multiples of 8. */ 960 if (rxq->write_actual != (rxq->write & ~0x7) || 961 abs(rxq->write - rxq->read) > 7) { 962 spin_lock_irqsave(&rxq->lock, flags); 963 rxq->need_update = 1; 964 spin_unlock_irqrestore(&rxq->lock, flags); 965 il_rx_queue_update_write_ptr(il, rxq); 966 } 967 } 968 969 /** 970 * il3945_rx_replenish - Move all used packet from rx_used to rx_free 971 * 972 * When moving to rx_free an SKB is allocated for the slot. 973 * 974 * Also restock the Rx queue via il3945_rx_queue_restock. 975 * This is called as a scheduled work item (except for during initialization) 976 */ 977 static void 978 il3945_rx_allocate(struct il_priv *il, gfp_t priority) 979 { 980 struct il_rx_queue *rxq = &il->rxq; 981 struct list_head *element; 982 struct il_rx_buf *rxb; 983 struct page *page; 984 dma_addr_t page_dma; 985 unsigned long flags; 986 gfp_t gfp_mask = priority; 987 988 while (1) { 989 spin_lock_irqsave(&rxq->lock, flags); 990 if (list_empty(&rxq->rx_used)) { 991 spin_unlock_irqrestore(&rxq->lock, flags); 992 return; 993 } 994 spin_unlock_irqrestore(&rxq->lock, flags); 995 996 if (rxq->free_count > RX_LOW_WATERMARK) 997 gfp_mask |= __GFP_NOWARN; 998 999 if (il->hw_params.rx_page_order > 0) 1000 gfp_mask |= __GFP_COMP; 1001 1002 /* Alloc a new receive buffer */ 1003 page = alloc_pages(gfp_mask, il->hw_params.rx_page_order); 1004 if (!page) { 1005 if (net_ratelimit()) 1006 D_INFO("Failed to allocate SKB buffer.\n"); 1007 if (rxq->free_count <= RX_LOW_WATERMARK && 1008 net_ratelimit()) 1009 IL_ERR("Failed to allocate SKB buffer with %0x." 1010 "Only %u free buffers remaining.\n", 1011 priority, rxq->free_count); 1012 /* We don't reschedule replenish work here -- we will 1013 * call the restock method and if it still needs 1014 * more buffers it will schedule replenish */ 1015 break; 1016 } 1017 1018 /* Get physical address of RB/SKB */ 1019 page_dma = 1020 pci_map_page(il->pci_dev, page, 0, 1021 PAGE_SIZE << il->hw_params.rx_page_order, 1022 PCI_DMA_FROMDEVICE); 1023 1024 if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) { 1025 __free_pages(page, il->hw_params.rx_page_order); 1026 break; 1027 } 1028 1029 spin_lock_irqsave(&rxq->lock, flags); 1030 1031 if (list_empty(&rxq->rx_used)) { 1032 spin_unlock_irqrestore(&rxq->lock, flags); 1033 pci_unmap_page(il->pci_dev, page_dma, 1034 PAGE_SIZE << il->hw_params.rx_page_order, 1035 PCI_DMA_FROMDEVICE); 1036 __free_pages(page, il->hw_params.rx_page_order); 1037 return; 1038 } 1039 1040 element = rxq->rx_used.next; 1041 rxb = list_entry(element, struct il_rx_buf, list); 1042 list_del(element); 1043 1044 rxb->page = page; 1045 rxb->page_dma = page_dma; 1046 list_add_tail(&rxb->list, &rxq->rx_free); 1047 rxq->free_count++; 1048 il->alloc_rxb_page++; 1049 1050 spin_unlock_irqrestore(&rxq->lock, flags); 1051 } 1052 } 1053 1054 void 1055 il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq) 1056 { 1057 unsigned long flags; 1058 int i; 1059 spin_lock_irqsave(&rxq->lock, flags); 1060 INIT_LIST_HEAD(&rxq->rx_free); 1061 INIT_LIST_HEAD(&rxq->rx_used); 1062 /* Fill the rx_used queue with _all_ of the Rx buffers */ 1063 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { 1064 /* In the reset function, these buffers may have been allocated 1065 * to an SKB, so we need to unmap and free potential storage */ 1066 if (rxq->pool[i].page != NULL) { 1067 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, 1068 PAGE_SIZE << il->hw_params.rx_page_order, 1069 PCI_DMA_FROMDEVICE); 1070 __il_free_pages(il, rxq->pool[i].page); 1071 rxq->pool[i].page = NULL; 1072 } 1073 list_add_tail(&rxq->pool[i].list, &rxq->rx_used); 1074 } 1075 1076 /* Set us so that we have processed and used all buffers, but have 1077 * not restocked the Rx queue with fresh buffers */ 1078 rxq->read = rxq->write = 0; 1079 rxq->write_actual = 0; 1080 rxq->free_count = 0; 1081 spin_unlock_irqrestore(&rxq->lock, flags); 1082 } 1083 1084 void 1085 il3945_rx_replenish(void *data) 1086 { 1087 struct il_priv *il = data; 1088 unsigned long flags; 1089 1090 il3945_rx_allocate(il, GFP_KERNEL); 1091 1092 spin_lock_irqsave(&il->lock, flags); 1093 il3945_rx_queue_restock(il); 1094 spin_unlock_irqrestore(&il->lock, flags); 1095 } 1096 1097 static void 1098 il3945_rx_replenish_now(struct il_priv *il) 1099 { 1100 il3945_rx_allocate(il, GFP_ATOMIC); 1101 1102 il3945_rx_queue_restock(il); 1103 } 1104 1105 /* Assumes that the skb field of the buffers in 'pool' is kept accurate. 1106 * If an SKB has been detached, the POOL needs to have its SKB set to NULL 1107 * This free routine walks the list of POOL entries and if SKB is set to 1108 * non NULL it is unmapped and freed 1109 */ 1110 static void 1111 il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq) 1112 { 1113 int i; 1114 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { 1115 if (rxq->pool[i].page != NULL) { 1116 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, 1117 PAGE_SIZE << il->hw_params.rx_page_order, 1118 PCI_DMA_FROMDEVICE); 1119 __il_free_pages(il, rxq->pool[i].page); 1120 rxq->pool[i].page = NULL; 1121 } 1122 } 1123 1124 dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, 1125 rxq->bd_dma); 1126 dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status), 1127 rxq->rb_stts, rxq->rb_stts_dma); 1128 rxq->bd = NULL; 1129 rxq->rb_stts = NULL; 1130 } 1131 1132 /* Convert linear signal-to-noise ratio into dB */ 1133 static u8 ratio2dB[100] = { 1134 /* 0 1 2 3 4 5 6 7 8 9 */ 1135 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */ 1136 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */ 1137 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */ 1138 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */ 1139 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */ 1140 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */ 1141 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */ 1142 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */ 1143 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */ 1144 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */ 1145 }; 1146 1147 /* Calculates a relative dB value from a ratio of linear 1148 * (i.e. not dB) signal levels. 1149 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */ 1150 int 1151 il3945_calc_db_from_ratio(int sig_ratio) 1152 { 1153 /* 1000:1 or higher just report as 60 dB */ 1154 if (sig_ratio >= 1000) 1155 return 60; 1156 1157 /* 100:1 or higher, divide by 10 and use table, 1158 * add 20 dB to make up for divide by 10 */ 1159 if (sig_ratio >= 100) 1160 return 20 + (int)ratio2dB[sig_ratio / 10]; 1161 1162 /* We shouldn't see this */ 1163 if (sig_ratio < 1) 1164 return 0; 1165 1166 /* Use table for ratios 1:1 - 99:1 */ 1167 return (int)ratio2dB[sig_ratio]; 1168 } 1169 1170 /** 1171 * il3945_rx_handle - Main entry function for receiving responses from uCode 1172 * 1173 * Uses the il->handlers callback function array to invoke 1174 * the appropriate handlers, including command responses, 1175 * frame-received notifications, and other notifications. 1176 */ 1177 static void 1178 il3945_rx_handle(struct il_priv *il) 1179 { 1180 struct il_rx_buf *rxb; 1181 struct il_rx_pkt *pkt; 1182 struct il_rx_queue *rxq = &il->rxq; 1183 u32 r, i; 1184 int reclaim; 1185 unsigned long flags; 1186 u8 fill_rx = 0; 1187 u32 count = 8; 1188 int total_empty = 0; 1189 1190 /* uCode's read idx (stored in shared DRAM) indicates the last Rx 1191 * buffer that the driver may process (last buffer filled by ucode). */ 1192 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; 1193 i = rxq->read; 1194 1195 /* calculate total frames need to be restock after handling RX */ 1196 total_empty = r - rxq->write_actual; 1197 if (total_empty < 0) 1198 total_empty += RX_QUEUE_SIZE; 1199 1200 if (total_empty > (RX_QUEUE_SIZE / 2)) 1201 fill_rx = 1; 1202 /* Rx interrupt, but nothing sent from uCode */ 1203 if (i == r) 1204 D_RX("r = %d, i = %d\n", r, i); 1205 1206 while (i != r) { 1207 int len; 1208 1209 rxb = rxq->queue[i]; 1210 1211 /* If an RXB doesn't have a Rx queue slot associated with it, 1212 * then a bug has been introduced in the queue refilling 1213 * routines -- catch it here */ 1214 BUG_ON(rxb == NULL); 1215 1216 rxq->queue[i] = NULL; 1217 1218 pci_unmap_page(il->pci_dev, rxb->page_dma, 1219 PAGE_SIZE << il->hw_params.rx_page_order, 1220 PCI_DMA_FROMDEVICE); 1221 pkt = rxb_addr(rxb); 1222 1223 len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK; 1224 len += sizeof(u32); /* account for status word */ 1225 1226 reclaim = il_need_reclaim(il, pkt); 1227 1228 /* Based on type of command response or notification, 1229 * handle those that need handling via function in 1230 * handlers table. See il3945_setup_handlers() */ 1231 if (il->handlers[pkt->hdr.cmd]) { 1232 D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i, 1233 il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); 1234 il->isr_stats.handlers[pkt->hdr.cmd]++; 1235 il->handlers[pkt->hdr.cmd] (il, rxb); 1236 } else { 1237 /* No handling needed */ 1238 D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r, 1239 i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); 1240 } 1241 1242 /* 1243 * XXX: After here, we should always check rxb->page 1244 * against NULL before touching it or its virtual 1245 * memory (pkt). Because some handler might have 1246 * already taken or freed the pages. 1247 */ 1248 1249 if (reclaim) { 1250 /* Invoke any callbacks, transfer the buffer to caller, 1251 * and fire off the (possibly) blocking il_send_cmd() 1252 * as we reclaim the driver command queue */ 1253 if (rxb->page) 1254 il_tx_cmd_complete(il, rxb); 1255 else 1256 IL_WARN("Claim null rxb?\n"); 1257 } 1258 1259 /* Reuse the page if possible. For notification packets and 1260 * SKBs that fail to Rx correctly, add them back into the 1261 * rx_free list for reuse later. */ 1262 spin_lock_irqsave(&rxq->lock, flags); 1263 if (rxb->page != NULL) { 1264 rxb->page_dma = 1265 pci_map_page(il->pci_dev, rxb->page, 0, 1266 PAGE_SIZE << il->hw_params. 1267 rx_page_order, PCI_DMA_FROMDEVICE); 1268 if (unlikely(pci_dma_mapping_error(il->pci_dev, 1269 rxb->page_dma))) { 1270 __il_free_pages(il, rxb->page); 1271 rxb->page = NULL; 1272 list_add_tail(&rxb->list, &rxq->rx_used); 1273 } else { 1274 list_add_tail(&rxb->list, &rxq->rx_free); 1275 rxq->free_count++; 1276 } 1277 } else 1278 list_add_tail(&rxb->list, &rxq->rx_used); 1279 1280 spin_unlock_irqrestore(&rxq->lock, flags); 1281 1282 i = (i + 1) & RX_QUEUE_MASK; 1283 /* If there are a lot of unused frames, 1284 * restock the Rx queue so ucode won't assert. */ 1285 if (fill_rx) { 1286 count++; 1287 if (count >= 8) { 1288 rxq->read = i; 1289 il3945_rx_replenish_now(il); 1290 count = 0; 1291 } 1292 } 1293 } 1294 1295 /* Backtrack one entry */ 1296 rxq->read = i; 1297 if (fill_rx) 1298 il3945_rx_replenish_now(il); 1299 else 1300 il3945_rx_queue_restock(il); 1301 } 1302 1303 /* call this function to flush any scheduled tasklet */ 1304 static inline void 1305 il3945_synchronize_irq(struct il_priv *il) 1306 { 1307 /* wait to make sure we flush pending tasklet */ 1308 synchronize_irq(il->pci_dev->irq); 1309 tasklet_kill(&il->irq_tasklet); 1310 } 1311 1312 static const char * 1313 il3945_desc_lookup(int i) 1314 { 1315 switch (i) { 1316 case 1: 1317 return "FAIL"; 1318 case 2: 1319 return "BAD_PARAM"; 1320 case 3: 1321 return "BAD_CHECKSUM"; 1322 case 4: 1323 return "NMI_INTERRUPT"; 1324 case 5: 1325 return "SYSASSERT"; 1326 case 6: 1327 return "FATAL_ERROR"; 1328 } 1329 1330 return "UNKNOWN"; 1331 } 1332 1333 #define ERROR_START_OFFSET (1 * sizeof(u32)) 1334 #define ERROR_ELEM_SIZE (7 * sizeof(u32)) 1335 1336 void 1337 il3945_dump_nic_error_log(struct il_priv *il) 1338 { 1339 u32 i; 1340 u32 desc, time, count, base, data1; 1341 u32 blink1, blink2, ilink1, ilink2; 1342 1343 base = le32_to_cpu(il->card_alive.error_event_table_ptr); 1344 1345 if (!il3945_hw_valid_rtc_data_addr(base)) { 1346 IL_ERR("Not valid error log pointer 0x%08X\n", base); 1347 return; 1348 } 1349 1350 count = il_read_targ_mem(il, base); 1351 1352 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { 1353 IL_ERR("Start IWL Error Log Dump:\n"); 1354 IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count); 1355 } 1356 1357 IL_ERR("Desc Time asrtPC blink2 " 1358 "ilink1 nmiPC Line\n"); 1359 for (i = ERROR_START_OFFSET; 1360 i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET; 1361 i += ERROR_ELEM_SIZE) { 1362 desc = il_read_targ_mem(il, base + i); 1363 time = il_read_targ_mem(il, base + i + 1 * sizeof(u32)); 1364 blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32)); 1365 blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32)); 1366 ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32)); 1367 ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32)); 1368 data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32)); 1369 1370 IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n", 1371 il3945_desc_lookup(desc), desc, time, blink1, blink2, 1372 ilink1, ilink2, data1); 1373 } 1374 } 1375 1376 static void 1377 il3945_irq_tasklet(unsigned long data) 1378 { 1379 struct il_priv *il = (struct il_priv *)data; 1380 u32 inta, handled = 0; 1381 u32 inta_fh; 1382 unsigned long flags; 1383 #ifdef CONFIG_IWLEGACY_DEBUG 1384 u32 inta_mask; 1385 #endif 1386 1387 spin_lock_irqsave(&il->lock, flags); 1388 1389 /* Ack/clear/reset pending uCode interrupts. 1390 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, 1391 * and will clear only when CSR_FH_INT_STATUS gets cleared. */ 1392 inta = _il_rd(il, CSR_INT); 1393 _il_wr(il, CSR_INT, inta); 1394 1395 /* Ack/clear/reset pending flow-handler (DMA) interrupts. 1396 * Any new interrupts that happen after this, either while we're 1397 * in this tasklet, or later, will show up in next ISR/tasklet. */ 1398 inta_fh = _il_rd(il, CSR_FH_INT_STATUS); 1399 _il_wr(il, CSR_FH_INT_STATUS, inta_fh); 1400 1401 #ifdef CONFIG_IWLEGACY_DEBUG 1402 if (il_get_debug_level(il) & IL_DL_ISR) { 1403 /* just for debug */ 1404 inta_mask = _il_rd(il, CSR_INT_MASK); 1405 D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, 1406 inta_mask, inta_fh); 1407 } 1408 #endif 1409 1410 spin_unlock_irqrestore(&il->lock, flags); 1411 1412 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not 1413 * atomic, make sure that inta covers all the interrupts that 1414 * we've discovered, even if FH interrupt came in just after 1415 * reading CSR_INT. */ 1416 if (inta_fh & CSR39_FH_INT_RX_MASK) 1417 inta |= CSR_INT_BIT_FH_RX; 1418 if (inta_fh & CSR39_FH_INT_TX_MASK) 1419 inta |= CSR_INT_BIT_FH_TX; 1420 1421 /* Now service all interrupt bits discovered above. */ 1422 if (inta & CSR_INT_BIT_HW_ERR) { 1423 IL_ERR("Hardware error detected. Restarting.\n"); 1424 1425 /* Tell the device to stop sending interrupts */ 1426 il_disable_interrupts(il); 1427 1428 il->isr_stats.hw++; 1429 il_irq_handle_error(il); 1430 1431 handled |= CSR_INT_BIT_HW_ERR; 1432 1433 return; 1434 } 1435 #ifdef CONFIG_IWLEGACY_DEBUG 1436 if (il_get_debug_level(il) & (IL_DL_ISR)) { 1437 /* NIC fires this, but we don't use it, redundant with WAKEUP */ 1438 if (inta & CSR_INT_BIT_SCD) { 1439 D_ISR("Scheduler finished to transmit " 1440 "the frame/frames.\n"); 1441 il->isr_stats.sch++; 1442 } 1443 1444 /* Alive notification via Rx interrupt will do the real work */ 1445 if (inta & CSR_INT_BIT_ALIVE) { 1446 D_ISR("Alive interrupt\n"); 1447 il->isr_stats.alive++; 1448 } 1449 } 1450 #endif 1451 /* Safely ignore these bits for debug checks below */ 1452 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); 1453 1454 /* Error detected by uCode */ 1455 if (inta & CSR_INT_BIT_SW_ERR) { 1456 IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n", 1457 inta); 1458 il->isr_stats.sw++; 1459 il_irq_handle_error(il); 1460 handled |= CSR_INT_BIT_SW_ERR; 1461 } 1462 1463 /* uCode wakes up after power-down sleep */ 1464 if (inta & CSR_INT_BIT_WAKEUP) { 1465 D_ISR("Wakeup interrupt\n"); 1466 il_rx_queue_update_write_ptr(il, &il->rxq); 1467 1468 spin_lock_irqsave(&il->lock, flags); 1469 il_txq_update_write_ptr(il, &il->txq[0]); 1470 il_txq_update_write_ptr(il, &il->txq[1]); 1471 il_txq_update_write_ptr(il, &il->txq[2]); 1472 il_txq_update_write_ptr(il, &il->txq[3]); 1473 il_txq_update_write_ptr(il, &il->txq[4]); 1474 spin_unlock_irqrestore(&il->lock, flags); 1475 1476 il->isr_stats.wakeup++; 1477 handled |= CSR_INT_BIT_WAKEUP; 1478 } 1479 1480 /* All uCode command responses, including Tx command responses, 1481 * Rx "responses" (frame-received notification), and other 1482 * notifications from uCode come through here*/ 1483 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { 1484 il3945_rx_handle(il); 1485 il->isr_stats.rx++; 1486 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); 1487 } 1488 1489 if (inta & CSR_INT_BIT_FH_TX) { 1490 D_ISR("Tx interrupt\n"); 1491 il->isr_stats.tx++; 1492 1493 _il_wr(il, CSR_FH_INT_STATUS, (1 << 6)); 1494 il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0); 1495 handled |= CSR_INT_BIT_FH_TX; 1496 } 1497 1498 if (inta & ~handled) { 1499 IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled); 1500 il->isr_stats.unhandled++; 1501 } 1502 1503 if (inta & ~il->inta_mask) { 1504 IL_WARN("Disabled INTA bits 0x%08x were pending\n", 1505 inta & ~il->inta_mask); 1506 IL_WARN(" with inta_fh = 0x%08x\n", inta_fh); 1507 } 1508 1509 /* Re-enable all interrupts */ 1510 /* only Re-enable if disabled by irq */ 1511 if (test_bit(S_INT_ENABLED, &il->status)) 1512 il_enable_interrupts(il); 1513 1514 #ifdef CONFIG_IWLEGACY_DEBUG 1515 if (il_get_debug_level(il) & (IL_DL_ISR)) { 1516 inta = _il_rd(il, CSR_INT); 1517 inta_mask = _il_rd(il, CSR_INT_MASK); 1518 inta_fh = _il_rd(il, CSR_FH_INT_STATUS); 1519 D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " 1520 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); 1521 } 1522 #endif 1523 } 1524 1525 static int 1526 il3945_get_channels_for_scan(struct il_priv *il, enum nl80211_band band, 1527 u8 is_active, u8 n_probes, 1528 struct il3945_scan_channel *scan_ch, 1529 struct ieee80211_vif *vif) 1530 { 1531 struct ieee80211_channel *chan; 1532 const struct ieee80211_supported_band *sband; 1533 const struct il_channel_info *ch_info; 1534 u16 passive_dwell = 0; 1535 u16 active_dwell = 0; 1536 int added, i; 1537 1538 sband = il_get_hw_mode(il, band); 1539 if (!sband) 1540 return 0; 1541 1542 active_dwell = il_get_active_dwell_time(il, band, n_probes); 1543 passive_dwell = il_get_passive_dwell_time(il, band, vif); 1544 1545 if (passive_dwell <= active_dwell) 1546 passive_dwell = active_dwell + 1; 1547 1548 for (i = 0, added = 0; i < il->scan_request->n_channels; i++) { 1549 chan = il->scan_request->channels[i]; 1550 1551 if (chan->band != band) 1552 continue; 1553 1554 scan_ch->channel = chan->hw_value; 1555 1556 ch_info = il_get_channel_info(il, band, scan_ch->channel); 1557 if (!il_is_channel_valid(ch_info)) { 1558 D_SCAN("Channel %d is INVALID for this band.\n", 1559 scan_ch->channel); 1560 continue; 1561 } 1562 1563 scan_ch->active_dwell = cpu_to_le16(active_dwell); 1564 scan_ch->passive_dwell = cpu_to_le16(passive_dwell); 1565 /* If passive , set up for auto-switch 1566 * and use long active_dwell time. 1567 */ 1568 if (!is_active || il_is_channel_passive(ch_info) || 1569 (chan->flags & IEEE80211_CHAN_NO_IR)) { 1570 scan_ch->type = 0; /* passive */ 1571 if (IL_UCODE_API(il->ucode_ver) == 1) 1572 scan_ch->active_dwell = 1573 cpu_to_le16(passive_dwell - 1); 1574 } else { 1575 scan_ch->type = 1; /* active */ 1576 } 1577 1578 /* Set direct probe bits. These may be used both for active 1579 * scan channels (probes gets sent right away), 1580 * or for passive channels (probes get se sent only after 1581 * hearing clear Rx packet).*/ 1582 if (IL_UCODE_API(il->ucode_ver) >= 2) { 1583 if (n_probes) 1584 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes); 1585 } else { 1586 /* uCode v1 does not allow setting direct probe bits on 1587 * passive channel. */ 1588 if ((scan_ch->type & 1) && n_probes) 1589 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes); 1590 } 1591 1592 /* Set txpower levels to defaults */ 1593 scan_ch->tpc.dsp_atten = 110; 1594 /* scan_pwr_info->tpc.dsp_atten; */ 1595 1596 /*scan_pwr_info->tpc.tx_gain; */ 1597 if (band == NL80211_BAND_5GHZ) 1598 scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; 1599 else { 1600 scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); 1601 /* NOTE: if we were doing 6Mb OFDM for scans we'd use 1602 * power level: 1603 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3; 1604 */ 1605 } 1606 1607 D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel, 1608 (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE", 1609 (scan_ch->type & 1) ? active_dwell : passive_dwell); 1610 1611 scan_ch++; 1612 added++; 1613 } 1614 1615 D_SCAN("total channels to scan %d\n", added); 1616 return added; 1617 } 1618 1619 static void 1620 il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates) 1621 { 1622 int i; 1623 1624 for (i = 0; i < RATE_COUNT_LEGACY; i++) { 1625 rates[i].bitrate = il3945_rates[i].ieee * 5; 1626 rates[i].hw_value = i; /* Rate scaling will work on idxes */ 1627 rates[i].hw_value_short = i; 1628 rates[i].flags = 0; 1629 if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) { 1630 /* 1631 * If CCK != 1M then set short preamble rate flag. 1632 */ 1633 rates[i].flags |= 1634 (il3945_rates[i].plcp == 1635 10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE; 1636 } 1637 } 1638 } 1639 1640 /****************************************************************************** 1641 * 1642 * uCode download functions 1643 * 1644 ******************************************************************************/ 1645 1646 static void 1647 il3945_dealloc_ucode_pci(struct il_priv *il) 1648 { 1649 il_free_fw_desc(il->pci_dev, &il->ucode_code); 1650 il_free_fw_desc(il->pci_dev, &il->ucode_data); 1651 il_free_fw_desc(il->pci_dev, &il->ucode_data_backup); 1652 il_free_fw_desc(il->pci_dev, &il->ucode_init); 1653 il_free_fw_desc(il->pci_dev, &il->ucode_init_data); 1654 il_free_fw_desc(il->pci_dev, &il->ucode_boot); 1655 } 1656 1657 /** 1658 * il3945_verify_inst_full - verify runtime uCode image in card vs. host, 1659 * looking at all data. 1660 */ 1661 static int 1662 il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len) 1663 { 1664 u32 val; 1665 u32 save_len = len; 1666 int rc = 0; 1667 u32 errcnt; 1668 1669 D_INFO("ucode inst image size is %u\n", len); 1670 1671 il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND); 1672 1673 errcnt = 0; 1674 for (; len > 0; len -= sizeof(u32), image++) { 1675 /* read data comes through single port, auto-incr addr */ 1676 /* NOTE: Use the debugless read so we don't flood kernel log 1677 * if IL_DL_IO is set */ 1678 val = _il_rd(il, HBUS_TARG_MEM_RDAT); 1679 if (val != le32_to_cpu(*image)) { 1680 IL_ERR("uCode INST section is invalid at " 1681 "offset 0x%x, is 0x%x, s/b 0x%x\n", 1682 save_len - len, val, le32_to_cpu(*image)); 1683 rc = -EIO; 1684 errcnt++; 1685 if (errcnt >= 20) 1686 break; 1687 } 1688 } 1689 1690 if (!errcnt) 1691 D_INFO("ucode image in INSTRUCTION memory is good\n"); 1692 1693 return rc; 1694 } 1695 1696 /** 1697 * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host, 1698 * using sample data 100 bytes apart. If these sample points are good, 1699 * it's a pretty good bet that everything between them is good, too. 1700 */ 1701 static int 1702 il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len) 1703 { 1704 u32 val; 1705 int rc = 0; 1706 u32 errcnt = 0; 1707 u32 i; 1708 1709 D_INFO("ucode inst image size is %u\n", len); 1710 1711 for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) { 1712 /* read data comes through single port, auto-incr addr */ 1713 /* NOTE: Use the debugless read so we don't flood kernel log 1714 * if IL_DL_IO is set */ 1715 il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND); 1716 val = _il_rd(il, HBUS_TARG_MEM_RDAT); 1717 if (val != le32_to_cpu(*image)) { 1718 #if 0 /* Enable this if you want to see details */ 1719 IL_ERR("uCode INST section is invalid at " 1720 "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val, 1721 *image); 1722 #endif 1723 rc = -EIO; 1724 errcnt++; 1725 if (errcnt >= 3) 1726 break; 1727 } 1728 } 1729 1730 return rc; 1731 } 1732 1733 /** 1734 * il3945_verify_ucode - determine which instruction image is in SRAM, 1735 * and verify its contents 1736 */ 1737 static int 1738 il3945_verify_ucode(struct il_priv *il) 1739 { 1740 __le32 *image; 1741 u32 len; 1742 int rc = 0; 1743 1744 /* Try bootstrap */ 1745 image = (__le32 *) il->ucode_boot.v_addr; 1746 len = il->ucode_boot.len; 1747 rc = il3945_verify_inst_sparse(il, image, len); 1748 if (rc == 0) { 1749 D_INFO("Bootstrap uCode is good in inst SRAM\n"); 1750 return 0; 1751 } 1752 1753 /* Try initialize */ 1754 image = (__le32 *) il->ucode_init.v_addr; 1755 len = il->ucode_init.len; 1756 rc = il3945_verify_inst_sparse(il, image, len); 1757 if (rc == 0) { 1758 D_INFO("Initialize uCode is good in inst SRAM\n"); 1759 return 0; 1760 } 1761 1762 /* Try runtime/protocol */ 1763 image = (__le32 *) il->ucode_code.v_addr; 1764 len = il->ucode_code.len; 1765 rc = il3945_verify_inst_sparse(il, image, len); 1766 if (rc == 0) { 1767 D_INFO("Runtime uCode is good in inst SRAM\n"); 1768 return 0; 1769 } 1770 1771 IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); 1772 1773 /* Since nothing seems to match, show first several data entries in 1774 * instruction SRAM, so maybe visual inspection will give a clue. 1775 * Selection of bootstrap image (vs. other images) is arbitrary. */ 1776 image = (__le32 *) il->ucode_boot.v_addr; 1777 len = il->ucode_boot.len; 1778 rc = il3945_verify_inst_full(il, image, len); 1779 1780 return rc; 1781 } 1782 1783 static void 1784 il3945_nic_start(struct il_priv *il) 1785 { 1786 /* Remove all resets to allow NIC to operate */ 1787 _il_wr(il, CSR_RESET, 0); 1788 } 1789 1790 #define IL3945_UCODE_GET(item) \ 1791 static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\ 1792 { \ 1793 return le32_to_cpu(ucode->v1.item); \ 1794 } 1795 1796 static u32 1797 il3945_ucode_get_header_size(u32 api_ver) 1798 { 1799 return 24; 1800 } 1801 1802 static u8 * 1803 il3945_ucode_get_data(const struct il_ucode_header *ucode) 1804 { 1805 return (u8 *) ucode->v1.data; 1806 } 1807 1808 IL3945_UCODE_GET(inst_size); 1809 IL3945_UCODE_GET(data_size); 1810 IL3945_UCODE_GET(init_size); 1811 IL3945_UCODE_GET(init_data_size); 1812 IL3945_UCODE_GET(boot_size); 1813 1814 /** 1815 * il3945_read_ucode - Read uCode images from disk file. 1816 * 1817 * Copy into buffers for card to fetch via bus-mastering 1818 */ 1819 static int 1820 il3945_read_ucode(struct il_priv *il) 1821 { 1822 const struct il_ucode_header *ucode; 1823 int ret = -EINVAL, idx; 1824 const struct firmware *ucode_raw; 1825 /* firmware file name contains uCode/driver compatibility version */ 1826 const char *name_pre = il->cfg->fw_name_pre; 1827 const unsigned int api_max = il->cfg->ucode_api_max; 1828 const unsigned int api_min = il->cfg->ucode_api_min; 1829 char buf[25]; 1830 u8 *src; 1831 size_t len; 1832 u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size; 1833 1834 /* Ask kernel firmware_class module to get the boot firmware off disk. 1835 * request_firmware() is synchronous, file is in memory on return. */ 1836 for (idx = api_max; idx >= api_min; idx--) { 1837 sprintf(buf, "%s%u%s", name_pre, idx, ".ucode"); 1838 ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev); 1839 if (ret < 0) { 1840 IL_ERR("%s firmware file req failed: %d\n", buf, ret); 1841 if (ret == -ENOENT) 1842 continue; 1843 else 1844 goto error; 1845 } else { 1846 if (idx < api_max) 1847 IL_ERR("Loaded firmware %s, " 1848 "which is deprecated. " 1849 " Please use API v%u instead.\n", buf, 1850 api_max); 1851 D_INFO("Got firmware '%s' file " 1852 "(%zd bytes) from disk\n", buf, ucode_raw->size); 1853 break; 1854 } 1855 } 1856 1857 if (ret < 0) 1858 goto error; 1859 1860 /* Make sure that we got at least our header! */ 1861 if (ucode_raw->size < il3945_ucode_get_header_size(1)) { 1862 IL_ERR("File size way too small!\n"); 1863 ret = -EINVAL; 1864 goto err_release; 1865 } 1866 1867 /* Data from ucode file: header followed by uCode images */ 1868 ucode = (struct il_ucode_header *)ucode_raw->data; 1869 1870 il->ucode_ver = le32_to_cpu(ucode->ver); 1871 api_ver = IL_UCODE_API(il->ucode_ver); 1872 inst_size = il3945_ucode_get_inst_size(ucode); 1873 data_size = il3945_ucode_get_data_size(ucode); 1874 init_size = il3945_ucode_get_init_size(ucode); 1875 init_data_size = il3945_ucode_get_init_data_size(ucode); 1876 boot_size = il3945_ucode_get_boot_size(ucode); 1877 src = il3945_ucode_get_data(ucode); 1878 1879 /* api_ver should match the api version forming part of the 1880 * firmware filename ... but we don't check for that and only rely 1881 * on the API version read from firmware header from here on forward */ 1882 1883 if (api_ver < api_min || api_ver > api_max) { 1884 IL_ERR("Driver unable to support your firmware API. " 1885 "Driver supports v%u, firmware is v%u.\n", api_max, 1886 api_ver); 1887 il->ucode_ver = 0; 1888 ret = -EINVAL; 1889 goto err_release; 1890 } 1891 if (api_ver != api_max) 1892 IL_ERR("Firmware has old API version. Expected %u, " 1893 "got %u. New firmware can be obtained " 1894 "from http://www.intellinuxwireless.org.\n", api_max, 1895 api_ver); 1896 1897 IL_INFO("loaded firmware version %u.%u.%u.%u\n", 1898 IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver), 1899 IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver)); 1900 1901 snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version), 1902 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver), 1903 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver), 1904 IL_UCODE_SERIAL(il->ucode_ver)); 1905 1906 D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver); 1907 D_INFO("f/w package hdr runtime inst size = %u\n", inst_size); 1908 D_INFO("f/w package hdr runtime data size = %u\n", data_size); 1909 D_INFO("f/w package hdr init inst size = %u\n", init_size); 1910 D_INFO("f/w package hdr init data size = %u\n", init_data_size); 1911 D_INFO("f/w package hdr boot inst size = %u\n", boot_size); 1912 1913 /* Verify size of file vs. image size info in file's header */ 1914 if (ucode_raw->size != 1915 il3945_ucode_get_header_size(api_ver) + inst_size + data_size + 1916 init_size + init_data_size + boot_size) { 1917 1918 D_INFO("uCode file size %zd does not match expected size\n", 1919 ucode_raw->size); 1920 ret = -EINVAL; 1921 goto err_release; 1922 } 1923 1924 /* Verify that uCode images will fit in card's SRAM */ 1925 if (inst_size > IL39_MAX_INST_SIZE) { 1926 D_INFO("uCode instr len %d too large to fit in\n", inst_size); 1927 ret = -EINVAL; 1928 goto err_release; 1929 } 1930 1931 if (data_size > IL39_MAX_DATA_SIZE) { 1932 D_INFO("uCode data len %d too large to fit in\n", data_size); 1933 ret = -EINVAL; 1934 goto err_release; 1935 } 1936 if (init_size > IL39_MAX_INST_SIZE) { 1937 D_INFO("uCode init instr len %d too large to fit in\n", 1938 init_size); 1939 ret = -EINVAL; 1940 goto err_release; 1941 } 1942 if (init_data_size > IL39_MAX_DATA_SIZE) { 1943 D_INFO("uCode init data len %d too large to fit in\n", 1944 init_data_size); 1945 ret = -EINVAL; 1946 goto err_release; 1947 } 1948 if (boot_size > IL39_MAX_BSM_SIZE) { 1949 D_INFO("uCode boot instr len %d too large to fit in\n", 1950 boot_size); 1951 ret = -EINVAL; 1952 goto err_release; 1953 } 1954 1955 /* Allocate ucode buffers for card's bus-master loading ... */ 1956 1957 /* Runtime instructions and 2 copies of data: 1958 * 1) unmodified from disk 1959 * 2) backup cache for save/restore during power-downs */ 1960 il->ucode_code.len = inst_size; 1961 il_alloc_fw_desc(il->pci_dev, &il->ucode_code); 1962 1963 il->ucode_data.len = data_size; 1964 il_alloc_fw_desc(il->pci_dev, &il->ucode_data); 1965 1966 il->ucode_data_backup.len = data_size; 1967 il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup); 1968 1969 if (!il->ucode_code.v_addr || !il->ucode_data.v_addr || 1970 !il->ucode_data_backup.v_addr) 1971 goto err_pci_alloc; 1972 1973 /* Initialization instructions and data */ 1974 if (init_size && init_data_size) { 1975 il->ucode_init.len = init_size; 1976 il_alloc_fw_desc(il->pci_dev, &il->ucode_init); 1977 1978 il->ucode_init_data.len = init_data_size; 1979 il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data); 1980 1981 if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr) 1982 goto err_pci_alloc; 1983 } 1984 1985 /* Bootstrap (instructions only, no data) */ 1986 if (boot_size) { 1987 il->ucode_boot.len = boot_size; 1988 il_alloc_fw_desc(il->pci_dev, &il->ucode_boot); 1989 1990 if (!il->ucode_boot.v_addr) 1991 goto err_pci_alloc; 1992 } 1993 1994 /* Copy images into buffers for card's bus-master reads ... */ 1995 1996 /* Runtime instructions (first block of data in file) */ 1997 len = inst_size; 1998 D_INFO("Copying (but not loading) uCode instr len %zd\n", len); 1999 memcpy(il->ucode_code.v_addr, src, len); 2000 src += len; 2001 2002 D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", 2003 il->ucode_code.v_addr, (u32) il->ucode_code.p_addr); 2004 2005 /* Runtime data (2nd block) 2006 * NOTE: Copy into backup buffer will be done in il3945_up() */ 2007 len = data_size; 2008 D_INFO("Copying (but not loading) uCode data len %zd\n", len); 2009 memcpy(il->ucode_data.v_addr, src, len); 2010 memcpy(il->ucode_data_backup.v_addr, src, len); 2011 src += len; 2012 2013 /* Initialization instructions (3rd block) */ 2014 if (init_size) { 2015 len = init_size; 2016 D_INFO("Copying (but not loading) init instr len %zd\n", len); 2017 memcpy(il->ucode_init.v_addr, src, len); 2018 src += len; 2019 } 2020 2021 /* Initialization data (4th block) */ 2022 if (init_data_size) { 2023 len = init_data_size; 2024 D_INFO("Copying (but not loading) init data len %zd\n", len); 2025 memcpy(il->ucode_init_data.v_addr, src, len); 2026 src += len; 2027 } 2028 2029 /* Bootstrap instructions (5th block) */ 2030 len = boot_size; 2031 D_INFO("Copying (but not loading) boot instr len %zd\n", len); 2032 memcpy(il->ucode_boot.v_addr, src, len); 2033 2034 /* We have our copies now, allow OS release its copies */ 2035 release_firmware(ucode_raw); 2036 return 0; 2037 2038 err_pci_alloc: 2039 IL_ERR("failed to allocate pci memory\n"); 2040 ret = -ENOMEM; 2041 il3945_dealloc_ucode_pci(il); 2042 2043 err_release: 2044 release_firmware(ucode_raw); 2045 2046 error: 2047 return ret; 2048 } 2049 2050 /** 2051 * il3945_set_ucode_ptrs - Set uCode address location 2052 * 2053 * Tell initialization uCode where to find runtime uCode. 2054 * 2055 * BSM registers initially contain pointers to initialization uCode. 2056 * We need to replace them to load runtime uCode inst and data, 2057 * and to save runtime data when powering down. 2058 */ 2059 static int 2060 il3945_set_ucode_ptrs(struct il_priv *il) 2061 { 2062 dma_addr_t pinst; 2063 dma_addr_t pdata; 2064 2065 /* bits 31:0 for 3945 */ 2066 pinst = il->ucode_code.p_addr; 2067 pdata = il->ucode_data_backup.p_addr; 2068 2069 /* Tell bootstrap uCode where to find image to load */ 2070 il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst); 2071 il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata); 2072 il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len); 2073 2074 /* Inst byte count must be last to set up, bit 31 signals uCode 2075 * that all new ptr/size info is in place */ 2076 il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, 2077 il->ucode_code.len | BSM_DRAM_INST_LOAD); 2078 2079 D_INFO("Runtime uCode pointers are set.\n"); 2080 2081 return 0; 2082 } 2083 2084 /** 2085 * il3945_init_alive_start - Called after N_ALIVE notification received 2086 * 2087 * Called after N_ALIVE notification received from "initialize" uCode. 2088 * 2089 * Tell "initialize" uCode to go ahead and load the runtime uCode. 2090 */ 2091 static void 2092 il3945_init_alive_start(struct il_priv *il) 2093 { 2094 /* Check alive response for "valid" sign from uCode */ 2095 if (il->card_alive_init.is_valid != UCODE_VALID_OK) { 2096 /* We had an error bringing up the hardware, so take it 2097 * all the way back down so we can try again */ 2098 D_INFO("Initialize Alive failed.\n"); 2099 goto restart; 2100 } 2101 2102 /* Bootstrap uCode has loaded initialize uCode ... verify inst image. 2103 * This is a paranoid check, because we would not have gotten the 2104 * "initialize" alive if code weren't properly loaded. */ 2105 if (il3945_verify_ucode(il)) { 2106 /* Runtime instruction load was bad; 2107 * take it all the way back down so we can try again */ 2108 D_INFO("Bad \"initialize\" uCode load.\n"); 2109 goto restart; 2110 } 2111 2112 /* Send pointers to protocol/runtime uCode image ... init code will 2113 * load and launch runtime uCode, which will send us another "Alive" 2114 * notification. */ 2115 D_INFO("Initialization Alive received.\n"); 2116 if (il3945_set_ucode_ptrs(il)) { 2117 /* Runtime instruction load won't happen; 2118 * take it all the way back down so we can try again */ 2119 D_INFO("Couldn't set up uCode pointers.\n"); 2120 goto restart; 2121 } 2122 return; 2123 2124 restart: 2125 queue_work(il->workqueue, &il->restart); 2126 } 2127 2128 /** 2129 * il3945_alive_start - called after N_ALIVE notification received 2130 * from protocol/runtime uCode (initialization uCode's 2131 * Alive gets handled by il3945_init_alive_start()). 2132 */ 2133 static void 2134 il3945_alive_start(struct il_priv *il) 2135 { 2136 int thermal_spin = 0; 2137 u32 rfkill; 2138 2139 D_INFO("Runtime Alive received.\n"); 2140 2141 if (il->card_alive.is_valid != UCODE_VALID_OK) { 2142 /* We had an error bringing up the hardware, so take it 2143 * all the way back down so we can try again */ 2144 D_INFO("Alive failed.\n"); 2145 goto restart; 2146 } 2147 2148 /* Initialize uCode has loaded Runtime uCode ... verify inst image. 2149 * This is a paranoid check, because we would not have gotten the 2150 * "runtime" alive if code weren't properly loaded. */ 2151 if (il3945_verify_ucode(il)) { 2152 /* Runtime instruction load was bad; 2153 * take it all the way back down so we can try again */ 2154 D_INFO("Bad runtime uCode load.\n"); 2155 goto restart; 2156 } 2157 2158 rfkill = il_rd_prph(il, APMG_RFKILL_REG); 2159 D_INFO("RFKILL status: 0x%x\n", rfkill); 2160 2161 if (rfkill & 0x1) { 2162 clear_bit(S_RFKILL, &il->status); 2163 /* if RFKILL is not on, then wait for thermal 2164 * sensor in adapter to kick in */ 2165 while (il3945_hw_get_temperature(il) == 0) { 2166 thermal_spin++; 2167 udelay(10); 2168 } 2169 2170 if (thermal_spin) 2171 D_INFO("Thermal calibration took %dus\n", 2172 thermal_spin * 10); 2173 } else 2174 set_bit(S_RFKILL, &il->status); 2175 2176 /* After the ALIVE response, we can send commands to 3945 uCode */ 2177 set_bit(S_ALIVE, &il->status); 2178 2179 /* Enable watchdog to monitor the driver tx queues */ 2180 il_setup_watchdog(il); 2181 2182 if (il_is_rfkill(il)) 2183 return; 2184 2185 ieee80211_wake_queues(il->hw); 2186 2187 il->active_rate = RATES_MASK_3945; 2188 2189 il_power_update_mode(il, true); 2190 2191 if (il_is_associated(il)) { 2192 struct il3945_rxon_cmd *active_rxon = 2193 (struct il3945_rxon_cmd *)(&il->active); 2194 2195 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; 2196 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; 2197 } else { 2198 /* Initialize our rx_config data */ 2199 il_connection_init_rx_config(il); 2200 } 2201 2202 /* Configure Bluetooth device coexistence support */ 2203 il_send_bt_config(il); 2204 2205 set_bit(S_READY, &il->status); 2206 2207 /* Configure the adapter for unassociated operation */ 2208 il3945_commit_rxon(il); 2209 2210 il3945_reg_txpower_periodic(il); 2211 2212 D_INFO("ALIVE processing complete.\n"); 2213 wake_up(&il->wait_command_queue); 2214 2215 return; 2216 2217 restart: 2218 queue_work(il->workqueue, &il->restart); 2219 } 2220 2221 static void il3945_cancel_deferred_work(struct il_priv *il); 2222 2223 static void 2224 __il3945_down(struct il_priv *il) 2225 { 2226 unsigned long flags; 2227 int exit_pending; 2228 2229 D_INFO(DRV_NAME " is going down\n"); 2230 2231 il_scan_cancel_timeout(il, 200); 2232 2233 exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status); 2234 2235 /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set 2236 * to prevent rearm timer */ 2237 del_timer_sync(&il->watchdog); 2238 2239 /* Station information will now be cleared in device */ 2240 il_clear_ucode_stations(il); 2241 il_dealloc_bcast_stations(il); 2242 il_clear_driver_stations(il); 2243 2244 /* Unblock any waiting calls */ 2245 wake_up_all(&il->wait_command_queue); 2246 2247 /* Wipe out the EXIT_PENDING status bit if we are not actually 2248 * exiting the module */ 2249 if (!exit_pending) 2250 clear_bit(S_EXIT_PENDING, &il->status); 2251 2252 /* stop and reset the on-board processor */ 2253 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); 2254 2255 /* tell the device to stop sending interrupts */ 2256 spin_lock_irqsave(&il->lock, flags); 2257 il_disable_interrupts(il); 2258 spin_unlock_irqrestore(&il->lock, flags); 2259 il3945_synchronize_irq(il); 2260 2261 if (il->mac80211_registered) 2262 ieee80211_stop_queues(il->hw); 2263 2264 /* If we have not previously called il3945_init() then 2265 * clear all bits but the RF Kill bits and return */ 2266 if (!il_is_init(il)) { 2267 il->status = 2268 test_bit(S_RFKILL, &il->status) << S_RFKILL | 2269 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | 2270 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; 2271 goto exit; 2272 } 2273 2274 /* ...otherwise clear out all the status bits but the RF Kill 2275 * bit and continue taking the NIC down. */ 2276 il->status &= 2277 test_bit(S_RFKILL, &il->status) << S_RFKILL | 2278 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | 2279 test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR | 2280 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; 2281 2282 /* 2283 * We disabled and synchronized interrupt, and priv->mutex is taken, so 2284 * here is the only thread which will program device registers, but 2285 * still have lockdep assertions, so we are taking reg_lock. 2286 */ 2287 spin_lock_irq(&il->reg_lock); 2288 /* FIXME: il_grab_nic_access if rfkill is off ? */ 2289 2290 il3945_hw_txq_ctx_stop(il); 2291 il3945_hw_rxq_stop(il); 2292 /* Power-down device's busmaster DMA clocks */ 2293 _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); 2294 udelay(5); 2295 /* Stop the device, and put it in low power state */ 2296 _il_apm_stop(il); 2297 2298 spin_unlock_irq(&il->reg_lock); 2299 2300 il3945_hw_txq_ctx_free(il); 2301 exit: 2302 memset(&il->card_alive, 0, sizeof(struct il_alive_resp)); 2303 dev_kfree_skb(il->beacon_skb); 2304 il->beacon_skb = NULL; 2305 2306 /* clear out any free frames */ 2307 il3945_clear_free_frames(il); 2308 } 2309 2310 static void 2311 il3945_down(struct il_priv *il) 2312 { 2313 mutex_lock(&il->mutex); 2314 __il3945_down(il); 2315 mutex_unlock(&il->mutex); 2316 2317 il3945_cancel_deferred_work(il); 2318 } 2319 2320 #define MAX_HW_RESTARTS 5 2321 2322 static int 2323 il3945_alloc_bcast_station(struct il_priv *il) 2324 { 2325 unsigned long flags; 2326 u8 sta_id; 2327 2328 spin_lock_irqsave(&il->sta_lock, flags); 2329 sta_id = il_prep_station(il, il_bcast_addr, false, NULL); 2330 if (sta_id == IL_INVALID_STATION) { 2331 IL_ERR("Unable to prepare broadcast station\n"); 2332 spin_unlock_irqrestore(&il->sta_lock, flags); 2333 2334 return -EINVAL; 2335 } 2336 2337 il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE; 2338 il->stations[sta_id].used |= IL_STA_BCAST; 2339 spin_unlock_irqrestore(&il->sta_lock, flags); 2340 2341 return 0; 2342 } 2343 2344 static int 2345 __il3945_up(struct il_priv *il) 2346 { 2347 int rc, i; 2348 2349 rc = il3945_alloc_bcast_station(il); 2350 if (rc) 2351 return rc; 2352 2353 if (test_bit(S_EXIT_PENDING, &il->status)) { 2354 IL_WARN("Exit pending; will not bring the NIC up\n"); 2355 return -EIO; 2356 } 2357 2358 if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) { 2359 IL_ERR("ucode not available for device bring up\n"); 2360 return -EIO; 2361 } 2362 2363 /* If platform's RF_KILL switch is NOT set to KILL */ 2364 if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) 2365 clear_bit(S_RFKILL, &il->status); 2366 else { 2367 set_bit(S_RFKILL, &il->status); 2368 return -ERFKILL; 2369 } 2370 2371 _il_wr(il, CSR_INT, 0xFFFFFFFF); 2372 2373 rc = il3945_hw_nic_init(il); 2374 if (rc) { 2375 IL_ERR("Unable to int nic\n"); 2376 return rc; 2377 } 2378 2379 /* make sure rfkill handshake bits are cleared */ 2380 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 2381 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); 2382 2383 /* clear (again), then enable host interrupts */ 2384 _il_wr(il, CSR_INT, 0xFFFFFFFF); 2385 il_enable_interrupts(il); 2386 2387 /* really make sure rfkill handshake bits are cleared */ 2388 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 2389 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); 2390 2391 /* Copy original ucode data image from disk into backup cache. 2392 * This will be used to initialize the on-board processor's 2393 * data SRAM for a clean start when the runtime program first loads. */ 2394 memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr, 2395 il->ucode_data.len); 2396 2397 /* We return success when we resume from suspend and rf_kill is on. */ 2398 if (test_bit(S_RFKILL, &il->status)) 2399 return 0; 2400 2401 for (i = 0; i < MAX_HW_RESTARTS; i++) { 2402 2403 /* load bootstrap state machine, 2404 * load bootstrap program into processor's memory, 2405 * prepare to load the "initialize" uCode */ 2406 rc = il->ops->load_ucode(il); 2407 2408 if (rc) { 2409 IL_ERR("Unable to set up bootstrap uCode: %d\n", rc); 2410 continue; 2411 } 2412 2413 /* start card; "initialize" will load runtime ucode */ 2414 il3945_nic_start(il); 2415 2416 D_INFO(DRV_NAME " is coming up\n"); 2417 2418 return 0; 2419 } 2420 2421 set_bit(S_EXIT_PENDING, &il->status); 2422 __il3945_down(il); 2423 clear_bit(S_EXIT_PENDING, &il->status); 2424 2425 /* tried to restart and config the device for as long as our 2426 * patience could withstand */ 2427 IL_ERR("Unable to initialize device after %d attempts.\n", i); 2428 return -EIO; 2429 } 2430 2431 /***************************************************************************** 2432 * 2433 * Workqueue callbacks 2434 * 2435 *****************************************************************************/ 2436 2437 static void 2438 il3945_bg_init_alive_start(struct work_struct *data) 2439 { 2440 struct il_priv *il = 2441 container_of(data, struct il_priv, init_alive_start.work); 2442 2443 mutex_lock(&il->mutex); 2444 if (test_bit(S_EXIT_PENDING, &il->status)) 2445 goto out; 2446 2447 il3945_init_alive_start(il); 2448 out: 2449 mutex_unlock(&il->mutex); 2450 } 2451 2452 static void 2453 il3945_bg_alive_start(struct work_struct *data) 2454 { 2455 struct il_priv *il = 2456 container_of(data, struct il_priv, alive_start.work); 2457 2458 mutex_lock(&il->mutex); 2459 if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL) 2460 goto out; 2461 2462 il3945_alive_start(il); 2463 out: 2464 mutex_unlock(&il->mutex); 2465 } 2466 2467 /* 2468 * 3945 cannot interrupt driver when hardware rf kill switch toggles; 2469 * driver must poll CSR_GP_CNTRL_REG register for change. This register 2470 * *is* readable even when device has been SW_RESET into low power mode 2471 * (e.g. during RF KILL). 2472 */ 2473 static void 2474 il3945_rfkill_poll(struct work_struct *data) 2475 { 2476 struct il_priv *il = 2477 container_of(data, struct il_priv, _3945.rfkill_poll.work); 2478 bool old_rfkill = test_bit(S_RFKILL, &il->status); 2479 bool new_rfkill = 2480 !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); 2481 2482 if (new_rfkill != old_rfkill) { 2483 if (new_rfkill) 2484 set_bit(S_RFKILL, &il->status); 2485 else 2486 clear_bit(S_RFKILL, &il->status); 2487 2488 wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill); 2489 2490 D_RF_KILL("RF_KILL bit toggled to %s.\n", 2491 new_rfkill ? "disable radio" : "enable radio"); 2492 } 2493 2494 /* Keep this running, even if radio now enabled. This will be 2495 * cancelled in mac_start() if system decides to start again */ 2496 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2497 round_jiffies_relative(2 * HZ)); 2498 2499 } 2500 2501 int 2502 il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif) 2503 { 2504 struct il_host_cmd cmd = { 2505 .id = C_SCAN, 2506 .len = sizeof(struct il3945_scan_cmd), 2507 .flags = CMD_SIZE_HUGE, 2508 }; 2509 struct il3945_scan_cmd *scan; 2510 u8 n_probes = 0; 2511 enum nl80211_band band; 2512 bool is_active = false; 2513 int ret; 2514 u16 len; 2515 2516 lockdep_assert_held(&il->mutex); 2517 2518 if (!il->scan_cmd) { 2519 il->scan_cmd = 2520 kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE, 2521 GFP_KERNEL); 2522 if (!il->scan_cmd) { 2523 D_SCAN("Fail to allocate scan memory\n"); 2524 return -ENOMEM; 2525 } 2526 } 2527 scan = il->scan_cmd; 2528 memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE); 2529 2530 scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH; 2531 scan->quiet_time = IL_ACTIVE_QUIET_TIME; 2532 2533 if (il_is_associated(il)) { 2534 u16 interval; 2535 u32 extra; 2536 u32 suspend_time = 100; 2537 u32 scan_suspend_time = 100; 2538 2539 D_INFO("Scanning while associated...\n"); 2540 2541 interval = vif->bss_conf.beacon_int; 2542 2543 scan->suspend_time = 0; 2544 scan->max_out_time = cpu_to_le32(200 * 1024); 2545 if (!interval) 2546 interval = suspend_time; 2547 /* 2548 * suspend time format: 2549 * 0-19: beacon interval in usec (time before exec.) 2550 * 20-23: 0 2551 * 24-31: number of beacons (suspend between channels) 2552 */ 2553 2554 extra = (suspend_time / interval) << 24; 2555 scan_suspend_time = 2556 0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024)); 2557 2558 scan->suspend_time = cpu_to_le32(scan_suspend_time); 2559 D_SCAN("suspend_time 0x%X beacon interval %d\n", 2560 scan_suspend_time, interval); 2561 } 2562 2563 if (il->scan_request->n_ssids) { 2564 int i, p = 0; 2565 D_SCAN("Kicking off active scan\n"); 2566 for (i = 0; i < il->scan_request->n_ssids; i++) { 2567 /* always does wildcard anyway */ 2568 if (!il->scan_request->ssids[i].ssid_len) 2569 continue; 2570 scan->direct_scan[p].id = WLAN_EID_SSID; 2571 scan->direct_scan[p].len = 2572 il->scan_request->ssids[i].ssid_len; 2573 memcpy(scan->direct_scan[p].ssid, 2574 il->scan_request->ssids[i].ssid, 2575 il->scan_request->ssids[i].ssid_len); 2576 n_probes++; 2577 p++; 2578 } 2579 is_active = true; 2580 } else 2581 D_SCAN("Kicking off passive scan.\n"); 2582 2583 /* We don't build a direct scan probe request; the uCode will do 2584 * that based on the direct_mask added to each channel entry */ 2585 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; 2586 scan->tx_cmd.sta_id = il->hw_params.bcast_id; 2587 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; 2588 2589 /* flags + rate selection */ 2590 2591 switch (il->scan_band) { 2592 case NL80211_BAND_2GHZ: 2593 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; 2594 scan->tx_cmd.rate = RATE_1M_PLCP; 2595 band = NL80211_BAND_2GHZ; 2596 break; 2597 case NL80211_BAND_5GHZ: 2598 scan->tx_cmd.rate = RATE_6M_PLCP; 2599 band = NL80211_BAND_5GHZ; 2600 break; 2601 default: 2602 IL_WARN("Invalid scan band\n"); 2603 return -EIO; 2604 } 2605 2606 /* 2607 * If active scaning is requested but a certain channel is marked 2608 * passive, we can do active scanning if we detect transmissions. For 2609 * passive only scanning disable switching to active on any channel. 2610 */ 2611 scan->good_CRC_th = 2612 is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER; 2613 2614 len = 2615 il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data, 2616 vif->addr, il->scan_request->ie, 2617 il->scan_request->ie_len, 2618 IL_MAX_SCAN_SIZE - sizeof(*scan)); 2619 scan->tx_cmd.len = cpu_to_le16(len); 2620 2621 /* select Rx antennas */ 2622 scan->flags |= il3945_get_antenna_flags(il); 2623 2624 scan->channel_count = 2625 il3945_get_channels_for_scan(il, band, is_active, n_probes, 2626 (void *)&scan->data[len], vif); 2627 if (scan->channel_count == 0) { 2628 D_SCAN("channel count %d\n", scan->channel_count); 2629 return -EIO; 2630 } 2631 2632 cmd.len += 2633 le16_to_cpu(scan->tx_cmd.len) + 2634 scan->channel_count * sizeof(struct il3945_scan_channel); 2635 cmd.data = scan; 2636 scan->len = cpu_to_le16(cmd.len); 2637 2638 set_bit(S_SCAN_HW, &il->status); 2639 ret = il_send_cmd_sync(il, &cmd); 2640 if (ret) 2641 clear_bit(S_SCAN_HW, &il->status); 2642 return ret; 2643 } 2644 2645 void 2646 il3945_post_scan(struct il_priv *il) 2647 { 2648 /* 2649 * Since setting the RXON may have been deferred while 2650 * performing the scan, fire one off if needed 2651 */ 2652 if (memcmp(&il->staging, &il->active, sizeof(il->staging))) 2653 il3945_commit_rxon(il); 2654 } 2655 2656 static void 2657 il3945_bg_restart(struct work_struct *data) 2658 { 2659 struct il_priv *il = container_of(data, struct il_priv, restart); 2660 2661 if (test_bit(S_EXIT_PENDING, &il->status)) 2662 return; 2663 2664 if (test_and_clear_bit(S_FW_ERROR, &il->status)) { 2665 mutex_lock(&il->mutex); 2666 il->is_open = 0; 2667 mutex_unlock(&il->mutex); 2668 il3945_down(il); 2669 ieee80211_restart_hw(il->hw); 2670 } else { 2671 il3945_down(il); 2672 2673 mutex_lock(&il->mutex); 2674 if (test_bit(S_EXIT_PENDING, &il->status)) { 2675 mutex_unlock(&il->mutex); 2676 return; 2677 } 2678 2679 __il3945_up(il); 2680 mutex_unlock(&il->mutex); 2681 } 2682 } 2683 2684 static void 2685 il3945_bg_rx_replenish(struct work_struct *data) 2686 { 2687 struct il_priv *il = container_of(data, struct il_priv, rx_replenish); 2688 2689 mutex_lock(&il->mutex); 2690 if (test_bit(S_EXIT_PENDING, &il->status)) 2691 goto out; 2692 2693 il3945_rx_replenish(il); 2694 out: 2695 mutex_unlock(&il->mutex); 2696 } 2697 2698 void 2699 il3945_post_associate(struct il_priv *il) 2700 { 2701 int rc = 0; 2702 2703 if (!il->vif || !il->is_open) 2704 return; 2705 2706 D_ASSOC("Associated as %d to: %pM\n", il->vif->bss_conf.aid, 2707 il->active.bssid_addr); 2708 2709 if (test_bit(S_EXIT_PENDING, &il->status)) 2710 return; 2711 2712 il_scan_cancel_timeout(il, 200); 2713 2714 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; 2715 il3945_commit_rxon(il); 2716 2717 rc = il_send_rxon_timing(il); 2718 if (rc) 2719 IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n"); 2720 2721 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; 2722 2723 il->staging.assoc_id = cpu_to_le16(il->vif->bss_conf.aid); 2724 2725 D_ASSOC("assoc id %d beacon interval %d\n", il->vif->bss_conf.aid, 2726 il->vif->bss_conf.beacon_int); 2727 2728 if (il->vif->bss_conf.use_short_preamble) 2729 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; 2730 else 2731 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; 2732 2733 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) { 2734 if (il->vif->bss_conf.use_short_slot) 2735 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; 2736 else 2737 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; 2738 } 2739 2740 il3945_commit_rxon(il); 2741 2742 switch (il->vif->type) { 2743 case NL80211_IFTYPE_STATION: 2744 il3945_rate_scale_init(il->hw, IL_AP_ID); 2745 break; 2746 case NL80211_IFTYPE_ADHOC: 2747 il3945_send_beacon_cmd(il); 2748 break; 2749 default: 2750 IL_ERR("%s Should not be called in %d mode\n", __func__, 2751 il->vif->type); 2752 break; 2753 } 2754 } 2755 2756 /***************************************************************************** 2757 * 2758 * mac80211 entry point functions 2759 * 2760 *****************************************************************************/ 2761 2762 #define UCODE_READY_TIMEOUT (2 * HZ) 2763 2764 static int 2765 il3945_mac_start(struct ieee80211_hw *hw) 2766 { 2767 struct il_priv *il = hw->priv; 2768 int ret; 2769 2770 /* we should be verifying the device is ready to be opened */ 2771 mutex_lock(&il->mutex); 2772 D_MAC80211("enter\n"); 2773 2774 /* fetch ucode file from disk, alloc and copy to bus-master buffers ... 2775 * ucode filename and max sizes are card-specific. */ 2776 2777 if (!il->ucode_code.len) { 2778 ret = il3945_read_ucode(il); 2779 if (ret) { 2780 IL_ERR("Could not read microcode: %d\n", ret); 2781 mutex_unlock(&il->mutex); 2782 goto out_release_irq; 2783 } 2784 } 2785 2786 ret = __il3945_up(il); 2787 2788 mutex_unlock(&il->mutex); 2789 2790 if (ret) 2791 goto out_release_irq; 2792 2793 D_INFO("Start UP work.\n"); 2794 2795 /* Wait for START_ALIVE from ucode. Otherwise callbacks from 2796 * mac80211 will not be run successfully. */ 2797 ret = wait_event_timeout(il->wait_command_queue, 2798 test_bit(S_READY, &il->status), 2799 UCODE_READY_TIMEOUT); 2800 if (!ret) { 2801 if (!test_bit(S_READY, &il->status)) { 2802 IL_ERR("Wait for START_ALIVE timeout after %dms.\n", 2803 jiffies_to_msecs(UCODE_READY_TIMEOUT)); 2804 ret = -ETIMEDOUT; 2805 goto out_release_irq; 2806 } 2807 } 2808 2809 /* ucode is running and will send rfkill notifications, 2810 * no need to poll the killswitch state anymore */ 2811 cancel_delayed_work(&il->_3945.rfkill_poll); 2812 2813 il->is_open = 1; 2814 D_MAC80211("leave\n"); 2815 return 0; 2816 2817 out_release_irq: 2818 il->is_open = 0; 2819 D_MAC80211("leave - failed\n"); 2820 return ret; 2821 } 2822 2823 static void 2824 il3945_mac_stop(struct ieee80211_hw *hw) 2825 { 2826 struct il_priv *il = hw->priv; 2827 2828 D_MAC80211("enter\n"); 2829 2830 if (!il->is_open) { 2831 D_MAC80211("leave - skip\n"); 2832 return; 2833 } 2834 2835 il->is_open = 0; 2836 2837 il3945_down(il); 2838 2839 flush_workqueue(il->workqueue); 2840 2841 /* start polling the killswitch state again */ 2842 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2843 round_jiffies_relative(2 * HZ)); 2844 2845 D_MAC80211("leave\n"); 2846 } 2847 2848 static void 2849 il3945_mac_tx(struct ieee80211_hw *hw, 2850 struct ieee80211_tx_control *control, 2851 struct sk_buff *skb) 2852 { 2853 struct il_priv *il = hw->priv; 2854 2855 D_MAC80211("enter\n"); 2856 2857 D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, 2858 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); 2859 2860 if (il3945_tx_skb(il, control->sta, skb)) 2861 dev_kfree_skb_any(skb); 2862 2863 D_MAC80211("leave\n"); 2864 } 2865 2866 void 2867 il3945_config_ap(struct il_priv *il) 2868 { 2869 struct ieee80211_vif *vif = il->vif; 2870 int rc = 0; 2871 2872 if (test_bit(S_EXIT_PENDING, &il->status)) 2873 return; 2874 2875 /* The following should be done only at AP bring up */ 2876 if (!(il_is_associated(il))) { 2877 2878 /* RXON - unassoc (to set timing command) */ 2879 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; 2880 il3945_commit_rxon(il); 2881 2882 /* RXON Timing */ 2883 rc = il_send_rxon_timing(il); 2884 if (rc) 2885 IL_WARN("C_RXON_TIMING failed - " 2886 "Attempting to continue.\n"); 2887 2888 il->staging.assoc_id = 0; 2889 2890 if (vif->bss_conf.use_short_preamble) 2891 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; 2892 else 2893 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; 2894 2895 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) { 2896 if (vif->bss_conf.use_short_slot) 2897 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; 2898 else 2899 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; 2900 } 2901 /* restore RXON assoc */ 2902 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; 2903 il3945_commit_rxon(il); 2904 } 2905 il3945_send_beacon_cmd(il); 2906 } 2907 2908 static int 2909 il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, 2910 struct ieee80211_vif *vif, struct ieee80211_sta *sta, 2911 struct ieee80211_key_conf *key) 2912 { 2913 struct il_priv *il = hw->priv; 2914 int ret = 0; 2915 u8 sta_id = IL_INVALID_STATION; 2916 u8 static_key; 2917 2918 D_MAC80211("enter\n"); 2919 2920 if (il3945_mod_params.sw_crypto) { 2921 D_MAC80211("leave - hwcrypto disabled\n"); 2922 return -EOPNOTSUPP; 2923 } 2924 2925 /* 2926 * To support IBSS RSN, don't program group keys in IBSS, the 2927 * hardware will then not attempt to decrypt the frames. 2928 */ 2929 if (vif->type == NL80211_IFTYPE_ADHOC && 2930 !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { 2931 D_MAC80211("leave - IBSS RSN\n"); 2932 return -EOPNOTSUPP; 2933 } 2934 2935 static_key = !il_is_associated(il); 2936 2937 if (!static_key) { 2938 sta_id = il_sta_id_or_broadcast(il, sta); 2939 if (sta_id == IL_INVALID_STATION) { 2940 D_MAC80211("leave - station not found\n"); 2941 return -EINVAL; 2942 } 2943 } 2944 2945 mutex_lock(&il->mutex); 2946 il_scan_cancel_timeout(il, 100); 2947 2948 switch (cmd) { 2949 case SET_KEY: 2950 if (static_key) 2951 ret = il3945_set_static_key(il, key); 2952 else 2953 ret = il3945_set_dynamic_key(il, key, sta_id); 2954 D_MAC80211("enable hwcrypto key\n"); 2955 break; 2956 case DISABLE_KEY: 2957 if (static_key) 2958 ret = il3945_remove_static_key(il); 2959 else 2960 ret = il3945_clear_sta_key_info(il, sta_id); 2961 D_MAC80211("disable hwcrypto key\n"); 2962 break; 2963 default: 2964 ret = -EINVAL; 2965 } 2966 2967 D_MAC80211("leave ret %d\n", ret); 2968 mutex_unlock(&il->mutex); 2969 2970 return ret; 2971 } 2972 2973 static int 2974 il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 2975 struct ieee80211_sta *sta) 2976 { 2977 struct il_priv *il = hw->priv; 2978 struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv; 2979 int ret; 2980 bool is_ap = vif->type == NL80211_IFTYPE_STATION; 2981 u8 sta_id; 2982 2983 mutex_lock(&il->mutex); 2984 D_INFO("station %pM\n", sta->addr); 2985 sta_priv->common.sta_id = IL_INVALID_STATION; 2986 2987 ret = il_add_station_common(il, sta->addr, is_ap, sta, &sta_id); 2988 if (ret) { 2989 IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret); 2990 /* Should we return success if return code is EEXIST ? */ 2991 mutex_unlock(&il->mutex); 2992 return ret; 2993 } 2994 2995 sta_priv->common.sta_id = sta_id; 2996 2997 /* Initialize rate scaling */ 2998 D_INFO("Initializing rate scaling for station %pM\n", sta->addr); 2999 il3945_rs_rate_init(il, sta, sta_id); 3000 mutex_unlock(&il->mutex); 3001 3002 return 0; 3003 } 3004 3005 static void 3006 il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, 3007 unsigned int *total_flags, u64 multicast) 3008 { 3009 struct il_priv *il = hw->priv; 3010 __le32 filter_or = 0, filter_nand = 0; 3011 3012 #define CHK(test, flag) do { \ 3013 if (*total_flags & (test)) \ 3014 filter_or |= (flag); \ 3015 else \ 3016 filter_nand |= (flag); \ 3017 } while (0) 3018 3019 D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags, 3020 *total_flags); 3021 3022 CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK); 3023 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK); 3024 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); 3025 3026 #undef CHK 3027 3028 mutex_lock(&il->mutex); 3029 3030 il->staging.filter_flags &= ~filter_nand; 3031 il->staging.filter_flags |= filter_or; 3032 3033 /* 3034 * Not committing directly because hardware can perform a scan, 3035 * but even if hw is ready, committing here breaks for some reason, 3036 * we'll eventually commit the filter flags change anyway. 3037 */ 3038 3039 mutex_unlock(&il->mutex); 3040 3041 /* 3042 * Receiving all multicast frames is always enabled by the 3043 * default flags setup in il_connection_init_rx_config() 3044 * since we currently do not support programming multicast 3045 * filters into the device. 3046 */ 3047 *total_flags &= 3048 FIF_OTHER_BSS | FIF_ALLMULTI | 3049 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; 3050 } 3051 3052 /***************************************************************************** 3053 * 3054 * sysfs attributes 3055 * 3056 *****************************************************************************/ 3057 3058 #ifdef CONFIG_IWLEGACY_DEBUG 3059 3060 /* 3061 * The following adds a new attribute to the sysfs representation 3062 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) 3063 * used for controlling the debug level. 3064 * 3065 * See the level definitions in iwl for details. 3066 * 3067 * The debug_level being managed using sysfs below is a per device debug 3068 * level that is used instead of the global debug level if it (the per 3069 * device debug level) is set. 3070 */ 3071 static ssize_t 3072 il3945_show_debug_level(struct device *d, struct device_attribute *attr, 3073 char *buf) 3074 { 3075 struct il_priv *il = dev_get_drvdata(d); 3076 return sprintf(buf, "0x%08X\n", il_get_debug_level(il)); 3077 } 3078 3079 static ssize_t 3080 il3945_store_debug_level(struct device *d, struct device_attribute *attr, 3081 const char *buf, size_t count) 3082 { 3083 struct il_priv *il = dev_get_drvdata(d); 3084 unsigned long val; 3085 int ret; 3086 3087 ret = kstrtoul(buf, 0, &val); 3088 if (ret) 3089 IL_INFO("%s is not in hex or decimal form.\n", buf); 3090 else 3091 il->debug_level = val; 3092 3093 return strnlen(buf, count); 3094 } 3095 3096 static DEVICE_ATTR(debug_level, 0644, il3945_show_debug_level, 3097 il3945_store_debug_level); 3098 3099 #endif /* CONFIG_IWLEGACY_DEBUG */ 3100 3101 static ssize_t 3102 il3945_show_temperature(struct device *d, struct device_attribute *attr, 3103 char *buf) 3104 { 3105 struct il_priv *il = dev_get_drvdata(d); 3106 3107 if (!il_is_alive(il)) 3108 return -EAGAIN; 3109 3110 return sprintf(buf, "%d\n", il3945_hw_get_temperature(il)); 3111 } 3112 3113 static DEVICE_ATTR(temperature, 0444, il3945_show_temperature, NULL); 3114 3115 static ssize_t 3116 il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf) 3117 { 3118 struct il_priv *il = dev_get_drvdata(d); 3119 return sprintf(buf, "%d\n", il->tx_power_user_lmt); 3120 } 3121 3122 static ssize_t 3123 il3945_store_tx_power(struct device *d, struct device_attribute *attr, 3124 const char *buf, size_t count) 3125 { 3126 struct il_priv *il = dev_get_drvdata(d); 3127 char *p = (char *)buf; 3128 u32 val; 3129 3130 val = simple_strtoul(p, &p, 10); 3131 if (p == buf) 3132 IL_INFO(": %s is not in decimal form.\n", buf); 3133 else 3134 il3945_hw_reg_set_txpower(il, val); 3135 3136 return count; 3137 } 3138 3139 static DEVICE_ATTR(tx_power, 0644, il3945_show_tx_power, il3945_store_tx_power); 3140 3141 static ssize_t 3142 il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf) 3143 { 3144 struct il_priv *il = dev_get_drvdata(d); 3145 3146 return sprintf(buf, "0x%04X\n", il->active.flags); 3147 } 3148 3149 static ssize_t 3150 il3945_store_flags(struct device *d, struct device_attribute *attr, 3151 const char *buf, size_t count) 3152 { 3153 struct il_priv *il = dev_get_drvdata(d); 3154 u32 flags = simple_strtoul(buf, NULL, 0); 3155 3156 mutex_lock(&il->mutex); 3157 if (le32_to_cpu(il->staging.flags) != flags) { 3158 /* Cancel any currently running scans... */ 3159 if (il_scan_cancel_timeout(il, 100)) 3160 IL_WARN("Could not cancel scan.\n"); 3161 else { 3162 D_INFO("Committing rxon.flags = 0x%04X\n", flags); 3163 il->staging.flags = cpu_to_le32(flags); 3164 il3945_commit_rxon(il); 3165 } 3166 } 3167 mutex_unlock(&il->mutex); 3168 3169 return count; 3170 } 3171 3172 static DEVICE_ATTR(flags, 0644, il3945_show_flags, il3945_store_flags); 3173 3174 static ssize_t 3175 il3945_show_filter_flags(struct device *d, struct device_attribute *attr, 3176 char *buf) 3177 { 3178 struct il_priv *il = dev_get_drvdata(d); 3179 3180 return sprintf(buf, "0x%04X\n", le32_to_cpu(il->active.filter_flags)); 3181 } 3182 3183 static ssize_t 3184 il3945_store_filter_flags(struct device *d, struct device_attribute *attr, 3185 const char *buf, size_t count) 3186 { 3187 struct il_priv *il = dev_get_drvdata(d); 3188 u32 filter_flags = simple_strtoul(buf, NULL, 0); 3189 3190 mutex_lock(&il->mutex); 3191 if (le32_to_cpu(il->staging.filter_flags) != filter_flags) { 3192 /* Cancel any currently running scans... */ 3193 if (il_scan_cancel_timeout(il, 100)) 3194 IL_WARN("Could not cancel scan.\n"); 3195 else { 3196 D_INFO("Committing rxon.filter_flags = " "0x%04X\n", 3197 filter_flags); 3198 il->staging.filter_flags = cpu_to_le32(filter_flags); 3199 il3945_commit_rxon(il); 3200 } 3201 } 3202 mutex_unlock(&il->mutex); 3203 3204 return count; 3205 } 3206 3207 static DEVICE_ATTR(filter_flags, 0644, il3945_show_filter_flags, 3208 il3945_store_filter_flags); 3209 3210 static ssize_t 3211 il3945_show_measurement(struct device *d, struct device_attribute *attr, 3212 char *buf) 3213 { 3214 struct il_priv *il = dev_get_drvdata(d); 3215 struct il_spectrum_notification measure_report; 3216 u32 size = sizeof(measure_report), len = 0, ofs = 0; 3217 u8 *data = (u8 *) &measure_report; 3218 unsigned long flags; 3219 3220 spin_lock_irqsave(&il->lock, flags); 3221 if (!(il->measurement_status & MEASUREMENT_READY)) { 3222 spin_unlock_irqrestore(&il->lock, flags); 3223 return 0; 3224 } 3225 memcpy(&measure_report, &il->measure_report, size); 3226 il->measurement_status = 0; 3227 spin_unlock_irqrestore(&il->lock, flags); 3228 3229 while (size && PAGE_SIZE - len) { 3230 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, 3231 PAGE_SIZE - len, true); 3232 len = strlen(buf); 3233 if (PAGE_SIZE - len) 3234 buf[len++] = '\n'; 3235 3236 ofs += 16; 3237 size -= min(size, 16U); 3238 } 3239 3240 return len; 3241 } 3242 3243 static ssize_t 3244 il3945_store_measurement(struct device *d, struct device_attribute *attr, 3245 const char *buf, size_t count) 3246 { 3247 struct il_priv *il = dev_get_drvdata(d); 3248 struct ieee80211_measurement_params params = { 3249 .channel = le16_to_cpu(il->active.channel), 3250 .start_time = cpu_to_le64(il->_3945.last_tsf), 3251 .duration = cpu_to_le16(1), 3252 }; 3253 u8 type = IL_MEASURE_BASIC; 3254 u8 buffer[32]; 3255 u8 channel; 3256 3257 if (count) { 3258 char *p = buffer; 3259 strlcpy(buffer, buf, sizeof(buffer)); 3260 channel = simple_strtoul(p, NULL, 0); 3261 if (channel) 3262 params.channel = channel; 3263 3264 p = buffer; 3265 while (*p && *p != ' ') 3266 p++; 3267 if (*p) 3268 type = simple_strtoul(p + 1, NULL, 0); 3269 } 3270 3271 D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n", 3272 type, params.channel, buf); 3273 il3945_get_measurement(il, ¶ms, type); 3274 3275 return count; 3276 } 3277 3278 static DEVICE_ATTR(measurement, 0600, il3945_show_measurement, 3279 il3945_store_measurement); 3280 3281 static ssize_t 3282 il3945_store_retry_rate(struct device *d, struct device_attribute *attr, 3283 const char *buf, size_t count) 3284 { 3285 struct il_priv *il = dev_get_drvdata(d); 3286 3287 il->retry_rate = simple_strtoul(buf, NULL, 0); 3288 if (il->retry_rate <= 0) 3289 il->retry_rate = 1; 3290 3291 return count; 3292 } 3293 3294 static ssize_t 3295 il3945_show_retry_rate(struct device *d, struct device_attribute *attr, 3296 char *buf) 3297 { 3298 struct il_priv *il = dev_get_drvdata(d); 3299 return sprintf(buf, "%d", il->retry_rate); 3300 } 3301 3302 static DEVICE_ATTR(retry_rate, 0600, il3945_show_retry_rate, 3303 il3945_store_retry_rate); 3304 3305 static ssize_t 3306 il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf) 3307 { 3308 /* all this shit doesn't belong into sysfs anyway */ 3309 return 0; 3310 } 3311 3312 static DEVICE_ATTR(channels, 0400, il3945_show_channels, NULL); 3313 3314 static ssize_t 3315 il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf) 3316 { 3317 struct il_priv *il = dev_get_drvdata(d); 3318 3319 if (!il_is_alive(il)) 3320 return -EAGAIN; 3321 3322 return sprintf(buf, "%d\n", il3945_mod_params.antenna); 3323 } 3324 3325 static ssize_t 3326 il3945_store_antenna(struct device *d, struct device_attribute *attr, 3327 const char *buf, size_t count) 3328 { 3329 struct il_priv *il __maybe_unused = dev_get_drvdata(d); 3330 int ant; 3331 3332 if (count == 0) 3333 return 0; 3334 3335 if (sscanf(buf, "%1i", &ant) != 1) { 3336 D_INFO("not in hex or decimal form.\n"); 3337 return count; 3338 } 3339 3340 if (ant >= 0 && ant <= 2) { 3341 D_INFO("Setting antenna select to %d.\n", ant); 3342 il3945_mod_params.antenna = (enum il3945_antenna)ant; 3343 } else 3344 D_INFO("Bad antenna select value %d.\n", ant); 3345 3346 return count; 3347 } 3348 3349 static DEVICE_ATTR(antenna, 0644, il3945_show_antenna, il3945_store_antenna); 3350 3351 static ssize_t 3352 il3945_show_status(struct device *d, struct device_attribute *attr, char *buf) 3353 { 3354 struct il_priv *il = dev_get_drvdata(d); 3355 if (!il_is_alive(il)) 3356 return -EAGAIN; 3357 return sprintf(buf, "0x%08x\n", (int)il->status); 3358 } 3359 3360 static DEVICE_ATTR(status, 0444, il3945_show_status, NULL); 3361 3362 static ssize_t 3363 il3945_dump_error_log(struct device *d, struct device_attribute *attr, 3364 const char *buf, size_t count) 3365 { 3366 struct il_priv *il = dev_get_drvdata(d); 3367 char *p = (char *)buf; 3368 3369 if (p[0] == '1') 3370 il3945_dump_nic_error_log(il); 3371 3372 return strnlen(buf, count); 3373 } 3374 3375 static DEVICE_ATTR(dump_errors, 0200, NULL, il3945_dump_error_log); 3376 3377 /***************************************************************************** 3378 * 3379 * driver setup and tear down 3380 * 3381 *****************************************************************************/ 3382 3383 static void 3384 il3945_setup_deferred_work(struct il_priv *il) 3385 { 3386 il->workqueue = create_singlethread_workqueue(DRV_NAME); 3387 3388 init_waitqueue_head(&il->wait_command_queue); 3389 3390 INIT_WORK(&il->restart, il3945_bg_restart); 3391 INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish); 3392 INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start); 3393 INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start); 3394 INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll); 3395 3396 il_setup_scan_deferred_work(il); 3397 3398 il3945_hw_setup_deferred_work(il); 3399 3400 timer_setup(&il->watchdog, il_bg_watchdog, 0); 3401 3402 tasklet_init(&il->irq_tasklet, 3403 il3945_irq_tasklet, 3404 (unsigned long)il); 3405 } 3406 3407 static void 3408 il3945_cancel_deferred_work(struct il_priv *il) 3409 { 3410 il3945_hw_cancel_deferred_work(il); 3411 3412 cancel_delayed_work_sync(&il->init_alive_start); 3413 cancel_delayed_work(&il->alive_start); 3414 3415 il_cancel_scan_deferred_work(il); 3416 } 3417 3418 static struct attribute *il3945_sysfs_entries[] = { 3419 &dev_attr_antenna.attr, 3420 &dev_attr_channels.attr, 3421 &dev_attr_dump_errors.attr, 3422 &dev_attr_flags.attr, 3423 &dev_attr_filter_flags.attr, 3424 &dev_attr_measurement.attr, 3425 &dev_attr_retry_rate.attr, 3426 &dev_attr_status.attr, 3427 &dev_attr_temperature.attr, 3428 &dev_attr_tx_power.attr, 3429 #ifdef CONFIG_IWLEGACY_DEBUG 3430 &dev_attr_debug_level.attr, 3431 #endif 3432 NULL 3433 }; 3434 3435 static const struct attribute_group il3945_attribute_group = { 3436 .name = NULL, /* put in device directory */ 3437 .attrs = il3945_sysfs_entries, 3438 }; 3439 3440 static struct ieee80211_ops il3945_mac_ops __ro_after_init = { 3441 .tx = il3945_mac_tx, 3442 .start = il3945_mac_start, 3443 .stop = il3945_mac_stop, 3444 .add_interface = il_mac_add_interface, 3445 .remove_interface = il_mac_remove_interface, 3446 .change_interface = il_mac_change_interface, 3447 .config = il_mac_config, 3448 .configure_filter = il3945_configure_filter, 3449 .set_key = il3945_mac_set_key, 3450 .conf_tx = il_mac_conf_tx, 3451 .reset_tsf = il_mac_reset_tsf, 3452 .bss_info_changed = il_mac_bss_info_changed, 3453 .hw_scan = il_mac_hw_scan, 3454 .sta_add = il3945_mac_sta_add, 3455 .sta_remove = il_mac_sta_remove, 3456 .tx_last_beacon = il_mac_tx_last_beacon, 3457 .flush = il_mac_flush, 3458 }; 3459 3460 static int 3461 il3945_init_drv(struct il_priv *il) 3462 { 3463 int ret; 3464 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; 3465 3466 il->retry_rate = 1; 3467 il->beacon_skb = NULL; 3468 3469 spin_lock_init(&il->sta_lock); 3470 spin_lock_init(&il->hcmd_lock); 3471 3472 INIT_LIST_HEAD(&il->free_frames); 3473 3474 mutex_init(&il->mutex); 3475 3476 il->ieee_channels = NULL; 3477 il->ieee_rates = NULL; 3478 il->band = NL80211_BAND_2GHZ; 3479 3480 il->iw_mode = NL80211_IFTYPE_STATION; 3481 il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF; 3482 3483 /* initialize force reset */ 3484 il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD; 3485 3486 if (eeprom->version < EEPROM_3945_EEPROM_VERSION) { 3487 IL_WARN("Unsupported EEPROM version: 0x%04X\n", 3488 eeprom->version); 3489 ret = -EINVAL; 3490 goto err; 3491 } 3492 ret = il_init_channel_map(il); 3493 if (ret) { 3494 IL_ERR("initializing regulatory failed: %d\n", ret); 3495 goto err; 3496 } 3497 3498 /* Set up txpower settings in driver for all channels */ 3499 if (il3945_txpower_set_from_eeprom(il)) { 3500 ret = -EIO; 3501 goto err_free_channel_map; 3502 } 3503 3504 ret = il_init_geos(il); 3505 if (ret) { 3506 IL_ERR("initializing geos failed: %d\n", ret); 3507 goto err_free_channel_map; 3508 } 3509 il3945_init_hw_rates(il, il->ieee_rates); 3510 3511 return 0; 3512 3513 err_free_channel_map: 3514 il_free_channel_map(il); 3515 err: 3516 return ret; 3517 } 3518 3519 #define IL3945_MAX_PROBE_REQUEST 200 3520 3521 static int 3522 il3945_setup_mac(struct il_priv *il) 3523 { 3524 int ret; 3525 struct ieee80211_hw *hw = il->hw; 3526 3527 hw->rate_control_algorithm = "iwl-3945-rs"; 3528 hw->sta_data_size = sizeof(struct il3945_sta_priv); 3529 hw->vif_data_size = sizeof(struct il_vif_priv); 3530 3531 /* Tell mac80211 our characteristics */ 3532 ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS); 3533 ieee80211_hw_set(hw, SUPPORTS_PS); 3534 ieee80211_hw_set(hw, SIGNAL_DBM); 3535 ieee80211_hw_set(hw, SPECTRUM_MGMT); 3536 3537 hw->wiphy->interface_modes = 3538 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); 3539 3540 hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; 3541 hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | 3542 REGULATORY_DISABLE_BEACON_HINTS; 3543 3544 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; 3545 3546 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945; 3547 /* we create the 802.11 header and a zero-length SSID element */ 3548 hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2; 3549 3550 /* Default value; 4 EDCA QOS priorities */ 3551 hw->queues = 4; 3552 3553 if (il->bands[NL80211_BAND_2GHZ].n_channels) 3554 il->hw->wiphy->bands[NL80211_BAND_2GHZ] = 3555 &il->bands[NL80211_BAND_2GHZ]; 3556 3557 if (il->bands[NL80211_BAND_5GHZ].n_channels) 3558 il->hw->wiphy->bands[NL80211_BAND_5GHZ] = 3559 &il->bands[NL80211_BAND_5GHZ]; 3560 3561 il_leds_init(il); 3562 3563 wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); 3564 3565 ret = ieee80211_register_hw(il->hw); 3566 if (ret) { 3567 IL_ERR("Failed to register hw (error %d)\n", ret); 3568 return ret; 3569 } 3570 il->mac80211_registered = 1; 3571 3572 return 0; 3573 } 3574 3575 static int 3576 il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 3577 { 3578 int err = 0; 3579 struct il_priv *il; 3580 struct ieee80211_hw *hw; 3581 struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data); 3582 struct il3945_eeprom *eeprom; 3583 unsigned long flags; 3584 3585 /*********************** 3586 * 1. Allocating HW data 3587 * ********************/ 3588 3589 hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il3945_mac_ops); 3590 if (!hw) { 3591 err = -ENOMEM; 3592 goto out; 3593 } 3594 il = hw->priv; 3595 il->hw = hw; 3596 SET_IEEE80211_DEV(hw, &pdev->dev); 3597 3598 il->cmd_queue = IL39_CMD_QUEUE_NUM; 3599 3600 D_INFO("*** LOAD DRIVER ***\n"); 3601 il->cfg = cfg; 3602 il->ops = &il3945_ops; 3603 #ifdef CONFIG_IWLEGACY_DEBUGFS 3604 il->debugfs_ops = &il3945_debugfs_ops; 3605 #endif 3606 il->pci_dev = pdev; 3607 il->inta_mask = CSR_INI_SET_MASK; 3608 3609 /*************************** 3610 * 2. Initializing PCI bus 3611 * *************************/ 3612 pci_disable_link_state(pdev, 3613 PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | 3614 PCIE_LINK_STATE_CLKPM); 3615 3616 if (pci_enable_device(pdev)) { 3617 err = -ENODEV; 3618 goto out_ieee80211_free_hw; 3619 } 3620 3621 pci_set_master(pdev); 3622 3623 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); 3624 if (!err) 3625 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); 3626 if (err) { 3627 IL_WARN("No suitable DMA available.\n"); 3628 goto out_pci_disable_device; 3629 } 3630 3631 pci_set_drvdata(pdev, il); 3632 err = pci_request_regions(pdev, DRV_NAME); 3633 if (err) 3634 goto out_pci_disable_device; 3635 3636 /*********************** 3637 * 3. Read REV Register 3638 * ********************/ 3639 il->hw_base = pci_ioremap_bar(pdev, 0); 3640 if (!il->hw_base) { 3641 err = -ENODEV; 3642 goto out_pci_release_regions; 3643 } 3644 3645 D_INFO("pci_resource_len = 0x%08llx\n", 3646 (unsigned long long)pci_resource_len(pdev, 0)); 3647 D_INFO("pci_resource_base = %p\n", il->hw_base); 3648 3649 /* We disable the RETRY_TIMEOUT register (0x41) to keep 3650 * PCI Tx retries from interfering with C3 CPU state */ 3651 pci_write_config_byte(pdev, 0x41, 0x00); 3652 3653 /* these spin locks will be used in apm_init and EEPROM access 3654 * we should init now 3655 */ 3656 spin_lock_init(&il->reg_lock); 3657 spin_lock_init(&il->lock); 3658 3659 /* 3660 * stop and reset the on-board processor just in case it is in a 3661 * strange state ... like being left stranded by a primary kernel 3662 * and this is now the kdump kernel trying to start up 3663 */ 3664 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); 3665 3666 /*********************** 3667 * 4. Read EEPROM 3668 * ********************/ 3669 3670 /* Read the EEPROM */ 3671 err = il_eeprom_init(il); 3672 if (err) { 3673 IL_ERR("Unable to init EEPROM\n"); 3674 goto out_iounmap; 3675 } 3676 /* MAC Address location in EEPROM same for 3945/4965 */ 3677 eeprom = (struct il3945_eeprom *)il->eeprom; 3678 D_INFO("MAC address: %pM\n", eeprom->mac_address); 3679 SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address); 3680 3681 /*********************** 3682 * 5. Setup HW Constants 3683 * ********************/ 3684 /* Device-specific setup */ 3685 err = il3945_hw_set_hw_params(il); 3686 if (err) { 3687 IL_ERR("failed to set hw settings\n"); 3688 goto out_eeprom_free; 3689 } 3690 3691 /*********************** 3692 * 6. Setup il 3693 * ********************/ 3694 3695 err = il3945_init_drv(il); 3696 if (err) { 3697 IL_ERR("initializing driver failed\n"); 3698 goto out_unset_hw_params; 3699 } 3700 3701 IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name); 3702 3703 /*********************** 3704 * 7. Setup Services 3705 * ********************/ 3706 3707 spin_lock_irqsave(&il->lock, flags); 3708 il_disable_interrupts(il); 3709 spin_unlock_irqrestore(&il->lock, flags); 3710 3711 pci_enable_msi(il->pci_dev); 3712 3713 err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il); 3714 if (err) { 3715 IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq); 3716 goto out_disable_msi; 3717 } 3718 3719 err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group); 3720 if (err) { 3721 IL_ERR("failed to create sysfs device attributes\n"); 3722 goto out_release_irq; 3723 } 3724 3725 il_set_rxon_channel(il, &il->bands[NL80211_BAND_2GHZ].channels[5]); 3726 il3945_setup_deferred_work(il); 3727 il3945_setup_handlers(il); 3728 il_power_initialize(il); 3729 3730 /********************************* 3731 * 8. Setup and Register mac80211 3732 * *******************************/ 3733 3734 il_enable_interrupts(il); 3735 3736 err = il3945_setup_mac(il); 3737 if (err) 3738 goto out_remove_sysfs; 3739 3740 il_dbgfs_register(il, DRV_NAME); 3741 3742 /* Start monitoring the killswitch */ 3743 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ); 3744 3745 return 0; 3746 3747 out_remove_sysfs: 3748 destroy_workqueue(il->workqueue); 3749 il->workqueue = NULL; 3750 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group); 3751 out_release_irq: 3752 free_irq(il->pci_dev->irq, il); 3753 out_disable_msi: 3754 pci_disable_msi(il->pci_dev); 3755 il_free_geos(il); 3756 il_free_channel_map(il); 3757 out_unset_hw_params: 3758 il3945_unset_hw_params(il); 3759 out_eeprom_free: 3760 il_eeprom_free(il); 3761 out_iounmap: 3762 iounmap(il->hw_base); 3763 out_pci_release_regions: 3764 pci_release_regions(pdev); 3765 out_pci_disable_device: 3766 pci_disable_device(pdev); 3767 out_ieee80211_free_hw: 3768 ieee80211_free_hw(il->hw); 3769 out: 3770 return err; 3771 } 3772 3773 static void 3774 il3945_pci_remove(struct pci_dev *pdev) 3775 { 3776 struct il_priv *il = pci_get_drvdata(pdev); 3777 unsigned long flags; 3778 3779 if (!il) 3780 return; 3781 3782 D_INFO("*** UNLOAD DRIVER ***\n"); 3783 3784 il_dbgfs_unregister(il); 3785 3786 set_bit(S_EXIT_PENDING, &il->status); 3787 3788 il_leds_exit(il); 3789 3790 if (il->mac80211_registered) { 3791 ieee80211_unregister_hw(il->hw); 3792 il->mac80211_registered = 0; 3793 } else { 3794 il3945_down(il); 3795 } 3796 3797 /* 3798 * Make sure device is reset to low power before unloading driver. 3799 * This may be redundant with il_down(), but there are paths to 3800 * run il_down() without calling apm_ops.stop(), and there are 3801 * paths to avoid running il_down() at all before leaving driver. 3802 * This (inexpensive) call *makes sure* device is reset. 3803 */ 3804 il_apm_stop(il); 3805 3806 /* make sure we flush any pending irq or 3807 * tasklet for the driver 3808 */ 3809 spin_lock_irqsave(&il->lock, flags); 3810 il_disable_interrupts(il); 3811 spin_unlock_irqrestore(&il->lock, flags); 3812 3813 il3945_synchronize_irq(il); 3814 3815 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group); 3816 3817 cancel_delayed_work_sync(&il->_3945.rfkill_poll); 3818 3819 il3945_dealloc_ucode_pci(il); 3820 3821 if (il->rxq.bd) 3822 il3945_rx_queue_free(il, &il->rxq); 3823 il3945_hw_txq_ctx_free(il); 3824 3825 il3945_unset_hw_params(il); 3826 3827 /*netif_stop_queue(dev); */ 3828 flush_workqueue(il->workqueue); 3829 3830 /* ieee80211_unregister_hw calls il3945_mac_stop, which flushes 3831 * il->workqueue... so we can't take down the workqueue 3832 * until now... */ 3833 destroy_workqueue(il->workqueue); 3834 il->workqueue = NULL; 3835 3836 free_irq(pdev->irq, il); 3837 pci_disable_msi(pdev); 3838 3839 iounmap(il->hw_base); 3840 pci_release_regions(pdev); 3841 pci_disable_device(pdev); 3842 3843 il_free_channel_map(il); 3844 il_free_geos(il); 3845 kfree(il->scan_cmd); 3846 dev_kfree_skb(il->beacon_skb); 3847 ieee80211_free_hw(il->hw); 3848 } 3849 3850 /***************************************************************************** 3851 * 3852 * driver and module entry point 3853 * 3854 *****************************************************************************/ 3855 3856 static struct pci_driver il3945_driver = { 3857 .name = DRV_NAME, 3858 .id_table = il3945_hw_card_ids, 3859 .probe = il3945_pci_probe, 3860 .remove = il3945_pci_remove, 3861 .driver.pm = IL_LEGACY_PM_OPS, 3862 }; 3863 3864 static int __init 3865 il3945_init(void) 3866 { 3867 3868 int ret; 3869 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); 3870 pr_info(DRV_COPYRIGHT "\n"); 3871 3872 /* 3873 * Disabling hardware scan means that mac80211 will perform scans 3874 * "the hard way", rather than using device's scan. 3875 */ 3876 if (il3945_mod_params.disable_hw_scan) { 3877 pr_info("hw_scan is disabled\n"); 3878 il3945_mac_ops.hw_scan = NULL; 3879 } 3880 3881 ret = il3945_rate_control_register(); 3882 if (ret) { 3883 pr_err("Unable to register rate control algorithm: %d\n", ret); 3884 return ret; 3885 } 3886 3887 ret = pci_register_driver(&il3945_driver); 3888 if (ret) { 3889 pr_err("Unable to initialize PCI module\n"); 3890 goto error_register; 3891 } 3892 3893 return ret; 3894 3895 error_register: 3896 il3945_rate_control_unregister(); 3897 return ret; 3898 } 3899 3900 static void __exit 3901 il3945_exit(void) 3902 { 3903 pci_unregister_driver(&il3945_driver); 3904 il3945_rate_control_unregister(); 3905 } 3906 3907 MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX)); 3908 3909 module_param_named(antenna, il3945_mod_params.antenna, int, 0444); 3910 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); 3911 module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, 0444); 3912 MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])"); 3913 module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int, 3914 0444); 3915 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)"); 3916 #ifdef CONFIG_IWLEGACY_DEBUG 3917 module_param_named(debug, il_debug_level, uint, 0644); 3918 MODULE_PARM_DESC(debug, "debug output mask"); 3919 #endif 3920 module_param_named(fw_restart, il3945_mod_params.restart_fw, int, 0444); 3921 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); 3922 3923 module_exit(il3945_exit); 3924 module_init(il3945_init); 3925