1 /*
2  * Copyright (c) 2010 Broadcom Corporation
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #ifndef	_SBCHIPC_H
18 #define	_SBCHIPC_H
19 
20 #include "defs.h"		/* for PAD macro */
21 
22 #define CHIPCREGOFFS(field)	offsetof(struct chipcregs, field)
23 
24 struct chipcregs {
25 	u32 chipid;		/* 0x0 */
26 	u32 capabilities;
27 	u32 corecontrol;	/* corerev >= 1 */
28 	u32 bist;
29 
30 	/* OTP */
31 	u32 otpstatus;	/* 0x10, corerev >= 10 */
32 	u32 otpcontrol;
33 	u32 otpprog;
34 	u32 otplayout;	/* corerev >= 23 */
35 
36 	/* Interrupt control */
37 	u32 intstatus;	/* 0x20 */
38 	u32 intmask;
39 
40 	/* Chip specific regs */
41 	u32 chipcontrol;	/* 0x28, rev >= 11 */
42 	u32 chipstatus;	/* 0x2c, rev >= 11 */
43 
44 	/* Jtag Master */
45 	u32 jtagcmd;		/* 0x30, rev >= 10 */
46 	u32 jtagir;
47 	u32 jtagdr;
48 	u32 jtagctrl;
49 
50 	/* serial flash interface registers */
51 	u32 flashcontrol;	/* 0x40 */
52 	u32 flashaddress;
53 	u32 flashdata;
54 	u32 PAD[1];
55 
56 	/* Silicon backplane configuration broadcast control */
57 	u32 broadcastaddress;	/* 0x50 */
58 	u32 broadcastdata;
59 
60 	/* gpio - cleared only by power-on-reset */
61 	u32 gpiopullup;	/* 0x58, corerev >= 20 */
62 	u32 gpiopulldown;	/* 0x5c, corerev >= 20 */
63 	u32 gpioin;		/* 0x60 */
64 	u32 gpioout;		/* 0x64 */
65 	u32 gpioouten;	/* 0x68 */
66 	u32 gpiocontrol;	/* 0x6C */
67 	u32 gpiointpolarity;	/* 0x70 */
68 	u32 gpiointmask;	/* 0x74 */
69 
70 	/* GPIO events corerev >= 11 */
71 	u32 gpioevent;
72 	u32 gpioeventintmask;
73 
74 	/* Watchdog timer */
75 	u32 watchdog;	/* 0x80 */
76 
77 	/* GPIO events corerev >= 11 */
78 	u32 gpioeventintpolarity;
79 
80 	/* GPIO based LED powersave registers corerev >= 16 */
81 	u32 gpiotimerval;	/* 0x88 */
82 	u32 gpiotimeroutmask;
83 
84 	/* clock control */
85 	u32 clockcontrol_n;	/* 0x90 */
86 	u32 clockcontrol_sb;	/* aka m0 */
87 	u32 clockcontrol_pci;	/* aka m1 */
88 	u32 clockcontrol_m2;	/* mii/uart/mipsref */
89 	u32 clockcontrol_m3;	/* cpu */
90 	u32 clkdiv;		/* corerev >= 3 */
91 	u32 gpiodebugsel;	/* corerev >= 28 */
92 	u32 capabilities_ext;	/* 0xac  */
93 
94 	/* pll delay registers (corerev >= 4) */
95 	u32 pll_on_delay;	/* 0xb0 */
96 	u32 fref_sel_delay;
97 	u32 slow_clk_ctl;	/* 5 < corerev < 10 */
98 	u32 PAD;
99 
100 	/* Instaclock registers (corerev >= 10) */
101 	u32 system_clk_ctl;	/* 0xc0 */
102 	u32 clkstatestretch;
103 	u32 PAD[2];
104 
105 	/* Indirect backplane access (corerev >= 22) */
106 	u32 bp_addrlow;	/* 0xd0 */
107 	u32 bp_addrhigh;
108 	u32 bp_data;
109 	u32 PAD;
110 	u32 bp_indaccess;
111 	u32 PAD[3];
112 
113 	/* More clock dividers (corerev >= 32) */
114 	u32 clkdiv2;
115 	u32 PAD[2];
116 
117 	/* In AI chips, pointer to erom */
118 	u32 eromptr;		/* 0xfc */
119 
120 	/* ExtBus control registers (corerev >= 3) */
121 	u32 pcmcia_config;	/* 0x100 */
122 	u32 pcmcia_memwait;
123 	u32 pcmcia_attrwait;
124 	u32 pcmcia_iowait;
125 	u32 ide_config;
126 	u32 ide_memwait;
127 	u32 ide_attrwait;
128 	u32 ide_iowait;
129 	u32 prog_config;
130 	u32 prog_waitcount;
131 	u32 flash_config;
132 	u32 flash_waitcount;
133 	u32 SECI_config;	/* 0x130 SECI configuration */
134 	u32 PAD[3];
135 
136 	/* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */
137 	u32 eci_output;	/* 0x140 */
138 	u32 eci_control;
139 	u32 eci_inputlo;
140 	u32 eci_inputmi;
141 	u32 eci_inputhi;
142 	u32 eci_inputintpolaritylo;
143 	u32 eci_inputintpolaritymi;
144 	u32 eci_inputintpolarityhi;
145 	u32 eci_intmasklo;
146 	u32 eci_intmaskmi;
147 	u32 eci_intmaskhi;
148 	u32 eci_eventlo;
149 	u32 eci_eventmi;
150 	u32 eci_eventhi;
151 	u32 eci_eventmasklo;
152 	u32 eci_eventmaskmi;
153 	u32 eci_eventmaskhi;
154 	u32 PAD[3];
155 
156 	/* SROM interface (corerev >= 32) */
157 	u32 sromcontrol;	/* 0x190 */
158 	u32 sromaddress;
159 	u32 sromdata;
160 	u32 PAD[17];
161 
162 	/* Clock control and hardware workarounds (corerev >= 20) */
163 	u32 clk_ctl_st;	/* 0x1e0 */
164 	u32 hw_war;
165 	u32 PAD[70];
166 
167 	/* UARTs */
168 	u8 uart0data;	/* 0x300 */
169 	u8 uart0imr;
170 	u8 uart0fcr;
171 	u8 uart0lcr;
172 	u8 uart0mcr;
173 	u8 uart0lsr;
174 	u8 uart0msr;
175 	u8 uart0scratch;
176 	u8 PAD[248];		/* corerev >= 1 */
177 
178 	u8 uart1data;	/* 0x400 */
179 	u8 uart1imr;
180 	u8 uart1fcr;
181 	u8 uart1lcr;
182 	u8 uart1mcr;
183 	u8 uart1lsr;
184 	u8 uart1msr;
185 	u8 uart1scratch;
186 	u32 PAD[62];
187 
188 	/* save/restore, corerev >= 48 */
189 	u32 sr_capability;          /* 0x500 */
190 	u32 sr_control0;            /* 0x504 */
191 	u32 sr_control1;            /* 0x508 */
192 	u32 gpio_control;           /* 0x50C */
193 	u32 PAD[60];
194 
195 	/* PMU registers (corerev >= 20) */
196 	u32 pmucontrol;	/* 0x600 */
197 	u32 pmucapabilities;
198 	u32 pmustatus;
199 	u32 res_state;
200 	u32 res_pending;
201 	u32 pmutimer;
202 	u32 min_res_mask;
203 	u32 max_res_mask;
204 	u32 res_table_sel;
205 	u32 res_dep_mask;
206 	u32 res_updn_timer;
207 	u32 res_timer;
208 	u32 clkstretch;
209 	u32 pmuwatchdog;
210 	u32 gpiosel;		/* 0x638, rev >= 1 */
211 	u32 gpioenable;	/* 0x63c, rev >= 1 */
212 	u32 res_req_timer_sel;
213 	u32 res_req_timer;
214 	u32 res_req_mask;
215 	u32 pmucapabilities_ext; /* 0x64c, pmurev >=15 */
216 	u32 chipcontrol_addr;	/* 0x650 */
217 	u32 chipcontrol_data;	/* 0x654 */
218 	u32 regcontrol_addr;
219 	u32 regcontrol_data;
220 	u32 pllcontrol_addr;
221 	u32 pllcontrol_data;
222 	u32 pmustrapopt;	/* 0x668, corerev >= 28 */
223 	u32 pmu_xtalfreq;	/* 0x66C, pmurev >= 10 */
224 	u32 retention_ctl;          /* 0x670, pmurev >= 15 */
225 	u32 PAD[3];
226 	u32 retention_grpidx;       /* 0x680 */
227 	u32 retention_grpctl;       /* 0x684 */
228 	u32 PAD[94];
229 	u16 sromotp[768];
230 };
231 
232 /* chipid */
233 #define	CID_ID_MASK		0x0000ffff	/* Chip Id mask */
234 #define	CID_REV_MASK		0x000f0000	/* Chip Revision mask */
235 #define	CID_REV_SHIFT		16	/* Chip Revision shift */
236 #define	CID_PKG_MASK		0x00f00000	/* Package Option mask */
237 #define	CID_PKG_SHIFT		20	/* Package Option shift */
238 #define	CID_CC_MASK		0x0f000000	/* CoreCount (corerev >= 4) */
239 #define CID_CC_SHIFT		24
240 #define	CID_TYPE_MASK		0xf0000000	/* Chip Type */
241 #define CID_TYPE_SHIFT		28
242 
243 /* capabilities */
244 #define	CC_CAP_UARTS_MASK	0x00000003	/* Number of UARTs */
245 #define CC_CAP_MIPSEB		0x00000004	/* MIPS is in big-endian mode */
246 #define CC_CAP_UCLKSEL		0x00000018	/* UARTs clock select */
247 /* UARTs are driven by internal divided clock */
248 #define CC_CAP_UINTCLK		0x00000008
249 #define CC_CAP_UARTGPIO		0x00000020	/* UARTs own GPIOs 15:12 */
250 #define CC_CAP_EXTBUS_MASK	0x000000c0	/* External bus mask */
251 #define CC_CAP_EXTBUS_NONE	0x00000000	/* No ExtBus present */
252 #define CC_CAP_EXTBUS_FULL	0x00000040	/* ExtBus: PCMCIA, IDE & Prog */
253 #define CC_CAP_EXTBUS_PROG	0x00000080	/* ExtBus: ProgIf only */
254 #define	CC_CAP_FLASH_MASK	0x00000700	/* Type of flash */
255 #define	CC_CAP_PLL_MASK		0x00038000	/* Type of PLL */
256 #define CC_CAP_PWR_CTL		0x00040000	/* Power control */
257 #define CC_CAP_OTPSIZE		0x00380000	/* OTP Size (0 = none) */
258 #define CC_CAP_OTPSIZE_SHIFT	19	/* OTP Size shift */
259 #define CC_CAP_OTPSIZE_BASE	5	/* OTP Size base */
260 #define CC_CAP_JTAGP		0x00400000	/* JTAG Master Present */
261 #define CC_CAP_ROM		0x00800000	/* Internal boot rom active */
262 #define CC_CAP_BKPLN64		0x08000000	/* 64-bit backplane */
263 #define	CC_CAP_PMU		0x10000000	/* PMU Present, rev >= 20 */
264 #define	CC_CAP_SROM		0x40000000	/* Srom Present, rev >= 32 */
265 /* Nand flash present, rev >= 35 */
266 #define	CC_CAP_NFLASH		0x80000000
267 
268 #define	CC_CAP2_SECI		0x00000001	/* SECI Present, rev >= 36 */
269 /* GSIO (spi/i2c) present, rev >= 37 */
270 #define	CC_CAP2_GSIO		0x00000002
271 
272 /* pmucapabilities */
273 #define PCAP_REV_MASK	0x000000ff
274 #define PCAP_RC_MASK	0x00001f00
275 #define PCAP_RC_SHIFT	8
276 #define PCAP_TC_MASK	0x0001e000
277 #define PCAP_TC_SHIFT	13
278 #define PCAP_PC_MASK	0x001e0000
279 #define PCAP_PC_SHIFT	17
280 #define PCAP_VC_MASK	0x01e00000
281 #define PCAP_VC_SHIFT	21
282 #define PCAP_CC_MASK	0x1e000000
283 #define PCAP_CC_SHIFT	25
284 #define PCAP5_PC_MASK	0x003e0000	/* PMU corerev >= 5 */
285 #define PCAP5_PC_SHIFT	17
286 #define PCAP5_VC_MASK	0x07c00000
287 #define PCAP5_VC_SHIFT	22
288 #define PCAP5_CC_MASK	0xf8000000
289 #define PCAP5_CC_SHIFT	27
290 /* pmucapabilites_ext PMU rev >= 15 */
291 #define PCAPEXT_SR_SUPPORTED_MASK	(1 << 1)
292 /* retention_ctl PMU rev >= 15 */
293 #define PMU_RCTL_MACPHY_DISABLE_MASK        (1 << 26)
294 #define PMU_RCTL_LOGIC_DISABLE_MASK         (1 << 27)
295 
296 
297 /*
298 * Maximum delay for the PMU state transition in us.
299 * This is an upper bound intended for spinwaits etc.
300 */
301 #define PMU_MAX_TRANSITION_DLY	15000
302 
303 #endif				/* _SBCHIPC_H */
304