1 /*
2  * Copyright (c) 2011 Broadcom Corporation
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #include <linux/delay.h>
18 #include <linux/io.h>
19 
20 #include <brcm_hw_ids.h>
21 #include <chipcommon.h>
22 #include <brcmu_utils.h>
23 #include "pub.h"
24 #include "aiutils.h"
25 #include "pmu.h"
26 #include "soc.h"
27 
28 /*
29  * external LPO crystal frequency
30  */
31 #define EXT_ILP_HZ 32768
32 
33 /*
34  * Duration for ILP clock frequency measurment in milliseconds
35  *
36  * remark: 1000 must be an integer multiple of this duration
37  */
38 #define ILP_CALC_DUR	10
39 
40 /* Fields in pmucontrol */
41 #define	PCTL_ILP_DIV_MASK	0xffff0000
42 #define	PCTL_ILP_DIV_SHIFT	16
43 #define PCTL_PLL_PLLCTL_UPD	0x00000400	/* rev 2 */
44 #define PCTL_NOILP_ON_WAIT	0x00000200	/* rev 1 */
45 #define	PCTL_HT_REQ_EN		0x00000100
46 #define	PCTL_ALP_REQ_EN		0x00000080
47 #define	PCTL_XTALFREQ_MASK	0x0000007c
48 #define	PCTL_XTALFREQ_SHIFT	2
49 #define	PCTL_ILP_DIV_EN		0x00000002
50 #define	PCTL_LPO_SEL		0x00000001
51 
52 /* ILP clock */
53 #define	ILP_CLOCK		32000
54 
55 /* ALP clock on pre-PMU chips */
56 #define	ALP_CLOCK		20000000
57 
58 /* pmustatus */
59 #define PST_EXTLPOAVAIL	0x0100
60 #define PST_WDRESET	0x0080
61 #define	PST_INTPEND	0x0040
62 #define	PST_SBCLKST	0x0030
63 #define	PST_SBCLKST_ILP	0x0010
64 #define	PST_SBCLKST_ALP	0x0020
65 #define	PST_SBCLKST_HT	0x0030
66 #define	PST_ALPAVAIL	0x0008
67 #define	PST_HTAVAIL	0x0004
68 #define	PST_RESINIT	0x0003
69 
70 /* PMU resource bit position */
71 #define PMURES_BIT(bit)	(1 << (bit))
72 
73 /* PMU corerev and chip specific PLL controls.
74  * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary
75  * number to differentiate different PLLs controlled by the same PMU rev.
76  */
77 
78 /* pmu XtalFreqRatio */
79 #define	PMU_XTALFREQ_REG_ILPCTR_MASK	0x00001FFF
80 #define	PMU_XTALFREQ_REG_MEASURE_MASK	0x80000000
81 #define	PMU_XTALFREQ_REG_MEASURE_SHIFT	31
82 
83 /* 4313 resources */
84 #define	RES4313_BB_PU_RSRC		0
85 #define	RES4313_ILP_REQ_RSRC		1
86 #define	RES4313_XTAL_PU_RSRC		2
87 #define	RES4313_ALP_AVAIL_RSRC		3
88 #define	RES4313_RADIO_PU_RSRC		4
89 #define	RES4313_BG_PU_RSRC		5
90 #define	RES4313_VREG1P4_PU_RSRC		6
91 #define	RES4313_AFE_PWRSW_RSRC		7
92 #define	RES4313_RX_PWRSW_RSRC		8
93 #define	RES4313_TX_PWRSW_RSRC		9
94 #define	RES4313_BB_PWRSW_RSRC		10
95 #define	RES4313_SYNTH_PWRSW_RSRC	11
96 #define	RES4313_MISC_PWRSW_RSRC		12
97 #define	RES4313_BB_PLL_PWRSW_RSRC	13
98 #define	RES4313_HT_AVAIL_RSRC		14
99 #define	RES4313_MACPHY_CLK_AVAIL_RSRC	15
100 
101 u16 si_pmu_fast_pwrup_delay(struct si_pub *sih)
102 {
103 	uint delay = PMU_MAX_TRANSITION_DLY;
104 
105 	switch (ai_get_chip_id(sih)) {
106 	case BCMA_CHIP_ID_BCM43224:
107 	case BCMA_CHIP_ID_BCM43225:
108 	case BCMA_CHIP_ID_BCM4313:
109 		delay = 3700;
110 		break;
111 	default:
112 		break;
113 	}
114 
115 	return (u16) delay;
116 }
117 
118 u32 si_pmu_measure_alpclk(struct si_pub *sih)
119 {
120 	struct si_info *sii = container_of(sih, struct si_info, pub);
121 	struct bcma_device *core;
122 	u32 alp_khz;
123 
124 	if (ai_get_pmurev(sih) < 10)
125 		return 0;
126 
127 	/* Remember original core before switch to chipc */
128 	core = sii->icbus->drv_cc.core;
129 
130 	if (bcma_read32(core, CHIPCREGOFFS(pmustatus)) & PST_EXTLPOAVAIL) {
131 		u32 ilp_ctr, alp_hz;
132 
133 		/*
134 		 * Enable the reg to measure the freq,
135 		 * in case it was disabled before
136 		 */
137 		bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq),
138 			    1U << PMU_XTALFREQ_REG_MEASURE_SHIFT);
139 
140 		/* Delay for well over 4 ILP clocks */
141 		udelay(1000);
142 
143 		/* Read the latched number of ALP ticks per 4 ILP ticks */
144 		ilp_ctr = bcma_read32(core, CHIPCREGOFFS(pmu_xtalfreq)) &
145 			  PMU_XTALFREQ_REG_ILPCTR_MASK;
146 
147 		/*
148 		 * Turn off the PMU_XTALFREQ_REG_MEASURE_SHIFT
149 		 * bit to save power
150 		 */
151 		bcma_write32(core, CHIPCREGOFFS(pmu_xtalfreq), 0);
152 
153 		/* Calculate ALP frequency */
154 		alp_hz = (ilp_ctr * EXT_ILP_HZ) / 4;
155 
156 		/*
157 		 * Round to nearest 100KHz, and at
158 		 * the same time convert to KHz
159 		 */
160 		alp_khz = (alp_hz + 50000) / 100000 * 100;
161 	} else
162 		alp_khz = 0;
163 
164 	return alp_khz;
165 }
166