1 /* 2 * Copyright (c) 2010 Broadcom Corporation 3 * Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de> 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 12 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION 14 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 15 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #define __UNDEF_NO_VERSION__ 19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 20 21 #include <linux/etherdevice.h> 22 #include <linux/sched.h> 23 #include <linux/firmware.h> 24 #include <linux/interrupt.h> 25 #include <linux/module.h> 26 #include <linux/bcma/bcma.h> 27 #include <net/mac80211.h> 28 #include <defs.h> 29 #include "phy/phy_int.h" 30 #include "d11.h" 31 #include "channel.h" 32 #include "scb.h" 33 #include "pub.h" 34 #include "ucode_loader.h" 35 #include "mac80211_if.h" 36 #include "main.h" 37 #include "debug.h" 38 #include "led.h" 39 40 #define N_TX_QUEUES 4 /* #tx queues on mac80211<->driver interface */ 41 #define BRCMS_FLUSH_TIMEOUT 500 /* msec */ 42 43 /* Flags we support */ 44 #define MAC_FILTERS (FIF_ALLMULTI | \ 45 FIF_FCSFAIL | \ 46 FIF_CONTROL | \ 47 FIF_OTHER_BSS | \ 48 FIF_BCN_PRBRESP_PROMISC | \ 49 FIF_PSPOLL) 50 51 #define CHAN2GHZ(channel, freqency, chflags) { \ 52 .band = NL80211_BAND_2GHZ, \ 53 .center_freq = (freqency), \ 54 .hw_value = (channel), \ 55 .flags = chflags, \ 56 .max_antenna_gain = 0, \ 57 .max_power = 19, \ 58 } 59 60 #define CHAN5GHZ(channel, chflags) { \ 61 .band = NL80211_BAND_5GHZ, \ 62 .center_freq = 5000 + 5*(channel), \ 63 .hw_value = (channel), \ 64 .flags = chflags, \ 65 .max_antenna_gain = 0, \ 66 .max_power = 21, \ 67 } 68 69 #define RATE(rate100m, _flags) { \ 70 .bitrate = (rate100m), \ 71 .flags = (_flags), \ 72 .hw_value = (rate100m / 5), \ 73 } 74 75 struct firmware_hdr { 76 __le32 offset; 77 __le32 len; 78 __le32 idx; 79 }; 80 81 static const char * const brcms_firmwares[MAX_FW_IMAGES] = { 82 "brcm/bcm43xx", 83 NULL 84 }; 85 86 static int n_adapters_found; 87 88 MODULE_AUTHOR("Broadcom Corporation"); 89 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver."); 90 MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards"); 91 MODULE_LICENSE("Dual BSD/GPL"); 92 /* This needs to be adjusted when brcms_firmwares changes */ 93 MODULE_FIRMWARE("brcm/bcm43xx-0.fw"); 94 MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw"); 95 96 /* recognized BCMA Core IDs */ 97 static struct bcma_device_id brcms_coreid_table[] = { 98 BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS), 99 BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS), 100 BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS), 101 {}, 102 }; 103 MODULE_DEVICE_TABLE(bcma, brcms_coreid_table); 104 105 #if defined(CONFIG_BRCMDBG) 106 /* 107 * Module parameter for setting the debug message level. Available 108 * flags are specified by the BRCM_DL_* macros in 109 * drivers/net/wireless/brcm80211/include/defs.h. 110 */ 111 module_param_named(debug, brcm_msg_level, uint, 0644); 112 #endif 113 114 static struct ieee80211_channel brcms_2ghz_chantable[] = { 115 CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS), 116 CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS), 117 CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS), 118 CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS), 119 CHAN2GHZ(5, 2432, 0), 120 CHAN2GHZ(6, 2437, 0), 121 CHAN2GHZ(7, 2442, 0), 122 CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS), 123 CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS), 124 CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS), 125 CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS), 126 CHAN2GHZ(12, 2467, 127 IEEE80211_CHAN_NO_IR | 128 IEEE80211_CHAN_NO_HT40PLUS), 129 CHAN2GHZ(13, 2472, 130 IEEE80211_CHAN_NO_IR | 131 IEEE80211_CHAN_NO_HT40PLUS), 132 CHAN2GHZ(14, 2484, 133 IEEE80211_CHAN_NO_IR | 134 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS | 135 IEEE80211_CHAN_NO_OFDM) 136 }; 137 138 static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = { 139 /* UNII-1 */ 140 CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS), 141 CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS), 142 CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS), 143 CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS), 144 /* UNII-2 */ 145 CHAN5GHZ(52, 146 IEEE80211_CHAN_RADAR | 147 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), 148 CHAN5GHZ(56, 149 IEEE80211_CHAN_RADAR | 150 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), 151 CHAN5GHZ(60, 152 IEEE80211_CHAN_RADAR | 153 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), 154 CHAN5GHZ(64, 155 IEEE80211_CHAN_RADAR | 156 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), 157 /* MID */ 158 CHAN5GHZ(100, 159 IEEE80211_CHAN_RADAR | 160 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), 161 CHAN5GHZ(104, 162 IEEE80211_CHAN_RADAR | 163 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), 164 CHAN5GHZ(108, 165 IEEE80211_CHAN_RADAR | 166 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), 167 CHAN5GHZ(112, 168 IEEE80211_CHAN_RADAR | 169 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), 170 CHAN5GHZ(116, 171 IEEE80211_CHAN_RADAR | 172 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), 173 CHAN5GHZ(120, 174 IEEE80211_CHAN_RADAR | 175 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), 176 CHAN5GHZ(124, 177 IEEE80211_CHAN_RADAR | 178 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), 179 CHAN5GHZ(128, 180 IEEE80211_CHAN_RADAR | 181 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), 182 CHAN5GHZ(132, 183 IEEE80211_CHAN_RADAR | 184 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS), 185 CHAN5GHZ(136, 186 IEEE80211_CHAN_RADAR | 187 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS), 188 CHAN5GHZ(140, 189 IEEE80211_CHAN_RADAR | 190 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS | 191 IEEE80211_CHAN_NO_HT40MINUS), 192 /* UNII-3 */ 193 CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS), 194 CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS), 195 CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS), 196 CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS), 197 CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) 198 }; 199 200 /* 201 * The rate table is used for both 2.4G and 5G rates. The 202 * latter being a subset as it does not support CCK rates. 203 */ 204 static struct ieee80211_rate legacy_ratetable[] = { 205 RATE(10, 0), 206 RATE(20, IEEE80211_RATE_SHORT_PREAMBLE), 207 RATE(55, IEEE80211_RATE_SHORT_PREAMBLE), 208 RATE(110, IEEE80211_RATE_SHORT_PREAMBLE), 209 RATE(60, 0), 210 RATE(90, 0), 211 RATE(120, 0), 212 RATE(180, 0), 213 RATE(240, 0), 214 RATE(360, 0), 215 RATE(480, 0), 216 RATE(540, 0), 217 }; 218 219 static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = { 220 .band = NL80211_BAND_2GHZ, 221 .channels = brcms_2ghz_chantable, 222 .n_channels = ARRAY_SIZE(brcms_2ghz_chantable), 223 .bitrates = legacy_ratetable, 224 .n_bitrates = ARRAY_SIZE(legacy_ratetable), 225 .ht_cap = { 226 /* from include/linux/ieee80211.h */ 227 .cap = IEEE80211_HT_CAP_GRN_FLD | 228 IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40, 229 .ht_supported = true, 230 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, 231 .ampdu_density = AMPDU_DEF_MPDU_DENSITY, 232 .mcs = { 233 /* placeholders for now */ 234 .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0}, 235 .rx_highest = cpu_to_le16(500), 236 .tx_params = IEEE80211_HT_MCS_TX_DEFINED} 237 } 238 }; 239 240 static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = { 241 .band = NL80211_BAND_5GHZ, 242 .channels = brcms_5ghz_nphy_chantable, 243 .n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable), 244 .bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET, 245 .n_bitrates = ARRAY_SIZE(legacy_ratetable) - 246 BRCMS_LEGACY_5G_RATE_OFFSET, 247 .ht_cap = { 248 .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | 249 IEEE80211_HT_CAP_SGI_40, 250 .ht_supported = true, 251 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, 252 .ampdu_density = AMPDU_DEF_MPDU_DENSITY, 253 .mcs = { 254 /* placeholders for now */ 255 .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0}, 256 .rx_highest = cpu_to_le16(500), 257 .tx_params = IEEE80211_HT_MCS_TX_DEFINED} 258 } 259 }; 260 261 /* flags the given rate in rateset as requested */ 262 static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br) 263 { 264 u32 i; 265 266 for (i = 0; i < rs->count; i++) { 267 if (rate != (rs->rates[i] & 0x7f)) 268 continue; 269 270 if (is_br) 271 rs->rates[i] |= BRCMS_RATE_FLAG; 272 else 273 rs->rates[i] &= BRCMS_RATE_MASK; 274 return; 275 } 276 } 277 278 /* 279 * This function frees the WL per-device resources. 280 * 281 * This function frees resources owned by the WL device pointed to 282 * by the wl parameter. 283 * 284 * precondition: can both be called locked and unlocked 285 */ 286 static void brcms_free(struct brcms_info *wl) 287 { 288 struct brcms_timer *t, *next; 289 290 /* free ucode data */ 291 if (wl->fw.fw_cnt) 292 brcms_ucode_data_free(&wl->ucode); 293 if (wl->irq) 294 free_irq(wl->irq, wl); 295 296 /* kill dpc */ 297 tasklet_kill(&wl->tasklet); 298 299 if (wl->pub) { 300 brcms_debugfs_detach(wl->pub); 301 brcms_c_module_unregister(wl->pub, "linux", wl); 302 } 303 304 /* free common resources */ 305 if (wl->wlc) { 306 brcms_c_detach(wl->wlc); 307 wl->wlc = NULL; 308 wl->pub = NULL; 309 } 310 311 /* virtual interface deletion is deferred so we cannot spinwait */ 312 313 /* wait for all pending callbacks to complete */ 314 while (atomic_read(&wl->callbacks) > 0) 315 schedule(); 316 317 /* free timers */ 318 for (t = wl->timers; t; t = next) { 319 next = t->next; 320 #ifdef DEBUG 321 kfree(t->name); 322 #endif 323 kfree(t); 324 } 325 } 326 327 /* 328 * called from both kernel as from this kernel module (error flow on attach) 329 * precondition: perimeter lock is not acquired. 330 */ 331 static void brcms_remove(struct bcma_device *pdev) 332 { 333 struct ieee80211_hw *hw = bcma_get_drvdata(pdev); 334 struct brcms_info *wl = hw->priv; 335 336 if (wl->wlc) { 337 brcms_led_unregister(wl); 338 wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false); 339 wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy); 340 ieee80211_unregister_hw(hw); 341 } 342 343 brcms_free(wl); 344 345 bcma_set_drvdata(pdev, NULL); 346 ieee80211_free_hw(hw); 347 } 348 349 /* 350 * Precondition: Since this function is called in brcms_pci_probe() context, 351 * no locking is required. 352 */ 353 static void brcms_release_fw(struct brcms_info *wl) 354 { 355 int i; 356 for (i = 0; i < MAX_FW_IMAGES; i++) { 357 release_firmware(wl->fw.fw_bin[i]); 358 release_firmware(wl->fw.fw_hdr[i]); 359 } 360 } 361 362 /* 363 * Precondition: Since this function is called in brcms_pci_probe() context, 364 * no locking is required. 365 */ 366 static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev) 367 { 368 int status; 369 struct device *device = &pdev->dev; 370 char fw_name[100]; 371 int i; 372 373 memset(&wl->fw, 0, sizeof(struct brcms_firmware)); 374 for (i = 0; i < MAX_FW_IMAGES; i++) { 375 if (brcms_firmwares[i] == NULL) 376 break; 377 sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i], 378 UCODE_LOADER_API_VER); 379 status = request_firmware(&wl->fw.fw_bin[i], fw_name, device); 380 if (status) { 381 wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", 382 KBUILD_MODNAME, fw_name); 383 return status; 384 } 385 sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i], 386 UCODE_LOADER_API_VER); 387 status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device); 388 if (status) { 389 wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n", 390 KBUILD_MODNAME, fw_name); 391 return status; 392 } 393 wl->fw.hdr_num_entries[i] = 394 wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr)); 395 } 396 wl->fw.fw_cnt = i; 397 status = brcms_ucode_data_init(wl, &wl->ucode); 398 brcms_release_fw(wl); 399 return status; 400 } 401 402 static void brcms_ops_tx(struct ieee80211_hw *hw, 403 struct ieee80211_tx_control *control, 404 struct sk_buff *skb) 405 { 406 struct brcms_info *wl = hw->priv; 407 struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); 408 409 spin_lock_bh(&wl->lock); 410 if (!wl->pub->up) { 411 brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n"); 412 kfree_skb(skb); 413 goto done; 414 } 415 if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw)) 416 tx_info->rate_driver_data[0] = control->sta; 417 done: 418 spin_unlock_bh(&wl->lock); 419 } 420 421 static int brcms_ops_start(struct ieee80211_hw *hw) 422 { 423 struct brcms_info *wl = hw->priv; 424 bool blocked; 425 int err; 426 427 if (!wl->ucode.bcm43xx_bomminor) { 428 err = brcms_request_fw(wl, wl->wlc->hw->d11core); 429 if (err) 430 return -ENOENT; 431 } 432 433 ieee80211_wake_queues(hw); 434 spin_lock_bh(&wl->lock); 435 blocked = brcms_rfkill_set_hw_state(wl); 436 spin_unlock_bh(&wl->lock); 437 if (!blocked) 438 wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy); 439 440 spin_lock_bh(&wl->lock); 441 /* avoid acknowledging frames before a non-monitor device is added */ 442 wl->mute_tx = true; 443 444 if (!wl->pub->up) 445 if (!blocked) 446 err = brcms_up(wl); 447 else 448 err = -ERFKILL; 449 else 450 err = -ENODEV; 451 spin_unlock_bh(&wl->lock); 452 453 if (err != 0) 454 brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n", 455 __func__, err); 456 457 bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true); 458 return err; 459 } 460 461 static void brcms_ops_stop(struct ieee80211_hw *hw) 462 { 463 struct brcms_info *wl = hw->priv; 464 int status; 465 466 ieee80211_stop_queues(hw); 467 468 if (wl->wlc == NULL) 469 return; 470 471 spin_lock_bh(&wl->lock); 472 status = brcms_c_chipmatch(wl->wlc->hw->d11core); 473 spin_unlock_bh(&wl->lock); 474 if (!status) { 475 brcms_err(wl->wlc->hw->d11core, 476 "wl: brcms_ops_stop: chipmatch failed\n"); 477 return; 478 } 479 480 bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false); 481 482 /* put driver in down state */ 483 spin_lock_bh(&wl->lock); 484 brcms_down(wl); 485 spin_unlock_bh(&wl->lock); 486 } 487 488 static int 489 brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) 490 { 491 struct brcms_info *wl = hw->priv; 492 493 /* Just STA, AP and ADHOC for now */ 494 if (vif->type != NL80211_IFTYPE_STATION && 495 vif->type != NL80211_IFTYPE_AP && 496 vif->type != NL80211_IFTYPE_ADHOC) { 497 brcms_err(wl->wlc->hw->d11core, 498 "%s: Attempt to add type %d, only STA, AP and AdHoc for now\n", 499 __func__, vif->type); 500 return -EOPNOTSUPP; 501 } 502 503 spin_lock_bh(&wl->lock); 504 wl->wlc->vif = vif; 505 wl->mute_tx = false; 506 brcms_c_mute(wl->wlc, false); 507 if (vif->type == NL80211_IFTYPE_STATION) 508 brcms_c_start_station(wl->wlc, vif->addr); 509 else if (vif->type == NL80211_IFTYPE_AP) 510 brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid, 511 vif->bss_conf.ssid, vif->bss_conf.ssid_len); 512 else if (vif->type == NL80211_IFTYPE_ADHOC) 513 brcms_c_start_adhoc(wl->wlc, vif->addr); 514 spin_unlock_bh(&wl->lock); 515 516 return 0; 517 } 518 519 static void 520 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) 521 { 522 struct brcms_info *wl = hw->priv; 523 524 spin_lock_bh(&wl->lock); 525 wl->wlc->vif = NULL; 526 spin_unlock_bh(&wl->lock); 527 } 528 529 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed) 530 { 531 struct ieee80211_conf *conf = &hw->conf; 532 struct brcms_info *wl = hw->priv; 533 struct bcma_device *core = wl->wlc->hw->d11core; 534 int err = 0; 535 int new_int; 536 537 spin_lock_bh(&wl->lock); 538 if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { 539 brcms_c_set_beacon_listen_interval(wl->wlc, 540 conf->listen_interval); 541 } 542 if (changed & IEEE80211_CONF_CHANGE_MONITOR) 543 brcms_dbg_info(core, "%s: change monitor mode: %s\n", 544 __func__, conf->flags & IEEE80211_CONF_MONITOR ? 545 "true" : "false"); 546 if (changed & IEEE80211_CONF_CHANGE_PS) 547 brcms_err(core, "%s: change power-save mode: %s (implement)\n", 548 __func__, conf->flags & IEEE80211_CONF_PS ? 549 "true" : "false"); 550 551 if (changed & IEEE80211_CONF_CHANGE_POWER) { 552 err = brcms_c_set_tx_power(wl->wlc, conf->power_level); 553 if (err < 0) { 554 brcms_err(core, "%s: Error setting power_level\n", 555 __func__); 556 goto config_out; 557 } 558 new_int = brcms_c_get_tx_power(wl->wlc); 559 if (new_int != conf->power_level) 560 brcms_err(core, 561 "%s: Power level req != actual, %d %d\n", 562 __func__, conf->power_level, 563 new_int); 564 } 565 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { 566 if (conf->chandef.width == NL80211_CHAN_WIDTH_20 || 567 conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT) 568 err = brcms_c_set_channel(wl->wlc, 569 conf->chandef.chan->hw_value); 570 else 571 err = -ENOTSUPP; 572 } 573 if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) 574 err = brcms_c_set_rate_limit(wl->wlc, 575 conf->short_frame_max_tx_count, 576 conf->long_frame_max_tx_count); 577 578 config_out: 579 spin_unlock_bh(&wl->lock); 580 return err; 581 } 582 583 static void 584 brcms_ops_bss_info_changed(struct ieee80211_hw *hw, 585 struct ieee80211_vif *vif, 586 struct ieee80211_bss_conf *info, u32 changed) 587 { 588 struct brcms_info *wl = hw->priv; 589 struct bcma_device *core = wl->wlc->hw->d11core; 590 591 if (changed & BSS_CHANGED_ASSOC) { 592 /* association status changed (associated/disassociated) 593 * also implies a change in the AID. 594 */ 595 brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME, 596 __func__, info->assoc ? "" : "dis"); 597 spin_lock_bh(&wl->lock); 598 brcms_c_associate_upd(wl->wlc, info->assoc); 599 spin_unlock_bh(&wl->lock); 600 } 601 if (changed & BSS_CHANGED_ERP_SLOT) { 602 s8 val; 603 604 /* slot timing changed */ 605 if (info->use_short_slot) 606 val = 1; 607 else 608 val = 0; 609 spin_lock_bh(&wl->lock); 610 brcms_c_set_shortslot_override(wl->wlc, val); 611 spin_unlock_bh(&wl->lock); 612 } 613 614 if (changed & BSS_CHANGED_HT) { 615 /* 802.11n parameters changed */ 616 u16 mode = info->ht_operation_mode; 617 618 spin_lock_bh(&wl->lock); 619 brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG, 620 mode & IEEE80211_HT_OP_MODE_PROTECTION); 621 brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF, 622 mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); 623 brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS, 624 mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT); 625 spin_unlock_bh(&wl->lock); 626 } 627 if (changed & BSS_CHANGED_BASIC_RATES) { 628 struct ieee80211_supported_band *bi; 629 u32 br_mask, i; 630 u16 rate; 631 struct brcm_rateset rs; 632 int error; 633 634 /* retrieve the current rates */ 635 spin_lock_bh(&wl->lock); 636 brcms_c_get_current_rateset(wl->wlc, &rs); 637 spin_unlock_bh(&wl->lock); 638 639 br_mask = info->basic_rates; 640 bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)]; 641 for (i = 0; i < bi->n_bitrates; i++) { 642 /* convert to internal rate value */ 643 rate = (bi->bitrates[i].bitrate << 1) / 10; 644 645 /* set/clear basic rate flag */ 646 brcms_set_basic_rate(&rs, rate, br_mask & 1); 647 br_mask >>= 1; 648 } 649 650 /* update the rate set */ 651 spin_lock_bh(&wl->lock); 652 error = brcms_c_set_rateset(wl->wlc, &rs); 653 spin_unlock_bh(&wl->lock); 654 if (error) 655 brcms_err(core, "changing basic rates failed: %d\n", 656 error); 657 } 658 if (changed & BSS_CHANGED_BEACON_INT) { 659 /* Beacon interval changed */ 660 spin_lock_bh(&wl->lock); 661 brcms_c_set_beacon_period(wl->wlc, info->beacon_int); 662 spin_unlock_bh(&wl->lock); 663 } 664 if (changed & BSS_CHANGED_BSSID) { 665 /* BSSID changed, for whatever reason (IBSS and managed mode) */ 666 spin_lock_bh(&wl->lock); 667 brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid); 668 spin_unlock_bh(&wl->lock); 669 } 670 if (changed & BSS_CHANGED_SSID) { 671 /* BSSID changed, for whatever reason (IBSS and managed mode) */ 672 spin_lock_bh(&wl->lock); 673 brcms_c_set_ssid(wl->wlc, info->ssid, info->ssid_len); 674 spin_unlock_bh(&wl->lock); 675 } 676 if (changed & BSS_CHANGED_BEACON) { 677 /* Beacon data changed, retrieve new beacon (beaconing modes) */ 678 struct sk_buff *beacon; 679 u16 tim_offset = 0; 680 681 spin_lock_bh(&wl->lock); 682 beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL); 683 brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset, 684 info->dtim_period); 685 spin_unlock_bh(&wl->lock); 686 } 687 688 if (changed & BSS_CHANGED_AP_PROBE_RESP) { 689 struct sk_buff *probe_resp; 690 691 spin_lock_bh(&wl->lock); 692 probe_resp = ieee80211_proberesp_get(hw, vif); 693 brcms_c_set_new_probe_resp(wl->wlc, probe_resp); 694 spin_unlock_bh(&wl->lock); 695 } 696 697 if (changed & BSS_CHANGED_BEACON_ENABLED) { 698 /* Beaconing should be enabled/disabled (beaconing modes) */ 699 brcms_err(core, "%s: Beacon enabled: %s\n", __func__, 700 info->enable_beacon ? "true" : "false"); 701 if (info->enable_beacon && 702 hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) { 703 brcms_c_enable_probe_resp(wl->wlc, true); 704 } else { 705 brcms_c_enable_probe_resp(wl->wlc, false); 706 } 707 } 708 709 if (changed & BSS_CHANGED_CQM) { 710 /* Connection quality monitor config changed */ 711 brcms_err(core, "%s: cqm change: threshold %d, hys %d " 712 " (implement)\n", __func__, info->cqm_rssi_thold, 713 info->cqm_rssi_hyst); 714 } 715 716 if (changed & BSS_CHANGED_IBSS) { 717 /* IBSS join status changed */ 718 brcms_err(core, "%s: IBSS joined: %s (implement)\n", 719 __func__, info->ibss_joined ? "true" : "false"); 720 } 721 722 if (changed & BSS_CHANGED_ARP_FILTER) { 723 /* Hardware ARP filter address list or state changed */ 724 brcms_err(core, "%s: arp filtering: %d addresses" 725 " (implement)\n", __func__, info->arp_addr_cnt); 726 } 727 728 if (changed & BSS_CHANGED_QOS) { 729 /* 730 * QoS for this association was enabled/disabled. 731 * Note that it is only ever disabled for station mode. 732 */ 733 brcms_err(core, "%s: qos enabled: %s (implement)\n", 734 __func__, info->qos ? "true" : "false"); 735 } 736 return; 737 } 738 739 static void 740 brcms_ops_configure_filter(struct ieee80211_hw *hw, 741 unsigned int changed_flags, 742 unsigned int *total_flags, u64 multicast) 743 { 744 struct brcms_info *wl = hw->priv; 745 struct bcma_device *core = wl->wlc->hw->d11core; 746 747 changed_flags &= MAC_FILTERS; 748 *total_flags &= MAC_FILTERS; 749 750 if (changed_flags & FIF_ALLMULTI) 751 brcms_dbg_info(core, "FIF_ALLMULTI\n"); 752 if (changed_flags & FIF_FCSFAIL) 753 brcms_dbg_info(core, "FIF_FCSFAIL\n"); 754 if (changed_flags & FIF_CONTROL) 755 brcms_dbg_info(core, "FIF_CONTROL\n"); 756 if (changed_flags & FIF_OTHER_BSS) 757 brcms_dbg_info(core, "FIF_OTHER_BSS\n"); 758 if (changed_flags & FIF_PSPOLL) 759 brcms_dbg_info(core, "FIF_PSPOLL\n"); 760 if (changed_flags & FIF_BCN_PRBRESP_PROMISC) 761 brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n"); 762 763 spin_lock_bh(&wl->lock); 764 brcms_c_mac_promisc(wl->wlc, *total_flags); 765 spin_unlock_bh(&wl->lock); 766 return; 767 } 768 769 static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw, 770 struct ieee80211_vif *vif, 771 const u8 *mac_addr) 772 { 773 struct brcms_info *wl = hw->priv; 774 spin_lock_bh(&wl->lock); 775 brcms_c_scan_start(wl->wlc); 776 spin_unlock_bh(&wl->lock); 777 return; 778 } 779 780 static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw, 781 struct ieee80211_vif *vif) 782 { 783 struct brcms_info *wl = hw->priv; 784 spin_lock_bh(&wl->lock); 785 brcms_c_scan_stop(wl->wlc); 786 spin_unlock_bh(&wl->lock); 787 return; 788 } 789 790 static int 791 brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, 792 const struct ieee80211_tx_queue_params *params) 793 { 794 struct brcms_info *wl = hw->priv; 795 796 spin_lock_bh(&wl->lock); 797 brcms_c_wme_setparams(wl->wlc, queue, params, true); 798 spin_unlock_bh(&wl->lock); 799 800 return 0; 801 } 802 803 static int 804 brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 805 struct ieee80211_sta *sta) 806 { 807 struct brcms_info *wl = hw->priv; 808 struct scb *scb = &wl->wlc->pri_scb; 809 810 brcms_c_init_scb(scb); 811 812 wl->pub->global_ampdu = &(scb->scb_ampdu); 813 wl->pub->global_ampdu->scb = scb; 814 wl->pub->global_ampdu->max_pdu = 16; 815 816 /* 817 * minstrel_ht initiates addBA on our behalf by calling 818 * ieee80211_start_tx_ba_session() 819 */ 820 return 0; 821 } 822 823 static int 824 brcms_ops_ampdu_action(struct ieee80211_hw *hw, 825 struct ieee80211_vif *vif, 826 struct ieee80211_ampdu_params *params) 827 { 828 struct brcms_info *wl = hw->priv; 829 struct scb *scb = &wl->wlc->pri_scb; 830 int status; 831 struct ieee80211_sta *sta = params->sta; 832 enum ieee80211_ampdu_mlme_action action = params->action; 833 u16 tid = params->tid; 834 u8 buf_size = params->buf_size; 835 836 if (WARN_ON(scb->magic != SCB_MAGIC)) 837 return -EIDRM; 838 switch (action) { 839 case IEEE80211_AMPDU_RX_START: 840 break; 841 case IEEE80211_AMPDU_RX_STOP: 842 break; 843 case IEEE80211_AMPDU_TX_START: 844 spin_lock_bh(&wl->lock); 845 status = brcms_c_aggregatable(wl->wlc, tid); 846 spin_unlock_bh(&wl->lock); 847 if (!status) { 848 brcms_dbg_ht(wl->wlc->hw->d11core, 849 "START: tid %d is not agg\'able\n", tid); 850 return -EINVAL; 851 } 852 return IEEE80211_AMPDU_TX_START_IMMEDIATE; 853 854 case IEEE80211_AMPDU_TX_STOP_CONT: 855 case IEEE80211_AMPDU_TX_STOP_FLUSH: 856 case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: 857 spin_lock_bh(&wl->lock); 858 brcms_c_ampdu_flush(wl->wlc, sta, tid); 859 spin_unlock_bh(&wl->lock); 860 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); 861 break; 862 case IEEE80211_AMPDU_TX_OPERATIONAL: 863 /* 864 * BA window size from ADDBA response ('buf_size') defines how 865 * many outstanding MPDUs are allowed for the BA stream by 866 * recipient and traffic class. 'ampdu_factor' gives maximum 867 * AMPDU size. 868 */ 869 spin_lock_bh(&wl->lock); 870 brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size, 871 (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + 872 sta->ht_cap.ampdu_factor)) - 1); 873 spin_unlock_bh(&wl->lock); 874 /* Power save wakeup */ 875 break; 876 default: 877 brcms_err(wl->wlc->hw->d11core, 878 "%s: Invalid command, ignoring\n", __func__); 879 } 880 881 return 0; 882 } 883 884 static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw) 885 { 886 struct brcms_info *wl = hw->priv; 887 bool blocked; 888 889 spin_lock_bh(&wl->lock); 890 blocked = brcms_c_check_radio_disabled(wl->wlc); 891 spin_unlock_bh(&wl->lock); 892 893 wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked); 894 } 895 896 static bool brcms_tx_flush_completed(struct brcms_info *wl) 897 { 898 bool result; 899 900 spin_lock_bh(&wl->lock); 901 result = brcms_c_tx_flush_completed(wl->wlc); 902 spin_unlock_bh(&wl->lock); 903 return result; 904 } 905 906 static void brcms_ops_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 907 u32 queues, bool drop) 908 { 909 struct brcms_info *wl = hw->priv; 910 int ret; 911 912 no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false"); 913 914 ret = wait_event_timeout(wl->tx_flush_wq, 915 brcms_tx_flush_completed(wl), 916 msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT)); 917 918 brcms_dbg_mac80211(wl->wlc->hw->d11core, 919 "ret=%d\n", jiffies_to_msecs(ret)); 920 } 921 922 static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) 923 { 924 struct brcms_info *wl = hw->priv; 925 u64 tsf; 926 927 spin_lock_bh(&wl->lock); 928 tsf = brcms_c_tsf_get(wl->wlc); 929 spin_unlock_bh(&wl->lock); 930 931 return tsf; 932 } 933 934 static void brcms_ops_set_tsf(struct ieee80211_hw *hw, 935 struct ieee80211_vif *vif, u64 tsf) 936 { 937 struct brcms_info *wl = hw->priv; 938 939 spin_lock_bh(&wl->lock); 940 brcms_c_tsf_set(wl->wlc, tsf); 941 spin_unlock_bh(&wl->lock); 942 } 943 944 static int brcms_ops_beacon_set_tim(struct ieee80211_hw *hw, 945 struct ieee80211_sta *sta, bool set) 946 { 947 struct brcms_info *wl = hw->priv; 948 struct sk_buff *beacon = NULL; 949 u16 tim_offset = 0; 950 951 spin_lock_bh(&wl->lock); 952 if (wl->wlc->vif) 953 beacon = ieee80211_beacon_get_tim(hw, wl->wlc->vif, 954 &tim_offset, NULL); 955 if (beacon) 956 brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset, 957 wl->wlc->vif->bss_conf.dtim_period); 958 spin_unlock_bh(&wl->lock); 959 960 return 0; 961 } 962 963 static const struct ieee80211_ops brcms_ops = { 964 .tx = brcms_ops_tx, 965 .start = brcms_ops_start, 966 .stop = brcms_ops_stop, 967 .add_interface = brcms_ops_add_interface, 968 .remove_interface = brcms_ops_remove_interface, 969 .config = brcms_ops_config, 970 .bss_info_changed = brcms_ops_bss_info_changed, 971 .configure_filter = brcms_ops_configure_filter, 972 .sw_scan_start = brcms_ops_sw_scan_start, 973 .sw_scan_complete = brcms_ops_sw_scan_complete, 974 .conf_tx = brcms_ops_conf_tx, 975 .sta_add = brcms_ops_sta_add, 976 .ampdu_action = brcms_ops_ampdu_action, 977 .rfkill_poll = brcms_ops_rfkill_poll, 978 .flush = brcms_ops_flush, 979 .get_tsf = brcms_ops_get_tsf, 980 .set_tsf = brcms_ops_set_tsf, 981 .set_tim = brcms_ops_beacon_set_tim, 982 }; 983 984 void brcms_dpc(struct tasklet_struct *t) 985 { 986 struct brcms_info *wl; 987 988 wl = from_tasklet(wl, t, tasklet); 989 990 spin_lock_bh(&wl->lock); 991 992 /* call the common second level interrupt handler */ 993 if (wl->pub->up) { 994 if (wl->resched) { 995 unsigned long flags; 996 997 spin_lock_irqsave(&wl->isr_lock, flags); 998 brcms_c_intrsupd(wl->wlc); 999 spin_unlock_irqrestore(&wl->isr_lock, flags); 1000 } 1001 1002 wl->resched = brcms_c_dpc(wl->wlc, true); 1003 } 1004 1005 /* brcms_c_dpc() may bring the driver down */ 1006 if (!wl->pub->up) 1007 goto done; 1008 1009 /* re-schedule dpc */ 1010 if (wl->resched) 1011 tasklet_schedule(&wl->tasklet); 1012 else 1013 /* re-enable interrupts */ 1014 brcms_intrson(wl); 1015 1016 done: 1017 spin_unlock_bh(&wl->lock); 1018 wake_up(&wl->tx_flush_wq); 1019 } 1020 1021 static irqreturn_t brcms_isr(int irq, void *dev_id) 1022 { 1023 struct brcms_info *wl; 1024 irqreturn_t ret = IRQ_NONE; 1025 1026 wl = (struct brcms_info *) dev_id; 1027 1028 spin_lock(&wl->isr_lock); 1029 1030 /* call common first level interrupt handler */ 1031 if (brcms_c_isr(wl->wlc)) { 1032 /* schedule second level handler */ 1033 tasklet_schedule(&wl->tasklet); 1034 ret = IRQ_HANDLED; 1035 } 1036 1037 spin_unlock(&wl->isr_lock); 1038 1039 return ret; 1040 } 1041 1042 /* 1043 * is called in brcms_pci_probe() context, therefore no locking required. 1044 */ 1045 static int ieee_hw_rate_init(struct ieee80211_hw *hw) 1046 { 1047 struct brcms_info *wl = hw->priv; 1048 struct brcms_c_info *wlc = wl->wlc; 1049 struct ieee80211_supported_band *band; 1050 int has_5g = 0; 1051 u16 phy_type; 1052 1053 hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL; 1054 hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL; 1055 1056 phy_type = brcms_c_get_phy_type(wl->wlc, 0); 1057 if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) { 1058 band = &wlc->bandstate[BAND_2G_INDEX]->band; 1059 *band = brcms_band_2GHz_nphy_template; 1060 if (phy_type == PHY_TYPE_LCN) { 1061 /* Single stream */ 1062 band->ht_cap.mcs.rx_mask[1] = 0; 1063 band->ht_cap.mcs.rx_highest = cpu_to_le16(72); 1064 } 1065 hw->wiphy->bands[NL80211_BAND_2GHZ] = band; 1066 } else { 1067 return -EPERM; 1068 } 1069 1070 /* Assume all bands use the same phy. True for 11n devices. */ 1071 if (wl->pub->_nbands > 1) { 1072 has_5g++; 1073 if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) { 1074 band = &wlc->bandstate[BAND_5G_INDEX]->band; 1075 *band = brcms_band_5GHz_nphy_template; 1076 hw->wiphy->bands[NL80211_BAND_5GHZ] = band; 1077 } else { 1078 return -EPERM; 1079 } 1080 } 1081 return 0; 1082 } 1083 1084 /* 1085 * is called in brcms_pci_probe() context, therefore no locking required. 1086 */ 1087 static int ieee_hw_init(struct ieee80211_hw *hw) 1088 { 1089 ieee80211_hw_set(hw, AMPDU_AGGREGATION); 1090 ieee80211_hw_set(hw, SIGNAL_DBM); 1091 ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); 1092 1093 hw->extra_tx_headroom = brcms_c_get_header_len(); 1094 hw->queues = N_TX_QUEUES; 1095 hw->max_rates = 2; /* Primary rate and 1 fallback rate */ 1096 1097 /* channel change time is dependent on chip and band */ 1098 hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | 1099 BIT(NL80211_IFTYPE_AP) | 1100 BIT(NL80211_IFTYPE_ADHOC); 1101 1102 /* 1103 * deactivate sending probe responses by ucude, because this will 1104 * cause problems when WPS is used. 1105 * 1106 * hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; 1107 */ 1108 1109 wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); 1110 1111 hw->rate_control_algorithm = "minstrel_ht"; 1112 1113 hw->sta_data_size = 0; 1114 return ieee_hw_rate_init(hw); 1115 } 1116 1117 /* 1118 * attach to the WL device. 1119 * 1120 * Attach to the WL device identified by vendor and device parameters. 1121 * regs is a host accessible memory address pointing to WL device registers. 1122 * 1123 * is called in brcms_bcma_probe() context, therefore no locking required. 1124 */ 1125 static struct brcms_info *brcms_attach(struct bcma_device *pdev) 1126 { 1127 struct brcms_info *wl = NULL; 1128 int unit, err; 1129 struct ieee80211_hw *hw; 1130 u8 perm[ETH_ALEN]; 1131 1132 unit = n_adapters_found; 1133 err = 0; 1134 1135 if (unit < 0) 1136 return NULL; 1137 1138 /* allocate private info */ 1139 hw = bcma_get_drvdata(pdev); 1140 if (hw != NULL) 1141 wl = hw->priv; 1142 if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL)) 1143 return NULL; 1144 wl->wiphy = hw->wiphy; 1145 1146 atomic_set(&wl->callbacks, 0); 1147 1148 init_waitqueue_head(&wl->tx_flush_wq); 1149 1150 /* setup the bottom half handler */ 1151 tasklet_setup(&wl->tasklet, brcms_dpc); 1152 1153 spin_lock_init(&wl->lock); 1154 spin_lock_init(&wl->isr_lock); 1155 1156 /* common load-time initialization */ 1157 wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err); 1158 if (!wl->wlc) { 1159 wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n", 1160 KBUILD_MODNAME, err); 1161 goto fail; 1162 } 1163 wl->pub = brcms_c_pub(wl->wlc); 1164 1165 wl->pub->ieee_hw = hw; 1166 1167 /* register our interrupt handler */ 1168 if (request_irq(pdev->irq, brcms_isr, 1169 IRQF_SHARED, KBUILD_MODNAME, wl)) { 1170 wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit); 1171 goto fail; 1172 } 1173 wl->irq = pdev->irq; 1174 1175 /* register module */ 1176 brcms_c_module_register(wl->pub, "linux", wl, NULL); 1177 1178 if (ieee_hw_init(hw)) { 1179 wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit, 1180 __func__); 1181 goto fail; 1182 } 1183 1184 brcms_c_regd_init(wl->wlc); 1185 1186 memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN); 1187 if (WARN_ON(!is_valid_ether_addr(perm))) 1188 goto fail; 1189 SET_IEEE80211_PERM_ADDR(hw, perm); 1190 1191 err = ieee80211_register_hw(hw); 1192 if (err) 1193 wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status" 1194 "%d\n", __func__, err); 1195 1196 if (wl->pub->srom_ccode[0] && 1197 regulatory_hint(wl->wiphy, wl->pub->srom_ccode)) 1198 wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__); 1199 1200 brcms_debugfs_attach(wl->pub); 1201 brcms_debugfs_create_files(wl->pub); 1202 n_adapters_found++; 1203 return wl; 1204 1205 fail: 1206 brcms_free(wl); 1207 return NULL; 1208 } 1209 1210 1211 1212 /* 1213 * determines if a device is a WL device, and if so, attaches it. 1214 * 1215 * This function determines if a device pointed to by pdev is a WL device, 1216 * and if so, performs a brcms_attach() on it. 1217 * 1218 * Perimeter lock is initialized in the course of this function. 1219 */ 1220 static int brcms_bcma_probe(struct bcma_device *pdev) 1221 { 1222 struct brcms_info *wl; 1223 struct ieee80211_hw *hw; 1224 1225 dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n", 1226 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class, 1227 pdev->irq); 1228 1229 if ((pdev->id.manuf != BCMA_MANUF_BCM) || 1230 (pdev->id.id != BCMA_CORE_80211)) 1231 return -ENODEV; 1232 1233 hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops); 1234 if (!hw) { 1235 pr_err("%s: ieee80211_alloc_hw failed\n", __func__); 1236 return -ENOMEM; 1237 } 1238 1239 SET_IEEE80211_DEV(hw, &pdev->dev); 1240 1241 bcma_set_drvdata(pdev, hw); 1242 1243 memset(hw->priv, 0, sizeof(*wl)); 1244 1245 wl = brcms_attach(pdev); 1246 if (!wl) { 1247 pr_err("%s: brcms_attach failed!\n", __func__); 1248 return -ENODEV; 1249 } 1250 brcms_led_register(wl); 1251 1252 return 0; 1253 } 1254 1255 static int brcms_suspend(struct bcma_device *pdev) 1256 { 1257 struct brcms_info *wl; 1258 struct ieee80211_hw *hw; 1259 1260 hw = bcma_get_drvdata(pdev); 1261 wl = hw->priv; 1262 if (!wl) { 1263 pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME, 1264 __func__); 1265 return -ENODEV; 1266 } 1267 1268 /* only need to flag hw is down for proper resume */ 1269 spin_lock_bh(&wl->lock); 1270 wl->pub->hw_up = false; 1271 spin_unlock_bh(&wl->lock); 1272 1273 brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n"); 1274 1275 return 0; 1276 } 1277 1278 static int brcms_resume(struct bcma_device *pdev) 1279 { 1280 return 0; 1281 } 1282 1283 static struct bcma_driver brcms_bcma_driver = { 1284 .name = KBUILD_MODNAME, 1285 .probe = brcms_bcma_probe, 1286 .suspend = brcms_suspend, 1287 .resume = brcms_resume, 1288 .remove = brcms_remove, 1289 .id_table = brcms_coreid_table, 1290 }; 1291 1292 /* 1293 * This is the main entry point for the brcmsmac driver. 1294 * 1295 * This function is scheduled upon module initialization and 1296 * does the driver registration, which result in brcms_bcma_probe() 1297 * call resulting in the driver bringup. 1298 */ 1299 static void brcms_driver_init(struct work_struct *work) 1300 { 1301 int error; 1302 1303 error = bcma_driver_register(&brcms_bcma_driver); 1304 if (error) 1305 pr_err("%s: register returned %d\n", __func__, error); 1306 } 1307 1308 static DECLARE_WORK(brcms_driver_work, brcms_driver_init); 1309 1310 static int __init brcms_module_init(void) 1311 { 1312 brcms_debugfs_init(); 1313 if (!schedule_work(&brcms_driver_work)) 1314 return -EBUSY; 1315 1316 return 0; 1317 } 1318 1319 /* 1320 * This function unloads the brcmsmac driver from the system. 1321 * 1322 * This function unconditionally unloads the brcmsmac driver module from the 1323 * system. 1324 * 1325 */ 1326 static void __exit brcms_module_exit(void) 1327 { 1328 cancel_work_sync(&brcms_driver_work); 1329 bcma_driver_unregister(&brcms_bcma_driver); 1330 brcms_debugfs_exit(); 1331 } 1332 1333 module_init(brcms_module_init); 1334 module_exit(brcms_module_exit); 1335 1336 /* 1337 * precondition: perimeter lock has been acquired 1338 */ 1339 void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif, 1340 bool state, int prio) 1341 { 1342 brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__); 1343 } 1344 1345 /* 1346 * precondition: perimeter lock has been acquired 1347 */ 1348 void brcms_init(struct brcms_info *wl) 1349 { 1350 brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n", 1351 wl->pub->unit); 1352 brcms_reset(wl); 1353 brcms_c_init(wl->wlc, wl->mute_tx); 1354 } 1355 1356 /* 1357 * precondition: perimeter lock has been acquired 1358 */ 1359 uint brcms_reset(struct brcms_info *wl) 1360 { 1361 brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit); 1362 brcms_c_reset(wl->wlc); 1363 1364 /* dpc will not be rescheduled */ 1365 wl->resched = false; 1366 1367 /* inform publicly that interface is down */ 1368 wl->pub->up = false; 1369 1370 return 0; 1371 } 1372 1373 void brcms_fatal_error(struct brcms_info *wl) 1374 { 1375 brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n", 1376 wl->wlc->pub->unit); 1377 brcms_reset(wl); 1378 ieee80211_restart_hw(wl->pub->ieee_hw); 1379 } 1380 1381 /* 1382 * These are interrupt on/off entry points. Disable interrupts 1383 * during interrupt state transition. 1384 */ 1385 void brcms_intrson(struct brcms_info *wl) 1386 { 1387 unsigned long flags; 1388 1389 spin_lock_irqsave(&wl->isr_lock, flags); 1390 brcms_c_intrson(wl->wlc); 1391 spin_unlock_irqrestore(&wl->isr_lock, flags); 1392 } 1393 1394 u32 brcms_intrsoff(struct brcms_info *wl) 1395 { 1396 unsigned long flags; 1397 u32 status; 1398 1399 spin_lock_irqsave(&wl->isr_lock, flags); 1400 status = brcms_c_intrsoff(wl->wlc); 1401 spin_unlock_irqrestore(&wl->isr_lock, flags); 1402 return status; 1403 } 1404 1405 void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask) 1406 { 1407 unsigned long flags; 1408 1409 spin_lock_irqsave(&wl->isr_lock, flags); 1410 brcms_c_intrsrestore(wl->wlc, macintmask); 1411 spin_unlock_irqrestore(&wl->isr_lock, flags); 1412 } 1413 1414 /* 1415 * precondition: perimeter lock has been acquired 1416 */ 1417 int brcms_up(struct brcms_info *wl) 1418 { 1419 int error = 0; 1420 1421 if (wl->pub->up) 1422 return 0; 1423 1424 error = brcms_c_up(wl->wlc); 1425 1426 return error; 1427 } 1428 1429 /* 1430 * precondition: perimeter lock has been acquired 1431 */ 1432 void brcms_down(struct brcms_info *wl) 1433 __must_hold(&wl->lock) 1434 { 1435 uint callbacks, ret_val = 0; 1436 1437 /* call common down function */ 1438 ret_val = brcms_c_down(wl->wlc); 1439 callbacks = atomic_read(&wl->callbacks) - ret_val; 1440 1441 /* wait for down callbacks to complete */ 1442 spin_unlock_bh(&wl->lock); 1443 1444 /* For HIGH_only driver, it's important to actually schedule other work, 1445 * not just spin wait since everything runs at schedule level 1446 */ 1447 SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000); 1448 1449 spin_lock_bh(&wl->lock); 1450 } 1451 1452 /* 1453 * precondition: perimeter lock is not acquired 1454 */ 1455 static void _brcms_timer(struct work_struct *work) 1456 { 1457 struct brcms_timer *t = container_of(work, struct brcms_timer, 1458 dly_wrk.work); 1459 1460 spin_lock_bh(&t->wl->lock); 1461 1462 if (t->set) { 1463 if (t->periodic) { 1464 atomic_inc(&t->wl->callbacks); 1465 ieee80211_queue_delayed_work(t->wl->pub->ieee_hw, 1466 &t->dly_wrk, 1467 msecs_to_jiffies(t->ms)); 1468 } else { 1469 t->set = false; 1470 } 1471 1472 t->fn(t->arg); 1473 } 1474 1475 atomic_dec(&t->wl->callbacks); 1476 1477 spin_unlock_bh(&t->wl->lock); 1478 } 1479 1480 /* 1481 * Adds a timer to the list. Caller supplies a timer function. 1482 * Is called from wlc. 1483 * 1484 * precondition: perimeter lock has been acquired 1485 */ 1486 struct brcms_timer *brcms_init_timer(struct brcms_info *wl, 1487 void (*fn) (void *arg), 1488 void *arg, const char *name) 1489 { 1490 struct brcms_timer *t; 1491 1492 t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC); 1493 if (!t) 1494 return NULL; 1495 1496 INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer); 1497 t->wl = wl; 1498 t->fn = fn; 1499 t->arg = arg; 1500 t->next = wl->timers; 1501 wl->timers = t; 1502 1503 #ifdef DEBUG 1504 t->name = kstrdup(name, GFP_ATOMIC); 1505 #endif 1506 1507 return t; 1508 } 1509 1510 /* 1511 * adds only the kernel timer since it's going to be more accurate 1512 * as well as it's easier to make it periodic 1513 * 1514 * precondition: perimeter lock has been acquired 1515 */ 1516 void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic) 1517 { 1518 struct ieee80211_hw *hw = t->wl->pub->ieee_hw; 1519 1520 #ifdef DEBUG 1521 if (t->set) 1522 brcms_dbg_info(t->wl->wlc->hw->d11core, 1523 "%s: Already set. Name: %s, per %d\n", 1524 __func__, t->name, periodic); 1525 #endif 1526 t->ms = ms; 1527 t->periodic = (bool) periodic; 1528 if (!t->set) { 1529 t->set = true; 1530 atomic_inc(&t->wl->callbacks); 1531 } 1532 1533 ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms)); 1534 } 1535 1536 /* 1537 * return true if timer successfully deleted, false if still pending 1538 * 1539 * precondition: perimeter lock has been acquired 1540 */ 1541 bool brcms_del_timer(struct brcms_timer *t) 1542 { 1543 if (t->set) { 1544 t->set = false; 1545 if (!cancel_delayed_work(&t->dly_wrk)) 1546 return false; 1547 1548 atomic_dec(&t->wl->callbacks); 1549 } 1550 1551 return true; 1552 } 1553 1554 /* 1555 * precondition: perimeter lock has been acquired 1556 */ 1557 void brcms_free_timer(struct brcms_timer *t) 1558 { 1559 struct brcms_info *wl = t->wl; 1560 struct brcms_timer *tmp; 1561 1562 /* delete the timer in case it is active */ 1563 brcms_del_timer(t); 1564 1565 if (wl->timers == t) { 1566 wl->timers = wl->timers->next; 1567 #ifdef DEBUG 1568 kfree(t->name); 1569 #endif 1570 kfree(t); 1571 return; 1572 1573 } 1574 1575 tmp = wl->timers; 1576 while (tmp) { 1577 if (tmp->next == t) { 1578 tmp->next = t->next; 1579 #ifdef DEBUG 1580 kfree(t->name); 1581 #endif 1582 kfree(t); 1583 return; 1584 } 1585 tmp = tmp->next; 1586 } 1587 1588 } 1589 1590 /* 1591 * precondition: no locking required 1592 */ 1593 int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx) 1594 { 1595 int i, entry; 1596 const u8 *pdata; 1597 struct firmware_hdr *hdr; 1598 for (i = 0; i < wl->fw.fw_cnt; i++) { 1599 hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data; 1600 for (entry = 0; entry < wl->fw.hdr_num_entries[i]; 1601 entry++, hdr++) { 1602 u32 len = le32_to_cpu(hdr->len); 1603 if (le32_to_cpu(hdr->idx) == idx) { 1604 pdata = wl->fw.fw_bin[i]->data + 1605 le32_to_cpu(hdr->offset); 1606 *pbuf = kvmalloc(len, GFP_KERNEL); 1607 if (*pbuf == NULL) 1608 goto fail; 1609 memcpy(*pbuf, pdata, len); 1610 return 0; 1611 } 1612 } 1613 } 1614 brcms_err(wl->wlc->hw->d11core, 1615 "ERROR: ucode buf tag:%d can not be found!\n", idx); 1616 *pbuf = NULL; 1617 fail: 1618 return -ENODATA; 1619 } 1620 1621 /* 1622 * Precondition: Since this function is called in brcms_bcma_probe() context, 1623 * no locking is required. 1624 */ 1625 int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx) 1626 { 1627 int i, entry; 1628 const u8 *pdata; 1629 struct firmware_hdr *hdr; 1630 for (i = 0; i < wl->fw.fw_cnt; i++) { 1631 hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data; 1632 for (entry = 0; entry < wl->fw.hdr_num_entries[i]; 1633 entry++, hdr++) { 1634 if (le32_to_cpu(hdr->idx) == idx) { 1635 pdata = wl->fw.fw_bin[i]->data + 1636 le32_to_cpu(hdr->offset); 1637 if (le32_to_cpu(hdr->len) != 4) { 1638 brcms_err(wl->wlc->hw->d11core, 1639 "ERROR: fw hdr len\n"); 1640 return -ENOMSG; 1641 } 1642 *n_bytes = le32_to_cpu(*((__le32 *) pdata)); 1643 return 0; 1644 } 1645 } 1646 } 1647 brcms_err(wl->wlc->hw->d11core, 1648 "ERROR: ucode tag:%d can not be found!\n", idx); 1649 return -ENOMSG; 1650 } 1651 1652 /* 1653 * precondition: can both be called locked and unlocked 1654 */ 1655 void brcms_ucode_free_buf(void *p) 1656 { 1657 kvfree(p); 1658 } 1659 1660 /* 1661 * checks validity of all firmware images loaded from user space 1662 * 1663 * Precondition: Since this function is called in brcms_bcma_probe() context, 1664 * no locking is required. 1665 */ 1666 int brcms_check_firmwares(struct brcms_info *wl) 1667 { 1668 int i; 1669 int entry; 1670 int rc = 0; 1671 const struct firmware *fw; 1672 const struct firmware *fw_hdr; 1673 struct firmware_hdr *ucode_hdr; 1674 for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) { 1675 fw = wl->fw.fw_bin[i]; 1676 fw_hdr = wl->fw.fw_hdr[i]; 1677 if (fw == NULL && fw_hdr == NULL) { 1678 break; 1679 } else if (fw == NULL || fw_hdr == NULL) { 1680 wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n", 1681 __func__); 1682 rc = -EBADF; 1683 } else if (fw_hdr->size % sizeof(struct firmware_hdr)) { 1684 wiphy_err(wl->wiphy, "%s: non integral fw hdr file " 1685 "size %zu/%zu\n", __func__, fw_hdr->size, 1686 sizeof(struct firmware_hdr)); 1687 rc = -EBADF; 1688 } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) { 1689 wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n", 1690 __func__, fw->size); 1691 rc = -EBADF; 1692 } else { 1693 /* check if ucode section overruns firmware image */ 1694 ucode_hdr = (struct firmware_hdr *)fw_hdr->data; 1695 for (entry = 0; entry < wl->fw.hdr_num_entries[i] && 1696 !rc; entry++, ucode_hdr++) { 1697 if (le32_to_cpu(ucode_hdr->offset) + 1698 le32_to_cpu(ucode_hdr->len) > 1699 fw->size) { 1700 wiphy_err(wl->wiphy, 1701 "%s: conflicting bin/hdr\n", 1702 __func__); 1703 rc = -EBADF; 1704 } 1705 } 1706 } 1707 } 1708 if (rc == 0 && wl->fw.fw_cnt != i) { 1709 wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__, 1710 wl->fw.fw_cnt); 1711 rc = -EBADF; 1712 } 1713 return rc; 1714 } 1715 1716 /* 1717 * precondition: perimeter lock has been acquired 1718 */ 1719 bool brcms_rfkill_set_hw_state(struct brcms_info *wl) 1720 __must_hold(&wl->lock) 1721 { 1722 bool blocked = brcms_c_check_radio_disabled(wl->wlc); 1723 1724 spin_unlock_bh(&wl->lock); 1725 wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked); 1726 if (blocked) 1727 wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy); 1728 spin_lock_bh(&wl->lock); 1729 return blocked; 1730 } 1731