1 // SPDX-License-Identifier: ISC 2 /* 3 * Copyright (c) 2010 Broadcom Corporation 4 */ 5 6 #include <linux/types.h> 7 #include <linux/atomic.h> 8 #include <linux/kernel.h> 9 #include <linux/kthread.h> 10 #include <linux/printk.h> 11 #include <linux/pci_ids.h> 12 #include <linux/netdevice.h> 13 #include <linux/interrupt.h> 14 #include <linux/sched/signal.h> 15 #include <linux/mmc/sdio.h> 16 #include <linux/mmc/sdio_ids.h> 17 #include <linux/mmc/sdio_func.h> 18 #include <linux/mmc/card.h> 19 #include <linux/mmc/core.h> 20 #include <linux/semaphore.h> 21 #include <linux/firmware.h> 22 #include <linux/module.h> 23 #include <linux/bcma/bcma.h> 24 #include <linux/debugfs.h> 25 #include <linux/vmalloc.h> 26 #include <asm/unaligned.h> 27 #include <defs.h> 28 #include <brcmu_wifi.h> 29 #include <brcmu_utils.h> 30 #include <brcm_hw_ids.h> 31 #include <soc.h> 32 #include "sdio.h" 33 #include "chip.h" 34 #include "firmware.h" 35 #include "core.h" 36 #include "common.h" 37 #include "bcdc.h" 38 39 #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) 40 #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500) 41 42 /* watermark expressed in number of words */ 43 #define DEFAULT_F2_WATERMARK 0x8 44 #define CY_4373_F2_WATERMARK 0x40 45 #define CY_4373_F1_MESBUSYCTRL (CY_4373_F2_WATERMARK | SBSDIO_MESBUSYCTRL_ENAB) 46 #define CY_43012_F2_WATERMARK 0x60 47 #define CY_43012_MES_WATERMARK 0x50 48 #define CY_43012_MESBUSYCTRL (CY_43012_MES_WATERMARK | \ 49 SBSDIO_MESBUSYCTRL_ENAB) 50 #define CY_4339_F2_WATERMARK 48 51 #define CY_4339_MES_WATERMARK 80 52 #define CY_4339_MESBUSYCTRL (CY_4339_MES_WATERMARK | \ 53 SBSDIO_MESBUSYCTRL_ENAB) 54 #define CY_43455_F2_WATERMARK 0x60 55 #define CY_43455_MES_WATERMARK 0x50 56 #define CY_43455_MESBUSYCTRL (CY_43455_MES_WATERMARK | \ 57 SBSDIO_MESBUSYCTRL_ENAB) 58 #define CY_435X_F2_WATERMARK 0x40 59 #define CY_435X_F1_MESBUSYCTRL (CY_435X_F2_WATERMARK | \ 60 SBSDIO_MESBUSYCTRL_ENAB) 61 62 #ifdef DEBUG 63 64 #define BRCMF_TRAP_INFO_SIZE 80 65 66 #define CBUF_LEN (128) 67 68 /* Device console log buffer state */ 69 #define CONSOLE_BUFFER_MAX 2024 70 71 struct rte_log_le { 72 __le32 buf; /* Can't be pointer on (64-bit) hosts */ 73 __le32 buf_size; 74 __le32 idx; 75 char *_buf_compat; /* Redundant pointer for backward compat. */ 76 }; 77 78 struct rte_console { 79 /* Virtual UART 80 * When there is no UART (e.g. Quickturn), 81 * the host should write a complete 82 * input line directly into cbuf and then write 83 * the length into vcons_in. 84 * This may also be used when there is a real UART 85 * (at risk of conflicting with 86 * the real UART). vcons_out is currently unused. 87 */ 88 uint vcons_in; 89 uint vcons_out; 90 91 /* Output (logging) buffer 92 * Console output is written to a ring buffer log_buf at index log_idx. 93 * The host may read the output when it sees log_idx advance. 94 * Output will be lost if the output wraps around faster than the host 95 * polls. 96 */ 97 struct rte_log_le log_le; 98 99 /* Console input line buffer 100 * Characters are read one at a time into cbuf 101 * until <CR> is received, then 102 * the buffer is processed as a command line. 103 * Also used for virtual UART. 104 */ 105 uint cbuf_idx; 106 char cbuf[CBUF_LEN]; 107 }; 108 109 #endif /* DEBUG */ 110 #include <chipcommon.h> 111 112 #include "bus.h" 113 #include "debug.h" 114 #include "tracepoint.h" 115 116 #define TXQLEN 2048 /* bulk tx queue length */ 117 #define TXHI (TXQLEN - 256) /* turn on flow control above TXHI */ 118 #define TXLOW (TXHI - 256) /* turn off flow control below TXLOW */ 119 #define PRIOMASK 7 120 121 #define TXRETRIES 2 /* # of retries for tx frames */ 122 123 #define BRCMF_RXBOUND 50 /* Default for max rx frames in 124 one scheduling */ 125 126 #define BRCMF_TXBOUND 20 /* Default for max tx frames in 127 one scheduling */ 128 129 #define BRCMF_TXMINMAX 1 /* Max tx frames if rx still pending */ 130 131 #define MEMBLOCK 2048 /* Block size used for downloading 132 of dongle image */ 133 #define MAX_DATA_BUF (32 * 1024) /* Must be large enough to hold 134 biggest possible glom */ 135 136 #define BRCMF_FIRSTREAD (1 << 6) 137 138 #define BRCMF_CONSOLE 10 /* watchdog interval to poll console */ 139 140 /* SBSDIO_DEVICE_CTL */ 141 142 /* 1: device will assert busy signal when receiving CMD53 */ 143 #define SBSDIO_DEVCTL_SETBUSY 0x01 144 /* 1: assertion of sdio interrupt is synchronous to the sdio clock */ 145 #define SBSDIO_DEVCTL_SPI_INTR_SYNC 0x02 146 /* 1: mask all interrupts to host except the chipActive (rev 8) */ 147 #define SBSDIO_DEVCTL_CA_INT_ONLY 0x04 148 /* 1: isolate internal sdio signals, put external pads in tri-state; requires 149 * sdio bus power cycle to clear (rev 9) */ 150 #define SBSDIO_DEVCTL_PADS_ISO 0x08 151 /* 1: enable F2 Watermark */ 152 #define SBSDIO_DEVCTL_F2WM_ENAB 0x10 153 /* Force SD->SB reset mapping (rev 11) */ 154 #define SBSDIO_DEVCTL_SB_RST_CTL 0x30 155 /* Determined by CoreControl bit */ 156 #define SBSDIO_DEVCTL_RST_CORECTL 0x00 157 /* Force backplane reset */ 158 #define SBSDIO_DEVCTL_RST_BPRESET 0x10 159 /* Force no backplane reset */ 160 #define SBSDIO_DEVCTL_RST_NOBPRESET 0x20 161 162 /* direct(mapped) cis space */ 163 164 /* MAPPED common CIS address */ 165 #define SBSDIO_CIS_BASE_COMMON 0x1000 166 /* maximum bytes in one CIS */ 167 #define SBSDIO_CIS_SIZE_LIMIT 0x200 168 /* cis offset addr is < 17 bits */ 169 #define SBSDIO_CIS_OFT_ADDR_MASK 0x1FFFF 170 171 /* manfid tuple length, include tuple, link bytes */ 172 #define SBSDIO_CIS_MANFID_TUPLE_LEN 6 173 174 #define SD_REG(field) \ 175 (offsetof(struct sdpcmd_regs, field)) 176 177 /* SDIO function 1 register CHIPCLKCSR */ 178 /* Force ALP request to backplane */ 179 #define SBSDIO_FORCE_ALP 0x01 180 /* Force HT request to backplane */ 181 #define SBSDIO_FORCE_HT 0x02 182 /* Force ILP request to backplane */ 183 #define SBSDIO_FORCE_ILP 0x04 184 /* Make ALP ready (power up xtal) */ 185 #define SBSDIO_ALP_AVAIL_REQ 0x08 186 /* Make HT ready (power up PLL) */ 187 #define SBSDIO_HT_AVAIL_REQ 0x10 188 /* Squelch clock requests from HW */ 189 #define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 190 /* Status: ALP is ready */ 191 #define SBSDIO_ALP_AVAIL 0x40 192 /* Status: HT is ready */ 193 #define SBSDIO_HT_AVAIL 0x80 194 #define SBSDIO_CSR_MASK 0x1F 195 #define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL) 196 #define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS) 197 #define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS) 198 #define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval)) 199 #define SBSDIO_CLKAV(regval, alponly) \ 200 (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval))) 201 202 /* intstatus */ 203 #define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */ 204 #define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */ 205 #define I_SMB_SW2 (1 << 2) /* To SB Mail S/W interrupt 2 */ 206 #define I_SMB_SW3 (1 << 3) /* To SB Mail S/W interrupt 3 */ 207 #define I_SMB_SW_MASK 0x0000000f /* To SB Mail S/W interrupts mask */ 208 #define I_SMB_SW_SHIFT 0 /* To SB Mail S/W interrupts shift */ 209 #define I_HMB_SW0 (1 << 4) /* To Host Mail S/W interrupt 0 */ 210 #define I_HMB_SW1 (1 << 5) /* To Host Mail S/W interrupt 1 */ 211 #define I_HMB_SW2 (1 << 6) /* To Host Mail S/W interrupt 2 */ 212 #define I_HMB_SW3 (1 << 7) /* To Host Mail S/W interrupt 3 */ 213 #define I_HMB_SW_MASK 0x000000f0 /* To Host Mail S/W interrupts mask */ 214 #define I_HMB_SW_SHIFT 4 /* To Host Mail S/W interrupts shift */ 215 #define I_WR_OOSYNC (1 << 8) /* Write Frame Out Of Sync */ 216 #define I_RD_OOSYNC (1 << 9) /* Read Frame Out Of Sync */ 217 #define I_PC (1 << 10) /* descriptor error */ 218 #define I_PD (1 << 11) /* data error */ 219 #define I_DE (1 << 12) /* Descriptor protocol Error */ 220 #define I_RU (1 << 13) /* Receive descriptor Underflow */ 221 #define I_RO (1 << 14) /* Receive fifo Overflow */ 222 #define I_XU (1 << 15) /* Transmit fifo Underflow */ 223 #define I_RI (1 << 16) /* Receive Interrupt */ 224 #define I_BUSPWR (1 << 17) /* SDIO Bus Power Change (rev 9) */ 225 #define I_XMTDATA_AVAIL (1 << 23) /* bits in fifo */ 226 #define I_XI (1 << 24) /* Transmit Interrupt */ 227 #define I_RF_TERM (1 << 25) /* Read Frame Terminate */ 228 #define I_WF_TERM (1 << 26) /* Write Frame Terminate */ 229 #define I_PCMCIA_XU (1 << 27) /* PCMCIA Transmit FIFO Underflow */ 230 #define I_SBINT (1 << 28) /* sbintstatus Interrupt */ 231 #define I_CHIPACTIVE (1 << 29) /* chip from doze to active state */ 232 #define I_SRESET (1 << 30) /* CCCR RES interrupt */ 233 #define I_IOE2 (1U << 31) /* CCCR IOE2 Bit Changed */ 234 #define I_ERRORS (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU) 235 #define I_DMA (I_RI | I_XI | I_ERRORS) 236 237 /* corecontrol */ 238 #define CC_CISRDY (1 << 0) /* CIS Ready */ 239 #define CC_BPRESEN (1 << 1) /* CCCR RES signal */ 240 #define CC_F2RDY (1 << 2) /* set CCCR IOR2 bit */ 241 #define CC_CLRPADSISO (1 << 3) /* clear SDIO pads isolation */ 242 #define CC_XMTDATAAVAIL_MODE (1 << 4) 243 #define CC_XMTDATAAVAIL_CTRL (1 << 5) 244 245 /* SDA_FRAMECTRL */ 246 #define SFC_RF_TERM (1 << 0) /* Read Frame Terminate */ 247 #define SFC_WF_TERM (1 << 1) /* Write Frame Terminate */ 248 #define SFC_CRC4WOOS (1 << 2) /* CRC error for write out of sync */ 249 #define SFC_ABORTALL (1 << 3) /* Abort all in-progress frames */ 250 251 /* 252 * Software allocation of To SB Mailbox resources 253 */ 254 255 /* tosbmailbox bits corresponding to intstatus bits */ 256 #define SMB_NAK (1 << 0) /* Frame NAK */ 257 #define SMB_INT_ACK (1 << 1) /* Host Interrupt ACK */ 258 #define SMB_USE_OOB (1 << 2) /* Use OOB Wakeup */ 259 #define SMB_DEV_INT (1 << 3) /* Miscellaneous Interrupt */ 260 261 /* tosbmailboxdata */ 262 #define SMB_DATA_VERSION_SHIFT 16 /* host protocol version */ 263 264 /* 265 * Software allocation of To Host Mailbox resources 266 */ 267 268 /* intstatus bits */ 269 #define I_HMB_FC_STATE I_HMB_SW0 /* Flow Control State */ 270 #define I_HMB_FC_CHANGE I_HMB_SW1 /* Flow Control State Changed */ 271 #define I_HMB_FRAME_IND I_HMB_SW2 /* Frame Indication */ 272 #define I_HMB_HOST_INT I_HMB_SW3 /* Miscellaneous Interrupt */ 273 274 /* tohostmailboxdata */ 275 #define HMB_DATA_NAKHANDLED 0x0001 /* retransmit NAK'd frame */ 276 #define HMB_DATA_DEVREADY 0x0002 /* talk to host after enable */ 277 #define HMB_DATA_FC 0x0004 /* per prio flowcontrol update flag */ 278 #define HMB_DATA_FWREADY 0x0008 /* fw ready for protocol activity */ 279 #define HMB_DATA_FWHALT 0x0010 /* firmware halted */ 280 281 #define HMB_DATA_FCDATA_MASK 0xff000000 282 #define HMB_DATA_FCDATA_SHIFT 24 283 284 #define HMB_DATA_VERSION_MASK 0x00ff0000 285 #define HMB_DATA_VERSION_SHIFT 16 286 287 /* 288 * Software-defined protocol header 289 */ 290 291 /* Current protocol version */ 292 #define SDPCM_PROT_VERSION 4 293 294 /* 295 * Shared structure between dongle and the host. 296 * The structure contains pointers to trap or assert information. 297 */ 298 #define SDPCM_SHARED_VERSION 0x0003 299 #define SDPCM_SHARED_VERSION_MASK 0x00FF 300 #define SDPCM_SHARED_ASSERT_BUILT 0x0100 301 #define SDPCM_SHARED_ASSERT 0x0200 302 #define SDPCM_SHARED_TRAP 0x0400 303 304 /* Space for header read, limit for data packets */ 305 #define MAX_HDR_READ (1 << 6) 306 #define MAX_RX_DATASZ 2048 307 308 /* Bump up limit on waiting for HT to account for first startup; 309 * if the image is doing a CRC calculation before programming the PMU 310 * for HT availability, it could take a couple hundred ms more, so 311 * max out at a 1 second (1000000us). 312 */ 313 #undef PMU_MAX_TRANSITION_DLY 314 #define PMU_MAX_TRANSITION_DLY 1000000 315 316 /* Value for ChipClockCSR during initial setup */ 317 #define BRCMF_INIT_CLKCTL1 (SBSDIO_FORCE_HW_CLKREQ_OFF | \ 318 SBSDIO_ALP_AVAIL_REQ) 319 320 /* Flags for SDH calls */ 321 #define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED) 322 323 #define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change 324 * when idle 325 */ 326 #define BRCMF_IDLE_INTERVAL 1 327 328 #define KSO_WAIT_US 50 329 #define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US) 330 #define BRCMF_SDIO_MAX_ACCESS_ERRORS 5 331 332 #ifdef DEBUG 333 /* Device console log buffer state */ 334 struct brcmf_console { 335 uint count; /* Poll interval msec counter */ 336 uint log_addr; /* Log struct address (fixed) */ 337 struct rte_log_le log_le; /* Log struct (host copy) */ 338 uint bufsize; /* Size of log buffer */ 339 u8 *buf; /* Log buffer (host copy) */ 340 uint last; /* Last buffer read index */ 341 }; 342 343 struct brcmf_trap_info { 344 __le32 type; 345 __le32 epc; 346 __le32 cpsr; 347 __le32 spsr; 348 __le32 r0; /* a1 */ 349 __le32 r1; /* a2 */ 350 __le32 r2; /* a3 */ 351 __le32 r3; /* a4 */ 352 __le32 r4; /* v1 */ 353 __le32 r5; /* v2 */ 354 __le32 r6; /* v3 */ 355 __le32 r7; /* v4 */ 356 __le32 r8; /* v5 */ 357 __le32 r9; /* sb/v6 */ 358 __le32 r10; /* sl/v7 */ 359 __le32 r11; /* fp/v8 */ 360 __le32 r12; /* ip */ 361 __le32 r13; /* sp */ 362 __le32 r14; /* lr */ 363 __le32 pc; /* r15 */ 364 }; 365 #endif /* DEBUG */ 366 367 struct sdpcm_shared { 368 u32 flags; 369 u32 trap_addr; 370 u32 assert_exp_addr; 371 u32 assert_file_addr; 372 u32 assert_line; 373 u32 console_addr; /* Address of struct rte_console */ 374 u32 msgtrace_addr; 375 u8 tag[32]; 376 u32 brpt_addr; 377 }; 378 379 struct sdpcm_shared_le { 380 __le32 flags; 381 __le32 trap_addr; 382 __le32 assert_exp_addr; 383 __le32 assert_file_addr; 384 __le32 assert_line; 385 __le32 console_addr; /* Address of struct rte_console */ 386 __le32 msgtrace_addr; 387 u8 tag[32]; 388 __le32 brpt_addr; 389 }; 390 391 /* dongle SDIO bus specific header info */ 392 struct brcmf_sdio_hdrinfo { 393 u8 seq_num; 394 u8 channel; 395 u16 len; 396 u16 len_left; 397 u16 len_nxtfrm; 398 u8 dat_offset; 399 bool lastfrm; 400 u16 tail_pad; 401 }; 402 403 /* 404 * hold counter variables 405 */ 406 struct brcmf_sdio_count { 407 uint intrcount; /* Count of device interrupt callbacks */ 408 uint lastintrs; /* Count as of last watchdog timer */ 409 uint pollcnt; /* Count of active polls */ 410 uint regfails; /* Count of R_REG failures */ 411 uint tx_sderrs; /* Count of tx attempts with sd errors */ 412 uint fcqueued; /* Tx packets that got queued */ 413 uint rxrtx; /* Count of rtx requests (NAK to dongle) */ 414 uint rx_toolong; /* Receive frames too long to receive */ 415 uint rxc_errors; /* SDIO errors when reading control frames */ 416 uint rx_hdrfail; /* SDIO errors on header reads */ 417 uint rx_badhdr; /* Bad received headers (roosync?) */ 418 uint rx_badseq; /* Mismatched rx sequence number */ 419 uint fc_rcvd; /* Number of flow-control events received */ 420 uint fc_xoff; /* Number which turned on flow-control */ 421 uint fc_xon; /* Number which turned off flow-control */ 422 uint rxglomfail; /* Failed deglom attempts */ 423 uint rxglomframes; /* Number of glom frames (superframes) */ 424 uint rxglompkts; /* Number of packets from glom frames */ 425 uint f2rxhdrs; /* Number of header reads */ 426 uint f2rxdata; /* Number of frame data reads */ 427 uint f2txdata; /* Number of f2 frame writes */ 428 uint f1regdata; /* Number of f1 register accesses */ 429 uint tickcnt; /* Number of watchdog been schedule */ 430 ulong tx_ctlerrs; /* Err of sending ctrl frames */ 431 ulong tx_ctlpkts; /* Ctrl frames sent to dongle */ 432 ulong rx_ctlerrs; /* Err of processing rx ctrl frames */ 433 ulong rx_ctlpkts; /* Ctrl frames processed from dongle */ 434 ulong rx_readahead_cnt; /* packets where header read-ahead was used */ 435 }; 436 437 /* misc chip info needed by some of the routines */ 438 /* Private data for SDIO bus interaction */ 439 struct brcmf_sdio { 440 struct brcmf_sdio_dev *sdiodev; /* sdio device handler */ 441 struct brcmf_chip *ci; /* Chip info struct */ 442 struct brcmf_core *sdio_core; /* sdio core info struct */ 443 444 u32 hostintmask; /* Copy of Host Interrupt Mask */ 445 atomic_t intstatus; /* Intstatus bits (events) pending */ 446 atomic_t fcstate; /* State of dongle flow-control */ 447 448 uint blocksize; /* Block size of SDIO transfers */ 449 uint roundup; /* Max roundup limit */ 450 451 struct pktq txq; /* Queue length used for flow-control */ 452 u8 flowcontrol; /* per prio flow control bitmask */ 453 u8 tx_seq; /* Transmit sequence number (next) */ 454 u8 tx_max; /* Maximum transmit sequence allowed */ 455 456 u8 *hdrbuf; /* buffer for handling rx frame */ 457 u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */ 458 u8 rx_seq; /* Receive sequence number (expected) */ 459 struct brcmf_sdio_hdrinfo cur_read; 460 /* info of current read frame */ 461 bool rxskip; /* Skip receive (awaiting NAK ACK) */ 462 bool rxpending; /* Data frame pending in dongle */ 463 464 uint rxbound; /* Rx frames to read before resched */ 465 uint txbound; /* Tx frames to send before resched */ 466 uint txminmax; 467 468 struct sk_buff *glomd; /* Packet containing glomming descriptor */ 469 struct sk_buff_head glom; /* Packet list for glommed superframe */ 470 471 u8 *rxbuf; /* Buffer for receiving control packets */ 472 uint rxblen; /* Allocated length of rxbuf */ 473 u8 *rxctl; /* Aligned pointer into rxbuf */ 474 u8 *rxctl_orig; /* pointer for freeing rxctl */ 475 uint rxlen; /* Length of valid data in buffer */ 476 spinlock_t rxctl_lock; /* protection lock for ctrl frame resources */ 477 478 u8 sdpcm_ver; /* Bus protocol reported by dongle */ 479 480 bool intr; /* Use interrupts */ 481 bool poll; /* Use polling */ 482 atomic_t ipend; /* Device interrupt is pending */ 483 uint spurious; /* Count of spurious interrupts */ 484 uint pollrate; /* Ticks between device polls */ 485 uint polltick; /* Tick counter */ 486 487 #ifdef DEBUG 488 uint console_interval; 489 struct brcmf_console console; /* Console output polling support */ 490 uint console_addr; /* Console address from shared struct */ 491 #endif /* DEBUG */ 492 493 uint clkstate; /* State of sd and backplane clock(s) */ 494 s32 idletime; /* Control for activity timeout */ 495 s32 idlecount; /* Activity timeout counter */ 496 s32 idleclock; /* How to set bus driver when idle */ 497 bool rxflow_mode; /* Rx flow control mode */ 498 bool rxflow; /* Is rx flow control on */ 499 bool alp_only; /* Don't use HT clock (ALP only) */ 500 501 u8 *ctrl_frame_buf; 502 u16 ctrl_frame_len; 503 bool ctrl_frame_stat; 504 int ctrl_frame_err; 505 506 spinlock_t txq_lock; /* protect bus->txq */ 507 wait_queue_head_t ctrl_wait; 508 wait_queue_head_t dcmd_resp_wait; 509 510 struct timer_list timer; 511 struct completion watchdog_wait; 512 struct task_struct *watchdog_tsk; 513 bool wd_active; 514 515 struct workqueue_struct *brcmf_wq; 516 struct work_struct datawork; 517 bool dpc_triggered; 518 bool dpc_running; 519 520 bool txoff; /* Transmit flow-controlled */ 521 struct brcmf_sdio_count sdcnt; 522 bool sr_enabled; /* SaveRestore enabled */ 523 bool sleeping; 524 525 u8 tx_hdrlen; /* sdio bus header length for tx packet */ 526 bool txglom; /* host tx glomming enable flag */ 527 u16 head_align; /* buffer pointer alignment */ 528 u16 sgentry_align; /* scatter-gather buffer alignment */ 529 }; 530 531 /* clkstate */ 532 #define CLK_NONE 0 533 #define CLK_SDONLY 1 534 #define CLK_PENDING 2 535 #define CLK_AVAIL 3 536 537 #ifdef DEBUG 538 static int qcount[NUMPRIO]; 539 #endif /* DEBUG */ 540 541 #define DEFAULT_SDIO_DRIVE_STRENGTH 6 /* in milliamps */ 542 543 #define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL) 544 545 /* Limit on rounding up frames */ 546 static const uint max_roundup = 512; 547 548 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT 549 #define ALIGNMENT 8 550 #else 551 #define ALIGNMENT 4 552 #endif 553 554 enum brcmf_sdio_frmtype { 555 BRCMF_SDIO_FT_NORMAL, 556 BRCMF_SDIO_FT_SUPER, 557 BRCMF_SDIO_FT_SUB, 558 }; 559 560 #define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu)) 561 562 /* SDIO Pad drive strength to select value mappings */ 563 struct sdiod_drive_str { 564 u8 strength; /* Pad Drive Strength in mA */ 565 u8 sel; /* Chip-specific select value */ 566 }; 567 568 /* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */ 569 static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = { 570 {32, 0x6}, 571 {26, 0x7}, 572 {22, 0x4}, 573 {16, 0x5}, 574 {12, 0x2}, 575 {8, 0x3}, 576 {4, 0x0}, 577 {0, 0x1} 578 }; 579 580 /* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */ 581 static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = { 582 {6, 0x7}, 583 {5, 0x6}, 584 {4, 0x5}, 585 {3, 0x4}, 586 {2, 0x2}, 587 {1, 0x1}, 588 {0, 0x0} 589 }; 590 591 /* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */ 592 static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = { 593 {3, 0x3}, 594 {2, 0x2}, 595 {1, 0x1}, 596 {0, 0x0} }; 597 598 /* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */ 599 static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = { 600 {16, 0x7}, 601 {12, 0x5}, 602 {8, 0x3}, 603 {4, 0x1} 604 }; 605 606 BRCMF_FW_DEF(43143, "brcmfmac43143-sdio"); 607 BRCMF_FW_DEF(43241B0, "brcmfmac43241b0-sdio"); 608 BRCMF_FW_DEF(43241B4, "brcmfmac43241b4-sdio"); 609 BRCMF_FW_DEF(43241B5, "brcmfmac43241b5-sdio"); 610 BRCMF_FW_DEF(4329, "brcmfmac4329-sdio"); 611 BRCMF_FW_DEF(4330, "brcmfmac4330-sdio"); 612 BRCMF_FW_DEF(4334, "brcmfmac4334-sdio"); 613 BRCMF_FW_DEF(43340, "brcmfmac43340-sdio"); 614 BRCMF_FW_DEF(4335, "brcmfmac4335-sdio"); 615 BRCMF_FW_DEF(43362, "brcmfmac43362-sdio"); 616 BRCMF_FW_DEF(4339, "brcmfmac4339-sdio"); 617 BRCMF_FW_DEF(43430A0, "brcmfmac43430a0-sdio"); 618 /* Note the names are not postfixed with a1 for backward compatibility */ 619 BRCMF_FW_DEF(43430A1, "brcmfmac43430-sdio"); 620 BRCMF_FW_DEF(43455, "brcmfmac43455-sdio"); 621 BRCMF_FW_DEF(43456, "brcmfmac43456-sdio"); 622 BRCMF_FW_DEF(4354, "brcmfmac4354-sdio"); 623 BRCMF_FW_DEF(4356, "brcmfmac4356-sdio"); 624 BRCMF_FW_DEF(4359, "brcmfmac4359-sdio"); 625 BRCMF_FW_DEF(4373, "brcmfmac4373-sdio"); 626 BRCMF_FW_DEF(43012, "brcmfmac43012-sdio"); 627 628 static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = { 629 BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143), 630 BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0x0000001F, 43241B0), 631 BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0x00000020, 43241B4), 632 BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, 43241B5), 633 BRCMF_FW_ENTRY(BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, 4329), 634 BRCMF_FW_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330), 635 BRCMF_FW_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334), 636 BRCMF_FW_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340), 637 BRCMF_FW_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43340), 638 BRCMF_FW_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335), 639 BRCMF_FW_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362), 640 BRCMF_FW_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339), 641 BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000001, 43430A0), 642 BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFE, 43430A1), 643 BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0x00000200, 43456), 644 BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFDC0, 43455), 645 BRCMF_FW_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354), 646 BRCMF_FW_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356), 647 BRCMF_FW_ENTRY(BRCM_CC_4359_CHIP_ID, 0xFFFFFFFF, 4359), 648 BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373), 649 BRCMF_FW_ENTRY(CY_CC_43012_CHIP_ID, 0xFFFFFFFF, 43012) 650 }; 651 652 #define TXCTL_CREDITS 2 653 654 static void pkt_align(struct sk_buff *p, int len, int align) 655 { 656 uint datalign; 657 datalign = (unsigned long)(p->data); 658 datalign = roundup(datalign, (align)) - datalign; 659 if (datalign) 660 skb_pull(p, datalign); 661 __skb_trim(p, len); 662 } 663 664 /* To check if there's window offered */ 665 static bool data_ok(struct brcmf_sdio *bus) 666 { 667 u8 tx_rsv = 0; 668 669 /* Reserve TXCTL_CREDITS credits for txctl when it is ready to send */ 670 if (bus->ctrl_frame_stat) 671 tx_rsv = TXCTL_CREDITS; 672 673 return (bus->tx_max - bus->tx_seq - tx_rsv) != 0 && 674 ((bus->tx_max - bus->tx_seq - tx_rsv) & 0x80) == 0; 675 676 } 677 678 /* To check if there's window offered */ 679 static bool txctl_ok(struct brcmf_sdio *bus) 680 { 681 return (bus->tx_max - bus->tx_seq) != 0 && 682 ((bus->tx_max - bus->tx_seq) & 0x80) == 0; 683 } 684 685 static int 686 brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) 687 { 688 u8 wr_val = 0, rd_val, cmp_val, bmask; 689 int err = 0; 690 int err_cnt = 0; 691 int try_cnt = 0; 692 693 brcmf_dbg(TRACE, "Enter: on=%d\n", on); 694 695 sdio_retune_crc_disable(bus->sdiodev->func1); 696 697 /* Cannot re-tune if device is asleep; defer till we're awake */ 698 if (on) 699 sdio_retune_hold_now(bus->sdiodev->func1); 700 701 wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); 702 /* 1st KSO write goes to AOS wake up core if device is asleep */ 703 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); 704 705 /* In case of 43012 chip, the chip could go down immediately after 706 * KSO bit is cleared. So the further reads of KSO register could 707 * fail. Thereby just bailing out immediately after clearing KSO 708 * bit, to avoid polling of KSO bit. 709 */ 710 if (!on && bus->ci->chip == CY_CC_43012_CHIP_ID) 711 return err; 712 713 if (on) { 714 /* device WAKEUP through KSO: 715 * write bit 0 & read back until 716 * both bits 0 (kso bit) & 1 (dev on status) are set 717 */ 718 cmp_val = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK | 719 SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK; 720 bmask = cmp_val; 721 usleep_range(2000, 3000); 722 } else { 723 /* Put device to sleep, turn off KSO */ 724 cmp_val = 0; 725 /* only check for bit0, bit1(dev on status) may not 726 * get cleared right away 727 */ 728 bmask = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK; 729 } 730 731 do { 732 /* reliable KSO bit set/clr: 733 * the sdiod sleep write access is synced to PMU 32khz clk 734 * just one write attempt may fail, 735 * read it back until it matches written value 736 */ 737 rd_val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, 738 &err); 739 if (!err) { 740 if ((rd_val & bmask) == cmp_val) 741 break; 742 err_cnt = 0; 743 } 744 /* bail out upon subsequent access errors */ 745 if (err && (err_cnt++ > BRCMF_SDIO_MAX_ACCESS_ERRORS)) 746 break; 747 748 udelay(KSO_WAIT_US); 749 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, 750 &err); 751 752 } while (try_cnt++ < MAX_KSO_ATTEMPTS); 753 754 if (try_cnt > 2) 755 brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt, 756 rd_val, err); 757 758 if (try_cnt > MAX_KSO_ATTEMPTS) 759 brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err); 760 761 if (on) 762 sdio_retune_release(bus->sdiodev->func1); 763 764 sdio_retune_crc_enable(bus->sdiodev->func1); 765 766 return err; 767 } 768 769 #define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE) 770 771 /* Turn backplane clock on or off */ 772 static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok) 773 { 774 int err; 775 u8 clkctl, clkreq, devctl; 776 unsigned long timeout; 777 778 brcmf_dbg(SDIO, "Enter\n"); 779 780 clkctl = 0; 781 782 if (bus->sr_enabled) { 783 bus->clkstate = (on ? CLK_AVAIL : CLK_SDONLY); 784 return 0; 785 } 786 787 if (on) { 788 /* Request HT Avail */ 789 clkreq = 790 bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ; 791 792 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 793 clkreq, &err); 794 if (err) { 795 brcmf_err("HT Avail request error: %d\n", err); 796 return -EBADE; 797 } 798 799 /* Check current status */ 800 clkctl = brcmf_sdiod_readb(bus->sdiodev, 801 SBSDIO_FUNC1_CHIPCLKCSR, &err); 802 if (err) { 803 brcmf_err("HT Avail read error: %d\n", err); 804 return -EBADE; 805 } 806 807 /* Go to pending and await interrupt if appropriate */ 808 if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) { 809 /* Allow only clock-available interrupt */ 810 devctl = brcmf_sdiod_readb(bus->sdiodev, 811 SBSDIO_DEVICE_CTL, &err); 812 if (err) { 813 brcmf_err("Devctl error setting CA: %d\n", err); 814 return -EBADE; 815 } 816 817 devctl |= SBSDIO_DEVCTL_CA_INT_ONLY; 818 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL, 819 devctl, &err); 820 brcmf_dbg(SDIO, "CLKCTL: set PENDING\n"); 821 bus->clkstate = CLK_PENDING; 822 823 return 0; 824 } else if (bus->clkstate == CLK_PENDING) { 825 /* Cancel CA-only interrupt filter */ 826 devctl = brcmf_sdiod_readb(bus->sdiodev, 827 SBSDIO_DEVICE_CTL, &err); 828 devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; 829 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL, 830 devctl, &err); 831 } 832 833 /* Otherwise, wait here (polling) for HT Avail */ 834 timeout = jiffies + 835 msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000); 836 while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { 837 clkctl = brcmf_sdiod_readb(bus->sdiodev, 838 SBSDIO_FUNC1_CHIPCLKCSR, 839 &err); 840 if (time_after(jiffies, timeout)) 841 break; 842 else 843 usleep_range(5000, 10000); 844 } 845 if (err) { 846 brcmf_err("HT Avail request error: %d\n", err); 847 return -EBADE; 848 } 849 if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { 850 brcmf_err("HT Avail timeout (%d): clkctl 0x%02x\n", 851 PMU_MAX_TRANSITION_DLY, clkctl); 852 return -EBADE; 853 } 854 855 /* Mark clock available */ 856 bus->clkstate = CLK_AVAIL; 857 brcmf_dbg(SDIO, "CLKCTL: turned ON\n"); 858 859 #if defined(DEBUG) 860 if (!bus->alp_only) { 861 if (SBSDIO_ALPONLY(clkctl)) 862 brcmf_err("HT Clock should be on\n"); 863 } 864 #endif /* defined (DEBUG) */ 865 866 } else { 867 clkreq = 0; 868 869 if (bus->clkstate == CLK_PENDING) { 870 /* Cancel CA-only interrupt filter */ 871 devctl = brcmf_sdiod_readb(bus->sdiodev, 872 SBSDIO_DEVICE_CTL, &err); 873 devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; 874 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL, 875 devctl, &err); 876 } 877 878 bus->clkstate = CLK_SDONLY; 879 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 880 clkreq, &err); 881 brcmf_dbg(SDIO, "CLKCTL: turned OFF\n"); 882 if (err) { 883 brcmf_err("Failed access turning clock off: %d\n", 884 err); 885 return -EBADE; 886 } 887 } 888 return 0; 889 } 890 891 /* Change idle/active SD state */ 892 static int brcmf_sdio_sdclk(struct brcmf_sdio *bus, bool on) 893 { 894 brcmf_dbg(SDIO, "Enter\n"); 895 896 if (on) 897 bus->clkstate = CLK_SDONLY; 898 else 899 bus->clkstate = CLK_NONE; 900 901 return 0; 902 } 903 904 /* Transition SD and backplane clock readiness */ 905 static int brcmf_sdio_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) 906 { 907 #ifdef DEBUG 908 uint oldstate = bus->clkstate; 909 #endif /* DEBUG */ 910 911 brcmf_dbg(SDIO, "Enter\n"); 912 913 /* Early exit if we're already there */ 914 if (bus->clkstate == target) 915 return 0; 916 917 switch (target) { 918 case CLK_AVAIL: 919 /* Make sure SD clock is available */ 920 if (bus->clkstate == CLK_NONE) 921 brcmf_sdio_sdclk(bus, true); 922 /* Now request HT Avail on the backplane */ 923 brcmf_sdio_htclk(bus, true, pendok); 924 break; 925 926 case CLK_SDONLY: 927 /* Remove HT request, or bring up SD clock */ 928 if (bus->clkstate == CLK_NONE) 929 brcmf_sdio_sdclk(bus, true); 930 else if (bus->clkstate == CLK_AVAIL) 931 brcmf_sdio_htclk(bus, false, false); 932 else 933 brcmf_err("request for %d -> %d\n", 934 bus->clkstate, target); 935 break; 936 937 case CLK_NONE: 938 /* Make sure to remove HT request */ 939 if (bus->clkstate == CLK_AVAIL) 940 brcmf_sdio_htclk(bus, false, false); 941 /* Now remove the SD clock */ 942 brcmf_sdio_sdclk(bus, false); 943 break; 944 } 945 #ifdef DEBUG 946 brcmf_dbg(SDIO, "%d -> %d\n", oldstate, bus->clkstate); 947 #endif /* DEBUG */ 948 949 return 0; 950 } 951 952 static int 953 brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) 954 { 955 int err = 0; 956 u8 clkcsr; 957 958 brcmf_dbg(SDIO, "Enter: request %s currently %s\n", 959 (sleep ? "SLEEP" : "WAKE"), 960 (bus->sleeping ? "SLEEP" : "WAKE")); 961 962 /* If SR is enabled control bus state with KSO */ 963 if (bus->sr_enabled) { 964 /* Done if we're already in the requested state */ 965 if (sleep == bus->sleeping) 966 goto end; 967 968 /* Going to sleep */ 969 if (sleep) { 970 clkcsr = brcmf_sdiod_readb(bus->sdiodev, 971 SBSDIO_FUNC1_CHIPCLKCSR, 972 &err); 973 if ((clkcsr & SBSDIO_CSR_MASK) == 0) { 974 brcmf_dbg(SDIO, "no clock, set ALP\n"); 975 brcmf_sdiod_writeb(bus->sdiodev, 976 SBSDIO_FUNC1_CHIPCLKCSR, 977 SBSDIO_ALP_AVAIL_REQ, &err); 978 } 979 err = brcmf_sdio_kso_control(bus, false); 980 } else { 981 err = brcmf_sdio_kso_control(bus, true); 982 } 983 if (err) { 984 brcmf_err("error while changing bus sleep state %d\n", 985 err); 986 goto done; 987 } 988 } 989 990 end: 991 /* control clocks */ 992 if (sleep) { 993 if (!bus->sr_enabled) 994 brcmf_sdio_clkctl(bus, CLK_NONE, pendok); 995 } else { 996 brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok); 997 brcmf_sdio_wd_timer(bus, true); 998 } 999 bus->sleeping = sleep; 1000 brcmf_dbg(SDIO, "new state %s\n", 1001 (sleep ? "SLEEP" : "WAKE")); 1002 done: 1003 brcmf_dbg(SDIO, "Exit: err=%d\n", err); 1004 return err; 1005 1006 } 1007 1008 #ifdef DEBUG 1009 static inline bool brcmf_sdio_valid_shared_address(u32 addr) 1010 { 1011 return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff)); 1012 } 1013 1014 static int brcmf_sdio_readshared(struct brcmf_sdio *bus, 1015 struct sdpcm_shared *sh) 1016 { 1017 u32 addr = 0; 1018 int rv; 1019 u32 shaddr = 0; 1020 struct sdpcm_shared_le sh_le; 1021 __le32 addr_le; 1022 1023 sdio_claim_host(bus->sdiodev->func1); 1024 brcmf_sdio_bus_sleep(bus, false, false); 1025 1026 /* 1027 * Read last word in socram to determine 1028 * address of sdpcm_shared structure 1029 */ 1030 shaddr = bus->ci->rambase + bus->ci->ramsize - 4; 1031 if (!bus->ci->rambase && brcmf_chip_sr_capable(bus->ci)) 1032 shaddr -= bus->ci->srsize; 1033 rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, 1034 (u8 *)&addr_le, 4); 1035 if (rv < 0) 1036 goto fail; 1037 1038 /* 1039 * Check if addr is valid. 1040 * NVRAM length at the end of memory should have been overwritten. 1041 */ 1042 addr = le32_to_cpu(addr_le); 1043 if (!brcmf_sdio_valid_shared_address(addr)) { 1044 brcmf_err("invalid sdpcm_shared address 0x%08X\n", addr); 1045 rv = -EINVAL; 1046 goto fail; 1047 } 1048 1049 brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr); 1050 1051 /* Read hndrte_shared structure */ 1052 rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, 1053 sizeof(struct sdpcm_shared_le)); 1054 if (rv < 0) 1055 goto fail; 1056 1057 sdio_release_host(bus->sdiodev->func1); 1058 1059 /* Endianness */ 1060 sh->flags = le32_to_cpu(sh_le.flags); 1061 sh->trap_addr = le32_to_cpu(sh_le.trap_addr); 1062 sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr); 1063 sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr); 1064 sh->assert_line = le32_to_cpu(sh_le.assert_line); 1065 sh->console_addr = le32_to_cpu(sh_le.console_addr); 1066 sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr); 1067 1068 if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) { 1069 brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n", 1070 SDPCM_SHARED_VERSION, 1071 sh->flags & SDPCM_SHARED_VERSION_MASK); 1072 return -EPROTO; 1073 } 1074 return 0; 1075 1076 fail: 1077 brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n", 1078 rv, addr); 1079 sdio_release_host(bus->sdiodev->func1); 1080 return rv; 1081 } 1082 1083 static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus) 1084 { 1085 struct sdpcm_shared sh; 1086 1087 if (brcmf_sdio_readshared(bus, &sh) == 0) 1088 bus->console_addr = sh.console_addr; 1089 } 1090 #else 1091 static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus) 1092 { 1093 } 1094 #endif /* DEBUG */ 1095 1096 static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus) 1097 { 1098 struct brcmf_sdio_dev *sdiod = bus->sdiodev; 1099 struct brcmf_core *core = bus->sdio_core; 1100 u32 intstatus = 0; 1101 u32 hmb_data; 1102 u8 fcbits; 1103 int ret; 1104 1105 brcmf_dbg(SDIO, "Enter\n"); 1106 1107 /* Read mailbox data and ack that we did so */ 1108 hmb_data = brcmf_sdiod_readl(sdiod, 1109 core->base + SD_REG(tohostmailboxdata), 1110 &ret); 1111 1112 if (!ret) 1113 brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailbox), 1114 SMB_INT_ACK, &ret); 1115 1116 bus->sdcnt.f1regdata += 2; 1117 1118 /* dongle indicates the firmware has halted/crashed */ 1119 if (hmb_data & HMB_DATA_FWHALT) { 1120 brcmf_dbg(SDIO, "mailbox indicates firmware halted\n"); 1121 brcmf_fw_crashed(&sdiod->func1->dev); 1122 } 1123 1124 /* Dongle recomposed rx frames, accept them again */ 1125 if (hmb_data & HMB_DATA_NAKHANDLED) { 1126 brcmf_dbg(SDIO, "Dongle reports NAK handled, expect rtx of %d\n", 1127 bus->rx_seq); 1128 if (!bus->rxskip) 1129 brcmf_err("unexpected NAKHANDLED!\n"); 1130 1131 bus->rxskip = false; 1132 intstatus |= I_HMB_FRAME_IND; 1133 } 1134 1135 /* 1136 * DEVREADY does not occur with gSPI. 1137 */ 1138 if (hmb_data & (HMB_DATA_DEVREADY | HMB_DATA_FWREADY)) { 1139 bus->sdpcm_ver = 1140 (hmb_data & HMB_DATA_VERSION_MASK) >> 1141 HMB_DATA_VERSION_SHIFT; 1142 if (bus->sdpcm_ver != SDPCM_PROT_VERSION) 1143 brcmf_err("Version mismatch, dongle reports %d, " 1144 "expecting %d\n", 1145 bus->sdpcm_ver, SDPCM_PROT_VERSION); 1146 else 1147 brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n", 1148 bus->sdpcm_ver); 1149 1150 /* 1151 * Retrieve console state address now that firmware should have 1152 * updated it. 1153 */ 1154 brcmf_sdio_get_console_addr(bus); 1155 } 1156 1157 /* 1158 * Flow Control has been moved into the RX headers and this out of band 1159 * method isn't used any more. 1160 * remaining backward compatible with older dongles. 1161 */ 1162 if (hmb_data & HMB_DATA_FC) { 1163 fcbits = (hmb_data & HMB_DATA_FCDATA_MASK) >> 1164 HMB_DATA_FCDATA_SHIFT; 1165 1166 if (fcbits & ~bus->flowcontrol) 1167 bus->sdcnt.fc_xoff++; 1168 1169 if (bus->flowcontrol & ~fcbits) 1170 bus->sdcnt.fc_xon++; 1171 1172 bus->sdcnt.fc_rcvd++; 1173 bus->flowcontrol = fcbits; 1174 } 1175 1176 /* Shouldn't be any others */ 1177 if (hmb_data & ~(HMB_DATA_DEVREADY | 1178 HMB_DATA_NAKHANDLED | 1179 HMB_DATA_FC | 1180 HMB_DATA_FWREADY | 1181 HMB_DATA_FWHALT | 1182 HMB_DATA_FCDATA_MASK | HMB_DATA_VERSION_MASK)) 1183 brcmf_err("Unknown mailbox data content: 0x%02x\n", 1184 hmb_data); 1185 1186 return intstatus; 1187 } 1188 1189 static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) 1190 { 1191 struct brcmf_sdio_dev *sdiod = bus->sdiodev; 1192 struct brcmf_core *core = bus->sdio_core; 1193 uint retries = 0; 1194 u16 lastrbc; 1195 u8 hi, lo; 1196 int err; 1197 1198 brcmf_err("%sterminate frame%s\n", 1199 abort ? "abort command, " : "", 1200 rtx ? ", send NAK" : ""); 1201 1202 if (abort) 1203 brcmf_sdiod_abort(bus->sdiodev, bus->sdiodev->func2); 1204 1205 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM, 1206 &err); 1207 bus->sdcnt.f1regdata++; 1208 1209 /* Wait until the packet has been flushed (device/FIFO stable) */ 1210 for (lastrbc = retries = 0xffff; retries > 0; retries--) { 1211 hi = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCHI, 1212 &err); 1213 lo = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCLO, 1214 &err); 1215 bus->sdcnt.f1regdata += 2; 1216 1217 if ((hi == 0) && (lo == 0)) 1218 break; 1219 1220 if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) { 1221 brcmf_err("count growing: last 0x%04x now 0x%04x\n", 1222 lastrbc, (hi << 8) + lo); 1223 } 1224 lastrbc = (hi << 8) + lo; 1225 } 1226 1227 if (!retries) 1228 brcmf_err("count never zeroed: last 0x%04x\n", lastrbc); 1229 else 1230 brcmf_dbg(SDIO, "flush took %d iterations\n", 0xffff - retries); 1231 1232 if (rtx) { 1233 bus->sdcnt.rxrtx++; 1234 brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailbox), 1235 SMB_NAK, &err); 1236 1237 bus->sdcnt.f1regdata++; 1238 if (err == 0) 1239 bus->rxskip = true; 1240 } 1241 1242 /* Clear partial in any case */ 1243 bus->cur_read.len = 0; 1244 } 1245 1246 static void brcmf_sdio_txfail(struct brcmf_sdio *bus) 1247 { 1248 struct brcmf_sdio_dev *sdiodev = bus->sdiodev; 1249 u8 i, hi, lo; 1250 1251 /* On failure, abort the command and terminate the frame */ 1252 brcmf_err("sdio error, abort command and terminate frame\n"); 1253 bus->sdcnt.tx_sderrs++; 1254 1255 brcmf_sdiod_abort(sdiodev, sdiodev->func2); 1256 brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL); 1257 bus->sdcnt.f1regdata++; 1258 1259 for (i = 0; i < 3; i++) { 1260 hi = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL); 1261 lo = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL); 1262 bus->sdcnt.f1regdata += 2; 1263 if ((hi == 0) && (lo == 0)) 1264 break; 1265 } 1266 } 1267 1268 /* return total length of buffer chain */ 1269 static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus) 1270 { 1271 struct sk_buff *p; 1272 uint total; 1273 1274 total = 0; 1275 skb_queue_walk(&bus->glom, p) 1276 total += p->len; 1277 return total; 1278 } 1279 1280 static void brcmf_sdio_free_glom(struct brcmf_sdio *bus) 1281 { 1282 struct sk_buff *cur, *next; 1283 1284 skb_queue_walk_safe(&bus->glom, cur, next) { 1285 skb_unlink(cur, &bus->glom); 1286 brcmu_pkt_buf_free_skb(cur); 1287 } 1288 } 1289 1290 /** 1291 * brcmfmac sdio bus specific header 1292 * This is the lowest layer header wrapped on the packets transmitted between 1293 * host and WiFi dongle which contains information needed for SDIO core and 1294 * firmware 1295 * 1296 * It consists of 3 parts: hardware header, hardware extension header and 1297 * software header 1298 * hardware header (frame tag) - 4 bytes 1299 * Byte 0~1: Frame length 1300 * Byte 2~3: Checksum, bit-wise inverse of frame length 1301 * hardware extension header - 8 bytes 1302 * Tx glom mode only, N/A for Rx or normal Tx 1303 * Byte 0~1: Packet length excluding hw frame tag 1304 * Byte 2: Reserved 1305 * Byte 3: Frame flags, bit 0: last frame indication 1306 * Byte 4~5: Reserved 1307 * Byte 6~7: Tail padding length 1308 * software header - 8 bytes 1309 * Byte 0: Rx/Tx sequence number 1310 * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag 1311 * Byte 2: Length of next data frame, reserved for Tx 1312 * Byte 3: Data offset 1313 * Byte 4: Flow control bits, reserved for Tx 1314 * Byte 5: Maximum Sequence number allowed by firmware for Tx, N/A for Tx packet 1315 * Byte 6~7: Reserved 1316 */ 1317 #define SDPCM_HWHDR_LEN 4 1318 #define SDPCM_HWEXT_LEN 8 1319 #define SDPCM_SWHDR_LEN 8 1320 #define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN) 1321 /* software header */ 1322 #define SDPCM_SEQ_MASK 0x000000ff 1323 #define SDPCM_SEQ_WRAP 256 1324 #define SDPCM_CHANNEL_MASK 0x00000f00 1325 #define SDPCM_CHANNEL_SHIFT 8 1326 #define SDPCM_CONTROL_CHANNEL 0 /* Control */ 1327 #define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication */ 1328 #define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv */ 1329 #define SDPCM_GLOM_CHANNEL 3 /* Coalesced packets */ 1330 #define SDPCM_TEST_CHANNEL 15 /* Test/debug packets */ 1331 #define SDPCM_GLOMDESC(p) (((u8 *)p)[1] & 0x80) 1332 #define SDPCM_NEXTLEN_MASK 0x00ff0000 1333 #define SDPCM_NEXTLEN_SHIFT 16 1334 #define SDPCM_DOFFSET_MASK 0xff000000 1335 #define SDPCM_DOFFSET_SHIFT 24 1336 #define SDPCM_FCMASK_MASK 0x000000ff 1337 #define SDPCM_WINDOW_MASK 0x0000ff00 1338 #define SDPCM_WINDOW_SHIFT 8 1339 1340 static inline u8 brcmf_sdio_getdatoffset(u8 *swheader) 1341 { 1342 u32 hdrvalue; 1343 hdrvalue = *(u32 *)swheader; 1344 return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT); 1345 } 1346 1347 static inline bool brcmf_sdio_fromevntchan(u8 *swheader) 1348 { 1349 u32 hdrvalue; 1350 u8 ret; 1351 1352 hdrvalue = *(u32 *)swheader; 1353 ret = (u8)((hdrvalue & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT); 1354 1355 return (ret == SDPCM_EVENT_CHANNEL); 1356 } 1357 1358 static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, 1359 struct brcmf_sdio_hdrinfo *rd, 1360 enum brcmf_sdio_frmtype type) 1361 { 1362 u16 len, checksum; 1363 u8 rx_seq, fc, tx_seq_max; 1364 u32 swheader; 1365 1366 trace_brcmf_sdpcm_hdr(SDPCM_RX, header); 1367 1368 /* hw header */ 1369 len = get_unaligned_le16(header); 1370 checksum = get_unaligned_le16(header + sizeof(u16)); 1371 /* All zero means no more to read */ 1372 if (!(len | checksum)) { 1373 bus->rxpending = false; 1374 return -ENODATA; 1375 } 1376 if ((u16)(~(len ^ checksum))) { 1377 brcmf_err("HW header checksum error\n"); 1378 bus->sdcnt.rx_badhdr++; 1379 brcmf_sdio_rxfail(bus, false, false); 1380 return -EIO; 1381 } 1382 if (len < SDPCM_HDRLEN) { 1383 brcmf_err("HW header length error\n"); 1384 return -EPROTO; 1385 } 1386 if (type == BRCMF_SDIO_FT_SUPER && 1387 (roundup(len, bus->blocksize) != rd->len)) { 1388 brcmf_err("HW superframe header length error\n"); 1389 return -EPROTO; 1390 } 1391 if (type == BRCMF_SDIO_FT_SUB && len > rd->len) { 1392 brcmf_err("HW subframe header length error\n"); 1393 return -EPROTO; 1394 } 1395 rd->len = len; 1396 1397 /* software header */ 1398 header += SDPCM_HWHDR_LEN; 1399 swheader = le32_to_cpu(*(__le32 *)header); 1400 if (type == BRCMF_SDIO_FT_SUPER && SDPCM_GLOMDESC(header)) { 1401 brcmf_err("Glom descriptor found in superframe head\n"); 1402 rd->len = 0; 1403 return -EINVAL; 1404 } 1405 rx_seq = (u8)(swheader & SDPCM_SEQ_MASK); 1406 rd->channel = (swheader & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT; 1407 if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL && 1408 type != BRCMF_SDIO_FT_SUPER) { 1409 brcmf_err("HW header length too long\n"); 1410 bus->sdcnt.rx_toolong++; 1411 brcmf_sdio_rxfail(bus, false, false); 1412 rd->len = 0; 1413 return -EPROTO; 1414 } 1415 if (type == BRCMF_SDIO_FT_SUPER && rd->channel != SDPCM_GLOM_CHANNEL) { 1416 brcmf_err("Wrong channel for superframe\n"); 1417 rd->len = 0; 1418 return -EINVAL; 1419 } 1420 if (type == BRCMF_SDIO_FT_SUB && rd->channel != SDPCM_DATA_CHANNEL && 1421 rd->channel != SDPCM_EVENT_CHANNEL) { 1422 brcmf_err("Wrong channel for subframe\n"); 1423 rd->len = 0; 1424 return -EINVAL; 1425 } 1426 rd->dat_offset = brcmf_sdio_getdatoffset(header); 1427 if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) { 1428 brcmf_err("seq %d: bad data offset\n", rx_seq); 1429 bus->sdcnt.rx_badhdr++; 1430 brcmf_sdio_rxfail(bus, false, false); 1431 rd->len = 0; 1432 return -ENXIO; 1433 } 1434 if (rd->seq_num != rx_seq) { 1435 brcmf_dbg(SDIO, "seq %d, expected %d\n", rx_seq, rd->seq_num); 1436 bus->sdcnt.rx_badseq++; 1437 rd->seq_num = rx_seq; 1438 } 1439 /* no need to check the reset for subframe */ 1440 if (type == BRCMF_SDIO_FT_SUB) 1441 return 0; 1442 rd->len_nxtfrm = (swheader & SDPCM_NEXTLEN_MASK) >> SDPCM_NEXTLEN_SHIFT; 1443 if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) { 1444 /* only warm for NON glom packet */ 1445 if (rd->channel != SDPCM_GLOM_CHANNEL) 1446 brcmf_err("seq %d: next length error\n", rx_seq); 1447 rd->len_nxtfrm = 0; 1448 } 1449 swheader = le32_to_cpu(*(__le32 *)(header + 4)); 1450 fc = swheader & SDPCM_FCMASK_MASK; 1451 if (bus->flowcontrol != fc) { 1452 if (~bus->flowcontrol & fc) 1453 bus->sdcnt.fc_xoff++; 1454 if (bus->flowcontrol & ~fc) 1455 bus->sdcnt.fc_xon++; 1456 bus->sdcnt.fc_rcvd++; 1457 bus->flowcontrol = fc; 1458 } 1459 tx_seq_max = (swheader & SDPCM_WINDOW_MASK) >> SDPCM_WINDOW_SHIFT; 1460 if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) { 1461 brcmf_err("seq %d: max tx seq number error\n", rx_seq); 1462 tx_seq_max = bus->tx_seq + 2; 1463 } 1464 bus->tx_max = tx_seq_max; 1465 1466 return 0; 1467 } 1468 1469 static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length) 1470 { 1471 *(__le16 *)header = cpu_to_le16(frm_length); 1472 *(((__le16 *)header) + 1) = cpu_to_le16(~frm_length); 1473 } 1474 1475 static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header, 1476 struct brcmf_sdio_hdrinfo *hd_info) 1477 { 1478 u32 hdrval; 1479 u8 hdr_offset; 1480 1481 brcmf_sdio_update_hwhdr(header, hd_info->len); 1482 hdr_offset = SDPCM_HWHDR_LEN; 1483 1484 if (bus->txglom) { 1485 hdrval = (hd_info->len - hdr_offset) | (hd_info->lastfrm << 24); 1486 *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); 1487 hdrval = (u16)hd_info->tail_pad << 16; 1488 *(((__le32 *)(header + hdr_offset)) + 1) = cpu_to_le32(hdrval); 1489 hdr_offset += SDPCM_HWEXT_LEN; 1490 } 1491 1492 hdrval = hd_info->seq_num; 1493 hdrval |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) & 1494 SDPCM_CHANNEL_MASK; 1495 hdrval |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) & 1496 SDPCM_DOFFSET_MASK; 1497 *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); 1498 *(((__le32 *)(header + hdr_offset)) + 1) = 0; 1499 trace_brcmf_sdpcm_hdr(SDPCM_TX + !!(bus->txglom), header); 1500 } 1501 1502 static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq) 1503 { 1504 u16 dlen, totlen; 1505 u8 *dptr, num = 0; 1506 u16 sublen; 1507 struct sk_buff *pfirst, *pnext; 1508 1509 int errcode; 1510 u8 doff; 1511 1512 struct brcmf_sdio_hdrinfo rd_new; 1513 1514 /* If packets, issue read(s) and send up packet chain */ 1515 /* Return sequence numbers consumed? */ 1516 1517 brcmf_dbg(SDIO, "start: glomd %p glom %p\n", 1518 bus->glomd, skb_peek(&bus->glom)); 1519 1520 /* If there's a descriptor, generate the packet chain */ 1521 if (bus->glomd) { 1522 pfirst = pnext = NULL; 1523 dlen = (u16) (bus->glomd->len); 1524 dptr = bus->glomd->data; 1525 if (!dlen || (dlen & 1)) { 1526 brcmf_err("bad glomd len(%d), ignore descriptor\n", 1527 dlen); 1528 dlen = 0; 1529 } 1530 1531 for (totlen = num = 0; dlen; num++) { 1532 /* Get (and move past) next length */ 1533 sublen = get_unaligned_le16(dptr); 1534 dlen -= sizeof(u16); 1535 dptr += sizeof(u16); 1536 if ((sublen < SDPCM_HDRLEN) || 1537 ((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) { 1538 brcmf_err("descriptor len %d bad: %d\n", 1539 num, sublen); 1540 pnext = NULL; 1541 break; 1542 } 1543 if (sublen % bus->sgentry_align) { 1544 brcmf_err("sublen %d not multiple of %d\n", 1545 sublen, bus->sgentry_align); 1546 } 1547 totlen += sublen; 1548 1549 /* For last frame, adjust read len so total 1550 is a block multiple */ 1551 if (!dlen) { 1552 sublen += 1553 (roundup(totlen, bus->blocksize) - totlen); 1554 totlen = roundup(totlen, bus->blocksize); 1555 } 1556 1557 /* Allocate/chain packet for next subframe */ 1558 pnext = brcmu_pkt_buf_get_skb(sublen + bus->sgentry_align); 1559 if (pnext == NULL) { 1560 brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n", 1561 num, sublen); 1562 break; 1563 } 1564 skb_queue_tail(&bus->glom, pnext); 1565 1566 /* Adhere to start alignment requirements */ 1567 pkt_align(pnext, sublen, bus->sgentry_align); 1568 } 1569 1570 /* If all allocations succeeded, save packet chain 1571 in bus structure */ 1572 if (pnext) { 1573 brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n", 1574 totlen, num); 1575 if (BRCMF_GLOM_ON() && bus->cur_read.len && 1576 totlen != bus->cur_read.len) { 1577 brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n", 1578 bus->cur_read.len, totlen, rxseq); 1579 } 1580 pfirst = pnext = NULL; 1581 } else { 1582 brcmf_sdio_free_glom(bus); 1583 num = 0; 1584 } 1585 1586 /* Done with descriptor packet */ 1587 brcmu_pkt_buf_free_skb(bus->glomd); 1588 bus->glomd = NULL; 1589 bus->cur_read.len = 0; 1590 } 1591 1592 /* Ok -- either we just generated a packet chain, 1593 or had one from before */ 1594 if (!skb_queue_empty(&bus->glom)) { 1595 if (BRCMF_GLOM_ON()) { 1596 brcmf_dbg(GLOM, "try superframe read, packet chain:\n"); 1597 skb_queue_walk(&bus->glom, pnext) { 1598 brcmf_dbg(GLOM, " %p: %p len 0x%04x (%d)\n", 1599 pnext, (u8 *) (pnext->data), 1600 pnext->len, pnext->len); 1601 } 1602 } 1603 1604 pfirst = skb_peek(&bus->glom); 1605 dlen = (u16) brcmf_sdio_glom_len(bus); 1606 1607 /* Do an SDIO read for the superframe. Configurable iovar to 1608 * read directly into the chained packet, or allocate a large 1609 * packet and and copy into the chain. 1610 */ 1611 sdio_claim_host(bus->sdiodev->func1); 1612 errcode = brcmf_sdiod_recv_chain(bus->sdiodev, 1613 &bus->glom, dlen); 1614 sdio_release_host(bus->sdiodev->func1); 1615 bus->sdcnt.f2rxdata++; 1616 1617 /* On failure, kill the superframe */ 1618 if (errcode < 0) { 1619 brcmf_err("glom read of %d bytes failed: %d\n", 1620 dlen, errcode); 1621 1622 sdio_claim_host(bus->sdiodev->func1); 1623 brcmf_sdio_rxfail(bus, true, false); 1624 bus->sdcnt.rxglomfail++; 1625 brcmf_sdio_free_glom(bus); 1626 sdio_release_host(bus->sdiodev->func1); 1627 return 0; 1628 } 1629 1630 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), 1631 pfirst->data, min_t(int, pfirst->len, 48), 1632 "SUPERFRAME:\n"); 1633 1634 rd_new.seq_num = rxseq; 1635 rd_new.len = dlen; 1636 sdio_claim_host(bus->sdiodev->func1); 1637 errcode = brcmf_sdio_hdparse(bus, pfirst->data, &rd_new, 1638 BRCMF_SDIO_FT_SUPER); 1639 sdio_release_host(bus->sdiodev->func1); 1640 bus->cur_read.len = rd_new.len_nxtfrm << 4; 1641 1642 /* Remove superframe header, remember offset */ 1643 skb_pull(pfirst, rd_new.dat_offset); 1644 num = 0; 1645 1646 /* Validate all the subframe headers */ 1647 skb_queue_walk(&bus->glom, pnext) { 1648 /* leave when invalid subframe is found */ 1649 if (errcode) 1650 break; 1651 1652 rd_new.len = pnext->len; 1653 rd_new.seq_num = rxseq++; 1654 sdio_claim_host(bus->sdiodev->func1); 1655 errcode = brcmf_sdio_hdparse(bus, pnext->data, &rd_new, 1656 BRCMF_SDIO_FT_SUB); 1657 sdio_release_host(bus->sdiodev->func1); 1658 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), 1659 pnext->data, 32, "subframe:\n"); 1660 1661 num++; 1662 } 1663 1664 if (errcode) { 1665 /* Terminate frame on error */ 1666 sdio_claim_host(bus->sdiodev->func1); 1667 brcmf_sdio_rxfail(bus, true, false); 1668 bus->sdcnt.rxglomfail++; 1669 brcmf_sdio_free_glom(bus); 1670 sdio_release_host(bus->sdiodev->func1); 1671 bus->cur_read.len = 0; 1672 return 0; 1673 } 1674 1675 /* Basic SD framing looks ok - process each packet (header) */ 1676 1677 skb_queue_walk_safe(&bus->glom, pfirst, pnext) { 1678 dptr = (u8 *) (pfirst->data); 1679 sublen = get_unaligned_le16(dptr); 1680 doff = brcmf_sdio_getdatoffset(&dptr[SDPCM_HWHDR_LEN]); 1681 1682 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(), 1683 dptr, pfirst->len, 1684 "Rx Subframe Data:\n"); 1685 1686 __skb_trim(pfirst, sublen); 1687 skb_pull(pfirst, doff); 1688 1689 if (pfirst->len == 0) { 1690 skb_unlink(pfirst, &bus->glom); 1691 brcmu_pkt_buf_free_skb(pfirst); 1692 continue; 1693 } 1694 1695 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), 1696 pfirst->data, 1697 min_t(int, pfirst->len, 32), 1698 "subframe %d to stack, %p (%p/%d) nxt/lnk %p/%p\n", 1699 bus->glom.qlen, pfirst, pfirst->data, 1700 pfirst->len, pfirst->next, 1701 pfirst->prev); 1702 skb_unlink(pfirst, &bus->glom); 1703 if (brcmf_sdio_fromevntchan(&dptr[SDPCM_HWHDR_LEN])) 1704 brcmf_rx_event(bus->sdiodev->dev, pfirst); 1705 else 1706 brcmf_rx_frame(bus->sdiodev->dev, pfirst, 1707 false, false); 1708 bus->sdcnt.rxglompkts++; 1709 } 1710 1711 bus->sdcnt.rxglomframes++; 1712 } 1713 return num; 1714 } 1715 1716 static int brcmf_sdio_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition, 1717 bool *pending) 1718 { 1719 DECLARE_WAITQUEUE(wait, current); 1720 int timeout = DCMD_RESP_TIMEOUT; 1721 1722 /* Wait until control frame is available */ 1723 add_wait_queue(&bus->dcmd_resp_wait, &wait); 1724 set_current_state(TASK_INTERRUPTIBLE); 1725 1726 while (!(*condition) && (!signal_pending(current) && timeout)) 1727 timeout = schedule_timeout(timeout); 1728 1729 if (signal_pending(current)) 1730 *pending = true; 1731 1732 set_current_state(TASK_RUNNING); 1733 remove_wait_queue(&bus->dcmd_resp_wait, &wait); 1734 1735 return timeout; 1736 } 1737 1738 static int brcmf_sdio_dcmd_resp_wake(struct brcmf_sdio *bus) 1739 { 1740 wake_up_interruptible(&bus->dcmd_resp_wait); 1741 1742 return 0; 1743 } 1744 static void 1745 brcmf_sdio_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) 1746 { 1747 uint rdlen, pad; 1748 u8 *buf = NULL, *rbuf; 1749 int sdret; 1750 1751 brcmf_dbg(SDIO, "Enter\n"); 1752 if (bus->rxblen) 1753 buf = vzalloc(bus->rxblen); 1754 if (!buf) 1755 goto done; 1756 1757 rbuf = bus->rxbuf; 1758 pad = ((unsigned long)rbuf % bus->head_align); 1759 if (pad) 1760 rbuf += (bus->head_align - pad); 1761 1762 /* Copy the already-read portion over */ 1763 memcpy(buf, hdr, BRCMF_FIRSTREAD); 1764 if (len <= BRCMF_FIRSTREAD) 1765 goto gotpkt; 1766 1767 /* Raise rdlen to next SDIO block to avoid tail command */ 1768 rdlen = len - BRCMF_FIRSTREAD; 1769 if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) { 1770 pad = bus->blocksize - (rdlen % bus->blocksize); 1771 if ((pad <= bus->roundup) && (pad < bus->blocksize) && 1772 ((len + pad) < bus->sdiodev->bus_if->maxctl)) 1773 rdlen += pad; 1774 } else if (rdlen % bus->head_align) { 1775 rdlen += bus->head_align - (rdlen % bus->head_align); 1776 } 1777 1778 /* Drop if the read is too big or it exceeds our maximum */ 1779 if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) { 1780 brcmf_err("%d-byte control read exceeds %d-byte buffer\n", 1781 rdlen, bus->sdiodev->bus_if->maxctl); 1782 brcmf_sdio_rxfail(bus, false, false); 1783 goto done; 1784 } 1785 1786 if ((len - doff) > bus->sdiodev->bus_if->maxctl) { 1787 brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n", 1788 len, len - doff, bus->sdiodev->bus_if->maxctl); 1789 bus->sdcnt.rx_toolong++; 1790 brcmf_sdio_rxfail(bus, false, false); 1791 goto done; 1792 } 1793 1794 /* Read remain of frame body */ 1795 sdret = brcmf_sdiod_recv_buf(bus->sdiodev, rbuf, rdlen); 1796 bus->sdcnt.f2rxdata++; 1797 1798 /* Control frame failures need retransmission */ 1799 if (sdret < 0) { 1800 brcmf_err("read %d control bytes failed: %d\n", 1801 rdlen, sdret); 1802 bus->sdcnt.rxc_errors++; 1803 brcmf_sdio_rxfail(bus, true, true); 1804 goto done; 1805 } else 1806 memcpy(buf + BRCMF_FIRSTREAD, rbuf, rdlen); 1807 1808 gotpkt: 1809 1810 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(), 1811 buf, len, "RxCtrl:\n"); 1812 1813 /* Point to valid data and indicate its length */ 1814 spin_lock_bh(&bus->rxctl_lock); 1815 if (bus->rxctl) { 1816 brcmf_err("last control frame is being processed.\n"); 1817 spin_unlock_bh(&bus->rxctl_lock); 1818 vfree(buf); 1819 goto done; 1820 } 1821 bus->rxctl = buf + doff; 1822 bus->rxctl_orig = buf; 1823 bus->rxlen = len - doff; 1824 spin_unlock_bh(&bus->rxctl_lock); 1825 1826 done: 1827 /* Awake any waiters */ 1828 brcmf_sdio_dcmd_resp_wake(bus); 1829 } 1830 1831 /* Pad read to blocksize for efficiency */ 1832 static void brcmf_sdio_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen) 1833 { 1834 if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) { 1835 *pad = bus->blocksize - (*rdlen % bus->blocksize); 1836 if (*pad <= bus->roundup && *pad < bus->blocksize && 1837 *rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ) 1838 *rdlen += *pad; 1839 } else if (*rdlen % bus->head_align) { 1840 *rdlen += bus->head_align - (*rdlen % bus->head_align); 1841 } 1842 } 1843 1844 static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) 1845 { 1846 struct sk_buff *pkt; /* Packet for event or data frames */ 1847 u16 pad; /* Number of pad bytes to read */ 1848 uint rxleft = 0; /* Remaining number of frames allowed */ 1849 int ret; /* Return code from calls */ 1850 uint rxcount = 0; /* Total frames read */ 1851 struct brcmf_sdio_hdrinfo *rd = &bus->cur_read, rd_new; 1852 u8 head_read = 0; 1853 1854 brcmf_dbg(SDIO, "Enter\n"); 1855 1856 /* Not finished unless we encounter no more frames indication */ 1857 bus->rxpending = true; 1858 1859 for (rd->seq_num = bus->rx_seq, rxleft = maxframes; 1860 !bus->rxskip && rxleft && bus->sdiodev->state == BRCMF_SDIOD_DATA; 1861 rd->seq_num++, rxleft--) { 1862 1863 /* Handle glomming separately */ 1864 if (bus->glomd || !skb_queue_empty(&bus->glom)) { 1865 u8 cnt; 1866 brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n", 1867 bus->glomd, skb_peek(&bus->glom)); 1868 cnt = brcmf_sdio_rxglom(bus, rd->seq_num); 1869 brcmf_dbg(GLOM, "rxglom returned %d\n", cnt); 1870 rd->seq_num += cnt - 1; 1871 rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1; 1872 continue; 1873 } 1874 1875 rd->len_left = rd->len; 1876 /* read header first for unknow frame length */ 1877 sdio_claim_host(bus->sdiodev->func1); 1878 if (!rd->len) { 1879 ret = brcmf_sdiod_recv_buf(bus->sdiodev, 1880 bus->rxhdr, BRCMF_FIRSTREAD); 1881 bus->sdcnt.f2rxhdrs++; 1882 if (ret < 0) { 1883 brcmf_err("RXHEADER FAILED: %d\n", 1884 ret); 1885 bus->sdcnt.rx_hdrfail++; 1886 brcmf_sdio_rxfail(bus, true, true); 1887 sdio_release_host(bus->sdiodev->func1); 1888 continue; 1889 } 1890 1891 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() || BRCMF_HDRS_ON(), 1892 bus->rxhdr, SDPCM_HDRLEN, 1893 "RxHdr:\n"); 1894 1895 if (brcmf_sdio_hdparse(bus, bus->rxhdr, rd, 1896 BRCMF_SDIO_FT_NORMAL)) { 1897 sdio_release_host(bus->sdiodev->func1); 1898 if (!bus->rxpending) 1899 break; 1900 else 1901 continue; 1902 } 1903 1904 if (rd->channel == SDPCM_CONTROL_CHANNEL) { 1905 brcmf_sdio_read_control(bus, bus->rxhdr, 1906 rd->len, 1907 rd->dat_offset); 1908 /* prepare the descriptor for the next read */ 1909 rd->len = rd->len_nxtfrm << 4; 1910 rd->len_nxtfrm = 0; 1911 /* treat all packet as event if we don't know */ 1912 rd->channel = SDPCM_EVENT_CHANNEL; 1913 sdio_release_host(bus->sdiodev->func1); 1914 continue; 1915 } 1916 rd->len_left = rd->len > BRCMF_FIRSTREAD ? 1917 rd->len - BRCMF_FIRSTREAD : 0; 1918 head_read = BRCMF_FIRSTREAD; 1919 } 1920 1921 brcmf_sdio_pad(bus, &pad, &rd->len_left); 1922 1923 pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read + 1924 bus->head_align); 1925 if (!pkt) { 1926 /* Give up on data, request rtx of events */ 1927 brcmf_err("brcmu_pkt_buf_get_skb failed\n"); 1928 brcmf_sdio_rxfail(bus, false, 1929 RETRYCHAN(rd->channel)); 1930 sdio_release_host(bus->sdiodev->func1); 1931 continue; 1932 } 1933 skb_pull(pkt, head_read); 1934 pkt_align(pkt, rd->len_left, bus->head_align); 1935 1936 ret = brcmf_sdiod_recv_pkt(bus->sdiodev, pkt); 1937 bus->sdcnt.f2rxdata++; 1938 sdio_release_host(bus->sdiodev->func1); 1939 1940 if (ret < 0) { 1941 brcmf_err("read %d bytes from channel %d failed: %d\n", 1942 rd->len, rd->channel, ret); 1943 brcmu_pkt_buf_free_skb(pkt); 1944 sdio_claim_host(bus->sdiodev->func1); 1945 brcmf_sdio_rxfail(bus, true, 1946 RETRYCHAN(rd->channel)); 1947 sdio_release_host(bus->sdiodev->func1); 1948 continue; 1949 } 1950 1951 if (head_read) { 1952 skb_push(pkt, head_read); 1953 memcpy(pkt->data, bus->rxhdr, head_read); 1954 head_read = 0; 1955 } else { 1956 memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN); 1957 rd_new.seq_num = rd->seq_num; 1958 sdio_claim_host(bus->sdiodev->func1); 1959 if (brcmf_sdio_hdparse(bus, bus->rxhdr, &rd_new, 1960 BRCMF_SDIO_FT_NORMAL)) { 1961 rd->len = 0; 1962 brcmf_sdio_rxfail(bus, true, true); 1963 sdio_release_host(bus->sdiodev->func1); 1964 brcmu_pkt_buf_free_skb(pkt); 1965 continue; 1966 } 1967 bus->sdcnt.rx_readahead_cnt++; 1968 if (rd->len != roundup(rd_new.len, 16)) { 1969 brcmf_err("frame length mismatch:read %d, should be %d\n", 1970 rd->len, 1971 roundup(rd_new.len, 16) >> 4); 1972 rd->len = 0; 1973 brcmf_sdio_rxfail(bus, true, true); 1974 sdio_release_host(bus->sdiodev->func1); 1975 brcmu_pkt_buf_free_skb(pkt); 1976 continue; 1977 } 1978 sdio_release_host(bus->sdiodev->func1); 1979 rd->len_nxtfrm = rd_new.len_nxtfrm; 1980 rd->channel = rd_new.channel; 1981 rd->dat_offset = rd_new.dat_offset; 1982 1983 brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && 1984 BRCMF_DATA_ON()) && 1985 BRCMF_HDRS_ON(), 1986 bus->rxhdr, SDPCM_HDRLEN, 1987 "RxHdr:\n"); 1988 1989 if (rd_new.channel == SDPCM_CONTROL_CHANNEL) { 1990 brcmf_err("readahead on control packet %d?\n", 1991 rd_new.seq_num); 1992 /* Force retry w/normal header read */ 1993 rd->len = 0; 1994 sdio_claim_host(bus->sdiodev->func1); 1995 brcmf_sdio_rxfail(bus, false, true); 1996 sdio_release_host(bus->sdiodev->func1); 1997 brcmu_pkt_buf_free_skb(pkt); 1998 continue; 1999 } 2000 } 2001 2002 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(), 2003 pkt->data, rd->len, "Rx Data:\n"); 2004 2005 /* Save superframe descriptor and allocate packet frame */ 2006 if (rd->channel == SDPCM_GLOM_CHANNEL) { 2007 if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_HWHDR_LEN])) { 2008 brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n", 2009 rd->len); 2010 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), 2011 pkt->data, rd->len, 2012 "Glom Data:\n"); 2013 __skb_trim(pkt, rd->len); 2014 skb_pull(pkt, SDPCM_HDRLEN); 2015 bus->glomd = pkt; 2016 } else { 2017 brcmf_err("%s: glom superframe w/o " 2018 "descriptor!\n", __func__); 2019 sdio_claim_host(bus->sdiodev->func1); 2020 brcmf_sdio_rxfail(bus, false, false); 2021 sdio_release_host(bus->sdiodev->func1); 2022 } 2023 /* prepare the descriptor for the next read */ 2024 rd->len = rd->len_nxtfrm << 4; 2025 rd->len_nxtfrm = 0; 2026 /* treat all packet as event if we don't know */ 2027 rd->channel = SDPCM_EVENT_CHANNEL; 2028 continue; 2029 } 2030 2031 /* Fill in packet len and prio, deliver upward */ 2032 __skb_trim(pkt, rd->len); 2033 skb_pull(pkt, rd->dat_offset); 2034 2035 if (pkt->len == 0) 2036 brcmu_pkt_buf_free_skb(pkt); 2037 else if (rd->channel == SDPCM_EVENT_CHANNEL) 2038 brcmf_rx_event(bus->sdiodev->dev, pkt); 2039 else 2040 brcmf_rx_frame(bus->sdiodev->dev, pkt, 2041 false, false); 2042 2043 /* prepare the descriptor for the next read */ 2044 rd->len = rd->len_nxtfrm << 4; 2045 rd->len_nxtfrm = 0; 2046 /* treat all packet as event if we don't know */ 2047 rd->channel = SDPCM_EVENT_CHANNEL; 2048 } 2049 2050 rxcount = maxframes - rxleft; 2051 /* Message if we hit the limit */ 2052 if (!rxleft) 2053 brcmf_dbg(DATA, "hit rx limit of %d frames\n", maxframes); 2054 else 2055 brcmf_dbg(DATA, "processed %d frames\n", rxcount); 2056 /* Back off rxseq if awaiting rtx, update rx_seq */ 2057 if (bus->rxskip) 2058 rd->seq_num--; 2059 bus->rx_seq = rd->seq_num; 2060 2061 return rxcount; 2062 } 2063 2064 static void 2065 brcmf_sdio_wait_event_wakeup(struct brcmf_sdio *bus) 2066 { 2067 wake_up_interruptible(&bus->ctrl_wait); 2068 return; 2069 } 2070 2071 static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt) 2072 { 2073 struct brcmf_bus_stats *stats; 2074 u16 head_pad; 2075 u8 *dat_buf; 2076 2077 dat_buf = (u8 *)(pkt->data); 2078 2079 /* Check head padding */ 2080 head_pad = ((unsigned long)dat_buf % bus->head_align); 2081 if (head_pad) { 2082 if (skb_headroom(pkt) < head_pad) { 2083 stats = &bus->sdiodev->bus_if->stats; 2084 atomic_inc(&stats->pktcowed); 2085 if (skb_cow_head(pkt, head_pad)) { 2086 atomic_inc(&stats->pktcow_failed); 2087 return -ENOMEM; 2088 } 2089 head_pad = 0; 2090 } 2091 skb_push(pkt, head_pad); 2092 dat_buf = (u8 *)(pkt->data); 2093 } 2094 memset(dat_buf, 0, head_pad + bus->tx_hdrlen); 2095 return head_pad; 2096 } 2097 2098 /* 2099 * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for 2100 * bus layer usage. 2101 */ 2102 /* flag marking a dummy skb added for DMA alignment requirement */ 2103 #define ALIGN_SKB_FLAG 0x8000 2104 /* bit mask of data length chopped from the previous packet */ 2105 #define ALIGN_SKB_CHOP_LEN_MASK 0x7fff 2106 2107 static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, 2108 struct sk_buff_head *pktq, 2109 struct sk_buff *pkt, u16 total_len) 2110 { 2111 struct brcmf_sdio_dev *sdiodev; 2112 struct sk_buff *pkt_pad; 2113 u16 tail_pad, tail_chop, chain_pad; 2114 unsigned int blksize; 2115 bool lastfrm; 2116 int ntail, ret; 2117 2118 sdiodev = bus->sdiodev; 2119 blksize = sdiodev->func2->cur_blksize; 2120 /* sg entry alignment should be a divisor of block size */ 2121 WARN_ON(blksize % bus->sgentry_align); 2122 2123 /* Check tail padding */ 2124 lastfrm = skb_queue_is_last(pktq, pkt); 2125 tail_pad = 0; 2126 tail_chop = pkt->len % bus->sgentry_align; 2127 if (tail_chop) 2128 tail_pad = bus->sgentry_align - tail_chop; 2129 chain_pad = (total_len + tail_pad) % blksize; 2130 if (lastfrm && chain_pad) 2131 tail_pad += blksize - chain_pad; 2132 if (skb_tailroom(pkt) < tail_pad && pkt->len > blksize) { 2133 pkt_pad = brcmu_pkt_buf_get_skb(tail_pad + tail_chop + 2134 bus->head_align); 2135 if (pkt_pad == NULL) 2136 return -ENOMEM; 2137 ret = brcmf_sdio_txpkt_hdalign(bus, pkt_pad); 2138 if (unlikely(ret < 0)) { 2139 kfree_skb(pkt_pad); 2140 return ret; 2141 } 2142 memcpy(pkt_pad->data, 2143 pkt->data + pkt->len - tail_chop, 2144 tail_chop); 2145 *(u16 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop; 2146 skb_trim(pkt, pkt->len - tail_chop); 2147 skb_trim(pkt_pad, tail_pad + tail_chop); 2148 __skb_queue_after(pktq, pkt, pkt_pad); 2149 } else { 2150 ntail = pkt->data_len + tail_pad - 2151 (pkt->end - pkt->tail); 2152 if (skb_cloned(pkt) || ntail > 0) 2153 if (pskb_expand_head(pkt, 0, ntail, GFP_ATOMIC)) 2154 return -ENOMEM; 2155 if (skb_linearize(pkt)) 2156 return -ENOMEM; 2157 __skb_put(pkt, tail_pad); 2158 } 2159 2160 return tail_pad; 2161 } 2162 2163 /** 2164 * brcmf_sdio_txpkt_prep - packet preparation for transmit 2165 * @bus: brcmf_sdio structure pointer 2166 * @pktq: packet list pointer 2167 * @chan: virtual channel to transmit the packet 2168 * 2169 * Processes to be applied to the packet 2170 * - Align data buffer pointer 2171 * - Align data buffer length 2172 * - Prepare header 2173 * Return: negative value if there is error 2174 */ 2175 static int 2176 brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, 2177 uint chan) 2178 { 2179 u16 head_pad, total_len; 2180 struct sk_buff *pkt_next; 2181 u8 txseq; 2182 int ret; 2183 struct brcmf_sdio_hdrinfo hd_info = {0}; 2184 2185 txseq = bus->tx_seq; 2186 total_len = 0; 2187 skb_queue_walk(pktq, pkt_next) { 2188 /* alignment packet inserted in previous 2189 * loop cycle can be skipped as it is 2190 * already properly aligned and does not 2191 * need an sdpcm header. 2192 */ 2193 if (*(u16 *)(pkt_next->cb) & ALIGN_SKB_FLAG) 2194 continue; 2195 2196 /* align packet data pointer */ 2197 ret = brcmf_sdio_txpkt_hdalign(bus, pkt_next); 2198 if (ret < 0) 2199 return ret; 2200 head_pad = (u16)ret; 2201 if (head_pad) 2202 memset(pkt_next->data + bus->tx_hdrlen, 0, head_pad); 2203 2204 total_len += pkt_next->len; 2205 2206 hd_info.len = pkt_next->len; 2207 hd_info.lastfrm = skb_queue_is_last(pktq, pkt_next); 2208 if (bus->txglom && pktq->qlen > 1) { 2209 ret = brcmf_sdio_txpkt_prep_sg(bus, pktq, 2210 pkt_next, total_len); 2211 if (ret < 0) 2212 return ret; 2213 hd_info.tail_pad = (u16)ret; 2214 total_len += (u16)ret; 2215 } 2216 2217 hd_info.channel = chan; 2218 hd_info.dat_offset = head_pad + bus->tx_hdrlen; 2219 hd_info.seq_num = txseq++; 2220 2221 /* Now fill the header */ 2222 brcmf_sdio_hdpack(bus, pkt_next->data, &hd_info); 2223 2224 if (BRCMF_BYTES_ON() && 2225 ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || 2226 (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) 2227 brcmf_dbg_hex_dump(true, pkt_next->data, hd_info.len, 2228 "Tx Frame:\n"); 2229 else if (BRCMF_HDRS_ON()) 2230 brcmf_dbg_hex_dump(true, pkt_next->data, 2231 head_pad + bus->tx_hdrlen, 2232 "Tx Header:\n"); 2233 } 2234 /* Hardware length tag of the first packet should be total 2235 * length of the chain (including padding) 2236 */ 2237 if (bus->txglom) 2238 brcmf_sdio_update_hwhdr(__skb_peek(pktq)->data, total_len); 2239 return 0; 2240 } 2241 2242 /** 2243 * brcmf_sdio_txpkt_postp - packet post processing for transmit 2244 * @bus: brcmf_sdio structure pointer 2245 * @pktq: packet list pointer 2246 * 2247 * Processes to be applied to the packet 2248 * - Remove head padding 2249 * - Remove tail padding 2250 */ 2251 static void 2252 brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) 2253 { 2254 u8 *hdr; 2255 u32 dat_offset; 2256 u16 tail_pad; 2257 u16 dummy_flags, chop_len; 2258 struct sk_buff *pkt_next, *tmp, *pkt_prev; 2259 2260 skb_queue_walk_safe(pktq, pkt_next, tmp) { 2261 dummy_flags = *(u16 *)(pkt_next->cb); 2262 if (dummy_flags & ALIGN_SKB_FLAG) { 2263 chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK; 2264 if (chop_len) { 2265 pkt_prev = pkt_next->prev; 2266 skb_put(pkt_prev, chop_len); 2267 } 2268 __skb_unlink(pkt_next, pktq); 2269 brcmu_pkt_buf_free_skb(pkt_next); 2270 } else { 2271 hdr = pkt_next->data + bus->tx_hdrlen - SDPCM_SWHDR_LEN; 2272 dat_offset = le32_to_cpu(*(__le32 *)hdr); 2273 dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >> 2274 SDPCM_DOFFSET_SHIFT; 2275 skb_pull(pkt_next, dat_offset); 2276 if (bus->txglom) { 2277 tail_pad = le16_to_cpu(*(__le16 *)(hdr - 2)); 2278 skb_trim(pkt_next, pkt_next->len - tail_pad); 2279 } 2280 } 2281 } 2282 } 2283 2284 /* Writes a HW/SW header into the packet and sends it. */ 2285 /* Assumes: (a) header space already there, (b) caller holds lock */ 2286 static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq, 2287 uint chan) 2288 { 2289 int ret; 2290 struct sk_buff *pkt_next, *tmp; 2291 2292 brcmf_dbg(TRACE, "Enter\n"); 2293 2294 ret = brcmf_sdio_txpkt_prep(bus, pktq, chan); 2295 if (ret) 2296 goto done; 2297 2298 sdio_claim_host(bus->sdiodev->func1); 2299 ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq); 2300 bus->sdcnt.f2txdata++; 2301 2302 if (ret < 0) 2303 brcmf_sdio_txfail(bus); 2304 2305 sdio_release_host(bus->sdiodev->func1); 2306 2307 done: 2308 brcmf_sdio_txpkt_postp(bus, pktq); 2309 if (ret == 0) 2310 bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP; 2311 skb_queue_walk_safe(pktq, pkt_next, tmp) { 2312 __skb_unlink(pkt_next, pktq); 2313 brcmf_proto_bcdc_txcomplete(bus->sdiodev->dev, pkt_next, 2314 ret == 0); 2315 } 2316 return ret; 2317 } 2318 2319 static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) 2320 { 2321 struct sk_buff *pkt; 2322 struct sk_buff_head pktq; 2323 u32 intstat_addr = bus->sdio_core->base + SD_REG(intstatus); 2324 u32 intstatus = 0; 2325 int ret = 0, prec_out, i; 2326 uint cnt = 0; 2327 u8 tx_prec_map, pkt_num; 2328 2329 brcmf_dbg(TRACE, "Enter\n"); 2330 2331 tx_prec_map = ~bus->flowcontrol; 2332 2333 /* Send frames until the limit or some other event */ 2334 for (cnt = 0; (cnt < maxframes) && data_ok(bus);) { 2335 pkt_num = 1; 2336 if (bus->txglom) 2337 pkt_num = min_t(u8, bus->tx_max - bus->tx_seq, 2338 bus->sdiodev->txglomsz); 2339 pkt_num = min_t(u32, pkt_num, 2340 brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)); 2341 __skb_queue_head_init(&pktq); 2342 spin_lock_bh(&bus->txq_lock); 2343 for (i = 0; i < pkt_num; i++) { 2344 pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, 2345 &prec_out); 2346 if (pkt == NULL) 2347 break; 2348 __skb_queue_tail(&pktq, pkt); 2349 } 2350 spin_unlock_bh(&bus->txq_lock); 2351 if (i == 0) 2352 break; 2353 2354 ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL); 2355 2356 cnt += i; 2357 2358 /* In poll mode, need to check for other events */ 2359 if (!bus->intr) { 2360 /* Check device status, signal pending interrupt */ 2361 sdio_claim_host(bus->sdiodev->func1); 2362 intstatus = brcmf_sdiod_readl(bus->sdiodev, 2363 intstat_addr, &ret); 2364 sdio_release_host(bus->sdiodev->func1); 2365 2366 bus->sdcnt.f2txdata++; 2367 if (ret != 0) 2368 break; 2369 if (intstatus & bus->hostintmask) 2370 atomic_set(&bus->ipend, 1); 2371 } 2372 } 2373 2374 /* Deflow-control stack if needed */ 2375 if ((bus->sdiodev->state == BRCMF_SDIOD_DATA) && 2376 bus->txoff && (pktq_len(&bus->txq) < TXLOW)) { 2377 bus->txoff = false; 2378 brcmf_proto_bcdc_txflowblock(bus->sdiodev->dev, false); 2379 } 2380 2381 return cnt; 2382 } 2383 2384 static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len) 2385 { 2386 u8 doff; 2387 u16 pad; 2388 uint retries = 0; 2389 struct brcmf_sdio_hdrinfo hd_info = {0}; 2390 int ret; 2391 2392 brcmf_dbg(SDIO, "Enter\n"); 2393 2394 /* Back the pointer to make room for bus header */ 2395 frame -= bus->tx_hdrlen; 2396 len += bus->tx_hdrlen; 2397 2398 /* Add alignment padding (optional for ctl frames) */ 2399 doff = ((unsigned long)frame % bus->head_align); 2400 if (doff) { 2401 frame -= doff; 2402 len += doff; 2403 memset(frame + bus->tx_hdrlen, 0, doff); 2404 } 2405 2406 /* Round send length to next SDIO block */ 2407 pad = 0; 2408 if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { 2409 pad = bus->blocksize - (len % bus->blocksize); 2410 if ((pad > bus->roundup) || (pad >= bus->blocksize)) 2411 pad = 0; 2412 } else if (len % bus->head_align) { 2413 pad = bus->head_align - (len % bus->head_align); 2414 } 2415 len += pad; 2416 2417 hd_info.len = len - pad; 2418 hd_info.channel = SDPCM_CONTROL_CHANNEL; 2419 hd_info.dat_offset = doff + bus->tx_hdrlen; 2420 hd_info.seq_num = bus->tx_seq; 2421 hd_info.lastfrm = true; 2422 hd_info.tail_pad = pad; 2423 brcmf_sdio_hdpack(bus, frame, &hd_info); 2424 2425 if (bus->txglom) 2426 brcmf_sdio_update_hwhdr(frame, len); 2427 2428 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(), 2429 frame, len, "Tx Frame:\n"); 2430 brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) && 2431 BRCMF_HDRS_ON(), 2432 frame, min_t(u16, len, 16), "TxHdr:\n"); 2433 2434 do { 2435 ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len); 2436 2437 if (ret < 0) 2438 brcmf_sdio_txfail(bus); 2439 else 2440 bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; 2441 } while (ret < 0 && retries++ < TXRETRIES); 2442 2443 return ret; 2444 } 2445 2446 static bool brcmf_chip_is_ulp(struct brcmf_chip *ci) 2447 { 2448 if (ci->chip == CY_CC_43012_CHIP_ID) 2449 return true; 2450 else 2451 return false; 2452 } 2453 2454 static void brcmf_sdio_bus_stop(struct device *dev) 2455 { 2456 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 2457 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 2458 struct brcmf_sdio *bus = sdiodev->bus; 2459 struct brcmf_core *core = bus->sdio_core; 2460 u32 local_hostintmask; 2461 u8 saveclk, bpreq; 2462 int err; 2463 2464 brcmf_dbg(TRACE, "Enter\n"); 2465 2466 if (bus->watchdog_tsk) { 2467 send_sig(SIGTERM, bus->watchdog_tsk, 1); 2468 kthread_stop(bus->watchdog_tsk); 2469 bus->watchdog_tsk = NULL; 2470 } 2471 2472 if (sdiodev->state != BRCMF_SDIOD_NOMEDIUM) { 2473 sdio_claim_host(sdiodev->func1); 2474 2475 /* Enable clock for device interrupts */ 2476 brcmf_sdio_bus_sleep(bus, false, false); 2477 2478 /* Disable and clear interrupts at the chip level also */ 2479 brcmf_sdiod_writel(sdiodev, core->base + SD_REG(hostintmask), 2480 0, NULL); 2481 2482 local_hostintmask = bus->hostintmask; 2483 bus->hostintmask = 0; 2484 2485 /* Force backplane clocks to assure F2 interrupt propagates */ 2486 saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 2487 &err); 2488 if (!err) { 2489 bpreq = saveclk; 2490 bpreq |= brcmf_chip_is_ulp(bus->ci) ? 2491 SBSDIO_HT_AVAIL_REQ : SBSDIO_FORCE_HT; 2492 brcmf_sdiod_writeb(sdiodev, 2493 SBSDIO_FUNC1_CHIPCLKCSR, 2494 bpreq, &err); 2495 } 2496 if (err) 2497 brcmf_err("Failed to force clock for F2: err %d\n", 2498 err); 2499 2500 /* Turn off the bus (F2), free any pending packets */ 2501 brcmf_dbg(INTR, "disable SDIO interrupts\n"); 2502 sdio_disable_func(sdiodev->func2); 2503 2504 /* Clear any pending interrupts now that F2 is disabled */ 2505 brcmf_sdiod_writel(sdiodev, core->base + SD_REG(intstatus), 2506 local_hostintmask, NULL); 2507 2508 sdio_release_host(sdiodev->func1); 2509 } 2510 /* Clear the data packet queues */ 2511 brcmu_pktq_flush(&bus->txq, true, NULL, NULL); 2512 2513 /* Clear any held glomming stuff */ 2514 brcmu_pkt_buf_free_skb(bus->glomd); 2515 brcmf_sdio_free_glom(bus); 2516 2517 /* Clear rx control and wake any waiters */ 2518 spin_lock_bh(&bus->rxctl_lock); 2519 bus->rxlen = 0; 2520 spin_unlock_bh(&bus->rxctl_lock); 2521 brcmf_sdio_dcmd_resp_wake(bus); 2522 2523 /* Reset some F2 state stuff */ 2524 bus->rxskip = false; 2525 bus->tx_seq = bus->rx_seq = 0; 2526 } 2527 2528 static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus) 2529 { 2530 struct brcmf_sdio_dev *sdiodev; 2531 unsigned long flags; 2532 2533 sdiodev = bus->sdiodev; 2534 if (sdiodev->oob_irq_requested) { 2535 spin_lock_irqsave(&sdiodev->irq_en_lock, flags); 2536 if (!sdiodev->irq_en && !atomic_read(&bus->ipend)) { 2537 enable_irq(sdiodev->settings->bus.sdio.oob_irq_nr); 2538 sdiodev->irq_en = true; 2539 } 2540 spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags); 2541 } 2542 } 2543 2544 static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) 2545 { 2546 struct brcmf_core *core = bus->sdio_core; 2547 u32 addr; 2548 unsigned long val; 2549 int ret; 2550 2551 addr = core->base + SD_REG(intstatus); 2552 2553 val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret); 2554 bus->sdcnt.f1regdata++; 2555 if (ret != 0) 2556 return ret; 2557 2558 val &= bus->hostintmask; 2559 atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE)); 2560 2561 /* Clear interrupts */ 2562 if (val) { 2563 brcmf_sdiod_writel(bus->sdiodev, addr, val, &ret); 2564 bus->sdcnt.f1regdata++; 2565 atomic_or(val, &bus->intstatus); 2566 } 2567 2568 return ret; 2569 } 2570 2571 static void brcmf_sdio_dpc(struct brcmf_sdio *bus) 2572 { 2573 struct brcmf_sdio_dev *sdiod = bus->sdiodev; 2574 u32 newstatus = 0; 2575 u32 intstat_addr = bus->sdio_core->base + SD_REG(intstatus); 2576 unsigned long intstatus; 2577 uint txlimit = bus->txbound; /* Tx frames to send before resched */ 2578 uint framecnt; /* Temporary counter of tx/rx frames */ 2579 int err = 0; 2580 2581 brcmf_dbg(SDIO, "Enter\n"); 2582 2583 sdio_claim_host(bus->sdiodev->func1); 2584 2585 /* If waiting for HTAVAIL, check status */ 2586 if (!bus->sr_enabled && bus->clkstate == CLK_PENDING) { 2587 u8 clkctl, devctl = 0; 2588 2589 #ifdef DEBUG 2590 /* Check for inconsistent device control */ 2591 devctl = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_DEVICE_CTL, 2592 &err); 2593 #endif /* DEBUG */ 2594 2595 /* Read CSR, if clock on switch to AVAIL, else ignore */ 2596 clkctl = brcmf_sdiod_readb(bus->sdiodev, 2597 SBSDIO_FUNC1_CHIPCLKCSR, &err); 2598 2599 brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n", 2600 devctl, clkctl); 2601 2602 if (SBSDIO_HTAV(clkctl)) { 2603 devctl = brcmf_sdiod_readb(bus->sdiodev, 2604 SBSDIO_DEVICE_CTL, &err); 2605 devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; 2606 brcmf_sdiod_writeb(bus->sdiodev, 2607 SBSDIO_DEVICE_CTL, devctl, &err); 2608 bus->clkstate = CLK_AVAIL; 2609 } 2610 } 2611 2612 /* Make sure backplane clock is on */ 2613 brcmf_sdio_bus_sleep(bus, false, true); 2614 2615 /* Pending interrupt indicates new device status */ 2616 if (atomic_read(&bus->ipend) > 0) { 2617 atomic_set(&bus->ipend, 0); 2618 err = brcmf_sdio_intr_rstatus(bus); 2619 } 2620 2621 /* Start with leftover status bits */ 2622 intstatus = atomic_xchg(&bus->intstatus, 0); 2623 2624 /* Handle flow-control change: read new state in case our ack 2625 * crossed another change interrupt. If change still set, assume 2626 * FC ON for safety, let next loop through do the debounce. 2627 */ 2628 if (intstatus & I_HMB_FC_CHANGE) { 2629 intstatus &= ~I_HMB_FC_CHANGE; 2630 brcmf_sdiod_writel(sdiod, intstat_addr, I_HMB_FC_CHANGE, &err); 2631 2632 newstatus = brcmf_sdiod_readl(sdiod, intstat_addr, &err); 2633 2634 bus->sdcnt.f1regdata += 2; 2635 atomic_set(&bus->fcstate, 2636 !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE))); 2637 intstatus |= (newstatus & bus->hostintmask); 2638 } 2639 2640 /* Handle host mailbox indication */ 2641 if (intstatus & I_HMB_HOST_INT) { 2642 intstatus &= ~I_HMB_HOST_INT; 2643 intstatus |= brcmf_sdio_hostmail(bus); 2644 } 2645 2646 sdio_release_host(bus->sdiodev->func1); 2647 2648 /* Generally don't ask for these, can get CRC errors... */ 2649 if (intstatus & I_WR_OOSYNC) { 2650 brcmf_err("Dongle reports WR_OOSYNC\n"); 2651 intstatus &= ~I_WR_OOSYNC; 2652 } 2653 2654 if (intstatus & I_RD_OOSYNC) { 2655 brcmf_err("Dongle reports RD_OOSYNC\n"); 2656 intstatus &= ~I_RD_OOSYNC; 2657 } 2658 2659 if (intstatus & I_SBINT) { 2660 brcmf_err("Dongle reports SBINT\n"); 2661 intstatus &= ~I_SBINT; 2662 } 2663 2664 /* Would be active due to wake-wlan in gSPI */ 2665 if (intstatus & I_CHIPACTIVE) { 2666 brcmf_dbg(SDIO, "Dongle reports CHIPACTIVE\n"); 2667 intstatus &= ~I_CHIPACTIVE; 2668 } 2669 2670 /* Ignore frame indications if rxskip is set */ 2671 if (bus->rxskip) 2672 intstatus &= ~I_HMB_FRAME_IND; 2673 2674 /* On frame indication, read available frames */ 2675 if ((intstatus & I_HMB_FRAME_IND) && (bus->clkstate == CLK_AVAIL)) { 2676 brcmf_sdio_readframes(bus, bus->rxbound); 2677 if (!bus->rxpending) 2678 intstatus &= ~I_HMB_FRAME_IND; 2679 } 2680 2681 /* Keep still-pending events for next scheduling */ 2682 if (intstatus) 2683 atomic_or(intstatus, &bus->intstatus); 2684 2685 brcmf_sdio_clrintr(bus); 2686 2687 if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) && 2688 txctl_ok(bus)) { 2689 sdio_claim_host(bus->sdiodev->func1); 2690 if (bus->ctrl_frame_stat) { 2691 err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, 2692 bus->ctrl_frame_len); 2693 bus->ctrl_frame_err = err; 2694 wmb(); 2695 bus->ctrl_frame_stat = false; 2696 if (err) 2697 brcmf_err("sdio ctrlframe tx failed err=%d\n", 2698 err); 2699 } 2700 sdio_release_host(bus->sdiodev->func1); 2701 brcmf_sdio_wait_event_wakeup(bus); 2702 } 2703 /* Send queued frames (limit 1 if rx may still be pending) */ 2704 if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && 2705 brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit && 2706 data_ok(bus)) { 2707 framecnt = bus->rxpending ? min(txlimit, bus->txminmax) : 2708 txlimit; 2709 brcmf_sdio_sendfromq(bus, framecnt); 2710 } 2711 2712 if ((bus->sdiodev->state != BRCMF_SDIOD_DATA) || (err != 0)) { 2713 brcmf_err("failed backplane access over SDIO, halting operation\n"); 2714 atomic_set(&bus->intstatus, 0); 2715 if (bus->ctrl_frame_stat) { 2716 sdio_claim_host(bus->sdiodev->func1); 2717 if (bus->ctrl_frame_stat) { 2718 bus->ctrl_frame_err = -ENODEV; 2719 wmb(); 2720 bus->ctrl_frame_stat = false; 2721 brcmf_sdio_wait_event_wakeup(bus); 2722 } 2723 sdio_release_host(bus->sdiodev->func1); 2724 } 2725 } else if (atomic_read(&bus->intstatus) || 2726 atomic_read(&bus->ipend) > 0 || 2727 (!atomic_read(&bus->fcstate) && 2728 brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && 2729 data_ok(bus))) { 2730 bus->dpc_triggered = true; 2731 } 2732 } 2733 2734 static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev) 2735 { 2736 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 2737 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 2738 struct brcmf_sdio *bus = sdiodev->bus; 2739 2740 return &bus->txq; 2741 } 2742 2743 static bool brcmf_sdio_prec_enq(struct pktq *q, struct sk_buff *pkt, int prec) 2744 { 2745 struct sk_buff *p; 2746 int eprec = -1; /* precedence to evict from */ 2747 2748 /* Fast case, precedence queue is not full and we are also not 2749 * exceeding total queue length 2750 */ 2751 if (!pktq_pfull(q, prec) && !pktq_full(q)) { 2752 brcmu_pktq_penq(q, prec, pkt); 2753 return true; 2754 } 2755 2756 /* Determine precedence from which to evict packet, if any */ 2757 if (pktq_pfull(q, prec)) { 2758 eprec = prec; 2759 } else if (pktq_full(q)) { 2760 p = brcmu_pktq_peek_tail(q, &eprec); 2761 if (eprec > prec) 2762 return false; 2763 } 2764 2765 /* Evict if needed */ 2766 if (eprec >= 0) { 2767 /* Detect queueing to unconfigured precedence */ 2768 if (eprec == prec) 2769 return false; /* refuse newer (incoming) packet */ 2770 /* Evict packet according to discard policy */ 2771 p = brcmu_pktq_pdeq_tail(q, eprec); 2772 if (p == NULL) 2773 brcmf_err("brcmu_pktq_pdeq_tail() failed\n"); 2774 brcmu_pkt_buf_free_skb(p); 2775 } 2776 2777 /* Enqueue */ 2778 p = brcmu_pktq_penq(q, prec, pkt); 2779 if (p == NULL) 2780 brcmf_err("brcmu_pktq_penq() failed\n"); 2781 2782 return p != NULL; 2783 } 2784 2785 static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) 2786 { 2787 int ret = -EBADE; 2788 uint prec; 2789 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 2790 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 2791 struct brcmf_sdio *bus = sdiodev->bus; 2792 2793 brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len); 2794 if (sdiodev->state != BRCMF_SDIOD_DATA) 2795 return -EIO; 2796 2797 /* Add space for the header */ 2798 skb_push(pkt, bus->tx_hdrlen); 2799 /* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */ 2800 2801 /* In WLAN, priority is always set by the AP using WMM parameters 2802 * and this need not always follow the standard 802.1d priority. 2803 * Based on AP WMM config, map from 802.1d priority to corresponding 2804 * precedence level. 2805 */ 2806 prec = brcmf_map_prio_to_prec(bus_if->drvr->config, 2807 (pkt->priority & PRIOMASK)); 2808 2809 /* Check for existing queue, current flow-control, 2810 pending event, or pending clock */ 2811 brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq)); 2812 bus->sdcnt.fcqueued++; 2813 2814 /* Priority based enq */ 2815 spin_lock_bh(&bus->txq_lock); 2816 /* reset bus_flags in packet cb */ 2817 *(u16 *)(pkt->cb) = 0; 2818 if (!brcmf_sdio_prec_enq(&bus->txq, pkt, prec)) { 2819 skb_pull(pkt, bus->tx_hdrlen); 2820 brcmf_err("out of bus->txq !!!\n"); 2821 ret = -ENOSR; 2822 } else { 2823 ret = 0; 2824 } 2825 2826 if (pktq_len(&bus->txq) >= TXHI) { 2827 bus->txoff = true; 2828 brcmf_proto_bcdc_txflowblock(dev, true); 2829 } 2830 spin_unlock_bh(&bus->txq_lock); 2831 2832 #ifdef DEBUG 2833 if (pktq_plen(&bus->txq, prec) > qcount[prec]) 2834 qcount[prec] = pktq_plen(&bus->txq, prec); 2835 #endif 2836 2837 brcmf_sdio_trigger_dpc(bus); 2838 return ret; 2839 } 2840 2841 #ifdef DEBUG 2842 #define CONSOLE_LINE_MAX 192 2843 2844 static int brcmf_sdio_readconsole(struct brcmf_sdio *bus) 2845 { 2846 struct brcmf_console *c = &bus->console; 2847 u8 line[CONSOLE_LINE_MAX], ch; 2848 u32 n, idx, addr; 2849 int rv; 2850 2851 /* Don't do anything until FWREADY updates console address */ 2852 if (bus->console_addr == 0) 2853 return 0; 2854 2855 /* Read console log struct */ 2856 addr = bus->console_addr + offsetof(struct rte_console, log_le); 2857 rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le, 2858 sizeof(c->log_le)); 2859 if (rv < 0) 2860 return rv; 2861 2862 /* Allocate console buffer (one time only) */ 2863 if (c->buf == NULL) { 2864 c->bufsize = le32_to_cpu(c->log_le.buf_size); 2865 c->buf = kmalloc(c->bufsize, GFP_ATOMIC); 2866 if (c->buf == NULL) 2867 return -ENOMEM; 2868 } 2869 2870 idx = le32_to_cpu(c->log_le.idx); 2871 2872 /* Protect against corrupt value */ 2873 if (idx > c->bufsize) 2874 return -EBADE; 2875 2876 /* Skip reading the console buffer if the index pointer 2877 has not moved */ 2878 if (idx == c->last) 2879 return 0; 2880 2881 /* Read the console buffer */ 2882 addr = le32_to_cpu(c->log_le.buf); 2883 rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize); 2884 if (rv < 0) 2885 return rv; 2886 2887 while (c->last != idx) { 2888 for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) { 2889 if (c->last == idx) { 2890 /* This would output a partial line. 2891 * Instead, back up 2892 * the buffer pointer and output this 2893 * line next time around. 2894 */ 2895 if (c->last >= n) 2896 c->last -= n; 2897 else 2898 c->last = c->bufsize - n; 2899 goto break2; 2900 } 2901 ch = c->buf[c->last]; 2902 c->last = (c->last + 1) % c->bufsize; 2903 if (ch == '\n') 2904 break; 2905 line[n] = ch; 2906 } 2907 2908 if (n > 0) { 2909 if (line[n - 1] == '\r') 2910 n--; 2911 line[n] = 0; 2912 pr_debug("CONSOLE: %s\n", line); 2913 } 2914 } 2915 break2: 2916 2917 return 0; 2918 } 2919 #endif /* DEBUG */ 2920 2921 static int 2922 brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) 2923 { 2924 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 2925 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 2926 struct brcmf_sdio *bus = sdiodev->bus; 2927 int ret; 2928 2929 brcmf_dbg(TRACE, "Enter\n"); 2930 if (sdiodev->state != BRCMF_SDIOD_DATA) 2931 return -EIO; 2932 2933 /* Send from dpc */ 2934 bus->ctrl_frame_buf = msg; 2935 bus->ctrl_frame_len = msglen; 2936 wmb(); 2937 bus->ctrl_frame_stat = true; 2938 2939 brcmf_sdio_trigger_dpc(bus); 2940 wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat, 2941 CTL_DONE_TIMEOUT); 2942 ret = 0; 2943 if (bus->ctrl_frame_stat) { 2944 sdio_claim_host(bus->sdiodev->func1); 2945 if (bus->ctrl_frame_stat) { 2946 brcmf_dbg(SDIO, "ctrl_frame timeout\n"); 2947 bus->ctrl_frame_stat = false; 2948 ret = -ETIMEDOUT; 2949 } 2950 sdio_release_host(bus->sdiodev->func1); 2951 } 2952 if (!ret) { 2953 brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n", 2954 bus->ctrl_frame_err); 2955 rmb(); 2956 ret = bus->ctrl_frame_err; 2957 } 2958 2959 if (ret) 2960 bus->sdcnt.tx_ctlerrs++; 2961 else 2962 bus->sdcnt.tx_ctlpkts++; 2963 2964 return ret; 2965 } 2966 2967 #ifdef DEBUG 2968 static int brcmf_sdio_dump_console(struct seq_file *seq, struct brcmf_sdio *bus, 2969 struct sdpcm_shared *sh) 2970 { 2971 u32 addr, console_ptr, console_size, console_index; 2972 char *conbuf = NULL; 2973 __le32 sh_val; 2974 int rv; 2975 2976 /* obtain console information from device memory */ 2977 addr = sh->console_addr + offsetof(struct rte_console, log_le); 2978 rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, 2979 (u8 *)&sh_val, sizeof(u32)); 2980 if (rv < 0) 2981 return rv; 2982 console_ptr = le32_to_cpu(sh_val); 2983 2984 addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size); 2985 rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, 2986 (u8 *)&sh_val, sizeof(u32)); 2987 if (rv < 0) 2988 return rv; 2989 console_size = le32_to_cpu(sh_val); 2990 2991 addr = sh->console_addr + offsetof(struct rte_console, log_le.idx); 2992 rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, 2993 (u8 *)&sh_val, sizeof(u32)); 2994 if (rv < 0) 2995 return rv; 2996 console_index = le32_to_cpu(sh_val); 2997 2998 /* allocate buffer for console data */ 2999 if (console_size <= CONSOLE_BUFFER_MAX) 3000 conbuf = vzalloc(console_size+1); 3001 3002 if (!conbuf) 3003 return -ENOMEM; 3004 3005 /* obtain the console data from device */ 3006 conbuf[console_size] = '\0'; 3007 rv = brcmf_sdiod_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf, 3008 console_size); 3009 if (rv < 0) 3010 goto done; 3011 3012 rv = seq_write(seq, conbuf + console_index, 3013 console_size - console_index); 3014 if (rv < 0) 3015 goto done; 3016 3017 if (console_index > 0) 3018 rv = seq_write(seq, conbuf, console_index - 1); 3019 3020 done: 3021 vfree(conbuf); 3022 return rv; 3023 } 3024 3025 static int brcmf_sdio_trap_info(struct seq_file *seq, struct brcmf_sdio *bus, 3026 struct sdpcm_shared *sh) 3027 { 3028 int error; 3029 struct brcmf_trap_info tr; 3030 3031 if ((sh->flags & SDPCM_SHARED_TRAP) == 0) { 3032 brcmf_dbg(INFO, "no trap in firmware\n"); 3033 return 0; 3034 } 3035 3036 error = brcmf_sdiod_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr, 3037 sizeof(struct brcmf_trap_info)); 3038 if (error < 0) 3039 return error; 3040 3041 if (seq) 3042 seq_printf(seq, 3043 "dongle trap info: type 0x%x @ epc 0x%08x\n" 3044 " cpsr 0x%08x spsr 0x%08x sp 0x%08x\n" 3045 " lr 0x%08x pc 0x%08x offset 0x%x\n" 3046 " r0 0x%08x r1 0x%08x r2 0x%08x r3 0x%08x\n" 3047 " r4 0x%08x r5 0x%08x r6 0x%08x r7 0x%08x\n", 3048 le32_to_cpu(tr.type), le32_to_cpu(tr.epc), 3049 le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr), 3050 le32_to_cpu(tr.r13), le32_to_cpu(tr.r14), 3051 le32_to_cpu(tr.pc), sh->trap_addr, 3052 le32_to_cpu(tr.r0), le32_to_cpu(tr.r1), 3053 le32_to_cpu(tr.r2), le32_to_cpu(tr.r3), 3054 le32_to_cpu(tr.r4), le32_to_cpu(tr.r5), 3055 le32_to_cpu(tr.r6), le32_to_cpu(tr.r7)); 3056 else 3057 pr_debug("dongle trap info: type 0x%x @ epc 0x%08x\n" 3058 " cpsr 0x%08x spsr 0x%08x sp 0x%08x\n" 3059 " lr 0x%08x pc 0x%08x offset 0x%x\n" 3060 " r0 0x%08x r1 0x%08x r2 0x%08x r3 0x%08x\n" 3061 " r4 0x%08x r5 0x%08x r6 0x%08x r7 0x%08x\n", 3062 le32_to_cpu(tr.type), le32_to_cpu(tr.epc), 3063 le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr), 3064 le32_to_cpu(tr.r13), le32_to_cpu(tr.r14), 3065 le32_to_cpu(tr.pc), sh->trap_addr, 3066 le32_to_cpu(tr.r0), le32_to_cpu(tr.r1), 3067 le32_to_cpu(tr.r2), le32_to_cpu(tr.r3), 3068 le32_to_cpu(tr.r4), le32_to_cpu(tr.r5), 3069 le32_to_cpu(tr.r6), le32_to_cpu(tr.r7)); 3070 return 0; 3071 } 3072 3073 static int brcmf_sdio_assert_info(struct seq_file *seq, struct brcmf_sdio *bus, 3074 struct sdpcm_shared *sh) 3075 { 3076 int error = 0; 3077 char file[80] = "?"; 3078 char expr[80] = "<???>"; 3079 3080 if ((sh->flags & SDPCM_SHARED_ASSERT_BUILT) == 0) { 3081 brcmf_dbg(INFO, "firmware not built with -assert\n"); 3082 return 0; 3083 } else if ((sh->flags & SDPCM_SHARED_ASSERT) == 0) { 3084 brcmf_dbg(INFO, "no assert in dongle\n"); 3085 return 0; 3086 } 3087 3088 sdio_claim_host(bus->sdiodev->func1); 3089 if (sh->assert_file_addr != 0) { 3090 error = brcmf_sdiod_ramrw(bus->sdiodev, false, 3091 sh->assert_file_addr, (u8 *)file, 80); 3092 if (error < 0) 3093 return error; 3094 } 3095 if (sh->assert_exp_addr != 0) { 3096 error = brcmf_sdiod_ramrw(bus->sdiodev, false, 3097 sh->assert_exp_addr, (u8 *)expr, 80); 3098 if (error < 0) 3099 return error; 3100 } 3101 sdio_release_host(bus->sdiodev->func1); 3102 3103 seq_printf(seq, "dongle assert: %s:%d: assert(%s)\n", 3104 file, sh->assert_line, expr); 3105 return 0; 3106 } 3107 3108 static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) 3109 { 3110 int error; 3111 struct sdpcm_shared sh; 3112 3113 error = brcmf_sdio_readshared(bus, &sh); 3114 3115 if (error < 0) 3116 return error; 3117 3118 if ((sh.flags & SDPCM_SHARED_ASSERT_BUILT) == 0) 3119 brcmf_dbg(INFO, "firmware not built with -assert\n"); 3120 else if (sh.flags & SDPCM_SHARED_ASSERT) 3121 brcmf_err("assertion in dongle\n"); 3122 3123 if (sh.flags & SDPCM_SHARED_TRAP) { 3124 brcmf_err("firmware trap in dongle\n"); 3125 brcmf_sdio_trap_info(NULL, bus, &sh); 3126 } 3127 3128 return 0; 3129 } 3130 3131 static int brcmf_sdio_died_dump(struct seq_file *seq, struct brcmf_sdio *bus) 3132 { 3133 int error = 0; 3134 struct sdpcm_shared sh; 3135 3136 error = brcmf_sdio_readshared(bus, &sh); 3137 if (error < 0) 3138 goto done; 3139 3140 error = brcmf_sdio_assert_info(seq, bus, &sh); 3141 if (error < 0) 3142 goto done; 3143 3144 error = brcmf_sdio_trap_info(seq, bus, &sh); 3145 if (error < 0) 3146 goto done; 3147 3148 error = brcmf_sdio_dump_console(seq, bus, &sh); 3149 3150 done: 3151 return error; 3152 } 3153 3154 static int brcmf_sdio_forensic_read(struct seq_file *seq, void *data) 3155 { 3156 struct brcmf_bus *bus_if = dev_get_drvdata(seq->private); 3157 struct brcmf_sdio *bus = bus_if->bus_priv.sdio->bus; 3158 3159 return brcmf_sdio_died_dump(seq, bus); 3160 } 3161 3162 static int brcmf_debugfs_sdio_count_read(struct seq_file *seq, void *data) 3163 { 3164 struct brcmf_bus *bus_if = dev_get_drvdata(seq->private); 3165 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 3166 struct brcmf_sdio_count *sdcnt = &sdiodev->bus->sdcnt; 3167 3168 seq_printf(seq, 3169 "intrcount: %u\nlastintrs: %u\n" 3170 "pollcnt: %u\nregfails: %u\n" 3171 "tx_sderrs: %u\nfcqueued: %u\n" 3172 "rxrtx: %u\nrx_toolong: %u\n" 3173 "rxc_errors: %u\nrx_hdrfail: %u\n" 3174 "rx_badhdr: %u\nrx_badseq: %u\n" 3175 "fc_rcvd: %u\nfc_xoff: %u\n" 3176 "fc_xon: %u\nrxglomfail: %u\n" 3177 "rxglomframes: %u\nrxglompkts: %u\n" 3178 "f2rxhdrs: %u\nf2rxdata: %u\n" 3179 "f2txdata: %u\nf1regdata: %u\n" 3180 "tickcnt: %u\ntx_ctlerrs: %lu\n" 3181 "tx_ctlpkts: %lu\nrx_ctlerrs: %lu\n" 3182 "rx_ctlpkts: %lu\nrx_readahead: %lu\n", 3183 sdcnt->intrcount, sdcnt->lastintrs, 3184 sdcnt->pollcnt, sdcnt->regfails, 3185 sdcnt->tx_sderrs, sdcnt->fcqueued, 3186 sdcnt->rxrtx, sdcnt->rx_toolong, 3187 sdcnt->rxc_errors, sdcnt->rx_hdrfail, 3188 sdcnt->rx_badhdr, sdcnt->rx_badseq, 3189 sdcnt->fc_rcvd, sdcnt->fc_xoff, 3190 sdcnt->fc_xon, sdcnt->rxglomfail, 3191 sdcnt->rxglomframes, sdcnt->rxglompkts, 3192 sdcnt->f2rxhdrs, sdcnt->f2rxdata, 3193 sdcnt->f2txdata, sdcnt->f1regdata, 3194 sdcnt->tickcnt, sdcnt->tx_ctlerrs, 3195 sdcnt->tx_ctlpkts, sdcnt->rx_ctlerrs, 3196 sdcnt->rx_ctlpkts, sdcnt->rx_readahead_cnt); 3197 3198 return 0; 3199 } 3200 3201 static void brcmf_sdio_debugfs_create(struct device *dev) 3202 { 3203 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 3204 struct brcmf_pub *drvr = bus_if->drvr; 3205 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 3206 struct brcmf_sdio *bus = sdiodev->bus; 3207 struct dentry *dentry = brcmf_debugfs_get_devdir(drvr); 3208 3209 if (IS_ERR_OR_NULL(dentry)) 3210 return; 3211 3212 bus->console_interval = BRCMF_CONSOLE; 3213 3214 brcmf_debugfs_add_entry(drvr, "forensics", brcmf_sdio_forensic_read); 3215 brcmf_debugfs_add_entry(drvr, "counters", 3216 brcmf_debugfs_sdio_count_read); 3217 debugfs_create_u32("console_interval", 0644, dentry, 3218 &bus->console_interval); 3219 } 3220 #else 3221 static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) 3222 { 3223 return 0; 3224 } 3225 3226 static void brcmf_sdio_debugfs_create(struct device *dev) 3227 { 3228 } 3229 #endif /* DEBUG */ 3230 3231 static int 3232 brcmf_sdio_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) 3233 { 3234 int timeleft; 3235 uint rxlen = 0; 3236 bool pending; 3237 u8 *buf; 3238 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 3239 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 3240 struct brcmf_sdio *bus = sdiodev->bus; 3241 3242 brcmf_dbg(TRACE, "Enter\n"); 3243 if (sdiodev->state != BRCMF_SDIOD_DATA) 3244 return -EIO; 3245 3246 /* Wait until control frame is available */ 3247 timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending); 3248 3249 spin_lock_bh(&bus->rxctl_lock); 3250 rxlen = bus->rxlen; 3251 memcpy(msg, bus->rxctl, min(msglen, rxlen)); 3252 bus->rxctl = NULL; 3253 buf = bus->rxctl_orig; 3254 bus->rxctl_orig = NULL; 3255 bus->rxlen = 0; 3256 spin_unlock_bh(&bus->rxctl_lock); 3257 vfree(buf); 3258 3259 if (rxlen) { 3260 brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n", 3261 rxlen, msglen); 3262 } else if (timeleft == 0) { 3263 brcmf_err("resumed on timeout\n"); 3264 brcmf_sdio_checkdied(bus); 3265 } else if (pending) { 3266 brcmf_dbg(CTL, "cancelled\n"); 3267 return -ERESTARTSYS; 3268 } else { 3269 brcmf_dbg(CTL, "resumed for unknown reason?\n"); 3270 brcmf_sdio_checkdied(bus); 3271 } 3272 3273 if (rxlen) 3274 bus->sdcnt.rx_ctlpkts++; 3275 else 3276 bus->sdcnt.rx_ctlerrs++; 3277 3278 return rxlen ? (int)rxlen : -ETIMEDOUT; 3279 } 3280 3281 #ifdef DEBUG 3282 static bool 3283 brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr, 3284 u8 *ram_data, uint ram_sz) 3285 { 3286 char *ram_cmp; 3287 int err; 3288 bool ret = true; 3289 int address; 3290 int offset; 3291 int len; 3292 3293 /* read back and verify */ 3294 brcmf_dbg(INFO, "Compare RAM dl & ul at 0x%08x; size=%d\n", ram_addr, 3295 ram_sz); 3296 ram_cmp = kmalloc(MEMBLOCK, GFP_KERNEL); 3297 /* do not proceed while no memory but */ 3298 if (!ram_cmp) 3299 return true; 3300 3301 address = ram_addr; 3302 offset = 0; 3303 while (offset < ram_sz) { 3304 len = ((offset + MEMBLOCK) < ram_sz) ? MEMBLOCK : 3305 ram_sz - offset; 3306 err = brcmf_sdiod_ramrw(sdiodev, false, address, ram_cmp, len); 3307 if (err) { 3308 brcmf_err("error %d on reading %d membytes at 0x%08x\n", 3309 err, len, address); 3310 ret = false; 3311 break; 3312 } else if (memcmp(ram_cmp, &ram_data[offset], len)) { 3313 brcmf_err("Downloaded RAM image is corrupted, block offset is %d, len is %d\n", 3314 offset, len); 3315 ret = false; 3316 break; 3317 } 3318 offset += len; 3319 address += len; 3320 } 3321 3322 kfree(ram_cmp); 3323 3324 return ret; 3325 } 3326 #else /* DEBUG */ 3327 static bool 3328 brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr, 3329 u8 *ram_data, uint ram_sz) 3330 { 3331 return true; 3332 } 3333 #endif /* DEBUG */ 3334 3335 static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus, 3336 const struct firmware *fw) 3337 { 3338 int err; 3339 3340 brcmf_dbg(TRACE, "Enter\n"); 3341 3342 err = brcmf_sdiod_ramrw(bus->sdiodev, true, bus->ci->rambase, 3343 (u8 *)fw->data, fw->size); 3344 if (err) 3345 brcmf_err("error %d on writing %d membytes at 0x%08x\n", 3346 err, (int)fw->size, bus->ci->rambase); 3347 else if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase, 3348 (u8 *)fw->data, fw->size)) 3349 err = -EIO; 3350 3351 return err; 3352 } 3353 3354 static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus, 3355 void *vars, u32 varsz) 3356 { 3357 int address; 3358 int err; 3359 3360 brcmf_dbg(TRACE, "Enter\n"); 3361 3362 address = bus->ci->ramsize - varsz + bus->ci->rambase; 3363 err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, vars, varsz); 3364 if (err) 3365 brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n", 3366 err, varsz, address); 3367 else if (!brcmf_sdio_verifymemory(bus->sdiodev, address, vars, varsz)) 3368 err = -EIO; 3369 3370 return err; 3371 } 3372 3373 static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus, 3374 const struct firmware *fw, 3375 void *nvram, u32 nvlen) 3376 { 3377 int bcmerror; 3378 u32 rstvec; 3379 3380 sdio_claim_host(bus->sdiodev->func1); 3381 brcmf_sdio_clkctl(bus, CLK_AVAIL, false); 3382 3383 rstvec = get_unaligned_le32(fw->data); 3384 brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec); 3385 3386 bcmerror = brcmf_sdio_download_code_file(bus, fw); 3387 release_firmware(fw); 3388 if (bcmerror) { 3389 brcmf_err("dongle image file download failed\n"); 3390 brcmf_fw_nvram_free(nvram); 3391 goto err; 3392 } 3393 3394 bcmerror = brcmf_sdio_download_nvram(bus, nvram, nvlen); 3395 brcmf_fw_nvram_free(nvram); 3396 if (bcmerror) { 3397 brcmf_err("dongle nvram file download failed\n"); 3398 goto err; 3399 } 3400 3401 /* Take arm out of reset */ 3402 if (!brcmf_chip_set_active(bus->ci, rstvec)) { 3403 brcmf_err("error getting out of ARM core reset\n"); 3404 goto err; 3405 } 3406 3407 err: 3408 brcmf_sdio_clkctl(bus, CLK_SDONLY, false); 3409 sdio_release_host(bus->sdiodev->func1); 3410 return bcmerror; 3411 } 3412 3413 static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus) 3414 { 3415 if (bus->ci->chip == CY_CC_43012_CHIP_ID) 3416 return true; 3417 else 3418 return false; 3419 } 3420 3421 static void brcmf_sdio_sr_init(struct brcmf_sdio *bus) 3422 { 3423 int err = 0; 3424 u8 val; 3425 u8 wakeupctrl; 3426 u8 cardcap; 3427 u8 chipclkcsr; 3428 3429 brcmf_dbg(TRACE, "Enter\n"); 3430 3431 if (brcmf_chip_is_ulp(bus->ci)) { 3432 wakeupctrl = SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT; 3433 chipclkcsr = SBSDIO_HT_AVAIL_REQ; 3434 } else { 3435 wakeupctrl = SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT; 3436 chipclkcsr = SBSDIO_FORCE_HT; 3437 } 3438 3439 if (brcmf_sdio_aos_no_decode(bus)) { 3440 cardcap = SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC; 3441 } else { 3442 cardcap = (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | 3443 SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT); 3444 } 3445 3446 val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err); 3447 if (err) { 3448 brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n"); 3449 return; 3450 } 3451 val |= 1 << wakeupctrl; 3452 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err); 3453 if (err) { 3454 brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n"); 3455 return; 3456 } 3457 3458 /* Add CMD14 Support */ 3459 brcmf_sdiod_func0_wb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP, 3460 cardcap, 3461 &err); 3462 if (err) { 3463 brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n"); 3464 return; 3465 } 3466 3467 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 3468 chipclkcsr, &err); 3469 if (err) { 3470 brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n"); 3471 return; 3472 } 3473 3474 /* set flag */ 3475 bus->sr_enabled = true; 3476 brcmf_dbg(INFO, "SR enabled\n"); 3477 } 3478 3479 /* enable KSO bit */ 3480 static int brcmf_sdio_kso_init(struct brcmf_sdio *bus) 3481 { 3482 struct brcmf_core *core = bus->sdio_core; 3483 u8 val; 3484 int err = 0; 3485 3486 brcmf_dbg(TRACE, "Enter\n"); 3487 3488 /* KSO bit added in SDIO core rev 12 */ 3489 if (core->rev < 12) 3490 return 0; 3491 3492 val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err); 3493 if (err) { 3494 brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n"); 3495 return err; 3496 } 3497 3498 if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) { 3499 val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN << 3500 SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); 3501 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, 3502 val, &err); 3503 if (err) { 3504 brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n"); 3505 return err; 3506 } 3507 } 3508 3509 return 0; 3510 } 3511 3512 3513 static int brcmf_sdio_bus_preinit(struct device *dev) 3514 { 3515 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 3516 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 3517 struct brcmf_sdio *bus = sdiodev->bus; 3518 struct brcmf_core *core = bus->sdio_core; 3519 u32 value; 3520 int err; 3521 3522 /* maxctl provided by common layer */ 3523 if (WARN_ON(!bus_if->maxctl)) 3524 return -EINVAL; 3525 3526 /* Allocate control receive buffer */ 3527 bus_if->maxctl += bus->roundup; 3528 value = roundup((bus_if->maxctl + SDPCM_HDRLEN), ALIGNMENT); 3529 value += bus->head_align; 3530 bus->rxbuf = kmalloc(value, GFP_ATOMIC); 3531 if (bus->rxbuf) 3532 bus->rxblen = value; 3533 3534 /* the commands below use the terms tx and rx from 3535 * a device perspective, ie. bus:txglom affects the 3536 * bus transfers from device to host. 3537 */ 3538 if (core->rev < 12) { 3539 /* for sdio core rev < 12, disable txgloming */ 3540 value = 0; 3541 err = brcmf_iovar_data_set(dev, "bus:txglom", &value, 3542 sizeof(u32)); 3543 } else { 3544 /* otherwise, set txglomalign */ 3545 value = sdiodev->settings->bus.sdio.sd_sgentry_align; 3546 /* SDIO ADMA requires at least 32 bit alignment */ 3547 value = max_t(u32, value, ALIGNMENT); 3548 err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value, 3549 sizeof(u32)); 3550 } 3551 3552 if (err < 0) 3553 goto done; 3554 3555 bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; 3556 if (sdiodev->sg_support) { 3557 bus->txglom = false; 3558 value = 1; 3559 err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom", 3560 &value, sizeof(u32)); 3561 if (err < 0) { 3562 /* bus:rxglom is allowed to fail */ 3563 err = 0; 3564 } else { 3565 bus->txglom = true; 3566 bus->tx_hdrlen += SDPCM_HWEXT_LEN; 3567 } 3568 } 3569 brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen); 3570 3571 done: 3572 return err; 3573 } 3574 3575 static size_t brcmf_sdio_bus_get_ramsize(struct device *dev) 3576 { 3577 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 3578 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 3579 struct brcmf_sdio *bus = sdiodev->bus; 3580 3581 return bus->ci->ramsize - bus->ci->srsize; 3582 } 3583 3584 static int brcmf_sdio_bus_get_memdump(struct device *dev, void *data, 3585 size_t mem_size) 3586 { 3587 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 3588 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 3589 struct brcmf_sdio *bus = sdiodev->bus; 3590 int err; 3591 int address; 3592 int offset; 3593 int len; 3594 3595 brcmf_dbg(INFO, "dump at 0x%08x: size=%zu\n", bus->ci->rambase, 3596 mem_size); 3597 3598 address = bus->ci->rambase; 3599 offset = err = 0; 3600 sdio_claim_host(sdiodev->func1); 3601 while (offset < mem_size) { 3602 len = ((offset + MEMBLOCK) < mem_size) ? MEMBLOCK : 3603 mem_size - offset; 3604 err = brcmf_sdiod_ramrw(sdiodev, false, address, data, len); 3605 if (err) { 3606 brcmf_err("error %d on reading %d membytes at 0x%08x\n", 3607 err, len, address); 3608 goto done; 3609 } 3610 data += len; 3611 offset += len; 3612 address += len; 3613 } 3614 3615 done: 3616 sdio_release_host(sdiodev->func1); 3617 return err; 3618 } 3619 3620 void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus) 3621 { 3622 if (!bus->dpc_triggered) { 3623 bus->dpc_triggered = true; 3624 queue_work(bus->brcmf_wq, &bus->datawork); 3625 } 3626 } 3627 3628 void brcmf_sdio_isr(struct brcmf_sdio *bus, bool in_isr) 3629 { 3630 brcmf_dbg(TRACE, "Enter\n"); 3631 3632 if (!bus) { 3633 brcmf_err("bus is null pointer, exiting\n"); 3634 return; 3635 } 3636 3637 /* Count the interrupt call */ 3638 bus->sdcnt.intrcount++; 3639 if (in_isr) 3640 atomic_set(&bus->ipend, 1); 3641 else 3642 if (brcmf_sdio_intr_rstatus(bus)) { 3643 brcmf_err("failed backplane access\n"); 3644 } 3645 3646 /* Disable additional interrupts (is this needed now)? */ 3647 if (!bus->intr) 3648 brcmf_err("isr w/o interrupt configured!\n"); 3649 3650 bus->dpc_triggered = true; 3651 queue_work(bus->brcmf_wq, &bus->datawork); 3652 } 3653 3654 static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) 3655 { 3656 brcmf_dbg(TIMER, "Enter\n"); 3657 3658 /* Poll period: check device if appropriate. */ 3659 if (!bus->sr_enabled && 3660 bus->poll && (++bus->polltick >= bus->pollrate)) { 3661 u32 intstatus = 0; 3662 3663 /* Reset poll tick */ 3664 bus->polltick = 0; 3665 3666 /* Check device if no interrupts */ 3667 if (!bus->intr || 3668 (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) { 3669 3670 if (!bus->dpc_triggered) { 3671 u8 devpend; 3672 3673 sdio_claim_host(bus->sdiodev->func1); 3674 devpend = brcmf_sdiod_func0_rb(bus->sdiodev, 3675 SDIO_CCCR_INTx, NULL); 3676 sdio_release_host(bus->sdiodev->func1); 3677 intstatus = devpend & (INTR_STATUS_FUNC1 | 3678 INTR_STATUS_FUNC2); 3679 } 3680 3681 /* If there is something, make like the ISR and 3682 schedule the DPC */ 3683 if (intstatus) { 3684 bus->sdcnt.pollcnt++; 3685 atomic_set(&bus->ipend, 1); 3686 3687 bus->dpc_triggered = true; 3688 queue_work(bus->brcmf_wq, &bus->datawork); 3689 } 3690 } 3691 3692 /* Update interrupt tracking */ 3693 bus->sdcnt.lastintrs = bus->sdcnt.intrcount; 3694 } 3695 #ifdef DEBUG 3696 /* Poll for console output periodically */ 3697 if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() && 3698 bus->console_interval != 0) { 3699 bus->console.count += jiffies_to_msecs(BRCMF_WD_POLL); 3700 if (bus->console.count >= bus->console_interval) { 3701 bus->console.count -= bus->console_interval; 3702 sdio_claim_host(bus->sdiodev->func1); 3703 /* Make sure backplane clock is on */ 3704 brcmf_sdio_bus_sleep(bus, false, false); 3705 if (brcmf_sdio_readconsole(bus) < 0) 3706 /* stop on error */ 3707 bus->console_interval = 0; 3708 sdio_release_host(bus->sdiodev->func1); 3709 } 3710 } 3711 #endif /* DEBUG */ 3712 3713 /* On idle timeout clear activity flag and/or turn off clock */ 3714 if (!bus->dpc_triggered) { 3715 rmb(); 3716 if ((!bus->dpc_running) && (bus->idletime > 0) && 3717 (bus->clkstate == CLK_AVAIL)) { 3718 bus->idlecount++; 3719 if (bus->idlecount > bus->idletime) { 3720 brcmf_dbg(SDIO, "idle\n"); 3721 sdio_claim_host(bus->sdiodev->func1); 3722 #ifdef DEBUG 3723 if (!BRCMF_FWCON_ON() || 3724 bus->console_interval == 0) 3725 #endif 3726 brcmf_sdio_wd_timer(bus, false); 3727 bus->idlecount = 0; 3728 brcmf_sdio_bus_sleep(bus, true, false); 3729 sdio_release_host(bus->sdiodev->func1); 3730 } 3731 } else { 3732 bus->idlecount = 0; 3733 } 3734 } else { 3735 bus->idlecount = 0; 3736 } 3737 } 3738 3739 static void brcmf_sdio_dataworker(struct work_struct *work) 3740 { 3741 struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio, 3742 datawork); 3743 3744 bus->dpc_running = true; 3745 wmb(); 3746 while (READ_ONCE(bus->dpc_triggered)) { 3747 bus->dpc_triggered = false; 3748 brcmf_sdio_dpc(bus); 3749 bus->idlecount = 0; 3750 } 3751 bus->dpc_running = false; 3752 if (brcmf_sdiod_freezing(bus->sdiodev)) { 3753 brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN); 3754 brcmf_sdiod_try_freeze(bus->sdiodev); 3755 brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA); 3756 } 3757 } 3758 3759 static void 3760 brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, 3761 struct brcmf_chip *ci, u32 drivestrength) 3762 { 3763 const struct sdiod_drive_str *str_tab = NULL; 3764 u32 str_mask; 3765 u32 str_shift; 3766 u32 i; 3767 u32 drivestrength_sel = 0; 3768 u32 cc_data_temp; 3769 u32 addr; 3770 3771 if (!(ci->cc_caps & CC_CAP_PMU)) 3772 return; 3773 3774 switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) { 3775 case SDIOD_DRVSTR_KEY(BRCM_CC_4330_CHIP_ID, 12): 3776 str_tab = sdiod_drvstr_tab1_1v8; 3777 str_mask = 0x00003800; 3778 str_shift = 11; 3779 break; 3780 case SDIOD_DRVSTR_KEY(BRCM_CC_4334_CHIP_ID, 17): 3781 str_tab = sdiod_drvstr_tab6_1v8; 3782 str_mask = 0x00001800; 3783 str_shift = 11; 3784 break; 3785 case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17): 3786 /* note: 43143 does not support tristate */ 3787 i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1; 3788 if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) { 3789 str_tab = sdiod_drvstr_tab2_3v3; 3790 str_mask = 0x00000007; 3791 str_shift = 0; 3792 } else 3793 brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n", 3794 ci->name, drivestrength); 3795 break; 3796 case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13): 3797 str_tab = sdiod_drive_strength_tab5_1v8; 3798 str_mask = 0x00003800; 3799 str_shift = 11; 3800 break; 3801 default: 3802 brcmf_dbg(INFO, "No SDIO driver strength init needed for chip %s rev %d pmurev %d\n", 3803 ci->name, ci->chiprev, ci->pmurev); 3804 break; 3805 } 3806 3807 if (str_tab != NULL) { 3808 struct brcmf_core *pmu = brcmf_chip_get_pmu(ci); 3809 3810 for (i = 0; str_tab[i].strength != 0; i++) { 3811 if (drivestrength >= str_tab[i].strength) { 3812 drivestrength_sel = str_tab[i].sel; 3813 break; 3814 } 3815 } 3816 addr = CORE_CC_REG(pmu->base, chipcontrol_addr); 3817 brcmf_sdiod_writel(sdiodev, addr, 1, NULL); 3818 cc_data_temp = brcmf_sdiod_readl(sdiodev, addr, NULL); 3819 cc_data_temp &= ~str_mask; 3820 drivestrength_sel <<= str_shift; 3821 cc_data_temp |= drivestrength_sel; 3822 brcmf_sdiod_writel(sdiodev, addr, cc_data_temp, NULL); 3823 3824 brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n", 3825 str_tab[i].strength, drivestrength, cc_data_temp); 3826 } 3827 } 3828 3829 static int brcmf_sdio_buscoreprep(void *ctx) 3830 { 3831 struct brcmf_sdio_dev *sdiodev = ctx; 3832 int err = 0; 3833 u8 clkval, clkset; 3834 3835 /* Try forcing SDIO core to do ALPAvail request only */ 3836 clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; 3837 brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); 3838 if (err) { 3839 brcmf_err("error writing for HT off\n"); 3840 return err; 3841 } 3842 3843 /* If register supported, wait for ALPAvail and then force ALP */ 3844 /* This may take up to 15 milliseconds */ 3845 clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, NULL); 3846 3847 if ((clkval & ~SBSDIO_AVBITS) != clkset) { 3848 brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", 3849 clkset, clkval); 3850 return -EACCES; 3851 } 3852 3853 SPINWAIT(((clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 3854 NULL)), 3855 !SBSDIO_ALPAV(clkval)), 3856 PMU_MAX_TRANSITION_DLY); 3857 3858 if (!SBSDIO_ALPAV(clkval)) { 3859 brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n", 3860 clkval); 3861 return -EBUSY; 3862 } 3863 3864 clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; 3865 brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); 3866 udelay(65); 3867 3868 /* Also, disable the extra SDIO pull-ups */ 3869 brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); 3870 3871 return 0; 3872 } 3873 3874 static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip, 3875 u32 rstvec) 3876 { 3877 struct brcmf_sdio_dev *sdiodev = ctx; 3878 struct brcmf_core *core = sdiodev->bus->sdio_core; 3879 u32 reg_addr; 3880 3881 /* clear all interrupts */ 3882 reg_addr = core->base + SD_REG(intstatus); 3883 brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL); 3884 3885 if (rstvec) 3886 /* Write reset vector to address 0 */ 3887 brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec, 3888 sizeof(rstvec)); 3889 } 3890 3891 static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr) 3892 { 3893 struct brcmf_sdio_dev *sdiodev = ctx; 3894 u32 val, rev; 3895 3896 val = brcmf_sdiod_readl(sdiodev, addr, NULL); 3897 3898 /* 3899 * this is a bit of special handling if reading the chipcommon chipid 3900 * register. The 4339 is a next-gen of the 4335. It uses the same 3901 * SDIO device id as 4335 and the chipid register returns 4335 as well. 3902 * It can be identified as 4339 by looking at the chip revision. It 3903 * is corrected here so the chip.c module has the right info. 3904 */ 3905 if (addr == CORE_CC_REG(SI_ENUM_BASE, chipid) && 3906 (sdiodev->func1->device == SDIO_DEVICE_ID_BROADCOM_4339 || 3907 sdiodev->func1->device == SDIO_DEVICE_ID_BROADCOM_4335_4339)) { 3908 rev = (val & CID_REV_MASK) >> CID_REV_SHIFT; 3909 if (rev >= 2) { 3910 val &= ~CID_ID_MASK; 3911 val |= BRCM_CC_4339_CHIP_ID; 3912 } 3913 } 3914 3915 return val; 3916 } 3917 3918 static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val) 3919 { 3920 struct brcmf_sdio_dev *sdiodev = ctx; 3921 3922 brcmf_sdiod_writel(sdiodev, addr, val, NULL); 3923 } 3924 3925 static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = { 3926 .prepare = brcmf_sdio_buscoreprep, 3927 .activate = brcmf_sdio_buscore_activate, 3928 .read32 = brcmf_sdio_buscore_read32, 3929 .write32 = brcmf_sdio_buscore_write32, 3930 }; 3931 3932 static bool 3933 brcmf_sdio_probe_attach(struct brcmf_sdio *bus) 3934 { 3935 struct brcmf_sdio_dev *sdiodev; 3936 u8 clkctl = 0; 3937 int err = 0; 3938 int reg_addr; 3939 u32 reg_val; 3940 u32 drivestrength; 3941 3942 sdiodev = bus->sdiodev; 3943 sdio_claim_host(sdiodev->func1); 3944 3945 pr_debug("F1 signature read @0x18000000=0x%4x\n", 3946 brcmf_sdiod_readl(sdiodev, SI_ENUM_BASE, NULL)); 3947 3948 /* 3949 * Force PLL off until brcmf_chip_attach() 3950 * programs PLL control regs 3951 */ 3952 3953 brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, BRCMF_INIT_CLKCTL1, 3954 &err); 3955 if (!err) 3956 clkctl = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 3957 &err); 3958 3959 if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { 3960 brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n", 3961 err, BRCMF_INIT_CLKCTL1, clkctl); 3962 goto fail; 3963 } 3964 3965 bus->ci = brcmf_chip_attach(sdiodev, &brcmf_sdio_buscore_ops); 3966 if (IS_ERR(bus->ci)) { 3967 brcmf_err("brcmf_chip_attach failed!\n"); 3968 bus->ci = NULL; 3969 goto fail; 3970 } 3971 3972 /* Pick up the SDIO core info struct from chip.c */ 3973 bus->sdio_core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); 3974 if (!bus->sdio_core) 3975 goto fail; 3976 3977 /* Pick up the CHIPCOMMON core info struct, for bulk IO in bcmsdh.c */ 3978 sdiodev->cc_core = brcmf_chip_get_core(bus->ci, BCMA_CORE_CHIPCOMMON); 3979 if (!sdiodev->cc_core) 3980 goto fail; 3981 3982 sdiodev->settings = brcmf_get_module_param(sdiodev->dev, 3983 BRCMF_BUSTYPE_SDIO, 3984 bus->ci->chip, 3985 bus->ci->chiprev); 3986 if (!sdiodev->settings) { 3987 brcmf_err("Failed to get device parameters\n"); 3988 goto fail; 3989 } 3990 /* platform specific configuration: 3991 * alignments must be at least 4 bytes for ADMA 3992 */ 3993 bus->head_align = ALIGNMENT; 3994 bus->sgentry_align = ALIGNMENT; 3995 if (sdiodev->settings->bus.sdio.sd_head_align > ALIGNMENT) 3996 bus->head_align = sdiodev->settings->bus.sdio.sd_head_align; 3997 if (sdiodev->settings->bus.sdio.sd_sgentry_align > ALIGNMENT) 3998 bus->sgentry_align = 3999 sdiodev->settings->bus.sdio.sd_sgentry_align; 4000 4001 /* allocate scatter-gather table. sg support 4002 * will be disabled upon allocation failure. 4003 */ 4004 brcmf_sdiod_sgtable_alloc(sdiodev); 4005 4006 #ifdef CONFIG_PM_SLEEP 4007 /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ 4008 * is true or when platform data OOB irq is true). 4009 */ 4010 if ((sdio_get_host_pm_caps(sdiodev->func1) & MMC_PM_KEEP_POWER) && 4011 ((sdio_get_host_pm_caps(sdiodev->func1) & MMC_PM_WAKE_SDIO_IRQ) || 4012 (sdiodev->settings->bus.sdio.oob_irq_supported))) 4013 sdiodev->bus_if->wowl_supported = true; 4014 #endif 4015 4016 if (brcmf_sdio_kso_init(bus)) { 4017 brcmf_err("error enabling KSO\n"); 4018 goto fail; 4019 } 4020 4021 if (sdiodev->settings->bus.sdio.drive_strength) 4022 drivestrength = sdiodev->settings->bus.sdio.drive_strength; 4023 else 4024 drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH; 4025 brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength); 4026 4027 /* Set card control so an SDIO card reset does a WLAN backplane reset */ 4028 reg_val = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err); 4029 if (err) 4030 goto fail; 4031 4032 reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET; 4033 4034 brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); 4035 if (err) 4036 goto fail; 4037 4038 /* set PMUControl so a backplane reset does PMU state reload */ 4039 reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol); 4040 reg_val = brcmf_sdiod_readl(sdiodev, reg_addr, &err); 4041 if (err) 4042 goto fail; 4043 4044 reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); 4045 4046 brcmf_sdiod_writel(sdiodev, reg_addr, reg_val, &err); 4047 if (err) 4048 goto fail; 4049 4050 sdio_release_host(sdiodev->func1); 4051 4052 brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); 4053 4054 /* allocate header buffer */ 4055 bus->hdrbuf = kzalloc(MAX_HDR_READ + bus->head_align, GFP_KERNEL); 4056 if (!bus->hdrbuf) 4057 return false; 4058 /* Locate an appropriately-aligned portion of hdrbuf */ 4059 bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0], 4060 bus->head_align); 4061 4062 /* Set the poll and/or interrupt flags */ 4063 bus->intr = true; 4064 bus->poll = false; 4065 if (bus->poll) 4066 bus->pollrate = 1; 4067 4068 return true; 4069 4070 fail: 4071 sdio_release_host(sdiodev->func1); 4072 return false; 4073 } 4074 4075 static int 4076 brcmf_sdio_watchdog_thread(void *data) 4077 { 4078 struct brcmf_sdio *bus = (struct brcmf_sdio *)data; 4079 int wait; 4080 4081 allow_signal(SIGTERM); 4082 /* Run until signal received */ 4083 brcmf_sdiod_freezer_count(bus->sdiodev); 4084 while (1) { 4085 if (kthread_should_stop()) 4086 break; 4087 brcmf_sdiod_freezer_uncount(bus->sdiodev); 4088 wait = wait_for_completion_interruptible(&bus->watchdog_wait); 4089 brcmf_sdiod_freezer_count(bus->sdiodev); 4090 brcmf_sdiod_try_freeze(bus->sdiodev); 4091 if (!wait) { 4092 brcmf_sdio_bus_watchdog(bus); 4093 /* Count the tick for reference */ 4094 bus->sdcnt.tickcnt++; 4095 reinit_completion(&bus->watchdog_wait); 4096 } else 4097 break; 4098 } 4099 return 0; 4100 } 4101 4102 static void 4103 brcmf_sdio_watchdog(struct timer_list *t) 4104 { 4105 struct brcmf_sdio *bus = from_timer(bus, t, timer); 4106 4107 if (bus->watchdog_tsk) { 4108 complete(&bus->watchdog_wait); 4109 /* Reschedule the watchdog */ 4110 if (bus->wd_active) 4111 mod_timer(&bus->timer, 4112 jiffies + BRCMF_WD_POLL); 4113 } 4114 } 4115 4116 static 4117 int brcmf_sdio_get_fwname(struct device *dev, const char *ext, u8 *fw_name) 4118 { 4119 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 4120 struct brcmf_fw_request *fwreq; 4121 struct brcmf_fw_name fwnames[] = { 4122 { ext, fw_name }, 4123 }; 4124 4125 fwreq = brcmf_fw_alloc_request(bus_if->chip, bus_if->chiprev, 4126 brcmf_sdio_fwnames, 4127 ARRAY_SIZE(brcmf_sdio_fwnames), 4128 fwnames, ARRAY_SIZE(fwnames)); 4129 if (!fwreq) 4130 return -ENOMEM; 4131 4132 kfree(fwreq); 4133 return 0; 4134 } 4135 4136 static int brcmf_sdio_bus_reset(struct device *dev) 4137 { 4138 int ret = 0; 4139 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 4140 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; 4141 4142 brcmf_dbg(SDIO, "Enter\n"); 4143 4144 /* start by unregistering irqs */ 4145 brcmf_sdiod_intr_unregister(sdiodev); 4146 4147 brcmf_sdiod_remove(sdiodev); 4148 4149 /* reset the adapter */ 4150 sdio_claim_host(sdiodev->func1); 4151 mmc_hw_reset(sdiodev->func1->card->host); 4152 sdio_release_host(sdiodev->func1); 4153 4154 brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_DOWN); 4155 4156 ret = brcmf_sdiod_probe(sdiodev); 4157 if (ret) { 4158 brcmf_err("Failed to probe after sdio device reset: ret %d\n", 4159 ret); 4160 brcmf_sdiod_remove(sdiodev); 4161 } 4162 4163 return ret; 4164 } 4165 4166 static const struct brcmf_bus_ops brcmf_sdio_bus_ops = { 4167 .stop = brcmf_sdio_bus_stop, 4168 .preinit = brcmf_sdio_bus_preinit, 4169 .txdata = brcmf_sdio_bus_txdata, 4170 .txctl = brcmf_sdio_bus_txctl, 4171 .rxctl = brcmf_sdio_bus_rxctl, 4172 .gettxq = brcmf_sdio_bus_gettxq, 4173 .wowl_config = brcmf_sdio_wowl_config, 4174 .get_ramsize = brcmf_sdio_bus_get_ramsize, 4175 .get_memdump = brcmf_sdio_bus_get_memdump, 4176 .get_fwname = brcmf_sdio_get_fwname, 4177 .debugfs_create = brcmf_sdio_debugfs_create, 4178 .reset = brcmf_sdio_bus_reset 4179 }; 4180 4181 #define BRCMF_SDIO_FW_CODE 0 4182 #define BRCMF_SDIO_FW_NVRAM 1 4183 4184 static void brcmf_sdio_firmware_callback(struct device *dev, int err, 4185 struct brcmf_fw_request *fwreq) 4186 { 4187 struct brcmf_bus *bus_if = dev_get_drvdata(dev); 4188 struct brcmf_sdio_dev *sdiod = bus_if->bus_priv.sdio; 4189 struct brcmf_sdio *bus = sdiod->bus; 4190 struct brcmf_core *core = bus->sdio_core; 4191 const struct firmware *code; 4192 void *nvram; 4193 u32 nvram_len; 4194 u8 saveclk, bpreq; 4195 u8 devctl; 4196 4197 brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err); 4198 4199 if (err) 4200 goto fail; 4201 4202 code = fwreq->items[BRCMF_SDIO_FW_CODE].binary; 4203 nvram = fwreq->items[BRCMF_SDIO_FW_NVRAM].nv_data.data; 4204 nvram_len = fwreq->items[BRCMF_SDIO_FW_NVRAM].nv_data.len; 4205 kfree(fwreq); 4206 4207 /* try to download image and nvram to the dongle */ 4208 bus->alp_only = true; 4209 err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len); 4210 if (err) 4211 goto fail; 4212 bus->alp_only = false; 4213 4214 /* Start the watchdog timer */ 4215 bus->sdcnt.tickcnt = 0; 4216 brcmf_sdio_wd_timer(bus, true); 4217 4218 sdio_claim_host(sdiod->func1); 4219 4220 /* Make sure backplane clock is on, needed to generate F2 interrupt */ 4221 brcmf_sdio_clkctl(bus, CLK_AVAIL, false); 4222 if (bus->clkstate != CLK_AVAIL) 4223 goto release; 4224 4225 /* Force clocks on backplane to be sure F2 interrupt propagates */ 4226 saveclk = brcmf_sdiod_readb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, &err); 4227 if (!err) { 4228 bpreq = saveclk; 4229 bpreq |= brcmf_chip_is_ulp(bus->ci) ? 4230 SBSDIO_HT_AVAIL_REQ : SBSDIO_FORCE_HT; 4231 brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, 4232 bpreq, &err); 4233 } 4234 if (err) { 4235 brcmf_err("Failed to force clock for F2: err %d\n", err); 4236 goto release; 4237 } 4238 4239 /* Enable function 2 (frame transfers) */ 4240 brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailboxdata), 4241 SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL); 4242 4243 err = sdio_enable_func(sdiod->func2); 4244 4245 brcmf_dbg(INFO, "enable F2: err=%d\n", err); 4246 4247 /* If F2 successfully enabled, set core and enable interrupts */ 4248 if (!err) { 4249 /* Set up the interrupt mask and enable interrupts */ 4250 bus->hostintmask = HOSTINTMASK; 4251 brcmf_sdiod_writel(sdiod, core->base + SD_REG(hostintmask), 4252 bus->hostintmask, NULL); 4253 4254 switch (sdiod->func1->device) { 4255 case SDIO_DEVICE_ID_BROADCOM_CYPRESS_4373: 4256 brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n", 4257 CY_4373_F2_WATERMARK); 4258 brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 4259 CY_4373_F2_WATERMARK, &err); 4260 devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL, 4261 &err); 4262 devctl |= SBSDIO_DEVCTL_F2WM_ENAB; 4263 brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl, 4264 &err); 4265 brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL, 4266 CY_4373_F1_MESBUSYCTRL, &err); 4267 break; 4268 case SDIO_DEVICE_ID_BROADCOM_CYPRESS_43012: 4269 brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n", 4270 CY_43012_F2_WATERMARK); 4271 brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 4272 CY_43012_F2_WATERMARK, &err); 4273 devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL, 4274 &err); 4275 devctl |= SBSDIO_DEVCTL_F2WM_ENAB; 4276 brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl, 4277 &err); 4278 brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL, 4279 CY_43012_MESBUSYCTRL, &err); 4280 break; 4281 case SDIO_DEVICE_ID_BROADCOM_4329: 4282 case SDIO_DEVICE_ID_BROADCOM_4339: 4283 brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n", 4284 CY_4339_F2_WATERMARK); 4285 brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 4286 CY_4339_F2_WATERMARK, &err); 4287 devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL, 4288 &err); 4289 devctl |= SBSDIO_DEVCTL_F2WM_ENAB; 4290 brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl, 4291 &err); 4292 brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL, 4293 CY_4339_MESBUSYCTRL, &err); 4294 break; 4295 case SDIO_DEVICE_ID_BROADCOM_43455: 4296 brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n", 4297 CY_43455_F2_WATERMARK); 4298 brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 4299 CY_43455_F2_WATERMARK, &err); 4300 devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL, 4301 &err); 4302 devctl |= SBSDIO_DEVCTL_F2WM_ENAB; 4303 brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl, 4304 &err); 4305 brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL, 4306 CY_43455_MESBUSYCTRL, &err); 4307 break; 4308 case SDIO_DEVICE_ID_BROADCOM_4359: 4309 case SDIO_DEVICE_ID_BROADCOM_4354: 4310 case SDIO_DEVICE_ID_BROADCOM_4356: 4311 brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n", 4312 CY_435X_F2_WATERMARK); 4313 brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 4314 CY_435X_F2_WATERMARK, &err); 4315 devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL, 4316 &err); 4317 devctl |= SBSDIO_DEVCTL_F2WM_ENAB; 4318 brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl, 4319 &err); 4320 brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL, 4321 CY_435X_F1_MESBUSYCTRL, &err); 4322 break; 4323 default: 4324 brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 4325 DEFAULT_F2_WATERMARK, &err); 4326 break; 4327 } 4328 } else { 4329 /* Disable F2 again */ 4330 sdio_disable_func(sdiod->func2); 4331 goto checkdied; 4332 } 4333 4334 if (brcmf_chip_sr_capable(bus->ci)) { 4335 brcmf_sdio_sr_init(bus); 4336 } else { 4337 /* Restore previous clock setting */ 4338 brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, 4339 saveclk, &err); 4340 } 4341 4342 if (err == 0) { 4343 /* Assign bus interface call back */ 4344 sdiod->bus_if->dev = sdiod->dev; 4345 sdiod->bus_if->ops = &brcmf_sdio_bus_ops; 4346 sdiod->bus_if->chip = bus->ci->chip; 4347 sdiod->bus_if->chiprev = bus->ci->chiprev; 4348 4349 /* Allow full data communication using DPC from now on. */ 4350 brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA); 4351 4352 err = brcmf_sdiod_intr_register(sdiod); 4353 if (err != 0) 4354 brcmf_err("intr register failed:%d\n", err); 4355 } 4356 4357 /* If we didn't come up, turn off backplane clock */ 4358 if (err != 0) { 4359 brcmf_sdio_clkctl(bus, CLK_NONE, false); 4360 goto checkdied; 4361 } 4362 4363 sdio_release_host(sdiod->func1); 4364 4365 err = brcmf_alloc(sdiod->dev, sdiod->settings); 4366 if (err) { 4367 brcmf_err("brcmf_alloc failed\n"); 4368 goto claim; 4369 } 4370 4371 /* Attach to the common layer, reserve hdr space */ 4372 err = brcmf_attach(sdiod->dev); 4373 if (err != 0) { 4374 brcmf_err("brcmf_attach failed\n"); 4375 goto free; 4376 } 4377 4378 /* ready */ 4379 return; 4380 4381 free: 4382 brcmf_free(sdiod->dev); 4383 claim: 4384 sdio_claim_host(sdiod->func1); 4385 checkdied: 4386 brcmf_sdio_checkdied(bus); 4387 release: 4388 sdio_release_host(sdiod->func1); 4389 fail: 4390 brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err); 4391 device_release_driver(&sdiod->func2->dev); 4392 device_release_driver(dev); 4393 } 4394 4395 static struct brcmf_fw_request * 4396 brcmf_sdio_prepare_fw_request(struct brcmf_sdio *bus) 4397 { 4398 struct brcmf_fw_request *fwreq; 4399 struct brcmf_fw_name fwnames[] = { 4400 { ".bin", bus->sdiodev->fw_name }, 4401 { ".txt", bus->sdiodev->nvram_name }, 4402 }; 4403 4404 fwreq = brcmf_fw_alloc_request(bus->ci->chip, bus->ci->chiprev, 4405 brcmf_sdio_fwnames, 4406 ARRAY_SIZE(brcmf_sdio_fwnames), 4407 fwnames, ARRAY_SIZE(fwnames)); 4408 if (!fwreq) 4409 return NULL; 4410 4411 fwreq->items[BRCMF_SDIO_FW_CODE].type = BRCMF_FW_TYPE_BINARY; 4412 fwreq->items[BRCMF_SDIO_FW_NVRAM].type = BRCMF_FW_TYPE_NVRAM; 4413 fwreq->board_type = bus->sdiodev->settings->board_type; 4414 4415 return fwreq; 4416 } 4417 4418 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) 4419 { 4420 int ret; 4421 struct brcmf_sdio *bus; 4422 struct workqueue_struct *wq; 4423 struct brcmf_fw_request *fwreq; 4424 4425 brcmf_dbg(TRACE, "Enter\n"); 4426 4427 /* Allocate private bus interface state */ 4428 bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC); 4429 if (!bus) 4430 goto fail; 4431 4432 bus->sdiodev = sdiodev; 4433 sdiodev->bus = bus; 4434 skb_queue_head_init(&bus->glom); 4435 bus->txbound = BRCMF_TXBOUND; 4436 bus->rxbound = BRCMF_RXBOUND; 4437 bus->txminmax = BRCMF_TXMINMAX; 4438 bus->tx_seq = SDPCM_SEQ_WRAP - 1; 4439 4440 /* single-threaded workqueue */ 4441 wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM, 4442 dev_name(&sdiodev->func1->dev)); 4443 if (!wq) { 4444 brcmf_err("insufficient memory to create txworkqueue\n"); 4445 goto fail; 4446 } 4447 brcmf_sdiod_freezer_count(sdiodev); 4448 INIT_WORK(&bus->datawork, brcmf_sdio_dataworker); 4449 bus->brcmf_wq = wq; 4450 4451 /* attempt to attach to the dongle */ 4452 if (!(brcmf_sdio_probe_attach(bus))) { 4453 brcmf_err("brcmf_sdio_probe_attach failed\n"); 4454 goto fail; 4455 } 4456 4457 spin_lock_init(&bus->rxctl_lock); 4458 spin_lock_init(&bus->txq_lock); 4459 init_waitqueue_head(&bus->ctrl_wait); 4460 init_waitqueue_head(&bus->dcmd_resp_wait); 4461 4462 /* Set up the watchdog timer */ 4463 timer_setup(&bus->timer, brcmf_sdio_watchdog, 0); 4464 /* Initialize watchdog thread */ 4465 init_completion(&bus->watchdog_wait); 4466 bus->watchdog_tsk = kthread_run(brcmf_sdio_watchdog_thread, 4467 bus, "brcmf_wdog/%s", 4468 dev_name(&sdiodev->func1->dev)); 4469 if (IS_ERR(bus->watchdog_tsk)) { 4470 pr_warn("brcmf_watchdog thread failed to start\n"); 4471 bus->watchdog_tsk = NULL; 4472 } 4473 /* Initialize DPC thread */ 4474 bus->dpc_triggered = false; 4475 bus->dpc_running = false; 4476 4477 /* default sdio bus header length for tx packet */ 4478 bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; 4479 4480 /* Query the F2 block size, set roundup accordingly */ 4481 bus->blocksize = bus->sdiodev->func2->cur_blksize; 4482 bus->roundup = min(max_roundup, bus->blocksize); 4483 4484 sdio_claim_host(bus->sdiodev->func1); 4485 4486 /* Disable F2 to clear any intermediate frame state on the dongle */ 4487 sdio_disable_func(bus->sdiodev->func2); 4488 4489 bus->rxflow = false; 4490 4491 /* Done with backplane-dependent accesses, can drop clock... */ 4492 brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); 4493 4494 sdio_release_host(bus->sdiodev->func1); 4495 4496 /* ...and initialize clock/power states */ 4497 bus->clkstate = CLK_SDONLY; 4498 bus->idletime = BRCMF_IDLE_INTERVAL; 4499 bus->idleclock = BRCMF_IDLE_ACTIVE; 4500 4501 /* SR state */ 4502 bus->sr_enabled = false; 4503 4504 brcmf_dbg(INFO, "completed!!\n"); 4505 4506 fwreq = brcmf_sdio_prepare_fw_request(bus); 4507 if (!fwreq) { 4508 ret = -ENOMEM; 4509 goto fail; 4510 } 4511 4512 ret = brcmf_fw_get_firmwares(sdiodev->dev, fwreq, 4513 brcmf_sdio_firmware_callback); 4514 if (ret != 0) { 4515 brcmf_err("async firmware request failed: %d\n", ret); 4516 kfree(fwreq); 4517 goto fail; 4518 } 4519 4520 return bus; 4521 4522 fail: 4523 brcmf_sdio_remove(bus); 4524 return NULL; 4525 } 4526 4527 /* Detach and free everything */ 4528 void brcmf_sdio_remove(struct brcmf_sdio *bus) 4529 { 4530 brcmf_dbg(TRACE, "Enter\n"); 4531 4532 if (bus) { 4533 /* Stop watchdog task */ 4534 if (bus->watchdog_tsk) { 4535 send_sig(SIGTERM, bus->watchdog_tsk, 1); 4536 kthread_stop(bus->watchdog_tsk); 4537 bus->watchdog_tsk = NULL; 4538 } 4539 4540 /* De-register interrupt handler */ 4541 brcmf_sdiod_intr_unregister(bus->sdiodev); 4542 4543 brcmf_detach(bus->sdiodev->dev); 4544 4545 cancel_work_sync(&bus->datawork); 4546 if (bus->brcmf_wq) 4547 destroy_workqueue(bus->brcmf_wq); 4548 4549 if (bus->ci) { 4550 if (bus->sdiodev->state != BRCMF_SDIOD_NOMEDIUM) { 4551 sdio_claim_host(bus->sdiodev->func1); 4552 brcmf_sdio_wd_timer(bus, false); 4553 brcmf_sdio_clkctl(bus, CLK_AVAIL, false); 4554 /* Leave the device in state where it is 4555 * 'passive'. This is done by resetting all 4556 * necessary cores. 4557 */ 4558 msleep(20); 4559 brcmf_chip_set_passive(bus->ci); 4560 brcmf_sdio_clkctl(bus, CLK_NONE, false); 4561 sdio_release_host(bus->sdiodev->func1); 4562 } 4563 brcmf_chip_detach(bus->ci); 4564 } 4565 if (bus->sdiodev->settings) 4566 brcmf_release_module_param(bus->sdiodev->settings); 4567 4568 kfree(bus->rxbuf); 4569 kfree(bus->hdrbuf); 4570 kfree(bus); 4571 } 4572 4573 brcmf_dbg(TRACE, "Disconnected\n"); 4574 } 4575 4576 void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active) 4577 { 4578 /* Totally stop the timer */ 4579 if (!active && bus->wd_active) { 4580 del_timer_sync(&bus->timer); 4581 bus->wd_active = false; 4582 return; 4583 } 4584 4585 /* don't start the wd until fw is loaded */ 4586 if (bus->sdiodev->state != BRCMF_SDIOD_DATA) 4587 return; 4588 4589 if (active) { 4590 if (!bus->wd_active) { 4591 /* Create timer again when watchdog period is 4592 dynamically changed or in the first instance 4593 */ 4594 bus->timer.expires = jiffies + BRCMF_WD_POLL; 4595 add_timer(&bus->timer); 4596 bus->wd_active = true; 4597 } else { 4598 /* Re arm the timer, at last watchdog period */ 4599 mod_timer(&bus->timer, jiffies + BRCMF_WD_POLL); 4600 } 4601 } 4602 } 4603 4604 int brcmf_sdio_sleep(struct brcmf_sdio *bus, bool sleep) 4605 { 4606 int ret; 4607 4608 sdio_claim_host(bus->sdiodev->func1); 4609 ret = brcmf_sdio_bus_sleep(bus, sleep, false); 4610 sdio_release_host(bus->sdiodev->func1); 4611 4612 return ret; 4613 } 4614 4615