1 #ifndef LINUX_B43_PHY_A_H_ 2 #define LINUX_B43_PHY_A_H_ 3 4 #include "phy_common.h" 5 6 7 /* OFDM (A) PHY Registers */ 8 #define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */ 9 #define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */ 10 #define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ 11 #define B43_PHY_BBANDCFG_RXANT_SHIFT 7 12 #define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */ 13 #define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */ 14 #define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */ 15 #define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */ 16 #define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */ 17 #define B43_PHY_CRS0 B43_PHY_OFDM(0x29) 18 #define B43_PHY_CRS0_EN 0x4000 19 #define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30) 20 #define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */ 21 #define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ 22 #define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ 23 #define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */ 24 #define B43_PHY_LMS B43_PHY_OFDM(0x55) 25 #define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */ 26 #define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */ 27 #define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */ 28 #define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */ 29 #define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */ 30 #define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ 31 #define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ 32 #define B43_PHY_OTABLENR_SHIFT 10 33 #define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */ 34 #define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */ 35 #define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */ 36 #define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */ 37 #define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B) 38 #define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */ 39 #define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */ 40 #define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */ 41 #define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ 42 #define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */ 43 #define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */ 44 #define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0) 45 #define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1) 46 #define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2) 47 #define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3) 48 #define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4) 49 #define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */ 50 #define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */ 51 #define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */ 52 #define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9) 53 #define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA) 54 #define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB) 55 #define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */ 56 #define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */ 57 #define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */ 58 #define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */ 59 #define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */ 60 #define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */ 61 #define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */ 62 63 /*** OFDM table numbers ***/ 64 #define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset)) 65 #define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0) 66 #define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0) 67 #define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename 68 #define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4) 69 #define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0) 70 #define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3) 71 #define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0) 72 #define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0) 73 #define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0) 74 #define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0) 75 #define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0) 76 #define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0) 77 #define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0) 78 #define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0) 79 #define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7) 80 #define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12) 81 #define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13) 82 #define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename 83 #define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename 84 #define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12) 85 #define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0) 86 #define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename 87 #define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0) 88 #define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove! 89 #define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0) 90 #define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0) 91 #define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4) 92 #define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0) 93 #define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0) 94 #define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0) 95 #define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0) 96 97 u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset); 98 void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, 99 u16 offset, u16 value); 100 u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset); 101 void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, 102 u16 offset, u32 value); 103 104 #endif /* LINUX_B43_PHY_A_H_ */ 105