1 /* 2 * Copyright (c) 2012-2017 Qualcomm Atheros, Inc. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15 */ 16 17 #include <linux/module.h> 18 #include <linux/pci.h> 19 #include <linux/moduleparam.h> 20 #include <linux/interrupt.h> 21 #include <linux/suspend.h> 22 #include "wil6210.h" 23 #include <linux/rtnetlink.h> 24 25 static bool use_msi = true; 26 module_param(use_msi, bool, 0444); 27 MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true"); 28 29 static bool ftm_mode; 30 module_param(ftm_mode, bool, 0444); 31 MODULE_PARM_DESC(ftm_mode, " Set factory test mode, default - false"); 32 33 #ifdef CONFIG_PM 34 #ifdef CONFIG_PM_SLEEP 35 static int wil6210_pm_notify(struct notifier_block *notify_block, 36 unsigned long mode, void *unused); 37 #endif /* CONFIG_PM_SLEEP */ 38 #endif /* CONFIG_PM */ 39 40 static 41 void wil_set_capabilities(struct wil6210_priv *wil) 42 { 43 const char *wil_fw_name; 44 u32 jtag_id = wil_r(wil, RGF_USER_JTAG_DEV_ID); 45 u8 chip_revision = (wil_r(wil, RGF_USER_REVISION_ID) & 46 RGF_USER_REVISION_ID_MASK); 47 48 bitmap_zero(wil->hw_capabilities, hw_capability_last); 49 bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX); 50 wil->wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_DEFAULT : 51 WIL_FW_NAME_DEFAULT; 52 wil->chip_revision = chip_revision; 53 54 switch (jtag_id) { 55 case JTAG_DEV_ID_SPARROW: 56 switch (chip_revision) { 57 case REVISION_ID_SPARROW_D0: 58 wil->hw_name = "Sparrow D0"; 59 wil->hw_version = HW_VER_SPARROW_D0; 60 wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_SPARROW_PLUS : 61 WIL_FW_NAME_SPARROW_PLUS; 62 63 if (wil_fw_verify_file_exists(wil, wil_fw_name)) 64 wil->wil_fw_name = wil_fw_name; 65 break; 66 case REVISION_ID_SPARROW_B0: 67 wil->hw_name = "Sparrow B0"; 68 wil->hw_version = HW_VER_SPARROW_B0; 69 break; 70 default: 71 wil->hw_name = "Unknown"; 72 wil->hw_version = HW_VER_UNKNOWN; 73 break; 74 } 75 break; 76 default: 77 wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n", 78 jtag_id, chip_revision); 79 wil->hw_name = "Unknown"; 80 wil->hw_version = HW_VER_UNKNOWN; 81 } 82 83 wil_info(wil, "Board hardware is %s\n", wil->hw_name); 84 85 /* extract FW capabilities from file without loading the FW */ 86 wil_request_firmware(wil, wil->wil_fw_name, false); 87 88 if (test_bit(WMI_FW_CAPABILITY_RSSI_REPORTING, wil->fw_capabilities)) 89 wil_to_wiphy(wil)->signal_type = CFG80211_SIGNAL_TYPE_MBM; 90 } 91 92 void wil_disable_irq(struct wil6210_priv *wil) 93 { 94 disable_irq(wil->pdev->irq); 95 } 96 97 void wil_enable_irq(struct wil6210_priv *wil) 98 { 99 enable_irq(wil->pdev->irq); 100 } 101 102 /* Bus ops */ 103 static int wil_if_pcie_enable(struct wil6210_priv *wil) 104 { 105 struct pci_dev *pdev = wil->pdev; 106 int rc; 107 /* on platforms with buggy ACPI, pdev->msi_enabled may be set to 108 * allow pci_enable_device to work. This indicates INTx was not routed 109 * and only MSI should be used 110 */ 111 int msi_only = pdev->msi_enabled; 112 bool _use_msi = use_msi; 113 bool wmi_only = test_bit(WMI_FW_CAPABILITY_WMI_ONLY, 114 wil->fw_capabilities); 115 116 wil_dbg_misc(wil, "if_pcie_enable, wmi_only %d\n", wmi_only); 117 118 pci_set_master(pdev); 119 120 wil_dbg_misc(wil, "Setup %s interrupt\n", use_msi ? "MSI" : "INTx"); 121 122 if (use_msi && pci_enable_msi(pdev)) { 123 wil_err(wil, "pci_enable_msi failed, use INTx\n"); 124 _use_msi = false; 125 } 126 127 if (!_use_msi && msi_only) { 128 wil_err(wil, "Interrupt pin not routed, unable to use INTx\n"); 129 rc = -ENODEV; 130 goto stop_master; 131 } 132 133 rc = wil6210_init_irq(wil, pdev->irq, _use_msi); 134 if (rc) 135 goto stop_master; 136 137 /* need reset here to obtain MAC or in case of WMI-only FW, full reset 138 * and fw loading takes place 139 */ 140 mutex_lock(&wil->mutex); 141 rc = wil_reset(wil, wmi_only); 142 mutex_unlock(&wil->mutex); 143 if (rc) 144 goto release_irq; 145 146 return 0; 147 148 release_irq: 149 wil6210_fini_irq(wil, pdev->irq); 150 /* safe to call if no MSI */ 151 pci_disable_msi(pdev); 152 stop_master: 153 pci_clear_master(pdev); 154 return rc; 155 } 156 157 static int wil_if_pcie_disable(struct wil6210_priv *wil) 158 { 159 struct pci_dev *pdev = wil->pdev; 160 161 wil_dbg_misc(wil, "if_pcie_disable\n"); 162 163 pci_clear_master(pdev); 164 /* disable and release IRQ */ 165 wil6210_fini_irq(wil, pdev->irq); 166 /* safe to call if no MSI */ 167 pci_disable_msi(pdev); 168 /* TODO: disable HW */ 169 170 return 0; 171 } 172 173 static int wil_platform_rop_ramdump(void *wil_handle, void *buf, uint32_t size) 174 { 175 struct wil6210_priv *wil = wil_handle; 176 177 if (!wil) 178 return -EINVAL; 179 180 return wil_fw_copy_crash_dump(wil, buf, size); 181 } 182 183 static int wil_platform_rop_fw_recovery(void *wil_handle) 184 { 185 struct wil6210_priv *wil = wil_handle; 186 187 if (!wil) 188 return -EINVAL; 189 190 wil_fw_error_recovery(wil); 191 192 return 0; 193 } 194 195 static void wil_platform_ops_uninit(struct wil6210_priv *wil) 196 { 197 if (wil->platform_ops.uninit) 198 wil->platform_ops.uninit(wil->platform_handle); 199 memset(&wil->platform_ops, 0, sizeof(wil->platform_ops)); 200 } 201 202 static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) 203 { 204 struct wil6210_priv *wil; 205 struct device *dev = &pdev->dev; 206 int rc; 207 const struct wil_platform_rops rops = { 208 .ramdump = wil_platform_rop_ramdump, 209 .fw_recovery = wil_platform_rop_fw_recovery, 210 }; 211 u32 bar_size = pci_resource_len(pdev, 0); 212 213 /* check HW */ 214 dev_info(&pdev->dev, WIL_NAME 215 " device found [%04x:%04x] (rev %x) bar size 0x%x\n", 216 (int)pdev->vendor, (int)pdev->device, (int)pdev->revision, 217 bar_size); 218 219 if ((bar_size < WIL6210_MIN_MEM_SIZE) || 220 (bar_size > WIL6210_MAX_MEM_SIZE)) { 221 dev_err(&pdev->dev, "Unexpected BAR0 size 0x%x\n", 222 bar_size); 223 return -ENODEV; 224 } 225 226 wil = wil_if_alloc(dev); 227 if (IS_ERR(wil)) { 228 rc = (int)PTR_ERR(wil); 229 dev_err(dev, "wil_if_alloc failed: %d\n", rc); 230 return rc; 231 } 232 233 wil->pdev = pdev; 234 pci_set_drvdata(pdev, wil); 235 wil->bar_size = bar_size; 236 /* rollback to if_free */ 237 238 wil->platform_handle = 239 wil_platform_init(&pdev->dev, &wil->platform_ops, &rops, wil); 240 if (!wil->platform_handle) { 241 rc = -ENODEV; 242 wil_err(wil, "wil_platform_init failed\n"); 243 goto if_free; 244 } 245 /* rollback to err_plat */ 246 247 /* device supports 48bit addresses */ 248 rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48)); 249 if (rc) { 250 dev_err(dev, "dma_set_mask_and_coherent(48) failed: %d\n", rc); 251 rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); 252 if (rc) { 253 dev_err(dev, 254 "dma_set_mask_and_coherent(32) failed: %d\n", 255 rc); 256 goto err_plat; 257 } 258 } else { 259 wil->use_extended_dma_addr = 1; 260 } 261 262 rc = pci_enable_device(pdev); 263 if (rc && pdev->msi_enabled == 0) { 264 wil_err(wil, 265 "pci_enable_device failed, retry with MSI only\n"); 266 /* Work around for platforms that can't allocate IRQ: 267 * retry with MSI only 268 */ 269 pdev->msi_enabled = 1; 270 rc = pci_enable_device(pdev); 271 } 272 if (rc) { 273 wil_err(wil, 274 "pci_enable_device failed, even with MSI only\n"); 275 goto err_plat; 276 } 277 /* rollback to err_disable_pdev */ 278 pci_set_power_state(pdev, PCI_D0); 279 280 rc = pci_request_region(pdev, 0, WIL_NAME); 281 if (rc) { 282 wil_err(wil, "pci_request_region failed\n"); 283 goto err_disable_pdev; 284 } 285 /* rollback to err_release_reg */ 286 287 wil->csr = pci_ioremap_bar(pdev, 0); 288 if (!wil->csr) { 289 wil_err(wil, "pci_ioremap_bar failed\n"); 290 rc = -ENODEV; 291 goto err_release_reg; 292 } 293 /* rollback to err_iounmap */ 294 wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr); 295 296 wil_set_capabilities(wil); 297 wil6210_clear_irq(wil); 298 299 wil->keep_radio_on_during_sleep = 300 wil->platform_ops.keep_radio_on_during_sleep && 301 wil->platform_ops.keep_radio_on_during_sleep( 302 wil->platform_handle) && 303 test_bit(WMI_FW_CAPABILITY_D3_SUSPEND, wil->fw_capabilities); 304 305 wil_info(wil, "keep_radio_on_during_sleep (%d)\n", 306 wil->keep_radio_on_during_sleep); 307 308 /* FW should raise IRQ when ready */ 309 rc = wil_if_pcie_enable(wil); 310 if (rc) { 311 wil_err(wil, "Enable device failed\n"); 312 goto err_iounmap; 313 } 314 /* rollback to bus_disable */ 315 316 rc = wil_if_add(wil); 317 if (rc) { 318 wil_err(wil, "wil_if_add failed: %d\n", rc); 319 goto bus_disable; 320 } 321 322 #ifdef CONFIG_PM 323 #ifdef CONFIG_PM_SLEEP 324 wil->pm_notify.notifier_call = wil6210_pm_notify; 325 rc = register_pm_notifier(&wil->pm_notify); 326 if (rc) 327 /* Do not fail the driver initialization, as suspend can 328 * be prevented in a later phase if needed 329 */ 330 wil_err(wil, "register_pm_notifier failed: %d\n", rc); 331 #endif /* CONFIG_PM_SLEEP */ 332 #endif /* CONFIG_PM */ 333 334 wil6210_debugfs_init(wil); 335 336 337 return 0; 338 339 bus_disable: 340 wil_if_pcie_disable(wil); 341 err_iounmap: 342 pci_iounmap(pdev, wil->csr); 343 err_release_reg: 344 pci_release_region(pdev, 0); 345 err_disable_pdev: 346 pci_disable_device(pdev); 347 err_plat: 348 wil_platform_ops_uninit(wil); 349 if_free: 350 wil_if_free(wil); 351 352 return rc; 353 } 354 355 static void wil_pcie_remove(struct pci_dev *pdev) 356 { 357 struct wil6210_priv *wil = pci_get_drvdata(pdev); 358 void __iomem *csr = wil->csr; 359 360 wil_dbg_misc(wil, "pcie_remove\n"); 361 362 #ifdef CONFIG_PM 363 #ifdef CONFIG_PM_SLEEP 364 unregister_pm_notifier(&wil->pm_notify); 365 #endif /* CONFIG_PM_SLEEP */ 366 #endif /* CONFIG_PM */ 367 368 wil6210_debugfs_remove(wil); 369 rtnl_lock(); 370 wil_p2p_wdev_free(wil); 371 rtnl_unlock(); 372 wil_if_remove(wil); 373 wil_if_pcie_disable(wil); 374 pci_iounmap(pdev, csr); 375 pci_release_region(pdev, 0); 376 pci_disable_device(pdev); 377 wil_platform_ops_uninit(wil); 378 wil_if_free(wil); 379 } 380 381 static const struct pci_device_id wil6210_pcie_ids[] = { 382 { PCI_DEVICE(0x1ae9, 0x0310) }, 383 { PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */ 384 { /* end: all zeroes */ }, 385 }; 386 MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids); 387 388 #ifdef CONFIG_PM 389 #ifdef CONFIG_PM_SLEEP 390 391 static int wil6210_suspend(struct device *dev, bool is_runtime) 392 { 393 int rc = 0; 394 struct pci_dev *pdev = to_pci_dev(dev); 395 struct wil6210_priv *wil = pci_get_drvdata(pdev); 396 397 wil_dbg_pm(wil, "suspend: %s\n", is_runtime ? "runtime" : "system"); 398 399 rc = wil_can_suspend(wil, is_runtime); 400 if (rc) 401 goto out; 402 403 rc = wil_suspend(wil, is_runtime); 404 if (!rc) { 405 wil->suspend_stats.successful_suspends++; 406 407 /* If platform device supports keep_radio_on_during_sleep 408 * it will control PCIe master 409 */ 410 if (!wil->keep_radio_on_during_sleep) 411 /* disable bus mastering */ 412 pci_clear_master(pdev); 413 } 414 out: 415 return rc; 416 } 417 418 static int wil6210_resume(struct device *dev, bool is_runtime) 419 { 420 int rc = 0; 421 struct pci_dev *pdev = to_pci_dev(dev); 422 struct wil6210_priv *wil = pci_get_drvdata(pdev); 423 424 wil_dbg_pm(wil, "resume: %s\n", is_runtime ? "runtime" : "system"); 425 426 /* If platform device supports keep_radio_on_during_sleep it will 427 * control PCIe master 428 */ 429 if (!wil->keep_radio_on_during_sleep) 430 /* allow master */ 431 pci_set_master(pdev); 432 rc = wil_resume(wil, is_runtime); 433 if (rc) { 434 wil_err(wil, "device failed to resume (%d)\n", rc); 435 wil->suspend_stats.failed_resumes++; 436 if (!wil->keep_radio_on_during_sleep) 437 pci_clear_master(pdev); 438 } else { 439 wil->suspend_stats.successful_resumes++; 440 } 441 442 return rc; 443 } 444 445 static int wil6210_pm_notify(struct notifier_block *notify_block, 446 unsigned long mode, void *unused) 447 { 448 struct wil6210_priv *wil = container_of( 449 notify_block, struct wil6210_priv, pm_notify); 450 int rc = 0; 451 enum wil_platform_event evt; 452 453 wil_dbg_pm(wil, "pm_notify: mode (%ld)\n", mode); 454 455 switch (mode) { 456 case PM_HIBERNATION_PREPARE: 457 case PM_SUSPEND_PREPARE: 458 case PM_RESTORE_PREPARE: 459 rc = wil_can_suspend(wil, false); 460 if (rc) 461 break; 462 evt = WIL_PLATFORM_EVT_PRE_SUSPEND; 463 if (wil->platform_ops.notify) 464 rc = wil->platform_ops.notify(wil->platform_handle, 465 evt); 466 break; 467 case PM_POST_SUSPEND: 468 case PM_POST_HIBERNATION: 469 case PM_POST_RESTORE: 470 evt = WIL_PLATFORM_EVT_POST_SUSPEND; 471 if (wil->platform_ops.notify) 472 rc = wil->platform_ops.notify(wil->platform_handle, 473 evt); 474 break; 475 default: 476 wil_dbg_pm(wil, "unhandled notify mode %ld\n", mode); 477 break; 478 } 479 480 wil_dbg_pm(wil, "notification mode %ld: rc (%d)\n", mode, rc); 481 return rc; 482 } 483 484 static int wil6210_pm_suspend(struct device *dev) 485 { 486 return wil6210_suspend(dev, false); 487 } 488 489 static int wil6210_pm_resume(struct device *dev) 490 { 491 return wil6210_resume(dev, false); 492 } 493 #endif /* CONFIG_PM_SLEEP */ 494 495 #endif /* CONFIG_PM */ 496 497 static const struct dev_pm_ops wil6210_pm_ops = { 498 SET_SYSTEM_SLEEP_PM_OPS(wil6210_pm_suspend, wil6210_pm_resume) 499 }; 500 501 static struct pci_driver wil6210_driver = { 502 .probe = wil_pcie_probe, 503 .remove = wil_pcie_remove, 504 .id_table = wil6210_pcie_ids, 505 .name = WIL_NAME, 506 .driver = { 507 .pm = &wil6210_pm_ops, 508 }, 509 }; 510 511 static int __init wil6210_driver_init(void) 512 { 513 int rc; 514 515 rc = wil_platform_modinit(); 516 if (rc) 517 return rc; 518 519 rc = pci_register_driver(&wil6210_driver); 520 if (rc) 521 wil_platform_modexit(); 522 return rc; 523 } 524 module_init(wil6210_driver_init); 525 526 static void __exit wil6210_driver_exit(void) 527 { 528 pci_unregister_driver(&wil6210_driver); 529 wil_platform_modexit(); 530 } 531 module_exit(wil6210_driver_exit); 532 533 MODULE_LICENSE("Dual BSD/GPL"); 534 MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>"); 535 MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card"); 536