1 /* 2 * Copyright (c) 2013 Eugene Krasnikov <k.eugene.e@gmail.com> 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION 13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15 */ 16 17 #ifndef _HAL_H_ 18 #define _HAL_H_ 19 20 /*--------------------------------------------------------------------------- 21 API VERSIONING INFORMATION 22 23 The RIVA API is versioned as MAJOR.MINOR.VERSION.REVISION 24 The MAJOR is incremented for major product/architecture changes 25 (and then MINOR/VERSION/REVISION are zeroed) 26 The MINOR is incremented for minor product/architecture changes 27 (and then VERSION/REVISION are zeroed) 28 The VERSION is incremented if a significant API change occurs 29 (and then REVISION is zeroed) 30 The REVISION is incremented if an insignificant API change occurs 31 or if a new API is added 32 All values are in the range 0..255 (ie they are 8-bit values) 33 ---------------------------------------------------------------------------*/ 34 #define WCN36XX_HAL_VER_MAJOR 1 35 #define WCN36XX_HAL_VER_MINOR 4 36 #define WCN36XX_HAL_VER_VERSION 1 37 #define WCN36XX_HAL_VER_REVISION 2 38 39 /* This is to force compiler to use the maximum of an int ( 4 bytes ) */ 40 #define WCN36XX_HAL_MAX_ENUM_SIZE 0x7FFFFFFF 41 #define WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE 0x7FFF 42 43 /* Max no. of transmit categories */ 44 #define STACFG_MAX_TC 8 45 46 /* The maximum value of access category */ 47 #define WCN36XX_HAL_MAX_AC 4 48 49 #define WCN36XX_HAL_IPV4_ADDR_LEN 4 50 51 #define WCN36XX_HAL_STA_INVALID_IDX 0xFF 52 #define WCN36XX_HAL_BSS_INVALID_IDX 0xFF 53 54 /* Default Beacon template size */ 55 #define BEACON_TEMPLATE_SIZE 0x180 56 57 /* Minimum PVM size that the FW expects. See comment in smd.c for details. */ 58 #define TIM_MIN_PVM_SIZE 6 59 60 /* Param Change Bitmap sent to HAL */ 61 #define PARAM_BCN_INTERVAL_CHANGED (1 << 0) 62 #define PARAM_SHORT_PREAMBLE_CHANGED (1 << 1) 63 #define PARAM_SHORT_SLOT_TIME_CHANGED (1 << 2) 64 #define PARAM_llACOEXIST_CHANGED (1 << 3) 65 #define PARAM_llBCOEXIST_CHANGED (1 << 4) 66 #define PARAM_llGCOEXIST_CHANGED (1 << 5) 67 #define PARAM_HT20MHZCOEXIST_CHANGED (1<<6) 68 #define PARAM_NON_GF_DEVICES_PRESENT_CHANGED (1<<7) 69 #define PARAM_RIFS_MODE_CHANGED (1<<8) 70 #define PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED (1<<9) 71 #define PARAM_OBSS_MODE_CHANGED (1<<10) 72 #define PARAM_BEACON_UPDATE_MASK \ 73 (PARAM_BCN_INTERVAL_CHANGED | \ 74 PARAM_SHORT_PREAMBLE_CHANGED | \ 75 PARAM_SHORT_SLOT_TIME_CHANGED | \ 76 PARAM_llACOEXIST_CHANGED | \ 77 PARAM_llBCOEXIST_CHANGED | \ 78 PARAM_llGCOEXIST_CHANGED | \ 79 PARAM_HT20MHZCOEXIST_CHANGED | \ 80 PARAM_NON_GF_DEVICES_PRESENT_CHANGED | \ 81 PARAM_RIFS_MODE_CHANGED | \ 82 PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED | \ 83 PARAM_OBSS_MODE_CHANGED) 84 85 /* dump command response Buffer size */ 86 #define DUMPCMD_RSP_BUFFER 100 87 88 /* version string max length (including NULL) */ 89 #define WCN36XX_HAL_VERSION_LENGTH 64 90 91 /* How many frames until we start a-mpdu TX session */ 92 #define WCN36XX_AMPDU_START_THRESH 20 93 94 #define WCN36XX_MAX_SCAN_SSIDS 9 95 #define WCN36XX_MAX_SCAN_IE_LEN 500 96 97 /* message types for messages exchanged between WDI and HAL */ 98 enum wcn36xx_hal_host_msg_type { 99 /* Init/De-Init */ 100 WCN36XX_HAL_START_REQ = 0, 101 WCN36XX_HAL_START_RSP = 1, 102 WCN36XX_HAL_STOP_REQ = 2, 103 WCN36XX_HAL_STOP_RSP = 3, 104 105 /* Scan */ 106 WCN36XX_HAL_INIT_SCAN_REQ = 4, 107 WCN36XX_HAL_INIT_SCAN_RSP = 5, 108 WCN36XX_HAL_START_SCAN_REQ = 6, 109 WCN36XX_HAL_START_SCAN_RSP = 7, 110 WCN36XX_HAL_END_SCAN_REQ = 8, 111 WCN36XX_HAL_END_SCAN_RSP = 9, 112 WCN36XX_HAL_FINISH_SCAN_REQ = 10, 113 WCN36XX_HAL_FINISH_SCAN_RSP = 11, 114 115 /* HW STA configuration/deconfiguration */ 116 WCN36XX_HAL_CONFIG_STA_REQ = 12, 117 WCN36XX_HAL_CONFIG_STA_RSP = 13, 118 WCN36XX_HAL_DELETE_STA_REQ = 14, 119 WCN36XX_HAL_DELETE_STA_RSP = 15, 120 WCN36XX_HAL_CONFIG_BSS_REQ = 16, 121 WCN36XX_HAL_CONFIG_BSS_RSP = 17, 122 WCN36XX_HAL_DELETE_BSS_REQ = 18, 123 WCN36XX_HAL_DELETE_BSS_RSP = 19, 124 125 /* Infra STA asscoiation */ 126 WCN36XX_HAL_JOIN_REQ = 20, 127 WCN36XX_HAL_JOIN_RSP = 21, 128 WCN36XX_HAL_POST_ASSOC_REQ = 22, 129 WCN36XX_HAL_POST_ASSOC_RSP = 23, 130 131 /* Security */ 132 WCN36XX_HAL_SET_BSSKEY_REQ = 24, 133 WCN36XX_HAL_SET_BSSKEY_RSP = 25, 134 WCN36XX_HAL_SET_STAKEY_REQ = 26, 135 WCN36XX_HAL_SET_STAKEY_RSP = 27, 136 WCN36XX_HAL_RMV_BSSKEY_REQ = 28, 137 WCN36XX_HAL_RMV_BSSKEY_RSP = 29, 138 WCN36XX_HAL_RMV_STAKEY_REQ = 30, 139 WCN36XX_HAL_RMV_STAKEY_RSP = 31, 140 141 /* Qos Related */ 142 WCN36XX_HAL_ADD_TS_REQ = 32, 143 WCN36XX_HAL_ADD_TS_RSP = 33, 144 WCN36XX_HAL_DEL_TS_REQ = 34, 145 WCN36XX_HAL_DEL_TS_RSP = 35, 146 WCN36XX_HAL_UPD_EDCA_PARAMS_REQ = 36, 147 WCN36XX_HAL_UPD_EDCA_PARAMS_RSP = 37, 148 WCN36XX_HAL_ADD_BA_REQ = 38, 149 WCN36XX_HAL_ADD_BA_RSP = 39, 150 WCN36XX_HAL_DEL_BA_REQ = 40, 151 WCN36XX_HAL_DEL_BA_RSP = 41, 152 153 WCN36XX_HAL_CH_SWITCH_REQ = 42, 154 WCN36XX_HAL_CH_SWITCH_RSP = 43, 155 WCN36XX_HAL_SET_LINK_ST_REQ = 44, 156 WCN36XX_HAL_SET_LINK_ST_RSP = 45, 157 WCN36XX_HAL_GET_STATS_REQ = 46, 158 WCN36XX_HAL_GET_STATS_RSP = 47, 159 WCN36XX_HAL_UPDATE_CFG_REQ = 48, 160 WCN36XX_HAL_UPDATE_CFG_RSP = 49, 161 162 WCN36XX_HAL_MISSED_BEACON_IND = 50, 163 WCN36XX_HAL_UNKNOWN_ADDR2_FRAME_RX_IND = 51, 164 WCN36XX_HAL_MIC_FAILURE_IND = 52, 165 WCN36XX_HAL_FATAL_ERROR_IND = 53, 166 WCN36XX_HAL_SET_KEYDONE_MSG = 54, 167 168 /* NV Interface */ 169 WCN36XX_HAL_DOWNLOAD_NV_REQ = 55, 170 WCN36XX_HAL_DOWNLOAD_NV_RSP = 56, 171 172 WCN36XX_HAL_ADD_BA_SESSION_REQ = 57, 173 WCN36XX_HAL_ADD_BA_SESSION_RSP = 58, 174 WCN36XX_HAL_TRIGGER_BA_REQ = 59, 175 WCN36XX_HAL_TRIGGER_BA_RSP = 60, 176 WCN36XX_HAL_UPDATE_BEACON_REQ = 61, 177 WCN36XX_HAL_UPDATE_BEACON_RSP = 62, 178 WCN36XX_HAL_SEND_BEACON_REQ = 63, 179 WCN36XX_HAL_SEND_BEACON_RSP = 64, 180 181 WCN36XX_HAL_SET_BCASTKEY_REQ = 65, 182 WCN36XX_HAL_SET_BCASTKEY_RSP = 66, 183 WCN36XX_HAL_DELETE_STA_CONTEXT_IND = 67, 184 WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_REQ = 68, 185 WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_RSP = 69, 186 187 /* PTT interface support */ 188 WCN36XX_HAL_PROCESS_PTT_REQ = 70, 189 WCN36XX_HAL_PROCESS_PTT_RSP = 71, 190 191 /* BTAMP related events */ 192 WCN36XX_HAL_SIGNAL_BTAMP_EVENT_REQ = 72, 193 WCN36XX_HAL_SIGNAL_BTAMP_EVENT_RSP = 73, 194 WCN36XX_HAL_TL_HAL_FLUSH_AC_REQ = 74, 195 WCN36XX_HAL_TL_HAL_FLUSH_AC_RSP = 75, 196 197 WCN36XX_HAL_ENTER_IMPS_REQ = 76, 198 WCN36XX_HAL_EXIT_IMPS_REQ = 77, 199 WCN36XX_HAL_ENTER_BMPS_REQ = 78, 200 WCN36XX_HAL_EXIT_BMPS_REQ = 79, 201 WCN36XX_HAL_ENTER_UAPSD_REQ = 80, 202 WCN36XX_HAL_EXIT_UAPSD_REQ = 81, 203 WCN36XX_HAL_UPDATE_UAPSD_PARAM_REQ = 82, 204 WCN36XX_HAL_CONFIGURE_RXP_FILTER_REQ = 83, 205 WCN36XX_HAL_ADD_BCN_FILTER_REQ = 84, 206 WCN36XX_HAL_REM_BCN_FILTER_REQ = 85, 207 WCN36XX_HAL_ADD_WOWL_BCAST_PTRN = 86, 208 WCN36XX_HAL_DEL_WOWL_BCAST_PTRN = 87, 209 WCN36XX_HAL_ENTER_WOWL_REQ = 88, 210 WCN36XX_HAL_EXIT_WOWL_REQ = 89, 211 WCN36XX_HAL_HOST_OFFLOAD_REQ = 90, 212 WCN36XX_HAL_SET_RSSI_THRESH_REQ = 91, 213 WCN36XX_HAL_GET_RSSI_REQ = 92, 214 WCN36XX_HAL_SET_UAPSD_AC_PARAMS_REQ = 93, 215 WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_REQ = 94, 216 217 WCN36XX_HAL_ENTER_IMPS_RSP = 95, 218 WCN36XX_HAL_EXIT_IMPS_RSP = 96, 219 WCN36XX_HAL_ENTER_BMPS_RSP = 97, 220 WCN36XX_HAL_EXIT_BMPS_RSP = 98, 221 WCN36XX_HAL_ENTER_UAPSD_RSP = 99, 222 WCN36XX_HAL_EXIT_UAPSD_RSP = 100, 223 WCN36XX_HAL_SET_UAPSD_AC_PARAMS_RSP = 101, 224 WCN36XX_HAL_UPDATE_UAPSD_PARAM_RSP = 102, 225 WCN36XX_HAL_CONFIGURE_RXP_FILTER_RSP = 103, 226 WCN36XX_HAL_ADD_BCN_FILTER_RSP = 104, 227 WCN36XX_HAL_REM_BCN_FILTER_RSP = 105, 228 WCN36XX_HAL_SET_RSSI_THRESH_RSP = 106, 229 WCN36XX_HAL_HOST_OFFLOAD_RSP = 107, 230 WCN36XX_HAL_ADD_WOWL_BCAST_PTRN_RSP = 108, 231 WCN36XX_HAL_DEL_WOWL_BCAST_PTRN_RSP = 109, 232 WCN36XX_HAL_ENTER_WOWL_RSP = 110, 233 WCN36XX_HAL_EXIT_WOWL_RSP = 111, 234 WCN36XX_HAL_RSSI_NOTIFICATION_IND = 112, 235 WCN36XX_HAL_GET_RSSI_RSP = 113, 236 WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_RSP = 114, 237 238 /* 11k related events */ 239 WCN36XX_HAL_SET_MAX_TX_POWER_REQ = 115, 240 WCN36XX_HAL_SET_MAX_TX_POWER_RSP = 116, 241 242 /* 11R related msgs */ 243 WCN36XX_HAL_AGGR_ADD_TS_REQ = 117, 244 WCN36XX_HAL_AGGR_ADD_TS_RSP = 118, 245 246 /* P2P WLAN_FEATURE_P2P */ 247 WCN36XX_HAL_SET_P2P_GONOA_REQ = 119, 248 WCN36XX_HAL_SET_P2P_GONOA_RSP = 120, 249 250 /* WLAN Dump commands */ 251 WCN36XX_HAL_DUMP_COMMAND_REQ = 121, 252 WCN36XX_HAL_DUMP_COMMAND_RSP = 122, 253 254 /* OEM_DATA FEATURE SUPPORT */ 255 WCN36XX_HAL_START_OEM_DATA_REQ = 123, 256 WCN36XX_HAL_START_OEM_DATA_RSP = 124, 257 258 /* ADD SELF STA REQ and RSP */ 259 WCN36XX_HAL_ADD_STA_SELF_REQ = 125, 260 WCN36XX_HAL_ADD_STA_SELF_RSP = 126, 261 262 /* DEL SELF STA SUPPORT */ 263 WCN36XX_HAL_DEL_STA_SELF_REQ = 127, 264 WCN36XX_HAL_DEL_STA_SELF_RSP = 128, 265 266 /* Coex Indication */ 267 WCN36XX_HAL_COEX_IND = 129, 268 269 /* Tx Complete Indication */ 270 WCN36XX_HAL_OTA_TX_COMPL_IND = 130, 271 272 /* Host Suspend/resume messages */ 273 WCN36XX_HAL_HOST_SUSPEND_IND = 131, 274 WCN36XX_HAL_HOST_RESUME_REQ = 132, 275 WCN36XX_HAL_HOST_RESUME_RSP = 133, 276 277 WCN36XX_HAL_SET_TX_POWER_REQ = 134, 278 WCN36XX_HAL_SET_TX_POWER_RSP = 135, 279 WCN36XX_HAL_GET_TX_POWER_REQ = 136, 280 WCN36XX_HAL_GET_TX_POWER_RSP = 137, 281 282 WCN36XX_HAL_P2P_NOA_ATTR_IND = 138, 283 284 WCN36XX_HAL_ENABLE_RADAR_DETECT_REQ = 139, 285 WCN36XX_HAL_ENABLE_RADAR_DETECT_RSP = 140, 286 WCN36XX_HAL_GET_TPC_REPORT_REQ = 141, 287 WCN36XX_HAL_GET_TPC_REPORT_RSP = 142, 288 WCN36XX_HAL_RADAR_DETECT_IND = 143, 289 WCN36XX_HAL_RADAR_DETECT_INTR_IND = 144, 290 WCN36XX_HAL_KEEP_ALIVE_REQ = 145, 291 WCN36XX_HAL_KEEP_ALIVE_RSP = 146, 292 293 /* PNO messages */ 294 WCN36XX_HAL_SET_PREF_NETWORK_REQ = 147, 295 WCN36XX_HAL_SET_PREF_NETWORK_RSP = 148, 296 WCN36XX_HAL_SET_RSSI_FILTER_REQ = 149, 297 WCN36XX_HAL_SET_RSSI_FILTER_RSP = 150, 298 WCN36XX_HAL_UPDATE_SCAN_PARAM_REQ = 151, 299 WCN36XX_HAL_UPDATE_SCAN_PARAM_RSP = 152, 300 WCN36XX_HAL_PREF_NETW_FOUND_IND = 153, 301 302 WCN36XX_HAL_SET_TX_PER_TRACKING_REQ = 154, 303 WCN36XX_HAL_SET_TX_PER_TRACKING_RSP = 155, 304 WCN36XX_HAL_TX_PER_HIT_IND = 156, 305 306 WCN36XX_HAL_8023_MULTICAST_LIST_REQ = 157, 307 WCN36XX_HAL_8023_MULTICAST_LIST_RSP = 158, 308 309 WCN36XX_HAL_SET_PACKET_FILTER_REQ = 159, 310 WCN36XX_HAL_SET_PACKET_FILTER_RSP = 160, 311 WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_REQ = 161, 312 WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_RSP = 162, 313 WCN36XX_HAL_CLEAR_PACKET_FILTER_REQ = 163, 314 WCN36XX_HAL_CLEAR_PACKET_FILTER_RSP = 164, 315 316 /* 317 * This is temp fix. Should be removed once Host and Riva code is 318 * in sync. 319 */ 320 WCN36XX_HAL_INIT_SCAN_CON_REQ = 165, 321 322 WCN36XX_HAL_SET_POWER_PARAMS_REQ = 166, 323 WCN36XX_HAL_SET_POWER_PARAMS_RSP = 167, 324 325 WCN36XX_HAL_TSM_STATS_REQ = 168, 326 WCN36XX_HAL_TSM_STATS_RSP = 169, 327 328 /* wake reason indication (WOW) */ 329 WCN36XX_HAL_WAKE_REASON_IND = 170, 330 331 /* GTK offload support */ 332 WCN36XX_HAL_GTK_OFFLOAD_REQ = 171, 333 WCN36XX_HAL_GTK_OFFLOAD_RSP = 172, 334 WCN36XX_HAL_GTK_OFFLOAD_GETINFO_REQ = 173, 335 WCN36XX_HAL_GTK_OFFLOAD_GETINFO_RSP = 174, 336 337 WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_REQ = 175, 338 WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_RSP = 176, 339 WCN36XX_HAL_EXCLUDE_UNENCRYPTED_IND = 177, 340 341 WCN36XX_HAL_SET_THERMAL_MITIGATION_REQ = 178, 342 WCN36XX_HAL_SET_THERMAL_MITIGATION_RSP = 179, 343 344 WCN36XX_HAL_UPDATE_VHT_OP_MODE_REQ = 182, 345 WCN36XX_HAL_UPDATE_VHT_OP_MODE_RSP = 183, 346 347 WCN36XX_HAL_P2P_NOA_START_IND = 184, 348 349 WCN36XX_HAL_GET_ROAM_RSSI_REQ = 185, 350 WCN36XX_HAL_GET_ROAM_RSSI_RSP = 186, 351 352 WCN36XX_HAL_CLASS_B_STATS_IND = 187, 353 WCN36XX_HAL_DEL_BA_IND = 188, 354 WCN36XX_HAL_DHCP_START_IND = 189, 355 WCN36XX_HAL_DHCP_STOP_IND = 190, 356 357 /* Scan Offload(hw) APIs */ 358 WCN36XX_HAL_START_SCAN_OFFLOAD_REQ = 204, 359 WCN36XX_HAL_START_SCAN_OFFLOAD_RSP = 205, 360 WCN36XX_HAL_STOP_SCAN_OFFLOAD_REQ = 206, 361 WCN36XX_HAL_STOP_SCAN_OFFLOAD_RSP = 207, 362 WCN36XX_HAL_UPDATE_CHANNEL_LIST_REQ = 208, 363 WCN36XX_HAL_UPDATE_CHANNEL_LIST_RSP = 209, 364 WCN36XX_HAL_SCAN_OFFLOAD_IND = 210, 365 366 WCN36XX_HAL_AVOID_FREQ_RANGE_IND = 233, 367 368 WCN36XX_HAL_PRINT_REG_INFO_IND = 259, 369 370 WCN36XX_HAL_MSG_MAX = WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE 371 }; 372 373 /* Enumeration for Version */ 374 enum wcn36xx_hal_host_msg_version { 375 WCN36XX_HAL_MSG_VERSION0 = 0, 376 WCN36XX_HAL_MSG_VERSION1 = 1, 377 /* define as 2 bytes data */ 378 WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION = 0x7FFF, 379 WCN36XX_HAL_MSG_VERSION_MAX_FIELD = WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION 380 }; 381 382 enum driver_type { 383 DRIVER_TYPE_PRODUCTION = 0, 384 DRIVER_TYPE_MFG = 1, 385 DRIVER_TYPE_DVT = 2, 386 DRIVER_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 387 }; 388 389 enum wcn36xx_hal_stop_type { 390 HAL_STOP_TYPE_SYS_RESET, 391 HAL_STOP_TYPE_SYS_DEEP_SLEEP, 392 HAL_STOP_TYPE_RF_KILL, 393 HAL_STOP_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 394 }; 395 396 enum wcn36xx_hal_sys_mode { 397 HAL_SYS_MODE_NORMAL, 398 HAL_SYS_MODE_LEARN, 399 HAL_SYS_MODE_SCAN, 400 HAL_SYS_MODE_PROMISC, 401 HAL_SYS_MODE_SUSPEND_LINK, 402 HAL_SYS_MODE_ROAM_SCAN, 403 HAL_SYS_MODE_ROAM_SUSPEND_LINK, 404 HAL_SYS_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 405 }; 406 407 enum phy_chan_bond_state { 408 /* 20MHz IF bandwidth centered on IF carrier */ 409 PHY_SINGLE_CHANNEL_CENTERED = 0, 410 411 /* 40MHz IF bandwidth with lower 20MHz supporting the primary channel */ 412 PHY_DOUBLE_CHANNEL_LOW_PRIMARY = 1, 413 414 /* 40MHz IF bandwidth centered on IF carrier */ 415 PHY_DOUBLE_CHANNEL_CENTERED = 2, 416 417 /* 40MHz IF bandwidth with higher 20MHz supporting the primary ch */ 418 PHY_DOUBLE_CHANNEL_HIGH_PRIMARY = 3, 419 420 /* 20/40MHZ offset LOW 40/80MHZ offset CENTERED */ 421 PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_CENTERED = 4, 422 423 /* 20/40MHZ offset CENTERED 40/80MHZ offset CENTERED */ 424 PHY_QUADRUPLE_CHANNEL_20MHZ_CENTERED_40MHZ_CENTERED = 5, 425 426 /* 20/40MHZ offset HIGH 40/80MHZ offset CENTERED */ 427 PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_CENTERED = 6, 428 429 /* 20/40MHZ offset LOW 40/80MHZ offset LOW */ 430 PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW = 7, 431 432 /* 20/40MHZ offset HIGH 40/80MHZ offset LOW */ 433 PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW = 8, 434 435 /* 20/40MHZ offset LOW 40/80MHZ offset HIGH */ 436 PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH = 9, 437 438 /* 20/40MHZ offset-HIGH 40/80MHZ offset HIGH */ 439 PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH = 10, 440 441 PHY_CHANNEL_BONDING_STATE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 442 }; 443 444 /* Spatial Multiplexing(SM) Power Save mode */ 445 enum wcn36xx_hal_ht_mimo_state { 446 /* Static SM Power Save mode */ 447 WCN36XX_HAL_HT_MIMO_PS_STATIC = 0, 448 449 /* Dynamic SM Power Save mode */ 450 WCN36XX_HAL_HT_MIMO_PS_DYNAMIC = 1, 451 452 /* reserved */ 453 WCN36XX_HAL_HT_MIMO_PS_NA = 2, 454 455 /* SM Power Save disabled */ 456 WCN36XX_HAL_HT_MIMO_PS_NO_LIMIT = 3, 457 458 WCN36XX_HAL_HT_MIMO_PS_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 459 }; 460 461 /* each station added has a rate mode which specifies the sta attributes */ 462 enum sta_rate_mode { 463 STA_TAURUS = 0, 464 STA_TITAN, 465 STA_POLARIS, 466 STA_11b, 467 STA_11bg, 468 STA_11a, 469 STA_11n, 470 STA_11ac, 471 STA_INVALID_RATE_MODE = WCN36XX_HAL_MAX_ENUM_SIZE 472 }; 473 474 /* 1,2,5.5,11 */ 475 #define WCN36XX_HAL_NUM_DSSS_RATES 4 476 477 /* 6,9,12,18,24,36,48,54 */ 478 #define WCN36XX_HAL_NUM_OFDM_RATES 8 479 480 /* 72,96,108 */ 481 #define WCN36XX_HAL_NUM_POLARIS_RATES 3 482 483 #define WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET 16 484 485 enum wcn36xx_hal_bss_type { 486 WCN36XX_HAL_INFRASTRUCTURE_MODE, 487 488 /* Added for softAP support */ 489 WCN36XX_HAL_INFRA_AP_MODE, 490 491 WCN36XX_HAL_IBSS_MODE, 492 493 /* Added for BT-AMP support */ 494 WCN36XX_HAL_BTAMP_STA_MODE, 495 496 /* Added for BT-AMP support */ 497 WCN36XX_HAL_BTAMP_AP_MODE, 498 499 WCN36XX_HAL_AUTO_MODE, 500 501 WCN36XX_HAL_DONOT_USE_BSS_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE 502 }; 503 504 enum wcn36xx_hal_nw_type { 505 WCN36XX_HAL_11A_NW_TYPE, 506 WCN36XX_HAL_11B_NW_TYPE, 507 WCN36XX_HAL_11G_NW_TYPE, 508 WCN36XX_HAL_11N_NW_TYPE, 509 WCN36XX_HAL_DONOT_USE_NW_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE 510 }; 511 512 #define WCN36XX_HAL_MAC_RATESET_EID_MAX 12 513 514 enum wcn36xx_hal_ht_operating_mode { 515 /* No Protection */ 516 WCN36XX_HAL_HT_OP_MODE_PURE, 517 518 /* Overlap Legacy device present, protection is optional */ 519 WCN36XX_HAL_HT_OP_MODE_OVERLAP_LEGACY, 520 521 /* No legacy device, but 20 MHz HT present */ 522 WCN36XX_HAL_HT_OP_MODE_NO_LEGACY_20MHZ_HT, 523 524 /* Protection is required */ 525 WCN36XX_HAL_HT_OP_MODE_MIXED, 526 527 WCN36XX_HAL_HT_OP_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 528 }; 529 530 /* Encryption type enum used with peer */ 531 enum ani_ed_type { 532 WCN36XX_HAL_ED_NONE, 533 WCN36XX_HAL_ED_WEP40, 534 WCN36XX_HAL_ED_WEP104, 535 WCN36XX_HAL_ED_TKIP, 536 WCN36XX_HAL_ED_CCMP, 537 WCN36XX_HAL_ED_WPI, 538 WCN36XX_HAL_ED_AES_128_CMAC, 539 WCN36XX_HAL_ED_NOT_IMPLEMENTED = WCN36XX_HAL_MAX_ENUM_SIZE 540 }; 541 542 #define WLAN_MAX_KEY_RSC_LEN 16 543 #define WLAN_WAPI_KEY_RSC_LEN 16 544 545 /* MAX key length when ULA is used */ 546 #define WCN36XX_HAL_MAC_MAX_KEY_LENGTH 32 547 #define WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS 4 548 549 /* 550 * Enum to specify whether key is used for TX only, RX only or both. 551 */ 552 enum ani_key_direction { 553 WCN36XX_HAL_TX_ONLY, 554 WCN36XX_HAL_RX_ONLY, 555 WCN36XX_HAL_TX_RX, 556 WCN36XX_HAL_TX_DEFAULT, 557 WCN36XX_HAL_DONOT_USE_KEY_DIRECTION = WCN36XX_HAL_MAX_ENUM_SIZE 558 }; 559 560 enum ani_wep_type { 561 WCN36XX_HAL_WEP_STATIC, 562 WCN36XX_HAL_WEP_DYNAMIC, 563 WCN36XX_HAL_WEP_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 564 }; 565 566 enum wcn36xx_hal_link_state { 567 568 WCN36XX_HAL_LINK_IDLE_STATE = 0, 569 WCN36XX_HAL_LINK_PREASSOC_STATE = 1, 570 WCN36XX_HAL_LINK_POSTASSOC_STATE = 2, 571 WCN36XX_HAL_LINK_AP_STATE = 3, 572 WCN36XX_HAL_LINK_IBSS_STATE = 4, 573 574 /* BT-AMP Case */ 575 WCN36XX_HAL_LINK_BTAMP_PREASSOC_STATE = 5, 576 WCN36XX_HAL_LINK_BTAMP_POSTASSOC_STATE = 6, 577 WCN36XX_HAL_LINK_BTAMP_AP_STATE = 7, 578 WCN36XX_HAL_LINK_BTAMP_STA_STATE = 8, 579 580 /* Reserved for HAL Internal Use */ 581 WCN36XX_HAL_LINK_LEARN_STATE = 9, 582 WCN36XX_HAL_LINK_SCAN_STATE = 10, 583 WCN36XX_HAL_LINK_FINISH_SCAN_STATE = 11, 584 WCN36XX_HAL_LINK_INIT_CAL_STATE = 12, 585 WCN36XX_HAL_LINK_FINISH_CAL_STATE = 13, 586 WCN36XX_HAL_LINK_LISTEN_STATE = 14, 587 588 WCN36XX_HAL_LINK_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 589 }; 590 591 enum wcn36xx_hal_stats_mask { 592 HAL_SUMMARY_STATS_INFO = 0x00000001, 593 HAL_GLOBAL_CLASS_A_STATS_INFO = 0x00000002, 594 HAL_GLOBAL_CLASS_B_STATS_INFO = 0x00000004, 595 HAL_GLOBAL_CLASS_C_STATS_INFO = 0x00000008, 596 HAL_GLOBAL_CLASS_D_STATS_INFO = 0x00000010, 597 HAL_PER_STA_STATS_INFO = 0x00000020 598 }; 599 600 /* BT-AMP events type */ 601 enum bt_amp_event_type { 602 BTAMP_EVENT_CONNECTION_START, 603 BTAMP_EVENT_CONNECTION_STOP, 604 BTAMP_EVENT_CONNECTION_TERMINATED, 605 606 /* This and beyond are invalid values */ 607 BTAMP_EVENT_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, 608 }; 609 610 /* PE Statistics */ 611 enum pe_stats_mask { 612 PE_SUMMARY_STATS_INFO = 0x00000001, 613 PE_GLOBAL_CLASS_A_STATS_INFO = 0x00000002, 614 PE_GLOBAL_CLASS_B_STATS_INFO = 0x00000004, 615 PE_GLOBAL_CLASS_C_STATS_INFO = 0x00000008, 616 PE_GLOBAL_CLASS_D_STATS_INFO = 0x00000010, 617 PE_PER_STA_STATS_INFO = 0x00000020, 618 619 /* This and beyond are invalid values */ 620 PE_STATS_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 621 }; 622 623 /* 624 * Configuration Parameter IDs 625 */ 626 #define WCN36XX_HAL_CFG_STA_ID 0 627 #define WCN36XX_HAL_CFG_CURRENT_TX_ANTENNA 1 628 #define WCN36XX_HAL_CFG_CURRENT_RX_ANTENNA 2 629 #define WCN36XX_HAL_CFG_LOW_GAIN_OVERRIDE 3 630 #define WCN36XX_HAL_CFG_POWER_STATE_PER_CHAIN 4 631 #define WCN36XX_HAL_CFG_CAL_PERIOD 5 632 #define WCN36XX_HAL_CFG_CAL_CONTROL 6 633 #define WCN36XX_HAL_CFG_PROXIMITY 7 634 #define WCN36XX_HAL_CFG_NETWORK_DENSITY 8 635 #define WCN36XX_HAL_CFG_MAX_MEDIUM_TIME 9 636 #define WCN36XX_HAL_CFG_MAX_MPDUS_IN_AMPDU 10 637 #define WCN36XX_HAL_CFG_RTS_THRESHOLD 11 638 #define WCN36XX_HAL_CFG_SHORT_RETRY_LIMIT 12 639 #define WCN36XX_HAL_CFG_LONG_RETRY_LIMIT 13 640 #define WCN36XX_HAL_CFG_FRAGMENTATION_THRESHOLD 14 641 #define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ZERO 15 642 #define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ONE 16 643 #define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_TWO 17 644 #define WCN36XX_HAL_CFG_FIXED_RATE 18 645 #define WCN36XX_HAL_CFG_RETRYRATE_POLICY 19 646 #define WCN36XX_HAL_CFG_RETRYRATE_SECONDARY 20 647 #define WCN36XX_HAL_CFG_RETRYRATE_TERTIARY 21 648 #define WCN36XX_HAL_CFG_FORCE_POLICY_PROTECTION 22 649 #define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_24GHZ 23 650 #define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_5GHZ 24 651 #define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_24GHZ 25 652 #define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_5GHZ 26 653 #define WCN36XX_HAL_CFG_MAX_BA_SESSIONS 27 654 #define WCN36XX_HAL_CFG_PS_DATA_INACTIVITY_TIMEOUT 28 655 #define WCN36XX_HAL_CFG_PS_ENABLE_BCN_FILTER 29 656 #define WCN36XX_HAL_CFG_PS_ENABLE_RSSI_MONITOR 30 657 #define WCN36XX_HAL_CFG_NUM_BEACON_PER_RSSI_AVERAGE 31 658 #define WCN36XX_HAL_CFG_STATS_PERIOD 32 659 #define WCN36XX_HAL_CFG_CFP_MAX_DURATION 33 660 #define WCN36XX_HAL_CFG_FRAME_TRANS_ENABLED 34 661 #define WCN36XX_HAL_CFG_DTIM_PERIOD 35 662 #define WCN36XX_HAL_CFG_EDCA_WMM_ACBK 36 663 #define WCN36XX_HAL_CFG_EDCA_WMM_ACBE 37 664 #define WCN36XX_HAL_CFG_EDCA_WMM_ACVO 38 665 #define WCN36XX_HAL_CFG_EDCA_WMM_ACVI 39 666 #define WCN36XX_HAL_CFG_BA_THRESHOLD_HIGH 40 667 #define WCN36XX_HAL_CFG_MAX_BA_BUFFERS 41 668 #define WCN36XX_HAL_CFG_RPE_POLLING_THRESHOLD 42 669 #define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC0_REG 43 670 #define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC1_REG 44 671 #define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC2_REG 45 672 #define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC3_REG 46 673 #define WCN36XX_HAL_CFG_NO_OF_ONCHIP_REORDER_SESSIONS 47 674 #define WCN36XX_HAL_CFG_PS_LISTEN_INTERVAL 48 675 #define WCN36XX_HAL_CFG_PS_HEART_BEAT_THRESHOLD 49 676 #define WCN36XX_HAL_CFG_PS_NTH_BEACON_FILTER 50 677 #define WCN36XX_HAL_CFG_PS_MAX_PS_POLL 51 678 #define WCN36XX_HAL_CFG_PS_MIN_RSSI_THRESHOLD 52 679 #define WCN36XX_HAL_CFG_PS_RSSI_FILTER_PERIOD 53 680 #define WCN36XX_HAL_CFG_PS_BROADCAST_FRAME_FILTER_ENABLE 54 681 #define WCN36XX_HAL_CFG_PS_IGNORE_DTIM 55 682 #define WCN36XX_HAL_CFG_PS_ENABLE_BCN_EARLY_TERM 56 683 #define WCN36XX_HAL_CFG_DYNAMIC_PS_POLL_VALUE 57 684 #define WCN36XX_HAL_CFG_PS_NULLDATA_AP_RESP_TIMEOUT 58 685 #define WCN36XX_HAL_CFG_TELE_BCN_WAKEUP_EN 59 686 #define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI 60 687 #define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI_IDLE_BCNS 61 688 #define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI 62 689 #define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI_IDLE_BCNS 63 690 #define WCN36XX_HAL_CFG_TX_PWR_CTRL_ENABLE 64 691 #define WCN36XX_HAL_CFG_VALID_RADAR_CHANNEL_LIST 65 692 #define WCN36XX_HAL_CFG_TX_POWER_24_20 66 693 #define WCN36XX_HAL_CFG_TX_POWER_24_40 67 694 #define WCN36XX_HAL_CFG_TX_POWER_50_20 68 695 #define WCN36XX_HAL_CFG_TX_POWER_50_40 69 696 #define WCN36XX_HAL_CFG_MCAST_BCAST_FILTER_SETTING 70 697 #define WCN36XX_HAL_CFG_BCN_EARLY_TERM_WAKEUP_INTERVAL 71 698 #define WCN36XX_HAL_CFG_MAX_TX_POWER_2_4 72 699 #define WCN36XX_HAL_CFG_MAX_TX_POWER_5 73 700 #define WCN36XX_HAL_CFG_INFRA_STA_KEEP_ALIVE_PERIOD 74 701 #define WCN36XX_HAL_CFG_ENABLE_CLOSE_LOOP 75 702 #define WCN36XX_HAL_CFG_BTC_EXECUTION_MODE 76 703 #define WCN36XX_HAL_CFG_BTC_DHCP_BT_SLOTS_TO_BLOCK 77 704 #define WCN36XX_HAL_CFG_BTC_A2DP_DHCP_BT_SUB_INTERVALS 78 705 #define WCN36XX_HAL_CFG_PS_TX_INACTIVITY_TIMEOUT 79 706 #define WCN36XX_HAL_CFG_WCNSS_API_VERSION 80 707 #define WCN36XX_HAL_CFG_AP_KEEPALIVE_TIMEOUT 81 708 #define WCN36XX_HAL_CFG_GO_KEEPALIVE_TIMEOUT 82 709 #define WCN36XX_HAL_CFG_ENABLE_MC_ADDR_LIST 83 710 #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_BT 84 711 #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_BT 85 712 #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_BT 86 713 #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_BT 87 714 #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_WLAN 88 715 #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_WLAN 89 716 #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_WLAN 90 717 #define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_WLAN 91 718 #define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_BT 92 719 #define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_WLAN 93 720 #define WCN36XX_HAL_CFG_BTC_MAX_SCO_BLOCK_PERC 94 721 #define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_A2DP 95 722 #define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_SCO 96 723 #define WCN36XX_HAL_CFG_ENABLE_UNICAST_FILTER 97 724 #define WCN36XX_HAL_CFG_MAX_ASSOC_LIMIT 98 725 #define WCN36XX_HAL_CFG_ENABLE_LPWR_IMG_TRANSITION 99 726 #define WCN36XX_HAL_CFG_ENABLE_MCC_ADAPTIVE_SCHEDULER 100 727 #define WCN36XX_HAL_CFG_ENABLE_DETECT_PS_SUPPORT 101 728 #define WCN36XX_HAL_CFG_AP_LINK_MONITOR_TIMEOUT 102 729 #define WCN36XX_HAL_CFG_BTC_DWELL_TIME_MULTIPLIER 103 730 #define WCN36XX_HAL_CFG_ENABLE_TDLS_OXYGEN_MODE 104 731 #define WCN36XX_HAL_CFG_ENABLE_NAT_KEEP_ALIVE_FILTER 105 732 #define WCN36XX_HAL_CFG_ENABLE_SAP_OBSS_PROT 106 733 #define WCN36XX_HAL_CFG_PSPOLL_DATA_RECEP_TIMEOUT 107 734 #define WCN36XX_HAL_CFG_TDLS_PUAPSD_BUFFER_STA_CAPABLE 108 735 #define WCN36XX_HAL_CFG_TDLS_PUAPSD_MASK 109 736 #define WCN36XX_HAL_CFG_TDLS_PUAPSD_INACTIVITY_TIME 110 737 #define WCN36XX_HAL_CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD 111 738 #define WCN36XX_HAL_CFG_ANTENNA_DIVERSITY 112 739 #define WCN36XX_HAL_CFG_ATH_DISABLE 113 740 #define WCN36XX_HAL_CFG_FLEXCONNECT_POWER_FACTOR 114 741 #define WCN36XX_HAL_CFG_ENABLE_ADAPTIVE_RX_DRAIN 115 742 #define WCN36XX_HAL_CFG_TDLS_OFF_CHANNEL_CAPABLE 116 743 #define WCN36XX_HAL_CFG_MWS_COEX_V1_WAN_FREQ 117 744 #define WCN36XX_HAL_CFG_MWS_COEX_V1_WLAN_FREQ 118 745 #define WCN36XX_HAL_CFG_MWS_COEX_V1_CONFIG 119 746 #define WCN36XX_HAL_CFG_MWS_COEX_V1_CONFIG2 120 747 #define WCN36XX_HAL_CFG_MWS_COEX_V2_WAN_FREQ 121 748 #define WCN36XX_HAL_CFG_MWS_COEX_V2_WLAN_FREQ 122 749 #define WCN36XX_HAL_CFG_MWS_COEX_V2_CONFIG 123 750 #define WCN36XX_HAL_CFG_MWS_COEX_V2_CONFIG2 124 751 #define WCN36XX_HAL_CFG_MWS_COEX_V3_WAN_FREQ 125 752 #define WCN36XX_HAL_CFG_MWS_COEX_V3_WLAN_FREQ 126 753 #define WCN36XX_HAL_CFG_MWS_COEX_V3_CONFIG 127 754 #define WCN36XX_HAL_CFG_MWS_COEX_V3_CONFIG2 128 755 #define WCN36XX_HAL_CFG_MWS_COEX_V4_WAN_FREQ 129 756 #define WCN36XX_HAL_CFG_MWS_COEX_V4_WLAN_FREQ 130 757 #define WCN36XX_HAL_CFG_MWS_COEX_V4_CONFIG 131 758 #define WCN36XX_HAL_CFG_MWS_COEX_V4_CONFIG2 132 759 #define WCN36XX_HAL_CFG_MWS_COEX_V5_WAN_FREQ 133 760 #define WCN36XX_HAL_CFG_MWS_COEX_V5_WLAN_FREQ 134 761 #define WCN36XX_HAL_CFG_MWS_COEX_V5_CONFIG 135 762 #define WCN36XX_HAL_CFG_MWS_COEX_V5_CONFIG2 136 763 #define WCN36XX_HAL_CFG_MWS_COEX_V6_WAN_FREQ 137 764 #define WCN36XX_HAL_CFG_MWS_COEX_V6_WLAN_FREQ 138 765 #define WCN36XX_HAL_CFG_MWS_COEX_V6_CONFIG 139 766 #define WCN36XX_HAL_CFG_MWS_COEX_V6_CONFIG2 140 767 #define WCN36XX_HAL_CFG_MWS_COEX_V7_WAN_FREQ 141 768 #define WCN36XX_HAL_CFG_MWS_COEX_V7_WLAN_FREQ 142 769 #define WCN36XX_HAL_CFG_MWS_COEX_V7_CONFIG 143 770 #define WCN36XX_HAL_CFG_MWS_COEX_V7_CONFIG2 144 771 #define WCN36XX_HAL_CFG_MWS_COEX_V8_WAN_FREQ 145 772 #define WCN36XX_HAL_CFG_MWS_COEX_V8_WLAN_FREQ 146 773 #define WCN36XX_HAL_CFG_MWS_COEX_V8_CONFIG 147 774 #define WCN36XX_HAL_CFG_MWS_COEX_V8_CONFIG2 148 775 #define WCN36XX_HAL_CFG_MWS_COEX_V9_WAN_FREQ 149 776 #define WCN36XX_HAL_CFG_MWS_COEX_V9_WLAN_FREQ 150 777 #define WCN36XX_HAL_CFG_MWS_COEX_V9_CONFIG 151 778 #define WCN36XX_HAL_CFG_MWS_COEX_V9_CONFIG2 152 779 #define WCN36XX_HAL_CFG_MWS_COEX_V10_WAN_FREQ 153 780 #define WCN36XX_HAL_CFG_MWS_COEX_V10_WLAN_FREQ 154 781 #define WCN36XX_HAL_CFG_MWS_COEX_V10_CONFIG 155 782 #define WCN36XX_HAL_CFG_MWS_COEX_V10_CONFIG2 156 783 #define WCN36XX_HAL_CFG_MWS_COEX_MODEM_BACKOFF 157 784 #define WCN36XX_HAL_CFG_MWS_COEX_CONFIG1 158 785 #define WCN36XX_HAL_CFG_MWS_COEX_CONFIG2 159 786 #define WCN36XX_HAL_CFG_MWS_COEX_CONFIG3 160 787 #define WCN36XX_HAL_CFG_MWS_COEX_CONFIG4 161 788 #define WCN36XX_HAL_CFG_MWS_COEX_CONFIG5 162 789 #define WCN36XX_HAL_CFG_MWS_COEX_CONFIG6 163 790 #define WCN36XX_HAL_CFG_SAR_POWER_BACKOFF 164 791 #define WCN36XX_HAL_CFG_GO_LINK_MONITOR_TIMEOUT 165 792 #define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_ACTIVE_WLAN_LEN 166 793 #define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_ACTIVE_BT_LEN 167 794 #define WCN36XX_HAL_CFG_BTC_SAP_STATIC_OPP_ACTIVE_WLAN_LEN 168 795 #define WCN36XX_HAL_CFG_BTC_SAP_STATIC_OPP_ACTIVE_BT_LEN 169 796 #define WCN36XX_HAL_CFG_RMC_FIXED_RATE 170 797 #define WCN36XX_HAL_CFG_ASD_PROBE_INTERVAL 171 798 #define WCN36XX_HAL_CFG_ASD_TRIGGER_THRESHOLD 172 799 #define WCN36XX_HAL_CFG_ASD_RTT_RSSI_HYST_THRESHOLD 173 800 #define WCN36XX_HAL_CFG_BTC_CTS2S_ON_STA_DURING_SCO 174 801 #define WCN36XX_HAL_CFG_SHORT_PREAMBLE 175 802 #define WCN36XX_HAL_CFG_SHORT_SLOT_TIME 176 803 #define WCN36XX_HAL_CFG_DELAYED_BA 177 804 #define WCN36XX_HAL_CFG_IMMEDIATE_BA 178 805 #define WCN36XX_HAL_CFG_DOT11_MODE 179 806 #define WCN36XX_HAL_CFG_HT_CAPS 180 807 #define WCN36XX_HAL_CFG_AMPDU_PARAMS 181 808 #define WCN36XX_HAL_CFG_TX_BF_INFO 182 809 #define WCN36XX_HAL_CFG_ASC_CAP_INFO 183 810 #define WCN36XX_HAL_CFG_EXT_HT_CAPS 184 811 #define WCN36XX_HAL_CFG_QOS_ENABLED 185 812 #define WCN36XX_HAL_CFG_WME_ENABLED 186 813 #define WCN36XX_HAL_CFG_WSM_ENABLED 187 814 #define WCN36XX_HAL_CFG_WMM_ENABLED 188 815 #define WCN36XX_HAL_CFG_UAPSD_PER_AC_BITMASK 189 816 #define WCN36XX_HAL_CFG_MCS_RATES 190 817 #define WCN36XX_HAL_CFG_VHT_CAPS 191 818 #define WCN36XX_HAL_CFG_VHT_RX_SUPP_MCS 192 819 #define WCN36XX_HAL_CFG_VHT_TX_SUPP_MCS 193 820 #define WCN36XX_HAL_CFG_RA_FILTER_ENABLE 194 821 #define WCN36XX_HAL_CFG_RA_RATE_LIMIT_INTERVAL 195 822 #define WCN36XX_HAL_CFG_BTC_FATAL_HID_NSNIFF_BLK 196 823 #define WCN36XX_HAL_CFG_BTC_CRITICAL_HID_NSNIFF_BLK 197 824 #define WCN36XX_HAL_CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD 198 825 #define WCN36XX_HAL_CFG_BTC_DYN_OPP_TX_QUEUE_THOLD 199 826 #define WCN36XX_HAL_CFG_LINK_FAIL_TIMEOUT 200 827 #define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_SP 201 828 #define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_RX_CNT 202 829 #define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_TX_CNT 203 830 #define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW 204 831 #define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW 205 832 #define WCN36XX_HAL_CFG_MAX_PSPOLL_IN_WMM_UAPSD_PS_MODE 206 833 #define WCN36XX_HAL_CFG_MAX_UAPSD_INACTIVITY_INTERVALS 207 834 #define WCN36XX_HAL_CFG_ENABLE_DYNAMIC_WMMPS 208 835 #define WCN36XX_HAL_CFG_BURST_MODE_BE_TXOP_VALUE 209 836 #define WCN36XX_HAL_CFG_ENABLE_DYNAMIC_RA_START_RATE 210 837 #define WCN36XX_HAL_CFG_BTC_FAST_WLAN_CONN_PREF 211 838 #define WCN36XX_HAL_CFG_ENABLE_RTSCTS_HTVHT 212 839 #define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN 213 840 #define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN 214 841 #define WCN36XX_HAL_CFG_LINK_FAIL_TX_CNT 215 842 #define WCN36XX_HAL_CFG_TOGGLE_ARP_BDRATES 216 843 #define WCN36XX_HAL_CFG_OPTIMIZE_CA_EVENT 217 844 #define WCN36XX_HAL_CFG_EXT_SCAN_CONC_MODE 218 845 #define WCN36XX_HAL_CFG_BAR_WAKEUP_HOST_DISABLE 219 846 #define WCN36XX_HAL_CFG_SAR_BOFFSET_CORRECTION_ENABLE 220 847 #define WCN36XX_HAL_CFG_UNITS_OF_BCN_WAIT_TIME 221 848 #define WCN36XX_HAL_CFG_CONS_BCNMISS_COUNT 222 849 #define WCN36XX_HAL_CFG_BTC_DISABLE_WLAN_LINK_CRITICAL 223 850 #define WCN36XX_HAL_CFG_DISABLE_SCAN_DURING_SCO 224 851 #define WCN36XX_HAL_CFG_TRIGGER_NULLFRAME_BEFORE_HB 225 852 #define WCN36XX_HAL_CFG_ENABLE_POWERSAVE_OFFLOAD 226 853 #define WCN36XX_HAL_CFG_MAX_PARAMS 227 854 855 /* Specify the starting bitrate, 11B and 11A/G rates can be specified in 856 * multiples of 0.5 So for 5.5 mbps => 11. for MCS 0 - 7 rates, Bit 7 should 857 * set to 1 and Bit 0-6 represent the MCS index. so for MCS2 => 130. 858 * Any invalid non-zero value or unsupported rate will set the start rate 859 * to 6 mbps. 860 */ 861 #define WCN36XX_HAL_CFG_ENABLE_DYNAMIC_RA_START_RATE 210 862 863 /* Message definitons - All the messages below need to be packed */ 864 865 /* Definition for HAL API Version. */ 866 struct wcnss_wlan_version { 867 u8 revision; 868 u8 version; 869 u8 minor; 870 u8 major; 871 } __packed; 872 873 /* Definition for Encryption Keys */ 874 struct wcn36xx_hal_keys { 875 u8 id; 876 877 /* 0 for multicast */ 878 u8 unicast; 879 880 enum ani_key_direction direction; 881 882 /* Usage is unknown */ 883 u8 rsc[WLAN_MAX_KEY_RSC_LEN]; 884 885 /* =1 for authenticator,=0 for supplicant */ 886 u8 pae_role; 887 888 u16 length; 889 u8 key[WCN36XX_HAL_MAC_MAX_KEY_LENGTH]; 890 } __packed; 891 892 /* 893 * set_sta_key_params Moving here since it is shared by 894 * configbss/setstakey msgs 895 */ 896 struct wcn36xx_hal_set_sta_key_params { 897 /* STA Index */ 898 u16 sta_index; 899 900 /* Encryption Type used with peer */ 901 enum ani_ed_type enc_type; 902 903 /* STATIC/DYNAMIC - valid only for WEP */ 904 enum ani_wep_type wep_type; 905 906 /* Default WEP key, valid only for static WEP, must between 0 and 3. */ 907 u8 def_wep_idx; 908 909 /* valid only for non-static WEP encyrptions */ 910 struct wcn36xx_hal_keys key[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS]; 911 912 /* 913 * Control for Replay Count, 1= Single TID based replay count on Tx 914 * 0 = Per TID based replay count on TX 915 */ 916 u8 single_tid_rc; 917 918 } __packed; 919 920 /* 4-byte control message header used by HAL*/ 921 struct wcn36xx_hal_msg_header { 922 enum wcn36xx_hal_host_msg_type msg_type:16; 923 enum wcn36xx_hal_host_msg_version msg_version:16; 924 u32 len; 925 } __packed; 926 927 /* Config format required by HAL for each CFG item*/ 928 struct wcn36xx_hal_cfg { 929 /* Cfg Id. The Id required by HAL is exported by HAL 930 * in shared header file between UMAC and HAL.*/ 931 u16 id; 932 933 /* Length of the Cfg. This parameter is used to go to next cfg 934 * in the TLV format.*/ 935 u16 len; 936 937 /* Padding bytes for unaligned address's */ 938 u16 pad_bytes; 939 940 /* Reserve bytes for making cfgVal to align address */ 941 u16 reserve; 942 943 /* Following the uCfgLen field there should be a 'uCfgLen' bytes 944 * containing the uCfgValue ; u8 uCfgValue[uCfgLen] */ 945 } __packed; 946 947 struct wcn36xx_hal_mac_start_parameters { 948 /* Drive Type - Production or FTM etc */ 949 enum driver_type type; 950 951 /* Length of the config buffer */ 952 u32 len; 953 954 /* Following this there is a TLV formatted buffer of length 955 * "len" bytes containing all config values. 956 * The TLV is expected to be formatted like this: 957 * 0 15 31 31+CFG_LEN-1 length-1 958 * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......| 959 */ 960 } __packed; 961 962 struct wcn36xx_hal_mac_start_req_msg { 963 /* config buffer must start in TLV format just here */ 964 struct wcn36xx_hal_msg_header header; 965 struct wcn36xx_hal_mac_start_parameters params; 966 } __packed; 967 968 struct wcn36xx_hal_mac_start_rsp_params { 969 /* success or failure */ 970 u16 status; 971 972 /* Max number of STA supported by the device */ 973 u8 stations; 974 975 /* Max number of BSS supported by the device */ 976 u8 bssids; 977 978 /* API Version */ 979 struct wcnss_wlan_version version; 980 981 /* CRM build information */ 982 u8 crm_version[WCN36XX_HAL_VERSION_LENGTH]; 983 984 /* hardware/chipset/misc version information */ 985 u8 wlan_version[WCN36XX_HAL_VERSION_LENGTH]; 986 987 } __packed; 988 989 struct wcn36xx_hal_mac_start_rsp_msg { 990 struct wcn36xx_hal_msg_header header; 991 struct wcn36xx_hal_mac_start_rsp_params start_rsp_params; 992 } __packed; 993 994 struct wcn36xx_hal_mac_stop_req_params { 995 /* The reason for which the device is being stopped */ 996 enum wcn36xx_hal_stop_type reason; 997 998 } __packed; 999 1000 struct wcn36xx_hal_mac_stop_req_msg { 1001 struct wcn36xx_hal_msg_header header; 1002 struct wcn36xx_hal_mac_stop_req_params stop_req_params; 1003 } __packed; 1004 1005 struct wcn36xx_hal_mac_stop_rsp_msg { 1006 struct wcn36xx_hal_msg_header header; 1007 1008 /* success or failure */ 1009 u32 status; 1010 } __packed; 1011 1012 struct wcn36xx_hal_update_cfg_req_msg { 1013 /* 1014 * Note: The length specified in tHalUpdateCfgReqMsg messages should be 1015 * header.msgLen = sizeof(tHalUpdateCfgReqMsg) + uConfigBufferLen 1016 */ 1017 struct wcn36xx_hal_msg_header header; 1018 1019 /* Length of the config buffer. Allows UMAC to update multiple CFGs */ 1020 u32 len; 1021 1022 /* 1023 * Following this there is a TLV formatted buffer of length 1024 * "uConfigBufferLen" bytes containing all config values. 1025 * The TLV is expected to be formatted like this: 1026 * 0 15 31 31+CFG_LEN-1 length-1 1027 * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......| 1028 */ 1029 1030 } __packed; 1031 1032 struct wcn36xx_hal_update_cfg_rsp_msg { 1033 struct wcn36xx_hal_msg_header header; 1034 1035 /* success or failure */ 1036 u32 status; 1037 1038 } __packed; 1039 1040 /* Frame control field format (2 bytes) */ 1041 struct wcn36xx_hal_mac_frame_ctl { 1042 1043 #ifndef ANI_LITTLE_BIT_ENDIAN 1044 1045 u8 subType:4; 1046 u8 type:2; 1047 u8 protVer:2; 1048 1049 u8 order:1; 1050 u8 wep:1; 1051 u8 moreData:1; 1052 u8 powerMgmt:1; 1053 u8 retry:1; 1054 u8 moreFrag:1; 1055 u8 fromDS:1; 1056 u8 toDS:1; 1057 1058 #else 1059 1060 u8 protVer:2; 1061 u8 type:2; 1062 u8 subType:4; 1063 1064 u8 toDS:1; 1065 u8 fromDS:1; 1066 u8 moreFrag:1; 1067 u8 retry:1; 1068 u8 powerMgmt:1; 1069 u8 moreData:1; 1070 u8 wep:1; 1071 u8 order:1; 1072 1073 #endif 1074 1075 }; 1076 1077 /* Sequence control field */ 1078 struct wcn36xx_hal_mac_seq_ctl { 1079 u8 fragNum:4; 1080 u8 seqNumLo:4; 1081 u8 seqNumHi:8; 1082 }; 1083 1084 /* Management header format */ 1085 struct wcn36xx_hal_mac_mgmt_hdr { 1086 struct wcn36xx_hal_mac_frame_ctl fc; 1087 u8 durationLo; 1088 u8 durationHi; 1089 u8 da[6]; 1090 u8 sa[6]; 1091 u8 bssId[6]; 1092 struct wcn36xx_hal_mac_seq_ctl seqControl; 1093 }; 1094 1095 /* FIXME: pronto v1 apparently has 4 */ 1096 #define WCN36XX_HAL_NUM_BSSID 2 1097 1098 /* Scan Entry to hold active BSS idx's */ 1099 struct wcn36xx_hal_scan_entry { 1100 u8 bss_index[WCN36XX_HAL_NUM_BSSID]; 1101 u8 active_bss_count; 1102 }; 1103 1104 struct wcn36xx_hal_init_scan_req_msg { 1105 struct wcn36xx_hal_msg_header header; 1106 1107 /* LEARN - AP Role 1108 SCAN - STA Role */ 1109 enum wcn36xx_hal_sys_mode mode; 1110 1111 /* BSSID of the BSS */ 1112 u8 bssid[ETH_ALEN]; 1113 1114 /* Whether BSS needs to be notified */ 1115 u8 notify; 1116 1117 /* Kind of frame to be used for notifying the BSS (Data Null, QoS 1118 * Null, or CTS to Self). Must always be a valid frame type. */ 1119 u8 frame_type; 1120 1121 /* UMAC has the option of passing the MAC frame to be used for 1122 * notifying the BSS. If non-zero, HAL will use the MAC frame 1123 * buffer pointed to by macMgmtHdr. If zero, HAL will generate the 1124 * appropriate MAC frame based on frameType. */ 1125 u8 frame_len; 1126 1127 /* Following the framelength there is a MAC frame buffer if 1128 * frameLength is non-zero. */ 1129 struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; 1130 1131 /* Entry to hold number of active BSS idx's */ 1132 struct wcn36xx_hal_scan_entry scan_entry; 1133 }; 1134 1135 struct wcn36xx_hal_init_scan_con_req_msg { 1136 struct wcn36xx_hal_msg_header header; 1137 1138 /* LEARN - AP Role 1139 SCAN - STA Role */ 1140 enum wcn36xx_hal_sys_mode mode; 1141 1142 /* BSSID of the BSS */ 1143 u8 bssid[ETH_ALEN]; 1144 1145 /* Whether BSS needs to be notified */ 1146 u8 notify; 1147 1148 /* Kind of frame to be used for notifying the BSS (Data Null, QoS 1149 * Null, or CTS to Self). Must always be a valid frame type. */ 1150 u8 frame_type; 1151 1152 /* UMAC has the option of passing the MAC frame to be used for 1153 * notifying the BSS. If non-zero, HAL will use the MAC frame 1154 * buffer pointed to by macMgmtHdr. If zero, HAL will generate the 1155 * appropriate MAC frame based on frameType. */ 1156 u8 frame_length; 1157 1158 /* Following the framelength there is a MAC frame buffer if 1159 * frameLength is non-zero. */ 1160 struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; 1161 1162 /* Entry to hold number of active BSS idx's */ 1163 struct wcn36xx_hal_scan_entry scan_entry; 1164 1165 /* Single NoA usage in Scanning */ 1166 u8 use_noa; 1167 1168 /* Indicates the scan duration (in ms) */ 1169 u16 scan_duration; 1170 1171 }; 1172 1173 struct wcn36xx_hal_init_scan_rsp_msg { 1174 struct wcn36xx_hal_msg_header header; 1175 1176 /* success or failure */ 1177 u32 status; 1178 1179 } __packed; 1180 1181 struct wcn36xx_hal_start_scan_req_msg { 1182 struct wcn36xx_hal_msg_header header; 1183 1184 /* Indicates the channel to scan */ 1185 u8 scan_channel; 1186 } __packed; 1187 1188 struct wcn36xx_hal_start_rsp_msg { 1189 struct wcn36xx_hal_msg_header header; 1190 1191 /* success or failure */ 1192 u32 status; 1193 1194 u32 start_tsf[2]; 1195 u8 tx_mgmt_power; 1196 1197 } __packed; 1198 1199 struct wcn36xx_hal_end_scan_req_msg { 1200 struct wcn36xx_hal_msg_header header; 1201 1202 /* Indicates the channel to stop scanning. Not used really. But 1203 * retained for symmetry with "start Scan" message. It can also 1204 * help in error check if needed. */ 1205 u8 scan_channel; 1206 } __packed; 1207 1208 struct wcn36xx_hal_end_scan_rsp_msg { 1209 struct wcn36xx_hal_msg_header header; 1210 1211 /* success or failure */ 1212 u32 status; 1213 } __packed; 1214 1215 struct wcn36xx_hal_finish_scan_req_msg { 1216 struct wcn36xx_hal_msg_header header; 1217 1218 /* Identifies the operational state of the AP/STA 1219 * LEARN - AP Role SCAN - STA Role */ 1220 enum wcn36xx_hal_sys_mode mode; 1221 1222 /* Operating channel to tune to. */ 1223 u8 oper_channel; 1224 1225 /* Channel Bonding state If 20/40 MHz is operational, this will 1226 * indicate the 40 MHz extension channel in combination with the 1227 * control channel */ 1228 enum phy_chan_bond_state cb_state; 1229 1230 /* BSSID of the BSS */ 1231 u8 bssid[ETH_ALEN]; 1232 1233 /* Whether BSS needs to be notified */ 1234 u8 notify; 1235 1236 /* Kind of frame to be used for notifying the BSS (Data Null, QoS 1237 * Null, or CTS to Self). Must always be a valid frame type. */ 1238 u8 frame_type; 1239 1240 /* UMAC has the option of passing the MAC frame to be used for 1241 * notifying the BSS. If non-zero, HAL will use the MAC frame 1242 * buffer pointed to by macMgmtHdr. If zero, HAL will generate the 1243 * appropriate MAC frame based on frameType. */ 1244 u8 frame_length; 1245 1246 /* Following the framelength there is a MAC frame buffer if 1247 * frameLength is non-zero. */ 1248 struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; 1249 1250 /* Entry to hold number of active BSS idx's */ 1251 struct wcn36xx_hal_scan_entry scan_entry; 1252 1253 } __packed; 1254 1255 struct wcn36xx_hal_finish_scan_rsp_msg { 1256 struct wcn36xx_hal_msg_header header; 1257 1258 /* success or failure */ 1259 u32 status; 1260 1261 } __packed; 1262 1263 enum wcn36xx_hal_scan_type { 1264 WCN36XX_HAL_SCAN_TYPE_PASSIVE = 0x00, 1265 WCN36XX_HAL_SCAN_TYPE_ACTIVE = WCN36XX_HAL_MAX_ENUM_SIZE 1266 }; 1267 1268 struct wcn36xx_hal_mac_ssid { 1269 u8 length; 1270 u8 ssid[32]; 1271 } __packed; 1272 1273 struct wcn36xx_hal_start_scan_offload_req_msg { 1274 struct wcn36xx_hal_msg_header header; 1275 1276 /* BSSIDs hot list */ 1277 u8 num_bssid; 1278 u8 bssids[4][ETH_ALEN]; 1279 1280 /* Directed probe-requests will be sent for listed SSIDs (max 10)*/ 1281 u8 num_ssid; 1282 struct wcn36xx_hal_mac_ssid ssids[10]; 1283 1284 /* Report AP with hidden ssid */ 1285 u8 scan_hidden; 1286 1287 /* Self MAC address */ 1288 u8 mac[ETH_ALEN]; 1289 1290 /* BSS type */ 1291 enum wcn36xx_hal_bss_type bss_type; 1292 1293 /* Scan type */ 1294 enum wcn36xx_hal_scan_type scan_type; 1295 1296 /* Minimum scanning time on each channel (ms) */ 1297 u32 min_ch_time; 1298 1299 /* Maximum scanning time on each channel */ 1300 u32 max_ch_time; 1301 1302 /* Is a p2p search */ 1303 u8 p2p_search; 1304 1305 /* Channels to scan */ 1306 u8 num_channel; 1307 u8 channels[80]; 1308 1309 /* IE field */ 1310 u16 ie_len; 1311 u8 ie[WCN36XX_MAX_SCAN_IE_LEN]; 1312 } __packed; 1313 1314 struct wcn36xx_hal_start_scan_offload_rsp_msg { 1315 struct wcn36xx_hal_msg_header header; 1316 1317 /* success or failure */ 1318 u32 status; 1319 } __packed; 1320 1321 enum wcn36xx_hal_scan_offload_ind_type { 1322 /* Scan has been started */ 1323 WCN36XX_HAL_SCAN_IND_STARTED = 0x01, 1324 /* Scan has been completed */ 1325 WCN36XX_HAL_SCAN_IND_COMPLETED = 0x02, 1326 /* Moved to foreign channel */ 1327 WCN36XX_HAL_SCAN_IND_FOREIGN_CHANNEL = 0x08, 1328 /* scan request has been dequeued */ 1329 WCN36XX_HAL_SCAN_IND_DEQUEUED = 0x10, 1330 /* preempted by other high priority scan */ 1331 WCN36XX_HAL_SCAN_IND_PREEMPTED = 0x20, 1332 /* scan start failed */ 1333 WCN36XX_HAL_SCAN_IND_FAILED = 0x40, 1334 /*scan restarted */ 1335 WCN36XX_HAL_SCAN_IND_RESTARTED = 0x80, 1336 WCN36XX_HAL_SCAN_IND_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 1337 }; 1338 1339 struct wcn36xx_hal_scan_offload_ind { 1340 struct wcn36xx_hal_msg_header header; 1341 1342 u32 type; 1343 u32 channel_mhz; 1344 u32 scan_id; 1345 } __packed; 1346 1347 struct wcn36xx_hal_stop_scan_offload_req_msg { 1348 struct wcn36xx_hal_msg_header header; 1349 } __packed; 1350 1351 struct wcn36xx_hal_stop_scan_offload_rsp_msg { 1352 struct wcn36xx_hal_msg_header header; 1353 1354 /* success or failure */ 1355 u32 status; 1356 } __packed; 1357 1358 #define WCN36XX_HAL_CHAN_REG1_MIN_PWR_MASK 0x000000ff 1359 #define WCN36XX_HAL_CHAN_REG1_MAX_PWR_MASK 0x0000ff00 1360 #define WCN36XX_HAL_CHAN_REG1_REG_PWR_MASK 0x00ff0000 1361 #define WCN36XX_HAL_CHAN_REG1_CLASS_ID_MASK 0xff000000 1362 #define WCN36XX_HAL_CHAN_REG2_ANT_GAIN_MASK 0x000000ff 1363 #define WCN36XX_HAL_CHAN_INFO_FLAG_PASSIVE BIT(7) 1364 #define WCN36XX_HAL_CHAN_INFO_FLAG_DFS BIT(10) 1365 #define WCN36XX_HAL_CHAN_INFO_FLAG_HT BIT(11) 1366 #define WCN36XX_HAL_CHAN_INFO_FLAG_VHT BIT(12) 1367 #define WCN36XX_HAL_CHAN_INFO_PHY_11A 0 1368 #define WCN36XX_HAL_CHAN_INFO_PHY_11BG 1 1369 #define WCN36XX_HAL_DEFAULT_ANT_GAIN 6 1370 #define WCN36XX_HAL_DEFAULT_MIN_POWER 6 1371 1372 struct wcn36xx_hal_channel_param { 1373 u32 mhz; 1374 u32 band_center_freq1; 1375 u32 band_center_freq2; 1376 u32 channel_info; 1377 u32 reg_info_1; 1378 u32 reg_info_2; 1379 } __packed; 1380 1381 struct wcn36xx_hal_update_channel_list_req_msg { 1382 struct wcn36xx_hal_msg_header header; 1383 1384 u8 num_channel; 1385 struct wcn36xx_hal_channel_param channels[80]; 1386 } __packed; 1387 1388 enum wcn36xx_hal_rate_index { 1389 HW_RATE_INDEX_1MBPS = 0x82, 1390 HW_RATE_INDEX_2MBPS = 0x84, 1391 HW_RATE_INDEX_5_5MBPS = 0x8B, 1392 HW_RATE_INDEX_6MBPS = 0x0C, 1393 HW_RATE_INDEX_9MBPS = 0x12, 1394 HW_RATE_INDEX_11MBPS = 0x96, 1395 HW_RATE_INDEX_12MBPS = 0x18, 1396 HW_RATE_INDEX_18MBPS = 0x24, 1397 HW_RATE_INDEX_24MBPS = 0x30, 1398 HW_RATE_INDEX_36MBPS = 0x48, 1399 HW_RATE_INDEX_48MBPS = 0x60, 1400 HW_RATE_INDEX_54MBPS = 0x6C 1401 }; 1402 1403 struct wcn36xx_hal_supported_rates { 1404 /* 1405 * For Self STA Entry: this represents Self Mode. 1406 * For Peer Stations, this represents the mode of the peer. 1407 * On Station: 1408 * 1409 * --this mode is updated when PE adds the Self Entry. 1410 * 1411 * -- OR when PE sends 'ADD_BSS' message and station context in BSS 1412 * is used to indicate the mode of the AP. 1413 * 1414 * ON AP: 1415 * 1416 * -- this mode is updated when PE sends 'ADD_BSS' and Sta entry 1417 * for that BSS is used to indicate the self mode of the AP. 1418 * 1419 * -- OR when a station is associated, PE sends 'ADD_STA' message 1420 * with this mode updated. 1421 */ 1422 1423 enum sta_rate_mode op_rate_mode; 1424 1425 /* 11b, 11a and aniLegacyRates are IE rates which gives rate in 1426 * unit of 500Kbps */ 1427 u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES]; 1428 u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES]; 1429 u16 legacy_rates[WCN36XX_HAL_NUM_POLARIS_RATES]; 1430 u16 reserved; 1431 1432 /* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be 1433 * supported) First 26 bits are reserved for those Titan rates and 1434 * the last 4 bits(bit28-31) for Taurus, 2(bit26-27) bits are 1435 * reserved. */ 1436 /* Titan and Taurus Rates */ 1437 u32 enhanced_rate_bitmap; 1438 1439 /* 1440 * 0-76 bits used, remaining reserved 1441 * bits 0-15 and 32 should be set. 1442 */ 1443 u8 supported_mcs_set[WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET]; 1444 1445 /* 1446 * RX Highest Supported Data Rate defines the highest data 1447 * rate that the STA is able to receive, in unites of 1Mbps. 1448 * This value is derived from "Supported MCS Set field" inside 1449 * the HT capability element. 1450 */ 1451 u16 rx_highest_data_rate; 1452 1453 } __packed; 1454 1455 struct wcn36xx_hal_config_sta_params { 1456 /* BSSID of STA */ 1457 u8 bssid[ETH_ALEN]; 1458 1459 /* ASSOC ID, as assigned by UMAC */ 1460 u16 aid; 1461 1462 /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */ 1463 u8 type; 1464 1465 /* Short Preamble Supported. */ 1466 u8 short_preamble_supported; 1467 1468 /* MAC Address of STA */ 1469 u8 mac[ETH_ALEN]; 1470 1471 /* Listen interval of the STA */ 1472 u16 listen_interval; 1473 1474 /* Support for 11e/WMM */ 1475 u8 wmm_enabled; 1476 1477 /* 11n HT capable STA */ 1478 u8 ht_capable; 1479 1480 /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ 1481 u8 tx_channel_width_set; 1482 1483 /* RIFS mode 0 - NA, 1 - Allowed */ 1484 u8 rifs_mode; 1485 1486 /* L-SIG TXOP Protection mechanism 1487 0 - No Support, 1 - Supported 1488 SG - there is global field */ 1489 u8 lsig_txop_protection; 1490 1491 /* Max Ampdu Size supported by STA. TPE programming. 1492 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */ 1493 u8 max_ampdu_size; 1494 1495 /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */ 1496 u8 max_ampdu_density; 1497 1498 /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */ 1499 u8 max_amsdu_size; 1500 1501 /* Short GI support for 40Mhz packets */ 1502 u8 sgi_40mhz; 1503 1504 /* Short GI support for 20Mhz packets */ 1505 u8 sgi_20Mhz; 1506 1507 /* TODO move this parameter to the end for 3680 */ 1508 /* These rates are the intersection of peer and self capabilities. */ 1509 struct wcn36xx_hal_supported_rates supported_rates; 1510 1511 /* Robust Management Frame (RMF) enabled/disabled */ 1512 u8 rmf; 1513 1514 /* The unicast encryption type in the association */ 1515 u32 encrypt_type; 1516 1517 /* HAL should update the existing STA entry, if this flag is set. UMAC 1518 will set this flag in case of RE-ASSOC, where we want to reuse the 1519 old STA ID. 0 = Add, 1 = Update */ 1520 u8 action; 1521 1522 /* U-APSD Flags: 1b per AC. Encoded as follows: 1523 b7 b6 b5 b4 b3 b2 b1 b0 = 1524 X X X X BE BK VI VO */ 1525 u8 uapsd; 1526 1527 /* Max SP Length */ 1528 u8 max_sp_len; 1529 1530 /* 11n Green Field preamble support 1531 0 - Not supported, 1 - Supported */ 1532 u8 green_field_capable; 1533 1534 /* MIMO Power Save mode */ 1535 enum wcn36xx_hal_ht_mimo_state mimo_ps; 1536 1537 /* Delayed BA Support */ 1538 u8 delayed_ba_support; 1539 1540 /* Max AMPDU duration in 32us */ 1541 u8 max_ampdu_duration; 1542 1543 /* HT STA should set it to 1 if it is enabled in BSS. HT STA should 1544 * set it to 0 if AP does not support it. This indication is sent 1545 * to HAL and HAL uses this flag to pickup up appropriate 40Mhz 1546 * rates. */ 1547 u8 dsss_cck_mode_40mhz; 1548 1549 /* Valid STA Idx when action=Update. Set to 0xFF when invalid! 1550 * Retained for backward compalibity with existing HAL code */ 1551 u8 sta_index; 1552 1553 /* BSSID of BSS to which station is associated. Set to 0xFF when 1554 * invalid. Retained for backward compalibity with existing HAL 1555 * code */ 1556 u8 bssid_index; 1557 1558 u8 p2p; 1559 1560 /* TODO add this parameter for 3680. */ 1561 /* Reserved to align next field on a dword boundary */ 1562 /* u8 reserved; */ 1563 } __packed; 1564 1565 struct wcn36xx_hal_config_sta_req_msg { 1566 struct wcn36xx_hal_msg_header header; 1567 struct wcn36xx_hal_config_sta_params sta_params; 1568 } __packed; 1569 1570 struct wcn36xx_hal_supported_rates_v1 { 1571 /* For Self STA Entry: this represents Self Mode. 1572 * For Peer Stations, this represents the mode of the peer. 1573 * On Station: 1574 * 1575 * --this mode is updated when PE adds the Self Entry. 1576 * 1577 * -- OR when PE sends 'ADD_BSS' message and station context in BSS 1578 * is used to indicate the mode of the AP. 1579 * 1580 * ON AP: 1581 * 1582 * -- this mode is updated when PE sends 'ADD_BSS' and Sta entry 1583 * for that BSS is used to indicate the self mode of the AP. 1584 * 1585 * -- OR when a station is associated, PE sends 'ADD_STA' message 1586 * with this mode updated. 1587 */ 1588 1589 enum sta_rate_mode op_rate_mode; 1590 1591 /* 11b, 11a and aniLegacyRates are IE rates which gives rate in 1592 * unit of 500Kbps 1593 */ 1594 u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES]; 1595 u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES]; 1596 u16 legacy_rates[WCN36XX_HAL_NUM_POLARIS_RATES]; 1597 u16 reserved; 1598 1599 /* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be 1600 * supported) First 26 bits are reserved for those Titan rates and 1601 * the last 4 bits(bit28-31) for Taurus, 2(bit26-27) bits are 1602 * reserved 1603 * Titan and Taurus Rates 1604 */ 1605 u32 enhanced_rate_bitmap; 1606 1607 /* 0-76 bits used, remaining reserved 1608 * bits 0-15 and 32 should be set. 1609 */ 1610 u8 supported_mcs_set[WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET]; 1611 1612 /* RX Highest Supported Data Rate defines the highest data 1613 * rate that the STA is able to receive, in unites of 1Mbps. 1614 * This value is derived from "Supported MCS Set field" inside 1615 * the HT capability element. 1616 */ 1617 u16 rx_highest_data_rate; 1618 1619 /* Indicates the Maximum MCS that can be received for each spatial 1620 * stream. 1621 */ 1622 u16 vht_rx_mcs_map; 1623 1624 /* Indicates the highest VHT data rate that the STA is able to 1625 * receive. 1626 */ 1627 u16 vht_rx_highest_data_rate; 1628 1629 /* Indicates the Maximum MCS that can be transmitted for each spatial 1630 * stream. 1631 */ 1632 u16 vht_tx_mcs_map; 1633 1634 /* Indicates the highest VHT data rate that the STA is able to 1635 * transmit. 1636 */ 1637 u16 vht_tx_highest_data_rate; 1638 } __packed; 1639 1640 struct wcn36xx_hal_config_sta_params_v1 { 1641 /* BSSID of STA */ 1642 u8 bssid[ETH_ALEN]; 1643 1644 /* ASSOC ID, as assigned by UMAC */ 1645 u16 aid; 1646 1647 /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */ 1648 u8 type; 1649 1650 /* Short Preamble Supported. */ 1651 u8 short_preamble_supported; 1652 1653 /* MAC Address of STA */ 1654 u8 mac[ETH_ALEN]; 1655 1656 /* Listen interval of the STA */ 1657 u16 listen_interval; 1658 1659 /* Support for 11e/WMM */ 1660 u8 wmm_enabled; 1661 1662 /* 11n HT capable STA */ 1663 u8 ht_capable; 1664 1665 /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ 1666 u8 tx_channel_width_set; 1667 1668 /* RIFS mode 0 - NA, 1 - Allowed */ 1669 u8 rifs_mode; 1670 1671 /* L-SIG TXOP Protection mechanism 1672 0 - No Support, 1 - Supported 1673 SG - there is global field */ 1674 u8 lsig_txop_protection; 1675 1676 /* Max Ampdu Size supported by STA. TPE programming. 1677 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */ 1678 u8 max_ampdu_size; 1679 1680 /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */ 1681 u8 max_ampdu_density; 1682 1683 /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */ 1684 u8 max_amsdu_size; 1685 1686 /* Short GI support for 40Mhz packets */ 1687 u8 sgi_40mhz; 1688 1689 /* Short GI support for 20Mhz packets */ 1690 u8 sgi_20Mhz; 1691 1692 /* Robust Management Frame (RMF) enabled/disabled */ 1693 u8 rmf; 1694 1695 /* The unicast encryption type in the association */ 1696 u32 encrypt_type; 1697 1698 /* HAL should update the existing STA entry, if this flag is set. UMAC 1699 will set this flag in case of RE-ASSOC, where we want to reuse the 1700 old STA ID. 0 = Add, 1 = Update */ 1701 u8 action; 1702 1703 /* U-APSD Flags: 1b per AC. Encoded as follows: 1704 b7 b6 b5 b4 b3 b2 b1 b0 = 1705 X X X X BE BK VI VO */ 1706 u8 uapsd; 1707 1708 /* Max SP Length */ 1709 u8 max_sp_len; 1710 1711 /* 11n Green Field preamble support 1712 0 - Not supported, 1 - Supported */ 1713 u8 green_field_capable; 1714 1715 /* MIMO Power Save mode */ 1716 enum wcn36xx_hal_ht_mimo_state mimo_ps; 1717 1718 /* Delayed BA Support */ 1719 u8 delayed_ba_support; 1720 1721 /* Max AMPDU duration in 32us */ 1722 u8 max_ampdu_duration; 1723 1724 /* HT STA should set it to 1 if it is enabled in BSS. HT STA should 1725 * set it to 0 if AP does not support it. This indication is sent 1726 * to HAL and HAL uses this flag to pickup up appropriate 40Mhz 1727 * rates. */ 1728 u8 dsss_cck_mode_40mhz; 1729 1730 /* Valid STA Idx when action=Update. Set to 0xFF when invalid! 1731 * Retained for backward compalibity with existing HAL code */ 1732 u8 sta_index; 1733 1734 /* BSSID of BSS to which station is associated. Set to 0xFF when 1735 * invalid. Retained for backward compalibity with existing HAL 1736 * code */ 1737 u8 bssid_index; 1738 1739 u8 p2p; 1740 1741 /* Reserved to align next field on a dword boundary */ 1742 u8 ht_ldpc_enabled:1; 1743 u8 vht_ldpc_enabled:1; 1744 u8 vht_tx_bf_enabled:1; 1745 u8 vht_tx_mu_beamformee_capable:1; 1746 u8 reserved:4; 1747 1748 /* These rates are the intersection of peer and self capabilities. */ 1749 struct wcn36xx_hal_supported_rates_v1 supported_rates; 1750 1751 u8 vht_capable; 1752 u8 vht_tx_channel_width_set; 1753 1754 } __packed; 1755 1756 #define WCN36XX_DIFF_STA_PARAMS_V1_NOVHT 10 1757 1758 struct wcn36xx_hal_config_sta_req_msg_v1 { 1759 struct wcn36xx_hal_msg_header header; 1760 struct wcn36xx_hal_config_sta_params_v1 sta_params; 1761 } __packed; 1762 1763 struct config_sta_rsp_params { 1764 /* success or failure */ 1765 u32 status; 1766 1767 /* Station index; valid only when 'status' field value SUCCESS */ 1768 u8 sta_index; 1769 1770 /* BSSID Index of BSS to which the station is associated */ 1771 u8 bssid_index; 1772 1773 /* DPU Index for PTK */ 1774 u8 dpu_index; 1775 1776 /* DPU Index for GTK */ 1777 u8 bcast_dpu_index; 1778 1779 /* DPU Index for IGTK */ 1780 u8 bcast_mgmt_dpu_idx; 1781 1782 /* PTK DPU signature */ 1783 u8 uc_ucast_sig; 1784 1785 /* GTK DPU isignature */ 1786 u8 uc_bcast_sig; 1787 1788 /* IGTK DPU signature */ 1789 u8 uc_mgmt_sig; 1790 1791 u8 p2p; 1792 1793 } __packed; 1794 1795 struct wcn36xx_hal_config_sta_rsp_msg { 1796 struct wcn36xx_hal_msg_header header; 1797 1798 struct config_sta_rsp_params params; 1799 } __packed; 1800 1801 /* Delete STA Request message */ 1802 struct wcn36xx_hal_delete_sta_req_msg { 1803 struct wcn36xx_hal_msg_header header; 1804 1805 /* Index of STA to delete */ 1806 u8 sta_index; 1807 1808 } __packed; 1809 1810 /* Delete STA Response message */ 1811 struct wcn36xx_hal_delete_sta_rsp_msg { 1812 struct wcn36xx_hal_msg_header header; 1813 1814 /* success or failure */ 1815 u32 status; 1816 1817 /* Index of STA deleted */ 1818 u8 sta_id; 1819 } __packed; 1820 1821 /* 12 Bytes long because this structure can be used to represent rate and 1822 * extended rate set IEs. The parser assume this to be at least 12 */ 1823 struct wcn36xx_hal_rate_set { 1824 u8 num_rates; 1825 u8 rate[WCN36XX_HAL_MAC_RATESET_EID_MAX]; 1826 } __packed; 1827 1828 /* access category record */ 1829 struct wcn36xx_hal_aci_aifsn { 1830 #ifndef ANI_LITTLE_BIT_ENDIAN 1831 u8 rsvd:1; 1832 u8 aci:2; 1833 u8 acm:1; 1834 u8 aifsn:4; 1835 #else 1836 u8 aifsn:4; 1837 u8 acm:1; 1838 u8 aci:2; 1839 u8 rsvd:1; 1840 #endif 1841 } __packed; 1842 1843 /* contention window size */ 1844 struct wcn36xx_hal_mac_cw { 1845 #ifndef ANI_LITTLE_BIT_ENDIAN 1846 u8 max:4; 1847 u8 min:4; 1848 #else 1849 u8 min:4; 1850 u8 max:4; 1851 #endif 1852 } __packed; 1853 1854 struct wcn36xx_hal_edca_param_record { 1855 struct wcn36xx_hal_aci_aifsn aci; 1856 struct wcn36xx_hal_mac_cw cw; 1857 u16 txop_limit; 1858 } __packed; 1859 1860 /* Concurrency role. These are generic IDs that identify the various roles 1861 * in the software system. */ 1862 enum wcn36xx_hal_con_mode { 1863 WCN36XX_HAL_STA_MODE = 0, 1864 1865 /* to support softAp mode . This is misleading. 1866 It means AP MODE only. */ 1867 WCN36XX_HAL_STA_SAP_MODE = 1, 1868 1869 WCN36XX_HAL_P2P_CLIENT_MODE, 1870 WCN36XX_HAL_P2P_GO_MODE, 1871 WCN36XX_HAL_MONITOR_MODE, 1872 }; 1873 1874 /* This is a bit pattern to be set for each mode 1875 * bit 0 - sta mode 1876 * bit 1 - ap mode 1877 * bit 2 - p2p client mode 1878 * bit 3 - p2p go mode */ 1879 enum wcn36xx_hal_concurrency_mode { 1880 HAL_STA = 1, 1881 HAL_SAP = 2, 1882 1883 /* to support sta, softAp mode . This means STA+AP mode */ 1884 HAL_STA_SAP = 3, 1885 1886 HAL_P2P_CLIENT = 4, 1887 HAL_P2P_GO = 8, 1888 HAL_MAX_CONCURRENCY_PERSONA = 4 1889 }; 1890 1891 struct wcn36xx_hal_config_bss_params { 1892 /* BSSID */ 1893 u8 bssid[ETH_ALEN]; 1894 1895 /* Self Mac Address */ 1896 u8 self_mac_addr[ETH_ALEN]; 1897 1898 /* BSS type */ 1899 enum wcn36xx_hal_bss_type bss_type; 1900 1901 /* Operational Mode: AP =0, STA = 1 */ 1902 u8 oper_mode; 1903 1904 /* Network Type */ 1905 enum wcn36xx_hal_nw_type nw_type; 1906 1907 /* Used to classify PURE_11G/11G_MIXED to program MTU */ 1908 u8 short_slot_time_supported; 1909 1910 /* Co-exist with 11a STA */ 1911 u8 lla_coexist; 1912 1913 /* Co-exist with 11b STA */ 1914 u8 llb_coexist; 1915 1916 /* Co-exist with 11g STA */ 1917 u8 llg_coexist; 1918 1919 /* Coexistence with 11n STA */ 1920 u8 ht20_coexist; 1921 1922 /* Non GF coexist flag */ 1923 u8 lln_non_gf_coexist; 1924 1925 /* TXOP protection support */ 1926 u8 lsig_tx_op_protection_full_support; 1927 1928 /* RIFS mode */ 1929 u8 rifs_mode; 1930 1931 /* Beacon Interval in TU */ 1932 u16 beacon_interval; 1933 1934 /* DTIM period */ 1935 u8 dtim_period; 1936 1937 /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ 1938 u8 tx_channel_width_set; 1939 1940 /* Operating channel */ 1941 u8 oper_channel; 1942 1943 /* Extension channel for channel bonding */ 1944 u8 ext_channel; 1945 1946 /* Reserved to align next field on a dword boundary */ 1947 u8 reserved; 1948 1949 /* TODO move sta to the end for 3680 */ 1950 /* Context of the station being added in HW 1951 * Add a STA entry for "itself" - 1952 * 1953 * On AP - Add the AP itself in an "STA context" 1954 * 1955 * On STA - Add the AP to which this STA is joining in an 1956 * "STA context" 1957 */ 1958 struct wcn36xx_hal_config_sta_params sta; 1959 /* SSID of the BSS */ 1960 struct wcn36xx_hal_mac_ssid ssid; 1961 1962 /* HAL should update the existing BSS entry, if this flag is set. 1963 * UMAC will set this flag in case of reassoc, where we want to 1964 * resue the old BSSID and still return success 0 = Add, 1 = 1965 * Update */ 1966 u8 action; 1967 1968 /* MAC Rate Set */ 1969 struct wcn36xx_hal_rate_set rateset; 1970 1971 /* Enable/Disable HT capabilities of the BSS */ 1972 u8 ht; 1973 1974 /* Enable/Disable OBSS protection */ 1975 u8 obss_prot_enabled; 1976 1977 /* RMF enabled/disabled */ 1978 u8 rmf; 1979 1980 /* HT Operating Mode operating mode of the 802.11n STA */ 1981 enum wcn36xx_hal_ht_operating_mode ht_oper_mode; 1982 1983 /* Dual CTS Protection: 0 - Unused, 1 - Used */ 1984 u8 dual_cts_protection; 1985 1986 /* Probe Response Max retries */ 1987 u8 max_probe_resp_retry_limit; 1988 1989 /* To Enable Hidden ssid */ 1990 u8 hidden_ssid; 1991 1992 /* To Enable Disable FW Proxy Probe Resp */ 1993 u8 proxy_probe_resp; 1994 1995 /* Boolean to indicate if EDCA params are valid. UMAC might not 1996 * have valid EDCA params or might not desire to apply EDCA params 1997 * during config BSS. 0 implies Not Valid ; Non-Zero implies 1998 * valid */ 1999 u8 edca_params_valid; 2000 2001 /* EDCA Parameters for Best Effort Access Category */ 2002 struct wcn36xx_hal_edca_param_record acbe; 2003 2004 /* EDCA Parameters forBackground Access Category */ 2005 struct wcn36xx_hal_edca_param_record acbk; 2006 2007 /* EDCA Parameters for Video Access Category */ 2008 struct wcn36xx_hal_edca_param_record acvi; 2009 2010 /* EDCA Parameters for Voice Access Category */ 2011 struct wcn36xx_hal_edca_param_record acvo; 2012 2013 /* Ext Bss Config Msg if set */ 2014 u8 ext_set_sta_key_param_valid; 2015 2016 /* SetStaKeyParams for ext bss msg */ 2017 struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param; 2018 2019 /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum 2020 * wcn36xx_hal_con_mode */ 2021 u8 wcn36xx_hal_persona; 2022 2023 u8 spectrum_mgt_enable; 2024 2025 /* HAL fills in the tx power used for mgmt frames in txMgmtPower */ 2026 s8 tx_mgmt_power; 2027 2028 /* maxTxPower has max power to be used after applying the power 2029 * constraint if any */ 2030 s8 max_tx_power; 2031 } __packed; 2032 2033 struct wcn36xx_hal_config_bss_req_msg { 2034 struct wcn36xx_hal_msg_header header; 2035 struct wcn36xx_hal_config_bss_params bss_params; 2036 } __packed; 2037 2038 struct wcn36xx_hal_config_bss_params_v1 { 2039 /* BSSID */ 2040 u8 bssid[ETH_ALEN]; 2041 2042 /* Self Mac Address */ 2043 u8 self_mac_addr[ETH_ALEN]; 2044 2045 /* BSS type */ 2046 enum wcn36xx_hal_bss_type bss_type; 2047 2048 /* Operational Mode: AP =0, STA = 1 */ 2049 u8 oper_mode; 2050 2051 /* Network Type */ 2052 enum wcn36xx_hal_nw_type nw_type; 2053 2054 /* Used to classify PURE_11G/11G_MIXED to program MTU */ 2055 u8 short_slot_time_supported; 2056 2057 /* Co-exist with 11a STA */ 2058 u8 lla_coexist; 2059 2060 /* Co-exist with 11b STA */ 2061 u8 llb_coexist; 2062 2063 /* Co-exist with 11g STA */ 2064 u8 llg_coexist; 2065 2066 /* Coexistence with 11n STA */ 2067 u8 ht20_coexist; 2068 2069 /* Non GF coexist flag */ 2070 u8 lln_non_gf_coexist; 2071 2072 /* TXOP protection support */ 2073 u8 lsig_tx_op_protection_full_support; 2074 2075 /* RIFS mode */ 2076 u8 rifs_mode; 2077 2078 /* Beacon Interval in TU */ 2079 u16 beacon_interval; 2080 2081 /* DTIM period */ 2082 u8 dtim_period; 2083 2084 /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ 2085 u8 tx_channel_width_set; 2086 2087 /* Operating channel */ 2088 u8 oper_channel; 2089 2090 /* Extension channel for channel bonding */ 2091 u8 ext_channel; 2092 2093 /* Reserved to align next field on a dword boundary */ 2094 u8 reserved; 2095 2096 /* SSID of the BSS */ 2097 struct wcn36xx_hal_mac_ssid ssid; 2098 2099 /* HAL should update the existing BSS entry, if this flag is set. 2100 * UMAC will set this flag in case of reassoc, where we want to 2101 * resue the old BSSID and still return success 0 = Add, 1 = 2102 * Update */ 2103 u8 action; 2104 2105 /* MAC Rate Set */ 2106 struct wcn36xx_hal_rate_set rateset; 2107 2108 /* Enable/Disable HT capabilities of the BSS */ 2109 u8 ht; 2110 2111 /* Enable/Disable OBSS protection */ 2112 u8 obss_prot_enabled; 2113 2114 /* RMF enabled/disabled */ 2115 u8 rmf; 2116 2117 /* HT Operating Mode operating mode of the 802.11n STA */ 2118 enum wcn36xx_hal_ht_operating_mode ht_oper_mode; 2119 2120 /* Dual CTS Protection: 0 - Unused, 1 - Used */ 2121 u8 dual_cts_protection; 2122 2123 /* Probe Response Max retries */ 2124 u8 max_probe_resp_retry_limit; 2125 2126 /* To Enable Hidden ssid */ 2127 u8 hidden_ssid; 2128 2129 /* To Enable Disable FW Proxy Probe Resp */ 2130 u8 proxy_probe_resp; 2131 2132 /* Boolean to indicate if EDCA params are valid. UMAC might not 2133 * have valid EDCA params or might not desire to apply EDCA params 2134 * during config BSS. 0 implies Not Valid ; Non-Zero implies 2135 * valid */ 2136 u8 edca_params_valid; 2137 2138 /* EDCA Parameters for Best Effort Access Category */ 2139 struct wcn36xx_hal_edca_param_record acbe; 2140 2141 /* EDCA Parameters forBackground Access Category */ 2142 struct wcn36xx_hal_edca_param_record acbk; 2143 2144 /* EDCA Parameters for Video Access Category */ 2145 struct wcn36xx_hal_edca_param_record acvi; 2146 2147 /* EDCA Parameters for Voice Access Category */ 2148 struct wcn36xx_hal_edca_param_record acvo; 2149 2150 /* Ext Bss Config Msg if set */ 2151 u8 ext_set_sta_key_param_valid; 2152 2153 /* SetStaKeyParams for ext bss msg */ 2154 struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param; 2155 2156 /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum 2157 * wcn36xx_hal_con_mode */ 2158 u8 wcn36xx_hal_persona; 2159 2160 u8 spectrum_mgt_enable; 2161 2162 /* HAL fills in the tx power used for mgmt frames in txMgmtPower */ 2163 s8 tx_mgmt_power; 2164 2165 /* maxTxPower has max power to be used after applying the power 2166 * constraint if any */ 2167 s8 max_tx_power; 2168 2169 /* Context of the station being added in HW 2170 * Add a STA entry for "itself" - 2171 * 2172 * On AP - Add the AP itself in an "STA context" 2173 * 2174 * On STA - Add the AP to which this STA is joining in an 2175 * "STA context" 2176 */ 2177 struct wcn36xx_hal_config_sta_params_v1 sta; 2178 2179 u8 vht_capable; 2180 u8 vht_tx_channel_width_set; 2181 2182 } __packed; 2183 2184 #define WCN36XX_DIFF_BSS_PARAMS_V1_NOVHT (WCN36XX_DIFF_STA_PARAMS_V1_NOVHT + 2) 2185 2186 struct wcn36xx_hal_config_bss_req_msg_v1 { 2187 struct wcn36xx_hal_msg_header header; 2188 struct wcn36xx_hal_config_bss_params_v1 bss_params; 2189 } __packed; 2190 2191 struct wcn36xx_hal_config_bss_rsp_params { 2192 /* Success or Failure */ 2193 u32 status; 2194 2195 /* BSS index allocated by HAL */ 2196 u8 bss_index; 2197 2198 /* DPU descriptor index for PTK */ 2199 u8 dpu_desc_index; 2200 2201 /* PTK DPU signature */ 2202 u8 ucast_dpu_signature; 2203 2204 /* DPU descriptor index for GTK */ 2205 u8 bcast_dpu_desc_indx; 2206 2207 /* GTK DPU signature */ 2208 u8 bcast_dpu_signature; 2209 2210 /* DPU descriptor for IGTK */ 2211 u8 mgmt_dpu_desc_index; 2212 2213 /* IGTK DPU signature */ 2214 u8 mgmt_dpu_signature; 2215 2216 /* Station Index for BSS entry */ 2217 u8 bss_sta_index; 2218 2219 /* Self station index for this BSS */ 2220 u8 bss_self_sta_index; 2221 2222 /* Bcast station for buffering bcast frames in AP role */ 2223 u8 bss_bcast_sta_idx; 2224 2225 /* MAC Address of STA(PEER/SELF) in staContext of configBSSReq */ 2226 u8 mac[ETH_ALEN]; 2227 2228 /* HAL fills in the tx power used for mgmt frames in this field. */ 2229 s8 tx_mgmt_power; 2230 2231 } __packed; 2232 2233 struct wcn36xx_hal_config_bss_rsp_msg { 2234 struct wcn36xx_hal_msg_header header; 2235 struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params; 2236 } __packed; 2237 2238 struct wcn36xx_hal_delete_bss_req_msg { 2239 struct wcn36xx_hal_msg_header header; 2240 2241 /* BSS index to be deleted */ 2242 u8 bss_index; 2243 2244 } __packed; 2245 2246 struct wcn36xx_hal_delete_bss_rsp_msg { 2247 struct wcn36xx_hal_msg_header header; 2248 2249 /* Success or Failure */ 2250 u32 status; 2251 2252 /* BSS index that has been deleted */ 2253 u8 bss_index; 2254 2255 } __packed; 2256 2257 struct wcn36xx_hal_join_req_msg { 2258 struct wcn36xx_hal_msg_header header; 2259 2260 /* Indicates the BSSID to which STA is going to associate */ 2261 u8 bssid[ETH_ALEN]; 2262 2263 /* Indicates the channel to switch to. */ 2264 u8 channel; 2265 2266 /* Self STA MAC */ 2267 u8 self_sta_mac_addr[ETH_ALEN]; 2268 2269 /* Local power constraint */ 2270 u8 local_power_constraint; 2271 2272 /* Secondary channel offset */ 2273 enum phy_chan_bond_state secondary_channel_offset; 2274 2275 /* link State */ 2276 enum wcn36xx_hal_link_state link_state; 2277 2278 /* Max TX power */ 2279 s8 max_tx_power; 2280 } __packed; 2281 2282 struct wcn36xx_hal_join_rsp_msg { 2283 struct wcn36xx_hal_msg_header header; 2284 2285 /* success or failure */ 2286 u32 status; 2287 2288 /* HAL fills in the tx power used for mgmt frames in this field */ 2289 u8 tx_mgmt_power; 2290 } __packed; 2291 2292 struct post_assoc_req_msg { 2293 struct wcn36xx_hal_msg_header header; 2294 2295 struct wcn36xx_hal_config_sta_params sta_params; 2296 struct wcn36xx_hal_config_bss_params bss_params; 2297 }; 2298 2299 struct post_assoc_rsp_msg { 2300 struct wcn36xx_hal_msg_header header; 2301 struct config_sta_rsp_params sta_rsp_params; 2302 struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params; 2303 }; 2304 2305 /* This is used to create a set of WEP keys for a given BSS. */ 2306 struct wcn36xx_hal_set_bss_key_req_msg { 2307 struct wcn36xx_hal_msg_header header; 2308 2309 /* BSS Index of the BSS */ 2310 u8 bss_idx; 2311 2312 /* Encryption Type used with peer */ 2313 enum ani_ed_type enc_type; 2314 2315 /* Number of keys */ 2316 u8 num_keys; 2317 2318 /* Array of keys. */ 2319 struct wcn36xx_hal_keys keys[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS]; 2320 2321 /* Control for Replay Count, 1= Single TID based replay count on Tx 2322 * 0 = Per TID based replay count on TX */ 2323 u8 single_tid_rc; 2324 } __packed; 2325 2326 /* tagged version of set bss key */ 2327 struct wcn36xx_hal_set_bss_key_req_msg_tagged { 2328 struct wcn36xx_hal_set_bss_key_req_msg Msg; 2329 u32 tag; 2330 } __packed; 2331 2332 struct wcn36xx_hal_set_bss_key_rsp_msg { 2333 struct wcn36xx_hal_msg_header header; 2334 2335 /* success or failure */ 2336 u32 status; 2337 } __packed; 2338 2339 /* 2340 * This is used configure the key information on a given station. 2341 * When the sec_type is WEP40 or WEP104, the def_wep_idx is used to locate 2342 * a preconfigured key from a BSS the station associated with; otherwise 2343 * a new key descriptor is created based on the key field. 2344 */ 2345 struct wcn36xx_hal_set_sta_key_req_msg { 2346 struct wcn36xx_hal_msg_header header; 2347 struct wcn36xx_hal_set_sta_key_params set_sta_key_params; 2348 } __packed; 2349 2350 struct wcn36xx_hal_set_sta_key_rsp_msg { 2351 struct wcn36xx_hal_msg_header header; 2352 2353 /* success or failure */ 2354 u32 status; 2355 } __packed; 2356 2357 struct wcn36xx_hal_remove_bss_key_req_msg { 2358 struct wcn36xx_hal_msg_header header; 2359 2360 /* BSS Index of the BSS */ 2361 u8 bss_idx; 2362 2363 /* Encryption Type used with peer */ 2364 enum ani_ed_type enc_type; 2365 2366 /* Key Id */ 2367 u8 key_id; 2368 2369 /* STATIC/DYNAMIC. Used in Nullifying in Key Descriptors for 2370 * Static/Dynamic keys */ 2371 enum ani_wep_type wep_type; 2372 } __packed; 2373 2374 struct wcn36xx_hal_remove_bss_key_rsp_msg { 2375 struct wcn36xx_hal_msg_header header; 2376 2377 /* success or failure */ 2378 u32 status; 2379 } __packed; 2380 2381 /* 2382 * This is used by PE to Remove the key information on a given station. 2383 */ 2384 struct wcn36xx_hal_remove_sta_key_req_msg { 2385 struct wcn36xx_hal_msg_header header; 2386 2387 /* STA Index */ 2388 u16 sta_idx; 2389 2390 /* Encryption Type used with peer */ 2391 enum ani_ed_type enc_type; 2392 2393 /* Key Id */ 2394 u8 key_id; 2395 2396 /* Whether to invalidate the Broadcast key or Unicast key. In case 2397 * of WEP, the same key is used for both broadcast and unicast. */ 2398 u8 unicast; 2399 2400 } __packed; 2401 2402 struct wcn36xx_hal_remove_sta_key_rsp_msg { 2403 struct wcn36xx_hal_msg_header header; 2404 2405 /*success or failure */ 2406 u32 status; 2407 2408 } __packed; 2409 2410 #ifdef FEATURE_OEM_DATA_SUPPORT 2411 2412 #ifndef OEM_DATA_REQ_SIZE 2413 #define OEM_DATA_REQ_SIZE 134 2414 #endif 2415 2416 #ifndef OEM_DATA_RSP_SIZE 2417 #define OEM_DATA_RSP_SIZE 1968 2418 #endif 2419 2420 struct start_oem_data_req_msg { 2421 struct wcn36xx_hal_msg_header header; 2422 2423 u32 status; 2424 tSirMacAddr self_mac_addr; 2425 u8 oem_data_req[OEM_DATA_REQ_SIZE]; 2426 2427 }; 2428 2429 struct start_oem_data_rsp_msg { 2430 struct wcn36xx_hal_msg_header header; 2431 2432 u8 oem_data_rsp[OEM_DATA_RSP_SIZE]; 2433 }; 2434 2435 #endif 2436 2437 struct wcn36xx_hal_switch_channel_req_msg { 2438 struct wcn36xx_hal_msg_header header; 2439 2440 /* Channel number */ 2441 u8 channel_number; 2442 2443 /* Local power constraint */ 2444 u8 local_power_constraint; 2445 2446 /* Secondary channel offset */ 2447 enum phy_chan_bond_state secondary_channel_offset; 2448 2449 /* HAL fills in the tx power used for mgmt frames in this field. */ 2450 u8 tx_mgmt_power; 2451 2452 /* Max TX power */ 2453 u8 max_tx_power; 2454 2455 /* Self STA MAC */ 2456 u8 self_sta_mac_addr[ETH_ALEN]; 2457 2458 /* VO WIFI comment: BSSID needed to identify session. As the 2459 * request has power constraints, this should be applied only to 2460 * that session Since MTU timing and EDCA are sessionized, this 2461 * struct needs to be sessionized and bssid needs to be out of the 2462 * VOWifi feature flag V IMP: Keep bssId field at the end of this 2463 * msg. It is used to mantain backward compatbility by way of 2464 * ignoring if using new host/old FW or old host/new FW since it is 2465 * at the end of this struct 2466 */ 2467 u8 bssid[ETH_ALEN]; 2468 } __packed; 2469 2470 struct wcn36xx_hal_switch_channel_rsp_msg { 2471 struct wcn36xx_hal_msg_header header; 2472 2473 /* Status */ 2474 u32 status; 2475 2476 /* Channel number - same as in request */ 2477 u8 channel_number; 2478 2479 /* HAL fills in the tx power used for mgmt frames in this field */ 2480 u8 tx_mgmt_power; 2481 2482 /* BSSID needed to identify session - same as in request */ 2483 u8 bssid[ETH_ALEN]; 2484 2485 } __packed; 2486 2487 struct wcn36xx_hal_process_ptt_msg_req_msg { 2488 struct wcn36xx_hal_msg_header header; 2489 2490 /* Actual FTM Command body */ 2491 u8 ptt_msg[]; 2492 } __packed; 2493 2494 struct wcn36xx_hal_process_ptt_msg_rsp_msg { 2495 struct wcn36xx_hal_msg_header header; 2496 2497 /* FTM Command response status */ 2498 u32 ptt_msg_resp_status; 2499 /* Actual FTM Command body */ 2500 u8 ptt_msg[]; 2501 } __packed; 2502 2503 struct update_edca_params_req_msg { 2504 struct wcn36xx_hal_msg_header header; 2505 2506 /*BSS Index */ 2507 u16 bss_index; 2508 2509 /* Best Effort */ 2510 struct wcn36xx_hal_edca_param_record acbe; 2511 2512 /* Background */ 2513 struct wcn36xx_hal_edca_param_record acbk; 2514 2515 /* Video */ 2516 struct wcn36xx_hal_edca_param_record acvi; 2517 2518 /* Voice */ 2519 struct wcn36xx_hal_edca_param_record acvo; 2520 }; 2521 2522 struct update_edca_params_rsp_msg { 2523 struct wcn36xx_hal_msg_header header; 2524 2525 /* success or failure */ 2526 u32 status; 2527 }; 2528 2529 struct dpu_stats_params { 2530 /* Index of STA to which the statistics */ 2531 u16 sta_index; 2532 2533 /* Encryption mode */ 2534 u8 enc_mode; 2535 2536 /* status */ 2537 u32 status; 2538 2539 /* Statistics */ 2540 u32 send_blocks; 2541 u32 recv_blocks; 2542 u32 replays; 2543 u8 mic_error_cnt; 2544 u32 prot_excl_cnt; 2545 u16 format_err_cnt; 2546 u16 un_decryptable_cnt; 2547 u32 decrypt_err_cnt; 2548 u32 decrypt_ok_cnt; 2549 }; 2550 2551 struct wcn36xx_hal_stats_req_msg { 2552 struct wcn36xx_hal_msg_header header; 2553 2554 /* Valid STA Idx for per STA stats request */ 2555 u32 sta_id; 2556 2557 /* Categories of stats requested as specified in eHalStatsMask */ 2558 u32 stats_mask; 2559 }; 2560 2561 struct ani_summary_stats_info { 2562 /* Total number of packets(per AC) that were successfully 2563 * transmitted with retries */ 2564 u32 retry_cnt[4]; 2565 2566 /* The number of MSDU packets and MMPDU frames per AC that the 2567 * 802.11 station successfully transmitted after more than one 2568 * retransmission attempt */ 2569 u32 multiple_retry_cnt[4]; 2570 2571 /* Total number of packets(per AC) that were successfully 2572 * transmitted (with and without retries, including multi-cast, 2573 * broadcast) */ 2574 u32 tx_frm_cnt[4]; 2575 2576 /* Total number of packets that were successfully received (after 2577 * appropriate filter rules including multi-cast, broadcast) */ 2578 u32 rx_frm_cnt; 2579 2580 /* Total number of duplicate frames received successfully */ 2581 u32 frm_dup_cnt; 2582 2583 /* Total number packets(per AC) failed to transmit */ 2584 u32 fail_cnt[4]; 2585 2586 /* Total number of RTS/CTS sequence failures for transmission of a 2587 * packet */ 2588 u32 rts_fail_cnt; 2589 2590 /* Total number packets failed transmit because of no ACK from the 2591 * remote entity */ 2592 u32 ack_fail_cnt; 2593 2594 /* Total number of RTS/CTS sequence success for transmission of a 2595 * packet */ 2596 u32 rts_succ_cnt; 2597 2598 /* The sum of the receive error count and dropped-receive-buffer 2599 * error count. HAL will provide this as a sum of (FCS error) + 2600 * (Fail get BD/PDU in HW) */ 2601 u32 rx_discard_cnt; 2602 2603 /* 2604 * The receive error count. HAL will provide the RxP FCS error 2605 * global counter. */ 2606 u32 rx_error_cnt; 2607 2608 /* The sum of the transmit-directed byte count, transmit-multicast 2609 * byte count and transmit-broadcast byte count. HAL will sum TPE 2610 * UC/MC/BCAST global counters to provide this. */ 2611 u32 tx_byte_cnt; 2612 }; 2613 2614 /* defines tx_rate_flags */ 2615 enum tx_rate_info { 2616 /* Legacy rates */ 2617 HAL_TX_RATE_LEGACY = 0x1, 2618 2619 /* HT20 rates */ 2620 HAL_TX_RATE_HT20 = 0x2, 2621 2622 /* HT40 rates */ 2623 HAL_TX_RATE_HT40 = 0x4, 2624 2625 /* Rate with Short guard interval */ 2626 HAL_TX_RATE_SGI = 0x8, 2627 2628 /* Rate with Long guard interval */ 2629 HAL_TX_RATE_LGI = 0x10, 2630 2631 /* VHT rates */ 2632 HAL_TX_RATE_VHT20 = 0x20, 2633 HAL_TX_RATE_VHT40 = 0x40, 2634 HAL_TX_RATE_VHT80 = 0x80, 2635 }; 2636 2637 struct ani_global_class_a_stats_info { 2638 /* The number of MPDU frames received by the 802.11 station for 2639 * MSDU packets or MMPDU frames */ 2640 u32 rx_frag_cnt; 2641 2642 /* The number of MPDU frames received by the 802.11 station for 2643 * MSDU packets or MMPDU frames when a promiscuous packet filter 2644 * was enabled */ 2645 u32 promiscuous_rx_frag_cnt; 2646 2647 /* The receiver input sensitivity referenced to a FER of 8% at an 2648 * MPDU length of 1024 bytes at the antenna connector. Each element 2649 * of the array shall correspond to a supported rate and the order 2650 * shall be the same as the supporteRates parameter. */ 2651 u32 rx_input_sensitivity; 2652 2653 /* The maximum transmit power in dBm upto one decimal. for eg: if 2654 * it is 10.5dBm, the value would be 105 */ 2655 u32 max_pwr; 2656 2657 /* Number of times the receiver failed to synchronize with the 2658 * incoming signal after detecting the sync in the preamble of the 2659 * transmitted PLCP protocol data unit. */ 2660 u32 sync_fail_cnt; 2661 2662 /* Legacy transmit rate, in units of 500 kbit/sec, for the most 2663 * recently transmitted frame */ 2664 u32 tx_rate; 2665 2666 /* mcs index for HT20 and HT40 rates */ 2667 u32 mcs_index; 2668 2669 /* to differentiate between HT20 and HT40 rates; short and long 2670 * guard interval */ 2671 u32 tx_rate_flags; 2672 }; 2673 2674 struct ani_global_security_stats { 2675 /* The number of unencrypted received MPDU frames that the MAC 2676 * layer discarded when the IEEE 802.11 dot11ExcludeUnencrypted 2677 * management information base (MIB) object is enabled */ 2678 u32 rx_wep_unencrypted_frm_cnt; 2679 2680 /* The number of received MSDU packets that that the 802.11 station 2681 * discarded because of MIC failures */ 2682 u32 rx_mic_fail_cnt; 2683 2684 /* The number of encrypted MPDU frames that the 802.11 station 2685 * failed to decrypt because of a TKIP ICV error */ 2686 u32 tkip_icv_err; 2687 2688 /* The number of received MPDU frames that the 802.11 discarded 2689 * because of an invalid AES-CCMP format */ 2690 u32 aes_ccmp_format_err; 2691 2692 /* The number of received MPDU frames that the 802.11 station 2693 * discarded because of the AES-CCMP replay protection procedure */ 2694 u32 aes_ccmp_replay_cnt; 2695 2696 /* The number of received MPDU frames that the 802.11 station 2697 * discarded because of errors detected by the AES-CCMP decryption 2698 * algorithm */ 2699 u32 aes_ccmp_decrpt_err; 2700 2701 /* The number of encrypted MPDU frames received for which a WEP 2702 * decryption key was not available on the 802.11 station */ 2703 u32 wep_undecryptable_cnt; 2704 2705 /* The number of encrypted MPDU frames that the 802.11 station 2706 * failed to decrypt because of a WEP ICV error */ 2707 u32 wep_icv_err; 2708 2709 /* The number of received encrypted packets that the 802.11 station 2710 * successfully decrypted */ 2711 u32 rx_decrypt_succ_cnt; 2712 2713 /* The number of encrypted packets that the 802.11 station failed 2714 * to decrypt */ 2715 u32 rx_decrypt_fail_cnt; 2716 }; 2717 2718 struct ani_global_class_b_stats_info { 2719 struct ani_global_security_stats uc_stats; 2720 struct ani_global_security_stats mc_bc_stats; 2721 }; 2722 2723 struct ani_global_class_c_stats_info { 2724 /* This counter shall be incremented for a received A-MSDU frame 2725 * with the stations MAC address in the address 1 field or an 2726 * A-MSDU frame with a group address in the address 1 field */ 2727 u32 rx_amsdu_cnt; 2728 2729 /* This counter shall be incremented when the MAC receives an AMPDU 2730 * from the PHY */ 2731 u32 rx_ampdu_cnt; 2732 2733 /* This counter shall be incremented when a Frame is transmitted 2734 * only on the primary channel */ 2735 u32 tx_20_frm_cnt; 2736 2737 /* This counter shall be incremented when a Frame is received only 2738 * on the primary channel */ 2739 u32 rx_20_frm_cnt; 2740 2741 /* This counter shall be incremented by the number of MPDUs 2742 * received in the A-MPDU when an A-MPDU is received */ 2743 u32 rx_mpdu_in_ampdu_cnt; 2744 2745 /* This counter shall be incremented when an MPDU delimiter has a 2746 * CRC error when this is the first CRC error in the received AMPDU 2747 * or when the previous delimiter has been decoded correctly */ 2748 u32 ampdu_delimiter_crc_err; 2749 }; 2750 2751 struct ani_per_sta_stats_info { 2752 /* The number of MPDU frames that the 802.11 station transmitted 2753 * and acknowledged through a received 802.11 ACK frame */ 2754 u32 tx_frag_cnt[4]; 2755 2756 /* This counter shall be incremented when an A-MPDU is transmitted */ 2757 u32 tx_ampdu_cnt; 2758 2759 /* This counter shall increment by the number of MPDUs in the AMPDU 2760 * when an A-MPDU is transmitted */ 2761 u32 tx_mpdu_in_ampdu_cnt; 2762 }; 2763 2764 struct wcn36xx_hal_stats_rsp_msg { 2765 struct wcn36xx_hal_msg_header header; 2766 2767 /* Success or Failure */ 2768 u32 status; 2769 2770 /* STA Idx */ 2771 u32 sta_index; 2772 2773 /* Categories of STATS being returned as per eHalStatsMask */ 2774 u32 stats_mask; 2775 2776 /* message type is same as the request type */ 2777 u16 msg_type; 2778 2779 /* length of the entire request, includes the pStatsBuf length too */ 2780 u16 msg_len; 2781 }; 2782 2783 struct wcn36xx_hal_set_link_state_req_msg { 2784 struct wcn36xx_hal_msg_header header; 2785 2786 u8 bssid[ETH_ALEN]; 2787 enum wcn36xx_hal_link_state state; 2788 u8 self_mac_addr[ETH_ALEN]; 2789 2790 } __packed; 2791 2792 struct set_link_state_rsp_msg { 2793 struct wcn36xx_hal_msg_header header; 2794 2795 /* success or failure */ 2796 u32 status; 2797 }; 2798 2799 /* TSPEC Params */ 2800 struct wcn36xx_hal_ts_info_tfc { 2801 #ifndef ANI_LITTLE_BIT_ENDIAN 2802 u16 ackPolicy:2; 2803 u16 userPrio:3; 2804 u16 psb:1; 2805 u16 aggregation:1; 2806 u16 accessPolicy:2; 2807 u16 direction:2; 2808 u16 tsid:4; 2809 u16 trafficType:1; 2810 #else 2811 u16 trafficType:1; 2812 u16 tsid:4; 2813 u16 direction:2; 2814 u16 accessPolicy:2; 2815 u16 aggregation:1; 2816 u16 psb:1; 2817 u16 userPrio:3; 2818 u16 ackPolicy:2; 2819 #endif 2820 }; 2821 2822 /* Flag to schedule the traffic type */ 2823 struct wcn36xx_hal_ts_info_sch { 2824 #ifndef ANI_LITTLE_BIT_ENDIAN 2825 u8 rsvd:7; 2826 u8 schedule:1; 2827 #else 2828 u8 schedule:1; 2829 u8 rsvd:7; 2830 #endif 2831 }; 2832 2833 /* Traffic and scheduling info */ 2834 struct wcn36xx_hal_ts_info { 2835 struct wcn36xx_hal_ts_info_tfc traffic; 2836 struct wcn36xx_hal_ts_info_sch schedule; 2837 }; 2838 2839 /* Information elements */ 2840 struct wcn36xx_hal_tspec_ie { 2841 u8 type; 2842 u8 length; 2843 struct wcn36xx_hal_ts_info ts_info; 2844 u16 nom_msdu_size; 2845 u16 max_msdu_size; 2846 u32 min_svc_interval; 2847 u32 max_svc_interval; 2848 u32 inact_interval; 2849 u32 suspend_interval; 2850 u32 svc_start_time; 2851 u32 min_data_rate; 2852 u32 mean_data_rate; 2853 u32 peak_data_rate; 2854 u32 max_burst_sz; 2855 u32 delay_bound; 2856 u32 min_phy_rate; 2857 u16 surplus_bw; 2858 u16 medium_time; 2859 }; 2860 2861 struct add_ts_req_msg { 2862 struct wcn36xx_hal_msg_header header; 2863 2864 /* Station Index */ 2865 u16 sta_index; 2866 2867 /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS */ 2868 u16 tspec_index; 2869 2870 /* To program TPE with required parameters */ 2871 struct wcn36xx_hal_tspec_ie tspec; 2872 2873 /* U-APSD Flags: 1b per AC. Encoded as follows: 2874 b7 b6 b5 b4 b3 b2 b1 b0 = 2875 X X X X BE BK VI VO */ 2876 u8 uapsd; 2877 2878 /* These parameters are for all the access categories */ 2879 2880 /* Service Interval */ 2881 u32 service_interval[WCN36XX_HAL_MAX_AC]; 2882 2883 /* Suspend Interval */ 2884 u32 suspend_interval[WCN36XX_HAL_MAX_AC]; 2885 2886 /* Delay Interval */ 2887 u32 delay_interval[WCN36XX_HAL_MAX_AC]; 2888 }; 2889 2890 struct add_rs_rsp_msg { 2891 struct wcn36xx_hal_msg_header header; 2892 2893 /* success or failure */ 2894 u32 status; 2895 }; 2896 2897 struct del_ts_req_msg { 2898 struct wcn36xx_hal_msg_header header; 2899 2900 /* Station Index */ 2901 u16 sta_index; 2902 2903 /* TSPEC identifier uniquely identifying a TSPEC for a STA in a BSS */ 2904 u16 tspec_index; 2905 2906 /* To lookup station id using the mac address */ 2907 u8 bssid[ETH_ALEN]; 2908 }; 2909 2910 struct del_ts_rsp_msg { 2911 struct wcn36xx_hal_msg_header header; 2912 2913 /* success or failure */ 2914 u32 status; 2915 }; 2916 2917 /* End of TSpec Parameters */ 2918 2919 /* Start of BLOCK ACK related Parameters */ 2920 2921 struct wcn36xx_hal_add_ba_session_req_msg { 2922 struct wcn36xx_hal_msg_header header; 2923 2924 /* Station Index */ 2925 u16 sta_index; 2926 2927 /* Peer MAC Address */ 2928 u8 mac_addr[ETH_ALEN]; 2929 2930 /* ADDBA Action Frame dialog token 2931 HAL will not interpret this object */ 2932 u8 dialog_token; 2933 2934 /* TID for which the BA is being setup 2935 This identifies the TC or TS of interest */ 2936 u8 tid; 2937 2938 /* 0 - Delayed BA (Not supported) 2939 1 - Immediate BA */ 2940 u8 policy; 2941 2942 /* Indicates the number of buffers for this TID (baTID) 2943 NOTE - This is the requested buffer size. When this 2944 is processed by HAL and subsequently by HDD, it is 2945 possible that HDD may change this buffer size. Any 2946 change in the buffer size should be noted by PE and 2947 advertized appropriately in the ADDBA response */ 2948 u16 buffer_size; 2949 2950 /* BA timeout in TU's 0 means no timeout will occur */ 2951 u16 timeout; 2952 2953 /* b0..b3 - Fragment Number - Always set to 0 2954 b4..b15 - Starting Sequence Number of first MSDU 2955 for which this BA is setup */ 2956 u16 ssn; 2957 2958 /* ADDBA direction 2959 1 - Originator 2960 0 - Recipient */ 2961 u8 direction; 2962 } __packed; 2963 2964 struct wcn36xx_hal_add_ba_session_rsp_msg { 2965 struct wcn36xx_hal_msg_header header; 2966 2967 /* success or failure */ 2968 u32 status; 2969 2970 /* Dialog token */ 2971 u8 dialog_token; 2972 2973 /* TID for which the BA session has been setup */ 2974 u8 ba_tid; 2975 2976 /* BA Buffer Size allocated for the current BA session */ 2977 u8 ba_buffer_size; 2978 2979 u8 ba_session_id; 2980 2981 /* Reordering Window buffer */ 2982 u8 win_size; 2983 2984 /* Station Index to id the sta */ 2985 u8 sta_index; 2986 2987 /* Starting Sequence Number */ 2988 u16 ssn; 2989 } __packed; 2990 2991 struct wcn36xx_hal_add_ba_req_msg { 2992 struct wcn36xx_hal_msg_header header; 2993 2994 /* Session Id */ 2995 u8 session_id; 2996 2997 /* Reorder Window Size */ 2998 u8 win_size; 2999 /* Old FW 1.2.2.4 does not support this*/ 3000 #ifdef FEATURE_ON_CHIP_REORDERING 3001 u8 reordering_done_on_chip; 3002 #endif 3003 } __packed; 3004 3005 struct wcn36xx_hal_add_ba_rsp_msg { 3006 struct wcn36xx_hal_msg_header header; 3007 3008 /* success or failure */ 3009 u32 status; 3010 3011 /* Dialog token */ 3012 u8 dialog_token; 3013 } __packed; 3014 3015 struct add_ba_info { 3016 u16 ba_enable:1; 3017 u16 starting_seq_num:12; 3018 u16 reserved:3; 3019 }; 3020 3021 struct wcn36xx_hal_trigger_ba_rsp_candidate { 3022 u8 sta_addr[ETH_ALEN]; 3023 struct add_ba_info ba_info[STACFG_MAX_TC]; 3024 } __packed; 3025 3026 struct wcn36xx_hal_trigger_ba_req_candidate { 3027 u8 sta_index; 3028 u8 tid_bitmap; 3029 } __packed; 3030 3031 struct wcn36xx_hal_trigger_ba_req_msg { 3032 struct wcn36xx_hal_msg_header header; 3033 3034 /* Session Id */ 3035 u8 session_id; 3036 3037 /* baCandidateCnt is followed by trigger BA 3038 * Candidate List(tTriggerBaCandidate) 3039 */ 3040 u16 candidate_cnt; 3041 3042 } __packed; 3043 3044 struct wcn36xx_hal_trigger_ba_rsp_msg { 3045 struct wcn36xx_hal_msg_header header; 3046 3047 /* TO SUPPORT BT-AMP */ 3048 u8 bssid[ETH_ALEN]; 3049 3050 /* success or failure */ 3051 u32 status; 3052 3053 /* baCandidateCnt is followed by trigger BA 3054 * Rsp Candidate List(tTriggerRspBaCandidate) 3055 */ 3056 u16 candidate_cnt; 3057 } __packed; 3058 3059 struct wcn36xx_hal_del_ba_req_msg { 3060 struct wcn36xx_hal_msg_header header; 3061 3062 /* Station Index */ 3063 u16 sta_index; 3064 3065 /* TID for which the BA session is being deleted */ 3066 u8 tid; 3067 3068 /* DELBA direction 3069 1 - Originator 3070 0 - Recipient */ 3071 u8 direction; 3072 } __packed; 3073 3074 struct wcn36xx_hal_del_ba_rsp_msg { 3075 struct wcn36xx_hal_msg_header header; 3076 3077 /* success or failure */ 3078 u32 status; 3079 } __packed; 3080 3081 struct tsm_stats_req_msg { 3082 struct wcn36xx_hal_msg_header header; 3083 3084 /* Traffic Id */ 3085 u8 tid; 3086 3087 u8 bssid[ETH_ALEN]; 3088 }; 3089 3090 struct tsm_stats_rsp_msg { 3091 struct wcn36xx_hal_msg_header header; 3092 3093 /*success or failure */ 3094 u32 status; 3095 3096 /* Uplink Packet Queue delay */ 3097 u16 uplink_pkt_queue_delay; 3098 3099 /* Uplink Packet Queue delay histogram */ 3100 u16 uplink_pkt_queue_delay_hist[4]; 3101 3102 /* Uplink Packet Transmit delay */ 3103 u32 uplink_pkt_tx_delay; 3104 3105 /* Uplink Packet loss */ 3106 u16 uplink_pkt_loss; 3107 3108 /* Uplink Packet count */ 3109 u16 uplink_pkt_count; 3110 3111 /* Roaming count */ 3112 u8 roaming_count; 3113 3114 /* Roaming Delay */ 3115 u16 roaming_delay; 3116 }; 3117 3118 struct set_key_done_msg { 3119 struct wcn36xx_hal_msg_header header; 3120 3121 /*bssid of the keys */ 3122 u8 bssidx; 3123 u8 enc_type; 3124 }; 3125 3126 struct wcn36xx_hal_nv_img_download_req_msg { 3127 /* Note: The length specified in wcn36xx_hal_nv_img_download_req_msg 3128 * messages should be 3129 * header.len = sizeof(wcn36xx_hal_nv_img_download_req_msg) + 3130 * nv_img_buffer_size */ 3131 struct wcn36xx_hal_msg_header header; 3132 3133 /* Fragment sequence number of the NV Image. Note that NV Image 3134 * might not fit into one message due to size limitation of the SMD 3135 * channel FIFO. UMAC can hence choose to chop the NV blob into 3136 * multiple fragments starting with seqeunce number 0, 1, 2 etc. 3137 * The last fragment MUST be indicated by marking the 3138 * isLastFragment field to 1. Note that all the NV blobs would be 3139 * concatenated together by HAL without any padding bytes in 3140 * between.*/ 3141 u16 frag_number; 3142 3143 /* Is this the last fragment? When set to 1 it indicates that no 3144 * more fragments will be sent by UMAC and HAL can concatenate all 3145 * the NV blobs rcvd & proceed with the parsing. HAL would generate 3146 * a WCN36XX_HAL_DOWNLOAD_NV_RSP to the WCN36XX_HAL_DOWNLOAD_NV_REQ 3147 * after it receives each fragment */ 3148 u16 last_fragment; 3149 3150 /* NV Image size (number of bytes) */ 3151 u32 nv_img_buffer_size; 3152 3153 /* Following the 'nv_img_buffer_size', there should be 3154 * nv_img_buffer_size bytes of NV Image i.e. 3155 * u8[nv_img_buffer_size] */ 3156 } __packed; 3157 3158 struct wcn36xx_hal_nv_img_download_rsp_msg { 3159 struct wcn36xx_hal_msg_header header; 3160 3161 /* Success or Failure. HAL would generate a 3162 * WCN36XX_HAL_DOWNLOAD_NV_RSP after each fragment */ 3163 u32 status; 3164 } __packed; 3165 3166 struct wcn36xx_hal_nv_store_ind { 3167 /* Note: The length specified in tHalNvStoreInd messages should be 3168 * header.msgLen = sizeof(tHalNvStoreInd) + nvBlobSize */ 3169 struct wcn36xx_hal_msg_header header; 3170 3171 /* NV Item */ 3172 u32 table_id; 3173 3174 /* Size of NV Blob */ 3175 u32 nv_blob_size; 3176 3177 /* Following the 'nvBlobSize', there should be nvBlobSize bytes of 3178 * NV blob i.e. u8[nvBlobSize] */ 3179 }; 3180 3181 /* End of Block Ack Related Parameters */ 3182 3183 #define WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE 6 3184 3185 /* Definition for MIC failure indication MAC reports this each time a MIC 3186 * failure occures on Rx TKIP packet 3187 */ 3188 struct mic_failure_ind_msg { 3189 struct wcn36xx_hal_msg_header header; 3190 3191 u8 bssid[ETH_ALEN]; 3192 3193 /* address used to compute MIC */ 3194 u8 src_addr[ETH_ALEN]; 3195 3196 /* transmitter address */ 3197 u8 ta_addr[ETH_ALEN]; 3198 3199 u8 dst_addr[ETH_ALEN]; 3200 3201 u8 multicast; 3202 3203 /* first byte of IV */ 3204 u8 iv1; 3205 3206 /* second byte of IV */ 3207 u8 key_id; 3208 3209 /* sequence number */ 3210 u8 tsc[WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE]; 3211 3212 /* receive address */ 3213 u8 rx_addr[ETH_ALEN]; 3214 }; 3215 3216 struct update_vht_op_mode_req_msg { 3217 struct wcn36xx_hal_msg_header header; 3218 3219 u16 op_mode; 3220 u16 sta_id; 3221 }; 3222 3223 struct update_vht_op_mode_params_rsp_msg { 3224 struct wcn36xx_hal_msg_header header; 3225 3226 u32 status; 3227 }; 3228 3229 struct update_beacon_req_msg { 3230 struct wcn36xx_hal_msg_header header; 3231 3232 u8 bss_index; 3233 3234 /* shortPreamble mode. HAL should update all the STA rates when it 3235 * receives this message */ 3236 u8 short_preamble; 3237 3238 /* short Slot time. */ 3239 u8 short_slot_time; 3240 3241 /* Beacon Interval */ 3242 u16 beacon_interval; 3243 3244 /* Protection related */ 3245 u8 lla_coexist; 3246 u8 llb_coexist; 3247 u8 llg_coexist; 3248 u8 ht20_coexist; 3249 u8 lln_non_gf_coexist; 3250 u8 lsig_tx_op_protection_full_support; 3251 u8 rifs_mode; 3252 3253 u16 param_change_bitmap; 3254 }; 3255 3256 struct update_beacon_rsp_msg { 3257 struct wcn36xx_hal_msg_header header; 3258 u32 status; 3259 }; 3260 3261 struct wcn36xx_hal_send_beacon_req_msg { 3262 struct wcn36xx_hal_msg_header header; 3263 3264 /* length of the template + 6. Only qcom knows why */ 3265 u32 beacon_length6; 3266 3267 /* length of the template. */ 3268 u32 beacon_length; 3269 3270 /* Beacon data. */ 3271 u8 beacon[BEACON_TEMPLATE_SIZE - sizeof(u32)]; 3272 3273 u8 bssid[ETH_ALEN]; 3274 3275 /* TIM IE offset from the beginning of the template. */ 3276 u32 tim_ie_offset; 3277 3278 /* P2P IE offset from the begining of the template */ 3279 u16 p2p_ie_offset; 3280 } __packed; 3281 3282 struct send_beacon_rsp_msg { 3283 struct wcn36xx_hal_msg_header header; 3284 u32 status; 3285 } __packed; 3286 3287 struct enable_radar_req_msg { 3288 struct wcn36xx_hal_msg_header header; 3289 3290 u8 bssid[ETH_ALEN]; 3291 u8 channel; 3292 }; 3293 3294 struct enable_radar_rsp_msg { 3295 struct wcn36xx_hal_msg_header header; 3296 3297 /* Link Parameters */ 3298 u8 bssid[ETH_ALEN]; 3299 3300 /* success or failure */ 3301 u32 status; 3302 }; 3303 3304 struct radar_detect_intr_ind_msg { 3305 struct wcn36xx_hal_msg_header header; 3306 3307 u8 radar_det_channel; 3308 }; 3309 3310 struct radar_detect_ind_msg { 3311 struct wcn36xx_hal_msg_header header; 3312 3313 /* channel number in which the RADAR detected */ 3314 u8 channel_number; 3315 3316 /* RADAR pulse width in usecond */ 3317 u16 radar_pulse_width; 3318 3319 /* Number of RADAR pulses */ 3320 u16 num_radar_pulse; 3321 }; 3322 3323 struct wcn36xx_hal_get_tpc_report_req_msg { 3324 struct wcn36xx_hal_msg_header header; 3325 3326 u8 sta[ETH_ALEN]; 3327 u8 dialog_token; 3328 u8 txpower; 3329 }; 3330 3331 struct wcn36xx_hal_get_tpc_report_rsp_msg { 3332 struct wcn36xx_hal_msg_header header; 3333 3334 /* success or failure */ 3335 u32 status; 3336 }; 3337 3338 struct wcn36xx_hal_send_probe_resp_req_msg { 3339 struct wcn36xx_hal_msg_header header; 3340 3341 u8 probe_resp_template[BEACON_TEMPLATE_SIZE]; 3342 u32 probe_resp_template_len; 3343 u32 proxy_probe_req_valid_ie_bmap[8]; 3344 u8 bssid[ETH_ALEN]; 3345 }; 3346 3347 struct send_probe_resp_rsp_msg { 3348 struct wcn36xx_hal_msg_header header; 3349 3350 /* success or failure */ 3351 u32 status; 3352 }; 3353 3354 struct send_unknown_frame_rx_ind_msg { 3355 struct wcn36xx_hal_msg_header header; 3356 3357 /* success or failure */ 3358 u32 status; 3359 }; 3360 3361 struct wcn36xx_hal_delete_sta_context_ind_msg { 3362 struct wcn36xx_hal_msg_header header; 3363 3364 u16 aid; 3365 u16 sta_id; 3366 3367 /* TO SUPPORT BT-AMP */ 3368 u8 bssid[ETH_ALEN]; 3369 3370 /* HAL copies bssid from the sta table. */ 3371 u8 addr2[ETH_ALEN]; 3372 3373 /* To unify the keepalive / unknown A2 / tim-based disa */ 3374 u16 reason_code; 3375 } __packed; 3376 3377 struct indicate_del_sta { 3378 struct wcn36xx_hal_msg_header header; 3379 u8 aid; 3380 u8 sta_index; 3381 u8 bss_index; 3382 u8 reason_code; 3383 u32 status; 3384 }; 3385 3386 struct bt_amp_event_msg { 3387 struct wcn36xx_hal_msg_header header; 3388 3389 enum bt_amp_event_type btAmpEventType; 3390 }; 3391 3392 struct bt_amp_event_rsp { 3393 struct wcn36xx_hal_msg_header header; 3394 3395 /* success or failure */ 3396 u32 status; 3397 }; 3398 3399 struct tl_hal_flush_ac_req_msg { 3400 struct wcn36xx_hal_msg_header header; 3401 3402 /* Station Index. originates from HAL */ 3403 u8 sta_id; 3404 3405 /* TID for which the transmit queue is being flushed */ 3406 u8 tid; 3407 }; 3408 3409 struct tl_hal_flush_ac_rsp_msg { 3410 struct wcn36xx_hal_msg_header header; 3411 3412 /* Station Index. originates from HAL */ 3413 u8 sta_id; 3414 3415 /* TID for which the transmit queue is being flushed */ 3416 u8 tid; 3417 3418 /* success or failure */ 3419 u32 status; 3420 }; 3421 3422 struct wcn36xx_hal_enter_imps_req_msg { 3423 struct wcn36xx_hal_msg_header header; 3424 } __packed; 3425 3426 struct wcn36xx_hal_exit_imps_req_msg { 3427 struct wcn36xx_hal_msg_header header; 3428 } __packed; 3429 3430 struct wcn36xx_hal_enter_bmps_req_msg { 3431 struct wcn36xx_hal_msg_header header; 3432 3433 u8 bss_index; 3434 3435 /* TBTT value derived from the last beacon */ 3436 #ifndef BUILD_QWPTTSTATIC 3437 u64 tbtt; 3438 #endif 3439 u8 dtim_count; 3440 3441 /* DTIM period given to HAL during association may not be valid, if 3442 * association is based on ProbeRsp instead of beacon. */ 3443 u8 dtim_period; 3444 3445 /* For CCX and 11R Roaming */ 3446 u32 rssi_filter_period; 3447 3448 u32 num_beacon_per_rssi_average; 3449 u8 rssi_filter_enable; 3450 } __packed; 3451 3452 struct wcn36xx_hal_exit_bmps_req_msg { 3453 struct wcn36xx_hal_msg_header header; 3454 3455 u8 send_data_null; 3456 u8 bss_index; 3457 } __packed; 3458 3459 struct wcn36xx_hal_missed_beacon_ind_msg { 3460 struct wcn36xx_hal_msg_header header; 3461 3462 u8 bss_index; 3463 } __packed; 3464 3465 /* Beacon Filtering data structures */ 3466 3467 struct beacon_filter_ie { 3468 u8 element_id; 3469 u8 check_ie_presence; 3470 u8 offset; 3471 u8 value; 3472 u8 bitmask; 3473 u8 ref; 3474 } __packed; 3475 3476 #define WCN36XX_FILTER_CAPABILITY_MASK 0x73cf 3477 #define WCN36XX_FILTER_IE_DS_CHANNEL_MASK 0x00 3478 #define WCN36XX_FILTER_IE_ERP_FILTER_MASK 0xF8 3479 #define WCN36XX_FILTER_IE_EDCA_FILTER_MASK 0xF0 3480 #define WCN36XX_FILTER_IE_QOS_FILTER_MASK 0xF0 3481 #define WCN36XX_FILTER_IE_CHANNEL_SWITCH_MASK 0x00 3482 #define WCN36XX_FILTER_IE_HT_BYTE0_FILTER_MASK 0x00 3483 #define WCN36XX_FILTER_IE_HT_BYTE1_FILTER_MASK 0xF8 3484 #define WCN36XX_FILTER_IE_HT_BYTE2_FILTER_MASK 0xEB 3485 #define WCN36XX_FILTER_IE_HT_BYTE5_FILTER_MASK 0xFD 3486 #define WCN36XX_FILTER_IE_PWR_CONSTRAINT_MASK 0x00 3487 #define WCN36XX_FILTER_IE_OPMODE_NOTIF_MASK 0x00 3488 #define WCN36XX_FILTER_IE_VHTOP_CHWIDTH_MASK 0xFC 3489 #define WCN36XX_FILTER_IE_RSN_MASK 0x00 3490 #define WCN36XX_FILTER_IE_VENDOR_MASK 0x00 3491 3492 /* The above structure would be followed by multiple of below mentioned 3493 * structure 3494 */ 3495 3496 struct wcn36xx_hal_add_bcn_filter_req_msg { 3497 struct wcn36xx_hal_msg_header header; 3498 3499 u16 capability_info; 3500 u16 capability_mask; 3501 u16 beacon_interval; 3502 u16 ie_num; 3503 u8 bss_index; 3504 u8 reserved; 3505 } __packed; 3506 3507 struct wcn36xx_hal_rem_bcn_filter_req { 3508 struct wcn36xx_hal_msg_header header; 3509 3510 u8 ie_Count; 3511 u8 rem_ie_id[1]; 3512 } __packed; 3513 3514 #define WCN36XX_HAL_IPV4_ARP_REPLY_OFFLOAD 0 3515 #define WCN36XX_HAL_IPV6_NEIGHBOR_DISCOVERY_OFFLOAD 1 3516 #define WCN36XX_HAL_IPV6_NS_OFFLOAD 2 3517 #define WCN36XX_HAL_IPV6_ADDR_LEN 16 3518 #define WCN36XX_HAL_OFFLOAD_DISABLE 0 3519 #define WCN36XX_HAL_OFFLOAD_ENABLE 1 3520 #define WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE 0x2 3521 #define WCN36XX_HAL_OFFLOAD_MCAST_FILTER_ENABLE 0x4 3522 #define WCN36XX_HAL_OFFLOAD_NS_AND_MCAST_FILTER_ENABLE \ 3523 (WCN36XX_HAL_OFFLOAD_ENABLE | WCN36XX_HAL_OFFLOAD_MCAST_FILTER_ENABLE) 3524 #define WCN36XX_HAL_OFFLOAD_ARP_AND_BCAST_FILTER_ENABLE \ 3525 (WCN36XX_HAL_OFFLOAD_ENABLE | WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE) 3526 #define WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX 0x02 3527 3528 struct wcn36xx_hal_ns_offload_params { 3529 u8 src_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; 3530 u8 self_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; 3531 3532 /* Only support 2 possible Network Advertisement IPv6 address */ 3533 u8 target_ipv6_addr1[WCN36XX_HAL_IPV6_ADDR_LEN]; 3534 u8 target_ipv6_addr2[WCN36XX_HAL_IPV6_ADDR_LEN]; 3535 3536 u8 self_addr[ETH_ALEN]; 3537 u8 src_ipv6_addr_valid:1; 3538 u8 target_ipv6_addr1_valid:1; 3539 u8 target_ipv6_addr2_valid:1; 3540 u8 reserved1:5; 3541 3542 /* make it DWORD aligned */ 3543 u8 reserved2; 3544 3545 /* slot index for this offload */ 3546 u32 slot_index; 3547 u8 bss_index; 3548 } __packed; 3549 3550 struct wcn36xx_hal_host_offload_req { 3551 u8 offload_type; 3552 3553 /* enable or disable */ 3554 u8 enable; 3555 3556 union { 3557 u8 host_ipv4_addr[4]; 3558 u8 host_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; 3559 } u; 3560 } __packed; 3561 3562 struct wcn36xx_hal_host_offload_req_msg { 3563 struct wcn36xx_hal_msg_header header; 3564 struct wcn36xx_hal_host_offload_req host_offload_params; 3565 struct wcn36xx_hal_ns_offload_params ns_offload_params; 3566 } __packed; 3567 3568 /* Packet Types. */ 3569 #define WCN36XX_HAL_KEEP_ALIVE_NULL_PKT 1 3570 #define WCN36XX_HAL_KEEP_ALIVE_UNSOLICIT_ARP_RSP 2 3571 3572 /* Enable or disable keep alive */ 3573 #define WCN36XX_HAL_KEEP_ALIVE_DISABLE 0 3574 #define WCN36XX_HAL_KEEP_ALIVE_ENABLE 1 3575 #define WCN36XX_KEEP_ALIVE_TIME_PERIOD 30 /* unit: s */ 3576 3577 /* Keep Alive request. */ 3578 struct wcn36xx_hal_keep_alive_req_msg { 3579 struct wcn36xx_hal_msg_header header; 3580 3581 u8 packet_type; 3582 u32 time_period; 3583 u8 host_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN]; 3584 u8 dest_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN]; 3585 u8 dest_addr[ETH_ALEN]; 3586 u8 bss_index; 3587 } __packed; 3588 3589 struct wcn36xx_hal_rssi_threshold_req_msg { 3590 struct wcn36xx_hal_msg_header header; 3591 3592 s8 threshold1:8; 3593 s8 threshold2:8; 3594 s8 threshold3:8; 3595 u8 thres1_pos_notify:1; 3596 u8 thres1_neg_notify:1; 3597 u8 thres2_pos_notify:1; 3598 u8 thres2_neg_notify:1; 3599 u8 thres3_pos_notify:1; 3600 u8 thres3_neg_notify:1; 3601 u8 reserved10:2; 3602 }; 3603 3604 struct wcn36xx_hal_enter_uapsd_req_msg { 3605 struct wcn36xx_hal_msg_header header; 3606 3607 u8 bk_delivery:1; 3608 u8 be_delivery:1; 3609 u8 vi_delivery:1; 3610 u8 vo_delivery:1; 3611 u8 bk_trigger:1; 3612 u8 be_trigger:1; 3613 u8 vi_trigger:1; 3614 u8 vo_trigger:1; 3615 u8 bss_index; 3616 }; 3617 3618 struct wcn36xx_hal_exit_uapsd_req_msg { 3619 struct wcn36xx_hal_msg_header header; 3620 u8 bss_index; 3621 }; 3622 3623 #define WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE 128 3624 #define WCN36XX_HAL_WOWL_BCAST_MAX_NUM_PATTERNS 16 3625 3626 struct wcn36xx_hal_wowl_add_bcast_ptrn_req_msg { 3627 struct wcn36xx_hal_msg_header header; 3628 3629 /* Pattern ID */ 3630 u8 id; 3631 3632 /* Pattern byte offset from beginning of the 802.11 packet to start 3633 * of the wake-up pattern */ 3634 u8 byte_Offset; 3635 3636 /* Non-Zero Pattern size */ 3637 u8 size; 3638 3639 /* Pattern */ 3640 u8 pattern[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; 3641 3642 /* Non-zero pattern mask size */ 3643 u8 mask_size; 3644 3645 /* Pattern mask */ 3646 u8 mask[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; 3647 3648 /* Extra pattern */ 3649 u8 extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; 3650 3651 /* Extra pattern mask */ 3652 u8 mask_extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; 3653 3654 u8 bss_index; 3655 }; 3656 3657 struct wcn36xx_hal_wow_del_bcast_ptrn_req_msg { 3658 struct wcn36xx_hal_msg_header header; 3659 3660 /* Pattern ID of the wakeup pattern to be deleted */ 3661 u8 id; 3662 u8 bss_index; 3663 }; 3664 3665 struct wcn36xx_hal_wowl_enter_req_msg { 3666 struct wcn36xx_hal_msg_header header; 3667 3668 /* Enables/disables magic packet filtering */ 3669 u8 magic_packet_enable; 3670 3671 /* Magic pattern */ 3672 u8 magic_pattern[ETH_ALEN]; 3673 3674 /* Enables/disables packet pattern filtering in firmware. Enabling 3675 * this flag enables broadcast pattern matching in Firmware. If 3676 * unicast pattern matching is also desired, 3677 * ucUcastPatternFilteringEnable flag must be set tot true as well 3678 */ 3679 u8 pattern_filtering_enable; 3680 3681 /* Enables/disables unicast packet pattern filtering. This flag 3682 * specifies whether we want to do pattern match on unicast packets 3683 * as well and not just broadcast packets. This flag has no effect 3684 * if the ucPatternFilteringEnable (main controlling flag) is set 3685 * to false 3686 */ 3687 u8 ucast_pattern_filtering_enable; 3688 3689 /* This configuration is valid only when magicPktEnable=1. It 3690 * requests hardware to wake up when it receives the Channel Switch 3691 * Action Frame. 3692 */ 3693 u8 wow_channel_switch_receive; 3694 3695 /* This configuration is valid only when magicPktEnable=1. It 3696 * requests hardware to wake up when it receives the 3697 * Deauthentication Frame. 3698 */ 3699 u8 wow_deauth_receive; 3700 3701 /* This configuration is valid only when magicPktEnable=1. It 3702 * requests hardware to wake up when it receives the Disassociation 3703 * Frame. 3704 */ 3705 u8 wow_disassoc_receive; 3706 3707 /* This configuration is valid only when magicPktEnable=1. It 3708 * requests hardware to wake up when it has missed consecutive 3709 * beacons. This is a hardware register configuration (NOT a 3710 * firmware configuration). 3711 */ 3712 u8 wow_max_missed_beacons; 3713 3714 /* This configuration is valid only when magicPktEnable=1. This is 3715 * a timeout value in units of microsec. It requests hardware to 3716 * unconditionally wake up after it has stayed in WoWLAN mode for 3717 * some time. Set 0 to disable this feature. 3718 */ 3719 u8 wow_max_sleep; 3720 3721 /* This configuration directs the WoW packet filtering to look for 3722 * EAP-ID requests embedded in EAPOL frames and use this as a wake 3723 * source. 3724 */ 3725 u8 wow_eap_id_request_enable; 3726 3727 /* This configuration directs the WoW packet filtering to look for 3728 * EAPOL-4WAY requests and use this as a wake source. 3729 */ 3730 u8 wow_eapol_4way_enable; 3731 3732 /* This configuration allows a host wakeup on an network scan 3733 * offload match. 3734 */ 3735 u8 wow_net_scan_offload_match; 3736 3737 /* This configuration allows a host wakeup on any GTK rekeying 3738 * error. 3739 */ 3740 u8 wow_gtk_rekey_error; 3741 3742 /* This configuration allows a host wakeup on BSS connection loss. 3743 */ 3744 u8 wow_bss_connection_loss; 3745 3746 u8 bss_index; 3747 }; 3748 3749 struct wcn36xx_hal_wowl_exit_req_msg { 3750 struct wcn36xx_hal_msg_header header; 3751 3752 u8 bss_index; 3753 }; 3754 3755 struct wcn36xx_hal_get_rssi_req_msg { 3756 struct wcn36xx_hal_msg_header header; 3757 }; 3758 3759 struct wcn36xx_hal_get_roam_rssi_req_msg { 3760 struct wcn36xx_hal_msg_header header; 3761 3762 /* Valid STA Idx for per STA stats request */ 3763 u32 sta_id; 3764 }; 3765 3766 struct wcn36xx_hal_set_uapsd_ac_params_req_msg { 3767 struct wcn36xx_hal_msg_header header; 3768 3769 /* STA index */ 3770 u8 sta_idx; 3771 3772 /* Access Category */ 3773 u8 ac; 3774 3775 /* User Priority */ 3776 u8 up; 3777 3778 /* Service Interval */ 3779 u32 service_interval; 3780 3781 /* Suspend Interval */ 3782 u32 suspend_interval; 3783 3784 /* Delay Interval */ 3785 u32 delay_interval; 3786 }; 3787 3788 struct wcn36xx_hal_configure_rxp_filter_req_msg { 3789 struct wcn36xx_hal_msg_header header; 3790 3791 u8 set_mcst_bcst_filter_setting; 3792 u8 set_mcst_bcst_filter; 3793 }; 3794 3795 struct wcn36xx_hal_enter_imps_rsp_msg { 3796 struct wcn36xx_hal_msg_header header; 3797 3798 /* success or failure */ 3799 u32 status; 3800 }; 3801 3802 struct wcn36xx_hal_exit_imps_rsp_msg { 3803 struct wcn36xx_hal_msg_header header; 3804 3805 /* success or failure */ 3806 u32 status; 3807 }; 3808 3809 struct wcn36xx_hal_enter_bmps_rsp_msg { 3810 struct wcn36xx_hal_msg_header header; 3811 3812 /* success or failure */ 3813 u32 status; 3814 3815 u8 bss_index; 3816 } __packed; 3817 3818 struct wcn36xx_hal_exit_bmps_rsp_msg { 3819 struct wcn36xx_hal_msg_header header; 3820 3821 /* success or failure */ 3822 u32 status; 3823 3824 u8 bss_index; 3825 } __packed; 3826 3827 struct wcn36xx_hal_enter_uapsd_rsp_msg { 3828 struct wcn36xx_hal_msg_header header; 3829 3830 /* success or failure */ 3831 u32 status; 3832 3833 u8 bss_index; 3834 }; 3835 3836 struct wcn36xx_hal_exit_uapsd_rsp_msg { 3837 struct wcn36xx_hal_msg_header header; 3838 3839 /* success or failure */ 3840 u32 status; 3841 3842 u8 bss_index; 3843 }; 3844 3845 struct wcn36xx_hal_rssi_notification_ind_msg { 3846 struct wcn36xx_hal_msg_header header; 3847 3848 u32 rssi_thres1_pos_cross:1; 3849 u32 rssi_thres1_neg_cross:1; 3850 u32 rssi_thres2_pos_cross:1; 3851 u32 rssi_thres2_neg_cross:1; 3852 u32 rssi_thres3_pos_cross:1; 3853 u32 rssi_thres3_neg_cross:1; 3854 u32 avg_rssi:8; 3855 u32 reserved:18; 3856 3857 }; 3858 3859 struct wcn36xx_hal_get_rssio_rsp_msg { 3860 struct wcn36xx_hal_msg_header header; 3861 3862 /* success or failure */ 3863 u32 status; 3864 s8 rssi; 3865 3866 }; 3867 3868 struct wcn36xx_hal_get_roam_rssi_rsp_msg { 3869 struct wcn36xx_hal_msg_header header; 3870 3871 /* success or failure */ 3872 u32 status; 3873 3874 u8 sta_id; 3875 s8 rssi; 3876 }; 3877 3878 struct wcn36xx_hal_wowl_enter_rsp_msg { 3879 struct wcn36xx_hal_msg_header header; 3880 3881 /* success or failure */ 3882 u32 status; 3883 u8 bss_index; 3884 }; 3885 3886 struct wcn36xx_hal_wowl_exit_rsp_msg { 3887 struct wcn36xx_hal_msg_header header; 3888 3889 /* success or failure */ 3890 u32 status; 3891 u8 bss_index; 3892 }; 3893 3894 struct wcn36xx_hal_add_bcn_filter_rsp_msg { 3895 struct wcn36xx_hal_msg_header header; 3896 3897 /* success or failure */ 3898 u32 status; 3899 }; 3900 3901 struct wcn36xx_hal_rem_bcn_filter_rsp_msg { 3902 struct wcn36xx_hal_msg_header header; 3903 3904 /* success or failure */ 3905 u32 status; 3906 }; 3907 3908 struct wcn36xx_hal_add_wowl_bcast_ptrn_rsp_msg { 3909 struct wcn36xx_hal_msg_header header; 3910 3911 /* success or failure */ 3912 u32 status; 3913 u8 bss_index; 3914 }; 3915 3916 struct wcn36xx_hal_del_wowl_bcast_ptrn_rsp_msg { 3917 struct wcn36xx_hal_msg_header header; 3918 3919 /* success or failure */ 3920 u32 status; 3921 u8 bss_index; 3922 }; 3923 3924 struct wcn36xx_hal_host_offload_rsp_msg { 3925 struct wcn36xx_hal_msg_header header; 3926 3927 /* success or failure */ 3928 u32 status; 3929 }; 3930 3931 struct wcn36xx_hal_keep_alive_rsp_msg { 3932 struct wcn36xx_hal_msg_header header; 3933 3934 /* success or failure */ 3935 u32 status; 3936 }; 3937 3938 struct wcn36xx_hal_set_rssi_thresh_rsp_msg { 3939 struct wcn36xx_hal_msg_header header; 3940 3941 /* success or failure */ 3942 u32 status; 3943 }; 3944 3945 struct wcn36xx_hal_set_uapsd_ac_params_rsp_msg { 3946 struct wcn36xx_hal_msg_header header; 3947 3948 /* success or failure */ 3949 u32 status; 3950 }; 3951 3952 struct wcn36xx_hal_configure_rxp_filter_rsp_msg { 3953 struct wcn36xx_hal_msg_header header; 3954 3955 /* success or failure */ 3956 u32 status; 3957 }; 3958 3959 struct set_max_tx_pwr_req { 3960 struct wcn36xx_hal_msg_header header; 3961 3962 /* BSSID is needed to identify which session issued this request. 3963 * As the request has power constraints, this should be applied 3964 * only to that session */ 3965 u8 bssid[ETH_ALEN]; 3966 3967 u8 self_addr[ETH_ALEN]; 3968 3969 /* In request, power == MaxTx power to be used. */ 3970 u8 power; 3971 }; 3972 3973 struct set_max_tx_pwr_rsp_msg { 3974 struct wcn36xx_hal_msg_header header; 3975 3976 /* power == tx power used for management frames */ 3977 u8 power; 3978 3979 /* success or failure */ 3980 u32 status; 3981 }; 3982 3983 struct set_tx_pwr_req_msg { 3984 struct wcn36xx_hal_msg_header header; 3985 3986 /* TX Power in milli watts */ 3987 u32 tx_power; 3988 3989 u8 bss_index; 3990 }; 3991 3992 struct set_tx_pwr_rsp_msg { 3993 struct wcn36xx_hal_msg_header header; 3994 3995 /* success or failure */ 3996 u32 status; 3997 }; 3998 3999 struct get_tx_pwr_req_msg { 4000 struct wcn36xx_hal_msg_header header; 4001 4002 u8 sta_id; 4003 }; 4004 4005 struct get_tx_pwr_rsp_msg { 4006 struct wcn36xx_hal_msg_header header; 4007 4008 /* success or failure */ 4009 u32 status; 4010 4011 /* TX Power in milli watts */ 4012 u32 tx_power; 4013 }; 4014 4015 struct set_p2p_gonoa_req_msg { 4016 struct wcn36xx_hal_msg_header header; 4017 4018 u8 opp_ps; 4019 u32 ct_window; 4020 u8 count; 4021 u32 duration; 4022 u32 interval; 4023 u32 single_noa_duration; 4024 u8 ps_selection; 4025 }; 4026 4027 struct set_p2p_gonoa_rsp_msg { 4028 struct wcn36xx_hal_msg_header header; 4029 4030 /* success or failure */ 4031 u32 status; 4032 }; 4033 4034 struct wcn36xx_hal_add_sta_self_req { 4035 struct wcn36xx_hal_msg_header header; 4036 4037 u8 self_addr[ETH_ALEN]; 4038 u32 status; 4039 } __packed; 4040 4041 struct wcn36xx_hal_add_sta_self_rsp_msg { 4042 struct wcn36xx_hal_msg_header header; 4043 4044 /* success or failure */ 4045 u32 status; 4046 4047 /* Self STA Index */ 4048 u8 self_sta_index; 4049 4050 /* DPU Index (IGTK, PTK, GTK all same) */ 4051 u8 dpu_index; 4052 4053 /* DPU Signature */ 4054 u8 dpu_signature; 4055 } __packed; 4056 4057 struct wcn36xx_hal_del_sta_self_req_msg { 4058 struct wcn36xx_hal_msg_header header; 4059 4060 u8 self_addr[ETH_ALEN]; 4061 } __packed; 4062 4063 struct wcn36xx_hal_del_sta_self_rsp_msg { 4064 struct wcn36xx_hal_msg_header header; 4065 4066 /*success or failure */ 4067 u32 status; 4068 4069 u8 self_addr[ETH_ALEN]; 4070 } __packed; 4071 4072 struct aggr_add_ts_req { 4073 struct wcn36xx_hal_msg_header header; 4074 4075 /* Station Index */ 4076 u16 sta_idx; 4077 4078 /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS. 4079 * This will carry the bitmap with the bit positions representing 4080 * different AC.s */ 4081 u16 tspec_index; 4082 4083 /* Tspec info per AC To program TPE with required parameters */ 4084 struct wcn36xx_hal_tspec_ie tspec[WCN36XX_HAL_MAX_AC]; 4085 4086 /* U-APSD Flags: 1b per AC. Encoded as follows: 4087 b7 b6 b5 b4 b3 b2 b1 b0 = 4088 X X X X BE BK VI VO */ 4089 u8 uapsd; 4090 4091 /* These parameters are for all the access categories */ 4092 4093 /* Service Interval */ 4094 u32 service_interval[WCN36XX_HAL_MAX_AC]; 4095 4096 /* Suspend Interval */ 4097 u32 suspend_interval[WCN36XX_HAL_MAX_AC]; 4098 4099 /* Delay Interval */ 4100 u32 delay_interval[WCN36XX_HAL_MAX_AC]; 4101 }; 4102 4103 struct aggr_add_ts_rsp_msg { 4104 struct wcn36xx_hal_msg_header header; 4105 4106 /* success or failure */ 4107 u32 status0; 4108 4109 /* FIXME PRIMA for future use for 11R */ 4110 u32 status1; 4111 }; 4112 4113 struct wcn36xx_hal_configure_apps_cpu_wakeup_state_req_msg { 4114 struct wcn36xx_hal_msg_header header; 4115 4116 u8 is_apps_cpu_awake; 4117 }; 4118 4119 struct wcn36xx_hal_configure_apps_cpu_wakeup_state_rsp_msg { 4120 struct wcn36xx_hal_msg_header header; 4121 4122 /* success or failure */ 4123 u32 status; 4124 }; 4125 4126 struct wcn36xx_hal_dump_cmd_req_msg { 4127 struct wcn36xx_hal_msg_header header; 4128 4129 u32 arg1; 4130 u32 arg2; 4131 u32 arg3; 4132 u32 arg4; 4133 u32 arg5; 4134 } __packed; 4135 4136 struct wcn36xx_hal_dump_cmd_rsp_msg { 4137 struct wcn36xx_hal_msg_header header; 4138 4139 /* success or failure */ 4140 u32 status; 4141 4142 /* Length of the responce message */ 4143 u32 rsp_length; 4144 4145 /* FIXME: Currently considering the responce will be less than 4146 * 100bytes */ 4147 u8 rsp_buffer[DUMPCMD_RSP_BUFFER]; 4148 } __packed; 4149 4150 #define WLAN_COEX_IND_DATA_SIZE (4) 4151 #define WLAN_COEX_IND_TYPE_DISABLE_HB_MONITOR (0) 4152 #define WLAN_COEX_IND_TYPE_ENABLE_HB_MONITOR (1) 4153 4154 struct coex_ind_msg { 4155 struct wcn36xx_hal_msg_header header; 4156 4157 /* Coex Indication Type */ 4158 u32 type; 4159 4160 /* Coex Indication Data */ 4161 u32 data[WLAN_COEX_IND_DATA_SIZE]; 4162 }; 4163 4164 struct wcn36xx_hal_tx_compl_ind_msg { 4165 struct wcn36xx_hal_msg_header header; 4166 4167 /* Tx Complete Indication Success or Failure */ 4168 u32 status; 4169 }; 4170 4171 struct wcn36xx_hal_wlan_host_suspend_ind_msg { 4172 struct wcn36xx_hal_msg_header header; 4173 4174 u32 configured_mcst_bcst_filter_setting; 4175 u32 active_session_count; 4176 }; 4177 4178 struct wcn36xx_hal_wlan_exclude_unencrpted_ind_msg { 4179 struct wcn36xx_hal_msg_header header; 4180 4181 u8 dot11_exclude_unencrypted; 4182 u8 bssid[ETH_ALEN]; 4183 }; 4184 4185 struct noa_attr_ind_msg { 4186 struct wcn36xx_hal_msg_header header; 4187 4188 u8 index; 4189 u8 opp_ps_flag; 4190 u16 ctwin; 4191 4192 u16 noa1_interval_count; 4193 u16 bss_index; 4194 u32 noa1_duration; 4195 u32 noa1_interval; 4196 u32 noa1_starttime; 4197 4198 u16 noa2_interval_count; 4199 u16 reserved2; 4200 u32 noa2_duration; 4201 u32 noa2_interval; 4202 u32 noa2_start_time; 4203 4204 u32 status; 4205 }; 4206 4207 struct noa_start_ind_msg { 4208 struct wcn36xx_hal_msg_header header; 4209 4210 u32 status; 4211 u32 bss_index; 4212 }; 4213 4214 struct wcn36xx_hal_wlan_host_resume_req_msg { 4215 struct wcn36xx_hal_msg_header header; 4216 4217 u8 configured_mcst_bcst_filter_setting; 4218 }; 4219 4220 struct wcn36xx_hal_host_resume_rsp_msg { 4221 struct wcn36xx_hal_msg_header header; 4222 4223 /* success or failure */ 4224 u32 status; 4225 }; 4226 4227 struct wcn36xx_hal_del_ba_ind_msg { 4228 struct wcn36xx_hal_msg_header header; 4229 4230 u16 sta_idx; 4231 4232 /* Peer MAC Address, whose BA session has timed out */ 4233 u8 peer_addr[ETH_ALEN]; 4234 4235 /* TID for which a BA session timeout is being triggered */ 4236 u8 ba_tid; 4237 4238 /* DELBA direction 4239 * 1 - Originator 4240 * 0 - Recipient 4241 */ 4242 u8 direction; 4243 4244 u32 reason_code; 4245 4246 /* TO SUPPORT BT-AMP */ 4247 u8 bssid[ETH_ALEN]; 4248 }; 4249 4250 /* PNO Messages */ 4251 4252 /* Max number of channels that a network can be found on */ 4253 #define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS 26 4254 4255 /* Max number of channels that a network can be found on */ 4256 #define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX 60 4257 4258 /* Maximum numbers of networks supported by PNO */ 4259 #define WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS 16 4260 4261 /* The number of scan time intervals that can be programmed into PNO */ 4262 #define WCN36XX_HAL_PNO_MAX_SCAN_TIMERS 10 4263 4264 /* Maximum size of the probe template */ 4265 #define WCN36XX_HAL_PNO_MAX_PROBE_SIZE 450 4266 4267 /* Type of PNO enabling: 4268 * 4269 * Immediate - scanning will start immediately and PNO procedure will be 4270 * repeated based on timer 4271 * 4272 * Suspend - scanning will start at suspend 4273 * 4274 * Resume - scanning will start on system resume 4275 */ 4276 enum pno_mode { 4277 PNO_MODE_IMMEDIATE, 4278 PNO_MODE_ON_SUSPEND, 4279 PNO_MODE_ON_RESUME, 4280 PNO_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 4281 }; 4282 4283 /* Authentication type */ 4284 enum auth_type { 4285 AUTH_TYPE_ANY = 0, 4286 AUTH_TYPE_OPEN_SYSTEM = 1, 4287 4288 /* Upper layer authentication types */ 4289 AUTH_TYPE_WPA = 2, 4290 AUTH_TYPE_WPA_PSK = 3, 4291 4292 AUTH_TYPE_RSN = 4, 4293 AUTH_TYPE_RSN_PSK = 5, 4294 AUTH_TYPE_FT_RSN = 6, 4295 AUTH_TYPE_FT_RSN_PSK = 7, 4296 AUTH_TYPE_WAPI_WAI_CERTIFICATE = 8, 4297 AUTH_TYPE_WAPI_WAI_PSK = 9, 4298 4299 AUTH_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 4300 }; 4301 4302 /* Encryption type */ 4303 enum ed_type { 4304 ED_ANY = 0, 4305 ED_NONE = 1, 4306 ED_WEP = 2, 4307 ED_TKIP = 3, 4308 ED_CCMP = 4, 4309 ED_WPI = 5, 4310 4311 ED_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 4312 }; 4313 4314 /* SSID broadcast type */ 4315 enum ssid_bcast_type { 4316 BCAST_UNKNOWN = 0, 4317 BCAST_NORMAL = 1, 4318 BCAST_HIDDEN = 2, 4319 4320 BCAST_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE 4321 }; 4322 4323 /* The network description for which PNO will have to look for */ 4324 struct network_type { 4325 /* SSID of the BSS */ 4326 struct wcn36xx_hal_mac_ssid ssid; 4327 4328 /* Authentication type for the network */ 4329 enum auth_type authentication; 4330 4331 /* Encryption type for the network */ 4332 enum ed_type encryption; 4333 4334 /* Indicate the channel on which the Network can be found 0 - if 4335 * all channels */ 4336 u8 channel_count; 4337 u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; 4338 4339 /* Indicates the RSSI threshold for the network to be considered */ 4340 u8 rssi_threshold; 4341 }; 4342 4343 struct scan_timer { 4344 /* How much it should wait */ 4345 u32 value; 4346 4347 /* How many times it should repeat that wait value 0 - keep using 4348 * this timer until PNO is disabled */ 4349 u32 repeat; 4350 4351 /* e.g: 2 3 4 0 - it will wait 2s between consecutive scans for 3 4352 * times - after that it will wait 4s between consecutive scans 4353 * until disabled */ 4354 }; 4355 4356 /* The network parameters to be sent to the PNO algorithm */ 4357 struct scan_timers_type { 4358 /* set to 0 if you wish for PNO to use its default telescopic timer */ 4359 u8 count; 4360 4361 /* A set value represents the amount of time that PNO will wait 4362 * between two consecutive scan procedures If the desired is for a 4363 * uniform timer that fires always at the exact same interval - one 4364 * single value is to be set If there is a desire for a more 4365 * complex - telescopic like timer multiple values can be set - 4366 * once PNO reaches the end of the array it will continue scanning 4367 * at intervals presented by the last value */ 4368 struct scan_timer values[WCN36XX_HAL_PNO_MAX_SCAN_TIMERS]; 4369 }; 4370 4371 /* Preferred network list request */ 4372 struct set_pref_netw_list_req { 4373 struct wcn36xx_hal_msg_header header; 4374 4375 /* Enable PNO */ 4376 u32 enable; 4377 4378 /* Immediate, On Suspend, On Resume */ 4379 enum pno_mode mode; 4380 4381 /* Number of networks sent for PNO */ 4382 u32 networks_count; 4383 4384 /* The networks that PNO needs to look for */ 4385 struct network_type networks[WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS]; 4386 4387 /* The scan timers required for PNO */ 4388 struct scan_timers_type scan_timers; 4389 4390 /* Probe template for 2.4GHz band */ 4391 u16 band_24g_probe_size; 4392 u8 band_24g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; 4393 4394 /* Probe template for 5GHz band */ 4395 u16 band_5g_probe_size; 4396 u8 band_5g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; 4397 }; 4398 4399 /* The network description for which PNO will have to look for */ 4400 struct network_type_new { 4401 /* SSID of the BSS */ 4402 struct wcn36xx_hal_mac_ssid ssid; 4403 4404 /* Authentication type for the network */ 4405 enum auth_type authentication; 4406 4407 /* Encryption type for the network */ 4408 enum ed_type encryption; 4409 4410 /* SSID broadcast type, normal, hidden or unknown */ 4411 enum ssid_bcast_type bcast_network_type; 4412 4413 /* Indicate the channel on which the Network can be found 0 - if 4414 * all channels */ 4415 u8 channel_count; 4416 u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; 4417 4418 /* Indicates the RSSI threshold for the network to be considered */ 4419 u8 rssi_threshold; 4420 }; 4421 4422 /* Preferred network list request new */ 4423 struct set_pref_netw_list_req_new { 4424 struct wcn36xx_hal_msg_header header; 4425 4426 /* Enable PNO */ 4427 u32 enable; 4428 4429 /* Immediate, On Suspend, On Resume */ 4430 enum pno_mode mode; 4431 4432 /* Number of networks sent for PNO */ 4433 u32 networks_count; 4434 4435 /* The networks that PNO needs to look for */ 4436 struct network_type_new networks[WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS]; 4437 4438 /* The scan timers required for PNO */ 4439 struct scan_timers_type scan_timers; 4440 4441 /* Probe template for 2.4GHz band */ 4442 u16 band_24g_probe_size; 4443 u8 band_24g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; 4444 4445 /* Probe template for 5GHz band */ 4446 u16 band_5g_probe_size; 4447 u8 band_5g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; 4448 }; 4449 4450 /* Preferred network list response */ 4451 struct set_pref_netw_list_resp { 4452 struct wcn36xx_hal_msg_header header; 4453 4454 /* status of the request - just to indicate that PNO has 4455 * acknowledged the request and will start scanning */ 4456 u32 status; 4457 }; 4458 4459 /* Preferred network found indication */ 4460 struct pref_netw_found_ind { 4461 4462 struct wcn36xx_hal_msg_header header; 4463 4464 /* Network that was found with the highest RSSI */ 4465 struct wcn36xx_hal_mac_ssid ssid; 4466 4467 /* Indicates the RSSI */ 4468 u8 rssi; 4469 }; 4470 4471 /* RSSI Filter request */ 4472 struct set_rssi_filter_req { 4473 struct wcn36xx_hal_msg_header header; 4474 4475 /* RSSI Threshold */ 4476 u8 rssi_threshold; 4477 }; 4478 4479 /* Set RSSI filter resp */ 4480 struct set_rssi_filter_resp { 4481 struct wcn36xx_hal_msg_header header; 4482 4483 /* status of the request */ 4484 u32 status; 4485 }; 4486 4487 /* Update scan params - sent from host to PNO to be used during PNO 4488 * scanningx */ 4489 struct wcn36xx_hal_update_scan_params_req { 4490 4491 struct wcn36xx_hal_msg_header header; 4492 4493 /* Host setting for 11d */ 4494 u8 dot11d_enabled; 4495 4496 /* Lets PNO know that host has determined the regulatory domain */ 4497 u8 dot11d_resolved; 4498 4499 /* Channels on which PNO is allowed to scan */ 4500 u8 channel_count; 4501 u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; 4502 4503 /* Minimum channel time */ 4504 u16 active_min_ch_time; 4505 4506 /* Maximum channel time */ 4507 u16 active_max_ch_time; 4508 4509 /* Minimum channel time */ 4510 u16 passive_min_ch_time; 4511 4512 /* Maximum channel time */ 4513 u16 passive_max_ch_time; 4514 4515 /* Cb State */ 4516 enum phy_chan_bond_state state; 4517 } __packed; 4518 4519 /* Update scan params - sent from host to PNO to be used during PNO 4520 * scanningx */ 4521 struct wcn36xx_hal_update_scan_params_req_ex { 4522 4523 struct wcn36xx_hal_msg_header header; 4524 4525 /* Host setting for 11d */ 4526 u8 dot11d_enabled; 4527 4528 /* Lets PNO know that host has determined the regulatory domain */ 4529 u8 dot11d_resolved; 4530 4531 /* Channels on which PNO is allowed to scan */ 4532 u8 channel_count; 4533 u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX]; 4534 4535 /* Minimum channel time */ 4536 u16 active_min_ch_time; 4537 4538 /* Maximum channel time */ 4539 u16 active_max_ch_time; 4540 4541 /* Minimum channel time */ 4542 u16 passive_min_ch_time; 4543 4544 /* Maximum channel time */ 4545 u16 passive_max_ch_time; 4546 4547 /* Cb State */ 4548 enum phy_chan_bond_state state; 4549 } __packed; 4550 4551 /* Update scan params - sent from host to PNO to be used during PNO 4552 * scanningx */ 4553 struct wcn36xx_hal_update_scan_params_resp { 4554 4555 struct wcn36xx_hal_msg_header header; 4556 4557 /* status of the request */ 4558 u32 status; 4559 } __packed; 4560 4561 struct wcn36xx_hal_set_tx_per_tracking_req_msg { 4562 struct wcn36xx_hal_msg_header header; 4563 4564 /* 0: disable, 1:enable */ 4565 u8 tx_per_tracking_enable; 4566 4567 /* Check period, unit is sec. */ 4568 u8 tx_per_tracking_period; 4569 4570 /* (Fail TX packet)/(Total TX packet) ratio, the unit is 10%. */ 4571 u8 tx_per_tracking_ratio; 4572 4573 /* A watermark of check number, once the tx packet exceed this 4574 * number, we do the check, default is 5 */ 4575 u32 tx_per_tracking_watermark; 4576 }; 4577 4578 struct wcn36xx_hal_set_tx_per_tracking_rsp_msg { 4579 struct wcn36xx_hal_msg_header header; 4580 4581 /* success or failure */ 4582 u32 status; 4583 4584 }; 4585 4586 struct tx_per_hit_ind_msg { 4587 struct wcn36xx_hal_msg_header header; 4588 }; 4589 4590 /* Packet Filtering Definitions Begin */ 4591 #define WCN36XX_HAL_PROTOCOL_DATA_LEN 8 4592 #define WCN36XX_HAL_MAX_NUM_MULTICAST_ADDRESS 240 4593 #define WCN36XX_HAL_MAX_NUM_FILTERS 20 4594 #define WCN36XX_HAL_MAX_CMP_PER_FILTER 10 4595 4596 enum wcn36xx_hal_receive_packet_filter_type { 4597 HAL_RCV_FILTER_TYPE_INVALID, 4598 HAL_RCV_FILTER_TYPE_FILTER_PKT, 4599 HAL_RCV_FILTER_TYPE_BUFFER_PKT, 4600 HAL_RCV_FILTER_TYPE_MAX_ENUM_SIZE 4601 }; 4602 4603 enum wcn36xx_hal_rcv_pkt_flt_protocol_type { 4604 HAL_FILTER_PROTO_TYPE_INVALID, 4605 HAL_FILTER_PROTO_TYPE_MAC, 4606 HAL_FILTER_PROTO_TYPE_ARP, 4607 HAL_FILTER_PROTO_TYPE_IPV4, 4608 HAL_FILTER_PROTO_TYPE_IPV6, 4609 HAL_FILTER_PROTO_TYPE_UDP, 4610 HAL_FILTER_PROTO_TYPE_MAX 4611 }; 4612 4613 enum wcn36xx_hal_rcv_pkt_flt_cmp_flag_type { 4614 HAL_FILTER_CMP_TYPE_INVALID, 4615 HAL_FILTER_CMP_TYPE_EQUAL, 4616 HAL_FILTER_CMP_TYPE_MASK_EQUAL, 4617 HAL_FILTER_CMP_TYPE_NOT_EQUAL, 4618 HAL_FILTER_CMP_TYPE_MAX 4619 }; 4620 4621 struct wcn36xx_hal_rcv_pkt_filter_params { 4622 u8 protocol_layer; 4623 u8 cmp_flag; 4624 4625 /* Length of the data to compare */ 4626 u16 data_length; 4627 4628 /* from start of the respective frame header */ 4629 u8 data_offset; 4630 4631 /* Reserved field */ 4632 u8 reserved; 4633 4634 /* Data to compare */ 4635 u8 compare_data[WCN36XX_HAL_PROTOCOL_DATA_LEN]; 4636 4637 /* Mask to be applied on the received packet data before compare */ 4638 u8 data_mask[WCN36XX_HAL_PROTOCOL_DATA_LEN]; 4639 }; 4640 4641 struct wcn36xx_hal_sessionized_rcv_pkt_filter_cfg_type { 4642 u8 id; 4643 u8 type; 4644 u8 params_count; 4645 u32 coleasce_time; 4646 u8 bss_index; 4647 struct wcn36xx_hal_rcv_pkt_filter_params params[1]; 4648 }; 4649 4650 struct wcn36xx_hal_set_rcv_pkt_filter_req_msg { 4651 struct wcn36xx_hal_msg_header header; 4652 4653 u8 id; 4654 u8 type; 4655 u8 params_count; 4656 u32 coalesce_time; 4657 struct wcn36xx_hal_rcv_pkt_filter_params params[1]; 4658 }; 4659 4660 struct wcn36xx_hal_rcv_flt_mc_addr_list_type { 4661 /* from start of the respective frame header */ 4662 u8 data_offset; 4663 4664 u32 mc_addr_count; 4665 u8 mc_addr[WCN36XX_HAL_MAX_NUM_MULTICAST_ADDRESS][ETH_ALEN]; 4666 u8 bss_index; 4667 } __packed; 4668 4669 struct wcn36xx_hal_set_pkt_filter_rsp_msg { 4670 struct wcn36xx_hal_msg_header header; 4671 4672 /* success or failure */ 4673 u32 status; 4674 4675 u8 bss_index; 4676 }; 4677 4678 struct wcn36xx_hal_rcv_flt_pkt_match_cnt_req_msg { 4679 struct wcn36xx_hal_msg_header header; 4680 4681 u8 bss_index; 4682 }; 4683 4684 struct wcn36xx_hal_rcv_flt_pkt_match_cnt { 4685 u8 id; 4686 u32 match_cnt; 4687 }; 4688 4689 struct wcn36xx_hal_rcv_flt_pkt_match_cnt_rsp_msg { 4690 struct wcn36xx_hal_msg_header header; 4691 4692 /* Success or Failure */ 4693 u32 status; 4694 4695 u32 match_count; 4696 struct wcn36xx_hal_rcv_flt_pkt_match_cnt 4697 matches[WCN36XX_HAL_MAX_NUM_FILTERS]; 4698 u8 bss_index; 4699 }; 4700 4701 struct wcn36xx_hal_rcv_flt_pkt_clear_param { 4702 /* only valid for response message */ 4703 u32 status; 4704 u8 id; 4705 u8 bss_index; 4706 }; 4707 4708 struct wcn36xx_hal_rcv_flt_pkt_clear_req_msg { 4709 struct wcn36xx_hal_msg_header header; 4710 struct wcn36xx_hal_rcv_flt_pkt_clear_param param; 4711 }; 4712 4713 struct wcn36xx_hal_rcv_flt_pkt_clear_rsp_msg { 4714 struct wcn36xx_hal_msg_header header; 4715 struct wcn36xx_hal_rcv_flt_pkt_clear_param param; 4716 }; 4717 4718 struct wcn36xx_hal_rcv_flt_pkt_set_mc_list_req_msg { 4719 struct wcn36xx_hal_msg_header header; 4720 struct wcn36xx_hal_rcv_flt_mc_addr_list_type mc_addr_list; 4721 } __packed; 4722 4723 struct wcn36xx_hal_rcv_flt_pkt_set_mc_list_rsp_msg { 4724 struct wcn36xx_hal_msg_header header; 4725 u32 status; 4726 u8 bss_index; 4727 }; 4728 4729 /* Packet Filtering Definitions End */ 4730 4731 struct wcn36xx_hal_set_power_params_req_msg { 4732 struct wcn36xx_hal_msg_header header; 4733 4734 /* Ignore DTIM */ 4735 u32 ignore_dtim; 4736 4737 /* DTIM Period */ 4738 u32 dtim_period; 4739 4740 /* Listen Interval */ 4741 u32 listen_interval; 4742 4743 /* Broadcast Multicast Filter */ 4744 u32 bcast_mcast_filter; 4745 4746 /* Beacon Early Termination */ 4747 u32 enable_bet; 4748 4749 /* Beacon Early Termination Interval */ 4750 u32 bet_interval; 4751 } __packed; 4752 4753 struct wcn36xx_hal_set_power_params_resp { 4754 4755 struct wcn36xx_hal_msg_header header; 4756 4757 /* status of the request */ 4758 u32 status; 4759 } __packed; 4760 4761 #define WCN36XX_HAL_CAPS_SIZE 4 4762 4763 struct wcn36xx_hal_feat_caps_msg { 4764 4765 struct wcn36xx_hal_msg_header header; 4766 4767 u32 feat_caps[WCN36XX_HAL_CAPS_SIZE]; 4768 } __packed; 4769 4770 /* status codes to help debug rekey failures */ 4771 enum gtk_rekey_status { 4772 WCN36XX_HAL_GTK_REKEY_STATUS_SUCCESS = 0, 4773 4774 /* rekey detected, but not handled */ 4775 WCN36XX_HAL_GTK_REKEY_STATUS_NOT_HANDLED = 1, 4776 4777 /* MIC check error on M1 */ 4778 WCN36XX_HAL_GTK_REKEY_STATUS_MIC_ERROR = 2, 4779 4780 /* decryption error on M1 */ 4781 WCN36XX_HAL_GTK_REKEY_STATUS_DECRYPT_ERROR = 3, 4782 4783 /* M1 replay detected */ 4784 WCN36XX_HAL_GTK_REKEY_STATUS_REPLAY_ERROR = 4, 4785 4786 /* missing GTK key descriptor in M1 */ 4787 WCN36XX_HAL_GTK_REKEY_STATUS_MISSING_KDE = 5, 4788 4789 /* missing iGTK key descriptor in M1 */ 4790 WCN36XX_HAL_GTK_REKEY_STATUS_MISSING_IGTK_KDE = 6, 4791 4792 /* key installation error */ 4793 WCN36XX_HAL_GTK_REKEY_STATUS_INSTALL_ERROR = 7, 4794 4795 /* iGTK key installation error */ 4796 WCN36XX_HAL_GTK_REKEY_STATUS_IGTK_INSTALL_ERROR = 8, 4797 4798 /* GTK rekey M2 response TX error */ 4799 WCN36XX_HAL_GTK_REKEY_STATUS_RESP_TX_ERROR = 9, 4800 4801 /* non-specific general error */ 4802 WCN36XX_HAL_GTK_REKEY_STATUS_GEN_ERROR = 255 4803 }; 4804 4805 /* wake reason types */ 4806 enum wake_reason_type { 4807 WCN36XX_HAL_WAKE_REASON_NONE = 0, 4808 4809 /* magic packet match */ 4810 WCN36XX_HAL_WAKE_REASON_MAGIC_PACKET = 1, 4811 4812 /* host defined pattern match */ 4813 WCN36XX_HAL_WAKE_REASON_PATTERN_MATCH = 2, 4814 4815 /* EAP-ID frame detected */ 4816 WCN36XX_HAL_WAKE_REASON_EAPID_PACKET = 3, 4817 4818 /* start of EAPOL 4-way handshake detected */ 4819 WCN36XX_HAL_WAKE_REASON_EAPOL4WAY_PACKET = 4, 4820 4821 /* network scan offload match */ 4822 WCN36XX_HAL_WAKE_REASON_NETSCAN_OFFL_MATCH = 5, 4823 4824 /* GTK rekey status wakeup (see status) */ 4825 WCN36XX_HAL_WAKE_REASON_GTK_REKEY_STATUS = 6, 4826 4827 /* BSS connection lost */ 4828 WCN36XX_HAL_WAKE_REASON_BSS_CONN_LOST = 7, 4829 }; 4830 4831 /* 4832 Wake Packet which is saved at tWakeReasonParams.DataStart 4833 This data is sent for any wake reasons that involve a packet-based wakeup : 4834 4835 WCN36XX_HAL_WAKE_REASON_TYPE_MAGIC_PACKET 4836 WCN36XX_HAL_WAKE_REASON_TYPE_PATTERN_MATCH 4837 WCN36XX_HAL_WAKE_REASON_TYPE_EAPID_PACKET 4838 WCN36XX_HAL_WAKE_REASON_TYPE_EAPOL4WAY_PACKET 4839 WCN36XX_HAL_WAKE_REASON_TYPE_GTK_REKEY_STATUS 4840 4841 The information is provided to the host for auditing and debug purposes 4842 4843 */ 4844 4845 /* Wake reason indication */ 4846 struct wcn36xx_hal_wake_reason_ind { 4847 struct wcn36xx_hal_msg_header header; 4848 4849 /* see tWakeReasonType */ 4850 u32 reason; 4851 4852 /* argument specific to the reason type */ 4853 u32 reason_arg; 4854 4855 /* length of optional data stored in this message, in case HAL 4856 * truncates the data (i.e. data packets) this length will be less 4857 * than the actual length */ 4858 u32 stored_data_len; 4859 4860 /* actual length of data */ 4861 u32 actual_data_len; 4862 4863 /* variable length start of data (length == storedDataLen) see 4864 * specific wake type */ 4865 u8 data_start[1]; 4866 4867 u32 bss_index:8; 4868 u32 reserved:24; 4869 }; 4870 4871 #define WCN36XX_HAL_GTK_KEK_BYTES 16 4872 #define WCN36XX_HAL_GTK_KCK_BYTES 16 4873 4874 #define WCN36XX_HAL_GTK_OFFLOAD_FLAGS_DISABLE (1 << 0) 4875 4876 #define GTK_SET_BSS_KEY_TAG 0x1234AA55 4877 4878 struct wcn36xx_hal_gtk_offload_req_msg { 4879 struct wcn36xx_hal_msg_header header; 4880 4881 /* optional flags */ 4882 u32 flags; 4883 4884 /* Key confirmation key */ 4885 u8 kck[WCN36XX_HAL_GTK_KCK_BYTES]; 4886 4887 /* key encryption key */ 4888 u8 kek[WCN36XX_HAL_GTK_KEK_BYTES]; 4889 4890 /* replay counter */ 4891 u64 key_replay_counter; 4892 4893 u8 bss_index; 4894 } __packed; 4895 4896 struct wcn36xx_hal_gtk_offload_rsp_msg { 4897 struct wcn36xx_hal_msg_header header; 4898 4899 /* success or failure */ 4900 u32 status; 4901 4902 u8 bss_index; 4903 }; 4904 4905 struct wcn36xx_hal_gtk_offload_get_info_req_msg { 4906 struct wcn36xx_hal_msg_header header; 4907 u8 bss_index; 4908 } __packed; 4909 4910 struct wcn36xx_hal_gtk_offload_get_info_rsp_msg { 4911 struct wcn36xx_hal_msg_header header; 4912 4913 /* success or failure */ 4914 u32 status; 4915 4916 /* last rekey status when the rekey was offloaded */ 4917 u32 last_rekey_status; 4918 4919 /* current replay counter value */ 4920 u64 key_replay_counter; 4921 4922 /* total rekey attempts */ 4923 u32 total_rekey_count; 4924 4925 /* successful GTK rekeys */ 4926 u32 gtk_rekey_count; 4927 4928 /* successful iGTK rekeys */ 4929 u32 igtk_rekey_count; 4930 4931 u8 bss_index; 4932 } __packed; 4933 4934 struct dhcp_info { 4935 /* Indicates the device mode which indicates about the DHCP activity */ 4936 u8 device_mode; 4937 4938 u8 addr[ETH_ALEN]; 4939 }; 4940 4941 struct dhcp_ind_status { 4942 struct wcn36xx_hal_msg_header header; 4943 4944 /* success or failure */ 4945 u32 status; 4946 }; 4947 4948 /* 4949 * Thermal Mitigation mode of operation. 4950 * 4951 * WCN36XX_HAL_THERMAL_MITIGATION_MODE_0 - Based on AMPDU disabling aggregation 4952 * 4953 * WCN36XX_HAL_THERMAL_MITIGATION_MODE_1 - Based on AMPDU disabling aggregation 4954 * and reducing transmit power 4955 * 4956 * WCN36XX_HAL_THERMAL_MITIGATION_MODE_2 - Not supported */ 4957 enum wcn36xx_hal_thermal_mitigation_mode_type { 4958 HAL_THERMAL_MITIGATION_MODE_INVALID = -1, 4959 HAL_THERMAL_MITIGATION_MODE_0, 4960 HAL_THERMAL_MITIGATION_MODE_1, 4961 HAL_THERMAL_MITIGATION_MODE_2, 4962 HAL_THERMAL_MITIGATION_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, 4963 }; 4964 4965 4966 /* 4967 * Thermal Mitigation level. 4968 * Note the levels are incremental i.e WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_2 = 4969 * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_0 + 4970 * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_1 4971 * 4972 * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_0 - lowest level of thermal mitigation. 4973 * This level indicates normal mode of operation 4974 * 4975 * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_1 - 1st level of thermal mitigation 4976 * 4977 * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_2 - 2nd level of thermal mitigation 4978 * 4979 * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_3 - 3rd level of thermal mitigation 4980 * 4981 * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_4 - 4th level of thermal mitigation 4982 */ 4983 enum wcn36xx_hal_thermal_mitigation_level_type { 4984 HAL_THERMAL_MITIGATION_LEVEL_INVALID = -1, 4985 HAL_THERMAL_MITIGATION_LEVEL_0, 4986 HAL_THERMAL_MITIGATION_LEVEL_1, 4987 HAL_THERMAL_MITIGATION_LEVEL_2, 4988 HAL_THERMAL_MITIGATION_LEVEL_3, 4989 HAL_THERMAL_MITIGATION_LEVEL_4, 4990 HAL_THERMAL_MITIGATION_LEVEL_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, 4991 }; 4992 4993 4994 /* WCN36XX_HAL_SET_THERMAL_MITIGATION_REQ */ 4995 struct set_thermal_mitigation_req_msg { 4996 struct wcn36xx_hal_msg_header header; 4997 4998 /* Thermal Mitigation Operation Mode */ 4999 enum wcn36xx_hal_thermal_mitigation_mode_type mode; 5000 5001 /* Thermal Mitigation Level */ 5002 enum wcn36xx_hal_thermal_mitigation_level_type level; 5003 }; 5004 5005 struct set_thermal_mitigation_resp { 5006 5007 struct wcn36xx_hal_msg_header header; 5008 5009 /* status of the request */ 5010 u32 status; 5011 }; 5012 5013 /* Per STA Class B Statistics. Class B statistics are STA TX/RX stats 5014 * provided to FW from Host via periodic messages */ 5015 struct stats_class_b_ind { 5016 struct wcn36xx_hal_msg_header header; 5017 5018 /* Duration over which this stats was collected */ 5019 u32 duration; 5020 5021 /* Per STA Stats */ 5022 5023 /* TX stats */ 5024 u32 tx_bytes_pushed; 5025 u32 tx_packets_pushed; 5026 5027 /* RX stats */ 5028 u32 rx_bytes_rcvd; 5029 u32 rx_packets_rcvd; 5030 u32 rx_time_total; 5031 }; 5032 5033 /* WCN36XX_HAL_PRINT_REG_INFO_IND */ 5034 struct wcn36xx_hal_print_reg_info_ind { 5035 struct wcn36xx_hal_msg_header header; 5036 5037 u32 count; 5038 u32 scenario; 5039 u32 reason; 5040 5041 struct { 5042 u32 addr; 5043 u32 value; 5044 } regs[]; 5045 } __packed; 5046 5047 #endif /* _HAL_H_ */ 5048