1 /* 2 * Atheros CARL9170 driver 3 * 4 * USB - frontend 5 * 6 * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> 7 * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; see the file COPYING. If not, see 21 * http://www.gnu.org/licenses/. 22 * 23 * This file incorporates work covered by the following copyright and 24 * permission notice: 25 * Copyright (c) 2007-2008 Atheros Communications, Inc. 26 * 27 * Permission to use, copy, modify, and/or distribute this software for any 28 * purpose with or without fee is hereby granted, provided that the above 29 * copyright notice and this permission notice appear in all copies. 30 * 31 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 32 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 33 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 34 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 35 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 36 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 37 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 38 */ 39 40 #include <linux/module.h> 41 #include <linux/slab.h> 42 #include <linux/usb.h> 43 #include <linux/firmware.h> 44 #include <linux/etherdevice.h> 45 #include <linux/device.h> 46 #include <net/mac80211.h> 47 #include "carl9170.h" 48 #include "cmd.h" 49 #include "hw.h" 50 #include "fwcmd.h" 51 52 MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); 53 MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>"); 54 MODULE_LICENSE("GPL"); 55 MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless"); 56 MODULE_FIRMWARE(CARL9170FW_NAME); 57 MODULE_ALIAS("ar9170usb"); 58 MODULE_ALIAS("arusb_lnx"); 59 60 /* 61 * Note: 62 * 63 * Always update our wiki's device list (located at: 64 * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ), 65 * whenever you add a new device. 66 */ 67 static const struct usb_device_id carl9170_usb_ids[] = { 68 /* Atheros 9170 */ 69 { USB_DEVICE(0x0cf3, 0x9170) }, 70 /* Atheros TG121N */ 71 { USB_DEVICE(0x0cf3, 0x1001) }, 72 /* TP-Link TL-WN821N v2 */ 73 { USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON | 74 CARL9170_ONE_LED }, 75 /* 3Com Dual Band 802.11n USB Adapter */ 76 { USB_DEVICE(0x0cf3, 0x1010) }, 77 /* H3C Dual Band 802.11n USB Adapter */ 78 { USB_DEVICE(0x0cf3, 0x1011) }, 79 /* Cace Airpcap NX */ 80 { USB_DEVICE(0xcace, 0x0300) }, 81 /* D-Link DWA 160 A1 */ 82 { USB_DEVICE(0x07d1, 0x3c10) }, 83 /* D-Link DWA 160 A2 */ 84 { USB_DEVICE(0x07d1, 0x3a09) }, 85 /* D-Link DWA 130 D */ 86 { USB_DEVICE(0x07d1, 0x3a0f) }, 87 /* Netgear WNA1000 */ 88 { USB_DEVICE(0x0846, 0x9040) }, 89 /* Netgear WNDA3100 (v1) */ 90 { USB_DEVICE(0x0846, 0x9010) }, 91 /* Netgear WN111 v2 */ 92 { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED }, 93 /* Zydas ZD1221 */ 94 { USB_DEVICE(0x0ace, 0x1221) }, 95 /* Proxim ORiNOCO 802.11n USB */ 96 { USB_DEVICE(0x1435, 0x0804) }, 97 /* WNC Generic 11n USB Dongle */ 98 { USB_DEVICE(0x1435, 0x0326) }, 99 /* ZyXEL NWD271N */ 100 { USB_DEVICE(0x0586, 0x3417) }, 101 /* Z-Com UB81 BG */ 102 { USB_DEVICE(0x0cde, 0x0023) }, 103 /* Z-Com UB82 ABG */ 104 { USB_DEVICE(0x0cde, 0x0026) }, 105 /* Sphairon Homelink 1202 */ 106 { USB_DEVICE(0x0cde, 0x0027) }, 107 /* Arcadyan WN7512 */ 108 { USB_DEVICE(0x083a, 0xf522) }, 109 /* Planex GWUS300 */ 110 { USB_DEVICE(0x2019, 0x5304) }, 111 /* IO-Data WNGDNUS2 */ 112 { USB_DEVICE(0x04bb, 0x093f) }, 113 /* NEC WL300NU-G */ 114 { USB_DEVICE(0x0409, 0x0249) }, 115 /* NEC WL300NU-AG */ 116 { USB_DEVICE(0x0409, 0x02b4) }, 117 /* AVM FRITZ!WLAN USB Stick N */ 118 { USB_DEVICE(0x057c, 0x8401) }, 119 /* AVM FRITZ!WLAN USB Stick N 2.4 */ 120 { USB_DEVICE(0x057c, 0x8402) }, 121 /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */ 122 { USB_DEVICE(0x1668, 0x1200) }, 123 /* Airlive X.USB a/b/g/n */ 124 { USB_DEVICE(0x1b75, 0x9170) }, 125 126 /* terminate */ 127 {} 128 }; 129 MODULE_DEVICE_TABLE(usb, carl9170_usb_ids); 130 131 static struct usb_driver carl9170_driver; 132 133 static void carl9170_usb_submit_data_urb(struct ar9170 *ar) 134 { 135 struct urb *urb; 136 int err; 137 138 if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS) 139 goto err_acc; 140 141 urb = usb_get_from_anchor(&ar->tx_wait); 142 if (!urb) 143 goto err_acc; 144 145 usb_anchor_urb(urb, &ar->tx_anch); 146 147 err = usb_submit_urb(urb, GFP_ATOMIC); 148 if (unlikely(err)) { 149 if (net_ratelimit()) { 150 dev_err(&ar->udev->dev, "tx submit failed (%d)\n", 151 urb->status); 152 } 153 154 usb_unanchor_urb(urb); 155 usb_anchor_urb(urb, &ar->tx_err); 156 } 157 158 usb_free_urb(urb); 159 160 if (likely(err == 0)) 161 return; 162 163 err_acc: 164 atomic_dec(&ar->tx_anch_urbs); 165 } 166 167 static void carl9170_usb_tx_data_complete(struct urb *urb) 168 { 169 struct ar9170 *ar = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); 170 171 if (WARN_ON_ONCE(!ar)) { 172 dev_kfree_skb_irq(urb->context); 173 return; 174 } 175 176 atomic_dec(&ar->tx_anch_urbs); 177 178 switch (urb->status) { 179 /* everything is fine */ 180 case 0: 181 carl9170_tx_callback(ar, (void *)urb->context); 182 break; 183 184 /* disconnect */ 185 case -ENOENT: 186 case -ECONNRESET: 187 case -ENODEV: 188 case -ESHUTDOWN: 189 /* 190 * Defer the frame clean-up to the tasklet worker. 191 * This is necessary, because carl9170_tx_drop 192 * does not work in an irqsave context. 193 */ 194 usb_anchor_urb(urb, &ar->tx_err); 195 return; 196 197 /* a random transmission error has occurred? */ 198 default: 199 if (net_ratelimit()) { 200 dev_err(&ar->udev->dev, "tx failed (%d)\n", 201 urb->status); 202 } 203 204 usb_anchor_urb(urb, &ar->tx_err); 205 break; 206 } 207 208 if (likely(IS_STARTED(ar))) 209 carl9170_usb_submit_data_urb(ar); 210 } 211 212 static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar) 213 { 214 struct urb *urb; 215 int err; 216 217 if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) { 218 atomic_dec(&ar->tx_cmd_urbs); 219 return 0; 220 } 221 222 urb = usb_get_from_anchor(&ar->tx_cmd); 223 if (!urb) { 224 atomic_dec(&ar->tx_cmd_urbs); 225 return 0; 226 } 227 228 usb_anchor_urb(urb, &ar->tx_anch); 229 err = usb_submit_urb(urb, GFP_ATOMIC); 230 if (unlikely(err)) { 231 usb_unanchor_urb(urb); 232 atomic_dec(&ar->tx_cmd_urbs); 233 } 234 usb_free_urb(urb); 235 236 return err; 237 } 238 239 static void carl9170_usb_cmd_complete(struct urb *urb) 240 { 241 struct ar9170 *ar = urb->context; 242 int err = 0; 243 244 if (WARN_ON_ONCE(!ar)) 245 return; 246 247 atomic_dec(&ar->tx_cmd_urbs); 248 249 switch (urb->status) { 250 /* everything is fine */ 251 case 0: 252 break; 253 254 /* disconnect */ 255 case -ENOENT: 256 case -ECONNRESET: 257 case -ENODEV: 258 case -ESHUTDOWN: 259 return; 260 261 default: 262 err = urb->status; 263 break; 264 } 265 266 if (!IS_INITIALIZED(ar)) 267 return; 268 269 if (err) 270 dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err); 271 272 err = carl9170_usb_submit_cmd_urb(ar); 273 if (err) 274 dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err); 275 } 276 277 static void carl9170_usb_rx_irq_complete(struct urb *urb) 278 { 279 struct ar9170 *ar = urb->context; 280 281 if (WARN_ON_ONCE(!ar)) 282 return; 283 284 switch (urb->status) { 285 /* everything is fine */ 286 case 0: 287 break; 288 289 /* disconnect */ 290 case -ENOENT: 291 case -ECONNRESET: 292 case -ENODEV: 293 case -ESHUTDOWN: 294 return; 295 296 default: 297 goto resubmit; 298 } 299 300 /* 301 * While the carl9170 firmware does not use this EP, the 302 * firmware loader in the EEPROM unfortunately does. 303 * Therefore we need to be ready to handle out-of-band 304 * responses and traps in case the firmware crashed and 305 * the loader took over again. 306 */ 307 carl9170_handle_command_response(ar, urb->transfer_buffer, 308 urb->actual_length); 309 310 resubmit: 311 usb_anchor_urb(urb, &ar->rx_anch); 312 if (unlikely(usb_submit_urb(urb, GFP_ATOMIC))) 313 usb_unanchor_urb(urb); 314 } 315 316 static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp) 317 { 318 struct urb *urb; 319 int err = 0, runs = 0; 320 321 while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) && 322 (runs++ < AR9170_NUM_RX_URBS)) { 323 err = -ENOSPC; 324 urb = usb_get_from_anchor(&ar->rx_pool); 325 if (urb) { 326 usb_anchor_urb(urb, &ar->rx_anch); 327 err = usb_submit_urb(urb, gfp); 328 if (unlikely(err)) { 329 usb_unanchor_urb(urb); 330 usb_anchor_urb(urb, &ar->rx_pool); 331 } else { 332 atomic_dec(&ar->rx_pool_urbs); 333 atomic_inc(&ar->rx_anch_urbs); 334 } 335 usb_free_urb(urb); 336 } 337 } 338 339 return err; 340 } 341 342 static void carl9170_usb_rx_work(struct ar9170 *ar) 343 { 344 struct urb *urb; 345 int i; 346 347 for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { 348 urb = usb_get_from_anchor(&ar->rx_work); 349 if (!urb) 350 break; 351 352 atomic_dec(&ar->rx_work_urbs); 353 if (IS_INITIALIZED(ar)) { 354 carl9170_rx(ar, urb->transfer_buffer, 355 urb->actual_length); 356 } 357 358 usb_anchor_urb(urb, &ar->rx_pool); 359 atomic_inc(&ar->rx_pool_urbs); 360 361 usb_free_urb(urb); 362 363 carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); 364 } 365 } 366 367 void carl9170_usb_handle_tx_err(struct ar9170 *ar) 368 { 369 struct urb *urb; 370 371 while ((urb = usb_get_from_anchor(&ar->tx_err))) { 372 struct sk_buff *skb = (void *)urb->context; 373 374 carl9170_tx_drop(ar, skb); 375 carl9170_tx_callback(ar, skb); 376 usb_free_urb(urb); 377 } 378 } 379 380 static void carl9170_usb_tasklet(unsigned long data) 381 { 382 struct ar9170 *ar = (struct ar9170 *) data; 383 384 if (!IS_INITIALIZED(ar)) 385 return; 386 387 carl9170_usb_rx_work(ar); 388 389 /* 390 * Strictly speaking: The tx scheduler is not part of the USB system. 391 * But the rx worker returns frames back to the mac80211-stack and 392 * this is the _perfect_ place to generate the next transmissions. 393 */ 394 if (IS_STARTED(ar)) 395 carl9170_tx_scheduler(ar); 396 } 397 398 static void carl9170_usb_rx_complete(struct urb *urb) 399 { 400 struct ar9170 *ar = (struct ar9170 *)urb->context; 401 int err; 402 403 if (WARN_ON_ONCE(!ar)) 404 return; 405 406 atomic_dec(&ar->rx_anch_urbs); 407 408 switch (urb->status) { 409 case 0: 410 /* rx path */ 411 usb_anchor_urb(urb, &ar->rx_work); 412 atomic_inc(&ar->rx_work_urbs); 413 break; 414 415 case -ENOENT: 416 case -ECONNRESET: 417 case -ENODEV: 418 case -ESHUTDOWN: 419 /* handle disconnect events*/ 420 return; 421 422 default: 423 /* handle all other errors */ 424 usb_anchor_urb(urb, &ar->rx_pool); 425 atomic_inc(&ar->rx_pool_urbs); 426 break; 427 } 428 429 err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); 430 if (unlikely(err)) { 431 /* 432 * usb_submit_rx_urb reported a problem. 433 * In case this is due to a rx buffer shortage, 434 * elevate the tasklet worker priority to 435 * the highest available level. 436 */ 437 tasklet_hi_schedule(&ar->usb_tasklet); 438 439 if (atomic_read(&ar->rx_anch_urbs) == 0) { 440 /* 441 * The system is too slow to cope with 442 * the enormous workload. We have simply 443 * run out of active rx urbs and this 444 * unfortunately leads to an unpredictable 445 * device. 446 */ 447 448 ieee80211_queue_work(ar->hw, &ar->ping_work); 449 } 450 } else { 451 /* 452 * Using anything less than _high_ priority absolutely 453 * kills the rx performance my UP-System... 454 */ 455 tasklet_hi_schedule(&ar->usb_tasklet); 456 } 457 } 458 459 static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp) 460 { 461 struct urb *urb; 462 void *buf; 463 464 buf = kmalloc(ar->fw.rx_size, gfp); 465 if (!buf) 466 return NULL; 467 468 urb = usb_alloc_urb(0, gfp); 469 if (!urb) { 470 kfree(buf); 471 return NULL; 472 } 473 474 usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev, 475 AR9170_USB_EP_RX), buf, ar->fw.rx_size, 476 carl9170_usb_rx_complete, ar); 477 478 urb->transfer_flags |= URB_FREE_BUFFER; 479 480 return urb; 481 } 482 483 static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar) 484 { 485 struct urb *urb = NULL; 486 void *ibuf; 487 int err = -ENOMEM; 488 489 urb = usb_alloc_urb(0, GFP_KERNEL); 490 if (!urb) 491 goto out; 492 493 ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL); 494 if (!ibuf) 495 goto out; 496 497 usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev, 498 AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX, 499 carl9170_usb_rx_irq_complete, ar, 1); 500 501 urb->transfer_flags |= URB_FREE_BUFFER; 502 503 usb_anchor_urb(urb, &ar->rx_anch); 504 err = usb_submit_urb(urb, GFP_KERNEL); 505 if (err) 506 usb_unanchor_urb(urb); 507 508 out: 509 usb_free_urb(urb); 510 return err; 511 } 512 513 static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar) 514 { 515 struct urb *urb; 516 int i, err = -EINVAL; 517 518 /* 519 * The driver actively maintains a second shadow 520 * pool for inactive, but fully-prepared rx urbs. 521 * 522 * The pool should help the driver to master huge 523 * workload spikes without running the risk of 524 * undersupplying the hardware or wasting time by 525 * processing rx data (streams) inside the urb 526 * completion (hardirq context). 527 */ 528 for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { 529 urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL); 530 if (!urb) { 531 err = -ENOMEM; 532 goto err_out; 533 } 534 535 usb_anchor_urb(urb, &ar->rx_pool); 536 atomic_inc(&ar->rx_pool_urbs); 537 usb_free_urb(urb); 538 } 539 540 err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL); 541 if (err) 542 goto err_out; 543 544 /* the device now waiting for the firmware. */ 545 carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); 546 return 0; 547 548 err_out: 549 550 usb_scuttle_anchored_urbs(&ar->rx_pool); 551 usb_scuttle_anchored_urbs(&ar->rx_work); 552 usb_kill_anchored_urbs(&ar->rx_anch); 553 return err; 554 } 555 556 static int carl9170_usb_flush(struct ar9170 *ar) 557 { 558 struct urb *urb; 559 int ret, err = 0; 560 561 while ((urb = usb_get_from_anchor(&ar->tx_wait))) { 562 struct sk_buff *skb = (void *)urb->context; 563 carl9170_tx_drop(ar, skb); 564 carl9170_tx_callback(ar, skb); 565 usb_free_urb(urb); 566 } 567 568 ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000); 569 if (ret == 0) 570 err = -ETIMEDOUT; 571 572 /* lets wait a while until the tx - queues are dried out */ 573 ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000); 574 if (ret == 0) 575 err = -ETIMEDOUT; 576 577 usb_kill_anchored_urbs(&ar->tx_anch); 578 carl9170_usb_handle_tx_err(ar); 579 580 return err; 581 } 582 583 static void carl9170_usb_cancel_urbs(struct ar9170 *ar) 584 { 585 int err; 586 587 carl9170_set_state(ar, CARL9170_UNKNOWN_STATE); 588 589 err = carl9170_usb_flush(ar); 590 if (err) 591 dev_err(&ar->udev->dev, "stuck tx urbs!\n"); 592 593 usb_poison_anchored_urbs(&ar->tx_anch); 594 carl9170_usb_handle_tx_err(ar); 595 usb_poison_anchored_urbs(&ar->rx_anch); 596 597 tasklet_kill(&ar->usb_tasklet); 598 599 usb_scuttle_anchored_urbs(&ar->rx_work); 600 usb_scuttle_anchored_urbs(&ar->rx_pool); 601 usb_scuttle_anchored_urbs(&ar->tx_cmd); 602 } 603 604 int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd, 605 const bool free_buf) 606 { 607 struct urb *urb; 608 int err = 0; 609 610 if (!IS_INITIALIZED(ar)) { 611 err = -EPERM; 612 goto err_free; 613 } 614 615 if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4)) { 616 err = -EINVAL; 617 goto err_free; 618 } 619 620 urb = usb_alloc_urb(0, GFP_ATOMIC); 621 if (!urb) { 622 err = -ENOMEM; 623 goto err_free; 624 } 625 626 if (ar->usb_ep_cmd_is_bulk) 627 usb_fill_bulk_urb(urb, ar->udev, 628 usb_sndbulkpipe(ar->udev, AR9170_USB_EP_CMD), 629 cmd, cmd->hdr.len + 4, 630 carl9170_usb_cmd_complete, ar); 631 else 632 usb_fill_int_urb(urb, ar->udev, 633 usb_sndintpipe(ar->udev, AR9170_USB_EP_CMD), 634 cmd, cmd->hdr.len + 4, 635 carl9170_usb_cmd_complete, ar, 1); 636 637 if (free_buf) 638 urb->transfer_flags |= URB_FREE_BUFFER; 639 640 usb_anchor_urb(urb, &ar->tx_cmd); 641 usb_free_urb(urb); 642 643 return carl9170_usb_submit_cmd_urb(ar); 644 645 err_free: 646 if (free_buf) 647 kfree(cmd); 648 649 return err; 650 } 651 652 int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd, 653 unsigned int plen, void *payload, unsigned int outlen, void *out) 654 { 655 int err = -ENOMEM; 656 unsigned long time_left; 657 658 if (!IS_ACCEPTING_CMD(ar)) 659 return -EIO; 660 661 if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) 662 might_sleep(); 663 664 ar->cmd.hdr.len = plen; 665 ar->cmd.hdr.cmd = cmd; 666 /* writing multiple regs fills this buffer already */ 667 if (plen && payload != (u8 *)(ar->cmd.data)) 668 memcpy(ar->cmd.data, payload, plen); 669 670 spin_lock_bh(&ar->cmd_lock); 671 ar->readbuf = (u8 *)out; 672 ar->readlen = outlen; 673 spin_unlock_bh(&ar->cmd_lock); 674 675 reinit_completion(&ar->cmd_wait); 676 err = __carl9170_exec_cmd(ar, &ar->cmd, false); 677 678 if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) { 679 time_left = wait_for_completion_timeout(&ar->cmd_wait, HZ); 680 if (time_left == 0) { 681 err = -ETIMEDOUT; 682 goto err_unbuf; 683 } 684 685 if (ar->readlen != outlen) { 686 err = -EMSGSIZE; 687 goto err_unbuf; 688 } 689 } 690 691 return 0; 692 693 err_unbuf: 694 /* Maybe the device was removed in the moment we were waiting? */ 695 if (IS_STARTED(ar)) { 696 dev_err(&ar->udev->dev, "no command feedback " 697 "received (%d).\n", err); 698 699 /* provide some maybe useful debug information */ 700 print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE, 701 &ar->cmd, plen + 4); 702 703 carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT); 704 } 705 706 /* invalidate to avoid completing the next command prematurely */ 707 spin_lock_bh(&ar->cmd_lock); 708 ar->readbuf = NULL; 709 ar->readlen = 0; 710 spin_unlock_bh(&ar->cmd_lock); 711 712 return err; 713 } 714 715 void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb) 716 { 717 struct urb *urb; 718 struct ar9170_stream *tx_stream; 719 void *data; 720 unsigned int len; 721 722 if (!IS_STARTED(ar)) 723 goto err_drop; 724 725 urb = usb_alloc_urb(0, GFP_ATOMIC); 726 if (!urb) 727 goto err_drop; 728 729 if (ar->fw.tx_stream) { 730 tx_stream = (void *) (skb->data - sizeof(*tx_stream)); 731 732 len = skb->len + sizeof(*tx_stream); 733 tx_stream->length = cpu_to_le16(len); 734 tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG); 735 data = tx_stream; 736 } else { 737 data = skb->data; 738 len = skb->len; 739 } 740 741 usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev, 742 AR9170_USB_EP_TX), data, len, 743 carl9170_usb_tx_data_complete, skb); 744 745 urb->transfer_flags |= URB_ZERO_PACKET; 746 747 usb_anchor_urb(urb, &ar->tx_wait); 748 749 usb_free_urb(urb); 750 751 carl9170_usb_submit_data_urb(ar); 752 return; 753 754 err_drop: 755 carl9170_tx_drop(ar, skb); 756 carl9170_tx_callback(ar, skb); 757 } 758 759 static void carl9170_release_firmware(struct ar9170 *ar) 760 { 761 if (ar->fw.fw) { 762 release_firmware(ar->fw.fw); 763 memset(&ar->fw, 0, sizeof(ar->fw)); 764 } 765 } 766 767 void carl9170_usb_stop(struct ar9170 *ar) 768 { 769 int ret; 770 771 carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED); 772 773 ret = carl9170_usb_flush(ar); 774 if (ret) 775 dev_err(&ar->udev->dev, "kill pending tx urbs.\n"); 776 777 usb_poison_anchored_urbs(&ar->tx_anch); 778 carl9170_usb_handle_tx_err(ar); 779 780 /* kill any pending command */ 781 spin_lock_bh(&ar->cmd_lock); 782 ar->readlen = 0; 783 spin_unlock_bh(&ar->cmd_lock); 784 complete(&ar->cmd_wait); 785 786 /* 787 * Note: 788 * So far we freed all tx urbs, but we won't dare to touch any rx urbs. 789 * Else we would end up with a unresponsive device... 790 */ 791 } 792 793 int carl9170_usb_open(struct ar9170 *ar) 794 { 795 usb_unpoison_anchored_urbs(&ar->tx_anch); 796 797 carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); 798 return 0; 799 } 800 801 static int carl9170_usb_load_firmware(struct ar9170 *ar) 802 { 803 const u8 *data; 804 u8 *buf; 805 unsigned int transfer; 806 size_t len; 807 u32 addr; 808 int err = 0; 809 810 buf = kmalloc(4096, GFP_KERNEL); 811 if (!buf) { 812 err = -ENOMEM; 813 goto err_out; 814 } 815 816 data = ar->fw.fw->data; 817 len = ar->fw.fw->size; 818 addr = ar->fw.address; 819 820 /* this removes the miniboot image */ 821 data += ar->fw.offset; 822 len -= ar->fw.offset; 823 824 while (len) { 825 transfer = min_t(unsigned int, len, 4096u); 826 memcpy(buf, data, transfer); 827 828 err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), 829 0x30 /* FW DL */, 0x40 | USB_DIR_OUT, 830 addr >> 8, 0, buf, transfer, 100); 831 832 if (err < 0) { 833 kfree(buf); 834 goto err_out; 835 } 836 837 len -= transfer; 838 data += transfer; 839 addr += transfer; 840 } 841 kfree(buf); 842 843 err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), 844 0x31 /* FW DL COMPLETE */, 845 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200); 846 847 if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) { 848 err = -ETIMEDOUT; 849 goto err_out; 850 } 851 852 err = carl9170_echo_test(ar, 0x4a110123); 853 if (err) 854 goto err_out; 855 856 /* now, start the command response counter */ 857 ar->cmd_seq = -1; 858 859 return 0; 860 861 err_out: 862 dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err); 863 return err; 864 } 865 866 int carl9170_usb_restart(struct ar9170 *ar) 867 { 868 int err = 0; 869 870 if (ar->intf->condition != USB_INTERFACE_BOUND) 871 return 0; 872 873 /* 874 * Disable the command response sequence counter check. 875 * We already know that the device/firmware is in a bad state. 876 * So, no extra points are awarded to anyone who reminds the 877 * driver about that. 878 */ 879 ar->cmd_seq = -2; 880 881 err = carl9170_reboot(ar); 882 883 carl9170_usb_stop(ar); 884 885 if (err) 886 goto err_out; 887 888 tasklet_schedule(&ar->usb_tasklet); 889 890 /* The reboot procedure can take quite a while to complete. */ 891 msleep(1100); 892 893 err = carl9170_usb_open(ar); 894 if (err) 895 goto err_out; 896 897 err = carl9170_usb_load_firmware(ar); 898 if (err) 899 goto err_out; 900 901 return 0; 902 903 err_out: 904 carl9170_usb_cancel_urbs(ar); 905 return err; 906 } 907 908 void carl9170_usb_reset(struct ar9170 *ar) 909 { 910 /* 911 * This is the last resort to get the device going again 912 * without any *user replugging action*. 913 * 914 * But there is a catch: usb_reset really is like a physical 915 * *reconnect*. The mac80211 state will be lost in the process. 916 * Therefore a userspace application, which is monitoring 917 * the link must step in. 918 */ 919 carl9170_usb_cancel_urbs(ar); 920 921 carl9170_usb_stop(ar); 922 923 usb_queue_reset_device(ar->intf); 924 } 925 926 static int carl9170_usb_init_device(struct ar9170 *ar) 927 { 928 int err; 929 930 /* 931 * The carl9170 firmware let's the driver know when it's 932 * ready for action. But we have to be prepared to gracefully 933 * handle all spurious [flushed] messages after each (re-)boot. 934 * Thus the command response counter remains disabled until it 935 * can be safely synchronized. 936 */ 937 ar->cmd_seq = -2; 938 939 err = carl9170_usb_send_rx_irq_urb(ar); 940 if (err) 941 goto err_out; 942 943 err = carl9170_usb_init_rx_bulk_urbs(ar); 944 if (err) 945 goto err_unrx; 946 947 err = carl9170_usb_open(ar); 948 if (err) 949 goto err_unrx; 950 951 mutex_lock(&ar->mutex); 952 err = carl9170_usb_load_firmware(ar); 953 mutex_unlock(&ar->mutex); 954 if (err) 955 goto err_stop; 956 957 return 0; 958 959 err_stop: 960 carl9170_usb_stop(ar); 961 962 err_unrx: 963 carl9170_usb_cancel_urbs(ar); 964 965 err_out: 966 return err; 967 } 968 969 static void carl9170_usb_firmware_failed(struct ar9170 *ar) 970 { 971 /* Store a copies of the usb_interface and usb_device pointer locally. 972 * This is because release_driver initiates carl9170_usb_disconnect, 973 * which in turn frees our driver context (ar). 974 */ 975 struct usb_interface *intf = ar->intf; 976 struct usb_device *udev = ar->udev; 977 978 complete(&ar->fw_load_wait); 979 /* at this point 'ar' could be already freed. Don't use it anymore */ 980 ar = NULL; 981 982 /* unbind anything failed */ 983 usb_lock_device(udev); 984 usb_driver_release_interface(&carl9170_driver, intf); 985 usb_unlock_device(udev); 986 987 usb_put_intf(intf); 988 } 989 990 static void carl9170_usb_firmware_finish(struct ar9170 *ar) 991 { 992 struct usb_interface *intf = ar->intf; 993 int err; 994 995 err = carl9170_parse_firmware(ar); 996 if (err) 997 goto err_freefw; 998 999 err = carl9170_usb_init_device(ar); 1000 if (err) 1001 goto err_freefw; 1002 1003 err = carl9170_register(ar); 1004 1005 carl9170_usb_stop(ar); 1006 if (err) 1007 goto err_unrx; 1008 1009 complete(&ar->fw_load_wait); 1010 usb_put_intf(intf); 1011 return; 1012 1013 err_unrx: 1014 carl9170_usb_cancel_urbs(ar); 1015 1016 err_freefw: 1017 carl9170_release_firmware(ar); 1018 carl9170_usb_firmware_failed(ar); 1019 } 1020 1021 static void carl9170_usb_firmware_step2(const struct firmware *fw, 1022 void *context) 1023 { 1024 struct ar9170 *ar = context; 1025 1026 if (fw) { 1027 ar->fw.fw = fw; 1028 carl9170_usb_firmware_finish(ar); 1029 return; 1030 } 1031 1032 dev_err(&ar->udev->dev, "firmware not found.\n"); 1033 carl9170_usb_firmware_failed(ar); 1034 } 1035 1036 static int carl9170_usb_probe(struct usb_interface *intf, 1037 const struct usb_device_id *id) 1038 { 1039 struct usb_endpoint_descriptor *ep; 1040 struct ar9170 *ar; 1041 struct usb_device *udev; 1042 int i, err; 1043 1044 err = usb_reset_device(interface_to_usbdev(intf)); 1045 if (err) 1046 return err; 1047 1048 ar = carl9170_alloc(sizeof(*ar)); 1049 if (IS_ERR(ar)) 1050 return PTR_ERR(ar); 1051 1052 udev = interface_to_usbdev(intf); 1053 ar->udev = udev; 1054 ar->intf = intf; 1055 ar->features = id->driver_info; 1056 1057 /* We need to remember the type of endpoint 4 because it differs 1058 * between high- and full-speed configuration. The high-speed 1059 * configuration specifies it as interrupt and the full-speed 1060 * configuration as bulk endpoint. This information is required 1061 * later when sending urbs to that endpoint. 1062 */ 1063 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; ++i) { 1064 ep = &intf->cur_altsetting->endpoint[i].desc; 1065 1066 if (usb_endpoint_num(ep) == AR9170_USB_EP_CMD && 1067 usb_endpoint_dir_out(ep) && 1068 usb_endpoint_type(ep) == USB_ENDPOINT_XFER_BULK) 1069 ar->usb_ep_cmd_is_bulk = true; 1070 } 1071 1072 usb_set_intfdata(intf, ar); 1073 SET_IEEE80211_DEV(ar->hw, &intf->dev); 1074 1075 init_usb_anchor(&ar->rx_anch); 1076 init_usb_anchor(&ar->rx_pool); 1077 init_usb_anchor(&ar->rx_work); 1078 init_usb_anchor(&ar->tx_wait); 1079 init_usb_anchor(&ar->tx_anch); 1080 init_usb_anchor(&ar->tx_cmd); 1081 init_usb_anchor(&ar->tx_err); 1082 init_completion(&ar->cmd_wait); 1083 init_completion(&ar->fw_boot_wait); 1084 init_completion(&ar->fw_load_wait); 1085 tasklet_init(&ar->usb_tasklet, carl9170_usb_tasklet, 1086 (unsigned long)ar); 1087 1088 atomic_set(&ar->tx_cmd_urbs, 0); 1089 atomic_set(&ar->tx_anch_urbs, 0); 1090 atomic_set(&ar->rx_work_urbs, 0); 1091 atomic_set(&ar->rx_anch_urbs, 0); 1092 atomic_set(&ar->rx_pool_urbs, 0); 1093 1094 usb_get_intf(intf); 1095 1096 carl9170_set_state(ar, CARL9170_STOPPED); 1097 1098 err = request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME, 1099 &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2); 1100 if (err) { 1101 usb_put_intf(intf); 1102 carl9170_free(ar); 1103 } 1104 return err; 1105 } 1106 1107 static void carl9170_usb_disconnect(struct usb_interface *intf) 1108 { 1109 struct ar9170 *ar = usb_get_intfdata(intf); 1110 struct usb_device *udev; 1111 1112 if (WARN_ON(!ar)) 1113 return; 1114 1115 udev = ar->udev; 1116 wait_for_completion(&ar->fw_load_wait); 1117 1118 if (IS_INITIALIZED(ar)) { 1119 carl9170_reboot(ar); 1120 carl9170_usb_stop(ar); 1121 } 1122 1123 carl9170_usb_cancel_urbs(ar); 1124 carl9170_unregister(ar); 1125 1126 usb_set_intfdata(intf, NULL); 1127 1128 carl9170_release_firmware(ar); 1129 carl9170_free(ar); 1130 } 1131 1132 #ifdef CONFIG_PM 1133 static int carl9170_usb_suspend(struct usb_interface *intf, 1134 pm_message_t message) 1135 { 1136 struct ar9170 *ar = usb_get_intfdata(intf); 1137 1138 if (!ar) 1139 return -ENODEV; 1140 1141 carl9170_usb_cancel_urbs(ar); 1142 1143 return 0; 1144 } 1145 1146 static int carl9170_usb_resume(struct usb_interface *intf) 1147 { 1148 struct ar9170 *ar = usb_get_intfdata(intf); 1149 int err; 1150 1151 if (!ar) 1152 return -ENODEV; 1153 1154 usb_unpoison_anchored_urbs(&ar->rx_anch); 1155 carl9170_set_state(ar, CARL9170_STOPPED); 1156 1157 /* 1158 * The USB documentation demands that [for suspend] all traffic 1159 * to and from the device has to stop. This would be fine, but 1160 * there's a catch: the device[usb phy] does not come back. 1161 * 1162 * Upon resume the firmware will "kill" itself and the 1163 * boot-code sorts out the magic voodoo. 1164 * Not very nice, but there's not much what could go wrong. 1165 */ 1166 msleep(1100); 1167 1168 err = carl9170_usb_init_device(ar); 1169 if (err) 1170 goto err_unrx; 1171 1172 return 0; 1173 1174 err_unrx: 1175 carl9170_usb_cancel_urbs(ar); 1176 1177 return err; 1178 } 1179 #endif /* CONFIG_PM */ 1180 1181 static struct usb_driver carl9170_driver = { 1182 .name = KBUILD_MODNAME, 1183 .probe = carl9170_usb_probe, 1184 .disconnect = carl9170_usb_disconnect, 1185 .id_table = carl9170_usb_ids, 1186 .soft_unbind = 1, 1187 #ifdef CONFIG_PM 1188 .suspend = carl9170_usb_suspend, 1189 .resume = carl9170_usb_resume, 1190 .reset_resume = carl9170_usb_resume, 1191 #endif /* CONFIG_PM */ 1192 .disable_hub_initiated_lpm = 1, 1193 }; 1194 1195 module_usb_driver(carl9170_driver); 1196