1 /* 2 * Atheros CARL9170 driver 3 * 4 * USB - frontend 5 * 6 * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> 7 * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; see the file COPYING. If not, see 21 * http://www.gnu.org/licenses/. 22 * 23 * This file incorporates work covered by the following copyright and 24 * permission notice: 25 * Copyright (c) 2007-2008 Atheros Communications, Inc. 26 * 27 * Permission to use, copy, modify, and/or distribute this software for any 28 * purpose with or without fee is hereby granted, provided that the above 29 * copyright notice and this permission notice appear in all copies. 30 * 31 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 32 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 33 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 34 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 35 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 36 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 37 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 38 */ 39 40 #include <linux/module.h> 41 #include <linux/slab.h> 42 #include <linux/usb.h> 43 #include <linux/firmware.h> 44 #include <linux/etherdevice.h> 45 #include <linux/device.h> 46 #include <net/mac80211.h> 47 #include "carl9170.h" 48 #include "cmd.h" 49 #include "hw.h" 50 #include "fwcmd.h" 51 52 MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); 53 MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>"); 54 MODULE_LICENSE("GPL"); 55 MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless"); 56 MODULE_FIRMWARE(CARL9170FW_NAME); 57 MODULE_ALIAS("ar9170usb"); 58 MODULE_ALIAS("arusb_lnx"); 59 60 /* 61 * Note: 62 * 63 * Always update our wiki's device list (located at: 64 * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ), 65 * whenever you add a new device. 66 */ 67 static struct usb_device_id carl9170_usb_ids[] = { 68 /* Atheros 9170 */ 69 { USB_DEVICE(0x0cf3, 0x9170) }, 70 /* Atheros TG121N */ 71 { USB_DEVICE(0x0cf3, 0x1001) }, 72 /* TP-Link TL-WN821N v2 */ 73 { USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON | 74 CARL9170_ONE_LED }, 75 /* 3Com Dual Band 802.11n USB Adapter */ 76 { USB_DEVICE(0x0cf3, 0x1010) }, 77 /* H3C Dual Band 802.11n USB Adapter */ 78 { USB_DEVICE(0x0cf3, 0x1011) }, 79 /* Cace Airpcap NX */ 80 { USB_DEVICE(0xcace, 0x0300) }, 81 /* D-Link DWA 160 A1 */ 82 { USB_DEVICE(0x07d1, 0x3c10) }, 83 /* D-Link DWA 160 A2 */ 84 { USB_DEVICE(0x07d1, 0x3a09) }, 85 /* D-Link DWA 130 D */ 86 { USB_DEVICE(0x07d1, 0x3a0f) }, 87 /* Netgear WNA1000 */ 88 { USB_DEVICE(0x0846, 0x9040) }, 89 /* Netgear WNDA3100 (v1) */ 90 { USB_DEVICE(0x0846, 0x9010) }, 91 /* Netgear WN111 v2 */ 92 { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED }, 93 /* Zydas ZD1221 */ 94 { USB_DEVICE(0x0ace, 0x1221) }, 95 /* Proxim ORiNOCO 802.11n USB */ 96 { USB_DEVICE(0x1435, 0x0804) }, 97 /* WNC Generic 11n USB Dongle */ 98 { USB_DEVICE(0x1435, 0x0326) }, 99 /* ZyXEL NWD271N */ 100 { USB_DEVICE(0x0586, 0x3417) }, 101 /* Z-Com UB81 BG */ 102 { USB_DEVICE(0x0cde, 0x0023) }, 103 /* Z-Com UB82 ABG */ 104 { USB_DEVICE(0x0cde, 0x0026) }, 105 /* Sphairon Homelink 1202 */ 106 { USB_DEVICE(0x0cde, 0x0027) }, 107 /* Arcadyan WN7512 */ 108 { USB_DEVICE(0x083a, 0xf522) }, 109 /* Planex GWUS300 */ 110 { USB_DEVICE(0x2019, 0x5304) }, 111 /* IO-Data WNGDNUS2 */ 112 { USB_DEVICE(0x04bb, 0x093f) }, 113 /* NEC WL300NU-G */ 114 { USB_DEVICE(0x0409, 0x0249) }, 115 /* NEC WL300NU-AG */ 116 { USB_DEVICE(0x0409, 0x02b4) }, 117 /* AVM FRITZ!WLAN USB Stick N */ 118 { USB_DEVICE(0x057c, 0x8401) }, 119 /* AVM FRITZ!WLAN USB Stick N 2.4 */ 120 { USB_DEVICE(0x057c, 0x8402) }, 121 /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */ 122 { USB_DEVICE(0x1668, 0x1200) }, 123 /* Airlive X.USB a/b/g/n */ 124 { USB_DEVICE(0x1b75, 0x9170) }, 125 126 /* terminate */ 127 {} 128 }; 129 MODULE_DEVICE_TABLE(usb, carl9170_usb_ids); 130 131 static void carl9170_usb_submit_data_urb(struct ar9170 *ar) 132 { 133 struct urb *urb; 134 int err; 135 136 if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS) 137 goto err_acc; 138 139 urb = usb_get_from_anchor(&ar->tx_wait); 140 if (!urb) 141 goto err_acc; 142 143 usb_anchor_urb(urb, &ar->tx_anch); 144 145 err = usb_submit_urb(urb, GFP_ATOMIC); 146 if (unlikely(err)) { 147 if (net_ratelimit()) { 148 dev_err(&ar->udev->dev, "tx submit failed (%d)\n", 149 urb->status); 150 } 151 152 usb_unanchor_urb(urb); 153 usb_anchor_urb(urb, &ar->tx_err); 154 } 155 156 usb_free_urb(urb); 157 158 if (likely(err == 0)) 159 return; 160 161 err_acc: 162 atomic_dec(&ar->tx_anch_urbs); 163 } 164 165 static void carl9170_usb_tx_data_complete(struct urb *urb) 166 { 167 struct ar9170 *ar = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); 168 169 if (WARN_ON_ONCE(!ar)) { 170 dev_kfree_skb_irq(urb->context); 171 return; 172 } 173 174 atomic_dec(&ar->tx_anch_urbs); 175 176 switch (urb->status) { 177 /* everything is fine */ 178 case 0: 179 carl9170_tx_callback(ar, (void *)urb->context); 180 break; 181 182 /* disconnect */ 183 case -ENOENT: 184 case -ECONNRESET: 185 case -ENODEV: 186 case -ESHUTDOWN: 187 /* 188 * Defer the frame clean-up to the tasklet worker. 189 * This is necessary, because carl9170_tx_drop 190 * does not work in an irqsave context. 191 */ 192 usb_anchor_urb(urb, &ar->tx_err); 193 return; 194 195 /* a random transmission error has occurred? */ 196 default: 197 if (net_ratelimit()) { 198 dev_err(&ar->udev->dev, "tx failed (%d)\n", 199 urb->status); 200 } 201 202 usb_anchor_urb(urb, &ar->tx_err); 203 break; 204 } 205 206 if (likely(IS_STARTED(ar))) 207 carl9170_usb_submit_data_urb(ar); 208 } 209 210 static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar) 211 { 212 struct urb *urb; 213 int err; 214 215 if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) { 216 atomic_dec(&ar->tx_cmd_urbs); 217 return 0; 218 } 219 220 urb = usb_get_from_anchor(&ar->tx_cmd); 221 if (!urb) { 222 atomic_dec(&ar->tx_cmd_urbs); 223 return 0; 224 } 225 226 usb_anchor_urb(urb, &ar->tx_anch); 227 err = usb_submit_urb(urb, GFP_ATOMIC); 228 if (unlikely(err)) { 229 usb_unanchor_urb(urb); 230 atomic_dec(&ar->tx_cmd_urbs); 231 } 232 usb_free_urb(urb); 233 234 return err; 235 } 236 237 static void carl9170_usb_cmd_complete(struct urb *urb) 238 { 239 struct ar9170 *ar = urb->context; 240 int err = 0; 241 242 if (WARN_ON_ONCE(!ar)) 243 return; 244 245 atomic_dec(&ar->tx_cmd_urbs); 246 247 switch (urb->status) { 248 /* everything is fine */ 249 case 0: 250 break; 251 252 /* disconnect */ 253 case -ENOENT: 254 case -ECONNRESET: 255 case -ENODEV: 256 case -ESHUTDOWN: 257 return; 258 259 default: 260 err = urb->status; 261 break; 262 } 263 264 if (!IS_INITIALIZED(ar)) 265 return; 266 267 if (err) 268 dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err); 269 270 err = carl9170_usb_submit_cmd_urb(ar); 271 if (err) 272 dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err); 273 } 274 275 static void carl9170_usb_rx_irq_complete(struct urb *urb) 276 { 277 struct ar9170 *ar = urb->context; 278 279 if (WARN_ON_ONCE(!ar)) 280 return; 281 282 switch (urb->status) { 283 /* everything is fine */ 284 case 0: 285 break; 286 287 /* disconnect */ 288 case -ENOENT: 289 case -ECONNRESET: 290 case -ENODEV: 291 case -ESHUTDOWN: 292 return; 293 294 default: 295 goto resubmit; 296 } 297 298 /* 299 * While the carl9170 firmware does not use this EP, the 300 * firmware loader in the EEPROM unfortunately does. 301 * Therefore we need to be ready to handle out-of-band 302 * responses and traps in case the firmware crashed and 303 * the loader took over again. 304 */ 305 carl9170_handle_command_response(ar, urb->transfer_buffer, 306 urb->actual_length); 307 308 resubmit: 309 usb_anchor_urb(urb, &ar->rx_anch); 310 if (unlikely(usb_submit_urb(urb, GFP_ATOMIC))) 311 usb_unanchor_urb(urb); 312 } 313 314 static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp) 315 { 316 struct urb *urb; 317 int err = 0, runs = 0; 318 319 while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) && 320 (runs++ < AR9170_NUM_RX_URBS)) { 321 err = -ENOSPC; 322 urb = usb_get_from_anchor(&ar->rx_pool); 323 if (urb) { 324 usb_anchor_urb(urb, &ar->rx_anch); 325 err = usb_submit_urb(urb, gfp); 326 if (unlikely(err)) { 327 usb_unanchor_urb(urb); 328 usb_anchor_urb(urb, &ar->rx_pool); 329 } else { 330 atomic_dec(&ar->rx_pool_urbs); 331 atomic_inc(&ar->rx_anch_urbs); 332 } 333 usb_free_urb(urb); 334 } 335 } 336 337 return err; 338 } 339 340 static void carl9170_usb_rx_work(struct ar9170 *ar) 341 { 342 struct urb *urb; 343 int i; 344 345 for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { 346 urb = usb_get_from_anchor(&ar->rx_work); 347 if (!urb) 348 break; 349 350 atomic_dec(&ar->rx_work_urbs); 351 if (IS_INITIALIZED(ar)) { 352 carl9170_rx(ar, urb->transfer_buffer, 353 urb->actual_length); 354 } 355 356 usb_anchor_urb(urb, &ar->rx_pool); 357 atomic_inc(&ar->rx_pool_urbs); 358 359 usb_free_urb(urb); 360 361 carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); 362 } 363 } 364 365 void carl9170_usb_handle_tx_err(struct ar9170 *ar) 366 { 367 struct urb *urb; 368 369 while ((urb = usb_get_from_anchor(&ar->tx_err))) { 370 struct sk_buff *skb = (void *)urb->context; 371 372 carl9170_tx_drop(ar, skb); 373 carl9170_tx_callback(ar, skb); 374 usb_free_urb(urb); 375 } 376 } 377 378 static void carl9170_usb_tasklet(unsigned long data) 379 { 380 struct ar9170 *ar = (struct ar9170 *) data; 381 382 if (!IS_INITIALIZED(ar)) 383 return; 384 385 carl9170_usb_rx_work(ar); 386 387 /* 388 * Strictly speaking: The tx scheduler is not part of the USB system. 389 * But the rx worker returns frames back to the mac80211-stack and 390 * this is the _perfect_ place to generate the next transmissions. 391 */ 392 if (IS_STARTED(ar)) 393 carl9170_tx_scheduler(ar); 394 } 395 396 static void carl9170_usb_rx_complete(struct urb *urb) 397 { 398 struct ar9170 *ar = (struct ar9170 *)urb->context; 399 int err; 400 401 if (WARN_ON_ONCE(!ar)) 402 return; 403 404 atomic_dec(&ar->rx_anch_urbs); 405 406 switch (urb->status) { 407 case 0: 408 /* rx path */ 409 usb_anchor_urb(urb, &ar->rx_work); 410 atomic_inc(&ar->rx_work_urbs); 411 break; 412 413 case -ENOENT: 414 case -ECONNRESET: 415 case -ENODEV: 416 case -ESHUTDOWN: 417 /* handle disconnect events*/ 418 return; 419 420 default: 421 /* handle all other errors */ 422 usb_anchor_urb(urb, &ar->rx_pool); 423 atomic_inc(&ar->rx_pool_urbs); 424 break; 425 } 426 427 err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); 428 if (unlikely(err)) { 429 /* 430 * usb_submit_rx_urb reported a problem. 431 * In case this is due to a rx buffer shortage, 432 * elevate the tasklet worker priority to 433 * the highest available level. 434 */ 435 tasklet_hi_schedule(&ar->usb_tasklet); 436 437 if (atomic_read(&ar->rx_anch_urbs) == 0) { 438 /* 439 * The system is too slow to cope with 440 * the enormous workload. We have simply 441 * run out of active rx urbs and this 442 * unfortunately leads to an unpredictable 443 * device. 444 */ 445 446 ieee80211_queue_work(ar->hw, &ar->ping_work); 447 } 448 } else { 449 /* 450 * Using anything less than _high_ priority absolutely 451 * kills the rx performance my UP-System... 452 */ 453 tasklet_hi_schedule(&ar->usb_tasklet); 454 } 455 } 456 457 static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp) 458 { 459 struct urb *urb; 460 void *buf; 461 462 buf = kmalloc(ar->fw.rx_size, gfp); 463 if (!buf) 464 return NULL; 465 466 urb = usb_alloc_urb(0, gfp); 467 if (!urb) { 468 kfree(buf); 469 return NULL; 470 } 471 472 usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev, 473 AR9170_USB_EP_RX), buf, ar->fw.rx_size, 474 carl9170_usb_rx_complete, ar); 475 476 urb->transfer_flags |= URB_FREE_BUFFER; 477 478 return urb; 479 } 480 481 static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar) 482 { 483 struct urb *urb = NULL; 484 void *ibuf; 485 int err = -ENOMEM; 486 487 urb = usb_alloc_urb(0, GFP_KERNEL); 488 if (!urb) 489 goto out; 490 491 ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL); 492 if (!ibuf) 493 goto out; 494 495 usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev, 496 AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX, 497 carl9170_usb_rx_irq_complete, ar, 1); 498 499 urb->transfer_flags |= URB_FREE_BUFFER; 500 501 usb_anchor_urb(urb, &ar->rx_anch); 502 err = usb_submit_urb(urb, GFP_KERNEL); 503 if (err) 504 usb_unanchor_urb(urb); 505 506 out: 507 usb_free_urb(urb); 508 return err; 509 } 510 511 static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar) 512 { 513 struct urb *urb; 514 int i, err = -EINVAL; 515 516 /* 517 * The driver actively maintains a second shadow 518 * pool for inactive, but fully-prepared rx urbs. 519 * 520 * The pool should help the driver to master huge 521 * workload spikes without running the risk of 522 * undersupplying the hardware or wasting time by 523 * processing rx data (streams) inside the urb 524 * completion (hardirq context). 525 */ 526 for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { 527 urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL); 528 if (!urb) { 529 err = -ENOMEM; 530 goto err_out; 531 } 532 533 usb_anchor_urb(urb, &ar->rx_pool); 534 atomic_inc(&ar->rx_pool_urbs); 535 usb_free_urb(urb); 536 } 537 538 err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL); 539 if (err) 540 goto err_out; 541 542 /* the device now waiting for the firmware. */ 543 carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); 544 return 0; 545 546 err_out: 547 548 usb_scuttle_anchored_urbs(&ar->rx_pool); 549 usb_scuttle_anchored_urbs(&ar->rx_work); 550 usb_kill_anchored_urbs(&ar->rx_anch); 551 return err; 552 } 553 554 static int carl9170_usb_flush(struct ar9170 *ar) 555 { 556 struct urb *urb; 557 int ret, err = 0; 558 559 while ((urb = usb_get_from_anchor(&ar->tx_wait))) { 560 struct sk_buff *skb = (void *)urb->context; 561 carl9170_tx_drop(ar, skb); 562 carl9170_tx_callback(ar, skb); 563 usb_free_urb(urb); 564 } 565 566 ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000); 567 if (ret == 0) 568 err = -ETIMEDOUT; 569 570 /* lets wait a while until the tx - queues are dried out */ 571 ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000); 572 if (ret == 0) 573 err = -ETIMEDOUT; 574 575 usb_kill_anchored_urbs(&ar->tx_anch); 576 carl9170_usb_handle_tx_err(ar); 577 578 return err; 579 } 580 581 static void carl9170_usb_cancel_urbs(struct ar9170 *ar) 582 { 583 int err; 584 585 carl9170_set_state(ar, CARL9170_UNKNOWN_STATE); 586 587 err = carl9170_usb_flush(ar); 588 if (err) 589 dev_err(&ar->udev->dev, "stuck tx urbs!\n"); 590 591 usb_poison_anchored_urbs(&ar->tx_anch); 592 carl9170_usb_handle_tx_err(ar); 593 usb_poison_anchored_urbs(&ar->rx_anch); 594 595 tasklet_kill(&ar->usb_tasklet); 596 597 usb_scuttle_anchored_urbs(&ar->rx_work); 598 usb_scuttle_anchored_urbs(&ar->rx_pool); 599 usb_scuttle_anchored_urbs(&ar->tx_cmd); 600 } 601 602 int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd, 603 const bool free_buf) 604 { 605 struct urb *urb; 606 int err = 0; 607 608 if (!IS_INITIALIZED(ar)) { 609 err = -EPERM; 610 goto err_free; 611 } 612 613 if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4)) { 614 err = -EINVAL; 615 goto err_free; 616 } 617 618 urb = usb_alloc_urb(0, GFP_ATOMIC); 619 if (!urb) { 620 err = -ENOMEM; 621 goto err_free; 622 } 623 624 usb_fill_int_urb(urb, ar->udev, usb_sndintpipe(ar->udev, 625 AR9170_USB_EP_CMD), cmd, cmd->hdr.len + 4, 626 carl9170_usb_cmd_complete, ar, 1); 627 628 if (free_buf) 629 urb->transfer_flags |= URB_FREE_BUFFER; 630 631 usb_anchor_urb(urb, &ar->tx_cmd); 632 usb_free_urb(urb); 633 634 return carl9170_usb_submit_cmd_urb(ar); 635 636 err_free: 637 if (free_buf) 638 kfree(cmd); 639 640 return err; 641 } 642 643 int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd, 644 unsigned int plen, void *payload, unsigned int outlen, void *out) 645 { 646 int err = -ENOMEM; 647 648 if (!IS_ACCEPTING_CMD(ar)) 649 return -EIO; 650 651 if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) 652 might_sleep(); 653 654 ar->cmd.hdr.len = plen; 655 ar->cmd.hdr.cmd = cmd; 656 /* writing multiple regs fills this buffer already */ 657 if (plen && payload != (u8 *)(ar->cmd.data)) 658 memcpy(ar->cmd.data, payload, plen); 659 660 spin_lock_bh(&ar->cmd_lock); 661 ar->readbuf = (u8 *)out; 662 ar->readlen = outlen; 663 spin_unlock_bh(&ar->cmd_lock); 664 665 err = __carl9170_exec_cmd(ar, &ar->cmd, false); 666 667 if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) { 668 err = wait_for_completion_timeout(&ar->cmd_wait, HZ); 669 if (err == 0) { 670 err = -ETIMEDOUT; 671 goto err_unbuf; 672 } 673 674 if (ar->readlen != outlen) { 675 err = -EMSGSIZE; 676 goto err_unbuf; 677 } 678 } 679 680 return 0; 681 682 err_unbuf: 683 /* Maybe the device was removed in the moment we were waiting? */ 684 if (IS_STARTED(ar)) { 685 dev_err(&ar->udev->dev, "no command feedback " 686 "received (%d).\n", err); 687 688 /* provide some maybe useful debug information */ 689 print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE, 690 &ar->cmd, plen + 4); 691 692 carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT); 693 } 694 695 /* invalidate to avoid completing the next command prematurely */ 696 spin_lock_bh(&ar->cmd_lock); 697 ar->readbuf = NULL; 698 ar->readlen = 0; 699 spin_unlock_bh(&ar->cmd_lock); 700 701 return err; 702 } 703 704 void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb) 705 { 706 struct urb *urb; 707 struct ar9170_stream *tx_stream; 708 void *data; 709 unsigned int len; 710 711 if (!IS_STARTED(ar)) 712 goto err_drop; 713 714 urb = usb_alloc_urb(0, GFP_ATOMIC); 715 if (!urb) 716 goto err_drop; 717 718 if (ar->fw.tx_stream) { 719 tx_stream = (void *) (skb->data - sizeof(*tx_stream)); 720 721 len = skb->len + sizeof(*tx_stream); 722 tx_stream->length = cpu_to_le16(len); 723 tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG); 724 data = tx_stream; 725 } else { 726 data = skb->data; 727 len = skb->len; 728 } 729 730 usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev, 731 AR9170_USB_EP_TX), data, len, 732 carl9170_usb_tx_data_complete, skb); 733 734 urb->transfer_flags |= URB_ZERO_PACKET; 735 736 usb_anchor_urb(urb, &ar->tx_wait); 737 738 usb_free_urb(urb); 739 740 carl9170_usb_submit_data_urb(ar); 741 return; 742 743 err_drop: 744 carl9170_tx_drop(ar, skb); 745 carl9170_tx_callback(ar, skb); 746 } 747 748 static void carl9170_release_firmware(struct ar9170 *ar) 749 { 750 if (ar->fw.fw) { 751 release_firmware(ar->fw.fw); 752 memset(&ar->fw, 0, sizeof(ar->fw)); 753 } 754 } 755 756 void carl9170_usb_stop(struct ar9170 *ar) 757 { 758 int ret; 759 760 carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED); 761 762 ret = carl9170_usb_flush(ar); 763 if (ret) 764 dev_err(&ar->udev->dev, "kill pending tx urbs.\n"); 765 766 usb_poison_anchored_urbs(&ar->tx_anch); 767 carl9170_usb_handle_tx_err(ar); 768 769 /* kill any pending command */ 770 spin_lock_bh(&ar->cmd_lock); 771 ar->readlen = 0; 772 spin_unlock_bh(&ar->cmd_lock); 773 complete_all(&ar->cmd_wait); 774 775 /* This is required to prevent an early completion on _start */ 776 reinit_completion(&ar->cmd_wait); 777 778 /* 779 * Note: 780 * So far we freed all tx urbs, but we won't dare to touch any rx urbs. 781 * Else we would end up with a unresponsive device... 782 */ 783 } 784 785 int carl9170_usb_open(struct ar9170 *ar) 786 { 787 usb_unpoison_anchored_urbs(&ar->tx_anch); 788 789 carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); 790 return 0; 791 } 792 793 static int carl9170_usb_load_firmware(struct ar9170 *ar) 794 { 795 const u8 *data; 796 u8 *buf; 797 unsigned int transfer; 798 size_t len; 799 u32 addr; 800 int err = 0; 801 802 buf = kmalloc(4096, GFP_KERNEL); 803 if (!buf) { 804 err = -ENOMEM; 805 goto err_out; 806 } 807 808 data = ar->fw.fw->data; 809 len = ar->fw.fw->size; 810 addr = ar->fw.address; 811 812 /* this removes the miniboot image */ 813 data += ar->fw.offset; 814 len -= ar->fw.offset; 815 816 while (len) { 817 transfer = min_t(unsigned int, len, 4096u); 818 memcpy(buf, data, transfer); 819 820 err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), 821 0x30 /* FW DL */, 0x40 | USB_DIR_OUT, 822 addr >> 8, 0, buf, transfer, 100); 823 824 if (err < 0) { 825 kfree(buf); 826 goto err_out; 827 } 828 829 len -= transfer; 830 data += transfer; 831 addr += transfer; 832 } 833 kfree(buf); 834 835 err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), 836 0x31 /* FW DL COMPLETE */, 837 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200); 838 839 if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) { 840 err = -ETIMEDOUT; 841 goto err_out; 842 } 843 844 err = carl9170_echo_test(ar, 0x4a110123); 845 if (err) 846 goto err_out; 847 848 /* now, start the command response counter */ 849 ar->cmd_seq = -1; 850 851 return 0; 852 853 err_out: 854 dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err); 855 return err; 856 } 857 858 int carl9170_usb_restart(struct ar9170 *ar) 859 { 860 int err = 0; 861 862 if (ar->intf->condition != USB_INTERFACE_BOUND) 863 return 0; 864 865 /* 866 * Disable the command response sequence counter check. 867 * We already know that the device/firmware is in a bad state. 868 * So, no extra points are awarded to anyone who reminds the 869 * driver about that. 870 */ 871 ar->cmd_seq = -2; 872 873 err = carl9170_reboot(ar); 874 875 carl9170_usb_stop(ar); 876 877 if (err) 878 goto err_out; 879 880 tasklet_schedule(&ar->usb_tasklet); 881 882 /* The reboot procedure can take quite a while to complete. */ 883 msleep(1100); 884 885 err = carl9170_usb_open(ar); 886 if (err) 887 goto err_out; 888 889 err = carl9170_usb_load_firmware(ar); 890 if (err) 891 goto err_out; 892 893 return 0; 894 895 err_out: 896 carl9170_usb_cancel_urbs(ar); 897 return err; 898 } 899 900 void carl9170_usb_reset(struct ar9170 *ar) 901 { 902 /* 903 * This is the last resort to get the device going again 904 * without any *user replugging action*. 905 * 906 * But there is a catch: usb_reset really is like a physical 907 * *reconnect*. The mac80211 state will be lost in the process. 908 * Therefore a userspace application, which is monitoring 909 * the link must step in. 910 */ 911 carl9170_usb_cancel_urbs(ar); 912 913 carl9170_usb_stop(ar); 914 915 usb_queue_reset_device(ar->intf); 916 } 917 918 static int carl9170_usb_init_device(struct ar9170 *ar) 919 { 920 int err; 921 922 /* 923 * The carl9170 firmware let's the driver know when it's 924 * ready for action. But we have to be prepared to gracefully 925 * handle all spurious [flushed] messages after each (re-)boot. 926 * Thus the command response counter remains disabled until it 927 * can be safely synchronized. 928 */ 929 ar->cmd_seq = -2; 930 931 err = carl9170_usb_send_rx_irq_urb(ar); 932 if (err) 933 goto err_out; 934 935 err = carl9170_usb_init_rx_bulk_urbs(ar); 936 if (err) 937 goto err_unrx; 938 939 err = carl9170_usb_open(ar); 940 if (err) 941 goto err_unrx; 942 943 mutex_lock(&ar->mutex); 944 err = carl9170_usb_load_firmware(ar); 945 mutex_unlock(&ar->mutex); 946 if (err) 947 goto err_stop; 948 949 return 0; 950 951 err_stop: 952 carl9170_usb_stop(ar); 953 954 err_unrx: 955 carl9170_usb_cancel_urbs(ar); 956 957 err_out: 958 return err; 959 } 960 961 static void carl9170_usb_firmware_failed(struct ar9170 *ar) 962 { 963 struct device *parent = ar->udev->dev.parent; 964 struct usb_device *udev; 965 966 /* 967 * Store a copy of the usb_device pointer locally. 968 * This is because device_release_driver initiates 969 * carl9170_usb_disconnect, which in turn frees our 970 * driver context (ar). 971 */ 972 udev = ar->udev; 973 974 complete(&ar->fw_load_wait); 975 976 /* unbind anything failed */ 977 if (parent) 978 device_lock(parent); 979 980 device_release_driver(&udev->dev); 981 if (parent) 982 device_unlock(parent); 983 984 usb_put_dev(udev); 985 } 986 987 static void carl9170_usb_firmware_finish(struct ar9170 *ar) 988 { 989 int err; 990 991 err = carl9170_parse_firmware(ar); 992 if (err) 993 goto err_freefw; 994 995 err = carl9170_usb_init_device(ar); 996 if (err) 997 goto err_freefw; 998 999 err = carl9170_register(ar); 1000 1001 carl9170_usb_stop(ar); 1002 if (err) 1003 goto err_unrx; 1004 1005 complete(&ar->fw_load_wait); 1006 usb_put_dev(ar->udev); 1007 return; 1008 1009 err_unrx: 1010 carl9170_usb_cancel_urbs(ar); 1011 1012 err_freefw: 1013 carl9170_release_firmware(ar); 1014 carl9170_usb_firmware_failed(ar); 1015 } 1016 1017 static void carl9170_usb_firmware_step2(const struct firmware *fw, 1018 void *context) 1019 { 1020 struct ar9170 *ar = context; 1021 1022 if (fw) { 1023 ar->fw.fw = fw; 1024 carl9170_usb_firmware_finish(ar); 1025 return; 1026 } 1027 1028 dev_err(&ar->udev->dev, "firmware not found.\n"); 1029 carl9170_usb_firmware_failed(ar); 1030 } 1031 1032 static int carl9170_usb_probe(struct usb_interface *intf, 1033 const struct usb_device_id *id) 1034 { 1035 struct ar9170 *ar; 1036 struct usb_device *udev; 1037 int err; 1038 1039 err = usb_reset_device(interface_to_usbdev(intf)); 1040 if (err) 1041 return err; 1042 1043 ar = carl9170_alloc(sizeof(*ar)); 1044 if (IS_ERR(ar)) 1045 return PTR_ERR(ar); 1046 1047 udev = interface_to_usbdev(intf); 1048 usb_get_dev(udev); 1049 ar->udev = udev; 1050 ar->intf = intf; 1051 ar->features = id->driver_info; 1052 1053 usb_set_intfdata(intf, ar); 1054 SET_IEEE80211_DEV(ar->hw, &intf->dev); 1055 1056 init_usb_anchor(&ar->rx_anch); 1057 init_usb_anchor(&ar->rx_pool); 1058 init_usb_anchor(&ar->rx_work); 1059 init_usb_anchor(&ar->tx_wait); 1060 init_usb_anchor(&ar->tx_anch); 1061 init_usb_anchor(&ar->tx_cmd); 1062 init_usb_anchor(&ar->tx_err); 1063 init_completion(&ar->cmd_wait); 1064 init_completion(&ar->fw_boot_wait); 1065 init_completion(&ar->fw_load_wait); 1066 tasklet_init(&ar->usb_tasklet, carl9170_usb_tasklet, 1067 (unsigned long)ar); 1068 1069 atomic_set(&ar->tx_cmd_urbs, 0); 1070 atomic_set(&ar->tx_anch_urbs, 0); 1071 atomic_set(&ar->rx_work_urbs, 0); 1072 atomic_set(&ar->rx_anch_urbs, 0); 1073 atomic_set(&ar->rx_pool_urbs, 0); 1074 1075 usb_get_dev(ar->udev); 1076 1077 carl9170_set_state(ar, CARL9170_STOPPED); 1078 1079 return request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME, 1080 &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2); 1081 } 1082 1083 static void carl9170_usb_disconnect(struct usb_interface *intf) 1084 { 1085 struct ar9170 *ar = usb_get_intfdata(intf); 1086 struct usb_device *udev; 1087 1088 if (WARN_ON(!ar)) 1089 return; 1090 1091 udev = ar->udev; 1092 wait_for_completion(&ar->fw_load_wait); 1093 1094 if (IS_INITIALIZED(ar)) { 1095 carl9170_reboot(ar); 1096 carl9170_usb_stop(ar); 1097 } 1098 1099 carl9170_usb_cancel_urbs(ar); 1100 carl9170_unregister(ar); 1101 1102 usb_set_intfdata(intf, NULL); 1103 1104 carl9170_release_firmware(ar); 1105 carl9170_free(ar); 1106 usb_put_dev(udev); 1107 } 1108 1109 #ifdef CONFIG_PM 1110 static int carl9170_usb_suspend(struct usb_interface *intf, 1111 pm_message_t message) 1112 { 1113 struct ar9170 *ar = usb_get_intfdata(intf); 1114 1115 if (!ar) 1116 return -ENODEV; 1117 1118 carl9170_usb_cancel_urbs(ar); 1119 1120 return 0; 1121 } 1122 1123 static int carl9170_usb_resume(struct usb_interface *intf) 1124 { 1125 struct ar9170 *ar = usb_get_intfdata(intf); 1126 int err; 1127 1128 if (!ar) 1129 return -ENODEV; 1130 1131 usb_unpoison_anchored_urbs(&ar->rx_anch); 1132 carl9170_set_state(ar, CARL9170_STOPPED); 1133 1134 /* 1135 * The USB documentation demands that [for suspend] all traffic 1136 * to and from the device has to stop. This would be fine, but 1137 * there's a catch: the device[usb phy] does not come back. 1138 * 1139 * Upon resume the firmware will "kill" itself and the 1140 * boot-code sorts out the magic voodoo. 1141 * Not very nice, but there's not much what could go wrong. 1142 */ 1143 msleep(1100); 1144 1145 err = carl9170_usb_init_device(ar); 1146 if (err) 1147 goto err_unrx; 1148 1149 return 0; 1150 1151 err_unrx: 1152 carl9170_usb_cancel_urbs(ar); 1153 1154 return err; 1155 } 1156 #endif /* CONFIG_PM */ 1157 1158 static struct usb_driver carl9170_driver = { 1159 .name = KBUILD_MODNAME, 1160 .probe = carl9170_usb_probe, 1161 .disconnect = carl9170_usb_disconnect, 1162 .id_table = carl9170_usb_ids, 1163 .soft_unbind = 1, 1164 #ifdef CONFIG_PM 1165 .suspend = carl9170_usb_suspend, 1166 .resume = carl9170_usb_resume, 1167 .reset_resume = carl9170_usb_resume, 1168 #endif /* CONFIG_PM */ 1169 .disable_hub_initiated_lpm = 1, 1170 }; 1171 1172 module_usb_driver(carl9170_driver); 1173