1 /* 2 * Copyright (c) 2008-2011 Atheros Communications Inc. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15 */ 16 17 /** 18 * DOC: Programming Atheros 802.11n analog front end radios 19 * 20 * AR5416 MAC based PCI devices and AR518 MAC based PCI-Express 21 * devices have either an external AR2133 analog front end radio for single 22 * band 2.4 GHz communication or an AR5133 analog front end radio for dual 23 * band 2.4 GHz / 5 GHz communication. 24 * 25 * All devices after the AR5416 and AR5418 family starting with the AR9280 26 * have their analog front radios, MAC/BB and host PCIe/USB interface embedded 27 * into a single-chip and require less programming. 28 * 29 * The following single-chips exist with a respective embedded radio: 30 * 31 * AR9280 - 11n dual-band 2x2 MIMO for PCIe 32 * AR9281 - 11n single-band 1x2 MIMO for PCIe 33 * AR9285 - 11n single-band 1x1 for PCIe 34 * AR9287 - 11n single-band 2x2 MIMO for PCIe 35 * 36 * AR9220 - 11n dual-band 2x2 MIMO for PCI 37 * AR9223 - 11n single-band 2x2 MIMO for PCI 38 * 39 * AR9287 - 11n single-band 1x1 MIMO for USB 40 */ 41 42 #include "hw.h" 43 #include "ar9002_phy.h" 44 45 /** 46 * ar9002_hw_set_channel - set channel on single-chip device 47 * @ah: atheros hardware structure 48 * @chan: 49 * 50 * This is the function to change channel on single-chip devices, that is 51 * all devices after ar9280. 52 * 53 * This function takes the channel value in MHz and sets 54 * hardware channel value. Assumes writes have been enabled to analog bus. 55 * 56 * Actual Expression, 57 * 58 * For 2GHz channel, 59 * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17) 60 * (freq_ref = 40MHz) 61 * 62 * For 5GHz channel, 63 * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10) 64 * (freq_ref = 40MHz/(24>>amodeRefSel)) 65 */ 66 static int ar9002_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) 67 { 68 u16 bMode, fracMode, aModeRefSel = 0; 69 u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0; 70 struct chan_centers centers; 71 u32 refDivA = 24; 72 73 ath9k_hw_get_channel_centers(ah, chan, ¢ers); 74 freq = centers.synth_center; 75 76 reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL); 77 reg32 &= 0xc0000000; 78 79 if (freq < 4800) { /* 2 GHz, fractional mode */ 80 u32 txctl; 81 int regWrites = 0; 82 83 bMode = 1; 84 fracMode = 1; 85 aModeRefSel = 0; 86 channelSel = CHANSEL_2G(freq); 87 88 if (AR_SREV_9287_11_OR_LATER(ah)) { 89 if (freq == 2484) { 90 /* Enable channel spreading for channel 14 */ 91 REG_WRITE_ARRAY(&ah->iniCckfirJapan2484, 92 1, regWrites); 93 } else { 94 REG_WRITE_ARRAY(&ah->iniCckfirNormal, 95 1, regWrites); 96 } 97 } else { 98 txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL); 99 if (freq == 2484) { 100 /* Enable channel spreading for channel 14 */ 101 REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, 102 txctl | AR_PHY_CCK_TX_CTRL_JAPAN); 103 } else { 104 REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, 105 txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN); 106 } 107 } 108 } else { 109 bMode = 0; 110 fracMode = 0; 111 112 switch (ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) { 113 case 0: 114 if (IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan)) 115 aModeRefSel = 0; 116 else if ((freq % 20) == 0) 117 aModeRefSel = 3; 118 else if ((freq % 10) == 0) 119 aModeRefSel = 2; 120 if (aModeRefSel) 121 break; 122 fallthrough; 123 case 1: 124 default: 125 aModeRefSel = 0; 126 /* 127 * Enable 2G (fractional) mode for channels 128 * which are 5MHz spaced. 129 */ 130 fracMode = 1; 131 refDivA = 1; 132 channelSel = CHANSEL_5G(freq); 133 134 /* RefDivA setting */ 135 ath9k_hw_analog_shift_rmw(ah, AR_AN_SYNTH9, 136 AR_AN_SYNTH9_REFDIVA, 137 AR_AN_SYNTH9_REFDIVA_S, refDivA); 138 139 } 140 141 if (!fracMode) { 142 ndiv = (freq * (refDivA >> aModeRefSel)) / 60; 143 channelSel = ndiv & 0x1ff; 144 channelFrac = (ndiv & 0xfffffe00) * 2; 145 channelSel = (channelSel << 17) | channelFrac; 146 } 147 } 148 149 reg32 = reg32 | 150 (bMode << 29) | 151 (fracMode << 28) | (aModeRefSel << 26) | (channelSel); 152 153 REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32); 154 155 ah->curchan = chan; 156 157 return 0; 158 } 159 160 /** 161 * ar9002_hw_spur_mitigate - convert baseband spur frequency 162 * @ah: atheros hardware structure 163 * @chan: 164 * 165 * For single-chip solutions. Converts to baseband spur frequency given the 166 * input channel frequency and compute register settings below. 167 */ 168 static void ar9002_hw_spur_mitigate(struct ath_hw *ah, 169 struct ath9k_channel *chan) 170 { 171 int bb_spur = AR_NO_SPUR; 172 int freq; 173 int bin; 174 int bb_spur_off, spur_subchannel_sd; 175 int spur_freq_sd; 176 int spur_delta_phase; 177 int denominator; 178 int tmp, newVal; 179 int i; 180 struct chan_centers centers; 181 182 int cur_bb_spur; 183 bool is2GHz = IS_CHAN_2GHZ(chan); 184 185 ath9k_hw_get_channel_centers(ah, chan, ¢ers); 186 freq = centers.synth_center; 187 188 for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { 189 cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); 190 191 if (AR_NO_SPUR == cur_bb_spur) 192 break; 193 194 if (is2GHz) 195 cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ; 196 else 197 cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ; 198 199 cur_bb_spur = cur_bb_spur - freq; 200 201 if (IS_CHAN_HT40(chan)) { 202 if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) && 203 (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) { 204 bb_spur = cur_bb_spur; 205 break; 206 } 207 } else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) && 208 (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) { 209 bb_spur = cur_bb_spur; 210 break; 211 } 212 } 213 214 if (AR_NO_SPUR == bb_spur) { 215 REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, 216 AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); 217 return; 218 } else { 219 REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, 220 AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); 221 } 222 223 bin = bb_spur * 320; 224 225 tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); 226 227 ENABLE_REGWRITE_BUFFER(ah); 228 229 newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | 230 AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | 231 AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | 232 AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); 233 REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal); 234 235 newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | 236 AR_PHY_SPUR_REG_ENABLE_MASK_PPM | 237 AR_PHY_SPUR_REG_MASK_RATE_SELECT | 238 AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | 239 SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); 240 REG_WRITE(ah, AR_PHY_SPUR_REG, newVal); 241 242 if (IS_CHAN_HT40(chan)) { 243 if (bb_spur < 0) { 244 spur_subchannel_sd = 1; 245 bb_spur_off = bb_spur + 10; 246 } else { 247 spur_subchannel_sd = 0; 248 bb_spur_off = bb_spur - 10; 249 } 250 } else { 251 spur_subchannel_sd = 0; 252 bb_spur_off = bb_spur; 253 } 254 255 if (IS_CHAN_HT40(chan)) 256 spur_delta_phase = 257 ((bb_spur * 262144) / 258 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; 259 else 260 spur_delta_phase = 261 ((bb_spur * 524288) / 262 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; 263 264 denominator = IS_CHAN_2GHZ(chan) ? 44 : 40; 265 spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff; 266 267 newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | 268 SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | 269 SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); 270 REG_WRITE(ah, AR_PHY_TIMING11, newVal); 271 272 newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S; 273 REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal); 274 275 ar5008_hw_cmn_spur_mitigate(ah, chan, bin); 276 277 REGWRITE_BUFFER_FLUSH(ah); 278 } 279 280 static void ar9002_olc_init(struct ath_hw *ah) 281 { 282 u32 i; 283 284 if (!OLC_FOR_AR9280_20_LATER) 285 return; 286 287 if (OLC_FOR_AR9287_10_LATER) { 288 REG_SET_BIT(ah, AR_PHY_TX_PWRCTRL9, 289 AR_PHY_TX_PWRCTRL9_RES_DC_REMOVAL); 290 ath9k_hw_analog_shift_rmw(ah, AR9287_AN_TXPC0, 291 AR9287_AN_TXPC0_TXPCMODE, 292 AR9287_AN_TXPC0_TXPCMODE_S, 293 AR9287_AN_TXPC0_TXPCMODE_TEMPSENSE); 294 udelay(100); 295 } else { 296 for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++) 297 ah->originalGain[i] = 298 MS(REG_READ(ah, AR_PHY_TX_GAIN_TBL1 + i * 4), 299 AR_PHY_TX_GAIN); 300 ah->PDADCdelta = 0; 301 } 302 } 303 304 static u32 ar9002_hw_compute_pll_control(struct ath_hw *ah, 305 struct ath9k_channel *chan) 306 { 307 int ref_div = 5; 308 int pll_div = 0x2c; 309 u32 pll; 310 311 if (chan && IS_CHAN_5GHZ(chan) && !IS_CHAN_A_FAST_CLOCK(ah, chan)) { 312 if (AR_SREV_9280_20(ah)) { 313 ref_div = 10; 314 pll_div = 0x50; 315 } else { 316 pll_div = 0x28; 317 } 318 } 319 320 pll = SM(ref_div, AR_RTC_9160_PLL_REFDIV); 321 pll |= SM(pll_div, AR_RTC_9160_PLL_DIV); 322 323 if (chan && IS_CHAN_HALF_RATE(chan)) 324 pll |= SM(0x1, AR_RTC_9160_PLL_CLKSEL); 325 else if (chan && IS_CHAN_QUARTER_RATE(chan)) 326 pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL); 327 328 return pll; 329 } 330 331 static void ar9002_hw_do_getnf(struct ath_hw *ah, 332 int16_t nfarray[NUM_NF_READINGS]) 333 { 334 int16_t nf; 335 336 nf = MS(REG_READ(ah, AR_PHY_CCA), AR9280_PHY_MINCCA_PWR); 337 nfarray[0] = sign_extend32(nf, 8); 338 339 nf = MS(REG_READ(ah, AR_PHY_EXT_CCA), AR9280_PHY_EXT_MINCCA_PWR); 340 if (IS_CHAN_HT40(ah->curchan)) 341 nfarray[3] = sign_extend32(nf, 8); 342 343 if (!(ah->rxchainmask & BIT(1))) 344 return; 345 346 nf = MS(REG_READ(ah, AR_PHY_CH1_CCA), AR9280_PHY_CH1_MINCCA_PWR); 347 nfarray[1] = sign_extend32(nf, 8); 348 349 nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA), AR9280_PHY_CH1_EXT_MINCCA_PWR); 350 if (IS_CHAN_HT40(ah->curchan)) 351 nfarray[4] = sign_extend32(nf, 8); 352 } 353 354 static void ar9002_hw_set_nf_limits(struct ath_hw *ah) 355 { 356 if (AR_SREV_9285(ah)) { 357 ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9285_2GHZ; 358 ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9285_2GHZ; 359 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9285_2GHZ; 360 } else if (AR_SREV_9287(ah)) { 361 ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9287_2GHZ; 362 ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9287_2GHZ; 363 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9287_2GHZ; 364 } else if (AR_SREV_9271(ah)) { 365 ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9271_2GHZ; 366 ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9271_2GHZ; 367 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9271_2GHZ; 368 } else { 369 ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_2GHZ; 370 ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_2GHZ; 371 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9280_2GHZ; 372 ah->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_5GHZ; 373 ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_5GHZ; 374 ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9280_5GHZ; 375 } 376 } 377 378 static void ar9002_hw_antdiv_comb_conf_get(struct ath_hw *ah, 379 struct ath_hw_antcomb_conf *antconf) 380 { 381 u32 regval; 382 383 regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL); 384 antconf->main_lna_conf = (regval & AR_PHY_9285_ANT_DIV_MAIN_LNACONF) >> 385 AR_PHY_9285_ANT_DIV_MAIN_LNACONF_S; 386 antconf->alt_lna_conf = (regval & AR_PHY_9285_ANT_DIV_ALT_LNACONF) >> 387 AR_PHY_9285_ANT_DIV_ALT_LNACONF_S; 388 antconf->fast_div_bias = (regval & AR_PHY_9285_FAST_DIV_BIAS) >> 389 AR_PHY_9285_FAST_DIV_BIAS_S; 390 antconf->lna1_lna2_switch_delta = -1; 391 antconf->lna1_lna2_delta = -3; 392 antconf->div_group = 0; 393 } 394 395 static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah, 396 struct ath_hw_antcomb_conf *antconf) 397 { 398 u32 regval; 399 400 regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL); 401 regval &= ~(AR_PHY_9285_ANT_DIV_MAIN_LNACONF | 402 AR_PHY_9285_ANT_DIV_ALT_LNACONF | 403 AR_PHY_9285_FAST_DIV_BIAS); 404 regval |= ((antconf->main_lna_conf << AR_PHY_9285_ANT_DIV_MAIN_LNACONF_S) 405 & AR_PHY_9285_ANT_DIV_MAIN_LNACONF); 406 regval |= ((antconf->alt_lna_conf << AR_PHY_9285_ANT_DIV_ALT_LNACONF_S) 407 & AR_PHY_9285_ANT_DIV_ALT_LNACONF); 408 regval |= ((antconf->fast_div_bias << AR_PHY_9285_FAST_DIV_BIAS_S) 409 & AR_PHY_9285_FAST_DIV_BIAS); 410 411 REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); 412 } 413 414 #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT 415 416 static void ar9002_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable) 417 { 418 struct ath_btcoex_hw *btcoex = &ah->btcoex_hw; 419 u8 antdiv_ctrl1, antdiv_ctrl2; 420 u32 regval; 421 422 if (enable) { 423 antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_ENABLE; 424 antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_ENABLE; 425 426 /* 427 * Don't disable BT ant to allow BB to control SWCOM. 428 */ 429 btcoex->bt_coex_mode2 &= (~(AR_BT_DISABLE_BT_ANT)); 430 REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2); 431 432 REG_WRITE(ah, AR_PHY_SWITCH_COM, ATH_BT_COEX_ANT_DIV_SWITCH_COM); 433 REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000); 434 } else { 435 /* 436 * Disable antenna diversity, use LNA1 only. 437 */ 438 antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_FIXED_A; 439 antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_FIXED_A; 440 441 /* 442 * Disable BT Ant. to allow concurrent BT and WLAN receive. 443 */ 444 btcoex->bt_coex_mode2 |= AR_BT_DISABLE_BT_ANT; 445 REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2); 446 447 /* 448 * Program SWCOM table to make sure RF switch always parks 449 * at BT side. 450 */ 451 REG_WRITE(ah, AR_PHY_SWITCH_COM, 0); 452 REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000); 453 } 454 455 regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL); 456 regval &= (~(AR_PHY_9285_ANT_DIV_CTL_ALL)); 457 /* 458 * Clear ant_fast_div_bias [14:9] since for WB195, 459 * the main LNA is always LNA1. 460 */ 461 regval &= (~(AR_PHY_9285_FAST_DIV_BIAS)); 462 regval |= SM(antdiv_ctrl1, AR_PHY_9285_ANT_DIV_CTL); 463 regval |= SM(antdiv_ctrl2, AR_PHY_9285_ANT_DIV_ALT_LNACONF); 464 regval |= SM((antdiv_ctrl2 >> 2), AR_PHY_9285_ANT_DIV_MAIN_LNACONF); 465 regval |= SM((antdiv_ctrl1 >> 1), AR_PHY_9285_ANT_DIV_ALT_GAINTB); 466 regval |= SM((antdiv_ctrl1 >> 2), AR_PHY_9285_ANT_DIV_MAIN_GAINTB); 467 REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); 468 469 regval = REG_READ(ah, AR_PHY_CCK_DETECT); 470 regval &= (~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); 471 regval |= SM((antdiv_ctrl1 >> 3), AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); 472 REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); 473 } 474 475 #endif 476 477 static void ar9002_hw_spectral_scan_config(struct ath_hw *ah, 478 struct ath_spec_scan *param) 479 { 480 u32 repeat_bit; 481 u8 count; 482 483 if (!param->enabled) { 484 REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, 485 AR_PHY_SPECTRAL_SCAN_ENABLE); 486 return; 487 } 488 REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA); 489 REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); 490 491 if (AR_SREV_9280(ah)) 492 repeat_bit = AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT; 493 else 494 repeat_bit = AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_KIWI; 495 496 if (param->short_repeat) 497 REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, repeat_bit); 498 else 499 REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, repeat_bit); 500 501 /* on AR92xx, the highest bit of count will make the the chip send 502 * spectral samples endlessly. Check if this really was intended, 503 * and fix otherwise. 504 */ 505 count = param->count; 506 if (param->endless) { 507 if (AR_SREV_9280(ah)) 508 count = 0x80; 509 else 510 count = 0; 511 } else if (count & 0x80) 512 count = 0x7f; 513 else if (!count) 514 count = 1; 515 516 if (AR_SREV_9280(ah)) { 517 REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, 518 AR_PHY_SPECTRAL_SCAN_COUNT, count); 519 } else { 520 REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, 521 AR_PHY_SPECTRAL_SCAN_COUNT_KIWI, count); 522 REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, 523 AR_PHY_SPECTRAL_SCAN_PHYERR_MASK_SELECT); 524 } 525 526 REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, 527 AR_PHY_SPECTRAL_SCAN_PERIOD, param->period); 528 REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, 529 AR_PHY_SPECTRAL_SCAN_FFT_PERIOD, param->fft_period); 530 531 return; 532 } 533 534 static void ar9002_hw_spectral_scan_trigger(struct ath_hw *ah) 535 { 536 REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); 537 /* Activate spectral scan */ 538 REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, 539 AR_PHY_SPECTRAL_SCAN_ACTIVE); 540 } 541 542 static void ar9002_hw_spectral_scan_wait(struct ath_hw *ah) 543 { 544 struct ath_common *common = ath9k_hw_common(ah); 545 546 /* Poll for spectral scan complete */ 547 if (!ath9k_hw_wait(ah, AR_PHY_SPECTRAL_SCAN, 548 AR_PHY_SPECTRAL_SCAN_ACTIVE, 549 0, AH_WAIT_TIMEOUT)) { 550 ath_err(common, "spectral scan wait failed\n"); 551 return; 552 } 553 } 554 555 static void ar9002_hw_tx99_start(struct ath_hw *ah, u32 qnum) 556 { 557 REG_SET_BIT(ah, 0x9864, 0x7f000); 558 REG_SET_BIT(ah, 0x9924, 0x7f00fe); 559 REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS); 560 REG_WRITE(ah, AR_CR, AR_CR_RXD); 561 REG_WRITE(ah, AR_DLCL_IFS(qnum), 0); 562 REG_WRITE(ah, AR_D_GBL_IFS_SIFS, 20); 563 REG_WRITE(ah, AR_D_GBL_IFS_EIFS, 20); 564 REG_WRITE(ah, AR_D_FPCTL, 0x10|qnum); 565 REG_WRITE(ah, AR_TIME_OUT, 0x00000400); 566 REG_WRITE(ah, AR_DRETRY_LIMIT(qnum), 0xffffffff); 567 REG_SET_BIT(ah, AR_QMISC(qnum), AR_Q_MISC_DCU_EARLY_TERM_REQ); 568 } 569 570 static void ar9002_hw_tx99_stop(struct ath_hw *ah) 571 { 572 REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS); 573 } 574 575 void ar9002_hw_attach_phy_ops(struct ath_hw *ah) 576 { 577 struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); 578 struct ath_hw_ops *ops = ath9k_hw_ops(ah); 579 580 priv_ops->set_rf_regs = NULL; 581 priv_ops->rf_set_freq = ar9002_hw_set_channel; 582 priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate; 583 priv_ops->olc_init = ar9002_olc_init; 584 priv_ops->compute_pll_control = ar9002_hw_compute_pll_control; 585 priv_ops->do_getnf = ar9002_hw_do_getnf; 586 587 ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get; 588 ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set; 589 ops->spectral_scan_config = ar9002_hw_spectral_scan_config; 590 ops->spectral_scan_trigger = ar9002_hw_spectral_scan_trigger; 591 ops->spectral_scan_wait = ar9002_hw_spectral_scan_wait; 592 593 #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT 594 ops->set_bt_ant_diversity = ar9002_hw_set_bt_ant_diversity; 595 #endif 596 ops->tx99_start = ar9002_hw_tx99_start; 597 ops->tx99_stop = ar9002_hw_tx99_stop; 598 599 ar9002_hw_set_nf_limits(ah); 600 } 601