1config ATH9K_HW
2	tristate
3config ATH9K_COMMON
4	tristate
5	select ATH_COMMON
6config ATH9K_DFS_DEBUGFS
7	def_bool y
8	depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
9
10config ATH9K_BTCOEX_SUPPORT
11	bool "Atheros bluetooth coexistence support"
12	depends on (ATH9K || ATH9K_HTC)
13	default y
14	---help---
15	  Say Y, if you want to use the ath9k/ath9k_htc radios together with
16	  Bluetooth modules in the same system.
17
18config ATH9K
19	tristate "Atheros 802.11n wireless cards support"
20	depends on MAC80211 && HAS_DMA
21	select ATH9K_HW
22	select MAC80211_LEDS
23	select LEDS_CLASS
24	select NEW_LEDS
25	select ATH9K_COMMON
26	---help---
27	  This module adds support for wireless adapters based on
28	  Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
29	  of chipsets. For a specific list of supported external
30	  cards, laptops that already ship with these cards and
31	  APs that come with these cards refer to ath9k wiki
32	  products page:
33
34	  http://wireless.kernel.org/en/users/Drivers/ath9k/products
35
36	  If you choose to build a module, it'll be called ath9k.
37
38config ATH9K_PCI
39	bool "Atheros ath9k PCI/PCIe bus support"
40	default y
41	depends on ATH9K && PCI
42	---help---
43	  This option enables the PCI bus support in ath9k.
44
45	  Say Y, if you have a compatible PCI/PCIe wireless card.
46
47config ATH9K_AHB
48	bool "Atheros ath9k AHB bus support"
49	depends on ATH9K
50	default n
51	---help---
52	  This option enables the AHB bus support in ath9k.
53
54	  Say Y, if you have a SoC with a compatible built-in
55	  wireless MAC. Say N if unsure.
56
57config ATH9K_DEBUGFS
58	bool "Atheros ath9k debugging"
59	depends on ATH9K
60	select MAC80211_DEBUGFS
61	select RELAY
62	---help---
63	  Say Y, if you need access to ath9k's statistics for
64	  interrupts, rate control, etc.
65
66	  Also required for changing debug message flags at run time.
67
68config ATH9K_DFS_CERTIFIED
69	bool "Atheros DFS support for certified platforms"
70	depends on ATH9K && CFG80211_CERTIFICATION_ONUS
71	default n
72	---help---
73	  This option enables DFS support for initiating radiation on
74	  ath9k. There is no way to dynamically detect if a card was DFS
75	  certified and as such this is left as a build time option. This
76	  option should only be enabled by system integrators that can
77	  guarantee that all the platforms that their kernel will run on
78	  have obtained appropriate regulatory body certification for a
79	  respective Atheros card by using ath9k on the target shipping
80	  platforms.
81
82	  This is currently only a placeholder for future DFS support,
83	  as DFS support requires more components that still need to be
84	  developed. At this point enabling this option won't do anything
85	  except increase code size.
86
87config ATH9K_LEGACY_RATE_CONTROL
88	bool "Atheros ath9k rate control"
89	depends on ATH9K
90	default n
91	---help---
92	  Say Y, if you want to use the ath9k specific rate control
93	  module instead of minstrel_ht. Be warned that there are various
94	  issues with the ath9k RC and minstrel is a more robust algorithm.
95	  Note that even if this option is selected, "ath9k_rate_control"
96	  has to be passed to mac80211 using the module parameter,
97	  ieee80211_default_rc_algo.
98
99config ATH9K_HTC
100       tristate "Atheros HTC based wireless cards support"
101       depends on USB && MAC80211
102       select ATH9K_HW
103       select MAC80211_LEDS
104       select LEDS_CLASS
105       select NEW_LEDS
106       select ATH9K_COMMON
107       ---help---
108	 Support for Atheros HTC based cards.
109	 Chipsets supported: AR9271
110
111	 For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
112
113	 The built module will be ath9k_htc.
114
115config ATH9K_HTC_DEBUGFS
116	bool "Atheros ath9k_htc debugging"
117	depends on ATH9K_HTC && DEBUG_FS
118	---help---
119	  Say Y, if you need access to ath9k_htc's statistics.
120