1config ATH9K_HW
2	tristate
3config ATH9K_COMMON
4	tristate
5config ATH9K_DFS_DEBUGFS
6	def_bool y
7	depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
8
9config ATH9K_BTCOEX_SUPPORT
10	bool "Atheros bluetooth coexistence support"
11	depends on (ATH9K || ATH9K_HTC)
12	default y
13	---help---
14	  Say Y, if you want to use the ath9k/ath9k_htc radios together with
15	  Bluetooth modules in the same system.
16
17config ATH9K
18	tristate "Atheros 802.11n wireless cards support"
19	depends on MAC80211
20	select ATH9K_HW
21	select MAC80211_LEDS
22	select LEDS_CLASS
23	select NEW_LEDS
24	select ATH9K_COMMON
25	---help---
26	  This module adds support for wireless adapters based on
27	  Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
28	  of chipsets. For a specific list of supported external
29	  cards, laptops that already ship with these cards and
30	  APs that come with these cards refer to to ath9k wiki
31	  products page:
32
33	  http://wireless.kernel.org/en/users/Drivers/ath9k/products
34
35	  If you choose to build a module, it'll be called ath9k.
36
37config ATH9K_PCI
38	bool "Atheros ath9k PCI/PCIe bus support"
39	default y
40	depends on ATH9K && PCI
41	---help---
42	  This option enables the PCI bus support in ath9k.
43
44	  Say Y, if you have a compatible PCI/PCIe wireless card.
45
46config ATH9K_AHB
47	bool "Atheros ath9k AHB bus support"
48	depends on ATH9K
49	default n
50	---help---
51	  This option enables the AHB bus support in ath9k.
52
53	  Say Y, if you have a SoC with a compatible built-in
54	  wireless MAC. Say N if unsure.
55
56config ATH9K_DEBUGFS
57	bool "Atheros ath9k debugging"
58	depends on ATH9K && DEBUG_FS
59	---help---
60	  Say Y, if you need access to ath9k's statistics for
61	  interrupts, rate control, etc.
62
63	  Also required for changing debug message flags at run time.
64
65config ATH9K_DFS_CERTIFIED
66	bool "Atheros DFS support for certified platforms"
67	depends on ATH9K && EXPERT
68	default n
69	---help---
70	  This option enables DFS support for initiating radiation on
71	  ath9k. There is no way to dynamically detect if a card was DFS
72	  certified and as such this is left as a build time option. This
73	  option should only be enabled by system integrators that can
74	  guarantee that all the platforms that their kernel will run on
75	  have obtained appropriate regulatory body certification for a
76	  respective Atheros card by using ath9k on the target shipping
77	  platforms.
78
79	  This is currently only a placeholder for future DFS support,
80	  as DFS support requires more components that still need to be
81	  developed. At this point enabling this option won't do anything
82	  except increase code size.
83
84config ATH9K_RATE_CONTROL
85	bool "Atheros ath9k rate control"
86	depends on ATH9K
87	default y
88	---help---
89	  Say Y, if you want to use the ath9k specific rate control
90	  module instead of minstrel_ht.
91
92config ATH9K_HTC
93       tristate "Atheros HTC based wireless cards support"
94       depends on USB && MAC80211
95       select ATH9K_HW
96       select MAC80211_LEDS
97       select LEDS_CLASS
98       select NEW_LEDS
99       select ATH9K_COMMON
100       ---help---
101	 Support for Atheros HTC based cards.
102	 Chipsets supported: AR9271
103
104	 For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
105
106	 The built module will be ath9k_htc.
107
108config ATH9K_HTC_DEBUGFS
109	bool "Atheros ath9k_htc debugging"
110	depends on ATH9K_HTC && DEBUG_FS
111	---help---
112	  Say Y, if you need access to ath9k_htc's statistics.
113