1config ATH9K_HW
2	tristate
3config ATH9K_COMMON
4	tristate
5config ATH9K_DFS_DEBUGFS
6	def_bool y
7	depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
8
9config ATH9K
10	tristate "Atheros 802.11n wireless cards support"
11	depends on MAC80211
12	select ATH9K_HW
13	select MAC80211_LEDS
14	select LEDS_CLASS
15	select NEW_LEDS
16	select ATH9K_COMMON
17	---help---
18	  This module adds support for wireless adapters based on
19	  Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
20	  of chipsets. For a specific list of supported external
21	  cards, laptops that already ship with these cards and
22	  APs that come with these cards refer to to ath9k wiki
23	  products page:
24
25	  http://wireless.kernel.org/en/users/Drivers/ath9k/products
26
27	  If you choose to build a module, it'll be called ath9k.
28
29config ATH9K_PCI
30	bool "Atheros ath9k PCI/PCIe bus support"
31	default y
32	depends on ATH9K && PCI
33	---help---
34	  This option enables the PCI bus support in ath9k.
35
36	  Say Y, if you have a compatible PCI/PCIe wireless card.
37
38config ATH9K_AHB
39	bool "Atheros ath9k AHB bus support"
40	depends on ATH9K
41	default n
42	---help---
43	  This option enables the AHB bus support in ath9k.
44
45	  Say Y, if you have a SoC with a compatible built-in
46	  wireless MAC. Say N if unsure.
47
48config ATH9K_DEBUGFS
49	bool "Atheros ath9k debugging"
50	depends on ATH9K && DEBUG_FS
51	---help---
52	  Say Y, if you need access to ath9k's statistics for
53	  interrupts, rate control, etc.
54
55	  Also required for changing debug message flags at run time.
56
57config ATH9K_DFS_CERTIFIED
58	bool "Atheros DFS support for certified platforms"
59	depends on ATH9K && EXPERT
60	default n
61	---help---
62	  This option enables DFS support for initiating radiation on
63	  ath9k. There is no way to dynamically detect if a card was DFS
64	  certified and as such this is left as a build time option. This
65	  option should only be enabled by system integrators that can
66	  guarantee that all the platforms that their kernel will run on
67	  have obtained appropriate regulatory body certification for a
68	  respective Atheros card by using ath9k on the target shipping
69	  platforms.
70
71	  This is currently only a placeholder for future DFS support,
72	  as DFS support requires more components that still need to be
73	  developed. At this point enabling this option won't do anything
74	  except increase code size.
75
76config ATH9K_RATE_CONTROL
77	bool "Atheros ath9k rate control"
78	depends on ATH9K
79	default y
80	---help---
81	  Say Y, if you want to use the ath9k specific rate control
82	  module instead of minstrel_ht.
83
84config ATH9K_HTC
85       tristate "Atheros HTC based wireless cards support"
86       depends on USB && MAC80211
87       select ATH9K_HW
88       select MAC80211_LEDS
89       select LEDS_CLASS
90       select NEW_LEDS
91       select ATH9K_COMMON
92       ---help---
93	 Support for Atheros HTC based cards.
94	 Chipsets supported: AR9271
95
96	 For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
97
98	 The built module will be ath9k_htc.
99
100config ATH9K_HTC_DEBUGFS
101	bool "Atheros ath9k_htc debugging"
102	depends on ATH9K_HTC && DEBUG_FS
103	---help---
104	  Say Y, if you need access to ath9k_htc's statistics.
105