1 /*
2  * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
3  * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
4  * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
5  * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
6  * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
7  *
8  * Permission to use, copy, modify, and distribute this software for any
9  * purpose with or without fee is hereby granted, provided that the above
10  * copyright notice and this permission notice appear in all copies.
11  *
12  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
13  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
14  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
15  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
16  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
17  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
18  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
19  *
20  */
21 
22 /****************************\
23   Reset function and helpers
24 \****************************/
25 
26 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
27 
28 #include <asm/unaligned.h>
29 
30 #include <linux/pci.h>		/* To determine if a card is pci-e */
31 #include <linux/log2.h>
32 #include <linux/platform_device.h>
33 #include "ath5k.h"
34 #include "reg.h"
35 #include "debug.h"
36 
37 
38 /**
39  * DOC: Reset function and helpers
40  *
41  * Here we implement the main reset routine, used to bring the card
42  * to a working state and ready to receive. We also handle routines
43  * that don't fit on other places such as clock, sleep and power control
44  */
45 
46 
47 /******************\
48 * Helper functions *
49 \******************/
50 
51 /**
52  * ath5k_hw_register_timeout() - Poll a register for a flag/field change
53  * @ah: The &struct ath5k_hw
54  * @reg: The register to read
55  * @flag: The flag/field to check on the register
56  * @val: The field value we expect (if we check a field)
57  * @is_set: Instead of checking if the flag got cleared, check if it got set
58  *
59  * Some registers contain flags that indicate that an operation is
60  * running. We use this function to poll these registers and check
61  * if these flags get cleared. We also use it to poll a register
62  * field (containing multiple flags) until it gets a specific value.
63  *
64  * Returns -EAGAIN if we exceeded AR5K_TUNE_REGISTER_TIMEOUT * 15us or 0
65  */
66 int
67 ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
68 			      bool is_set)
69 {
70 	int i;
71 	u32 data;
72 
73 	for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
74 		data = ath5k_hw_reg_read(ah, reg);
75 		if (is_set && (data & flag))
76 			break;
77 		else if ((data & flag) == val)
78 			break;
79 		udelay(15);
80 	}
81 
82 	return (i <= 0) ? -EAGAIN : 0;
83 }
84 
85 
86 /*************************\
87 * Clock related functions *
88 \*************************/
89 
90 /**
91  * ath5k_hw_htoclock() - Translate usec to hw clock units
92  * @ah: The &struct ath5k_hw
93  * @usec: value in microseconds
94  *
95  * Translate usecs to hw clock units based on the current
96  * hw clock rate.
97  *
98  * Returns number of clock units
99  */
100 unsigned int
101 ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec)
102 {
103 	struct ath_common *common = ath5k_hw_common(ah);
104 	return usec * common->clockrate;
105 }
106 
107 /**
108  * ath5k_hw_clocktoh() - Translate hw clock units to usec
109  * @ah: The &struct ath5k_hw
110  * @clock: value in hw clock units
111  *
112  * Translate hw clock units to usecs based on the current
113  * hw clock rate.
114  *
115  * Returns number of usecs
116  */
117 unsigned int
118 ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock)
119 {
120 	struct ath_common *common = ath5k_hw_common(ah);
121 	return clock / common->clockrate;
122 }
123 
124 /**
125  * ath5k_hw_init_core_clock() - Initialize core clock
126  * @ah: The &struct ath5k_hw
127  *
128  * Initialize core clock parameters (usec, usec32, latencies etc),
129  * based on current bwmode and chipset properties.
130  */
131 static void
132 ath5k_hw_init_core_clock(struct ath5k_hw *ah)
133 {
134 	struct ieee80211_channel *channel = ah->ah_current_channel;
135 	struct ath_common *common = ath5k_hw_common(ah);
136 	u32 usec_reg, txlat, rxlat, usec, clock, sclock, txf2txs;
137 
138 	/*
139 	 * Set core clock frequency
140 	 */
141 	switch (channel->hw_value) {
142 	case AR5K_MODE_11A:
143 		clock = 40;
144 		break;
145 	case AR5K_MODE_11B:
146 		clock = 22;
147 		break;
148 	case AR5K_MODE_11G:
149 	default:
150 		clock = 44;
151 		break;
152 	}
153 
154 	/* Use clock multiplier for non-default
155 	 * bwmode */
156 	switch (ah->ah_bwmode) {
157 	case AR5K_BWMODE_40MHZ:
158 		clock *= 2;
159 		break;
160 	case AR5K_BWMODE_10MHZ:
161 		clock /= 2;
162 		break;
163 	case AR5K_BWMODE_5MHZ:
164 		clock /= 4;
165 		break;
166 	default:
167 		break;
168 	}
169 
170 	common->clockrate = clock;
171 
172 	/*
173 	 * Set USEC parameters
174 	 */
175 	/* Set USEC counter on PCU*/
176 	usec = clock - 1;
177 	usec = AR5K_REG_SM(usec, AR5K_USEC_1);
178 
179 	/* Set usec duration on DCU */
180 	if (ah->ah_version != AR5K_AR5210)
181 		AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC,
182 					AR5K_DCU_GBL_IFS_MISC_USEC_DUR,
183 					clock);
184 
185 	/* Set 32MHz USEC counter */
186 	if ((ah->ah_radio == AR5K_RF5112) ||
187 	    (ah->ah_radio == AR5K_RF2413) ||
188 	    (ah->ah_radio == AR5K_RF5413) ||
189 	    (ah->ah_radio == AR5K_RF2316) ||
190 	    (ah->ah_radio == AR5K_RF2317))
191 		/* Remain on 40MHz clock ? */
192 		sclock = 40 - 1;
193 	else
194 		sclock = 32 - 1;
195 	sclock = AR5K_REG_SM(sclock, AR5K_USEC_32);
196 
197 	/*
198 	 * Set tx/rx latencies
199 	 */
200 	usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
201 	txlat = AR5K_REG_MS(usec_reg, AR5K_USEC_TX_LATENCY_5211);
202 	rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211);
203 
204 	/*
205 	 * Set default Tx frame to Tx data start delay
206 	 */
207 	txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT;
208 
209 	/*
210 	 * 5210 initvals don't include usec settings
211 	 * so we need to use magic values here for
212 	 * tx/rx latencies
213 	 */
214 	if (ah->ah_version == AR5K_AR5210) {
215 		/* same for turbo */
216 		txlat = AR5K_INIT_TX_LATENCY_5210;
217 		rxlat = AR5K_INIT_RX_LATENCY_5210;
218 	}
219 
220 	if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
221 		/* 5311 has different tx/rx latency masks
222 		 * from 5211, since we deal 5311 the same
223 		 * as 5211 when setting initvals, shift
224 		 * values here to their proper locations
225 		 *
226 		 * Note: Initvals indicate tx/rx/ latencies
227 		 * are the same for turbo mode */
228 		txlat = AR5K_REG_SM(txlat, AR5K_USEC_TX_LATENCY_5210);
229 		rxlat = AR5K_REG_SM(rxlat, AR5K_USEC_RX_LATENCY_5210);
230 	} else
231 	switch (ah->ah_bwmode) {
232 	case AR5K_BWMODE_10MHZ:
233 		txlat = AR5K_REG_SM(txlat * 2,
234 				AR5K_USEC_TX_LATENCY_5211);
235 		rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX,
236 				AR5K_USEC_RX_LATENCY_5211);
237 		txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_10MHZ;
238 		break;
239 	case AR5K_BWMODE_5MHZ:
240 		txlat = AR5K_REG_SM(txlat * 4,
241 				AR5K_USEC_TX_LATENCY_5211);
242 		rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX,
243 				AR5K_USEC_RX_LATENCY_5211);
244 		txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_5MHZ;
245 		break;
246 	case AR5K_BWMODE_40MHZ:
247 		txlat = AR5K_INIT_TX_LAT_MIN;
248 		rxlat = AR5K_REG_SM(rxlat / 2,
249 				AR5K_USEC_RX_LATENCY_5211);
250 		txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT;
251 		break;
252 	default:
253 		break;
254 	}
255 
256 	usec_reg = (usec | sclock | txlat | rxlat);
257 	ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC);
258 
259 	/* On 5112 set tx frame to tx data start delay */
260 	if (ah->ah_radio == AR5K_RF5112) {
261 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2,
262 					AR5K_PHY_RF_CTL2_TXF2TXD_START,
263 					txf2txs);
264 	}
265 }
266 
267 /**
268  * ath5k_hw_set_sleep_clock() - Setup sleep clock operation
269  * @ah: The &struct ath5k_hw
270  * @enable: Enable sleep clock operation (false to disable)
271  *
272  * If there is an external 32KHz crystal available, use it
273  * as ref. clock instead of 32/40MHz clock and baseband clocks
274  * to save power during sleep or restore normal 32/40MHz
275  * operation.
276  *
277  * NOTE: When operating on 32KHz certain PHY registers (27 - 31,
278  * 123 - 127) require delay on access.
279  */
280 static void
281 ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
282 {
283 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
284 	u32 scal, spending, sclock;
285 
286 	/* Only set 32KHz settings if we have an external
287 	 * 32KHz crystal present */
288 	if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) ||
289 	AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) &&
290 	enable) {
291 
292 		/* 1 usec/cycle */
293 		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1);
294 		/* Set up tsf increment on each cycle */
295 		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61);
296 
297 		/* Set baseband sleep control registers
298 		 * and sleep control rate */
299 		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
300 
301 		if ((ah->ah_radio == AR5K_RF5112) ||
302 		(ah->ah_radio == AR5K_RF5413) ||
303 		(ah->ah_radio == AR5K_RF2316) ||
304 		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
305 			spending = 0x14;
306 		else
307 			spending = 0x18;
308 		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
309 
310 		if ((ah->ah_radio == AR5K_RF5112) ||
311 		(ah->ah_radio == AR5K_RF5413) ||
312 		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
313 			ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT);
314 			ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL);
315 			ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK);
316 			ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY);
317 			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
318 				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02);
319 		} else {
320 			ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT);
321 			ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL);
322 			ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK);
323 			ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY);
324 			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
325 				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03);
326 		}
327 
328 		/* Enable sleep clock operation */
329 		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG,
330 				AR5K_PCICFG_SLEEP_CLOCK_EN);
331 
332 	} else {
333 
334 		/* Disable sleep clock operation and
335 		 * restore default parameters */
336 		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
337 				AR5K_PCICFG_SLEEP_CLOCK_EN);
338 
339 		AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
340 				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);
341 
342 		/* Set DAC/ADC delays */
343 		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
344 		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
345 
346 		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
347 			scal = AR5K_PHY_SCAL_32MHZ_2417;
348 		else if (ee->ee_is_hb63)
349 			scal = AR5K_PHY_SCAL_32MHZ_HB63;
350 		else
351 			scal = AR5K_PHY_SCAL_32MHZ;
352 		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
353 
354 		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
355 		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
356 
357 		if ((ah->ah_radio == AR5K_RF5112) ||
358 		(ah->ah_radio == AR5K_RF5413) ||
359 		(ah->ah_radio == AR5K_RF2316) ||
360 		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
361 			spending = 0x14;
362 		else
363 			spending = 0x18;
364 		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
365 
366 		/* Set up tsf increment on each cycle */
367 		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
368 
369 		if ((ah->ah_radio == AR5K_RF5112) ||
370 			(ah->ah_radio == AR5K_RF5413) ||
371 			(ah->ah_radio == AR5K_RF2316) ||
372 			(ah->ah_radio == AR5K_RF2317))
373 			sclock = 40 - 1;
374 		else
375 			sclock = 32 - 1;
376 		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, sclock);
377 	}
378 }
379 
380 
381 /*********************\
382 * Reset/Sleep control *
383 \*********************/
384 
385 /**
386  * ath5k_hw_nic_reset() - Reset the various chipset units
387  * @ah: The &struct ath5k_hw
388  * @val: Mask to indicate what units to reset
389  *
390  * To reset the various chipset units we need to write
391  * the mask to AR5K_RESET_CTL and poll the register until
392  * all flags are cleared.
393  *
394  * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout)
395  */
396 static int
397 ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
398 {
399 	int ret;
400 	u32 mask = val ? val : ~0U;
401 
402 	/* Read-and-clear RX Descriptor Pointer*/
403 	ath5k_hw_reg_read(ah, AR5K_RXDP);
404 
405 	/*
406 	 * Reset the device and wait until success
407 	 */
408 	ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
409 
410 	/* Wait at least 128 PCI clocks */
411 	usleep_range(15, 20);
412 
413 	if (ah->ah_version == AR5K_AR5210) {
414 		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
415 			| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
416 		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
417 			| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
418 	} else {
419 		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
420 		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
421 	}
422 
423 	ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
424 
425 	/*
426 	 * Reset configuration register (for hw byte-swap). Note that this
427 	 * is only set for big endian. We do the necessary magic in
428 	 * AR5K_INIT_CFG.
429 	 */
430 	if ((val & AR5K_RESET_CTL_PCU) == 0)
431 		ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
432 
433 	return ret;
434 }
435 
436 /**
437  * ath5k_hw_wisoc_reset() -  Reset AHB chipset
438  * @ah: The &struct ath5k_hw
439  * @flags: Mask to indicate what units to reset
440  *
441  * Same as ath5k_hw_nic_reset but for AHB based devices
442  *
443  * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout)
444  */
445 static int
446 ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
447 {
448 	u32 mask = flags ? flags : ~0U;
449 	u32 __iomem *reg;
450 	u32 regval;
451 	u32 val = 0;
452 
453 	/* ah->ah_mac_srev is not available at this point yet */
454 	if (ah->devid >= AR5K_SREV_AR2315_R6) {
455 		reg = (u32 __iomem *) AR5K_AR2315_RESET;
456 		if (mask & AR5K_RESET_CTL_PCU)
457 			val |= AR5K_AR2315_RESET_WMAC;
458 		if (mask & AR5K_RESET_CTL_BASEBAND)
459 			val |= AR5K_AR2315_RESET_BB_WARM;
460 	} else {
461 		reg = (u32 __iomem *) AR5K_AR5312_RESET;
462 		if (to_platform_device(ah->dev)->id == 0) {
463 			if (mask & AR5K_RESET_CTL_PCU)
464 				val |= AR5K_AR5312_RESET_WMAC0;
465 			if (mask & AR5K_RESET_CTL_BASEBAND)
466 				val |= AR5K_AR5312_RESET_BB0_COLD |
467 				       AR5K_AR5312_RESET_BB0_WARM;
468 		} else {
469 			if (mask & AR5K_RESET_CTL_PCU)
470 				val |= AR5K_AR5312_RESET_WMAC1;
471 			if (mask & AR5K_RESET_CTL_BASEBAND)
472 				val |= AR5K_AR5312_RESET_BB1_COLD |
473 				       AR5K_AR5312_RESET_BB1_WARM;
474 		}
475 	}
476 
477 	/* Put BB/MAC into reset */
478 	regval = ioread32(reg);
479 	iowrite32(regval | val, reg);
480 	regval = ioread32(reg);
481 	udelay(100);	/* NB: should be atomic */
482 
483 	/* Bring BB/MAC out of reset */
484 	iowrite32(regval & ~val, reg);
485 	regval = ioread32(reg);
486 
487 	/*
488 	 * Reset configuration register (for hw byte-swap). Note that this
489 	 * is only set for big endian. We do the necessary magic in
490 	 * AR5K_INIT_CFG.
491 	 */
492 	if ((flags & AR5K_RESET_CTL_PCU) == 0)
493 		ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
494 
495 	return 0;
496 }
497 
498 /**
499  * ath5k_hw_set_power_mode() - Set power mode
500  * @ah: The &struct ath5k_hw
501  * @mode: One of enum ath5k_power_mode
502  * @set_chip: Set to true to write sleep control register
503  * @sleep_duration: How much time the device is allowed to sleep
504  * when sleep logic is enabled (in 128 microsecond increments).
505  *
506  * This function is used to configure sleep policy and allowed
507  * sleep modes. For more information check out the sleep control
508  * register on reg.h and STA_ID1.
509  *
510  * Returns 0 on success, -EIO if chip didn't wake up or -EINVAL if an invalid
511  * mode is requested.
512  */
513 static int
514 ath5k_hw_set_power_mode(struct ath5k_hw *ah, enum ath5k_power_mode mode,
515 			      bool set_chip, u16 sleep_duration)
516 {
517 	unsigned int i;
518 	u32 staid, data;
519 
520 	staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
521 
522 	switch (mode) {
523 	case AR5K_PM_AUTO:
524 		staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
525 		fallthrough;
526 	case AR5K_PM_NETWORK_SLEEP:
527 		if (set_chip)
528 			ath5k_hw_reg_write(ah,
529 				AR5K_SLEEP_CTL_SLE_ALLOW |
530 				sleep_duration,
531 				AR5K_SLEEP_CTL);
532 
533 		staid |= AR5K_STA_ID1_PWR_SV;
534 		break;
535 
536 	case AR5K_PM_FULL_SLEEP:
537 		if (set_chip)
538 			ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
539 				AR5K_SLEEP_CTL);
540 
541 		staid |= AR5K_STA_ID1_PWR_SV;
542 		break;
543 
544 	case AR5K_PM_AWAKE:
545 
546 		staid &= ~AR5K_STA_ID1_PWR_SV;
547 
548 		if (!set_chip)
549 			goto commit;
550 
551 		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
552 
553 		/* If card is down we 'll get 0xffff... so we
554 		 * need to clean this up before we write the register
555 		 */
556 		if (data & 0xffc00000)
557 			data = 0;
558 		else
559 			/* Preserve sleep duration etc */
560 			data = data & ~AR5K_SLEEP_CTL_SLE;
561 
562 		ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
563 							AR5K_SLEEP_CTL);
564 		usleep_range(15, 20);
565 
566 		for (i = 200; i > 0; i--) {
567 			/* Check if the chip did wake up */
568 			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
569 					AR5K_PCICFG_SPWR_DN) == 0)
570 				break;
571 
572 			/* Wait a bit and retry */
573 			usleep_range(50, 75);
574 			ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
575 							AR5K_SLEEP_CTL);
576 		}
577 
578 		/* Fail if the chip didn't wake up */
579 		if (i == 0)
580 			return -EIO;
581 
582 		break;
583 
584 	default:
585 		return -EINVAL;
586 	}
587 
588 commit:
589 	ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
590 
591 	return 0;
592 }
593 
594 /**
595  * ath5k_hw_on_hold() - Put device on hold
596  * @ah: The &struct ath5k_hw
597  *
598  * Put MAC and Baseband on warm reset and keep that state
599  * (don't clean sleep control register). After this MAC
600  * and Baseband are disabled and a full reset is needed
601  * to come back. This way we save as much power as possible
602  * without putting the card on full sleep.
603  *
604  * Returns 0 on success or -EIO on error
605  */
606 int
607 ath5k_hw_on_hold(struct ath5k_hw *ah)
608 {
609 	struct pci_dev *pdev = ah->pdev;
610 	u32 bus_flags;
611 	int ret;
612 
613 	if (ath5k_get_bus_type(ah) == ATH_AHB)
614 		return 0;
615 
616 	/* Make sure device is awake */
617 	ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
618 	if (ret) {
619 		ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n");
620 		return ret;
621 	}
622 
623 	/*
624 	 * Put chipset on warm reset...
625 	 *
626 	 * Note: putting PCI core on warm reset on PCI-E cards
627 	 * results card to hang and always return 0xffff... so
628 	 * we ignore that flag for PCI-E cards. On PCI cards
629 	 * this flag gets cleared after 64 PCI clocks.
630 	 */
631 	bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI;
632 
633 	if (ah->ah_version == AR5K_AR5210) {
634 		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
635 			AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
636 			AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
637 		usleep_range(2000, 2500);
638 	} else {
639 		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
640 			AR5K_RESET_CTL_BASEBAND | bus_flags);
641 	}
642 
643 	if (ret) {
644 		ATH5K_ERR(ah, "failed to put device on warm reset\n");
645 		return -EIO;
646 	}
647 
648 	/* ...wakeup again!*/
649 	ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
650 	if (ret) {
651 		ATH5K_ERR(ah, "failed to put device on hold\n");
652 		return ret;
653 	}
654 
655 	return ret;
656 }
657 
658 /**
659  * ath5k_hw_nic_wakeup() - Force card out of sleep
660  * @ah: The &struct ath5k_hw
661  * @channel: The &struct ieee80211_channel
662  *
663  * Bring up MAC + PHY Chips and program PLL
664  * NOTE: Channel is NULL for the initial wakeup.
665  *
666  * Returns 0 on success, -EIO on hw failure or -EINVAL for false channel infos
667  */
668 int
669 ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel)
670 {
671 	struct pci_dev *pdev = ah->pdev;
672 	u32 turbo, mode, clock, bus_flags;
673 	int ret;
674 
675 	turbo = 0;
676 	mode = 0;
677 	clock = 0;
678 
679 	if ((ath5k_get_bus_type(ah) != ATH_AHB) || channel) {
680 		/* Wakeup the device */
681 		ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
682 		if (ret) {
683 			ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n");
684 			return ret;
685 		}
686 	}
687 
688 	/*
689 	 * Put chipset on warm reset...
690 	 *
691 	 * Note: putting PCI core on warm reset on PCI-E cards
692 	 * results card to hang and always return 0xffff... so
693 	 * we ignore that flag for PCI-E cards. On PCI cards
694 	 * this flag gets cleared after 64 PCI clocks.
695 	 */
696 	bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI;
697 
698 	if (ah->ah_version == AR5K_AR5210) {
699 		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
700 			AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
701 			AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
702 		usleep_range(2000, 2500);
703 	} else {
704 		if (ath5k_get_bus_type(ah) == ATH_AHB)
705 			ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU |
706 				AR5K_RESET_CTL_BASEBAND);
707 		else
708 			ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
709 				AR5K_RESET_CTL_BASEBAND | bus_flags);
710 	}
711 
712 	if (ret) {
713 		ATH5K_ERR(ah, "failed to reset the MAC Chip\n");
714 		return -EIO;
715 	}
716 
717 	/* ...wakeup again!...*/
718 	ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
719 	if (ret) {
720 		ATH5K_ERR(ah, "failed to resume the MAC Chip\n");
721 		return ret;
722 	}
723 
724 	/* ...reset configuration register on Wisoc ...
725 	 * ...clear reset control register and pull device out of
726 	 * warm reset on others */
727 	if (ath5k_get_bus_type(ah) == ATH_AHB)
728 		ret = ath5k_hw_wisoc_reset(ah, 0);
729 	else
730 		ret = ath5k_hw_nic_reset(ah, 0);
731 
732 	if (ret) {
733 		ATH5K_ERR(ah, "failed to warm reset the MAC Chip\n");
734 		return -EIO;
735 	}
736 
737 	/* On initialization skip PLL programming since we don't have
738 	 * a channel / mode set yet */
739 	if (!channel)
740 		return 0;
741 
742 	if (ah->ah_version != AR5K_AR5210) {
743 		/*
744 		 * Get channel mode flags
745 		 */
746 
747 		if (ah->ah_radio >= AR5K_RF5112) {
748 			mode = AR5K_PHY_MODE_RAD_RF5112;
749 			clock = AR5K_PHY_PLL_RF5112;
750 		} else {
751 			mode = AR5K_PHY_MODE_RAD_RF5111;	/*Zero*/
752 			clock = AR5K_PHY_PLL_RF5111;		/*Zero*/
753 		}
754 
755 		if (channel->band == NL80211_BAND_2GHZ) {
756 			mode |= AR5K_PHY_MODE_FREQ_2GHZ;
757 			clock |= AR5K_PHY_PLL_44MHZ;
758 
759 			if (channel->hw_value == AR5K_MODE_11B) {
760 				mode |= AR5K_PHY_MODE_MOD_CCK;
761 			} else {
762 				/* XXX Dynamic OFDM/CCK is not supported by the
763 				 * AR5211 so we set MOD_OFDM for plain g (no
764 				 * CCK headers) operation. We need to test
765 				 * this, 5211 might support ofdm-only g after
766 				 * all, there are also initial register values
767 				 * in the code for g mode (see initvals.c).
768 				 */
769 				if (ah->ah_version == AR5K_AR5211)
770 					mode |= AR5K_PHY_MODE_MOD_OFDM;
771 				else
772 					mode |= AR5K_PHY_MODE_MOD_DYN;
773 			}
774 		} else if (channel->band == NL80211_BAND_5GHZ) {
775 			mode |= (AR5K_PHY_MODE_FREQ_5GHZ |
776 				 AR5K_PHY_MODE_MOD_OFDM);
777 
778 			/* Different PLL setting for 5413 */
779 			if (ah->ah_radio == AR5K_RF5413)
780 				clock = AR5K_PHY_PLL_40MHZ_5413;
781 			else
782 				clock |= AR5K_PHY_PLL_40MHZ;
783 		} else {
784 			ATH5K_ERR(ah, "invalid radio frequency mode\n");
785 			return -EINVAL;
786 		}
787 
788 		/*XXX: Can bwmode be used with dynamic mode ?
789 		 * (I don't think it supports 44MHz) */
790 		/* On 2425 initvals TURBO_SHORT is not present */
791 		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
792 			turbo = AR5K_PHY_TURBO_MODE;
793 			if (ah->ah_radio != AR5K_RF2425)
794 				turbo |= AR5K_PHY_TURBO_SHORT;
795 		} else if (ah->ah_bwmode != AR5K_BWMODE_DEFAULT) {
796 			if (ah->ah_radio == AR5K_RF5413) {
797 				mode |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ?
798 					AR5K_PHY_MODE_HALF_RATE :
799 					AR5K_PHY_MODE_QUARTER_RATE;
800 			} else if (ah->ah_version == AR5K_AR5212) {
801 				clock |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ?
802 					AR5K_PHY_PLL_HALF_RATE :
803 					AR5K_PHY_PLL_QUARTER_RATE;
804 			}
805 		}
806 
807 	} else { /* Reset the device */
808 
809 		/* ...enable Atheros turbo mode if requested */
810 		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
811 			ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
812 					AR5K_PHY_TURBO);
813 	}
814 
815 	if (ah->ah_version != AR5K_AR5210) {
816 
817 		/* ...update PLL if needed */
818 		if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
819 			ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
820 			usleep_range(300, 350);
821 		}
822 
823 		/* ...set the PHY operating mode */
824 		ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
825 		ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
826 	}
827 
828 	return 0;
829 }
830 
831 
832 /**************************************\
833 * Post-initvals register modifications *
834 \**************************************/
835 
836 /**
837  * ath5k_hw_tweak_initval_settings() - Tweak initial settings
838  * @ah: The &struct ath5k_hw
839  * @channel: The &struct ieee80211_channel
840  *
841  * Some settings are not handled on initvals, e.g. bwmode
842  * settings, some phy settings, workarounds etc that in general
843  * don't fit anywhere else or are too small to introduce a separate
844  * function for each one. So we have this function to handle
845  * them all during reset and complete card's initialization.
846  */
847 static void
848 ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
849 				struct ieee80211_channel *channel)
850 {
851 	if (ah->ah_version == AR5K_AR5212 &&
852 	    ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
853 
854 		/* Setup ADC control */
855 		ath5k_hw_reg_write(ah,
856 				(AR5K_REG_SM(2,
857 				AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) |
858 				AR5K_REG_SM(2,
859 				AR5K_PHY_ADC_CTL_INBUFGAIN_ON) |
860 				AR5K_PHY_ADC_CTL_PWD_DAC_OFF |
861 				AR5K_PHY_ADC_CTL_PWD_ADC_OFF),
862 				AR5K_PHY_ADC_CTL);
863 
864 
865 
866 		/* Disable barker RSSI threshold */
867 		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
868 				AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR);
869 
870 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
871 			AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2);
872 
873 		/* Set the mute mask */
874 		ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
875 	}
876 
877 	/* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */
878 	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B)
879 		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH);
880 
881 	/* Enable DCU double buffering */
882 	if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B)
883 		AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
884 				AR5K_TXCFG_DCU_DBL_BUF_DIS);
885 
886 	/* Set fast ADC */
887 	if ((ah->ah_radio == AR5K_RF5413) ||
888 		(ah->ah_radio == AR5K_RF2317) ||
889 		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
890 		u32 fast_adc = true;
891 
892 		if (channel->center_freq == 2462 ||
893 		channel->center_freq == 2467)
894 			fast_adc = 0;
895 
896 		/* Only update if needed */
897 		if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc)
898 				ath5k_hw_reg_write(ah, fast_adc,
899 						AR5K_PHY_FAST_ADC);
900 	}
901 
902 	/* Fix for first revision of the RF5112 RF chipset */
903 	if (ah->ah_radio == AR5K_RF5112 &&
904 			ah->ah_radio_5ghz_revision <
905 			AR5K_SREV_RAD_5112A) {
906 		u32 data;
907 		ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
908 				AR5K_PHY_CCKTXCTL);
909 		if (channel->band == NL80211_BAND_5GHZ)
910 			data = 0xffb81020;
911 		else
912 			data = 0xffb80d20;
913 		ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
914 	}
915 
916 	if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
917 		/* Clear QCU/DCU clock gating register */
918 		ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
919 		/* Set DAC/ADC delays */
920 		ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311,
921 						AR5K_PHY_SCAL);
922 		/* Enable PCU FIFO corruption ECO */
923 		AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
924 					AR5K_DIAG_SW_ECO_ENABLE);
925 	}
926 
927 	if (ah->ah_bwmode) {
928 		/* Increase PHY switch and AGC settling time
929 		 * on turbo mode (ath5k_hw_commit_eeprom_settings
930 		 * will override settling time if available) */
931 		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
932 
933 			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
934 						AR5K_PHY_SETTLING_AGC,
935 						AR5K_AGC_SETTLING_TURBO);
936 
937 			/* XXX: Initvals indicate we only increase
938 			 * switch time on AR5212, 5211 and 5210
939 			 * only change agc time (bug?) */
940 			if (ah->ah_version == AR5K_AR5212)
941 				AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
942 						AR5K_PHY_SETTLING_SWITCH,
943 						AR5K_SWITCH_SETTLING_TURBO);
944 
945 			if (ah->ah_version == AR5K_AR5210) {
946 				/* Set Frame Control Register */
947 				ath5k_hw_reg_write(ah,
948 					(AR5K_PHY_FRAME_CTL_INI |
949 					AR5K_PHY_TURBO_MODE |
950 					AR5K_PHY_TURBO_SHORT | 0x2020),
951 					AR5K_PHY_FRAME_CTL_5210);
952 			}
953 		/* On 5413 PHY force window length for half/quarter rate*/
954 		} else if ((ah->ah_mac_srev >= AR5K_SREV_AR5424) &&
955 		(ah->ah_mac_srev <= AR5K_SREV_AR5414)) {
956 			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL_5211,
957 						AR5K_PHY_FRAME_CTL_WIN_LEN,
958 						3);
959 		}
960 	} else if (ah->ah_version == AR5K_AR5210) {
961 		/* Set Frame Control Register for normal operation */
962 		ath5k_hw_reg_write(ah, (AR5K_PHY_FRAME_CTL_INI | 0x1020),
963 						AR5K_PHY_FRAME_CTL_5210);
964 	}
965 }
966 
967 /**
968  * ath5k_hw_commit_eeprom_settings() - Commit settings from EEPROM
969  * @ah: The &struct ath5k_hw
970  * @channel: The &struct ieee80211_channel
971  *
972  * Use settings stored on EEPROM to properly initialize the card
973  * based on various infos and per-mode calibration data.
974  */
975 static void
976 ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
977 		struct ieee80211_channel *channel)
978 {
979 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
980 	s16 cck_ofdm_pwr_delta;
981 	u8 ee_mode;
982 
983 	/* TODO: Add support for AR5210 EEPROM */
984 	if (ah->ah_version == AR5K_AR5210)
985 		return;
986 
987 	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
988 
989 	/* Adjust power delta for channel 14 */
990 	if (channel->center_freq == 2484)
991 		cck_ofdm_pwr_delta =
992 			((ee->ee_cck_ofdm_power_delta -
993 			ee->ee_scaled_cck_delta) * 2) / 10;
994 	else
995 		cck_ofdm_pwr_delta =
996 			(ee->ee_cck_ofdm_power_delta * 2) / 10;
997 
998 	/* Set CCK to OFDM power delta on tx power
999 	 * adjustment register */
1000 	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
1001 		if (channel->hw_value == AR5K_MODE_11G)
1002 			ath5k_hw_reg_write(ah,
1003 			AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1),
1004 				AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) |
1005 			AR5K_REG_SM((cck_ofdm_pwr_delta * -1),
1006 				AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX),
1007 				AR5K_PHY_TX_PWR_ADJ);
1008 		else
1009 			ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ);
1010 	} else {
1011 		/* For older revs we scale power on sw during tx power
1012 		 * setup */
1013 		ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta;
1014 		ah->ah_txpower.txp_cck_ofdm_gainf_delta =
1015 						ee->ee_cck_ofdm_gain_delta;
1016 	}
1017 
1018 	/* XXX: necessary here? is called from ath5k_hw_set_antenna_mode()
1019 	 * too */
1020 	ath5k_hw_set_antenna_switch(ah, ee_mode);
1021 
1022 	/* Noise floor threshold */
1023 	ath5k_hw_reg_write(ah,
1024 		AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
1025 		AR5K_PHY_NFTHRES);
1026 
1027 	if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) &&
1028 	(ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) {
1029 		/* Switch settling time (Turbo) */
1030 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
1031 				AR5K_PHY_SETTLING_SWITCH,
1032 				ee->ee_switch_settling_turbo[ee_mode]);
1033 
1034 		/* Tx/Rx attenuation (Turbo) */
1035 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
1036 				AR5K_PHY_GAIN_TXRX_ATTEN,
1037 				ee->ee_atn_tx_rx_turbo[ee_mode]);
1038 
1039 		/* ADC/PGA desired size (Turbo) */
1040 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
1041 				AR5K_PHY_DESIRED_SIZE_ADC,
1042 				ee->ee_adc_desired_size_turbo[ee_mode]);
1043 
1044 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
1045 				AR5K_PHY_DESIRED_SIZE_PGA,
1046 				ee->ee_pga_desired_size_turbo[ee_mode]);
1047 
1048 		/* Tx/Rx margin (Turbo) */
1049 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
1050 				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
1051 				ee->ee_margin_tx_rx_turbo[ee_mode]);
1052 
1053 	} else {
1054 		/* Switch settling time */
1055 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
1056 				AR5K_PHY_SETTLING_SWITCH,
1057 				ee->ee_switch_settling[ee_mode]);
1058 
1059 		/* Tx/Rx attenuation */
1060 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
1061 				AR5K_PHY_GAIN_TXRX_ATTEN,
1062 				ee->ee_atn_tx_rx[ee_mode]);
1063 
1064 		/* ADC/PGA desired size */
1065 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
1066 				AR5K_PHY_DESIRED_SIZE_ADC,
1067 				ee->ee_adc_desired_size[ee_mode]);
1068 
1069 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
1070 				AR5K_PHY_DESIRED_SIZE_PGA,
1071 				ee->ee_pga_desired_size[ee_mode]);
1072 
1073 		/* Tx/Rx margin */
1074 		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
1075 			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
1076 				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
1077 				ee->ee_margin_tx_rx[ee_mode]);
1078 	}
1079 
1080 	/* XPA delays */
1081 	ath5k_hw_reg_write(ah,
1082 		(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
1083 		(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
1084 		(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
1085 		(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
1086 
1087 	/* XLNA delay */
1088 	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3,
1089 			AR5K_PHY_RF_CTL3_TXE2XLNA_ON,
1090 			ee->ee_tx_end2xlna_enable[ee_mode]);
1091 
1092 	/* Thresh64 (ANI) */
1093 	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF,
1094 			AR5K_PHY_NF_THRESH62,
1095 			ee->ee_thr_62[ee_mode]);
1096 
1097 	/* False detect backoff for channels
1098 	 * that have spur noise. Write the new
1099 	 * cyclic power RSSI threshold. */
1100 	if (ath5k_hw_chan_has_spur_noise(ah, channel))
1101 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
1102 				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
1103 				AR5K_INIT_CYCRSSI_THR1 +
1104 				ee->ee_false_detect[ee_mode]);
1105 	else
1106 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
1107 				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
1108 				AR5K_INIT_CYCRSSI_THR1);
1109 
1110 	/* I/Q correction (set enable bit last to match HAL sources) */
1111 	/* TODO: Per channel i/q infos ? */
1112 	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
1113 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF,
1114 			    ee->ee_i_cal[ee_mode]);
1115 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF,
1116 			    ee->ee_q_cal[ee_mode]);
1117 		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
1118 	}
1119 
1120 	/* Heavy clipping -disable for now */
1121 	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
1122 		ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE);
1123 }
1124 
1125 
1126 /*********************\
1127 * Main reset function *
1128 \*********************/
1129 
1130 /**
1131  * ath5k_hw_reset() - The main reset function
1132  * @ah: The &struct ath5k_hw
1133  * @op_mode: One of enum nl80211_iftype
1134  * @channel: The &struct ieee80211_channel
1135  * @fast: Enable fast channel switching
1136  * @skip_pcu: Skip pcu initialization
1137  *
1138  * This is the function we call each time we want to (re)initialize the
1139  * card and pass new settings to hw. We also call it when hw runs into
1140  * trouble to make it come back to a working state.
1141  *
1142  * Returns 0 on success, -EINVAL on false op_mode or channel infos, or -EIO
1143  * on failure.
1144  */
1145 int
1146 ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
1147 		struct ieee80211_channel *channel, bool fast, bool skip_pcu)
1148 {
1149 	u32 s_seq[10], s_led[3], tsf_up, tsf_lo;
1150 	u8 mode;
1151 	int i, ret;
1152 
1153 	tsf_up = 0;
1154 	tsf_lo = 0;
1155 	mode = 0;
1156 
1157 	/*
1158 	 * Sanity check for fast flag
1159 	 * Fast channel change only available
1160 	 * on AR2413/AR5413.
1161 	 */
1162 	if (fast && (ah->ah_radio != AR5K_RF2413) &&
1163 	(ah->ah_radio != AR5K_RF5413))
1164 		fast = false;
1165 
1166 	/* Disable sleep clock operation
1167 	 * to avoid register access delay on certain
1168 	 * PHY registers */
1169 	if (ah->ah_version == AR5K_AR5212)
1170 		ath5k_hw_set_sleep_clock(ah, false);
1171 
1172 	mode = channel->hw_value;
1173 	switch (mode) {
1174 	case AR5K_MODE_11A:
1175 		break;
1176 	case AR5K_MODE_11G:
1177 		if (ah->ah_version <= AR5K_AR5211) {
1178 			ATH5K_ERR(ah,
1179 				"G mode not available on 5210/5211");
1180 			return -EINVAL;
1181 		}
1182 		break;
1183 	case AR5K_MODE_11B:
1184 		if (ah->ah_version < AR5K_AR5211) {
1185 			ATH5K_ERR(ah,
1186 				"B mode not available on 5210");
1187 			return -EINVAL;
1188 		}
1189 		break;
1190 	default:
1191 		ATH5K_ERR(ah,
1192 			"invalid channel: %d\n", channel->center_freq);
1193 		return -EINVAL;
1194 	}
1195 
1196 	/*
1197 	 * If driver requested fast channel change and DMA has stopped
1198 	 * go on. If it fails continue with a normal reset.
1199 	 */
1200 	if (fast) {
1201 		ret = ath5k_hw_phy_init(ah, channel, mode, true);
1202 		if (ret) {
1203 			ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
1204 				"fast chan change failed, falling back to normal reset\n");
1205 			/* Non fatal, can happen eg.
1206 			 * on mode change */
1207 			ret = 0;
1208 		} else {
1209 			ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
1210 				"fast chan change successful\n");
1211 			return 0;
1212 		}
1213 	}
1214 
1215 	/*
1216 	 * Save some registers before a reset
1217 	 */
1218 	if (ah->ah_version != AR5K_AR5210) {
1219 		/*
1220 		 * Save frame sequence count
1221 		 * For revs. after Oahu, only save
1222 		 * seq num for DCU 0 (Global seq num)
1223 		 */
1224 		if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
1225 
1226 			for (i = 0; i < 10; i++)
1227 				s_seq[i] = ath5k_hw_reg_read(ah,
1228 					AR5K_QUEUE_DCU_SEQNUM(i));
1229 
1230 		} else {
1231 			s_seq[0] = ath5k_hw_reg_read(ah,
1232 					AR5K_QUEUE_DCU_SEQNUM(0));
1233 		}
1234 
1235 		/* TSF accelerates on AR5211 during reset
1236 		 * As a workaround save it here and restore
1237 		 * it later so that it's back in time after
1238 		 * reset. This way it'll get re-synced on the
1239 		 * next beacon without breaking ad-hoc.
1240 		 *
1241 		 * On AR5212 TSF is almost preserved across a
1242 		 * reset so it stays back in time anyway and
1243 		 * we don't have to save/restore it.
1244 		 *
1245 		 * XXX: Since this breaks power saving we have
1246 		 * to disable power saving until we receive the
1247 		 * next beacon, so we can resync beacon timers */
1248 		if (ah->ah_version == AR5K_AR5211) {
1249 			tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
1250 			tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
1251 		}
1252 	}
1253 
1254 
1255 	/*GPIOs*/
1256 	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
1257 					AR5K_PCICFG_LEDSTATE;
1258 	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
1259 	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
1260 
1261 
1262 	/*
1263 	 * Since we are going to write rf buffer
1264 	 * check if we have any pending gain_F
1265 	 * optimization settings
1266 	 */
1267 	if (ah->ah_version == AR5K_AR5212 &&
1268 	(ah->ah_radio <= AR5K_RF5112)) {
1269 		if (!fast && ah->ah_rf_banks != NULL)
1270 				ath5k_hw_gainf_calibrate(ah);
1271 	}
1272 
1273 	/* Wakeup the device */
1274 	ret = ath5k_hw_nic_wakeup(ah, channel);
1275 	if (ret)
1276 		return ret;
1277 
1278 	/* PHY access enable */
1279 	if (ah->ah_mac_srev >= AR5K_SREV_AR5211)
1280 		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
1281 	else
1282 		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40,
1283 							AR5K_PHY(0));
1284 
1285 	/* Write initial settings */
1286 	ret = ath5k_hw_write_initvals(ah, mode, skip_pcu);
1287 	if (ret)
1288 		return ret;
1289 
1290 	/* Initialize core clock settings */
1291 	ath5k_hw_init_core_clock(ah);
1292 
1293 	/*
1294 	 * Tweak initval settings for revised
1295 	 * chipsets and add some more config
1296 	 * bits
1297 	 */
1298 	ath5k_hw_tweak_initval_settings(ah, channel);
1299 
1300 	/* Commit values from EEPROM */
1301 	ath5k_hw_commit_eeprom_settings(ah, channel);
1302 
1303 
1304 	/*
1305 	 * Restore saved values
1306 	 */
1307 
1308 	/* Seqnum, TSF */
1309 	if (ah->ah_version != AR5K_AR5210) {
1310 		if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
1311 			for (i = 0; i < 10; i++)
1312 				ath5k_hw_reg_write(ah, s_seq[i],
1313 					AR5K_QUEUE_DCU_SEQNUM(i));
1314 		} else {
1315 			ath5k_hw_reg_write(ah, s_seq[0],
1316 				AR5K_QUEUE_DCU_SEQNUM(0));
1317 		}
1318 
1319 		if (ah->ah_version == AR5K_AR5211) {
1320 			ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
1321 			ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
1322 		}
1323 	}
1324 
1325 	/* Ledstate */
1326 	AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
1327 
1328 	/* Gpio settings */
1329 	ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
1330 	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
1331 
1332 	/*
1333 	 * Initialize PCU
1334 	 */
1335 	ath5k_hw_pcu_init(ah, op_mode);
1336 
1337 	/*
1338 	 * Initialize PHY
1339 	 */
1340 	ret = ath5k_hw_phy_init(ah, channel, mode, false);
1341 	if (ret) {
1342 		ATH5K_ERR(ah,
1343 			"failed to initialize PHY (%i) !\n", ret);
1344 		return ret;
1345 	}
1346 
1347 	/*
1348 	 * Configure QCUs/DCUs
1349 	 */
1350 	ret = ath5k_hw_init_queues(ah);
1351 	if (ret)
1352 		return ret;
1353 
1354 
1355 	/*
1356 	 * Initialize DMA/Interrupts
1357 	 */
1358 	ath5k_hw_dma_init(ah);
1359 
1360 
1361 	/*
1362 	 * Enable 32KHz clock function for AR5212+ chips
1363 	 * Set clocks to 32KHz operation and use an
1364 	 * external 32KHz crystal when sleeping if one
1365 	 * exists.
1366 	 * Disabled by default because it is also disabled in
1367 	 * other drivers and it is known to cause stability
1368 	 * issues on some devices
1369 	 */
1370 	if (ah->ah_use_32khz_clock && ah->ah_version == AR5K_AR5212 &&
1371 	    op_mode != NL80211_IFTYPE_AP)
1372 		ath5k_hw_set_sleep_clock(ah, true);
1373 
1374 	/*
1375 	 * Disable beacons and reset the TSF
1376 	 */
1377 	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
1378 	ath5k_hw_reset_tsf(ah);
1379 	return 0;
1380 }
1381