1 /* 2 * Copyright (c) 2008-2009 Atheros Communications Inc. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15 */ 16 17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 18 19 #include <linux/nl80211.h> 20 #include <linux/pci.h> 21 #include <linux/etherdevice.h> 22 #include <linux/module.h> 23 #include "../ath.h" 24 #include "ath5k.h" 25 #include "debug.h" 26 #include "base.h" 27 #include "reg.h" 28 29 /* Known PCI ids */ 30 static const struct pci_device_id ath5k_pci_id_table[] = { 31 { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */ 32 { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */ 33 { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/ 34 { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */ 35 { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */ 36 { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */ 37 { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */ 38 { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */ 39 { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */ 40 { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */ 41 { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */ 42 { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */ 43 { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */ 44 { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */ 45 { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */ 46 { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */ 47 { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */ 48 { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */ 49 { PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */ 50 { 0 } 51 }; 52 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); 53 54 /* return bus cachesize in 4B word units */ 55 static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz) 56 { 57 struct ath5k_hw *ah = (struct ath5k_hw *) common->priv; 58 u8 u8tmp; 59 60 pci_read_config_byte(ah->pdev, PCI_CACHE_LINE_SIZE, &u8tmp); 61 *csz = (int)u8tmp; 62 63 /* 64 * This check was put in to avoid "unpleasant" consequences if 65 * the bootrom has not fully initialized all PCI devices. 66 * Sometimes the cache line size register is not set 67 */ 68 69 if (*csz == 0) 70 *csz = L1_CACHE_BYTES >> 2; /* Use the default size */ 71 } 72 73 /* 74 * Read from eeprom 75 */ 76 static bool 77 ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data) 78 { 79 struct ath5k_hw *ah = (struct ath5k_hw *) common->ah; 80 u32 status, timeout; 81 82 /* 83 * Initialize EEPROM access 84 */ 85 if (ah->ah_version == AR5K_AR5210) { 86 AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); 87 (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); 88 } else { 89 ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); 90 AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, 91 AR5K_EEPROM_CMD_READ); 92 } 93 94 for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { 95 status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); 96 if (status & AR5K_EEPROM_STAT_RDDONE) { 97 if (status & AR5K_EEPROM_STAT_RDERR) 98 return false; 99 *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & 100 0xffff); 101 return true; 102 } 103 usleep_range(15, 20); 104 } 105 106 return false; 107 } 108 109 int ath5k_hw_read_srev(struct ath5k_hw *ah) 110 { 111 ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV); 112 return 0; 113 } 114 115 /* 116 * Read the MAC address from eeprom or platform_data 117 */ 118 static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) 119 { 120 u8 mac_d[ETH_ALEN] = {}; 121 u32 total, offset; 122 u16 data; 123 int octet; 124 125 AR5K_EEPROM_READ(0x20, data); 126 127 for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { 128 AR5K_EEPROM_READ(offset, data); 129 130 total += data; 131 mac_d[octet + 1] = data & 0xff; 132 mac_d[octet] = data >> 8; 133 octet += 2; 134 } 135 136 if (!total || total == 3 * 0xffff) 137 return -EINVAL; 138 139 memcpy(mac, mac_d, ETH_ALEN); 140 141 return 0; 142 } 143 144 145 /* Common ath_bus_opts structure */ 146 static const struct ath_bus_ops ath_pci_bus_ops = { 147 .ath_bus_type = ATH_PCI, 148 .read_cachesize = ath5k_pci_read_cachesize, 149 .eeprom_read = ath5k_pci_eeprom_read, 150 .eeprom_read_mac = ath5k_pci_eeprom_read_mac, 151 }; 152 153 /********************\ 154 * PCI Initialization * 155 \********************/ 156 157 static int 158 ath5k_pci_probe(struct pci_dev *pdev, 159 const struct pci_device_id *id) 160 { 161 void __iomem *mem; 162 struct ath5k_hw *ah; 163 struct ieee80211_hw *hw; 164 int ret; 165 u8 csz; 166 167 /* 168 * L0s needs to be disabled on all ath5k cards. 169 * 170 * For distributions shipping with CONFIG_PCIEASPM (this will be enabled 171 * by default in the future in 2.6.36) this will also mean both L1 and 172 * L0s will be disabled when a pre 1.1 PCIe device is detected. We do 173 * know L1 works correctly even for all ath5k pre 1.1 PCIe devices 174 * though but cannot currently undue the effect of a blacklist, for 175 * details you can read pcie_aspm_sanity_check() and see how it adjusts 176 * the device link capability. 177 * 178 * It may be possible in the future to implement some PCI API to allow 179 * drivers to override blacklists for pre 1.1 PCIe but for now it is 180 * best to accept that both L0s and L1 will be disabled completely for 181 * distributions shipping with CONFIG_PCIEASPM rather than having this 182 * issue present. Motivation for adding this new API will be to help 183 * with power consumption for some of these devices. 184 */ 185 pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); 186 187 ret = pci_enable_device(pdev); 188 if (ret) { 189 dev_err(&pdev->dev, "can't enable device\n"); 190 goto err; 191 } 192 193 /* XXX 32-bit addressing only */ 194 ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); 195 if (ret) { 196 dev_err(&pdev->dev, "32-bit DMA not available\n"); 197 goto err_dis; 198 } 199 200 /* 201 * Cache line size is used to size and align various 202 * structures used to communicate with the hardware. 203 */ 204 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); 205 if (csz == 0) { 206 /* 207 * Linux 2.4.18 (at least) writes the cache line size 208 * register as a 16-bit wide register which is wrong. 209 * We must have this setup properly for rx buffer 210 * DMA to work so force a reasonable value here if it 211 * comes up zero. 212 */ 213 csz = L1_CACHE_BYTES >> 2; 214 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); 215 } 216 /* 217 * The default setting of latency timer yields poor results, 218 * set it to the value used by other systems. It may be worth 219 * tweaking this setting more. 220 */ 221 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); 222 223 /* Enable bus mastering */ 224 pci_set_master(pdev); 225 226 /* 227 * Disable the RETRY_TIMEOUT register (0x41) to keep 228 * PCI Tx retries from interfering with C3 CPU state. 229 */ 230 pci_write_config_byte(pdev, 0x41, 0); 231 232 ret = pci_request_region(pdev, 0, "ath5k"); 233 if (ret) { 234 dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); 235 goto err_dis; 236 } 237 238 mem = pci_iomap(pdev, 0, 0); 239 if (!mem) { 240 dev_err(&pdev->dev, "cannot remap PCI memory region\n"); 241 ret = -EIO; 242 goto err_reg; 243 } 244 245 /* 246 * Allocate hw (mac80211 main struct) 247 * and hw->priv (driver private data) 248 */ 249 hw = ieee80211_alloc_hw(sizeof(*ah), &ath5k_hw_ops); 250 if (hw == NULL) { 251 dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); 252 ret = -ENOMEM; 253 goto err_map; 254 } 255 256 dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); 257 258 ah = hw->priv; 259 ah->hw = hw; 260 ah->pdev = pdev; 261 ah->dev = &pdev->dev; 262 ah->irq = pdev->irq; 263 ah->devid = id->device; 264 ah->iobase = mem; /* So we can unmap it on detach */ 265 266 /* Initialize */ 267 ret = ath5k_init_ah(ah, &ath_pci_bus_ops); 268 if (ret) 269 goto err_free; 270 271 /* Set private data */ 272 pci_set_drvdata(pdev, hw); 273 274 return 0; 275 err_free: 276 ieee80211_free_hw(hw); 277 err_map: 278 pci_iounmap(pdev, mem); 279 err_reg: 280 pci_release_region(pdev, 0); 281 err_dis: 282 pci_disable_device(pdev); 283 err: 284 return ret; 285 } 286 287 static void 288 ath5k_pci_remove(struct pci_dev *pdev) 289 { 290 struct ieee80211_hw *hw = pci_get_drvdata(pdev); 291 struct ath5k_hw *ah = hw->priv; 292 293 ath5k_deinit_ah(ah); 294 pci_iounmap(pdev, ah->iobase); 295 pci_release_region(pdev, 0); 296 pci_disable_device(pdev); 297 ieee80211_free_hw(hw); 298 } 299 300 #ifdef CONFIG_PM_SLEEP 301 static int ath5k_pci_suspend(struct device *dev) 302 { 303 struct ieee80211_hw *hw = dev_get_drvdata(dev); 304 struct ath5k_hw *ah = hw->priv; 305 306 ath5k_led_off(ah); 307 return 0; 308 } 309 310 static int ath5k_pci_resume(struct device *dev) 311 { 312 struct pci_dev *pdev = to_pci_dev(dev); 313 struct ieee80211_hw *hw = pci_get_drvdata(pdev); 314 struct ath5k_hw *ah = hw->priv; 315 316 /* 317 * Suspend/Resume resets the PCI configuration space, so we have to 318 * re-disable the RETRY_TIMEOUT register (0x41) to keep 319 * PCI Tx retries from interfering with C3 CPU state 320 */ 321 pci_write_config_byte(pdev, 0x41, 0); 322 323 ath5k_led_enable(ah); 324 return 0; 325 } 326 327 static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); 328 #define ATH5K_PM_OPS (&ath5k_pm_ops) 329 #else 330 #define ATH5K_PM_OPS NULL 331 #endif /* CONFIG_PM_SLEEP */ 332 333 static struct pci_driver ath5k_pci_driver = { 334 .name = KBUILD_MODNAME, 335 .id_table = ath5k_pci_id_table, 336 .probe = ath5k_pci_probe, 337 .remove = ath5k_pci_remove, 338 .driver.pm = ATH5K_PM_OPS, 339 }; 340 341 module_pci_driver(ath5k_pci_driver); 342