1 /* 2 * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> 3 * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> 4 * 5 * Permission to use, copy, modify, and distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #ifndef _ATH5K_H 19 #define _ATH5K_H 20 21 /* TODO: Clean up channel debugging (doesn't work anyway) and start 22 * working on reg. control code using all available eeprom information 23 * (rev. engineering needed) */ 24 #define CHAN_DEBUG 0 25 26 #include <linux/io.h> 27 #include <linux/interrupt.h> 28 #include <linux/types.h> 29 #include <linux/average.h> 30 #include <linux/leds.h> 31 #include <net/mac80211.h> 32 33 /* RX/TX descriptor hw structs 34 * TODO: Driver part should only see sw structs */ 35 #include "desc.h" 36 37 /* EEPROM structs/offsets 38 * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) 39 * and clean up common bits, then introduce set/get functions in eeprom.c */ 40 #include "eeprom.h" 41 #include "debug.h" 42 #include "../ath.h" 43 #include "ani.h" 44 45 /* PCI IDs */ 46 #define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ 47 #define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ 48 #define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ 49 #define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ 50 #define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ 51 #define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ 52 #define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ 53 #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ 54 #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ 55 #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ 56 #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ 57 #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ 58 #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ 59 #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ 60 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ 61 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ 62 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ 63 #define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ 64 #define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ 65 #define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ 66 #define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ 67 #define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ 68 #define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ 69 #define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ 70 #define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ 71 #define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ 72 #define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ 73 #define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ 74 75 /****************************\ 76 GENERIC DRIVER DEFINITIONS 77 \****************************/ 78 79 #define ATH5K_PRINTF(fmt, ...) \ 80 printk(KERN_WARNING "%s: " fmt, __func__, ##__VA_ARGS__) 81 82 #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ 83 printk(_level "ath5k %s: " _fmt, \ 84 ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ 85 ##__VA_ARGS__) 86 87 #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ 88 if (net_ratelimit()) \ 89 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ 90 } while (0) 91 92 #define ATH5K_INFO(_sc, _fmt, ...) \ 93 ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) 94 95 #define ATH5K_WARN(_sc, _fmt, ...) \ 96 ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) 97 98 #define ATH5K_ERR(_sc, _fmt, ...) \ 99 ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) 100 101 /* 102 * AR5K REGISTER ACCESS 103 */ 104 105 /* Some macros to read/write fields */ 106 107 /* First shift, then mask */ 108 #define AR5K_REG_SM(_val, _flags) \ 109 (((_val) << _flags##_S) & (_flags)) 110 111 /* First mask, then shift */ 112 #define AR5K_REG_MS(_val, _flags) \ 113 (((_val) & (_flags)) >> _flags##_S) 114 115 /* Some registers can hold multiple values of interest. For this 116 * reason when we want to write to these registers we must first 117 * retrieve the values which we do not want to clear (lets call this 118 * old_data) and then set the register with this and our new_value: 119 * ( old_data | new_value) */ 120 #define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ 121 ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ 122 (((_val) << _flags##_S) & (_flags)), _reg) 123 124 #define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ 125 ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ 126 (_mask)) | (_flags), _reg) 127 128 #define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ 129 ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) 130 131 #define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ 132 ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) 133 134 /* Access QCU registers per queue */ 135 #define AR5K_REG_READ_Q(ah, _reg, _queue) \ 136 (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ 137 138 #define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ 139 ath5k_hw_reg_write(ah, (1 << _queue), _reg) 140 141 #define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ 142 _reg |= 1 << _queue; \ 143 } while (0) 144 145 #define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ 146 _reg &= ~(1 << _queue); \ 147 } while (0) 148 149 /* Used while writing initvals */ 150 #define AR5K_REG_WAIT(_i) do { \ 151 if (_i % 64) \ 152 udelay(1); \ 153 } while (0) 154 155 /* 156 * Some tunable values (these should be changeable by the user) 157 * TODO: Make use of them and add more options OR use debug/configfs 158 */ 159 #define AR5K_TUNE_DMA_BEACON_RESP 2 160 #define AR5K_TUNE_SW_BEACON_RESP 10 161 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 162 #define AR5K_TUNE_MIN_TX_FIFO_THRES 1 163 #define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) 164 #define AR5K_TUNE_REGISTER_TIMEOUT 20000 165 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to 166 * be the max value. */ 167 #define AR5K_TUNE_RSSI_THRES 129 168 /* This must be set when setting the RSSI threshold otherwise it can 169 * prevent a reset. If AR5K_RSSI_THR is read after writing to it 170 * the BMISS_THRES will be seen as 0, seems hardware doesn't keep 171 * track of it. Max value depends on hardware. For AR5210 this is just 7. 172 * For AR5211+ this seems to be up to 255. */ 173 #define AR5K_TUNE_BMISS_THRES 7 174 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 175 #define AR5K_TUNE_BEACON_INTERVAL 100 176 #define AR5K_TUNE_AIFS 2 177 #define AR5K_TUNE_AIFS_11B 2 178 #define AR5K_TUNE_AIFS_XR 0 179 #define AR5K_TUNE_CWMIN 15 180 #define AR5K_TUNE_CWMIN_11B 31 181 #define AR5K_TUNE_CWMIN_XR 3 182 #define AR5K_TUNE_CWMAX 1023 183 #define AR5K_TUNE_CWMAX_11B 1023 184 #define AR5K_TUNE_CWMAX_XR 7 185 #define AR5K_TUNE_NOISE_FLOOR -72 186 #define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95 187 #define AR5K_TUNE_MAX_TXPOWER 63 188 #define AR5K_TUNE_DEFAULT_TXPOWER 25 189 #define AR5K_TUNE_TPC_TXPOWER false 190 #define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */ 191 #define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */ 192 #define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ 193 #define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ 194 195 #define AR5K_INIT_CARR_SENSE_EN 1 196 197 /*Swap RX/TX Descriptor for big endian archs*/ 198 #if defined(__BIG_ENDIAN) 199 #define AR5K_INIT_CFG ( \ 200 AR5K_CFG_SWTD | AR5K_CFG_SWRD \ 201 ) 202 #else 203 #define AR5K_INIT_CFG 0x00000000 204 #endif 205 206 /* Initial values */ 207 #define AR5K_INIT_CYCRSSI_THR1 2 208 209 /* Tx retry limit defaults from standard */ 210 #define AR5K_INIT_RETRY_SHORT 7 211 #define AR5K_INIT_RETRY_LONG 4 212 213 /* Slot time */ 214 #define AR5K_INIT_SLOT_TIME_TURBO 6 215 #define AR5K_INIT_SLOT_TIME_DEFAULT 9 216 #define AR5K_INIT_SLOT_TIME_HALF_RATE 13 217 #define AR5K_INIT_SLOT_TIME_QUARTER_RATE 21 218 #define AR5K_INIT_SLOT_TIME_B 20 219 #define AR5K_SLOT_TIME_MAX 0xffff 220 221 /* SIFS */ 222 #define AR5K_INIT_SIFS_TURBO 6 223 #define AR5K_INIT_SIFS_DEFAULT_BG 10 224 #define AR5K_INIT_SIFS_DEFAULT_A 16 225 #define AR5K_INIT_SIFS_HALF_RATE 32 226 #define AR5K_INIT_SIFS_QUARTER_RATE 64 227 228 /* Used to calculate tx time for non 5/10/40MHz 229 * operation */ 230 /* It's preamble time + signal time (16 + 4) */ 231 #define AR5K_INIT_OFDM_PREAMPLE_TIME 20 232 /* Preamble time for 40MHz (turbo) operation (min ?) */ 233 #define AR5K_INIT_OFDM_PREAMBLE_TIME_MIN 14 234 #define AR5K_INIT_OFDM_SYMBOL_TIME 4 235 #define AR5K_INIT_OFDM_PLCP_BITS 22 236 237 /* Rx latency for 5 and 10MHz operation (max ?) */ 238 #define AR5K_INIT_RX_LAT_MAX 63 239 /* Tx latencies from initvals (5212 only but no problem 240 * because we only tweak them on 5212) */ 241 #define AR5K_INIT_TX_LAT_A 54 242 #define AR5K_INIT_TX_LAT_BG 384 243 /* Tx latency for 40MHz (turbo) operation (min ?) */ 244 #define AR5K_INIT_TX_LAT_MIN 32 245 /* Default Tx/Rx latencies (same for 5211)*/ 246 #define AR5K_INIT_TX_LATENCY_5210 54 247 #define AR5K_INIT_RX_LATENCY_5210 29 248 249 /* Tx frame to Tx data start delay */ 250 #define AR5K_INIT_TXF2TXD_START_DEFAULT 14 251 #define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12 252 #define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13 253 254 /* We need to increase PHY switch and agc settling time 255 * on turbo mode */ 256 #define AR5K_SWITCH_SETTLING 5760 257 #define AR5K_SWITCH_SETTLING_TURBO 7168 258 259 #define AR5K_AGC_SETTLING 28 260 /* 38 on 5210 but shouldn't matter */ 261 #define AR5K_AGC_SETTLING_TURBO 37 262 263 264 265 /*****************************\ 266 * GENERIC CHIPSET DEFINITIONS * 267 \*****************************/ 268 269 /** 270 * enum ath5k_version - MAC Chips 271 * @AR5K_AR5210: AR5210 (Crete) 272 * @AR5K_AR5211: AR5211 (Oahu/Maui) 273 * @AR5K_AR5212: AR5212 (Venice) and newer 274 */ 275 enum ath5k_version { 276 AR5K_AR5210 = 0, 277 AR5K_AR5211 = 1, 278 AR5K_AR5212 = 2, 279 }; 280 281 /** 282 * enum ath5k_radio - PHY Chips 283 * @AR5K_RF5110: RF5110 (Fez) 284 * @AR5K_RF5111: RF5111 (Sombrero) 285 * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2) 286 * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite) 287 * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor) 288 * @AR5K_RF2316: RF2315/2316 (Cobra SoC) 289 * @AR5K_RF2317: RF2317 (Spider SoC) 290 * @AR5K_RF2425: RF2425/2417 (Swan/Nalla) 291 */ 292 enum ath5k_radio { 293 AR5K_RF5110 = 0, 294 AR5K_RF5111 = 1, 295 AR5K_RF5112 = 2, 296 AR5K_RF2413 = 3, 297 AR5K_RF5413 = 4, 298 AR5K_RF2316 = 5, 299 AR5K_RF2317 = 6, 300 AR5K_RF2425 = 7, 301 }; 302 303 /* 304 * Common silicon revision/version values 305 */ 306 307 #define AR5K_SREV_UNKNOWN 0xffff 308 309 #define AR5K_SREV_AR5210 0x00 /* Crete */ 310 #define AR5K_SREV_AR5311 0x10 /* Maui 1 */ 311 #define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ 312 #define AR5K_SREV_AR5311B 0x30 /* Spirit */ 313 #define AR5K_SREV_AR5211 0x40 /* Oahu */ 314 #define AR5K_SREV_AR5212 0x50 /* Venice */ 315 #define AR5K_SREV_AR5312_R2 0x52 /* AP31 */ 316 #define AR5K_SREV_AR5212_V4 0x54 /* ??? */ 317 #define AR5K_SREV_AR5213 0x55 /* ??? */ 318 #define AR5K_SREV_AR5312_R7 0x57 /* AP30 */ 319 #define AR5K_SREV_AR2313_R8 0x58 /* AP43 */ 320 #define AR5K_SREV_AR5213A 0x59 /* Hainan */ 321 #define AR5K_SREV_AR2413 0x78 /* Griffin lite */ 322 #define AR5K_SREV_AR2414 0x70 /* Griffin */ 323 #define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ 324 #define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ 325 #define AR5K_SREV_AR5424 0x90 /* Condor */ 326 #define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ 327 #define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ 328 #define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ 329 #define AR5K_SREV_AR5414 0xa0 /* Eagle */ 330 #define AR5K_SREV_AR2415 0xb0 /* Talon */ 331 #define AR5K_SREV_AR5416 0xc0 /* PCI-E */ 332 #define AR5K_SREV_AR5418 0xca /* PCI-E */ 333 #define AR5K_SREV_AR2425 0xe0 /* Swan */ 334 #define AR5K_SREV_AR2417 0xf0 /* Nala */ 335 336 #define AR5K_SREV_RAD_5110 0x00 337 #define AR5K_SREV_RAD_5111 0x10 338 #define AR5K_SREV_RAD_5111A 0x15 339 #define AR5K_SREV_RAD_2111 0x20 340 #define AR5K_SREV_RAD_5112 0x30 341 #define AR5K_SREV_RAD_5112A 0x35 342 #define AR5K_SREV_RAD_5112B 0x36 343 #define AR5K_SREV_RAD_2112 0x40 344 #define AR5K_SREV_RAD_2112A 0x45 345 #define AR5K_SREV_RAD_2112B 0x46 346 #define AR5K_SREV_RAD_2413 0x50 347 #define AR5K_SREV_RAD_5413 0x60 348 #define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ 349 #define AR5K_SREV_RAD_2317 0x80 350 #define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ 351 #define AR5K_SREV_RAD_2425 0xa2 352 #define AR5K_SREV_RAD_5133 0xc0 353 354 #define AR5K_SREV_PHY_5211 0x30 355 #define AR5K_SREV_PHY_5212 0x41 356 #define AR5K_SREV_PHY_5212A 0x42 357 #define AR5K_SREV_PHY_5212B 0x43 358 #define AR5K_SREV_PHY_2413 0x45 359 #define AR5K_SREV_PHY_5413 0x61 360 #define AR5K_SREV_PHY_2425 0x70 361 362 /* TODO add support to mac80211 for vendor-specific rates and modes */ 363 364 /** 365 * DOC: Atheros XR 366 * 367 * Some of this information is based on Documentation from: 368 * 369 * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG 370 * 371 * Atheros' eXtended Range - range enhancing extension is a modulation scheme 372 * that is supposed to double the link distance between an Atheros XR-enabled 373 * client device with an Atheros XR-enabled access point. This is achieved 374 * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB 375 * above what the 802.11 specifications demand. In addition, new (proprietary) 376 * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. 377 * 378 * Please note that can you either use XR or TURBO but you cannot use both, 379 * they are exclusive. 380 * 381 * Also note that we do not plan to support XR mode at least for now. You can 382 * get a mode similar to XR by using 5MHz bwmode. 383 */ 384 385 386 /** 387 * DOC: Atheros SuperAG 388 * 389 * In addition to XR we have another modulation scheme called TURBO mode 390 * that is supposed to provide a throughput transmission speed up to 40Mbit/s 391 * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two 392 * 54Mbit/s 802.11g channels. To use this feature both ends must support it. 393 * There is also a distinction between "static" and "dynamic" turbo modes: 394 * 395 * - Static: is the dumb version: devices set to this mode stick to it until 396 * the mode is turned off. 397 * 398 * - Dynamic: is the intelligent version, the network decides itself if it 399 * is ok to use turbo. As soon as traffic is detected on adjacent channels 400 * (which would get used in turbo mode), or when a non-turbo station joins 401 * the network, turbo mode won't be used until the situation changes again. 402 * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which 403 * monitors the used radio band in order to decide whether turbo mode may 404 * be used or not. 405 * 406 * This article claims Super G sticks to bonding of channels 5 and 6 for 407 * USA: 408 * 409 * http://www.pcworld.com/article/id,113428-page,1/article.html 410 * 411 * The channel bonding seems to be driver specific though. 412 * 413 * In addition to TURBO modes we also have the following features for even 414 * greater speed-up: 415 * 416 * - Bursting: allows multiple frames to be sent at once, rather than pausing 417 * after each frame. Bursting is a standards-compliant feature that can be 418 * used with any Access Point. 419 * 420 * - Fast frames: increases the amount of information that can be sent per 421 * frame, also resulting in a reduction of transmission overhead. It is a 422 * proprietary feature that needs to be supported by the Access Point. 423 * 424 * - Compression: data frames are compressed in real time using a Lempel Ziv 425 * algorithm. This is done transparently. Once this feature is enabled, 426 * compression and decompression takes place inside the chipset, without 427 * putting additional load on the host CPU. 428 * 429 * As with XR we also don't plan to support SuperAG features for now. You can 430 * get a mode similar to TURBO by using 40MHz bwmode. 431 */ 432 433 434 /** 435 * enum ath5k_driver_mode - PHY operation mode 436 * @AR5K_MODE_11A: 802.11a 437 * @AR5K_MODE_11B: 802.11b 438 * @AR5K_MODE_11G: 801.11g 439 * @AR5K_MODE_MAX: Used for boundary checks 440 * 441 * Do not change the order here, we use these as 442 * array indices and it also maps EEPROM structures. 443 */ 444 enum ath5k_driver_mode { 445 AR5K_MODE_11A = 0, 446 AR5K_MODE_11B = 1, 447 AR5K_MODE_11G = 2, 448 AR5K_MODE_MAX = 3 449 }; 450 451 /** 452 * enum ath5k_ant_mode - Antenna operation mode 453 * @AR5K_ANTMODE_DEFAULT: Default antenna setup 454 * @AR5K_ANTMODE_FIXED_A: Only antenna A is present 455 * @AR5K_ANTMODE_FIXED_B: Only antenna B is present 456 * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap 457 * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc 458 * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc 459 * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx- 460 * @AR5K_ANTMODE_MAX: Used for boundary checks 461 * 462 * For more infos on antenna control check out phy.c 463 */ 464 enum ath5k_ant_mode { 465 AR5K_ANTMODE_DEFAULT = 0, 466 AR5K_ANTMODE_FIXED_A = 1, 467 AR5K_ANTMODE_FIXED_B = 2, 468 AR5K_ANTMODE_SINGLE_AP = 3, 469 AR5K_ANTMODE_SECTOR_AP = 4, 470 AR5K_ANTMODE_SECTOR_STA = 5, 471 AR5K_ANTMODE_DEBUG = 6, 472 AR5K_ANTMODE_MAX, 473 }; 474 475 /** 476 * enum ath5k_bw_mode - Bandwidth operation mode 477 * @AR5K_BWMODE_DEFAULT: 20MHz, default operation 478 * @AR5K_BWMODE_5MHZ: Quarter rate 479 * @AR5K_BWMODE_10MHZ: Half rate 480 * @AR5K_BWMODE_40MHZ: Turbo 481 */ 482 enum ath5k_bw_mode { 483 AR5K_BWMODE_DEFAULT = 0, 484 AR5K_BWMODE_5MHZ = 1, 485 AR5K_BWMODE_10MHZ = 2, 486 AR5K_BWMODE_40MHZ = 3 487 }; 488 489 490 491 /****************\ 492 TX DEFINITIONS 493 \****************/ 494 495 /** 496 * struct ath5k_tx_status - TX Status descriptor 497 * @ts_seqnum: Sequence number 498 * @ts_tstamp: Timestamp 499 * @ts_status: Status code 500 * @ts_final_idx: Final transmission series index 501 * @ts_final_retry: Final retry count 502 * @ts_rssi: RSSI for received ACK 503 * @ts_shortretry: Short retry count 504 * @ts_virtcol: Virtual collision count 505 * @ts_antenna: Antenna used 506 * 507 * TX status descriptor gets filled by the hw 508 * on each transmission attempt. 509 */ 510 struct ath5k_tx_status { 511 u16 ts_seqnum; 512 u16 ts_tstamp; 513 u8 ts_status; 514 u8 ts_final_idx; 515 u8 ts_final_retry; 516 s8 ts_rssi; 517 u8 ts_shortretry; 518 u8 ts_virtcol; 519 u8 ts_antenna; 520 }; 521 522 #define AR5K_TXSTAT_ALTRATE 0x80 523 #define AR5K_TXERR_XRETRY 0x01 524 #define AR5K_TXERR_FILT 0x02 525 #define AR5K_TXERR_FIFO 0x04 526 527 /** 528 * enum ath5k_tx_queue - Queue types used to classify tx queues. 529 * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue 530 * @AR5K_TX_QUEUE_DATA: A normal data queue 531 * @AR5K_TX_QUEUE_BEACON: The beacon queue 532 * @AR5K_TX_QUEUE_CAB: The after-beacon queue 533 * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue 534 */ 535 enum ath5k_tx_queue { 536 AR5K_TX_QUEUE_INACTIVE = 0, 537 AR5K_TX_QUEUE_DATA, 538 AR5K_TX_QUEUE_BEACON, 539 AR5K_TX_QUEUE_CAB, 540 AR5K_TX_QUEUE_UAPSD, 541 }; 542 543 #define AR5K_NUM_TX_QUEUES 10 544 #define AR5K_NUM_TX_QUEUES_NOQCU 2 545 546 /** 547 * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues 548 * @AR5K_WME_AC_BK: Background traffic 549 * @AR5K_WME_AC_BE: Best-effort (normal) traffic 550 * @AR5K_WME_AC_VI: Video traffic 551 * @AR5K_WME_AC_VO: Voice traffic 552 * 553 * These are the 4 Access Categories as defined in 554 * WME spec. 0 is the lowest priority and 4 is the 555 * highest. Normal data that hasn't been classified 556 * goes to the Best Effort AC. 557 */ 558 enum ath5k_tx_queue_subtype { 559 AR5K_WME_AC_BK = 0, 560 AR5K_WME_AC_BE, 561 AR5K_WME_AC_VI, 562 AR5K_WME_AC_VO, 563 }; 564 565 /** 566 * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions 567 * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available) 568 * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available) 569 * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index 570 * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index 571 * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue 572 * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue 573 * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery, 574 * 575 * Each number represents a hw queue. If hw does not support hw queues 576 * (eg 5210) all data goes in one queue. 577 */ 578 enum ath5k_tx_queue_id { 579 AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, 580 AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, 581 AR5K_TX_QUEUE_ID_DATA_MIN = 0, 582 AR5K_TX_QUEUE_ID_DATA_MAX = 3, 583 AR5K_TX_QUEUE_ID_UAPSD = 7, 584 AR5K_TX_QUEUE_ID_CAB = 8, 585 AR5K_TX_QUEUE_ID_BEACON = 9, 586 }; 587 588 /* 589 * Flags to set hw queue's parameters... 590 */ 591 #define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ 592 #define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ 593 #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ 594 #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ 595 #define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ 596 #define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ 597 #define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ 598 #define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ 599 #define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ 600 #define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ 601 #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ 602 #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ 603 #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ 604 #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ 605 606 /** 607 * struct ath5k_txq - Transmit queue state 608 * @qnum: Hardware q number 609 * @link: Link ptr in last TX desc 610 * @q: Transmit queue (&struct list_head) 611 * @lock: Lock on q and link 612 * @setup: Is the queue configured 613 * @txq_len:Number of queued buffers 614 * @txq_max: Max allowed num of queued buffers 615 * @txq_poll_mark: Used to check if queue got stuck 616 * @txq_stuck: Queue stuck counter 617 * 618 * One of these exists for each hardware transmit queue. 619 * Packets sent to us from above are assigned to queues based 620 * on their priority. Not all devices support a complete set 621 * of hardware transmit queues. For those devices the array 622 * sc_ac2q will map multiple priorities to fewer hardware queues 623 * (typically all to one hardware queue). 624 */ 625 struct ath5k_txq { 626 unsigned int qnum; 627 u32 *link; 628 struct list_head q; 629 spinlock_t lock; 630 bool setup; 631 int txq_len; 632 int txq_max; 633 bool txq_poll_mark; 634 unsigned int txq_stuck; 635 }; 636 637 /** 638 * struct ath5k_txq_info - A struct to hold TX queue's parameters 639 * @tqi_type: One of enum ath5k_tx_queue 640 * @tqi_subtype: One of enum ath5k_tx_queue_subtype 641 * @tqi_flags: TX queue flags (see above) 642 * @tqi_aifs: Arbitrated Inter-frame Space 643 * @tqi_cw_min: Minimum Contention Window 644 * @tqi_cw_max: Maximum Contention Window 645 * @tqi_cbr_period: Constant bit rate period 646 * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled 647 */ 648 struct ath5k_txq_info { 649 enum ath5k_tx_queue tqi_type; 650 enum ath5k_tx_queue_subtype tqi_subtype; 651 u16 tqi_flags; 652 u8 tqi_aifs; 653 u16 tqi_cw_min; 654 u16 tqi_cw_max; 655 u32 tqi_cbr_period; 656 u32 tqi_cbr_overflow_limit; 657 u32 tqi_burst_time; 658 u32 tqi_ready_time; 659 }; 660 661 /** 662 * enum ath5k_pkt_type - Transmit packet types 663 * @AR5K_PKT_TYPE_NORMAL: Normal data 664 * @AR5K_PKT_TYPE_ATIM: ATIM 665 * @AR5K_PKT_TYPE_PSPOLL: PS-Poll 666 * @AR5K_PKT_TYPE_BEACON: Beacon 667 * @AR5K_PKT_TYPE_PROBE_RESP: Probe response 668 * @AR5K_PKT_TYPE_PIFS: PIFS 669 * Used on tx control descriptor 670 */ 671 enum ath5k_pkt_type { 672 AR5K_PKT_TYPE_NORMAL = 0, 673 AR5K_PKT_TYPE_ATIM = 1, 674 AR5K_PKT_TYPE_PSPOLL = 2, 675 AR5K_PKT_TYPE_BEACON = 3, 676 AR5K_PKT_TYPE_PROBE_RESP = 4, 677 AR5K_PKT_TYPE_PIFS = 5, 678 }; 679 680 /* 681 * TX power and TPC settings 682 */ 683 #define AR5K_TXPOWER_OFDM(_r, _v) ( \ 684 ((0 & 1) << ((_v) + 6)) | \ 685 (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ 686 ) 687 688 #define AR5K_TXPOWER_CCK(_r, _v) ( \ 689 (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ 690 ) 691 692 693 694 /****************\ 695 RX DEFINITIONS 696 \****************/ 697 698 /** 699 * struct ath5k_rx_status - RX Status descriptor 700 * @rs_datalen: Data length 701 * @rs_tstamp: Timestamp 702 * @rs_status: Status code 703 * @rs_phyerr: PHY error mask 704 * @rs_rssi: RSSI in 0.5dbm units 705 * @rs_keyix: Index to the key used for decrypting 706 * @rs_rate: Rate used to decode the frame 707 * @rs_antenna: Antenna used to receive the frame 708 * @rs_more: Indicates this is a frame fragment (Fast frames) 709 */ 710 struct ath5k_rx_status { 711 u16 rs_datalen; 712 u16 rs_tstamp; 713 u8 rs_status; 714 u8 rs_phyerr; 715 s8 rs_rssi; 716 u8 rs_keyix; 717 u8 rs_rate; 718 u8 rs_antenna; 719 u8 rs_more; 720 }; 721 722 #define AR5K_RXERR_CRC 0x01 723 #define AR5K_RXERR_PHY 0x02 724 #define AR5K_RXERR_FIFO 0x04 725 #define AR5K_RXERR_DECRYPT 0x08 726 #define AR5K_RXERR_MIC 0x10 727 #define AR5K_RXKEYIX_INVALID ((u8) -1) 728 #define AR5K_TXKEYIX_INVALID ((u32) -1) 729 730 731 /**************************\ 732 BEACON TIMERS DEFINITIONS 733 \**************************/ 734 735 #define AR5K_BEACON_PERIOD 0x0000ffff 736 #define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ 737 #define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ 738 739 740 /* 741 * TSF to TU conversion: 742 * 743 * TSF is a 64bit value in usec (microseconds). 744 * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of 745 * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). 746 */ 747 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) 748 749 750 751 /*******************************\ 752 GAIN OPTIMIZATION DEFINITIONS 753 \*******************************/ 754 755 /** 756 * enum ath5k_rfgain - RF Gain optimization engine state 757 * @AR5K_RFGAIN_INACTIVE: Engine disabled 758 * @AR5K_RFGAIN_ACTIVE: Probe active 759 * @AR5K_RFGAIN_READ_REQUESTED: Probe requested 760 * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change 761 */ 762 enum ath5k_rfgain { 763 AR5K_RFGAIN_INACTIVE = 0, 764 AR5K_RFGAIN_ACTIVE, 765 AR5K_RFGAIN_READ_REQUESTED, 766 AR5K_RFGAIN_NEED_CHANGE, 767 }; 768 769 /** 770 * struct ath5k_gain - RF Gain optimization engine state data 771 * @g_step_idx: Current step index 772 * @g_current: Current gain 773 * @g_target: Target gain 774 * @g_low: Low gain boundary 775 * @g_high: High gain boundary 776 * @g_f_corr: Gain_F correction 777 * @g_state: One of enum ath5k_rfgain 778 */ 779 struct ath5k_gain { 780 u8 g_step_idx; 781 u8 g_current; 782 u8 g_target; 783 u8 g_low; 784 u8 g_high; 785 u8 g_f_corr; 786 u8 g_state; 787 }; 788 789 790 791 /********************\ 792 COMMON DEFINITIONS 793 \********************/ 794 795 #define AR5K_SLOT_TIME_9 396 796 #define AR5K_SLOT_TIME_20 880 797 #define AR5K_SLOT_TIME_MAX 0xffff 798 799 /** 800 * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111 801 * @a2_flags: Channel flags (internal) 802 * @a2_athchan: HW channel number (internal) 803 * 804 * This structure is used to map 2GHz channels to 805 * 5GHz Atheros channels on 2111 frequency converter 806 * that comes together with RF5111 807 * TODO: Clean up 808 */ 809 struct ath5k_athchan_2ghz { 810 u32 a2_flags; 811 u16 a2_athchan; 812 }; 813 814 /** 815 * enum ath5k_dmasize - DMA size definitions (2^(n+2)) 816 * @AR5K_DMASIZE_4B: 4Bytes 817 * @AR5K_DMASIZE_8B: 8Bytes 818 * @AR5K_DMASIZE_16B: 16Bytes 819 * @AR5K_DMASIZE_32B: 32Bytes 820 * @AR5K_DMASIZE_64B: 64Bytes (Default) 821 * @AR5K_DMASIZE_128B: 128Bytes 822 * @AR5K_DMASIZE_256B: 256Bytes 823 * @AR5K_DMASIZE_512B: 512Bytes 824 * 825 * These are used to set DMA burst size on hw 826 * 827 * Note: Some platforms can't handle more than 4Bytes 828 * be careful on embedded boards. 829 */ 830 enum ath5k_dmasize { 831 AR5K_DMASIZE_4B = 0, 832 AR5K_DMASIZE_8B, 833 AR5K_DMASIZE_16B, 834 AR5K_DMASIZE_32B, 835 AR5K_DMASIZE_64B, 836 AR5K_DMASIZE_128B, 837 AR5K_DMASIZE_256B, 838 AR5K_DMASIZE_512B 839 }; 840 841 842 843 /******************\ 844 RATE DEFINITIONS 845 \******************/ 846 847 /** 848 * DOC: Rate codes 849 * 850 * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. 851 * 852 * The rate code is used to get the RX rate or set the TX rate on the 853 * hardware descriptors. It is also used for internal modulation control 854 * and settings. 855 * 856 * This is the hardware rate map we are aware of (html unfriendly): 857 * 858 * Rate code Rate (Kbps) 859 * --------- ----------- 860 * 0x01 3000 (XR) 861 * 0x02 1000 (XR) 862 * 0x03 250 (XR) 863 * 0x04 - 05 -Reserved- 864 * 0x06 2000 (XR) 865 * 0x07 500 (XR) 866 * 0x08 48000 (OFDM) 867 * 0x09 24000 (OFDM) 868 * 0x0A 12000 (OFDM) 869 * 0x0B 6000 (OFDM) 870 * 0x0C 54000 (OFDM) 871 * 0x0D 36000 (OFDM) 872 * 0x0E 18000 (OFDM) 873 * 0x0F 9000 (OFDM) 874 * 0x10 - 17 -Reserved- 875 * 0x18 11000L (CCK) 876 * 0x19 5500L (CCK) 877 * 0x1A 2000L (CCK) 878 * 0x1B 1000L (CCK) 879 * 0x1C 11000S (CCK) 880 * 0x1D 5500S (CCK) 881 * 0x1E 2000S (CCK) 882 * 0x1F -Reserved- 883 * 884 * "S" indicates CCK rates with short preamble and "L" with long preamble. 885 * 886 * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the 887 * lowest 4 bits, so they are the same as above with a 0xF mask. 888 * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). 889 * We handle this in ath5k_setup_bands(). 890 */ 891 #define AR5K_MAX_RATES 32 892 893 /* B */ 894 #define ATH5K_RATE_CODE_1M 0x1B 895 #define ATH5K_RATE_CODE_2M 0x1A 896 #define ATH5K_RATE_CODE_5_5M 0x19 897 #define ATH5K_RATE_CODE_11M 0x18 898 /* A and G */ 899 #define ATH5K_RATE_CODE_6M 0x0B 900 #define ATH5K_RATE_CODE_9M 0x0F 901 #define ATH5K_RATE_CODE_12M 0x0A 902 #define ATH5K_RATE_CODE_18M 0x0E 903 #define ATH5K_RATE_CODE_24M 0x09 904 #define ATH5K_RATE_CODE_36M 0x0D 905 #define ATH5K_RATE_CODE_48M 0x08 906 #define ATH5K_RATE_CODE_54M 0x0C 907 908 /* Adding this flag to rate_code on B rates 909 * enables short preamble */ 910 #define AR5K_SET_SHORT_PREAMBLE 0x04 911 912 /* 913 * Crypto definitions 914 */ 915 916 #define AR5K_KEYCACHE_SIZE 8 917 extern bool ath5k_modparam_nohwcrypt; 918 919 /***********************\ 920 HW RELATED DEFINITIONS 921 \***********************/ 922 923 /* 924 * Misc definitions 925 */ 926 #define AR5K_RSSI_EP_MULTIPLIER (1 << 7) 927 928 #define AR5K_ASSERT_ENTRY(_e, _s) do { \ 929 if (_e >= _s) \ 930 return false; \ 931 } while (0) 932 933 /* 934 * Hardware interrupt abstraction 935 */ 936 937 /** 938 * enum ath5k_int - Hardware interrupt masks helpers 939 * @AR5K_INT_RXOK: Frame successfully received 940 * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor 941 * @AR5K_INT_RXERR: Frame reception failed 942 * @AR5K_INT_RXNOFRM: No frame received within a specified time period 943 * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors 944 * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is 945 * not always fatal, on some chips we can continue operation 946 * without resetting the card, that's why %AR5K_INT_FATAL is not 947 * common for all chips. 948 * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts 949 * 950 * @AR5K_INT_TXOK: Frame transmission success 951 * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor 952 * @AR5K_INT_TXERR: Frame transmission failure 953 * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The 954 * Queue Control Unit (QCU) signals an EOL interrupt only if a 955 * descriptor's LinkPtr is NULL. For more details, refer to: 956 * "http://www.freepatentsonline.com/20030225739.html" 957 * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period 958 * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should 959 * increase the TX trigger threshold. 960 * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts 961 * 962 * @AR5K_INT_MIB: Indicates the either Management Information Base counters or 963 * one of the PHY error counters reached the maximum value and 964 * should be read and cleared. 965 * @AR5K_INT_SWI: Software triggered interrupt. 966 * @AR5K_INT_RXPHY: RX PHY Error 967 * @AR5K_INT_RXKCM: RX Key cache miss 968 * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a 969 * beacon that must be handled in software. The alternative is if 970 * you have VEOL support, in that case you let the hardware deal 971 * with things. 972 * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold 973 * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing 974 * beacons from the AP have associated with, we should probably 975 * try to reassociate. When in IBSS mode this might mean we have 976 * not received any beacons from any local stations. Note that 977 * every station in an IBSS schedules to send beacons at the 978 * Target Beacon Transmission Time (TBTT) with a random backoff. 979 * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty. 980 * @AR5K_INT_TIM: Beacon with local station's TIM bit set 981 * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received 982 * @AR5K_INT_DTIM_SYNC: DTIM sync lost 983 * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to 984 * our GPIO pins. 985 * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting 986 * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got 987 * nothing or an incomplete CAB frame sequence. 988 * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired 989 * @AR5K_INT_QCBRURN: A queue got triggered wile empty 990 * @AR5K_INT_QTRIG: A queue got triggered 991 * 992 * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA 993 * errors. Indicates we need to reset the card. 994 * @AR5K_INT_GLOBAL: Used to clear and set the IER 995 * @AR5K_INT_NOCARD: Signals the card has been removed 996 * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same 997 * bit value 998 * 999 * These are mapped to take advantage of some common bits 1000 * between the MACs, to be able to set intr properties 1001 * easier. Some of them are not used yet inside hw.c. Most map 1002 * to the respective hw interrupt value as they are common among different 1003 * MACs. 1004 */ 1005 enum ath5k_int { 1006 AR5K_INT_RXOK = 0x00000001, 1007 AR5K_INT_RXDESC = 0x00000002, 1008 AR5K_INT_RXERR = 0x00000004, 1009 AR5K_INT_RXNOFRM = 0x00000008, 1010 AR5K_INT_RXEOL = 0x00000010, 1011 AR5K_INT_RXORN = 0x00000020, 1012 AR5K_INT_TXOK = 0x00000040, 1013 AR5K_INT_TXDESC = 0x00000080, 1014 AR5K_INT_TXERR = 0x00000100, 1015 AR5K_INT_TXNOFRM = 0x00000200, 1016 AR5K_INT_TXEOL = 0x00000400, 1017 AR5K_INT_TXURN = 0x00000800, 1018 AR5K_INT_MIB = 0x00001000, 1019 AR5K_INT_SWI = 0x00002000, 1020 AR5K_INT_RXPHY = 0x00004000, 1021 AR5K_INT_RXKCM = 0x00008000, 1022 AR5K_INT_SWBA = 0x00010000, 1023 AR5K_INT_BRSSI = 0x00020000, 1024 AR5K_INT_BMISS = 0x00040000, 1025 AR5K_INT_FATAL = 0x00080000, /* Non common */ 1026 AR5K_INT_BNR = 0x00100000, /* Non common */ 1027 AR5K_INT_TIM = 0x00200000, /* Non common */ 1028 AR5K_INT_DTIM = 0x00400000, /* Non common */ 1029 AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ 1030 AR5K_INT_GPIO = 0x01000000, 1031 AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ 1032 AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ 1033 AR5K_INT_QCBRORN = 0x08000000, /* Non common */ 1034 AR5K_INT_QCBRURN = 0x10000000, /* Non common */ 1035 AR5K_INT_QTRIG = 0x20000000, /* Non common */ 1036 AR5K_INT_GLOBAL = 0x80000000, 1037 1038 AR5K_INT_TX_ALL = AR5K_INT_TXOK 1039 | AR5K_INT_TXDESC 1040 | AR5K_INT_TXERR 1041 | AR5K_INT_TXNOFRM 1042 | AR5K_INT_TXEOL 1043 | AR5K_INT_TXURN, 1044 1045 AR5K_INT_RX_ALL = AR5K_INT_RXOK 1046 | AR5K_INT_RXDESC 1047 | AR5K_INT_RXERR 1048 | AR5K_INT_RXNOFRM 1049 | AR5K_INT_RXEOL 1050 | AR5K_INT_RXORN, 1051 1052 AR5K_INT_COMMON = AR5K_INT_RXOK 1053 | AR5K_INT_RXDESC 1054 | AR5K_INT_RXERR 1055 | AR5K_INT_RXNOFRM 1056 | AR5K_INT_RXEOL 1057 | AR5K_INT_RXORN 1058 | AR5K_INT_TXOK 1059 | AR5K_INT_TXDESC 1060 | AR5K_INT_TXERR 1061 | AR5K_INT_TXNOFRM 1062 | AR5K_INT_TXEOL 1063 | AR5K_INT_TXURN 1064 | AR5K_INT_MIB 1065 | AR5K_INT_SWI 1066 | AR5K_INT_RXPHY 1067 | AR5K_INT_RXKCM 1068 | AR5K_INT_SWBA 1069 | AR5K_INT_BRSSI 1070 | AR5K_INT_BMISS 1071 | AR5K_INT_GPIO 1072 | AR5K_INT_GLOBAL, 1073 1074 AR5K_INT_NOCARD = 0xffffffff 1075 }; 1076 1077 /** 1078 * enum ath5k_calibration_mask - Mask which calibration is active at the moment 1079 * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT) 1080 * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q) 1081 * @AR5K_CALIBRATION_NF: Noise Floor calibration 1082 * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity 1083 */ 1084 enum ath5k_calibration_mask { 1085 AR5K_CALIBRATION_FULL = 0x01, 1086 AR5K_CALIBRATION_SHORT = 0x02, 1087 AR5K_CALIBRATION_NF = 0x04, 1088 AR5K_CALIBRATION_ANI = 0x08, 1089 }; 1090 1091 /** 1092 * enum ath5k_power_mode - Power management modes 1093 * @AR5K_PM_UNDEFINED: Undefined 1094 * @AR5K_PM_AUTO: Allow card to sleep if possible 1095 * @AR5K_PM_AWAKE: Force card to wake up 1096 * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS) 1097 * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration 1098 * 1099 * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO 1100 * are also known to have problems on some cards. This is not a big 1101 * problem though because we can have almost the same effect as 1102 * FULL_SLEEP by putting card on warm reset (it's almost powered down). 1103 */ 1104 enum ath5k_power_mode { 1105 AR5K_PM_UNDEFINED = 0, 1106 AR5K_PM_AUTO, 1107 AR5K_PM_AWAKE, 1108 AR5K_PM_FULL_SLEEP, 1109 AR5K_PM_NETWORK_SLEEP, 1110 }; 1111 1112 /* 1113 * These match net80211 definitions (not used in 1114 * mac80211). 1115 * TODO: Clean this up 1116 */ 1117 #define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ 1118 #define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ 1119 #define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ 1120 #define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ 1121 #define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ 1122 1123 /* GPIO-controlled software LED */ 1124 #define AR5K_SOFTLED_PIN 0 1125 #define AR5K_SOFTLED_ON 0 1126 #define AR5K_SOFTLED_OFF 1 1127 1128 1129 /* XXX: we *may* move cap_range stuff to struct wiphy */ 1130 struct ath5k_capabilities { 1131 /* 1132 * Supported PHY modes 1133 * (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...) 1134 */ 1135 DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); 1136 1137 /* 1138 * Frequency range (without regulation restrictions) 1139 */ 1140 struct { 1141 u16 range_2ghz_min; 1142 u16 range_2ghz_max; 1143 u16 range_5ghz_min; 1144 u16 range_5ghz_max; 1145 } cap_range; 1146 1147 /* 1148 * Values stored in the EEPROM (some of them...) 1149 */ 1150 struct ath5k_eeprom_info cap_eeprom; 1151 1152 /* 1153 * Queue information 1154 */ 1155 struct { 1156 u8 q_tx_num; 1157 } cap_queues; 1158 1159 bool cap_has_phyerr_counters; 1160 bool cap_has_mrr_support; 1161 bool cap_needs_2GHz_ovr; 1162 }; 1163 1164 /* size of noise floor history (keep it a power of two) */ 1165 #define ATH5K_NF_CAL_HIST_MAX 8 1166 struct ath5k_nfcal_hist { 1167 s16 index; /* current index into nfval */ 1168 s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ 1169 }; 1170 1171 #define ATH5K_LED_MAX_NAME_LEN 31 1172 1173 /* 1174 * State for LED triggers 1175 */ 1176 struct ath5k_led { 1177 char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ 1178 struct ath5k_hw *ah; /* driver state */ 1179 struct led_classdev led_dev; /* led classdev */ 1180 }; 1181 1182 /* Rfkill */ 1183 struct ath5k_rfkill { 1184 /* GPIO PIN for rfkill */ 1185 u16 gpio; 1186 /* polarity of rfkill GPIO PIN */ 1187 bool polarity; 1188 /* RFKILL toggle tasklet */ 1189 struct tasklet_struct toggleq; 1190 }; 1191 1192 /* statistics */ 1193 struct ath5k_statistics { 1194 /* antenna use */ 1195 unsigned int antenna_rx[5]; /* frames count per antenna RX */ 1196 unsigned int antenna_tx[5]; /* frames count per antenna TX */ 1197 1198 /* frame errors */ 1199 unsigned int rx_all_count; /* all RX frames, including errors */ 1200 unsigned int tx_all_count; /* all TX frames, including errors */ 1201 unsigned int rx_bytes_count; /* all RX bytes, including errored pkts 1202 * and the MAC headers for each packet 1203 */ 1204 unsigned int tx_bytes_count; /* all TX bytes, including errored pkts 1205 * and the MAC headers and padding for 1206 * each packet. 1207 */ 1208 unsigned int rxerr_crc; 1209 unsigned int rxerr_phy; 1210 unsigned int rxerr_phy_code[32]; 1211 unsigned int rxerr_fifo; 1212 unsigned int rxerr_decrypt; 1213 unsigned int rxerr_mic; 1214 unsigned int rxerr_proc; 1215 unsigned int rxerr_jumbo; 1216 unsigned int txerr_retry; 1217 unsigned int txerr_fifo; 1218 unsigned int txerr_filt; 1219 1220 /* MIB counters */ 1221 unsigned int ack_fail; 1222 unsigned int rts_fail; 1223 unsigned int rts_ok; 1224 unsigned int fcs_error; 1225 unsigned int beacons; 1226 1227 unsigned int mib_intr; 1228 unsigned int rxorn_intr; 1229 unsigned int rxeol_intr; 1230 }; 1231 1232 /* 1233 * Misc defines 1234 */ 1235 1236 #define AR5K_MAX_GPIO 10 1237 #define AR5K_MAX_RF_BANKS 8 1238 1239 #if CHAN_DEBUG 1240 #define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200) 1241 #else 1242 #define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20) 1243 #endif 1244 1245 #define ATH_RXBUF 40 /* number of RX buffers */ 1246 #define ATH_TXBUF 200 /* number of TX buffers */ 1247 #define ATH_BCBUF 4 /* number of beacon buffers */ 1248 #define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ 1249 #define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ 1250 1251 /* Driver state associated with an instance of a device */ 1252 struct ath5k_hw { 1253 struct ath_common common; 1254 1255 struct pci_dev *pdev; 1256 struct device *dev; /* for dma mapping */ 1257 int irq; 1258 u16 devid; 1259 void __iomem *iobase; /* address of the device */ 1260 struct mutex lock; /* dev-level lock */ 1261 struct ieee80211_hw *hw; /* IEEE 802.11 common */ 1262 struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; 1263 struct ieee80211_channel channels[ATH_CHAN_MAX]; 1264 struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; 1265 s8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; 1266 enum nl80211_iftype opmode; 1267 1268 #ifdef CONFIG_ATH5K_DEBUG 1269 struct ath5k_dbg_info debug; /* debug info */ 1270 #endif /* CONFIG_ATH5K_DEBUG */ 1271 1272 struct ath5k_buf *bufptr; /* allocated buffer ptr */ 1273 struct ath5k_desc *desc; /* TX/RX descriptors */ 1274 dma_addr_t desc_daddr; /* DMA (physical) address */ 1275 size_t desc_len; /* size of TX/RX descriptors */ 1276 1277 DECLARE_BITMAP(status, 4); 1278 #define ATH_STAT_INVALID 0 /* disable hardware accesses */ 1279 #define ATH_STAT_PROMISC 1 1280 #define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ 1281 #define ATH_STAT_STARTED 3 /* opened & irqs enabled */ 1282 1283 unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ 1284 struct ieee80211_channel *curchan; /* current h/w channel */ 1285 1286 u16 nvifs; 1287 1288 enum ath5k_int imask; /* interrupt mask copy */ 1289 1290 spinlock_t irqlock; 1291 bool rx_pending; /* rx tasklet pending */ 1292 bool tx_pending; /* tx tasklet pending */ 1293 1294 u8 bssidmask[ETH_ALEN]; 1295 1296 unsigned int led_pin, /* GPIO pin for driving LED */ 1297 led_on; /* pin setting for LED on */ 1298 1299 struct work_struct reset_work; /* deferred chip reset */ 1300 struct work_struct calib_work; /* deferred phy calibration */ 1301 1302 struct list_head rxbuf; /* receive buffer */ 1303 spinlock_t rxbuflock; 1304 u32 *rxlink; /* link ptr in last RX desc */ 1305 struct tasklet_struct rxtq; /* rx intr tasklet */ 1306 struct ath5k_led rx_led; /* rx led */ 1307 1308 struct list_head txbuf; /* transmit buffer */ 1309 spinlock_t txbuflock; 1310 unsigned int txbuf_len; /* buf count in txbuf list */ 1311 struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ 1312 struct tasklet_struct txtq; /* tx intr tasklet */ 1313 struct ath5k_led tx_led; /* tx led */ 1314 1315 struct ath5k_rfkill rf_kill; 1316 1317 spinlock_t block; /* protects beacon */ 1318 struct tasklet_struct beacontq; /* beacon intr tasklet */ 1319 struct list_head bcbuf; /* beacon buffer */ 1320 struct ieee80211_vif *bslot[ATH_BCBUF]; 1321 u16 num_ap_vifs; 1322 u16 num_adhoc_vifs; 1323 u16 num_mesh_vifs; 1324 unsigned int bhalq, /* SW q for outgoing beacons */ 1325 bmisscount, /* missed beacon transmits */ 1326 bintval, /* beacon interval in TU */ 1327 bsent; 1328 unsigned int nexttbtt; /* next beacon time in TU */ 1329 struct ath5k_txq *cabq; /* content after beacon */ 1330 1331 int power_level; /* Requested tx power in dBm */ 1332 bool assoc; /* associate state */ 1333 bool enable_beacon; /* true if beacons are on */ 1334 1335 struct ath5k_statistics stats; 1336 1337 struct ath5k_ani_state ani_state; 1338 struct tasklet_struct ani_tasklet; /* ANI calibration */ 1339 1340 struct delayed_work tx_complete_work; 1341 1342 struct survey_info survey; /* collected survey info */ 1343 1344 enum ath5k_int ah_imr; 1345 1346 struct ieee80211_channel *ah_current_channel; 1347 bool ah_iq_cal_needed; 1348 bool ah_single_chip; 1349 1350 enum ath5k_version ah_version; 1351 enum ath5k_radio ah_radio; 1352 u32 ah_mac_srev; 1353 u16 ah_mac_version; 1354 u16 ah_phy_revision; 1355 u16 ah_radio_5ghz_revision; 1356 u16 ah_radio_2ghz_revision; 1357 1358 #define ah_modes ah_capabilities.cap_mode 1359 #define ah_ee_version ah_capabilities.cap_eeprom.ee_version 1360 1361 u8 ah_retry_long; 1362 u8 ah_retry_short; 1363 1364 u32 ah_use_32khz_clock; 1365 1366 u8 ah_coverage_class; 1367 bool ah_ack_bitrate_high; 1368 u8 ah_bwmode; 1369 bool ah_short_slot; 1370 1371 /* Antenna Control */ 1372 u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; 1373 u8 ah_ant_mode; 1374 u8 ah_tx_ant; 1375 u8 ah_def_ant; 1376 1377 struct ath5k_capabilities ah_capabilities; 1378 1379 struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; 1380 u32 ah_txq_status; 1381 u32 ah_txq_imr_txok; 1382 u32 ah_txq_imr_txerr; 1383 u32 ah_txq_imr_txurn; 1384 u32 ah_txq_imr_txdesc; 1385 u32 ah_txq_imr_txeol; 1386 u32 ah_txq_imr_cbrorn; 1387 u32 ah_txq_imr_cbrurn; 1388 u32 ah_txq_imr_qtrig; 1389 u32 ah_txq_imr_nofrm; 1390 1391 u32 ah_txq_isr_txok_all; 1392 u32 ah_txq_isr_txurn; 1393 u32 ah_txq_isr_qcborn; 1394 u32 ah_txq_isr_qcburn; 1395 u32 ah_txq_isr_qtrig; 1396 1397 u32 *ah_rf_banks; 1398 size_t ah_rf_banks_size; 1399 size_t ah_rf_regs_count; 1400 struct ath5k_gain ah_gain; 1401 u8 ah_offset[AR5K_MAX_RF_BANKS]; 1402 1403 1404 struct { 1405 /* Temporary tables used for interpolation */ 1406 u8 tmpL[AR5K_EEPROM_N_PD_GAINS] 1407 [AR5K_EEPROM_POWER_TABLE_SIZE]; 1408 u8 tmpR[AR5K_EEPROM_N_PD_GAINS] 1409 [AR5K_EEPROM_POWER_TABLE_SIZE]; 1410 u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; 1411 u16 txp_rates_power_table[AR5K_MAX_RATES]; 1412 u8 txp_min_idx; 1413 bool txp_tpc; 1414 /* Values in 0.25dB units */ 1415 s16 txp_min_pwr; 1416 s16 txp_max_pwr; 1417 s16 txp_cur_pwr; 1418 /* Values in 0.5dB units */ 1419 s16 txp_offset; 1420 s16 txp_ofdm; 1421 s16 txp_cck_ofdm_gainf_delta; 1422 /* Value in dB units */ 1423 s16 txp_cck_ofdm_pwr_delta; 1424 bool txp_setup; 1425 } ah_txpower; 1426 1427 struct ath5k_nfcal_hist ah_nfcal_hist; 1428 1429 /* average beacon RSSI in our BSS (used by ANI) */ 1430 struct ewma ah_beacon_rssi_avg; 1431 1432 /* noise floor from last periodic calibration */ 1433 s32 ah_noise_floor; 1434 1435 /* Calibration timestamp */ 1436 unsigned long ah_cal_next_full; 1437 unsigned long ah_cal_next_short; 1438 unsigned long ah_cal_next_ani; 1439 1440 /* Calibration mask */ 1441 u8 ah_cal_mask; 1442 1443 /* 1444 * Function pointers 1445 */ 1446 int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1447 unsigned int, unsigned int, int, enum ath5k_pkt_type, 1448 unsigned int, unsigned int, unsigned int, unsigned int, 1449 unsigned int, unsigned int, unsigned int, unsigned int); 1450 int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1451 struct ath5k_tx_status *); 1452 int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, 1453 struct ath5k_rx_status *); 1454 }; 1455 1456 struct ath_bus_ops { 1457 enum ath_bus_type ath_bus_type; 1458 void (*read_cachesize)(struct ath_common *common, int *csz); 1459 bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data); 1460 int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac); 1461 }; 1462 1463 /* 1464 * Prototypes 1465 */ 1466 extern const struct ieee80211_ops ath5k_hw_ops; 1467 1468 /* Initialization and detach functions */ 1469 int ath5k_hw_init(struct ath5k_hw *ah); 1470 void ath5k_hw_deinit(struct ath5k_hw *ah); 1471 1472 int ath5k_sysfs_register(struct ath5k_hw *ah); 1473 void ath5k_sysfs_unregister(struct ath5k_hw *ah); 1474 1475 /*Chip id helper functions */ 1476 int ath5k_hw_read_srev(struct ath5k_hw *ah); 1477 1478 /* LED functions */ 1479 int ath5k_init_leds(struct ath5k_hw *ah); 1480 void ath5k_led_enable(struct ath5k_hw *ah); 1481 void ath5k_led_off(struct ath5k_hw *ah); 1482 void ath5k_unregister_leds(struct ath5k_hw *ah); 1483 1484 1485 /* Reset Functions */ 1486 int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel); 1487 int ath5k_hw_on_hold(struct ath5k_hw *ah); 1488 int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, 1489 struct ieee80211_channel *channel, bool fast, bool skip_pcu); 1490 int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, 1491 bool is_set); 1492 /* Power management functions */ 1493 1494 1495 /* Clock rate related functions */ 1496 unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); 1497 unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); 1498 void ath5k_hw_set_clockrate(struct ath5k_hw *ah); 1499 1500 1501 /* DMA Related Functions */ 1502 void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); 1503 u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); 1504 int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); 1505 int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); 1506 int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue); 1507 u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); 1508 int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, 1509 u32 phys_addr); 1510 int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); 1511 /* Interrupt handling */ 1512 bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); 1513 int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); 1514 enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); 1515 void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); 1516 /* Init/Stop functions */ 1517 void ath5k_hw_dma_init(struct ath5k_hw *ah); 1518 int ath5k_hw_dma_stop(struct ath5k_hw *ah); 1519 1520 /* EEPROM access functions */ 1521 int ath5k_eeprom_init(struct ath5k_hw *ah); 1522 void ath5k_eeprom_detach(struct ath5k_hw *ah); 1523 1524 1525 /* Protocol Control Unit Functions */ 1526 /* Helpers */ 1527 int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, 1528 int len, struct ieee80211_rate *rate, bool shortpre); 1529 unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah); 1530 unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah); 1531 int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); 1532 void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); 1533 /* RX filter control*/ 1534 int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); 1535 void ath5k_hw_set_bssid(struct ath5k_hw *ah); 1536 void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); 1537 void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); 1538 u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); 1539 void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); 1540 /* Receive (DRU) start/stop functions */ 1541 void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); 1542 void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); 1543 /* Beacon control functions */ 1544 u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); 1545 void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); 1546 void ath5k_hw_reset_tsf(struct ath5k_hw *ah); 1547 void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, 1548 u32 interval); 1549 bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); 1550 /* Init function */ 1551 void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode); 1552 1553 /* Queue Control Unit, DFS Control Unit Functions */ 1554 int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, 1555 struct ath5k_txq_info *queue_info); 1556 int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, 1557 const struct ath5k_txq_info *queue_info); 1558 int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, 1559 enum ath5k_tx_queue queue_type, 1560 struct ath5k_txq_info *queue_info); 1561 void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, 1562 unsigned int queue); 1563 u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); 1564 void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); 1565 int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); 1566 int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time); 1567 /* Init function */ 1568 int ath5k_hw_init_queues(struct ath5k_hw *ah); 1569 1570 /* Hardware Descriptor Functions */ 1571 int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); 1572 int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, 1573 u32 size, unsigned int flags); 1574 int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, 1575 unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, 1576 u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); 1577 1578 1579 /* GPIO Functions */ 1580 void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); 1581 int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); 1582 int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); 1583 u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); 1584 int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); 1585 void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, 1586 u32 interrupt_level); 1587 1588 1589 /* RFkill Functions */ 1590 void ath5k_rfkill_hw_start(struct ath5k_hw *ah); 1591 void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); 1592 1593 1594 /* Misc functions TODO: Cleanup */ 1595 int ath5k_hw_set_capabilities(struct ath5k_hw *ah); 1596 int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); 1597 int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); 1598 1599 1600 /* Initial register settings functions */ 1601 int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); 1602 1603 1604 /* PHY functions */ 1605 /* Misc PHY functions */ 1606 u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band); 1607 int ath5k_hw_phy_disable(struct ath5k_hw *ah); 1608 /* Gain_F optimization */ 1609 enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); 1610 int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); 1611 /* PHY/RF channel functions */ 1612 bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel); 1613 /* PHY calibration */ 1614 void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); 1615 int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, 1616 struct ieee80211_channel *channel); 1617 void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); 1618 /* Spur mitigation */ 1619 bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, 1620 struct ieee80211_channel *channel); 1621 /* Antenna control */ 1622 void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); 1623 void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); 1624 /* TX power setup */ 1625 int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); 1626 /* Init function */ 1627 int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, 1628 u8 mode, bool fast); 1629 1630 /* 1631 * Functions used internally 1632 */ 1633 1634 static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) 1635 { 1636 return &ah->common; 1637 } 1638 1639 static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) 1640 { 1641 return &(ath5k_hw_common(ah)->regulatory); 1642 } 1643 1644 #ifdef CONFIG_ATHEROS_AR231X 1645 #define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000) 1646 1647 static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) 1648 { 1649 /* On AR2315 and AR2317 the PCI clock domain registers 1650 * are outside of the WMAC register space */ 1651 if (unlikely((reg >= 0x4000) && (reg < 0x5000) && 1652 (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) 1653 return AR5K_AR2315_PCI_BASE + reg; 1654 1655 return ah->iobase + reg; 1656 } 1657 1658 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) 1659 { 1660 return ioread32(ath5k_ahb_reg(ah, reg)); 1661 } 1662 1663 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) 1664 { 1665 iowrite32(val, ath5k_ahb_reg(ah, reg)); 1666 } 1667 1668 #else 1669 1670 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) 1671 { 1672 return ioread32(ah->iobase + reg); 1673 } 1674 1675 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) 1676 { 1677 iowrite32(val, ah->iobase + reg); 1678 } 1679 1680 #endif 1681 1682 static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah) 1683 { 1684 return ath5k_hw_common(ah)->bus_ops->ath_bus_type; 1685 } 1686 1687 static inline void ath5k_read_cachesize(struct ath_common *common, int *csz) 1688 { 1689 common->bus_ops->read_cachesize(common, csz); 1690 } 1691 1692 static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data) 1693 { 1694 struct ath_common *common = ath5k_hw_common(ah); 1695 return common->bus_ops->eeprom_read(common, off, data); 1696 } 1697 1698 static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) 1699 { 1700 u32 retval = 0, bit, i; 1701 1702 for (i = 0; i < bits; i++) { 1703 bit = (val >> i) & 1; 1704 retval = (retval << 1) | bit; 1705 } 1706 1707 return retval; 1708 } 1709 1710 #endif 1711