1 /* SPDX-License-Identifier: BSD-3-Clause-Clear */ 2 /* 3 * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. 4 */ 5 #ifndef ATH11K_RX_DESC_H 6 #define ATH11K_RX_DESC_H 7 8 enum rx_desc_rxpcu_filter { 9 RX_DESC_RXPCU_FILTER_PASS, 10 RX_DESC_RXPCU_FILTER_MONITOR_CLIENT, 11 RX_DESC_RXPCU_FILTER_MONITOR_OTHER, 12 }; 13 14 /* rxpcu_filter_pass 15 * This MPDU passed the normal frame filter programming of rxpcu. 16 * 17 * rxpcu_filter_monitor_client 18 * This MPDU did not pass the regular frame filter and would 19 * have been dropped, were it not for the frame fitting into the 20 * 'monitor_client' category. 21 * 22 * rxpcu_filter_monitor_other 23 * This MPDU did not pass the regular frame filter and also did 24 * not pass the rxpcu_monitor_client filter. It would have been 25 * dropped accept that it did pass the 'monitor_other' category. 26 */ 27 28 #define RX_DESC_INFO0_RXPCU_MPDU_FITLER GENMASK(1, 0) 29 #define RX_DESC_INFO0_SW_FRAME_GRP_ID GENMASK(8, 2) 30 31 enum rx_desc_sw_frame_grp_id { 32 RX_DESC_SW_FRAME_GRP_ID_NDP_FRAME, 33 RX_DESC_SW_FRAME_GRP_ID_MCAST_DATA, 34 RX_DESC_SW_FRAME_GRP_ID_UCAST_DATA, 35 RX_DESC_SW_FRAME_GRP_ID_NULL_DATA, 36 RX_DESC_SW_FRAME_GRP_ID_MGMT_0000, 37 RX_DESC_SW_FRAME_GRP_ID_MGMT_0001, 38 RX_DESC_SW_FRAME_GRP_ID_MGMT_0010, 39 RX_DESC_SW_FRAME_GRP_ID_MGMT_0011, 40 RX_DESC_SW_FRAME_GRP_ID_MGMT_0100, 41 RX_DESC_SW_FRAME_GRP_ID_MGMT_0101, 42 RX_DESC_SW_FRAME_GRP_ID_MGMT_0110, 43 RX_DESC_SW_FRAME_GRP_ID_MGMT_0111, 44 RX_DESC_SW_FRAME_GRP_ID_MGMT_1000, 45 RX_DESC_SW_FRAME_GRP_ID_MGMT_1001, 46 RX_DESC_SW_FRAME_GRP_ID_MGMT_1010, 47 RX_DESC_SW_FRAME_GRP_ID_MGMT_1011, 48 RX_DESC_SW_FRAME_GRP_ID_MGMT_1100, 49 RX_DESC_SW_FRAME_GRP_ID_MGMT_1101, 50 RX_DESC_SW_FRAME_GRP_ID_MGMT_1110, 51 RX_DESC_SW_FRAME_GRP_ID_MGMT_1111, 52 RX_DESC_SW_FRAME_GRP_ID_CTRL_0000, 53 RX_DESC_SW_FRAME_GRP_ID_CTRL_0001, 54 RX_DESC_SW_FRAME_GRP_ID_CTRL_0010, 55 RX_DESC_SW_FRAME_GRP_ID_CTRL_0011, 56 RX_DESC_SW_FRAME_GRP_ID_CTRL_0100, 57 RX_DESC_SW_FRAME_GRP_ID_CTRL_0101, 58 RX_DESC_SW_FRAME_GRP_ID_CTRL_0110, 59 RX_DESC_SW_FRAME_GRP_ID_CTRL_0111, 60 RX_DESC_SW_FRAME_GRP_ID_CTRL_1000, 61 RX_DESC_SW_FRAME_GRP_ID_CTRL_1001, 62 RX_DESC_SW_FRAME_GRP_ID_CTRL_1010, 63 RX_DESC_SW_FRAME_GRP_ID_CTRL_1011, 64 RX_DESC_SW_FRAME_GRP_ID_CTRL_1100, 65 RX_DESC_SW_FRAME_GRP_ID_CTRL_1101, 66 RX_DESC_SW_FRAME_GRP_ID_CTRL_1110, 67 RX_DESC_SW_FRAME_GRP_ID_CTRL_1111, 68 RX_DESC_SW_FRAME_GRP_ID_UNSUPPORTED, 69 RX_DESC_SW_FRAME_GRP_ID_PHY_ERR, 70 }; 71 72 enum rx_desc_decap_type { 73 RX_DESC_DECAP_TYPE_RAW, 74 RX_DESC_DECAP_TYPE_NATIVE_WIFI, 75 RX_DESC_DECAP_TYPE_ETHERNET2_DIX, 76 RX_DESC_DECAP_TYPE_8023, 77 }; 78 79 enum rx_desc_decrypt_status_code { 80 RX_DESC_DECRYPT_STATUS_CODE_OK, 81 RX_DESC_DECRYPT_STATUS_CODE_UNPROTECTED_FRAME, 82 RX_DESC_DECRYPT_STATUS_CODE_DATA_ERR, 83 RX_DESC_DECRYPT_STATUS_CODE_KEY_INVALID, 84 RX_DESC_DECRYPT_STATUS_CODE_PEER_ENTRY_INVALID, 85 RX_DESC_DECRYPT_STATUS_CODE_OTHER, 86 }; 87 88 #define RX_ATTENTION_INFO1_FIRST_MPDU BIT(0) 89 #define RX_ATTENTION_INFO1_RSVD_1A BIT(1) 90 #define RX_ATTENTION_INFO1_MCAST_BCAST BIT(2) 91 #define RX_ATTENTION_INFO1_AST_IDX_NOT_FOUND BIT(3) 92 #define RX_ATTENTION_INFO1_AST_IDX_TIMEDOUT BIT(4) 93 #define RX_ATTENTION_INFO1_POWER_MGMT BIT(5) 94 #define RX_ATTENTION_INFO1_NON_QOS BIT(6) 95 #define RX_ATTENTION_INFO1_NULL_DATA BIT(7) 96 #define RX_ATTENTION_INFO1_MGMT_TYPE BIT(8) 97 #define RX_ATTENTION_INFO1_CTRL_TYPE BIT(9) 98 #define RX_ATTENTION_INFO1_MORE_DATA BIT(10) 99 #define RX_ATTENTION_INFO1_EOSP BIT(11) 100 #define RX_ATTENTION_INFO1_A_MSDU_ERROR BIT(12) 101 #define RX_ATTENTION_INFO1_FRAGMENT BIT(13) 102 #define RX_ATTENTION_INFO1_ORDER BIT(14) 103 #define RX_ATTENTION_INFO1_CCE_MATCH BIT(15) 104 #define RX_ATTENTION_INFO1_OVERFLOW_ERR BIT(16) 105 #define RX_ATTENTION_INFO1_MSDU_LEN_ERR BIT(17) 106 #define RX_ATTENTION_INFO1_TCP_UDP_CKSUM_FAIL BIT(18) 107 #define RX_ATTENTION_INFO1_IP_CKSUM_FAIL BIT(19) 108 #define RX_ATTENTION_INFO1_SA_IDX_INVALID BIT(20) 109 #define RX_ATTENTION_INFO1_DA_IDX_INVALID BIT(21) 110 #define RX_ATTENTION_INFO1_RSVD_1B BIT(22) 111 #define RX_ATTENTION_INFO1_RX_IN_TX_DECRYPT_BYP BIT(23) 112 #define RX_ATTENTION_INFO1_ENCRYPT_REQUIRED BIT(24) 113 #define RX_ATTENTION_INFO1_DIRECTED BIT(25) 114 #define RX_ATTENTION_INFO1_BUFFER_FRAGMENT BIT(26) 115 #define RX_ATTENTION_INFO1_MPDU_LEN_ERR BIT(27) 116 #define RX_ATTENTION_INFO1_TKIP_MIC_ERR BIT(28) 117 #define RX_ATTENTION_INFO1_DECRYPT_ERR BIT(29) 118 #define RX_ATTENTION_INFO1_UNDECRYPT_FRAME_ERR BIT(30) 119 #define RX_ATTENTION_INFO1_FCS_ERR BIT(31) 120 121 #define RX_ATTENTION_INFO2_FLOW_IDX_TIMEOUT BIT(0) 122 #define RX_ATTENTION_INFO2_FLOW_IDX_INVALID BIT(1) 123 #define RX_ATTENTION_INFO2_WIFI_PARSER_ERR BIT(2) 124 #define RX_ATTENTION_INFO2_AMSDU_PARSER_ERR BIT(3) 125 #define RX_ATTENTION_INFO2_SA_IDX_TIMEOUT BIT(4) 126 #define RX_ATTENTION_INFO2_DA_IDX_TIMEOUT BIT(5) 127 #define RX_ATTENTION_INFO2_MSDU_LIMIT_ERR BIT(6) 128 #define RX_ATTENTION_INFO2_DA_IS_VALID BIT(7) 129 #define RX_ATTENTION_INFO2_DA_IS_MCBC BIT(8) 130 #define RX_ATTENTION_INFO2_SA_IS_VALID BIT(9) 131 #define RX_ATTENTION_INFO2_DCRYPT_STATUS_CODE GENMASK(12, 10) 132 #define RX_ATTENTION_INFO2_RX_BITMAP_NOT_UPDED BIT(13) 133 #define RX_ATTENTION_INFO2_MSDU_DONE BIT(31) 134 135 struct rx_attention { 136 __le16 info0; 137 __le16 phy_ppdu_id; 138 __le32 info1; 139 __le32 info2; 140 } __packed; 141 142 /* rx_attention 143 * 144 * rxpcu_mpdu_filter_in_category 145 * Field indicates what the reason was that this mpdu frame 146 * was allowed to come into the receive path by rxpcu. Values 147 * are defined in enum %RX_DESC_RXPCU_FILTER_*. 148 * 149 * sw_frame_group_id 150 * SW processes frames based on certain classifications. Values 151 * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. 152 * 153 * phy_ppdu_id 154 * A ppdu counter value that PHY increments for every PPDU 155 * received. The counter value wraps around. 156 * 157 * first_mpdu 158 * Indicates the first MSDU of the PPDU. If both first_mpdu 159 * and last_mpdu are set in the MSDU then this is a not an 160 * A-MPDU frame but a stand alone MPDU. Interior MPDU in an 161 * A-MPDU shall have both first_mpdu and last_mpdu bits set to 162 * 0. The PPDU start status will only be valid when this bit 163 * is set. 164 * 165 * mcast_bcast 166 * Multicast / broadcast indicator. Only set when the MAC 167 * address 1 bit 0 is set indicating mcast/bcast and the BSSID 168 * matches one of the 4 BSSID registers. Only set when 169 * first_msdu is set. 170 * 171 * ast_index_not_found 172 * Only valid when first_msdu is set. Indicates no AST matching 173 * entries within the max search count. 174 * 175 * ast_index_timeout 176 * Only valid when first_msdu is set. Indicates an unsuccessful 177 * search in the address search table due to timeout. 178 * 179 * power_mgmt 180 * Power management bit set in the 802.11 header. Only set 181 * when first_msdu is set. 182 * 183 * non_qos 184 * Set if packet is not a non-QoS data frame. Only set when 185 * first_msdu is set. 186 * 187 * null_data 188 * Set if frame type indicates either null data or QoS null 189 * data format. Only set when first_msdu is set. 190 * 191 * mgmt_type 192 * Set if packet is a management packet. Only set when 193 * first_msdu is set. 194 * 195 * ctrl_type 196 * Set if packet is a control packet. Only set when first_msdu 197 * is set. 198 * 199 * more_data 200 * Set if more bit in frame control is set. Only set when 201 * first_msdu is set. 202 * 203 * eosp 204 * Set if the EOSP (end of service period) bit in the QoS 205 * control field is set. Only set when first_msdu is set. 206 * 207 * a_msdu_error 208 * Set if number of MSDUs in A-MSDU is above a threshold or if the 209 * size of the MSDU is invalid. This receive buffer will contain 210 * all of the remainder of MSDUs in this MPDU w/o decapsulation. 211 * 212 * fragment 213 * Indicates that this is an 802.11 fragment frame. This is 214 * set when either the more_frag bit is set in the frame 215 * control or the fragment number is not zero. Only set when 216 * first_msdu is set. 217 * 218 * order 219 * Set if the order bit in the frame control is set. Only set 220 * when first_msdu is set. 221 * 222 * cce_match 223 * Indicates that this status has a corresponding MSDU that 224 * requires FW processing. The OLE will have classification 225 * ring mask registers which will indicate the ring(s) for 226 * packets and descriptors which need FW attention. 227 * 228 * overflow_err 229 * PCU Receive FIFO does not have enough space to store the 230 * full receive packet. Enough space is reserved in the 231 * receive FIFO for the status is written. This MPDU remaining 232 * packets in the PPDU will be filtered and no Ack response 233 * will be transmitted. 234 * 235 * msdu_length_err 236 * Indicates that the MSDU length from the 802.3 encapsulated 237 * length field extends beyond the MPDU boundary. 238 * 239 * tcp_udp_chksum_fail 240 * Indicates that the computed checksum (tcp_udp_chksum) did 241 * not match the checksum in the TCP/UDP header. 242 * 243 * ip_chksum_fail 244 * Indicates that the computed checksum did not match the 245 * checksum in the IP header. 246 * 247 * sa_idx_invalid 248 * Indicates no matching entry was found in the address search 249 * table for the source MAC address. 250 * 251 * da_idx_invalid 252 * Indicates no matching entry was found in the address search 253 * table for the destination MAC address. 254 * 255 * rx_in_tx_decrypt_byp 256 * Indicates that RX packet is not decrypted as Crypto is busy 257 * with TX packet processing. 258 * 259 * encrypt_required 260 * Indicates that this data type frame is not encrypted even if 261 * the policy for this MPDU requires encryption as indicated in 262 * the peer table key type. 263 * 264 * directed 265 * MPDU is a directed packet which means that the RA matched 266 * our STA addresses. In proxySTA it means that the TA matched 267 * an entry in our address search table with the corresponding 268 * 'no_ack' bit is the address search entry cleared. 269 * 270 * buffer_fragment 271 * Indicates that at least one of the rx buffers has been 272 * fragmented. If set the FW should look at the rx_frag_info 273 * descriptor described below. 274 * 275 * mpdu_length_err 276 * Indicates that the MPDU was pre-maturely terminated 277 * resulting in a truncated MPDU. Don't trust the MPDU length 278 * field. 279 * 280 * tkip_mic_err 281 * Indicates that the MPDU Michael integrity check failed 282 * 283 * decrypt_err 284 * Indicates that the MPDU decrypt integrity check failed 285 * 286 * fcs_err 287 * Indicates that the MPDU FCS check failed 288 * 289 * flow_idx_timeout 290 * Indicates an unsuccessful flow search due to the expiring of 291 * the search timer. 292 * 293 * flow_idx_invalid 294 * flow id is not valid. 295 * 296 * amsdu_parser_error 297 * A-MSDU could not be properly de-agregated. 298 * 299 * sa_idx_timeout 300 * Indicates an unsuccessful search for the source MAC address 301 * due to the expiring of the search timer. 302 * 303 * da_idx_timeout 304 * Indicates an unsuccessful search for the destination MAC 305 * address due to the expiring of the search timer. 306 * 307 * msdu_limit_error 308 * Indicates that the MSDU threshold was exceeded and thus 309 * all the rest of the MSDUs will not be scattered and will not 310 * be decasulated but will be DMA'ed in RAW format as a single 311 * MSDU buffer. 312 * 313 * da_is_valid 314 * Indicates that OLE found a valid DA entry. 315 * 316 * da_is_mcbc 317 * Field Only valid if da_is_valid is set. Indicates the DA address 318 * was a Multicast or Broadcast address. 319 * 320 * sa_is_valid 321 * Indicates that OLE found a valid SA entry. 322 * 323 * decrypt_status_code 324 * Field provides insight into the decryption performed. Values are 325 * defined in enum %RX_DESC_DECRYPT_STATUS_CODE*. 326 * 327 * rx_bitmap_not_updated 328 * Frame is received, but RXPCU could not update the receive bitmap 329 * due to (temporary) fifo constraints. 330 * 331 * msdu_done 332 * If set indicates that the RX packet data, RX header data, RX 333 * PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU 334 * start/end descriptors and RX Attention descriptor are all 335 * valid. This bit must be in the last octet of the 336 * descriptor. 337 */ 338 339 #define RX_MPDU_START_INFO0_NDP_FRAME BIT(9) 340 #define RX_MPDU_START_INFO0_PHY_ERR BIT(10) 341 #define RX_MPDU_START_INFO0_PHY_ERR_MPDU_HDR BIT(11) 342 #define RX_MPDU_START_INFO0_PROTO_VER_ERR BIT(12) 343 #define RX_MPDU_START_INFO0_AST_LOOKUP_VALID BIT(13) 344 345 #define RX_MPDU_START_INFO1_MPDU_FCTRL_VALID BIT(0) 346 #define RX_MPDU_START_INFO1_MPDU_DUR_VALID BIT(1) 347 #define RX_MPDU_START_INFO1_MAC_ADDR1_VALID BIT(2) 348 #define RX_MPDU_START_INFO1_MAC_ADDR2_VALID BIT(3) 349 #define RX_MPDU_START_INFO1_MAC_ADDR3_VALID BIT(4) 350 #define RX_MPDU_START_INFO1_MAC_ADDR4_VALID BIT(5) 351 #define RX_MPDU_START_INFO1_MPDU_SEQ_CTRL_VALID BIT(6) 352 #define RX_MPDU_START_INFO1_MPDU_QOS_CTRL_VALID BIT(7) 353 #define RX_MPDU_START_INFO1_MPDU_HT_CTRL_VALID BIT(8) 354 #define RX_MPDU_START_INFO1_ENCRYPT_INFO_VALID BIT(9) 355 #define RX_MPDU_START_INFO1_MPDU_FRAG_NUMBER GENMASK(13, 10) 356 #define RX_MPDU_START_INFO1_MORE_FRAG_FLAG BIT(14) 357 #define RX_MPDU_START_INFO1_FROM_DS BIT(16) 358 #define RX_MPDU_START_INFO1_TO_DS BIT(17) 359 #define RX_MPDU_START_INFO1_ENCRYPTED BIT(18) 360 #define RX_MPDU_START_INFO1_MPDU_RETRY BIT(19) 361 #define RX_MPDU_START_INFO1_MPDU_SEQ_NUM GENMASK(31, 20) 362 363 #define RX_MPDU_START_INFO2_EPD_EN BIT(0) 364 #define RX_MPDU_START_INFO2_ALL_FRAME_ENCPD BIT(1) 365 #define RX_MPDU_START_INFO2_ENC_TYPE GENMASK(5, 2) 366 #define RX_MPDU_START_INFO2_VAR_WEP_KEY_WIDTH GENMASK(7, 6) 367 #define RX_MPDU_START_INFO2_MESH_STA BIT(8) 368 #define RX_MPDU_START_INFO2_BSSID_HIT BIT(9) 369 #define RX_MPDU_START_INFO2_BSSID_NUM GENMASK(13, 10) 370 #define RX_MPDU_START_INFO2_TID GENMASK(17, 14) 371 372 #define RX_MPDU_START_INFO3_REO_DEST_IND GENMASK(4, 0) 373 #define RX_MPDU_START_INFO3_FLOW_ID_TOEPLITZ BIT(7) 374 #define RX_MPDU_START_INFO3_PKT_SEL_FP_UCAST_DATA BIT(8) 375 #define RX_MPDU_START_INFO3_PKT_SEL_FP_MCAST_DATA BIT(9) 376 #define RX_MPDU_START_INFO3_PKT_SEL_FP_CTRL_BAR BIT(10) 377 #define RX_MPDU_START_INFO3_RXDMA0_SRC_RING_SEL GENMASK(12, 11) 378 #define RX_MPDU_START_INFO3_RXDMA0_DST_RING_SEL GENMASK(14, 13) 379 380 #define RX_MPDU_START_INFO4_REO_QUEUE_DESC_HI GENMASK(7, 0) 381 #define RX_MPDU_START_INFO4_RECV_QUEUE_NUM GENMASK(23, 8) 382 #define RX_MPDU_START_INFO4_PRE_DELIM_ERR_WARN BIT(24) 383 #define RX_MPDU_START_INFO4_FIRST_DELIM_ERR BIT(25) 384 385 #define RX_MPDU_START_INFO5_KEY_ID GENMASK(7, 0) 386 #define RX_MPDU_START_INFO5_NEW_PEER_ENTRY BIT(8) 387 #define RX_MPDU_START_INFO5_DECRYPT_NEEDED BIT(9) 388 #define RX_MPDU_START_INFO5_DECAP_TYPE GENMASK(11, 10) 389 #define RX_MPDU_START_INFO5_VLAN_TAG_C_PADDING BIT(12) 390 #define RX_MPDU_START_INFO5_VLAN_TAG_S_PADDING BIT(13) 391 #define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_C BIT(14) 392 #define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_S BIT(15) 393 #define RX_MPDU_START_INFO5_PRE_DELIM_COUNT GENMASK(27, 16) 394 #define RX_MPDU_START_INFO5_AMPDU_FLAG BIT(28) 395 #define RX_MPDU_START_INFO5_BAR_FRAME BIT(29) 396 397 #define RX_MPDU_START_INFO6_MPDU_LEN GENMASK(13, 0) 398 #define RX_MPDU_START_INFO6_FIRST_MPDU BIT(14) 399 #define RX_MPDU_START_INFO6_MCAST_BCAST BIT(15) 400 #define RX_MPDU_START_INFO6_AST_IDX_NOT_FOUND BIT(16) 401 #define RX_MPDU_START_INFO6_AST_IDX_TIMEOUT BIT(17) 402 #define RX_MPDU_START_INFO6_POWER_MGMT BIT(18) 403 #define RX_MPDU_START_INFO6_NON_QOS BIT(19) 404 #define RX_MPDU_START_INFO6_NULL_DATA BIT(20) 405 #define RX_MPDU_START_INFO6_MGMT_TYPE BIT(21) 406 #define RX_MPDU_START_INFO6_CTRL_TYPE BIT(22) 407 #define RX_MPDU_START_INFO6_MORE_DATA BIT(23) 408 #define RX_MPDU_START_INFO6_EOSP BIT(24) 409 #define RX_MPDU_START_INFO6_FRAGMENT BIT(25) 410 #define RX_MPDU_START_INFO6_ORDER BIT(26) 411 #define RX_MPDU_START_INFO6_UAPSD_TRIGGER BIT(27) 412 #define RX_MPDU_START_INFO6_ENCRYPT_REQUIRED BIT(28) 413 #define RX_MPDU_START_INFO6_DIRECTED BIT(29) 414 415 #define RX_MPDU_START_RAW_MPDU BIT(0) 416 417 struct rx_mpdu_start { 418 __le16 info0; 419 __le16 phy_ppdu_id; 420 __le16 ast_index; 421 __le16 sw_peer_id; 422 __le32 info1; 423 __le32 info2; 424 __le32 pn[4]; 425 __le32 peer_meta_data; 426 __le32 info3; 427 __le32 reo_queue_desc_lo; 428 __le32 info4; 429 __le32 info5; 430 __le32 info6; 431 __le16 frame_ctrl; 432 __le16 duration; 433 u8 addr1[ETH_ALEN]; 434 u8 addr2[ETH_ALEN]; 435 u8 addr3[ETH_ALEN]; 436 __le16 seq_ctrl; 437 u8 addr4[ETH_ALEN]; 438 __le16 qos_ctrl; 439 __le32 ht_ctrl; 440 __le32 raw; 441 } __packed; 442 443 /* rx_mpdu_start 444 * 445 * rxpcu_mpdu_filter_in_category 446 * Field indicates what the reason was that this mpdu frame 447 * was allowed to come into the receive path by rxpcu. Values 448 * are defined in enum %RX_DESC_RXPCU_FILTER_*. 449 * Note: for ndp frame, if it was expected because the preceding 450 * NDPA was filter_pass, the setting rxpcu_filter_pass will be 451 * used. This setting will also be used for every ndp frame in 452 * case Promiscuous mode is enabled. 453 * 454 * sw_frame_group_id 455 * SW processes frames based on certain classifications. Values 456 * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. 457 * 458 * ndp_frame 459 * Indicates that the received frame was an NDP frame. 460 * 461 * phy_err 462 * Indicates that PHY error was received before MAC received data. 463 * 464 * phy_err_during_mpdu_header 465 * PHY error was received before MAC received the complete MPDU 466 * header which was needed for proper decoding. 467 * 468 * protocol_version_err 469 * RXPCU detected a version error in the frame control field. 470 * 471 * ast_based_lookup_valid 472 * AST based lookup for this frame has found a valid result. 473 * 474 * phy_ppdu_id 475 * A ppdu counter value that PHY increments for every PPDU 476 * received. The counter value wraps around. 477 * 478 * ast_index 479 * This field indicates the index of the AST entry corresponding 480 * to this MPDU. It is provided by the GSE module instantiated in 481 * RXPCU. A value of 0xFFFF indicates an invalid AST index. 482 * 483 * sw_peer_id 484 * This field indicates a unique peer identifier. It is set equal 485 * to field 'sw_peer_id' from the AST entry. 486 * 487 * mpdu_frame_control_valid, mpdu_duration_valid, mpdu_qos_control_valid, 488 * mpdu_ht_control_valid, frame_encryption_info_valid 489 * Indicates that each fields have valid entries. 490 * 491 * mac_addr_adx_valid 492 * Corresponding mac_addr_adx_{lo/hi} has valid entries. 493 * 494 * from_ds, to_ds 495 * Valid only when mpdu_frame_control_valid is set. Indicates that 496 * frame is received from DS and sent to DS. 497 * 498 * encrypted 499 * Protected bit from the frame control. 500 * 501 * mpdu_retry 502 * Retry bit from frame control. Only valid when first_msdu is set. 503 * 504 * mpdu_sequence_number 505 * The sequence number from the 802.11 header. 506 * 507 * epd_en 508 * If set, use EPD instead of LPD. 509 * 510 * all_frames_shall_be_encrypted 511 * If set, all frames (data only?) shall be encrypted. If not, 512 * RX CRYPTO shall set an error flag. 513 * 514 * encrypt_type 515 * Values are defined in enum %HAL_ENCRYPT_TYPE_. 516 * 517 * mesh_sta 518 * Indicates a Mesh (11s) STA. 519 * 520 * bssid_hit 521 * BSSID of the incoming frame matched one of the 8 BSSID 522 * register values. 523 * 524 * bssid_number 525 * This number indicates which one out of the 8 BSSID register 526 * values matched the incoming frame. 527 * 528 * tid 529 * TID field in the QoS control field 530 * 531 * pn 532 * The PN number. 533 * 534 * peer_meta_data 535 * Meta data that SW has programmed in the Peer table entry 536 * of the transmitting STA. 537 * 538 * rx_reo_queue_desc_addr_lo 539 * Address (lower 32 bits) of the REO queue descriptor. 540 * 541 * rx_reo_queue_desc_addr_hi 542 * Address (upper 8 bits) of the REO queue descriptor. 543 * 544 * receive_queue_number 545 * Indicates the MPDU queue ID to which this MPDU link 546 * descriptor belongs. 547 * 548 * pre_delim_err_warning 549 * Indicates that a delimiter FCS error was found in between the 550 * previous MPDU and this MPDU. Note that this is just a warning, 551 * and does not mean that this MPDU is corrupted in any way. If 552 * it is, there will be other errors indicated such as FCS or 553 * decrypt errors. 554 * 555 * first_delim_err 556 * Indicates that the first delimiter had a FCS failure. 557 * 558 * key_id 559 * The key ID octet from the IV. 560 * 561 * new_peer_entry 562 * Set if new RX_PEER_ENTRY TLV follows. If clear, RX_PEER_ENTRY 563 * doesn't follow so RX DECRYPTION module either uses old peer 564 * entry or not decrypt. 565 * 566 * decrypt_needed 567 * When RXPCU sets bit 'ast_index_not_found or ast_index_timeout', 568 * RXPCU will also ensure that this bit is NOT set. CRYPTO for that 569 * reason only needs to evaluate this bit and non of the other ones 570 * 571 * decap_type 572 * Used by the OLE during decapsulation. Values are defined in 573 * enum %MPDU_START_DECAP_TYPE_*. 574 * 575 * rx_insert_vlan_c_tag_padding 576 * rx_insert_vlan_s_tag_padding 577 * Insert 4 byte of all zeros as VLAN tag or double VLAN tag if 578 * the rx payload does not have VLAN. 579 * 580 * strip_vlan_c_tag_decap 581 * strip_vlan_s_tag_decap 582 * Strip VLAN or double VLAN during decapsulation. 583 * 584 * pre_delim_count 585 * The number of delimiters before this MPDU. Note that this 586 * number is cleared at PPDU start. If this MPDU is the first 587 * received MPDU in the PPDU and this MPDU gets filtered-in, 588 * this field will indicate the number of delimiters located 589 * after the last MPDU in the previous PPDU. 590 * 591 * If this MPDU is located after the first received MPDU in 592 * an PPDU, this field will indicate the number of delimiters 593 * located between the previous MPDU and this MPDU. 594 * 595 * ampdu_flag 596 * Received frame was part of an A-MPDU. 597 * 598 * bar_frame 599 * Received frame is a BAR frame 600 * 601 * mpdu_length 602 * MPDU length before decapsulation. 603 * 604 * first_mpdu..directed 605 * See definition in RX attention descriptor 606 * 607 */ 608 609 enum rx_msdu_start_pkt_type { 610 RX_MSDU_START_PKT_TYPE_11A, 611 RX_MSDU_START_PKT_TYPE_11B, 612 RX_MSDU_START_PKT_TYPE_11N, 613 RX_MSDU_START_PKT_TYPE_11AC, 614 RX_MSDU_START_PKT_TYPE_11AX, 615 }; 616 617 enum rx_msdu_start_sgi { 618 RX_MSDU_START_SGI_0_8_US, 619 RX_MSDU_START_SGI_0_4_US, 620 RX_MSDU_START_SGI_1_6_US, 621 RX_MSDU_START_SGI_3_2_US, 622 }; 623 624 enum rx_msdu_start_recv_bw { 625 RX_MSDU_START_RECV_BW_20MHZ, 626 RX_MSDU_START_RECV_BW_40MHZ, 627 RX_MSDU_START_RECV_BW_80MHZ, 628 RX_MSDU_START_RECV_BW_160MHZ, 629 }; 630 631 enum rx_msdu_start_reception_type { 632 RX_MSDU_START_RECEPTION_TYPE_SU, 633 RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO, 634 RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA, 635 RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO, 636 RX_MSDU_START_RECEPTION_TYPE_UL_MU_MIMO, 637 RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA, 638 RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA_MIMO, 639 }; 640 641 #define RX_MSDU_START_INFO1_MSDU_LENGTH GENMASK(13, 0) 642 #define RX_MSDU_START_INFO1_RSVD_1A BIT(14) 643 #define RX_MSDU_START_INFO1_IPSEC_ESP BIT(15) 644 #define RX_MSDU_START_INFO1_L3_OFFSET GENMASK(22, 16) 645 #define RX_MSDU_START_INFO1_IPSEC_AH BIT(23) 646 #define RX_MSDU_START_INFO1_L4_OFFSET GENMASK(31, 24) 647 648 #define RX_MSDU_START_INFO2_MSDU_NUMBER GENMASK(7, 0) 649 #define RX_MSDU_START_INFO2_DECAP_TYPE GENMASK(9, 8) 650 #define RX_MSDU_START_INFO2_IPV4 BIT(10) 651 #define RX_MSDU_START_INFO2_IPV6 BIT(11) 652 #define RX_MSDU_START_INFO2_TCP BIT(12) 653 #define RX_MSDU_START_INFO2_UDP BIT(13) 654 #define RX_MSDU_START_INFO2_IP_FRAG BIT(14) 655 #define RX_MSDU_START_INFO2_TCP_ONLY_ACK BIT(15) 656 #define RX_MSDU_START_INFO2_DA_IS_BCAST_MCAST BIT(16) 657 #define RX_MSDU_START_INFO2_SELECTED_TOEPLITZ_HASH GENMASK(18, 17) 658 #define RX_MSDU_START_INFO2_IP_FIXED_HDR_VALID BIT(19) 659 #define RX_MSDU_START_INFO2_IP_EXTN_HDR_VALID BIT(20) 660 #define RX_MSDU_START_INFO2_IP_TCP_UDP_HDR_VALID BIT(21) 661 #define RX_MSDU_START_INFO2_MESH_CTRL_PRESENT BIT(22) 662 #define RX_MSDU_START_INFO2_LDPC BIT(23) 663 #define RX_MSDU_START_INFO2_IP4_IP6_NXT_HDR GENMASK(31, 24) 664 #define RX_MSDU_START_INFO2_DECAP_FORMAT GENMASK(9, 8) 665 666 #define RX_MSDU_START_INFO3_USER_RSSI GENMASK(7, 0) 667 #define RX_MSDU_START_INFO3_PKT_TYPE GENMASK(11, 8) 668 #define RX_MSDU_START_INFO3_STBC BIT(12) 669 #define RX_MSDU_START_INFO3_SGI GENMASK(14, 13) 670 #define RX_MSDU_START_INFO3_RATE_MCS GENMASK(18, 15) 671 #define RX_MSDU_START_INFO3_RECV_BW GENMASK(20, 19) 672 #define RX_MSDU_START_INFO3_RECEPTION_TYPE GENMASK(23, 21) 673 #define RX_MSDU_START_INFO3_MIMO_SS_BITMAP GENMASK(31, 24) 674 675 struct rx_msdu_start { 676 __le16 info0; 677 __le16 phy_ppdu_id; 678 __le32 info1; 679 __le32 info2; 680 __le32 toeplitz_hash; 681 __le32 flow_id_toeplitz; 682 __le32 info3; 683 __le32 ppdu_start_timestamp; 684 __le32 phy_meta_data; 685 } __packed; 686 687 /* rx_msdu_start 688 * 689 * rxpcu_mpdu_filter_in_category 690 * Field indicates what the reason was that this mpdu frame 691 * was allowed to come into the receive path by rxpcu. Values 692 * are defined in enum %RX_DESC_RXPCU_FILTER_*. 693 * 694 * sw_frame_group_id 695 * SW processes frames based on certain classifications. Values 696 * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. 697 * 698 * phy_ppdu_id 699 * A ppdu counter value that PHY increments for every PPDU 700 * received. The counter value wraps around. 701 * 702 * msdu_length 703 * MSDU length in bytes after decapsulation. 704 * 705 * ipsec_esp 706 * Set if IPv4/v6 packet is using IPsec ESP. 707 * 708 * l3_offset 709 * Depending upon mode bit, this field either indicates the 710 * L3 offset in bytes from the start of the RX_HEADER or the IP 711 * offset in bytes from the start of the packet after 712 * decapsulation. The latter is only valid if ipv4_proto or 713 * ipv6_proto is set. 714 * 715 * ipsec_ah 716 * Set if IPv4/v6 packet is using IPsec AH 717 * 718 * l4_offset 719 * Depending upon mode bit, this field either indicates the 720 * L4 offset nin bytes from the start of RX_HEADER (only valid 721 * if either ipv4_proto or ipv6_proto is set to 1) or indicates 722 * the offset in bytes to the start of TCP or UDP header from 723 * the start of the IP header after decapsulation (Only valid if 724 * tcp_proto or udp_proto is set). The value 0 indicates that 725 * the offset is longer than 127 bytes. 726 * 727 * msdu_number 728 * Indicates the MSDU number within a MPDU. This value is 729 * reset to zero at the start of each MPDU. If the number of 730 * MSDU exceeds 255 this number will wrap using modulo 256. 731 * 732 * decap_type 733 * Indicates the format after decapsulation. Values are defined in 734 * enum %MPDU_START_DECAP_TYPE_*. 735 * 736 * ipv4_proto 737 * Set if L2 layer indicates IPv4 protocol. 738 * 739 * ipv6_proto 740 * Set if L2 layer indicates IPv6 protocol. 741 * 742 * tcp_proto 743 * Set if the ipv4_proto or ipv6_proto are set and the IP protocol 744 * indicates TCP. 745 * 746 * udp_proto 747 * Set if the ipv4_proto or ipv6_proto are set and the IP protocol 748 * indicates UDP. 749 * 750 * ip_frag 751 * Indicates that either the IP More frag bit is set or IP frag 752 * number is non-zero. If set indicates that this is a fragmented 753 * IP packet. 754 * 755 * tcp_only_ack 756 * Set if only the TCP Ack bit is set in the TCP flags and if 757 * the TCP payload is 0. 758 * 759 * da_is_bcast_mcast 760 * The destination address is broadcast or multicast. 761 * 762 * toeplitz_hash 763 * Actual chosen Hash. 764 * 0 - Toeplitz hash of 2-tuple (IP source address, IP 765 * destination address) 766 * 1 - Toeplitz hash of 4-tuple (IP source address, 767 * IP destination address, L4 (TCP/UDP) source port, 768 * L4 (TCP/UDP) destination port) 769 * 2 - Toeplitz of flow_id 770 * 3 - Zero is used 771 * 772 * ip_fixed_header_valid 773 * Fixed 20-byte IPv4 header or 40-byte IPv6 header parsed 774 * fully within first 256 bytes of the packet 775 * 776 * ip_extn_header_valid 777 * IPv6/IPv6 header, including IPv4 options and 778 * recognizable extension headers parsed fully within first 256 779 * bytes of the packet 780 * 781 * tcp_udp_header_valid 782 * Fixed 20-byte TCP (excluding TCP options) or 8-byte UDP 783 * header parsed fully within first 256 bytes of the packet 784 * 785 * mesh_control_present 786 * When set, this MSDU includes the 'Mesh Control' field 787 * 788 * ldpc 789 * 790 * ip4_protocol_ip6_next_header 791 * For IPv4, this is the 8 bit protocol field set). For IPv6 this 792 * is the 8 bit next_header field. 793 * 794 * toeplitz_hash_2_or_4 795 * Controlled by RxOLE register - If register bit set to 0, 796 * Toeplitz hash is computed over 2-tuple IPv4 or IPv6 src/dest 797 * addresses; otherwise, toeplitz hash is computed over 4-tuple 798 * IPv4 or IPv6 src/dest addresses and src/dest ports. 799 * 800 * flow_id_toeplitz 801 * Toeplitz hash of 5-tuple 802 * {IP source address, IP destination address, IP source port, IP 803 * destination port, L4 protocol} in case of non-IPSec. 804 * 805 * In case of IPSec - Toeplitz hash of 4-tuple 806 * {IP source address, IP destination address, SPI, L4 protocol} 807 * 808 * The relevant Toeplitz key registers are provided in RxOLE's 809 * instance of common parser module. These registers are separate 810 * from the Toeplitz keys used by ASE/FSE modules inside RxOLE. 811 * The actual value will be passed on from common parser module 812 * to RxOLE in one of the WHO_* TLVs. 813 * 814 * user_rssi 815 * RSSI for this user 816 * 817 * pkt_type 818 * Values are defined in enum %RX_MSDU_START_PKT_TYPE_*. 819 * 820 * stbc 821 * When set, use STBC transmission rates. 822 * 823 * sgi 824 * Field only valid when pkt type is HT, VHT or HE. Values are 825 * defined in enum %RX_MSDU_START_SGI_*. 826 * 827 * rate_mcs 828 * MCS Rate used. 829 * 830 * receive_bandwidth 831 * Full receive Bandwidth. Values are defined in enum 832 * %RX_MSDU_START_RECV_*. 833 * 834 * reception_type 835 * Indicates what type of reception this is and defined in enum 836 * %RX_MSDU_START_RECEPTION_TYPE_*. 837 * 838 * mimo_ss_bitmap 839 * Field only valid when 840 * Reception_type is RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO or 841 * RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO. 842 * 843 * Bitmap, with each bit indicating if the related spatial 844 * stream is used for this STA 845 * 846 * LSB related to SS 0 847 * 848 * 0 - spatial stream not used for this reception 849 * 1 - spatial stream used for this reception 850 * 851 * ppdu_start_timestamp 852 * Timestamp that indicates when the PPDU that contained this MPDU 853 * started on the medium. 854 * 855 * phy_meta_data 856 * SW programmed Meta data provided by the PHY. Can be used for SW 857 * to indicate the channel the device is on. 858 */ 859 860 #define RX_MSDU_END_INFO0_RXPCU_MPDU_FITLER GENMASK(1, 0) 861 #define RX_MSDU_END_INFO0_SW_FRAME_GRP_ID GENMASK(8, 2) 862 863 #define RX_MSDU_END_INFO1_KEY_ID GENMASK(7, 0) 864 #define RX_MSDU_END_INFO1_CCE_SUPER_RULE GENMASK(13, 8) 865 #define RX_MSDU_END_INFO1_CCND_TRUNCATE BIT(14) 866 #define RX_MSDU_END_INFO1_CCND_CCE_DIS BIT(15) 867 #define RX_MSDU_END_INFO1_EXT_WAPI_PN GENMASK(31, 16) 868 869 #define RX_MSDU_END_INFO2_REPORTED_MPDU_LEN GENMASK(13, 0) 870 #define RX_MSDU_END_INFO2_FIRST_MSDU BIT(14) 871 #define RX_MSDU_END_INFO2_LAST_MSDU BIT(15) 872 #define RX_MSDU_END_INFO2_SA_IDX_TIMEOUT BIT(16) 873 #define RX_MSDU_END_INFO2_DA_IDX_TIMEOUT BIT(17) 874 #define RX_MSDU_END_INFO2_MSDU_LIMIT_ERR BIT(18) 875 #define RX_MSDU_END_INFO2_FLOW_IDX_TIMEOUT BIT(19) 876 #define RX_MSDU_END_INFO2_FLOW_IDX_INVALID BIT(20) 877 #define RX_MSDU_END_INFO2_WIFI_PARSER_ERR BIT(21) 878 #define RX_MSDU_END_INFO2_AMSDU_PARSET_ERR BIT(22) 879 #define RX_MSDU_END_INFO2_SA_IS_VALID BIT(23) 880 #define RX_MSDU_END_INFO2_DA_IS_VALID BIT(24) 881 #define RX_MSDU_END_INFO2_DA_IS_MCBC BIT(25) 882 #define RX_MSDU_END_INFO2_L3_HDR_PADDING GENMASK(27, 26) 883 884 #define RX_MSDU_END_INFO3_TCP_FLAG GENMASK(8, 0) 885 #define RX_MSDU_END_INFO3_LRO_ELIGIBLE BIT(9) 886 887 #define RX_MSDU_END_INFO4_DA_OFFSET GENMASK(5, 0) 888 #define RX_MSDU_END_INFO4_SA_OFFSET GENMASK(11, 6) 889 #define RX_MSDU_END_INFO4_DA_OFFSET_VALID BIT(12) 890 #define RX_MSDU_END_INFO4_SA_OFFSET_VALID BIT(13) 891 #define RX_MSDU_END_INFO4_L3_TYPE GENMASK(31, 16) 892 893 #define RX_MSDU_END_INFO5_MSDU_DROP BIT(0) 894 #define RX_MSDU_END_INFO5_REO_DEST_IND GENMASK(5, 1) 895 #define RX_MSDU_END_INFO5_FLOW_IDX GENMASK(25, 6) 896 897 struct rx_msdu_end { 898 __le16 info0; 899 __le16 phy_ppdu_id; 900 __le16 ip_hdr_cksum; 901 __le16 tcp_udp_cksum; 902 __le32 info1; 903 __le32 ext_wapi_pn[2]; 904 __le32 info2; 905 __le32 ipv6_options_crc; 906 __le32 tcp_seq_num; 907 __le32 tcp_ack_num; 908 __le16 info3; 909 __le16 window_size; 910 __le32 info4; 911 __le32 rule_indication[2]; 912 __le16 sa_idx; 913 __le16 da_idx; 914 __le32 info5; 915 __le32 fse_metadata; 916 __le16 cce_metadata; 917 __le16 sa_sw_peer_id; 918 } __packed; 919 920 /* rx_msdu_end 921 * 922 * rxpcu_mpdu_filter_in_category 923 * Field indicates what the reason was that this mpdu frame 924 * was allowed to come into the receive path by rxpcu. Values 925 * are defined in enum %RX_DESC_RXPCU_FILTER_*. 926 * 927 * sw_frame_group_id 928 * SW processes frames based on certain classifications. Values 929 * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. 930 * 931 * phy_ppdu_id 932 * A ppdu counter value that PHY increments for every PPDU 933 * received. The counter value wraps around. 934 * 935 * ip_hdr_cksum 936 * This can include the IP header checksum or the pseudo 937 * header checksum used by TCP/UDP checksum. 938 * 939 * tcp_udp_chksum 940 * The value of the computed TCP/UDP checksum. A mode bit 941 * selects whether this checksum is the full checksum or the 942 * partial checksum which does not include the pseudo header. 943 * 944 * key_id 945 * The key ID octet from the IV. Only valid when first_msdu is set. 946 * 947 * cce_super_rule 948 * Indicates the super filter rule. 949 * 950 * cce_classify_not_done_truncate 951 * Classification failed due to truncated frame. 952 * 953 * cce_classify_not_done_cce_dis 954 * Classification failed due to CCE global disable 955 * 956 * ext_wapi_pn* 957 * Extension PN (packet number) which is only used by WAPI. 958 * 959 * reported_mpdu_length 960 * MPDU length before decapsulation. Only valid when first_msdu is 961 * set. This field is taken directly from the length field of the 962 * A-MPDU delimiter or the preamble length field for non-A-MPDU 963 * frames. 964 * 965 * first_msdu 966 * Indicates the first MSDU of A-MSDU. If both first_msdu and 967 * last_msdu are set in the MSDU then this is a non-aggregated MSDU 968 * frame: normal MPDU. Interior MSDU in an A-MSDU shall have both 969 * first_mpdu and last_mpdu bits set to 0. 970 * 971 * last_msdu 972 * Indicates the last MSDU of the A-MSDU. MPDU end status is only 973 * valid when last_msdu is set. 974 * 975 * sa_idx_timeout 976 * Indicates an unsuccessful MAC source address search due to the 977 * expiring of the search timer. 978 * 979 * da_idx_timeout 980 * Indicates an unsuccessful MAC destination address search due to 981 * the expiring of the search timer. 982 * 983 * msdu_limit_error 984 * Indicates that the MSDU threshold was exceeded and thus all the 985 * rest of the MSDUs will not be scattered and will not be 986 * decapsulated but will be DMA'ed in RAW format as a single MSDU. 987 * 988 * flow_idx_timeout 989 * Indicates an unsuccessful flow search due to the expiring of 990 * the search timer. 991 * 992 * flow_idx_invalid 993 * flow id is not valid. 994 * 995 * amsdu_parser_error 996 * A-MSDU could not be properly de-agregated. 997 * 998 * sa_is_valid 999 * Indicates that OLE found a valid SA entry. 1000 * 1001 * da_is_valid 1002 * Indicates that OLE found a valid DA entry. 1003 * 1004 * da_is_mcbc 1005 * Field Only valid if da_is_valid is set. Indicates the DA address 1006 * was a Multicast of Broadcast address. 1007 * 1008 * l3_header_padding 1009 * Number of bytes padded to make sure that the L3 header will 1010 * always start of a Dword boundary. 1011 * 1012 * ipv6_options_crc 1013 * 32 bit CRC computed out of IP v6 extension headers. 1014 * 1015 * tcp_seq_number 1016 * TCP sequence number. 1017 * 1018 * tcp_ack_number 1019 * TCP acknowledge number. 1020 * 1021 * tcp_flag 1022 * TCP flags {NS, CWR, ECE, URG, ACK, PSH, RST, SYN, FIN}. 1023 * 1024 * lro_eligible 1025 * Computed out of TCP and IP fields to indicate that this 1026 * MSDU is eligible for LRO. 1027 * 1028 * window_size 1029 * TCP receive window size. 1030 * 1031 * da_offset 1032 * Offset into MSDU buffer for DA. 1033 * 1034 * sa_offset 1035 * Offset into MSDU buffer for SA. 1036 * 1037 * da_offset_valid 1038 * da_offset field is valid. This will be set to 0 in case 1039 * of a dynamic A-MSDU when DA is compressed. 1040 * 1041 * sa_offset_valid 1042 * sa_offset field is valid. This will be set to 0 in case 1043 * of a dynamic A-MSDU when SA is compressed. 1044 * 1045 * l3_type 1046 * The 16-bit type value indicating the type of L3 later 1047 * extracted from LLC/SNAP, set to zero if SNAP is not 1048 * available. 1049 * 1050 * rule_indication 1051 * Bitmap indicating which of rules have matched. 1052 * 1053 * sa_idx 1054 * The offset in the address table which matches MAC source address 1055 * 1056 * da_idx 1057 * The offset in the address table which matches MAC destination 1058 * address. 1059 * 1060 * msdu_drop 1061 * REO shall drop this MSDU and not forward it to any other ring. 1062 * 1063 * reo_destination_indication 1064 * The id of the reo exit ring where the msdu frame shall push 1065 * after (MPDU level) reordering has finished. Values are defined 1066 * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. 1067 * 1068 * flow_idx 1069 * Flow table index. 1070 * 1071 * fse_metadata 1072 * FSE related meta data. 1073 * 1074 * cce_metadata 1075 * CCE related meta data. 1076 * 1077 * sa_sw_peer_id 1078 * sw_peer_id from the address search entry corresponding to the 1079 * source address of the MSDU. 1080 */ 1081 1082 enum rx_mpdu_end_rxdma_dest_ring { 1083 RX_MPDU_END_RXDMA_DEST_RING_RELEASE, 1084 RX_MPDU_END_RXDMA_DEST_RING_FW, 1085 RX_MPDU_END_RXDMA_DEST_RING_SW, 1086 RX_MPDU_END_RXDMA_DEST_RING_REO, 1087 }; 1088 1089 #define RX_MPDU_END_INFO1_UNSUP_KTYPE_SHORT_FRAME BIT(11) 1090 #define RX_MPDU_END_INFO1_RX_IN_TX_DECRYPT_BYT BIT(12) 1091 #define RX_MPDU_END_INFO1_OVERFLOW_ERR BIT(13) 1092 #define RX_MPDU_END_INFO1_MPDU_LEN_ERR BIT(14) 1093 #define RX_MPDU_END_INFO1_TKIP_MIC_ERR BIT(15) 1094 #define RX_MPDU_END_INFO1_DECRYPT_ERR BIT(16) 1095 #define RX_MPDU_END_INFO1_UNENCRYPTED_FRAME_ERR BIT(17) 1096 #define RX_MPDU_END_INFO1_PN_FIELDS_VALID BIT(18) 1097 #define RX_MPDU_END_INFO1_FCS_ERR BIT(19) 1098 #define RX_MPDU_END_INFO1_MSDU_LEN_ERR BIT(20) 1099 #define RX_MPDU_END_INFO1_RXDMA0_DEST_RING GENMASK(22, 21) 1100 #define RX_MPDU_END_INFO1_RXDMA1_DEST_RING GENMASK(24, 23) 1101 #define RX_MPDU_END_INFO1_DECRYPT_STATUS_CODE GENMASK(27, 25) 1102 #define RX_MPDU_END_INFO1_RX_BITMAP_NOT_UPD BIT(28) 1103 1104 struct rx_mpdu_end { 1105 __le16 info0; 1106 __le16 phy_ppdu_id; 1107 __le32 info1; 1108 } __packed; 1109 1110 /* rx_mpdu_end 1111 * 1112 * rxpcu_mpdu_filter_in_category 1113 * Field indicates what the reason was that this mpdu frame 1114 * was allowed to come into the receive path by rxpcu. Values 1115 * are defined in enum %RX_DESC_RXPCU_FILTER_*. 1116 * 1117 * sw_frame_group_id 1118 * SW processes frames based on certain classifications. Values 1119 * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. 1120 * 1121 * phy_ppdu_id 1122 * A ppdu counter value that PHY increments for every PPDU 1123 * received. The counter value wraps around. 1124 * 1125 * unsup_ktype_short_frame 1126 * This bit will be '1' when WEP or TKIP or WAPI key type is 1127 * received for 11ah short frame. Crypto will bypass the received 1128 * packet without decryption to RxOLE after setting this bit. 1129 * 1130 * rx_in_tx_decrypt_byp 1131 * Indicates that RX packet is not decrypted as Crypto is 1132 * busy with TX packet processing. 1133 * 1134 * overflow_err 1135 * RXPCU Receive FIFO ran out of space to receive the full MPDU. 1136 * Therefore this MPDU is terminated early and is thus corrupted. 1137 * 1138 * This MPDU will not be ACKed. 1139 * 1140 * RXPCU might still be able to correctly receive the following 1141 * MPDUs in the PPDU if enough fifo space became available in time. 1142 * 1143 * mpdu_length_err 1144 * Set by RXPCU if the expected MPDU length does not correspond 1145 * with the actually received number of bytes in the MPDU. 1146 * 1147 * tkip_mic_err 1148 * Set by Rx crypto when crypto detected a TKIP MIC error for 1149 * this MPDU. 1150 * 1151 * decrypt_err 1152 * Set by RX CRYPTO when CRYPTO detected a decrypt error for this 1153 * MPDU or CRYPTO received an encrypted frame, but did not get a 1154 * valid corresponding key id in the peer entry. 1155 * 1156 * unencrypted_frame_err 1157 * Set by RX CRYPTO when CRYPTO detected an unencrypted frame while 1158 * in the peer entry field 'All_frames_shall_be_encrypted' is set. 1159 * 1160 * pn_fields_contain_valid_info 1161 * Set by RX CRYPTO to indicate that there is a valid PN field 1162 * present in this MPDU. 1163 * 1164 * fcs_err 1165 * Set by RXPCU when there is an FCS error detected for this MPDU. 1166 * 1167 * msdu_length_err 1168 * Set by RXOLE when there is an msdu length error detected 1169 * in at least 1 of the MSDUs embedded within the MPDU. 1170 * 1171 * rxdma0_destination_ring 1172 * rxdma1_destination_ring 1173 * The ring to which RXDMA0/1 shall push the frame, assuming 1174 * no MPDU level errors are detected. In case of MPDU level 1175 * errors, RXDMA0/1 might change the RXDMA0/1 destination. Values 1176 * are defined in %enum RX_MPDU_END_RXDMA_DEST_RING_*. 1177 * 1178 * decrypt_status_code 1179 * Field provides insight into the decryption performed. Values 1180 * are defined in enum %RX_DESC_DECRYPT_STATUS_CODE_*. 1181 * 1182 * rx_bitmap_not_updated 1183 * Frame is received, but RXPCU could not update the receive bitmap 1184 * due to (temporary) fifo constraints. 1185 */ 1186 1187 /* Padding bytes to avoid TLV's spanning across 128 byte boundary */ 1188 #define HAL_RX_DESC_PADDING0_BYTES 4 1189 #define HAL_RX_DESC_PADDING1_BYTES 16 1190 1191 #define HAL_RX_DESC_HDR_STATUS_LEN 120 1192 1193 struct hal_rx_desc { 1194 __le32 msdu_end_tag; 1195 struct rx_msdu_end msdu_end; 1196 __le32 rx_attn_tag; 1197 struct rx_attention attention; 1198 __le32 msdu_start_tag; 1199 struct rx_msdu_start msdu_start; 1200 u8 rx_padding0[HAL_RX_DESC_PADDING0_BYTES]; 1201 __le32 mpdu_start_tag; 1202 struct rx_mpdu_start mpdu_start; 1203 __le32 mpdu_end_tag; 1204 struct rx_mpdu_end mpdu_end; 1205 u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES]; 1206 __le32 hdr_status_tag; 1207 __le32 phy_ppdu_id; 1208 u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN]; 1209 u8 msdu_payload[0]; 1210 } __packed; 1211 1212 #define HAL_RX_RU_ALLOC_TYPE_MAX 6 1213 #define RU_26 1 1214 #define RU_52 2 1215 #define RU_106 4 1216 #define RU_242 9 1217 #define RU_484 18 1218 #define RU_996 37 1219 1220 #endif /* ATH11K_RX_DESC_H */ 1221