xref: /openbmc/linux/drivers/net/wireless/ath/ath11k/mac.h (revision dc6a81c3)
1 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
2 /*
3  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
4  */
5 
6 #ifndef ATH11K_MAC_H
7 #define ATH11K_MAC_H
8 
9 #include <net/mac80211.h>
10 #include <net/cfg80211.h>
11 
12 struct ath11k;
13 struct ath11k_base;
14 
15 struct ath11k_generic_iter {
16 	struct ath11k *ar;
17 	int ret;
18 };
19 
20 /* number of failed packets (20 packets with 16 sw reties each) */
21 #define ATH11K_KICKOUT_THRESHOLD		(20 * 16)
22 
23 /* Use insanely high numbers to make sure that the firmware implementation
24  * won't start, we have the same functionality already in hostapd. Unit
25  * is seconds.
26  */
27 #define ATH11K_KEEPALIVE_MIN_IDLE		3747
28 #define ATH11K_KEEPALIVE_MAX_IDLE		3895
29 #define ATH11K_KEEPALIVE_MAX_UNRESPONSIVE	3900
30 
31 #define WMI_HOST_RC_DS_FLAG			0x01
32 #define WMI_HOST_RC_CW40_FLAG			0x02
33 #define WMI_HOST_RC_SGI_FLAG			0x04
34 #define WMI_HOST_RC_HT_FLAG			0x08
35 #define WMI_HOST_RC_RTSCTS_FLAG			0x10
36 #define WMI_HOST_RC_TX_STBC_FLAG		0x20
37 #define WMI_HOST_RC_RX_STBC_FLAG		0xC0
38 #define WMI_HOST_RC_RX_STBC_FLAG_S		6
39 #define WMI_HOST_RC_WEP_TKIP_FLAG		0x100
40 #define WMI_HOST_RC_TS_FLAG			0x200
41 #define WMI_HOST_RC_UAPSD_FLAG			0x400
42 
43 #define WMI_HT_CAP_ENABLED			0x0001
44 #define WMI_HT_CAP_HT20_SGI			0x0002
45 #define WMI_HT_CAP_DYNAMIC_SMPS			0x0004
46 #define WMI_HT_CAP_TX_STBC			0x0008
47 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT		3
48 #define WMI_HT_CAP_RX_STBC			0x0030
49 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT		4
50 #define WMI_HT_CAP_LDPC				0x0040
51 #define WMI_HT_CAP_L_SIG_TXOP_PROT		0x0080
52 #define WMI_HT_CAP_MPDU_DENSITY			0x0700
53 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT	8
54 #define WMI_HT_CAP_HT40_SGI			0x0800
55 #define WMI_HT_CAP_RX_LDPC			0x1000
56 #define WMI_HT_CAP_TX_LDPC			0x2000
57 #define WMI_HT_CAP_IBF_BFER			0x4000
58 
59 /* These macros should be used when we wish to advertise STBC support for
60  * only 1SS or 2SS or 3SS.
61  */
62 #define WMI_HT_CAP_RX_STBC_1SS			0x0010
63 #define WMI_HT_CAP_RX_STBC_2SS			0x0020
64 #define WMI_HT_CAP_RX_STBC_3SS			0x0030
65 
66 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED    | \
67 				WMI_HT_CAP_HT20_SGI   | \
68 				WMI_HT_CAP_HT40_SGI   | \
69 				WMI_HT_CAP_TX_STBC    | \
70 				WMI_HT_CAP_RX_STBC    | \
71 				WMI_HT_CAP_LDPC)
72 
73 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK		0x00000003
74 #define WMI_VHT_CAP_RX_LDPC			0x00000010
75 #define WMI_VHT_CAP_SGI_80MHZ			0x00000020
76 #define WMI_VHT_CAP_SGI_160MHZ			0x00000040
77 #define WMI_VHT_CAP_TX_STBC			0x00000080
78 #define WMI_VHT_CAP_RX_STBC_MASK		0x00000300
79 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT		8
80 #define WMI_VHT_CAP_SU_BFER			0x00000800
81 #define WMI_VHT_CAP_SU_BFEE			0x00001000
82 #define WMI_VHT_CAP_MAX_CS_ANT_MASK		0x0000E000
83 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT	13
84 #define WMI_VHT_CAP_MAX_SND_DIM_MASK		0x00070000
85 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT	16
86 #define WMI_VHT_CAP_MU_BFER			0x00080000
87 #define WMI_VHT_CAP_MU_BFEE			0x00100000
88 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP		0x03800000
89 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT	23
90 #define WMI_VHT_CAP_RX_FIXED_ANT		0x10000000
91 #define WMI_VHT_CAP_TX_FIXED_ANT		0x20000000
92 
93 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454		0x00000002
94 
95 /* These macros should be used when we wish to advertise STBC support for
96  * only 1SS or 2SS or 3SS.
97  */
98 #define WMI_VHT_CAP_RX_STBC_1SS			0x00000100
99 #define WMI_VHT_CAP_RX_STBC_2SS			0x00000200
100 #define WMI_VHT_CAP_RX_STBC_3SS			0x00000300
101 
102 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
103 				 WMI_VHT_CAP_SGI_80MHZ      |       \
104 				 WMI_VHT_CAP_TX_STBC        |       \
105 				 WMI_VHT_CAP_RX_STBC_MASK   |       \
106 				 WMI_VHT_CAP_RX_LDPC        |       \
107 				 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   |  \
108 				 WMI_VHT_CAP_RX_FIXED_ANT   |       \
109 				 WMI_VHT_CAP_TX_FIXED_ANT)
110 
111 /* FIXME: should these be in ieee80211.h? */
112 #define IEEE80211_VHT_MCS_SUPPORT_0_11_MASK	GENMASK(23, 16)
113 #define IEEE80211_DISABLE_VHT_MCS_SUPPORT_0_11	BIT(24)
114 
115 #define WMI_MAX_SPATIAL_STREAM			3
116 
117 #define ATH11K_CHAN_WIDTH_NUM			8
118 
119 extern const struct htt_rx_ring_tlv_filter ath11k_mac_mon_status_filter_default;
120 
121 void ath11k_mac_destroy(struct ath11k_base *ab);
122 void ath11k_mac_unregister(struct ath11k_base *ab);
123 int ath11k_mac_register(struct ath11k_base *ab);
124 int ath11k_mac_allocate(struct ath11k_base *ab);
125 int ath11k_mac_hw_ratecode_to_legacy_rate(u8 hw_rc, u8 preamble, u8 *rateidx,
126 					  u16 *rate);
127 u8 ath11k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
128 			     u32 bitrate);
129 u8 ath11k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband,
130 			     u8 hw_rate, bool cck);
131 
132 void __ath11k_mac_scan_finish(struct ath11k *ar);
133 void ath11k_mac_scan_finish(struct ath11k *ar);
134 
135 struct ath11k_vif *ath11k_mac_get_arvif(struct ath11k *ar, u32 vdev_id);
136 struct ath11k_vif *ath11k_mac_get_arvif_by_vdev_id(struct ath11k_base *ab,
137 						   u32 vdev_id);
138 struct ath11k *ath11k_mac_get_ar_by_vdev_id(struct ath11k_base *ab, u32 vdev_id);
139 struct ath11k *ath11k_mac_get_ar_by_pdev_id(struct ath11k_base *ab, u32 pdev_id);
140 struct ath11k *ath11k_mac_get_ar_vdev_stop_status(struct ath11k_base *ab,
141 						  u32 vdev_id);
142 
143 void ath11k_mac_drain_tx(struct ath11k *ar);
144 void ath11k_mac_peer_cleanup_all(struct ath11k *ar);
145 int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx);
146 u8 ath11k_mac_bw_to_mac80211_bw(u8 bw);
147 #endif
148