1 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
2 /*
3  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
4  */
5 #include "core.h"
6 
7 #ifndef ATH11K_HAL_DESC_H
8 #define ATH11K_HAL_DESC_H
9 
10 #define BUFFER_ADDR_INFO0_ADDR         GENMASK(31, 0)
11 
12 #define BUFFER_ADDR_INFO1_ADDR         GENMASK(7, 0)
13 #define BUFFER_ADDR_INFO1_RET_BUF_MGR  GENMASK(10, 8)
14 #define BUFFER_ADDR_INFO1_SW_COOKIE    GENMASK(31, 11)
15 
16 struct ath11k_buffer_addr {
17 	u32 info0;
18 	u32 info1;
19 } __packed;
20 
21 /* ath11k_buffer_addr
22  *
23  * info0
24  *		Address (lower 32 bits) of the msdu buffer or msdu extension
25  *		descriptor or Link descriptor
26  *
27  * addr
28  *		Address (upper 8 bits) of the msdu buffer or msdu extension
29  *		descriptor or Link descriptor
30  *
31  * return_buffer_manager (RBM)
32  *		Consumer: WBM
33  *		Producer: SW/FW
34  *		Indicates to which buffer manager the buffer or MSDU_EXTENSION
35  *		descriptor or link descriptor that is being pointed to shall be
36  *		returned after the frame has been processed. It is used by WBM
37  *		for routing purposes.
38  *
39  *		Values are defined in enum %HAL_RX_BUF_RBM_
40  *
41  * sw_buffer_cookie
42  *		Cookie field exclusively used by SW. HW ignores the contents,
43  *		accept that it passes the programmed value on to other
44  *		descriptors together with the physical address.
45  *
46  *		Field can be used by SW to for example associate the buffers
47  *		physical address with the virtual address.
48  */
49 
50 enum hal_tlv_tag {
51 	HAL_MACTX_CBF_START                    =   0 /* 0x0 */,
52 	HAL_PHYRX_DATA                         =   1 /* 0x1 */,
53 	HAL_PHYRX_CBF_DATA_RESP                =   2 /* 0x2 */,
54 	HAL_PHYRX_ABORT_REQUEST                =   3 /* 0x3 */,
55 	HAL_PHYRX_USER_ABORT_NOTIFICATION      =   4 /* 0x4 */,
56 	HAL_MACTX_DATA_RESP                    =   5 /* 0x5 */,
57 	HAL_MACTX_CBF_DATA                     =   6 /* 0x6 */,
58 	HAL_MACTX_CBF_DONE                     =   7 /* 0x7 */,
59 	HAL_MACRX_CBF_READ_REQUEST             =   8 /* 0x8 */,
60 	HAL_MACRX_CBF_DATA_REQUEST             =   9 /* 0x9 */,
61 	HAL_MACRX_EXPECT_NDP_RECEPTION         =  10 /* 0xa */,
62 	HAL_MACRX_FREEZE_CAPTURE_CHANNEL       =  11 /* 0xb */,
63 	HAL_MACRX_NDP_TIMEOUT                  =  12 /* 0xc */,
64 	HAL_MACRX_ABORT_ACK                    =  13 /* 0xd */,
65 	HAL_MACRX_REQ_IMPLICIT_FB              =  14 /* 0xe */,
66 	HAL_MACRX_CHAIN_MASK                   =  15 /* 0xf */,
67 	HAL_MACRX_NAP_USER                     =  16 /* 0x10 */,
68 	HAL_MACRX_ABORT_REQUEST                =  17 /* 0x11 */,
69 	HAL_PHYTX_OTHER_TRANSMIT_INFO16        =  18 /* 0x12 */,
70 	HAL_PHYTX_ABORT_ACK                    =  19 /* 0x13 */,
71 	HAL_PHYTX_ABORT_REQUEST                =  20 /* 0x14 */,
72 	HAL_PHYTX_PKT_END                      =  21 /* 0x15 */,
73 	HAL_PHYTX_PPDU_HEADER_INFO_REQUEST     =  22 /* 0x16 */,
74 	HAL_PHYTX_REQUEST_CTRL_INFO            =  23 /* 0x17 */,
75 	HAL_PHYTX_DATA_REQUEST                 =  24 /* 0x18 */,
76 	HAL_PHYTX_BF_CV_LOADING_DONE           =  25 /* 0x19 */,
77 	HAL_PHYTX_NAP_ACK                      =  26 /* 0x1a */,
78 	HAL_PHYTX_NAP_DONE                     =  27 /* 0x1b */,
79 	HAL_PHYTX_OFF_ACK                      =  28 /* 0x1c */,
80 	HAL_PHYTX_ON_ACK                       =  29 /* 0x1d */,
81 	HAL_PHYTX_SYNTH_OFF_ACK                =  30 /* 0x1e */,
82 	HAL_PHYTX_DEBUG16                      =  31 /* 0x1f */,
83 	HAL_MACTX_ABORT_REQUEST                =  32 /* 0x20 */,
84 	HAL_MACTX_ABORT_ACK                    =  33 /* 0x21 */,
85 	HAL_MACTX_PKT_END                      =  34 /* 0x22 */,
86 	HAL_MACTX_PRE_PHY_DESC                 =  35 /* 0x23 */,
87 	HAL_MACTX_BF_PARAMS_COMMON             =  36 /* 0x24 */,
88 	HAL_MACTX_BF_PARAMS_PER_USER           =  37 /* 0x25 */,
89 	HAL_MACTX_PREFETCH_CV                  =  38 /* 0x26 */,
90 	HAL_MACTX_USER_DESC_COMMON             =  39 /* 0x27 */,
91 	HAL_MACTX_USER_DESC_PER_USER           =  40 /* 0x28 */,
92 	HAL_EXAMPLE_USER_TLV_16                =  41 /* 0x29 */,
93 	HAL_EXAMPLE_TLV_16                     =  42 /* 0x2a */,
94 	HAL_MACTX_PHY_OFF                      =  43 /* 0x2b */,
95 	HAL_MACTX_PHY_ON                       =  44 /* 0x2c */,
96 	HAL_MACTX_SYNTH_OFF                    =  45 /* 0x2d */,
97 	HAL_MACTX_EXPECT_CBF_COMMON            =  46 /* 0x2e */,
98 	HAL_MACTX_EXPECT_CBF_PER_USER          =  47 /* 0x2f */,
99 	HAL_MACTX_PHY_DESC                     =  48 /* 0x30 */,
100 	HAL_MACTX_L_SIG_A                      =  49 /* 0x31 */,
101 	HAL_MACTX_L_SIG_B                      =  50 /* 0x32 */,
102 	HAL_MACTX_HT_SIG                       =  51 /* 0x33 */,
103 	HAL_MACTX_VHT_SIG_A                    =  52 /* 0x34 */,
104 	HAL_MACTX_VHT_SIG_B_SU20               =  53 /* 0x35 */,
105 	HAL_MACTX_VHT_SIG_B_SU40               =  54 /* 0x36 */,
106 	HAL_MACTX_VHT_SIG_B_SU80               =  55 /* 0x37 */,
107 	HAL_MACTX_VHT_SIG_B_SU160              =  56 /* 0x38 */,
108 	HAL_MACTX_VHT_SIG_B_MU20               =  57 /* 0x39 */,
109 	HAL_MACTX_VHT_SIG_B_MU40               =  58 /* 0x3a */,
110 	HAL_MACTX_VHT_SIG_B_MU80               =  59 /* 0x3b */,
111 	HAL_MACTX_VHT_SIG_B_MU160              =  60 /* 0x3c */,
112 	HAL_MACTX_SERVICE                      =  61 /* 0x3d */,
113 	HAL_MACTX_HE_SIG_A_SU                  =  62 /* 0x3e */,
114 	HAL_MACTX_HE_SIG_A_MU_DL               =  63 /* 0x3f */,
115 	HAL_MACTX_HE_SIG_A_MU_UL               =  64 /* 0x40 */,
116 	HAL_MACTX_HE_SIG_B1_MU                 =  65 /* 0x41 */,
117 	HAL_MACTX_HE_SIG_B2_MU                 =  66 /* 0x42 */,
118 	HAL_MACTX_HE_SIG_B2_OFDMA              =  67 /* 0x43 */,
119 	HAL_MACTX_DELETE_CV                    =  68 /* 0x44 */,
120 	HAL_MACTX_MU_UPLINK_COMMON             =  69 /* 0x45 */,
121 	HAL_MACTX_MU_UPLINK_USER_SETUP         =  70 /* 0x46 */,
122 	HAL_MACTX_OTHER_TRANSMIT_INFO          =  71 /* 0x47 */,
123 	HAL_MACTX_PHY_NAP                      =  72 /* 0x48 */,
124 	HAL_MACTX_DEBUG                        =  73 /* 0x49 */,
125 	HAL_PHYRX_ABORT_ACK                    =  74 /* 0x4a */,
126 	HAL_PHYRX_GENERATED_CBF_DETAILS        =  75 /* 0x4b */,
127 	HAL_PHYRX_RSSI_LEGACY                  =  76 /* 0x4c */,
128 	HAL_PHYRX_RSSI_HT                      =  77 /* 0x4d */,
129 	HAL_PHYRX_USER_INFO                    =  78 /* 0x4e */,
130 	HAL_PHYRX_PKT_END                      =  79 /* 0x4f */,
131 	HAL_PHYRX_DEBUG                        =  80 /* 0x50 */,
132 	HAL_PHYRX_CBF_TRANSFER_DONE            =  81 /* 0x51 */,
133 	HAL_PHYRX_CBF_TRANSFER_ABORT           =  82 /* 0x52 */,
134 	HAL_PHYRX_L_SIG_A                      =  83 /* 0x53 */,
135 	HAL_PHYRX_L_SIG_B                      =  84 /* 0x54 */,
136 	HAL_PHYRX_HT_SIG                       =  85 /* 0x55 */,
137 	HAL_PHYRX_VHT_SIG_A                    =  86 /* 0x56 */,
138 	HAL_PHYRX_VHT_SIG_B_SU20               =  87 /* 0x57 */,
139 	HAL_PHYRX_VHT_SIG_B_SU40               =  88 /* 0x58 */,
140 	HAL_PHYRX_VHT_SIG_B_SU80               =  89 /* 0x59 */,
141 	HAL_PHYRX_VHT_SIG_B_SU160              =  90 /* 0x5a */,
142 	HAL_PHYRX_VHT_SIG_B_MU20               =  91 /* 0x5b */,
143 	HAL_PHYRX_VHT_SIG_B_MU40               =  92 /* 0x5c */,
144 	HAL_PHYRX_VHT_SIG_B_MU80               =  93 /* 0x5d */,
145 	HAL_PHYRX_VHT_SIG_B_MU160              =  94 /* 0x5e */,
146 	HAL_PHYRX_HE_SIG_A_SU                  =  95 /* 0x5f */,
147 	HAL_PHYRX_HE_SIG_A_MU_DL               =  96 /* 0x60 */,
148 	HAL_PHYRX_HE_SIG_A_MU_UL               =  97 /* 0x61 */,
149 	HAL_PHYRX_HE_SIG_B1_MU                 =  98 /* 0x62 */,
150 	HAL_PHYRX_HE_SIG_B2_MU                 =  99 /* 0x63 */,
151 	HAL_PHYRX_HE_SIG_B2_OFDMA              = 100 /* 0x64 */,
152 	HAL_PHYRX_OTHER_RECEIVE_INFO           = 101 /* 0x65 */,
153 	HAL_PHYRX_COMMON_USER_INFO             = 102 /* 0x66 */,
154 	HAL_PHYRX_DATA_DONE                    = 103 /* 0x67 */,
155 	HAL_RECEIVE_RSSI_INFO                  = 104 /* 0x68 */,
156 	HAL_RECEIVE_USER_INFO                  = 105 /* 0x69 */,
157 	HAL_MIMO_CONTROL_INFO                  = 106 /* 0x6a */,
158 	HAL_RX_LOCATION_INFO                   = 107 /* 0x6b */,
159 	HAL_COEX_TX_REQ                        = 108 /* 0x6c */,
160 	HAL_DUMMY                              = 109 /* 0x6d */,
161 	HAL_RX_TIMING_OFFSET_INFO              = 110 /* 0x6e */,
162 	HAL_EXAMPLE_TLV_32_NAME                = 111 /* 0x6f */,
163 	HAL_MPDU_LIMIT                         = 112 /* 0x70 */,
164 	HAL_NA_LENGTH_END                      = 113 /* 0x71 */,
165 	HAL_OLE_BUF_STATUS                     = 114 /* 0x72 */,
166 	HAL_PCU_PPDU_SETUP_DONE                = 115 /* 0x73 */,
167 	HAL_PCU_PPDU_SETUP_END                 = 116 /* 0x74 */,
168 	HAL_PCU_PPDU_SETUP_INIT                = 117 /* 0x75 */,
169 	HAL_PCU_PPDU_SETUP_START               = 118 /* 0x76 */,
170 	HAL_PDG_FES_SETUP                      = 119 /* 0x77 */,
171 	HAL_PDG_RESPONSE                       = 120 /* 0x78 */,
172 	HAL_PDG_TX_REQ                         = 121 /* 0x79 */,
173 	HAL_SCH_WAIT_INSTR                     = 122 /* 0x7a */,
174 	HAL_SCHEDULER_TLV                      = 123 /* 0x7b */,
175 	HAL_TQM_FLOW_EMPTY_STATUS              = 124 /* 0x7c */,
176 	HAL_TQM_FLOW_NOT_EMPTY_STATUS          = 125 /* 0x7d */,
177 	HAL_TQM_GEN_MPDU_LENGTH_LIST           = 126 /* 0x7e */,
178 	HAL_TQM_GEN_MPDU_LENGTH_LIST_STATUS    = 127 /* 0x7f */,
179 	HAL_TQM_GEN_MPDUS                      = 128 /* 0x80 */,
180 	HAL_TQM_GEN_MPDUS_STATUS               = 129 /* 0x81 */,
181 	HAL_TQM_REMOVE_MPDU                    = 130 /* 0x82 */,
182 	HAL_TQM_REMOVE_MPDU_STATUS             = 131 /* 0x83 */,
183 	HAL_TQM_REMOVE_MSDU                    = 132 /* 0x84 */,
184 	HAL_TQM_REMOVE_MSDU_STATUS             = 133 /* 0x85 */,
185 	HAL_TQM_UPDATE_TX_MPDU_COUNT           = 134 /* 0x86 */,
186 	HAL_TQM_WRITE_CMD                      = 135 /* 0x87 */,
187 	HAL_OFDMA_TRIGGER_DETAILS              = 136 /* 0x88 */,
188 	HAL_TX_DATA                            = 137 /* 0x89 */,
189 	HAL_TX_FES_SETUP                       = 138 /* 0x8a */,
190 	HAL_RX_PACKET                          = 139 /* 0x8b */,
191 	HAL_EXPECTED_RESPONSE                  = 140 /* 0x8c */,
192 	HAL_TX_MPDU_END                        = 141 /* 0x8d */,
193 	HAL_TX_MPDU_START                      = 142 /* 0x8e */,
194 	HAL_TX_MSDU_END                        = 143 /* 0x8f */,
195 	HAL_TX_MSDU_START                      = 144 /* 0x90 */,
196 	HAL_TX_SW_MODE_SETUP                   = 145 /* 0x91 */,
197 	HAL_TXPCU_BUFFER_STATUS                = 146 /* 0x92 */,
198 	HAL_TXPCU_USER_BUFFER_STATUS           = 147 /* 0x93 */,
199 	HAL_DATA_TO_TIME_CONFIG                = 148 /* 0x94 */,
200 	HAL_EXAMPLE_USER_TLV_32                = 149 /* 0x95 */,
201 	HAL_MPDU_INFO                          = 150 /* 0x96 */,
202 	HAL_PDG_USER_SETUP                     = 151 /* 0x97 */,
203 	HAL_TX_11AH_SETUP                      = 152 /* 0x98 */,
204 	HAL_REO_UPDATE_RX_REO_QUEUE_STATUS     = 153 /* 0x99 */,
205 	HAL_TX_PEER_ENTRY                      = 154 /* 0x9a */,
206 	HAL_TX_RAW_OR_NATIVE_FRAME_SETUP       = 155 /* 0x9b */,
207 	HAL_EXAMPLE_STRUCT_NAME                = 156 /* 0x9c */,
208 	HAL_PCU_PPDU_SETUP_END_INFO            = 157 /* 0x9d */,
209 	HAL_PPDU_RATE_SETTING                  = 158 /* 0x9e */,
210 	HAL_PROT_RATE_SETTING                  = 159 /* 0x9f */,
211 	HAL_RX_MPDU_DETAILS                    = 160 /* 0xa0 */,
212 	HAL_EXAMPLE_USER_TLV_42                = 161 /* 0xa1 */,
213 	HAL_RX_MSDU_LINK                       = 162 /* 0xa2 */,
214 	HAL_RX_REO_QUEUE                       = 163 /* 0xa3 */,
215 	HAL_ADDR_SEARCH_ENTRY                  = 164 /* 0xa4 */,
216 	HAL_SCHEDULER_CMD                      = 165 /* 0xa5 */,
217 	HAL_TX_FLUSH                           = 166 /* 0xa6 */,
218 	HAL_TQM_ENTRANCE_RING                  = 167 /* 0xa7 */,
219 	HAL_TX_DATA_WORD                       = 168 /* 0xa8 */,
220 	HAL_TX_MPDU_DETAILS                    = 169 /* 0xa9 */,
221 	HAL_TX_MPDU_LINK                       = 170 /* 0xaa */,
222 	HAL_TX_MPDU_LINK_PTR                   = 171 /* 0xab */,
223 	HAL_TX_MPDU_QUEUE_HEAD                 = 172 /* 0xac */,
224 	HAL_TX_MPDU_QUEUE_EXT                  = 173 /* 0xad */,
225 	HAL_TX_MPDU_QUEUE_EXT_PTR              = 174 /* 0xae */,
226 	HAL_TX_MSDU_DETAILS                    = 175 /* 0xaf */,
227 	HAL_TX_MSDU_EXTENSION                  = 176 /* 0xb0 */,
228 	HAL_TX_MSDU_FLOW                       = 177 /* 0xb1 */,
229 	HAL_TX_MSDU_LINK                       = 178 /* 0xb2 */,
230 	HAL_TX_MSDU_LINK_ENTRY_PTR             = 179 /* 0xb3 */,
231 	HAL_RESPONSE_RATE_SETTING              = 180 /* 0xb4 */,
232 	HAL_TXPCU_BUFFER_BASICS                = 181 /* 0xb5 */,
233 	HAL_UNIFORM_DESCRIPTOR_HEADER          = 182 /* 0xb6 */,
234 	HAL_UNIFORM_TQM_CMD_HEADER             = 183 /* 0xb7 */,
235 	HAL_UNIFORM_TQM_STATUS_HEADER          = 184 /* 0xb8 */,
236 	HAL_USER_RATE_SETTING                  = 185 /* 0xb9 */,
237 	HAL_WBM_BUFFER_RING                    = 186 /* 0xba */,
238 	HAL_WBM_LINK_DESCRIPTOR_RING           = 187 /* 0xbb */,
239 	HAL_WBM_RELEASE_RING                   = 188 /* 0xbc */,
240 	HAL_TX_FLUSH_REQ                       = 189 /* 0xbd */,
241 	HAL_RX_MSDU_DETAILS                    = 190 /* 0xbe */,
242 	HAL_TQM_WRITE_CMD_STATUS               = 191 /* 0xbf */,
243 	HAL_TQM_GET_MPDU_QUEUE_STATS           = 192 /* 0xc0 */,
244 	HAL_TQM_GET_MSDU_FLOW_STATS            = 193 /* 0xc1 */,
245 	HAL_EXAMPLE_USER_CTLV_32               = 194 /* 0xc2 */,
246 	HAL_TX_FES_STATUS_START                = 195 /* 0xc3 */,
247 	HAL_TX_FES_STATUS_USER_PPDU            = 196 /* 0xc4 */,
248 	HAL_TX_FES_STATUS_USER_RESPONSE        = 197 /* 0xc5 */,
249 	HAL_TX_FES_STATUS_END                  = 198 /* 0xc6 */,
250 	HAL_RX_TRIG_INFO                       = 199 /* 0xc7 */,
251 	HAL_RXPCU_TX_SETUP_CLEAR               = 200 /* 0xc8 */,
252 	HAL_RX_FRAME_BITMAP_REQ                = 201 /* 0xc9 */,
253 	HAL_RX_FRAME_BITMAP_ACK                = 202 /* 0xca */,
254 	HAL_COEX_RX_STATUS                     = 203 /* 0xcb */,
255 	HAL_RX_START_PARAM                     = 204 /* 0xcc */,
256 	HAL_RX_PPDU_START                      = 205 /* 0xcd */,
257 	HAL_RX_PPDU_END                        = 206 /* 0xce */,
258 	HAL_RX_MPDU_START                      = 207 /* 0xcf */,
259 	HAL_RX_MPDU_END                        = 208 /* 0xd0 */,
260 	HAL_RX_MSDU_START                      = 209 /* 0xd1 */,
261 	HAL_RX_MSDU_END                        = 210 /* 0xd2 */,
262 	HAL_RX_ATTENTION                       = 211 /* 0xd3 */,
263 	HAL_RECEIVED_RESPONSE_INFO             = 212 /* 0xd4 */,
264 	HAL_RX_PHY_SLEEP                       = 213 /* 0xd5 */,
265 	HAL_RX_HEADER                          = 214 /* 0xd6 */,
266 	HAL_RX_PEER_ENTRY                      = 215 /* 0xd7 */,
267 	HAL_RX_FLUSH                           = 216 /* 0xd8 */,
268 	HAL_RX_RESPONSE_REQUIRED_INFO          = 217 /* 0xd9 */,
269 	HAL_RX_FRAMELESS_BAR_DETAILS           = 218 /* 0xda */,
270 	HAL_TQM_GET_MPDU_QUEUE_STATS_STATUS    = 219 /* 0xdb */,
271 	HAL_TQM_GET_MSDU_FLOW_STATS_STATUS     = 220 /* 0xdc */,
272 	HAL_TX_CBF_INFO                        = 221 /* 0xdd */,
273 	HAL_PCU_PPDU_SETUP_USER                = 222 /* 0xde */,
274 	HAL_RX_MPDU_PCU_START                  = 223 /* 0xdf */,
275 	HAL_RX_PM_INFO                         = 224 /* 0xe0 */,
276 	HAL_RX_USER_PPDU_END                   = 225 /* 0xe1 */,
277 	HAL_RX_PRE_PPDU_START                  = 226 /* 0xe2 */,
278 	HAL_RX_PREAMBLE                        = 227 /* 0xe3 */,
279 	HAL_TX_FES_SETUP_COMPLETE              = 228 /* 0xe4 */,
280 	HAL_TX_LAST_MPDU_FETCHED               = 229 /* 0xe5 */,
281 	HAL_TXDMA_STOP_REQUEST                 = 230 /* 0xe6 */,
282 	HAL_RXPCU_SETUP                        = 231 /* 0xe7 */,
283 	HAL_RXPCU_USER_SETUP                   = 232 /* 0xe8 */,
284 	HAL_TX_FES_STATUS_ACK_OR_BA            = 233 /* 0xe9 */,
285 	HAL_TQM_ACKED_MPDU                     = 234 /* 0xea */,
286 	HAL_COEX_TX_RESP                       = 235 /* 0xeb */,
287 	HAL_COEX_TX_STATUS                     = 236 /* 0xec */,
288 	HAL_MACTX_COEX_PHY_CTRL                = 237 /* 0xed */,
289 	HAL_COEX_STATUS_BROADCAST              = 238 /* 0xee */,
290 	HAL_RESPONSE_START_STATUS              = 239 /* 0xef */,
291 	HAL_RESPONSE_END_STATUS                = 240 /* 0xf0 */,
292 	HAL_CRYPTO_STATUS                      = 241 /* 0xf1 */,
293 	HAL_RECEIVED_TRIGGER_INFO              = 242 /* 0xf2 */,
294 	HAL_REO_ENTRANCE_RING                  = 243 /* 0xf3 */,
295 	HAL_RX_MPDU_LINK                       = 244 /* 0xf4 */,
296 	HAL_COEX_TX_STOP_CTRL                  = 245 /* 0xf5 */,
297 	HAL_RX_PPDU_ACK_REPORT                 = 246 /* 0xf6 */,
298 	HAL_RX_PPDU_NO_ACK_REPORT              = 247 /* 0xf7 */,
299 	HAL_SCH_COEX_STATUS                    = 248 /* 0xf8 */,
300 	HAL_SCHEDULER_COMMAND_STATUS           = 249 /* 0xf9 */,
301 	HAL_SCHEDULER_RX_PPDU_NO_RESPONSE_STATUS = 250 /* 0xfa */,
302 	HAL_TX_FES_STATUS_PROT                 = 251 /* 0xfb */,
303 	HAL_TX_FES_STATUS_START_PPDU           = 252 /* 0xfc */,
304 	HAL_TX_FES_STATUS_START_PROT           = 253 /* 0xfd */,
305 	HAL_TXPCU_PHYTX_DEBUG32                = 254 /* 0xfe */,
306 	HAL_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32  = 255 /* 0xff */,
307 	HAL_TX_MPDU_COUNT_TRANSFER_END         = 256 /* 0x100 */,
308 	HAL_WHO_ANCHOR_OFFSET                  = 257 /* 0x101 */,
309 	HAL_WHO_ANCHOR_VALUE                   = 258 /* 0x102 */,
310 	HAL_WHO_CCE_INFO                       = 259 /* 0x103 */,
311 	HAL_WHO_COMMIT                         = 260 /* 0x104 */,
312 	HAL_WHO_COMMIT_DONE                    = 261 /* 0x105 */,
313 	HAL_WHO_FLUSH                          = 262 /* 0x106 */,
314 	HAL_WHO_L2_LLC                         = 263 /* 0x107 */,
315 	HAL_WHO_L2_PAYLOAD                     = 264 /* 0x108 */,
316 	HAL_WHO_L3_CHECKSUM                    = 265 /* 0x109 */,
317 	HAL_WHO_L3_INFO                        = 266 /* 0x10a */,
318 	HAL_WHO_L4_CHECKSUM                    = 267 /* 0x10b */,
319 	HAL_WHO_L4_INFO                        = 268 /* 0x10c */,
320 	HAL_WHO_MSDU                           = 269 /* 0x10d */,
321 	HAL_WHO_MSDU_MISC                      = 270 /* 0x10e */,
322 	HAL_WHO_PACKET_DATA                    = 271 /* 0x10f */,
323 	HAL_WHO_PACKET_HDR                     = 272 /* 0x110 */,
324 	HAL_WHO_PPDU_END                       = 273 /* 0x111 */,
325 	HAL_WHO_PPDU_START                     = 274 /* 0x112 */,
326 	HAL_WHO_TSO                            = 275 /* 0x113 */,
327 	HAL_WHO_WMAC_HEADER_PV0                = 276 /* 0x114 */,
328 	HAL_WHO_WMAC_HEADER_PV1                = 277 /* 0x115 */,
329 	HAL_WHO_WMAC_IV                        = 278 /* 0x116 */,
330 	HAL_MPDU_INFO_END                      = 279 /* 0x117 */,
331 	HAL_MPDU_INFO_BITMAP                   = 280 /* 0x118 */,
332 	HAL_TX_QUEUE_EXTENSION                 = 281 /* 0x119 */,
333 	HAL_RX_PEER_ENTRY_DETAILS              = 282 /* 0x11a */,
334 	HAL_RX_REO_QUEUE_REFERENCE             = 283 /* 0x11b */,
335 	HAL_RX_REO_QUEUE_EXT                   = 284 /* 0x11c */,
336 	HAL_SCHEDULER_SELFGEN_RESPONSE_STATUS  = 285 /* 0x11d */,
337 	HAL_TQM_UPDATE_TX_MPDU_COUNT_STATUS    = 286 /* 0x11e */,
338 	HAL_TQM_ACKED_MPDU_STATUS              = 287 /* 0x11f */,
339 	HAL_TQM_ADD_MSDU_STATUS                = 288 /* 0x120 */,
340 	HAL_RX_MPDU_LINK_PTR                   = 289 /* 0x121 */,
341 	HAL_REO_DESTINATION_RING               = 290 /* 0x122 */,
342 	HAL_TQM_LIST_GEN_DONE                  = 291 /* 0x123 */,
343 	HAL_WHO_TERMINATE                      = 292 /* 0x124 */,
344 	HAL_TX_LAST_MPDU_END                   = 293 /* 0x125 */,
345 	HAL_TX_CV_DATA                         = 294 /* 0x126 */,
346 	HAL_TCL_ENTRANCE_FROM_PPE_RING         = 295 /* 0x127 */,
347 	HAL_PPDU_TX_END                        = 296 /* 0x128 */,
348 	HAL_PROT_TX_END                        = 297 /* 0x129 */,
349 	HAL_PDG_RESPONSE_RATE_SETTING          = 298 /* 0x12a */,
350 	HAL_MPDU_INFO_GLOBAL_END               = 299 /* 0x12b */,
351 	HAL_TQM_SCH_INSTR_GLOBAL_END           = 300 /* 0x12c */,
352 	HAL_RX_PPDU_END_USER_STATS             = 301 /* 0x12d */,
353 	HAL_RX_PPDU_END_USER_STATS_EXT         = 302 /* 0x12e */,
354 	HAL_NO_ACK_REPORT                      = 303 /* 0x12f */,
355 	HAL_ACK_REPORT                         = 304 /* 0x130 */,
356 	HAL_UNIFORM_REO_CMD_HEADER             = 305 /* 0x131 */,
357 	HAL_REO_GET_QUEUE_STATS                = 306 /* 0x132 */,
358 	HAL_REO_FLUSH_QUEUE                    = 307 /* 0x133 */,
359 	HAL_REO_FLUSH_CACHE                    = 308 /* 0x134 */,
360 	HAL_REO_UNBLOCK_CACHE                  = 309 /* 0x135 */,
361 	HAL_UNIFORM_REO_STATUS_HEADER          = 310 /* 0x136 */,
362 	HAL_REO_GET_QUEUE_STATS_STATUS         = 311 /* 0x137 */,
363 	HAL_REO_FLUSH_QUEUE_STATUS             = 312 /* 0x138 */,
364 	HAL_REO_FLUSH_CACHE_STATUS             = 313 /* 0x139 */,
365 	HAL_REO_UNBLOCK_CACHE_STATUS           = 314 /* 0x13a */,
366 	HAL_TQM_FLUSH_CACHE                    = 315 /* 0x13b */,
367 	HAL_TQM_UNBLOCK_CACHE                  = 316 /* 0x13c */,
368 	HAL_TQM_FLUSH_CACHE_STATUS             = 317 /* 0x13d */,
369 	HAL_TQM_UNBLOCK_CACHE_STATUS           = 318 /* 0x13e */,
370 	HAL_RX_PPDU_END_STATUS_DONE            = 319 /* 0x13f */,
371 	HAL_RX_STATUS_BUFFER_DONE              = 320 /* 0x140 */,
372 	HAL_BUFFER_ADDR_INFO                   = 321 /* 0x141 */,
373 	HAL_RX_MSDU_DESC_INFO                  = 322 /* 0x142 */,
374 	HAL_RX_MPDU_DESC_INFO                  = 323 /* 0x143 */,
375 	HAL_TCL_DATA_CMD                       = 324 /* 0x144 */,
376 	HAL_TCL_GSE_CMD                        = 325 /* 0x145 */,
377 	HAL_TCL_EXIT_BASE                      = 326 /* 0x146 */,
378 	HAL_TCL_COMPACT_EXIT_RING              = 327 /* 0x147 */,
379 	HAL_TCL_REGULAR_EXIT_RING              = 328 /* 0x148 */,
380 	HAL_TCL_EXTENDED_EXIT_RING             = 329 /* 0x149 */,
381 	HAL_UPLINK_COMMON_INFO                 = 330 /* 0x14a */,
382 	HAL_UPLINK_USER_SETUP_INFO             = 331 /* 0x14b */,
383 	HAL_TX_DATA_SYNC                       = 332 /* 0x14c */,
384 	HAL_PHYRX_CBF_READ_REQUEST_ACK         = 333 /* 0x14d */,
385 	HAL_TCL_STATUS_RING                    = 334 /* 0x14e */,
386 	HAL_TQM_GET_MPDU_HEAD_INFO             = 335 /* 0x14f */,
387 	HAL_TQM_SYNC_CMD                       = 336 /* 0x150 */,
388 	HAL_TQM_GET_MPDU_HEAD_INFO_STATUS      = 337 /* 0x151 */,
389 	HAL_TQM_SYNC_CMD_STATUS                = 338 /* 0x152 */,
390 	HAL_TQM_THRESHOLD_DROP_NOTIFICATION_STATUS = 339 /* 0x153 */,
391 	HAL_TQM_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 340 /* 0x154 */,
392 	HAL_REO_FLUSH_TIMEOUT_LIST             = 341 /* 0x155 */,
393 	HAL_REO_FLUSH_TIMEOUT_LIST_STATUS      = 342 /* 0x156 */,
394 	HAL_REO_TO_PPE_RING                    = 343 /* 0x157 */,
395 	HAL_RX_MPDU_INFO                       = 344 /* 0x158 */,
396 	HAL_REO_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 345 /* 0x159 */,
397 	HAL_SCHEDULER_RX_SIFS_RESPONSE_TRIGGER_STATUS = 346 /* 0x15a */,
398 	HAL_EXAMPLE_USER_TLV_32_NAME           = 347 /* 0x15b */,
399 	HAL_RX_PPDU_START_USER_INFO            = 348 /* 0x15c */,
400 	HAL_RX_RXPCU_CLASSIFICATION_OVERVIEW   = 349 /* 0x15d */,
401 	HAL_RX_RING_MASK                       = 350 /* 0x15e */,
402 	HAL_WHO_CLASSIFY_INFO                  = 351 /* 0x15f */,
403 	HAL_TXPT_CLASSIFY_INFO                 = 352 /* 0x160 */,
404 	HAL_RXPT_CLASSIFY_INFO                 = 353 /* 0x161 */,
405 	HAL_TX_FLOW_SEARCH_ENTRY               = 354 /* 0x162 */,
406 	HAL_RX_FLOW_SEARCH_ENTRY               = 355 /* 0x163 */,
407 	HAL_RECEIVED_TRIGGER_INFO_DETAILS      = 356 /* 0x164 */,
408 	HAL_COEX_MAC_NAP                       = 357 /* 0x165 */,
409 	HAL_MACRX_ABORT_REQUEST_INFO           = 358 /* 0x166 */,
410 	HAL_MACTX_ABORT_REQUEST_INFO           = 359 /* 0x167 */,
411 	HAL_PHYRX_ABORT_REQUEST_INFO           = 360 /* 0x168 */,
412 	HAL_PHYTX_ABORT_REQUEST_INFO           = 361 /* 0x169 */,
413 	HAL_RXPCU_PPDU_END_INFO                = 362 /* 0x16a */,
414 	HAL_WHO_MESH_CONTROL                   = 363 /* 0x16b */,
415 	HAL_L_SIG_A_INFO                       = 364 /* 0x16c */,
416 	HAL_L_SIG_B_INFO                       = 365 /* 0x16d */,
417 	HAL_HT_SIG_INFO                        = 366 /* 0x16e */,
418 	HAL_VHT_SIG_A_INFO                     = 367 /* 0x16f */,
419 	HAL_VHT_SIG_B_SU20_INFO                = 368 /* 0x170 */,
420 	HAL_VHT_SIG_B_SU40_INFO                = 369 /* 0x171 */,
421 	HAL_VHT_SIG_B_SU80_INFO                = 370 /* 0x172 */,
422 	HAL_VHT_SIG_B_SU160_INFO               = 371 /* 0x173 */,
423 	HAL_VHT_SIG_B_MU20_INFO                = 372 /* 0x174 */,
424 	HAL_VHT_SIG_B_MU40_INFO                = 373 /* 0x175 */,
425 	HAL_VHT_SIG_B_MU80_INFO                = 374 /* 0x176 */,
426 	HAL_VHT_SIG_B_MU160_INFO               = 375 /* 0x177 */,
427 	HAL_SERVICE_INFO                       = 376 /* 0x178 */,
428 	HAL_HE_SIG_A_SU_INFO                   = 377 /* 0x179 */,
429 	HAL_HE_SIG_A_MU_DL_INFO                = 378 /* 0x17a */,
430 	HAL_HE_SIG_A_MU_UL_INFO                = 379 /* 0x17b */,
431 	HAL_HE_SIG_B1_MU_INFO                  = 380 /* 0x17c */,
432 	HAL_HE_SIG_B2_MU_INFO                  = 381 /* 0x17d */,
433 	HAL_HE_SIG_B2_OFDMA_INFO               = 382 /* 0x17e */,
434 	HAL_PDG_SW_MODE_BW_START               = 383 /* 0x17f */,
435 	HAL_PDG_SW_MODE_BW_END                 = 384 /* 0x180 */,
436 	HAL_PDG_WAIT_FOR_MAC_REQUEST           = 385 /* 0x181 */,
437 	HAL_PDG_WAIT_FOR_PHY_REQUEST           = 386 /* 0x182 */,
438 	HAL_SCHEDULER_END                      = 387 /* 0x183 */,
439 	HAL_PEER_TABLE_ENTRY                   = 388 /* 0x184 */,
440 	HAL_SW_PEER_INFO                       = 389 /* 0x185 */,
441 	HAL_RXOLE_CCE_CLASSIFY_INFO            = 390 /* 0x186 */,
442 	HAL_TCL_CCE_CLASSIFY_INFO              = 391 /* 0x187 */,
443 	HAL_RXOLE_CCE_INFO                     = 392 /* 0x188 */,
444 	HAL_TCL_CCE_INFO                       = 393 /* 0x189 */,
445 	HAL_TCL_CCE_SUPERRULE                  = 394 /* 0x18a */,
446 	HAL_CCE_RULE                           = 395 /* 0x18b */,
447 	HAL_RX_PPDU_START_DROPPED              = 396 /* 0x18c */,
448 	HAL_RX_PPDU_END_DROPPED                = 397 /* 0x18d */,
449 	HAL_RX_PPDU_END_STATUS_DONE_DROPPED    = 398 /* 0x18e */,
450 	HAL_RX_MPDU_START_DROPPED              = 399 /* 0x18f */,
451 	HAL_RX_MSDU_START_DROPPED              = 400 /* 0x190 */,
452 	HAL_RX_MSDU_END_DROPPED                = 401 /* 0x191 */,
453 	HAL_RX_MPDU_END_DROPPED                = 402 /* 0x192 */,
454 	HAL_RX_ATTENTION_DROPPED               = 403 /* 0x193 */,
455 	HAL_TXPCU_USER_SETUP                   = 404 /* 0x194 */,
456 	HAL_RXPCU_USER_SETUP_EXT               = 405 /* 0x195 */,
457 	HAL_CE_SRC_DESC                        = 406 /* 0x196 */,
458 	HAL_CE_STAT_DESC                       = 407 /* 0x197 */,
459 	HAL_RXOLE_CCE_SUPERRULE                = 408 /* 0x198 */,
460 	HAL_TX_RATE_STATS_INFO                 = 409 /* 0x199 */,
461 	HAL_CMD_PART_0_END                     = 410 /* 0x19a */,
462 	HAL_MACTX_SYNTH_ON                     = 411 /* 0x19b */,
463 	HAL_SCH_CRITICAL_TLV_REFERENCE         = 412 /* 0x19c */,
464 	HAL_TQM_MPDU_GLOBAL_START              = 413 /* 0x19d */,
465 	HAL_EXAMPLE_TLV_32                     = 414 /* 0x19e */,
466 	HAL_TQM_UPDATE_TX_MSDU_FLOW            = 415 /* 0x19f */,
467 	HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD      = 416 /* 0x1a0 */,
468 	HAL_TQM_UPDATE_TX_MSDU_FLOW_STATUS     = 417 /* 0x1a1 */,
469 	HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD_STATUS = 418 /* 0x1a2 */,
470 	HAL_REO_UPDATE_RX_REO_QUEUE            = 419 /* 0x1a3 */,
471 	HAL_CE_DST_DESC			       = 420 /* 0x1a4 */,
472 	HAL_TLV_BASE                           = 511 /* 0x1ff */,
473 };
474 
475 #define HAL_TLV_HDR_TAG		GENMASK(9, 1)
476 #define HAL_TLV_HDR_LEN		GENMASK(25, 10)
477 #define HAL_TLV_USR_ID		GENMASK(31, 26)
478 
479 #define HAL_TLV_ALIGN	4
480 
481 struct hal_tlv_hdr {
482 	u32 tl;
483 	u8 value[];
484 } __packed;
485 
486 #define RX_MPDU_DESC_INFO0_MSDU_COUNT		GENMASK(7, 0)
487 #define RX_MPDU_DESC_INFO0_SEQ_NUM		GENMASK(19, 8)
488 #define RX_MPDU_DESC_INFO0_FRAG_FLAG		BIT(20)
489 #define RX_MPDU_DESC_INFO0_MPDU_RETRY		BIT(21)
490 #define RX_MPDU_DESC_INFO0_AMPDU_FLAG		BIT(22)
491 #define RX_MPDU_DESC_INFO0_BAR_FRAME		BIT(23)
492 #define RX_MPDU_DESC_INFO0_VALID_PN		BIT(24)
493 #define RX_MPDU_DESC_INFO0_VALID_SA		BIT(25)
494 #define RX_MPDU_DESC_INFO0_SA_IDX_TIMEOUT	BIT(26)
495 #define RX_MPDU_DESC_INFO0_VALID_DA		BIT(27)
496 #define RX_MPDU_DESC_INFO0_DA_MCBC		BIT(28)
497 #define RX_MPDU_DESC_INFO0_DA_IDX_TIMEOUT	BIT(29)
498 #define RX_MPDU_DESC_INFO0_RAW_MPDU		BIT(30)
499 
500 #define RX_MPDU_DESC_META_DATA_PEER_ID		GENMASK(15, 0)
501 
502 struct rx_mpdu_desc {
503 	u32 info0; /* %RX_MPDU_DESC_INFO */
504 	u32 meta_data;
505 } __packed;
506 
507 /* rx_mpdu_desc
508  *		Producer: RXDMA
509  *		Consumer: REO/SW/FW
510  *
511  * msdu_count
512  *		The number of MSDUs within the MPDU
513  *
514  * mpdu_sequence_number
515  *		The field can have two different meanings based on the setting
516  *		of field 'bar_frame'. If 'bar_frame' is set, it means the MPDU
517  *		start sequence number from the BAR frame otherwise it means
518  *		the MPDU sequence number of the received frame.
519  *
520  * fragment_flag
521  *		When set, this MPDU is a fragment and REO should forward this
522  *		fragment MPDU to the REO destination ring without any reorder
523  *		checks, pn checks or bitmap update. This implies that REO is
524  *		forwarding the pointer to the MSDU link descriptor.
525  *
526  * mpdu_retry_bit
527  *		The retry bit setting from the MPDU header of the received frame
528  *
529  * ampdu_flag
530  *		Indicates the MPDU was received as part of an A-MPDU.
531  *
532  * bar_frame
533  *		Indicates the received frame is a BAR frame. After processing,
534  *		this frame shall be pushed to SW or deleted.
535  *
536  * valid_pn
537  *		When not set, REO will not perform a PN sequence number check.
538  *
539  * valid_sa
540  *		Indicates OLE found a valid SA entry for all MSDUs in this MPDU.
541  *
542  * sa_idx_timeout
543  *		Indicates, at least 1 MSDU within the MPDU has an unsuccessful
544  *		MAC source address search due to the expiration of search timer.
545  *
546  * valid_da
547  *		When set, OLE found a valid DA entry for all MSDUs in this MPDU.
548  *
549  * da_mcbc
550  *		Field Only valid if valid_da is set. Indicates at least one of
551  *		the DA addresses is a Multicast or Broadcast address.
552  *
553  * da_idx_timeout
554  *		Indicates, at least 1 MSDU within the MPDU has an unsuccessful
555  *		MAC destination address search due to the expiration of search
556  *		timer.
557  *
558  * raw_mpdu
559  *		Field only valid when first_msdu_in_mpdu_flag is set. Indicates
560  *		the contents in the MSDU buffer contains a 'RAW' MPDU.
561  */
562 
563 enum hal_rx_msdu_desc_reo_dest_ind {
564 	HAL_RX_MSDU_DESC_REO_DEST_IND_TCL,
565 	HAL_RX_MSDU_DESC_REO_DEST_IND_SW1,
566 	HAL_RX_MSDU_DESC_REO_DEST_IND_SW2,
567 	HAL_RX_MSDU_DESC_REO_DEST_IND_SW3,
568 	HAL_RX_MSDU_DESC_REO_DEST_IND_SW4,
569 	HAL_RX_MSDU_DESC_REO_DEST_IND_RELEASE,
570 	HAL_RX_MSDU_DESC_REO_DEST_IND_FW,
571 };
572 
573 #define RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU	BIT(0)
574 #define RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU	BIT(1)
575 #define RX_MSDU_DESC_INFO0_MSDU_CONTINUATION	BIT(2)
576 #define RX_MSDU_DESC_INFO0_MSDU_LENGTH		GENMASK(16, 3)
577 #define RX_MSDU_DESC_INFO0_REO_DEST_IND		GENMASK(21, 17)
578 #define RX_MSDU_DESC_INFO0_MSDU_DROP		BIT(22)
579 #define RX_MSDU_DESC_INFO0_VALID_SA		BIT(23)
580 #define RX_MSDU_DESC_INFO0_SA_IDX_TIMEOUT	BIT(24)
581 #define RX_MSDU_DESC_INFO0_VALID_DA		BIT(25)
582 #define RX_MSDU_DESC_INFO0_DA_MCBC		BIT(26)
583 #define RX_MSDU_DESC_INFO0_DA_IDX_TIMEOUT	BIT(27)
584 
585 #define HAL_RX_MSDU_PKT_LENGTH_GET(val)		\
586 	(FIELD_GET(RX_MSDU_DESC_INFO0_MSDU_LENGTH, (val)))
587 
588 struct rx_msdu_desc {
589 	u32 info0;
590 	u32 rsvd0;
591 } __packed;
592 
593 /* rx_msdu_desc
594  *
595  * first_msdu_in_mpdu
596  *		Indicates first msdu in mpdu.
597  *
598  * last_msdu_in_mpdu
599  *		Indicates last msdu in mpdu. This flag can be true only when
600  *		'Msdu_continuation' set to 0. This implies that when an msdu
601  *		is spread out over multiple buffers and thus msdu_continuation
602  *		is set, only for the very last buffer of the msdu, can the
603  *		'last_msdu_in_mpdu' be set.
604  *
605  *		When both first_msdu_in_mpdu and last_msdu_in_mpdu are set,
606  *		the MPDU that this MSDU belongs to only contains a single MSDU.
607  *
608  * msdu_continuation
609  *		When set, this MSDU buffer was not able to hold the entire MSDU.
610  *		The next buffer will therefor contain additional information
611  *		related to this MSDU.
612  *
613  * msdu_length
614  *		Field is only valid in combination with the 'first_msdu_in_mpdu'
615  *		being set. Full MSDU length in bytes after decapsulation. This
616  *		field is still valid for MPDU frames without A-MSDU. It still
617  *		represents MSDU length after decapsulation Or in case of RAW
618  *		MPDUs, it indicates the length of the entire MPDU (without FCS
619  *		field).
620  *
621  * reo_destination_indication
622  *		The id of the reo exit ring where the msdu frame shall push
623  *		after (MPDU level) reordering has finished. Values are defined
624  *		in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
625  *
626  * msdu_drop
627  *		Indicates that REO shall drop this MSDU and not forward it to
628  *		any other ring.
629  *
630  * valid_sa
631  *		Indicates OLE found a valid SA entry for this MSDU.
632  *
633  * sa_idx_timeout
634  *		Indicates, an unsuccessful MAC source address search due to
635  *		the expiration of search timer for this MSDU.
636  *
637  * valid_da
638  *		When set, OLE found a valid DA entry for this MSDU.
639  *
640  * da_mcbc
641  *		Field Only valid if valid_da is set. Indicates the DA address
642  *		is a Multicast or Broadcast address for this MSDU.
643  *
644  * da_idx_timeout
645  *		Indicates, an unsuccessful MAC destination address search due
646  *		to the expiration of search timer fot this MSDU.
647  */
648 
649 enum hal_reo_dest_ring_buffer_type {
650 	HAL_REO_DEST_RING_BUFFER_TYPE_MSDU,
651 	HAL_REO_DEST_RING_BUFFER_TYPE_LINK_DESC,
652 };
653 
654 enum hal_reo_dest_ring_push_reason {
655 	HAL_REO_DEST_RING_PUSH_REASON_ERR_DETECTED,
656 	HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION,
657 };
658 
659 enum hal_reo_dest_ring_error_code {
660 	HAL_REO_DEST_RING_ERROR_CODE_DESC_ADDR_ZERO,
661 	HAL_REO_DEST_RING_ERROR_CODE_DESC_INVALID,
662 	HAL_REO_DEST_RING_ERROR_CODE_AMPDU_IN_NON_BA,
663 	HAL_REO_DEST_RING_ERROR_CODE_NON_BA_DUPLICATE,
664 	HAL_REO_DEST_RING_ERROR_CODE_BA_DUPLICATE,
665 	HAL_REO_DEST_RING_ERROR_CODE_FRAME_2K_JUMP,
666 	HAL_REO_DEST_RING_ERROR_CODE_BAR_2K_JUMP,
667 	HAL_REO_DEST_RING_ERROR_CODE_FRAME_OOR,
668 	HAL_REO_DEST_RING_ERROR_CODE_BAR_OOR,
669 	HAL_REO_DEST_RING_ERROR_CODE_NO_BA_SESSION,
670 	HAL_REO_DEST_RING_ERROR_CODE_FRAME_SN_EQUALS_SSN,
671 	HAL_REO_DEST_RING_ERROR_CODE_PN_CHECK_FAILED,
672 	HAL_REO_DEST_RING_ERROR_CODE_2K_ERR_FLAG_SET,
673 	HAL_REO_DEST_RING_ERROR_CODE_PN_ERR_FLAG_SET,
674 	HAL_REO_DEST_RING_ERROR_CODE_DESC_BLOCKED,
675 	HAL_REO_DEST_RING_ERROR_CODE_MAX,
676 };
677 
678 #define HAL_REO_DEST_RING_INFO0_QUEUE_ADDR_HI		GENMASK(7, 0)
679 #define HAL_REO_DEST_RING_INFO0_BUFFER_TYPE		BIT(8)
680 #define HAL_REO_DEST_RING_INFO0_PUSH_REASON		GENMASK(10, 9)
681 #define HAL_REO_DEST_RING_INFO0_ERROR_CODE		GENMASK(15, 11)
682 #define HAL_REO_DEST_RING_INFO0_RX_QUEUE_NUM		GENMASK(31, 16)
683 
684 #define HAL_REO_DEST_RING_INFO1_REORDER_INFO_VALID	BIT(0)
685 #define HAL_REO_DEST_RING_INFO1_REORDER_OPCODE		GENMASK(4, 1)
686 #define HAL_REO_DEST_RING_INFO1_REORDER_SLOT_IDX	GENMASK(12, 5)
687 
688 #define HAL_REO_DEST_RING_INFO2_RING_ID			GENMASK(27, 20)
689 #define HAL_REO_DEST_RING_INFO2_LOOPING_COUNT		GENMASK(31, 28)
690 
691 struct hal_reo_dest_ring {
692 	struct ath11k_buffer_addr buf_addr_info;
693 	struct rx_mpdu_desc rx_mpdu_info;
694 	struct rx_msdu_desc rx_msdu_info;
695 	u32 queue_addr_lo;
696 	u32 info0; /* %HAL_REO_DEST_RING_INFO0_ */
697 	u32 info1; /* %HAL_REO_DEST_RING_INFO1_ */
698 	u32 rsvd0;
699 	u32 rsvd1;
700 	u32 rsvd2;
701 	u32 rsvd3;
702 	u32 rsvd4;
703 	u32 rsvd5;
704 	u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */
705 } __packed;
706 
707 /* hal_reo_dest_ring
708  *
709  *		Producer: RXDMA
710  *		Consumer: REO/SW/FW
711  *
712  * buf_addr_info
713  *		Details of the physical address of a buffer or MSDU
714  *		link descriptor.
715  *
716  * rx_mpdu_info
717  *		General information related to the MPDU that is passed
718  *		on from REO entrance ring to the REO destination ring.
719  *
720  * rx_msdu_info
721  *		General information related to the MSDU that is passed
722  *		on from RXDMA all the way to the REO destination ring.
723  *
724  * queue_addr_lo
725  *		Address (lower 32 bits) of the REO queue descriptor.
726  *
727  * queue_addr_hi
728  *		Address (upper 8 bits) of the REO queue descriptor.
729  *
730  * buffer_type
731  *		Indicates the type of address provided in the buf_addr_info.
732  *		Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_.
733  *
734  * push_reason
735  *		Reason for pushing this frame to this exit ring. Values are
736  *		defined in enum %HAL_REO_DEST_RING_PUSH_REASON_.
737  *
738  * error_code
739  *		Valid only when 'push_reason' is set. All error codes are
740  *		defined in enum %HAL_REO_DEST_RING_ERROR_CODE_.
741  *
742  * rx_queue_num
743  *		Indicates the REO MPDU reorder queue id from which this frame
744  *		originated.
745  *
746  * reorder_info_valid
747  *		When set, REO has been instructed to not perform the actual
748  *		re-ordering of frames for this queue, but just to insert
749  *		the reorder opcodes.
750  *
751  * reorder_opcode
752  *		Field is valid when 'reorder_info_valid' is set. This field is
753  *		always valid for debug purpose as well.
754  *
755  * reorder_slot_idx
756  *		Valid only when 'reorder_info_valid' is set.
757  *
758  * ring_id
759  *		The buffer pointer ring id.
760  *		0 - Idle ring
761  *		1 - N refers to other rings.
762  *
763  * looping_count
764  *		Indicates the number of times the producer of entries into
765  *		this ring has looped around the ring.
766  */
767 
768 enum hal_reo_entr_rxdma_ecode {
769 	HAL_REO_ENTR_RING_RXDMA_ECODE_OVERFLOW_ERR,
770 	HAL_REO_ENTR_RING_RXDMA_ECODE_MPDU_LEN_ERR,
771 	HAL_REO_ENTR_RING_RXDMA_ECODE_FCS_ERR,
772 	HAL_REO_ENTR_RING_RXDMA_ECODE_DECRYPT_ERR,
773 	HAL_REO_ENTR_RING_RXDMA_ECODE_TKIP_MIC_ERR,
774 	HAL_REO_ENTR_RING_RXDMA_ECODE_UNECRYPTED_ERR,
775 	HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LEN_ERR,
776 	HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LIMIT_ERR,
777 	HAL_REO_ENTR_RING_RXDMA_ECODE_WIFI_PARSE_ERR,
778 	HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_PARSE_ERR,
779 	HAL_REO_ENTR_RING_RXDMA_ECODE_SA_TIMEOUT_ERR,
780 	HAL_REO_ENTR_RING_RXDMA_ECODE_DA_TIMEOUT_ERR,
781 	HAL_REO_ENTR_RING_RXDMA_ECODE_FLOW_TIMEOUT_ERR,
782 	HAL_REO_ENTR_RING_RXDMA_ECODE_FLUSH_REQUEST_ERR,
783 	HAL_REO_ENTR_RING_RXDMA_ECODE_MAX,
784 };
785 
786 #define HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI		GENMASK(7, 0)
787 #define HAL_REO_ENTR_RING_INFO0_MPDU_BYTE_COUNT		GENMASK(21, 8)
788 #define HAL_REO_ENTR_RING_INFO0_DEST_IND		GENMASK(26, 22)
789 #define HAL_REO_ENTR_RING_INFO0_FRAMELESS_BAR		BIT(27)
790 
791 #define HAL_REO_ENTR_RING_INFO1_RXDMA_PUSH_REASON	GENMASK(1, 0)
792 #define HAL_REO_ENTR_RING_INFO1_RXDMA_ERROR_CODE	GENMASK(6, 2)
793 
794 struct hal_reo_entrance_ring {
795 	struct ath11k_buffer_addr buf_addr_info;
796 	struct rx_mpdu_desc rx_mpdu_info;
797 	u32 queue_addr_lo;
798 	u32 info0; /* %HAL_REO_ENTR_RING_INFO0_ */
799 	u32 info1; /* %HAL_REO_ENTR_RING_INFO1_ */
800 	u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */
801 
802 } __packed;
803 
804 /* hal_reo_entrance_ring
805  *
806  *		Producer: RXDMA
807  *		Consumer: REO
808  *
809  * buf_addr_info
810  *		Details of the physical address of a buffer or MSDU
811  *		link descriptor.
812  *
813  * rx_mpdu_info
814  *		General information related to the MPDU that is passed
815  *		on from REO entrance ring to the REO destination ring.
816  *
817  * queue_addr_lo
818  *		Address (lower 32 bits) of the REO queue descriptor.
819  *
820  * queue_addr_hi
821  *		Address (upper 8 bits) of the REO queue descriptor.
822  *
823  * mpdu_byte_count
824  *		An approximation of the number of bytes received in this MPDU.
825  *		Used to keeps stats on the amount of data flowing
826  *		through a queue.
827  *
828  * reo_destination_indication
829  *		The id of the reo exit ring where the msdu frame shall push
830  *		after (MPDU level) reordering has finished. Values are defined
831  *		in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
832  *
833  * frameless_bar
834  *		Indicates that this REO entrance ring struct contains BAR info
835  *		from a multi TID BAR frame. The original multi TID BAR frame
836  *		itself contained all the REO info for the first TID, but all
837  *		the subsequent TID info and their linkage to the REO descriptors
838  *		is passed down as 'frameless' BAR info.
839  *
840  *		The only fields valid in this descriptor when this bit is set
841  *		are queue_addr_lo, queue_addr_hi, mpdu_sequence_number,
842  *		bar_frame and peer_meta_data.
843  *
844  * rxdma_push_reason
845  *		Reason for pushing this frame to this exit ring. Values are
846  *		defined in enum %HAL_REO_DEST_RING_PUSH_REASON_.
847  *
848  * rxdma_error_code
849  *		Valid only when 'push_reason' is set. All error codes are
850  *		defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_.
851  *
852  * ring_id
853  *		The buffer pointer ring id.
854  *		0 - Idle ring
855  *		1 - N refers to other rings.
856  *
857  * looping_count
858  *		Indicates the number of times the producer of entries into
859  *		this ring has looped around the ring.
860  */
861 
862 #define HAL_SW_MON_RING_INFO0_RXDMA_PUSH_REASON	GENMASK(1, 0)
863 #define HAL_SW_MON_RING_INFO0_RXDMA_ERROR_CODE	GENMASK(6, 2)
864 #define HAL_SW_MON_RING_INFO0_MPDU_FRAG_NUMBER	GENMASK(10, 7)
865 #define HAL_SW_MON_RING_INFO0_FRAMELESS_BAR	BIT(11)
866 #define HAL_SW_MON_RING_INFO0_STATUS_BUF_CNT	GENMASK(15, 12)
867 #define HAL_SW_MON_RING_INFO0_END_OF_PPDU	BIT(16)
868 
869 #define HAL_SW_MON_RING_INFO1_PHY_PPDU_ID	GENMASK(15, 0)
870 #define HAL_SW_MON_RING_INFO1_RING_ID		GENMASK(27, 20)
871 #define HAL_SW_MON_RING_INFO1_LOOPING_COUNT	GENMASK(31, 28)
872 
873 struct hal_sw_monitor_ring {
874 	struct ath11k_buffer_addr buf_addr_info;
875 	struct rx_mpdu_desc rx_mpdu_info;
876 	struct ath11k_buffer_addr status_buf_addr_info;
877 	u32 info0;
878 	u32 info1;
879 } __packed;
880 
881 #define HAL_REO_CMD_HDR_INFO0_CMD_NUMBER	GENMASK(15, 0)
882 #define HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED	BIT(16)
883 
884 struct hal_reo_cmd_hdr {
885 	u32 info0;
886 } __packed;
887 
888 #define HAL_REO_GET_QUEUE_STATS_INFO0_QUEUE_ADDR_HI	GENMASK(7, 0)
889 #define HAL_REO_GET_QUEUE_STATS_INFO0_CLEAR_STATS	BIT(8)
890 
891 struct hal_reo_get_queue_stats {
892 	struct hal_reo_cmd_hdr cmd;
893 	u32 queue_addr_lo;
894 	u32 info0;
895 	u32 rsvd0[6];
896 } __packed;
897 
898 /* hal_reo_get_queue_stats
899  *		Producer: SW
900  *		Consumer: REO
901  *
902  * cmd
903  *		Details for command execution tracking purposes.
904  *
905  * queue_addr_lo
906  *		Address (lower 32 bits) of the REO queue descriptor.
907  *
908  * queue_addr_hi
909  *		Address (upper 8 bits) of the REO queue descriptor.
910  *
911  * clear_stats
912  *		Clear stats settings. When set, Clear the stats after
913  *		generating the status.
914  *
915  *		Following stats will be cleared.
916  *		Timeout_count
917  *		Forward_due_to_bar_count
918  *		Duplicate_count
919  *		Frames_in_order_count
920  *		BAR_received_count
921  *		MPDU_Frames_processed_count
922  *		MSDU_Frames_processed_count
923  *		Total_processed_byte_count
924  *		Late_receive_MPDU_count
925  *		window_jump_2k
926  *		Hole_count
927  */
928 
929 #define HAL_REO_FLUSH_QUEUE_INFO0_DESC_ADDR_HI		GENMASK(7, 0)
930 #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_DESC_ADDR	BIT(8)
931 #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_RESRC_IDX	GENMASK(10, 9)
932 
933 struct hal_reo_flush_queue {
934 	struct hal_reo_cmd_hdr cmd;
935 	u32 desc_addr_lo;
936 	u32 info0;
937 	u32 rsvd0[6];
938 } __packed;
939 
940 #define HAL_REO_FLUSH_CACHE_INFO0_CACHE_ADDR_HI		GENMASK(7, 0)
941 #define HAL_REO_FLUSH_CACHE_INFO0_FWD_ALL_MPDUS		BIT(8)
942 #define HAL_REO_FLUSH_CACHE_INFO0_RELEASE_BLOCK_IDX	BIT(9)
943 #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_RESRC_IDX	GENMASK(11, 10)
944 #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_WO_INVALIDATE	BIT(12)
945 #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_CACHE_USAGE	BIT(13)
946 #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_ALL		BIT(14)
947 
948 struct hal_reo_flush_cache {
949 	struct hal_reo_cmd_hdr cmd;
950 	u32 cache_addr_lo;
951 	u32 info0;
952 	u32 rsvd0[6];
953 } __packed;
954 
955 #define HAL_TCL_DATA_CMD_INFO0_DESC_TYPE	BIT(0)
956 #define HAL_TCL_DATA_CMD_INFO0_EPD		BIT(1)
957 #define HAL_TCL_DATA_CMD_INFO0_ENCAP_TYPE	GENMASK(3, 2)
958 #define HAL_TCL_DATA_CMD_INFO0_ENCRYPT_TYPE	GENMASK(7, 4)
959 #define HAL_TCL_DATA_CMD_INFO0_SRC_BUF_SWAP	BIT(8)
960 #define HAL_TCL_DATA_CMD_INFO0_LNK_META_SWAP	BIT(9)
961 #define HAL_TCL_DATA_CMD_INFO0_SEARCH_TYPE	GENMASK(13, 12)
962 #define HAL_TCL_DATA_CMD_INFO0_ADDR_EN		GENMASK(15, 14)
963 #define HAL_TCL_DATA_CMD_INFO0_CMD_NUM		GENMASK(31, 16)
964 
965 #define HAL_TCL_DATA_CMD_INFO1_DATA_LEN		GENMASK(15, 0)
966 #define HAL_TCL_DATA_CMD_INFO1_IP4_CKSUM_EN	BIT(16)
967 #define HAL_TCL_DATA_CMD_INFO1_UDP4_CKSUM_EN	BIT(17)
968 #define HAL_TCL_DATA_CMD_INFO1_UDP6_CKSUM_EN	BIT(18)
969 #define HAL_TCL_DATA_CMD_INFO1_TCP4_CKSUM_EN	BIT(19)
970 #define HAL_TCL_DATA_CMD_INFO1_TCP6_CKSUM_EN	BIT(20)
971 #define HAL_TCL_DATA_CMD_INFO1_TO_FW		BIT(21)
972 #define HAL_TCL_DATA_CMD_INFO1_PKT_OFFSET	GENMASK(31, 23)
973 
974 #define HAL_TCL_DATA_CMD_INFO2_BUF_TIMESTAMP		GENMASK(18, 0)
975 #define HAL_TCL_DATA_CMD_INFO2_BUF_T_VALID		BIT(19)
976 #define HAL_IPQ8074_TCL_DATA_CMD_INFO2_MESH_ENABLE	BIT(20)
977 #define HAL_TCL_DATA_CMD_INFO2_TID_OVERWRITE		BIT(21)
978 #define HAL_TCL_DATA_CMD_INFO2_TID			GENMASK(25, 22)
979 #define HAL_TCL_DATA_CMD_INFO2_LMAC_ID			GENMASK(27, 26)
980 
981 #define HAL_TCL_DATA_CMD_INFO3_DSCP_TID_TABLE_IDX	GENMASK(5, 0)
982 #define HAL_TCL_DATA_CMD_INFO3_SEARCH_INDEX		GENMASK(25, 6)
983 #define HAL_TCL_DATA_CMD_INFO3_CACHE_SET_NUM		GENMASK(29, 26)
984 #define HAL_QCN9074_TCL_DATA_CMD_INFO3_MESH_ENABLE	GENMASK(31, 30)
985 
986 #define HAL_TCL_DATA_CMD_INFO4_RING_ID			GENMASK(27, 20)
987 #define HAL_TCL_DATA_CMD_INFO4_LOOPING_COUNT		GENMASK(31, 28)
988 
989 enum hal_encrypt_type {
990 	HAL_ENCRYPT_TYPE_WEP_40,
991 	HAL_ENCRYPT_TYPE_WEP_104,
992 	HAL_ENCRYPT_TYPE_TKIP_NO_MIC,
993 	HAL_ENCRYPT_TYPE_WEP_128,
994 	HAL_ENCRYPT_TYPE_TKIP_MIC,
995 	HAL_ENCRYPT_TYPE_WAPI,
996 	HAL_ENCRYPT_TYPE_CCMP_128,
997 	HAL_ENCRYPT_TYPE_OPEN,
998 	HAL_ENCRYPT_TYPE_CCMP_256,
999 	HAL_ENCRYPT_TYPE_GCMP_128,
1000 	HAL_ENCRYPT_TYPE_AES_GCMP_256,
1001 	HAL_ENCRYPT_TYPE_WAPI_GCM_SM4,
1002 };
1003 
1004 enum hal_tcl_encap_type {
1005 	HAL_TCL_ENCAP_TYPE_RAW,
1006 	HAL_TCL_ENCAP_TYPE_NATIVE_WIFI,
1007 	HAL_TCL_ENCAP_TYPE_ETHERNET,
1008 	HAL_TCL_ENCAP_TYPE_802_3 = 3,
1009 };
1010 
1011 enum hal_tcl_desc_type {
1012 	HAL_TCL_DESC_TYPE_BUFFER,
1013 	HAL_TCL_DESC_TYPE_EXT_DESC,
1014 };
1015 
1016 enum hal_wbm_htt_tx_comp_status {
1017 	HAL_WBM_REL_HTT_TX_COMP_STATUS_OK,
1018 	HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP,
1019 	HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL,
1020 	HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ,
1021 	HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT,
1022 	HAL_WBM_REL_HTT_TX_COMP_STATUS_MEC_NOTIFY,
1023 };
1024 
1025 struct hal_tcl_data_cmd {
1026 	struct ath11k_buffer_addr buf_addr_info;
1027 	u32 info0;
1028 	u32 info1;
1029 	u32 info2;
1030 	u32 info3;
1031 	u32 info4;
1032 } __packed;
1033 
1034 /* hal_tcl_data_cmd
1035  *
1036  * buf_addr_info
1037  *		Details of the physical address of a buffer or MSDU
1038  *		link descriptor.
1039  *
1040  * desc_type
1041  *		Indicates the type of address provided in the buf_addr_info.
1042  *		Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_.
1043  *
1044  * epd
1045  *		When this bit is set then input packet is an EPD type.
1046  *
1047  * encap_type
1048  *		Indicates the encapsulation that HW will perform. Values are
1049  *		defined in enum %HAL_TCL_ENCAP_TYPE_.
1050  *
1051  * encrypt_type
1052  *		Field only valid for encap_type: RAW
1053  *		Values are defined in enum %HAL_ENCRYPT_TYPE_.
1054  *
1055  * src_buffer_swap
1056  *		Treats source memory (packet buffer) organization as big-endian.
1057  *		1'b0: Source memory is little endian
1058  *		1'b1: Source memory is big endian
1059  *
1060  * link_meta_swap
1061  *		Treats link descriptor and Metadata as big-endian.
1062  *		1'b0: memory is little endian
1063  *		1'b1: memory is big endian
1064  *
1065  * search_type
1066  *		Search type select
1067  *		0 - Normal search, 1 - Index based address search,
1068  *		2 - Index based flow search
1069  *
1070  * addrx_en
1071  * addry_en
1072  *		Address X/Y search enable in ASE correspondingly.
1073  *		1'b0: Search disable
1074  *		1'b1: Search Enable
1075  *
1076  * cmd_num
1077  *		This number can be used to match against status.
1078  *
1079  * data_length
1080  *		MSDU length in case of direct descriptor. Length of link
1081  *		extension descriptor in case of Link extension descriptor.
1082  *
1083  * *_checksum_en
1084  *		Enable checksum replacement for ipv4, udp_over_ipv4, ipv6,
1085  *		udp_over_ipv6, tcp_over_ipv4 and tcp_over_ipv6.
1086  *
1087  * to_fw
1088  *		Forward packet to FW along with classification result. The
1089  *		packet will not be forward to TQM when this bit is set.
1090  *		1'b0: Use classification result to forward the packet.
1091  *		1'b1: Override classification result & forward packet only to fw
1092  *
1093  * packet_offset
1094  *		Packet offset from Metadata in case of direct buffer descriptor.
1095  *
1096  * buffer_timestamp
1097  * buffer_timestamp_valid
1098  *		Frame system entrance timestamp. It shall be filled by first
1099  *		module (SW, TCL or TQM) that sees the frames first.
1100  *
1101  * mesh_enable
1102  *		For raw WiFi frames, this indicates transmission to a mesh STA,
1103  *		enabling the interpretation of the 'Mesh Control Present' bit
1104  *		(bit 8) of QoS Control.
1105  *		For native WiFi frames, this indicates that a 'Mesh Control'
1106  *		field is present between the header and the LLC.
1107  *
1108  * hlos_tid_overwrite
1109  *
1110  *		When set, TCL shall ignore the IP DSCP and VLAN PCP
1111  *		fields and use HLOS_TID as the final TID. Otherwise TCL
1112  *		shall consider the DSCP and PCP fields as well as HLOS_TID
1113  *		and choose a final TID based on the configured priority
1114  *
1115  * hlos_tid
1116  *		HLOS MSDU priority
1117  *		Field is used when HLOS_TID_overwrite is set.
1118  *
1119  * lmac_id
1120  *		TCL uses this LMAC_ID in address search, i.e, while
1121  *		finding matching entry for the packet in AST corresponding
1122  *		to given LMAC_ID
1123  *
1124  *		If LMAC ID is all 1s (=> value 3), it indicates wildcard
1125  *		match for any MAC
1126  *
1127  * dscp_tid_table_num
1128  *		DSCP to TID mapping table number that need to be used
1129  *		for the MSDU.
1130  *
1131  * search_index
1132  *		The index that will be used for index based address or
1133  *		flow search. The field is valid when 'search_type' is  1 or 2.
1134  *
1135  * cache_set_num
1136  *
1137  *		Cache set number that should be used to cache the index
1138  *		based search results, for address and flow search. This
1139  *		value should be equal to LSB four bits of the hash value of
1140  *		match data, in case of search index points to an entry which
1141  *		may be used in content based search also. The value can be
1142  *		anything when the entry pointed by search index will not be
1143  *		used for content based search.
1144  *
1145  * ring_id
1146  *		The buffer pointer ring ID.
1147  *		0 refers to the IDLE ring
1148  *		1 - N refers to other rings
1149  *
1150  * looping_count
1151  *
1152  *		A count value that indicates the number of times the
1153  *		producer of entries into the Ring has looped around the
1154  *		ring.
1155  *
1156  *		At initialization time, this value is set to 0. On the
1157  *		first loop, this value is set to 1. After the max value is
1158  *		reached allowed by the number of bits for this field, the
1159  *		count value continues with 0 again.
1160  *
1161  *		In case SW is the consumer of the ring entries, it can
1162  *		use this field to figure out up to where the producer of
1163  *		entries has created new entries. This eliminates the need to
1164  *		check where the head pointer' of the ring is located once
1165  *		the SW starts processing an interrupt indicating that new
1166  *		entries have been put into this ring...
1167  *
1168  *		Also note that SW if it wants only needs to look at the
1169  *		LSB bit of this count value.
1170  */
1171 
1172 #define HAL_TCL_DESC_LEN sizeof(struct hal_tcl_data_cmd)
1173 
1174 enum hal_tcl_gse_ctrl {
1175 	HAL_TCL_GSE_CTRL_RD_STAT,
1176 	HAL_TCL_GSE_CTRL_SRCH_DIS,
1177 	HAL_TCL_GSE_CTRL_WR_BK_SINGLE,
1178 	HAL_TCL_GSE_CTRL_WR_BK_ALL,
1179 	HAL_TCL_GSE_CTRL_INVAL_SINGLE,
1180 	HAL_TCL_GSE_CTRL_INVAL_ALL,
1181 	HAL_TCL_GSE_CTRL_WR_BK_INVAL_SINGLE,
1182 	HAL_TCL_GSE_CTRL_WR_BK_INVAL_ALL,
1183 	HAL_TCL_GSE_CTRL_CLR_STAT_SINGLE,
1184 };
1185 
1186 /* hal_tcl_gse_ctrl
1187  *
1188  * rd_stat
1189  *		Report or Read statistics
1190  * srch_dis
1191  *		Search disable. Report only Hash.
1192  * wr_bk_single
1193  *		Write Back single entry
1194  * wr_bk_all
1195  *		Write Back entire cache entry
1196  * inval_single
1197  *		Invalidate single cache entry
1198  * inval_all
1199  *		Invalidate entire cache
1200  * wr_bk_inval_single
1201  *		Write back and invalidate single entry in cache
1202  * wr_bk_inval_all
1203  *		Write back and invalidate entire cache
1204  * clr_stat_single
1205  *		Clear statistics for single entry
1206  */
1207 
1208 #define HAL_TCL_GSE_CMD_INFO0_CTRL_BUF_ADDR_HI		GENMASK(7, 0)
1209 #define HAL_TCL_GSE_CMD_INFO0_GSE_CTRL			GENMASK(11, 8)
1210 #define HAL_TCL_GSE_CMD_INFO0_GSE_SEL			BIT(12)
1211 #define HAL_TCL_GSE_CMD_INFO0_STATUS_DEST_RING_ID	BIT(13)
1212 #define HAL_TCL_GSE_CMD_INFO0_SWAP			BIT(14)
1213 
1214 #define HAL_TCL_GSE_CMD_INFO1_RING_ID			GENMASK(27, 20)
1215 #define HAL_TCL_GSE_CMD_INFO1_LOOPING_COUNT		GENMASK(31, 28)
1216 
1217 struct hal_tcl_gse_cmd {
1218 	u32 ctrl_buf_addr_lo;
1219 	u32 info0;
1220 	u32 meta_data[2];
1221 	u32 rsvd0[2];
1222 	u32 info1;
1223 } __packed;
1224 
1225 /* hal_tcl_gse_cmd
1226  *
1227  * ctrl_buf_addr_lo, ctrl_buf_addr_hi
1228  *		Address of a control buffer containing additional info needed
1229  *		for this command execution.
1230  *
1231  * gse_ctrl
1232  *		GSE control operations. This includes cache operations and table
1233  *		entry statistics read/clear operation. Values are defined in
1234  *		enum %HAL_TCL_GSE_CTRL.
1235  *
1236  * gse_sel
1237  *		To select the ASE/FSE to do the operation mention by GSE_ctrl.
1238  *		0: FSE select 1: ASE select
1239  *
1240  * status_destination_ring_id
1241  *		TCL status ring to which the GSE status needs to be send.
1242  *
1243  * swap
1244  *		Bit to enable byte swapping of contents of buffer.
1245  *
1246  * meta_data
1247  *		Meta data to be returned in the status descriptor
1248  */
1249 
1250 enum hal_tcl_cache_op_res {
1251 	HAL_TCL_CACHE_OP_RES_DONE,
1252 	HAL_TCL_CACHE_OP_RES_NOT_FOUND,
1253 	HAL_TCL_CACHE_OP_RES_TIMEOUT,
1254 };
1255 
1256 #define HAL_TCL_STATUS_RING_INFO0_GSE_CTRL		GENMASK(3, 0)
1257 #define HAL_TCL_STATUS_RING_INFO0_GSE_SEL		BIT(4)
1258 #define HAL_TCL_STATUS_RING_INFO0_CACHE_OP_RES		GENMASK(6, 5)
1259 #define HAL_TCL_STATUS_RING_INFO0_MSDU_CNT		GENMASK(31, 8)
1260 
1261 #define HAL_TCL_STATUS_RING_INFO1_HASH_IDX		GENMASK(19, 0)
1262 
1263 #define HAL_TCL_STATUS_RING_INFO2_RING_ID		GENMASK(27, 20)
1264 #define HAL_TCL_STATUS_RING_INFO2_LOOPING_COUNT		GENMASK(31, 28)
1265 
1266 struct hal_tcl_status_ring {
1267 	u32 info0;
1268 	u32 msdu_byte_count;
1269 	u32 msdu_timestamp;
1270 	u32 meta_data[2];
1271 	u32 info1;
1272 	u32 rsvd0;
1273 	u32 info2;
1274 } __packed;
1275 
1276 /* hal_tcl_status_ring
1277  *
1278  * gse_ctrl
1279  *		GSE control operations. This includes cache operations and table
1280  *		entry statistics read/clear operation. Values are defined in
1281  *		enum %HAL_TCL_GSE_CTRL.
1282  *
1283  * gse_sel
1284  *		To select the ASE/FSE to do the operation mention by GSE_ctrl.
1285  *		0: FSE select 1: ASE select
1286  *
1287  * cache_op_res
1288  *		Cache operation result. Values are defined in enum
1289  *		%HAL_TCL_CACHE_OP_RES_.
1290  *
1291  * msdu_cnt
1292  * msdu_byte_count
1293  *		MSDU count of Entry and MSDU byte count for entry 1.
1294  *
1295  * hash_indx
1296  *		Hash value of the entry in case of search failed or disabled.
1297  */
1298 
1299 #define HAL_CE_SRC_DESC_ADDR_INFO_ADDR_HI	GENMASK(7, 0)
1300 #define HAL_CE_SRC_DESC_ADDR_INFO_HASH_EN	BIT(8)
1301 #define HAL_CE_SRC_DESC_ADDR_INFO_BYTE_SWAP	BIT(9)
1302 #define HAL_CE_SRC_DESC_ADDR_INFO_DEST_SWAP	BIT(10)
1303 #define HAL_CE_SRC_DESC_ADDR_INFO_GATHER	BIT(11)
1304 #define HAL_CE_SRC_DESC_ADDR_INFO_LEN		GENMASK(31, 16)
1305 
1306 #define HAL_CE_SRC_DESC_META_INFO_DATA		GENMASK(15, 0)
1307 
1308 #define HAL_CE_SRC_DESC_FLAGS_RING_ID		GENMASK(27, 20)
1309 #define HAL_CE_SRC_DESC_FLAGS_LOOP_CNT		HAL_SRNG_DESC_LOOP_CNT
1310 
1311 struct hal_ce_srng_src_desc {
1312 	u32 buffer_addr_low;
1313 	u32 buffer_addr_info; /* %HAL_CE_SRC_DESC_ADDR_INFO_ */
1314 	u32 meta_info; /* %HAL_CE_SRC_DESC_META_INFO_ */
1315 	u32 flags; /* %HAL_CE_SRC_DESC_FLAGS_ */
1316 } __packed;
1317 
1318 /*
1319  * hal_ce_srng_src_desc
1320  *
1321  * buffer_addr_lo
1322  *		LSB 32 bits of the 40 Bit Pointer to the source buffer
1323  *
1324  * buffer_addr_hi
1325  *		MSB 8 bits of the 40 Bit Pointer to the source buffer
1326  *
1327  * toeplitz_en
1328  *		Enable generation of 32-bit Toeplitz-LFSR hash for
1329  *		data transfer. In case of gather field in first source
1330  *		ring entry of the gather copy cycle in taken into account.
1331  *
1332  * src_swap
1333  *		Treats source memory organization as big-endian. For
1334  *		each dword read (4 bytes), the byte 0 is swapped with byte 3
1335  *		and byte 1 is swapped with byte 2.
1336  *		In case of gather field in first source ring entry of
1337  *		the gather copy cycle in taken into account.
1338  *
1339  * dest_swap
1340  *		Treats destination memory organization as big-endian.
1341  *		For each dword write (4 bytes), the byte 0 is swapped with
1342  *		byte 3 and byte 1 is swapped with byte 2.
1343  *		In case of gather field in first source ring entry of
1344  *		the gather copy cycle in taken into account.
1345  *
1346  * gather
1347  *		Enables gather of multiple copy engine source
1348  *		descriptors to one destination.
1349  *
1350  * ce_res_0
1351  *		Reserved
1352  *
1353  *
1354  * length
1355  *		Length of the buffer in units of octets of the current
1356  *		descriptor
1357  *
1358  * fw_metadata
1359  *		Meta data used by FW.
1360  *		In case of gather field in first source ring entry of
1361  *		the gather copy cycle in taken into account.
1362  *
1363  * ce_res_1
1364  *		Reserved
1365  *
1366  * ce_res_2
1367  *		Reserved
1368  *
1369  * ring_id
1370  *		The buffer pointer ring ID.
1371  *		0 refers to the IDLE ring
1372  *		1 - N refers to other rings
1373  *		Helps with debugging when dumping ring contents.
1374  *
1375  * looping_count
1376  *		A count value that indicates the number of times the
1377  *		producer of entries into the Ring has looped around the
1378  *		ring.
1379  *
1380  *		At initialization time, this value is set to 0. On the
1381  *		first loop, this value is set to 1. After the max value is
1382  *		reached allowed by the number of bits for this field, the
1383  *		count value continues with 0 again.
1384  *
1385  *		In case SW is the consumer of the ring entries, it can
1386  *		use this field to figure out up to where the producer of
1387  *		entries has created new entries. This eliminates the need to
1388  *		check where the head pointer' of the ring is located once
1389  *		the SW starts processing an interrupt indicating that new
1390  *		entries have been put into this ring...
1391  *
1392  *		Also note that SW if it wants only needs to look at the
1393  *		LSB bit of this count value.
1394  */
1395 
1396 #define HAL_CE_DEST_DESC_ADDR_INFO_ADDR_HI		GENMASK(7, 0)
1397 #define HAL_CE_DEST_DESC_ADDR_INFO_RING_ID		GENMASK(27, 20)
1398 #define HAL_CE_DEST_DESC_ADDR_INFO_LOOP_CNT		HAL_SRNG_DESC_LOOP_CNT
1399 
1400 struct hal_ce_srng_dest_desc {
1401 	u32 buffer_addr_low;
1402 	u32 buffer_addr_info; /* %HAL_CE_DEST_DESC_ADDR_INFO_ */
1403 } __packed;
1404 
1405 /* hal_ce_srng_dest_desc
1406  *
1407  * dst_buffer_low
1408  *		LSB 32 bits of the 40 Bit Pointer to the Destination
1409  *		buffer
1410  *
1411  * dst_buffer_high
1412  *		MSB 8 bits of the 40 Bit Pointer to the Destination
1413  *		buffer
1414  *
1415  * ce_res_4
1416  *		Reserved
1417  *
1418  * ring_id
1419  *		The buffer pointer ring ID.
1420  *		0 refers to the IDLE ring
1421  *		1 - N refers to other rings
1422  *		Helps with debugging when dumping ring contents.
1423  *
1424  * looping_count
1425  *		A count value that indicates the number of times the
1426  *		producer of entries into the Ring has looped around the
1427  *		ring.
1428  *
1429  *		At initialization time, this value is set to 0. On the
1430  *		first loop, this value is set to 1. After the max value is
1431  *		reached allowed by the number of bits for this field, the
1432  *		count value continues with 0 again.
1433  *
1434  *		In case SW is the consumer of the ring entries, it can
1435  *		use this field to figure out up to where the producer of
1436  *		entries has created new entries. This eliminates the need to
1437  *		check where the head pointer' of the ring is located once
1438  *		the SW starts processing an interrupt indicating that new
1439  *		entries have been put into this ring...
1440  *
1441  *		Also note that SW if it wants only needs to look at the
1442  *		LSB bit of this count value.
1443  */
1444 
1445 #define HAL_CE_DST_STATUS_DESC_FLAGS_HASH_EN		BIT(8)
1446 #define HAL_CE_DST_STATUS_DESC_FLAGS_BYTE_SWAP		BIT(9)
1447 #define HAL_CE_DST_STATUS_DESC_FLAGS_DEST_SWAP		BIT(10)
1448 #define HAL_CE_DST_STATUS_DESC_FLAGS_GATHER		BIT(11)
1449 #define HAL_CE_DST_STATUS_DESC_FLAGS_LEN		GENMASK(31, 16)
1450 
1451 #define HAL_CE_DST_STATUS_DESC_META_INFO_DATA		GENMASK(15, 0)
1452 #define HAL_CE_DST_STATUS_DESC_META_INFO_RING_ID	GENMASK(27, 20)
1453 #define HAL_CE_DST_STATUS_DESC_META_INFO_LOOP_CNT	HAL_SRNG_DESC_LOOP_CNT
1454 
1455 struct hal_ce_srng_dst_status_desc {
1456 	u32 flags; /* %HAL_CE_DST_STATUS_DESC_FLAGS_ */
1457 	u32 toeplitz_hash0;
1458 	u32 toeplitz_hash1;
1459 	u32 meta_info; /* HAL_CE_DST_STATUS_DESC_META_INFO_ */
1460 } __packed;
1461 
1462 /* hal_ce_srng_dst_status_desc
1463  *
1464  * ce_res_5
1465  *		Reserved
1466  *
1467  * toeplitz_en
1468  *
1469  * src_swap
1470  *		Source memory buffer swapped
1471  *
1472  * dest_swap
1473  *		Destination  memory buffer swapped
1474  *
1475  * gather
1476  *		Gather of multiple copy engine source descriptors to one
1477  *		destination enabled
1478  *
1479  * ce_res_6
1480  *		Reserved
1481  *
1482  * length
1483  *		Sum of all the Lengths of the source descriptor in the
1484  *		gather chain
1485  *
1486  * toeplitz_hash_0
1487  *		32 LS bits of 64 bit Toeplitz LFSR hash result
1488  *
1489  * toeplitz_hash_1
1490  *		32 MS bits of 64 bit Toeplitz LFSR hash result
1491  *
1492  * fw_metadata
1493  *		Meta data used by FW
1494  *		In case of gather field in first source ring entry of
1495  *		the gather copy cycle in taken into account.
1496  *
1497  * ce_res_7
1498  *		Reserved
1499  *
1500  * ring_id
1501  *		The buffer pointer ring ID.
1502  *		0 refers to the IDLE ring
1503  *		1 - N refers to other rings
1504  *		Helps with debugging when dumping ring contents.
1505  *
1506  * looping_count
1507  *		A count value that indicates the number of times the
1508  *		producer of entries into the Ring has looped around the
1509  *		ring.
1510  *
1511  *		At initialization time, this value is set to 0. On the
1512  *		first loop, this value is set to 1. After the max value is
1513  *		reached allowed by the number of bits for this field, the
1514  *		count value continues with 0 again.
1515  *
1516  *		In case SW is the consumer of the ring entries, it can
1517  *		use this field to figure out up to where the producer of
1518  *		entries has created new entries. This eliminates the need to
1519  *		check where the head pointer' of the ring is located once
1520  *		the SW starts processing an interrupt indicating that new
1521  *		entries have been put into this ring...
1522  *
1523  *		Also note that SW if it wants only needs to look at the
1524  *			LSB bit of this count value.
1525  */
1526 
1527 #define HAL_TX_RATE_STATS_INFO0_VALID		BIT(0)
1528 #define HAL_TX_RATE_STATS_INFO0_BW		GENMASK(2, 1)
1529 #define HAL_TX_RATE_STATS_INFO0_PKT_TYPE	GENMASK(6, 3)
1530 #define HAL_TX_RATE_STATS_INFO0_STBC		BIT(7)
1531 #define HAL_TX_RATE_STATS_INFO0_LDPC		BIT(8)
1532 #define HAL_TX_RATE_STATS_INFO0_SGI		GENMASK(10, 9)
1533 #define HAL_TX_RATE_STATS_INFO0_MCS		GENMASK(14, 11)
1534 #define HAL_TX_RATE_STATS_INFO0_OFDMA_TX	BIT(15)
1535 #define HAL_TX_RATE_STATS_INFO0_TONES_IN_RU	GENMASK(27, 16)
1536 
1537 enum hal_tx_rate_stats_bw {
1538 	HAL_TX_RATE_STATS_BW_20,
1539 	HAL_TX_RATE_STATS_BW_40,
1540 	HAL_TX_RATE_STATS_BW_80,
1541 	HAL_TX_RATE_STATS_BW_160,
1542 };
1543 
1544 enum hal_tx_rate_stats_pkt_type {
1545 	HAL_TX_RATE_STATS_PKT_TYPE_11A,
1546 	HAL_TX_RATE_STATS_PKT_TYPE_11B,
1547 	HAL_TX_RATE_STATS_PKT_TYPE_11N,
1548 	HAL_TX_RATE_STATS_PKT_TYPE_11AC,
1549 	HAL_TX_RATE_STATS_PKT_TYPE_11AX,
1550 };
1551 
1552 enum hal_tx_rate_stats_sgi {
1553 	HAL_TX_RATE_STATS_SGI_08US,
1554 	HAL_TX_RATE_STATS_SGI_04US,
1555 	HAL_TX_RATE_STATS_SGI_16US,
1556 	HAL_TX_RATE_STATS_SGI_32US,
1557 };
1558 
1559 struct hal_tx_rate_stats {
1560 	u32 info0;
1561 	u32 tsf;
1562 } __packed;
1563 
1564 struct hal_wbm_link_desc {
1565 	struct ath11k_buffer_addr buf_addr_info;
1566 } __packed;
1567 
1568 /* hal_wbm_link_desc
1569  *
1570  *	Producer: WBM
1571  *	Consumer: WBM
1572  *
1573  * buf_addr_info
1574  *		Details of the physical address of a buffer or MSDU
1575  *		link descriptor.
1576  */
1577 
1578 enum hal_wbm_rel_src_module {
1579 	HAL_WBM_REL_SRC_MODULE_TQM,
1580 	HAL_WBM_REL_SRC_MODULE_RXDMA,
1581 	HAL_WBM_REL_SRC_MODULE_REO,
1582 	HAL_WBM_REL_SRC_MODULE_FW,
1583 	HAL_WBM_REL_SRC_MODULE_SW,
1584 };
1585 
1586 enum hal_wbm_rel_desc_type {
1587 	HAL_WBM_REL_DESC_TYPE_REL_MSDU,
1588 	HAL_WBM_REL_DESC_TYPE_MSDU_LINK,
1589 	HAL_WBM_REL_DESC_TYPE_MPDU_LINK,
1590 	HAL_WBM_REL_DESC_TYPE_MSDU_EXT,
1591 	HAL_WBM_REL_DESC_TYPE_QUEUE_EXT,
1592 };
1593 
1594 /* hal_wbm_rel_desc_type
1595  *
1596  * msdu_buffer
1597  *	The address points to an MSDU buffer
1598  *
1599  * msdu_link_descriptor
1600  *	The address points to an Tx MSDU link descriptor
1601  *
1602  * mpdu_link_descriptor
1603  *	The address points to an MPDU link descriptor
1604  *
1605  * msdu_ext_descriptor
1606  *	The address points to an MSDU extension descriptor
1607  *
1608  * queue_ext_descriptor
1609  *	The address points to an TQM queue extension descriptor. WBM should
1610  *	treat this is the same way as a link descriptor.
1611  */
1612 
1613 enum hal_wbm_rel_bm_act {
1614 	HAL_WBM_REL_BM_ACT_PUT_IN_IDLE,
1615 	HAL_WBM_REL_BM_ACT_REL_MSDU,
1616 };
1617 
1618 /* hal_wbm_rel_bm_act
1619  *
1620  * put_in_idle_list
1621  *	Put the buffer or descriptor back in the idle list. In case of MSDU or
1622  *	MDPU link descriptor, BM does not need to check to release any
1623  *	individual MSDU buffers.
1624  *
1625  * release_msdu_list
1626  *	This BM action can only be used in combination with desc_type being
1627  *	msdu_link_descriptor. Field first_msdu_index points out which MSDU
1628  *	pointer in the MSDU link descriptor is the first of an MPDU that is
1629  *	released. BM shall release all the MSDU buffers linked to this first
1630  *	MSDU buffer pointer. All related MSDU buffer pointer entries shall be
1631  *	set to value 0, which represents the 'NULL' pointer. When all MSDU
1632  *	buffer pointers in the MSDU link descriptor are 'NULL', the MSDU link
1633  *	descriptor itself shall also be released.
1634  */
1635 
1636 #define HAL_WBM_RELEASE_INFO0_REL_SRC_MODULE		GENMASK(2, 0)
1637 #define HAL_WBM_RELEASE_INFO0_BM_ACTION			GENMASK(5, 3)
1638 #define HAL_WBM_RELEASE_INFO0_DESC_TYPE			GENMASK(8, 6)
1639 #define HAL_WBM_RELEASE_INFO0_FIRST_MSDU_IDX		GENMASK(12, 9)
1640 #define HAL_WBM_RELEASE_INFO0_TQM_RELEASE_REASON	GENMASK(16, 13)
1641 #define HAL_WBM_RELEASE_INFO0_RXDMA_PUSH_REASON		GENMASK(18, 17)
1642 #define HAL_WBM_RELEASE_INFO0_RXDMA_ERROR_CODE		GENMASK(23, 19)
1643 #define HAL_WBM_RELEASE_INFO0_REO_PUSH_REASON		GENMASK(25, 24)
1644 #define HAL_WBM_RELEASE_INFO0_REO_ERROR_CODE		GENMASK(30, 26)
1645 #define HAL_WBM_RELEASE_INFO0_WBM_INTERNAL_ERROR	BIT(31)
1646 
1647 #define HAL_WBM_RELEASE_INFO1_TQM_STATUS_NUMBER		GENMASK(23, 0)
1648 #define HAL_WBM_RELEASE_INFO1_TRANSMIT_COUNT		GENMASK(30, 24)
1649 
1650 #define HAL_WBM_RELEASE_INFO2_ACK_FRAME_RSSI		GENMASK(7, 0)
1651 #define HAL_WBM_RELEASE_INFO2_SW_REL_DETAILS_VALID	BIT(8)
1652 #define HAL_WBM_RELEASE_INFO2_FIRST_MSDU		BIT(9)
1653 #define HAL_WBM_RELEASE_INFO2_LAST_MSDU			BIT(10)
1654 #define HAL_WBM_RELEASE_INFO2_MSDU_IN_AMSDU		BIT(11)
1655 #define HAL_WBM_RELEASE_INFO2_FW_TX_NOTIF_FRAME		BIT(12)
1656 #define HAL_WBM_RELEASE_INFO2_BUFFER_TIMESTAMP		GENMASK(31, 13)
1657 
1658 #define HAL_WBM_RELEASE_INFO3_PEER_ID			GENMASK(15, 0)
1659 #define HAL_WBM_RELEASE_INFO3_TID			GENMASK(19, 16)
1660 #define HAL_WBM_RELEASE_INFO3_RING_ID			GENMASK(27, 20)
1661 #define HAL_WBM_RELEASE_INFO3_LOOPING_COUNT		GENMASK(31, 28)
1662 
1663 #define HAL_WBM_REL_HTT_TX_COMP_INFO0_STATUS		GENMASK(12, 9)
1664 #define HAL_WBM_REL_HTT_TX_COMP_INFO0_REINJ_REASON	GENMASK(16, 13)
1665 #define HAL_WBM_REL_HTT_TX_COMP_INFO0_EXP_FRAME		BIT(17)
1666 
1667 struct hal_wbm_release_ring {
1668 	struct ath11k_buffer_addr buf_addr_info;
1669 	u32 info0;
1670 	u32 info1;
1671 	u32 info2;
1672 	struct hal_tx_rate_stats rate_stats;
1673 	u32 info3;
1674 } __packed;
1675 
1676 /* hal_wbm_release_ring
1677  *
1678  *	Producer: SW/TQM/RXDMA/REO/SWITCH
1679  *	Consumer: WBM/SW/FW
1680  *
1681  * HTT tx status is overlayed on wbm_release ring on 4-byte words 2, 3, 4 and 5
1682  * for software based completions.
1683  *
1684  * buf_addr_info
1685  *	Details of the physical address of the buffer or link descriptor.
1686  *
1687  * release_source_module
1688  *	Indicates which module initiated the release of this buffer/descriptor.
1689  *	Values are defined in enum %HAL_WBM_REL_SRC_MODULE_.
1690  *
1691  * bm_action
1692  *	Field only valid when the field return_buffer_manager in
1693  *	Released_buff_or_desc_addr_info indicates:
1694  *		WBM_IDLE_BUF_LIST / WBM_IDLE_DESC_LIST
1695  *	Values are defined in enum %HAL_WBM_REL_BM_ACT_.
1696  *
1697  * buffer_or_desc_type
1698  *	Field only valid when WBM is marked as the return_buffer_manager in
1699  *	the Released_Buffer_address_info. Indicates that type of buffer or
1700  *	descriptor is being released. Values are in enum %HAL_WBM_REL_DESC_TYPE.
1701  *
1702  * first_msdu_index
1703  *	Field only valid for the bm_action release_msdu_list. The index of the
1704  *	first MSDU in an MSDU link descriptor all belonging to the same MPDU.
1705  *
1706  * tqm_release_reason
1707  *	Field only valid when Release_source_module is set to release_source_TQM
1708  *	Release reasons are defined in enum %HAL_WBM_TQM_REL_REASON_.
1709  *
1710  * rxdma_push_reason
1711  * reo_push_reason
1712  *	Indicates why rxdma/reo pushed the frame to this ring and values are
1713  *	defined in enum %HAL_REO_DEST_RING_PUSH_REASON_.
1714  *
1715  * rxdma_error_code
1716  *	Field only valid when 'rxdma_push_reason' set to 'error_detected'.
1717  *	Values are defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_.
1718  *
1719  * reo_error_code
1720  *	Field only valid when 'reo_push_reason' set to 'error_detected'. Values
1721  *	are defined in enum %HAL_REO_DEST_RING_ERROR_CODE_.
1722  *
1723  * wbm_internal_error
1724  *	Is set when WBM got a buffer pointer but the action was to push it to
1725  *	the idle link descriptor ring or do link related activity OR
1726  *	Is set when WBM got a link buffer pointer but the action was to push it
1727  *	to the buffer descriptor ring.
1728  *
1729  * tqm_status_number
1730  *	The value in this field is equal to tqm_cmd_number in TQM command. It is
1731  *	used to correlate the statu with TQM commands. Only valid when
1732  *	release_source_module is TQM.
1733  *
1734  * transmit_count
1735  *	The number of times the frame has been transmitted, valid only when
1736  *	release source in TQM.
1737  *
1738  * ack_frame_rssi
1739  *	This field is only valid when the source is TQM. If this frame is
1740  *	removed as the result of the reception of an ACK or BA, this field
1741  *	indicates the RSSI of the received ACK or BA frame.
1742  *
1743  * sw_release_details_valid
1744  *	This is set when WMB got a 'release_msdu_list' command from TQM and
1745  *	return buffer manager is not WMB. WBM will then de-aggregate all MSDUs
1746  *	and pass them one at a time on to the 'buffer owner'.
1747  *
1748  * first_msdu
1749  *	Field only valid when SW_release_details_valid is set.
1750  *	When set, this MSDU is the first MSDU pointed to in the
1751  *	'release_msdu_list' command.
1752  *
1753  * last_msdu
1754  *	Field only valid when SW_release_details_valid is set.
1755  *	When set, this MSDU is the last MSDU pointed to in the
1756  *	'release_msdu_list' command.
1757  *
1758  * msdu_part_of_amsdu
1759  *	Field only valid when SW_release_details_valid is set.
1760  *	When set, this MSDU was part of an A-MSDU in MPDU
1761  *
1762  * fw_tx_notify_frame
1763  *	Field only valid when SW_release_details_valid is set.
1764  *
1765  * buffer_timestamp
1766  *	Field only valid when SW_release_details_valid is set.
1767  *	This is the Buffer_timestamp field from the
1768  *	Timestamp in units of 1024 us
1769  *
1770  * struct hal_tx_rate_stats rate_stats
1771  *	Details for command execution tracking purposes.
1772  *
1773  * sw_peer_id
1774  * tid
1775  *	Field only valid when Release_source_module is set to
1776  *	release_source_TQM
1777  *
1778  *	1) Release of msdu buffer due to drop_frame = 1. Flow is
1779  *	not fetched and hence sw_peer_id and tid = 0
1780  *
1781  *	buffer_or_desc_type = e_num 0
1782  *	MSDU_rel_buffertqm_release_reason = e_num 1
1783  *	tqm_rr_rem_cmd_rem
1784  *
1785  *	2) Release of msdu buffer due to Flow is not fetched and
1786  *	hence sw_peer_id and tid = 0
1787  *
1788  *	buffer_or_desc_type = e_num 0
1789  *	MSDU_rel_buffertqm_release_reason = e_num 1
1790  *	tqm_rr_rem_cmd_rem
1791  *
1792  *	3) Release of msdu link due to remove_mpdu or acked_mpdu
1793  *	command.
1794  *
1795  *	buffer_or_desc_type = e_num1
1796  *	msdu_link_descriptortqm_release_reason can be:e_num 1
1797  *	tqm_rr_rem_cmd_reme_num 2 tqm_rr_rem_cmd_tx
1798  *	e_num 3 tqm_rr_rem_cmd_notxe_num 4 tqm_rr_rem_cmd_aged
1799  *
1800  *	This field represents the TID from the TX_MSDU_FLOW
1801  *	descriptor or TX_MPDU_QUEUE descriptor
1802  *
1803  * rind_id
1804  *	For debugging.
1805  *	This field is filled in by the SRNG module.
1806  *	It help to identify the ring that is being looked
1807  *
1808  * looping_count
1809  *	A count value that indicates the number of times the
1810  *	producer of entries into the Buffer Manager Ring has looped
1811  *	around the ring.
1812  *
1813  *	At initialization time, this value is set to 0. On the
1814  *	first loop, this value is set to 1. After the max value is
1815  *	reached allowed by the number of bits for this field, the
1816  *	count value continues with 0 again.
1817  *
1818  *	In case SW is the consumer of the ring entries, it can
1819  *	use this field to figure out up to where the producer of
1820  *	entries has created new entries. This eliminates the need to
1821  *	check where the head pointer' of the ring is located once
1822  *	the SW starts processing an interrupt indicating that new
1823  *	entries have been put into this ring...
1824  *
1825  *	Also note that SW if it wants only needs to look at the
1826  *	LSB bit of this count value.
1827  */
1828 
1829 /**
1830  * enum hal_wbm_tqm_rel_reason - TQM release reason code
1831  * @HAL_WBM_TQM_REL_REASON_FRAME_ACKED: ACK or BACK received for the frame
1832  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU: Command remove_mpdus initiated by SW
1833  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX: Command remove transmitted_mpdus
1834  *	initiated by sw.
1835  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX: Command remove untransmitted_mpdus
1836  *	initiated by sw.
1837  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES: Command remove aged msdus or
1838  *	mpdus.
1839  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1: Remove command initiated by
1840  *	fw with fw_reason1.
1841  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2: Remove command initiated by
1842  *	fw with fw_reason2.
1843  * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3: Remove command initiated by
1844  *	fw with fw_reason3.
1845  */
1846 enum hal_wbm_tqm_rel_reason {
1847 	HAL_WBM_TQM_REL_REASON_FRAME_ACKED,
1848 	HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU,
1849 	HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX,
1850 	HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX,
1851 	HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES,
1852 	HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1,
1853 	HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2,
1854 	HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3,
1855 };
1856 
1857 struct hal_wbm_buffer_ring {
1858 	struct ath11k_buffer_addr buf_addr_info;
1859 };
1860 
1861 enum hal_desc_owner {
1862 	HAL_DESC_OWNER_WBM,
1863 	HAL_DESC_OWNER_SW,
1864 	HAL_DESC_OWNER_TQM,
1865 	HAL_DESC_OWNER_RXDMA,
1866 	HAL_DESC_OWNER_REO,
1867 	HAL_DESC_OWNER_SWITCH,
1868 };
1869 
1870 enum hal_desc_buf_type {
1871 	HAL_DESC_BUF_TYPE_TX_MSDU_LINK,
1872 	HAL_DESC_BUF_TYPE_TX_MPDU_LINK,
1873 	HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_HEAD,
1874 	HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_EXT,
1875 	HAL_DESC_BUF_TYPE_TX_FLOW,
1876 	HAL_DESC_BUF_TYPE_TX_BUFFER,
1877 	HAL_DESC_BUF_TYPE_RX_MSDU_LINK,
1878 	HAL_DESC_BUF_TYPE_RX_MPDU_LINK,
1879 	HAL_DESC_BUF_TYPE_RX_REO_QUEUE,
1880 	HAL_DESC_BUF_TYPE_RX_REO_QUEUE_EXT,
1881 	HAL_DESC_BUF_TYPE_RX_BUFFER,
1882 	HAL_DESC_BUF_TYPE_IDLE_LINK,
1883 };
1884 
1885 #define HAL_DESC_REO_OWNED		4
1886 #define HAL_DESC_REO_QUEUE_DESC		8
1887 #define HAL_DESC_REO_QUEUE_EXT_DESC	9
1888 #define HAL_DESC_REO_NON_QOS_TID	16
1889 
1890 #define HAL_DESC_HDR_INFO0_OWNER	GENMASK(3, 0)
1891 #define HAL_DESC_HDR_INFO0_BUF_TYPE	GENMASK(7, 4)
1892 #define HAL_DESC_HDR_INFO0_DBG_RESERVED	GENMASK(31, 8)
1893 
1894 struct hal_desc_header {
1895 	u32 info0;
1896 } __packed;
1897 
1898 struct hal_rx_mpdu_link_ptr {
1899 	struct ath11k_buffer_addr addr_info;
1900 } __packed;
1901 
1902 struct hal_rx_msdu_details {
1903 	struct ath11k_buffer_addr buf_addr_info;
1904 	struct rx_msdu_desc rx_msdu_info;
1905 } __packed;
1906 
1907 #define HAL_RX_MSDU_LNK_INFO0_RX_QUEUE_NUMBER		GENMASK(15, 0)
1908 #define HAL_RX_MSDU_LNK_INFO0_FIRST_MSDU_LNK		BIT(16)
1909 
1910 struct hal_rx_msdu_link {
1911 	struct hal_desc_header desc_hdr;
1912 	struct ath11k_buffer_addr buf_addr_info;
1913 	u32 info0;
1914 	u32 pn[4];
1915 	struct hal_rx_msdu_details msdu_link[6];
1916 } __packed;
1917 
1918 struct hal_rx_reo_queue_ext {
1919 	struct hal_desc_header desc_hdr;
1920 	u32 rsvd;
1921 	struct hal_rx_mpdu_link_ptr mpdu_link[15];
1922 } __packed;
1923 
1924 /* hal_rx_reo_queue_ext
1925  *	Consumer: REO
1926  *	Producer: REO
1927  *
1928  * descriptor_header
1929  *	Details about which module owns this struct.
1930  *
1931  * mpdu_link
1932  *	Pointer to the next MPDU_link descriptor in the MPDU queue.
1933  */
1934 
1935 enum hal_rx_reo_queue_pn_size {
1936 	HAL_RX_REO_QUEUE_PN_SIZE_24,
1937 	HAL_RX_REO_QUEUE_PN_SIZE_48,
1938 	HAL_RX_REO_QUEUE_PN_SIZE_128,
1939 };
1940 
1941 #define HAL_RX_REO_QUEUE_RX_QUEUE_NUMBER		GENMASK(15, 0)
1942 
1943 #define HAL_RX_REO_QUEUE_INFO0_VLD			BIT(0)
1944 #define HAL_RX_REO_QUEUE_INFO0_ASSOC_LNK_DESC_COUNTER	GENMASK(2, 1)
1945 #define HAL_RX_REO_QUEUE_INFO0_DIS_DUP_DETECTION	BIT(3)
1946 #define HAL_RX_REO_QUEUE_INFO0_SOFT_REORDER_EN		BIT(4)
1947 #define HAL_RX_REO_QUEUE_INFO0_AC			GENMASK(6, 5)
1948 #define HAL_RX_REO_QUEUE_INFO0_BAR			BIT(7)
1949 #define HAL_RX_REO_QUEUE_INFO0_RETRY			BIT(8)
1950 #define HAL_RX_REO_QUEUE_INFO0_CHECK_2K_MODE		BIT(9)
1951 #define HAL_RX_REO_QUEUE_INFO0_OOR_MODE			BIT(10)
1952 #define HAL_RX_REO_QUEUE_INFO0_BA_WINDOW_SIZE		GENMASK(18, 11)
1953 #define HAL_RX_REO_QUEUE_INFO0_PN_CHECK			BIT(19)
1954 #define HAL_RX_REO_QUEUE_INFO0_EVEN_PN			BIT(20)
1955 #define HAL_RX_REO_QUEUE_INFO0_UNEVEN_PN		BIT(21)
1956 #define HAL_RX_REO_QUEUE_INFO0_PN_HANDLE_ENABLE		BIT(22)
1957 #define HAL_RX_REO_QUEUE_INFO0_PN_SIZE			GENMASK(24, 23)
1958 #define HAL_RX_REO_QUEUE_INFO0_IGNORE_AMPDU_FLG		BIT(25)
1959 
1960 #define HAL_RX_REO_QUEUE_INFO1_SVLD			BIT(0)
1961 #define HAL_RX_REO_QUEUE_INFO1_SSN			GENMASK(12, 1)
1962 #define HAL_RX_REO_QUEUE_INFO1_CURRENT_IDX		GENMASK(20, 13)
1963 #define HAL_RX_REO_QUEUE_INFO1_SEQ_2K_ERR		BIT(21)
1964 #define HAL_RX_REO_QUEUE_INFO1_PN_ERR			BIT(22)
1965 #define HAL_RX_REO_QUEUE_INFO1_PN_VALID			BIT(31)
1966 
1967 #define HAL_RX_REO_QUEUE_INFO2_MPDU_COUNT		GENMASK(6, 0)
1968 #define HAL_RX_REO_QUEUE_INFO2_MSDU_COUNT		(31, 7)
1969 
1970 #define HAL_RX_REO_QUEUE_INFO3_TIMEOUT_COUNT		GENMASK(9, 4)
1971 #define HAL_RX_REO_QUEUE_INFO3_FWD_DUE_TO_BAR_CNT	GENMASK(15, 10)
1972 #define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT		GENMASK(31, 16)
1973 
1974 #define HAL_RX_REO_QUEUE_INFO4_FRAME_IN_ORD_COUNT	GENMASK(23, 0)
1975 #define HAL_RX_REO_QUEUE_INFO4_BAR_RECVD_COUNT		GENMASK(31, 24)
1976 
1977 #define HAL_RX_REO_QUEUE_INFO5_LATE_RX_MPDU_COUNT	GENMASK(11, 0)
1978 #define HAL_RX_REO_QUEUE_INFO5_WINDOW_JUMP_2K		GENMASK(15, 12)
1979 #define HAL_RX_REO_QUEUE_INFO5_HOLE_COUNT		GENMASK(31, 16)
1980 
1981 struct hal_rx_reo_queue {
1982 	struct hal_desc_header desc_hdr;
1983 	u32 rx_queue_num;
1984 	u32 info0;
1985 	u32 info1;
1986 	u32 pn[4];
1987 	u32 last_rx_enqueue_timestamp;
1988 	u32 last_rx_dequeue_timestamp;
1989 	u32 next_aging_queue[2];
1990 	u32 prev_aging_queue[2];
1991 	u32 rx_bitmap[8];
1992 	u32 info2;
1993 	u32 info3;
1994 	u32 info4;
1995 	u32 processed_mpdus;
1996 	u32 processed_msdus;
1997 	u32 processed_total_bytes;
1998 	u32 info5;
1999 	u32 rsvd[3];
2000 	struct hal_rx_reo_queue_ext ext_desc[];
2001 } __packed;
2002 
2003 /* hal_rx_reo_queue
2004  *
2005  * descriptor_header
2006  *	Details about which module owns this struct. Note that sub field
2007  *	Buffer_type shall be set to receive_reo_queue_descriptor.
2008  *
2009  * receive_queue_number
2010  *	Indicates the MPDU queue ID to which this MPDU link descriptor belongs.
2011  *
2012  * vld
2013  *	Valid bit indicating a session is established and the queue descriptor
2014  *	is valid.
2015  * associated_link_descriptor_counter
2016  *	Indicates which of the 3 link descriptor counters shall be incremented
2017  *	or decremented when link descriptors are added or removed from this
2018  *	flow queue.
2019  * disable_duplicate_detection
2020  *	When set, do not perform any duplicate detection.
2021  * soft_reorder_enable
2022  *	When set, REO has been instructed to not perform the actual re-ordering
2023  *	of frames for this queue, but just to insert the reorder opcodes.
2024  * ac
2025  *	Indicates the access category of the queue descriptor.
2026  * bar
2027  *	Indicates if BAR has been received.
2028  * retry
2029  *	Retry bit is checked if this bit is set.
2030  * chk_2k_mode
2031  *	Indicates what type of operation is expected from Reo when the received
2032  *	frame SN falls within the 2K window.
2033  * oor_mode
2034  *	Indicates what type of operation is expected when the received frame
2035  *	falls within the OOR window.
2036  * ba_window_size
2037  *	Indicates the negotiated (window size + 1). Max of 256 bits.
2038  *
2039  *	A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA
2040  *	session, with window size of 0). The 3 values here are the main values
2041  *	validated, but other values should work as well.
2042  *
2043  *	A BA window size of 0 (=> one frame entry bitmat), means that there is
2044  *	no additional rx_reo_queue_ext desc. following rx_reo_queue in memory.
2045  *	A BA window size of 1 - 105, means that there is 1 rx_reo_queue_ext.
2046  *	A BA window size of 106 - 210, means that there are 2 rx_reo_queue_ext.
2047  *	A BA window size of 211 - 256, means that there are 3 rx_reo_queue_ext.
2048  * pn_check_needed, pn_shall_be_even, pn_shall_be_uneven, pn_handling_enable,
2049  * pn_size
2050  *	REO shall perform the PN increment check, even number check, uneven
2051  *	number check, PN error check and size of the PN field check.
2052  * ignore_ampdu_flag
2053  *	REO shall ignore the ampdu_flag on entrance descriptor for this queue.
2054  *
2055  * svld
2056  *	Sequence number in next field is valid one.
2057  * ssn
2058  *	 Starting Sequence number of the session.
2059  * current_index
2060  *	Points to last forwarded packet
2061  * seq_2k_error_detected_flag
2062  *	REO has detected a 2k error jump in the sequence number and from that
2063  *	moment forward, all new frames are forwarded directly to FW, without
2064  *	duplicate detect, reordering, etc.
2065  * pn_error_detected_flag
2066  *	REO has detected a PN error.
2067  */
2068 
2069 #define HAL_REO_UPD_RX_QUEUE_INFO0_QUEUE_ADDR_HI		GENMASK(7, 0)
2070 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RX_QUEUE_NUM		BIT(8)
2071 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_VLD			BIT(9)
2072 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_ASSOC_LNK_DESC_CNT	BIT(10)
2073 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_DIS_DUP_DETECTION	BIT(11)
2074 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SOFT_REORDER_EN		BIT(12)
2075 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_AC			BIT(13)
2076 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BAR			BIT(14)
2077 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RETRY			BIT(15)
2078 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_CHECK_2K_MODE		BIT(16)
2079 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_OOR_MODE			BIT(17)
2080 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BA_WINDOW_SIZE		BIT(18)
2081 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_CHECK			BIT(19)
2082 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_EVEN_PN			BIT(20)
2083 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_UNEVEN_PN		BIT(21)
2084 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_HANDLE_ENABLE		BIT(22)
2085 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_SIZE			BIT(23)
2086 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_IGNORE_AMPDU_FLG		BIT(24)
2087 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SVLD			BIT(25)
2088 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SSN			BIT(26)
2089 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SEQ_2K_ERR		BIT(27)
2090 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_ERR			BIT(28)
2091 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_VALID			BIT(29)
2092 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN			BIT(30)
2093 
2094 #define HAL_REO_UPD_RX_QUEUE_INFO1_RX_QUEUE_NUMBER		GENMASK(15, 0)
2095 #define HAL_REO_UPD_RX_QUEUE_INFO1_VLD				BIT(16)
2096 #define HAL_REO_UPD_RX_QUEUE_INFO1_ASSOC_LNK_DESC_COUNTER	GENMASK(18, 17)
2097 #define HAL_REO_UPD_RX_QUEUE_INFO1_DIS_DUP_DETECTION		BIT(19)
2098 #define HAL_REO_UPD_RX_QUEUE_INFO1_SOFT_REORDER_EN		BIT(20)
2099 #define HAL_REO_UPD_RX_QUEUE_INFO1_AC				GENMASK(22, 21)
2100 #define HAL_REO_UPD_RX_QUEUE_INFO1_BAR				BIT(23)
2101 #define HAL_REO_UPD_RX_QUEUE_INFO1_RETRY			BIT(24)
2102 #define HAL_REO_UPD_RX_QUEUE_INFO1_CHECK_2K_MODE		BIT(25)
2103 #define HAL_REO_UPD_RX_QUEUE_INFO1_OOR_MODE			BIT(26)
2104 #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_CHECK			BIT(27)
2105 #define HAL_REO_UPD_RX_QUEUE_INFO1_EVEN_PN			BIT(28)
2106 #define HAL_REO_UPD_RX_QUEUE_INFO1_UNEVEN_PN			BIT(29)
2107 #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_HANDLE_ENABLE		BIT(30)
2108 #define HAL_REO_UPD_RX_QUEUE_INFO1_IGNORE_AMPDU_FLG		BIT(31)
2109 
2110 #define HAL_REO_UPD_RX_QUEUE_INFO2_BA_WINDOW_SIZE		GENMASK(7, 0)
2111 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_SIZE			GENMASK(9, 8)
2112 #define HAL_REO_UPD_RX_QUEUE_INFO2_SVLD				BIT(10)
2113 #define HAL_REO_UPD_RX_QUEUE_INFO2_SSN				GENMASK(22, 11)
2114 #define HAL_REO_UPD_RX_QUEUE_INFO2_SEQ_2K_ERR			BIT(23)
2115 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_ERR			BIT(24)
2116 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_VALID			BIT(25)
2117 
2118 struct hal_reo_update_rx_queue {
2119 	struct hal_reo_cmd_hdr cmd;
2120 	u32 queue_addr_lo;
2121 	u32 info0;
2122 	u32 info1;
2123 	u32 info2;
2124 	u32 pn[4];
2125 } __packed;
2126 
2127 #define HAL_REO_UNBLOCK_CACHE_INFO0_UNBLK_CACHE		BIT(0)
2128 #define HAL_REO_UNBLOCK_CACHE_INFO0_RESOURCE_IDX	GENMASK(2, 1)
2129 
2130 struct hal_reo_unblock_cache {
2131 	struct hal_reo_cmd_hdr cmd;
2132 	u32 info0;
2133 	u32 rsvd[7];
2134 } __packed;
2135 
2136 enum hal_reo_exec_status {
2137 	HAL_REO_EXEC_STATUS_SUCCESS,
2138 	HAL_REO_EXEC_STATUS_BLOCKED,
2139 	HAL_REO_EXEC_STATUS_FAILED,
2140 	HAL_REO_EXEC_STATUS_RESOURCE_BLOCKED,
2141 };
2142 
2143 #define HAL_REO_STATUS_HDR_INFO0_STATUS_NUM	GENMASK(15, 0)
2144 #define HAL_REO_STATUS_HDR_INFO0_EXEC_TIME	GENMASK(25, 16)
2145 #define HAL_REO_STATUS_HDR_INFO0_EXEC_STATUS	GENMASK(27, 26)
2146 
2147 struct hal_reo_status_hdr {
2148 	u32 info0;
2149 	u32 timestamp;
2150 } __packed;
2151 
2152 /* hal_reo_status_hdr
2153  *		Producer: REO
2154  *		Consumer: SW
2155  *
2156  * status_num
2157  *		The value in this field is equal to value of the reo command
2158  *		number. This field helps to correlate the statuses with the REO
2159  *		commands.
2160  *
2161  * execution_time (in us)
2162  *		The amount of time REO took to excecute the command. Note that
2163  *		this time does not include the duration of the command waiting
2164  *		in the command ring, before the execution started.
2165  *
2166  * execution_status
2167  *		Execution status of the command. Values are defined in
2168  *		enum %HAL_REO_EXEC_STATUS_.
2169  */
2170 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_SSN		GENMASK(11, 0)
2171 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_CUR_IDX		GENMASK(19, 12)
2172 
2173 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MPDU_COUNT		GENMASK(6, 0)
2174 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MSDU_COUNT		GENMASK(31, 7)
2175 
2176 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_TIMEOUT_COUNT	GENMASK(9, 4)
2177 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_FDTB_COUNT		GENMASK(15, 10)
2178 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_DUPLICATE_COUNT	GENMASK(31, 16)
2179 
2180 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_FIO_COUNT		GENMASK(23, 0)
2181 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_BAR_RCVD_CNT	GENMASK(31, 24)
2182 
2183 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_LATE_RX_MPDU	GENMASK(11, 0)
2184 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_WINDOW_JMP2K	GENMASK(15, 12)
2185 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_HOLE_COUNT		GENMASK(31, 16)
2186 
2187 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO5_LOOPING_CNT	GENMASK(31, 28)
2188 
2189 struct hal_reo_get_queue_stats_status {
2190 	struct hal_reo_status_hdr hdr;
2191 	u32 info0;
2192 	u32 pn[4];
2193 	u32 last_rx_enqueue_timestamp;
2194 	u32 last_rx_dequeue_timestamp;
2195 	u32 rx_bitmap[8];
2196 	u32 info1;
2197 	u32 info2;
2198 	u32 info3;
2199 	u32 num_mpdu_frames;
2200 	u32 num_msdu_frames;
2201 	u32 total_bytes;
2202 	u32 info4;
2203 	u32 info5;
2204 } __packed;
2205 
2206 /* hal_reo_get_queue_stats_status
2207  *		Producer: REO
2208  *		Consumer: SW
2209  *
2210  * status_hdr
2211  *		Details that can link this status with the original command. It
2212  *		also contains info on how long REO took to execute this command.
2213  *
2214  * ssn
2215  *		Starting Sequence number of the session, this changes whenever
2216  *		window moves (can be filled by SW then maintained by REO).
2217  *
2218  * current_index
2219  *		Points to last forwarded packet.
2220  *
2221  * pn
2222  *		Bits of the PN number.
2223  *
2224  * last_rx_enqueue_timestamp
2225  * last_rx_dequeue_timestamp
2226  *		Timestamp of arrival of the last MPDU for this queue and
2227  *		Timestamp of forwarding an MPDU accordingly.
2228  *
2229  * rx_bitmap
2230  *		When a bit is set, the corresponding frame is currently held
2231  *		in the re-order queue. The bitmap  is Fully managed by HW.
2232  *
2233  * current_mpdu_count
2234  * current_msdu_count
2235  *		The number of MPDUs and MSDUs in the queue.
2236  *
2237  * timeout_count
2238  *		The number of times REO started forwarding frames even though
2239  *		there is a hole in the bitmap. Forwarding reason is timeout.
2240  *
2241  * forward_due_to_bar_count
2242  *		The number of times REO started forwarding frames even though
2243  *		there is a hole in the bitmap. Fwd reason is reception of BAR.
2244  *
2245  * duplicate_count
2246  *		The number of duplicate frames that have been detected.
2247  *
2248  * frames_in_order_count
2249  *		The number of frames that have been received in order (without
2250  *		a hole that prevented them from being forwarded immediately).
2251  *
2252  * bar_received_count
2253  *		The number of times a BAR frame is received.
2254  *
2255  * mpdu_frames_processed_count
2256  * msdu_frames_processed_count
2257  *		The total number of MPDU/MSDU frames that have been processed.
2258  *
2259  * total_bytes
2260  *		An approximation of the number of bytes received for this queue.
2261  *
2262  * late_receive_mpdu_count
2263  *		The number of MPDUs received after the window had already moved
2264  *		on. The 'late' sequence window is defined as
2265  *		(Window SSN - 256) - (Window SSN - 1).
2266  *
2267  * window_jump_2k
2268  *		The number of times the window moved more than 2K
2269  *
2270  * hole_count
2271  *		The number of times a hole was created in the receive bitmap.
2272  *
2273  * looping_count
2274  *		A count value that indicates the number of times the producer of
2275  *		entries into this Ring has looped around the ring.
2276  */
2277 
2278 #define HAL_REO_STATUS_LOOP_CNT			GENMASK(31, 28)
2279 
2280 #define HAL_REO_FLUSH_QUEUE_INFO0_ERR_DETECTED	BIT(0)
2281 #define HAL_REO_FLUSH_QUEUE_INFO0_RSVD		GENMASK(31, 1)
2282 #define HAL_REO_FLUSH_QUEUE_INFO1_RSVD		GENMASK(27, 0)
2283 
2284 struct hal_reo_flush_queue_status {
2285 	struct hal_reo_status_hdr hdr;
2286 	u32 info0;
2287 	u32 rsvd0[21];
2288 	u32 info1;
2289 } __packed;
2290 
2291 /* hal_reo_flush_queue_status
2292  *		Producer: REO
2293  *		Consumer: SW
2294  *
2295  * status_hdr
2296  *		Details that can link this status with the original command. It
2297  *		also contains info on how long REO took to execute this command.
2298  *
2299  * error_detected
2300  *		Status of blocking resource
2301  *
2302  *		0 - No error has been detected while executing this command
2303  *		1 - Error detected. The resource to be used for blocking was
2304  *		    already in use.
2305  *
2306  * looping_count
2307  *		A count value that indicates the number of times the producer of
2308  *		entries into this Ring has looped around the ring.
2309  */
2310 
2311 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_IS_ERR			BIT(0)
2312 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_BLOCK_ERR_CODE		GENMASK(2, 1)
2313 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_STATUS_HIT	BIT(8)
2314 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_DESC_TYPE	GENMASK(11, 9)
2315 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_CLIENT_ID	GENMASK(15, 12)
2316 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_ERR		GENMASK(17, 16)
2317 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_COUNT		GENMASK(25, 18)
2318 
2319 struct hal_reo_flush_cache_status {
2320 	struct hal_reo_status_hdr hdr;
2321 	u32 info0;
2322 	u32 rsvd0[21];
2323 	u32 info1;
2324 } __packed;
2325 
2326 /* hal_reo_flush_cache_status
2327  *		Producer: REO
2328  *		Consumer: SW
2329  *
2330  * status_hdr
2331  *		Details that can link this status with the original command. It
2332  *		also contains info on how long REO took to execute this command.
2333  *
2334  * error_detected
2335  *		Status for blocking resource handling
2336  *
2337  *		0 - No error has been detected while executing this command
2338  *		1 - An error in the blocking resource management was detected
2339  *
2340  * block_error_details
2341  *		only valid when error_detected is set
2342  *
2343  *		0 - No blocking related errors found
2344  *		1 - Blocking resource is already in use
2345  *		2 - Resource requested to be unblocked, was not blocked
2346  *
2347  * cache_controller_flush_status_hit
2348  *		The status that the cache controller returned on executing the
2349  *		flush command.
2350  *
2351  *		0 - miss; 1 - hit
2352  *
2353  * cache_controller_flush_status_desc_type
2354  *		Flush descriptor type
2355  *
2356  * cache_controller_flush_status_client_id
2357  *		Module who made the flush request
2358  *
2359  *		In REO, this is always 0
2360  *
2361  * cache_controller_flush_status_error
2362  *		Error condition
2363  *
2364  *		0 - No error found
2365  *		1 - HW interface is still busy
2366  *		2 - Line currently locked. Used for one line flush command
2367  *		3 - At least one line is still locked.
2368  *		    Used for cache flush command.
2369  *
2370  * cache_controller_flush_count
2371  *		The number of lines that were actually flushed out
2372  *
2373  * looping_count
2374  *		A count value that indicates the number of times the producer of
2375  *		entries into this Ring has looped around the ring.
2376  */
2377 
2378 #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_IS_ERR	BIT(0)
2379 #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_TYPE		BIT(1)
2380 
2381 struct hal_reo_unblock_cache_status {
2382 	struct hal_reo_status_hdr hdr;
2383 	u32 info0;
2384 	u32 rsvd0[21];
2385 	u32 info1;
2386 } __packed;
2387 
2388 /* hal_reo_unblock_cache_status
2389  *		Producer: REO
2390  *		Consumer: SW
2391  *
2392  * status_hdr
2393  *		Details that can link this status with the original command. It
2394  *		also contains info on how long REO took to execute this command.
2395  *
2396  * error_detected
2397  *		0 - No error has been detected while executing this command
2398  *		1 - The blocking resource was not in use, and therefore it could
2399  *		    not be unblocked.
2400  *
2401  * unblock_type
2402  *		Reference to the type of unblock command
2403  *		0 - Unblock a blocking resource
2404  *		1 - The entire cache usage is unblock
2405  *
2406  * looping_count
2407  *		A count value that indicates the number of times the producer of
2408  *		entries into this Ring has looped around the ring.
2409  */
2410 
2411 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_IS_ERR		BIT(0)
2412 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_LIST_EMPTY		BIT(1)
2413 
2414 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_REL_DESC_COUNT	GENMASK(15, 0)
2415 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_FWD_BUF_COUNT	GENMASK(31, 16)
2416 
2417 struct hal_reo_flush_timeout_list_status {
2418 	struct hal_reo_status_hdr hdr;
2419 	u32 info0;
2420 	u32 info1;
2421 	u32 rsvd0[20];
2422 	u32 info2;
2423 } __packed;
2424 
2425 /* hal_reo_flush_timeout_list_status
2426  *		Producer: REO
2427  *		Consumer: SW
2428  *
2429  * status_hdr
2430  *		Details that can link this status with the original command. It
2431  *		also contains info on how long REO took to execute this command.
2432  *
2433  * error_detected
2434  *		0 - No error has been detected while executing this command
2435  *		1 - Command not properly executed and returned with error
2436  *
2437  * timeout_list_empty
2438  *		When set, REO has depleted the timeout list and all entries are
2439  *		gone.
2440  *
2441  * release_desc_count
2442  *		Producer: SW; Consumer: REO
2443  *		The number of link descriptor released
2444  *
2445  * forward_buf_count
2446  *		Producer: SW; Consumer: REO
2447  *		The number of buffers forwarded to the REO destination rings
2448  *
2449  * looping_count
2450  *		A count value that indicates the number of times the producer of
2451  *		entries into this Ring has looped around the ring.
2452  */
2453 
2454 #define HAL_REO_DESC_THRESH_STATUS_INFO0_THRESH_INDEX		GENMASK(1, 0)
2455 #define HAL_REO_DESC_THRESH_STATUS_INFO1_LINK_DESC_COUNTER0	GENMASK(23, 0)
2456 #define HAL_REO_DESC_THRESH_STATUS_INFO2_LINK_DESC_COUNTER1	GENMASK(23, 0)
2457 #define HAL_REO_DESC_THRESH_STATUS_INFO3_LINK_DESC_COUNTER2	GENMASK(23, 0)
2458 #define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM	GENMASK(25, 0)
2459 
2460 struct hal_reo_desc_thresh_reached_status {
2461 	struct hal_reo_status_hdr hdr;
2462 	u32 info0;
2463 	u32 info1;
2464 	u32 info2;
2465 	u32 info3;
2466 	u32 info4;
2467 	u32 rsvd0[17];
2468 	u32 info5;
2469 } __packed;
2470 
2471 /* hal_reo_desc_thresh_reached_status
2472  *		Producer: REO
2473  *		Consumer: SW
2474  *
2475  * status_hdr
2476  *		Details that can link this status with the original command. It
2477  *		also contains info on how long REO took to execute this command.
2478  *
2479  * threshold_index
2480  *		The index of the threshold register whose value got reached
2481  *
2482  * link_descriptor_counter0
2483  * link_descriptor_counter1
2484  * link_descriptor_counter2
2485  * link_descriptor_counter_sum
2486  *		Value of the respective counters at generation of this message
2487  *
2488  * looping_count
2489  *		A count value that indicates the number of times the producer of
2490  *		entries into this Ring has looped around the ring.
2491  */
2492 
2493 #endif /* ATH11K_HAL_DESC_H */
2494