xref: /openbmc/linux/drivers/net/wireless/ath/ath11k/ce.h (revision 15e3ae36)
1 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
2 /*
3  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
4  */
5 
6 #ifndef ATH11K_CE_H
7 #define ATH11K_CE_H
8 
9 #define CE_COUNT 12
10 
11 /* Byte swap data words */
12 #define CE_ATTR_BYTE_SWAP_DATA 2
13 
14 /* no interrupt on copy completion */
15 #define CE_ATTR_DIS_INTR		8
16 
17 /* Host software's Copy Engine configuration. */
18 #ifdef __BIG_ENDIAN
19 #define CE_ATTR_FLAGS CE_ATTR_BYTE_SWAP_DATA
20 #else
21 #define CE_ATTR_FLAGS 0
22 #endif
23 
24 /* Threshold to poll for tx completion in case of Interrupt disabled CE's */
25 #define ATH11K_CE_USAGE_THRESHOLD 32
26 
27 void ath11k_ce_byte_swap(void *mem, u32 len);
28 
29 /*
30  * Directions for interconnect pipe configuration.
31  * These definitions may be used during configuration and are shared
32  * between Host and Target.
33  *
34  * Pipe Directions are relative to the Host, so PIPEDIR_IN means
35  * "coming IN over air through Target to Host" as with a WiFi Rx operation.
36  * Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air"
37  * as with a WiFi Tx operation. This is somewhat awkward for the "middle-man"
38  * Target since things that are "PIPEDIR_OUT" are coming IN to the Target
39  * over the interconnect.
40  */
41 #define PIPEDIR_NONE		0
42 #define PIPEDIR_IN		1 /* Target-->Host, WiFi Rx direction */
43 #define PIPEDIR_OUT		2 /* Host->Target, WiFi Tx direction */
44 #define PIPEDIR_INOUT		3 /* bidirectional */
45 #define PIPEDIR_INOUT_H2H	4 /* bidirectional, host to host */
46 
47 /* CE address/mask */
48 #define CE_HOST_IE_ADDRESS	0x00A1803C
49 #define CE_HOST_IE_2_ADDRESS	0x00A18040
50 #define CE_HOST_IE_3_ADDRESS	CE_HOST_IE_ADDRESS
51 
52 #define CE_HOST_IE_3_SHIFT	0xC
53 
54 #define CE_RING_IDX_INCR(nentries_mask, idx) (((idx) + 1) & (nentries_mask))
55 
56 #define ATH11K_CE_RX_POST_RETRY_JIFFIES 50
57 
58 struct ath11k_base;
59 
60 /*
61  * Establish a mapping between a service/direction and a pipe.
62  * Configuration information for a Copy Engine pipe and services.
63  * Passed from Host to Target through QMI message and must be in
64  * little endian format.
65  */
66 struct service_to_pipe {
67 	__le32 service_id;
68 	__le32 pipedir;
69 	__le32 pipenum;
70 };
71 
72 /*
73  * Configuration information for a Copy Engine pipe.
74  * Passed from Host to Target through QMI message during startup (one per CE).
75  *
76  * NOTE: Structure is shared between Host software and Target firmware!
77  */
78 struct ce_pipe_config {
79 	__le32 pipenum;
80 	__le32 pipedir;
81 	__le32 nentries;
82 	__le32 nbytes_max;
83 	__le32 flags;
84 	__le32 reserved;
85 };
86 
87 struct ce_attr {
88 	/* CE_ATTR_* values */
89 	unsigned int flags;
90 
91 	/* #entries in source ring - Must be a power of 2 */
92 	unsigned int src_nentries;
93 
94 	/*
95 	 * Max source send size for this CE.
96 	 * This is also the minimum size of a destination buffer.
97 	 */
98 	unsigned int src_sz_max;
99 
100 	/* #entries in destination ring - Must be a power of 2 */
101 	unsigned int dest_nentries;
102 
103 	void (*recv_cb)(struct ath11k_base *, struct sk_buff *);
104 };
105 
106 #define CE_DESC_RING_ALIGN 8
107 
108 struct ath11k_ce_ring {
109 	/* Number of entries in this ring; must be power of 2 */
110 	unsigned int nentries;
111 	unsigned int nentries_mask;
112 
113 	/* For dest ring, this is the next index to be processed
114 	 * by software after it was/is received into.
115 	 *
116 	 * For src ring, this is the last descriptor that was sent
117 	 * and completion processed by software.
118 	 *
119 	 * Regardless of src or dest ring, this is an invariant
120 	 * (modulo ring size):
121 	 *     write index >= read index >= sw_index
122 	 */
123 	unsigned int sw_index;
124 	/* cached copy */
125 	unsigned int write_index;
126 
127 	/* Start of DMA-coherent area reserved for descriptors */
128 	/* Host address space */
129 	void *base_addr_owner_space_unaligned;
130 	/* CE address space */
131 	u32 base_addr_ce_space_unaligned;
132 
133 	/* Actual start of descriptors.
134 	 * Aligned to descriptor-size boundary.
135 	 * Points into reserved DMA-coherent area, above.
136 	 */
137 	/* Host address space */
138 	void *base_addr_owner_space;
139 
140 	/* CE address space */
141 	u32 base_addr_ce_space;
142 
143 	/* HAL ring id */
144 	u32 hal_ring_id;
145 
146 	/* keep last */
147 	struct sk_buff *skb[0];
148 };
149 
150 struct ath11k_ce_pipe {
151 	struct ath11k_base *ab;
152 	u16 pipe_num;
153 	unsigned int attr_flags;
154 	unsigned int buf_sz;
155 	unsigned int rx_buf_needed;
156 
157 	void (*send_cb)(struct ath11k_ce_pipe *);
158 	void (*recv_cb)(struct ath11k_base *, struct sk_buff *);
159 
160 	struct tasklet_struct intr_tq;
161 	struct ath11k_ce_ring *src_ring;
162 	struct ath11k_ce_ring *dest_ring;
163 	struct ath11k_ce_ring *status_ring;
164 	u64 timestamp;
165 };
166 
167 struct ath11k_ce {
168 	struct ath11k_ce_pipe ce_pipe[CE_COUNT];
169 	/* Protects rings of all ce pipes */
170 	spinlock_t ce_lock;
171 };
172 
173 void ath11k_ce_cleanup_pipes(struct ath11k_base *ab);
174 void ath11k_ce_rx_replenish_retry(struct timer_list *t);
175 void ath11k_ce_per_engine_service(struct ath11k_base *ab, u16 ce_id);
176 int ath11k_ce_send(struct ath11k_base *ab, struct sk_buff *skb, u8 pipe_id,
177 		   u16 transfer_id);
178 void ath11k_ce_rx_post_buf(struct ath11k_base *ab);
179 int ath11k_ce_init_pipes(struct ath11k_base *ab);
180 int ath11k_ce_alloc_pipes(struct ath11k_base *ab);
181 void ath11k_ce_free_pipes(struct ath11k_base *ab);
182 int ath11k_ce_get_attr_flags(int ce_id);
183 void ath11k_ce_poll_send_completed(struct ath11k_base *ab, u8 pipe_id);
184 #endif
185