1 /* SPDX-License-Identifier: ISC */ 2 /* 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. 6 */ 7 8 #ifndef _WMI_H_ 9 #define _WMI_H_ 10 11 #include <linux/types.h> 12 #include <linux/ieee80211.h> 13 14 /* 15 * This file specifies the WMI interface for the Unified Software 16 * Architecture. 17 * 18 * It includes definitions of all the commands and events. Commands are 19 * messages from the host to the target. Events and Replies are messages 20 * from the target to the host. 21 * 22 * Ownership of correctness in regards to WMI commands belongs to the host 23 * driver and the target is not required to validate parameters for value, 24 * proper range, or any other checking. 25 * 26 * Guidelines for extending this interface are below. 27 * 28 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 29 * 30 * 2. Use ONLY u32 type for defining member variables within WMI 31 * command/event structures. Do not use u8, u16, bool or 32 * enum types within these structures. 33 * 34 * 3. DO NOT define bit fields within structures. Implement bit fields 35 * using masks if necessary. Do not use the programming language's bit 36 * field definition. 37 * 38 * 4. Define macros for encode/decode of u8, u16 fields within 39 * the u32 variables. Use these macros for set/get of these fields. 40 * Try to use this to optimize the structure without bloating it with 41 * u32 variables for every lower sized field. 42 * 43 * 5. Do not use PACK/UNPACK attributes for the structures as each member 44 * variable is already 4-byte aligned by virtue of being a u32 45 * type. 46 * 47 * 6. Comment each parameter part of the WMI command/event structure by 48 * using the 2 stars at the beginning of C comment instead of one star to 49 * enable HTML document generation using Doxygen. 50 * 51 */ 52 53 /* Control Path */ 54 struct wmi_cmd_hdr { 55 __le32 cmd_id; 56 } __packed; 57 58 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 59 #define WMI_CMD_HDR_CMD_ID_LSB 0 60 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 61 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 62 63 #define HTC_PROTOCOL_VERSION 0x0002 64 #define WMI_PROTOCOL_VERSION 0x0002 65 66 /* 67 * There is no signed version of __le32, so for a temporary solution come 68 * up with our own version. The idea is from fs/ntfs/endian.h. 69 * 70 * Use a_ prefix so that it doesn't conflict if we get proper support to 71 * linux/types.h. 72 */ 73 typedef __s32 __bitwise a_sle32; 74 75 static inline a_sle32 a_cpu_to_sle32(s32 val) 76 { 77 return (__force a_sle32)cpu_to_le32(val); 78 } 79 80 static inline s32 a_sle32_to_cpu(a_sle32 val) 81 { 82 return le32_to_cpu((__force __le32)val); 83 } 84 85 enum wmi_service { 86 WMI_SERVICE_BEACON_OFFLOAD = 0, 87 WMI_SERVICE_SCAN_OFFLOAD, 88 WMI_SERVICE_ROAM_OFFLOAD, 89 WMI_SERVICE_BCN_MISS_OFFLOAD, 90 WMI_SERVICE_STA_PWRSAVE, 91 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 92 WMI_SERVICE_AP_UAPSD, 93 WMI_SERVICE_AP_DFS, 94 WMI_SERVICE_11AC, 95 WMI_SERVICE_BLOCKACK, 96 WMI_SERVICE_PHYERR, 97 WMI_SERVICE_BCN_FILTER, 98 WMI_SERVICE_RTT, 99 WMI_SERVICE_RATECTRL, 100 WMI_SERVICE_WOW, 101 WMI_SERVICE_RATECTRL_CACHE, 102 WMI_SERVICE_IRAM_TIDS, 103 WMI_SERVICE_ARPNS_OFFLOAD, 104 WMI_SERVICE_NLO, 105 WMI_SERVICE_GTK_OFFLOAD, 106 WMI_SERVICE_SCAN_SCH, 107 WMI_SERVICE_CSA_OFFLOAD, 108 WMI_SERVICE_CHATTER, 109 WMI_SERVICE_COEX_FREQAVOID, 110 WMI_SERVICE_PACKET_POWER_SAVE, 111 WMI_SERVICE_FORCE_FW_HANG, 112 WMI_SERVICE_GPIO, 113 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 114 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 115 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 116 WMI_SERVICE_STA_KEEP_ALIVE, 117 WMI_SERVICE_TX_ENCAP, 118 WMI_SERVICE_BURST, 119 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 120 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 121 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 122 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 123 WMI_SERVICE_EARLY_RX, 124 WMI_SERVICE_STA_SMPS, 125 WMI_SERVICE_FWTEST, 126 WMI_SERVICE_STA_WMMAC, 127 WMI_SERVICE_TDLS, 128 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 129 WMI_SERVICE_ADAPTIVE_OCS, 130 WMI_SERVICE_BA_SSN_SUPPORT, 131 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 132 WMI_SERVICE_WLAN_HB, 133 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 134 WMI_SERVICE_BATCH_SCAN, 135 WMI_SERVICE_QPOWER, 136 WMI_SERVICE_PLMREQ, 137 WMI_SERVICE_THERMAL_MGMT, 138 WMI_SERVICE_RMC, 139 WMI_SERVICE_MHF_OFFLOAD, 140 WMI_SERVICE_COEX_SAR, 141 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 142 WMI_SERVICE_NAN, 143 WMI_SERVICE_L1SS_STAT, 144 WMI_SERVICE_ESTIMATE_LINKSPEED, 145 WMI_SERVICE_OBSS_SCAN, 146 WMI_SERVICE_TDLS_OFFCHAN, 147 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 148 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 149 WMI_SERVICE_IBSS_PWRSAVE, 150 WMI_SERVICE_LPASS, 151 WMI_SERVICE_EXTSCAN, 152 WMI_SERVICE_D0WOW, 153 WMI_SERVICE_HSOFFLOAD, 154 WMI_SERVICE_ROAM_HO_OFFLOAD, 155 WMI_SERVICE_RX_FULL_REORDER, 156 WMI_SERVICE_DHCP_OFFLOAD, 157 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 158 WMI_SERVICE_MDNS_OFFLOAD, 159 WMI_SERVICE_SAP_AUTH_OFFLOAD, 160 WMI_SERVICE_ATF, 161 WMI_SERVICE_COEX_GPIO, 162 WMI_SERVICE_ENHANCED_PROXY_STA, 163 WMI_SERVICE_TT, 164 WMI_SERVICE_PEER_CACHING, 165 WMI_SERVICE_AUX_SPECTRAL_INTF, 166 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 167 WMI_SERVICE_BSS_CHANNEL_INFO_64, 168 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 169 WMI_SERVICE_MESH_11S, 170 WMI_SERVICE_MESH_NON_11S, 171 WMI_SERVICE_PEER_STATS, 172 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 173 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 174 WMI_SERVICE_TX_MODE_PUSH_ONLY, 175 WMI_SERVICE_TX_MODE_PUSH_PULL, 176 WMI_SERVICE_TX_MODE_DYNAMIC, 177 WMI_SERVICE_VDEV_RX_FILTER, 178 WMI_SERVICE_BTCOEX, 179 WMI_SERVICE_CHECK_CAL_VERSION, 180 WMI_SERVICE_DBGLOG_WARN2, 181 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 182 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 183 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 184 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 185 WMI_SERVICE_SMART_LOGGING_SUPPORT, 186 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 187 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 188 WMI_SERVICE_MGMT_TX_WMI, 189 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 190 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 191 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, 192 WMI_SERVICE_TPC_STATS_FINAL, 193 WMI_SERVICE_RESET_CHIP, 194 WMI_SERVICE_SPOOF_MAC_SUPPORT, 195 WMI_SERVICE_TX_DATA_ACK_RSSI, 196 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 197 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 198 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, 199 WMI_SERVICE_THERM_THROT, 200 WMI_SERVICE_RTT_RESPONDER_ROLE, 201 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, 202 WMI_SERVICE_REPORT_AIRTIME, 203 WMI_SERVICE_SYNC_DELETE_CMDS, 204 WMI_SERVICE_TX_PWR_PER_PEER, 205 WMI_SERVICE_SUPPORT_EXTEND_ADDRESS, 206 207 /* Remember to add the new value to wmi_service_name()! */ 208 209 /* keep last */ 210 WMI_SERVICE_MAX, 211 }; 212 213 enum wmi_10x_service { 214 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 215 WMI_10X_SERVICE_SCAN_OFFLOAD, 216 WMI_10X_SERVICE_ROAM_OFFLOAD, 217 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 218 WMI_10X_SERVICE_STA_PWRSAVE, 219 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 220 WMI_10X_SERVICE_AP_UAPSD, 221 WMI_10X_SERVICE_AP_DFS, 222 WMI_10X_SERVICE_11AC, 223 WMI_10X_SERVICE_BLOCKACK, 224 WMI_10X_SERVICE_PHYERR, 225 WMI_10X_SERVICE_BCN_FILTER, 226 WMI_10X_SERVICE_RTT, 227 WMI_10X_SERVICE_RATECTRL, 228 WMI_10X_SERVICE_WOW, 229 WMI_10X_SERVICE_RATECTRL_CACHE, 230 WMI_10X_SERVICE_IRAM_TIDS, 231 WMI_10X_SERVICE_BURST, 232 233 /* introduced in 10.2 */ 234 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 235 WMI_10X_SERVICE_FORCE_FW_HANG, 236 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 237 WMI_10X_SERVICE_ATF, 238 WMI_10X_SERVICE_COEX_GPIO, 239 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 240 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 241 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 242 WMI_10X_SERVICE_MESH, 243 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 244 WMI_10X_SERVICE_PEER_STATS, 245 WMI_10X_SERVICE_RESET_CHIP, 246 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 247 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL, 248 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 249 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 250 }; 251 252 enum wmi_main_service { 253 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 254 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 255 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 256 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 257 WMI_MAIN_SERVICE_STA_PWRSAVE, 258 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 259 WMI_MAIN_SERVICE_AP_UAPSD, 260 WMI_MAIN_SERVICE_AP_DFS, 261 WMI_MAIN_SERVICE_11AC, 262 WMI_MAIN_SERVICE_BLOCKACK, 263 WMI_MAIN_SERVICE_PHYERR, 264 WMI_MAIN_SERVICE_BCN_FILTER, 265 WMI_MAIN_SERVICE_RTT, 266 WMI_MAIN_SERVICE_RATECTRL, 267 WMI_MAIN_SERVICE_WOW, 268 WMI_MAIN_SERVICE_RATECTRL_CACHE, 269 WMI_MAIN_SERVICE_IRAM_TIDS, 270 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 271 WMI_MAIN_SERVICE_NLO, 272 WMI_MAIN_SERVICE_GTK_OFFLOAD, 273 WMI_MAIN_SERVICE_SCAN_SCH, 274 WMI_MAIN_SERVICE_CSA_OFFLOAD, 275 WMI_MAIN_SERVICE_CHATTER, 276 WMI_MAIN_SERVICE_COEX_FREQAVOID, 277 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 278 WMI_MAIN_SERVICE_FORCE_FW_HANG, 279 WMI_MAIN_SERVICE_GPIO, 280 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 281 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 282 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 283 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 284 WMI_MAIN_SERVICE_TX_ENCAP, 285 }; 286 287 enum wmi_10_4_service { 288 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 289 WMI_10_4_SERVICE_SCAN_OFFLOAD, 290 WMI_10_4_SERVICE_ROAM_OFFLOAD, 291 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 292 WMI_10_4_SERVICE_STA_PWRSAVE, 293 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 294 WMI_10_4_SERVICE_AP_UAPSD, 295 WMI_10_4_SERVICE_AP_DFS, 296 WMI_10_4_SERVICE_11AC, 297 WMI_10_4_SERVICE_BLOCKACK, 298 WMI_10_4_SERVICE_PHYERR, 299 WMI_10_4_SERVICE_BCN_FILTER, 300 WMI_10_4_SERVICE_RTT, 301 WMI_10_4_SERVICE_RATECTRL, 302 WMI_10_4_SERVICE_WOW, 303 WMI_10_4_SERVICE_RATECTRL_CACHE, 304 WMI_10_4_SERVICE_IRAM_TIDS, 305 WMI_10_4_SERVICE_BURST, 306 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 307 WMI_10_4_SERVICE_GTK_OFFLOAD, 308 WMI_10_4_SERVICE_SCAN_SCH, 309 WMI_10_4_SERVICE_CSA_OFFLOAD, 310 WMI_10_4_SERVICE_CHATTER, 311 WMI_10_4_SERVICE_COEX_FREQAVOID, 312 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 313 WMI_10_4_SERVICE_FORCE_FW_HANG, 314 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 315 WMI_10_4_SERVICE_GPIO, 316 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 317 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 318 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 319 WMI_10_4_SERVICE_TX_ENCAP, 320 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 321 WMI_10_4_SERVICE_EARLY_RX, 322 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 323 WMI_10_4_SERVICE_TT, 324 WMI_10_4_SERVICE_ATF, 325 WMI_10_4_SERVICE_PEER_CACHING, 326 WMI_10_4_SERVICE_COEX_GPIO, 327 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 328 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 329 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 330 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 331 WMI_10_4_SERVICE_MESH_NON_11S, 332 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 333 WMI_10_4_SERVICE_PEER_STATS, 334 WMI_10_4_SERVICE_MESH_11S, 335 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 336 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 337 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 338 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 339 WMI_10_4_SERVICE_VDEV_RX_FILTER, 340 WMI_10_4_SERVICE_BTCOEX, 341 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 342 WMI_10_4_SERVICE_DBGLOG_WARN2, 343 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 344 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 345 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 346 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 347 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 348 WMI_10_4_SERVICE_TDLS, 349 WMI_10_4_SERVICE_TDLS_OFFCHAN, 350 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 351 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 352 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 353 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 354 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 355 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 356 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 357 WMI_10_4_SERVICE_TPC_STATS_FINAL, 358 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, 359 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 360 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, 361 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 362 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, 363 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, 364 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 365 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT, 366 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS, 367 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 368 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE, 369 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT, 370 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 371 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, 372 WMI_10_4_SERVICE_REPORT_AIRTIME, 373 WMI_10_4_SERVICE_TX_PWR_PER_PEER, 374 }; 375 376 static inline char *wmi_service_name(enum wmi_service service_id) 377 { 378 #define SVCSTR(x) case x: return #x 379 380 switch (service_id) { 381 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 382 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 383 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 384 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 385 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 386 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 387 SVCSTR(WMI_SERVICE_AP_UAPSD); 388 SVCSTR(WMI_SERVICE_AP_DFS); 389 SVCSTR(WMI_SERVICE_11AC); 390 SVCSTR(WMI_SERVICE_BLOCKACK); 391 SVCSTR(WMI_SERVICE_PHYERR); 392 SVCSTR(WMI_SERVICE_BCN_FILTER); 393 SVCSTR(WMI_SERVICE_RTT); 394 SVCSTR(WMI_SERVICE_RATECTRL); 395 SVCSTR(WMI_SERVICE_WOW); 396 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 397 SVCSTR(WMI_SERVICE_IRAM_TIDS); 398 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 399 SVCSTR(WMI_SERVICE_NLO); 400 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 401 SVCSTR(WMI_SERVICE_SCAN_SCH); 402 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 403 SVCSTR(WMI_SERVICE_CHATTER); 404 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 405 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 406 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 407 SVCSTR(WMI_SERVICE_GPIO); 408 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 409 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 410 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 411 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 412 SVCSTR(WMI_SERVICE_TX_ENCAP); 413 SVCSTR(WMI_SERVICE_BURST); 414 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 415 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 416 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 417 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 418 SVCSTR(WMI_SERVICE_EARLY_RX); 419 SVCSTR(WMI_SERVICE_STA_SMPS); 420 SVCSTR(WMI_SERVICE_FWTEST); 421 SVCSTR(WMI_SERVICE_STA_WMMAC); 422 SVCSTR(WMI_SERVICE_TDLS); 423 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 424 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 425 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 426 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 427 SVCSTR(WMI_SERVICE_WLAN_HB); 428 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 429 SVCSTR(WMI_SERVICE_BATCH_SCAN); 430 SVCSTR(WMI_SERVICE_QPOWER); 431 SVCSTR(WMI_SERVICE_PLMREQ); 432 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 433 SVCSTR(WMI_SERVICE_RMC); 434 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 435 SVCSTR(WMI_SERVICE_COEX_SAR); 436 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 437 SVCSTR(WMI_SERVICE_NAN); 438 SVCSTR(WMI_SERVICE_L1SS_STAT); 439 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 440 SVCSTR(WMI_SERVICE_OBSS_SCAN); 441 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 442 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 443 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 444 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 445 SVCSTR(WMI_SERVICE_LPASS); 446 SVCSTR(WMI_SERVICE_EXTSCAN); 447 SVCSTR(WMI_SERVICE_D0WOW); 448 SVCSTR(WMI_SERVICE_HSOFFLOAD); 449 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 450 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 451 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 452 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 453 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 454 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 455 SVCSTR(WMI_SERVICE_ATF); 456 SVCSTR(WMI_SERVICE_COEX_GPIO); 457 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 458 SVCSTR(WMI_SERVICE_TT); 459 SVCSTR(WMI_SERVICE_PEER_CACHING); 460 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 461 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 462 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 463 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 464 SVCSTR(WMI_SERVICE_MESH_11S); 465 SVCSTR(WMI_SERVICE_MESH_NON_11S); 466 SVCSTR(WMI_SERVICE_PEER_STATS); 467 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 468 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 469 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 470 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 471 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 472 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 473 SVCSTR(WMI_SERVICE_BTCOEX); 474 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 475 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 476 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 477 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 478 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 479 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 480 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 481 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 482 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 483 SVCSTR(WMI_SERVICE_MGMT_TX_WMI); 484 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 485 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); 486 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); 487 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); 488 SVCSTR(WMI_SERVICE_RESET_CHIP); 489 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT); 490 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); 491 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); 492 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT); 493 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT); 494 SVCSTR(WMI_SERVICE_THERM_THROT); 495 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE); 496 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT); 497 SVCSTR(WMI_SERVICE_REPORT_AIRTIME); 498 SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS); 499 SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER); 500 SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS); 501 502 case WMI_SERVICE_MAX: 503 return NULL; 504 } 505 506 #undef SVCSTR 507 508 return NULL; 509 } 510 511 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 512 ((svc_id) < (len) && \ 513 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 514 BIT((svc_id) % (sizeof(u32)))) 515 516 /* This extension is required to accommodate new services, current limit 517 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 518 * wmi_service word. Extending this to make use of remaining unused bits 519 * for new services. 520 */ 521 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 522 ((svc_id) >= (len) && \ 523 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 524 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 525 526 #define SVCMAP(x, y, len) \ 527 do { \ 528 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 529 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 530 __set_bit(y, out); \ 531 } while (0) 532 533 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 534 size_t len) 535 { 536 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 537 WMI_SERVICE_BEACON_OFFLOAD, len); 538 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 539 WMI_SERVICE_SCAN_OFFLOAD, len); 540 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 541 WMI_SERVICE_ROAM_OFFLOAD, len); 542 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 543 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 544 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 545 WMI_SERVICE_STA_PWRSAVE, len); 546 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 547 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 548 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 549 WMI_SERVICE_AP_UAPSD, len); 550 SVCMAP(WMI_10X_SERVICE_AP_DFS, 551 WMI_SERVICE_AP_DFS, len); 552 SVCMAP(WMI_10X_SERVICE_11AC, 553 WMI_SERVICE_11AC, len); 554 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 555 WMI_SERVICE_BLOCKACK, len); 556 SVCMAP(WMI_10X_SERVICE_PHYERR, 557 WMI_SERVICE_PHYERR, len); 558 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 559 WMI_SERVICE_BCN_FILTER, len); 560 SVCMAP(WMI_10X_SERVICE_RTT, 561 WMI_SERVICE_RTT, len); 562 SVCMAP(WMI_10X_SERVICE_RATECTRL, 563 WMI_SERVICE_RATECTRL, len); 564 SVCMAP(WMI_10X_SERVICE_WOW, 565 WMI_SERVICE_WOW, len); 566 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 567 WMI_SERVICE_RATECTRL_CACHE, len); 568 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 569 WMI_SERVICE_IRAM_TIDS, len); 570 SVCMAP(WMI_10X_SERVICE_BURST, 571 WMI_SERVICE_BURST, len); 572 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 573 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 574 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 575 WMI_SERVICE_FORCE_FW_HANG, len); 576 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 577 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 578 SVCMAP(WMI_10X_SERVICE_ATF, 579 WMI_SERVICE_ATF, len); 580 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 581 WMI_SERVICE_COEX_GPIO, len); 582 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 583 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 584 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 585 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 586 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 587 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 588 SVCMAP(WMI_10X_SERVICE_MESH, 589 WMI_SERVICE_MESH_11S, len); 590 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 591 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 592 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 593 WMI_SERVICE_PEER_STATS, len); 594 SVCMAP(WMI_10X_SERVICE_RESET_CHIP, 595 WMI_SERVICE_RESET_CHIP, len); 596 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 597 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 598 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 599 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len); 600 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 601 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 602 } 603 604 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 605 size_t len) 606 { 607 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 608 WMI_SERVICE_BEACON_OFFLOAD, len); 609 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 610 WMI_SERVICE_SCAN_OFFLOAD, len); 611 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 612 WMI_SERVICE_ROAM_OFFLOAD, len); 613 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 614 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 615 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 616 WMI_SERVICE_STA_PWRSAVE, len); 617 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 618 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 619 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 620 WMI_SERVICE_AP_UAPSD, len); 621 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 622 WMI_SERVICE_AP_DFS, len); 623 SVCMAP(WMI_MAIN_SERVICE_11AC, 624 WMI_SERVICE_11AC, len); 625 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 626 WMI_SERVICE_BLOCKACK, len); 627 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 628 WMI_SERVICE_PHYERR, len); 629 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 630 WMI_SERVICE_BCN_FILTER, len); 631 SVCMAP(WMI_MAIN_SERVICE_RTT, 632 WMI_SERVICE_RTT, len); 633 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 634 WMI_SERVICE_RATECTRL, len); 635 SVCMAP(WMI_MAIN_SERVICE_WOW, 636 WMI_SERVICE_WOW, len); 637 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 638 WMI_SERVICE_RATECTRL_CACHE, len); 639 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 640 WMI_SERVICE_IRAM_TIDS, len); 641 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 642 WMI_SERVICE_ARPNS_OFFLOAD, len); 643 SVCMAP(WMI_MAIN_SERVICE_NLO, 644 WMI_SERVICE_NLO, len); 645 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 646 WMI_SERVICE_GTK_OFFLOAD, len); 647 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 648 WMI_SERVICE_SCAN_SCH, len); 649 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 650 WMI_SERVICE_CSA_OFFLOAD, len); 651 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 652 WMI_SERVICE_CHATTER, len); 653 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 654 WMI_SERVICE_COEX_FREQAVOID, len); 655 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 656 WMI_SERVICE_PACKET_POWER_SAVE, len); 657 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 658 WMI_SERVICE_FORCE_FW_HANG, len); 659 SVCMAP(WMI_MAIN_SERVICE_GPIO, 660 WMI_SERVICE_GPIO, len); 661 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 662 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 663 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 664 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 665 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 666 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 667 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 668 WMI_SERVICE_STA_KEEP_ALIVE, len); 669 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 670 WMI_SERVICE_TX_ENCAP, len); 671 } 672 673 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 674 size_t len) 675 { 676 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 677 WMI_SERVICE_BEACON_OFFLOAD, len); 678 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 679 WMI_SERVICE_SCAN_OFFLOAD, len); 680 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 681 WMI_SERVICE_ROAM_OFFLOAD, len); 682 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 683 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 684 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 685 WMI_SERVICE_STA_PWRSAVE, len); 686 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 687 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 688 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 689 WMI_SERVICE_AP_UAPSD, len); 690 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 691 WMI_SERVICE_AP_DFS, len); 692 SVCMAP(WMI_10_4_SERVICE_11AC, 693 WMI_SERVICE_11AC, len); 694 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 695 WMI_SERVICE_BLOCKACK, len); 696 SVCMAP(WMI_10_4_SERVICE_PHYERR, 697 WMI_SERVICE_PHYERR, len); 698 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 699 WMI_SERVICE_BCN_FILTER, len); 700 SVCMAP(WMI_10_4_SERVICE_RTT, 701 WMI_SERVICE_RTT, len); 702 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 703 WMI_SERVICE_RATECTRL, len); 704 SVCMAP(WMI_10_4_SERVICE_WOW, 705 WMI_SERVICE_WOW, len); 706 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 707 WMI_SERVICE_RATECTRL_CACHE, len); 708 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 709 WMI_SERVICE_IRAM_TIDS, len); 710 SVCMAP(WMI_10_4_SERVICE_BURST, 711 WMI_SERVICE_BURST, len); 712 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 713 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 714 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 715 WMI_SERVICE_GTK_OFFLOAD, len); 716 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 717 WMI_SERVICE_SCAN_SCH, len); 718 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 719 WMI_SERVICE_CSA_OFFLOAD, len); 720 SVCMAP(WMI_10_4_SERVICE_CHATTER, 721 WMI_SERVICE_CHATTER, len); 722 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 723 WMI_SERVICE_COEX_FREQAVOID, len); 724 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 725 WMI_SERVICE_PACKET_POWER_SAVE, len); 726 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 727 WMI_SERVICE_FORCE_FW_HANG, len); 728 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 729 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 730 SVCMAP(WMI_10_4_SERVICE_GPIO, 731 WMI_SERVICE_GPIO, len); 732 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 733 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 734 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 735 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 736 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 737 WMI_SERVICE_STA_KEEP_ALIVE, len); 738 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 739 WMI_SERVICE_TX_ENCAP, len); 740 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 741 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 742 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 743 WMI_SERVICE_EARLY_RX, len); 744 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 745 WMI_SERVICE_ENHANCED_PROXY_STA, len); 746 SVCMAP(WMI_10_4_SERVICE_TT, 747 WMI_SERVICE_TT, len); 748 SVCMAP(WMI_10_4_SERVICE_ATF, 749 WMI_SERVICE_ATF, len); 750 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 751 WMI_SERVICE_PEER_CACHING, len); 752 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 753 WMI_SERVICE_COEX_GPIO, len); 754 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 755 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 756 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 757 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 758 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 759 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 760 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 761 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 762 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 763 WMI_SERVICE_MESH_NON_11S, len); 764 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 765 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 766 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 767 WMI_SERVICE_PEER_STATS, len); 768 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 769 WMI_SERVICE_MESH_11S, len); 770 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 771 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 772 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 773 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 774 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 775 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 776 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 777 WMI_SERVICE_TX_MODE_DYNAMIC, len); 778 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 779 WMI_SERVICE_VDEV_RX_FILTER, len); 780 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 781 WMI_SERVICE_BTCOEX, len); 782 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 783 WMI_SERVICE_CHECK_CAL_VERSION, len); 784 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 785 WMI_SERVICE_DBGLOG_WARN2, len); 786 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 787 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 788 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 789 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 790 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 791 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 792 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 793 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 794 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 795 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 796 SVCMAP(WMI_10_4_SERVICE_TDLS, 797 WMI_SERVICE_TDLS, len); 798 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 799 WMI_SERVICE_TDLS_OFFCHAN, len); 800 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 801 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 802 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 803 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 804 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 805 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 806 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 807 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 808 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 809 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 810 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 811 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 812 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 813 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); 814 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, 815 WMI_SERVICE_TPC_STATS_FINAL, len); 816 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 817 WMI_SERVICE_TX_DATA_ACK_RSSI, len); 818 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 819 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); 820 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 821 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len); 822 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 823 WMI_SERVICE_RTT_RESPONDER_ROLE, len); 824 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 825 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 826 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME, 827 WMI_SERVICE_REPORT_AIRTIME, len); 828 SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER, 829 WMI_SERVICE_TX_PWR_PER_PEER, len); 830 } 831 832 #undef SVCMAP 833 834 /* 2 word representation of MAC addr */ 835 struct wmi_mac_addr { 836 union { 837 u8 addr[6]; 838 struct { 839 u32 word0; 840 u32 word1; 841 } __packed; 842 } __packed; 843 } __packed; 844 845 struct wmi_cmd_map { 846 u32 init_cmdid; 847 u32 start_scan_cmdid; 848 u32 stop_scan_cmdid; 849 u32 scan_chan_list_cmdid; 850 u32 scan_sch_prio_tbl_cmdid; 851 u32 scan_prob_req_oui_cmdid; 852 u32 pdev_set_regdomain_cmdid; 853 u32 pdev_set_channel_cmdid; 854 u32 pdev_set_param_cmdid; 855 u32 pdev_pktlog_enable_cmdid; 856 u32 pdev_pktlog_disable_cmdid; 857 u32 pdev_set_wmm_params_cmdid; 858 u32 pdev_set_ht_cap_ie_cmdid; 859 u32 pdev_set_vht_cap_ie_cmdid; 860 u32 pdev_set_dscp_tid_map_cmdid; 861 u32 pdev_set_quiet_mode_cmdid; 862 u32 pdev_green_ap_ps_enable_cmdid; 863 u32 pdev_get_tpc_config_cmdid; 864 u32 pdev_set_base_macaddr_cmdid; 865 u32 vdev_create_cmdid; 866 u32 vdev_delete_cmdid; 867 u32 vdev_start_request_cmdid; 868 u32 vdev_restart_request_cmdid; 869 u32 vdev_up_cmdid; 870 u32 vdev_stop_cmdid; 871 u32 vdev_down_cmdid; 872 u32 vdev_set_param_cmdid; 873 u32 vdev_install_key_cmdid; 874 u32 peer_create_cmdid; 875 u32 peer_delete_cmdid; 876 u32 peer_flush_tids_cmdid; 877 u32 peer_set_param_cmdid; 878 u32 peer_assoc_cmdid; 879 u32 peer_add_wds_entry_cmdid; 880 u32 peer_remove_wds_entry_cmdid; 881 u32 peer_mcast_group_cmdid; 882 u32 bcn_tx_cmdid; 883 u32 pdev_send_bcn_cmdid; 884 u32 bcn_tmpl_cmdid; 885 u32 bcn_filter_rx_cmdid; 886 u32 prb_req_filter_rx_cmdid; 887 u32 mgmt_tx_cmdid; 888 u32 mgmt_tx_send_cmdid; 889 u32 prb_tmpl_cmdid; 890 u32 addba_clear_resp_cmdid; 891 u32 addba_send_cmdid; 892 u32 addba_status_cmdid; 893 u32 delba_send_cmdid; 894 u32 addba_set_resp_cmdid; 895 u32 send_singleamsdu_cmdid; 896 u32 sta_powersave_mode_cmdid; 897 u32 sta_powersave_param_cmdid; 898 u32 sta_mimo_ps_mode_cmdid; 899 u32 pdev_dfs_enable_cmdid; 900 u32 pdev_dfs_disable_cmdid; 901 u32 roam_scan_mode; 902 u32 roam_scan_rssi_threshold; 903 u32 roam_scan_period; 904 u32 roam_scan_rssi_change_threshold; 905 u32 roam_ap_profile; 906 u32 ofl_scan_add_ap_profile; 907 u32 ofl_scan_remove_ap_profile; 908 u32 ofl_scan_period; 909 u32 p2p_dev_set_device_info; 910 u32 p2p_dev_set_discoverability; 911 u32 p2p_go_set_beacon_ie; 912 u32 p2p_go_set_probe_resp_ie; 913 u32 p2p_set_vendor_ie_data_cmdid; 914 u32 ap_ps_peer_param_cmdid; 915 u32 ap_ps_peer_uapsd_coex_cmdid; 916 u32 peer_rate_retry_sched_cmdid; 917 u32 wlan_profile_trigger_cmdid; 918 u32 wlan_profile_set_hist_intvl_cmdid; 919 u32 wlan_profile_get_profile_data_cmdid; 920 u32 wlan_profile_enable_profile_id_cmdid; 921 u32 wlan_profile_list_profile_id_cmdid; 922 u32 pdev_suspend_cmdid; 923 u32 pdev_resume_cmdid; 924 u32 add_bcn_filter_cmdid; 925 u32 rmv_bcn_filter_cmdid; 926 u32 wow_add_wake_pattern_cmdid; 927 u32 wow_del_wake_pattern_cmdid; 928 u32 wow_enable_disable_wake_event_cmdid; 929 u32 wow_enable_cmdid; 930 u32 wow_hostwakeup_from_sleep_cmdid; 931 u32 rtt_measreq_cmdid; 932 u32 rtt_tsf_cmdid; 933 u32 vdev_spectral_scan_configure_cmdid; 934 u32 vdev_spectral_scan_enable_cmdid; 935 u32 request_stats_cmdid; 936 u32 set_arp_ns_offload_cmdid; 937 u32 network_list_offload_config_cmdid; 938 u32 gtk_offload_cmdid; 939 u32 csa_offload_enable_cmdid; 940 u32 csa_offload_chanswitch_cmdid; 941 u32 chatter_set_mode_cmdid; 942 u32 peer_tid_addba_cmdid; 943 u32 peer_tid_delba_cmdid; 944 u32 sta_dtim_ps_method_cmdid; 945 u32 sta_uapsd_auto_trig_cmdid; 946 u32 sta_keepalive_cmd; 947 u32 echo_cmdid; 948 u32 pdev_utf_cmdid; 949 u32 dbglog_cfg_cmdid; 950 u32 pdev_qvit_cmdid; 951 u32 pdev_ftm_intg_cmdid; 952 u32 vdev_set_keepalive_cmdid; 953 u32 vdev_get_keepalive_cmdid; 954 u32 force_fw_hang_cmdid; 955 u32 gpio_config_cmdid; 956 u32 gpio_output_cmdid; 957 u32 pdev_get_temperature_cmdid; 958 u32 vdev_set_wmm_params_cmdid; 959 u32 tdls_set_state_cmdid; 960 u32 tdls_peer_update_cmdid; 961 u32 adaptive_qcs_cmdid; 962 u32 scan_update_request_cmdid; 963 u32 vdev_standby_response_cmdid; 964 u32 vdev_resume_response_cmdid; 965 u32 wlan_peer_caching_add_peer_cmdid; 966 u32 wlan_peer_caching_evict_peer_cmdid; 967 u32 wlan_peer_caching_restore_peer_cmdid; 968 u32 wlan_peer_caching_print_all_peers_info_cmdid; 969 u32 peer_update_wds_entry_cmdid; 970 u32 peer_add_proxy_sta_entry_cmdid; 971 u32 rtt_keepalive_cmdid; 972 u32 oem_req_cmdid; 973 u32 nan_cmdid; 974 u32 vdev_ratemask_cmdid; 975 u32 qboost_cfg_cmdid; 976 u32 pdev_smart_ant_enable_cmdid; 977 u32 pdev_smart_ant_set_rx_antenna_cmdid; 978 u32 peer_smart_ant_set_tx_antenna_cmdid; 979 u32 peer_smart_ant_set_train_info_cmdid; 980 u32 peer_smart_ant_set_node_config_ops_cmdid; 981 u32 pdev_set_antenna_switch_table_cmdid; 982 u32 pdev_set_ctl_table_cmdid; 983 u32 pdev_set_mimogain_table_cmdid; 984 u32 pdev_ratepwr_table_cmdid; 985 u32 pdev_ratepwr_chainmsk_table_cmdid; 986 u32 pdev_fips_cmdid; 987 u32 tt_set_conf_cmdid; 988 u32 fwtest_cmdid; 989 u32 vdev_atf_request_cmdid; 990 u32 peer_atf_request_cmdid; 991 u32 pdev_get_ani_cck_config_cmdid; 992 u32 pdev_get_ani_ofdm_config_cmdid; 993 u32 pdev_reserve_ast_entry_cmdid; 994 u32 pdev_get_nfcal_power_cmdid; 995 u32 pdev_get_tpc_cmdid; 996 u32 pdev_get_ast_info_cmdid; 997 u32 vdev_set_dscp_tid_map_cmdid; 998 u32 pdev_get_info_cmdid; 999 u32 vdev_get_info_cmdid; 1000 u32 vdev_filter_neighbor_rx_packets_cmdid; 1001 u32 mu_cal_start_cmdid; 1002 u32 set_cca_params_cmdid; 1003 u32 pdev_bss_chan_info_request_cmdid; 1004 u32 pdev_enable_adaptive_cca_cmdid; 1005 u32 ext_resource_cfg_cmdid; 1006 u32 vdev_set_ie_cmdid; 1007 u32 set_lteu_config_cmdid; 1008 u32 atf_ssid_grouping_request_cmdid; 1009 u32 peer_atf_ext_request_cmdid; 1010 u32 set_periodic_channel_stats_cfg_cmdid; 1011 u32 peer_bwf_request_cmdid; 1012 u32 btcoex_cfg_cmdid; 1013 u32 peer_tx_mu_txmit_count_cmdid; 1014 u32 peer_tx_mu_txmit_rstcnt_cmdid; 1015 u32 peer_gid_userpos_list_cmdid; 1016 u32 pdev_check_cal_version_cmdid; 1017 u32 coex_version_cfg_cmid; 1018 u32 pdev_get_rx_filter_cmdid; 1019 u32 pdev_extended_nss_cfg_cmdid; 1020 u32 vdev_set_scan_nac_rssi_cmdid; 1021 u32 prog_gpio_band_select_cmdid; 1022 u32 config_smart_logging_cmdid; 1023 u32 debug_fatal_condition_cmdid; 1024 u32 get_tsf_timer_cmdid; 1025 u32 pdev_get_tpc_table_cmdid; 1026 u32 vdev_sifs_trigger_time_cmdid; 1027 u32 pdev_wds_entry_list_cmdid; 1028 u32 tdls_set_offchan_mode_cmdid; 1029 u32 radar_found_cmdid; 1030 u32 set_bb_timing_cmdid; 1031 }; 1032 1033 /* 1034 * wmi command groups. 1035 */ 1036 enum wmi_cmd_group { 1037 /* 0 to 2 are reserved */ 1038 WMI_GRP_START = 0x3, 1039 WMI_GRP_SCAN = WMI_GRP_START, 1040 WMI_GRP_PDEV, 1041 WMI_GRP_VDEV, 1042 WMI_GRP_PEER, 1043 WMI_GRP_MGMT, 1044 WMI_GRP_BA_NEG, 1045 WMI_GRP_STA_PS, 1046 WMI_GRP_DFS, 1047 WMI_GRP_ROAM, 1048 WMI_GRP_OFL_SCAN, 1049 WMI_GRP_P2P, 1050 WMI_GRP_AP_PS, 1051 WMI_GRP_RATE_CTRL, 1052 WMI_GRP_PROFILE, 1053 WMI_GRP_SUSPEND, 1054 WMI_GRP_BCN_FILTER, 1055 WMI_GRP_WOW, 1056 WMI_GRP_RTT, 1057 WMI_GRP_SPECTRAL, 1058 WMI_GRP_STATS, 1059 WMI_GRP_ARP_NS_OFL, 1060 WMI_GRP_NLO_OFL, 1061 WMI_GRP_GTK_OFL, 1062 WMI_GRP_CSA_OFL, 1063 WMI_GRP_CHATTER, 1064 WMI_GRP_TID_ADDBA, 1065 WMI_GRP_MISC, 1066 WMI_GRP_GPIO, 1067 }; 1068 1069 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 1070 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 1071 1072 #define WMI_CMD_UNSUPPORTED 0 1073 1074 /* Command IDs and command events for MAIN FW. */ 1075 enum wmi_cmd_id { 1076 WMI_INIT_CMDID = 0x1, 1077 1078 /* Scan specific commands */ 1079 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 1080 WMI_STOP_SCAN_CMDID, 1081 WMI_SCAN_CHAN_LIST_CMDID, 1082 WMI_SCAN_SCH_PRIO_TBL_CMDID, 1083 1084 /* PDEV (physical device) specific commands */ 1085 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1086 WMI_PDEV_SET_CHANNEL_CMDID, 1087 WMI_PDEV_SET_PARAM_CMDID, 1088 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1089 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1090 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1091 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1092 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1093 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1094 WMI_PDEV_SET_QUIET_MODE_CMDID, 1095 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1096 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1097 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1098 1099 /* VDEV (virtual device) specific commands */ 1100 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1101 WMI_VDEV_DELETE_CMDID, 1102 WMI_VDEV_START_REQUEST_CMDID, 1103 WMI_VDEV_RESTART_REQUEST_CMDID, 1104 WMI_VDEV_UP_CMDID, 1105 WMI_VDEV_STOP_CMDID, 1106 WMI_VDEV_DOWN_CMDID, 1107 WMI_VDEV_SET_PARAM_CMDID, 1108 WMI_VDEV_INSTALL_KEY_CMDID, 1109 1110 /* peer specific commands */ 1111 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1112 WMI_PEER_DELETE_CMDID, 1113 WMI_PEER_FLUSH_TIDS_CMDID, 1114 WMI_PEER_SET_PARAM_CMDID, 1115 WMI_PEER_ASSOC_CMDID, 1116 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1117 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1118 WMI_PEER_MCAST_GROUP_CMDID, 1119 1120 /* beacon/management specific commands */ 1121 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1122 WMI_PDEV_SEND_BCN_CMDID, 1123 WMI_BCN_TMPL_CMDID, 1124 WMI_BCN_FILTER_RX_CMDID, 1125 WMI_PRB_REQ_FILTER_RX_CMDID, 1126 WMI_MGMT_TX_CMDID, 1127 WMI_PRB_TMPL_CMDID, 1128 1129 /* commands to directly control BA negotiation directly from host. */ 1130 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1131 WMI_ADDBA_SEND_CMDID, 1132 WMI_ADDBA_STATUS_CMDID, 1133 WMI_DELBA_SEND_CMDID, 1134 WMI_ADDBA_SET_RESP_CMDID, 1135 WMI_SEND_SINGLEAMSDU_CMDID, 1136 1137 /* Station power save specific config */ 1138 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1139 WMI_STA_POWERSAVE_PARAM_CMDID, 1140 WMI_STA_MIMO_PS_MODE_CMDID, 1141 1142 /** DFS-specific commands */ 1143 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1144 WMI_PDEV_DFS_DISABLE_CMDID, 1145 1146 /* Roaming specific commands */ 1147 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1148 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1149 WMI_ROAM_SCAN_PERIOD, 1150 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1151 WMI_ROAM_AP_PROFILE, 1152 1153 /* offload scan specific commands */ 1154 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1155 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1156 WMI_OFL_SCAN_PERIOD, 1157 1158 /* P2P specific commands */ 1159 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1160 WMI_P2P_DEV_SET_DISCOVERABILITY, 1161 WMI_P2P_GO_SET_BEACON_IE, 1162 WMI_P2P_GO_SET_PROBE_RESP_IE, 1163 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1164 1165 /* AP power save specific config */ 1166 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1167 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1168 1169 /* Rate-control specific commands */ 1170 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1171 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1172 1173 /* WLAN Profiling commands. */ 1174 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1175 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1176 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1177 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1178 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1179 1180 /* Suspend resume command Ids */ 1181 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1182 WMI_PDEV_RESUME_CMDID, 1183 1184 /* Beacon filter commands */ 1185 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1186 WMI_RMV_BCN_FILTER_CMDID, 1187 1188 /* WOW Specific WMI commands*/ 1189 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1190 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1191 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1192 WMI_WOW_ENABLE_CMDID, 1193 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1194 1195 /* RTT measurement related cmd */ 1196 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1197 WMI_RTT_TSF_CMDID, 1198 1199 /* spectral scan commands */ 1200 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1201 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1202 1203 /* F/W stats */ 1204 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1205 1206 /* ARP OFFLOAD REQUEST*/ 1207 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1208 1209 /* NS offload confid*/ 1210 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1211 1212 /* GTK offload Specific WMI commands*/ 1213 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1214 1215 /* CSA offload Specific WMI commands*/ 1216 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1217 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1218 1219 /* Chatter commands*/ 1220 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1221 1222 /* addba specific commands */ 1223 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1224 WMI_PEER_TID_DELBA_CMDID, 1225 1226 /* set station mimo powersave method */ 1227 WMI_STA_DTIM_PS_METHOD_CMDID, 1228 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1229 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1230 1231 /* STA Keep alive parameter configuration, 1232 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1233 */ 1234 WMI_STA_KEEPALIVE_CMD, 1235 1236 /* misc command group */ 1237 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1238 WMI_PDEV_UTF_CMDID, 1239 WMI_DBGLOG_CFG_CMDID, 1240 WMI_PDEV_QVIT_CMDID, 1241 WMI_PDEV_FTM_INTG_CMDID, 1242 WMI_VDEV_SET_KEEPALIVE_CMDID, 1243 WMI_VDEV_GET_KEEPALIVE_CMDID, 1244 WMI_FORCE_FW_HANG_CMDID, 1245 1246 /* GPIO Configuration */ 1247 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1248 WMI_GPIO_OUTPUT_CMDID, 1249 }; 1250 1251 enum wmi_event_id { 1252 WMI_SERVICE_READY_EVENTID = 0x1, 1253 WMI_READY_EVENTID, 1254 WMI_SERVICE_AVAILABLE_EVENTID, 1255 1256 /* Scan specific events */ 1257 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1258 1259 /* PDEV specific events */ 1260 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1261 WMI_CHAN_INFO_EVENTID, 1262 WMI_PHYERR_EVENTID, 1263 1264 /* VDEV specific events */ 1265 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1266 WMI_VDEV_STOPPED_EVENTID, 1267 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1268 1269 /* peer specific events */ 1270 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1271 1272 /* beacon/mgmt specific events */ 1273 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1274 WMI_HOST_SWBA_EVENTID, 1275 WMI_TBTTOFFSET_UPDATE_EVENTID, 1276 1277 /* ADDBA Related WMI Events*/ 1278 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1279 WMI_TX_ADDBA_COMPLETE_EVENTID, 1280 1281 /* Roam event to trigger roaming on host */ 1282 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1283 WMI_PROFILE_MATCH, 1284 1285 /* WoW */ 1286 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1287 1288 /* RTT */ 1289 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1290 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1291 WMI_RTT_ERROR_REPORT_EVENTID, 1292 1293 /* GTK offload */ 1294 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1295 WMI_GTK_REKEY_FAIL_EVENTID, 1296 1297 /* CSA IE received event */ 1298 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1299 1300 /* Misc events */ 1301 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1302 WMI_PDEV_UTF_EVENTID, 1303 WMI_DEBUG_MESG_EVENTID, 1304 WMI_UPDATE_STATS_EVENTID, 1305 WMI_DEBUG_PRINT_EVENTID, 1306 WMI_DCS_INTERFERENCE_EVENTID, 1307 WMI_PDEV_QVIT_EVENTID, 1308 WMI_WLAN_PROFILE_DATA_EVENTID, 1309 WMI_PDEV_FTM_INTG_EVENTID, 1310 WMI_WLAN_FREQ_AVOID_EVENTID, 1311 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1312 1313 /* GPIO Event */ 1314 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1315 }; 1316 1317 /* Command IDs and command events for 10.X firmware */ 1318 enum wmi_10x_cmd_id { 1319 WMI_10X_START_CMDID = 0x9000, 1320 WMI_10X_END_CMDID = 0x9FFF, 1321 1322 /* initialize the wlan sub system */ 1323 WMI_10X_INIT_CMDID, 1324 1325 /* Scan specific commands */ 1326 1327 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1328 WMI_10X_STOP_SCAN_CMDID, 1329 WMI_10X_SCAN_CHAN_LIST_CMDID, 1330 WMI_10X_ECHO_CMDID, 1331 1332 /* PDEV(physical device) specific commands */ 1333 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1334 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1335 WMI_10X_PDEV_SET_PARAM_CMDID, 1336 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1337 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1338 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1339 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1340 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1341 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1342 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1343 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1344 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1345 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1346 1347 /* VDEV(virtual device) specific commands */ 1348 WMI_10X_VDEV_CREATE_CMDID, 1349 WMI_10X_VDEV_DELETE_CMDID, 1350 WMI_10X_VDEV_START_REQUEST_CMDID, 1351 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1352 WMI_10X_VDEV_UP_CMDID, 1353 WMI_10X_VDEV_STOP_CMDID, 1354 WMI_10X_VDEV_DOWN_CMDID, 1355 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1356 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1357 WMI_10X_VDEV_SET_PARAM_CMDID, 1358 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1359 1360 /* peer specific commands */ 1361 WMI_10X_PEER_CREATE_CMDID, 1362 WMI_10X_PEER_DELETE_CMDID, 1363 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1364 WMI_10X_PEER_SET_PARAM_CMDID, 1365 WMI_10X_PEER_ASSOC_CMDID, 1366 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1367 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1368 WMI_10X_PEER_MCAST_GROUP_CMDID, 1369 1370 /* beacon/management specific commands */ 1371 1372 WMI_10X_BCN_TX_CMDID, 1373 WMI_10X_BCN_PRB_TMPL_CMDID, 1374 WMI_10X_BCN_FILTER_RX_CMDID, 1375 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1376 WMI_10X_MGMT_TX_CMDID, 1377 1378 /* commands to directly control ba negotiation directly from host. */ 1379 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1380 WMI_10X_ADDBA_SEND_CMDID, 1381 WMI_10X_ADDBA_STATUS_CMDID, 1382 WMI_10X_DELBA_SEND_CMDID, 1383 WMI_10X_ADDBA_SET_RESP_CMDID, 1384 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1385 1386 /* Station power save specific config */ 1387 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1388 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1389 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1390 1391 /* set debug log config */ 1392 WMI_10X_DBGLOG_CFG_CMDID, 1393 1394 /* DFS-specific commands */ 1395 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1396 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1397 1398 /* QVIT specific command id */ 1399 WMI_10X_PDEV_QVIT_CMDID, 1400 1401 /* Offload Scan and Roaming related commands */ 1402 WMI_10X_ROAM_SCAN_MODE, 1403 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1404 WMI_10X_ROAM_SCAN_PERIOD, 1405 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1406 WMI_10X_ROAM_AP_PROFILE, 1407 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1408 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1409 WMI_10X_OFL_SCAN_PERIOD, 1410 1411 /* P2P specific commands */ 1412 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1413 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1414 WMI_10X_P2P_GO_SET_BEACON_IE, 1415 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1416 1417 /* AP power save specific config */ 1418 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1419 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1420 1421 /* Rate-control specific commands */ 1422 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1423 1424 /* WLAN Profiling commands. */ 1425 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1426 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1427 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1428 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1429 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1430 1431 /* Suspend resume command Ids */ 1432 WMI_10X_PDEV_SUSPEND_CMDID, 1433 WMI_10X_PDEV_RESUME_CMDID, 1434 1435 /* Beacon filter commands */ 1436 WMI_10X_ADD_BCN_FILTER_CMDID, 1437 WMI_10X_RMV_BCN_FILTER_CMDID, 1438 1439 /* WOW Specific WMI commands*/ 1440 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1441 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1442 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1443 WMI_10X_WOW_ENABLE_CMDID, 1444 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1445 1446 /* RTT measurement related cmd */ 1447 WMI_10X_RTT_MEASREQ_CMDID, 1448 WMI_10X_RTT_TSF_CMDID, 1449 1450 /* transmit beacon by value */ 1451 WMI_10X_PDEV_SEND_BCN_CMDID, 1452 1453 /* F/W stats */ 1454 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1455 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1456 WMI_10X_REQUEST_STATS_CMDID, 1457 1458 /* GPIO Configuration */ 1459 WMI_10X_GPIO_CONFIG_CMDID, 1460 WMI_10X_GPIO_OUTPUT_CMDID, 1461 1462 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1463 }; 1464 1465 enum wmi_10x_event_id { 1466 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1467 WMI_10X_READY_EVENTID, 1468 WMI_10X_START_EVENTID = 0x9000, 1469 WMI_10X_END_EVENTID = 0x9FFF, 1470 1471 /* Scan specific events */ 1472 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1473 WMI_10X_ECHO_EVENTID, 1474 WMI_10X_DEBUG_MESG_EVENTID, 1475 WMI_10X_UPDATE_STATS_EVENTID, 1476 1477 /* Instantaneous RSSI event */ 1478 WMI_10X_INST_RSSI_STATS_EVENTID, 1479 1480 /* VDEV specific events */ 1481 WMI_10X_VDEV_START_RESP_EVENTID, 1482 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1483 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1484 WMI_10X_VDEV_STOPPED_EVENTID, 1485 1486 /* peer specific events */ 1487 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1488 1489 /* beacon/mgmt specific events */ 1490 WMI_10X_HOST_SWBA_EVENTID, 1491 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1492 WMI_10X_MGMT_RX_EVENTID, 1493 1494 /* Channel stats event */ 1495 WMI_10X_CHAN_INFO_EVENTID, 1496 1497 /* PHY Error specific WMI event */ 1498 WMI_10X_PHYERR_EVENTID, 1499 1500 /* Roam event to trigger roaming on host */ 1501 WMI_10X_ROAM_EVENTID, 1502 1503 /* matching AP found from list of profiles */ 1504 WMI_10X_PROFILE_MATCH, 1505 1506 /* debug print message used for tracing FW code while debugging */ 1507 WMI_10X_DEBUG_PRINT_EVENTID, 1508 /* VI spoecific event */ 1509 WMI_10X_PDEV_QVIT_EVENTID, 1510 /* FW code profile data in response to profile request */ 1511 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1512 1513 /*RTT related event ID*/ 1514 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1515 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1516 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1517 1518 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1519 WMI_10X_DCS_INTERFERENCE_EVENTID, 1520 1521 /* TPC config for the current operating channel */ 1522 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1523 1524 WMI_10X_GPIO_INPUT_EVENTID, 1525 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1526 }; 1527 1528 enum wmi_10_2_cmd_id { 1529 WMI_10_2_START_CMDID = 0x9000, 1530 WMI_10_2_END_CMDID = 0x9FFF, 1531 WMI_10_2_INIT_CMDID, 1532 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1533 WMI_10_2_STOP_SCAN_CMDID, 1534 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1535 WMI_10_2_ECHO_CMDID, 1536 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1537 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1538 WMI_10_2_PDEV_SET_PARAM_CMDID, 1539 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1540 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1541 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1542 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1543 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1544 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1545 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1546 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1547 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1548 WMI_10_2_VDEV_CREATE_CMDID, 1549 WMI_10_2_VDEV_DELETE_CMDID, 1550 WMI_10_2_VDEV_START_REQUEST_CMDID, 1551 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1552 WMI_10_2_VDEV_UP_CMDID, 1553 WMI_10_2_VDEV_STOP_CMDID, 1554 WMI_10_2_VDEV_DOWN_CMDID, 1555 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1556 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1557 WMI_10_2_VDEV_SET_PARAM_CMDID, 1558 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1559 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1560 WMI_10_2_PEER_CREATE_CMDID, 1561 WMI_10_2_PEER_DELETE_CMDID, 1562 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1563 WMI_10_2_PEER_SET_PARAM_CMDID, 1564 WMI_10_2_PEER_ASSOC_CMDID, 1565 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1566 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1567 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1568 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1569 WMI_10_2_BCN_TX_CMDID, 1570 WMI_10_2_BCN_PRB_TMPL_CMDID, 1571 WMI_10_2_BCN_FILTER_RX_CMDID, 1572 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1573 WMI_10_2_MGMT_TX_CMDID, 1574 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1575 WMI_10_2_ADDBA_SEND_CMDID, 1576 WMI_10_2_ADDBA_STATUS_CMDID, 1577 WMI_10_2_DELBA_SEND_CMDID, 1578 WMI_10_2_ADDBA_SET_RESP_CMDID, 1579 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1580 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1581 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1582 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1583 WMI_10_2_DBGLOG_CFG_CMDID, 1584 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1585 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1586 WMI_10_2_PDEV_QVIT_CMDID, 1587 WMI_10_2_ROAM_SCAN_MODE, 1588 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1589 WMI_10_2_ROAM_SCAN_PERIOD, 1590 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1591 WMI_10_2_ROAM_AP_PROFILE, 1592 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1593 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1594 WMI_10_2_OFL_SCAN_PERIOD, 1595 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1596 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1597 WMI_10_2_P2P_GO_SET_BEACON_IE, 1598 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1599 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1600 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1601 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1602 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1603 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1604 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1605 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1606 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1607 WMI_10_2_PDEV_SUSPEND_CMDID, 1608 WMI_10_2_PDEV_RESUME_CMDID, 1609 WMI_10_2_ADD_BCN_FILTER_CMDID, 1610 WMI_10_2_RMV_BCN_FILTER_CMDID, 1611 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1612 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1613 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1614 WMI_10_2_WOW_ENABLE_CMDID, 1615 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1616 WMI_10_2_RTT_MEASREQ_CMDID, 1617 WMI_10_2_RTT_TSF_CMDID, 1618 WMI_10_2_RTT_KEEPALIVE_CMDID, 1619 WMI_10_2_PDEV_SEND_BCN_CMDID, 1620 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1621 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1622 WMI_10_2_REQUEST_STATS_CMDID, 1623 WMI_10_2_GPIO_CONFIG_CMDID, 1624 WMI_10_2_GPIO_OUTPUT_CMDID, 1625 WMI_10_2_VDEV_RATEMASK_CMDID, 1626 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1627 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1628 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1629 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1630 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1631 WMI_10_2_FORCE_FW_HANG_CMDID, 1632 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1633 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1634 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1635 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1636 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1637 WMI_10_2_PDEV_GET_INFO, 1638 WMI_10_2_VDEV_GET_INFO, 1639 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1640 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1641 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1642 WMI_10_2_MU_CAL_START_CMDID, 1643 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1644 WMI_10_2_SET_CCA_PARAMS, 1645 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1646 WMI_10_2_FWTEST_CMDID, 1647 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID, 1648 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1649 }; 1650 1651 enum wmi_10_2_event_id { 1652 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1653 WMI_10_2_READY_EVENTID, 1654 WMI_10_2_DEBUG_MESG_EVENTID, 1655 WMI_10_2_START_EVENTID = 0x9000, 1656 WMI_10_2_END_EVENTID = 0x9FFF, 1657 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1658 WMI_10_2_ECHO_EVENTID, 1659 WMI_10_2_UPDATE_STATS_EVENTID, 1660 WMI_10_2_INST_RSSI_STATS_EVENTID, 1661 WMI_10_2_VDEV_START_RESP_EVENTID, 1662 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1663 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1664 WMI_10_2_VDEV_STOPPED_EVENTID, 1665 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1666 WMI_10_2_HOST_SWBA_EVENTID, 1667 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1668 WMI_10_2_MGMT_RX_EVENTID, 1669 WMI_10_2_CHAN_INFO_EVENTID, 1670 WMI_10_2_PHYERR_EVENTID, 1671 WMI_10_2_ROAM_EVENTID, 1672 WMI_10_2_PROFILE_MATCH, 1673 WMI_10_2_DEBUG_PRINT_EVENTID, 1674 WMI_10_2_PDEV_QVIT_EVENTID, 1675 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1676 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1677 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1678 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1679 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1680 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1681 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1682 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1683 WMI_10_2_GPIO_INPUT_EVENTID, 1684 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1685 WMI_10_2_GENERIC_BUFFER_EVENTID, 1686 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1687 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1688 WMI_10_2_WDS_PEER_EVENTID, 1689 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1690 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1691 WMI_10_2_MU_REPORT_EVENTID, 1692 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1693 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1694 }; 1695 1696 enum wmi_10_4_cmd_id { 1697 WMI_10_4_START_CMDID = 0x9000, 1698 WMI_10_4_END_CMDID = 0x9FFF, 1699 WMI_10_4_INIT_CMDID, 1700 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1701 WMI_10_4_STOP_SCAN_CMDID, 1702 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1703 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1704 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1705 WMI_10_4_ECHO_CMDID, 1706 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1707 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1708 WMI_10_4_PDEV_SET_PARAM_CMDID, 1709 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1710 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1711 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1712 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1713 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1714 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1715 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1716 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1717 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1718 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1719 WMI_10_4_VDEV_CREATE_CMDID, 1720 WMI_10_4_VDEV_DELETE_CMDID, 1721 WMI_10_4_VDEV_START_REQUEST_CMDID, 1722 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1723 WMI_10_4_VDEV_UP_CMDID, 1724 WMI_10_4_VDEV_STOP_CMDID, 1725 WMI_10_4_VDEV_DOWN_CMDID, 1726 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1727 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1728 WMI_10_4_VDEV_SET_PARAM_CMDID, 1729 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1730 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1731 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1732 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1733 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1734 WMI_10_4_PEER_CREATE_CMDID, 1735 WMI_10_4_PEER_DELETE_CMDID, 1736 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1737 WMI_10_4_PEER_SET_PARAM_CMDID, 1738 WMI_10_4_PEER_ASSOC_CMDID, 1739 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1740 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1741 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1742 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1743 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1744 WMI_10_4_BCN_TX_CMDID, 1745 WMI_10_4_PDEV_SEND_BCN_CMDID, 1746 WMI_10_4_BCN_PRB_TMPL_CMDID, 1747 WMI_10_4_BCN_FILTER_RX_CMDID, 1748 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1749 WMI_10_4_MGMT_TX_CMDID, 1750 WMI_10_4_PRB_TMPL_CMDID, 1751 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1752 WMI_10_4_ADDBA_SEND_CMDID, 1753 WMI_10_4_ADDBA_STATUS_CMDID, 1754 WMI_10_4_DELBA_SEND_CMDID, 1755 WMI_10_4_ADDBA_SET_RESP_CMDID, 1756 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1757 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1758 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1759 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1760 WMI_10_4_DBGLOG_CFG_CMDID, 1761 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1762 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1763 WMI_10_4_PDEV_QVIT_CMDID, 1764 WMI_10_4_ROAM_SCAN_MODE, 1765 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1766 WMI_10_4_ROAM_SCAN_PERIOD, 1767 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1768 WMI_10_4_ROAM_AP_PROFILE, 1769 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1770 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1771 WMI_10_4_OFL_SCAN_PERIOD, 1772 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1773 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1774 WMI_10_4_P2P_GO_SET_BEACON_IE, 1775 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1776 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1777 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1778 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1779 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1780 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1781 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1782 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1783 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1784 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1785 WMI_10_4_PDEV_SUSPEND_CMDID, 1786 WMI_10_4_PDEV_RESUME_CMDID, 1787 WMI_10_4_ADD_BCN_FILTER_CMDID, 1788 WMI_10_4_RMV_BCN_FILTER_CMDID, 1789 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1790 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1791 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1792 WMI_10_4_WOW_ENABLE_CMDID, 1793 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1794 WMI_10_4_RTT_MEASREQ_CMDID, 1795 WMI_10_4_RTT_TSF_CMDID, 1796 WMI_10_4_RTT_KEEPALIVE_CMDID, 1797 WMI_10_4_OEM_REQ_CMDID, 1798 WMI_10_4_NAN_CMDID, 1799 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1800 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1801 WMI_10_4_REQUEST_STATS_CMDID, 1802 WMI_10_4_GPIO_CONFIG_CMDID, 1803 WMI_10_4_GPIO_OUTPUT_CMDID, 1804 WMI_10_4_VDEV_RATEMASK_CMDID, 1805 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1806 WMI_10_4_GTK_OFFLOAD_CMDID, 1807 WMI_10_4_QBOOST_CFG_CMDID, 1808 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1809 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1810 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1811 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1812 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1813 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1814 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1815 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1816 WMI_10_4_FORCE_FW_HANG_CMDID, 1817 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1818 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1819 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1820 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1821 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1822 WMI_10_4_PDEV_FIPS_CMDID, 1823 WMI_10_4_TT_SET_CONF_CMDID, 1824 WMI_10_4_FWTEST_CMDID, 1825 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1826 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1827 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1828 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1829 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1830 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1831 WMI_10_4_PDEV_GET_TPC_CMDID, 1832 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1833 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1834 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1835 WMI_10_4_PDEV_GET_INFO_CMDID, 1836 WMI_10_4_VDEV_GET_INFO_CMDID, 1837 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1838 WMI_10_4_MU_CAL_START_CMDID, 1839 WMI_10_4_SET_CCA_PARAMS_CMDID, 1840 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1841 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1842 WMI_10_4_VDEV_SET_IE_CMDID, 1843 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1844 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1845 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1846 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1847 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1848 WMI_10_4_BTCOEX_CFG_CMDID, 1849 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1850 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1851 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1852 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1853 WMI_10_4_COEX_VERSION_CFG_CMID, 1854 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1855 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1856 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1857 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1858 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1859 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1860 WMI_10_4_GET_TSF_TIMER_CMDID, 1861 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1862 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1863 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1864 WMI_10_4_TDLS_SET_STATE_CMDID, 1865 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1866 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1867 WMI_10_4_PDEV_SEND_FD_CMDID, 1868 WMI_10_4_ENABLE_FILS_CMDID, 1869 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, 1870 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, 1871 WMI_10_4_RADAR_FOUND_CMDID, 1872 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1873 }; 1874 1875 enum wmi_10_4_event_id { 1876 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1877 WMI_10_4_READY_EVENTID, 1878 WMI_10_4_DEBUG_MESG_EVENTID, 1879 WMI_10_4_START_EVENTID = 0x9000, 1880 WMI_10_4_END_EVENTID = 0x9FFF, 1881 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1882 WMI_10_4_ECHO_EVENTID, 1883 WMI_10_4_UPDATE_STATS_EVENTID, 1884 WMI_10_4_INST_RSSI_STATS_EVENTID, 1885 WMI_10_4_VDEV_START_RESP_EVENTID, 1886 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1887 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1888 WMI_10_4_VDEV_STOPPED_EVENTID, 1889 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1890 WMI_10_4_HOST_SWBA_EVENTID, 1891 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1892 WMI_10_4_MGMT_RX_EVENTID, 1893 WMI_10_4_CHAN_INFO_EVENTID, 1894 WMI_10_4_PHYERR_EVENTID, 1895 WMI_10_4_ROAM_EVENTID, 1896 WMI_10_4_PROFILE_MATCH, 1897 WMI_10_4_DEBUG_PRINT_EVENTID, 1898 WMI_10_4_PDEV_QVIT_EVENTID, 1899 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1900 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1901 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1902 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1903 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1904 WMI_10_4_OEM_CAPABILITY_EVENTID, 1905 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1906 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1907 WMI_10_4_NAN_EVENTID, 1908 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1909 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1910 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1911 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1912 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1913 WMI_10_4_CSA_HANDLING_EVENTID, 1914 WMI_10_4_GPIO_INPUT_EVENTID, 1915 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1916 WMI_10_4_GENERIC_BUFFER_EVENTID, 1917 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1918 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1919 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1920 WMI_10_4_WDS_PEER_EVENTID, 1921 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1922 WMI_10_4_PDEV_FIPS_EVENTID, 1923 WMI_10_4_TT_STATS_EVENTID, 1924 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1925 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1926 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1927 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1928 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1929 WMI_10_4_PDEV_TPC_EVENTID, 1930 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1931 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1932 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1933 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1934 WMI_10_4_MU_REPORT_EVENTID, 1935 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1936 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1937 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1938 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1939 WMI_10_4_ATF_PEER_STATS_EVENTID, 1940 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1941 WMI_10_4_NAC_RSSI_EVENTID, 1942 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1943 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1944 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1945 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1946 WMI_10_4_TDLS_PEER_EVENTID, 1947 WMI_10_4_HOST_SWFDA_EVENTID, 1948 WMI_10_4_ESP_ESTIMATE_EVENTID, 1949 WMI_10_4_DFS_STATUS_CHECK_EVENTID, 1950 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1951 }; 1952 1953 enum wmi_phy_mode { 1954 MODE_11A = 0, /* 11a Mode */ 1955 MODE_11G = 1, /* 11b/g Mode */ 1956 MODE_11B = 2, /* 11b Mode */ 1957 MODE_11GONLY = 3, /* 11g only Mode */ 1958 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1959 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1960 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1961 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1962 MODE_11AC_VHT20 = 8, 1963 MODE_11AC_VHT40 = 9, 1964 MODE_11AC_VHT80 = 10, 1965 /* MODE_11AC_VHT160 = 11, */ 1966 MODE_11AC_VHT20_2G = 11, 1967 MODE_11AC_VHT40_2G = 12, 1968 MODE_11AC_VHT80_2G = 13, 1969 MODE_11AC_VHT80_80 = 14, 1970 MODE_11AC_VHT160 = 15, 1971 MODE_UNKNOWN = 16, 1972 MODE_MAX = 16 1973 }; 1974 1975 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1976 { 1977 switch (mode) { 1978 case MODE_11A: 1979 return "11a"; 1980 case MODE_11G: 1981 return "11g"; 1982 case MODE_11B: 1983 return "11b"; 1984 case MODE_11GONLY: 1985 return "11gonly"; 1986 case MODE_11NA_HT20: 1987 return "11na-ht20"; 1988 case MODE_11NG_HT20: 1989 return "11ng-ht20"; 1990 case MODE_11NA_HT40: 1991 return "11na-ht40"; 1992 case MODE_11NG_HT40: 1993 return "11ng-ht40"; 1994 case MODE_11AC_VHT20: 1995 return "11ac-vht20"; 1996 case MODE_11AC_VHT40: 1997 return "11ac-vht40"; 1998 case MODE_11AC_VHT80: 1999 return "11ac-vht80"; 2000 case MODE_11AC_VHT160: 2001 return "11ac-vht160"; 2002 case MODE_11AC_VHT80_80: 2003 return "11ac-vht80+80"; 2004 case MODE_11AC_VHT20_2G: 2005 return "11ac-vht20-2g"; 2006 case MODE_11AC_VHT40_2G: 2007 return "11ac-vht40-2g"; 2008 case MODE_11AC_VHT80_2G: 2009 return "11ac-vht80-2g"; 2010 case MODE_UNKNOWN: 2011 /* skip */ 2012 break; 2013 2014 /* no default handler to allow compiler to check that the 2015 * enum is fully handled 2016 */ 2017 } 2018 2019 return "<unknown>"; 2020 } 2021 2022 #define WMI_CHAN_LIST_TAG 0x1 2023 #define WMI_SSID_LIST_TAG 0x2 2024 #define WMI_BSSID_LIST_TAG 0x3 2025 #define WMI_IE_TAG 0x4 2026 2027 struct wmi_channel { 2028 __le32 mhz; 2029 __le32 band_center_freq1; 2030 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 2031 union { 2032 __le32 flags; /* WMI_CHAN_FLAG_ */ 2033 struct { 2034 u8 mode; /* only 6 LSBs */ 2035 } __packed; 2036 } __packed; 2037 union { 2038 __le32 reginfo0; 2039 struct { 2040 /* note: power unit is 0.5 dBm */ 2041 u8 min_power; 2042 u8 max_power; 2043 u8 reg_power; 2044 u8 reg_classid; 2045 } __packed; 2046 } __packed; 2047 union { 2048 __le32 reginfo1; 2049 struct { 2050 u8 antenna_max; 2051 u8 max_tx_power; 2052 } __packed; 2053 } __packed; 2054 } __packed; 2055 2056 struct wmi_channel_arg { 2057 u32 freq; 2058 u32 band_center_freq1; 2059 u32 band_center_freq2; 2060 bool passive; 2061 bool allow_ibss; 2062 bool allow_ht; 2063 bool allow_vht; 2064 bool ht40plus; 2065 bool chan_radar; 2066 /* note: power unit is 0.5 dBm */ 2067 u32 min_power; 2068 u32 max_power; 2069 u32 max_reg_power; 2070 u32 max_antenna_gain; 2071 u32 reg_class_id; 2072 enum wmi_phy_mode mode; 2073 }; 2074 2075 enum wmi_channel_change_cause { 2076 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 2077 WMI_CHANNEL_CHANGE_CAUSE_CSA, 2078 }; 2079 2080 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 2081 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 2082 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 2083 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 2084 #define WMI_CHAN_FLAG_DFS (1 << 10) 2085 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 2086 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 2087 2088 /* Indicate reason for channel switch */ 2089 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 2090 2091 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 2092 2093 /* HT Capabilities*/ 2094 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2095 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2096 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2097 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2098 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2099 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2100 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2101 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2102 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2103 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2104 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2105 #define WMI_HT_CAP_HT40_SGI 0x0800 2106 #define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */ 2107 #define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */ 2108 2109 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2110 WMI_HT_CAP_HT20_SGI | \ 2111 WMI_HT_CAP_HT40_SGI | \ 2112 WMI_HT_CAP_TX_STBC | \ 2113 WMI_HT_CAP_RX_STBC | \ 2114 WMI_HT_CAP_LDPC) 2115 2116 /* 2117 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2118 * field. The fields not defined here are not supported, or reserved. 2119 * Do not change these masks and if you have to add new one follow the 2120 * bitmask as specified by 802.11ac draft. 2121 */ 2122 2123 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2124 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2125 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2126 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2127 #define WMI_VHT_CAP_TX_STBC 0x00000080 2128 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2129 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2130 #define WMI_VHT_CAP_SU_BFER 0x00000800 2131 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2132 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2133 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2134 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2135 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2136 #define WMI_VHT_CAP_MU_BFER 0x00080000 2137 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2138 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2139 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2140 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2141 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2142 2143 /* The following also refer for max HT AMSDU */ 2144 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2145 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2146 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2147 2148 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2149 WMI_VHT_CAP_RX_LDPC | \ 2150 WMI_VHT_CAP_SGI_80MHZ | \ 2151 WMI_VHT_CAP_TX_STBC | \ 2152 WMI_VHT_CAP_RX_STBC_MASK | \ 2153 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2154 WMI_VHT_CAP_RX_FIXED_ANT | \ 2155 WMI_VHT_CAP_TX_FIXED_ANT) 2156 2157 /* 2158 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2159 * 802.11ac 2160 */ 2161 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2162 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2163 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2164 2165 enum { 2166 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2167 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2168 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2169 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2170 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2171 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2172 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2173 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2174 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2175 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2176 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2177 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2178 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2179 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2180 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2181 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2182 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2183 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2184 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2185 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2186 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2187 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2188 REGDMN_MODE_ALL = 0xffffffff 2189 }; 2190 2191 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2192 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2193 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2194 2195 /* regulatory capabilities */ 2196 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2197 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2198 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2199 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2200 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2201 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2202 2203 struct hal_reg_capabilities { 2204 /* regdomain value specified in EEPROM */ 2205 __le32 eeprom_rd; 2206 /*regdomain */ 2207 __le32 eeprom_rd_ext; 2208 /* CAP1 capabilities bit map. */ 2209 __le32 regcap1; 2210 /* REGDMN EEPROM CAP. */ 2211 __le32 regcap2; 2212 /* REGDMN MODE */ 2213 __le32 wireless_modes; 2214 __le32 low_2ghz_chan; 2215 __le32 high_2ghz_chan; 2216 __le32 low_5ghz_chan; 2217 __le32 high_5ghz_chan; 2218 } __packed; 2219 2220 enum wlan_mode_capability { 2221 WHAL_WLAN_11A_CAPABILITY = 0x1, 2222 WHAL_WLAN_11G_CAPABILITY = 0x2, 2223 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2224 }; 2225 2226 /* structure used by FW for requesting host memory */ 2227 struct wlan_host_mem_req { 2228 /* ID of the request */ 2229 __le32 req_id; 2230 /* size of the of each unit */ 2231 __le32 unit_size; 2232 /* flags to indicate that 2233 * the number units is dependent 2234 * on number of resources(num vdevs num peers .. etc) 2235 */ 2236 __le32 num_unit_info; 2237 /* 2238 * actual number of units to allocate . if flags in the num_unit_info 2239 * indicate that number of units is tied to number of a particular 2240 * resource to allocate then num_units filed is set to 0 and host 2241 * will derive the number units from number of the resources it is 2242 * requesting. 2243 */ 2244 __le32 num_units; 2245 } __packed; 2246 2247 /* 2248 * The following struct holds optional payload for 2249 * wmi_service_ready_event,e.g., 11ac pass some of the 2250 * device capability to the host. 2251 */ 2252 struct wmi_service_ready_event { 2253 __le32 sw_version; 2254 __le32 sw_version_1; 2255 __le32 abi_version; 2256 /* WMI_PHY_CAPABILITY */ 2257 __le32 phy_capability; 2258 /* Maximum number of frag table entries that SW will populate less 1 */ 2259 __le32 max_frag_entry; 2260 __le32 wmi_service_bitmap[16]; 2261 __le32 num_rf_chains; 2262 /* 2263 * The following field is only valid for service type 2264 * WMI_SERVICE_11AC 2265 */ 2266 __le32 ht_cap_info; /* WMI HT Capability */ 2267 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2268 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2269 __le32 hw_min_tx_power; 2270 __le32 hw_max_tx_power; 2271 struct hal_reg_capabilities hal_reg_capabilities; 2272 __le32 sys_cap_info; 2273 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2274 /* 2275 * Max beacon and Probe Response IE offload size 2276 * (includes optional P2P IEs) 2277 */ 2278 __le32 max_bcn_ie_size; 2279 /* 2280 * request to host to allocate a chuck of memory and pss it down to FW 2281 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2282 * data structures. Only valid for low latency interfaces like PCIE 2283 * where FW can access this memory directly (or) by DMA. 2284 */ 2285 __le32 num_mem_reqs; 2286 struct wlan_host_mem_req mem_reqs[0]; 2287 } __packed; 2288 2289 /* This is the definition from 10.X firmware branch */ 2290 struct wmi_10x_service_ready_event { 2291 __le32 sw_version; 2292 __le32 abi_version; 2293 2294 /* WMI_PHY_CAPABILITY */ 2295 __le32 phy_capability; 2296 2297 /* Maximum number of frag table entries that SW will populate less 1 */ 2298 __le32 max_frag_entry; 2299 __le32 wmi_service_bitmap[16]; 2300 __le32 num_rf_chains; 2301 2302 /* 2303 * The following field is only valid for service type 2304 * WMI_SERVICE_11AC 2305 */ 2306 __le32 ht_cap_info; /* WMI HT Capability */ 2307 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2308 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2309 __le32 hw_min_tx_power; 2310 __le32 hw_max_tx_power; 2311 2312 struct hal_reg_capabilities hal_reg_capabilities; 2313 2314 __le32 sys_cap_info; 2315 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2316 2317 /* 2318 * request to host to allocate a chuck of memory and pss it down to FW 2319 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2320 * data structures. Only valid for low latency interfaces like PCIE 2321 * where FW can access this memory directly (or) by DMA. 2322 */ 2323 __le32 num_mem_reqs; 2324 2325 struct wlan_host_mem_req mem_reqs[0]; 2326 } __packed; 2327 2328 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2329 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2330 2331 struct wmi_ready_event { 2332 __le32 sw_version; 2333 __le32 abi_version; 2334 struct wmi_mac_addr mac_addr; 2335 __le32 status; 2336 } __packed; 2337 2338 struct wmi_resource_config { 2339 /* number of virtual devices (VAPs) to support */ 2340 __le32 num_vdevs; 2341 2342 /* number of peer nodes to support */ 2343 __le32 num_peers; 2344 2345 /* 2346 * In offload mode target supports features like WOW, chatter and 2347 * other protocol offloads. In order to support them some 2348 * functionalities like reorder buffering, PN checking need to be 2349 * done in target. This determines maximum number of peers supported 2350 * by target in offload mode 2351 */ 2352 __le32 num_offload_peers; 2353 2354 /* For target-based RX reordering */ 2355 __le32 num_offload_reorder_bufs; 2356 2357 /* number of keys per peer */ 2358 __le32 num_peer_keys; 2359 2360 /* total number of TX/RX data TIDs */ 2361 __le32 num_tids; 2362 2363 /* 2364 * max skid for resolving hash collisions 2365 * 2366 * The address search table is sparse, so that if two MAC addresses 2367 * result in the same hash value, the second of these conflicting 2368 * entries can slide to the next index in the address search table, 2369 * and use it, if it is unoccupied. This ast_skid_limit parameter 2370 * specifies the upper bound on how many subsequent indices to search 2371 * over to find an unoccupied space. 2372 */ 2373 __le32 ast_skid_limit; 2374 2375 /* 2376 * the nominal chain mask for transmit 2377 * 2378 * The chain mask may be modified dynamically, e.g. to operate AP 2379 * tx with a reduced number of chains if no clients are associated. 2380 * This configuration parameter specifies the nominal chain-mask that 2381 * should be used when not operating with a reduced set of tx chains. 2382 */ 2383 __le32 tx_chain_mask; 2384 2385 /* 2386 * the nominal chain mask for receive 2387 * 2388 * The chain mask may be modified dynamically, e.g. for a client 2389 * to use a reduced number of chains for receive if the traffic to 2390 * the client is low enough that it doesn't require downlink MIMO 2391 * or antenna diversity. 2392 * This configuration parameter specifies the nominal chain-mask that 2393 * should be used when not operating with a reduced set of rx chains. 2394 */ 2395 __le32 rx_chain_mask; 2396 2397 /* 2398 * what rx reorder timeout (ms) to use for the AC 2399 * 2400 * Each WMM access class (voice, video, best-effort, background) will 2401 * have its own timeout value to dictate how long to wait for missing 2402 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2403 * already been received. 2404 * This parameter specifies the timeout in milliseconds for each 2405 * class. 2406 */ 2407 __le32 rx_timeout_pri_vi; 2408 __le32 rx_timeout_pri_vo; 2409 __le32 rx_timeout_pri_be; 2410 __le32 rx_timeout_pri_bk; 2411 2412 /* 2413 * what mode the rx should decap packets to 2414 * 2415 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2416 * THis setting also determines the default TX behavior, however TX 2417 * behavior can be modified on a per VAP basis during VAP init 2418 */ 2419 __le32 rx_decap_mode; 2420 2421 /* what is the maximum number of scan requests that can be queued */ 2422 __le32 scan_max_pending_reqs; 2423 2424 /* maximum VDEV that could use BMISS offload */ 2425 __le32 bmiss_offload_max_vdev; 2426 2427 /* maximum VDEV that could use offload roaming */ 2428 __le32 roam_offload_max_vdev; 2429 2430 /* maximum AP profiles that would push to offload roaming */ 2431 __le32 roam_offload_max_ap_profiles; 2432 2433 /* 2434 * how many groups to use for mcast->ucast conversion 2435 * 2436 * The target's WAL maintains a table to hold information regarding 2437 * which peers belong to a given multicast group, so that if 2438 * multicast->unicast conversion is enabled, the target can convert 2439 * multicast tx frames to a series of unicast tx frames, to each 2440 * peer within the multicast group. 2441 This num_mcast_groups configuration parameter tells the target how 2442 * many multicast groups to provide storage for within its multicast 2443 * group membership table. 2444 */ 2445 __le32 num_mcast_groups; 2446 2447 /* 2448 * size to alloc for the mcast membership table 2449 * 2450 * This num_mcast_table_elems configuration parameter tells the 2451 * target how many peer elements it needs to provide storage for in 2452 * its multicast group membership table. 2453 * These multicast group membership table elements are shared by the 2454 * multicast groups stored within the table. 2455 */ 2456 __le32 num_mcast_table_elems; 2457 2458 /* 2459 * whether/how to do multicast->unicast conversion 2460 * 2461 * This configuration parameter specifies whether the target should 2462 * perform multicast --> unicast conversion on transmit, and if so, 2463 * what to do if it finds no entries in its multicast group 2464 * membership table for the multicast IP address in the tx frame. 2465 * Configuration value: 2466 * 0 -> Do not perform multicast to unicast conversion. 2467 * 1 -> Convert multicast frames to unicast, if the IP multicast 2468 * address from the tx frame is found in the multicast group 2469 * membership table. If the IP multicast address is not found, 2470 * drop the frame. 2471 * 2 -> Convert multicast frames to unicast, if the IP multicast 2472 * address from the tx frame is found in the multicast group 2473 * membership table. If the IP multicast address is not found, 2474 * transmit the frame as multicast. 2475 */ 2476 __le32 mcast2ucast_mode; 2477 2478 /* 2479 * how much memory to allocate for a tx PPDU dbg log 2480 * 2481 * This parameter controls how much memory the target will allocate 2482 * to store a log of tx PPDU meta-information (how large the PPDU 2483 * was, when it was sent, whether it was successful, etc.) 2484 */ 2485 __le32 tx_dbg_log_size; 2486 2487 /* how many AST entries to be allocated for WDS */ 2488 __le32 num_wds_entries; 2489 2490 /* 2491 * MAC DMA burst size, e.g., For target PCI limit can be 2492 * 0 -default, 1 256B 2493 */ 2494 __le32 dma_burst_size; 2495 2496 /* 2497 * Fixed delimiters to be inserted after every MPDU to 2498 * account for interface latency to avoid underrun. 2499 */ 2500 __le32 mac_aggr_delim; 2501 2502 /* 2503 * determine whether target is responsible for detecting duplicate 2504 * non-aggregate MPDU and timing out stale fragments. 2505 * 2506 * A-MPDU reordering is always performed on the target. 2507 * 2508 * 0: target responsible for frag timeout and dup checking 2509 * 1: host responsible for frag timeout and dup checking 2510 */ 2511 __le32 rx_skip_defrag_timeout_dup_detection_check; 2512 2513 /* 2514 * Configuration for VoW : 2515 * No of Video Nodes to be supported 2516 * and Max no of descriptors for each Video link (node). 2517 */ 2518 __le32 vow_config; 2519 2520 /* maximum VDEV that could use GTK offload */ 2521 __le32 gtk_offload_max_vdev; 2522 2523 /* Number of msdu descriptors target should use */ 2524 __le32 num_msdu_desc; 2525 2526 /* 2527 * Max. number of Tx fragments per MSDU 2528 * This parameter controls the max number of Tx fragments per MSDU. 2529 * This is sent by the target as part of the WMI_SERVICE_READY event 2530 * and is overridden by the OS shim as required. 2531 */ 2532 __le32 max_frag_entries; 2533 } __packed; 2534 2535 struct wmi_resource_config_10x { 2536 /* number of virtual devices (VAPs) to support */ 2537 __le32 num_vdevs; 2538 2539 /* number of peer nodes to support */ 2540 __le32 num_peers; 2541 2542 /* number of keys per peer */ 2543 __le32 num_peer_keys; 2544 2545 /* total number of TX/RX data TIDs */ 2546 __le32 num_tids; 2547 2548 /* 2549 * max skid for resolving hash collisions 2550 * 2551 * The address search table is sparse, so that if two MAC addresses 2552 * result in the same hash value, the second of these conflicting 2553 * entries can slide to the next index in the address search table, 2554 * and use it, if it is unoccupied. This ast_skid_limit parameter 2555 * specifies the upper bound on how many subsequent indices to search 2556 * over to find an unoccupied space. 2557 */ 2558 __le32 ast_skid_limit; 2559 2560 /* 2561 * the nominal chain mask for transmit 2562 * 2563 * The chain mask may be modified dynamically, e.g. to operate AP 2564 * tx with a reduced number of chains if no clients are associated. 2565 * This configuration parameter specifies the nominal chain-mask that 2566 * should be used when not operating with a reduced set of tx chains. 2567 */ 2568 __le32 tx_chain_mask; 2569 2570 /* 2571 * the nominal chain mask for receive 2572 * 2573 * The chain mask may be modified dynamically, e.g. for a client 2574 * to use a reduced number of chains for receive if the traffic to 2575 * the client is low enough that it doesn't require downlink MIMO 2576 * or antenna diversity. 2577 * This configuration parameter specifies the nominal chain-mask that 2578 * should be used when not operating with a reduced set of rx chains. 2579 */ 2580 __le32 rx_chain_mask; 2581 2582 /* 2583 * what rx reorder timeout (ms) to use for the AC 2584 * 2585 * Each WMM access class (voice, video, best-effort, background) will 2586 * have its own timeout value to dictate how long to wait for missing 2587 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2588 * already been received. 2589 * This parameter specifies the timeout in milliseconds for each 2590 * class. 2591 */ 2592 __le32 rx_timeout_pri_vi; 2593 __le32 rx_timeout_pri_vo; 2594 __le32 rx_timeout_pri_be; 2595 __le32 rx_timeout_pri_bk; 2596 2597 /* 2598 * what mode the rx should decap packets to 2599 * 2600 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2601 * THis setting also determines the default TX behavior, however TX 2602 * behavior can be modified on a per VAP basis during VAP init 2603 */ 2604 __le32 rx_decap_mode; 2605 2606 /* what is the maximum number of scan requests that can be queued */ 2607 __le32 scan_max_pending_reqs; 2608 2609 /* maximum VDEV that could use BMISS offload */ 2610 __le32 bmiss_offload_max_vdev; 2611 2612 /* maximum VDEV that could use offload roaming */ 2613 __le32 roam_offload_max_vdev; 2614 2615 /* maximum AP profiles that would push to offload roaming */ 2616 __le32 roam_offload_max_ap_profiles; 2617 2618 /* 2619 * how many groups to use for mcast->ucast conversion 2620 * 2621 * The target's WAL maintains a table to hold information regarding 2622 * which peers belong to a given multicast group, so that if 2623 * multicast->unicast conversion is enabled, the target can convert 2624 * multicast tx frames to a series of unicast tx frames, to each 2625 * peer within the multicast group. 2626 This num_mcast_groups configuration parameter tells the target how 2627 * many multicast groups to provide storage for within its multicast 2628 * group membership table. 2629 */ 2630 __le32 num_mcast_groups; 2631 2632 /* 2633 * size to alloc for the mcast membership table 2634 * 2635 * This num_mcast_table_elems configuration parameter tells the 2636 * target how many peer elements it needs to provide storage for in 2637 * its multicast group membership table. 2638 * These multicast group membership table elements are shared by the 2639 * multicast groups stored within the table. 2640 */ 2641 __le32 num_mcast_table_elems; 2642 2643 /* 2644 * whether/how to do multicast->unicast conversion 2645 * 2646 * This configuration parameter specifies whether the target should 2647 * perform multicast --> unicast conversion on transmit, and if so, 2648 * what to do if it finds no entries in its multicast group 2649 * membership table for the multicast IP address in the tx frame. 2650 * Configuration value: 2651 * 0 -> Do not perform multicast to unicast conversion. 2652 * 1 -> Convert multicast frames to unicast, if the IP multicast 2653 * address from the tx frame is found in the multicast group 2654 * membership table. If the IP multicast address is not found, 2655 * drop the frame. 2656 * 2 -> Convert multicast frames to unicast, if the IP multicast 2657 * address from the tx frame is found in the multicast group 2658 * membership table. If the IP multicast address is not found, 2659 * transmit the frame as multicast. 2660 */ 2661 __le32 mcast2ucast_mode; 2662 2663 /* 2664 * how much memory to allocate for a tx PPDU dbg log 2665 * 2666 * This parameter controls how much memory the target will allocate 2667 * to store a log of tx PPDU meta-information (how large the PPDU 2668 * was, when it was sent, whether it was successful, etc.) 2669 */ 2670 __le32 tx_dbg_log_size; 2671 2672 /* how many AST entries to be allocated for WDS */ 2673 __le32 num_wds_entries; 2674 2675 /* 2676 * MAC DMA burst size, e.g., For target PCI limit can be 2677 * 0 -default, 1 256B 2678 */ 2679 __le32 dma_burst_size; 2680 2681 /* 2682 * Fixed delimiters to be inserted after every MPDU to 2683 * account for interface latency to avoid underrun. 2684 */ 2685 __le32 mac_aggr_delim; 2686 2687 /* 2688 * determine whether target is responsible for detecting duplicate 2689 * non-aggregate MPDU and timing out stale fragments. 2690 * 2691 * A-MPDU reordering is always performed on the target. 2692 * 2693 * 0: target responsible for frag timeout and dup checking 2694 * 1: host responsible for frag timeout and dup checking 2695 */ 2696 __le32 rx_skip_defrag_timeout_dup_detection_check; 2697 2698 /* 2699 * Configuration for VoW : 2700 * No of Video Nodes to be supported 2701 * and Max no of descriptors for each Video link (node). 2702 */ 2703 __le32 vow_config; 2704 2705 /* Number of msdu descriptors target should use */ 2706 __le32 num_msdu_desc; 2707 2708 /* 2709 * Max. number of Tx fragments per MSDU 2710 * This parameter controls the max number of Tx fragments per MSDU. 2711 * This is sent by the target as part of the WMI_SERVICE_READY event 2712 * and is overridden by the OS shim as required. 2713 */ 2714 __le32 max_frag_entries; 2715 } __packed; 2716 2717 enum wmi_10_2_feature_mask { 2718 WMI_10_2_RX_BATCH_MODE = BIT(0), 2719 WMI_10_2_ATF_CONFIG = BIT(1), 2720 WMI_10_2_COEX_GPIO = BIT(3), 2721 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2722 WMI_10_2_PEER_STATS = BIT(7), 2723 }; 2724 2725 struct wmi_resource_config_10_2 { 2726 struct wmi_resource_config_10x common; 2727 __le32 max_peer_ext_stats; 2728 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2729 __le32 bk_min_free; 2730 __le32 be_min_free; 2731 __le32 vi_min_free; 2732 __le32 vo_min_free; 2733 __le32 feature_mask; 2734 } __packed; 2735 2736 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2737 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2738 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2739 2740 struct wmi_resource_config_10_4 { 2741 /* Number of virtual devices (VAPs) to support */ 2742 __le32 num_vdevs; 2743 2744 /* Number of peer nodes to support */ 2745 __le32 num_peers; 2746 2747 /* Number of active peer nodes to support */ 2748 __le32 num_active_peers; 2749 2750 /* In offload mode, target supports features like WOW, chatter and other 2751 * protocol offloads. In order to support them some functionalities like 2752 * reorder buffering, PN checking need to be done in target. 2753 * This determines maximum number of peers supported by target in 2754 * offload mode. 2755 */ 2756 __le32 num_offload_peers; 2757 2758 /* Number of reorder buffers available for doing target based reorder 2759 * Rx reorder buffering 2760 */ 2761 __le32 num_offload_reorder_buffs; 2762 2763 /* Number of keys per peer */ 2764 __le32 num_peer_keys; 2765 2766 /* Total number of TX/RX data TIDs */ 2767 __le32 num_tids; 2768 2769 /* Max skid for resolving hash collisions. 2770 * The address search table is sparse, so that if two MAC addresses 2771 * result in the same hash value, the second of these conflicting 2772 * entries can slide to the next index in the address search table, 2773 * and use it, if it is unoccupied. This ast_skid_limit parameter 2774 * specifies the upper bound on how many subsequent indices to search 2775 * over to find an unoccupied space. 2776 */ 2777 __le32 ast_skid_limit; 2778 2779 /* The nominal chain mask for transmit. 2780 * The chain mask may be modified dynamically, e.g. to operate AP tx 2781 * with a reduced number of chains if no clients are associated. 2782 * This configuration parameter specifies the nominal chain-mask that 2783 * should be used when not operating with a reduced set of tx chains. 2784 */ 2785 __le32 tx_chain_mask; 2786 2787 /* The nominal chain mask for receive. 2788 * The chain mask may be modified dynamically, e.g. for a client to use 2789 * a reduced number of chains for receive if the traffic to the client 2790 * is low enough that it doesn't require downlink MIMO or antenna 2791 * diversity. This configuration parameter specifies the nominal 2792 * chain-mask that should be used when not operating with a reduced 2793 * set of rx chains. 2794 */ 2795 __le32 rx_chain_mask; 2796 2797 /* What rx reorder timeout (ms) to use for the AC. 2798 * Each WMM access class (voice, video, best-effort, background) will 2799 * have its own timeout value to dictate how long to wait for missing 2800 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2801 * been received. This parameter specifies the timeout in milliseconds 2802 * for each class. 2803 */ 2804 __le32 rx_timeout_pri[4]; 2805 2806 /* What mode the rx should decap packets to. 2807 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2808 * This setting also determines the default TX behavior, however TX 2809 * behavior can be modified on a per VAP basis during VAP init 2810 */ 2811 __le32 rx_decap_mode; 2812 2813 __le32 scan_max_pending_req; 2814 2815 __le32 bmiss_offload_max_vdev; 2816 2817 __le32 roam_offload_max_vdev; 2818 2819 __le32 roam_offload_max_ap_profiles; 2820 2821 /* How many groups to use for mcast->ucast conversion. 2822 * The target's WAL maintains a table to hold information regarding 2823 * which peers belong to a given multicast group, so that if 2824 * multicast->unicast conversion is enabled, the target can convert 2825 * multicast tx frames to a series of unicast tx frames, to each peer 2826 * within the multicast group. This num_mcast_groups configuration 2827 * parameter tells the target how many multicast groups to provide 2828 * storage for within its multicast group membership table. 2829 */ 2830 __le32 num_mcast_groups; 2831 2832 /* Size to alloc for the mcast membership table. 2833 * This num_mcast_table_elems configuration parameter tells the target 2834 * how many peer elements it needs to provide storage for in its 2835 * multicast group membership table. These multicast group membership 2836 * table elements are shared by the multicast groups stored within 2837 * the table. 2838 */ 2839 __le32 num_mcast_table_elems; 2840 2841 /* Whether/how to do multicast->unicast conversion. 2842 * This configuration parameter specifies whether the target should 2843 * perform multicast --> unicast conversion on transmit, and if so, 2844 * what to do if it finds no entries in its multicast group membership 2845 * table for the multicast IP address in the tx frame. 2846 * Configuration value: 2847 * 0 -> Do not perform multicast to unicast conversion. 2848 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2849 * from the tx frame is found in the multicast group membership 2850 * table. If the IP multicast address is not found, drop the frame 2851 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2852 * from the tx frame is found in the multicast group membership 2853 * table. If the IP multicast address is not found, transmit the 2854 * frame as multicast. 2855 */ 2856 __le32 mcast2ucast_mode; 2857 2858 /* How much memory to allocate for a tx PPDU dbg log. 2859 * This parameter controls how much memory the target will allocate to 2860 * store a log of tx PPDU meta-information (how large the PPDU was, 2861 * when it was sent, whether it was successful, etc.) 2862 */ 2863 __le32 tx_dbg_log_size; 2864 2865 /* How many AST entries to be allocated for WDS */ 2866 __le32 num_wds_entries; 2867 2868 /* MAC DMA burst size. 0 -default, 1 -256B */ 2869 __le32 dma_burst_size; 2870 2871 /* Fixed delimiters to be inserted after every MPDU to account for 2872 * interface latency to avoid underrun. 2873 */ 2874 __le32 mac_aggr_delim; 2875 2876 /* Determine whether target is responsible for detecting duplicate 2877 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2878 * is always performed on the target. 2879 * 2880 * 0: target responsible for frag timeout and dup checking 2881 * 1: host responsible for frag timeout and dup checking 2882 */ 2883 __le32 rx_skip_defrag_timeout_dup_detection_check; 2884 2885 /* Configuration for VoW : No of Video nodes to be supported and max 2886 * no of descriptors for each video link (node). 2887 */ 2888 __le32 vow_config; 2889 2890 /* Maximum vdev that could use gtk offload */ 2891 __le32 gtk_offload_max_vdev; 2892 2893 /* Number of msdu descriptors target should use */ 2894 __le32 num_msdu_desc; 2895 2896 /* Max number of tx fragments per MSDU. 2897 * This parameter controls the max number of tx fragments per MSDU. 2898 * This will passed by target as part of the WMI_SERVICE_READY event 2899 * and is overridden by the OS shim as required. 2900 */ 2901 __le32 max_frag_entries; 2902 2903 /* Max number of extended peer stats. 2904 * This parameter controls the max number of peers for which extended 2905 * statistics are supported by target 2906 */ 2907 __le32 max_peer_ext_stats; 2908 2909 /* Smart antenna capabilities information. 2910 * 1 - Smart antenna is enabled 2911 * 0 - Smart antenna is disabled 2912 * In future this can contain smart antenna specific capabilities. 2913 */ 2914 __le32 smart_ant_cap; 2915 2916 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2917 * during init. 2918 */ 2919 __le32 bk_minfree; 2920 __le32 be_minfree; 2921 __le32 vi_minfree; 2922 __le32 vo_minfree; 2923 2924 /* Rx batch mode capability. 2925 * 1 - Rx batch mode enabled 2926 * 0 - Rx batch mode disabled 2927 */ 2928 __le32 rx_batchmode; 2929 2930 /* Thermal throttling capability. 2931 * 1 - Capable of thermal throttling 2932 * 0 - Not capable of thermal throttling 2933 */ 2934 __le32 tt_support; 2935 2936 /* ATF configuration. 2937 * 1 - Enable ATF 2938 * 0 - Disable ATF 2939 */ 2940 __le32 atf_config; 2941 2942 /* Configure padding to manage IP header un-alignment 2943 * 1 - Enable padding 2944 * 0 - Disable padding 2945 */ 2946 __le32 iphdr_pad_config; 2947 2948 /* qwrap configuration (bits 15-0) 2949 * 1 - This is qwrap configuration 2950 * 0 - This is not qwrap 2951 * 2952 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2953 * In order to get ack-RSSI reporting and to specify the tx-rate for 2954 * individual frames, this option must be enabled. This uses an extra 2955 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2956 */ 2957 __le32 qwrap_config; 2958 } __packed; 2959 2960 enum wmi_coex_version { 2961 WMI_NO_COEX_VERSION_SUPPORT = 0, 2962 /* 3 wire coex support*/ 2963 WMI_COEX_VERSION_1 = 1, 2964 /* 2.5 wire coex support*/ 2965 WMI_COEX_VERSION_2 = 2, 2966 /* 2.5 wire coex with duty cycle support */ 2967 WMI_COEX_VERSION_3 = 3, 2968 /* 4 wire coex support*/ 2969 WMI_COEX_VERSION_4 = 4, 2970 }; 2971 2972 /** 2973 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2974 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2975 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2976 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2977 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2978 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2979 * @WMI_10_4_PEER_STATS: Per station stats 2980 * @WMI_10_4_VDEV_STATS: Per vdev stats 2981 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 2982 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 2983 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 2984 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 2985 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 2986 * enable/disable 2987 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable 2988 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable 2989 */ 2990 enum wmi_10_4_feature_mask { 2991 WMI_10_4_LTEU_SUPPORT = BIT(0), 2992 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2993 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2994 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2995 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2996 WMI_10_4_PEER_STATS = BIT(5), 2997 WMI_10_4_VDEV_STATS = BIT(6), 2998 WMI_10_4_TDLS = BIT(7), 2999 WMI_10_4_TDLS_OFFCHAN = BIT(8), 3000 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 3001 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 3002 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 3003 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 3004 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16), 3005 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17), 3006 WMI_10_4_REPORT_AIRTIME = BIT(18), 3007 3008 }; 3009 3010 struct wmi_ext_resource_config_10_4_cmd { 3011 /* contains enum wmi_host_platform_type */ 3012 __le32 host_platform_config; 3013 /* see enum wmi_10_4_feature_mask */ 3014 __le32 fw_feature_bitmap; 3015 /* WLAN priority GPIO number */ 3016 __le32 wlan_gpio_priority; 3017 /* see enum wmi_coex_version */ 3018 __le32 coex_version; 3019 /* COEX GPIO config */ 3020 __le32 coex_gpio_pin1; 3021 __le32 coex_gpio_pin2; 3022 __le32 coex_gpio_pin3; 3023 /* number of vdevs allowed to perform tdls */ 3024 __le32 num_tdls_vdevs; 3025 /* number of peers to track per TDLS vdev */ 3026 __le32 num_tdls_conn_table_entries; 3027 /* number of tdls sleep sta supported */ 3028 __le32 max_tdls_concurrent_sleep_sta; 3029 /* number of tdls buffer sta supported */ 3030 __le32 max_tdls_concurrent_buffer_sta; 3031 }; 3032 3033 /* structure describing host memory chunk. */ 3034 struct host_memory_chunk { 3035 /* id of the request that is passed up in service ready */ 3036 __le32 req_id; 3037 /* the physical address the memory chunk */ 3038 __le32 ptr; 3039 /* size of the chunk */ 3040 __le32 size; 3041 } __packed; 3042 3043 struct wmi_host_mem_chunks { 3044 __le32 count; 3045 /* some fw revisions require at least 1 chunk regardless of count */ 3046 struct host_memory_chunk items[1]; 3047 } __packed; 3048 3049 struct wmi_init_cmd { 3050 struct wmi_resource_config resource_config; 3051 struct wmi_host_mem_chunks mem_chunks; 3052 } __packed; 3053 3054 /* _10x structure is from 10.X FW API */ 3055 struct wmi_init_cmd_10x { 3056 struct wmi_resource_config_10x resource_config; 3057 struct wmi_host_mem_chunks mem_chunks; 3058 } __packed; 3059 3060 struct wmi_init_cmd_10_2 { 3061 struct wmi_resource_config_10_2 resource_config; 3062 struct wmi_host_mem_chunks mem_chunks; 3063 } __packed; 3064 3065 struct wmi_init_cmd_10_4 { 3066 struct wmi_resource_config_10_4 resource_config; 3067 struct wmi_host_mem_chunks mem_chunks; 3068 } __packed; 3069 3070 struct wmi_chan_list_entry { 3071 __le16 freq; 3072 u8 phy_mode; /* valid for 10.2 only */ 3073 u8 reserved; 3074 } __packed; 3075 3076 /* TLV for channel list */ 3077 struct wmi_chan_list { 3078 __le32 tag; /* WMI_CHAN_LIST_TAG */ 3079 __le32 num_chan; 3080 struct wmi_chan_list_entry channel_list[0]; 3081 } __packed; 3082 3083 struct wmi_bssid_list { 3084 __le32 tag; /* WMI_BSSID_LIST_TAG */ 3085 __le32 num_bssid; 3086 struct wmi_mac_addr bssid_list[0]; 3087 } __packed; 3088 3089 struct wmi_ie_data { 3090 __le32 tag; /* WMI_IE_TAG */ 3091 __le32 ie_len; 3092 u8 ie_data[0]; 3093 } __packed; 3094 3095 struct wmi_ssid { 3096 __le32 ssid_len; 3097 u8 ssid[32]; 3098 } __packed; 3099 3100 struct wmi_ssid_list { 3101 __le32 tag; /* WMI_SSID_LIST_TAG */ 3102 __le32 num_ssids; 3103 struct wmi_ssid ssids[0]; 3104 } __packed; 3105 3106 /* prefix used by scan requestor ids on the host */ 3107 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3108 3109 /* prefix used by scan request ids generated on the host */ 3110 /* host cycles through the lower 12 bits to generate ids */ 3111 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3112 3113 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3114 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3115 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3116 3117 /* Values lower than this may be refused by some firmware revisions with a scan 3118 * completion with a timedout reason. 3119 */ 3120 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3121 3122 /* Scan priority numbers must be sequential, starting with 0 */ 3123 enum wmi_scan_priority { 3124 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3125 WMI_SCAN_PRIORITY_LOW, 3126 WMI_SCAN_PRIORITY_MEDIUM, 3127 WMI_SCAN_PRIORITY_HIGH, 3128 WMI_SCAN_PRIORITY_VERY_HIGH, 3129 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3130 }; 3131 3132 struct wmi_start_scan_common { 3133 /* Scan ID */ 3134 __le32 scan_id; 3135 /* Scan requestor ID */ 3136 __le32 scan_req_id; 3137 /* VDEV id(interface) that is requesting scan */ 3138 __le32 vdev_id; 3139 /* Scan Priority, input to scan scheduler */ 3140 __le32 scan_priority; 3141 /* Scan events subscription */ 3142 __le32 notify_scan_events; 3143 /* dwell time in msec on active channels */ 3144 __le32 dwell_time_active; 3145 /* dwell time in msec on passive channels */ 3146 __le32 dwell_time_passive; 3147 /* 3148 * min time in msec on the BSS channel,only valid if atleast one 3149 * VDEV is active 3150 */ 3151 __le32 min_rest_time; 3152 /* 3153 * max rest time in msec on the BSS channel,only valid if at least 3154 * one VDEV is active 3155 */ 3156 /* 3157 * the scanner will rest on the bss channel at least min_rest_time 3158 * after min_rest_time the scanner will start checking for tx/rx 3159 * activity on all VDEVs. if there is no activity the scanner will 3160 * switch to off channel. if there is activity the scanner will let 3161 * the radio on the bss channel until max_rest_time expires.at 3162 * max_rest_time scanner will switch to off channel irrespective of 3163 * activity. activity is determined by the idle_time parameter. 3164 */ 3165 __le32 max_rest_time; 3166 /* 3167 * time before sending next set of probe requests. 3168 * The scanner keeps repeating probe requests transmission with 3169 * period specified by repeat_probe_time. 3170 * The number of probe requests specified depends on the ssid_list 3171 * and bssid_list 3172 */ 3173 __le32 repeat_probe_time; 3174 /* time in msec between 2 consequetive probe requests with in a set. */ 3175 __le32 probe_spacing_time; 3176 /* 3177 * data inactivity time in msec on bss channel that will be used by 3178 * scanner for measuring the inactivity. 3179 */ 3180 __le32 idle_time; 3181 /* maximum time in msec allowed for scan */ 3182 __le32 max_scan_time; 3183 /* 3184 * delay in msec before sending first probe request after switching 3185 * to a channel 3186 */ 3187 __le32 probe_delay; 3188 /* Scan control flags */ 3189 __le32 scan_ctrl_flags; 3190 } __packed; 3191 3192 struct wmi_start_scan_tlvs { 3193 /* TLV parameters. These includes channel list, ssid list, bssid list, 3194 * extra ies. 3195 */ 3196 u8 tlvs[0]; 3197 } __packed; 3198 3199 struct wmi_start_scan_cmd { 3200 struct wmi_start_scan_common common; 3201 __le32 burst_duration_ms; 3202 struct wmi_start_scan_tlvs tlvs; 3203 } __packed; 3204 3205 /* This is the definition from 10.X firmware branch */ 3206 struct wmi_10x_start_scan_cmd { 3207 struct wmi_start_scan_common common; 3208 struct wmi_start_scan_tlvs tlvs; 3209 } __packed; 3210 3211 struct wmi_ssid_arg { 3212 int len; 3213 const u8 *ssid; 3214 }; 3215 3216 struct wmi_bssid_arg { 3217 const u8 *bssid; 3218 }; 3219 3220 struct wmi_start_scan_arg { 3221 u32 scan_id; 3222 u32 scan_req_id; 3223 u32 vdev_id; 3224 u32 scan_priority; 3225 u32 notify_scan_events; 3226 u32 dwell_time_active; 3227 u32 dwell_time_passive; 3228 u32 min_rest_time; 3229 u32 max_rest_time; 3230 u32 repeat_probe_time; 3231 u32 probe_spacing_time; 3232 u32 idle_time; 3233 u32 max_scan_time; 3234 u32 probe_delay; 3235 u32 scan_ctrl_flags; 3236 u32 burst_duration_ms; 3237 3238 u32 ie_len; 3239 u32 n_channels; 3240 u32 n_ssids; 3241 u32 n_bssids; 3242 3243 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3244 u16 channels[64]; 3245 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3246 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3247 struct wmi_mac_addr mac_addr; 3248 struct wmi_mac_addr mac_mask; 3249 }; 3250 3251 /* scan control flags */ 3252 3253 /* passively scan all channels including active channels */ 3254 #define WMI_SCAN_FLAG_PASSIVE 0x1 3255 /* add wild card ssid probe request even though ssid_list is specified. */ 3256 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3257 /* add cck rates to rates/xrate ie for the generated probe request */ 3258 #define WMI_SCAN_ADD_CCK_RATES 0x4 3259 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3260 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3261 /* To enable indication of Chan load and Noise floor to host */ 3262 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3263 /* Filter Probe request frames */ 3264 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3265 /* When set, DFS channels will not be scanned */ 3266 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3267 /* Different FW scan engine may choose to bail out on errors. 3268 * Allow the driver to have influence over that. 3269 */ 3270 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3271 3272 /* Use random MAC address for TA for Probe Request frame and add 3273 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. 3274 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. 3275 */ 3276 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 3277 3278 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3279 #define WMI_SCAN_CLASS_MASK 0xFF000000 3280 3281 enum wmi_stop_scan_type { 3282 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3283 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3284 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3285 }; 3286 3287 struct wmi_stop_scan_cmd { 3288 __le32 scan_req_id; 3289 __le32 scan_id; 3290 __le32 req_type; 3291 __le32 vdev_id; 3292 } __packed; 3293 3294 struct wmi_stop_scan_arg { 3295 u32 req_id; 3296 enum wmi_stop_scan_type req_type; 3297 union { 3298 u32 scan_id; 3299 u32 vdev_id; 3300 } u; 3301 }; 3302 3303 struct wmi_scan_chan_list_cmd { 3304 __le32 num_scan_chans; 3305 struct wmi_channel chan_info[0]; 3306 } __packed; 3307 3308 struct wmi_scan_chan_list_arg { 3309 u32 n_channels; 3310 struct wmi_channel_arg *channels; 3311 }; 3312 3313 enum wmi_bss_filter { 3314 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3315 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3316 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3317 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3318 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3319 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3320 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3321 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3322 }; 3323 3324 enum wmi_scan_event_type { 3325 WMI_SCAN_EVENT_STARTED = BIT(0), 3326 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3327 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3328 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3329 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3330 /* possibly by high-prio scan */ 3331 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3332 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3333 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3334 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3335 WMI_SCAN_EVENT_MAX = BIT(15), 3336 }; 3337 3338 enum wmi_scan_completion_reason { 3339 WMI_SCAN_REASON_COMPLETED, 3340 WMI_SCAN_REASON_CANCELLED, 3341 WMI_SCAN_REASON_PREEMPTED, 3342 WMI_SCAN_REASON_TIMEDOUT, 3343 WMI_SCAN_REASON_INTERNAL_FAILURE, 3344 WMI_SCAN_REASON_MAX, 3345 }; 3346 3347 struct wmi_scan_event { 3348 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3349 __le32 reason; /* %WMI_SCAN_REASON_ */ 3350 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3351 __le32 scan_req_id; 3352 __le32 scan_id; 3353 __le32 vdev_id; 3354 } __packed; 3355 3356 /* 3357 * This defines how much headroom is kept in the 3358 * receive frame between the descriptor and the 3359 * payload, in order for the WMI PHY error and 3360 * management handler to insert header contents. 3361 * 3362 * This is in bytes. 3363 */ 3364 #define WMI_MGMT_RX_HDR_HEADROOM 52 3365 3366 /* 3367 * This event will be used for sending scan results 3368 * as well as rx mgmt frames to the host. The rx buffer 3369 * will be sent as part of this WMI event. It would be a 3370 * good idea to pass all the fields in the RX status 3371 * descriptor up to the host. 3372 */ 3373 struct wmi_mgmt_rx_hdr_v1 { 3374 __le32 channel; 3375 __le32 snr; 3376 __le32 rate; 3377 __le32 phy_mode; 3378 __le32 buf_len; 3379 __le32 status; /* %WMI_RX_STATUS_ */ 3380 } __packed; 3381 3382 struct wmi_mgmt_rx_hdr_v2 { 3383 struct wmi_mgmt_rx_hdr_v1 v1; 3384 __le32 rssi_ctl[4]; 3385 } __packed; 3386 3387 struct wmi_mgmt_rx_event_v1 { 3388 struct wmi_mgmt_rx_hdr_v1 hdr; 3389 u8 buf[0]; 3390 } __packed; 3391 3392 struct wmi_mgmt_rx_event_v2 { 3393 struct wmi_mgmt_rx_hdr_v2 hdr; 3394 u8 buf[0]; 3395 } __packed; 3396 3397 struct wmi_10_4_mgmt_rx_hdr { 3398 __le32 channel; 3399 __le32 snr; 3400 u8 rssi_ctl[4]; 3401 __le32 rate; 3402 __le32 phy_mode; 3403 __le32 buf_len; 3404 __le32 status; 3405 } __packed; 3406 3407 struct wmi_10_4_mgmt_rx_event { 3408 struct wmi_10_4_mgmt_rx_hdr hdr; 3409 u8 buf[0]; 3410 } __packed; 3411 3412 struct wmi_mgmt_rx_ext_info { 3413 __le64 rx_mac_timestamp; 3414 } __packed __aligned(4); 3415 3416 #define WMI_RX_STATUS_OK 0x00 3417 #define WMI_RX_STATUS_ERR_CRC 0x01 3418 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3419 #define WMI_RX_STATUS_ERR_MIC 0x10 3420 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3421 /* Extension data at the end of mgmt frame */ 3422 #define WMI_RX_STATUS_EXT_INFO 0x40 3423 3424 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3425 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3426 #define PHY_ERROR_GEN_RADAR 0x05 3427 3428 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3429 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3430 3431 enum phy_err_type { 3432 PHY_ERROR_UNKNOWN, 3433 PHY_ERROR_SPECTRAL_SCAN, 3434 PHY_ERROR_FALSE_RADAR_EXT, 3435 PHY_ERROR_RADAR 3436 }; 3437 3438 struct wmi_phyerr { 3439 __le32 tsf_timestamp; 3440 __le16 freq1; 3441 __le16 freq2; 3442 u8 rssi_combined; 3443 u8 chan_width_mhz; 3444 u8 phy_err_code; 3445 u8 rsvd0; 3446 __le32 rssi_chains[4]; 3447 __le16 nf_chains[4]; 3448 __le32 buf_len; 3449 u8 buf[0]; 3450 } __packed; 3451 3452 struct wmi_phyerr_event { 3453 __le32 num_phyerrs; 3454 __le32 tsf_l32; 3455 __le32 tsf_u32; 3456 struct wmi_phyerr phyerrs[0]; 3457 } __packed; 3458 3459 struct wmi_10_4_phyerr_event { 3460 __le32 tsf_l32; 3461 __le32 tsf_u32; 3462 __le16 freq1; 3463 __le16 freq2; 3464 u8 rssi_combined; 3465 u8 chan_width_mhz; 3466 u8 phy_err_code; 3467 u8 rsvd0; 3468 __le32 rssi_chains[4]; 3469 __le16 nf_chains[4]; 3470 __le32 phy_err_mask[2]; 3471 __le32 tsf_timestamp; 3472 __le32 buf_len; 3473 u8 buf[0]; 3474 } __packed; 3475 3476 struct wmi_radar_found_info { 3477 __le32 pri_min; 3478 __le32 pri_max; 3479 __le32 width_min; 3480 __le32 width_max; 3481 __le32 sidx_min; 3482 __le32 sidx_max; 3483 } __packed; 3484 3485 enum wmi_radar_confirmation_status { 3486 /* Detected radar was due to SW pulses */ 3487 WMI_SW_RADAR_DETECTED = 0, 3488 3489 WMI_RADAR_DETECTION_FAIL = 1, 3490 3491 /* Real radar detected */ 3492 WMI_HW_RADAR_DETECTED = 2, 3493 }; 3494 3495 #define PHYERR_TLV_SIG 0xBB 3496 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3497 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3498 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3499 3500 struct phyerr_radar_report { 3501 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3502 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3503 } __packed; 3504 3505 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3506 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3507 3508 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3509 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3510 3511 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3512 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3513 3514 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3515 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3516 3517 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3518 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3519 3520 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3521 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3522 3523 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3524 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3525 3526 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3527 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3528 3529 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3530 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3531 3532 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3533 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3534 3535 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3536 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3537 3538 struct phyerr_fft_report { 3539 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3540 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3541 } __packed; 3542 3543 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3544 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3545 3546 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3547 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3548 3549 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3550 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3551 3552 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3553 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3554 3555 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3556 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3557 3558 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3559 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3560 3561 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3562 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3563 3564 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3565 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3566 3567 struct phyerr_tlv { 3568 __le16 len; 3569 u8 tag; 3570 u8 sig; 3571 } __packed; 3572 3573 #define DFS_RSSI_POSSIBLY_FALSE 50 3574 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3575 3576 struct wmi_mgmt_tx_hdr { 3577 __le32 vdev_id; 3578 struct wmi_mac_addr peer_macaddr; 3579 __le32 tx_rate; 3580 __le32 tx_power; 3581 __le32 buf_len; 3582 } __packed; 3583 3584 struct wmi_mgmt_tx_cmd { 3585 struct wmi_mgmt_tx_hdr hdr; 3586 u8 buf[0]; 3587 } __packed; 3588 3589 struct wmi_echo_event { 3590 __le32 value; 3591 } __packed; 3592 3593 struct wmi_echo_cmd { 3594 __le32 value; 3595 } __packed; 3596 3597 struct wmi_pdev_set_regdomain_cmd { 3598 __le32 reg_domain; 3599 __le32 reg_domain_2G; 3600 __le32 reg_domain_5G; 3601 __le32 conformance_test_limit_2G; 3602 __le32 conformance_test_limit_5G; 3603 } __packed; 3604 3605 enum wmi_dfs_region { 3606 /* Uninitialized dfs domain */ 3607 WMI_UNINIT_DFS_DOMAIN = 0, 3608 3609 /* FCC3 dfs domain */ 3610 WMI_FCC_DFS_DOMAIN = 1, 3611 3612 /* ETSI dfs domain */ 3613 WMI_ETSI_DFS_DOMAIN = 2, 3614 3615 /*Japan dfs domain */ 3616 WMI_MKK4_DFS_DOMAIN = 3, 3617 }; 3618 3619 struct wmi_pdev_set_regdomain_cmd_10x { 3620 __le32 reg_domain; 3621 __le32 reg_domain_2G; 3622 __le32 reg_domain_5G; 3623 __le32 conformance_test_limit_2G; 3624 __le32 conformance_test_limit_5G; 3625 3626 /* dfs domain from wmi_dfs_region */ 3627 __le32 dfs_domain; 3628 } __packed; 3629 3630 /* Command to set/unset chip in quiet mode */ 3631 struct wmi_pdev_set_quiet_cmd { 3632 /* period in TUs */ 3633 __le32 period; 3634 3635 /* duration in TUs */ 3636 __le32 duration; 3637 3638 /* offset in TUs */ 3639 __le32 next_start; 3640 3641 /* enable/disable */ 3642 __le32 enabled; 3643 } __packed; 3644 3645 /* 3646 * 802.11g protection mode. 3647 */ 3648 enum ath10k_protmode { 3649 ATH10K_PROT_NONE = 0, /* no protection */ 3650 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3651 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3652 }; 3653 3654 enum wmi_rtscts_profile { 3655 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3656 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3657 WMI_RTSCTS_ACROSS_SW_RETRIES 3658 }; 3659 3660 #define WMI_RTSCTS_ENABLED 1 3661 #define WMI_RTSCTS_SET_MASK 0x0f 3662 #define WMI_RTSCTS_SET_LSB 0 3663 3664 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3665 #define WMI_RTSCTS_PROFILE_LSB 4 3666 3667 enum wmi_beacon_gen_mode { 3668 WMI_BEACON_STAGGERED_MODE = 0, 3669 WMI_BEACON_BURST_MODE = 1 3670 }; 3671 3672 enum wmi_csa_event_ies_present_flag { 3673 WMI_CSA_IE_PRESENT = 0x00000001, 3674 WMI_XCSA_IE_PRESENT = 0x00000002, 3675 WMI_WBW_IE_PRESENT = 0x00000004, 3676 WMI_CSWARP_IE_PRESENT = 0x00000008, 3677 }; 3678 3679 /* wmi CSA receive event from beacon frame */ 3680 struct wmi_csa_event { 3681 __le32 i_fc_dur; 3682 /* Bit 0-15: FC */ 3683 /* Bit 16-31: DUR */ 3684 struct wmi_mac_addr i_addr1; 3685 struct wmi_mac_addr i_addr2; 3686 __le32 csa_ie[2]; 3687 __le32 xcsa_ie[2]; 3688 __le32 wb_ie[2]; 3689 __le32 cswarp_ie; 3690 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3691 } __packed; 3692 3693 /* the definition of different PDEV parameters */ 3694 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3695 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3696 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3697 3698 struct wmi_pdev_param_map { 3699 u32 tx_chain_mask; 3700 u32 rx_chain_mask; 3701 u32 txpower_limit2g; 3702 u32 txpower_limit5g; 3703 u32 txpower_scale; 3704 u32 beacon_gen_mode; 3705 u32 beacon_tx_mode; 3706 u32 resmgr_offchan_mode; 3707 u32 protection_mode; 3708 u32 dynamic_bw; 3709 u32 non_agg_sw_retry_th; 3710 u32 agg_sw_retry_th; 3711 u32 sta_kickout_th; 3712 u32 ac_aggrsize_scaling; 3713 u32 ltr_enable; 3714 u32 ltr_ac_latency_be; 3715 u32 ltr_ac_latency_bk; 3716 u32 ltr_ac_latency_vi; 3717 u32 ltr_ac_latency_vo; 3718 u32 ltr_ac_latency_timeout; 3719 u32 ltr_sleep_override; 3720 u32 ltr_rx_override; 3721 u32 ltr_tx_activity_timeout; 3722 u32 l1ss_enable; 3723 u32 dsleep_enable; 3724 u32 pcielp_txbuf_flush; 3725 u32 pcielp_txbuf_watermark; 3726 u32 pcielp_txbuf_tmo_en; 3727 u32 pcielp_txbuf_tmo_value; 3728 u32 pdev_stats_update_period; 3729 u32 vdev_stats_update_period; 3730 u32 peer_stats_update_period; 3731 u32 bcnflt_stats_update_period; 3732 u32 pmf_qos; 3733 u32 arp_ac_override; 3734 u32 dcs; 3735 u32 ani_enable; 3736 u32 ani_poll_period; 3737 u32 ani_listen_period; 3738 u32 ani_ofdm_level; 3739 u32 ani_cck_level; 3740 u32 dyntxchain; 3741 u32 proxy_sta; 3742 u32 idle_ps_config; 3743 u32 power_gating_sleep; 3744 u32 fast_channel_reset; 3745 u32 burst_dur; 3746 u32 burst_enable; 3747 u32 cal_period; 3748 u32 aggr_burst; 3749 u32 rx_decap_mode; 3750 u32 smart_antenna_default_antenna; 3751 u32 igmpmld_override; 3752 u32 igmpmld_tid; 3753 u32 antenna_gain; 3754 u32 rx_filter; 3755 u32 set_mcast_to_ucast_tid; 3756 u32 proxy_sta_mode; 3757 u32 set_mcast2ucast_mode; 3758 u32 set_mcast2ucast_buffer; 3759 u32 remove_mcast2ucast_buffer; 3760 u32 peer_sta_ps_statechg_enable; 3761 u32 igmpmld_ac_override; 3762 u32 block_interbss; 3763 u32 set_disable_reset_cmdid; 3764 u32 set_msdu_ttl_cmdid; 3765 u32 set_ppdu_duration_cmdid; 3766 u32 txbf_sound_period_cmdid; 3767 u32 set_promisc_mode_cmdid; 3768 u32 set_burst_mode_cmdid; 3769 u32 en_stats; 3770 u32 mu_group_policy; 3771 u32 noise_detection; 3772 u32 noise_threshold; 3773 u32 dpd_enable; 3774 u32 set_mcast_bcast_echo; 3775 u32 atf_strict_sch; 3776 u32 atf_sched_duration; 3777 u32 ant_plzn; 3778 u32 mgmt_retry_limit; 3779 u32 sensitivity_level; 3780 u32 signed_txpower_2g; 3781 u32 signed_txpower_5g; 3782 u32 enable_per_tid_amsdu; 3783 u32 enable_per_tid_ampdu; 3784 u32 cca_threshold; 3785 u32 rts_fixed_rate; 3786 u32 pdev_reset; 3787 u32 wapi_mbssid_offset; 3788 u32 arp_srcaddr; 3789 u32 arp_dstaddr; 3790 u32 enable_btcoex; 3791 u32 rfkill_config; 3792 u32 rfkill_enable; 3793 }; 3794 3795 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3796 3797 enum wmi_pdev_param { 3798 /* TX chain mask */ 3799 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3800 /* RX chain mask */ 3801 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3802 /* TX power limit for 2G Radio */ 3803 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3804 /* TX power limit for 5G Radio */ 3805 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3806 /* TX power scale */ 3807 WMI_PDEV_PARAM_TXPOWER_SCALE, 3808 /* Beacon generation mode . 0: host, 1: target */ 3809 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3810 /* Beacon generation mode . 0: staggered 1: bursted */ 3811 WMI_PDEV_PARAM_BEACON_TX_MODE, 3812 /* 3813 * Resource manager off chan mode . 3814 * 0: turn off off chan mode. 1: turn on offchan mode 3815 */ 3816 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3817 /* 3818 * Protection mode: 3819 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3820 */ 3821 WMI_PDEV_PARAM_PROTECTION_MODE, 3822 /* 3823 * Dynamic bandwidth - 0: disable, 1: enable 3824 * 3825 * When enabled HW rate control tries different bandwidths when 3826 * retransmitting frames. 3827 */ 3828 WMI_PDEV_PARAM_DYNAMIC_BW, 3829 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3830 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3831 /* aggregrate sw retry threshold. 0-disable*/ 3832 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3833 /* Station kickout threshold (non of consecutive failures).0-disable */ 3834 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3835 /* Aggerate size scaling configuration per AC */ 3836 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3837 /* LTR enable */ 3838 WMI_PDEV_PARAM_LTR_ENABLE, 3839 /* LTR latency for BE, in us */ 3840 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3841 /* LTR latency for BK, in us */ 3842 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3843 /* LTR latency for VI, in us */ 3844 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3845 /* LTR latency for VO, in us */ 3846 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3847 /* LTR AC latency timeout, in ms */ 3848 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3849 /* LTR platform latency override, in us */ 3850 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3851 /* LTR-RX override, in us */ 3852 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3853 /* Tx activity timeout for LTR, in us */ 3854 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3855 /* L1SS state machine enable */ 3856 WMI_PDEV_PARAM_L1SS_ENABLE, 3857 /* Deep sleep state machine enable */ 3858 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3859 /* RX buffering flush enable */ 3860 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3861 /* RX buffering matermark */ 3862 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3863 /* RX buffering timeout enable */ 3864 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3865 /* RX buffering timeout value */ 3866 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3867 /* pdev level stats update period in ms */ 3868 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3869 /* vdev level stats update period in ms */ 3870 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3871 /* peer level stats update period in ms */ 3872 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3873 /* beacon filter status update period */ 3874 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3875 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3876 WMI_PDEV_PARAM_PMF_QOS, 3877 /* Access category on which ARP frames are sent */ 3878 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3879 /* DCS configuration */ 3880 WMI_PDEV_PARAM_DCS, 3881 /* Enable/Disable ANI on target */ 3882 WMI_PDEV_PARAM_ANI_ENABLE, 3883 /* configure the ANI polling period */ 3884 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3885 /* configure the ANI listening period */ 3886 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3887 /* configure OFDM immunity level */ 3888 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3889 /* configure CCK immunity level */ 3890 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3891 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3892 WMI_PDEV_PARAM_DYNTXCHAIN, 3893 /* Enable/Disable proxy STA */ 3894 WMI_PDEV_PARAM_PROXY_STA, 3895 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3896 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3897 /* Enable/Disable power gating sleep */ 3898 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3899 }; 3900 3901 enum wmi_10x_pdev_param { 3902 /* TX chian mask */ 3903 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3904 /* RX chian mask */ 3905 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3906 /* TX power limit for 2G Radio */ 3907 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3908 /* TX power limit for 5G Radio */ 3909 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3910 /* TX power scale */ 3911 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3912 /* Beacon generation mode . 0: host, 1: target */ 3913 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3914 /* Beacon generation mode . 0: staggered 1: bursted */ 3915 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3916 /* 3917 * Resource manager off chan mode . 3918 * 0: turn off off chan mode. 1: turn on offchan mode 3919 */ 3920 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3921 /* 3922 * Protection mode: 3923 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3924 */ 3925 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3926 /* Dynamic bandwidth 0: disable 1: enable */ 3927 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3928 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3929 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3930 /* aggregrate sw retry threshold. 0-disable*/ 3931 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3932 /* Station kickout threshold (non of consecutive failures).0-disable */ 3933 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3934 /* Aggerate size scaling configuration per AC */ 3935 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3936 /* LTR enable */ 3937 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3938 /* LTR latency for BE, in us */ 3939 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3940 /* LTR latency for BK, in us */ 3941 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3942 /* LTR latency for VI, in us */ 3943 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3944 /* LTR latency for VO, in us */ 3945 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3946 /* LTR AC latency timeout, in ms */ 3947 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3948 /* LTR platform latency override, in us */ 3949 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3950 /* LTR-RX override, in us */ 3951 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3952 /* Tx activity timeout for LTR, in us */ 3953 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3954 /* L1SS state machine enable */ 3955 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3956 /* Deep sleep state machine enable */ 3957 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3958 /* pdev level stats update period in ms */ 3959 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3960 /* vdev level stats update period in ms */ 3961 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3962 /* peer level stats update period in ms */ 3963 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3964 /* beacon filter status update period */ 3965 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3966 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3967 WMI_10X_PDEV_PARAM_PMF_QOS, 3968 /* Access category on which ARP and DHCP frames are sent */ 3969 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3970 /* DCS configuration */ 3971 WMI_10X_PDEV_PARAM_DCS, 3972 /* Enable/Disable ANI on target */ 3973 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3974 /* configure the ANI polling period */ 3975 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3976 /* configure the ANI listening period */ 3977 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3978 /* configure OFDM immunity level */ 3979 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3980 /* configure CCK immunity level */ 3981 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3982 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3983 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3984 /* Enable/Disable Fast channel reset*/ 3985 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3986 /* Set Bursting DUR */ 3987 WMI_10X_PDEV_PARAM_BURST_DUR, 3988 /* Set Bursting Enable*/ 3989 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3990 3991 /* following are available as of firmware 10.2 */ 3992 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3993 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3994 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3995 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3996 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3997 WMI_10X_PDEV_PARAM_RX_FILTER, 3998 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3999 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 4000 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4001 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4002 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4003 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 4004 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 4005 WMI_10X_PDEV_PARAM_CAL_PERIOD, 4006 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH, 4007 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION, 4008 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4009 WMI_10X_PDEV_PARAM_PDEV_RESET 4010 }; 4011 4012 enum wmi_10_4_pdev_param { 4013 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 4014 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 4015 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 4016 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 4017 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 4018 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 4019 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 4020 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 4021 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 4022 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 4023 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 4024 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 4025 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 4026 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 4027 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 4028 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 4029 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 4030 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 4031 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 4032 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 4033 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 4034 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 4035 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 4036 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 4037 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 4038 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 4039 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 4040 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 4041 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 4042 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 4043 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 4044 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 4045 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 4046 WMI_10_4_PDEV_PARAM_PMF_QOS, 4047 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 4048 WMI_10_4_PDEV_PARAM_DCS, 4049 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 4050 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 4051 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 4052 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 4053 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 4054 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 4055 WMI_10_4_PDEV_PARAM_PROXY_STA, 4056 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 4057 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 4058 WMI_10_4_PDEV_PARAM_AGGR_BURST, 4059 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 4060 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 4061 WMI_10_4_PDEV_PARAM_BURST_DUR, 4062 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 4063 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 4064 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 4065 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 4066 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 4067 WMI_10_4_PDEV_PARAM_RX_FILTER, 4068 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 4069 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 4070 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4071 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4072 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4073 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 4074 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 4075 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 4076 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 4077 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 4078 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 4079 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 4080 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4081 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 4082 WMI_10_4_PDEV_PARAM_EN_STATS, 4083 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 4084 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 4085 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 4086 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 4087 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 4088 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 4089 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 4090 WMI_10_4_PDEV_PARAM_ANT_PLZN, 4091 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 4092 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 4093 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 4094 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 4095 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 4096 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 4097 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 4098 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 4099 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 4100 WMI_10_4_PDEV_PARAM_PDEV_RESET, 4101 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 4102 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 4103 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 4104 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 4105 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 4106 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 4107 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 4108 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 4109 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 4110 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 4111 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 4112 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 4113 }; 4114 4115 struct wmi_pdev_set_param_cmd { 4116 __le32 param_id; 4117 __le32 param_value; 4118 } __packed; 4119 4120 struct wmi_pdev_set_base_macaddr_cmd { 4121 struct wmi_mac_addr mac_addr; 4122 } __packed; 4123 4124 /* valid period is 1 ~ 60000ms, unit in millisecond */ 4125 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 4126 4127 struct wmi_pdev_get_tpc_config_cmd { 4128 /* parameter */ 4129 __le32 param; 4130 } __packed; 4131 4132 #define WMI_TPC_CONFIG_PARAM 1 4133 #define WMI_TPC_FINAL_RATE_MAX 240 4134 #define WMI_TPC_TX_N_CHAIN 4 4135 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) 4136 #define WMI_TPC_PREAM_TABLE_MAX 10 4137 #define WMI_TPC_FLAG 3 4138 #define WMI_TPC_BUF_SIZE 10 4139 #define WMI_TPC_BEAMFORMING 2 4140 4141 enum wmi_tpc_table_type { 4142 WMI_TPC_TABLE_TYPE_CDD = 0, 4143 WMI_TPC_TABLE_TYPE_STBC = 1, 4144 WMI_TPC_TABLE_TYPE_TXBF = 2, 4145 }; 4146 4147 enum wmi_tpc_config_event_flag { 4148 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4149 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4150 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4151 }; 4152 4153 struct wmi_pdev_tpc_config_event { 4154 __le32 reg_domain; 4155 __le32 chan_freq; 4156 __le32 phy_mode; 4157 __le32 twice_antenna_reduction; 4158 __le32 twice_max_rd_power; 4159 a_sle32 twice_antenna_gain; 4160 __le32 power_limit; 4161 __le32 rate_max; 4162 __le32 num_tx_chain; 4163 __le32 ctl; 4164 __le32 flags; 4165 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4166 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4167 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4168 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4169 u8 rates_array[WMI_TPC_RATE_MAX]; 4170 } __packed; 4171 4172 /* Transmit power scale factor. */ 4173 enum wmi_tp_scale { 4174 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4175 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4176 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4177 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4178 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4179 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4180 }; 4181 4182 struct wmi_pdev_tpc_final_table_event { 4183 __le32 reg_domain; 4184 __le32 chan_freq; 4185 __le32 phy_mode; 4186 __le32 twice_antenna_reduction; 4187 __le32 twice_max_rd_power; 4188 a_sle32 twice_antenna_gain; 4189 __le32 power_limit; 4190 __le32 rate_max; 4191 __le32 num_tx_chain; 4192 __le32 ctl; 4193 __le32 flags; 4194 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4195 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4196 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4197 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4198 u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; 4199 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] 4200 [WMI_TPC_TX_N_CHAIN]; 4201 } __packed; 4202 4203 struct wmi_pdev_get_tpc_table_cmd { 4204 __le32 param; 4205 } __packed; 4206 4207 enum wmi_tpc_pream_2ghz { 4208 WMI_TPC_PREAM_2GHZ_CCK = 0, 4209 WMI_TPC_PREAM_2GHZ_OFDM, 4210 WMI_TPC_PREAM_2GHZ_HT20, 4211 WMI_TPC_PREAM_2GHZ_HT40, 4212 WMI_TPC_PREAM_2GHZ_VHT20, 4213 WMI_TPC_PREAM_2GHZ_VHT40, 4214 WMI_TPC_PREAM_2GHZ_VHT80, 4215 }; 4216 4217 enum wmi_tpc_pream_5ghz { 4218 WMI_TPC_PREAM_5GHZ_OFDM = 1, 4219 WMI_TPC_PREAM_5GHZ_HT20, 4220 WMI_TPC_PREAM_5GHZ_HT40, 4221 WMI_TPC_PREAM_5GHZ_VHT20, 4222 WMI_TPC_PREAM_5GHZ_VHT40, 4223 WMI_TPC_PREAM_5GHZ_VHT80, 4224 WMI_TPC_PREAM_5GHZ_HTCUP, 4225 }; 4226 4227 #define WMI_PEER_PS_STATE_DISABLED 2 4228 4229 struct wmi_peer_sta_ps_state_chg_event { 4230 struct wmi_mac_addr peer_macaddr; 4231 __le32 peer_ps_state; 4232 } __packed; 4233 4234 struct wmi_pdev_chanlist_update_event { 4235 /* number of channels */ 4236 __le32 num_chan; 4237 /* array of channels */ 4238 struct wmi_channel channel_list[1]; 4239 } __packed; 4240 4241 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4242 4243 struct wmi_debug_mesg_event { 4244 /* message buffer, NULL terminated */ 4245 char bufp[WMI_MAX_DEBUG_MESG]; 4246 } __packed; 4247 4248 enum { 4249 /* P2P device */ 4250 VDEV_SUBTYPE_P2PDEV = 0, 4251 /* P2P client */ 4252 VDEV_SUBTYPE_P2PCLI, 4253 /* P2P GO */ 4254 VDEV_SUBTYPE_P2PGO, 4255 /* BT3.0 HS */ 4256 VDEV_SUBTYPE_BT, 4257 }; 4258 4259 struct wmi_pdev_set_channel_cmd { 4260 /* idnore power , only use flags , mode and freq */ 4261 struct wmi_channel chan; 4262 } __packed; 4263 4264 struct wmi_pdev_pktlog_enable_cmd { 4265 __le32 ev_bitmap; 4266 } __packed; 4267 4268 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4269 #define WMI_DSCP_MAP_MAX (64) 4270 struct wmi_pdev_set_dscp_tid_map_cmd { 4271 /* map indicating DSCP to TID conversion */ 4272 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4273 } __packed; 4274 4275 enum mcast_bcast_rate_id { 4276 WMI_SET_MCAST_RATE, 4277 WMI_SET_BCAST_RATE 4278 }; 4279 4280 struct mcast_bcast_rate { 4281 enum mcast_bcast_rate_id rate_id; 4282 __le32 rate; 4283 } __packed; 4284 4285 struct wmi_wmm_params { 4286 __le32 cwmin; 4287 __le32 cwmax; 4288 __le32 aifs; 4289 __le32 txop; 4290 __le32 acm; 4291 __le32 no_ack; 4292 } __packed; 4293 4294 struct wmi_pdev_set_wmm_params { 4295 struct wmi_wmm_params ac_be; 4296 struct wmi_wmm_params ac_bk; 4297 struct wmi_wmm_params ac_vi; 4298 struct wmi_wmm_params ac_vo; 4299 } __packed; 4300 4301 struct wmi_wmm_params_arg { 4302 u32 cwmin; 4303 u32 cwmax; 4304 u32 aifs; 4305 u32 txop; 4306 u32 acm; 4307 u32 no_ack; 4308 }; 4309 4310 struct wmi_wmm_params_all_arg { 4311 struct wmi_wmm_params_arg ac_be; 4312 struct wmi_wmm_params_arg ac_bk; 4313 struct wmi_wmm_params_arg ac_vi; 4314 struct wmi_wmm_params_arg ac_vo; 4315 }; 4316 4317 struct wmi_pdev_stats_tx { 4318 /* Num HTT cookies queued to dispatch list */ 4319 __le32 comp_queued; 4320 4321 /* Num HTT cookies dispatched */ 4322 __le32 comp_delivered; 4323 4324 /* Num MSDU queued to WAL */ 4325 __le32 msdu_enqued; 4326 4327 /* Num MPDU queue to WAL */ 4328 __le32 mpdu_enqued; 4329 4330 /* Num MSDUs dropped by WMM limit */ 4331 __le32 wmm_drop; 4332 4333 /* Num Local frames queued */ 4334 __le32 local_enqued; 4335 4336 /* Num Local frames done */ 4337 __le32 local_freed; 4338 4339 /* Num queued to HW */ 4340 __le32 hw_queued; 4341 4342 /* Num PPDU reaped from HW */ 4343 __le32 hw_reaped; 4344 4345 /* Num underruns */ 4346 __le32 underrun; 4347 4348 /* Num PPDUs cleaned up in TX abort */ 4349 __le32 tx_abort; 4350 4351 /* Num MPDUs requed by SW */ 4352 __le32 mpdus_requed; 4353 4354 /* excessive retries */ 4355 __le32 tx_ko; 4356 4357 /* data hw rate code */ 4358 __le32 data_rc; 4359 4360 /* Scheduler self triggers */ 4361 __le32 self_triggers; 4362 4363 /* frames dropped due to excessive sw retries */ 4364 __le32 sw_retry_failure; 4365 4366 /* illegal rate phy errors */ 4367 __le32 illgl_rate_phy_err; 4368 4369 /* wal pdev continuous xretry */ 4370 __le32 pdev_cont_xretry; 4371 4372 /* wal pdev continous xretry */ 4373 __le32 pdev_tx_timeout; 4374 4375 /* wal pdev resets */ 4376 __le32 pdev_resets; 4377 4378 /* frames dropped due to non-availability of stateless TIDs */ 4379 __le32 stateless_tid_alloc_failure; 4380 4381 __le32 phy_underrun; 4382 4383 /* MPDU is more than txop limit */ 4384 __le32 txop_ovf; 4385 } __packed; 4386 4387 struct wmi_10_4_pdev_stats_tx { 4388 /* Num HTT cookies queued to dispatch list */ 4389 __le32 comp_queued; 4390 4391 /* Num HTT cookies dispatched */ 4392 __le32 comp_delivered; 4393 4394 /* Num MSDU queued to WAL */ 4395 __le32 msdu_enqued; 4396 4397 /* Num MPDU queue to WAL */ 4398 __le32 mpdu_enqued; 4399 4400 /* Num MSDUs dropped by WMM limit */ 4401 __le32 wmm_drop; 4402 4403 /* Num Local frames queued */ 4404 __le32 local_enqued; 4405 4406 /* Num Local frames done */ 4407 __le32 local_freed; 4408 4409 /* Num queued to HW */ 4410 __le32 hw_queued; 4411 4412 /* Num PPDU reaped from HW */ 4413 __le32 hw_reaped; 4414 4415 /* Num underruns */ 4416 __le32 underrun; 4417 4418 /* HW Paused. */ 4419 __le32 hw_paused; 4420 4421 /* Num PPDUs cleaned up in TX abort */ 4422 __le32 tx_abort; 4423 4424 /* Num MPDUs requed by SW */ 4425 __le32 mpdus_requed; 4426 4427 /* excessive retries */ 4428 __le32 tx_ko; 4429 4430 /* data hw rate code */ 4431 __le32 data_rc; 4432 4433 /* Scheduler self triggers */ 4434 __le32 self_triggers; 4435 4436 /* frames dropped due to excessive sw retries */ 4437 __le32 sw_retry_failure; 4438 4439 /* illegal rate phy errors */ 4440 __le32 illgl_rate_phy_err; 4441 4442 /* wal pdev continuous xretry */ 4443 __le32 pdev_cont_xretry; 4444 4445 /* wal pdev tx timeouts */ 4446 __le32 pdev_tx_timeout; 4447 4448 /* wal pdev resets */ 4449 __le32 pdev_resets; 4450 4451 /* frames dropped due to non-availability of stateless TIDs */ 4452 __le32 stateless_tid_alloc_failure; 4453 4454 __le32 phy_underrun; 4455 4456 /* MPDU is more than txop limit */ 4457 __le32 txop_ovf; 4458 4459 /* Number of Sequences posted */ 4460 __le32 seq_posted; 4461 4462 /* Number of Sequences failed queueing */ 4463 __le32 seq_failed_queueing; 4464 4465 /* Number of Sequences completed */ 4466 __le32 seq_completed; 4467 4468 /* Number of Sequences restarted */ 4469 __le32 seq_restarted; 4470 4471 /* Number of MU Sequences posted */ 4472 __le32 mu_seq_posted; 4473 4474 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4475 __le32 mpdus_sw_flush; 4476 4477 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4478 __le32 mpdus_hw_filter; 4479 4480 /* Num MPDUs truncated by PDG 4481 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4482 */ 4483 __le32 mpdus_truncated; 4484 4485 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4486 __le32 mpdus_ack_failed; 4487 4488 /* Num MPDUs that was dropped due to expiry. */ 4489 __le32 mpdus_expired; 4490 } __packed; 4491 4492 struct wmi_pdev_stats_rx { 4493 /* Cnts any change in ring routing mid-ppdu */ 4494 __le32 mid_ppdu_route_change; 4495 4496 /* Total number of statuses processed */ 4497 __le32 status_rcvd; 4498 4499 /* Extra frags on rings 0-3 */ 4500 __le32 r0_frags; 4501 __le32 r1_frags; 4502 __le32 r2_frags; 4503 __le32 r3_frags; 4504 4505 /* MSDUs / MPDUs delivered to HTT */ 4506 __le32 htt_msdus; 4507 __le32 htt_mpdus; 4508 4509 /* MSDUs / MPDUs delivered to local stack */ 4510 __le32 loc_msdus; 4511 __le32 loc_mpdus; 4512 4513 /* AMSDUs that have more MSDUs than the status ring size */ 4514 __le32 oversize_amsdu; 4515 4516 /* Number of PHY errors */ 4517 __le32 phy_errs; 4518 4519 /* Number of PHY errors drops */ 4520 __le32 phy_err_drop; 4521 4522 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4523 __le32 mpdu_errs; 4524 } __packed; 4525 4526 struct wmi_pdev_stats_peer { 4527 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4528 __le32 dummy; 4529 } __packed; 4530 4531 enum wmi_stats_id { 4532 WMI_STAT_PEER = BIT(0), 4533 WMI_STAT_AP = BIT(1), 4534 WMI_STAT_PDEV = BIT(2), 4535 WMI_STAT_VDEV = BIT(3), 4536 WMI_STAT_BCNFLT = BIT(4), 4537 WMI_STAT_VDEV_RATE = BIT(5), 4538 }; 4539 4540 enum wmi_10_4_stats_id { 4541 WMI_10_4_STAT_PEER = BIT(0), 4542 WMI_10_4_STAT_AP = BIT(1), 4543 WMI_10_4_STAT_INST = BIT(2), 4544 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4545 WMI_10_4_STAT_VDEV_EXTD = BIT(4), 4546 }; 4547 4548 enum wmi_tlv_stats_id { 4549 WMI_TLV_STAT_PEER = BIT(0), 4550 WMI_TLV_STAT_AP = BIT(1), 4551 WMI_TLV_STAT_PDEV = BIT(2), 4552 WMI_TLV_STAT_VDEV = BIT(3), 4553 WMI_TLV_STAT_PEER_EXTD = BIT(10), 4554 }; 4555 4556 struct wlan_inst_rssi_args { 4557 __le16 cfg_retry_count; 4558 __le16 retry_count; 4559 }; 4560 4561 struct wmi_request_stats_cmd { 4562 __le32 stats_id; 4563 4564 __le32 vdev_id; 4565 4566 /* peer MAC address */ 4567 struct wmi_mac_addr peer_macaddr; 4568 4569 /* Instantaneous RSSI arguments */ 4570 struct wlan_inst_rssi_args inst_rssi_args; 4571 } __packed; 4572 4573 /* Suspend option */ 4574 enum { 4575 /* suspend */ 4576 WMI_PDEV_SUSPEND, 4577 4578 /* suspend and disable all interrupts */ 4579 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4580 }; 4581 4582 struct wmi_pdev_suspend_cmd { 4583 /* suspend option sent to target */ 4584 __le32 suspend_opt; 4585 } __packed; 4586 4587 struct wmi_stats_event { 4588 __le32 stats_id; /* WMI_STAT_ */ 4589 /* 4590 * number of pdev stats event structures 4591 * (wmi_pdev_stats) 0 or 1 4592 */ 4593 __le32 num_pdev_stats; 4594 /* 4595 * number of vdev stats event structures 4596 * (wmi_vdev_stats) 0 or max vdevs 4597 */ 4598 __le32 num_vdev_stats; 4599 /* 4600 * number of peer stats event structures 4601 * (wmi_peer_stats) 0 or max peers 4602 */ 4603 __le32 num_peer_stats; 4604 __le32 num_bcnflt_stats; 4605 /* 4606 * followed by 4607 * num_pdev_stats * size of(struct wmi_pdev_stats) 4608 * num_vdev_stats * size of(struct wmi_vdev_stats) 4609 * num_peer_stats * size of(struct wmi_peer_stats) 4610 * 4611 * By having a zero sized array, the pointer to data area 4612 * becomes available without increasing the struct size 4613 */ 4614 u8 data[0]; 4615 } __packed; 4616 4617 struct wmi_10_2_stats_event { 4618 __le32 stats_id; /* %WMI_REQUEST_ */ 4619 __le32 num_pdev_stats; 4620 __le32 num_pdev_ext_stats; 4621 __le32 num_vdev_stats; 4622 __le32 num_peer_stats; 4623 __le32 num_bcnflt_stats; 4624 u8 data[0]; 4625 } __packed; 4626 4627 /* 4628 * PDEV statistics 4629 * TODO: add all PDEV stats here 4630 */ 4631 struct wmi_pdev_stats_base { 4632 __le32 chan_nf; 4633 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4634 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4635 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4636 __le32 cycle_count; /* Total on-channel time */ 4637 __le32 phy_err_count; 4638 __le32 chan_tx_pwr; 4639 } __packed; 4640 4641 struct wmi_pdev_stats { 4642 struct wmi_pdev_stats_base base; 4643 struct wmi_pdev_stats_tx tx; 4644 struct wmi_pdev_stats_rx rx; 4645 struct wmi_pdev_stats_peer peer; 4646 } __packed; 4647 4648 struct wmi_pdev_stats_extra { 4649 __le32 ack_rx_bad; 4650 __le32 rts_bad; 4651 __le32 rts_good; 4652 __le32 fcs_bad; 4653 __le32 no_beacons; 4654 __le32 mib_int_count; 4655 } __packed; 4656 4657 struct wmi_10x_pdev_stats { 4658 struct wmi_pdev_stats_base base; 4659 struct wmi_pdev_stats_tx tx; 4660 struct wmi_pdev_stats_rx rx; 4661 struct wmi_pdev_stats_peer peer; 4662 struct wmi_pdev_stats_extra extra; 4663 } __packed; 4664 4665 struct wmi_pdev_stats_mem { 4666 __le32 dram_free; 4667 __le32 iram_free; 4668 } __packed; 4669 4670 struct wmi_10_2_pdev_stats { 4671 struct wmi_pdev_stats_base base; 4672 struct wmi_pdev_stats_tx tx; 4673 __le32 mc_drop; 4674 struct wmi_pdev_stats_rx rx; 4675 __le32 pdev_rx_timeout; 4676 struct wmi_pdev_stats_mem mem; 4677 struct wmi_pdev_stats_peer peer; 4678 struct wmi_pdev_stats_extra extra; 4679 } __packed; 4680 4681 struct wmi_10_4_pdev_stats { 4682 struct wmi_pdev_stats_base base; 4683 struct wmi_10_4_pdev_stats_tx tx; 4684 struct wmi_pdev_stats_rx rx; 4685 __le32 rx_ovfl_errs; 4686 struct wmi_pdev_stats_mem mem; 4687 __le32 sram_free_size; 4688 struct wmi_pdev_stats_extra extra; 4689 } __packed; 4690 4691 /* 4692 * VDEV statistics 4693 */ 4694 4695 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) 4696 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 4697 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff 4698 4699 struct wmi_vdev_stats { 4700 __le32 vdev_id; 4701 } __packed; 4702 4703 struct wmi_vdev_stats_extd { 4704 __le32 vdev_id; 4705 __le32 ppdu_aggr_cnt; 4706 __le32 ppdu_noack; 4707 __le32 mpdu_queued; 4708 __le32 ppdu_nonaggr_cnt; 4709 __le32 mpdu_sw_requeued; 4710 __le32 mpdu_suc_retry; 4711 __le32 mpdu_suc_multitry; 4712 __le32 mpdu_fail_retry; 4713 __le32 tx_ftm_suc; 4714 __le32 tx_ftm_suc_retry; 4715 __le32 tx_ftm_fail; 4716 __le32 rx_ftmr_cnt; 4717 __le32 rx_ftmr_dup_cnt; 4718 __le32 rx_iftmr_cnt; 4719 __le32 rx_iftmr_dup_cnt; 4720 __le32 reserved[6]; 4721 } __packed; 4722 4723 /* 4724 * peer statistics. 4725 * TODO: add more stats 4726 */ 4727 struct wmi_peer_stats { 4728 struct wmi_mac_addr peer_macaddr; 4729 __le32 peer_rssi; 4730 __le32 peer_tx_rate; 4731 } __packed; 4732 4733 struct wmi_10x_peer_stats { 4734 struct wmi_peer_stats old; 4735 __le32 peer_rx_rate; 4736 } __packed; 4737 4738 struct wmi_10_2_peer_stats { 4739 struct wmi_peer_stats old; 4740 __le32 peer_rx_rate; 4741 __le32 current_per; 4742 __le32 retries; 4743 __le32 tx_rate_count; 4744 __le32 max_4ms_frame_len; 4745 __le32 total_sub_frames; 4746 __le32 tx_bytes; 4747 __le32 num_pkt_loss_overflow[4]; 4748 __le32 num_pkt_loss_excess_retry[4]; 4749 } __packed; 4750 4751 struct wmi_10_2_4_peer_stats { 4752 struct wmi_10_2_peer_stats common; 4753 __le32 peer_rssi_changed; 4754 } __packed; 4755 4756 struct wmi_10_2_4_ext_peer_stats { 4757 struct wmi_10_2_peer_stats common; 4758 __le32 peer_rssi_changed; 4759 __le32 rx_duration; 4760 } __packed; 4761 4762 struct wmi_10_4_peer_stats { 4763 struct wmi_mac_addr peer_macaddr; 4764 __le32 peer_rssi; 4765 __le32 peer_rssi_seq_num; 4766 __le32 peer_tx_rate; 4767 __le32 peer_rx_rate; 4768 __le32 current_per; 4769 __le32 retries; 4770 __le32 tx_rate_count; 4771 __le32 max_4ms_frame_len; 4772 __le32 total_sub_frames; 4773 __le32 tx_bytes; 4774 __le32 num_pkt_loss_overflow[4]; 4775 __le32 num_pkt_loss_excess_retry[4]; 4776 __le32 peer_rssi_changed; 4777 } __packed; 4778 4779 struct wmi_10_4_peer_extd_stats { 4780 struct wmi_mac_addr peer_macaddr; 4781 __le32 inactive_time; 4782 __le32 peer_chain_rssi; 4783 __le32 rx_duration; 4784 __le32 reserved[10]; 4785 } __packed; 4786 4787 struct wmi_10_4_bss_bcn_stats { 4788 __le32 vdev_id; 4789 __le32 bss_bcns_dropped; 4790 __le32 bss_bcn_delivered; 4791 } __packed; 4792 4793 struct wmi_10_4_bss_bcn_filter_stats { 4794 __le32 bcns_dropped; 4795 __le32 bcns_delivered; 4796 __le32 active_filters; 4797 struct wmi_10_4_bss_bcn_stats bss_stats; 4798 } __packed; 4799 4800 struct wmi_10_2_pdev_ext_stats { 4801 __le32 rx_rssi_comb; 4802 __le32 rx_rssi[4]; 4803 __le32 rx_mcs[10]; 4804 __le32 tx_mcs[10]; 4805 __le32 ack_rssi; 4806 } __packed; 4807 4808 struct wmi_vdev_create_cmd { 4809 __le32 vdev_id; 4810 __le32 vdev_type; 4811 __le32 vdev_subtype; 4812 struct wmi_mac_addr vdev_macaddr; 4813 } __packed; 4814 4815 enum wmi_vdev_type { 4816 WMI_VDEV_TYPE_AP = 1, 4817 WMI_VDEV_TYPE_STA = 2, 4818 WMI_VDEV_TYPE_IBSS = 3, 4819 WMI_VDEV_TYPE_MONITOR = 4, 4820 }; 4821 4822 enum wmi_vdev_subtype { 4823 WMI_VDEV_SUBTYPE_NONE, 4824 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4825 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4826 WMI_VDEV_SUBTYPE_P2P_GO, 4827 WMI_VDEV_SUBTYPE_PROXY_STA, 4828 WMI_VDEV_SUBTYPE_MESH_11S, 4829 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4830 }; 4831 4832 enum wmi_vdev_subtype_legacy { 4833 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4834 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4835 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4836 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4837 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4838 }; 4839 4840 enum wmi_vdev_subtype_10_2_4 { 4841 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4842 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4843 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4844 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4845 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4846 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4847 }; 4848 4849 enum wmi_vdev_subtype_10_4 { 4850 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4851 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4852 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4853 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4854 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4855 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4856 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4857 }; 4858 4859 /* values for vdev_subtype */ 4860 4861 /* values for vdev_start_request flags */ 4862 /* 4863 * Indicates that AP VDEV uses hidden ssid. only valid for 4864 * AP/GO 4865 */ 4866 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4867 /* 4868 * Indicates if robust management frame/management frame 4869 * protection is enabled. For GO/AP vdevs, it indicates that 4870 * it may support station/client associations with RMF enabled. 4871 * For STA/client vdevs, it indicates that sta will 4872 * associate with AP with RMF enabled. 4873 */ 4874 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4875 4876 struct wmi_p2p_noa_descriptor { 4877 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4878 __le32 duration; /* Absent period duration in micro seconds */ 4879 __le32 interval; /* Absent period interval in micro seconds */ 4880 __le32 start_time; /* 32 bit tsf time when in starts */ 4881 } __packed; 4882 4883 struct wmi_vdev_start_request_cmd { 4884 /* WMI channel */ 4885 struct wmi_channel chan; 4886 /* unique id identifying the VDEV, generated by the caller */ 4887 __le32 vdev_id; 4888 /* requestor id identifying the caller module */ 4889 __le32 requestor_id; 4890 /* beacon interval from received beacon */ 4891 __le32 beacon_interval; 4892 /* DTIM Period from the received beacon */ 4893 __le32 dtim_period; 4894 /* Flags */ 4895 __le32 flags; 4896 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4897 struct wmi_ssid ssid; 4898 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4899 __le32 bcn_tx_rate; 4900 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4901 __le32 bcn_tx_power; 4902 /* number of p2p NOA descriptor(s) from scan entry */ 4903 __le32 num_noa_descriptors; 4904 /* 4905 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4906 * During CAC, Our HW shouldn't ack ditected frames 4907 */ 4908 __le32 disable_hw_ack; 4909 /* actual p2p NOA descriptor from scan entry */ 4910 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4911 } __packed; 4912 4913 struct wmi_vdev_restart_request_cmd { 4914 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4915 } __packed; 4916 4917 struct wmi_vdev_start_request_arg { 4918 u32 vdev_id; 4919 struct wmi_channel_arg channel; 4920 u32 bcn_intval; 4921 u32 dtim_period; 4922 u8 *ssid; 4923 u32 ssid_len; 4924 u32 bcn_tx_rate; 4925 u32 bcn_tx_power; 4926 bool disable_hw_ack; 4927 bool hidden_ssid; 4928 bool pmf_enabled; 4929 }; 4930 4931 struct wmi_vdev_delete_cmd { 4932 /* unique id identifying the VDEV, generated by the caller */ 4933 __le32 vdev_id; 4934 } __packed; 4935 4936 struct wmi_vdev_up_cmd { 4937 __le32 vdev_id; 4938 __le32 vdev_assoc_id; 4939 struct wmi_mac_addr vdev_bssid; 4940 } __packed; 4941 4942 struct wmi_vdev_stop_cmd { 4943 __le32 vdev_id; 4944 } __packed; 4945 4946 struct wmi_vdev_down_cmd { 4947 __le32 vdev_id; 4948 } __packed; 4949 4950 struct wmi_vdev_standby_response_cmd { 4951 /* unique id identifying the VDEV, generated by the caller */ 4952 __le32 vdev_id; 4953 } __packed; 4954 4955 struct wmi_vdev_resume_response_cmd { 4956 /* unique id identifying the VDEV, generated by the caller */ 4957 __le32 vdev_id; 4958 } __packed; 4959 4960 struct wmi_vdev_set_param_cmd { 4961 __le32 vdev_id; 4962 __le32 param_id; 4963 __le32 param_value; 4964 } __packed; 4965 4966 #define WMI_MAX_KEY_INDEX 3 4967 #define WMI_MAX_KEY_LEN 32 4968 4969 #define WMI_KEY_PAIRWISE 0x00 4970 #define WMI_KEY_GROUP 0x01 4971 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4972 4973 struct wmi_key_seq_counter { 4974 __le32 key_seq_counter_l; 4975 __le32 key_seq_counter_h; 4976 } __packed; 4977 4978 enum wmi_cipher_suites { 4979 WMI_CIPHER_NONE, 4980 WMI_CIPHER_WEP, 4981 WMI_CIPHER_TKIP, 4982 WMI_CIPHER_AES_OCB, 4983 WMI_CIPHER_AES_CCM, 4984 WMI_CIPHER_WAPI, 4985 WMI_CIPHER_CKIP, 4986 WMI_CIPHER_AES_CMAC, 4987 WMI_CIPHER_AES_GCM, 4988 }; 4989 4990 enum wmi_tlv_cipher_suites { 4991 WMI_TLV_CIPHER_NONE, 4992 WMI_TLV_CIPHER_WEP, 4993 WMI_TLV_CIPHER_TKIP, 4994 WMI_TLV_CIPHER_AES_OCB, 4995 WMI_TLV_CIPHER_AES_CCM, 4996 WMI_TLV_CIPHER_WAPI, 4997 WMI_TLV_CIPHER_CKIP, 4998 WMI_TLV_CIPHER_AES_CMAC, 4999 WMI_TLV_CIPHER_ANY, 5000 WMI_TLV_CIPHER_AES_GCM, 5001 }; 5002 5003 struct wmi_vdev_install_key_cmd { 5004 __le32 vdev_id; 5005 struct wmi_mac_addr peer_macaddr; 5006 __le32 key_idx; 5007 __le32 key_flags; 5008 __le32 key_cipher; /* %WMI_CIPHER_ */ 5009 struct wmi_key_seq_counter key_rsc_counter; 5010 struct wmi_key_seq_counter key_global_rsc_counter; 5011 struct wmi_key_seq_counter key_tsc_counter; 5012 u8 wpi_key_rsc_counter[16]; 5013 u8 wpi_key_tsc_counter[16]; 5014 __le32 key_len; 5015 __le32 key_txmic_len; 5016 __le32 key_rxmic_len; 5017 5018 /* contains key followed by tx mic followed by rx mic */ 5019 u8 key_data[0]; 5020 } __packed; 5021 5022 struct wmi_vdev_install_key_arg { 5023 u32 vdev_id; 5024 const u8 *macaddr; 5025 u32 key_idx; 5026 u32 key_flags; 5027 u32 key_cipher; 5028 u32 key_len; 5029 u32 key_txmic_len; 5030 u32 key_rxmic_len; 5031 const void *key_data; 5032 }; 5033 5034 /* 5035 * vdev fixed rate format: 5036 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 5037 * - nss - b5:b4 - ss number (0 mean 1ss) 5038 * - rate_mcs - b3:b0 - as below 5039 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 5040 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 5041 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 5042 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 5043 * HT/VHT: MCS index 5044 */ 5045 5046 /* Preamble types to be used with VDEV fixed rate configuration */ 5047 enum wmi_rate_preamble { 5048 WMI_RATE_PREAMBLE_OFDM, 5049 WMI_RATE_PREAMBLE_CCK, 5050 WMI_RATE_PREAMBLE_HT, 5051 WMI_RATE_PREAMBLE_VHT, 5052 }; 5053 5054 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 5055 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 5056 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 5057 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 5058 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 5059 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 5060 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 5061 (((preamble) << 6) | ((nss) << 4) | (rate)) 5062 #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) 5063 #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) 5064 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1) 5065 5066 #define ATH10K_VHT_MCS_NUM 10 5067 #define ATH10K_BW_NUM 6 5068 #define ATH10K_NSS_NUM 4 5069 #define ATH10K_LEGACY_NUM 12 5070 #define ATH10K_GI_NUM 2 5071 #define ATH10K_HT_MCS_NUM 32 5072 #define ATH10K_RATE_TABLE_NUM 320 5073 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2 5074 5075 /* Value to disable fixed rate setting */ 5076 #define WMI_FIXED_RATE_NONE (0xff) 5077 5078 struct wmi_peer_param_map { 5079 u32 smps_state; 5080 u32 ampdu; 5081 u32 authorize; 5082 u32 chan_width; 5083 u32 nss; 5084 u32 use_4addr; 5085 u32 membership; 5086 u32 use_fixed_power; 5087 u32 user_pos; 5088 u32 crit_proto_hint_enabled; 5089 u32 tx_fail_cnt_thr; 5090 u32 set_hw_retry_cts2s; 5091 u32 ibss_atim_win_len; 5092 u32 debug; 5093 u32 phymode; 5094 u32 dummy_var; 5095 }; 5096 5097 struct wmi_vdev_param_map { 5098 u32 rts_threshold; 5099 u32 fragmentation_threshold; 5100 u32 beacon_interval; 5101 u32 listen_interval; 5102 u32 multicast_rate; 5103 u32 mgmt_tx_rate; 5104 u32 slot_time; 5105 u32 preamble; 5106 u32 swba_time; 5107 u32 wmi_vdev_stats_update_period; 5108 u32 wmi_vdev_pwrsave_ageout_time; 5109 u32 wmi_vdev_host_swba_interval; 5110 u32 dtim_period; 5111 u32 wmi_vdev_oc_scheduler_air_time_limit; 5112 u32 wds; 5113 u32 atim_window; 5114 u32 bmiss_count_max; 5115 u32 bmiss_first_bcnt; 5116 u32 bmiss_final_bcnt; 5117 u32 feature_wmm; 5118 u32 chwidth; 5119 u32 chextoffset; 5120 u32 disable_htprotection; 5121 u32 sta_quickkickout; 5122 u32 mgmt_rate; 5123 u32 protection_mode; 5124 u32 fixed_rate; 5125 u32 sgi; 5126 u32 ldpc; 5127 u32 tx_stbc; 5128 u32 rx_stbc; 5129 u32 intra_bss_fwd; 5130 u32 def_keyid; 5131 u32 nss; 5132 u32 bcast_data_rate; 5133 u32 mcast_data_rate; 5134 u32 mcast_indicate; 5135 u32 dhcp_indicate; 5136 u32 unknown_dest_indicate; 5137 u32 ap_keepalive_min_idle_inactive_time_secs; 5138 u32 ap_keepalive_max_idle_inactive_time_secs; 5139 u32 ap_keepalive_max_unresponsive_time_secs; 5140 u32 ap_enable_nawds; 5141 u32 mcast2ucast_set; 5142 u32 enable_rtscts; 5143 u32 txbf; 5144 u32 packet_powersave; 5145 u32 drop_unencry; 5146 u32 tx_encap_type; 5147 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 5148 u32 rc_num_retries; 5149 u32 cabq_maxdur; 5150 u32 mfptest_set; 5151 u32 rts_fixed_rate; 5152 u32 vht_sgimask; 5153 u32 vht80_ratemask; 5154 u32 early_rx_adjust_enable; 5155 u32 early_rx_tgt_bmiss_num; 5156 u32 early_rx_bmiss_sample_cycle; 5157 u32 early_rx_slop_step; 5158 u32 early_rx_init_slop; 5159 u32 early_rx_adjust_pause; 5160 u32 proxy_sta; 5161 u32 meru_vc; 5162 u32 rx_decap_type; 5163 u32 bw_nss_ratemask; 5164 u32 inc_tsf; 5165 u32 dec_tsf; 5166 u32 disable_4addr_src_lrn; 5167 u32 rtt_responder_role; 5168 }; 5169 5170 #define WMI_VDEV_PARAM_UNSUPPORTED 0 5171 5172 /* the definition of different VDEV parameters */ 5173 enum wmi_vdev_param { 5174 /* RTS Threshold */ 5175 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5176 /* Fragmentation threshold */ 5177 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5178 /* beacon interval in TUs */ 5179 WMI_VDEV_PARAM_BEACON_INTERVAL, 5180 /* Listen interval in TUs */ 5181 WMI_VDEV_PARAM_LISTEN_INTERVAL, 5182 /* multicast rate in Mbps */ 5183 WMI_VDEV_PARAM_MULTICAST_RATE, 5184 /* management frame rate in Mbps */ 5185 WMI_VDEV_PARAM_MGMT_TX_RATE, 5186 /* slot time (long vs short) */ 5187 WMI_VDEV_PARAM_SLOT_TIME, 5188 /* preamble (long vs short) */ 5189 WMI_VDEV_PARAM_PREAMBLE, 5190 /* SWBA time (time before tbtt in msec) */ 5191 WMI_VDEV_PARAM_SWBA_TIME, 5192 /* time period for updating VDEV stats */ 5193 WMI_VDEV_STATS_UPDATE_PERIOD, 5194 /* age out time in msec for frames queued for station in power save */ 5195 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 5196 /* 5197 * Host SWBA interval (time in msec before tbtt for SWBA event 5198 * generation). 5199 */ 5200 WMI_VDEV_HOST_SWBA_INTERVAL, 5201 /* DTIM period (specified in units of num beacon intervals) */ 5202 WMI_VDEV_PARAM_DTIM_PERIOD, 5203 /* 5204 * scheduler air time limit for this VDEV. used by off chan 5205 * scheduler. 5206 */ 5207 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5208 /* enable/dsiable WDS for this VDEV */ 5209 WMI_VDEV_PARAM_WDS, 5210 /* ATIM Window */ 5211 WMI_VDEV_PARAM_ATIM_WINDOW, 5212 /* BMISS max */ 5213 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 5214 /* BMISS first time */ 5215 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 5216 /* BMISS final time */ 5217 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 5218 /* WMM enables/disabled */ 5219 WMI_VDEV_PARAM_FEATURE_WMM, 5220 /* Channel width */ 5221 WMI_VDEV_PARAM_CHWIDTH, 5222 /* Channel Offset */ 5223 WMI_VDEV_PARAM_CHEXTOFFSET, 5224 /* Disable HT Protection */ 5225 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 5226 /* Quick STA Kickout */ 5227 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 5228 /* Rate to be used with Management frames */ 5229 WMI_VDEV_PARAM_MGMT_RATE, 5230 /* Protection Mode */ 5231 WMI_VDEV_PARAM_PROTECTION_MODE, 5232 /* Fixed rate setting */ 5233 WMI_VDEV_PARAM_FIXED_RATE, 5234 /* Short GI Enable/Disable */ 5235 WMI_VDEV_PARAM_SGI, 5236 /* Enable LDPC */ 5237 WMI_VDEV_PARAM_LDPC, 5238 /* Enable Tx STBC */ 5239 WMI_VDEV_PARAM_TX_STBC, 5240 /* Enable Rx STBC */ 5241 WMI_VDEV_PARAM_RX_STBC, 5242 /* Intra BSS forwarding */ 5243 WMI_VDEV_PARAM_INTRA_BSS_FWD, 5244 /* Setting Default xmit key for Vdev */ 5245 WMI_VDEV_PARAM_DEF_KEYID, 5246 /* NSS width */ 5247 WMI_VDEV_PARAM_NSS, 5248 /* Set the custom rate for the broadcast data frames */ 5249 WMI_VDEV_PARAM_BCAST_DATA_RATE, 5250 /* Set the custom rate (rate-code) for multicast data frames */ 5251 WMI_VDEV_PARAM_MCAST_DATA_RATE, 5252 /* Tx multicast packet indicate Enable/Disable */ 5253 WMI_VDEV_PARAM_MCAST_INDICATE, 5254 /* Tx DHCP packet indicate Enable/Disable */ 5255 WMI_VDEV_PARAM_DHCP_INDICATE, 5256 /* Enable host inspection of Tx unicast packet to unknown destination */ 5257 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5258 5259 /* The minimum amount of time AP begins to consider STA inactive */ 5260 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5261 5262 /* 5263 * An associated STA is considered inactive when there is no recent 5264 * TX/RX activity and no downlink frames are buffered for it. Once a 5265 * STA exceeds the maximum idle inactive time, the AP will send an 5266 * 802.11 data-null as a keep alive to verify the STA is still 5267 * associated. If the STA does ACK the data-null, or if the data-null 5268 * is buffered and the STA does not retrieve it, the STA will be 5269 * considered unresponsive 5270 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5271 */ 5272 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5273 5274 /* 5275 * An associated STA is considered unresponsive if there is no recent 5276 * TX/RX activity and downlink frames are buffered for it. Once a STA 5277 * exceeds the maximum unresponsive time, the AP will send a 5278 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5279 */ 5280 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5281 5282 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5283 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5284 /* Enable/Disable RTS-CTS */ 5285 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5286 /* Enable TXBFee/er */ 5287 WMI_VDEV_PARAM_TXBF, 5288 5289 /* Set packet power save */ 5290 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5291 5292 /* 5293 * Drops un-encrypted packets if eceived in an encrypted connection 5294 * otherwise forwards to host. 5295 */ 5296 WMI_VDEV_PARAM_DROP_UNENCRY, 5297 5298 /* 5299 * Set the encapsulation type for frames. 5300 */ 5301 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5302 }; 5303 5304 /* the definition of different VDEV parameters */ 5305 enum wmi_10x_vdev_param { 5306 /* RTS Threshold */ 5307 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5308 /* Fragmentation threshold */ 5309 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5310 /* beacon interval in TUs */ 5311 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5312 /* Listen interval in TUs */ 5313 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5314 /* multicast rate in Mbps */ 5315 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5316 /* management frame rate in Mbps */ 5317 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5318 /* slot time (long vs short) */ 5319 WMI_10X_VDEV_PARAM_SLOT_TIME, 5320 /* preamble (long vs short) */ 5321 WMI_10X_VDEV_PARAM_PREAMBLE, 5322 /* SWBA time (time before tbtt in msec) */ 5323 WMI_10X_VDEV_PARAM_SWBA_TIME, 5324 /* time period for updating VDEV stats */ 5325 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5326 /* age out time in msec for frames queued for station in power save */ 5327 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5328 /* 5329 * Host SWBA interval (time in msec before tbtt for SWBA event 5330 * generation). 5331 */ 5332 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5333 /* DTIM period (specified in units of num beacon intervals) */ 5334 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5335 /* 5336 * scheduler air time limit for this VDEV. used by off chan 5337 * scheduler. 5338 */ 5339 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5340 /* enable/dsiable WDS for this VDEV */ 5341 WMI_10X_VDEV_PARAM_WDS, 5342 /* ATIM Window */ 5343 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5344 /* BMISS max */ 5345 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5346 /* WMM enables/disabled */ 5347 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5348 /* Channel width */ 5349 WMI_10X_VDEV_PARAM_CHWIDTH, 5350 /* Channel Offset */ 5351 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5352 /* Disable HT Protection */ 5353 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5354 /* Quick STA Kickout */ 5355 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5356 /* Rate to be used with Management frames */ 5357 WMI_10X_VDEV_PARAM_MGMT_RATE, 5358 /* Protection Mode */ 5359 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5360 /* Fixed rate setting */ 5361 WMI_10X_VDEV_PARAM_FIXED_RATE, 5362 /* Short GI Enable/Disable */ 5363 WMI_10X_VDEV_PARAM_SGI, 5364 /* Enable LDPC */ 5365 WMI_10X_VDEV_PARAM_LDPC, 5366 /* Enable Tx STBC */ 5367 WMI_10X_VDEV_PARAM_TX_STBC, 5368 /* Enable Rx STBC */ 5369 WMI_10X_VDEV_PARAM_RX_STBC, 5370 /* Intra BSS forwarding */ 5371 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5372 /* Setting Default xmit key for Vdev */ 5373 WMI_10X_VDEV_PARAM_DEF_KEYID, 5374 /* NSS width */ 5375 WMI_10X_VDEV_PARAM_NSS, 5376 /* Set the custom rate for the broadcast data frames */ 5377 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5378 /* Set the custom rate (rate-code) for multicast data frames */ 5379 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5380 /* Tx multicast packet indicate Enable/Disable */ 5381 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5382 /* Tx DHCP packet indicate Enable/Disable */ 5383 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5384 /* Enable host inspection of Tx unicast packet to unknown destination */ 5385 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5386 5387 /* The minimum amount of time AP begins to consider STA inactive */ 5388 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5389 5390 /* 5391 * An associated STA is considered inactive when there is no recent 5392 * TX/RX activity and no downlink frames are buffered for it. Once a 5393 * STA exceeds the maximum idle inactive time, the AP will send an 5394 * 802.11 data-null as a keep alive to verify the STA is still 5395 * associated. If the STA does ACK the data-null, or if the data-null 5396 * is buffered and the STA does not retrieve it, the STA will be 5397 * considered unresponsive 5398 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5399 */ 5400 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5401 5402 /* 5403 * An associated STA is considered unresponsive if there is no recent 5404 * TX/RX activity and downlink frames are buffered for it. Once a STA 5405 * exceeds the maximum unresponsive time, the AP will send a 5406 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5407 */ 5408 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5409 5410 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5411 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5412 5413 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5414 /* Enable/Disable RTS-CTS */ 5415 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5416 5417 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5418 5419 /* following are available as of firmware 10.2 */ 5420 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5421 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5422 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5423 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5424 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5425 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5426 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5427 }; 5428 5429 enum wmi_10_4_vdev_param { 5430 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5431 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5432 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5433 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5434 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5435 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5436 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5437 WMI_10_4_VDEV_PARAM_PREAMBLE, 5438 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5439 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5440 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5441 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5442 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5443 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5444 WMI_10_4_VDEV_PARAM_WDS, 5445 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5446 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5447 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5448 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5449 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5450 WMI_10_4_VDEV_PARAM_CHWIDTH, 5451 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5452 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5453 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5454 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5455 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5456 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5457 WMI_10_4_VDEV_PARAM_SGI, 5458 WMI_10_4_VDEV_PARAM_LDPC, 5459 WMI_10_4_VDEV_PARAM_TX_STBC, 5460 WMI_10_4_VDEV_PARAM_RX_STBC, 5461 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5462 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5463 WMI_10_4_VDEV_PARAM_NSS, 5464 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5465 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5466 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5467 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5468 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5469 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5470 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5471 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5472 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5473 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5474 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5475 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5476 WMI_10_4_VDEV_PARAM_TXBF, 5477 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5478 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5479 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5480 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5481 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5482 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5483 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5484 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5485 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5486 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5487 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5488 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5489 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5490 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5491 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5492 WMI_10_4_VDEV_PARAM_PROXY_STA, 5493 WMI_10_4_VDEV_PARAM_MERU_VC, 5494 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5495 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5496 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5497 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5498 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5499 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5500 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5501 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5502 WMI_10_4_VDEV_PARAM_RX_FILTER, 5503 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5504 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5505 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5506 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5507 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE, 5508 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC, 5509 WMI_10_4_VDEV_PARAM_NSS_VHT160, 5510 WMI_10_4_VDEV_PARAM_NSS_VHT80_80, 5511 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC, 5512 WMI_10_4_VDEV_PARAM_DISABLE_CABQ, 5513 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE, 5514 WMI_10_4_VDEV_PARAM_TX_POWER, 5515 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE, 5516 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN, 5517 }; 5518 5519 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1 5520 5521 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5522 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5523 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5524 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5525 5526 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5527 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5528 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5529 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5530 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5531 5532 /* slot time long */ 5533 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5534 /* slot time short */ 5535 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5536 /* preablbe long */ 5537 #define WMI_VDEV_PREAMBLE_LONG 0x1 5538 /* preablbe short */ 5539 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5540 5541 enum wmi_start_event_param { 5542 WMI_VDEV_RESP_START_EVENT = 0, 5543 WMI_VDEV_RESP_RESTART_EVENT, 5544 }; 5545 5546 struct wmi_vdev_start_response_event { 5547 __le32 vdev_id; 5548 __le32 req_id; 5549 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5550 __le32 status; 5551 } __packed; 5552 5553 struct wmi_vdev_standby_req_event { 5554 /* unique id identifying the VDEV, generated by the caller */ 5555 __le32 vdev_id; 5556 } __packed; 5557 5558 struct wmi_vdev_resume_req_event { 5559 /* unique id identifying the VDEV, generated by the caller */ 5560 __le32 vdev_id; 5561 } __packed; 5562 5563 struct wmi_vdev_stopped_event { 5564 /* unique id identifying the VDEV, generated by the caller */ 5565 __le32 vdev_id; 5566 } __packed; 5567 5568 /* 5569 * common structure used for simple events 5570 * (stopped, resume_req, standby response) 5571 */ 5572 struct wmi_vdev_simple_event { 5573 /* unique id identifying the VDEV, generated by the caller */ 5574 __le32 vdev_id; 5575 } __packed; 5576 5577 /* VDEV start response status codes */ 5578 /* VDEV successfully started */ 5579 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5580 5581 /* requested VDEV not found */ 5582 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5583 5584 /* unsupported VDEV combination */ 5585 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5586 5587 /* TODO: please add more comments if you have in-depth information */ 5588 struct wmi_vdev_spectral_conf_cmd { 5589 __le32 vdev_id; 5590 5591 /* number of fft samples to send (0 for infinite) */ 5592 __le32 scan_count; 5593 __le32 scan_period; 5594 __le32 scan_priority; 5595 5596 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5597 __le32 scan_fft_size; 5598 __le32 scan_gc_ena; 5599 __le32 scan_restart_ena; 5600 __le32 scan_noise_floor_ref; 5601 __le32 scan_init_delay; 5602 __le32 scan_nb_tone_thr; 5603 __le32 scan_str_bin_thr; 5604 __le32 scan_wb_rpt_mode; 5605 __le32 scan_rssi_rpt_mode; 5606 __le32 scan_rssi_thr; 5607 __le32 scan_pwr_format; 5608 5609 /* rpt_mode: Format of FFT report to software for spectral scan 5610 * triggered FFTs: 5611 * 0: No FFT report (only spectral scan summary report) 5612 * 1: 2-dword summary of metrics for each completed FFT + spectral 5613 * scan summary report 5614 * 2: 2-dword summary of metrics for each completed FFT + 5615 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5616 * report 5617 * 3: 2-dword summary of metrics for each completed FFT + 5618 * 2x- oversampled bins (all) per FFT + spectral scan summary 5619 */ 5620 __le32 scan_rpt_mode; 5621 __le32 scan_bin_scale; 5622 __le32 scan_dbm_adj; 5623 __le32 scan_chn_mask; 5624 } __packed; 5625 5626 struct wmi_vdev_spectral_conf_arg { 5627 u32 vdev_id; 5628 u32 scan_count; 5629 u32 scan_period; 5630 u32 scan_priority; 5631 u32 scan_fft_size; 5632 u32 scan_gc_ena; 5633 u32 scan_restart_ena; 5634 u32 scan_noise_floor_ref; 5635 u32 scan_init_delay; 5636 u32 scan_nb_tone_thr; 5637 u32 scan_str_bin_thr; 5638 u32 scan_wb_rpt_mode; 5639 u32 scan_rssi_rpt_mode; 5640 u32 scan_rssi_thr; 5641 u32 scan_pwr_format; 5642 u32 scan_rpt_mode; 5643 u32 scan_bin_scale; 5644 u32 scan_dbm_adj; 5645 u32 scan_chn_mask; 5646 }; 5647 5648 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5649 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5650 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5651 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5652 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5653 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5654 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5655 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5656 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5657 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5658 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5659 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5660 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5661 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5662 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5663 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5664 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5665 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5666 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5667 5668 struct wmi_vdev_spectral_enable_cmd { 5669 __le32 vdev_id; 5670 __le32 trigger_cmd; 5671 __le32 enable_cmd; 5672 } __packed; 5673 5674 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5675 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5676 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5677 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5678 5679 /* Beacon processing related command and event structures */ 5680 struct wmi_bcn_tx_hdr { 5681 __le32 vdev_id; 5682 __le32 tx_rate; 5683 __le32 tx_power; 5684 __le32 bcn_len; 5685 } __packed; 5686 5687 struct wmi_bcn_tx_cmd { 5688 struct wmi_bcn_tx_hdr hdr; 5689 u8 *bcn[0]; 5690 } __packed; 5691 5692 struct wmi_bcn_tx_arg { 5693 u32 vdev_id; 5694 u32 tx_rate; 5695 u32 tx_power; 5696 u32 bcn_len; 5697 const void *bcn; 5698 }; 5699 5700 enum wmi_bcn_tx_ref_flags { 5701 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5702 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5703 }; 5704 5705 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5706 * chainmask yields no beacons on the air at all. 5707 */ 5708 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5709 5710 struct wmi_bcn_tx_ref_cmd { 5711 __le32 vdev_id; 5712 __le32 data_len; 5713 /* physical address of the frame - dma pointer */ 5714 __le32 data_ptr; 5715 /* id for host to track */ 5716 __le32 msdu_id; 5717 /* frame ctrl to setup PPDU desc */ 5718 __le32 frame_control; 5719 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5720 __le32 flags; 5721 /* introduced in 10.2 */ 5722 __le32 antenna_mask; 5723 } __packed; 5724 5725 /* Beacon filter */ 5726 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5727 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5728 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5729 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5730 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5731 5732 struct wmi_bcn_filter_rx_cmd { 5733 /* Filter ID */ 5734 __le32 bcn_filter_id; 5735 /* Filter type - wmi_bcn_filter */ 5736 __le32 bcn_filter; 5737 /* Buffer len */ 5738 __le32 bcn_filter_len; 5739 /* Filter info (threshold, BSSID, RSSI) */ 5740 u8 *bcn_filter_buf; 5741 } __packed; 5742 5743 /* Capabilities and IEs to be passed to firmware */ 5744 struct wmi_bcn_prb_info { 5745 /* Capabilities */ 5746 __le32 caps; 5747 /* ERP info */ 5748 __le32 erp; 5749 /* Advanced capabilities */ 5750 /* HT capabilities */ 5751 /* HT Info */ 5752 /* ibss_dfs */ 5753 /* wpa Info */ 5754 /* rsn Info */ 5755 /* rrm info */ 5756 /* ath_ext */ 5757 /* app IE */ 5758 } __packed; 5759 5760 struct wmi_bcn_tmpl_cmd { 5761 /* unique id identifying the VDEV, generated by the caller */ 5762 __le32 vdev_id; 5763 /* TIM IE offset from the beginning of the template. */ 5764 __le32 tim_ie_offset; 5765 /* beacon probe capabilities and IEs */ 5766 struct wmi_bcn_prb_info bcn_prb_info; 5767 /* beacon buffer length */ 5768 __le32 buf_len; 5769 /* variable length data */ 5770 u8 data[1]; 5771 } __packed; 5772 5773 struct wmi_prb_tmpl_cmd { 5774 /* unique id identifying the VDEV, generated by the caller */ 5775 __le32 vdev_id; 5776 /* beacon probe capabilities and IEs */ 5777 struct wmi_bcn_prb_info bcn_prb_info; 5778 /* beacon buffer length */ 5779 __le32 buf_len; 5780 /* Variable length data */ 5781 u8 data[1]; 5782 } __packed; 5783 5784 enum wmi_sta_ps_mode { 5785 /* enable power save for the given STA VDEV */ 5786 WMI_STA_PS_MODE_DISABLED = 0, 5787 /* disable power save for a given STA VDEV */ 5788 WMI_STA_PS_MODE_ENABLED = 1, 5789 }; 5790 5791 struct wmi_sta_powersave_mode_cmd { 5792 /* unique id identifying the VDEV, generated by the caller */ 5793 __le32 vdev_id; 5794 5795 /* 5796 * Power save mode 5797 * (see enum wmi_sta_ps_mode) 5798 */ 5799 __le32 sta_ps_mode; 5800 } __packed; 5801 5802 enum wmi_csa_offload_en { 5803 WMI_CSA_OFFLOAD_DISABLE = 0, 5804 WMI_CSA_OFFLOAD_ENABLE = 1, 5805 }; 5806 5807 struct wmi_csa_offload_enable_cmd { 5808 __le32 vdev_id; 5809 __le32 csa_offload_enable; 5810 } __packed; 5811 5812 struct wmi_csa_offload_chanswitch_cmd { 5813 __le32 vdev_id; 5814 struct wmi_channel chan; 5815 } __packed; 5816 5817 /* 5818 * This parameter controls the policy for retrieving frames from AP while the 5819 * STA is in sleep state. 5820 * 5821 * Only takes affect if the sta_ps_mode is enabled 5822 */ 5823 enum wmi_sta_ps_param_rx_wake_policy { 5824 /* 5825 * Wake up when ever there is an RX activity on the VDEV. In this mode 5826 * the Power save SM(state machine) will come out of sleep by either 5827 * sending null frame (or) a data frame (with PS==0) in response to TIM 5828 * bit set in the received beacon frame from AP. 5829 */ 5830 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5831 5832 /* 5833 * Here the power save state machine will not wakeup in response to TIM 5834 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5835 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5836 * access categories are delivery-enabled, the station will send a 5837 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5838 */ 5839 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5840 }; 5841 5842 /* 5843 * Number of tx frames/beacon that cause the power save SM to wake up. 5844 * 5845 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5846 * meaning, It will cause the SM to never wake up. This is useful if you want 5847 * to keep the system to sleep all the time for some kind of test mode . host 5848 * can change this parameter any time. It will affect at the next tx frame. 5849 */ 5850 enum wmi_sta_ps_param_tx_wake_threshold { 5851 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5852 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5853 5854 /* 5855 * Values greater than one indicate that many TX attempts per beacon 5856 * interval before the STA will wake up 5857 */ 5858 }; 5859 5860 /* 5861 * The maximum number of PS-Poll frames the FW will send in response to 5862 * traffic advertised in TIM before waking up (by sending a null frame with PS 5863 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5864 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5865 * parameter is used when the RX wake policy is 5866 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5867 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5868 */ 5869 enum wmi_sta_ps_param_pspoll_count { 5870 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5871 /* 5872 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5873 * FW will send before waking up. 5874 */ 5875 5876 /* When u-APSD is enabled the firmware will be very reluctant to exit 5877 * STA PS. This could result in very poor Rx performance with STA doing 5878 * PS-Poll for each and every buffered frame. This value is a bit 5879 * arbitrary. 5880 */ 5881 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5882 }; 5883 5884 /* 5885 * This will include the delivery and trigger enabled state for every AC. 5886 * This is the negotiated state with AP. The host MLME needs to set this based 5887 * on AP capability and the state Set in the association request by the 5888 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5889 */ 5890 #define WMI_UAPSD_AC_TYPE_DELI 0 5891 #define WMI_UAPSD_AC_TYPE_TRIG 1 5892 5893 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5894 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5895 5896 enum wmi_sta_ps_param_uapsd { 5897 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5898 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5899 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5900 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5901 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5902 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5903 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5904 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5905 }; 5906 5907 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5908 5909 struct wmi_sta_uapsd_auto_trig_param { 5910 __le32 wmm_ac; 5911 __le32 user_priority; 5912 __le32 service_interval; 5913 __le32 suspend_interval; 5914 __le32 delay_interval; 5915 }; 5916 5917 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5918 __le32 vdev_id; 5919 struct wmi_mac_addr peer_macaddr; 5920 __le32 num_ac; 5921 }; 5922 5923 struct wmi_sta_uapsd_auto_trig_arg { 5924 u32 wmm_ac; 5925 u32 user_priority; 5926 u32 service_interval; 5927 u32 suspend_interval; 5928 u32 delay_interval; 5929 }; 5930 5931 enum wmi_sta_powersave_param { 5932 /* 5933 * Controls how frames are retrievd from AP while STA is sleeping 5934 * 5935 * (see enum wmi_sta_ps_param_rx_wake_policy) 5936 */ 5937 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5938 5939 /* 5940 * The STA will go active after this many TX 5941 * 5942 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5943 */ 5944 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5945 5946 /* 5947 * Number of PS-Poll to send before STA wakes up 5948 * 5949 * (see enum wmi_sta_ps_param_pspoll_count) 5950 * 5951 */ 5952 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5953 5954 /* 5955 * TX/RX inactivity time in msec before going to sleep. 5956 * 5957 * The power save SM will monitor tx/rx activity on the VDEV, if no 5958 * activity for the specified msec of the parameter the Power save 5959 * SM will go to sleep. 5960 */ 5961 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5962 5963 /* 5964 * Set uapsd configuration. 5965 * 5966 * (see enum wmi_sta_ps_param_uapsd) 5967 */ 5968 WMI_STA_PS_PARAM_UAPSD = 4, 5969 }; 5970 5971 struct wmi_sta_powersave_param_cmd { 5972 __le32 vdev_id; 5973 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5974 __le32 param_value; 5975 } __packed; 5976 5977 /* No MIMO power save */ 5978 #define WMI_STA_MIMO_PS_MODE_DISABLE 5979 /* mimo powersave mode static*/ 5980 #define WMI_STA_MIMO_PS_MODE_STATIC 5981 /* mimo powersave mode dynamic */ 5982 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5983 5984 struct wmi_sta_mimo_ps_mode_cmd { 5985 /* unique id identifying the VDEV, generated by the caller */ 5986 __le32 vdev_id; 5987 /* mimo powersave mode as defined above */ 5988 __le32 mimo_pwrsave_mode; 5989 } __packed; 5990 5991 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5992 enum wmi_ap_ps_param_uapsd { 5993 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5994 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5995 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5996 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5997 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5998 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5999 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 6000 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 6001 }; 6002 6003 /* U-APSD maximum service period of peer station */ 6004 enum wmi_ap_ps_peer_param_max_sp { 6005 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 6006 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 6007 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 6008 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 6009 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 6010 }; 6011 6012 /* 6013 * AP power save parameter 6014 * Set a power save specific parameter for a peer station 6015 */ 6016 enum wmi_ap_ps_peer_param { 6017 /* Set uapsd configuration for a given peer. 6018 * 6019 * Include the delivery and trigger enabled state for every AC. 6020 * The host MLME needs to set this based on AP capability and stations 6021 * request Set in the association request received from the station. 6022 * 6023 * Lower 8 bits of the value specify the UAPSD configuration. 6024 * 6025 * (see enum wmi_ap_ps_param_uapsd) 6026 * The default value is 0. 6027 */ 6028 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 6029 6030 /* 6031 * Set the service period for a UAPSD capable station 6032 * 6033 * The service period from wme ie in the (re)assoc request frame. 6034 * 6035 * (see enum wmi_ap_ps_peer_param_max_sp) 6036 */ 6037 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 6038 6039 /* Time in seconds for aging out buffered frames for STA in PS */ 6040 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 6041 }; 6042 6043 struct wmi_ap_ps_peer_cmd { 6044 /* unique id identifying the VDEV, generated by the caller */ 6045 __le32 vdev_id; 6046 6047 /* peer MAC address */ 6048 struct wmi_mac_addr peer_macaddr; 6049 6050 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 6051 __le32 param_id; 6052 6053 /* AP powersave param value */ 6054 __le32 param_value; 6055 } __packed; 6056 6057 /* 128 clients = 4 words */ 6058 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 6059 6060 struct wmi_tim_info { 6061 __le32 tim_len; 6062 __le32 tim_mcast; 6063 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 6064 __le32 tim_changed; 6065 __le32 tim_num_ps_pending; 6066 } __packed; 6067 6068 struct wmi_tim_info_arg { 6069 __le32 tim_len; 6070 __le32 tim_mcast; 6071 const __le32 *tim_bitmap; 6072 __le32 tim_changed; 6073 __le32 tim_num_ps_pending; 6074 } __packed; 6075 6076 /* Maximum number of NOA Descriptors supported */ 6077 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 6078 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 6079 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 6080 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 6081 6082 struct wmi_p2p_noa_info { 6083 /* Bit 0 - Flag to indicate an update in NOA schedule 6084 * Bits 7-1 - Reserved 6085 */ 6086 u8 changed; 6087 /* NOA index */ 6088 u8 index; 6089 /* Bit 0 - Opp PS state of the AP 6090 * Bits 1-7 - Ctwindow in TUs 6091 */ 6092 u8 ctwindow_oppps; 6093 /* Number of NOA descriptors */ 6094 u8 num_descriptors; 6095 6096 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 6097 } __packed; 6098 6099 struct wmi_bcn_info { 6100 struct wmi_tim_info tim_info; 6101 struct wmi_p2p_noa_info p2p_noa_info; 6102 } __packed; 6103 6104 struct wmi_host_swba_event { 6105 __le32 vdev_map; 6106 struct wmi_bcn_info bcn_info[0]; 6107 } __packed; 6108 6109 struct wmi_10_2_4_bcn_info { 6110 struct wmi_tim_info tim_info; 6111 /* The 10.2.4 FW doesn't have p2p NOA info */ 6112 } __packed; 6113 6114 struct wmi_10_2_4_host_swba_event { 6115 __le32 vdev_map; 6116 struct wmi_10_2_4_bcn_info bcn_info[0]; 6117 } __packed; 6118 6119 /* 16 words = 512 client + 1 word = for guard */ 6120 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 6121 6122 struct wmi_10_4_tim_info { 6123 __le32 tim_len; 6124 __le32 tim_mcast; 6125 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 6126 __le32 tim_changed; 6127 __le32 tim_num_ps_pending; 6128 } __packed; 6129 6130 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 6131 6132 struct wmi_10_4_p2p_noa_info { 6133 /* Bit 0 - Flag to indicate an update in NOA schedule 6134 * Bits 7-1 - Reserved 6135 */ 6136 u8 changed; 6137 /* NOA index */ 6138 u8 index; 6139 /* Bit 0 - Opp PS state of the AP 6140 * Bits 1-7 - Ctwindow in TUs 6141 */ 6142 u8 ctwindow_oppps; 6143 /* Number of NOA descriptors */ 6144 u8 num_descriptors; 6145 6146 struct wmi_p2p_noa_descriptor 6147 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 6148 } __packed; 6149 6150 struct wmi_10_4_bcn_info { 6151 struct wmi_10_4_tim_info tim_info; 6152 struct wmi_10_4_p2p_noa_info p2p_noa_info; 6153 } __packed; 6154 6155 struct wmi_10_4_host_swba_event { 6156 __le32 vdev_map; 6157 struct wmi_10_4_bcn_info bcn_info[0]; 6158 } __packed; 6159 6160 #define WMI_MAX_AP_VDEV 16 6161 6162 struct wmi_tbtt_offset_event { 6163 __le32 vdev_map; 6164 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 6165 } __packed; 6166 6167 struct wmi_peer_create_cmd { 6168 __le32 vdev_id; 6169 struct wmi_mac_addr peer_macaddr; 6170 __le32 peer_type; 6171 } __packed; 6172 6173 enum wmi_peer_type { 6174 WMI_PEER_TYPE_DEFAULT = 0, 6175 WMI_PEER_TYPE_BSS = 1, 6176 WMI_PEER_TYPE_TDLS = 2, 6177 }; 6178 6179 struct wmi_peer_delete_cmd { 6180 __le32 vdev_id; 6181 struct wmi_mac_addr peer_macaddr; 6182 } __packed; 6183 6184 struct wmi_peer_flush_tids_cmd { 6185 __le32 vdev_id; 6186 struct wmi_mac_addr peer_macaddr; 6187 __le32 peer_tid_bitmap; 6188 } __packed; 6189 6190 struct wmi_fixed_rate { 6191 /* 6192 * rate mode . 0: disable fixed rate (auto rate) 6193 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 6194 * 2: ht20 11n rate specified as mcs index 6195 * 3: ht40 11n rate specified as mcs index 6196 */ 6197 __le32 rate_mode; 6198 /* 6199 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 6200 * and series 3 is stored at byte 3 (MSB) 6201 */ 6202 __le32 rate_series; 6203 /* 6204 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 6205 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 6206 * (MSB) 6207 */ 6208 __le32 rate_retries; 6209 } __packed; 6210 6211 struct wmi_peer_fixed_rate_cmd { 6212 /* unique id identifying the VDEV, generated by the caller */ 6213 __le32 vdev_id; 6214 /* peer MAC address */ 6215 struct wmi_mac_addr peer_macaddr; 6216 /* fixed rate */ 6217 struct wmi_fixed_rate peer_fixed_rate; 6218 } __packed; 6219 6220 #define WMI_MGMT_TID 17 6221 6222 struct wmi_addba_clear_resp_cmd { 6223 /* unique id identifying the VDEV, generated by the caller */ 6224 __le32 vdev_id; 6225 /* peer MAC address */ 6226 struct wmi_mac_addr peer_macaddr; 6227 } __packed; 6228 6229 struct wmi_addba_send_cmd { 6230 /* unique id identifying the VDEV, generated by the caller */ 6231 __le32 vdev_id; 6232 /* peer MAC address */ 6233 struct wmi_mac_addr peer_macaddr; 6234 /* Tid number */ 6235 __le32 tid; 6236 /* Buffer/Window size*/ 6237 __le32 buffersize; 6238 } __packed; 6239 6240 struct wmi_delba_send_cmd { 6241 /* unique id identifying the VDEV, generated by the caller */ 6242 __le32 vdev_id; 6243 /* peer MAC address */ 6244 struct wmi_mac_addr peer_macaddr; 6245 /* Tid number */ 6246 __le32 tid; 6247 /* Is Initiator */ 6248 __le32 initiator; 6249 /* Reason code */ 6250 __le32 reasoncode; 6251 } __packed; 6252 6253 struct wmi_addba_setresponse_cmd { 6254 /* unique id identifying the vdev, generated by the caller */ 6255 __le32 vdev_id; 6256 /* peer mac address */ 6257 struct wmi_mac_addr peer_macaddr; 6258 /* Tid number */ 6259 __le32 tid; 6260 /* status code */ 6261 __le32 statuscode; 6262 } __packed; 6263 6264 struct wmi_send_singleamsdu_cmd { 6265 /* unique id identifying the vdev, generated by the caller */ 6266 __le32 vdev_id; 6267 /* peer mac address */ 6268 struct wmi_mac_addr peer_macaddr; 6269 /* Tid number */ 6270 __le32 tid; 6271 } __packed; 6272 6273 enum wmi_peer_smps_state { 6274 WMI_PEER_SMPS_PS_NONE = 0x0, 6275 WMI_PEER_SMPS_STATIC = 0x1, 6276 WMI_PEER_SMPS_DYNAMIC = 0x2 6277 }; 6278 6279 enum wmi_peer_chwidth { 6280 WMI_PEER_CHWIDTH_20MHZ = 0, 6281 WMI_PEER_CHWIDTH_40MHZ = 1, 6282 WMI_PEER_CHWIDTH_80MHZ = 2, 6283 WMI_PEER_CHWIDTH_160MHZ = 3, 6284 }; 6285 6286 enum wmi_peer_param { 6287 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6288 WMI_PEER_AMPDU = 0x2, 6289 WMI_PEER_AUTHORIZE = 0x3, 6290 WMI_PEER_CHAN_WIDTH = 0x4, 6291 WMI_PEER_NSS = 0x5, 6292 WMI_PEER_USE_4ADDR = 0x6, 6293 WMI_PEER_USE_FIXED_PWR = 0x8, 6294 WMI_PEER_PARAM_FIXED_RATE = 0x9, 6295 WMI_PEER_DEBUG = 0xa, 6296 WMI_PEER_PHYMODE = 0xd, 6297 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6298 }; 6299 6300 struct wmi_peer_set_param_cmd { 6301 __le32 vdev_id; 6302 struct wmi_mac_addr peer_macaddr; 6303 __le32 param_id; 6304 __le32 param_value; 6305 } __packed; 6306 6307 #define MAX_SUPPORTED_RATES 128 6308 6309 struct wmi_rate_set { 6310 /* total number of rates */ 6311 __le32 num_rates; 6312 /* 6313 * rates (each 8bit value) packed into a 32 bit word. 6314 * the rates are filled from least significant byte to most 6315 * significant byte. 6316 */ 6317 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6318 } __packed; 6319 6320 struct wmi_rate_set_arg { 6321 unsigned int num_rates; 6322 u8 rates[MAX_SUPPORTED_RATES]; 6323 }; 6324 6325 /* 6326 * NOTE: It would bea good idea to represent the Tx MCS 6327 * info in one word and Rx in another word. This is split 6328 * into multiple words for convenience 6329 */ 6330 struct wmi_vht_rate_set { 6331 __le32 rx_max_rate; /* Max Rx data rate */ 6332 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6333 __le32 tx_max_rate; /* Max Tx data rate */ 6334 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6335 } __packed; 6336 6337 struct wmi_vht_rate_set_arg { 6338 u32 rx_max_rate; 6339 u32 rx_mcs_set; 6340 u32 tx_max_rate; 6341 u32 tx_mcs_set; 6342 }; 6343 6344 struct wmi_peer_set_rates_cmd { 6345 /* peer MAC address */ 6346 struct wmi_mac_addr peer_macaddr; 6347 /* legacy rate set */ 6348 struct wmi_rate_set peer_legacy_rates; 6349 /* ht rate set */ 6350 struct wmi_rate_set peer_ht_rates; 6351 } __packed; 6352 6353 struct wmi_peer_set_q_empty_callback_cmd { 6354 /* unique id identifying the VDEV, generated by the caller */ 6355 __le32 vdev_id; 6356 /* peer MAC address */ 6357 struct wmi_mac_addr peer_macaddr; 6358 __le32 callback_enable; 6359 } __packed; 6360 6361 struct wmi_peer_flags_map { 6362 u32 auth; 6363 u32 qos; 6364 u32 need_ptk_4_way; 6365 u32 need_gtk_2_way; 6366 u32 apsd; 6367 u32 ht; 6368 u32 bw40; 6369 u32 stbc; 6370 u32 ldbc; 6371 u32 dyn_mimops; 6372 u32 static_mimops; 6373 u32 spatial_mux; 6374 u32 vht; 6375 u32 bw80; 6376 u32 vht_2g; 6377 u32 pmf; 6378 u32 bw160; 6379 }; 6380 6381 enum wmi_peer_flags { 6382 WMI_PEER_AUTH = 0x00000001, 6383 WMI_PEER_QOS = 0x00000002, 6384 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6385 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6386 WMI_PEER_APSD = 0x00000800, 6387 WMI_PEER_HT = 0x00001000, 6388 WMI_PEER_40MHZ = 0x00002000, 6389 WMI_PEER_STBC = 0x00008000, 6390 WMI_PEER_LDPC = 0x00010000, 6391 WMI_PEER_DYN_MIMOPS = 0x00020000, 6392 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6393 WMI_PEER_SPATIAL_MUX = 0x00200000, 6394 WMI_PEER_VHT = 0x02000000, 6395 WMI_PEER_80MHZ = 0x04000000, 6396 WMI_PEER_VHT_2G = 0x08000000, 6397 WMI_PEER_PMF = 0x10000000, 6398 WMI_PEER_160MHZ = 0x20000000 6399 }; 6400 6401 enum wmi_10x_peer_flags { 6402 WMI_10X_PEER_AUTH = 0x00000001, 6403 WMI_10X_PEER_QOS = 0x00000002, 6404 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6405 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6406 WMI_10X_PEER_APSD = 0x00000800, 6407 WMI_10X_PEER_HT = 0x00001000, 6408 WMI_10X_PEER_40MHZ = 0x00002000, 6409 WMI_10X_PEER_STBC = 0x00008000, 6410 WMI_10X_PEER_LDPC = 0x00010000, 6411 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6412 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6413 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6414 WMI_10X_PEER_VHT = 0x02000000, 6415 WMI_10X_PEER_80MHZ = 0x04000000, 6416 WMI_10X_PEER_160MHZ = 0x20000000 6417 }; 6418 6419 enum wmi_10_2_peer_flags { 6420 WMI_10_2_PEER_AUTH = 0x00000001, 6421 WMI_10_2_PEER_QOS = 0x00000002, 6422 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6423 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6424 WMI_10_2_PEER_APSD = 0x00000800, 6425 WMI_10_2_PEER_HT = 0x00001000, 6426 WMI_10_2_PEER_40MHZ = 0x00002000, 6427 WMI_10_2_PEER_STBC = 0x00008000, 6428 WMI_10_2_PEER_LDPC = 0x00010000, 6429 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6430 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6431 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6432 WMI_10_2_PEER_VHT = 0x02000000, 6433 WMI_10_2_PEER_80MHZ = 0x04000000, 6434 WMI_10_2_PEER_VHT_2G = 0x08000000, 6435 WMI_10_2_PEER_PMF = 0x10000000, 6436 WMI_10_2_PEER_160MHZ = 0x20000000 6437 }; 6438 6439 /* 6440 * Peer rate capabilities. 6441 * 6442 * This is of interest to the ratecontrol 6443 * module which resides in the firmware. The bit definitions are 6444 * consistent with that defined in if_athrate.c. 6445 */ 6446 #define WMI_RC_DS_FLAG 0x01 6447 #define WMI_RC_CW40_FLAG 0x02 6448 #define WMI_RC_SGI_FLAG 0x04 6449 #define WMI_RC_HT_FLAG 0x08 6450 #define WMI_RC_RTSCTS_FLAG 0x10 6451 #define WMI_RC_TX_STBC_FLAG 0x20 6452 #define WMI_RC_RX_STBC_FLAG 0xC0 6453 #define WMI_RC_RX_STBC_FLAG_S 6 6454 #define WMI_RC_WEP_TKIP_FLAG 0x100 6455 #define WMI_RC_TS_FLAG 0x200 6456 #define WMI_RC_UAPSD_FLAG 0x400 6457 6458 /* Maximum listen interval supported by hw in units of beacon interval */ 6459 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6460 6461 struct wmi_common_peer_assoc_complete_cmd { 6462 struct wmi_mac_addr peer_macaddr; 6463 __le32 vdev_id; 6464 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6465 __le32 peer_associd; /* 16 LSBs */ 6466 __le32 peer_flags; 6467 __le32 peer_caps; /* 16 LSBs */ 6468 __le32 peer_listen_intval; 6469 __le32 peer_ht_caps; 6470 __le32 peer_max_mpdu; 6471 __le32 peer_mpdu_density; /* 0..16 */ 6472 __le32 peer_rate_caps; 6473 struct wmi_rate_set peer_legacy_rates; 6474 struct wmi_rate_set peer_ht_rates; 6475 __le32 peer_nss; /* num of spatial streams */ 6476 __le32 peer_vht_caps; 6477 __le32 peer_phymode; 6478 struct wmi_vht_rate_set peer_vht_rates; 6479 }; 6480 6481 struct wmi_main_peer_assoc_complete_cmd { 6482 struct wmi_common_peer_assoc_complete_cmd cmd; 6483 6484 /* HT Operation Element of the peer. Five bytes packed in 2 6485 * INT32 array and filled from lsb to msb. 6486 */ 6487 __le32 peer_ht_info[2]; 6488 } __packed; 6489 6490 struct wmi_10_1_peer_assoc_complete_cmd { 6491 struct wmi_common_peer_assoc_complete_cmd cmd; 6492 } __packed; 6493 6494 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6495 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6496 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6497 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6498 6499 struct wmi_10_2_peer_assoc_complete_cmd { 6500 struct wmi_common_peer_assoc_complete_cmd cmd; 6501 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6502 } __packed; 6503 6504 #define PEER_BW_RXNSS_OVERRIDE_OFFSET 31 6505 6506 struct wmi_10_4_peer_assoc_complete_cmd { 6507 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6508 __le32 peer_bw_rxnss_override; 6509 } __packed; 6510 6511 struct wmi_peer_assoc_complete_arg { 6512 u8 addr[ETH_ALEN]; 6513 u32 vdev_id; 6514 bool peer_reassoc; 6515 u16 peer_aid; 6516 u32 peer_flags; /* see %WMI_PEER_ */ 6517 u16 peer_caps; 6518 u32 peer_listen_intval; 6519 u32 peer_ht_caps; 6520 u32 peer_max_mpdu; 6521 u32 peer_mpdu_density; /* 0..16 */ 6522 u32 peer_rate_caps; /* see %WMI_RC_ */ 6523 struct wmi_rate_set_arg peer_legacy_rates; 6524 struct wmi_rate_set_arg peer_ht_rates; 6525 u32 peer_num_spatial_streams; 6526 u32 peer_vht_caps; 6527 enum wmi_phy_mode peer_phymode; 6528 struct wmi_vht_rate_set_arg peer_vht_rates; 6529 u32 peer_bw_rxnss_override; 6530 }; 6531 6532 struct wmi_peer_add_wds_entry_cmd { 6533 /* peer MAC address */ 6534 struct wmi_mac_addr peer_macaddr; 6535 /* wds MAC addr */ 6536 struct wmi_mac_addr wds_macaddr; 6537 } __packed; 6538 6539 struct wmi_peer_remove_wds_entry_cmd { 6540 /* wds MAC addr */ 6541 struct wmi_mac_addr wds_macaddr; 6542 } __packed; 6543 6544 struct wmi_peer_q_empty_callback_event { 6545 /* peer MAC address */ 6546 struct wmi_mac_addr peer_macaddr; 6547 } __packed; 6548 6549 /* 6550 * Channel info WMI event 6551 */ 6552 struct wmi_chan_info_event { 6553 __le32 err_code; 6554 __le32 freq; 6555 __le32 cmd_flags; 6556 __le32 noise_floor; 6557 __le32 rx_clear_count; 6558 __le32 cycle_count; 6559 } __packed; 6560 6561 struct wmi_10_4_chan_info_event { 6562 __le32 err_code; 6563 __le32 freq; 6564 __le32 cmd_flags; 6565 __le32 noise_floor; 6566 __le32 rx_clear_count; 6567 __le32 cycle_count; 6568 __le32 chan_tx_pwr_range; 6569 __le32 chan_tx_pwr_tp; 6570 __le32 rx_frame_count; 6571 } __packed; 6572 6573 struct wmi_peer_sta_kickout_event { 6574 struct wmi_mac_addr peer_macaddr; 6575 } __packed; 6576 6577 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6578 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6579 6580 /* Beacon filter wmi command info */ 6581 #define BCN_FLT_MAX_SUPPORTED_IES 256 6582 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6583 6584 struct bss_bcn_stats { 6585 __le32 vdev_id; 6586 __le32 bss_bcnsdropped; 6587 __le32 bss_bcnsdelivered; 6588 } __packed; 6589 6590 struct bcn_filter_stats { 6591 __le32 bcns_dropped; 6592 __le32 bcns_delivered; 6593 __le32 activefilters; 6594 struct bss_bcn_stats bss_stats; 6595 } __packed; 6596 6597 struct wmi_add_bcn_filter_cmd { 6598 u32 vdev_id; 6599 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6600 } __packed; 6601 6602 enum wmi_sta_keepalive_method { 6603 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6604 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6605 }; 6606 6607 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6608 6609 /* Firmware crashes if keepalive interval exceeds this limit */ 6610 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6611 6612 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6613 struct wmi_sta_keepalive_arp_resp { 6614 __be32 src_ip4_addr; 6615 __be32 dest_ip4_addr; 6616 struct wmi_mac_addr dest_mac_addr; 6617 } __packed; 6618 6619 struct wmi_sta_keepalive_cmd { 6620 __le32 vdev_id; 6621 __le32 enabled; 6622 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6623 __le32 interval; /* in seconds */ 6624 struct wmi_sta_keepalive_arp_resp arp_resp; 6625 } __packed; 6626 6627 struct wmi_sta_keepalive_arg { 6628 u32 vdev_id; 6629 u32 enabled; 6630 u32 method; 6631 u32 interval; 6632 __be32 src_ip4_addr; 6633 __be32 dest_ip4_addr; 6634 const u8 dest_mac_addr[ETH_ALEN]; 6635 }; 6636 6637 enum wmi_force_fw_hang_type { 6638 WMI_FORCE_FW_HANG_ASSERT = 1, 6639 WMI_FORCE_FW_HANG_NO_DETECT, 6640 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6641 WMI_FORCE_FW_HANG_EMPTY_POINT, 6642 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6643 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6644 }; 6645 6646 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6647 6648 struct wmi_force_fw_hang_cmd { 6649 __le32 type; 6650 __le32 delay_ms; 6651 } __packed; 6652 6653 enum wmi_pdev_reset_mode_type { 6654 WMI_RST_MODE_TX_FLUSH = 1, 6655 WMI_RST_MODE_WARM_RESET, 6656 WMI_RST_MODE_COLD_RESET, 6657 WMI_RST_MODE_WARM_RESET_RESTORE_CAL, 6658 WMI_RST_MODE_COLD_RESET_RESTORE_CAL, 6659 WMI_RST_MODE_MAX, 6660 }; 6661 6662 enum ath10k_dbglog_level { 6663 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6664 ATH10K_DBGLOG_LEVEL_INFO = 1, 6665 ATH10K_DBGLOG_LEVEL_WARN = 2, 6666 ATH10K_DBGLOG_LEVEL_ERR = 3, 6667 }; 6668 6669 /* VAP ids to enable dbglog */ 6670 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6671 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6672 6673 /* to enable dbglog in the firmware */ 6674 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6675 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6676 6677 /* timestamp resolution */ 6678 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6679 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6680 6681 /* number of queued messages before sending them to the host */ 6682 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6683 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6684 6685 /* 6686 * Log levels to enable. This defines the minimum level to enable, this is 6687 * not a bitmask. See enum ath10k_dbglog_level for the values. 6688 */ 6689 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6690 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6691 6692 /* 6693 * Note: this is a cleaned up version of a struct firmware uses. For 6694 * example, config_valid was hidden inside an array. 6695 */ 6696 struct wmi_dbglog_cfg_cmd { 6697 /* bitmask to hold mod id config*/ 6698 __le32 module_enable; 6699 6700 /* see ATH10K_DBGLOG_CFG_ */ 6701 __le32 config_enable; 6702 6703 /* mask of module id bits to be changed */ 6704 __le32 module_valid; 6705 6706 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6707 __le32 config_valid; 6708 } __packed; 6709 6710 struct wmi_10_4_dbglog_cfg_cmd { 6711 /* bitmask to hold mod id config*/ 6712 __le64 module_enable; 6713 6714 /* see ATH10K_DBGLOG_CFG_ */ 6715 __le32 config_enable; 6716 6717 /* mask of module id bits to be changed */ 6718 __le64 module_valid; 6719 6720 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6721 __le32 config_valid; 6722 } __packed; 6723 6724 enum wmi_roam_reason { 6725 WMI_ROAM_REASON_BETTER_AP = 1, 6726 WMI_ROAM_REASON_BEACON_MISS = 2, 6727 WMI_ROAM_REASON_LOW_RSSI = 3, 6728 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6729 WMI_ROAM_REASON_HO_FAILED = 5, 6730 6731 /* keep last */ 6732 WMI_ROAM_REASON_MAX, 6733 }; 6734 6735 struct wmi_roam_ev { 6736 __le32 vdev_id; 6737 __le32 reason; 6738 } __packed; 6739 6740 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6741 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6742 6743 #define WMI_MAX_EVENT 0x1000 6744 /* Maximum number of pending TXed WMI packets */ 6745 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6746 6747 /* By default disable power save for IBSS */ 6748 #define ATH10K_DEFAULT_ATIM 0 6749 6750 #define WMI_MAX_MEM_REQS 16 6751 6752 struct wmi_scan_ev_arg { 6753 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6754 __le32 reason; /* %WMI_SCAN_REASON_ */ 6755 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6756 __le32 scan_req_id; 6757 __le32 scan_id; 6758 __le32 vdev_id; 6759 }; 6760 6761 struct mgmt_tx_compl_params { 6762 u32 desc_id; 6763 u32 status; 6764 u32 ppdu_id; 6765 int ack_rssi; 6766 }; 6767 6768 struct wmi_tlv_mgmt_tx_compl_ev_arg { 6769 __le32 desc_id; 6770 __le32 status; 6771 __le32 pdev_id; 6772 __le32 ppdu_id; 6773 __le32 ack_rssi; 6774 }; 6775 6776 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg { 6777 __le32 num_reports; 6778 const __le32 *desc_ids; 6779 const __le32 *status; 6780 const __le32 *ppdu_ids; 6781 const __le32 *ack_rssi; 6782 }; 6783 6784 struct wmi_peer_delete_resp_ev_arg { 6785 __le32 vdev_id; 6786 struct wmi_mac_addr peer_addr; 6787 }; 6788 6789 #define WMI_MGMT_RX_NUM_RSSI 4 6790 struct wmi_mgmt_rx_ev_arg { 6791 __le32 channel; 6792 __le32 snr; 6793 __le32 rate; 6794 __le32 phy_mode; 6795 __le32 buf_len; 6796 __le32 status; /* %WMI_RX_STATUS_ */ 6797 struct wmi_mgmt_rx_ext_info ext_info; 6798 __le32 rssi[WMI_MGMT_RX_NUM_RSSI]; 6799 }; 6800 6801 struct wmi_ch_info_ev_arg { 6802 __le32 err_code; 6803 __le32 freq; 6804 __le32 cmd_flags; 6805 __le32 noise_floor; 6806 __le32 rx_clear_count; 6807 __le32 cycle_count; 6808 __le32 chan_tx_pwr_range; 6809 __le32 chan_tx_pwr_tp; 6810 __le32 rx_frame_count; 6811 __le32 my_bss_rx_cycle_count; 6812 __le32 rx_11b_mode_data_duration; 6813 __le32 tx_frame_cnt; 6814 __le32 mac_clk_mhz; 6815 }; 6816 6817 /* From 10.4 firmware, not sure all have the same values. */ 6818 enum wmi_vdev_start_status { 6819 WMI_VDEV_START_OK = 0, 6820 WMI_VDEV_START_CHAN_INVALID, 6821 }; 6822 6823 struct wmi_vdev_start_ev_arg { 6824 __le32 vdev_id; 6825 __le32 req_id; 6826 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6827 __le32 status; /* See wmi_vdev_start_status enum above */ 6828 }; 6829 6830 struct wmi_peer_kick_ev_arg { 6831 const u8 *mac_addr; 6832 }; 6833 6834 struct wmi_swba_ev_arg { 6835 __le32 vdev_map; 6836 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6837 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6838 }; 6839 6840 struct wmi_phyerr_ev_arg { 6841 u32 tsf_timestamp; 6842 u16 freq1; 6843 u16 freq2; 6844 u8 rssi_combined; 6845 u8 chan_width_mhz; 6846 u8 phy_err_code; 6847 u16 nf_chains[4]; 6848 u32 buf_len; 6849 const u8 *buf; 6850 u8 hdr_len; 6851 }; 6852 6853 struct wmi_phyerr_hdr_arg { 6854 u32 num_phyerrs; 6855 u32 tsf_l32; 6856 u32 tsf_u32; 6857 u32 buf_len; 6858 const void *phyerrs; 6859 }; 6860 6861 struct wmi_dfs_status_ev_arg { 6862 u32 status; 6863 }; 6864 6865 struct wmi_svc_rdy_ev_arg { 6866 __le32 min_tx_power; 6867 __le32 max_tx_power; 6868 __le32 ht_cap; 6869 __le32 vht_cap; 6870 __le32 vht_supp_mcs; 6871 __le32 sw_ver0; 6872 __le32 sw_ver1; 6873 __le32 fw_build; 6874 __le32 phy_capab; 6875 __le32 num_rf_chains; 6876 __le32 eeprom_rd; 6877 __le32 num_mem_reqs; 6878 __le32 low_2ghz_chan; 6879 __le32 high_2ghz_chan; 6880 __le32 low_5ghz_chan; 6881 __le32 high_5ghz_chan; 6882 __le32 sys_cap_info; 6883 const __le32 *service_map; 6884 size_t service_map_len; 6885 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6886 }; 6887 6888 struct wmi_svc_avail_ev_arg { 6889 __le32 service_map_ext_len; 6890 const __le32 *service_map_ext; 6891 }; 6892 6893 struct wmi_rdy_ev_arg { 6894 __le32 sw_version; 6895 __le32 abi_version; 6896 __le32 status; 6897 const u8 *mac_addr; 6898 }; 6899 6900 struct wmi_roam_ev_arg { 6901 __le32 vdev_id; 6902 __le32 reason; 6903 __le32 rssi; 6904 }; 6905 6906 struct wmi_echo_ev_arg { 6907 __le32 value; 6908 }; 6909 6910 struct wmi_pdev_temperature_event { 6911 /* temperature value in Celcius degree */ 6912 __le32 temperature; 6913 } __packed; 6914 6915 struct wmi_pdev_bss_chan_info_event { 6916 __le32 freq; 6917 __le32 noise_floor; 6918 __le64 cycle_busy; 6919 __le64 cycle_total; 6920 __le64 cycle_tx; 6921 __le64 cycle_rx; 6922 __le64 cycle_rx_bss; 6923 __le32 reserved; 6924 } __packed; 6925 6926 /* WOW structures */ 6927 enum wmi_wow_wakeup_event { 6928 WOW_BMISS_EVENT = 0, 6929 WOW_BETTER_AP_EVENT, 6930 WOW_DEAUTH_RECVD_EVENT, 6931 WOW_MAGIC_PKT_RECVD_EVENT, 6932 WOW_GTK_ERR_EVENT, 6933 WOW_FOURWAY_HSHAKE_EVENT, 6934 WOW_EAPOL_RECVD_EVENT, 6935 WOW_NLO_DETECTED_EVENT, 6936 WOW_DISASSOC_RECVD_EVENT, 6937 WOW_PATTERN_MATCH_EVENT, 6938 WOW_CSA_IE_EVENT, 6939 WOW_PROBE_REQ_WPS_IE_EVENT, 6940 WOW_AUTH_REQ_EVENT, 6941 WOW_ASSOC_REQ_EVENT, 6942 WOW_HTT_EVENT, 6943 WOW_RA_MATCH_EVENT, 6944 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6945 WOW_IOAC_MAGIC_EVENT, 6946 WOW_IOAC_SHORT_EVENT, 6947 WOW_IOAC_EXTEND_EVENT, 6948 WOW_IOAC_TIMER_EVENT, 6949 WOW_DFS_PHYERR_RADAR_EVENT, 6950 WOW_BEACON_EVENT, 6951 WOW_CLIENT_KICKOUT_EVENT, 6952 WOW_EVENT_MAX, 6953 }; 6954 6955 #define C2S(x) case x: return #x 6956 6957 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6958 { 6959 switch (ev) { 6960 C2S(WOW_BMISS_EVENT); 6961 C2S(WOW_BETTER_AP_EVENT); 6962 C2S(WOW_DEAUTH_RECVD_EVENT); 6963 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6964 C2S(WOW_GTK_ERR_EVENT); 6965 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6966 C2S(WOW_EAPOL_RECVD_EVENT); 6967 C2S(WOW_NLO_DETECTED_EVENT); 6968 C2S(WOW_DISASSOC_RECVD_EVENT); 6969 C2S(WOW_PATTERN_MATCH_EVENT); 6970 C2S(WOW_CSA_IE_EVENT); 6971 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6972 C2S(WOW_AUTH_REQ_EVENT); 6973 C2S(WOW_ASSOC_REQ_EVENT); 6974 C2S(WOW_HTT_EVENT); 6975 C2S(WOW_RA_MATCH_EVENT); 6976 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6977 C2S(WOW_IOAC_MAGIC_EVENT); 6978 C2S(WOW_IOAC_SHORT_EVENT); 6979 C2S(WOW_IOAC_EXTEND_EVENT); 6980 C2S(WOW_IOAC_TIMER_EVENT); 6981 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6982 C2S(WOW_BEACON_EVENT); 6983 C2S(WOW_CLIENT_KICKOUT_EVENT); 6984 C2S(WOW_EVENT_MAX); 6985 default: 6986 return NULL; 6987 } 6988 } 6989 6990 enum wmi_wow_wake_reason { 6991 WOW_REASON_UNSPECIFIED = -1, 6992 WOW_REASON_NLOD = 0, 6993 WOW_REASON_AP_ASSOC_LOST, 6994 WOW_REASON_LOW_RSSI, 6995 WOW_REASON_DEAUTH_RECVD, 6996 WOW_REASON_DISASSOC_RECVD, 6997 WOW_REASON_GTK_HS_ERR, 6998 WOW_REASON_EAP_REQ, 6999 WOW_REASON_FOURWAY_HS_RECV, 7000 WOW_REASON_TIMER_INTR_RECV, 7001 WOW_REASON_PATTERN_MATCH_FOUND, 7002 WOW_REASON_RECV_MAGIC_PATTERN, 7003 WOW_REASON_P2P_DISC, 7004 WOW_REASON_WLAN_HB, 7005 WOW_REASON_CSA_EVENT, 7006 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 7007 WOW_REASON_AUTH_REQ_RECV, 7008 WOW_REASON_ASSOC_REQ_RECV, 7009 WOW_REASON_HTT_EVENT, 7010 WOW_REASON_RA_MATCH, 7011 WOW_REASON_HOST_AUTO_SHUTDOWN, 7012 WOW_REASON_IOAC_MAGIC_EVENT, 7013 WOW_REASON_IOAC_SHORT_EVENT, 7014 WOW_REASON_IOAC_EXTEND_EVENT, 7015 WOW_REASON_IOAC_TIMER_EVENT, 7016 WOW_REASON_ROAM_HO, 7017 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 7018 WOW_REASON_BEACON_RECV, 7019 WOW_REASON_CLIENT_KICKOUT_EVENT, 7020 WOW_REASON_DEBUG_TEST = 0xFF, 7021 }; 7022 7023 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 7024 { 7025 switch (reason) { 7026 C2S(WOW_REASON_UNSPECIFIED); 7027 C2S(WOW_REASON_NLOD); 7028 C2S(WOW_REASON_AP_ASSOC_LOST); 7029 C2S(WOW_REASON_LOW_RSSI); 7030 C2S(WOW_REASON_DEAUTH_RECVD); 7031 C2S(WOW_REASON_DISASSOC_RECVD); 7032 C2S(WOW_REASON_GTK_HS_ERR); 7033 C2S(WOW_REASON_EAP_REQ); 7034 C2S(WOW_REASON_FOURWAY_HS_RECV); 7035 C2S(WOW_REASON_TIMER_INTR_RECV); 7036 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 7037 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 7038 C2S(WOW_REASON_P2P_DISC); 7039 C2S(WOW_REASON_WLAN_HB); 7040 C2S(WOW_REASON_CSA_EVENT); 7041 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 7042 C2S(WOW_REASON_AUTH_REQ_RECV); 7043 C2S(WOW_REASON_ASSOC_REQ_RECV); 7044 C2S(WOW_REASON_HTT_EVENT); 7045 C2S(WOW_REASON_RA_MATCH); 7046 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 7047 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 7048 C2S(WOW_REASON_IOAC_SHORT_EVENT); 7049 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 7050 C2S(WOW_REASON_IOAC_TIMER_EVENT); 7051 C2S(WOW_REASON_ROAM_HO); 7052 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 7053 C2S(WOW_REASON_BEACON_RECV); 7054 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 7055 C2S(WOW_REASON_DEBUG_TEST); 7056 default: 7057 return NULL; 7058 } 7059 } 7060 7061 #undef C2S 7062 7063 struct wmi_wow_ev_arg { 7064 u32 vdev_id; 7065 u32 flag; 7066 enum wmi_wow_wake_reason wake_reason; 7067 u32 data_len; 7068 }; 7069 7070 #define WOW_MIN_PATTERN_SIZE 1 7071 #define WOW_MAX_PATTERN_SIZE 148 7072 #define WOW_MAX_PKT_OFFSET 128 7073 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ 7074 sizeof(struct rfc1042_hdr)) 7075 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ 7076 offsetof(struct ieee80211_hdr_3addr, addr1)) 7077 7078 enum wmi_tdls_state { 7079 WMI_TDLS_DISABLE, 7080 WMI_TDLS_ENABLE_PASSIVE, 7081 WMI_TDLS_ENABLE_ACTIVE, 7082 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, 7083 }; 7084 7085 enum wmi_tdls_peer_state { 7086 WMI_TDLS_PEER_STATE_PEERING, 7087 WMI_TDLS_PEER_STATE_CONNECTED, 7088 WMI_TDLS_PEER_STATE_TEARDOWN, 7089 }; 7090 7091 struct wmi_tdls_peer_update_cmd_arg { 7092 u32 vdev_id; 7093 enum wmi_tdls_peer_state peer_state; 7094 u8 addr[ETH_ALEN]; 7095 }; 7096 7097 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 7098 7099 #define WMI_TDLS_PEER_SP_MASK 0x60 7100 #define WMI_TDLS_PEER_SP_LSB 5 7101 7102 enum wmi_tdls_options { 7103 WMI_TDLS_OFFCHAN_EN = BIT(0), 7104 WMI_TDLS_BUFFER_STA_EN = BIT(1), 7105 WMI_TDLS_SLEEP_STA_EN = BIT(2), 7106 }; 7107 7108 enum { 7109 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 7110 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 7111 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 7112 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 7113 }; 7114 7115 struct wmi_tdls_peer_capab_arg { 7116 u8 peer_uapsd_queues; 7117 u8 peer_max_sp; 7118 u32 buff_sta_support; 7119 u32 off_chan_support; 7120 u32 peer_curr_operclass; 7121 u32 self_curr_operclass; 7122 u32 peer_chan_len; 7123 u32 peer_operclass_len; 7124 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7125 u32 is_peer_responder; 7126 u32 pref_offchan_num; 7127 u32 pref_offchan_bw; 7128 }; 7129 7130 struct wmi_10_4_tdls_set_state_cmd { 7131 __le32 vdev_id; 7132 __le32 state; 7133 __le32 notification_interval_ms; 7134 __le32 tx_discovery_threshold; 7135 __le32 tx_teardown_threshold; 7136 __le32 rssi_teardown_threshold; 7137 __le32 rssi_delta; 7138 __le32 tdls_options; 7139 __le32 tdls_peer_traffic_ind_window; 7140 __le32 tdls_peer_traffic_response_timeout_ms; 7141 __le32 tdls_puapsd_mask; 7142 __le32 tdls_puapsd_inactivity_time_ms; 7143 __le32 tdls_puapsd_rx_frame_threshold; 7144 __le32 teardown_notification_ms; 7145 __le32 tdls_peer_kickout_threshold; 7146 } __packed; 7147 7148 struct wmi_tdls_peer_capabilities { 7149 __le32 peer_qos; 7150 __le32 buff_sta_support; 7151 __le32 off_chan_support; 7152 __le32 peer_curr_operclass; 7153 __le32 self_curr_operclass; 7154 __le32 peer_chan_len; 7155 __le32 peer_operclass_len; 7156 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7157 __le32 is_peer_responder; 7158 __le32 pref_offchan_num; 7159 __le32 pref_offchan_bw; 7160 struct wmi_channel peer_chan_list[1]; 7161 } __packed; 7162 7163 struct wmi_10_4_tdls_peer_update_cmd { 7164 __le32 vdev_id; 7165 struct wmi_mac_addr peer_macaddr; 7166 __le32 peer_state; 7167 __le32 reserved[4]; 7168 struct wmi_tdls_peer_capabilities peer_capab; 7169 } __packed; 7170 7171 enum wmi_tdls_peer_reason { 7172 WMI_TDLS_TEARDOWN_REASON_TX, 7173 WMI_TDLS_TEARDOWN_REASON_RSSI, 7174 WMI_TDLS_TEARDOWN_REASON_SCAN, 7175 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 7176 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 7177 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 7178 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 7179 WMI_TDLS_ENTER_BUF_STA, 7180 WMI_TDLS_EXIT_BUF_STA, 7181 WMI_TDLS_ENTER_BT_BUSY_MODE, 7182 WMI_TDLS_EXIT_BT_BUSY_MODE, 7183 WMI_TDLS_SCAN_STARTED_EVENT, 7184 WMI_TDLS_SCAN_COMPLETED_EVENT, 7185 }; 7186 7187 enum wmi_tdls_peer_notification { 7188 WMI_TDLS_SHOULD_DISCOVER, 7189 WMI_TDLS_SHOULD_TEARDOWN, 7190 WMI_TDLS_PEER_DISCONNECTED, 7191 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 7192 }; 7193 7194 struct wmi_tdls_peer_event { 7195 struct wmi_mac_addr peer_macaddr; 7196 /* see enum wmi_tdls_peer_notification*/ 7197 __le32 peer_status; 7198 /* see enum wmi_tdls_peer_reason */ 7199 __le32 peer_reason; 7200 __le32 vdev_id; 7201 } __packed; 7202 7203 enum wmi_txbf_conf { 7204 WMI_TXBF_CONF_UNSUPPORTED, 7205 WMI_TXBF_CONF_BEFORE_ASSOC, 7206 WMI_TXBF_CONF_AFTER_ASSOC, 7207 }; 7208 7209 #define WMI_CCA_DETECT_LEVEL_AUTO 0 7210 #define WMI_CCA_DETECT_MARGIN_AUTO 0 7211 7212 struct wmi_pdev_set_adaptive_cca_params { 7213 __le32 enable; 7214 __le32 cca_detect_level; 7215 __le32 cca_detect_margin; 7216 } __packed; 7217 7218 #define WMI_PNO_MAX_SCHED_SCAN_PLANS 2 7219 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200 7220 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100 7221 #define WMI_PNO_MAX_NETW_CHANNELS 26 7222 #define WMI_PNO_MAX_NETW_CHANNELS_EX 60 7223 #define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID 7224 #define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN 7225 7226 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/ 7227 #define WMI_PNO_MAX_PB_REQ_SIZE 450 7228 7229 #define WMI_PNO_24G_DEFAULT_CH 1 7230 #define WMI_PNO_5G_DEFAULT_CH 36 7231 7232 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40 7233 #define WMI_PASSIVE_MAX_CHANNEL_TIME 110 7234 7235 /* SSID broadcast type */ 7236 enum wmi_SSID_bcast_type { 7237 BCAST_UNKNOWN = 0, 7238 BCAST_NORMAL = 1, 7239 BCAST_HIDDEN = 2, 7240 }; 7241 7242 struct wmi_network_type { 7243 struct wmi_ssid ssid; 7244 u32 authentication; 7245 u32 encryption; 7246 u32 bcast_nw_type; 7247 u8 channel_count; 7248 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX]; 7249 s32 rssi_threshold; 7250 } __packed; 7251 7252 struct wmi_pno_scan_req { 7253 u8 enable; 7254 u8 vdev_id; 7255 u8 uc_networks_count; 7256 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS]; 7257 u32 fast_scan_period; 7258 u32 slow_scan_period; 7259 u8 fast_scan_max_cycles; 7260 7261 bool do_passive_scan; 7262 7263 u32 delay_start_time; 7264 u32 active_min_time; 7265 u32 active_max_time; 7266 u32 passive_min_time; 7267 u32 passive_max_time; 7268 7269 /* mac address randomization attributes */ 7270 u32 enable_pno_scan_randomization; 7271 u8 mac_addr[ETH_ALEN]; 7272 u8 mac_addr_mask[ETH_ALEN]; 7273 } __packed; 7274 7275 enum wmi_host_platform_type { 7276 WMI_HOST_PLATFORM_HIGH_PERF, 7277 WMI_HOST_PLATFORM_LOW_PERF, 7278 }; 7279 7280 enum wmi_bss_survey_req_type { 7281 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 7282 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 7283 }; 7284 7285 struct wmi_pdev_chan_info_req_cmd { 7286 __le32 type; 7287 __le32 reserved; 7288 } __packed; 7289 7290 /* bb timing register configurations */ 7291 struct wmi_bb_timing_cfg_arg { 7292 /* Tx_end to pa off timing */ 7293 u32 bb_tx_timing; 7294 7295 /* Tx_end to external pa off timing */ 7296 u32 bb_xpa_timing; 7297 }; 7298 7299 struct wmi_pdev_bb_timing_cfg_cmd { 7300 /* Tx_end to pa off timing */ 7301 __le32 bb_tx_timing; 7302 7303 /* Tx_end to external pa off timing */ 7304 __le32 bb_xpa_timing; 7305 } __packed; 7306 7307 struct ath10k; 7308 struct ath10k_vif; 7309 struct ath10k_fw_stats_pdev; 7310 struct ath10k_fw_stats_peer; 7311 struct ath10k_fw_stats; 7312 7313 int ath10k_wmi_attach(struct ath10k *ar); 7314 void ath10k_wmi_detach(struct ath10k *ar); 7315 void ath10k_wmi_free_host_mem(struct ath10k *ar); 7316 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 7317 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 7318 7319 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7320 int ath10k_wmi_connect(struct ath10k *ar); 7321 7322 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7323 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 7324 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 7325 u32 cmd_id); 7326 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 7327 7328 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 7329 struct ath10k_fw_stats_pdev *dst); 7330 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 7331 struct ath10k_fw_stats_pdev *dst); 7332 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 7333 struct ath10k_fw_stats_pdev *dst); 7334 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 7335 struct ath10k_fw_stats_pdev *dst); 7336 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 7337 struct ath10k_fw_stats_peer *dst); 7338 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 7339 struct wmi_host_mem_chunks *chunks); 7340 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 7341 const struct wmi_start_scan_arg *arg); 7342 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 7343 const struct wmi_wmm_params_arg *arg); 7344 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 7345 const struct wmi_channel_arg *arg); 7346 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 7347 7348 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 7349 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 7350 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb); 7351 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb); 7352 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 7353 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 7354 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 7355 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 7356 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 7357 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 7358 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 7359 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 7360 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 7361 void ath10k_wmi_event_dfs(struct ath10k *ar, 7362 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 7363 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 7364 struct wmi_phyerr_ev_arg *phyerr, 7365 u64 tsf); 7366 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 7367 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 7368 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 7369 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 7370 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 7371 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 7372 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 7373 struct sk_buff *skb); 7374 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 7375 struct sk_buff *skb); 7376 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 7377 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 7378 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 7379 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 7380 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 7381 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 7382 struct sk_buff *skb); 7383 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 7384 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 7385 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 7386 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 7387 struct sk_buff *skb); 7388 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 7389 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 7390 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 7391 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 7392 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 7393 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); 7394 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 7395 int left_len, struct wmi_phyerr_ev_arg *arg); 7396 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 7397 struct ath10k_fw_stats *fw_stats, 7398 char *buf); 7399 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 7400 struct ath10k_fw_stats *fw_stats, 7401 char *buf); 7402 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 7403 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 7404 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 7405 struct ath10k_fw_stats *fw_stats, 7406 char *buf); 7407 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 7408 enum wmi_vdev_subtype subtype); 7409 int ath10k_wmi_barrier(struct ath10k *ar); 7410 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, 7411 u32 num_tx_chain); 7412 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); 7413 7414 #endif /* _WMI_H_ */ 7415