1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 4 * Copyright (c) 2018, The Linux Foundation. All rights reserved. 5 * 6 * Permission to use, copy, modify, and/or distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 #ifndef _WMI_H_ 20 #define _WMI_H_ 21 22 #include <linux/types.h> 23 #include <net/mac80211.h> 24 25 /* 26 * This file specifies the WMI interface for the Unified Software 27 * Architecture. 28 * 29 * It includes definitions of all the commands and events. Commands are 30 * messages from the host to the target. Events and Replies are messages 31 * from the target to the host. 32 * 33 * Ownership of correctness in regards to WMI commands belongs to the host 34 * driver and the target is not required to validate parameters for value, 35 * proper range, or any other checking. 36 * 37 * Guidelines for extending this interface are below. 38 * 39 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 40 * 41 * 2. Use ONLY u32 type for defining member variables within WMI 42 * command/event structures. Do not use u8, u16, bool or 43 * enum types within these structures. 44 * 45 * 3. DO NOT define bit fields within structures. Implement bit fields 46 * using masks if necessary. Do not use the programming language's bit 47 * field definition. 48 * 49 * 4. Define macros for encode/decode of u8, u16 fields within 50 * the u32 variables. Use these macros for set/get of these fields. 51 * Try to use this to optimize the structure without bloating it with 52 * u32 variables for every lower sized field. 53 * 54 * 5. Do not use PACK/UNPACK attributes for the structures as each member 55 * variable is already 4-byte aligned by virtue of being a u32 56 * type. 57 * 58 * 6. Comment each parameter part of the WMI command/event structure by 59 * using the 2 stars at the beginning of C comment instead of one star to 60 * enable HTML document generation using Doxygen. 61 * 62 */ 63 64 /* Control Path */ 65 struct wmi_cmd_hdr { 66 __le32 cmd_id; 67 } __packed; 68 69 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 70 #define WMI_CMD_HDR_CMD_ID_LSB 0 71 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 72 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 73 74 #define HTC_PROTOCOL_VERSION 0x0002 75 #define WMI_PROTOCOL_VERSION 0x0002 76 77 /* 78 * There is no signed version of __le32, so for a temporary solution come 79 * up with our own version. The idea is from fs/ntfs/endian.h. 80 * 81 * Use a_ prefix so that it doesn't conflict if we get proper support to 82 * linux/types.h. 83 */ 84 typedef __s32 __bitwise a_sle32; 85 86 static inline a_sle32 a_cpu_to_sle32(s32 val) 87 { 88 return (__force a_sle32)cpu_to_le32(val); 89 } 90 91 static inline s32 a_sle32_to_cpu(a_sle32 val) 92 { 93 return le32_to_cpu((__force __le32)val); 94 } 95 96 enum wmi_service { 97 WMI_SERVICE_BEACON_OFFLOAD = 0, 98 WMI_SERVICE_SCAN_OFFLOAD, 99 WMI_SERVICE_ROAM_OFFLOAD, 100 WMI_SERVICE_BCN_MISS_OFFLOAD, 101 WMI_SERVICE_STA_PWRSAVE, 102 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 103 WMI_SERVICE_AP_UAPSD, 104 WMI_SERVICE_AP_DFS, 105 WMI_SERVICE_11AC, 106 WMI_SERVICE_BLOCKACK, 107 WMI_SERVICE_PHYERR, 108 WMI_SERVICE_BCN_FILTER, 109 WMI_SERVICE_RTT, 110 WMI_SERVICE_RATECTRL, 111 WMI_SERVICE_WOW, 112 WMI_SERVICE_RATECTRL_CACHE, 113 WMI_SERVICE_IRAM_TIDS, 114 WMI_SERVICE_ARPNS_OFFLOAD, 115 WMI_SERVICE_NLO, 116 WMI_SERVICE_GTK_OFFLOAD, 117 WMI_SERVICE_SCAN_SCH, 118 WMI_SERVICE_CSA_OFFLOAD, 119 WMI_SERVICE_CHATTER, 120 WMI_SERVICE_COEX_FREQAVOID, 121 WMI_SERVICE_PACKET_POWER_SAVE, 122 WMI_SERVICE_FORCE_FW_HANG, 123 WMI_SERVICE_GPIO, 124 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 125 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 126 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 127 WMI_SERVICE_STA_KEEP_ALIVE, 128 WMI_SERVICE_TX_ENCAP, 129 WMI_SERVICE_BURST, 130 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 131 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 132 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 133 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 134 WMI_SERVICE_EARLY_RX, 135 WMI_SERVICE_STA_SMPS, 136 WMI_SERVICE_FWTEST, 137 WMI_SERVICE_STA_WMMAC, 138 WMI_SERVICE_TDLS, 139 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 140 WMI_SERVICE_ADAPTIVE_OCS, 141 WMI_SERVICE_BA_SSN_SUPPORT, 142 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 143 WMI_SERVICE_WLAN_HB, 144 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 145 WMI_SERVICE_BATCH_SCAN, 146 WMI_SERVICE_QPOWER, 147 WMI_SERVICE_PLMREQ, 148 WMI_SERVICE_THERMAL_MGMT, 149 WMI_SERVICE_RMC, 150 WMI_SERVICE_MHF_OFFLOAD, 151 WMI_SERVICE_COEX_SAR, 152 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 153 WMI_SERVICE_NAN, 154 WMI_SERVICE_L1SS_STAT, 155 WMI_SERVICE_ESTIMATE_LINKSPEED, 156 WMI_SERVICE_OBSS_SCAN, 157 WMI_SERVICE_TDLS_OFFCHAN, 158 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 159 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 160 WMI_SERVICE_IBSS_PWRSAVE, 161 WMI_SERVICE_LPASS, 162 WMI_SERVICE_EXTSCAN, 163 WMI_SERVICE_D0WOW, 164 WMI_SERVICE_HSOFFLOAD, 165 WMI_SERVICE_ROAM_HO_OFFLOAD, 166 WMI_SERVICE_RX_FULL_REORDER, 167 WMI_SERVICE_DHCP_OFFLOAD, 168 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 169 WMI_SERVICE_MDNS_OFFLOAD, 170 WMI_SERVICE_SAP_AUTH_OFFLOAD, 171 WMI_SERVICE_ATF, 172 WMI_SERVICE_COEX_GPIO, 173 WMI_SERVICE_ENHANCED_PROXY_STA, 174 WMI_SERVICE_TT, 175 WMI_SERVICE_PEER_CACHING, 176 WMI_SERVICE_AUX_SPECTRAL_INTF, 177 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 178 WMI_SERVICE_BSS_CHANNEL_INFO_64, 179 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 180 WMI_SERVICE_MESH_11S, 181 WMI_SERVICE_MESH_NON_11S, 182 WMI_SERVICE_PEER_STATS, 183 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 184 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 185 WMI_SERVICE_TX_MODE_PUSH_ONLY, 186 WMI_SERVICE_TX_MODE_PUSH_PULL, 187 WMI_SERVICE_TX_MODE_DYNAMIC, 188 WMI_SERVICE_VDEV_RX_FILTER, 189 WMI_SERVICE_BTCOEX, 190 WMI_SERVICE_CHECK_CAL_VERSION, 191 WMI_SERVICE_DBGLOG_WARN2, 192 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 193 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 194 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 195 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 196 WMI_SERVICE_SMART_LOGGING_SUPPORT, 197 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 198 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 199 WMI_SERVICE_MGMT_TX_WMI, 200 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 201 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 202 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, 203 WMI_SERVICE_TPC_STATS_FINAL, 204 WMI_SERVICE_RESET_CHIP, 205 WMI_SERVICE_SPOOF_MAC_SUPPORT, 206 207 /* keep last */ 208 WMI_SERVICE_MAX, 209 }; 210 211 enum wmi_10x_service { 212 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 213 WMI_10X_SERVICE_SCAN_OFFLOAD, 214 WMI_10X_SERVICE_ROAM_OFFLOAD, 215 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 216 WMI_10X_SERVICE_STA_PWRSAVE, 217 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 218 WMI_10X_SERVICE_AP_UAPSD, 219 WMI_10X_SERVICE_AP_DFS, 220 WMI_10X_SERVICE_11AC, 221 WMI_10X_SERVICE_BLOCKACK, 222 WMI_10X_SERVICE_PHYERR, 223 WMI_10X_SERVICE_BCN_FILTER, 224 WMI_10X_SERVICE_RTT, 225 WMI_10X_SERVICE_RATECTRL, 226 WMI_10X_SERVICE_WOW, 227 WMI_10X_SERVICE_RATECTRL_CACHE, 228 WMI_10X_SERVICE_IRAM_TIDS, 229 WMI_10X_SERVICE_BURST, 230 231 /* introduced in 10.2 */ 232 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 233 WMI_10X_SERVICE_FORCE_FW_HANG, 234 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 235 WMI_10X_SERVICE_ATF, 236 WMI_10X_SERVICE_COEX_GPIO, 237 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 238 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 239 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 240 WMI_10X_SERVICE_MESH, 241 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 242 WMI_10X_SERVICE_PEER_STATS, 243 WMI_10X_SERVICE_RESET_CHIP, 244 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 245 }; 246 247 enum wmi_main_service { 248 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 249 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 250 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 251 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 252 WMI_MAIN_SERVICE_STA_PWRSAVE, 253 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 254 WMI_MAIN_SERVICE_AP_UAPSD, 255 WMI_MAIN_SERVICE_AP_DFS, 256 WMI_MAIN_SERVICE_11AC, 257 WMI_MAIN_SERVICE_BLOCKACK, 258 WMI_MAIN_SERVICE_PHYERR, 259 WMI_MAIN_SERVICE_BCN_FILTER, 260 WMI_MAIN_SERVICE_RTT, 261 WMI_MAIN_SERVICE_RATECTRL, 262 WMI_MAIN_SERVICE_WOW, 263 WMI_MAIN_SERVICE_RATECTRL_CACHE, 264 WMI_MAIN_SERVICE_IRAM_TIDS, 265 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 266 WMI_MAIN_SERVICE_NLO, 267 WMI_MAIN_SERVICE_GTK_OFFLOAD, 268 WMI_MAIN_SERVICE_SCAN_SCH, 269 WMI_MAIN_SERVICE_CSA_OFFLOAD, 270 WMI_MAIN_SERVICE_CHATTER, 271 WMI_MAIN_SERVICE_COEX_FREQAVOID, 272 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 273 WMI_MAIN_SERVICE_FORCE_FW_HANG, 274 WMI_MAIN_SERVICE_GPIO, 275 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 276 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 277 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 278 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 279 WMI_MAIN_SERVICE_TX_ENCAP, 280 }; 281 282 enum wmi_10_4_service { 283 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 284 WMI_10_4_SERVICE_SCAN_OFFLOAD, 285 WMI_10_4_SERVICE_ROAM_OFFLOAD, 286 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 287 WMI_10_4_SERVICE_STA_PWRSAVE, 288 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 289 WMI_10_4_SERVICE_AP_UAPSD, 290 WMI_10_4_SERVICE_AP_DFS, 291 WMI_10_4_SERVICE_11AC, 292 WMI_10_4_SERVICE_BLOCKACK, 293 WMI_10_4_SERVICE_PHYERR, 294 WMI_10_4_SERVICE_BCN_FILTER, 295 WMI_10_4_SERVICE_RTT, 296 WMI_10_4_SERVICE_RATECTRL, 297 WMI_10_4_SERVICE_WOW, 298 WMI_10_4_SERVICE_RATECTRL_CACHE, 299 WMI_10_4_SERVICE_IRAM_TIDS, 300 WMI_10_4_SERVICE_BURST, 301 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 302 WMI_10_4_SERVICE_GTK_OFFLOAD, 303 WMI_10_4_SERVICE_SCAN_SCH, 304 WMI_10_4_SERVICE_CSA_OFFLOAD, 305 WMI_10_4_SERVICE_CHATTER, 306 WMI_10_4_SERVICE_COEX_FREQAVOID, 307 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 308 WMI_10_4_SERVICE_FORCE_FW_HANG, 309 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 310 WMI_10_4_SERVICE_GPIO, 311 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 312 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 313 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 314 WMI_10_4_SERVICE_TX_ENCAP, 315 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 316 WMI_10_4_SERVICE_EARLY_RX, 317 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 318 WMI_10_4_SERVICE_TT, 319 WMI_10_4_SERVICE_ATF, 320 WMI_10_4_SERVICE_PEER_CACHING, 321 WMI_10_4_SERVICE_COEX_GPIO, 322 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 323 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 324 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 325 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 326 WMI_10_4_SERVICE_MESH_NON_11S, 327 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 328 WMI_10_4_SERVICE_PEER_STATS, 329 WMI_10_4_SERVICE_MESH_11S, 330 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 331 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 332 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 333 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 334 WMI_10_4_SERVICE_VDEV_RX_FILTER, 335 WMI_10_4_SERVICE_BTCOEX, 336 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 337 WMI_10_4_SERVICE_DBGLOG_WARN2, 338 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 339 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 340 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 341 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 342 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 343 WMI_10_4_SERVICE_TDLS, 344 WMI_10_4_SERVICE_TDLS_OFFCHAN, 345 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 346 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 347 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 348 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 349 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 350 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 351 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 352 WMI_10_4_SERVICE_TPC_STATS_FINAL, 353 }; 354 355 static inline char *wmi_service_name(int service_id) 356 { 357 #define SVCSTR(x) case x: return #x 358 359 switch (service_id) { 360 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 361 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 362 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 363 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 364 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 365 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 366 SVCSTR(WMI_SERVICE_AP_UAPSD); 367 SVCSTR(WMI_SERVICE_AP_DFS); 368 SVCSTR(WMI_SERVICE_11AC); 369 SVCSTR(WMI_SERVICE_BLOCKACK); 370 SVCSTR(WMI_SERVICE_PHYERR); 371 SVCSTR(WMI_SERVICE_BCN_FILTER); 372 SVCSTR(WMI_SERVICE_RTT); 373 SVCSTR(WMI_SERVICE_RATECTRL); 374 SVCSTR(WMI_SERVICE_WOW); 375 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 376 SVCSTR(WMI_SERVICE_IRAM_TIDS); 377 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 378 SVCSTR(WMI_SERVICE_NLO); 379 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 380 SVCSTR(WMI_SERVICE_SCAN_SCH); 381 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 382 SVCSTR(WMI_SERVICE_CHATTER); 383 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 384 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 385 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 386 SVCSTR(WMI_SERVICE_GPIO); 387 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 388 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 389 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 390 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 391 SVCSTR(WMI_SERVICE_TX_ENCAP); 392 SVCSTR(WMI_SERVICE_BURST); 393 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 394 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 395 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 396 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 397 SVCSTR(WMI_SERVICE_EARLY_RX); 398 SVCSTR(WMI_SERVICE_STA_SMPS); 399 SVCSTR(WMI_SERVICE_FWTEST); 400 SVCSTR(WMI_SERVICE_STA_WMMAC); 401 SVCSTR(WMI_SERVICE_TDLS); 402 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 403 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 404 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 405 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 406 SVCSTR(WMI_SERVICE_WLAN_HB); 407 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 408 SVCSTR(WMI_SERVICE_BATCH_SCAN); 409 SVCSTR(WMI_SERVICE_QPOWER); 410 SVCSTR(WMI_SERVICE_PLMREQ); 411 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 412 SVCSTR(WMI_SERVICE_RMC); 413 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 414 SVCSTR(WMI_SERVICE_COEX_SAR); 415 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 416 SVCSTR(WMI_SERVICE_NAN); 417 SVCSTR(WMI_SERVICE_L1SS_STAT); 418 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 419 SVCSTR(WMI_SERVICE_OBSS_SCAN); 420 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 421 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 422 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 423 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 424 SVCSTR(WMI_SERVICE_LPASS); 425 SVCSTR(WMI_SERVICE_EXTSCAN); 426 SVCSTR(WMI_SERVICE_D0WOW); 427 SVCSTR(WMI_SERVICE_HSOFFLOAD); 428 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 429 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 430 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 431 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 432 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 433 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 434 SVCSTR(WMI_SERVICE_ATF); 435 SVCSTR(WMI_SERVICE_COEX_GPIO); 436 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 437 SVCSTR(WMI_SERVICE_TT); 438 SVCSTR(WMI_SERVICE_PEER_CACHING); 439 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 440 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 441 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 442 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 443 SVCSTR(WMI_SERVICE_MESH_11S); 444 SVCSTR(WMI_SERVICE_MESH_NON_11S); 445 SVCSTR(WMI_SERVICE_PEER_STATS); 446 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 447 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 448 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 449 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 450 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 451 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 452 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 453 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 454 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 455 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 456 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 457 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 458 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 459 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 460 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 461 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 462 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); 463 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); 464 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); 465 default: 466 return NULL; 467 } 468 469 #undef SVCSTR 470 } 471 472 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 473 ((svc_id) < (len) && \ 474 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 475 BIT((svc_id) % (sizeof(u32)))) 476 477 /* This extension is required to accommodate new services, current limit 478 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 479 * wmi_service word. Extending this to make use of remaining unused bits 480 * for new services. 481 */ 482 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 483 ((svc_id) >= (len) && \ 484 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 485 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 486 487 #define SVCMAP(x, y, len) \ 488 do { \ 489 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 490 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 491 __set_bit(y, out); \ 492 } while (0) 493 494 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 495 size_t len) 496 { 497 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 498 WMI_SERVICE_BEACON_OFFLOAD, len); 499 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 500 WMI_SERVICE_SCAN_OFFLOAD, len); 501 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 502 WMI_SERVICE_ROAM_OFFLOAD, len); 503 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 504 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 505 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 506 WMI_SERVICE_STA_PWRSAVE, len); 507 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 508 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 509 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 510 WMI_SERVICE_AP_UAPSD, len); 511 SVCMAP(WMI_10X_SERVICE_AP_DFS, 512 WMI_SERVICE_AP_DFS, len); 513 SVCMAP(WMI_10X_SERVICE_11AC, 514 WMI_SERVICE_11AC, len); 515 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 516 WMI_SERVICE_BLOCKACK, len); 517 SVCMAP(WMI_10X_SERVICE_PHYERR, 518 WMI_SERVICE_PHYERR, len); 519 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 520 WMI_SERVICE_BCN_FILTER, len); 521 SVCMAP(WMI_10X_SERVICE_RTT, 522 WMI_SERVICE_RTT, len); 523 SVCMAP(WMI_10X_SERVICE_RATECTRL, 524 WMI_SERVICE_RATECTRL, len); 525 SVCMAP(WMI_10X_SERVICE_WOW, 526 WMI_SERVICE_WOW, len); 527 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 528 WMI_SERVICE_RATECTRL_CACHE, len); 529 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 530 WMI_SERVICE_IRAM_TIDS, len); 531 SVCMAP(WMI_10X_SERVICE_BURST, 532 WMI_SERVICE_BURST, len); 533 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 534 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 535 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 536 WMI_SERVICE_FORCE_FW_HANG, len); 537 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 538 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 539 SVCMAP(WMI_10X_SERVICE_ATF, 540 WMI_SERVICE_ATF, len); 541 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 542 WMI_SERVICE_COEX_GPIO, len); 543 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 544 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 545 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 546 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 547 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 548 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 549 SVCMAP(WMI_10X_SERVICE_MESH, 550 WMI_SERVICE_MESH_11S, len); 551 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 552 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 553 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 554 WMI_SERVICE_PEER_STATS, len); 555 SVCMAP(WMI_10X_SERVICE_RESET_CHIP, 556 WMI_SERVICE_RESET_CHIP, len); 557 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 558 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 559 } 560 561 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 562 size_t len) 563 { 564 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 565 WMI_SERVICE_BEACON_OFFLOAD, len); 566 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 567 WMI_SERVICE_SCAN_OFFLOAD, len); 568 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 569 WMI_SERVICE_ROAM_OFFLOAD, len); 570 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 571 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 572 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 573 WMI_SERVICE_STA_PWRSAVE, len); 574 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 575 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 576 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 577 WMI_SERVICE_AP_UAPSD, len); 578 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 579 WMI_SERVICE_AP_DFS, len); 580 SVCMAP(WMI_MAIN_SERVICE_11AC, 581 WMI_SERVICE_11AC, len); 582 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 583 WMI_SERVICE_BLOCKACK, len); 584 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 585 WMI_SERVICE_PHYERR, len); 586 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 587 WMI_SERVICE_BCN_FILTER, len); 588 SVCMAP(WMI_MAIN_SERVICE_RTT, 589 WMI_SERVICE_RTT, len); 590 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 591 WMI_SERVICE_RATECTRL, len); 592 SVCMAP(WMI_MAIN_SERVICE_WOW, 593 WMI_SERVICE_WOW, len); 594 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 595 WMI_SERVICE_RATECTRL_CACHE, len); 596 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 597 WMI_SERVICE_IRAM_TIDS, len); 598 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 599 WMI_SERVICE_ARPNS_OFFLOAD, len); 600 SVCMAP(WMI_MAIN_SERVICE_NLO, 601 WMI_SERVICE_NLO, len); 602 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 603 WMI_SERVICE_GTK_OFFLOAD, len); 604 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 605 WMI_SERVICE_SCAN_SCH, len); 606 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 607 WMI_SERVICE_CSA_OFFLOAD, len); 608 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 609 WMI_SERVICE_CHATTER, len); 610 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 611 WMI_SERVICE_COEX_FREQAVOID, len); 612 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 613 WMI_SERVICE_PACKET_POWER_SAVE, len); 614 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 615 WMI_SERVICE_FORCE_FW_HANG, len); 616 SVCMAP(WMI_MAIN_SERVICE_GPIO, 617 WMI_SERVICE_GPIO, len); 618 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 619 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 620 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 621 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 622 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 623 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 624 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 625 WMI_SERVICE_STA_KEEP_ALIVE, len); 626 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 627 WMI_SERVICE_TX_ENCAP, len); 628 } 629 630 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 631 size_t len) 632 { 633 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 634 WMI_SERVICE_BEACON_OFFLOAD, len); 635 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 636 WMI_SERVICE_SCAN_OFFLOAD, len); 637 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 638 WMI_SERVICE_ROAM_OFFLOAD, len); 639 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 640 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 641 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 642 WMI_SERVICE_STA_PWRSAVE, len); 643 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 644 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 645 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 646 WMI_SERVICE_AP_UAPSD, len); 647 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 648 WMI_SERVICE_AP_DFS, len); 649 SVCMAP(WMI_10_4_SERVICE_11AC, 650 WMI_SERVICE_11AC, len); 651 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 652 WMI_SERVICE_BLOCKACK, len); 653 SVCMAP(WMI_10_4_SERVICE_PHYERR, 654 WMI_SERVICE_PHYERR, len); 655 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 656 WMI_SERVICE_BCN_FILTER, len); 657 SVCMAP(WMI_10_4_SERVICE_RTT, 658 WMI_SERVICE_RTT, len); 659 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 660 WMI_SERVICE_RATECTRL, len); 661 SVCMAP(WMI_10_4_SERVICE_WOW, 662 WMI_SERVICE_WOW, len); 663 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 664 WMI_SERVICE_RATECTRL_CACHE, len); 665 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 666 WMI_SERVICE_IRAM_TIDS, len); 667 SVCMAP(WMI_10_4_SERVICE_BURST, 668 WMI_SERVICE_BURST, len); 669 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 670 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 671 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 672 WMI_SERVICE_GTK_OFFLOAD, len); 673 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 674 WMI_SERVICE_SCAN_SCH, len); 675 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 676 WMI_SERVICE_CSA_OFFLOAD, len); 677 SVCMAP(WMI_10_4_SERVICE_CHATTER, 678 WMI_SERVICE_CHATTER, len); 679 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 680 WMI_SERVICE_COEX_FREQAVOID, len); 681 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 682 WMI_SERVICE_PACKET_POWER_SAVE, len); 683 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 684 WMI_SERVICE_FORCE_FW_HANG, len); 685 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 686 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 687 SVCMAP(WMI_10_4_SERVICE_GPIO, 688 WMI_SERVICE_GPIO, len); 689 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 690 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 691 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 692 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 693 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 694 WMI_SERVICE_STA_KEEP_ALIVE, len); 695 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 696 WMI_SERVICE_TX_ENCAP, len); 697 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 698 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 699 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 700 WMI_SERVICE_EARLY_RX, len); 701 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 702 WMI_SERVICE_ENHANCED_PROXY_STA, len); 703 SVCMAP(WMI_10_4_SERVICE_TT, 704 WMI_SERVICE_TT, len); 705 SVCMAP(WMI_10_4_SERVICE_ATF, 706 WMI_SERVICE_ATF, len); 707 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 708 WMI_SERVICE_PEER_CACHING, len); 709 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 710 WMI_SERVICE_COEX_GPIO, len); 711 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 712 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 713 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 714 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 715 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 716 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 717 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 718 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 719 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 720 WMI_SERVICE_MESH_NON_11S, len); 721 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 722 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 723 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 724 WMI_SERVICE_PEER_STATS, len); 725 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 726 WMI_SERVICE_MESH_11S, len); 727 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 728 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 729 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 730 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 731 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 732 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 733 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 734 WMI_SERVICE_TX_MODE_DYNAMIC, len); 735 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 736 WMI_SERVICE_VDEV_RX_FILTER, len); 737 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 738 WMI_SERVICE_BTCOEX, len); 739 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 740 WMI_SERVICE_CHECK_CAL_VERSION, len); 741 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 742 WMI_SERVICE_DBGLOG_WARN2, len); 743 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 744 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 745 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 746 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 747 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 748 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 749 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 750 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 751 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 752 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 753 SVCMAP(WMI_10_4_SERVICE_TDLS, 754 WMI_SERVICE_TDLS, len); 755 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 756 WMI_SERVICE_TDLS_OFFCHAN, len); 757 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 758 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 759 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 760 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 761 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 762 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 763 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 764 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 765 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 766 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 767 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 768 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 769 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 770 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); 771 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, 772 WMI_SERVICE_TPC_STATS_FINAL, len); 773 } 774 775 #undef SVCMAP 776 777 /* 2 word representation of MAC addr */ 778 struct wmi_mac_addr { 779 union { 780 u8 addr[6]; 781 struct { 782 u32 word0; 783 u32 word1; 784 } __packed; 785 } __packed; 786 } __packed; 787 788 struct wmi_cmd_map { 789 u32 init_cmdid; 790 u32 start_scan_cmdid; 791 u32 stop_scan_cmdid; 792 u32 scan_chan_list_cmdid; 793 u32 scan_sch_prio_tbl_cmdid; 794 u32 scan_prob_req_oui_cmdid; 795 u32 pdev_set_regdomain_cmdid; 796 u32 pdev_set_channel_cmdid; 797 u32 pdev_set_param_cmdid; 798 u32 pdev_pktlog_enable_cmdid; 799 u32 pdev_pktlog_disable_cmdid; 800 u32 pdev_set_wmm_params_cmdid; 801 u32 pdev_set_ht_cap_ie_cmdid; 802 u32 pdev_set_vht_cap_ie_cmdid; 803 u32 pdev_set_dscp_tid_map_cmdid; 804 u32 pdev_set_quiet_mode_cmdid; 805 u32 pdev_green_ap_ps_enable_cmdid; 806 u32 pdev_get_tpc_config_cmdid; 807 u32 pdev_set_base_macaddr_cmdid; 808 u32 vdev_create_cmdid; 809 u32 vdev_delete_cmdid; 810 u32 vdev_start_request_cmdid; 811 u32 vdev_restart_request_cmdid; 812 u32 vdev_up_cmdid; 813 u32 vdev_stop_cmdid; 814 u32 vdev_down_cmdid; 815 u32 vdev_set_param_cmdid; 816 u32 vdev_install_key_cmdid; 817 u32 peer_create_cmdid; 818 u32 peer_delete_cmdid; 819 u32 peer_flush_tids_cmdid; 820 u32 peer_set_param_cmdid; 821 u32 peer_assoc_cmdid; 822 u32 peer_add_wds_entry_cmdid; 823 u32 peer_remove_wds_entry_cmdid; 824 u32 peer_mcast_group_cmdid; 825 u32 bcn_tx_cmdid; 826 u32 pdev_send_bcn_cmdid; 827 u32 bcn_tmpl_cmdid; 828 u32 bcn_filter_rx_cmdid; 829 u32 prb_req_filter_rx_cmdid; 830 u32 mgmt_tx_cmdid; 831 u32 mgmt_tx_send_cmdid; 832 u32 prb_tmpl_cmdid; 833 u32 addba_clear_resp_cmdid; 834 u32 addba_send_cmdid; 835 u32 addba_status_cmdid; 836 u32 delba_send_cmdid; 837 u32 addba_set_resp_cmdid; 838 u32 send_singleamsdu_cmdid; 839 u32 sta_powersave_mode_cmdid; 840 u32 sta_powersave_param_cmdid; 841 u32 sta_mimo_ps_mode_cmdid; 842 u32 pdev_dfs_enable_cmdid; 843 u32 pdev_dfs_disable_cmdid; 844 u32 roam_scan_mode; 845 u32 roam_scan_rssi_threshold; 846 u32 roam_scan_period; 847 u32 roam_scan_rssi_change_threshold; 848 u32 roam_ap_profile; 849 u32 ofl_scan_add_ap_profile; 850 u32 ofl_scan_remove_ap_profile; 851 u32 ofl_scan_period; 852 u32 p2p_dev_set_device_info; 853 u32 p2p_dev_set_discoverability; 854 u32 p2p_go_set_beacon_ie; 855 u32 p2p_go_set_probe_resp_ie; 856 u32 p2p_set_vendor_ie_data_cmdid; 857 u32 ap_ps_peer_param_cmdid; 858 u32 ap_ps_peer_uapsd_coex_cmdid; 859 u32 peer_rate_retry_sched_cmdid; 860 u32 wlan_profile_trigger_cmdid; 861 u32 wlan_profile_set_hist_intvl_cmdid; 862 u32 wlan_profile_get_profile_data_cmdid; 863 u32 wlan_profile_enable_profile_id_cmdid; 864 u32 wlan_profile_list_profile_id_cmdid; 865 u32 pdev_suspend_cmdid; 866 u32 pdev_resume_cmdid; 867 u32 add_bcn_filter_cmdid; 868 u32 rmv_bcn_filter_cmdid; 869 u32 wow_add_wake_pattern_cmdid; 870 u32 wow_del_wake_pattern_cmdid; 871 u32 wow_enable_disable_wake_event_cmdid; 872 u32 wow_enable_cmdid; 873 u32 wow_hostwakeup_from_sleep_cmdid; 874 u32 rtt_measreq_cmdid; 875 u32 rtt_tsf_cmdid; 876 u32 vdev_spectral_scan_configure_cmdid; 877 u32 vdev_spectral_scan_enable_cmdid; 878 u32 request_stats_cmdid; 879 u32 set_arp_ns_offload_cmdid; 880 u32 network_list_offload_config_cmdid; 881 u32 gtk_offload_cmdid; 882 u32 csa_offload_enable_cmdid; 883 u32 csa_offload_chanswitch_cmdid; 884 u32 chatter_set_mode_cmdid; 885 u32 peer_tid_addba_cmdid; 886 u32 peer_tid_delba_cmdid; 887 u32 sta_dtim_ps_method_cmdid; 888 u32 sta_uapsd_auto_trig_cmdid; 889 u32 sta_keepalive_cmd; 890 u32 echo_cmdid; 891 u32 pdev_utf_cmdid; 892 u32 dbglog_cfg_cmdid; 893 u32 pdev_qvit_cmdid; 894 u32 pdev_ftm_intg_cmdid; 895 u32 vdev_set_keepalive_cmdid; 896 u32 vdev_get_keepalive_cmdid; 897 u32 force_fw_hang_cmdid; 898 u32 gpio_config_cmdid; 899 u32 gpio_output_cmdid; 900 u32 pdev_get_temperature_cmdid; 901 u32 vdev_set_wmm_params_cmdid; 902 u32 tdls_set_state_cmdid; 903 u32 tdls_peer_update_cmdid; 904 u32 adaptive_qcs_cmdid; 905 u32 scan_update_request_cmdid; 906 u32 vdev_standby_response_cmdid; 907 u32 vdev_resume_response_cmdid; 908 u32 wlan_peer_caching_add_peer_cmdid; 909 u32 wlan_peer_caching_evict_peer_cmdid; 910 u32 wlan_peer_caching_restore_peer_cmdid; 911 u32 wlan_peer_caching_print_all_peers_info_cmdid; 912 u32 peer_update_wds_entry_cmdid; 913 u32 peer_add_proxy_sta_entry_cmdid; 914 u32 rtt_keepalive_cmdid; 915 u32 oem_req_cmdid; 916 u32 nan_cmdid; 917 u32 vdev_ratemask_cmdid; 918 u32 qboost_cfg_cmdid; 919 u32 pdev_smart_ant_enable_cmdid; 920 u32 pdev_smart_ant_set_rx_antenna_cmdid; 921 u32 peer_smart_ant_set_tx_antenna_cmdid; 922 u32 peer_smart_ant_set_train_info_cmdid; 923 u32 peer_smart_ant_set_node_config_ops_cmdid; 924 u32 pdev_set_antenna_switch_table_cmdid; 925 u32 pdev_set_ctl_table_cmdid; 926 u32 pdev_set_mimogain_table_cmdid; 927 u32 pdev_ratepwr_table_cmdid; 928 u32 pdev_ratepwr_chainmsk_table_cmdid; 929 u32 pdev_fips_cmdid; 930 u32 tt_set_conf_cmdid; 931 u32 fwtest_cmdid; 932 u32 vdev_atf_request_cmdid; 933 u32 peer_atf_request_cmdid; 934 u32 pdev_get_ani_cck_config_cmdid; 935 u32 pdev_get_ani_ofdm_config_cmdid; 936 u32 pdev_reserve_ast_entry_cmdid; 937 u32 pdev_get_nfcal_power_cmdid; 938 u32 pdev_get_tpc_cmdid; 939 u32 pdev_get_ast_info_cmdid; 940 u32 vdev_set_dscp_tid_map_cmdid; 941 u32 pdev_get_info_cmdid; 942 u32 vdev_get_info_cmdid; 943 u32 vdev_filter_neighbor_rx_packets_cmdid; 944 u32 mu_cal_start_cmdid; 945 u32 set_cca_params_cmdid; 946 u32 pdev_bss_chan_info_request_cmdid; 947 u32 pdev_enable_adaptive_cca_cmdid; 948 u32 ext_resource_cfg_cmdid; 949 u32 vdev_set_ie_cmdid; 950 u32 set_lteu_config_cmdid; 951 u32 atf_ssid_grouping_request_cmdid; 952 u32 peer_atf_ext_request_cmdid; 953 u32 set_periodic_channel_stats_cfg_cmdid; 954 u32 peer_bwf_request_cmdid; 955 u32 btcoex_cfg_cmdid; 956 u32 peer_tx_mu_txmit_count_cmdid; 957 u32 peer_tx_mu_txmit_rstcnt_cmdid; 958 u32 peer_gid_userpos_list_cmdid; 959 u32 pdev_check_cal_version_cmdid; 960 u32 coex_version_cfg_cmid; 961 u32 pdev_get_rx_filter_cmdid; 962 u32 pdev_extended_nss_cfg_cmdid; 963 u32 vdev_set_scan_nac_rssi_cmdid; 964 u32 prog_gpio_band_select_cmdid; 965 u32 config_smart_logging_cmdid; 966 u32 debug_fatal_condition_cmdid; 967 u32 get_tsf_timer_cmdid; 968 u32 pdev_get_tpc_table_cmdid; 969 u32 vdev_sifs_trigger_time_cmdid; 970 u32 pdev_wds_entry_list_cmdid; 971 u32 tdls_set_offchan_mode_cmdid; 972 u32 radar_found_cmdid; 973 }; 974 975 /* 976 * wmi command groups. 977 */ 978 enum wmi_cmd_group { 979 /* 0 to 2 are reserved */ 980 WMI_GRP_START = 0x3, 981 WMI_GRP_SCAN = WMI_GRP_START, 982 WMI_GRP_PDEV, 983 WMI_GRP_VDEV, 984 WMI_GRP_PEER, 985 WMI_GRP_MGMT, 986 WMI_GRP_BA_NEG, 987 WMI_GRP_STA_PS, 988 WMI_GRP_DFS, 989 WMI_GRP_ROAM, 990 WMI_GRP_OFL_SCAN, 991 WMI_GRP_P2P, 992 WMI_GRP_AP_PS, 993 WMI_GRP_RATE_CTRL, 994 WMI_GRP_PROFILE, 995 WMI_GRP_SUSPEND, 996 WMI_GRP_BCN_FILTER, 997 WMI_GRP_WOW, 998 WMI_GRP_RTT, 999 WMI_GRP_SPECTRAL, 1000 WMI_GRP_STATS, 1001 WMI_GRP_ARP_NS_OFL, 1002 WMI_GRP_NLO_OFL, 1003 WMI_GRP_GTK_OFL, 1004 WMI_GRP_CSA_OFL, 1005 WMI_GRP_CHATTER, 1006 WMI_GRP_TID_ADDBA, 1007 WMI_GRP_MISC, 1008 WMI_GRP_GPIO, 1009 }; 1010 1011 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 1012 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 1013 1014 #define WMI_CMD_UNSUPPORTED 0 1015 1016 /* Command IDs and command events for MAIN FW. */ 1017 enum wmi_cmd_id { 1018 WMI_INIT_CMDID = 0x1, 1019 1020 /* Scan specific commands */ 1021 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 1022 WMI_STOP_SCAN_CMDID, 1023 WMI_SCAN_CHAN_LIST_CMDID, 1024 WMI_SCAN_SCH_PRIO_TBL_CMDID, 1025 1026 /* PDEV (physical device) specific commands */ 1027 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1028 WMI_PDEV_SET_CHANNEL_CMDID, 1029 WMI_PDEV_SET_PARAM_CMDID, 1030 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1031 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1032 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1033 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1034 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1035 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1036 WMI_PDEV_SET_QUIET_MODE_CMDID, 1037 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1038 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1039 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1040 1041 /* VDEV (virtual device) specific commands */ 1042 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1043 WMI_VDEV_DELETE_CMDID, 1044 WMI_VDEV_START_REQUEST_CMDID, 1045 WMI_VDEV_RESTART_REQUEST_CMDID, 1046 WMI_VDEV_UP_CMDID, 1047 WMI_VDEV_STOP_CMDID, 1048 WMI_VDEV_DOWN_CMDID, 1049 WMI_VDEV_SET_PARAM_CMDID, 1050 WMI_VDEV_INSTALL_KEY_CMDID, 1051 1052 /* peer specific commands */ 1053 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1054 WMI_PEER_DELETE_CMDID, 1055 WMI_PEER_FLUSH_TIDS_CMDID, 1056 WMI_PEER_SET_PARAM_CMDID, 1057 WMI_PEER_ASSOC_CMDID, 1058 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1059 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1060 WMI_PEER_MCAST_GROUP_CMDID, 1061 1062 /* beacon/management specific commands */ 1063 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1064 WMI_PDEV_SEND_BCN_CMDID, 1065 WMI_BCN_TMPL_CMDID, 1066 WMI_BCN_FILTER_RX_CMDID, 1067 WMI_PRB_REQ_FILTER_RX_CMDID, 1068 WMI_MGMT_TX_CMDID, 1069 WMI_PRB_TMPL_CMDID, 1070 1071 /* commands to directly control BA negotiation directly from host. */ 1072 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1073 WMI_ADDBA_SEND_CMDID, 1074 WMI_ADDBA_STATUS_CMDID, 1075 WMI_DELBA_SEND_CMDID, 1076 WMI_ADDBA_SET_RESP_CMDID, 1077 WMI_SEND_SINGLEAMSDU_CMDID, 1078 1079 /* Station power save specific config */ 1080 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1081 WMI_STA_POWERSAVE_PARAM_CMDID, 1082 WMI_STA_MIMO_PS_MODE_CMDID, 1083 1084 /** DFS-specific commands */ 1085 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1086 WMI_PDEV_DFS_DISABLE_CMDID, 1087 1088 /* Roaming specific commands */ 1089 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1090 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1091 WMI_ROAM_SCAN_PERIOD, 1092 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1093 WMI_ROAM_AP_PROFILE, 1094 1095 /* offload scan specific commands */ 1096 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1097 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1098 WMI_OFL_SCAN_PERIOD, 1099 1100 /* P2P specific commands */ 1101 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1102 WMI_P2P_DEV_SET_DISCOVERABILITY, 1103 WMI_P2P_GO_SET_BEACON_IE, 1104 WMI_P2P_GO_SET_PROBE_RESP_IE, 1105 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1106 1107 /* AP power save specific config */ 1108 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1109 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1110 1111 /* Rate-control specific commands */ 1112 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1113 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1114 1115 /* WLAN Profiling commands. */ 1116 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1117 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1118 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1119 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1120 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1121 1122 /* Suspend resume command Ids */ 1123 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1124 WMI_PDEV_RESUME_CMDID, 1125 1126 /* Beacon filter commands */ 1127 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1128 WMI_RMV_BCN_FILTER_CMDID, 1129 1130 /* WOW Specific WMI commands*/ 1131 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1132 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1133 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1134 WMI_WOW_ENABLE_CMDID, 1135 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1136 1137 /* RTT measurement related cmd */ 1138 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1139 WMI_RTT_TSF_CMDID, 1140 1141 /* spectral scan commands */ 1142 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1143 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1144 1145 /* F/W stats */ 1146 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1147 1148 /* ARP OFFLOAD REQUEST*/ 1149 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1150 1151 /* NS offload confid*/ 1152 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1153 1154 /* GTK offload Specific WMI commands*/ 1155 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1156 1157 /* CSA offload Specific WMI commands*/ 1158 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1159 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1160 1161 /* Chatter commands*/ 1162 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1163 1164 /* addba specific commands */ 1165 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1166 WMI_PEER_TID_DELBA_CMDID, 1167 1168 /* set station mimo powersave method */ 1169 WMI_STA_DTIM_PS_METHOD_CMDID, 1170 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1171 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1172 1173 /* STA Keep alive parameter configuration, 1174 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1175 */ 1176 WMI_STA_KEEPALIVE_CMD, 1177 1178 /* misc command group */ 1179 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1180 WMI_PDEV_UTF_CMDID, 1181 WMI_DBGLOG_CFG_CMDID, 1182 WMI_PDEV_QVIT_CMDID, 1183 WMI_PDEV_FTM_INTG_CMDID, 1184 WMI_VDEV_SET_KEEPALIVE_CMDID, 1185 WMI_VDEV_GET_KEEPALIVE_CMDID, 1186 WMI_FORCE_FW_HANG_CMDID, 1187 1188 /* GPIO Configuration */ 1189 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1190 WMI_GPIO_OUTPUT_CMDID, 1191 }; 1192 1193 enum wmi_event_id { 1194 WMI_SERVICE_READY_EVENTID = 0x1, 1195 WMI_READY_EVENTID, 1196 WMI_SERVICE_AVAILABLE_EVENTID, 1197 1198 /* Scan specific events */ 1199 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1200 1201 /* PDEV specific events */ 1202 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1203 WMI_CHAN_INFO_EVENTID, 1204 WMI_PHYERR_EVENTID, 1205 1206 /* VDEV specific events */ 1207 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1208 WMI_VDEV_STOPPED_EVENTID, 1209 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1210 1211 /* peer specific events */ 1212 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1213 1214 /* beacon/mgmt specific events */ 1215 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1216 WMI_HOST_SWBA_EVENTID, 1217 WMI_TBTTOFFSET_UPDATE_EVENTID, 1218 1219 /* ADDBA Related WMI Events*/ 1220 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1221 WMI_TX_ADDBA_COMPLETE_EVENTID, 1222 1223 /* Roam event to trigger roaming on host */ 1224 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1225 WMI_PROFILE_MATCH, 1226 1227 /* WoW */ 1228 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1229 1230 /* RTT */ 1231 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1232 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1233 WMI_RTT_ERROR_REPORT_EVENTID, 1234 1235 /* GTK offload */ 1236 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1237 WMI_GTK_REKEY_FAIL_EVENTID, 1238 1239 /* CSA IE received event */ 1240 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1241 1242 /* Misc events */ 1243 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1244 WMI_PDEV_UTF_EVENTID, 1245 WMI_DEBUG_MESG_EVENTID, 1246 WMI_UPDATE_STATS_EVENTID, 1247 WMI_DEBUG_PRINT_EVENTID, 1248 WMI_DCS_INTERFERENCE_EVENTID, 1249 WMI_PDEV_QVIT_EVENTID, 1250 WMI_WLAN_PROFILE_DATA_EVENTID, 1251 WMI_PDEV_FTM_INTG_EVENTID, 1252 WMI_WLAN_FREQ_AVOID_EVENTID, 1253 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1254 1255 /* GPIO Event */ 1256 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1257 }; 1258 1259 /* Command IDs and command events for 10.X firmware */ 1260 enum wmi_10x_cmd_id { 1261 WMI_10X_START_CMDID = 0x9000, 1262 WMI_10X_END_CMDID = 0x9FFF, 1263 1264 /* initialize the wlan sub system */ 1265 WMI_10X_INIT_CMDID, 1266 1267 /* Scan specific commands */ 1268 1269 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1270 WMI_10X_STOP_SCAN_CMDID, 1271 WMI_10X_SCAN_CHAN_LIST_CMDID, 1272 WMI_10X_ECHO_CMDID, 1273 1274 /* PDEV(physical device) specific commands */ 1275 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1276 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1277 WMI_10X_PDEV_SET_PARAM_CMDID, 1278 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1279 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1280 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1281 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1282 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1283 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1284 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1285 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1286 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1287 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1288 1289 /* VDEV(virtual device) specific commands */ 1290 WMI_10X_VDEV_CREATE_CMDID, 1291 WMI_10X_VDEV_DELETE_CMDID, 1292 WMI_10X_VDEV_START_REQUEST_CMDID, 1293 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1294 WMI_10X_VDEV_UP_CMDID, 1295 WMI_10X_VDEV_STOP_CMDID, 1296 WMI_10X_VDEV_DOWN_CMDID, 1297 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1298 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1299 WMI_10X_VDEV_SET_PARAM_CMDID, 1300 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1301 1302 /* peer specific commands */ 1303 WMI_10X_PEER_CREATE_CMDID, 1304 WMI_10X_PEER_DELETE_CMDID, 1305 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1306 WMI_10X_PEER_SET_PARAM_CMDID, 1307 WMI_10X_PEER_ASSOC_CMDID, 1308 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1309 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1310 WMI_10X_PEER_MCAST_GROUP_CMDID, 1311 1312 /* beacon/management specific commands */ 1313 1314 WMI_10X_BCN_TX_CMDID, 1315 WMI_10X_BCN_PRB_TMPL_CMDID, 1316 WMI_10X_BCN_FILTER_RX_CMDID, 1317 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1318 WMI_10X_MGMT_TX_CMDID, 1319 1320 /* commands to directly control ba negotiation directly from host. */ 1321 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1322 WMI_10X_ADDBA_SEND_CMDID, 1323 WMI_10X_ADDBA_STATUS_CMDID, 1324 WMI_10X_DELBA_SEND_CMDID, 1325 WMI_10X_ADDBA_SET_RESP_CMDID, 1326 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1327 1328 /* Station power save specific config */ 1329 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1330 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1331 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1332 1333 /* set debug log config */ 1334 WMI_10X_DBGLOG_CFG_CMDID, 1335 1336 /* DFS-specific commands */ 1337 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1338 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1339 1340 /* QVIT specific command id */ 1341 WMI_10X_PDEV_QVIT_CMDID, 1342 1343 /* Offload Scan and Roaming related commands */ 1344 WMI_10X_ROAM_SCAN_MODE, 1345 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1346 WMI_10X_ROAM_SCAN_PERIOD, 1347 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1348 WMI_10X_ROAM_AP_PROFILE, 1349 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1350 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1351 WMI_10X_OFL_SCAN_PERIOD, 1352 1353 /* P2P specific commands */ 1354 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1355 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1356 WMI_10X_P2P_GO_SET_BEACON_IE, 1357 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1358 1359 /* AP power save specific config */ 1360 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1361 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1362 1363 /* Rate-control specific commands */ 1364 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1365 1366 /* WLAN Profiling commands. */ 1367 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1368 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1369 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1370 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1371 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1372 1373 /* Suspend resume command Ids */ 1374 WMI_10X_PDEV_SUSPEND_CMDID, 1375 WMI_10X_PDEV_RESUME_CMDID, 1376 1377 /* Beacon filter commands */ 1378 WMI_10X_ADD_BCN_FILTER_CMDID, 1379 WMI_10X_RMV_BCN_FILTER_CMDID, 1380 1381 /* WOW Specific WMI commands*/ 1382 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1383 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1384 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1385 WMI_10X_WOW_ENABLE_CMDID, 1386 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1387 1388 /* RTT measurement related cmd */ 1389 WMI_10X_RTT_MEASREQ_CMDID, 1390 WMI_10X_RTT_TSF_CMDID, 1391 1392 /* transmit beacon by value */ 1393 WMI_10X_PDEV_SEND_BCN_CMDID, 1394 1395 /* F/W stats */ 1396 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1397 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1398 WMI_10X_REQUEST_STATS_CMDID, 1399 1400 /* GPIO Configuration */ 1401 WMI_10X_GPIO_CONFIG_CMDID, 1402 WMI_10X_GPIO_OUTPUT_CMDID, 1403 1404 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1405 }; 1406 1407 enum wmi_10x_event_id { 1408 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1409 WMI_10X_READY_EVENTID, 1410 WMI_10X_START_EVENTID = 0x9000, 1411 WMI_10X_END_EVENTID = 0x9FFF, 1412 1413 /* Scan specific events */ 1414 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1415 WMI_10X_ECHO_EVENTID, 1416 WMI_10X_DEBUG_MESG_EVENTID, 1417 WMI_10X_UPDATE_STATS_EVENTID, 1418 1419 /* Instantaneous RSSI event */ 1420 WMI_10X_INST_RSSI_STATS_EVENTID, 1421 1422 /* VDEV specific events */ 1423 WMI_10X_VDEV_START_RESP_EVENTID, 1424 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1425 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1426 WMI_10X_VDEV_STOPPED_EVENTID, 1427 1428 /* peer specific events */ 1429 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1430 1431 /* beacon/mgmt specific events */ 1432 WMI_10X_HOST_SWBA_EVENTID, 1433 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1434 WMI_10X_MGMT_RX_EVENTID, 1435 1436 /* Channel stats event */ 1437 WMI_10X_CHAN_INFO_EVENTID, 1438 1439 /* PHY Error specific WMI event */ 1440 WMI_10X_PHYERR_EVENTID, 1441 1442 /* Roam event to trigger roaming on host */ 1443 WMI_10X_ROAM_EVENTID, 1444 1445 /* matching AP found from list of profiles */ 1446 WMI_10X_PROFILE_MATCH, 1447 1448 /* debug print message used for tracing FW code while debugging */ 1449 WMI_10X_DEBUG_PRINT_EVENTID, 1450 /* VI spoecific event */ 1451 WMI_10X_PDEV_QVIT_EVENTID, 1452 /* FW code profile data in response to profile request */ 1453 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1454 1455 /*RTT related event ID*/ 1456 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1457 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1458 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1459 1460 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1461 WMI_10X_DCS_INTERFERENCE_EVENTID, 1462 1463 /* TPC config for the current operating channel */ 1464 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1465 1466 WMI_10X_GPIO_INPUT_EVENTID, 1467 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1468 }; 1469 1470 enum wmi_10_2_cmd_id { 1471 WMI_10_2_START_CMDID = 0x9000, 1472 WMI_10_2_END_CMDID = 0x9FFF, 1473 WMI_10_2_INIT_CMDID, 1474 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1475 WMI_10_2_STOP_SCAN_CMDID, 1476 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1477 WMI_10_2_ECHO_CMDID, 1478 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1479 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1480 WMI_10_2_PDEV_SET_PARAM_CMDID, 1481 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1482 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1483 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1484 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1485 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1486 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1487 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1488 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1489 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1490 WMI_10_2_VDEV_CREATE_CMDID, 1491 WMI_10_2_VDEV_DELETE_CMDID, 1492 WMI_10_2_VDEV_START_REQUEST_CMDID, 1493 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1494 WMI_10_2_VDEV_UP_CMDID, 1495 WMI_10_2_VDEV_STOP_CMDID, 1496 WMI_10_2_VDEV_DOWN_CMDID, 1497 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1498 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1499 WMI_10_2_VDEV_SET_PARAM_CMDID, 1500 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1501 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1502 WMI_10_2_PEER_CREATE_CMDID, 1503 WMI_10_2_PEER_DELETE_CMDID, 1504 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1505 WMI_10_2_PEER_SET_PARAM_CMDID, 1506 WMI_10_2_PEER_ASSOC_CMDID, 1507 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1508 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1509 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1510 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1511 WMI_10_2_BCN_TX_CMDID, 1512 WMI_10_2_BCN_PRB_TMPL_CMDID, 1513 WMI_10_2_BCN_FILTER_RX_CMDID, 1514 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1515 WMI_10_2_MGMT_TX_CMDID, 1516 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1517 WMI_10_2_ADDBA_SEND_CMDID, 1518 WMI_10_2_ADDBA_STATUS_CMDID, 1519 WMI_10_2_DELBA_SEND_CMDID, 1520 WMI_10_2_ADDBA_SET_RESP_CMDID, 1521 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1522 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1523 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1524 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1525 WMI_10_2_DBGLOG_CFG_CMDID, 1526 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1527 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1528 WMI_10_2_PDEV_QVIT_CMDID, 1529 WMI_10_2_ROAM_SCAN_MODE, 1530 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1531 WMI_10_2_ROAM_SCAN_PERIOD, 1532 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1533 WMI_10_2_ROAM_AP_PROFILE, 1534 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1535 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1536 WMI_10_2_OFL_SCAN_PERIOD, 1537 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1538 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1539 WMI_10_2_P2P_GO_SET_BEACON_IE, 1540 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1541 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1542 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1543 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1544 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1545 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1546 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1547 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1548 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1549 WMI_10_2_PDEV_SUSPEND_CMDID, 1550 WMI_10_2_PDEV_RESUME_CMDID, 1551 WMI_10_2_ADD_BCN_FILTER_CMDID, 1552 WMI_10_2_RMV_BCN_FILTER_CMDID, 1553 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1554 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1555 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1556 WMI_10_2_WOW_ENABLE_CMDID, 1557 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1558 WMI_10_2_RTT_MEASREQ_CMDID, 1559 WMI_10_2_RTT_TSF_CMDID, 1560 WMI_10_2_RTT_KEEPALIVE_CMDID, 1561 WMI_10_2_PDEV_SEND_BCN_CMDID, 1562 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1563 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1564 WMI_10_2_REQUEST_STATS_CMDID, 1565 WMI_10_2_GPIO_CONFIG_CMDID, 1566 WMI_10_2_GPIO_OUTPUT_CMDID, 1567 WMI_10_2_VDEV_RATEMASK_CMDID, 1568 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1569 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1570 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1571 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1572 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1573 WMI_10_2_FORCE_FW_HANG_CMDID, 1574 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1575 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1576 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1577 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1578 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1579 WMI_10_2_PDEV_GET_INFO, 1580 WMI_10_2_VDEV_GET_INFO, 1581 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1582 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1583 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1584 WMI_10_2_MU_CAL_START_CMDID, 1585 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1586 WMI_10_2_SET_CCA_PARAMS, 1587 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1588 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1589 }; 1590 1591 enum wmi_10_2_event_id { 1592 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1593 WMI_10_2_READY_EVENTID, 1594 WMI_10_2_DEBUG_MESG_EVENTID, 1595 WMI_10_2_START_EVENTID = 0x9000, 1596 WMI_10_2_END_EVENTID = 0x9FFF, 1597 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1598 WMI_10_2_ECHO_EVENTID, 1599 WMI_10_2_UPDATE_STATS_EVENTID, 1600 WMI_10_2_INST_RSSI_STATS_EVENTID, 1601 WMI_10_2_VDEV_START_RESP_EVENTID, 1602 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1603 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1604 WMI_10_2_VDEV_STOPPED_EVENTID, 1605 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1606 WMI_10_2_HOST_SWBA_EVENTID, 1607 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1608 WMI_10_2_MGMT_RX_EVENTID, 1609 WMI_10_2_CHAN_INFO_EVENTID, 1610 WMI_10_2_PHYERR_EVENTID, 1611 WMI_10_2_ROAM_EVENTID, 1612 WMI_10_2_PROFILE_MATCH, 1613 WMI_10_2_DEBUG_PRINT_EVENTID, 1614 WMI_10_2_PDEV_QVIT_EVENTID, 1615 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1616 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1617 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1618 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1619 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1620 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1621 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1622 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1623 WMI_10_2_GPIO_INPUT_EVENTID, 1624 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1625 WMI_10_2_GENERIC_BUFFER_EVENTID, 1626 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1627 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1628 WMI_10_2_WDS_PEER_EVENTID, 1629 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1630 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1631 WMI_10_2_MU_REPORT_EVENTID, 1632 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1633 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1634 }; 1635 1636 enum wmi_10_4_cmd_id { 1637 WMI_10_4_START_CMDID = 0x9000, 1638 WMI_10_4_END_CMDID = 0x9FFF, 1639 WMI_10_4_INIT_CMDID, 1640 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1641 WMI_10_4_STOP_SCAN_CMDID, 1642 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1643 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1644 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1645 WMI_10_4_ECHO_CMDID, 1646 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1647 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1648 WMI_10_4_PDEV_SET_PARAM_CMDID, 1649 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1650 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1651 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1652 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1653 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1654 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1655 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1656 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1657 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1658 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1659 WMI_10_4_VDEV_CREATE_CMDID, 1660 WMI_10_4_VDEV_DELETE_CMDID, 1661 WMI_10_4_VDEV_START_REQUEST_CMDID, 1662 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1663 WMI_10_4_VDEV_UP_CMDID, 1664 WMI_10_4_VDEV_STOP_CMDID, 1665 WMI_10_4_VDEV_DOWN_CMDID, 1666 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1667 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1668 WMI_10_4_VDEV_SET_PARAM_CMDID, 1669 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1670 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1671 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1672 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1673 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1674 WMI_10_4_PEER_CREATE_CMDID, 1675 WMI_10_4_PEER_DELETE_CMDID, 1676 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1677 WMI_10_4_PEER_SET_PARAM_CMDID, 1678 WMI_10_4_PEER_ASSOC_CMDID, 1679 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1680 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1681 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1682 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1683 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1684 WMI_10_4_BCN_TX_CMDID, 1685 WMI_10_4_PDEV_SEND_BCN_CMDID, 1686 WMI_10_4_BCN_PRB_TMPL_CMDID, 1687 WMI_10_4_BCN_FILTER_RX_CMDID, 1688 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1689 WMI_10_4_MGMT_TX_CMDID, 1690 WMI_10_4_PRB_TMPL_CMDID, 1691 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1692 WMI_10_4_ADDBA_SEND_CMDID, 1693 WMI_10_4_ADDBA_STATUS_CMDID, 1694 WMI_10_4_DELBA_SEND_CMDID, 1695 WMI_10_4_ADDBA_SET_RESP_CMDID, 1696 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1697 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1698 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1699 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1700 WMI_10_4_DBGLOG_CFG_CMDID, 1701 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1702 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1703 WMI_10_4_PDEV_QVIT_CMDID, 1704 WMI_10_4_ROAM_SCAN_MODE, 1705 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1706 WMI_10_4_ROAM_SCAN_PERIOD, 1707 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1708 WMI_10_4_ROAM_AP_PROFILE, 1709 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1710 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1711 WMI_10_4_OFL_SCAN_PERIOD, 1712 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1713 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1714 WMI_10_4_P2P_GO_SET_BEACON_IE, 1715 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1716 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1717 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1718 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1719 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1720 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1721 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1722 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1723 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1724 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1725 WMI_10_4_PDEV_SUSPEND_CMDID, 1726 WMI_10_4_PDEV_RESUME_CMDID, 1727 WMI_10_4_ADD_BCN_FILTER_CMDID, 1728 WMI_10_4_RMV_BCN_FILTER_CMDID, 1729 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1730 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1731 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1732 WMI_10_4_WOW_ENABLE_CMDID, 1733 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1734 WMI_10_4_RTT_MEASREQ_CMDID, 1735 WMI_10_4_RTT_TSF_CMDID, 1736 WMI_10_4_RTT_KEEPALIVE_CMDID, 1737 WMI_10_4_OEM_REQ_CMDID, 1738 WMI_10_4_NAN_CMDID, 1739 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1740 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1741 WMI_10_4_REQUEST_STATS_CMDID, 1742 WMI_10_4_GPIO_CONFIG_CMDID, 1743 WMI_10_4_GPIO_OUTPUT_CMDID, 1744 WMI_10_4_VDEV_RATEMASK_CMDID, 1745 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1746 WMI_10_4_GTK_OFFLOAD_CMDID, 1747 WMI_10_4_QBOOST_CFG_CMDID, 1748 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1749 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1750 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1751 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1752 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1753 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1754 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1755 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1756 WMI_10_4_FORCE_FW_HANG_CMDID, 1757 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1758 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1759 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1760 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1761 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1762 WMI_10_4_PDEV_FIPS_CMDID, 1763 WMI_10_4_TT_SET_CONF_CMDID, 1764 WMI_10_4_FWTEST_CMDID, 1765 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1766 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1767 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1768 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1769 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1770 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1771 WMI_10_4_PDEV_GET_TPC_CMDID, 1772 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1773 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1774 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1775 WMI_10_4_PDEV_GET_INFO_CMDID, 1776 WMI_10_4_VDEV_GET_INFO_CMDID, 1777 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1778 WMI_10_4_MU_CAL_START_CMDID, 1779 WMI_10_4_SET_CCA_PARAMS_CMDID, 1780 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1781 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1782 WMI_10_4_VDEV_SET_IE_CMDID, 1783 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1784 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1785 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1786 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1787 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1788 WMI_10_4_BTCOEX_CFG_CMDID, 1789 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1790 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1791 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1792 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1793 WMI_10_4_COEX_VERSION_CFG_CMID, 1794 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1795 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1796 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1797 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1798 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1799 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1800 WMI_10_4_GET_TSF_TIMER_CMDID, 1801 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1802 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1803 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1804 WMI_10_4_TDLS_SET_STATE_CMDID, 1805 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1806 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1807 WMI_10_4_PDEV_SEND_FD_CMDID, 1808 WMI_10_4_ENABLE_FILS_CMDID, 1809 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, 1810 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, 1811 WMI_10_4_RADAR_FOUND_CMDID, 1812 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1813 }; 1814 1815 enum wmi_10_4_event_id { 1816 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1817 WMI_10_4_READY_EVENTID, 1818 WMI_10_4_DEBUG_MESG_EVENTID, 1819 WMI_10_4_START_EVENTID = 0x9000, 1820 WMI_10_4_END_EVENTID = 0x9FFF, 1821 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1822 WMI_10_4_ECHO_EVENTID, 1823 WMI_10_4_UPDATE_STATS_EVENTID, 1824 WMI_10_4_INST_RSSI_STATS_EVENTID, 1825 WMI_10_4_VDEV_START_RESP_EVENTID, 1826 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1827 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1828 WMI_10_4_VDEV_STOPPED_EVENTID, 1829 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1830 WMI_10_4_HOST_SWBA_EVENTID, 1831 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1832 WMI_10_4_MGMT_RX_EVENTID, 1833 WMI_10_4_CHAN_INFO_EVENTID, 1834 WMI_10_4_PHYERR_EVENTID, 1835 WMI_10_4_ROAM_EVENTID, 1836 WMI_10_4_PROFILE_MATCH, 1837 WMI_10_4_DEBUG_PRINT_EVENTID, 1838 WMI_10_4_PDEV_QVIT_EVENTID, 1839 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1840 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1841 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1842 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1843 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1844 WMI_10_4_OEM_CAPABILITY_EVENTID, 1845 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1846 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1847 WMI_10_4_NAN_EVENTID, 1848 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1849 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1850 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1851 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1852 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1853 WMI_10_4_CSA_HANDLING_EVENTID, 1854 WMI_10_4_GPIO_INPUT_EVENTID, 1855 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1856 WMI_10_4_GENERIC_BUFFER_EVENTID, 1857 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1858 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1859 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1860 WMI_10_4_WDS_PEER_EVENTID, 1861 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1862 WMI_10_4_PDEV_FIPS_EVENTID, 1863 WMI_10_4_TT_STATS_EVENTID, 1864 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1865 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1866 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1867 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1868 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1869 WMI_10_4_PDEV_TPC_EVENTID, 1870 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1871 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1872 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1873 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1874 WMI_10_4_MU_REPORT_EVENTID, 1875 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1876 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1877 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1878 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1879 WMI_10_4_ATF_PEER_STATS_EVENTID, 1880 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1881 WMI_10_4_NAC_RSSI_EVENTID, 1882 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1883 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1884 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1885 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1886 WMI_10_4_TDLS_PEER_EVENTID, 1887 WMI_10_4_HOST_SWFDA_EVENTID, 1888 WMI_10_4_ESP_ESTIMATE_EVENTID, 1889 WMI_10_4_DFS_STATUS_CHECK_EVENTID, 1890 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1891 }; 1892 1893 enum wmi_phy_mode { 1894 MODE_11A = 0, /* 11a Mode */ 1895 MODE_11G = 1, /* 11b/g Mode */ 1896 MODE_11B = 2, /* 11b Mode */ 1897 MODE_11GONLY = 3, /* 11g only Mode */ 1898 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1899 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1900 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1901 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1902 MODE_11AC_VHT20 = 8, 1903 MODE_11AC_VHT40 = 9, 1904 MODE_11AC_VHT80 = 10, 1905 /* MODE_11AC_VHT160 = 11, */ 1906 MODE_11AC_VHT20_2G = 11, 1907 MODE_11AC_VHT40_2G = 12, 1908 MODE_11AC_VHT80_2G = 13, 1909 MODE_11AC_VHT80_80 = 14, 1910 MODE_11AC_VHT160 = 15, 1911 MODE_UNKNOWN = 16, 1912 MODE_MAX = 16 1913 }; 1914 1915 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1916 { 1917 switch (mode) { 1918 case MODE_11A: 1919 return "11a"; 1920 case MODE_11G: 1921 return "11g"; 1922 case MODE_11B: 1923 return "11b"; 1924 case MODE_11GONLY: 1925 return "11gonly"; 1926 case MODE_11NA_HT20: 1927 return "11na-ht20"; 1928 case MODE_11NG_HT20: 1929 return "11ng-ht20"; 1930 case MODE_11NA_HT40: 1931 return "11na-ht40"; 1932 case MODE_11NG_HT40: 1933 return "11ng-ht40"; 1934 case MODE_11AC_VHT20: 1935 return "11ac-vht20"; 1936 case MODE_11AC_VHT40: 1937 return "11ac-vht40"; 1938 case MODE_11AC_VHT80: 1939 return "11ac-vht80"; 1940 case MODE_11AC_VHT160: 1941 return "11ac-vht160"; 1942 case MODE_11AC_VHT80_80: 1943 return "11ac-vht80+80"; 1944 case MODE_11AC_VHT20_2G: 1945 return "11ac-vht20-2g"; 1946 case MODE_11AC_VHT40_2G: 1947 return "11ac-vht40-2g"; 1948 case MODE_11AC_VHT80_2G: 1949 return "11ac-vht80-2g"; 1950 case MODE_UNKNOWN: 1951 /* skip */ 1952 break; 1953 1954 /* no default handler to allow compiler to check that the 1955 * enum is fully handled 1956 */ 1957 }; 1958 1959 return "<unknown>"; 1960 } 1961 1962 #define WMI_CHAN_LIST_TAG 0x1 1963 #define WMI_SSID_LIST_TAG 0x2 1964 #define WMI_BSSID_LIST_TAG 0x3 1965 #define WMI_IE_TAG 0x4 1966 1967 struct wmi_channel { 1968 __le32 mhz; 1969 __le32 band_center_freq1; 1970 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 1971 union { 1972 __le32 flags; /* WMI_CHAN_FLAG_ */ 1973 struct { 1974 u8 mode; /* only 6 LSBs */ 1975 } __packed; 1976 } __packed; 1977 union { 1978 __le32 reginfo0; 1979 struct { 1980 /* note: power unit is 0.5 dBm */ 1981 u8 min_power; 1982 u8 max_power; 1983 u8 reg_power; 1984 u8 reg_classid; 1985 } __packed; 1986 } __packed; 1987 union { 1988 __le32 reginfo1; 1989 struct { 1990 u8 antenna_max; 1991 u8 max_tx_power; 1992 } __packed; 1993 } __packed; 1994 } __packed; 1995 1996 struct wmi_channel_arg { 1997 u32 freq; 1998 u32 band_center_freq1; 1999 u32 band_center_freq2; 2000 bool passive; 2001 bool allow_ibss; 2002 bool allow_ht; 2003 bool allow_vht; 2004 bool ht40plus; 2005 bool chan_radar; 2006 /* note: power unit is 0.5 dBm */ 2007 u32 min_power; 2008 u32 max_power; 2009 u32 max_reg_power; 2010 u32 max_antenna_gain; 2011 u32 reg_class_id; 2012 enum wmi_phy_mode mode; 2013 }; 2014 2015 enum wmi_channel_change_cause { 2016 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 2017 WMI_CHANNEL_CHANGE_CAUSE_CSA, 2018 }; 2019 2020 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 2021 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 2022 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 2023 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 2024 #define WMI_CHAN_FLAG_DFS (1 << 10) 2025 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 2026 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 2027 2028 /* Indicate reason for channel switch */ 2029 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 2030 2031 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 2032 2033 /* HT Capabilities*/ 2034 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2035 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2036 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2037 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2038 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2039 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2040 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2041 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2042 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2043 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2044 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2045 #define WMI_HT_CAP_HT40_SGI 0x0800 2046 2047 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2048 WMI_HT_CAP_HT20_SGI | \ 2049 WMI_HT_CAP_HT40_SGI | \ 2050 WMI_HT_CAP_TX_STBC | \ 2051 WMI_HT_CAP_RX_STBC | \ 2052 WMI_HT_CAP_LDPC) 2053 2054 /* 2055 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2056 * field. The fields not defined here are not supported, or reserved. 2057 * Do not change these masks and if you have to add new one follow the 2058 * bitmask as specified by 802.11ac draft. 2059 */ 2060 2061 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2062 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2063 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2064 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2065 #define WMI_VHT_CAP_TX_STBC 0x00000080 2066 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2067 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2068 #define WMI_VHT_CAP_SU_BFER 0x00000800 2069 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2070 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2071 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2072 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2073 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2074 #define WMI_VHT_CAP_MU_BFER 0x00080000 2075 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2076 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2077 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2078 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2079 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2080 2081 /* The following also refer for max HT AMSDU */ 2082 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2083 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2084 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2085 2086 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2087 WMI_VHT_CAP_RX_LDPC | \ 2088 WMI_VHT_CAP_SGI_80MHZ | \ 2089 WMI_VHT_CAP_TX_STBC | \ 2090 WMI_VHT_CAP_RX_STBC_MASK | \ 2091 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2092 WMI_VHT_CAP_RX_FIXED_ANT | \ 2093 WMI_VHT_CAP_TX_FIXED_ANT) 2094 2095 /* 2096 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2097 * 802.11ac 2098 */ 2099 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2100 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2101 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2102 2103 enum { 2104 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2105 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2106 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2107 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2108 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2109 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2110 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2111 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2112 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2113 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2114 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2115 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2116 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2117 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2118 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2119 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2120 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2121 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2122 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2123 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2124 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2125 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2126 REGDMN_MODE_ALL = 0xffffffff 2127 }; 2128 2129 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2130 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2131 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2132 2133 /* regulatory capabilities */ 2134 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2135 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2136 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2137 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2138 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2139 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2140 2141 struct hal_reg_capabilities { 2142 /* regdomain value specified in EEPROM */ 2143 __le32 eeprom_rd; 2144 /*regdomain */ 2145 __le32 eeprom_rd_ext; 2146 /* CAP1 capabilities bit map. */ 2147 __le32 regcap1; 2148 /* REGDMN EEPROM CAP. */ 2149 __le32 regcap2; 2150 /* REGDMN MODE */ 2151 __le32 wireless_modes; 2152 __le32 low_2ghz_chan; 2153 __le32 high_2ghz_chan; 2154 __le32 low_5ghz_chan; 2155 __le32 high_5ghz_chan; 2156 } __packed; 2157 2158 enum wlan_mode_capability { 2159 WHAL_WLAN_11A_CAPABILITY = 0x1, 2160 WHAL_WLAN_11G_CAPABILITY = 0x2, 2161 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2162 }; 2163 2164 /* structure used by FW for requesting host memory */ 2165 struct wlan_host_mem_req { 2166 /* ID of the request */ 2167 __le32 req_id; 2168 /* size of the of each unit */ 2169 __le32 unit_size; 2170 /* flags to indicate that 2171 * the number units is dependent 2172 * on number of resources(num vdevs num peers .. etc) 2173 */ 2174 __le32 num_unit_info; 2175 /* 2176 * actual number of units to allocate . if flags in the num_unit_info 2177 * indicate that number of units is tied to number of a particular 2178 * resource to allocate then num_units filed is set to 0 and host 2179 * will derive the number units from number of the resources it is 2180 * requesting. 2181 */ 2182 __le32 num_units; 2183 } __packed; 2184 2185 /* 2186 * The following struct holds optional payload for 2187 * wmi_service_ready_event,e.g., 11ac pass some of the 2188 * device capability to the host. 2189 */ 2190 struct wmi_service_ready_event { 2191 __le32 sw_version; 2192 __le32 sw_version_1; 2193 __le32 abi_version; 2194 /* WMI_PHY_CAPABILITY */ 2195 __le32 phy_capability; 2196 /* Maximum number of frag table entries that SW will populate less 1 */ 2197 __le32 max_frag_entry; 2198 __le32 wmi_service_bitmap[16]; 2199 __le32 num_rf_chains; 2200 /* 2201 * The following field is only valid for service type 2202 * WMI_SERVICE_11AC 2203 */ 2204 __le32 ht_cap_info; /* WMI HT Capability */ 2205 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2206 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2207 __le32 hw_min_tx_power; 2208 __le32 hw_max_tx_power; 2209 struct hal_reg_capabilities hal_reg_capabilities; 2210 __le32 sys_cap_info; 2211 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2212 /* 2213 * Max beacon and Probe Response IE offload size 2214 * (includes optional P2P IEs) 2215 */ 2216 __le32 max_bcn_ie_size; 2217 /* 2218 * request to host to allocate a chuck of memory and pss it down to FW 2219 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2220 * data structures. Only valid for low latency interfaces like PCIE 2221 * where FW can access this memory directly (or) by DMA. 2222 */ 2223 __le32 num_mem_reqs; 2224 struct wlan_host_mem_req mem_reqs[0]; 2225 } __packed; 2226 2227 /* This is the definition from 10.X firmware branch */ 2228 struct wmi_10x_service_ready_event { 2229 __le32 sw_version; 2230 __le32 abi_version; 2231 2232 /* WMI_PHY_CAPABILITY */ 2233 __le32 phy_capability; 2234 2235 /* Maximum number of frag table entries that SW will populate less 1 */ 2236 __le32 max_frag_entry; 2237 __le32 wmi_service_bitmap[16]; 2238 __le32 num_rf_chains; 2239 2240 /* 2241 * The following field is only valid for service type 2242 * WMI_SERVICE_11AC 2243 */ 2244 __le32 ht_cap_info; /* WMI HT Capability */ 2245 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2246 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2247 __le32 hw_min_tx_power; 2248 __le32 hw_max_tx_power; 2249 2250 struct hal_reg_capabilities hal_reg_capabilities; 2251 2252 __le32 sys_cap_info; 2253 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2254 2255 /* 2256 * request to host to allocate a chuck of memory and pss it down to FW 2257 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2258 * data structures. Only valid for low latency interfaces like PCIE 2259 * where FW can access this memory directly (or) by DMA. 2260 */ 2261 __le32 num_mem_reqs; 2262 2263 struct wlan_host_mem_req mem_reqs[0]; 2264 } __packed; 2265 2266 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2267 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2268 2269 struct wmi_ready_event { 2270 __le32 sw_version; 2271 __le32 abi_version; 2272 struct wmi_mac_addr mac_addr; 2273 __le32 status; 2274 } __packed; 2275 2276 struct wmi_resource_config { 2277 /* number of virtual devices (VAPs) to support */ 2278 __le32 num_vdevs; 2279 2280 /* number of peer nodes to support */ 2281 __le32 num_peers; 2282 2283 /* 2284 * In offload mode target supports features like WOW, chatter and 2285 * other protocol offloads. In order to support them some 2286 * functionalities like reorder buffering, PN checking need to be 2287 * done in target. This determines maximum number of peers supported 2288 * by target in offload mode 2289 */ 2290 __le32 num_offload_peers; 2291 2292 /* For target-based RX reordering */ 2293 __le32 num_offload_reorder_bufs; 2294 2295 /* number of keys per peer */ 2296 __le32 num_peer_keys; 2297 2298 /* total number of TX/RX data TIDs */ 2299 __le32 num_tids; 2300 2301 /* 2302 * max skid for resolving hash collisions 2303 * 2304 * The address search table is sparse, so that if two MAC addresses 2305 * result in the same hash value, the second of these conflicting 2306 * entries can slide to the next index in the address search table, 2307 * and use it, if it is unoccupied. This ast_skid_limit parameter 2308 * specifies the upper bound on how many subsequent indices to search 2309 * over to find an unoccupied space. 2310 */ 2311 __le32 ast_skid_limit; 2312 2313 /* 2314 * the nominal chain mask for transmit 2315 * 2316 * The chain mask may be modified dynamically, e.g. to operate AP 2317 * tx with a reduced number of chains if no clients are associated. 2318 * This configuration parameter specifies the nominal chain-mask that 2319 * should be used when not operating with a reduced set of tx chains. 2320 */ 2321 __le32 tx_chain_mask; 2322 2323 /* 2324 * the nominal chain mask for receive 2325 * 2326 * The chain mask may be modified dynamically, e.g. for a client 2327 * to use a reduced number of chains for receive if the traffic to 2328 * the client is low enough that it doesn't require downlink MIMO 2329 * or antenna diversity. 2330 * This configuration parameter specifies the nominal chain-mask that 2331 * should be used when not operating with a reduced set of rx chains. 2332 */ 2333 __le32 rx_chain_mask; 2334 2335 /* 2336 * what rx reorder timeout (ms) to use for the AC 2337 * 2338 * Each WMM access class (voice, video, best-effort, background) will 2339 * have its own timeout value to dictate how long to wait for missing 2340 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2341 * already been received. 2342 * This parameter specifies the timeout in milliseconds for each 2343 * class. 2344 */ 2345 __le32 rx_timeout_pri_vi; 2346 __le32 rx_timeout_pri_vo; 2347 __le32 rx_timeout_pri_be; 2348 __le32 rx_timeout_pri_bk; 2349 2350 /* 2351 * what mode the rx should decap packets to 2352 * 2353 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2354 * THis setting also determines the default TX behavior, however TX 2355 * behavior can be modified on a per VAP basis during VAP init 2356 */ 2357 __le32 rx_decap_mode; 2358 2359 /* what is the maximum number of scan requests that can be queued */ 2360 __le32 scan_max_pending_reqs; 2361 2362 /* maximum VDEV that could use BMISS offload */ 2363 __le32 bmiss_offload_max_vdev; 2364 2365 /* maximum VDEV that could use offload roaming */ 2366 __le32 roam_offload_max_vdev; 2367 2368 /* maximum AP profiles that would push to offload roaming */ 2369 __le32 roam_offload_max_ap_profiles; 2370 2371 /* 2372 * how many groups to use for mcast->ucast conversion 2373 * 2374 * The target's WAL maintains a table to hold information regarding 2375 * which peers belong to a given multicast group, so that if 2376 * multicast->unicast conversion is enabled, the target can convert 2377 * multicast tx frames to a series of unicast tx frames, to each 2378 * peer within the multicast group. 2379 This num_mcast_groups configuration parameter tells the target how 2380 * many multicast groups to provide storage for within its multicast 2381 * group membership table. 2382 */ 2383 __le32 num_mcast_groups; 2384 2385 /* 2386 * size to alloc for the mcast membership table 2387 * 2388 * This num_mcast_table_elems configuration parameter tells the 2389 * target how many peer elements it needs to provide storage for in 2390 * its multicast group membership table. 2391 * These multicast group membership table elements are shared by the 2392 * multicast groups stored within the table. 2393 */ 2394 __le32 num_mcast_table_elems; 2395 2396 /* 2397 * whether/how to do multicast->unicast conversion 2398 * 2399 * This configuration parameter specifies whether the target should 2400 * perform multicast --> unicast conversion on transmit, and if so, 2401 * what to do if it finds no entries in its multicast group 2402 * membership table for the multicast IP address in the tx frame. 2403 * Configuration value: 2404 * 0 -> Do not perform multicast to unicast conversion. 2405 * 1 -> Convert multicast frames to unicast, if the IP multicast 2406 * address from the tx frame is found in the multicast group 2407 * membership table. If the IP multicast address is not found, 2408 * drop the frame. 2409 * 2 -> Convert multicast frames to unicast, if the IP multicast 2410 * address from the tx frame is found in the multicast group 2411 * membership table. If the IP multicast address is not found, 2412 * transmit the frame as multicast. 2413 */ 2414 __le32 mcast2ucast_mode; 2415 2416 /* 2417 * how much memory to allocate for a tx PPDU dbg log 2418 * 2419 * This parameter controls how much memory the target will allocate 2420 * to store a log of tx PPDU meta-information (how large the PPDU 2421 * was, when it was sent, whether it was successful, etc.) 2422 */ 2423 __le32 tx_dbg_log_size; 2424 2425 /* how many AST entries to be allocated for WDS */ 2426 __le32 num_wds_entries; 2427 2428 /* 2429 * MAC DMA burst size, e.g., For target PCI limit can be 2430 * 0 -default, 1 256B 2431 */ 2432 __le32 dma_burst_size; 2433 2434 /* 2435 * Fixed delimiters to be inserted after every MPDU to 2436 * account for interface latency to avoid underrun. 2437 */ 2438 __le32 mac_aggr_delim; 2439 2440 /* 2441 * determine whether target is responsible for detecting duplicate 2442 * non-aggregate MPDU and timing out stale fragments. 2443 * 2444 * A-MPDU reordering is always performed on the target. 2445 * 2446 * 0: target responsible for frag timeout and dup checking 2447 * 1: host responsible for frag timeout and dup checking 2448 */ 2449 __le32 rx_skip_defrag_timeout_dup_detection_check; 2450 2451 /* 2452 * Configuration for VoW : 2453 * No of Video Nodes to be supported 2454 * and Max no of descriptors for each Video link (node). 2455 */ 2456 __le32 vow_config; 2457 2458 /* maximum VDEV that could use GTK offload */ 2459 __le32 gtk_offload_max_vdev; 2460 2461 /* Number of msdu descriptors target should use */ 2462 __le32 num_msdu_desc; 2463 2464 /* 2465 * Max. number of Tx fragments per MSDU 2466 * This parameter controls the max number of Tx fragments per MSDU. 2467 * This is sent by the target as part of the WMI_SERVICE_READY event 2468 * and is overridden by the OS shim as required. 2469 */ 2470 __le32 max_frag_entries; 2471 } __packed; 2472 2473 struct wmi_resource_config_10x { 2474 /* number of virtual devices (VAPs) to support */ 2475 __le32 num_vdevs; 2476 2477 /* number of peer nodes to support */ 2478 __le32 num_peers; 2479 2480 /* number of keys per peer */ 2481 __le32 num_peer_keys; 2482 2483 /* total number of TX/RX data TIDs */ 2484 __le32 num_tids; 2485 2486 /* 2487 * max skid for resolving hash collisions 2488 * 2489 * The address search table is sparse, so that if two MAC addresses 2490 * result in the same hash value, the second of these conflicting 2491 * entries can slide to the next index in the address search table, 2492 * and use it, if it is unoccupied. This ast_skid_limit parameter 2493 * specifies the upper bound on how many subsequent indices to search 2494 * over to find an unoccupied space. 2495 */ 2496 __le32 ast_skid_limit; 2497 2498 /* 2499 * the nominal chain mask for transmit 2500 * 2501 * The chain mask may be modified dynamically, e.g. to operate AP 2502 * tx with a reduced number of chains if no clients are associated. 2503 * This configuration parameter specifies the nominal chain-mask that 2504 * should be used when not operating with a reduced set of tx chains. 2505 */ 2506 __le32 tx_chain_mask; 2507 2508 /* 2509 * the nominal chain mask for receive 2510 * 2511 * The chain mask may be modified dynamically, e.g. for a client 2512 * to use a reduced number of chains for receive if the traffic to 2513 * the client is low enough that it doesn't require downlink MIMO 2514 * or antenna diversity. 2515 * This configuration parameter specifies the nominal chain-mask that 2516 * should be used when not operating with a reduced set of rx chains. 2517 */ 2518 __le32 rx_chain_mask; 2519 2520 /* 2521 * what rx reorder timeout (ms) to use for the AC 2522 * 2523 * Each WMM access class (voice, video, best-effort, background) will 2524 * have its own timeout value to dictate how long to wait for missing 2525 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2526 * already been received. 2527 * This parameter specifies the timeout in milliseconds for each 2528 * class. 2529 */ 2530 __le32 rx_timeout_pri_vi; 2531 __le32 rx_timeout_pri_vo; 2532 __le32 rx_timeout_pri_be; 2533 __le32 rx_timeout_pri_bk; 2534 2535 /* 2536 * what mode the rx should decap packets to 2537 * 2538 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2539 * THis setting also determines the default TX behavior, however TX 2540 * behavior can be modified on a per VAP basis during VAP init 2541 */ 2542 __le32 rx_decap_mode; 2543 2544 /* what is the maximum number of scan requests that can be queued */ 2545 __le32 scan_max_pending_reqs; 2546 2547 /* maximum VDEV that could use BMISS offload */ 2548 __le32 bmiss_offload_max_vdev; 2549 2550 /* maximum VDEV that could use offload roaming */ 2551 __le32 roam_offload_max_vdev; 2552 2553 /* maximum AP profiles that would push to offload roaming */ 2554 __le32 roam_offload_max_ap_profiles; 2555 2556 /* 2557 * how many groups to use for mcast->ucast conversion 2558 * 2559 * The target's WAL maintains a table to hold information regarding 2560 * which peers belong to a given multicast group, so that if 2561 * multicast->unicast conversion is enabled, the target can convert 2562 * multicast tx frames to a series of unicast tx frames, to each 2563 * peer within the multicast group. 2564 This num_mcast_groups configuration parameter tells the target how 2565 * many multicast groups to provide storage for within its multicast 2566 * group membership table. 2567 */ 2568 __le32 num_mcast_groups; 2569 2570 /* 2571 * size to alloc for the mcast membership table 2572 * 2573 * This num_mcast_table_elems configuration parameter tells the 2574 * target how many peer elements it needs to provide storage for in 2575 * its multicast group membership table. 2576 * These multicast group membership table elements are shared by the 2577 * multicast groups stored within the table. 2578 */ 2579 __le32 num_mcast_table_elems; 2580 2581 /* 2582 * whether/how to do multicast->unicast conversion 2583 * 2584 * This configuration parameter specifies whether the target should 2585 * perform multicast --> unicast conversion on transmit, and if so, 2586 * what to do if it finds no entries in its multicast group 2587 * membership table for the multicast IP address in the tx frame. 2588 * Configuration value: 2589 * 0 -> Do not perform multicast to unicast conversion. 2590 * 1 -> Convert multicast frames to unicast, if the IP multicast 2591 * address from the tx frame is found in the multicast group 2592 * membership table. If the IP multicast address is not found, 2593 * drop the frame. 2594 * 2 -> Convert multicast frames to unicast, if the IP multicast 2595 * address from the tx frame is found in the multicast group 2596 * membership table. If the IP multicast address is not found, 2597 * transmit the frame as multicast. 2598 */ 2599 __le32 mcast2ucast_mode; 2600 2601 /* 2602 * how much memory to allocate for a tx PPDU dbg log 2603 * 2604 * This parameter controls how much memory the target will allocate 2605 * to store a log of tx PPDU meta-information (how large the PPDU 2606 * was, when it was sent, whether it was successful, etc.) 2607 */ 2608 __le32 tx_dbg_log_size; 2609 2610 /* how many AST entries to be allocated for WDS */ 2611 __le32 num_wds_entries; 2612 2613 /* 2614 * MAC DMA burst size, e.g., For target PCI limit can be 2615 * 0 -default, 1 256B 2616 */ 2617 __le32 dma_burst_size; 2618 2619 /* 2620 * Fixed delimiters to be inserted after every MPDU to 2621 * account for interface latency to avoid underrun. 2622 */ 2623 __le32 mac_aggr_delim; 2624 2625 /* 2626 * determine whether target is responsible for detecting duplicate 2627 * non-aggregate MPDU and timing out stale fragments. 2628 * 2629 * A-MPDU reordering is always performed on the target. 2630 * 2631 * 0: target responsible for frag timeout and dup checking 2632 * 1: host responsible for frag timeout and dup checking 2633 */ 2634 __le32 rx_skip_defrag_timeout_dup_detection_check; 2635 2636 /* 2637 * Configuration for VoW : 2638 * No of Video Nodes to be supported 2639 * and Max no of descriptors for each Video link (node). 2640 */ 2641 __le32 vow_config; 2642 2643 /* Number of msdu descriptors target should use */ 2644 __le32 num_msdu_desc; 2645 2646 /* 2647 * Max. number of Tx fragments per MSDU 2648 * This parameter controls the max number of Tx fragments per MSDU. 2649 * This is sent by the target as part of the WMI_SERVICE_READY event 2650 * and is overridden by the OS shim as required. 2651 */ 2652 __le32 max_frag_entries; 2653 } __packed; 2654 2655 enum wmi_10_2_feature_mask { 2656 WMI_10_2_RX_BATCH_MODE = BIT(0), 2657 WMI_10_2_ATF_CONFIG = BIT(1), 2658 WMI_10_2_COEX_GPIO = BIT(3), 2659 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2660 WMI_10_2_PEER_STATS = BIT(7), 2661 }; 2662 2663 struct wmi_resource_config_10_2 { 2664 struct wmi_resource_config_10x common; 2665 __le32 max_peer_ext_stats; 2666 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2667 __le32 bk_min_free; 2668 __le32 be_min_free; 2669 __le32 vi_min_free; 2670 __le32 vo_min_free; 2671 __le32 feature_mask; 2672 } __packed; 2673 2674 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2675 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2676 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2677 2678 struct wmi_resource_config_10_4 { 2679 /* Number of virtual devices (VAPs) to support */ 2680 __le32 num_vdevs; 2681 2682 /* Number of peer nodes to support */ 2683 __le32 num_peers; 2684 2685 /* Number of active peer nodes to support */ 2686 __le32 num_active_peers; 2687 2688 /* In offload mode, target supports features like WOW, chatter and other 2689 * protocol offloads. In order to support them some functionalities like 2690 * reorder buffering, PN checking need to be done in target. 2691 * This determines maximum number of peers supported by target in 2692 * offload mode. 2693 */ 2694 __le32 num_offload_peers; 2695 2696 /* Number of reorder buffers available for doing target based reorder 2697 * Rx reorder buffering 2698 */ 2699 __le32 num_offload_reorder_buffs; 2700 2701 /* Number of keys per peer */ 2702 __le32 num_peer_keys; 2703 2704 /* Total number of TX/RX data TIDs */ 2705 __le32 num_tids; 2706 2707 /* Max skid for resolving hash collisions. 2708 * The address search table is sparse, so that if two MAC addresses 2709 * result in the same hash value, the second of these conflicting 2710 * entries can slide to the next index in the address search table, 2711 * and use it, if it is unoccupied. This ast_skid_limit parameter 2712 * specifies the upper bound on how many subsequent indices to search 2713 * over to find an unoccupied space. 2714 */ 2715 __le32 ast_skid_limit; 2716 2717 /* The nominal chain mask for transmit. 2718 * The chain mask may be modified dynamically, e.g. to operate AP tx 2719 * with a reduced number of chains if no clients are associated. 2720 * This configuration parameter specifies the nominal chain-mask that 2721 * should be used when not operating with a reduced set of tx chains. 2722 */ 2723 __le32 tx_chain_mask; 2724 2725 /* The nominal chain mask for receive. 2726 * The chain mask may be modified dynamically, e.g. for a client to use 2727 * a reduced number of chains for receive if the traffic to the client 2728 * is low enough that it doesn't require downlink MIMO or antenna 2729 * diversity. This configuration parameter specifies the nominal 2730 * chain-mask that should be used when not operating with a reduced 2731 * set of rx chains. 2732 */ 2733 __le32 rx_chain_mask; 2734 2735 /* What rx reorder timeout (ms) to use for the AC. 2736 * Each WMM access class (voice, video, best-effort, background) will 2737 * have its own timeout value to dictate how long to wait for missing 2738 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2739 * been received. This parameter specifies the timeout in milliseconds 2740 * for each class. 2741 */ 2742 __le32 rx_timeout_pri[4]; 2743 2744 /* What mode the rx should decap packets to. 2745 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2746 * This setting also determines the default TX behavior, however TX 2747 * behavior can be modified on a per VAP basis during VAP init 2748 */ 2749 __le32 rx_decap_mode; 2750 2751 __le32 scan_max_pending_req; 2752 2753 __le32 bmiss_offload_max_vdev; 2754 2755 __le32 roam_offload_max_vdev; 2756 2757 __le32 roam_offload_max_ap_profiles; 2758 2759 /* How many groups to use for mcast->ucast conversion. 2760 * The target's WAL maintains a table to hold information regarding 2761 * which peers belong to a given multicast group, so that if 2762 * multicast->unicast conversion is enabled, the target can convert 2763 * multicast tx frames to a series of unicast tx frames, to each peer 2764 * within the multicast group. This num_mcast_groups configuration 2765 * parameter tells the target how many multicast groups to provide 2766 * storage for within its multicast group membership table. 2767 */ 2768 __le32 num_mcast_groups; 2769 2770 /* Size to alloc for the mcast membership table. 2771 * This num_mcast_table_elems configuration parameter tells the target 2772 * how many peer elements it needs to provide storage for in its 2773 * multicast group membership table. These multicast group membership 2774 * table elements are shared by the multicast groups stored within 2775 * the table. 2776 */ 2777 __le32 num_mcast_table_elems; 2778 2779 /* Whether/how to do multicast->unicast conversion. 2780 * This configuration parameter specifies whether the target should 2781 * perform multicast --> unicast conversion on transmit, and if so, 2782 * what to do if it finds no entries in its multicast group membership 2783 * table for the multicast IP address in the tx frame. 2784 * Configuration value: 2785 * 0 -> Do not perform multicast to unicast conversion. 2786 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2787 * from the tx frame is found in the multicast group membership 2788 * table. If the IP multicast address is not found, drop the frame 2789 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2790 * from the tx frame is found in the multicast group membership 2791 * table. If the IP multicast address is not found, transmit the 2792 * frame as multicast. 2793 */ 2794 __le32 mcast2ucast_mode; 2795 2796 /* How much memory to allocate for a tx PPDU dbg log. 2797 * This parameter controls how much memory the target will allocate to 2798 * store a log of tx PPDU meta-information (how large the PPDU was, 2799 * when it was sent, whether it was successful, etc.) 2800 */ 2801 __le32 tx_dbg_log_size; 2802 2803 /* How many AST entries to be allocated for WDS */ 2804 __le32 num_wds_entries; 2805 2806 /* MAC DMA burst size. 0 -default, 1 -256B */ 2807 __le32 dma_burst_size; 2808 2809 /* Fixed delimiters to be inserted after every MPDU to account for 2810 * interface latency to avoid underrun. 2811 */ 2812 __le32 mac_aggr_delim; 2813 2814 /* Determine whether target is responsible for detecting duplicate 2815 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2816 * is always performed on the target. 2817 * 2818 * 0: target responsible for frag timeout and dup checking 2819 * 1: host responsible for frag timeout and dup checking 2820 */ 2821 __le32 rx_skip_defrag_timeout_dup_detection_check; 2822 2823 /* Configuration for VoW : No of Video nodes to be supported and max 2824 * no of descriptors for each video link (node). 2825 */ 2826 __le32 vow_config; 2827 2828 /* Maximum vdev that could use gtk offload */ 2829 __le32 gtk_offload_max_vdev; 2830 2831 /* Number of msdu descriptors target should use */ 2832 __le32 num_msdu_desc; 2833 2834 /* Max number of tx fragments per MSDU. 2835 * This parameter controls the max number of tx fragments per MSDU. 2836 * This will passed by target as part of the WMI_SERVICE_READY event 2837 * and is overridden by the OS shim as required. 2838 */ 2839 __le32 max_frag_entries; 2840 2841 /* Max number of extended peer stats. 2842 * This parameter controls the max number of peers for which extended 2843 * statistics are supported by target 2844 */ 2845 __le32 max_peer_ext_stats; 2846 2847 /* Smart antenna capabilities information. 2848 * 1 - Smart antenna is enabled 2849 * 0 - Smart antenna is disabled 2850 * In future this can contain smart antenna specific capabilities. 2851 */ 2852 __le32 smart_ant_cap; 2853 2854 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2855 * during init. 2856 */ 2857 __le32 bk_minfree; 2858 __le32 be_minfree; 2859 __le32 vi_minfree; 2860 __le32 vo_minfree; 2861 2862 /* Rx batch mode capability. 2863 * 1 - Rx batch mode enabled 2864 * 0 - Rx batch mode disabled 2865 */ 2866 __le32 rx_batchmode; 2867 2868 /* Thermal throttling capability. 2869 * 1 - Capable of thermal throttling 2870 * 0 - Not capable of thermal throttling 2871 */ 2872 __le32 tt_support; 2873 2874 /* ATF configuration. 2875 * 1 - Enable ATF 2876 * 0 - Disable ATF 2877 */ 2878 __le32 atf_config; 2879 2880 /* Configure padding to manage IP header un-alignment 2881 * 1 - Enable padding 2882 * 0 - Disable padding 2883 */ 2884 __le32 iphdr_pad_config; 2885 2886 /* qwrap configuration (bits 15-0) 2887 * 1 - This is qwrap configuration 2888 * 0 - This is not qwrap 2889 * 2890 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2891 * In order to get ack-RSSI reporting and to specify the tx-rate for 2892 * individual frames, this option must be enabled. This uses an extra 2893 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2894 */ 2895 __le32 qwrap_config; 2896 } __packed; 2897 2898 enum wmi_coex_version { 2899 WMI_NO_COEX_VERSION_SUPPORT = 0, 2900 /* 3 wire coex support*/ 2901 WMI_COEX_VERSION_1 = 1, 2902 /* 2.5 wire coex support*/ 2903 WMI_COEX_VERSION_2 = 2, 2904 /* 2.5 wire coex with duty cycle support */ 2905 WMI_COEX_VERSION_3 = 3, 2906 /* 4 wire coex support*/ 2907 WMI_COEX_VERSION_4 = 4, 2908 }; 2909 2910 /** 2911 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2912 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2913 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2914 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2915 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2916 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2917 * @WMI_10_4_PEER_STATS: Per station stats 2918 * @WMI_10_4_VDEV_STATS: Per vdev stats 2919 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 2920 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 2921 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 2922 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 2923 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 2924 * enable/disable 2925 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable 2926 */ 2927 enum wmi_10_4_feature_mask { 2928 WMI_10_4_LTEU_SUPPORT = BIT(0), 2929 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2930 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2931 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2932 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2933 WMI_10_4_PEER_STATS = BIT(5), 2934 WMI_10_4_VDEV_STATS = BIT(6), 2935 WMI_10_4_TDLS = BIT(7), 2936 WMI_10_4_TDLS_OFFCHAN = BIT(8), 2937 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 2938 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 2939 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 2940 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 2941 2942 }; 2943 2944 struct wmi_ext_resource_config_10_4_cmd { 2945 /* contains enum wmi_host_platform_type */ 2946 __le32 host_platform_config; 2947 /* see enum wmi_10_4_feature_mask */ 2948 __le32 fw_feature_bitmap; 2949 /* WLAN priority GPIO number */ 2950 __le32 wlan_gpio_priority; 2951 /* see enum wmi_coex_version */ 2952 __le32 coex_version; 2953 /* COEX GPIO config */ 2954 __le32 coex_gpio_pin1; 2955 __le32 coex_gpio_pin2; 2956 __le32 coex_gpio_pin3; 2957 /* number of vdevs allowed to perform tdls */ 2958 __le32 num_tdls_vdevs; 2959 /* number of peers to track per TDLS vdev */ 2960 __le32 num_tdls_conn_table_entries; 2961 /* number of tdls sleep sta supported */ 2962 __le32 max_tdls_concurrent_sleep_sta; 2963 /* number of tdls buffer sta supported */ 2964 __le32 max_tdls_concurrent_buffer_sta; 2965 }; 2966 2967 /* structure describing host memory chunk. */ 2968 struct host_memory_chunk { 2969 /* id of the request that is passed up in service ready */ 2970 __le32 req_id; 2971 /* the physical address the memory chunk */ 2972 __le32 ptr; 2973 /* size of the chunk */ 2974 __le32 size; 2975 } __packed; 2976 2977 struct wmi_host_mem_chunks { 2978 __le32 count; 2979 /* some fw revisions require at least 1 chunk regardless of count */ 2980 struct host_memory_chunk items[1]; 2981 } __packed; 2982 2983 struct wmi_init_cmd { 2984 struct wmi_resource_config resource_config; 2985 struct wmi_host_mem_chunks mem_chunks; 2986 } __packed; 2987 2988 /* _10x structure is from 10.X FW API */ 2989 struct wmi_init_cmd_10x { 2990 struct wmi_resource_config_10x resource_config; 2991 struct wmi_host_mem_chunks mem_chunks; 2992 } __packed; 2993 2994 struct wmi_init_cmd_10_2 { 2995 struct wmi_resource_config_10_2 resource_config; 2996 struct wmi_host_mem_chunks mem_chunks; 2997 } __packed; 2998 2999 struct wmi_init_cmd_10_4 { 3000 struct wmi_resource_config_10_4 resource_config; 3001 struct wmi_host_mem_chunks mem_chunks; 3002 } __packed; 3003 3004 struct wmi_chan_list_entry { 3005 __le16 freq; 3006 u8 phy_mode; /* valid for 10.2 only */ 3007 u8 reserved; 3008 } __packed; 3009 3010 /* TLV for channel list */ 3011 struct wmi_chan_list { 3012 __le32 tag; /* WMI_CHAN_LIST_TAG */ 3013 __le32 num_chan; 3014 struct wmi_chan_list_entry channel_list[0]; 3015 } __packed; 3016 3017 struct wmi_bssid_list { 3018 __le32 tag; /* WMI_BSSID_LIST_TAG */ 3019 __le32 num_bssid; 3020 struct wmi_mac_addr bssid_list[0]; 3021 } __packed; 3022 3023 struct wmi_ie_data { 3024 __le32 tag; /* WMI_IE_TAG */ 3025 __le32 ie_len; 3026 u8 ie_data[0]; 3027 } __packed; 3028 3029 struct wmi_ssid { 3030 __le32 ssid_len; 3031 u8 ssid[32]; 3032 } __packed; 3033 3034 struct wmi_ssid_list { 3035 __le32 tag; /* WMI_SSID_LIST_TAG */ 3036 __le32 num_ssids; 3037 struct wmi_ssid ssids[0]; 3038 } __packed; 3039 3040 /* prefix used by scan requestor ids on the host */ 3041 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3042 3043 /* prefix used by scan request ids generated on the host */ 3044 /* host cycles through the lower 12 bits to generate ids */ 3045 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3046 3047 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3048 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3049 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3050 3051 /* Values lower than this may be refused by some firmware revisions with a scan 3052 * completion with a timedout reason. 3053 */ 3054 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3055 3056 /* Scan priority numbers must be sequential, starting with 0 */ 3057 enum wmi_scan_priority { 3058 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3059 WMI_SCAN_PRIORITY_LOW, 3060 WMI_SCAN_PRIORITY_MEDIUM, 3061 WMI_SCAN_PRIORITY_HIGH, 3062 WMI_SCAN_PRIORITY_VERY_HIGH, 3063 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3064 }; 3065 3066 struct wmi_start_scan_common { 3067 /* Scan ID */ 3068 __le32 scan_id; 3069 /* Scan requestor ID */ 3070 __le32 scan_req_id; 3071 /* VDEV id(interface) that is requesting scan */ 3072 __le32 vdev_id; 3073 /* Scan Priority, input to scan scheduler */ 3074 __le32 scan_priority; 3075 /* Scan events subscription */ 3076 __le32 notify_scan_events; 3077 /* dwell time in msec on active channels */ 3078 __le32 dwell_time_active; 3079 /* dwell time in msec on passive channels */ 3080 __le32 dwell_time_passive; 3081 /* 3082 * min time in msec on the BSS channel,only valid if atleast one 3083 * VDEV is active 3084 */ 3085 __le32 min_rest_time; 3086 /* 3087 * max rest time in msec on the BSS channel,only valid if at least 3088 * one VDEV is active 3089 */ 3090 /* 3091 * the scanner will rest on the bss channel at least min_rest_time 3092 * after min_rest_time the scanner will start checking for tx/rx 3093 * activity on all VDEVs. if there is no activity the scanner will 3094 * switch to off channel. if there is activity the scanner will let 3095 * the radio on the bss channel until max_rest_time expires.at 3096 * max_rest_time scanner will switch to off channel irrespective of 3097 * activity. activity is determined by the idle_time parameter. 3098 */ 3099 __le32 max_rest_time; 3100 /* 3101 * time before sending next set of probe requests. 3102 * The scanner keeps repeating probe requests transmission with 3103 * period specified by repeat_probe_time. 3104 * The number of probe requests specified depends on the ssid_list 3105 * and bssid_list 3106 */ 3107 __le32 repeat_probe_time; 3108 /* time in msec between 2 consequetive probe requests with in a set. */ 3109 __le32 probe_spacing_time; 3110 /* 3111 * data inactivity time in msec on bss channel that will be used by 3112 * scanner for measuring the inactivity. 3113 */ 3114 __le32 idle_time; 3115 /* maximum time in msec allowed for scan */ 3116 __le32 max_scan_time; 3117 /* 3118 * delay in msec before sending first probe request after switching 3119 * to a channel 3120 */ 3121 __le32 probe_delay; 3122 /* Scan control flags */ 3123 __le32 scan_ctrl_flags; 3124 } __packed; 3125 3126 struct wmi_start_scan_tlvs { 3127 /* TLV parameters. These includes channel list, ssid list, bssid list, 3128 * extra ies. 3129 */ 3130 u8 tlvs[0]; 3131 } __packed; 3132 3133 struct wmi_start_scan_cmd { 3134 struct wmi_start_scan_common common; 3135 __le32 burst_duration_ms; 3136 struct wmi_start_scan_tlvs tlvs; 3137 } __packed; 3138 3139 /* This is the definition from 10.X firmware branch */ 3140 struct wmi_10x_start_scan_cmd { 3141 struct wmi_start_scan_common common; 3142 struct wmi_start_scan_tlvs tlvs; 3143 } __packed; 3144 3145 struct wmi_ssid_arg { 3146 int len; 3147 const u8 *ssid; 3148 }; 3149 3150 struct wmi_bssid_arg { 3151 const u8 *bssid; 3152 }; 3153 3154 struct wmi_start_scan_arg { 3155 u32 scan_id; 3156 u32 scan_req_id; 3157 u32 vdev_id; 3158 u32 scan_priority; 3159 u32 notify_scan_events; 3160 u32 dwell_time_active; 3161 u32 dwell_time_passive; 3162 u32 min_rest_time; 3163 u32 max_rest_time; 3164 u32 repeat_probe_time; 3165 u32 probe_spacing_time; 3166 u32 idle_time; 3167 u32 max_scan_time; 3168 u32 probe_delay; 3169 u32 scan_ctrl_flags; 3170 u32 burst_duration_ms; 3171 3172 u32 ie_len; 3173 u32 n_channels; 3174 u32 n_ssids; 3175 u32 n_bssids; 3176 3177 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3178 u16 channels[64]; 3179 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3180 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3181 struct wmi_mac_addr mac_addr; 3182 struct wmi_mac_addr mac_mask; 3183 }; 3184 3185 /* scan control flags */ 3186 3187 /* passively scan all channels including active channels */ 3188 #define WMI_SCAN_FLAG_PASSIVE 0x1 3189 /* add wild card ssid probe request even though ssid_list is specified. */ 3190 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3191 /* add cck rates to rates/xrate ie for the generated probe request */ 3192 #define WMI_SCAN_ADD_CCK_RATES 0x4 3193 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3194 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3195 /* To enable indication of Chan load and Noise floor to host */ 3196 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3197 /* Filter Probe request frames */ 3198 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3199 /* When set, DFS channels will not be scanned */ 3200 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3201 /* Different FW scan engine may choose to bail out on errors. 3202 * Allow the driver to have influence over that. 3203 */ 3204 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3205 3206 /* Use random MAC address for TA for Probe Request frame and add 3207 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. 3208 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. 3209 */ 3210 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 3211 3212 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3213 #define WMI_SCAN_CLASS_MASK 0xFF000000 3214 3215 enum wmi_stop_scan_type { 3216 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3217 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3218 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3219 }; 3220 3221 struct wmi_stop_scan_cmd { 3222 __le32 scan_req_id; 3223 __le32 scan_id; 3224 __le32 req_type; 3225 __le32 vdev_id; 3226 } __packed; 3227 3228 struct wmi_stop_scan_arg { 3229 u32 req_id; 3230 enum wmi_stop_scan_type req_type; 3231 union { 3232 u32 scan_id; 3233 u32 vdev_id; 3234 } u; 3235 }; 3236 3237 struct wmi_scan_chan_list_cmd { 3238 __le32 num_scan_chans; 3239 struct wmi_channel chan_info[0]; 3240 } __packed; 3241 3242 struct wmi_scan_chan_list_arg { 3243 u32 n_channels; 3244 struct wmi_channel_arg *channels; 3245 }; 3246 3247 enum wmi_bss_filter { 3248 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3249 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3250 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3251 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3252 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3253 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3254 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3255 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3256 }; 3257 3258 enum wmi_scan_event_type { 3259 WMI_SCAN_EVENT_STARTED = BIT(0), 3260 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3261 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3262 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3263 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3264 /* possibly by high-prio scan */ 3265 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3266 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3267 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3268 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3269 WMI_SCAN_EVENT_MAX = BIT(15), 3270 }; 3271 3272 enum wmi_scan_completion_reason { 3273 WMI_SCAN_REASON_COMPLETED, 3274 WMI_SCAN_REASON_CANCELLED, 3275 WMI_SCAN_REASON_PREEMPTED, 3276 WMI_SCAN_REASON_TIMEDOUT, 3277 WMI_SCAN_REASON_INTERNAL_FAILURE, 3278 WMI_SCAN_REASON_MAX, 3279 }; 3280 3281 struct wmi_scan_event { 3282 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3283 __le32 reason; /* %WMI_SCAN_REASON_ */ 3284 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3285 __le32 scan_req_id; 3286 __le32 scan_id; 3287 __le32 vdev_id; 3288 } __packed; 3289 3290 /* 3291 * This defines how much headroom is kept in the 3292 * receive frame between the descriptor and the 3293 * payload, in order for the WMI PHY error and 3294 * management handler to insert header contents. 3295 * 3296 * This is in bytes. 3297 */ 3298 #define WMI_MGMT_RX_HDR_HEADROOM 52 3299 3300 /* 3301 * This event will be used for sending scan results 3302 * as well as rx mgmt frames to the host. The rx buffer 3303 * will be sent as part of this WMI event. It would be a 3304 * good idea to pass all the fields in the RX status 3305 * descriptor up to the host. 3306 */ 3307 struct wmi_mgmt_rx_hdr_v1 { 3308 __le32 channel; 3309 __le32 snr; 3310 __le32 rate; 3311 __le32 phy_mode; 3312 __le32 buf_len; 3313 __le32 status; /* %WMI_RX_STATUS_ */ 3314 } __packed; 3315 3316 struct wmi_mgmt_rx_hdr_v2 { 3317 struct wmi_mgmt_rx_hdr_v1 v1; 3318 __le32 rssi_ctl[4]; 3319 } __packed; 3320 3321 struct wmi_mgmt_rx_event_v1 { 3322 struct wmi_mgmt_rx_hdr_v1 hdr; 3323 u8 buf[0]; 3324 } __packed; 3325 3326 struct wmi_mgmt_rx_event_v2 { 3327 struct wmi_mgmt_rx_hdr_v2 hdr; 3328 u8 buf[0]; 3329 } __packed; 3330 3331 struct wmi_10_4_mgmt_rx_hdr { 3332 __le32 channel; 3333 __le32 snr; 3334 u8 rssi_ctl[4]; 3335 __le32 rate; 3336 __le32 phy_mode; 3337 __le32 buf_len; 3338 __le32 status; 3339 } __packed; 3340 3341 struct wmi_10_4_mgmt_rx_event { 3342 struct wmi_10_4_mgmt_rx_hdr hdr; 3343 u8 buf[0]; 3344 } __packed; 3345 3346 struct wmi_mgmt_rx_ext_info { 3347 __le64 rx_mac_timestamp; 3348 } __packed __aligned(4); 3349 3350 #define WMI_RX_STATUS_OK 0x00 3351 #define WMI_RX_STATUS_ERR_CRC 0x01 3352 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3353 #define WMI_RX_STATUS_ERR_MIC 0x10 3354 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3355 /* Extension data at the end of mgmt frame */ 3356 #define WMI_RX_STATUS_EXT_INFO 0x40 3357 3358 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3359 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3360 #define PHY_ERROR_GEN_RADAR 0x05 3361 3362 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3363 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3364 3365 enum phy_err_type { 3366 PHY_ERROR_UNKNOWN, 3367 PHY_ERROR_SPECTRAL_SCAN, 3368 PHY_ERROR_FALSE_RADAR_EXT, 3369 PHY_ERROR_RADAR 3370 }; 3371 3372 struct wmi_phyerr { 3373 __le32 tsf_timestamp; 3374 __le16 freq1; 3375 __le16 freq2; 3376 u8 rssi_combined; 3377 u8 chan_width_mhz; 3378 u8 phy_err_code; 3379 u8 rsvd0; 3380 __le32 rssi_chains[4]; 3381 __le16 nf_chains[4]; 3382 __le32 buf_len; 3383 u8 buf[0]; 3384 } __packed; 3385 3386 struct wmi_phyerr_event { 3387 __le32 num_phyerrs; 3388 __le32 tsf_l32; 3389 __le32 tsf_u32; 3390 struct wmi_phyerr phyerrs[0]; 3391 } __packed; 3392 3393 struct wmi_10_4_phyerr_event { 3394 __le32 tsf_l32; 3395 __le32 tsf_u32; 3396 __le16 freq1; 3397 __le16 freq2; 3398 u8 rssi_combined; 3399 u8 chan_width_mhz; 3400 u8 phy_err_code; 3401 u8 rsvd0; 3402 __le32 rssi_chains[4]; 3403 __le16 nf_chains[4]; 3404 __le32 phy_err_mask[2]; 3405 __le32 tsf_timestamp; 3406 __le32 buf_len; 3407 u8 buf[0]; 3408 } __packed; 3409 3410 struct wmi_radar_found_info { 3411 __le32 pri_min; 3412 __le32 pri_max; 3413 __le32 width_min; 3414 __le32 width_max; 3415 __le32 sidx_min; 3416 __le32 sidx_max; 3417 } __packed; 3418 3419 enum wmi_radar_confirmation_status { 3420 /* Detected radar was due to SW pulses */ 3421 WMI_SW_RADAR_DETECTED = 0, 3422 3423 WMI_RADAR_DETECTION_FAIL = 1, 3424 3425 /* Real radar detected */ 3426 WMI_HW_RADAR_DETECTED = 2, 3427 }; 3428 3429 #define PHYERR_TLV_SIG 0xBB 3430 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3431 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3432 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3433 3434 struct phyerr_radar_report { 3435 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3436 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3437 } __packed; 3438 3439 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3440 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3441 3442 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3443 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3444 3445 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3446 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3447 3448 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3449 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3450 3451 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3452 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3453 3454 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3455 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3456 3457 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3458 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3459 3460 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3461 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3462 3463 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3464 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3465 3466 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3467 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3468 3469 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3470 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3471 3472 struct phyerr_fft_report { 3473 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3474 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3475 } __packed; 3476 3477 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3478 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3479 3480 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3481 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3482 3483 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3484 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3485 3486 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3487 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3488 3489 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3490 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3491 3492 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3493 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3494 3495 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3496 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3497 3498 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3499 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3500 3501 struct phyerr_tlv { 3502 __le16 len; 3503 u8 tag; 3504 u8 sig; 3505 } __packed; 3506 3507 #define DFS_RSSI_POSSIBLY_FALSE 50 3508 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3509 3510 struct wmi_mgmt_tx_hdr { 3511 __le32 vdev_id; 3512 struct wmi_mac_addr peer_macaddr; 3513 __le32 tx_rate; 3514 __le32 tx_power; 3515 __le32 buf_len; 3516 } __packed; 3517 3518 struct wmi_mgmt_tx_cmd { 3519 struct wmi_mgmt_tx_hdr hdr; 3520 u8 buf[0]; 3521 } __packed; 3522 3523 struct wmi_echo_event { 3524 __le32 value; 3525 } __packed; 3526 3527 struct wmi_echo_cmd { 3528 __le32 value; 3529 } __packed; 3530 3531 struct wmi_pdev_set_regdomain_cmd { 3532 __le32 reg_domain; 3533 __le32 reg_domain_2G; 3534 __le32 reg_domain_5G; 3535 __le32 conformance_test_limit_2G; 3536 __le32 conformance_test_limit_5G; 3537 } __packed; 3538 3539 enum wmi_dfs_region { 3540 /* Uninitialized dfs domain */ 3541 WMI_UNINIT_DFS_DOMAIN = 0, 3542 3543 /* FCC3 dfs domain */ 3544 WMI_FCC_DFS_DOMAIN = 1, 3545 3546 /* ETSI dfs domain */ 3547 WMI_ETSI_DFS_DOMAIN = 2, 3548 3549 /*Japan dfs domain */ 3550 WMI_MKK4_DFS_DOMAIN = 3, 3551 }; 3552 3553 struct wmi_pdev_set_regdomain_cmd_10x { 3554 __le32 reg_domain; 3555 __le32 reg_domain_2G; 3556 __le32 reg_domain_5G; 3557 __le32 conformance_test_limit_2G; 3558 __le32 conformance_test_limit_5G; 3559 3560 /* dfs domain from wmi_dfs_region */ 3561 __le32 dfs_domain; 3562 } __packed; 3563 3564 /* Command to set/unset chip in quiet mode */ 3565 struct wmi_pdev_set_quiet_cmd { 3566 /* period in TUs */ 3567 __le32 period; 3568 3569 /* duration in TUs */ 3570 __le32 duration; 3571 3572 /* offset in TUs */ 3573 __le32 next_start; 3574 3575 /* enable/disable */ 3576 __le32 enabled; 3577 } __packed; 3578 3579 /* 3580 * 802.11g protection mode. 3581 */ 3582 enum ath10k_protmode { 3583 ATH10K_PROT_NONE = 0, /* no protection */ 3584 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3585 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3586 }; 3587 3588 enum wmi_rtscts_profile { 3589 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3590 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3591 WMI_RTSCTS_ACROSS_SW_RETRIES 3592 }; 3593 3594 #define WMI_RTSCTS_ENABLED 1 3595 #define WMI_RTSCTS_SET_MASK 0x0f 3596 #define WMI_RTSCTS_SET_LSB 0 3597 3598 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3599 #define WMI_RTSCTS_PROFILE_LSB 4 3600 3601 enum wmi_beacon_gen_mode { 3602 WMI_BEACON_STAGGERED_MODE = 0, 3603 WMI_BEACON_BURST_MODE = 1 3604 }; 3605 3606 enum wmi_csa_event_ies_present_flag { 3607 WMI_CSA_IE_PRESENT = 0x00000001, 3608 WMI_XCSA_IE_PRESENT = 0x00000002, 3609 WMI_WBW_IE_PRESENT = 0x00000004, 3610 WMI_CSWARP_IE_PRESENT = 0x00000008, 3611 }; 3612 3613 /* wmi CSA receive event from beacon frame */ 3614 struct wmi_csa_event { 3615 __le32 i_fc_dur; 3616 /* Bit 0-15: FC */ 3617 /* Bit 16-31: DUR */ 3618 struct wmi_mac_addr i_addr1; 3619 struct wmi_mac_addr i_addr2; 3620 __le32 csa_ie[2]; 3621 __le32 xcsa_ie[2]; 3622 __le32 wb_ie[2]; 3623 __le32 cswarp_ie; 3624 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3625 } __packed; 3626 3627 /* the definition of different PDEV parameters */ 3628 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3629 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3630 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3631 3632 struct wmi_pdev_param_map { 3633 u32 tx_chain_mask; 3634 u32 rx_chain_mask; 3635 u32 txpower_limit2g; 3636 u32 txpower_limit5g; 3637 u32 txpower_scale; 3638 u32 beacon_gen_mode; 3639 u32 beacon_tx_mode; 3640 u32 resmgr_offchan_mode; 3641 u32 protection_mode; 3642 u32 dynamic_bw; 3643 u32 non_agg_sw_retry_th; 3644 u32 agg_sw_retry_th; 3645 u32 sta_kickout_th; 3646 u32 ac_aggrsize_scaling; 3647 u32 ltr_enable; 3648 u32 ltr_ac_latency_be; 3649 u32 ltr_ac_latency_bk; 3650 u32 ltr_ac_latency_vi; 3651 u32 ltr_ac_latency_vo; 3652 u32 ltr_ac_latency_timeout; 3653 u32 ltr_sleep_override; 3654 u32 ltr_rx_override; 3655 u32 ltr_tx_activity_timeout; 3656 u32 l1ss_enable; 3657 u32 dsleep_enable; 3658 u32 pcielp_txbuf_flush; 3659 u32 pcielp_txbuf_watermark; 3660 u32 pcielp_txbuf_tmo_en; 3661 u32 pcielp_txbuf_tmo_value; 3662 u32 pdev_stats_update_period; 3663 u32 vdev_stats_update_period; 3664 u32 peer_stats_update_period; 3665 u32 bcnflt_stats_update_period; 3666 u32 pmf_qos; 3667 u32 arp_ac_override; 3668 u32 dcs; 3669 u32 ani_enable; 3670 u32 ani_poll_period; 3671 u32 ani_listen_period; 3672 u32 ani_ofdm_level; 3673 u32 ani_cck_level; 3674 u32 dyntxchain; 3675 u32 proxy_sta; 3676 u32 idle_ps_config; 3677 u32 power_gating_sleep; 3678 u32 fast_channel_reset; 3679 u32 burst_dur; 3680 u32 burst_enable; 3681 u32 cal_period; 3682 u32 aggr_burst; 3683 u32 rx_decap_mode; 3684 u32 smart_antenna_default_antenna; 3685 u32 igmpmld_override; 3686 u32 igmpmld_tid; 3687 u32 antenna_gain; 3688 u32 rx_filter; 3689 u32 set_mcast_to_ucast_tid; 3690 u32 proxy_sta_mode; 3691 u32 set_mcast2ucast_mode; 3692 u32 set_mcast2ucast_buffer; 3693 u32 remove_mcast2ucast_buffer; 3694 u32 peer_sta_ps_statechg_enable; 3695 u32 igmpmld_ac_override; 3696 u32 block_interbss; 3697 u32 set_disable_reset_cmdid; 3698 u32 set_msdu_ttl_cmdid; 3699 u32 set_ppdu_duration_cmdid; 3700 u32 txbf_sound_period_cmdid; 3701 u32 set_promisc_mode_cmdid; 3702 u32 set_burst_mode_cmdid; 3703 u32 en_stats; 3704 u32 mu_group_policy; 3705 u32 noise_detection; 3706 u32 noise_threshold; 3707 u32 dpd_enable; 3708 u32 set_mcast_bcast_echo; 3709 u32 atf_strict_sch; 3710 u32 atf_sched_duration; 3711 u32 ant_plzn; 3712 u32 mgmt_retry_limit; 3713 u32 sensitivity_level; 3714 u32 signed_txpower_2g; 3715 u32 signed_txpower_5g; 3716 u32 enable_per_tid_amsdu; 3717 u32 enable_per_tid_ampdu; 3718 u32 cca_threshold; 3719 u32 rts_fixed_rate; 3720 u32 pdev_reset; 3721 u32 wapi_mbssid_offset; 3722 u32 arp_srcaddr; 3723 u32 arp_dstaddr; 3724 u32 enable_btcoex; 3725 }; 3726 3727 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3728 3729 enum wmi_pdev_param { 3730 /* TX chain mask */ 3731 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3732 /* RX chain mask */ 3733 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3734 /* TX power limit for 2G Radio */ 3735 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3736 /* TX power limit for 5G Radio */ 3737 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3738 /* TX power scale */ 3739 WMI_PDEV_PARAM_TXPOWER_SCALE, 3740 /* Beacon generation mode . 0: host, 1: target */ 3741 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3742 /* Beacon generation mode . 0: staggered 1: bursted */ 3743 WMI_PDEV_PARAM_BEACON_TX_MODE, 3744 /* 3745 * Resource manager off chan mode . 3746 * 0: turn off off chan mode. 1: turn on offchan mode 3747 */ 3748 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3749 /* 3750 * Protection mode: 3751 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3752 */ 3753 WMI_PDEV_PARAM_PROTECTION_MODE, 3754 /* 3755 * Dynamic bandwidth - 0: disable, 1: enable 3756 * 3757 * When enabled HW rate control tries different bandwidths when 3758 * retransmitting frames. 3759 */ 3760 WMI_PDEV_PARAM_DYNAMIC_BW, 3761 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3762 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3763 /* aggregrate sw retry threshold. 0-disable*/ 3764 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3765 /* Station kickout threshold (non of consecutive failures).0-disable */ 3766 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3767 /* Aggerate size scaling configuration per AC */ 3768 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3769 /* LTR enable */ 3770 WMI_PDEV_PARAM_LTR_ENABLE, 3771 /* LTR latency for BE, in us */ 3772 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3773 /* LTR latency for BK, in us */ 3774 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3775 /* LTR latency for VI, in us */ 3776 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3777 /* LTR latency for VO, in us */ 3778 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3779 /* LTR AC latency timeout, in ms */ 3780 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3781 /* LTR platform latency override, in us */ 3782 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3783 /* LTR-RX override, in us */ 3784 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3785 /* Tx activity timeout for LTR, in us */ 3786 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3787 /* L1SS state machine enable */ 3788 WMI_PDEV_PARAM_L1SS_ENABLE, 3789 /* Deep sleep state machine enable */ 3790 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3791 /* RX buffering flush enable */ 3792 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3793 /* RX buffering matermark */ 3794 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3795 /* RX buffering timeout enable */ 3796 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3797 /* RX buffering timeout value */ 3798 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3799 /* pdev level stats update period in ms */ 3800 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3801 /* vdev level stats update period in ms */ 3802 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3803 /* peer level stats update period in ms */ 3804 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3805 /* beacon filter status update period */ 3806 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3807 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3808 WMI_PDEV_PARAM_PMF_QOS, 3809 /* Access category on which ARP frames are sent */ 3810 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3811 /* DCS configuration */ 3812 WMI_PDEV_PARAM_DCS, 3813 /* Enable/Disable ANI on target */ 3814 WMI_PDEV_PARAM_ANI_ENABLE, 3815 /* configure the ANI polling period */ 3816 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3817 /* configure the ANI listening period */ 3818 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3819 /* configure OFDM immunity level */ 3820 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3821 /* configure CCK immunity level */ 3822 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3823 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3824 WMI_PDEV_PARAM_DYNTXCHAIN, 3825 /* Enable/Disable proxy STA */ 3826 WMI_PDEV_PARAM_PROXY_STA, 3827 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3828 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3829 /* Enable/Disable power gating sleep */ 3830 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3831 }; 3832 3833 enum wmi_10x_pdev_param { 3834 /* TX chian mask */ 3835 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3836 /* RX chian mask */ 3837 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3838 /* TX power limit for 2G Radio */ 3839 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3840 /* TX power limit for 5G Radio */ 3841 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3842 /* TX power scale */ 3843 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3844 /* Beacon generation mode . 0: host, 1: target */ 3845 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3846 /* Beacon generation mode . 0: staggered 1: bursted */ 3847 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3848 /* 3849 * Resource manager off chan mode . 3850 * 0: turn off off chan mode. 1: turn on offchan mode 3851 */ 3852 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3853 /* 3854 * Protection mode: 3855 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3856 */ 3857 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3858 /* Dynamic bandwidth 0: disable 1: enable */ 3859 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3860 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3861 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3862 /* aggregrate sw retry threshold. 0-disable*/ 3863 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3864 /* Station kickout threshold (non of consecutive failures).0-disable */ 3865 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3866 /* Aggerate size scaling configuration per AC */ 3867 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3868 /* LTR enable */ 3869 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3870 /* LTR latency for BE, in us */ 3871 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3872 /* LTR latency for BK, in us */ 3873 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3874 /* LTR latency for VI, in us */ 3875 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3876 /* LTR latency for VO, in us */ 3877 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3878 /* LTR AC latency timeout, in ms */ 3879 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3880 /* LTR platform latency override, in us */ 3881 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3882 /* LTR-RX override, in us */ 3883 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3884 /* Tx activity timeout for LTR, in us */ 3885 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3886 /* L1SS state machine enable */ 3887 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3888 /* Deep sleep state machine enable */ 3889 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3890 /* pdev level stats update period in ms */ 3891 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3892 /* vdev level stats update period in ms */ 3893 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3894 /* peer level stats update period in ms */ 3895 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3896 /* beacon filter status update period */ 3897 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3898 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3899 WMI_10X_PDEV_PARAM_PMF_QOS, 3900 /* Access category on which ARP and DHCP frames are sent */ 3901 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3902 /* DCS configuration */ 3903 WMI_10X_PDEV_PARAM_DCS, 3904 /* Enable/Disable ANI on target */ 3905 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3906 /* configure the ANI polling period */ 3907 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3908 /* configure the ANI listening period */ 3909 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3910 /* configure OFDM immunity level */ 3911 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3912 /* configure CCK immunity level */ 3913 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3914 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3915 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3916 /* Enable/Disable Fast channel reset*/ 3917 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3918 /* Set Bursting DUR */ 3919 WMI_10X_PDEV_PARAM_BURST_DUR, 3920 /* Set Bursting Enable*/ 3921 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3922 3923 /* following are available as of firmware 10.2 */ 3924 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3925 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3926 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3927 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3928 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3929 WMI_10X_PDEV_PARAM_RX_FILTER, 3930 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3931 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3932 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3933 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3934 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3935 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3936 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3937 WMI_10X_PDEV_PARAM_CAL_PERIOD 3938 }; 3939 3940 enum wmi_10_4_pdev_param { 3941 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3942 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 3943 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 3944 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 3945 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 3946 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 3947 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 3948 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3949 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 3950 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 3951 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3952 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 3953 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 3954 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3955 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 3956 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 3957 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 3958 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 3959 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 3960 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3961 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3962 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 3963 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3964 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 3965 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 3966 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3967 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3968 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3969 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3970 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3971 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3972 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3973 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3974 WMI_10_4_PDEV_PARAM_PMF_QOS, 3975 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 3976 WMI_10_4_PDEV_PARAM_DCS, 3977 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 3978 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 3979 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 3980 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 3981 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 3982 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 3983 WMI_10_4_PDEV_PARAM_PROXY_STA, 3984 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 3985 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 3986 WMI_10_4_PDEV_PARAM_AGGR_BURST, 3987 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 3988 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 3989 WMI_10_4_PDEV_PARAM_BURST_DUR, 3990 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 3991 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3992 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 3993 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 3994 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 3995 WMI_10_4_PDEV_PARAM_RX_FILTER, 3996 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 3997 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 3998 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3999 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4000 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4001 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 4002 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 4003 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 4004 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 4005 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 4006 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 4007 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 4008 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4009 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 4010 WMI_10_4_PDEV_PARAM_EN_STATS, 4011 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 4012 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 4013 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 4014 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 4015 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 4016 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 4017 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 4018 WMI_10_4_PDEV_PARAM_ANT_PLZN, 4019 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 4020 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 4021 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 4022 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 4023 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 4024 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 4025 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 4026 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 4027 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 4028 WMI_10_4_PDEV_PARAM_PDEV_RESET, 4029 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 4030 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 4031 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 4032 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 4033 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 4034 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 4035 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 4036 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 4037 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 4038 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 4039 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 4040 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 4041 }; 4042 4043 struct wmi_pdev_set_param_cmd { 4044 __le32 param_id; 4045 __le32 param_value; 4046 } __packed; 4047 4048 /* valid period is 1 ~ 60000ms, unit in millisecond */ 4049 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 4050 4051 struct wmi_pdev_get_tpc_config_cmd { 4052 /* parameter */ 4053 __le32 param; 4054 } __packed; 4055 4056 #define WMI_TPC_CONFIG_PARAM 1 4057 #define WMI_TPC_FINAL_RATE_MAX 240 4058 #define WMI_TPC_TX_N_CHAIN 4 4059 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) 4060 #define WMI_TPC_PREAM_TABLE_MAX 10 4061 #define WMI_TPC_FLAG 3 4062 #define WMI_TPC_BUF_SIZE 10 4063 #define WMI_TPC_BEAMFORMING 2 4064 4065 enum wmi_tpc_table_type { 4066 WMI_TPC_TABLE_TYPE_CDD = 0, 4067 WMI_TPC_TABLE_TYPE_STBC = 1, 4068 WMI_TPC_TABLE_TYPE_TXBF = 2, 4069 }; 4070 4071 enum wmi_tpc_config_event_flag { 4072 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4073 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4074 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4075 }; 4076 4077 struct wmi_pdev_tpc_config_event { 4078 __le32 reg_domain; 4079 __le32 chan_freq; 4080 __le32 phy_mode; 4081 __le32 twice_antenna_reduction; 4082 __le32 twice_max_rd_power; 4083 a_sle32 twice_antenna_gain; 4084 __le32 power_limit; 4085 __le32 rate_max; 4086 __le32 num_tx_chain; 4087 __le32 ctl; 4088 __le32 flags; 4089 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4090 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4091 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4092 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4093 u8 rates_array[WMI_TPC_RATE_MAX]; 4094 } __packed; 4095 4096 /* Transmit power scale factor. */ 4097 enum wmi_tp_scale { 4098 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4099 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4100 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4101 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4102 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4103 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4104 }; 4105 4106 struct wmi_pdev_tpc_final_table_event { 4107 __le32 reg_domain; 4108 __le32 chan_freq; 4109 __le32 phy_mode; 4110 __le32 twice_antenna_reduction; 4111 __le32 twice_max_rd_power; 4112 a_sle32 twice_antenna_gain; 4113 __le32 power_limit; 4114 __le32 rate_max; 4115 __le32 num_tx_chain; 4116 __le32 ctl; 4117 __le32 flags; 4118 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4119 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4120 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4121 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4122 u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; 4123 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] 4124 [WMI_TPC_TX_N_CHAIN]; 4125 } __packed; 4126 4127 struct wmi_pdev_get_tpc_table_cmd { 4128 __le32 param; 4129 } __packed; 4130 4131 enum wmi_tpc_pream_2ghz { 4132 WMI_TPC_PREAM_2GHZ_CCK = 0, 4133 WMI_TPC_PREAM_2GHZ_OFDM, 4134 WMI_TPC_PREAM_2GHZ_HT20, 4135 WMI_TPC_PREAM_2GHZ_HT40, 4136 WMI_TPC_PREAM_2GHZ_VHT20, 4137 WMI_TPC_PREAM_2GHZ_VHT40, 4138 WMI_TPC_PREAM_2GHZ_VHT80, 4139 }; 4140 4141 enum wmi_tpc_pream_5ghz { 4142 WMI_TPC_PREAM_5GHZ_OFDM = 1, 4143 WMI_TPC_PREAM_5GHZ_HT20, 4144 WMI_TPC_PREAM_5GHZ_HT40, 4145 WMI_TPC_PREAM_5GHZ_VHT20, 4146 WMI_TPC_PREAM_5GHZ_VHT40, 4147 WMI_TPC_PREAM_5GHZ_VHT80, 4148 WMI_TPC_PREAM_5GHZ_HTCUP, 4149 }; 4150 4151 struct wmi_pdev_chanlist_update_event { 4152 /* number of channels */ 4153 __le32 num_chan; 4154 /* array of channels */ 4155 struct wmi_channel channel_list[1]; 4156 } __packed; 4157 4158 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4159 4160 struct wmi_debug_mesg_event { 4161 /* message buffer, NULL terminated */ 4162 char bufp[WMI_MAX_DEBUG_MESG]; 4163 } __packed; 4164 4165 enum { 4166 /* P2P device */ 4167 VDEV_SUBTYPE_P2PDEV = 0, 4168 /* P2P client */ 4169 VDEV_SUBTYPE_P2PCLI, 4170 /* P2P GO */ 4171 VDEV_SUBTYPE_P2PGO, 4172 /* BT3.0 HS */ 4173 VDEV_SUBTYPE_BT, 4174 }; 4175 4176 struct wmi_pdev_set_channel_cmd { 4177 /* idnore power , only use flags , mode and freq */ 4178 struct wmi_channel chan; 4179 } __packed; 4180 4181 struct wmi_pdev_pktlog_enable_cmd { 4182 __le32 ev_bitmap; 4183 } __packed; 4184 4185 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4186 #define WMI_DSCP_MAP_MAX (64) 4187 struct wmi_pdev_set_dscp_tid_map_cmd { 4188 /* map indicating DSCP to TID conversion */ 4189 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4190 } __packed; 4191 4192 enum mcast_bcast_rate_id { 4193 WMI_SET_MCAST_RATE, 4194 WMI_SET_BCAST_RATE 4195 }; 4196 4197 struct mcast_bcast_rate { 4198 enum mcast_bcast_rate_id rate_id; 4199 __le32 rate; 4200 } __packed; 4201 4202 struct wmi_wmm_params { 4203 __le32 cwmin; 4204 __le32 cwmax; 4205 __le32 aifs; 4206 __le32 txop; 4207 __le32 acm; 4208 __le32 no_ack; 4209 } __packed; 4210 4211 struct wmi_pdev_set_wmm_params { 4212 struct wmi_wmm_params ac_be; 4213 struct wmi_wmm_params ac_bk; 4214 struct wmi_wmm_params ac_vi; 4215 struct wmi_wmm_params ac_vo; 4216 } __packed; 4217 4218 struct wmi_wmm_params_arg { 4219 u32 cwmin; 4220 u32 cwmax; 4221 u32 aifs; 4222 u32 txop; 4223 u32 acm; 4224 u32 no_ack; 4225 }; 4226 4227 struct wmi_wmm_params_all_arg { 4228 struct wmi_wmm_params_arg ac_be; 4229 struct wmi_wmm_params_arg ac_bk; 4230 struct wmi_wmm_params_arg ac_vi; 4231 struct wmi_wmm_params_arg ac_vo; 4232 }; 4233 4234 struct wmi_pdev_stats_tx { 4235 /* Num HTT cookies queued to dispatch list */ 4236 __le32 comp_queued; 4237 4238 /* Num HTT cookies dispatched */ 4239 __le32 comp_delivered; 4240 4241 /* Num MSDU queued to WAL */ 4242 __le32 msdu_enqued; 4243 4244 /* Num MPDU queue to WAL */ 4245 __le32 mpdu_enqued; 4246 4247 /* Num MSDUs dropped by WMM limit */ 4248 __le32 wmm_drop; 4249 4250 /* Num Local frames queued */ 4251 __le32 local_enqued; 4252 4253 /* Num Local frames done */ 4254 __le32 local_freed; 4255 4256 /* Num queued to HW */ 4257 __le32 hw_queued; 4258 4259 /* Num PPDU reaped from HW */ 4260 __le32 hw_reaped; 4261 4262 /* Num underruns */ 4263 __le32 underrun; 4264 4265 /* Num PPDUs cleaned up in TX abort */ 4266 __le32 tx_abort; 4267 4268 /* Num MPDUs requed by SW */ 4269 __le32 mpdus_requed; 4270 4271 /* excessive retries */ 4272 __le32 tx_ko; 4273 4274 /* data hw rate code */ 4275 __le32 data_rc; 4276 4277 /* Scheduler self triggers */ 4278 __le32 self_triggers; 4279 4280 /* frames dropped due to excessive sw retries */ 4281 __le32 sw_retry_failure; 4282 4283 /* illegal rate phy errors */ 4284 __le32 illgl_rate_phy_err; 4285 4286 /* wal pdev continuous xretry */ 4287 __le32 pdev_cont_xretry; 4288 4289 /* wal pdev continous xretry */ 4290 __le32 pdev_tx_timeout; 4291 4292 /* wal pdev resets */ 4293 __le32 pdev_resets; 4294 4295 /* frames dropped due to non-availability of stateless TIDs */ 4296 __le32 stateless_tid_alloc_failure; 4297 4298 __le32 phy_underrun; 4299 4300 /* MPDU is more than txop limit */ 4301 __le32 txop_ovf; 4302 } __packed; 4303 4304 struct wmi_10_4_pdev_stats_tx { 4305 /* Num HTT cookies queued to dispatch list */ 4306 __le32 comp_queued; 4307 4308 /* Num HTT cookies dispatched */ 4309 __le32 comp_delivered; 4310 4311 /* Num MSDU queued to WAL */ 4312 __le32 msdu_enqued; 4313 4314 /* Num MPDU queue to WAL */ 4315 __le32 mpdu_enqued; 4316 4317 /* Num MSDUs dropped by WMM limit */ 4318 __le32 wmm_drop; 4319 4320 /* Num Local frames queued */ 4321 __le32 local_enqued; 4322 4323 /* Num Local frames done */ 4324 __le32 local_freed; 4325 4326 /* Num queued to HW */ 4327 __le32 hw_queued; 4328 4329 /* Num PPDU reaped from HW */ 4330 __le32 hw_reaped; 4331 4332 /* Num underruns */ 4333 __le32 underrun; 4334 4335 /* HW Paused. */ 4336 __le32 hw_paused; 4337 4338 /* Num PPDUs cleaned up in TX abort */ 4339 __le32 tx_abort; 4340 4341 /* Num MPDUs requed by SW */ 4342 __le32 mpdus_requed; 4343 4344 /* excessive retries */ 4345 __le32 tx_ko; 4346 4347 /* data hw rate code */ 4348 __le32 data_rc; 4349 4350 /* Scheduler self triggers */ 4351 __le32 self_triggers; 4352 4353 /* frames dropped due to excessive sw retries */ 4354 __le32 sw_retry_failure; 4355 4356 /* illegal rate phy errors */ 4357 __le32 illgl_rate_phy_err; 4358 4359 /* wal pdev continuous xretry */ 4360 __le32 pdev_cont_xretry; 4361 4362 /* wal pdev tx timeouts */ 4363 __le32 pdev_tx_timeout; 4364 4365 /* wal pdev resets */ 4366 __le32 pdev_resets; 4367 4368 /* frames dropped due to non-availability of stateless TIDs */ 4369 __le32 stateless_tid_alloc_failure; 4370 4371 __le32 phy_underrun; 4372 4373 /* MPDU is more than txop limit */ 4374 __le32 txop_ovf; 4375 4376 /* Number of Sequences posted */ 4377 __le32 seq_posted; 4378 4379 /* Number of Sequences failed queueing */ 4380 __le32 seq_failed_queueing; 4381 4382 /* Number of Sequences completed */ 4383 __le32 seq_completed; 4384 4385 /* Number of Sequences restarted */ 4386 __le32 seq_restarted; 4387 4388 /* Number of MU Sequences posted */ 4389 __le32 mu_seq_posted; 4390 4391 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4392 __le32 mpdus_sw_flush; 4393 4394 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4395 __le32 mpdus_hw_filter; 4396 4397 /* Num MPDUs truncated by PDG 4398 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4399 */ 4400 __le32 mpdus_truncated; 4401 4402 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4403 __le32 mpdus_ack_failed; 4404 4405 /* Num MPDUs that was dropped due to expiry. */ 4406 __le32 mpdus_expired; 4407 } __packed; 4408 4409 struct wmi_pdev_stats_rx { 4410 /* Cnts any change in ring routing mid-ppdu */ 4411 __le32 mid_ppdu_route_change; 4412 4413 /* Total number of statuses processed */ 4414 __le32 status_rcvd; 4415 4416 /* Extra frags on rings 0-3 */ 4417 __le32 r0_frags; 4418 __le32 r1_frags; 4419 __le32 r2_frags; 4420 __le32 r3_frags; 4421 4422 /* MSDUs / MPDUs delivered to HTT */ 4423 __le32 htt_msdus; 4424 __le32 htt_mpdus; 4425 4426 /* MSDUs / MPDUs delivered to local stack */ 4427 __le32 loc_msdus; 4428 __le32 loc_mpdus; 4429 4430 /* AMSDUs that have more MSDUs than the status ring size */ 4431 __le32 oversize_amsdu; 4432 4433 /* Number of PHY errors */ 4434 __le32 phy_errs; 4435 4436 /* Number of PHY errors drops */ 4437 __le32 phy_err_drop; 4438 4439 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4440 __le32 mpdu_errs; 4441 } __packed; 4442 4443 struct wmi_pdev_stats_peer { 4444 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4445 __le32 dummy; 4446 } __packed; 4447 4448 enum wmi_stats_id { 4449 WMI_STAT_PEER = BIT(0), 4450 WMI_STAT_AP = BIT(1), 4451 WMI_STAT_PDEV = BIT(2), 4452 WMI_STAT_VDEV = BIT(3), 4453 WMI_STAT_BCNFLT = BIT(4), 4454 WMI_STAT_VDEV_RATE = BIT(5), 4455 }; 4456 4457 enum wmi_10_4_stats_id { 4458 WMI_10_4_STAT_PEER = BIT(0), 4459 WMI_10_4_STAT_AP = BIT(1), 4460 WMI_10_4_STAT_INST = BIT(2), 4461 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4462 WMI_10_4_STAT_VDEV_EXTD = BIT(4), 4463 }; 4464 4465 struct wlan_inst_rssi_args { 4466 __le16 cfg_retry_count; 4467 __le16 retry_count; 4468 }; 4469 4470 struct wmi_request_stats_cmd { 4471 __le32 stats_id; 4472 4473 __le32 vdev_id; 4474 4475 /* peer MAC address */ 4476 struct wmi_mac_addr peer_macaddr; 4477 4478 /* Instantaneous RSSI arguments */ 4479 struct wlan_inst_rssi_args inst_rssi_args; 4480 } __packed; 4481 4482 /* Suspend option */ 4483 enum { 4484 /* suspend */ 4485 WMI_PDEV_SUSPEND, 4486 4487 /* suspend and disable all interrupts */ 4488 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4489 }; 4490 4491 struct wmi_pdev_suspend_cmd { 4492 /* suspend option sent to target */ 4493 __le32 suspend_opt; 4494 } __packed; 4495 4496 struct wmi_stats_event { 4497 __le32 stats_id; /* WMI_STAT_ */ 4498 /* 4499 * number of pdev stats event structures 4500 * (wmi_pdev_stats) 0 or 1 4501 */ 4502 __le32 num_pdev_stats; 4503 /* 4504 * number of vdev stats event structures 4505 * (wmi_vdev_stats) 0 or max vdevs 4506 */ 4507 __le32 num_vdev_stats; 4508 /* 4509 * number of peer stats event structures 4510 * (wmi_peer_stats) 0 or max peers 4511 */ 4512 __le32 num_peer_stats; 4513 __le32 num_bcnflt_stats; 4514 /* 4515 * followed by 4516 * num_pdev_stats * size of(struct wmi_pdev_stats) 4517 * num_vdev_stats * size of(struct wmi_vdev_stats) 4518 * num_peer_stats * size of(struct wmi_peer_stats) 4519 * 4520 * By having a zero sized array, the pointer to data area 4521 * becomes available without increasing the struct size 4522 */ 4523 u8 data[0]; 4524 } __packed; 4525 4526 struct wmi_10_2_stats_event { 4527 __le32 stats_id; /* %WMI_REQUEST_ */ 4528 __le32 num_pdev_stats; 4529 __le32 num_pdev_ext_stats; 4530 __le32 num_vdev_stats; 4531 __le32 num_peer_stats; 4532 __le32 num_bcnflt_stats; 4533 u8 data[0]; 4534 } __packed; 4535 4536 /* 4537 * PDEV statistics 4538 * TODO: add all PDEV stats here 4539 */ 4540 struct wmi_pdev_stats_base { 4541 __le32 chan_nf; 4542 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4543 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4544 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4545 __le32 cycle_count; /* Total on-channel time */ 4546 __le32 phy_err_count; 4547 __le32 chan_tx_pwr; 4548 } __packed; 4549 4550 struct wmi_pdev_stats { 4551 struct wmi_pdev_stats_base base; 4552 struct wmi_pdev_stats_tx tx; 4553 struct wmi_pdev_stats_rx rx; 4554 struct wmi_pdev_stats_peer peer; 4555 } __packed; 4556 4557 struct wmi_pdev_stats_extra { 4558 __le32 ack_rx_bad; 4559 __le32 rts_bad; 4560 __le32 rts_good; 4561 __le32 fcs_bad; 4562 __le32 no_beacons; 4563 __le32 mib_int_count; 4564 } __packed; 4565 4566 struct wmi_10x_pdev_stats { 4567 struct wmi_pdev_stats_base base; 4568 struct wmi_pdev_stats_tx tx; 4569 struct wmi_pdev_stats_rx rx; 4570 struct wmi_pdev_stats_peer peer; 4571 struct wmi_pdev_stats_extra extra; 4572 } __packed; 4573 4574 struct wmi_pdev_stats_mem { 4575 __le32 dram_free; 4576 __le32 iram_free; 4577 } __packed; 4578 4579 struct wmi_10_2_pdev_stats { 4580 struct wmi_pdev_stats_base base; 4581 struct wmi_pdev_stats_tx tx; 4582 __le32 mc_drop; 4583 struct wmi_pdev_stats_rx rx; 4584 __le32 pdev_rx_timeout; 4585 struct wmi_pdev_stats_mem mem; 4586 struct wmi_pdev_stats_peer peer; 4587 struct wmi_pdev_stats_extra extra; 4588 } __packed; 4589 4590 struct wmi_10_4_pdev_stats { 4591 struct wmi_pdev_stats_base base; 4592 struct wmi_10_4_pdev_stats_tx tx; 4593 struct wmi_pdev_stats_rx rx; 4594 __le32 rx_ovfl_errs; 4595 struct wmi_pdev_stats_mem mem; 4596 __le32 sram_free_size; 4597 struct wmi_pdev_stats_extra extra; 4598 } __packed; 4599 4600 /* 4601 * VDEV statistics 4602 */ 4603 4604 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) 4605 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 4606 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff 4607 4608 struct wmi_vdev_stats { 4609 __le32 vdev_id; 4610 } __packed; 4611 4612 struct wmi_vdev_stats_extd { 4613 __le32 vdev_id; 4614 __le32 ppdu_aggr_cnt; 4615 __le32 ppdu_noack; 4616 __le32 mpdu_queued; 4617 __le32 ppdu_nonaggr_cnt; 4618 __le32 mpdu_sw_requeued; 4619 __le32 mpdu_suc_retry; 4620 __le32 mpdu_suc_multitry; 4621 __le32 mpdu_fail_retry; 4622 __le32 tx_ftm_suc; 4623 __le32 tx_ftm_suc_retry; 4624 __le32 tx_ftm_fail; 4625 __le32 rx_ftmr_cnt; 4626 __le32 rx_ftmr_dup_cnt; 4627 __le32 rx_iftmr_cnt; 4628 __le32 rx_iftmr_dup_cnt; 4629 __le32 reserved[6]; 4630 } __packed; 4631 4632 /* 4633 * peer statistics. 4634 * TODO: add more stats 4635 */ 4636 struct wmi_peer_stats { 4637 struct wmi_mac_addr peer_macaddr; 4638 __le32 peer_rssi; 4639 __le32 peer_tx_rate; 4640 } __packed; 4641 4642 struct wmi_10x_peer_stats { 4643 struct wmi_peer_stats old; 4644 __le32 peer_rx_rate; 4645 } __packed; 4646 4647 struct wmi_10_2_peer_stats { 4648 struct wmi_peer_stats old; 4649 __le32 peer_rx_rate; 4650 __le32 current_per; 4651 __le32 retries; 4652 __le32 tx_rate_count; 4653 __le32 max_4ms_frame_len; 4654 __le32 total_sub_frames; 4655 __le32 tx_bytes; 4656 __le32 num_pkt_loss_overflow[4]; 4657 __le32 num_pkt_loss_excess_retry[4]; 4658 } __packed; 4659 4660 struct wmi_10_2_4_peer_stats { 4661 struct wmi_10_2_peer_stats common; 4662 __le32 peer_rssi_changed; 4663 } __packed; 4664 4665 struct wmi_10_2_4_ext_peer_stats { 4666 struct wmi_10_2_peer_stats common; 4667 __le32 peer_rssi_changed; 4668 __le32 rx_duration; 4669 } __packed; 4670 4671 struct wmi_10_4_peer_stats { 4672 struct wmi_mac_addr peer_macaddr; 4673 __le32 peer_rssi; 4674 __le32 peer_rssi_seq_num; 4675 __le32 peer_tx_rate; 4676 __le32 peer_rx_rate; 4677 __le32 current_per; 4678 __le32 retries; 4679 __le32 tx_rate_count; 4680 __le32 max_4ms_frame_len; 4681 __le32 total_sub_frames; 4682 __le32 tx_bytes; 4683 __le32 num_pkt_loss_overflow[4]; 4684 __le32 num_pkt_loss_excess_retry[4]; 4685 __le32 peer_rssi_changed; 4686 } __packed; 4687 4688 struct wmi_10_4_peer_extd_stats { 4689 struct wmi_mac_addr peer_macaddr; 4690 __le32 inactive_time; 4691 __le32 peer_chain_rssi; 4692 __le32 rx_duration; 4693 __le32 reserved[10]; 4694 } __packed; 4695 4696 struct wmi_10_4_bss_bcn_stats { 4697 __le32 vdev_id; 4698 __le32 bss_bcns_dropped; 4699 __le32 bss_bcn_delivered; 4700 } __packed; 4701 4702 struct wmi_10_4_bss_bcn_filter_stats { 4703 __le32 bcns_dropped; 4704 __le32 bcns_delivered; 4705 __le32 active_filters; 4706 struct wmi_10_4_bss_bcn_stats bss_stats; 4707 } __packed; 4708 4709 struct wmi_10_2_pdev_ext_stats { 4710 __le32 rx_rssi_comb; 4711 __le32 rx_rssi[4]; 4712 __le32 rx_mcs[10]; 4713 __le32 tx_mcs[10]; 4714 __le32 ack_rssi; 4715 } __packed; 4716 4717 struct wmi_vdev_create_cmd { 4718 __le32 vdev_id; 4719 __le32 vdev_type; 4720 __le32 vdev_subtype; 4721 struct wmi_mac_addr vdev_macaddr; 4722 } __packed; 4723 4724 enum wmi_vdev_type { 4725 WMI_VDEV_TYPE_AP = 1, 4726 WMI_VDEV_TYPE_STA = 2, 4727 WMI_VDEV_TYPE_IBSS = 3, 4728 WMI_VDEV_TYPE_MONITOR = 4, 4729 }; 4730 4731 enum wmi_vdev_subtype { 4732 WMI_VDEV_SUBTYPE_NONE, 4733 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4734 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4735 WMI_VDEV_SUBTYPE_P2P_GO, 4736 WMI_VDEV_SUBTYPE_PROXY_STA, 4737 WMI_VDEV_SUBTYPE_MESH_11S, 4738 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4739 }; 4740 4741 enum wmi_vdev_subtype_legacy { 4742 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4743 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4744 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4745 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4746 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4747 }; 4748 4749 enum wmi_vdev_subtype_10_2_4 { 4750 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4751 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4752 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4753 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4754 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4755 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4756 }; 4757 4758 enum wmi_vdev_subtype_10_4 { 4759 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4760 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4761 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4762 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4763 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4764 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4765 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4766 }; 4767 4768 /* values for vdev_subtype */ 4769 4770 /* values for vdev_start_request flags */ 4771 /* 4772 * Indicates that AP VDEV uses hidden ssid. only valid for 4773 * AP/GO 4774 */ 4775 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4776 /* 4777 * Indicates if robust management frame/management frame 4778 * protection is enabled. For GO/AP vdevs, it indicates that 4779 * it may support station/client associations with RMF enabled. 4780 * For STA/client vdevs, it indicates that sta will 4781 * associate with AP with RMF enabled. 4782 */ 4783 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4784 4785 struct wmi_p2p_noa_descriptor { 4786 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4787 __le32 duration; /* Absent period duration in micro seconds */ 4788 __le32 interval; /* Absent period interval in micro seconds */ 4789 __le32 start_time; /* 32 bit tsf time when in starts */ 4790 } __packed; 4791 4792 struct wmi_vdev_start_request_cmd { 4793 /* WMI channel */ 4794 struct wmi_channel chan; 4795 /* unique id identifying the VDEV, generated by the caller */ 4796 __le32 vdev_id; 4797 /* requestor id identifying the caller module */ 4798 __le32 requestor_id; 4799 /* beacon interval from received beacon */ 4800 __le32 beacon_interval; 4801 /* DTIM Period from the received beacon */ 4802 __le32 dtim_period; 4803 /* Flags */ 4804 __le32 flags; 4805 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4806 struct wmi_ssid ssid; 4807 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4808 __le32 bcn_tx_rate; 4809 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4810 __le32 bcn_tx_power; 4811 /* number of p2p NOA descriptor(s) from scan entry */ 4812 __le32 num_noa_descriptors; 4813 /* 4814 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4815 * During CAC, Our HW shouldn't ack ditected frames 4816 */ 4817 __le32 disable_hw_ack; 4818 /* actual p2p NOA descriptor from scan entry */ 4819 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4820 } __packed; 4821 4822 struct wmi_vdev_restart_request_cmd { 4823 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4824 } __packed; 4825 4826 struct wmi_vdev_start_request_arg { 4827 u32 vdev_id; 4828 struct wmi_channel_arg channel; 4829 u32 bcn_intval; 4830 u32 dtim_period; 4831 u8 *ssid; 4832 u32 ssid_len; 4833 u32 bcn_tx_rate; 4834 u32 bcn_tx_power; 4835 bool disable_hw_ack; 4836 bool hidden_ssid; 4837 bool pmf_enabled; 4838 }; 4839 4840 struct wmi_vdev_delete_cmd { 4841 /* unique id identifying the VDEV, generated by the caller */ 4842 __le32 vdev_id; 4843 } __packed; 4844 4845 struct wmi_vdev_up_cmd { 4846 __le32 vdev_id; 4847 __le32 vdev_assoc_id; 4848 struct wmi_mac_addr vdev_bssid; 4849 } __packed; 4850 4851 struct wmi_vdev_stop_cmd { 4852 __le32 vdev_id; 4853 } __packed; 4854 4855 struct wmi_vdev_down_cmd { 4856 __le32 vdev_id; 4857 } __packed; 4858 4859 struct wmi_vdev_standby_response_cmd { 4860 /* unique id identifying the VDEV, generated by the caller */ 4861 __le32 vdev_id; 4862 } __packed; 4863 4864 struct wmi_vdev_resume_response_cmd { 4865 /* unique id identifying the VDEV, generated by the caller */ 4866 __le32 vdev_id; 4867 } __packed; 4868 4869 struct wmi_vdev_set_param_cmd { 4870 __le32 vdev_id; 4871 __le32 param_id; 4872 __le32 param_value; 4873 } __packed; 4874 4875 #define WMI_MAX_KEY_INDEX 3 4876 #define WMI_MAX_KEY_LEN 32 4877 4878 #define WMI_KEY_PAIRWISE 0x00 4879 #define WMI_KEY_GROUP 0x01 4880 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4881 4882 struct wmi_key_seq_counter { 4883 __le32 key_seq_counter_l; 4884 __le32 key_seq_counter_h; 4885 } __packed; 4886 4887 #define WMI_CIPHER_NONE 0x0 /* clear key */ 4888 #define WMI_CIPHER_WEP 0x1 4889 #define WMI_CIPHER_TKIP 0x2 4890 #define WMI_CIPHER_AES_OCB 0x3 4891 #define WMI_CIPHER_AES_CCM 0x4 4892 #define WMI_CIPHER_WAPI 0x5 4893 #define WMI_CIPHER_CKIP 0x6 4894 #define WMI_CIPHER_AES_CMAC 0x7 4895 #define WMI_CIPHER_AES_GCM 0x8 4896 4897 struct wmi_vdev_install_key_cmd { 4898 __le32 vdev_id; 4899 struct wmi_mac_addr peer_macaddr; 4900 __le32 key_idx; 4901 __le32 key_flags; 4902 __le32 key_cipher; /* %WMI_CIPHER_ */ 4903 struct wmi_key_seq_counter key_rsc_counter; 4904 struct wmi_key_seq_counter key_global_rsc_counter; 4905 struct wmi_key_seq_counter key_tsc_counter; 4906 u8 wpi_key_rsc_counter[16]; 4907 u8 wpi_key_tsc_counter[16]; 4908 __le32 key_len; 4909 __le32 key_txmic_len; 4910 __le32 key_rxmic_len; 4911 4912 /* contains key followed by tx mic followed by rx mic */ 4913 u8 key_data[0]; 4914 } __packed; 4915 4916 struct wmi_vdev_install_key_arg { 4917 u32 vdev_id; 4918 const u8 *macaddr; 4919 u32 key_idx; 4920 u32 key_flags; 4921 u32 key_cipher; 4922 u32 key_len; 4923 u32 key_txmic_len; 4924 u32 key_rxmic_len; 4925 const void *key_data; 4926 }; 4927 4928 /* 4929 * vdev fixed rate format: 4930 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 4931 * - nss - b5:b4 - ss number (0 mean 1ss) 4932 * - rate_mcs - b3:b0 - as below 4933 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 4934 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 4935 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 4936 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 4937 * HT/VHT: MCS index 4938 */ 4939 4940 /* Preamble types to be used with VDEV fixed rate configuration */ 4941 enum wmi_rate_preamble { 4942 WMI_RATE_PREAMBLE_OFDM, 4943 WMI_RATE_PREAMBLE_CCK, 4944 WMI_RATE_PREAMBLE_HT, 4945 WMI_RATE_PREAMBLE_VHT, 4946 }; 4947 4948 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 4949 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 4950 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 4951 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 4952 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 4953 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 4954 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 4955 (((preamble) << 6) | ((nss) << 4) | (rate)) 4956 4957 #define VHT_MCS_NUM 10 4958 #define VHT_BW_NUM 4 4959 #define VHT_NSS_NUM 4 4960 4961 /* Value to disable fixed rate setting */ 4962 #define WMI_FIXED_RATE_NONE (0xff) 4963 4964 struct wmi_vdev_param_map { 4965 u32 rts_threshold; 4966 u32 fragmentation_threshold; 4967 u32 beacon_interval; 4968 u32 listen_interval; 4969 u32 multicast_rate; 4970 u32 mgmt_tx_rate; 4971 u32 slot_time; 4972 u32 preamble; 4973 u32 swba_time; 4974 u32 wmi_vdev_stats_update_period; 4975 u32 wmi_vdev_pwrsave_ageout_time; 4976 u32 wmi_vdev_host_swba_interval; 4977 u32 dtim_period; 4978 u32 wmi_vdev_oc_scheduler_air_time_limit; 4979 u32 wds; 4980 u32 atim_window; 4981 u32 bmiss_count_max; 4982 u32 bmiss_first_bcnt; 4983 u32 bmiss_final_bcnt; 4984 u32 feature_wmm; 4985 u32 chwidth; 4986 u32 chextoffset; 4987 u32 disable_htprotection; 4988 u32 sta_quickkickout; 4989 u32 mgmt_rate; 4990 u32 protection_mode; 4991 u32 fixed_rate; 4992 u32 sgi; 4993 u32 ldpc; 4994 u32 tx_stbc; 4995 u32 rx_stbc; 4996 u32 intra_bss_fwd; 4997 u32 def_keyid; 4998 u32 nss; 4999 u32 bcast_data_rate; 5000 u32 mcast_data_rate; 5001 u32 mcast_indicate; 5002 u32 dhcp_indicate; 5003 u32 unknown_dest_indicate; 5004 u32 ap_keepalive_min_idle_inactive_time_secs; 5005 u32 ap_keepalive_max_idle_inactive_time_secs; 5006 u32 ap_keepalive_max_unresponsive_time_secs; 5007 u32 ap_enable_nawds; 5008 u32 mcast2ucast_set; 5009 u32 enable_rtscts; 5010 u32 txbf; 5011 u32 packet_powersave; 5012 u32 drop_unencry; 5013 u32 tx_encap_type; 5014 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 5015 u32 rc_num_retries; 5016 u32 cabq_maxdur; 5017 u32 mfptest_set; 5018 u32 rts_fixed_rate; 5019 u32 vht_sgimask; 5020 u32 vht80_ratemask; 5021 u32 early_rx_adjust_enable; 5022 u32 early_rx_tgt_bmiss_num; 5023 u32 early_rx_bmiss_sample_cycle; 5024 u32 early_rx_slop_step; 5025 u32 early_rx_init_slop; 5026 u32 early_rx_adjust_pause; 5027 u32 proxy_sta; 5028 u32 meru_vc; 5029 u32 rx_decap_type; 5030 u32 bw_nss_ratemask; 5031 u32 inc_tsf; 5032 u32 dec_tsf; 5033 }; 5034 5035 #define WMI_VDEV_PARAM_UNSUPPORTED 0 5036 5037 /* the definition of different VDEV parameters */ 5038 enum wmi_vdev_param { 5039 /* RTS Threshold */ 5040 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5041 /* Fragmentation threshold */ 5042 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5043 /* beacon interval in TUs */ 5044 WMI_VDEV_PARAM_BEACON_INTERVAL, 5045 /* Listen interval in TUs */ 5046 WMI_VDEV_PARAM_LISTEN_INTERVAL, 5047 /* multicast rate in Mbps */ 5048 WMI_VDEV_PARAM_MULTICAST_RATE, 5049 /* management frame rate in Mbps */ 5050 WMI_VDEV_PARAM_MGMT_TX_RATE, 5051 /* slot time (long vs short) */ 5052 WMI_VDEV_PARAM_SLOT_TIME, 5053 /* preamble (long vs short) */ 5054 WMI_VDEV_PARAM_PREAMBLE, 5055 /* SWBA time (time before tbtt in msec) */ 5056 WMI_VDEV_PARAM_SWBA_TIME, 5057 /* time period for updating VDEV stats */ 5058 WMI_VDEV_STATS_UPDATE_PERIOD, 5059 /* age out time in msec for frames queued for station in power save */ 5060 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 5061 /* 5062 * Host SWBA interval (time in msec before tbtt for SWBA event 5063 * generation). 5064 */ 5065 WMI_VDEV_HOST_SWBA_INTERVAL, 5066 /* DTIM period (specified in units of num beacon intervals) */ 5067 WMI_VDEV_PARAM_DTIM_PERIOD, 5068 /* 5069 * scheduler air time limit for this VDEV. used by off chan 5070 * scheduler. 5071 */ 5072 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5073 /* enable/dsiable WDS for this VDEV */ 5074 WMI_VDEV_PARAM_WDS, 5075 /* ATIM Window */ 5076 WMI_VDEV_PARAM_ATIM_WINDOW, 5077 /* BMISS max */ 5078 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 5079 /* BMISS first time */ 5080 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 5081 /* BMISS final time */ 5082 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 5083 /* WMM enables/disabled */ 5084 WMI_VDEV_PARAM_FEATURE_WMM, 5085 /* Channel width */ 5086 WMI_VDEV_PARAM_CHWIDTH, 5087 /* Channel Offset */ 5088 WMI_VDEV_PARAM_CHEXTOFFSET, 5089 /* Disable HT Protection */ 5090 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 5091 /* Quick STA Kickout */ 5092 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 5093 /* Rate to be used with Management frames */ 5094 WMI_VDEV_PARAM_MGMT_RATE, 5095 /* Protection Mode */ 5096 WMI_VDEV_PARAM_PROTECTION_MODE, 5097 /* Fixed rate setting */ 5098 WMI_VDEV_PARAM_FIXED_RATE, 5099 /* Short GI Enable/Disable */ 5100 WMI_VDEV_PARAM_SGI, 5101 /* Enable LDPC */ 5102 WMI_VDEV_PARAM_LDPC, 5103 /* Enable Tx STBC */ 5104 WMI_VDEV_PARAM_TX_STBC, 5105 /* Enable Rx STBC */ 5106 WMI_VDEV_PARAM_RX_STBC, 5107 /* Intra BSS forwarding */ 5108 WMI_VDEV_PARAM_INTRA_BSS_FWD, 5109 /* Setting Default xmit key for Vdev */ 5110 WMI_VDEV_PARAM_DEF_KEYID, 5111 /* NSS width */ 5112 WMI_VDEV_PARAM_NSS, 5113 /* Set the custom rate for the broadcast data frames */ 5114 WMI_VDEV_PARAM_BCAST_DATA_RATE, 5115 /* Set the custom rate (rate-code) for multicast data frames */ 5116 WMI_VDEV_PARAM_MCAST_DATA_RATE, 5117 /* Tx multicast packet indicate Enable/Disable */ 5118 WMI_VDEV_PARAM_MCAST_INDICATE, 5119 /* Tx DHCP packet indicate Enable/Disable */ 5120 WMI_VDEV_PARAM_DHCP_INDICATE, 5121 /* Enable host inspection of Tx unicast packet to unknown destination */ 5122 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5123 5124 /* The minimum amount of time AP begins to consider STA inactive */ 5125 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5126 5127 /* 5128 * An associated STA is considered inactive when there is no recent 5129 * TX/RX activity and no downlink frames are buffered for it. Once a 5130 * STA exceeds the maximum idle inactive time, the AP will send an 5131 * 802.11 data-null as a keep alive to verify the STA is still 5132 * associated. If the STA does ACK the data-null, or if the data-null 5133 * is buffered and the STA does not retrieve it, the STA will be 5134 * considered unresponsive 5135 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5136 */ 5137 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5138 5139 /* 5140 * An associated STA is considered unresponsive if there is no recent 5141 * TX/RX activity and downlink frames are buffered for it. Once a STA 5142 * exceeds the maximum unresponsive time, the AP will send a 5143 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5144 */ 5145 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5146 5147 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5148 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5149 /* Enable/Disable RTS-CTS */ 5150 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5151 /* Enable TXBFee/er */ 5152 WMI_VDEV_PARAM_TXBF, 5153 5154 /* Set packet power save */ 5155 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5156 5157 /* 5158 * Drops un-encrypted packets if eceived in an encrypted connection 5159 * otherwise forwards to host. 5160 */ 5161 WMI_VDEV_PARAM_DROP_UNENCRY, 5162 5163 /* 5164 * Set the encapsulation type for frames. 5165 */ 5166 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5167 }; 5168 5169 /* the definition of different VDEV parameters */ 5170 enum wmi_10x_vdev_param { 5171 /* RTS Threshold */ 5172 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5173 /* Fragmentation threshold */ 5174 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5175 /* beacon interval in TUs */ 5176 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5177 /* Listen interval in TUs */ 5178 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5179 /* multicast rate in Mbps */ 5180 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5181 /* management frame rate in Mbps */ 5182 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5183 /* slot time (long vs short) */ 5184 WMI_10X_VDEV_PARAM_SLOT_TIME, 5185 /* preamble (long vs short) */ 5186 WMI_10X_VDEV_PARAM_PREAMBLE, 5187 /* SWBA time (time before tbtt in msec) */ 5188 WMI_10X_VDEV_PARAM_SWBA_TIME, 5189 /* time period for updating VDEV stats */ 5190 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5191 /* age out time in msec for frames queued for station in power save */ 5192 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5193 /* 5194 * Host SWBA interval (time in msec before tbtt for SWBA event 5195 * generation). 5196 */ 5197 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5198 /* DTIM period (specified in units of num beacon intervals) */ 5199 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5200 /* 5201 * scheduler air time limit for this VDEV. used by off chan 5202 * scheduler. 5203 */ 5204 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5205 /* enable/dsiable WDS for this VDEV */ 5206 WMI_10X_VDEV_PARAM_WDS, 5207 /* ATIM Window */ 5208 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5209 /* BMISS max */ 5210 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5211 /* WMM enables/disabled */ 5212 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5213 /* Channel width */ 5214 WMI_10X_VDEV_PARAM_CHWIDTH, 5215 /* Channel Offset */ 5216 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5217 /* Disable HT Protection */ 5218 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5219 /* Quick STA Kickout */ 5220 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5221 /* Rate to be used with Management frames */ 5222 WMI_10X_VDEV_PARAM_MGMT_RATE, 5223 /* Protection Mode */ 5224 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5225 /* Fixed rate setting */ 5226 WMI_10X_VDEV_PARAM_FIXED_RATE, 5227 /* Short GI Enable/Disable */ 5228 WMI_10X_VDEV_PARAM_SGI, 5229 /* Enable LDPC */ 5230 WMI_10X_VDEV_PARAM_LDPC, 5231 /* Enable Tx STBC */ 5232 WMI_10X_VDEV_PARAM_TX_STBC, 5233 /* Enable Rx STBC */ 5234 WMI_10X_VDEV_PARAM_RX_STBC, 5235 /* Intra BSS forwarding */ 5236 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5237 /* Setting Default xmit key for Vdev */ 5238 WMI_10X_VDEV_PARAM_DEF_KEYID, 5239 /* NSS width */ 5240 WMI_10X_VDEV_PARAM_NSS, 5241 /* Set the custom rate for the broadcast data frames */ 5242 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5243 /* Set the custom rate (rate-code) for multicast data frames */ 5244 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5245 /* Tx multicast packet indicate Enable/Disable */ 5246 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5247 /* Tx DHCP packet indicate Enable/Disable */ 5248 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5249 /* Enable host inspection of Tx unicast packet to unknown destination */ 5250 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5251 5252 /* The minimum amount of time AP begins to consider STA inactive */ 5253 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5254 5255 /* 5256 * An associated STA is considered inactive when there is no recent 5257 * TX/RX activity and no downlink frames are buffered for it. Once a 5258 * STA exceeds the maximum idle inactive time, the AP will send an 5259 * 802.11 data-null as a keep alive to verify the STA is still 5260 * associated. If the STA does ACK the data-null, or if the data-null 5261 * is buffered and the STA does not retrieve it, the STA will be 5262 * considered unresponsive 5263 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5264 */ 5265 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5266 5267 /* 5268 * An associated STA is considered unresponsive if there is no recent 5269 * TX/RX activity and downlink frames are buffered for it. Once a STA 5270 * exceeds the maximum unresponsive time, the AP will send a 5271 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5272 */ 5273 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5274 5275 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5276 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5277 5278 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5279 /* Enable/Disable RTS-CTS */ 5280 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5281 5282 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5283 5284 /* following are available as of firmware 10.2 */ 5285 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5286 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5287 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5288 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5289 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5290 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5291 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5292 }; 5293 5294 enum wmi_10_4_vdev_param { 5295 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5296 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5297 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5298 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5299 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5300 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5301 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5302 WMI_10_4_VDEV_PARAM_PREAMBLE, 5303 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5304 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5305 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5306 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5307 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5308 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5309 WMI_10_4_VDEV_PARAM_WDS, 5310 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5311 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5312 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5313 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5314 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5315 WMI_10_4_VDEV_PARAM_CHWIDTH, 5316 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5317 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5318 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5319 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5320 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5321 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5322 WMI_10_4_VDEV_PARAM_SGI, 5323 WMI_10_4_VDEV_PARAM_LDPC, 5324 WMI_10_4_VDEV_PARAM_TX_STBC, 5325 WMI_10_4_VDEV_PARAM_RX_STBC, 5326 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5327 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5328 WMI_10_4_VDEV_PARAM_NSS, 5329 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5330 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5331 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5332 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5333 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5334 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5335 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5336 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5337 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5338 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5339 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5340 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5341 WMI_10_4_VDEV_PARAM_TXBF, 5342 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5343 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5344 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5345 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5346 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5347 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5348 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5349 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5350 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5351 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5352 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5353 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5354 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5355 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5356 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5357 WMI_10_4_VDEV_PARAM_PROXY_STA, 5358 WMI_10_4_VDEV_PARAM_MERU_VC, 5359 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5360 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5361 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5362 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5363 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5364 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5365 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5366 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5367 WMI_10_4_VDEV_PARAM_RX_FILTER, 5368 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5369 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5370 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5371 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5372 }; 5373 5374 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5375 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5376 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5377 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5378 5379 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5380 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5381 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5382 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5383 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5384 5385 /* slot time long */ 5386 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5387 /* slot time short */ 5388 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5389 /* preablbe long */ 5390 #define WMI_VDEV_PREAMBLE_LONG 0x1 5391 /* preablbe short */ 5392 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5393 5394 enum wmi_start_event_param { 5395 WMI_VDEV_RESP_START_EVENT = 0, 5396 WMI_VDEV_RESP_RESTART_EVENT, 5397 }; 5398 5399 struct wmi_vdev_start_response_event { 5400 __le32 vdev_id; 5401 __le32 req_id; 5402 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5403 __le32 status; 5404 } __packed; 5405 5406 struct wmi_vdev_standby_req_event { 5407 /* unique id identifying the VDEV, generated by the caller */ 5408 __le32 vdev_id; 5409 } __packed; 5410 5411 struct wmi_vdev_resume_req_event { 5412 /* unique id identifying the VDEV, generated by the caller */ 5413 __le32 vdev_id; 5414 } __packed; 5415 5416 struct wmi_vdev_stopped_event { 5417 /* unique id identifying the VDEV, generated by the caller */ 5418 __le32 vdev_id; 5419 } __packed; 5420 5421 /* 5422 * common structure used for simple events 5423 * (stopped, resume_req, standby response) 5424 */ 5425 struct wmi_vdev_simple_event { 5426 /* unique id identifying the VDEV, generated by the caller */ 5427 __le32 vdev_id; 5428 } __packed; 5429 5430 /* VDEV start response status codes */ 5431 /* VDEV successfully started */ 5432 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5433 5434 /* requested VDEV not found */ 5435 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5436 5437 /* unsupported VDEV combination */ 5438 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5439 5440 /* TODO: please add more comments if you have in-depth information */ 5441 struct wmi_vdev_spectral_conf_cmd { 5442 __le32 vdev_id; 5443 5444 /* number of fft samples to send (0 for infinite) */ 5445 __le32 scan_count; 5446 __le32 scan_period; 5447 __le32 scan_priority; 5448 5449 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5450 __le32 scan_fft_size; 5451 __le32 scan_gc_ena; 5452 __le32 scan_restart_ena; 5453 __le32 scan_noise_floor_ref; 5454 __le32 scan_init_delay; 5455 __le32 scan_nb_tone_thr; 5456 __le32 scan_str_bin_thr; 5457 __le32 scan_wb_rpt_mode; 5458 __le32 scan_rssi_rpt_mode; 5459 __le32 scan_rssi_thr; 5460 __le32 scan_pwr_format; 5461 5462 /* rpt_mode: Format of FFT report to software for spectral scan 5463 * triggered FFTs: 5464 * 0: No FFT report (only spectral scan summary report) 5465 * 1: 2-dword summary of metrics for each completed FFT + spectral 5466 * scan summary report 5467 * 2: 2-dword summary of metrics for each completed FFT + 5468 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5469 * report 5470 * 3: 2-dword summary of metrics for each completed FFT + 5471 * 2x- oversampled bins (all) per FFT + spectral scan summary 5472 */ 5473 __le32 scan_rpt_mode; 5474 __le32 scan_bin_scale; 5475 __le32 scan_dbm_adj; 5476 __le32 scan_chn_mask; 5477 } __packed; 5478 5479 struct wmi_vdev_spectral_conf_arg { 5480 u32 vdev_id; 5481 u32 scan_count; 5482 u32 scan_period; 5483 u32 scan_priority; 5484 u32 scan_fft_size; 5485 u32 scan_gc_ena; 5486 u32 scan_restart_ena; 5487 u32 scan_noise_floor_ref; 5488 u32 scan_init_delay; 5489 u32 scan_nb_tone_thr; 5490 u32 scan_str_bin_thr; 5491 u32 scan_wb_rpt_mode; 5492 u32 scan_rssi_rpt_mode; 5493 u32 scan_rssi_thr; 5494 u32 scan_pwr_format; 5495 u32 scan_rpt_mode; 5496 u32 scan_bin_scale; 5497 u32 scan_dbm_adj; 5498 u32 scan_chn_mask; 5499 }; 5500 5501 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5502 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5503 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5504 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5505 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5506 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5507 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5508 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5509 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5510 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5511 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5512 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5513 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5514 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5515 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5516 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5517 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5518 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5519 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5520 5521 struct wmi_vdev_spectral_enable_cmd { 5522 __le32 vdev_id; 5523 __le32 trigger_cmd; 5524 __le32 enable_cmd; 5525 } __packed; 5526 5527 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5528 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5529 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5530 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5531 5532 /* Beacon processing related command and event structures */ 5533 struct wmi_bcn_tx_hdr { 5534 __le32 vdev_id; 5535 __le32 tx_rate; 5536 __le32 tx_power; 5537 __le32 bcn_len; 5538 } __packed; 5539 5540 struct wmi_bcn_tx_cmd { 5541 struct wmi_bcn_tx_hdr hdr; 5542 u8 *bcn[0]; 5543 } __packed; 5544 5545 struct wmi_bcn_tx_arg { 5546 u32 vdev_id; 5547 u32 tx_rate; 5548 u32 tx_power; 5549 u32 bcn_len; 5550 const void *bcn; 5551 }; 5552 5553 enum wmi_bcn_tx_ref_flags { 5554 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5555 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5556 }; 5557 5558 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5559 * chainmask yields no beacons on the air at all. 5560 */ 5561 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5562 5563 struct wmi_bcn_tx_ref_cmd { 5564 __le32 vdev_id; 5565 __le32 data_len; 5566 /* physical address of the frame - dma pointer */ 5567 __le32 data_ptr; 5568 /* id for host to track */ 5569 __le32 msdu_id; 5570 /* frame ctrl to setup PPDU desc */ 5571 __le32 frame_control; 5572 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5573 __le32 flags; 5574 /* introduced in 10.2 */ 5575 __le32 antenna_mask; 5576 } __packed; 5577 5578 /* Beacon filter */ 5579 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5580 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5581 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5582 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5583 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5584 5585 struct wmi_bcn_filter_rx_cmd { 5586 /* Filter ID */ 5587 __le32 bcn_filter_id; 5588 /* Filter type - wmi_bcn_filter */ 5589 __le32 bcn_filter; 5590 /* Buffer len */ 5591 __le32 bcn_filter_len; 5592 /* Filter info (threshold, BSSID, RSSI) */ 5593 u8 *bcn_filter_buf; 5594 } __packed; 5595 5596 /* Capabilities and IEs to be passed to firmware */ 5597 struct wmi_bcn_prb_info { 5598 /* Capabilities */ 5599 __le32 caps; 5600 /* ERP info */ 5601 __le32 erp; 5602 /* Advanced capabilities */ 5603 /* HT capabilities */ 5604 /* HT Info */ 5605 /* ibss_dfs */ 5606 /* wpa Info */ 5607 /* rsn Info */ 5608 /* rrm info */ 5609 /* ath_ext */ 5610 /* app IE */ 5611 } __packed; 5612 5613 struct wmi_bcn_tmpl_cmd { 5614 /* unique id identifying the VDEV, generated by the caller */ 5615 __le32 vdev_id; 5616 /* TIM IE offset from the beginning of the template. */ 5617 __le32 tim_ie_offset; 5618 /* beacon probe capabilities and IEs */ 5619 struct wmi_bcn_prb_info bcn_prb_info; 5620 /* beacon buffer length */ 5621 __le32 buf_len; 5622 /* variable length data */ 5623 u8 data[1]; 5624 } __packed; 5625 5626 struct wmi_prb_tmpl_cmd { 5627 /* unique id identifying the VDEV, generated by the caller */ 5628 __le32 vdev_id; 5629 /* beacon probe capabilities and IEs */ 5630 struct wmi_bcn_prb_info bcn_prb_info; 5631 /* beacon buffer length */ 5632 __le32 buf_len; 5633 /* Variable length data */ 5634 u8 data[1]; 5635 } __packed; 5636 5637 enum wmi_sta_ps_mode { 5638 /* enable power save for the given STA VDEV */ 5639 WMI_STA_PS_MODE_DISABLED = 0, 5640 /* disable power save for a given STA VDEV */ 5641 WMI_STA_PS_MODE_ENABLED = 1, 5642 }; 5643 5644 struct wmi_sta_powersave_mode_cmd { 5645 /* unique id identifying the VDEV, generated by the caller */ 5646 __le32 vdev_id; 5647 5648 /* 5649 * Power save mode 5650 * (see enum wmi_sta_ps_mode) 5651 */ 5652 __le32 sta_ps_mode; 5653 } __packed; 5654 5655 enum wmi_csa_offload_en { 5656 WMI_CSA_OFFLOAD_DISABLE = 0, 5657 WMI_CSA_OFFLOAD_ENABLE = 1, 5658 }; 5659 5660 struct wmi_csa_offload_enable_cmd { 5661 __le32 vdev_id; 5662 __le32 csa_offload_enable; 5663 } __packed; 5664 5665 struct wmi_csa_offload_chanswitch_cmd { 5666 __le32 vdev_id; 5667 struct wmi_channel chan; 5668 } __packed; 5669 5670 /* 5671 * This parameter controls the policy for retrieving frames from AP while the 5672 * STA is in sleep state. 5673 * 5674 * Only takes affect if the sta_ps_mode is enabled 5675 */ 5676 enum wmi_sta_ps_param_rx_wake_policy { 5677 /* 5678 * Wake up when ever there is an RX activity on the VDEV. In this mode 5679 * the Power save SM(state machine) will come out of sleep by either 5680 * sending null frame (or) a data frame (with PS==0) in response to TIM 5681 * bit set in the received beacon frame from AP. 5682 */ 5683 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5684 5685 /* 5686 * Here the power save state machine will not wakeup in response to TIM 5687 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5688 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5689 * access categories are delivery-enabled, the station will send a 5690 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5691 */ 5692 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5693 }; 5694 5695 /* 5696 * Number of tx frames/beacon that cause the power save SM to wake up. 5697 * 5698 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5699 * meaning, It will cause the SM to never wake up. This is useful if you want 5700 * to keep the system to sleep all the time for some kind of test mode . host 5701 * can change this parameter any time. It will affect at the next tx frame. 5702 */ 5703 enum wmi_sta_ps_param_tx_wake_threshold { 5704 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5705 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5706 5707 /* 5708 * Values greater than one indicate that many TX attempts per beacon 5709 * interval before the STA will wake up 5710 */ 5711 }; 5712 5713 /* 5714 * The maximum number of PS-Poll frames the FW will send in response to 5715 * traffic advertised in TIM before waking up (by sending a null frame with PS 5716 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5717 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5718 * parameter is used when the RX wake policy is 5719 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5720 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5721 */ 5722 enum wmi_sta_ps_param_pspoll_count { 5723 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5724 /* 5725 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5726 * FW will send before waking up. 5727 */ 5728 5729 /* When u-APSD is enabled the firmware will be very reluctant to exit 5730 * STA PS. This could result in very poor Rx performance with STA doing 5731 * PS-Poll for each and every buffered frame. This value is a bit 5732 * arbitrary. 5733 */ 5734 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5735 }; 5736 5737 /* 5738 * This will include the delivery and trigger enabled state for every AC. 5739 * This is the negotiated state with AP. The host MLME needs to set this based 5740 * on AP capability and the state Set in the association request by the 5741 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5742 */ 5743 #define WMI_UAPSD_AC_TYPE_DELI 0 5744 #define WMI_UAPSD_AC_TYPE_TRIG 1 5745 5746 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5747 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5748 5749 enum wmi_sta_ps_param_uapsd { 5750 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5751 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5752 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5753 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5754 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5755 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5756 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5757 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5758 }; 5759 5760 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5761 5762 struct wmi_sta_uapsd_auto_trig_param { 5763 __le32 wmm_ac; 5764 __le32 user_priority; 5765 __le32 service_interval; 5766 __le32 suspend_interval; 5767 __le32 delay_interval; 5768 }; 5769 5770 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5771 __le32 vdev_id; 5772 struct wmi_mac_addr peer_macaddr; 5773 __le32 num_ac; 5774 }; 5775 5776 struct wmi_sta_uapsd_auto_trig_arg { 5777 u32 wmm_ac; 5778 u32 user_priority; 5779 u32 service_interval; 5780 u32 suspend_interval; 5781 u32 delay_interval; 5782 }; 5783 5784 enum wmi_sta_powersave_param { 5785 /* 5786 * Controls how frames are retrievd from AP while STA is sleeping 5787 * 5788 * (see enum wmi_sta_ps_param_rx_wake_policy) 5789 */ 5790 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5791 5792 /* 5793 * The STA will go active after this many TX 5794 * 5795 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5796 */ 5797 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5798 5799 /* 5800 * Number of PS-Poll to send before STA wakes up 5801 * 5802 * (see enum wmi_sta_ps_param_pspoll_count) 5803 * 5804 */ 5805 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5806 5807 /* 5808 * TX/RX inactivity time in msec before going to sleep. 5809 * 5810 * The power save SM will monitor tx/rx activity on the VDEV, if no 5811 * activity for the specified msec of the parameter the Power save 5812 * SM will go to sleep. 5813 */ 5814 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5815 5816 /* 5817 * Set uapsd configuration. 5818 * 5819 * (see enum wmi_sta_ps_param_uapsd) 5820 */ 5821 WMI_STA_PS_PARAM_UAPSD = 4, 5822 }; 5823 5824 struct wmi_sta_powersave_param_cmd { 5825 __le32 vdev_id; 5826 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5827 __le32 param_value; 5828 } __packed; 5829 5830 /* No MIMO power save */ 5831 #define WMI_STA_MIMO_PS_MODE_DISABLE 5832 /* mimo powersave mode static*/ 5833 #define WMI_STA_MIMO_PS_MODE_STATIC 5834 /* mimo powersave mode dynamic */ 5835 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5836 5837 struct wmi_sta_mimo_ps_mode_cmd { 5838 /* unique id identifying the VDEV, generated by the caller */ 5839 __le32 vdev_id; 5840 /* mimo powersave mode as defined above */ 5841 __le32 mimo_pwrsave_mode; 5842 } __packed; 5843 5844 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5845 enum wmi_ap_ps_param_uapsd { 5846 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5847 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5848 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5849 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5850 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5851 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5852 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5853 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5854 }; 5855 5856 /* U-APSD maximum service period of peer station */ 5857 enum wmi_ap_ps_peer_param_max_sp { 5858 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5859 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5860 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5861 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5862 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5863 }; 5864 5865 /* 5866 * AP power save parameter 5867 * Set a power save specific parameter for a peer station 5868 */ 5869 enum wmi_ap_ps_peer_param { 5870 /* Set uapsd configuration for a given peer. 5871 * 5872 * Include the delivery and trigger enabled state for every AC. 5873 * The host MLME needs to set this based on AP capability and stations 5874 * request Set in the association request received from the station. 5875 * 5876 * Lower 8 bits of the value specify the UAPSD configuration. 5877 * 5878 * (see enum wmi_ap_ps_param_uapsd) 5879 * The default value is 0. 5880 */ 5881 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5882 5883 /* 5884 * Set the service period for a UAPSD capable station 5885 * 5886 * The service period from wme ie in the (re)assoc request frame. 5887 * 5888 * (see enum wmi_ap_ps_peer_param_max_sp) 5889 */ 5890 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 5891 5892 /* Time in seconds for aging out buffered frames for STA in PS */ 5893 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 5894 }; 5895 5896 struct wmi_ap_ps_peer_cmd { 5897 /* unique id identifying the VDEV, generated by the caller */ 5898 __le32 vdev_id; 5899 5900 /* peer MAC address */ 5901 struct wmi_mac_addr peer_macaddr; 5902 5903 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 5904 __le32 param_id; 5905 5906 /* AP powersave param value */ 5907 __le32 param_value; 5908 } __packed; 5909 5910 /* 128 clients = 4 words */ 5911 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 5912 5913 struct wmi_tim_info { 5914 __le32 tim_len; 5915 __le32 tim_mcast; 5916 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 5917 __le32 tim_changed; 5918 __le32 tim_num_ps_pending; 5919 } __packed; 5920 5921 struct wmi_tim_info_arg { 5922 __le32 tim_len; 5923 __le32 tim_mcast; 5924 const __le32 *tim_bitmap; 5925 __le32 tim_changed; 5926 __le32 tim_num_ps_pending; 5927 } __packed; 5928 5929 /* Maximum number of NOA Descriptors supported */ 5930 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 5931 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 5932 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 5933 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 5934 5935 struct wmi_p2p_noa_info { 5936 /* Bit 0 - Flag to indicate an update in NOA schedule 5937 * Bits 7-1 - Reserved 5938 */ 5939 u8 changed; 5940 /* NOA index */ 5941 u8 index; 5942 /* Bit 0 - Opp PS state of the AP 5943 * Bits 1-7 - Ctwindow in TUs 5944 */ 5945 u8 ctwindow_oppps; 5946 /* Number of NOA descriptors */ 5947 u8 num_descriptors; 5948 5949 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 5950 } __packed; 5951 5952 struct wmi_bcn_info { 5953 struct wmi_tim_info tim_info; 5954 struct wmi_p2p_noa_info p2p_noa_info; 5955 } __packed; 5956 5957 struct wmi_host_swba_event { 5958 __le32 vdev_map; 5959 struct wmi_bcn_info bcn_info[0]; 5960 } __packed; 5961 5962 struct wmi_10_2_4_bcn_info { 5963 struct wmi_tim_info tim_info; 5964 /* The 10.2.4 FW doesn't have p2p NOA info */ 5965 } __packed; 5966 5967 struct wmi_10_2_4_host_swba_event { 5968 __le32 vdev_map; 5969 struct wmi_10_2_4_bcn_info bcn_info[0]; 5970 } __packed; 5971 5972 /* 16 words = 512 client + 1 word = for guard */ 5973 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 5974 5975 struct wmi_10_4_tim_info { 5976 __le32 tim_len; 5977 __le32 tim_mcast; 5978 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 5979 __le32 tim_changed; 5980 __le32 tim_num_ps_pending; 5981 } __packed; 5982 5983 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 5984 5985 struct wmi_10_4_p2p_noa_info { 5986 /* Bit 0 - Flag to indicate an update in NOA schedule 5987 * Bits 7-1 - Reserved 5988 */ 5989 u8 changed; 5990 /* NOA index */ 5991 u8 index; 5992 /* Bit 0 - Opp PS state of the AP 5993 * Bits 1-7 - Ctwindow in TUs 5994 */ 5995 u8 ctwindow_oppps; 5996 /* Number of NOA descriptors */ 5997 u8 num_descriptors; 5998 5999 struct wmi_p2p_noa_descriptor 6000 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 6001 } __packed; 6002 6003 struct wmi_10_4_bcn_info { 6004 struct wmi_10_4_tim_info tim_info; 6005 struct wmi_10_4_p2p_noa_info p2p_noa_info; 6006 } __packed; 6007 6008 struct wmi_10_4_host_swba_event { 6009 __le32 vdev_map; 6010 struct wmi_10_4_bcn_info bcn_info[0]; 6011 } __packed; 6012 6013 #define WMI_MAX_AP_VDEV 16 6014 6015 struct wmi_tbtt_offset_event { 6016 __le32 vdev_map; 6017 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 6018 } __packed; 6019 6020 struct wmi_peer_create_cmd { 6021 __le32 vdev_id; 6022 struct wmi_mac_addr peer_macaddr; 6023 __le32 peer_type; 6024 } __packed; 6025 6026 enum wmi_peer_type { 6027 WMI_PEER_TYPE_DEFAULT = 0, 6028 WMI_PEER_TYPE_BSS = 1, 6029 WMI_PEER_TYPE_TDLS = 2, 6030 }; 6031 6032 struct wmi_peer_delete_cmd { 6033 __le32 vdev_id; 6034 struct wmi_mac_addr peer_macaddr; 6035 } __packed; 6036 6037 struct wmi_peer_flush_tids_cmd { 6038 __le32 vdev_id; 6039 struct wmi_mac_addr peer_macaddr; 6040 __le32 peer_tid_bitmap; 6041 } __packed; 6042 6043 struct wmi_fixed_rate { 6044 /* 6045 * rate mode . 0: disable fixed rate (auto rate) 6046 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 6047 * 2: ht20 11n rate specified as mcs index 6048 * 3: ht40 11n rate specified as mcs index 6049 */ 6050 __le32 rate_mode; 6051 /* 6052 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 6053 * and series 3 is stored at byte 3 (MSB) 6054 */ 6055 __le32 rate_series; 6056 /* 6057 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 6058 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 6059 * (MSB) 6060 */ 6061 __le32 rate_retries; 6062 } __packed; 6063 6064 struct wmi_peer_fixed_rate_cmd { 6065 /* unique id identifying the VDEV, generated by the caller */ 6066 __le32 vdev_id; 6067 /* peer MAC address */ 6068 struct wmi_mac_addr peer_macaddr; 6069 /* fixed rate */ 6070 struct wmi_fixed_rate peer_fixed_rate; 6071 } __packed; 6072 6073 #define WMI_MGMT_TID 17 6074 6075 struct wmi_addba_clear_resp_cmd { 6076 /* unique id identifying the VDEV, generated by the caller */ 6077 __le32 vdev_id; 6078 /* peer MAC address */ 6079 struct wmi_mac_addr peer_macaddr; 6080 } __packed; 6081 6082 struct wmi_addba_send_cmd { 6083 /* unique id identifying the VDEV, generated by the caller */ 6084 __le32 vdev_id; 6085 /* peer MAC address */ 6086 struct wmi_mac_addr peer_macaddr; 6087 /* Tid number */ 6088 __le32 tid; 6089 /* Buffer/Window size*/ 6090 __le32 buffersize; 6091 } __packed; 6092 6093 struct wmi_delba_send_cmd { 6094 /* unique id identifying the VDEV, generated by the caller */ 6095 __le32 vdev_id; 6096 /* peer MAC address */ 6097 struct wmi_mac_addr peer_macaddr; 6098 /* Tid number */ 6099 __le32 tid; 6100 /* Is Initiator */ 6101 __le32 initiator; 6102 /* Reason code */ 6103 __le32 reasoncode; 6104 } __packed; 6105 6106 struct wmi_addba_setresponse_cmd { 6107 /* unique id identifying the vdev, generated by the caller */ 6108 __le32 vdev_id; 6109 /* peer mac address */ 6110 struct wmi_mac_addr peer_macaddr; 6111 /* Tid number */ 6112 __le32 tid; 6113 /* status code */ 6114 __le32 statuscode; 6115 } __packed; 6116 6117 struct wmi_send_singleamsdu_cmd { 6118 /* unique id identifying the vdev, generated by the caller */ 6119 __le32 vdev_id; 6120 /* peer mac address */ 6121 struct wmi_mac_addr peer_macaddr; 6122 /* Tid number */ 6123 __le32 tid; 6124 } __packed; 6125 6126 enum wmi_peer_smps_state { 6127 WMI_PEER_SMPS_PS_NONE = 0x0, 6128 WMI_PEER_SMPS_STATIC = 0x1, 6129 WMI_PEER_SMPS_DYNAMIC = 0x2 6130 }; 6131 6132 enum wmi_peer_chwidth { 6133 WMI_PEER_CHWIDTH_20MHZ = 0, 6134 WMI_PEER_CHWIDTH_40MHZ = 1, 6135 WMI_PEER_CHWIDTH_80MHZ = 2, 6136 WMI_PEER_CHWIDTH_160MHZ = 3, 6137 }; 6138 6139 enum wmi_peer_param { 6140 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6141 WMI_PEER_AMPDU = 0x2, 6142 WMI_PEER_AUTHORIZE = 0x3, 6143 WMI_PEER_CHAN_WIDTH = 0x4, 6144 WMI_PEER_NSS = 0x5, 6145 WMI_PEER_USE_4ADDR = 0x6, 6146 WMI_PEER_DEBUG = 0xa, 6147 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6148 }; 6149 6150 struct wmi_peer_set_param_cmd { 6151 __le32 vdev_id; 6152 struct wmi_mac_addr peer_macaddr; 6153 __le32 param_id; 6154 __le32 param_value; 6155 } __packed; 6156 6157 #define MAX_SUPPORTED_RATES 128 6158 6159 struct wmi_rate_set { 6160 /* total number of rates */ 6161 __le32 num_rates; 6162 /* 6163 * rates (each 8bit value) packed into a 32 bit word. 6164 * the rates are filled from least significant byte to most 6165 * significant byte. 6166 */ 6167 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6168 } __packed; 6169 6170 struct wmi_rate_set_arg { 6171 unsigned int num_rates; 6172 u8 rates[MAX_SUPPORTED_RATES]; 6173 }; 6174 6175 /* 6176 * NOTE: It would bea good idea to represent the Tx MCS 6177 * info in one word and Rx in another word. This is split 6178 * into multiple words for convenience 6179 */ 6180 struct wmi_vht_rate_set { 6181 __le32 rx_max_rate; /* Max Rx data rate */ 6182 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6183 __le32 tx_max_rate; /* Max Tx data rate */ 6184 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6185 } __packed; 6186 6187 struct wmi_vht_rate_set_arg { 6188 u32 rx_max_rate; 6189 u32 rx_mcs_set; 6190 u32 tx_max_rate; 6191 u32 tx_mcs_set; 6192 }; 6193 6194 struct wmi_peer_set_rates_cmd { 6195 /* peer MAC address */ 6196 struct wmi_mac_addr peer_macaddr; 6197 /* legacy rate set */ 6198 struct wmi_rate_set peer_legacy_rates; 6199 /* ht rate set */ 6200 struct wmi_rate_set peer_ht_rates; 6201 } __packed; 6202 6203 struct wmi_peer_set_q_empty_callback_cmd { 6204 /* unique id identifying the VDEV, generated by the caller */ 6205 __le32 vdev_id; 6206 /* peer MAC address */ 6207 struct wmi_mac_addr peer_macaddr; 6208 __le32 callback_enable; 6209 } __packed; 6210 6211 struct wmi_peer_flags_map { 6212 u32 auth; 6213 u32 qos; 6214 u32 need_ptk_4_way; 6215 u32 need_gtk_2_way; 6216 u32 apsd; 6217 u32 ht; 6218 u32 bw40; 6219 u32 stbc; 6220 u32 ldbc; 6221 u32 dyn_mimops; 6222 u32 static_mimops; 6223 u32 spatial_mux; 6224 u32 vht; 6225 u32 bw80; 6226 u32 vht_2g; 6227 u32 pmf; 6228 u32 bw160; 6229 }; 6230 6231 enum wmi_peer_flags { 6232 WMI_PEER_AUTH = 0x00000001, 6233 WMI_PEER_QOS = 0x00000002, 6234 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6235 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6236 WMI_PEER_APSD = 0x00000800, 6237 WMI_PEER_HT = 0x00001000, 6238 WMI_PEER_40MHZ = 0x00002000, 6239 WMI_PEER_STBC = 0x00008000, 6240 WMI_PEER_LDPC = 0x00010000, 6241 WMI_PEER_DYN_MIMOPS = 0x00020000, 6242 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6243 WMI_PEER_SPATIAL_MUX = 0x00200000, 6244 WMI_PEER_VHT = 0x02000000, 6245 WMI_PEER_80MHZ = 0x04000000, 6246 WMI_PEER_VHT_2G = 0x08000000, 6247 WMI_PEER_PMF = 0x10000000, 6248 WMI_PEER_160MHZ = 0x20000000 6249 }; 6250 6251 enum wmi_10x_peer_flags { 6252 WMI_10X_PEER_AUTH = 0x00000001, 6253 WMI_10X_PEER_QOS = 0x00000002, 6254 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6255 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6256 WMI_10X_PEER_APSD = 0x00000800, 6257 WMI_10X_PEER_HT = 0x00001000, 6258 WMI_10X_PEER_40MHZ = 0x00002000, 6259 WMI_10X_PEER_STBC = 0x00008000, 6260 WMI_10X_PEER_LDPC = 0x00010000, 6261 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6262 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6263 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6264 WMI_10X_PEER_VHT = 0x02000000, 6265 WMI_10X_PEER_80MHZ = 0x04000000, 6266 WMI_10X_PEER_160MHZ = 0x20000000 6267 }; 6268 6269 enum wmi_10_2_peer_flags { 6270 WMI_10_2_PEER_AUTH = 0x00000001, 6271 WMI_10_2_PEER_QOS = 0x00000002, 6272 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6273 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6274 WMI_10_2_PEER_APSD = 0x00000800, 6275 WMI_10_2_PEER_HT = 0x00001000, 6276 WMI_10_2_PEER_40MHZ = 0x00002000, 6277 WMI_10_2_PEER_STBC = 0x00008000, 6278 WMI_10_2_PEER_LDPC = 0x00010000, 6279 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6280 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6281 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6282 WMI_10_2_PEER_VHT = 0x02000000, 6283 WMI_10_2_PEER_80MHZ = 0x04000000, 6284 WMI_10_2_PEER_VHT_2G = 0x08000000, 6285 WMI_10_2_PEER_PMF = 0x10000000, 6286 WMI_10_2_PEER_160MHZ = 0x20000000 6287 }; 6288 6289 /* 6290 * Peer rate capabilities. 6291 * 6292 * This is of interest to the ratecontrol 6293 * module which resides in the firmware. The bit definitions are 6294 * consistent with that defined in if_athrate.c. 6295 */ 6296 #define WMI_RC_DS_FLAG 0x01 6297 #define WMI_RC_CW40_FLAG 0x02 6298 #define WMI_RC_SGI_FLAG 0x04 6299 #define WMI_RC_HT_FLAG 0x08 6300 #define WMI_RC_RTSCTS_FLAG 0x10 6301 #define WMI_RC_TX_STBC_FLAG 0x20 6302 #define WMI_RC_RX_STBC_FLAG 0xC0 6303 #define WMI_RC_RX_STBC_FLAG_S 6 6304 #define WMI_RC_WEP_TKIP_FLAG 0x100 6305 #define WMI_RC_TS_FLAG 0x200 6306 #define WMI_RC_UAPSD_FLAG 0x400 6307 6308 /* Maximum listen interval supported by hw in units of beacon interval */ 6309 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6310 6311 struct wmi_common_peer_assoc_complete_cmd { 6312 struct wmi_mac_addr peer_macaddr; 6313 __le32 vdev_id; 6314 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6315 __le32 peer_associd; /* 16 LSBs */ 6316 __le32 peer_flags; 6317 __le32 peer_caps; /* 16 LSBs */ 6318 __le32 peer_listen_intval; 6319 __le32 peer_ht_caps; 6320 __le32 peer_max_mpdu; 6321 __le32 peer_mpdu_density; /* 0..16 */ 6322 __le32 peer_rate_caps; 6323 struct wmi_rate_set peer_legacy_rates; 6324 struct wmi_rate_set peer_ht_rates; 6325 __le32 peer_nss; /* num of spatial streams */ 6326 __le32 peer_vht_caps; 6327 __le32 peer_phymode; 6328 struct wmi_vht_rate_set peer_vht_rates; 6329 }; 6330 6331 struct wmi_main_peer_assoc_complete_cmd { 6332 struct wmi_common_peer_assoc_complete_cmd cmd; 6333 6334 /* HT Operation Element of the peer. Five bytes packed in 2 6335 * INT32 array and filled from lsb to msb. 6336 */ 6337 __le32 peer_ht_info[2]; 6338 } __packed; 6339 6340 struct wmi_10_1_peer_assoc_complete_cmd { 6341 struct wmi_common_peer_assoc_complete_cmd cmd; 6342 } __packed; 6343 6344 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6345 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6346 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6347 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6348 6349 struct wmi_10_2_peer_assoc_complete_cmd { 6350 struct wmi_common_peer_assoc_complete_cmd cmd; 6351 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6352 } __packed; 6353 6354 #define PEER_BW_RXNSS_OVERRIDE_OFFSET 31 6355 6356 struct wmi_10_4_peer_assoc_complete_cmd { 6357 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6358 __le32 peer_bw_rxnss_override; 6359 } __packed; 6360 6361 struct wmi_peer_assoc_complete_arg { 6362 u8 addr[ETH_ALEN]; 6363 u32 vdev_id; 6364 bool peer_reassoc; 6365 u16 peer_aid; 6366 u32 peer_flags; /* see %WMI_PEER_ */ 6367 u16 peer_caps; 6368 u32 peer_listen_intval; 6369 u32 peer_ht_caps; 6370 u32 peer_max_mpdu; 6371 u32 peer_mpdu_density; /* 0..16 */ 6372 u32 peer_rate_caps; /* see %WMI_RC_ */ 6373 struct wmi_rate_set_arg peer_legacy_rates; 6374 struct wmi_rate_set_arg peer_ht_rates; 6375 u32 peer_num_spatial_streams; 6376 u32 peer_vht_caps; 6377 enum wmi_phy_mode peer_phymode; 6378 struct wmi_vht_rate_set_arg peer_vht_rates; 6379 u32 peer_bw_rxnss_override; 6380 }; 6381 6382 struct wmi_peer_add_wds_entry_cmd { 6383 /* peer MAC address */ 6384 struct wmi_mac_addr peer_macaddr; 6385 /* wds MAC addr */ 6386 struct wmi_mac_addr wds_macaddr; 6387 } __packed; 6388 6389 struct wmi_peer_remove_wds_entry_cmd { 6390 /* wds MAC addr */ 6391 struct wmi_mac_addr wds_macaddr; 6392 } __packed; 6393 6394 struct wmi_peer_q_empty_callback_event { 6395 /* peer MAC address */ 6396 struct wmi_mac_addr peer_macaddr; 6397 } __packed; 6398 6399 /* 6400 * Channel info WMI event 6401 */ 6402 struct wmi_chan_info_event { 6403 __le32 err_code; 6404 __le32 freq; 6405 __le32 cmd_flags; 6406 __le32 noise_floor; 6407 __le32 rx_clear_count; 6408 __le32 cycle_count; 6409 } __packed; 6410 6411 struct wmi_10_4_chan_info_event { 6412 __le32 err_code; 6413 __le32 freq; 6414 __le32 cmd_flags; 6415 __le32 noise_floor; 6416 __le32 rx_clear_count; 6417 __le32 cycle_count; 6418 __le32 chan_tx_pwr_range; 6419 __le32 chan_tx_pwr_tp; 6420 __le32 rx_frame_count; 6421 } __packed; 6422 6423 struct wmi_peer_sta_kickout_event { 6424 struct wmi_mac_addr peer_macaddr; 6425 } __packed; 6426 6427 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6428 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6429 6430 /* Beacon filter wmi command info */ 6431 #define BCN_FLT_MAX_SUPPORTED_IES 256 6432 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6433 6434 struct bss_bcn_stats { 6435 __le32 vdev_id; 6436 __le32 bss_bcnsdropped; 6437 __le32 bss_bcnsdelivered; 6438 } __packed; 6439 6440 struct bcn_filter_stats { 6441 __le32 bcns_dropped; 6442 __le32 bcns_delivered; 6443 __le32 activefilters; 6444 struct bss_bcn_stats bss_stats; 6445 } __packed; 6446 6447 struct wmi_add_bcn_filter_cmd { 6448 u32 vdev_id; 6449 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6450 } __packed; 6451 6452 enum wmi_sta_keepalive_method { 6453 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6454 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6455 }; 6456 6457 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6458 6459 /* Firmware crashes if keepalive interval exceeds this limit */ 6460 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6461 6462 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6463 struct wmi_sta_keepalive_arp_resp { 6464 __be32 src_ip4_addr; 6465 __be32 dest_ip4_addr; 6466 struct wmi_mac_addr dest_mac_addr; 6467 } __packed; 6468 6469 struct wmi_sta_keepalive_cmd { 6470 __le32 vdev_id; 6471 __le32 enabled; 6472 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6473 __le32 interval; /* in seconds */ 6474 struct wmi_sta_keepalive_arp_resp arp_resp; 6475 } __packed; 6476 6477 struct wmi_sta_keepalive_arg { 6478 u32 vdev_id; 6479 u32 enabled; 6480 u32 method; 6481 u32 interval; 6482 __be32 src_ip4_addr; 6483 __be32 dest_ip4_addr; 6484 const u8 dest_mac_addr[ETH_ALEN]; 6485 }; 6486 6487 enum wmi_force_fw_hang_type { 6488 WMI_FORCE_FW_HANG_ASSERT = 1, 6489 WMI_FORCE_FW_HANG_NO_DETECT, 6490 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6491 WMI_FORCE_FW_HANG_EMPTY_POINT, 6492 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6493 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6494 }; 6495 6496 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6497 6498 struct wmi_force_fw_hang_cmd { 6499 __le32 type; 6500 __le32 delay_ms; 6501 } __packed; 6502 6503 enum ath10k_dbglog_level { 6504 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6505 ATH10K_DBGLOG_LEVEL_INFO = 1, 6506 ATH10K_DBGLOG_LEVEL_WARN = 2, 6507 ATH10K_DBGLOG_LEVEL_ERR = 3, 6508 }; 6509 6510 /* VAP ids to enable dbglog */ 6511 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6512 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6513 6514 /* to enable dbglog in the firmware */ 6515 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6516 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6517 6518 /* timestamp resolution */ 6519 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6520 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6521 6522 /* number of queued messages before sending them to the host */ 6523 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6524 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6525 6526 /* 6527 * Log levels to enable. This defines the minimum level to enable, this is 6528 * not a bitmask. See enum ath10k_dbglog_level for the values. 6529 */ 6530 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6531 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6532 6533 /* 6534 * Note: this is a cleaned up version of a struct firmware uses. For 6535 * example, config_valid was hidden inside an array. 6536 */ 6537 struct wmi_dbglog_cfg_cmd { 6538 /* bitmask to hold mod id config*/ 6539 __le32 module_enable; 6540 6541 /* see ATH10K_DBGLOG_CFG_ */ 6542 __le32 config_enable; 6543 6544 /* mask of module id bits to be changed */ 6545 __le32 module_valid; 6546 6547 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6548 __le32 config_valid; 6549 } __packed; 6550 6551 struct wmi_10_4_dbglog_cfg_cmd { 6552 /* bitmask to hold mod id config*/ 6553 __le64 module_enable; 6554 6555 /* see ATH10K_DBGLOG_CFG_ */ 6556 __le32 config_enable; 6557 6558 /* mask of module id bits to be changed */ 6559 __le64 module_valid; 6560 6561 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6562 __le32 config_valid; 6563 } __packed; 6564 6565 enum wmi_roam_reason { 6566 WMI_ROAM_REASON_BETTER_AP = 1, 6567 WMI_ROAM_REASON_BEACON_MISS = 2, 6568 WMI_ROAM_REASON_LOW_RSSI = 3, 6569 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6570 WMI_ROAM_REASON_HO_FAILED = 5, 6571 6572 /* keep last */ 6573 WMI_ROAM_REASON_MAX, 6574 }; 6575 6576 struct wmi_roam_ev { 6577 __le32 vdev_id; 6578 __le32 reason; 6579 } __packed; 6580 6581 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6582 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6583 6584 #define WMI_MAX_EVENT 0x1000 6585 /* Maximum number of pending TXed WMI packets */ 6586 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6587 6588 /* By default disable power save for IBSS */ 6589 #define ATH10K_DEFAULT_ATIM 0 6590 6591 #define WMI_MAX_MEM_REQS 16 6592 6593 struct wmi_scan_ev_arg { 6594 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6595 __le32 reason; /* %WMI_SCAN_REASON_ */ 6596 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6597 __le32 scan_req_id; 6598 __le32 scan_id; 6599 __le32 vdev_id; 6600 }; 6601 6602 struct wmi_mgmt_rx_ev_arg { 6603 __le32 channel; 6604 __le32 snr; 6605 __le32 rate; 6606 __le32 phy_mode; 6607 __le32 buf_len; 6608 __le32 status; /* %WMI_RX_STATUS_ */ 6609 struct wmi_mgmt_rx_ext_info ext_info; 6610 }; 6611 6612 struct wmi_ch_info_ev_arg { 6613 __le32 err_code; 6614 __le32 freq; 6615 __le32 cmd_flags; 6616 __le32 noise_floor; 6617 __le32 rx_clear_count; 6618 __le32 cycle_count; 6619 __le32 chan_tx_pwr_range; 6620 __le32 chan_tx_pwr_tp; 6621 __le32 rx_frame_count; 6622 }; 6623 6624 struct wmi_vdev_start_ev_arg { 6625 __le32 vdev_id; 6626 __le32 req_id; 6627 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6628 __le32 status; 6629 }; 6630 6631 struct wmi_peer_kick_ev_arg { 6632 const u8 *mac_addr; 6633 }; 6634 6635 struct wmi_swba_ev_arg { 6636 __le32 vdev_map; 6637 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6638 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6639 }; 6640 6641 struct wmi_phyerr_ev_arg { 6642 u32 tsf_timestamp; 6643 u16 freq1; 6644 u16 freq2; 6645 u8 rssi_combined; 6646 u8 chan_width_mhz; 6647 u8 phy_err_code; 6648 u16 nf_chains[4]; 6649 u32 buf_len; 6650 const u8 *buf; 6651 u8 hdr_len; 6652 }; 6653 6654 struct wmi_phyerr_hdr_arg { 6655 u32 num_phyerrs; 6656 u32 tsf_l32; 6657 u32 tsf_u32; 6658 u32 buf_len; 6659 const void *phyerrs; 6660 }; 6661 6662 struct wmi_dfs_status_ev_arg { 6663 u32 status; 6664 }; 6665 6666 struct wmi_svc_rdy_ev_arg { 6667 __le32 min_tx_power; 6668 __le32 max_tx_power; 6669 __le32 ht_cap; 6670 __le32 vht_cap; 6671 __le32 sw_ver0; 6672 __le32 sw_ver1; 6673 __le32 fw_build; 6674 __le32 phy_capab; 6675 __le32 num_rf_chains; 6676 __le32 eeprom_rd; 6677 __le32 num_mem_reqs; 6678 __le32 low_5ghz_chan; 6679 __le32 high_5ghz_chan; 6680 const __le32 *service_map; 6681 size_t service_map_len; 6682 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6683 }; 6684 6685 struct wmi_svc_avail_ev_arg { 6686 __le32 service_map_ext_len; 6687 const __le32 *service_map_ext; 6688 }; 6689 6690 struct wmi_rdy_ev_arg { 6691 __le32 sw_version; 6692 __le32 abi_version; 6693 __le32 status; 6694 const u8 *mac_addr; 6695 }; 6696 6697 struct wmi_roam_ev_arg { 6698 __le32 vdev_id; 6699 __le32 reason; 6700 __le32 rssi; 6701 }; 6702 6703 struct wmi_echo_ev_arg { 6704 __le32 value; 6705 }; 6706 6707 struct wmi_pdev_temperature_event { 6708 /* temperature value in Celcius degree */ 6709 __le32 temperature; 6710 } __packed; 6711 6712 struct wmi_pdev_bss_chan_info_event { 6713 __le32 freq; 6714 __le32 noise_floor; 6715 __le64 cycle_busy; 6716 __le64 cycle_total; 6717 __le64 cycle_tx; 6718 __le64 cycle_rx; 6719 __le64 cycle_rx_bss; 6720 __le32 reserved; 6721 } __packed; 6722 6723 /* WOW structures */ 6724 enum wmi_wow_wakeup_event { 6725 WOW_BMISS_EVENT = 0, 6726 WOW_BETTER_AP_EVENT, 6727 WOW_DEAUTH_RECVD_EVENT, 6728 WOW_MAGIC_PKT_RECVD_EVENT, 6729 WOW_GTK_ERR_EVENT, 6730 WOW_FOURWAY_HSHAKE_EVENT, 6731 WOW_EAPOL_RECVD_EVENT, 6732 WOW_NLO_DETECTED_EVENT, 6733 WOW_DISASSOC_RECVD_EVENT, 6734 WOW_PATTERN_MATCH_EVENT, 6735 WOW_CSA_IE_EVENT, 6736 WOW_PROBE_REQ_WPS_IE_EVENT, 6737 WOW_AUTH_REQ_EVENT, 6738 WOW_ASSOC_REQ_EVENT, 6739 WOW_HTT_EVENT, 6740 WOW_RA_MATCH_EVENT, 6741 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6742 WOW_IOAC_MAGIC_EVENT, 6743 WOW_IOAC_SHORT_EVENT, 6744 WOW_IOAC_EXTEND_EVENT, 6745 WOW_IOAC_TIMER_EVENT, 6746 WOW_DFS_PHYERR_RADAR_EVENT, 6747 WOW_BEACON_EVENT, 6748 WOW_CLIENT_KICKOUT_EVENT, 6749 WOW_EVENT_MAX, 6750 }; 6751 6752 #define C2S(x) case x: return #x 6753 6754 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6755 { 6756 switch (ev) { 6757 C2S(WOW_BMISS_EVENT); 6758 C2S(WOW_BETTER_AP_EVENT); 6759 C2S(WOW_DEAUTH_RECVD_EVENT); 6760 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6761 C2S(WOW_GTK_ERR_EVENT); 6762 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6763 C2S(WOW_EAPOL_RECVD_EVENT); 6764 C2S(WOW_NLO_DETECTED_EVENT); 6765 C2S(WOW_DISASSOC_RECVD_EVENT); 6766 C2S(WOW_PATTERN_MATCH_EVENT); 6767 C2S(WOW_CSA_IE_EVENT); 6768 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6769 C2S(WOW_AUTH_REQ_EVENT); 6770 C2S(WOW_ASSOC_REQ_EVENT); 6771 C2S(WOW_HTT_EVENT); 6772 C2S(WOW_RA_MATCH_EVENT); 6773 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6774 C2S(WOW_IOAC_MAGIC_EVENT); 6775 C2S(WOW_IOAC_SHORT_EVENT); 6776 C2S(WOW_IOAC_EXTEND_EVENT); 6777 C2S(WOW_IOAC_TIMER_EVENT); 6778 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6779 C2S(WOW_BEACON_EVENT); 6780 C2S(WOW_CLIENT_KICKOUT_EVENT); 6781 C2S(WOW_EVENT_MAX); 6782 default: 6783 return NULL; 6784 } 6785 } 6786 6787 enum wmi_wow_wake_reason { 6788 WOW_REASON_UNSPECIFIED = -1, 6789 WOW_REASON_NLOD = 0, 6790 WOW_REASON_AP_ASSOC_LOST, 6791 WOW_REASON_LOW_RSSI, 6792 WOW_REASON_DEAUTH_RECVD, 6793 WOW_REASON_DISASSOC_RECVD, 6794 WOW_REASON_GTK_HS_ERR, 6795 WOW_REASON_EAP_REQ, 6796 WOW_REASON_FOURWAY_HS_RECV, 6797 WOW_REASON_TIMER_INTR_RECV, 6798 WOW_REASON_PATTERN_MATCH_FOUND, 6799 WOW_REASON_RECV_MAGIC_PATTERN, 6800 WOW_REASON_P2P_DISC, 6801 WOW_REASON_WLAN_HB, 6802 WOW_REASON_CSA_EVENT, 6803 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6804 WOW_REASON_AUTH_REQ_RECV, 6805 WOW_REASON_ASSOC_REQ_RECV, 6806 WOW_REASON_HTT_EVENT, 6807 WOW_REASON_RA_MATCH, 6808 WOW_REASON_HOST_AUTO_SHUTDOWN, 6809 WOW_REASON_IOAC_MAGIC_EVENT, 6810 WOW_REASON_IOAC_SHORT_EVENT, 6811 WOW_REASON_IOAC_EXTEND_EVENT, 6812 WOW_REASON_IOAC_TIMER_EVENT, 6813 WOW_REASON_ROAM_HO, 6814 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6815 WOW_REASON_BEACON_RECV, 6816 WOW_REASON_CLIENT_KICKOUT_EVENT, 6817 WOW_REASON_DEBUG_TEST = 0xFF, 6818 }; 6819 6820 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6821 { 6822 switch (reason) { 6823 C2S(WOW_REASON_UNSPECIFIED); 6824 C2S(WOW_REASON_NLOD); 6825 C2S(WOW_REASON_AP_ASSOC_LOST); 6826 C2S(WOW_REASON_LOW_RSSI); 6827 C2S(WOW_REASON_DEAUTH_RECVD); 6828 C2S(WOW_REASON_DISASSOC_RECVD); 6829 C2S(WOW_REASON_GTK_HS_ERR); 6830 C2S(WOW_REASON_EAP_REQ); 6831 C2S(WOW_REASON_FOURWAY_HS_RECV); 6832 C2S(WOW_REASON_TIMER_INTR_RECV); 6833 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 6834 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 6835 C2S(WOW_REASON_P2P_DISC); 6836 C2S(WOW_REASON_WLAN_HB); 6837 C2S(WOW_REASON_CSA_EVENT); 6838 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 6839 C2S(WOW_REASON_AUTH_REQ_RECV); 6840 C2S(WOW_REASON_ASSOC_REQ_RECV); 6841 C2S(WOW_REASON_HTT_EVENT); 6842 C2S(WOW_REASON_RA_MATCH); 6843 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 6844 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 6845 C2S(WOW_REASON_IOAC_SHORT_EVENT); 6846 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 6847 C2S(WOW_REASON_IOAC_TIMER_EVENT); 6848 C2S(WOW_REASON_ROAM_HO); 6849 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 6850 C2S(WOW_REASON_BEACON_RECV); 6851 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 6852 C2S(WOW_REASON_DEBUG_TEST); 6853 default: 6854 return NULL; 6855 } 6856 } 6857 6858 #undef C2S 6859 6860 struct wmi_wow_ev_arg { 6861 u32 vdev_id; 6862 u32 flag; 6863 enum wmi_wow_wake_reason wake_reason; 6864 u32 data_len; 6865 }; 6866 6867 #define WOW_MIN_PATTERN_SIZE 1 6868 #define WOW_MAX_PATTERN_SIZE 148 6869 #define WOW_MAX_PKT_OFFSET 128 6870 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ 6871 sizeof(struct rfc1042_hdr)) 6872 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ 6873 offsetof(struct ieee80211_hdr_3addr, addr1)) 6874 6875 enum wmi_tdls_state { 6876 WMI_TDLS_DISABLE, 6877 WMI_TDLS_ENABLE_PASSIVE, 6878 WMI_TDLS_ENABLE_ACTIVE, 6879 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, 6880 }; 6881 6882 enum wmi_tdls_peer_state { 6883 WMI_TDLS_PEER_STATE_PEERING, 6884 WMI_TDLS_PEER_STATE_CONNECTED, 6885 WMI_TDLS_PEER_STATE_TEARDOWN, 6886 }; 6887 6888 struct wmi_tdls_peer_update_cmd_arg { 6889 u32 vdev_id; 6890 enum wmi_tdls_peer_state peer_state; 6891 u8 addr[ETH_ALEN]; 6892 }; 6893 6894 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 6895 6896 #define WMI_TDLS_PEER_SP_MASK 0x60 6897 #define WMI_TDLS_PEER_SP_LSB 5 6898 6899 enum wmi_tdls_options { 6900 WMI_TDLS_OFFCHAN_EN = BIT(0), 6901 WMI_TDLS_BUFFER_STA_EN = BIT(1), 6902 WMI_TDLS_SLEEP_STA_EN = BIT(2), 6903 }; 6904 6905 enum { 6906 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 6907 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 6908 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 6909 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 6910 }; 6911 6912 struct wmi_tdls_peer_capab_arg { 6913 u8 peer_uapsd_queues; 6914 u8 peer_max_sp; 6915 u32 buff_sta_support; 6916 u32 off_chan_support; 6917 u32 peer_curr_operclass; 6918 u32 self_curr_operclass; 6919 u32 peer_chan_len; 6920 u32 peer_operclass_len; 6921 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6922 u32 is_peer_responder; 6923 u32 pref_offchan_num; 6924 u32 pref_offchan_bw; 6925 }; 6926 6927 struct wmi_10_4_tdls_set_state_cmd { 6928 __le32 vdev_id; 6929 __le32 state; 6930 __le32 notification_interval_ms; 6931 __le32 tx_discovery_threshold; 6932 __le32 tx_teardown_threshold; 6933 __le32 rssi_teardown_threshold; 6934 __le32 rssi_delta; 6935 __le32 tdls_options; 6936 __le32 tdls_peer_traffic_ind_window; 6937 __le32 tdls_peer_traffic_response_timeout_ms; 6938 __le32 tdls_puapsd_mask; 6939 __le32 tdls_puapsd_inactivity_time_ms; 6940 __le32 tdls_puapsd_rx_frame_threshold; 6941 __le32 teardown_notification_ms; 6942 __le32 tdls_peer_kickout_threshold; 6943 } __packed; 6944 6945 struct wmi_tdls_peer_capabilities { 6946 __le32 peer_qos; 6947 __le32 buff_sta_support; 6948 __le32 off_chan_support; 6949 __le32 peer_curr_operclass; 6950 __le32 self_curr_operclass; 6951 __le32 peer_chan_len; 6952 __le32 peer_operclass_len; 6953 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6954 __le32 is_peer_responder; 6955 __le32 pref_offchan_num; 6956 __le32 pref_offchan_bw; 6957 struct wmi_channel peer_chan_list[1]; 6958 } __packed; 6959 6960 struct wmi_10_4_tdls_peer_update_cmd { 6961 __le32 vdev_id; 6962 struct wmi_mac_addr peer_macaddr; 6963 __le32 peer_state; 6964 __le32 reserved[4]; 6965 struct wmi_tdls_peer_capabilities peer_capab; 6966 } __packed; 6967 6968 enum wmi_tdls_peer_reason { 6969 WMI_TDLS_TEARDOWN_REASON_TX, 6970 WMI_TDLS_TEARDOWN_REASON_RSSI, 6971 WMI_TDLS_TEARDOWN_REASON_SCAN, 6972 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 6973 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 6974 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 6975 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 6976 WMI_TDLS_ENTER_BUF_STA, 6977 WMI_TDLS_EXIT_BUF_STA, 6978 WMI_TDLS_ENTER_BT_BUSY_MODE, 6979 WMI_TDLS_EXIT_BT_BUSY_MODE, 6980 WMI_TDLS_SCAN_STARTED_EVENT, 6981 WMI_TDLS_SCAN_COMPLETED_EVENT, 6982 }; 6983 6984 enum wmi_tdls_peer_notification { 6985 WMI_TDLS_SHOULD_DISCOVER, 6986 WMI_TDLS_SHOULD_TEARDOWN, 6987 WMI_TDLS_PEER_DISCONNECTED, 6988 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 6989 }; 6990 6991 struct wmi_tdls_peer_event { 6992 struct wmi_mac_addr peer_macaddr; 6993 /* see enum wmi_tdls_peer_notification*/ 6994 __le32 peer_status; 6995 /* see enum wmi_tdls_peer_reason */ 6996 __le32 peer_reason; 6997 __le32 vdev_id; 6998 } __packed; 6999 7000 enum wmi_txbf_conf { 7001 WMI_TXBF_CONF_UNSUPPORTED, 7002 WMI_TXBF_CONF_BEFORE_ASSOC, 7003 WMI_TXBF_CONF_AFTER_ASSOC, 7004 }; 7005 7006 #define WMI_CCA_DETECT_LEVEL_AUTO 0 7007 #define WMI_CCA_DETECT_MARGIN_AUTO 0 7008 7009 struct wmi_pdev_set_adaptive_cca_params { 7010 __le32 enable; 7011 __le32 cca_detect_level; 7012 __le32 cca_detect_margin; 7013 } __packed; 7014 7015 enum wmi_host_platform_type { 7016 WMI_HOST_PLATFORM_HIGH_PERF, 7017 WMI_HOST_PLATFORM_LOW_PERF, 7018 }; 7019 7020 enum wmi_bss_survey_req_type { 7021 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 7022 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 7023 }; 7024 7025 struct wmi_pdev_chan_info_req_cmd { 7026 __le32 type; 7027 __le32 reserved; 7028 } __packed; 7029 7030 struct ath10k; 7031 struct ath10k_vif; 7032 struct ath10k_fw_stats_pdev; 7033 struct ath10k_fw_stats_peer; 7034 struct ath10k_fw_stats; 7035 7036 int ath10k_wmi_attach(struct ath10k *ar); 7037 void ath10k_wmi_detach(struct ath10k *ar); 7038 void ath10k_wmi_free_host_mem(struct ath10k *ar); 7039 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 7040 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 7041 7042 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7043 int ath10k_wmi_connect(struct ath10k *ar); 7044 7045 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7046 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 7047 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 7048 u32 cmd_id); 7049 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 7050 7051 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 7052 struct ath10k_fw_stats_pdev *dst); 7053 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 7054 struct ath10k_fw_stats_pdev *dst); 7055 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 7056 struct ath10k_fw_stats_pdev *dst); 7057 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 7058 struct ath10k_fw_stats_pdev *dst); 7059 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 7060 struct ath10k_fw_stats_peer *dst); 7061 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 7062 struct wmi_host_mem_chunks *chunks); 7063 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 7064 const struct wmi_start_scan_arg *arg); 7065 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 7066 const struct wmi_wmm_params_arg *arg); 7067 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 7068 const struct wmi_channel_arg *arg); 7069 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 7070 7071 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 7072 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 7073 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 7074 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 7075 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 7076 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 7077 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 7078 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 7079 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 7080 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 7081 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 7082 void ath10k_wmi_event_dfs(struct ath10k *ar, 7083 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 7084 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 7085 struct wmi_phyerr_ev_arg *phyerr, 7086 u64 tsf); 7087 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 7088 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 7089 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 7090 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 7091 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 7092 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 7093 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 7094 struct sk_buff *skb); 7095 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 7096 struct sk_buff *skb); 7097 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 7098 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 7099 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 7100 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 7101 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 7102 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 7103 struct sk_buff *skb); 7104 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 7105 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 7106 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 7107 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 7108 struct sk_buff *skb); 7109 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 7110 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 7111 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 7112 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 7113 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 7114 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); 7115 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 7116 int left_len, struct wmi_phyerr_ev_arg *arg); 7117 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 7118 struct ath10k_fw_stats *fw_stats, 7119 char *buf); 7120 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 7121 struct ath10k_fw_stats *fw_stats, 7122 char *buf); 7123 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 7124 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 7125 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 7126 struct ath10k_fw_stats *fw_stats, 7127 char *buf); 7128 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 7129 enum wmi_vdev_subtype subtype); 7130 int ath10k_wmi_barrier(struct ath10k *ar); 7131 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, 7132 u32 num_tx_chain); 7133 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); 7134 7135 #endif /* _WMI_H_ */ 7136